Prior patches ensured that any bio that interacts with a request_queue
is properly associated with a blkg. This makes bio->bi_css unnecessary
as blkg maintains a reference to blkcg already.
This removes the bio field bi_css and transfers corresponding uses to
access via bi_blkg.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Prior patches ensured that all bios are now associated with some blkg.
This now makes bio->bi_css unnecessary as blkg maintains a reference to
the blkcg already.
This patch removes the field bi_css and transfers corresponding uses to
access via bi_blkg.
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=FS7e
-----END PGP SIGNATURE-----
Merge tag 'for-4.19/post-20180822' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
- Set of bcache fixes and changes (Coly)
- The flush warn fix (me)
- Small series of BFQ fixes (Paolo)
- wbt hang fix (Ming)
- blktrace fix (Steven)
- blk-mq hardware queue count update fix (Jianchao)
- Various little fixes
* tag 'for-4.19/post-20180822' of git://git.kernel.dk/linux-block: (31 commits)
block/DAC960.c: make some arrays static const, shrinks object size
blk-mq: sync the update nr_hw_queues with blk_mq_queue_tag_busy_iter
blk-mq: init hctx sched after update ctx and hctx mapping
block: remove duplicate initialization
tracing/blktrace: Fix to allow setting same value
pktcdvd: fix setting of 'ret' error return for a few cases
block: change return type to bool
block, bfq: return nbytes and not zero from struct cftype .write() method
block, bfq: improve code of bfq_bfqq_charge_time
block, bfq: reduce write overcharge
block, bfq: always update the budget of an entity when needed
block, bfq: readd missing reset of parent-entity service
blk-wbt: fix IO hang in wbt_wait()
block: don't warn for flush on read-only device
bcache: add the missing comments for smp_mb()/smp_wmb()
bcache: remove unnecessary space before ioctl function pointer arguments
bcache: add missing SPDX header
bcache: move open brace at end of function definitions to next line
bcache: add static const prefix to char * array declarations
bcache: fix code comments style
...
- Restructure of lockdep and latency tracers
This is the biggest change. Joel Fernandes restructured the hooks
from irqs and preemption disabling and enabling. He got rid of
a lot of the preprocessor #ifdef mess that they caused.
He turned both lockdep and the latency tracers to use trace events
inserted in the preempt/irqs disabling paths. But unfortunately,
these started to cause issues in corner cases. Thus, parts of the
code was reverted back to where lockde and the latency tracers
just get called directly (without using the trace events).
But because the original change cleaned up the code very nicely
we kept that, as well as the trace events for preempt and irqs
disabling, but they are limited to not being called in NMIs.
- Have trace events use SRCU for "rcu idle" calls. This was required
for the preempt/irqs off trace events. But it also had to not
allow them to be called in NMI context. Waiting till Paul makes
an NMI safe SRCU API.
- New notrace SRCU API to allow trace events to use SRCU.
- Addition of mcount-nop option support
- SPDX headers replacing GPL templates.
- Various other fixes and clean ups.
- Some fixes are marked for stable, but were not fully tested
before the merge window opened.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW3ruhRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qiM7AP47NhYdSnCFCRUJfrt6PovXmQtuCHt3
c3QMoGGdvzh9YAEAqcSXwh7uLhpHUp1LjMAPkXdZVwNddf4zJQ1zyxQ+EAU=
=vgEr
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Restructure of lockdep and latency tracers
This is the biggest change. Joel Fernandes restructured the hooks
from irqs and preemption disabling and enabling. He got rid of a lot
of the preprocessor #ifdef mess that they caused.
He turned both lockdep and the latency tracers to use trace events
inserted in the preempt/irqs disabling paths. But unfortunately,
these started to cause issues in corner cases. Thus, parts of the
code was reverted back to where lockdep and the latency tracers just
get called directly (without using the trace events). But because the
original change cleaned up the code very nicely we kept that, as well
as the trace events for preempt and irqs disabling, but they are
limited to not being called in NMIs.
- Have trace events use SRCU for "rcu idle" calls. This was required
for the preempt/irqs off trace events. But it also had to not allow
them to be called in NMI context. Waiting till Paul makes an NMI safe
SRCU API.
- New notrace SRCU API to allow trace events to use SRCU.
- Addition of mcount-nop option support
- SPDX headers replacing GPL templates.
- Various other fixes and clean ups.
- Some fixes are marked for stable, but were not fully tested before
the merge window opened.
* tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits)
tracing: Fix SPDX format headers to use C++ style comments
tracing: Add SPDX License format tags to tracing files
tracing: Add SPDX License format to bpf_trace.c
blktrace: Add SPDX License format header
s390/ftrace: Add -mfentry and -mnop-mcount support
tracing: Add -mcount-nop option support
tracing: Avoid calling cc-option -mrecord-mcount for every Makefile
tracing: Handle CC_FLAGS_FTRACE more accurately
Uprobe: Additional argument arch_uprobe to uprobe_write_opcode()
Uprobes: Simplify uprobe_register() body
tracepoints: Free early tracepoints after RCU is initialized
uprobes: Use synchronize_rcu() not synchronize_sched()
tracing: Fix synchronizing to event changes with tracepoint_synchronize_unregister()
ftrace: Remove unused pointer ftrace_swapper_pid
tracing: More reverting of "tracing: Centralize preemptirq tracepoints and unify their usage"
tracing/irqsoff: Handle preempt_count for different configs
tracing: Partial revert of "tracing: Centralize preemptirq tracepoints and unify their usage"
tracing: irqsoff: Account for additional preempt_disable
trace: Use rcu_dereference_raw for hooks from trace-event subsystem
tracing/kprobes: Fix within_notrace_func() to check only notrace functions
...
Masami Hiramatsu reported:
Current trace-enable attribute in sysfs returns an error
if user writes the same setting value as current one,
e.g.
# cat /sys/block/sda/trace/enable
0
# echo 0 > /sys/block/sda/trace/enable
bash: echo: write error: Invalid argument
# echo 1 > /sys/block/sda/trace/enable
# echo 1 > /sys/block/sda/trace/enable
bash: echo: write error: Device or resource busy
But this is not a preferred behavior, it should ignore
if new setting is same as current one. This fixes the
problem as below.
# cat /sys/block/sda/trace/enable
0
# echo 0 > /sys/block/sda/trace/enable
# echo 1 > /sys/block/sda/trace/enable
# echo 1 > /sys/block/sda/trace/enable
Link: http://lkml.kernel.org/r/20180816103802.08678002@gandalf.local.home
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: cd649b8bb8 ("blktrace: remove sysfs_blk_trace_enable_show/store()")
Reported-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since @blk_debugfs_root couldn't be configured dynamically, we can
save a few memory allocation if it's not there.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A previous commit changed the locking around registration/cleanup,
but direct callers of blk_trace_remove() were missed. This means
that if we hit the error path in setup, we will deadlock on
attempting to re-acquire the queue trace mutex.
Fixes: 1f2cac107c ("blktrace: fix unlocked access to init/start-stop/teardown")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We always pass in blk_trace_bio_get_cgid(q, bio) to blk_add_trace_bio().
Since both are readily available in the function already, kill the
argument.
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Rewrote commit message.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
sg.c calls into the blktrace functions without holding the proper queue
mutex for doing setup, start/stop, or teardown.
Add internal unlocked variants, and export the ones that do the proper
locking.
Fixes: 6da127ad09 ("blktrace: Add blktrace ioctls to SCSI generic devices")
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The lockdep code had reported the following unsafe locking scenario:
CPU0 CPU1
---- ----
lock(s_active#228);
lock(&bdev->bd_mutex/1);
lock(s_active#228);
lock(&bdev->bd_mutex);
*** DEADLOCK ***
The deadlock may happen when one task (CPU1) is trying to delete a
partition in a block device and another task (CPU0) is accessing
tracing sysfs file (e.g. /sys/block/dm-1/trace/act_mask) in that
partition.
The s_active isn't an actual lock. It is a reference count (kn->count)
on the sysfs (kernfs) file. Removal of a sysfs file, however, require
a wait until all the references are gone. The reference count is
treated like a rwsem using lockdep instrumentation code.
The fact that a thread is in the sysfs callback method or in the
ioctl call means there is a reference to the opended sysfs or device
file. That should prevent the underlying block structure from being
removed.
Instead of using bd_mutex in the block_device structure, a new
blk_trace_mutex is now added to the request_queue structure to protect
access to the blk_trace structure.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix typo in patch subject line, and prune a comment detailing how
the code used to work.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This way we don't need a block_device structure to submit I/O. The
block_device has different life time rules from the gendisk and
request_queue and is usually only available when the block device node
is open. Other callers need to explicitly create one (e.g. the lightnvm
passthrough code, or the new nvme multipathing code).
For the actual I/O path all that we need is the gendisk, which exists
once per block device. But given that the block layer also does
partition remapping we additionally need a partition index, which is
used for said remapping in generic_make_request.
Note that all the block drivers generally want request_queue or
sometimes the gendisk, so this removes a layer of indirection all
over the stack.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently cfq/bfq/blk-throttle output cgroup info in trace in their own
way. Now we have standard blktrace API for this, so convert them to use
it.
Note, this changes the behavior a little bit. cgroup info isn't output
by default, we only do this with 'blk_cgroup' option enabled. cgroup
info isn't output as a string by default too, we only do this with
'blk_cgname' option enabled. Also cgroup info is output in different
position of the note string. I think these behavior changes aren't a big
issue (actually we make trace data shorter which is good), since the
blktrace note is solely for debugging.
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
By default we output cgroup id in blktrace. This adds an option to
display cgroup path. Since get cgroup path is a relativly heavy
operation, we don't enable it by default.
with the option enabled, blktrace will output something like this:
dd-1353 [007] d..2 293.015252: 8,0 /test/level D R 24 + 8 [dd]
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently blktrace isn't cgroup aware. blktrace prints out task name of
current context, but the task of current context isn't always in the
cgroup where the BIO comes from. We can't use task name to find out IO
cgroup. For example, Writeback BIOs always comes from flusher thread but
the BIOs are for different blk cgroups. Request could be requeued and
dispatched from completely different tasks. MD/DM are another examples.
This patch tries to fix the gap. We print out cgroup fhandle info in
blktrace. Userspace can use open_by_handle_at() syscall to find the
cgroup by fhandle. Or userspace can use name_to_handle_at() syscall to
find fhandle for a cgroup and use a BPF program to filter out blktrace
for a specific cgroup.
We add a new 'blk_cgroup' trace option for blk tracer. It's default off.
Application which doesn't know the new option isn't affected. When it's
on, we output fhandle info right after blk_io_trace with an extra bit
set in event action. So from application point of view, blktrace with
the option will output new actions.
I didn't change blk trace event yet, since I'm not sure if changing the
trace event output is an ABI issue. If not, I'll do it later.
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace bi_error with a new bi_status to allow for a clear conversion.
Note that device mapper overloaded bi_error with a private value, which
we'll have to keep arround at least for now and thus propagate to a
proper blk_status_t value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
sscanf is a very poor way to parse integer. For example, I input
"discard" for act_mask, it gets 0xd and completely messes up. Using
correct API to do integer parse.
This patch also makes attributes accept any base of integer.
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
We may already have a directory to put the blktrace stuff in if
1. The disk uses blk-mq
2. CONFIG_BLK_DEBUG_FS is enabled
3. We are tracing the whole disk and not a partition
Instead of hardcoding this very specific case, let's use the new
debugfs_lookup(). If the directory exists, we use it, otherwise we
create one and clean it up later.
Fixes: 07e4fead45 ("blk-mq: create debugfs directory tree")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
When I added the blk-mq debugging information to debugfs, I didn't
notice that blktrace also creates a "block" directory in debugfs. Make
them use the same dentry, now created in the core block code. Based on a
patch from Jens.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This can be used to check for fs vs non-fs requests and basically
removes all knowledge of BLOCK_PC specific from the block layer,
as well as preparing for removing the cmd_type field in struct request.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
A couple tweaks to the tracing code:
- trace the request size for all requests
- trace request sector and nr_sectors only for fs requests, enforced by
helpers
- drop SCSI CDB tracing - we have SCSI tracing for this and are going
to me the CDB out of the generic struct request soon.
With this the tracing code stops to know about BLOCK_PC requests entirely,
it's just FS vs passthrough requests now, where the latter includes any
driver-private requests.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Now that we don't need the common flags to overflow outside the range
of a 32-bit type we can encode them the same way for both the bio and
request fields. This in addition allows us to place the operation
first (and make some room for more ops while we're at it) and to
stop having to shift around the operation values.
In addition this allows passing around only one value in the block layer
instead of two (and eventuall also in the file systems, but we can do
that later) and thus clean up a lot of code.
Last but not least this allows decreasing the size of the cmd_flags
field in struct request to 32-bits. Various functions passing this
value could also be updated, but I'd like to avoid the churn for now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Commit 288dab8a35 ("block: add a separate operation type for secure
erase") split REQ_OP_SECURE_ERASE from REQ_OP_DISCARD without considering
all the places REQ_OP_DISCARD was being used to mean either. Fix those.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 288dab8a35 ("block: add a separate operation type for secure erase")
Signed-off-by: Jens Axboe <axboe@fb.com>
Since commit 63a4cc2486, bio->bi_rw contains flags in the lower
portion and the op code in the higher portions. This means that
old code that relies on manually setting bi_rw is most likely
going to be broken. Instead of letting that brokeness linger,
rename the member, to force old and out-of-tree code to break
at compile time instead of at runtime.
No intended functional changes in this commit.
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull block driver updates from Jens Axboe:
"This branch also contains core changes. I've come to the conclusion
that from 4.9 and forward, I'll be doing just a single branch. We
often have dependencies between core and drivers, and it's hard to
always split them up appropriately without pulling core into drivers
when that happens.
That said, this contains:
- separate secure erase type for the core block layer, from
Christoph.
- set of discard fixes, from Christoph.
- bio shrinking fixes from Christoph, as a followup up to the
op/flags change in the core branch.
- map and append request fixes from Christoph.
- NVMeF (NVMe over Fabrics) code from Christoph. This is pretty
exciting!
- nvme-loop fixes from Arnd.
- removal of ->driverfs_dev from Dan, after providing a
device_add_disk() helper.
- bcache fixes from Bhaktipriya and Yijing.
- cdrom subchannel read fix from Vchannaiah.
- set of lightnvm updates from Wenwei, Matias, Johannes, and Javier.
- set of drbd updates and fixes from Fabian, Lars, and Philipp.
- mg_disk error path fix from Bart.
- user notification for failed device add for loop, from Minfei.
- NVMe in general:
+ NVMe delay quirk from Guilherme.
+ SR-IOV support and command retry limits from Keith.
+ fix for memory-less NUMA node from Masayoshi.
+ use UINT_MAX for discard sectors, from Minfei.
+ cancel IO fixes from Ming.
+ don't allocate unused major, from Neil.
+ error code fixup from Dan.
+ use constants for PSDT/FUSE from James.
+ variable init fix from Jay.
+ fabrics fixes from Ming, Sagi, and Wei.
+ various fixes"
* 'for-4.8/drivers' of git://git.kernel.dk/linux-block: (115 commits)
nvme/pci: Provide SR-IOV support
nvme: initialize variable before logical OR'ing it
block: unexport various bio mapping helpers
scsi/osd: open code blk_make_request
target: stop using blk_make_request
block: simplify and export blk_rq_append_bio
block: ensure bios return from blk_get_request are properly initialized
virtio_blk: use blk_rq_map_kern
memstick: don't allow REQ_TYPE_BLOCK_PC requests
block: shrink bio size again
block: simplify and cleanup bvec pool handling
block: get rid of bio_rw and READA
block: don't ignore -EOPNOTSUPP blkdev_issue_write_same
block: introduce BLKDEV_DISCARD_ZERO to fix zeroout
NVMe: don't allocate unused nvme_major
nvme: avoid crashes when node 0 is memoryless node.
nvme: Limit command retries
loop: Make user notify for adding loop device failed
nvme-loop: fix nvme-loop Kconfig dependencies
nvmet: fix return value check in nvmet_subsys_alloc()
...
The blktrace code stores the current time in a 32-bit word in its
user interface. This is a bad idea because 32-bit seconds overflow
at some point.
We probably have until 2106 before this one overflows, as it seems
to use an 'unsigned' variable, but we should confirm that user
space treats it the same way.
Aside from this, we want to stop using 'struct timespec' here,
so I'm adding a comment about the overflow and change the code
to use timespec64 instead to make the loss of range more obvious.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Instead of overloading the discard support with the REQ_SECURE flag.
Use the opportunity to rename the queue flag as well, and remove the
dead checks for this flag in the RAID 1 and RAID 10 drivers that don't
claim support for secure erase.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
To avoid confusion between REQ_OP_FLUSH, which is handled by
request_fn drivers, and upper layers requesting the block layer
perform a flush sequence along with possibly a WRITE, this patch
renames REQ_FLUSH to REQ_PREFLUSH.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This adds a REQ_OP_FLUSH operation that is sent to request_fn
based drivers by the block layer's flush code, instead of
sending requests with the request->cmd_flags REQ_FLUSH bit set.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Have blktrace use the req/bio op accessor to get the REQ_OP.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
BLK_TC_NOTIFY is missed in mask_maps, so we can't print out notify or
set mask with 'notify' name.
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit f4a1d08ce6 introduces a regression. Originally for
BLK_TN_MESSAGE, we add message in trace and return. The commit ignores
the early return and add garbage info.
Signed-off-by: Shaohua Li <shli@fb.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Use the more common logging method with the eventual goal of removing
pr_warning altogether.
Miscellanea:
- Realign arguments
- Coalesce formats
- Add missing space between a few coalesced formats
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [kernel/power/suspend.c]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A _lot_ of ->write() instances were open-coding it; some are
converted to memdup_user_nul(), a lot more remain...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
stable tags to them. I searched through my INBOX just as the merge window
opened and found lots of patches to pull. I ran them through all my tests
and they were in linux-next for a few days.
Features added this release:
----------------------------
o Module globbing. You can now filter function tracing to several
modules. # echo '*:mod:*snd*' > set_ftrace_filter (Dmitry Safonov)
o Tracer specific options are now visible even when the tracer is not
active. It was rather annoying that you can only see and modify tracer
options after enabling the tracer. Now they are in the options/ directory
even when the tracer is not active. Although they are still only visible
when the tracer is active in the trace_options file.
o Trace options are now per instance (although some of the tracer specific
options are global)
o New tracefs file: set_event_pid. If any pid is added to this file, then
all events in the instance will filter out events that are not part of
this pid. sched_switch and sched_wakeup events handle next and the wakee
pids.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWPLQ5AAoJEKKk/i67LK/8CTYIAI1u8DE5QCzv3J0p54jVpNVR
J5FqEU3eXIzd6FS4JXD4nxCeMpUZAy21YnhlZpsnrbJJM5bc9bUsBCwiKKM+MuSZ
ztmy2sgYKkO0h/KUdhNgYJrzis3/Ojquyx9iAqK5ST/Fr+nKYx81akFKjNK53iur
RJRut45sSa8rv11LaL8sgJ6hAWQTc+YkybUdZ5xaMdJmZ6A61T7Y6VzTjbUexuvL
hntCfTjYLtVd8dbfknAnf3B7n/VOO3IFF85wr7ciYR5oEVfPrF8tHmJBlhHExPpX
kaXAiDDRY/UTg/5DQqnp4zmxJoR5BQ2l4pT5PwiLcnwhcphIDNYS8EYUmOYAWjU=
=TjOE
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracking updates from Steven Rostedt:
"Most of the changes are clean ups and small fixes. Some of them have
stable tags to them. I searched through my INBOX just as the merge
window opened and found lots of patches to pull. I ran them through
all my tests and they were in linux-next for a few days.
Features added this release:
----------------------------
- Module globbing. You can now filter function tracing to several
modules. # echo '*:mod:*snd*' > set_ftrace_filter (Dmitry Safonov)
- Tracer specific options are now visible even when the tracer is not
active. It was rather annoying that you can only see and modify
tracer options after enabling the tracer. Now they are in the
options/ directory even when the tracer is not active. Although
they are still only visible when the tracer is active in the
trace_options file.
- Trace options are now per instance (although some of the tracer
specific options are global)
- New tracefs file: set_event_pid. If any pid is added to this file,
then all events in the instance will filter out events that are not
part of this pid. sched_switch and sched_wakeup events handle next
and the wakee pids"
* tag 'trace-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (68 commits)
tracefs: Fix refcount imbalance in start_creating()
tracing: Put back comma for empty fields in boot string parsing
tracing: Apply tracer specific options from kernel command line.
tracing: Add some documentation about set_event_pid
ring_buffer: Remove unneeded smp_wmb() before wakeup of reader benchmark
tracing: Allow dumping traces without tracking trace started cpus
ring_buffer: Fix more races when terminating the producer in the benchmark
ring_buffer: Do no not complete benchmark reader too early
tracing: Remove redundant TP_ARGS redefining
tracing: Rename max_stack_lock to stack_trace_max_lock
tracing: Allow arch-specific stack tracer
recordmcount: arm64: Replace the ignored mcount call into nop
recordmcount: Fix endianness handling bug for nop_mcount
tracepoints: Fix documentation of RCU lockdep checks
tracing: ftrace_event_is_function() can return boolean
tracing: is_legal_op() can return boolean
ring-buffer: rb_event_is_commit() can return boolean
ring-buffer: rb_per_cpu_empty() can return boolean
ring_buffer: ring_buffer_empty{cpu}() can return boolean
ring-buffer: rb_is_reader_page() can return boolean
...
This is really about simplifying the double xchg patterns into
a single cmpxchg, with the same logic. Other than the immediate
cleanup, there are some subtleties this change deals with:
(i) While the load of the old bt is fully ordered wrt everything,
ie:
old_bt = xchg(&q->blk_trace, bt); [barrier]
if (old_bt)
(void) xchg(&q->blk_trace, old_bt); [barrier]
blk_trace could still be changed between the xchg and the old_bt
load. Note that this description is merely theoretical and afaict
very small, but doing everything in a single context with cmpxchg
closes this potential race.
(ii) Ordering guarantees are obviously kept with cmpxchg.
(iii) Gets rid of the hacky-by-nature (void)xchg pattern.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
eviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
In preparation to make trace options per instance, the global trace_flags
needs to be moved from being a global variable to a field within the trace
instance trace_array structure.
There's still more work to do, as there's some functions that use
trace_flags without passing in a way to get to the current_trace array. For
those, the global_trace is used directly (from trace.c). This includes
setting and clearing the trace_flags. This means that when a new instance is
created, it just gets the trace_flags of the global_trace and will not be
able to modify them. Depending on the functions that have access to the
trace_array, the flags of an instance may not affect parts of its trace,
where the global_trace is used. These will be fixed in future changes.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In preparation for having trace options be per instance, the trace_array
needs to be passed to the trace_buffer_unlock_commit(). The
trace_event_buffer_lock_reserve() already passes in the trace_event_file
where the trace_array can be derived from.
Also added a "__init" to the boot up test event plus function tracing
function function_test_events_call().
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently we have two different ways to signal an I/O error on a BIO:
(1) by clearing the BIO_UPTODATE flag
(2) by returning a Linux errno value to the bi_end_io callback
The first one has the drawback of only communicating a single possible
error (-EIO), and the second one has the drawback of not beeing persistent
when bios are queued up, and are not passed along from child to parent
bio in the ever more popular chaining scenario. Having both mechanisms
available has the additional drawback of utterly confusing driver authors
and introducing bugs where various I/O submitters only deal with one of
them, and the others have to add boilerplate code to deal with both kinds
of error returns.
So add a new bi_error field to store an errno value directly in struct
bio and remove the existing mechanisms to clean all this up.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
"monitonic raw". Also some enhancements to make the ring buffer even
faster. But the biggest and most noticeable change is the renaming of
the ftrace* files, structures and variables that have to deal with
trace events.
Over the years I've had several developers tell me about their confusion
with what ftrace is compared to events. Technically, "ftrace" is the
infrastructure to do the function hooks, which include tracing and also
helps with live kernel patching. But the trace events are a separate
entity altogether, and the files that affect the trace events should
not be named "ftrace". These include:
include/trace/ftrace.h -> include/trace/trace_events.h
include/linux/ftrace_event.h -> include/linux/trace_events.h
Also, functions that are specific for trace events have also been renamed:
ftrace_print_*() -> trace_print_*()
(un)register_ftrace_event() -> (un)register_trace_event()
ftrace_event_name() -> trace_event_name()
ftrace_trigger_soft_disabled()-> trace_trigger_soft_disabled()
ftrace_define_fields_##call() -> trace_define_fields_##call()
ftrace_get_offsets_##call() -> trace_get_offsets_##call()
Structures have been renamed:
ftrace_event_file -> trace_event_file
ftrace_event_{call,class} -> trace_event_{call,class}
ftrace_event_buffer -> trace_event_buffer
ftrace_subsystem_dir -> trace_subsystem_dir
ftrace_event_raw_##call -> trace_event_raw_##call
ftrace_event_data_offset_##call-> trace_event_data_offset_##call
ftrace_event_type_funcs_##call -> trace_event_type_funcs_##call
And a few various variables and flags have also been updated.
This has been sitting in linux-next for some time, and I have not heard
a single complaint about this rename breaking anything. Mostly because
these functions, variables and structures are mostly internal to the
tracing system and are seldom (if ever) used by anything external to that.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJViYhVAAoJEEjnJuOKh9ldcJ0IAI+mytwoMAN/CWDE8pXrTrgs
aHlcr1zorSzZ0Lq6lKsWP+V0VGVhP8KWO16vl35HaM5ZB9U+cDzWiGobI8JTHi/3
eeTAPTjQdgrr/L+ZO1ApzS1jYPhN3Xi5L7xublcYMJjKfzU+bcYXg/x8gRt0QbG3
S9QN/kBt0JIIjT7McN64m5JVk2OiU36LxXxwHgCqJvVCPHUrriAdIX7Z5KRpEv13
zxgCN4d7Jiec/FsMW8dkO0vRlVAvudZWLL7oDmdsvNhnLy8nE79UOeHos2c1qifQ
LV4DeQ+2Hlu7w9wxixHuoOgNXDUEiQPJXzPc/CuCahiTL9N/urQSGQDoOVMltR4=
=hkdz
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"This patch series contains several clean ups and even a new trace
clock "monitonic raw". Also some enhancements to make the ring buffer
even faster. But the biggest and most noticeable change is the
renaming of the ftrace* files, structures and variables that have to
deal with trace events.
Over the years I've had several developers tell me about their
confusion with what ftrace is compared to events. Technically,
"ftrace" is the infrastructure to do the function hooks, which include
tracing and also helps with live kernel patching. But the trace
events are a separate entity altogether, and the files that affect the
trace events should not be named "ftrace". These include:
include/trace/ftrace.h -> include/trace/trace_events.h
include/linux/ftrace_event.h -> include/linux/trace_events.h
Also, functions that are specific for trace events have also been renamed:
ftrace_print_*() -> trace_print_*()
(un)register_ftrace_event() -> (un)register_trace_event()
ftrace_event_name() -> trace_event_name()
ftrace_trigger_soft_disabled() -> trace_trigger_soft_disabled()
ftrace_define_fields_##call() -> trace_define_fields_##call()
ftrace_get_offsets_##call() -> trace_get_offsets_##call()
Structures have been renamed:
ftrace_event_file -> trace_event_file
ftrace_event_{call,class} -> trace_event_{call,class}
ftrace_event_buffer -> trace_event_buffer
ftrace_subsystem_dir -> trace_subsystem_dir
ftrace_event_raw_##call -> trace_event_raw_##call
ftrace_event_data_offset_##call-> trace_event_data_offset_##call
ftrace_event_type_funcs_##call -> trace_event_type_funcs_##call
And a few various variables and flags have also been updated.
This has been sitting in linux-next for some time, and I have not
heard a single complaint about this rename breaking anything. Mostly
because these functions, variables and structures are mostly internal
to the tracing system and are seldom (if ever) used by anything
external to that"
* tag 'trace-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits)
ring_buffer: Allow to exit the ring buffer benchmark immediately
ring-buffer-benchmark: Fix the wrong type
ring-buffer-benchmark: Fix the wrong param in module_param
ring-buffer: Add enum names for the context levels
ring-buffer: Remove useless unused tracing_off_permanent()
ring-buffer: Give NMIs a chance to lock the reader_lock
ring-buffer: Add trace_recursive checks to ring_buffer_write()
ring-buffer: Allways do the trace_recursive checks
ring-buffer: Move recursive check to per_cpu descriptor
ring-buffer: Add unlikelys to make fast path the default
tracing: Rename ftrace_get_offsets_##call() to trace_event_get_offsets_##call()
tracing: Rename ftrace_define_fields_##call() to trace_event_define_fields_##call()
tracing: Rename ftrace_event_type_funcs_##call to trace_event_type_funcs_##call
tracing: Rename ftrace_data_offset_##call to trace_event_data_offset_##call
tracing: Rename ftrace_raw_##call event structures to trace_event_raw_##call
tracing: Rename ftrace_trigger_soft_disabled() to trace_trigger_soft_disabled()
tracing: Rename FTRACE_EVENT_FL_* flags to EVENT_FILE_FL_*
tracing: Rename struct ftrace_subsystem_dir to trace_subsystem_dir
tracing: Rename ftrace_event_name() to trace_event_name()
tracing: Rename FTRACE_MAX_EVENT to TRACE_EVENT_TYPE_MAX
...
Part of the disassembly of do_blk_trace_setup:
231b: e8 00 00 00 00 callq 2320 <do_blk_trace_setup+0x50>
231c: R_X86_64_PC32 strlen+0xfffffffffffffffc
2320: eb 0a jmp 232c <do_blk_trace_setup+0x5c>
2322: 66 0f 1f 44 00 00 nopw 0x0(%rax,%rax,1)
2328: 48 83 c3 01 add $0x1,%rbx
232c: 48 39 d8 cmp %rbx,%rax
232f: 76 47 jbe 2378 <do_blk_trace_setup+0xa8>
2331: 41 80 3c 1c 2f cmpb $0x2f,(%r12,%rbx,1)
2336: 75 f0 jne 2328 <do_blk_trace_setup+0x58>
2338: 41 c6 04 1c 5f movb $0x5f,(%r12,%rbx,1)
233d: 4c 89 e7 mov %r12,%rdi
2340: e8 00 00 00 00 callq 2345 <do_blk_trace_setup+0x75>
2341: R_X86_64_PC32 strlen+0xfffffffffffffffc
2345: eb e1 jmp 2328 <do_blk_trace_setup+0x58>
Yep, that's right: gcc isn't smart enough to realize that replacing '/' by
'_' cannot change the strlen(), so we call it again and again (at least
when a '/' is found). Even if gcc were that smart, this construction
would still loop over the string twice, once for the initial strlen() call
and then the open-coded loop.
Let's simply use strreplace() instead.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Liked-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The name "ftrace" really refers to the function hook infrastructure. It
is not about the trace_events. The functions (un)register_ftrace_event() is
really about trace_events, and the name should be register_trace_event()
instead.
Also renamed ftrace_event_reg() to trace_event_reg() for the same reason.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull block driver core update from Jens Axboe:
"This is the pull request for the core block IO changes for 3.19. Not
a huge round this time, mostly lots of little good fixes:
- Fix a bug in sysfs blktrace interface causing a NULL pointer
dereference, when enabled/disabled through that API. From Arianna
Avanzini.
- Various updates/fixes/improvements for blk-mq:
- A set of updates from Bart, mostly fixing buts in the tag
handling.
- Cleanup/code consolidation from Christoph.
- Extend queue_rq API to be able to handle batching issues of IO
requests. NVMe will utilize this shortly. From me.
- A few tag and request handling updates from me.
- Cleanup of the preempt handling for running queues from Paolo.
- Prevent running of unmapped hardware queues from Ming Lei.
- Move the kdump memory limiting check to be in the correct
location, from Shaohua.
- Initialize all software queues at init time from Takashi. This
prevents a kobject warning when CPUs are brought online that
weren't online when a queue was registered.
- Single writeback fix for I_DIRTY clearing from Tejun. Queued with
the core IO changes, since it's just a single fix.
- Version X of the __bio_add_page() segment addition retry from
Maurizio. Hope the Xth time is the charm.
- Documentation fixup for IO scheduler merging from Jan.
- Introduce (and use) generic IO stat accounting helpers for non-rq
drivers, from Gu Zheng.
- Kill off artificial limiting of max sectors in a request from
Christoph"
* 'for-3.19/core' of git://git.kernel.dk/linux-block: (26 commits)
bio: modify __bio_add_page() to accept pages that don't start a new segment
blk-mq: Fix uninitialized kobject at CPU hotplugging
blktrace: don't let the sysfs interface remove trace from running list
blk-mq: Use all available hardware queues
blk-mq: Micro-optimize bt_get()
blk-mq: Fix a race between bt_clear_tag() and bt_get()
blk-mq: Avoid that __bt_get_word() wraps multiple times
blk-mq: Fix a use-after-free
blk-mq: prevent unmapped hw queue from being scheduled
blk-mq: re-check for available tags after running the hardware queue
blk-mq: fix hang in bt_get()
blk-mq: move the kdump check to blk_mq_alloc_tag_set
blk-mq: cleanup tag free handling
blk-mq: use 'nr_cpu_ids' as highest CPU ID count for hwq <-> cpu map
blk: introduce generic io stat accounting help function
blk-mq: handle the single queue case in blk_mq_hctx_next_cpu
genhd: check for int overflow in disk_expand_part_tbl()
blk-mq: add blk_mq_free_hctx_request()
blk-mq: export blk_mq_free_request()
blk-mq: use get_cpu/put_cpu instead of preempt_disable/preempt_enable
...
Currently, blktrace can be started/stopped via its ioctl-based interface
(used by the userspace blktrace tool) or via its ftrace interface. The
function blk_trace_remove_queue(), called each time an "enable" tunable
of the ftrace interface transitions to zero, removes the trace from the
running list, even if no function from the sysfs interface adds it to
such a list. This leads to a null pointer dereference. This commit
changes the blk_trace_remove_queue() function so that it does not remove
the blk_trace from the running list.
v2:
- Now the patch removes the invocation of list_del() instead of
adding an useless if branch, as suggested by Namhyung Kim.
Signed-off-by: Arianna Avanzini <avanzini.arianna@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Checking the return code of every trace_seq_printf() operation and having
to return early if it overflowed makes the code messy.
Using the new trace_seq_has_overflowed() and trace_handle_return() functions
allows us to clean up the code.
In the future, trace_seq_printf() and friends will be turning into void
functions and not returning a value. The trace_seq_has_overflowed() is to
be used instead. This cleanup allows that change to take place.
Cc: Jens Axboe <axboe@fb.com>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Dennis Zhou