Commit Graph

694112 Commits

Author SHA1 Message Date
Jakub Kicinski 85d8e2ba70 nfp: don't reuse pointers in ring dumping
We were reusing skb pointer when reading page frag, since ring
entries contain a union of a skb and frag pointer.  This can
be confusing to people reading the code.  Refactor the code
to read frag pointer directly.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 22:39:28 -07:00
Jakub Kicinski 825b18ab24 nfp: fix copy paste in names and messages regarding vNICs
Data and control vNICs currently use the same area name and
error message.  This could lead to confusion.  Make sure
the error message says "ctrl" in case of control and the
data area is called "nfp.bar0".

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 22:39:28 -07:00
Jakub Kicinski 899a37ade8 nfp: add ethtool statistics for representors
Representors may be associated with both VFs or more importantly
with physical ports.  Allow vNIC and MAC statistics to be read
with ethtool -S on representors.  In case of vNICs we reuse
the vNIC statistic helper, we just need to swap RX and TX to
give statistics the "switch perspective."

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 22:39:28 -07:00
Jakub Kicinski ef0ec676a7 nfp: add pointer to vNIC config memory to nfp_port structure
Simplify the statistics handling code by keeping pointer to vNIC's
config memory in nfp_port.  Note that this is referring to the
representor side of vNICs, vNIC side has the pointer in nfp_net.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 22:39:28 -07:00
Jakub Kicinski 098ce840c9 nfp: report MAC statistics in ethtool
Add reporting of MAC statistics in ethtool.  MAC statistics
are read out from the MAC IP and accumulated by application
FW, therefore their presence depends on the application FW.

Add missing defines and string names for the statistics and
dump them in ethtool -S.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 22:39:28 -07:00
Jakub Kicinski 7344bea140 nfp: store pointer to MAC statistics in nfp_port
Store pointer to device memory containing MAC statistics
in nfp_port.  This simplifies representor code and will
be used to dump those statistics in ethtool as well.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 22:39:28 -07:00
Jakub Kicinski 325945ede6 nfp: split software and hardware vNIC statistics
In preparation for reporting vNIC HW stats on representors
split handling of the SW and HW stats in ethtool -S.
Representors don't have SW stats (since vNIC is assigned
to the VM).

Remove the questionable defines which assume nn variable
exists in the scope.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 22:39:28 -07:00
Jakub Kicinski 634287ba75 nfp: add helper for printing ethtool strings
Add a helper for printing ethtool strings and advancing the
pointer correctly.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 22:39:28 -07:00
Jakub Kicinski 1cfcc97bb1 nfp: don't report standard netdev statistics in ethtool
We have been recently called out as a bad example for reporting
standard netdev statistics as part of ethtool.  Fix that :)

Removing standard statistics allows us to simplify the structure
holding definitions since we no longer have to mux different types
of statistics.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 22:39:27 -07:00
Jakub Kicinski a2f4c3d9bd nfp: allow retreiving management FW logs on representors
Users should be able to dump the management FW logs on any
of the driver's netdevs.  Make the code only depend on the
nfp_app and share it between vNICs and representors.

Storing the dump flag is simply dropped for now, since we
only support the argument being set to 0.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 22:39:27 -07:00
Jakub Kicinski 9e4c2cfc67 nfp: provide ethtool_drvinfo on representors
Extend representors' ethtool ops to show basic info like firmware
version, driver version, and driver name.

While at it don't set drvinfo.n_stats and drvinfo.regdump_len,
core will invoke appropriate handlers to get those.

A helper is added to turn a netdev into nfp_app for convenience.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 22:39:27 -07:00
Jakub Kicinski 06726f3036 nfp: link basic ethtool ops to representors
Start linking ethtool ops to representors.  Begin by adding
a separate ops structure and providing link state.  Next
patches will convert appropriate functions to only use nfp_port,
which will make them reusable on representors.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 22:39:27 -07:00
David S. Miller ef319d4f25 Merge branch 'net-sysfs-related-cleanups'
Stephen Hemminger says:

====================
net: sysfs related cleanups

Network sysfs infrastructure changes. Mostly related to using ro_after_init
to make function tables immutable.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 22:38:55 -07:00
stephen hemminger 6648c65e7e net: style cleanups
Make code closer to current style. Mostly whitespace changes.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 22:38:47 -07:00
stephen hemminger 667e427bc3 net: mark receive queue attributes ro_after_init
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 22:38:46 -07:00
stephen hemminger 2b9c758129 net: make queue attributes ro_after_init
The XPS queue attributes can be ro_after_init.
Also use __ATTR_RX macros to simplify initialization.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 22:38:46 -07:00
stephen hemminger 170c658afc net: make BQL sysfs attributes ro_after_init
Also fix macro to not have ; at end.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 22:38:46 -07:00
stephen hemminger 718ad681ef net: drop unused attribute argument from sysfs queue funcs
The show and store functions don't need/use the attribute.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 22:38:31 -07:00
stephen hemminger ec6cc5993c net: make net sysfs attributes ro_after_init
The attributes of net devices are immutable.

Ideally, attribute groups would contain const attributes
but there are too many places that do modifications of list
during startup (in other code) to allow that.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 22:37:35 -07:00
stephen hemminger 737aec57c6 net: constify net_ns_type_operations
This can be const.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 22:37:27 -07:00
stephen hemminger e6d473e635 net: make net_class ro_after_init
The net_class in sysfs is only modified on init.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 22:37:21 -07:00
stephen hemminger b793dc5c6e net: constify netdev_class_file
These functions are wrapper arount class_create_file which can take a
const attribute.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 22:37:12 -07:00
stephen hemminger d0d6683716 net: don't decrement kobj reference count on init failure
If kobject_init_and_add failed, then the failure path would
decrement the reference count of the queue kobject whose reference
count was already zero.

Fixes: 114cf58021 ("bql: Byte queue limits")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 22:37:03 -07:00
David S. Miller 01d300c577 Merge branch 'amd-xgbe-next'
Tom Lendacky says:

====================
amd-xgbe: AMD XGBE driver updates 2017-08-17

The following updates are included in this driver update series:

- Set the MDIO mode to clause 45 for the 10GBase-T configuration
- Set the MII control width to 8-bits for speeds less than 1Gbps
- Fix an issue to related to module removal when the devices are up
- Fix ethtool statistics related to packet counting of TSO packets
- Add support for device renaming
- Add additional dynamic debug output for the PCS window calculation
- Optimize reading of DMA channel interrupt enablement register
- Add additional dynamic debug output about the hardware features
- Add per queue Tx and Rx ethtool statistics
- Add a macro to clear ethtool_link_ksettings modes
- Convert the driver to use the ethtool_link_ksettings
- Add support for VXLAN offload capabilities
- Add additional ethtool statistics related to VXLAN

This patch series is based on net-next.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 16:30:17 -07:00
Lendacky, Thomas 3010608d03 amd-xgbe: Add additional ethtool statistics
Add some additional statistics for tracking VXLAN packets and checksum
errors.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 16:30:17 -07:00
Lendacky, Thomas 1a510ccf58 amd-xgbe: Add support for VXLAN offload capabilities
The hardware has the capability to perform checksum offload support
(both Tx and Rx) and TSO support for VXLAN packets. Add the support
required to enable this.

The hardware can only support a single VXLAN port for offload. If more
than one VXLAN port is added then the offload capabilities have to be
disabled and can no longer be advertised.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 16:30:17 -07:00
Lendacky, Thomas 85f9feb64b amd-xgbe: Convert to using the new link mode settings
Convert from using the old u32 supported, advertising, etc. link settings
to the new link mode settings that support bit positions / settings
greater than 32 bits.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 16:30:17 -07:00
Lendacky, Thomas 606c07f308 net: ethtool: Add macro to clear a link mode setting
There are currently macros to set and test an ETHTOOL_LINK_MODE_ setting,
but not to clear one. Add a macro to clear an ETHTOOL_LINK_MODE_ setting.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 16:30:17 -07:00
Lendacky, Thomas 80a788c94e amd-xgbe: Add per queue Tx and Rx statistics
Add per queue Tx and Rx packet and byte counts.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 16:30:17 -07:00
Lendacky, Thomas 3be95872e8 amd-xgbe: Add hardware features debug output
Use the dynamic debug support to output information about the hardware
features reported by the device.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 16:30:16 -07:00
Lendacky, Thomas caa575afad amd-xgbe: Optimize DMA channel interrupt enablement
Currently whenever the driver needs to enable or disable interrupts for
a DMA channel it reads the interrupt enable register (IER), updates the
value and then writes the new value back to the IER. Since the hardware
does not change the IER, software can track this value and elimiate the
need to read it each time.

Add the IER value to the channel related data structure and use that as
the base for enabling and disabling interrupts, thus removing the need
for the MMIO read.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 16:30:16 -07:00
Lendacky, Thomas 40452f0ec8 amd-xgbe: Add additional dynamic debug messages
Add some additional dynamic debug message to the driver. The new messages
will provide additional information about the PCS window calculation.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 16:30:16 -07:00
Lendacky, Thomas efbaa82833 amd-xgbe: Add support to handle device renaming
Many of the names used by the driver are based upon the name of the device
found during device probe.  Move the formatting of the names into the
device open function so that any renaming that occurs before the device is
brought up will be accounted for.  This also means moving the creation of
some named workqueues into the device open path.

Add support to register for net events so that if a device is renamed
the corresponding debugfs directory can be renamed.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 16:30:16 -07:00
Lendacky, Thomas 1b631424e8 amd-xgbe: Update TSO packet statistics accuracy
When transmitting a TSO packet, the driver only increments the TSO packet
statistic by one rather than the number of total packets that were sent.
Update the driver to record the total number of packets that resulted from
TSO transmit.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 16:30:16 -07:00
Lendacky, Thomas 25ff96a9dc amd-xgbe: Be sure driver shuts down cleanly on module removal
Sometimes when the driver is being unloaded while the devices are still
up the driver can issue errors.  This is based on timing and the double
invocation of some routines.  The phy_exit() call needs to be run after
the network device has been closed and unregistered from the system.
Also, the phy_exit() does not need to invoke phy_stop() since that will
be called as part of the device closing, so remove that call.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 16:30:16 -07:00
Lendacky, Thomas f087b506ff amd-xgbe: Set the MII control width for the MAC interface
When running in SGMII mode at speeds below 1000Mbps, the auto-negotition
control register must set the MII control width for the MAC interface
to be 8-bits wide.  By default the width is 4-bits.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 16:30:16 -07:00
Lendacky, Thomas 3b1ded4e0b amd-xgbe: Set the MDIO mode for 10000Base-T configuration
Currently the MDIO mode is set to none for the 10000Base-T, which is
incorrect.  The MDIO mode should for this configuration should be
clause 45.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 16:30:16 -07:00
Colin Ian King 1547f538c1 mlx5: ensure 0 is returned when vport is zero
Currently, if vport is zero then then an uninialized return status
in err is returned.  Since the only return status at the end of the
function esw_add_uc_addr is zero for the current set of return paths
we may as well just return 0 rather than err to fix this issue.

Detected by CoverityScan, CID#1452698 ("Uninitialized scalar variable")

Fixes: eeb66cdb68 ("net/mlx5: Separate between E-Switch and MPFS")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 16:28:40 -07:00
Martin KaFai Lau 16a4362573 bpf: Fix map-in-map checking in the verifier
In check_map_func_compatibility(), a 'break' has been accidentally
removed for the BPF_MAP_TYPE_ARRAY_OF_MAPS and BPF_MAP_TYPE_HASH_OF_MAPS
cases.  This patch adds it back.

Fixes: 174a79ff95 ("bpf: sockmap with sk redirect support")
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 16:25:00 -07:00
David S. Miller bd1cc1a729 Merge branch 'xdp-adjust-xdp-redirect-tracepoint'
Jesper Dangaard Brouer says:

====================
xdp: adjust xdp redirect tracepoint

Working on streamlining the tracepoints for XDP.  The eBPF programs
and XDP have no flow-control or queueing.  Investigating using
tracepoint to provide a feedback on XDP_REDIRECT xmit overflow events.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 16:18:47 -07:00
Jesper Dangaard Brouer 4c03bdd7b5 xdp: adjust xdp redirect tracepoint to include return error code
The return error code need to be included in the tracepoint
xdp:xdp_redirect, else its not possible to distinguish successful or
failed XDP_REDIRECT transmits.

XDP have no queuing mechanism. Thus, it is fairly easily to overrun a
NIC transmit queue.  The eBPF program invoking helpers (bpf_redirect
or bpf_redirect_map) to redirect a packet doesn't get any feedback
whether the packet was actually transmitted.

Info on failed transmits in the tracepoint xdp:xdp_redirect, is
interesting as this opens for providing a feedback-loop to the
receiving XDP program.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 16:18:40 -07:00
Jesper Dangaard Brouer d2cee2e5d0 ixgbe: change ndo_xdp_xmit return code on xmit errors
Use errno -ENOSPC ("No space left on device") when the XDP xmit
have no space left on the TX ring buffer, instead of -ENOMEM.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 16:18:31 -07:00
Rick Farrington 3de42f5617 liquidio: remove support for deprecated f/w cmd OCTNET_CMD_RESET_PF
Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 16:11:58 -07:00
Levin, Alexander (Sasha Levin) 0888e372c3 net: inet: diag: expose sockets cgroup classid
This is useful for directly looking up a task based on class id rather than
having to scan through all open file descriptors.

Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 16:10:50 -07:00
Dimitris Michailidis f21e507701 macvlan: add offload features for encapsulation
Currently macvlan devices do not set their hw_enc_features making
encapsulated Tx packets resort to SW fallbacks. Add encapsulation GSO
offloads to ->features as is done for the other GSOs and set
->hw_enc_features.

Signed-off-by: Dimitris Michailidis <dmichail@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 16:06:54 -07:00
Intiyaz Basha d2896116db liquidio: fix Smatch error
Fix Smatch error by not dereferencing iq pointer if it's NULL.

See http://marc.info/?l=kernel-janitors&m=150296723301129&w=2

Also, remove unnecessary parentheses.

Fixes: d314ac2228 ("liquidio: moved liquidio_napi_poll to lio_core.c")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 15:21:14 -07:00
Eric Dumazet 9620fef27e ipv4: convert dst_metrics.refcnt from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 15:14:07 -07:00
David S. Miller 633cefe390 Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Johan Hedberg says:

====================
pull request: bluetooth-next 2017-08-18

Here's one more bluetooth-next pull request for the 4.14 kernel:

 - Multiple fixes for Broadcom controllers
 - Fixes to the bluecard HCI driver
 - New USB ID for Realtek RTL8723BE controller
 - Fix static analyzer warning with kfree

Please let me know if there are any issues pulling. Thanks.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 11:07:46 -07:00
Arnd Bergmann 401481e060 ipv6: fix false-postive maybe-uninitialized warning
Adding a lock around one of the assignments prevents gcc from
tracking the state of the local 'fibmatch' variable, so it can no
longer prove that 'dst' is always initialized, leading to a bogus
warning:

net/ipv6/route.c: In function 'inet6_rtm_getroute':
net/ipv6/route.c:3659:2: error: 'dst' may be used uninitialized in this function [-Werror=maybe-uninitialized]

This moves the other assignment into the same lock to shut up the
warning.

Fixes: 121622dba8 ("ipv6: route: make rtm_getroute not assume rtnl is locked")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 10:47:21 -07:00
David S. Miller 66ff5fa08b Merge branch 'hns3-bug-fixes'
Salil Mehta says:

====================
Misc. Bug fixes for HNS3 Ethernet Driver

This patch-set fixes various bugs reported by community.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18 10:31:56 -07:00