The PowerNV and pSeries platforms now have support for both the XICS
and XIVE IRQ domains.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-23-clg@kaod.org
PHB3s need an extra OPAL call to EOI the interrupt. The call takes an
OPAL HW IRQ number but it is translated into a vector number in OPAL.
Here, we directly use the vector number of the in-the-middle "PNV-MSI"
domain instead of grabbing the OPAL HW IRQ number in the XICS parent
domain.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-22-clg@kaod.org
Passthrough PCI MSI interrupts are detected in KVM with a check on a
specific EOI handler (P8) or on XIVE (P9). We can now check the
PCI-MSI IRQ chip which is cleaner.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-14-clg@kaod.org
This is very similar to the MSI domains of the pSeries platform. The
MSI allocator is directly handled under the Linux PHB in the
in-the-middle "PNV-MSI" domain.
Only the XIVE (P9/P10) parent domain is supported for now. Support for
XICS will come later.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-13-clg@kaod.org
Simply allocate or release the MSI domains when a PHB is inserted in
or removed from the machine.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-11-clg@kaod.org
The MSI domain clears the IRQ with msi_domain_free(), which calls
irq_domain_free_irqs_top(), which clears the handler data. This is a
problem for the XIVE controller since we need to unmap MMIO pages and
free a specific XIVE structure.
The 'msi_free()' handler is called before irq_domain_free_irqs_top()
when the handler data is still available. Use that to clear the XIVE
controller data.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-10-clg@kaod.org
The RTAS firmware can not disable one MSI at a time. It's all or
nothing. We need a custom free IRQ handler for that.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-9-clg@kaod.org
Two IRQ domains are added on top of default machine IRQ domain.
First, the top level "pSeries-PCI-MSI" domain deals with the MSI
specificities. In this domain, the HW IRQ numbers are generated by the
PCI MSI layer, they compose a unique ID for an MSI source with the PCI
device identifier and the MSI vector number.
These numbers can be quite large on a pSeries machine running under
the IBM Hypervisor and /sys/kernel/irq/ and /proc/interrupts will
require small fixes to show them correctly.
Second domain is the in-the-middle "pSeries-MSI" domain which acts as
a proxy between the PCI MSI subsystem and the machine IRQ subsystem.
It usually allocate the MSI vector numbers but, on pSeries machines,
this is done by the RTAS FW and RTAS returns IRQ numbers in the IRQ
number space of the machine. This is why the in-the-middle "pSeries-MSI"
domain has the same HW IRQ numbers as its parent domain.
Only the XIVE (P9/P10) parent domain is supported for now. We still
need to add support for IRQ domain hierarchy under XICS.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-6-clg@kaod.org
This splits the routine setting the MSIs in two parts: allocation of
MSIs for the PCI device at the FW level (RTAS) and the actual mapping
and activation of the IRQs.
rtas_prepare_msi_irqs() will serve as a handler for the PCI MSI domain.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210701132750.1475580-3-clg@kaod.org
The functions get_online_cpus() and put_online_cpus() have been
deprecated during the CPU hotplug rework. They map directly to
cpus_read_lock() and cpus_read_unlock().
Replace deprecated CPU-hotplug functions with the official version.
The behavior remains unchanged.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210803141621.780504-4-bigeasy@linutronix.de
When a CPU is hot added, the CPU ids are taken from the available mask
from the lower possible set. If that set of values was previously used
for a CPU attached to a different node, it appears to an application as
if these CPUs have migrated from one node to another node which is not
expected.
To prevent this, it is needed to record the CPU ids used for each node
and to not reuse them on another node. However, to prevent CPU hot plug
to fail, in the case the CPU ids is starved on a node, the capability to
reuse other nodes’ free CPU ids is kept. A warning is displayed in such
a case to warn the user.
A new CPU bit mask (node_recorded_ids_map) is introduced for each
possible node. It is populated with the CPU onlined at boot time, and
then when a CPU is hot plugged to a node. The bits in that mask remain
when the CPU is hot unplugged, to remind this CPU ids have been used for
this node.
If no id set was found, a retry is made without removing the ids used on
the other nodes to try reusing them. This is the way ids have been
allocated prior to this patch.
The effect of this patch can be seen by removing and adding CPUs using
the Qemu monitor. In the following case, the first CPU from the node 2
is removed, then the first one from the node 1 is removed too. Later,
the first CPU of the node 2 is added back. Without that patch, the
kernel will number these CPUs using the first CPU ids available which
are the ones freed when removing the second CPU of the node 0. This
leads to the CPU ids 16-23 to move from the node 1 to the node 2. With
the patch applied, the CPU ids 32-39 are used since they are the lowest
free ones which have not been used on another node.
At boot time:
[root@vm40 ~]# numactl -H | grep cpus
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
node 1 cpus: 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
node 2 cpus: 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
Vanilla kernel, after the CPU hot unplug/plug operations:
[root@vm40 ~]# numactl -H | grep cpus
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
node 1 cpus: 24 25 26 27 28 29 30 31
node 2 cpus: 16 17 18 19 20 21 22 23 40 41 42 43 44 45 46 47
Patched kernel, after the CPU hot unplug/plug operations:
[root@vm40 ~]# numactl -H | grep cpus
node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
node 1 cpus: 24 25 26 27 28 29 30 31
node 2 cpus: 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210429174908.16613-1-ldufour@linux.ibm.com
After a LPM, the device tree node ibm,dynamic-reconfiguration-memory may be
updated by the hypervisor in the case the NUMA topology of the LPAR's
memory is updated.
This is handled by the kernel, but the memory's node is not updated because
there is no way to move a memory block between nodes from the Linux kernel
point of view.
If later a memory block is added or removed, drmem_update_dt() is called
and it is overwriting the DT node ibm,dynamic-reconfiguration-memory to
match the added or removed LMB. But the LMB's associativity node has not
been updated after the DT node update and thus the node is overwritten by
the Linux's topology instead of the hypervisor one.
Introduce a hook called when the ibm,dynamic-reconfiguration-memory node is
updated to force an update of the LMB's associativity. However, ignore the
call to that hook when the update has been triggered by drmem_update_dt().
Because, in that case, the LMB tree has been used to set the DT property
and thus it doesn't need to be updated back. Since drmem_update_dt() is
called under the protection of the device_hotplug_lock and the hook is
called in the same context, use a simple boolean variable to detect that
call.
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210517090606.56930-1-ldufour@linux.ibm.com
The .map_sg() op now expects an error code instead of zero on failure.
Propagate the error up if vio_dma_iommu_map_sg() fails.
ppc_iommu_map_sg() may fail either because of iommu_range_alloc() or
because of tbl->it_ops->set(). The former only supports returning an
error with DMA_MAPPING_ERROR and an examination of the latter indicates
that it may return arch-specific errors (for example,
tce_buildmulti_pSeriesLP()). Hence, coalesce all of those errors into
-EIO, per the documentation on dma_map_sgtable().
Signed-off-by: Martin Oliveira <martin.oliveira@eideticom.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Geoff Levand <geoff@infradead.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
After LPM, when migrating from a system with security mitigation enabled
to a system with mitigation disabled, the security flavor exposed in
/proc is not correctly set back to 0.
Do not assume the value of the security flavor is set to 0 when entering
init_cpu_char_feature_flags(), so when called after a LPM, the value is
set correctly even if the mitigation are not turned off.
Fixes: 6ce56e1ac3 ("powerpc/pseries: export LPAR security flavor in lparcfg")
Cc: stable@vger.kernel.org # v5.13+
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210805152308.33988-1-ldufour@linux.ibm.com
- Don't use r30 in VDSO code, to avoid breaking existing Go lang programs.
- Change an export symbol to allow non-GPL modules to use spinlocks again.
Thanks to: Paul Menzel, Srikar Dronamraju.
-----BEGIN PGP SIGNATURE-----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=yBq0
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Don't use r30 in VDSO code, to avoid breaking existing Go lang
programs.
- Change an export symbol to allow non-GPL modules to use spinlocks
again.
Thanks to Paul Menzel, and Srikar Dronamraju.
* tag 'powerpc-5.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/vdso: Don't use r30 to avoid breaking Go lang
powerpc/pseries: Fix regression while building external modules
Commit ad6c002831 ("swiotlb: Free tbl memory in swiotlb_exit()")
introduced a set_memory_encrypted() call to swiotlb_exit() so that the
buffer pages are returned to an encrypted state prior to being freed.
Sachin reports that this leads to the following crash on a Power server:
[ 0.010799] software IO TLB: tearing down default memory pool
[ 0.010805] ------------[ cut here ]------------
[ 0.010808] kernel BUG at arch/powerpc/kernel/interrupt.c:98!
Nick spotted that this is because set_memory_encrypted() is issuing an
ultracall which doesn't exist for the processor, and should therefore
be gated by mem_encrypt_active() to mirror the x86 implementation.
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Claire Chang <tientzu@chromium.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Robin Murphy <robin.murphy@arm.com>
Fixes: ad6c002831 ("swiotlb: Free tbl memory in swiotlb_exit()")
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/1905CD70-7656-42AE-99E2-A31FC3812EAC@linux.vnet.ibm.com/
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
With commit c9f3401313 ("powerpc: Always enable queued spinlocks for
64s, disable for others") CONFIG_PPC_QUEUED_SPINLOCKS is always
enabled on ppc64le, external modules that use spinlock APIs are
failing.
ERROR: modpost: GPL-incompatible module XXX.ko uses GPL-only symbol 'shared_processor'
Before the above commit, modules were able to build without any
issues. Also this problem is not seen on other architectures. This
problem can be workaround if CONFIG_UNINLINE_SPIN_UNLOCK is enabled in
the config. However CONFIG_UNINLINE_SPIN_UNLOCK is not enabled by
default and only enabled in certain conditions like
CONFIG_DEBUG_SPINLOCKS is set in the kernel config.
#include <linux/module.h>
spinlock_t spLock;
static int __init spinlock_test_init(void)
{
spin_lock_init(&spLock);
spin_lock(&spLock);
spin_unlock(&spLock);
return 0;
}
static void __exit spinlock_test_exit(void)
{
printk("spinlock_test unloaded\n");
}
module_init(spinlock_test_init);
module_exit(spinlock_test_exit);
MODULE_DESCRIPTION ("spinlock_test");
MODULE_LICENSE ("non-GPL");
MODULE_AUTHOR ("Srikar Dronamraju");
Given that spin locks are one of the basic facilities for module code,
this effectively makes it impossible to build/load almost any non GPL
modules on ppc64le.
This was first reported at https://github.com/openzfs/zfs/issues/11172
Currently shared_processor is exported as GPL only symbol.
Fix this for parity with other architectures by exposing
shared_processor to non-GPL modules too.
Fixes: 14c73bd344 ("powerpc/vcpu: Assume dedicated processors as non-preempt")
Cc: stable@vger.kernel.org # v5.5+
Reported-by: marc.c.dionne@gmail.com
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210729060449.292780-1-srikar@linux.vnet.ibm.com
The driver core ignores the return value of this callback because there
is only little it can do when a device disappears.
This is the final bit of a long lasting cleanup quest where several
buses were converted to also return void from their remove callback.
Additionally some resource leaks were fixed that were caused by drivers
returning an error code in the expectation that the driver won't go
away.
With struct bus_type::remove returning void it's prevented that newly
implemented buses return an ignored error code and so don't anticipate
wrong expectations for driver authors.
Reviewed-by: Tom Rix <trix@redhat.com> (For fpga)
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio)
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts)
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb)
Acked-by: Pali Rohár <pali@kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media)
Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform)
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Juergen Gross <jgross@suse.com> (For xen)
Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd)
Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb)
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus)
Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio)
Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec)
Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack)
Acked-by: Geoff Levand <geoff@infradead.org> (For ps3)
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt)
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th)
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia)
Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI)
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr)
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid)
Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM)
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa)
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire)
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid)
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox)
Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss)
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC)
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the following fallthrough warning:
arch/powerpc/platforms/pasemi/idle.c:45:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/60efbf18.d9n6eXv275OJcc7T%25lkp@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Fix the following fallthrough warning:
arch/powerpc/platforms/powermac/smp.c:149:3: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/60ef0750.I8J+C6KAtb0xVOAa%25lkp@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Fix crashes on 64-bit Book3E due to use of Book3S only mtmsrd instruction.
Fix "scheduling while atomic" warnings at boot due to preempt count underflow.
Two commits fixing our handling of BPF atomic instructions.
Fix error handling in xive when allocating an IPI.
Fix lockup on kernel exec fault on 603.
Thanks to: Bharata B Rao, Cédric Le Goater, Christian Zigotzky, Christophe Leroy, Guenter
Roeck, Jiri Olsa, Naveen N. Rao, Nicholas Piggin, Valentin Schneider.
-----BEGIN PGP SIGNATURE-----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=q3Ag
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Fix crashes on 64-bit Book3E due to use of Book3S only mtmsrd
instruction.
Fix "scheduling while atomic" warnings at boot due to preempt count
underflow.
Two commits fixing our handling of BPF atomic instructions.
Fix error handling in xive when allocating an IPI.
Fix lockup on kernel exec fault on 603.
Thanks to Bharata B Rao, Cédric Le Goater, Christian Zigotzky,
Christophe Leroy, Guenter Roeck, Jiri Olsa, Naveen N. Rao, Nicholas
Piggin, and Valentin Schneider"
* tag 'powerpc-5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/preempt: Don't touch the idle task's preempt_count during hotplug
powerpc/64e: Fix system call illegal mtmsrd instruction
powerpc/xive: Fix error handling when allocating an IPI
powerpc/bpf: Reject atomic ops in ppc32 JIT
powerpc/bpf: Fix detecting BPF atomic instructions
powerpc/mm: Fix lockup on kernel exec fault
Powerpc currently resets a CPU's idle task preempt_count to 0 before
said task starts executing the secondary startup routine (and becomes an
idle task proper).
This conflicts with commit f1a0a376ca ("sched/core: Initialize the
idle task with preemption disabled").
which initializes all of the idle tasks' preempt_count to
PREEMPT_DISABLED during smp_init(). Note that this was superfluous
before said commit, as back then the hotplug machinery would invoke
init_idle() via idle_thread_get(), which would have already reset the
CPU's idle task's preempt_count to PREEMPT_ENABLED.
Get rid of this preempt_count write.
Fixes: f1a0a376ca ("sched/core: Initialize the idle task with preemption disabled")
Reported-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210707183831.2106509-1-valentin.schneider@arm.com
- A big series refactoring parts of our KVM code, and converting some to C.
- Support for ARCH_HAS_SET_MEMORY, and ARCH_HAS_STRICT_MODULE_RWX on some CPUs.
- Support for the Microwatt soft-core.
- Optimisations to our interrupt return path on 64-bit.
- Support for userspace access to the NX GZIP accelerator on PowerVM on Power10.
- Enable KUAP and KUEP by default on 32-bit Book3S CPUs.
- Other smaller features, fixes & cleanups.
Thanks to: Andy Shevchenko, Aneesh Kumar K.V, Arnd Bergmann, Athira Rajeev, Baokun Li,
Benjamin Herrenschmidt, Bharata B Rao, Christophe Leroy, Daniel Axtens, Daniel Henrique
Barboza, Finn Thain, Geoff Levand, Haren Myneni, Jason Wang, Jiapeng Chong, Joel Stanley,
Jordan Niethe, Kajol Jain, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas
Piggin, Nick Desaulniers, Paul Mackerras, Russell Currey, Sathvika Vasireddy, Shaokun
Zhang, Stephen Rothwell, Sudeep Holla, Suraj Jitindar Singh, Tom Rix, Vaibhav Jain,
YueHaibing, Zhang Jianhua, Zhen Lei.
-----BEGIN PGP SIGNATURE-----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=zo4d
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- A big series refactoring parts of our KVM code, and converting some
to C.
- Support for ARCH_HAS_SET_MEMORY, and ARCH_HAS_STRICT_MODULE_RWX on
some CPUs.
- Support for the Microwatt soft-core.
- Optimisations to our interrupt return path on 64-bit.
- Support for userspace access to the NX GZIP accelerator on PowerVM on
Power10.
- Enable KUAP and KUEP by default on 32-bit Book3S CPUs.
- Other smaller features, fixes & cleanups.
Thanks to: Andy Shevchenko, Aneesh Kumar K.V, Arnd Bergmann, Athira
Rajeev, Baokun Li, Benjamin Herrenschmidt, Bharata B Rao, Christophe
Leroy, Daniel Axtens, Daniel Henrique Barboza, Finn Thain, Geoff Levand,
Haren Myneni, Jason Wang, Jiapeng Chong, Joel Stanley, Jordan Niethe,
Kajol Jain, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas
Piggin, Nick Desaulniers, Paul Mackerras, Russell Currey, Sathvika
Vasireddy, Shaokun Zhang, Stephen Rothwell, Sudeep Holla, Suraj Jitindar
Singh, Tom Rix, Vaibhav Jain, YueHaibing, Zhang Jianhua, and Zhen Lei.
* tag 'powerpc-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (218 commits)
powerpc: Only build restart_table.c for 64s
powerpc/64s: move ret_from_fork etc above __end_soft_masked
powerpc/64s/interrupt: clean up interrupt return labels
powerpc/64/interrupt: add missing kprobe annotations on interrupt exit symbols
powerpc/64: enable MSR[EE] in irq replay pt_regs
powerpc/64s/interrupt: preserve regs->softe for NMI interrupts
powerpc/64s: add a table of implicit soft-masked addresses
powerpc/64e: remove implicit soft-masking and interrupt exit restart logic
powerpc/64e: fix CONFIG_RELOCATABLE build warnings
powerpc/64s: fix hash page fault interrupt handler
powerpc/4xx: Fix setup_kuep() on SMP
powerpc/32s: Fix setup_{kuap/kuep}() on SMP
powerpc/interrupt: Use names in check_return_regs_valid()
powerpc/interrupt: Also use exit_must_hard_disable() on PPC32
powerpc/sysfs: Replace sizeof(arr)/sizeof(arr[0]) with ARRAY_SIZE
powerpc/ptrace: Refactor regs_set_return_{msr/ip}
powerpc/ptrace: Move set_return_regs_changed() before regs_set_return_{msr/ip}
powerpc/stacktrace: Fix spurious "stale" traces in raise_backtrace_ipi()
powerpc/pseries/vas: Include irqdomain.h
powerpc: mark local variables around longjmp as volatile
...
Merge more updates from Andrew Morton:
"190 patches.
Subsystems affected by this patch series: mm (hugetlb, userfaultfd,
vmscan, kconfig, proc, z3fold, zbud, ras, mempolicy, memblock,
migration, thp, nommu, kconfig, madvise, memory-hotplug, zswap,
zsmalloc, zram, cleanups, kfence, and hmm), procfs, sysctl, misc,
core-kernel, lib, lz4, checkpatch, init, kprobes, nilfs2, hfs,
signals, exec, kcov, selftests, compress/decompress, and ipc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits)
ipc/util.c: use binary search for max_idx
ipc/sem.c: use READ_ONCE()/WRITE_ONCE() for use_global_lock
ipc: use kmalloc for msg_queue and shmid_kernel
ipc sem: use kvmalloc for sem_undo allocation
lib/decompressors: remove set but not used variabled 'level'
selftests/vm/pkeys: exercise x86 XSAVE init state
selftests/vm/pkeys: refill shadow register after implicit kernel write
selftests/vm/pkeys: handle negative sys_pkey_alloc() return code
selftests/vm/pkeys: fix alloc_random_pkey() to make it really, really random
kcov: add __no_sanitize_coverage to fix noinstr for all architectures
exec: remove checks in __register_bimfmt()
x86: signal: don't do sas_ss_reset() until we are certain that sigframe won't be abandoned
hfsplus: report create_date to kstat.btime
hfsplus: remove unnecessary oom message
nilfs2: remove redundant continue statement in a while-loop
kprobes: remove duplicated strong free_insn_page in x86 and s390
init: print out unknown kernel parameters
checkpatch: do not complain about positive return values starting with EPOLL
checkpatch: improve the indented label test
checkpatch: scripts/spdxcheck.py now requires python3
...
ZONE_[DMA|DMA32] configs have duplicate definitions on platforms that
subscribe to them. Instead, just make them generic options which can be
selected on applicable platforms.
Also only x86/arm64 architectures could enable both ZONE_DMA and
ZONE_DMA32 if EXPERT, add ARCH_HAS_ZONE_DMA_SET to make dma zone
configurable and visible on the two architectures.
Link: https://lkml.kernel.org/r/20210528074557.17768-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> [RISC-V]
Acked-by: Michal Simek <michal.simek@xilinx.com> [microblaze]
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Core changes:
- Cleanup and simplification of common code to invoke the low level
interrupt flow handlers when this invocation requires irqdomain
resolution. Add the necessary core infrastructure.
- Provide a proper interface for modular PMU drivers to set the
interrupt affinity.
- Add a request flag which allows to exclude interrupts from spurious
interrupt detection. Useful especially for IPI handlers which always
return IRQ_HANDLED which turns the spurious interrupt detection into a
pointless waste of CPU cycles.
Driver changes:
- Bulk convert interrupt chip drivers to the new irqdomain low level flow
handler invocation mechanism.
- Add device tree bindings for the Renesas R-Car M3-W+ SoC
- Enable modular build of the Qualcomm PDC driver
- The usual small fixes and improvements.
-----BEGIN PGP SIGNATURE-----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=FIKh
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2021-06-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for the interrupt subsystem:
Core changes:
- Cleanup and simplification of common code to invoke the low level
interrupt flow handlers when this invocation requires irqdomain
resolution. Add the necessary core infrastructure.
- Provide a proper interface for modular PMU drivers to set the
interrupt affinity.
- Add a request flag which allows to exclude interrupts from spurious
interrupt detection. Useful especially for IPI handlers which
always return IRQ_HANDLED which turns the spurious interrupt
detection into a pointless waste of CPU cycles.
Driver changes:
- Bulk convert interrupt chip drivers to the new irqdomain low level
flow handler invocation mechanism.
- Add device tree bindings for the Renesas R-Car M3-W+ SoC
- Enable modular build of the Qualcomm PDC driver
- The usual small fixes and improvements"
* tag 'irq-core-2021-06-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
dt-bindings: interrupt-controller: arm,gic-v3: Describe GICv3 optional properties
irqchip: gic-pm: Remove redundant error log of clock bulk
irqchip/sun4i: Remove unnecessary oom message
irqchip/irq-imx-gpcv2: Remove unnecessary oom message
irqchip/imgpdc: Remove unnecessary oom message
irqchip/gic-v3-its: Remove unnecessary oom message
irqchip/gic-v2m: Remove unnecessary oom message
irqchip/exynos-combiner: Remove unnecessary oom message
irqchip: Bulk conversion to generic_handle_domain_irq()
genirq: Move non-irqdomain handle_domain_irq() handling into ARM's handle_IRQ()
genirq: Add generic_handle_domain_irq() helper
irqchip/nvic: Convert from handle_IRQ() to handle_domain_irq()
irqdesc: Fix __handle_domain_irq() comment
genirq: Use irq_resolve_mapping() to implement __handle_domain_irq() and co
irqdomain: Introduce irq_resolve_mapping()
irqdomain: Protect the linear revmap with RCU
irqdomain: Cache irq_data instead of a virq number in the revmap
irqdomain: Use struct_size() helper when allocating irqdomain
irqdomain: Make normal and nomap irqdomains exclusive
powerpc: Move the use of irq_domain_add_nomap() behind a config option
...
There are patches in flight to break the dependency between asm/irq.h
and linux/irqdomain.h, which would break compilation of vas.c because it
needs the declaration of irq_create_mapping() etc.
So add an explicit include of irqdomain.h to avoid that becoming a
problem in future.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210625045337.3197833-1-mpe@ellerman.id.au
Instead of making bare calls to get-sensor-state, use
rtas_get_sensor(), which correctly handles busy and extended delay
statuses.
Fixes: ab519a011c ("powerpc/pseries: Kernel DLPAR Infrastructure")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210504025329.1713878-1-nathanl@linux.ibm.com
There is a spelling mistake "byes" -> "bytes" in a comment of
function drc_pmem_query_stats(). Fix that typo.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210418074003.6651-1-kjain@linux.ibm.com
Commit a21d1becaa ("powerpc: Reintroduce is_kvm_guest() as a fast-path
check") added is_kvm_guest() and changed kvm_para_available() to use it.
is_kvm_guest() checks a static key, kvm_guest, and that static key is
set in check_kvm_guest().
The problem is check_kvm_guest() is only called on pseries, and even
then only in some configurations. That means is_kvm_guest() always
returns false on all non-pseries and some pseries depending on
configuration. That's a bug.
For PR KVM guests this is noticable because they no longer do live
patching of themselves, which can be detected by the omission of a
message in dmesg such as:
KVM: Live patching for a fast VM worked
To fix it make check_kvm_guest() an initcall, to ensure it's always
called at boot. It needs to be core so that it runs before
kvm_guest_init() which is postcore. To be an initcall it needs to return
int, where 0 means success, so update that.
We still call it manually in pSeries_smp_probe(), because that runs
before init calls are run.
Fixes: a21d1becaa ("powerpc: Reintroduce is_kvm_guest() as a fast-path check")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210623130514.2543232-1-mpe@ellerman.id.au
When we boot from open firmware (OF) using PPC_OF_BOOT_TRAMPOLINE, aka.
prom_init, we run parts of the kernel at an address other than the link
address. That happens because OF loads the kernel above zero (OF is at
zero) and we run prom_init before copying the kernel down to zero.
Currently that works even for non-relocatable kernels, because we do
various fixups to the prom_init code to make it run where it's loaded.
However those fixups are not sufficient if the kernel becomes large
enough. In that case prom_init()'s final call to __start() can end up
generating a plt branch:
bl c000000002000018 <00000078.plt_branch.__start>
That results in the kernel jumping to the linked address of __start,
0xc000000000000000, when really it needs to jump to the
0xc000000000000000 + the runtime address because the kernel is still
running at the load address.
We could do further shenanigans to handle that, see Jordan's patch for
example:
https://lore.kernel.org/linuxppc-dev/20210421021721.1539289-1-jniethe5@gmail.com
However it is much simpler to just require a kernel with prom_init() to
be built relocatable. The result works in all configurations without
further work, and requires less code.
This should have no effect on most people, as our defconfigs and
essentially all distro configs already have RELOCATABLE enabled.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210623130454.2542945-1-mpe@ellerman.id.au
Persistent memory devices like NVDIMMs can loose cached writes in case
something prevents flush on power-fail. Such situations are termed as
dirty shutdown and are exposed to applications as
last-shutdown-state (LSS) flag and a dirty-shutdown-counter(DSC) as
described at [1]. The latter being useful in conditions where multiple
applications want to detect a dirty shutdown event without racing with
one another.
PAPR-NVDIMMs have so far only exposed LSS style flags to indicate a
dirty-shutdown-state. This patch further adds support for DSC via the
"ibm,persistence-failed-count" device tree property of an NVDIMM. This
property is a monotonic increasing 64-bit counter thats an indication
of number of times an NVDIMM has encountered a dirty-shutdown event
causing persistence loss.
Since this value is not expected to change after system-boot hence
papr_scm reads & caches its value during NVDIMM probe and exposes it
as a PAPR sysfs attributed named 'dirty_shutdown' to match the name of
similarly named NFIT sysfs attribute. Also this value is available to
libnvdimm via PAPR_PDSM_HEALTH payload. 'struct nd_papr_pdsm_health'
has been extended to add a new member called 'dimm_dsc' presence of
which is indicated by the newly introduced PDSM_DIMM_DSC_VALID flag.
References:
[1] https://pmem.io/documents/Dirty_Shutdown_Handling-V1.0.pdf
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210624080621.252038-1-vaibhav@linux.ibm.com
In case performance stats for an nvdimm are not available, reading the
'perf_stats' sysfs file returns an -ENOENT error. A better approach is
to make the 'perf_stats' file entirely invisible to indicate that
performance stats for an nvdimm are unavailable.
So this patch updates 'papr_nd_attribute_group' to add a 'is_visible'
callback implemented as newly introduced 'papr_nd_attribute_visible()'
that returns an appropriate mode in case performance stats aren't
supported in a given nvdimm.
Also the initialization of 'papr_scm_priv.stat_buffer_len' is moved
from papr_scm_nvdimm_init() to papr_scm_probe() so that it value is
available when 'papr_nd_attribute_visible()' is called during nvdimm
initialization.
Even though 'perf_stats' attribute is available since v5.9, there are
no known user-space tools/scripts that are dependent on presence of its
sysfs file. Hence I dont expect any user-space breakage with this
patch.
Fixes: 2d02bf835e ("powerpc/papr_scm: Fetch nvdimm performance stats from PHYP")
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210513092349.285021-1-vaibhav@linux.ibm.com
klimit is a global variable initialised at build time with the
value of _end.
This variable is never modified, so _end symbol can be used directly.
Remove klimit.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9fa9ba6807c17f93f35a582c199c646c4a8bfd9c.1622800638.git.christophe.leroy@csgroup.eu
Parse to and export from UUID own type, before dereferencing.
This also fixes wrong comment (Little Endian UUID is something else)
and should eliminate the direct strict types assignments.
Fixes: 43001c52b6 ("powerpc/papr_scm: Use ibm,unit-guid as the iset cookie")
Fixes: 259a948c4b ("powerpc/pseries/scm: Use a specific endian format for storing uuid from the device tree")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210616134303.58185-1-andriy.shevchenko@linux.intel.com
The validation done at the start of dlpar_memory_add_by_ic() is an all
of nothing scenario - if any LMBs in the range is marked as RESERVED we
can fail right away.
We then can remove the 'lmbs_available' var and its check with
'lmbs_to_add' since the whole LMB range was already validated in the
previous step.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210622133923.295373-4-danielhb413@gmail.com
After a successful dlpar_add_lmb() call the LMB is marked as reserved.
Later on, depending whether we added enough LMBs or not, we rely on
the marked LMBs to see which ones might need to be removed, and we
remove the reservation of all of them.
These are done in for_each_drmem_lmb() loops without any break
condition. This means that we're going to check all LMBs of the partition
even after going through all the reserved ones.
This patch adds break conditions in both loops to avoid this. The
'lmbs_added' variable was renamed to 'lmbs_reserved', and it's now
being decremented each time a lmb reservation is removed, indicating
if there are still marked LMBs to be processed.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210622133923.295373-3-danielhb413@gmail.com
The function is counting reserved LMBs as available to be added, but
they aren't. This will cause the function to miscalculate the available
LMBs and can trigger errors later on when executing dlpar_add_lmb().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210622133923.295373-2-danielhb413@gmail.com
When an interrupt is taken, the SRR registers are set to return to where
it left off. Unless they are modified in the meantime, or the return
address or MSR are modified, there is no need to reload these registers
when returning from interrupt.
Introduce per-CPU flags that track the validity of SRR and HSRR
registers. These are cleared when returning from interrupt, when
using the registers for something else (e.g., OPAL calls), when
adjusting the return address or MSR of a context, and when context
switching (which changes the return address and MSR).
This improves the performance of interrupt returns.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fold in fixup patch from Nick]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210617155116.2167984-5-npiggin@gmail.com
Microwatt's hardware RNG is accessed using the DARN instruction.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/YMwXPHlV/ZleiQUY@thinks.paulus.ozlabs.org
This adds support to the Microwatt platform to use the standard
16550-style UART which available in the standalone Microwatt FPGA.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/YMwXGCTzedpQje7r@thinks.paulus.ozlabs.org
This is a simple native ICS backend that matches the layout of
the Microwatt implementation of ICS.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
[mpe: Add empty ics_native_init() to unbreak non-microwatt builds]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
fixup-ics
Link: https://lore.kernel.org/r/YMwW8cxrwB2W5EUN@thinks.paulus.ozlabs.org
Just like any other embedded platform.
Add an empty soc node.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/YMwWx98+PMibZq/G@thinks.paulus.ozlabs.org
Microwatt is a FPGA-based implementation of the Power ISA. It
currently only implements little-endian 64-bit mode, and does
not (yet) support SMP, VMX, VSX or transactional memory. It has an
optional FPU, and an optional MMU (required for running Linux,
obviously) which implements a configurable radix tree but not
hypervisor mode or nested radix translation.
This adds a new machine type to support FPGA-based SoCs with a
Microwatt core. CONFIG_MATH_EMULATION can be selected for Microwatt
SOCs which don't have the FPU.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/YMwWbZVREsVug9R0@thinks.paulus.ozlabs.org
NX generates an interrupt when sees a fault on the user space
buffer and the hypervisor forwards that interrupt to OS. Then
the kernel handles the interrupt by issuing H_GET_NX_FAULT hcall
to retrieve the fault CRB information.
This patch also adds changes to setup and free IRQ per each
window and also handles the fault by updating the CSB.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b8fc66dcb783d06a099a303e5cfc69087bb3357a.camel@linux.ibm.com
This patch adds VAS window allocatioa/close with the corresponding
hcalls. Also changes to integrate with the existing user space VAS
API and provide register/unregister functions to NX pseries driver.
The driver register function is used to create the user space
interface (/dev/crypto/nx-gzip) and unregister to remove this entry.
The user space process opens this device node and makes an ioctl
to allocate VAS window. The close interface is used to deallocate
window.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e8d956bace3f182c4d2e66e343ff37cb0391d1fd.camel@linux.ibm.com
The hypervisor provides VAS capabilities for GZIP default and QoS
features. These capabilities gives information for the specific
features such as total number of credits available in LPAR,
maximum credits allowed per window, maximum credits allowed in
LPAR, whether usermode copy/paste is supported, and etc.
This patch adds the following:
- Retrieve all features that are provided by hypervisor using
H_QUERY_VAS_CAPABILITIES hcall with 0 as feature type.
- Retrieve capabilities for the specific feature using the same
hcall and the feature type (1 for QoS and 2 for default type).
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/177c88608cb88f7b87d1c546103f18cec6c056b4.camel@linux.ibm.com
This patch adds the following hcall wrapper functions to allocate,
modify and deallocate VAS windows, and retrieve VAS capabilities.
H_ALLOCATE_VAS_WINDOW: Allocate VAS window
H_DEALLOCATE_VAS_WINDOW: Close VAS window
H_MODIFY_VAS_WINDOW: Setup window before using
H_QUERY_VAS_CAPABILITIES: Get VAS capabilities
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/40fb02a4d56ca4e240b074a15029082055be5997.camel@linux.ibm.com
This patch adds hcalls and other definitions. Also define structs
that are used in VAS implementation on PowerVM.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b4b8c594c27ee4aa6be9dc6dc4ee7331571cbbe8.camel@linux.ibm.com
Many elements in vas_struct are used on PowerNV and PowerVM
platforms. vas_window is used for both TX and RX windows on
PowerNV and for TX windows on PowerVM. So some elements are
specific to these platforms.
So this patch defines common vas_window and platform
specific window structs (pnv_vas_window on PowerNV). Also adds
the corresponding changes in PowerNV vas code.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1698c35c158dfe52c6d2166667823d3d4a463353.camel@linux.ibm.com
If a coprocessor encounters an error translating an address, the
VAS will cause an interrupt in the host. The kernel processes
the fault by updating CSB. This functionality is same for both
powerNV and pseries. So this patch moves these functions to
common vas-api.c and the actual functionality is not changed.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bf8d5b0770fa1ef5cba88c96580caa08d999d3b5.camel@linux.ibm.com
Take pid and mm references when each window opens and drops during
close. This functionality is needed for powerNV and pseries. So
this patch defines the existing code as functions in common book3s
platform vas-api.c
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2fa40df962250a737c804e58202924717b39e381.camel@linux.ibm.com
PowerNV uses registers to open/close VAS windows, and getting the
paste address. Whereas the hypervisor calls are used on PowerVM.
This patch adds the platform specific user space window operations
and register with the common VAS user space interface.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f85091f4ace67f951ac04d60394d67b21e2f5d3c.camel@linux.ibm.com
powerNV and pseries drivers register / unregister to the corresponding
platform specific VAS separately. Then these VAS functions call the
common API with the specific window operations. So rename powerNV VAS
API register/unregister functions.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9db00d58dbdcb7cfc07a1df95f3d2a9e3e5d746a.camel@linux.ibm.com
The pseries platform will share vas and nx code and interfaces
with the PowerNV platform, so create the
arch/powerpc/platforms/book3s/ directory and move VAS API code
there. Functionality is not changed.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e05c8db17b9eabe3545b902d034238e4c6c08180.camel@linux.ibm.com
The kernel handles the NX fault by updating CSB or sending
signal to process. In multithread applications, children can
open VAS windows and can exit without closing them. But the
parent can continue to send NX requests with these windows. To
prevent pid reuse, reference will be taken on pid and tgid
when the window is opened and release them during window close.
The current code is not releasing the tgid reference which can
cause pid leak and this patch fixes the issue.
Fixes: db1c08a740 ("powerpc/vas: Take reference to PID and mm for user space windows")
Cc: stable@vger.kernel.org # 5.8+
Reported-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/6020fc4d444864fe20f7dcdc5edfe53e67480a1c.camel@linux.ibm.com
Merge some powerpc KVM patches from our topic branch.
In particular this brings in Nick's big series rewriting parts of the
guest entry/exit path in C.
Conflicts:
arch/powerpc/kernel/security.c
arch/powerpc/kvm/book3s_hv_rmhandlers.S
Now that KUAP and KUEP have been significantly optimised and can be
disabled at boot time using 'nosmap' and 'nosmep' kernel parameters,
them can be active by default like in other powerpc platforms.
It is still possible to disable them completely in the configuration.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/86c7c74a3ba5312daea7e9658b096e2bcc6f4b64.1622708530.git.christophe.leroy@csgroup.eu
'struct ppc_inst' is an internal representation of an instruction, but
in-memory instructions are and will remain a table of 'u32' forever.
Replace all 'struct ppc_inst *' used for locating an instruction in
memory by 'u32 *'. This removes a lot of undue casts to 'struct
ppc_inst *'.
It also helps locating ab-use of 'struct ppc_inst' dereference.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Fix ppc_inst_next(), use u32 instead of unsigned int]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7062722b087228e42cbd896e39bfdf526d6a340a.1621516826.git.christophe.leroy@csgroup.eu
Fixes gcc '-Wunused-but-set-variable' warning:
# WARNING: Fixes tag on line 3 doesn't match correct format
# WARNING: Fixes tag on line 3 doesn't match correct format
# WARNING: Fixes tag on line 3 doesn't match correct format
# WARNING: Fixes tag on line 3 doesn't match correct format
# WARNING: Fixes tag on line 3 doesn't match correct format
# WARNING: Fixes tag on line 3 doesn't match correct format
arch/powerpc/platforms/cell/spider-pci.c: In function 'spiderpci_io_flush':
arch/powerpc/platforms/cell/spider-pci.c:28:6: warning:
variable ‘val’ set but not used [-Wunused-but-set-variable]
It never used since introduction.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210601085319.140461-1-libaokun1@huawei.com
Fixes gcc '-Wunused-but-set-variable' warning:
# WARNING: Fixes tag on line 3 doesn't match correct format
# WARNING: Fixes tag on line 3 doesn't match correct format
# WARNING: Fixes tag on line 3 doesn't match correct format
# WARNING: Fixes tag on line 3 doesn't match correct format
# WARNING: Fixes tag on line 3 doesn't match correct format
arch/powerpc/platforms/cell/spufs/switch.c: In function 'check_ppu_mb_stat':
arch/powerpc/platforms/cell/spufs/switch.c:1660:6: warning:
variable ‘dummy’ set but not used [-Wunused-but-set-variable]
arch/powerpc/platforms/cell/spufs/switch.c: In function 'check_ppuint_mb_stat':
arch/powerpc/platforms/cell/spufs/switch.c:1675:6: warning:
variable ‘dummy’ set but not used [-Wunused-but-set-variable]
It never used since introduction.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210601085127.139598-1-libaokun1@huawei.com
With gcc 10.3, there is this compiler error:
compiler.h:56:26: error: this statement may fall through
mpc52xx_gpt.c:586:2: note: here
586 | case WDIOC_GETTIMEOUT:
| ^~~~
So add the fallthrough pseudo keyword.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210601190200.2637776-1-trix@redhat.com
POWER9 and later processors always go via the P9 guest entry path now.
Remove the remaining support from the P7/8 path.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210528090752.3542186-33-npiggin@gmail.com
Only a handful of old PPC systems are still using the old 'nomap'
variant of the irqdomain library. Move the associated definitions
behind a configuration option, which will allow us to make some
more radical changes.
Signed-off-by: Marc Zyngier <maz@kernel.org>
irq_domain_add_legacy_isa is a pain. It only exists for the benefit of
two PPC-specific drivers, and creates an ugly dependency between asm/irq.h
and linux/irqdomain.h
Instead, let's convert these two drivers to irq_domain_add_legacy(),
stop using NUM_ISA_INTERRUPTS by directly setting NR_IRQS_LEGACY.
The dependency cannot be broken yet as there is a lot of PPC-related
code that depends on it, but that's the first step towards it.
A followup patch will remove irq_domain_add_legacy_isa.
Signed-off-by: Marc Zyngier <maz@kernel.org>
A bunch of PPC files are missing the inclusion of linux/of.h and
linux/irqdomain.h, relying on transitive inclusion from another
file.
As we are about to break this dependency, make sure these dependencies
are explicit.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Commit f959dcd6dd (dma-direct: Fix
potential NULL pointer dereference) added a null check on the
dma_mask pointer of the kernel's device structure.
Add a dma_mask variable to the ps3_dma_region structure and set
the device structure's dma_mask pointer to point to this new variable.
Fixes runtime errors like these:
# WARNING: Fixes tag on line 10 doesn't match correct format
# WARNING: Fixes tag on line 10 doesn't match correct format
ps3_system_bus_match:349: dev=8.0(sb_01), drv=8.0(ps3flash): match
WARNING: CPU: 0 PID: 1 at kernel/dma/mapping.c:151 .dma_map_page_attrs+0x34/0x1e0
ps3flash sb_01: ps3stor_setup:193: map DMA region failed
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/562d0c9ea0100a30c3b186bcc7adb34b0bbd2cd7.1622746428.git.geoff@infradead.org
Add a new sysfs entry /sys/firmware/ps3/fw-version that exports
the PS3's firmware version.
The firmware version is available through an LV1 hypercall, and we've
been printing it to the boot log, but haven't provided an easy way for
user utilities to get it.
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/41509b2da647cd34b1331cc4756c8774b1e284eb.1622822173.git.geoff@infradead.org
We don't need the 'lmbs_available' variable to count the valid LMBs and
to check if we have less than 'lmbs_to_remove'. We must ensure that the
entire LMB range must be removed, so we can error out immediately if any
LMB in the range is marked as reserved.
Add a couple of comments explaining the reasoning behind the differences
we have in this function in contrast to what it is done in its sister
function, dlpar_memory_remove_by_count().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210512202809.95363-5-danielhb413@gmail.com
After marking the LMBs as reserved depending on dlpar_remove_lmb() rc,
we evaluate whether we need to add the LMBs back or if we can release
the LMB DRCs. In both cases, a for_each_drmem_lmb() loop without a break
condition is used. This means that we're going to cycle through all LMBs
of the partition even after we're done with what we were going to do.
This patch adds break conditions in both loops to avoid this. The
'lmbs_removed' variable was renamed to 'lmbs_reserved', and it's now
being decremented each time a lmb reservation is removed, indicating
that the operation we're doing (adding back LMBs or releasing DRCs) is
completed.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210512202809.95363-4-danielhb413@gmail.com
DRCONF_MEM_RESERVED is a flag that represents the "Reserved Memory"
status in LOPAR v2.10, section 4.2.8. If a LMB is marked as reserved,
quoting LOPAR, "is not to be used or altered by the base OS". This flag
is read only in the kernel, being set by the firmware/hypervisor in the
DT. As an example, QEMU will set this flag in hw/ppc/spapr.c,
spapr_dt_dynamic_memory().
lmb_is_removable() does not check for DRCONF_MEM_RESERVED. This function
is used in dlpar_remove_lmb() as a guard before the removal logic. Since
it is failing to check for !RESERVED, dlpar_remove_lmb() will fail in a
later stage instead of failing in the validation when receiving a
reserved LMB as input.
lmb_is_removable() is also used in dlpar_memory_remove_by_count() to
evaluate if we have enough LMBs to complete the request. The missing
!RESERVED check in this case is causing dlpar_memory_remove_by_count()
to miscalculate the number of elegible LMBs for the removal, and can
make it error out later on instead of failing in the validation with the
'not enough LMBs to satisfy request' message.
Making a DRCONF_MEM_RESERVED check in lmb_is_removable() fixes all these
issues.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210512202809.95363-3-danielhb413@gmail.com
As previously done in dlpar_cpu_remove() for CPUs, this patch changes
dlpar_memory_remove_by_ic() to unisolate the LMB DRC when the LMB is
failed to be removed. The hypervisor, seeing a LMB DRC that was supposed
to be removed being unisolated instead, can do error recovery on its
side.
This change is done in dlpar_memory_remove_by_ic() only because, as of
today, only QEMU is using this code path for error recovery (via the
PSERIES_HP_ELOG_ID_DRC_IC event). phyp treats it as a no-op.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210512202809.95363-2-danielhb413@gmail.com
The statement of the last "if (xxx)" branch is the same as the "else"
branch. Delete it to simplify code.
No functional change.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210510131924.3907-1-thunder.leizhen@huawei.com
dlpar_memory_remove() is never used, so can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210514071041.17432-1-yuehaibing@huawei.com
Currently drc_pmem_qeury_stats() generates a dev_err in case
"Enable Performance Information Collection" feature is disabled from
HMC or performance stats are not available for an nvdimm. The error is
of the form below:
papr_scm ibm,persistent-memory:ibm,pmemory@44104001: Failed to query
performance stats, Err:-10
This error message confuses users as it implies a possible problem
with the nvdimm even though its due to a disabled/unavailable
feature. We fix this by explicitly handling the H_AUTHORITY and
H_UNSUPPORTED errors from the H_SCM_PERFORMANCE_STATS hcall.
In case of H_AUTHORITY error an info message is logged instead of an
error, saying that "Permission denied while accessing performance
stats" and an EPERM error is returned back.
In case of H_UNSUPPORTED error we return a EOPNOTSUPP error back from
drc_pmem_query_stats() indicating that performance stats-query
operation is not supported on this nvdimm.
Fixes: 2d02bf835e ("powerpc/papr_scm: Fetch nvdimm performance stats from PHYP")
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210508043642.114076-1-vaibhav@linux.ibm.com
The hcall tracing code has a recursion check built in, which skips
tracing if we are already tracing an hcall.
However if the tracing code has problems with recursion, this check
may not catch all cases because the tracing code could be invoked from
a different tracepoint first, then make an hcall that gets traced,
then recurse.
Add an explicit warning if recursion is detected here, which might help
to notice tracing code making hcalls. Really the core trace code should
have its own recursion checking and warnings though.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210508101455.1578318-5-npiggin@gmail.com
Rather than special-case H_CEDE in the hcall trace wrappers, make the
idle H_CEDE call use plpar_hcall_norets_notrace().
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210508101455.1578318-4-npiggin@gmail.com
This doesn't seem very useful to trace before the recursion check, even
if the ftrace code has any recursion checks of its own. Be on the safe
side and don't trace the hcall trace wrappers.
Reported-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210508101455.1578318-3-npiggin@gmail.com
The paravit queued spinlock slow path adds itself to the queue then
calls pv_wait to wait for the lock to become free. This is implemented
by calling H_CONFER to donate cycles.
When hcall tracing is enabled, this H_CONFER call can lead to a spin
lock being taken in the tracing code, which will result in the lock to
be taken again, which will also go to the slow path because it queues
behind itself and so won't ever make progress.
An example trace of a deadlock:
__pv_queued_spin_lock_slowpath
trace_clock_global
ring_buffer_lock_reserve
trace_event_buffer_lock_reserve
trace_event_buffer_reserve
trace_event_raw_event_hcall_exit
__trace_hcall_exit
plpar_hcall_norets_trace
__pv_queued_spin_lock_slowpath
trace_clock_global
ring_buffer_lock_reserve
trace_event_buffer_lock_reserve
trace_event_buffer_reserve
trace_event_raw_event_rcu_dyntick
rcu_irq_exit
irq_exit
__do_irq
call_do_irq
do_IRQ
hardware_interrupt_common_virt
Fix this by introducing plpar_hcall_norets_notrace(), and using that to
make SPLPAR virtual processor dispatching hcalls by the paravirt
spinlock code.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210508101455.1578318-2-npiggin@gmail.com
Merge master back into next, this allows us to resolve some conflicts in
arch/powerpc/Kconfig, and also re-sort the symbols under config PPC so
that they are in alphabetical order again.
Merge more updates from Andrew Morton:
"The remainder of the main mm/ queue.
143 patches.
Subsystems affected by this patch series (all mm): pagecache, hugetlb,
userfaultfd, vmscan, compaction, migration, cma, ksm, vmstat, mmap,
kconfig, util, memory-hotplug, zswap, zsmalloc, highmem, cleanups, and
kfence"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (143 commits)
kfence: use power-efficient work queue to run delayed work
kfence: maximize allocation wait timeout duration
kfence: await for allocation using wait_event
kfence: zero guard page after out-of-bounds access
mm/process_vm_access.c: remove duplicate include
mm/mempool: minor coding style tweaks
mm/highmem.c: fix coding style issue
btrfs: use memzero_page() instead of open coded kmap pattern
iov_iter: lift memzero_page() to highmem.h
mm/zsmalloc: use BUG_ON instead of if condition followed by BUG.
mm/zswap.c: switch from strlcpy to strscpy
arm64/Kconfig: introduce ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE
x86/Kconfig: introduce ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE
mm,memory_hotplug: add kernel boot option to enable memmap_on_memory
acpi,memhotplug: enable MHP_MEMMAP_ON_MEMORY when supported
mm,memory_hotplug: allocate memmap from the added memory range
mm,memory_hotplug: factor out adjusting present pages into adjust_present_page_count()
mm,memory_hotplug: relax fully spanned sections check
drivers/base/memory: introduce memory_block_{online,offline}
mm/memory_hotplug: remove broken locking of zone PCP structures during hot remove
...
SYS_SUPPORTS_HUGETLBFS config has duplicate definitions on platforms
that subscribe it. Instead, just make it a generic option which can be
selected on applicable platforms.
Also rename it as ARCH_SUPPORTS_HUGETLBFS instead. This reduces code
duplication and makes it cleaner.
Link: https://lkml.kernel.org/r/1617259448-22529-3-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> [riscv]
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull swiotlb updates from Konrad Rzeszutek Wilk:
"Christoph Hellwig has taken a cleaver and trimmed off the not-needed
code and nicely folded duplicate code in the generic framework.
This lays the groundwork for more work to add extra DMA-backend-ish in
the future. Along with that some bug-fixes to make this a nice working
package"
* 'stable/for-linus-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: don't override user specified size in swiotlb_adjust_size
swiotlb: Fix the type of index
swiotlb: Make SWIOTLB_NO_FORCE perform no allocation
ARM: Qualify enabling of swiotlb_init()
swiotlb: remove swiotlb_nr_tbl
swiotlb: dynamically allocate io_tlb_default_mem
swiotlb: move global variables into a new io_tlb_mem structure
xen-swiotlb: remove the unused size argument from xen_swiotlb_fixup
xen-swiotlb: split xen_swiotlb_init
swiotlb: lift the double initialization protection from xen-swiotlb
xen-swiotlb: remove xen_io_tlb_start and xen_io_tlb_nslabs
xen-swiotlb: remove xen_set_nslabs
xen-swiotlb: use io_tlb_end in xen_swiotlb_dma_supported
xen-swiotlb: use is_swiotlb_buffer in is_xen_swiotlb_buffer
swiotlb: split swiotlb_tbl_sync_single
swiotlb: move orig addr and size validation into swiotlb_bounce
swiotlb: remove the alloc_size parameter to swiotlb_tbl_unmap_single
powerpc/svm: stop using io_tlb_start
Trace memory is cleared and the corresponding dcache lines
are flushed after allocation. However, this should not be
done using the PFN. This adds the missing conversion to
virtual address.
Fixes: 2ac02e5ece ("powerpc/mm: Remove dcache flush from memory remove.")
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210501160254.1179831-1-sandipan@linux.ibm.com
This code was only used by the vfio-nvlink2 code, which itself had no
proper use. Drop this huge chunk of code build into every powernv
or generic build.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210326061311.1497642-3-hch@lst.de
- Enable KFENCE for 32-bit.
- Implement EBPF for 32-bit.
- Convert 32-bit to do interrupt entry/exit in C.
- Convert 64-bit BookE to do interrupt entry/exit in C.
- Changes to our signal handling code to use user_access_begin/end() more extensively.
- Add support for time namespaces (CONFIG_TIME_NS)
- A series of fixes that allow us to reenable STRICT_KERNEL_RWX.
- Other smaller features, fixes & cleanups.
Thanks to: Alexey Kardashevskiy, Andreas Schwab, Andrew Donnellan, Aneesh Kumar K.V,
Athira Rajeev, Bhaskar Chowdhury, Bixuan Cui, Cédric Le Goater, Chen Huang, Chris
Packham, Christophe Leroy, Christopher M. Riedl, Colin Ian King, Dan Carpenter, Daniel
Axtens, Daniel Henrique Barboza, David Gibson, Davidlohr Bueso, Denis Efremov,
dingsenjie, Dmitry Safonov, Dominic DeMarco, Fabiano Rosas, Ganesh Goudar, Geert
Uytterhoeven, Geetika Moolchandani, Greg Kurz, Guenter Roeck, Haren Myneni, He Ying,
Jiapeng Chong, Jordan Niethe, Laurent Dufour, Lee Jones, Leonardo Bras, Li Huafei,
Madhavan Srinivasan, Mahesh Salgaonkar, Masahiro Yamada, Nathan Chancellor, Nathan
Lynch, Nicholas Piggin, Oliver O'Halloran, Paul Menzel, Pu Lehui, Randy Dunlap, Ravi
Bangoria, Rosen Penev, Russell Currey, Santosh Sivaraj, Sebastian Andrzej Siewior,
Segher Boessenkool, Shivaprasad G Bhat, Srikar Dronamraju, Stephen Rothwell, Thadeu Lima
de Souza Cascardo, Thomas Gleixner, Tony Ambardar, Tyrel Datwyler, Vaibhav Jain,
Vincenzo Frascino, Xiongwei Song, Yang Li, Yu Kuai, Zhang Yunkai.
-----BEGIN PGP SIGNATURE-----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=dfKL
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Enable KFENCE for 32-bit.
- Implement EBPF for 32-bit.
- Convert 32-bit to do interrupt entry/exit in C.
- Convert 64-bit BookE to do interrupt entry/exit in C.
- Changes to our signal handling code to use user_access_begin/end()
more extensively.
- Add support for time namespaces (CONFIG_TIME_NS)
- A series of fixes that allow us to reenable STRICT_KERNEL_RWX.
- Other smaller features, fixes & cleanups.
Thanks to Alexey Kardashevskiy, Andreas Schwab, Andrew Donnellan, Aneesh
Kumar K.V, Athira Rajeev, Bhaskar Chowdhury, Bixuan Cui, Cédric Le
Goater, Chen Huang, Chris Packham, Christophe Leroy, Christopher M.
Riedl, Colin Ian King, Dan Carpenter, Daniel Axtens, Daniel Henrique
Barboza, David Gibson, Davidlohr Bueso, Denis Efremov, dingsenjie,
Dmitry Safonov, Dominic DeMarco, Fabiano Rosas, Ganesh Goudar, Geert
Uytterhoeven, Geetika Moolchandani, Greg Kurz, Guenter Roeck, Haren
Myneni, He Ying, Jiapeng Chong, Jordan Niethe, Laurent Dufour, Lee
Jones, Leonardo Bras, Li Huafei, Madhavan Srinivasan, Mahesh Salgaonkar,
Masahiro Yamada, Nathan Chancellor, Nathan Lynch, Nicholas Piggin,
Oliver O'Halloran, Paul Menzel, Pu Lehui, Randy Dunlap, Ravi Bangoria,
Rosen Penev, Russell Currey, Santosh Sivaraj, Sebastian Andrzej Siewior,
Segher Boessenkool, Shivaprasad G Bhat, Srikar Dronamraju, Stephen
Rothwell, Thadeu Lima de Souza Cascardo, Thomas Gleixner, Tony Ambardar,
Tyrel Datwyler, Vaibhav Jain, Vincenzo Frascino, Xiongwei Song, Yang Li,
Yu Kuai, and Zhang Yunkai.
* tag 'powerpc-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (302 commits)
powerpc/signal32: Fix erroneous SIGSEGV on RT signal return
powerpc: Avoid clang uninitialized warning in __get_user_size_allowed
powerpc/papr_scm: Mark nvdimm as unarmed if needed during probe
powerpc/kvm: Fix build error when PPC_MEM_KEYS/PPC_PSERIES=n
powerpc/kasan: Fix shadow start address with modules
powerpc/kernel/iommu: Use largepool as a last resort when !largealloc
powerpc/kernel/iommu: Align size for IOMMU_PAGE_SIZE() to save TCEs
powerpc/44x: fix spelling mistake in Kconfig "varients" -> "variants"
powerpc/iommu: Annotate nested lock for lockdep
powerpc/iommu: Do not immediately panic when failed IOMMU table allocation
powerpc/iommu: Allocate it_map by vmalloc
selftests/powerpc: remove unneeded semicolon
powerpc/64s: remove unneeded semicolon
powerpc/eeh: remove unneeded semicolon
powerpc/selftests: Add selftest to test concurrent perf/ptrace events
powerpc/selftests/perf-hwbreak: Add testcases for 2nd DAWR
powerpc/selftests/perf-hwbreak: Coalesce event creation code
powerpc/selftests/ptrace-hwbreak: Add testcases for 2nd DAWR
powerpc/configs: Add IBMVNIC to some 64-bit configs
selftests/powerpc: Add uaccess flush test
...
Pull coredump updates from Al Viro:
"Just a couple of patches this cycle: use of seek + write instead of
expanding truncate and minor header cleanup"
* 'work.coredump' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
coredump.h: move CONFIG_COREDUMP-only stuff inside the ifdef
coredump: don't bother with do_truncate()
Pull vfs inode type handling updates from Al Viro:
"We should never change the type bits of ->i_mode or the method tables
(->i_op and ->i_fop) of a live inode.
Unfortunately, not all filesystems took care to prevent that"
* 'work.inode-type-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
spufs: fix bogosity in S_ISGID handling
9p: missing chunk of "fs/9p: Don't update file type when updating file attributes"
openpromfs: don't do unlock_new_inode() until the new inode is set up
hostfs_mknod(): don't bother with init_special_inode()
cifs: have cifs_fattr_to_inode() refuse to change type on live inode
cifs: have ->mkdir() handle race with another client sanely
do_cifs_create(): don't set ->i_mode of something we had not created
gfs2: be careful with inode refresh
ocfs2_inode_lock_update(): make sure we don't change the type bits of i_mode
orangefs_inode_is_stale(): i_mode type bits do *not* form a bitmap...
vboxsf: don't allow to change the inode type
afs: Fix updating of i_mode due to 3rd party change
ceph: don't allow type or device number to change on non-I_NEW inodes
ceph: fix up error handling with snapdirs
new helper: inode_wrong_type()
In case an nvdimm is found to be unarmed during probe then set its
NDD_UNARMED flag before nvdimm_create(). This would enforce a
read-only access to the ndimm region. Presently even if an nvdimm is
unarmed its not marked as read-only on ppc64 guests.
The patch updates papr_scm_nvdimm_init() to force query of nvdimm
health via __drc_pmem_query_health() and if nvdimm is found to be
unarmed then set the nvdimm flag ND_UNARMED for nvdimm_create().
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210329113103.476760-1-vaibhav@linux.ibm.com
Most platforms allocate IOMMU table structures (specifically it_map)
at the boot time and when this fails - it is a valid reason for panic().
However the powernv platform allocates it_map after a device is returned
to the host OS after being passed through and this happens long after
the host OS booted. It is quite possible to trigger the it_map allocation
panic() and kill the host even though it is not necessary - the host OS
can still use the DMA bypass mode (requires a tiny fraction of it_map's
memory) and even if that fails, the host OS is runnnable as it was without
the device for which allocating it_map causes the panic.
Instead of immediately crashing in a powernv/ioda2 system, this prints
an error and continues. All other platforms still call panic().
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Leonardo Bras <leobras.c@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210216033307.69863-3-aik@ozlabs.ru
Eliminate the following coccicheck warning:
./arch/powerpc/platforms/powernv/setup.c:160:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1612236877-104974-1-git-send-email-yang.lee@linux.alibaba.com
On a kernel config with ALTIVEC=y and PPC_FPU not set/enabled,
there are build errors:
drivers/cpufreq/pmac32-cpufreq.c:262:2: error: implicit declaration of function 'enable_kernel_fp' [-Werror,-Wimplicit-function-declaration]
enable_kernel_fp();
../arch/powerpc/lib/sstep.c: In function 'do_vec_load':
../arch/powerpc/lib/sstep.c:637:3: error: implicit declaration of function 'put_vr' [-Werror=implicit-function-declaration]
637 | put_vr(rn, &u.v);
| ^~~~~~
../arch/powerpc/lib/sstep.c: In function 'do_vec_store':
../arch/powerpc/lib/sstep.c:660:3: error: implicit declaration of function 'get_vr'; did you mean 'get_oc'? [-Werror=implicit-function-declaration]
660 | get_vr(rn, &u.v);
| ^~~~~~
In theory ALTIVEC is independent of PPC_FPU but in practice nobody
is going to build such a machine, so make ALTIVEC require PPC_FPU
by selecting it.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210421210647.20836-1-rdunlap@infradead.org
As of today, if the DDW is big enough to fit (1 << MAX_PHYSMEM_BITS)
it's possible to use direct DMA mapping even with pmem region.
But, if that happens, the window size (len) is set to (MAX_PHYSMEM_BITS
- page_shift) instead of MAX_PHYSMEM_BITS, causing a pagesize times
smaller DDW to be created, being insufficient for correct usage.
Fix this so the correct window size is used in this case.
Fixes: bf6e2d562b ("powerpc/dma: Fallback to dma_ops when persistent memory present")
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210420045404.438735-1-leobras.c@gmail.com
RCU complains about us calling printk() from an offline CPU:
=============================
WARNING: suspicious RCU usage
5.12.0-rc7-02874-g7cf90e481cb8 #1 Not tainted
-----------------------------
kernel/locking/lockdep.c:3568 RCU-list traversed in non-reader section!!
other info that might help us debug this:
RCU used illegally from offline CPU!
rcu_scheduler_active = 2, debug_locks = 1
no locks held by swapper/0/0.
stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc7-02874-g7cf90e481cb8 #1
Call Trace:
dump_stack+0xec/0x144 (unreliable)
lockdep_rcu_suspicious+0x124/0x144
__lock_acquire+0x1098/0x28b0
lock_acquire+0x128/0x600
_raw_spin_lock_irqsave+0x6c/0xc0
down_trylock+0x2c/0x70
__down_trylock_console_sem+0x60/0x140
vprintk_emit+0x1a8/0x4b0
vprintk_func+0xcc/0x200
printk+0x40/0x54
pseries_cpu_offline_self+0xc0/0x120
arch_cpu_idle_dead+0x54/0x70
do_idle+0x174/0x4a0
cpu_startup_entry+0x38/0x40
rest_init+0x268/0x388
start_kernel+0x748/0x790
start_here_common+0x1c/0x614
Which happens because by the time we get to rtas_stop_self() we are
already offline. In addition the message can be spammy, and is not that
helpful for users, so remove it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210418135413.1204031-1-mpe@ellerman.id.au
Currently, neither the vio_bus or vio_driver structures provide support
for a shutdown() routine.
Add support for shutdown() by allowing drivers to provide a
implementation via function pointer in their vio_driver struct and
provide a proper implementation in the driver template for the vio_bus
that calls a vio drivers shutdown() if defined.
In the case that no shutdown() is defined by a vio driver and a kexec is
in progress we implement a big hammer that calls remove() to ensure no
further DMA for the devices is possible.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210402001325.939668-1-tyreld@linux.ibm.com
The RTAS set-indicator call, when attempting to UNISOLATE a DRC that is
already UNISOLATED or CONFIGURED, returns RTAS_OK and does nothing else
for both QEMU and phyp. This gives us an opportunity to use this
behavior to signal the hypervisor layer when an error during device
removal happens, allowing it to do a proper error handling, while not
breaking QEMU/phyp implementations that don't have this support.
This patch introduces this idea by unisolating all CPU DRCs that failed
to be removed by dlpar_cpu_remove_by_index(), when handling the
PSERIES_HP_ELOG_ID_DRC_INDEX event. This is being done for this event
only because its the only CPU removal event QEMU uses, and there's no
need at this moment to add this mechanism for phyp only code.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210416210216.380291-3-danielhb413@gmail.com
Next patch will execute a set-indicator call in hotplug-cpu.c.
Create a dlpar_unisolate_drc() helper to avoid spreading more
rtas_set_indicator() calls outside of dlpar.c.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210416210216.380291-2-danielhb413@gmail.com
The pci_bus->bridge reference may no longer be valid after
pci_bus_remove() resulting in passing a bad value to device_unregister()
for the associated bridge device.
Store the host_bridge reference in a separate variable prior to
pci_bus_remove().
Fixes: 7340056567 ("powerpc/pci: Reorder pci bus/bridge unregistration during PHB removal")
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210211182435.47968-1-tyreld@linux.ibm.com
When I changed the rc variable to be long rather than int64_t I
neglected to update the printk(), leading to a build break:
arch/powerpc/platforms/pseries/papr_scm.c: In function 'papr_scm_pmem_flush':
arch/powerpc/platforms/pseries/papr_scm.c:144:26: warning: format
'%lld' expects argument of type 'long long int', but argument 3 has
type 'long int' [-Wformat=]
Fixes: 75b7c05ebf ("powerpc/papr_scm: Implement support for H_SCM_FLUSH hcall")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210416111209.765444-2-mpe@ellerman.id.au
Fix sparse warnings:
arch/powerpc/platforms/pseries/rtas-fadump.c:250:6: warning:
symbol 'rtas_fadump_set_regval' was not declared. Should it be static?
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408062012.85973-1-pulehui@huawei.com
The sparse tool complains as follows:
arch/powerpc/platforms/powernv/opal-core.c:74:16: warning:
symbol 'mpipl_kobj' was not declared.
This symbol is not used outside of opal-core.c, so marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210409063855.57347-1-cuibixuan@huawei.com
The sparse tool complains as follows:
arch/powerpc/platforms/pseries/pmem.c:142:27: warning:
symbol 'drc_pmem_match' was not declared. Should it be static?
This symbol is not used outside of pmem.c, so this
commit marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210409090114.59396-1-cuibixuan@huawei.com
The sparse tool complains as follows:
arch/powerpc/platforms/pseries/hvCall_inst.c:29:1: warning:
symbol '__pcpu_scope_hcall_stats' was not declared. Should it be static?
This symbol is not used outside of hvCall_inst.c, so this
commit marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210409090109.59347-1-cuibixuan@huawei.com
According to LoPAR, ibm,query-pe-dma-window output named "IO Page Sizes"
will let the OS know all possible pagesizes that can be used for creating a
new DDW.
Currently Linux will only try using 3 of the 8 available options:
4K, 64K and 16M. According to LoPAR, Hypervisor may also offer 32M, 64M,
128M, 256M and 16G.
Enabling bigger pages would be interesting for direct mapping systems
with a lot of RAM, while using less TCE entries.
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210408201915.174217-1-leobras.c@gmail.com
Many architectures duplicate similar shell scripts.
This commit converts powerpc to use scripts/syscalltbl.sh. This also
unifies syscall_table_32.h and syscall_table_c32.h.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210301153019.362742-1-masahiroy@kernel.org
Add support for ND_REGION_ASYNC capability if the device tree
indicates 'ibm,hcall-flush-required' property in the NVDIMM node.
Flush is done by issuing H_SCM_FLUSH hcall to the hypervisor.
If the flush request failed, the hypervisor is expected to
to reflect the problem in the subsequent nvdimm H_SCM_HEALTH call.
This patch prevents mmap of namespaces with MAP_SYNC flag if the
nvdimm requires an explicit flush[1].
References:
[1] https://github.com/avocado-framework-tests/avocado-misc-tests/blob/master/memory/ndctl.py.data/map_sync.c
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Use unsigned long / long instead of uint64_t/int64_t]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/161703936121.36.7260632399582101498.stgit@e1fbed493c87
Eliminate the following coccicheck warning:
./arch/powerpc/platforms/pseries/lpar.c:1633:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1617672785-81372-1-git-send-email-yang.lee@linux.alibaba.com
Let the memory removed from the linear mapping to be used for the trace
buffers be mmaped. This is a useful way of providing cache-inhibited
memory for the alignment_handler selftest.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: make memtrace_mmap() static as noticed by lkp@intel.com]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210225032108.1458352-1-jniethe5@gmail.com
The flags argument to plpar_pte_protect() (aka. H_PROTECT), includes
the key in bits 9-13, but currently we always set those bits to zero.
In the past that hasn't been a problem because we always used key 0
for the kernel, and updateboltedpp() is only used for kernel mappings.
However since commit d94b827e89 ("powerpc/book3s64/kuap: Use Key 3
for kernel mapping with hash translation") we are now inadvertently
changing the key (to zero) when we call plpar_pte_protect().
That hasn't broken anything because updateboltedpp() is only used for
STRICT_KERNEL_RWX, which is currently disabled on 64s due to other
bugs.
But we want to fix that, so first we need to pass the key correctly to
plpar_pte_protect(). We can't pass our newpp value directly in, we
have to convert it into the form expected by the hcall.
The hcall we're using here is H_PROTECT, which is specified in section
14.5.4.1.6 of LoPAPR v1.1.
It takes a `flags` parameter, and the description for flags says:
* flags: AVPN, pp0, pp1, pp2, key0-key4, n, and for the CMO
option: CMO Option flags as defined in Table 189‚
If you then go to the start of the parent section, 14.5.4.1, on page
405, it says:
Register Linkage (For hcall() tokens 0x04 - 0x18)
* On Call
* R3 function call token
* R4 flags (see Table 178‚ “Page Frame Table Access flags field
definition‚” on page 401)
Then you have to go to section 14.5.3, and on page 394 there is a list
of hcalls and their tokens (table 176), and there you can see that
H_PROTECT == 0x18.
Finally you can look at table 178, on page 401, where it specifies the
layout of the bits for the key:
Bit Function
-----------------
50-54 | key0-key4
Those are big-endian bit numbers, converting to normal bit numbers you
get bits 9-13, or 0x3e00.
In the kernel we have:
#define HPTE_R_KEY_HI ASM_CONST(0x3000000000000000)
#define HPTE_R_KEY_LO ASM_CONST(0x0000000000000e00)
So the LO bits of newpp are already in the right place, and the HI
bits need to be shifted down by 48.
Fixes: d94b827e89 ("powerpc/book3s64/kuap: Use Key 3 for kernel mapping with hash translation")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210331003845.216246-2-mpe@ellerman.id.au
The vio bus is a fake bus, which we use on pseries LPARs (guests) to
discover devices provided by the hypervisor. There's no need or sense
in creating the vio bus on bare metal systems.
Which is why commit 4336b93378 ("powerpc/pseries: Make vio and
ibmebus initcalls pseries specific") made the initialisation of the
vio bus only happen in LPARs.
However as a result of that commit we now see errors at boot on bare
metal systems:
Driver 'hvc_console' was unable to register with bus_type 'vio' because the bus was not initialized.
Driver 'tpm_ibmvtpm' was unable to register with bus_type 'vio' because the bus was not initialized.
This happens because those drivers are built-in, and are calling
vio_register_driver(). It in turn calls driver_register() with a
reference to vio_bus_type, but we haven't registered vio_bus_type with
the driver core.
Fix it by also guarding vio_register_driver() with a check to see if
we are on pseries.
Fixes: 4336b93378 ("powerpc/pseries: Make vio and ibmebus initcalls pseries specific")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Link: https://lore.kernel.org/r/20210316010938.525657-1-mpe@ellerman.id.au
One of the reasons that dlpar_cpu_offline can fail is when attempting to
offline the last online CPU of the kernel. This can be observed in a
pseries QEMU guest that has hotplugged CPUs. If the user offlines all
other CPUs of the guest, and a hotplugged CPU is now the last online
CPU, trying to reclaim it will fail.
The current error message in this situation returns rc with -EBUSY and a
generic explanation, e.g.:
pseries-hotplug-cpu: Failed to offline CPU PowerPC,POWER9, rc: -16
EBUSY can be caused by other conditions, such as cpu_hotplug_disable
being true. Throwing a more specific error message for this case,
instead of just "Failed to offline CPU", makes it clearer that the error
is in fact a known error situation instead of other generic/unknown
cause.
This patch adds a 'last online' check in dlpar_cpu_offline() to catch
the 'last online CPU' offline error, eturning a more informative error
message:
pseries-hotplug-cpu: Unable to remove last online CPU PowerPC,POWER9
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210323205056.52768-2-danielhb413@gmail.com
With below two commits:
commit c91435d95c ("powerpc/book3s64/hash/kuep: Enable KUEP on hash")
commit b2ff33a10c ("powerpc/book3s64/hash/kuap: Enable kuap on hash")
the kernel now supports kuap/kuep with hash translation. Hence select the
Kconfig even when radix is disabled.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210318034829.72255-1-aneesh.kumar@linux.ibm.com
This is helpful to read the security flavor from inside the LPAR.
In /sys/kernel/debug/powerpc/security_features it can be seen if
mitigations are on or off but not the level set through the ASMI menu.
Furthermore, reporting it through /proc/powerpc/lparcfg allows an easy
processing by the lparstat command [1].
Export it like this in /proc/powerpc/lparcfg:
$ grep security_flavor /proc/powerpc/lparcfg
security_flavor=1
Value follows what is documented on the IBM support page [2]:
0 Speculative execution fully enabled
1 Speculative execution controls to mitigate user-to-kernel attacks
2 Speculative execution controls to mitigate user-to-kernel and
user-to-user side-channel attacks
[1] https://groups.google.com/g/powerpc-utils-devel/c/NaKXvdyl_UI/m/wa2stpIDAQAJ
[2] https://www.ibm.com/support/pages/node/715841
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210305125554.5165-1-ldufour@linux.ibm.com
H_PROTECT expects the flag value to include flags:
AVPN, pp0, pp1, pp2, key0-key4, Noexec, CMO Option flags
This patch updates hpte_updatepp() to fetch the storage key value from
the linux page table and use the same in H_PROTECT hcall.
native_hpte_updatepp() is not updated because the kernel doesn't clear
the existing storage key value there. The kernel also doesn't use
hpte_updatepp() callback for updating storage keys.
This fixes the below kernel crash observed with KUAP enabled.
BUG: Unable to handle kernel data access on write at 0xc009fffffc440000
Faulting instruction address: 0xc0000000000b7030
Key fault AMR: 0xfcffffffffffffff IAMR: 0xc0000077bc498100
Found HPTE: v = 0x40070adbb6fffc05 r = 0x1ffffffffff1194
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
...
CFAR: c000000000010100 DAR: c009fffffc440000 DSISR: 02200000 IRQMASK: 0
...
NIP memset+0x68/0x104
LR pcpu_alloc+0x54c/0xb50
Call Trace:
pcpu_alloc+0x55c/0xb50 (unreliable)
blk_stat_alloc_callback+0x94/0x150
blk_mq_init_allocated_queue+0x64/0x560
blk_mq_init_queue+0x54/0xb0
scsi_mq_alloc_queue+0x30/0xa0
scsi_alloc_sdev+0x1cc/0x300
scsi_probe_and_add_lun+0xb50/0x1020
__scsi_scan_target+0x17c/0x790
scsi_scan_channel+0x90/0xe0
scsi_scan_host_selected+0x148/0x1f0
do_scan_async+0x2c/0x2a0
async_run_entry_fn+0x78/0x220
process_one_work+0x264/0x540
worker_thread+0xa8/0x600
kthread+0x190/0x1a0
ret_from_kernel_thread+0x5c/0x6c
With KUAP enabled the kernel uses storage key 3 for all its
translations. But as shown by the debug print, in this specific case we
have the hash page table entry created with key value 0.
Found HPTE: v = 0x40070adbb6fffc05 r = 0x1ffffffffff1194
and DSISR indicates a key fault.
This can happen due to parallel fault on the same EA by different CPUs:
CPU 0 CPU 1
fault on X
H_PAGE_BUSY set
fault on X
finish fault handling and
clear H_PAGE_BUSY
check for H_PAGE_BUSY
continue with fault handling.
This implies CPU1 will end up calling hpte_updatepp for address X and
the kernel updated the hash pte entry with key 0
Fixes: d94b827e89 ("powerpc/book3s64/kuap: Use Key 3 for kernel mapping with hash translation")
Reported-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Debugged-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210326070755.304625-1-aneesh.kumar@linux.ibm.com
Fixes the following W=1 kernel build warning(s):
drivers/tty/hvc/hvc_vio.c:385:13: warning: no previous prototype for ‘hvc_vio_init_early’
385 | void __init hvc_vio_init_early(void)
| ^~~~~~~~~~~~~~~~~~
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210303124603.3150175-1-lee.jones@linaro.org
Commit 407d418f2f ("powerpc/chrp: Move PHB discovery") moved the
sole call to hydra_init() to the source file where it is defined, so it
can be made static.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210223095345.2139416-1-geert@linux-m68k.org
The pseries join/suspend sequence in its current form was written with
the assumption that it was the only user of H_PROD and that it needn't
handle spurious successful returns from H_JOIN. That's wrong;
powerpc's paravirt spinlock code uses H_PROD, and CPUs entering
do_join() can be woken prematurely from H_JOIN with a status of
H_SUCCESS as a result. This causes all CPUs to exit the sequence
early, preventing suspend from occurring at all.
Add a 'done' boolean flag to the pseries_suspend_info struct, and have
the waking thread set it before waking the other threads. Threads
which receive H_SUCCESS from H_JOIN retry if the 'done' flag is still
unset.
Fixes: 9327dc0aee ("powerpc/pseries/mobility: use stop_machine for join/suspend")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210315080045.460331-3-nathanl@linux.ibm.com
The atomic_t counter is the only shared state for the join/suspend
sequence so far, but that will change. Contain it in a
struct (pseries_suspend_info), and document its intended use. No
functional change.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210315080045.460331-2-nathanl@linux.ibm.com
Use the local variable that is passed to swiotlb_init_with_tbl for
freeing the memory in the failure case to isolate the code a little
better from swiotlb internals.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
clearing everything *except* S_ISGID (including the S_IFDIR, among
other things) is wrong. Just use init_inode_owner() and be done
with that...
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
have dump_skip() just remember how much needs to be skipped,
leave actual seeks/writing zeroes to the next dump_emit()
or the end of coredump output, whichever comes first.
And instead of playing with do_truncate() in the end, just
write one NUL at the end of the last gap (if any).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The driver core ignores the return value of struct bus_type::remove()
because there is only little that can be done. To simplify the quest to
make this function return void, let struct vio_driver::remove() return
void, too. All users already unconditionally return 0, this commit makes
it obvious that returning an error code is a bad idea.
Note there are two nominally different implementations for a vio bus:
one in arch/sparc/kernel/vio.c and the other in
arch/powerpc/platforms/pseries/vio.c. This patch only adapts the powerpc
one.
Before this patch for a device that was bound to a driver without a
remove callback vio_cmo_bus_remove(viodev) wasn't called. As the device
core still considers the device unbound after vio_bus_remove() returns
calling this unconditionally is the consistent behaviour which is
implemented here.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Acked-by: Lijun Pan <ljp@linux.ibm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[mpe: Drop unneeded hvcs_remove() forward declaration, squash in
change from sfr to drop ibmvnic_remove() forward declaration]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210225221834.160083-1-uwe@kleine-koenig.org
Depending on the number of online CPUs in the original kernel, it is
likely for CPU #0 to be offline in a kdump kernel. The associated IRQs
in the affinity mappings provided by irq_create_affinity_masks() are
thus not started by irq_startup(), as per-design with managed IRQs.
This can be a problem with multi-queue block devices driven by blk-mq :
such a non-started IRQ is very likely paired with the single queue
enforced by blk-mq during kdump (see blk_mq_alloc_tag_set()). This
causes the device to remain silent and likely hangs the guest at
some point.
This is a regression caused by commit 9ea69a55b3 ("powerpc/pseries:
Pass MSI affinity to irq_create_mapping()"). Note that this only happens
with the XIVE interrupt controller because XICS has a workaround to bypass
affinity, which is activated during kdump with the "noirqdistrib" kernel
parameter.
The issue comes from a combination of factors:
- discrepancy between the number of queues detected by the multi-queue
block driver, that was used to create the MSI vectors, and the single
queue mode enforced later on by blk-mq because of kdump (i.e. keeping
all queues fixes the issue)
- CPU#0 offline (i.e. kdump always succeed with CPU#0)
Given that I couldn't reproduce on x86, which seems to always have CPU#0
online even during kdump, I'm not sure where this should be fixed. Hence
going for another approach : fine-grained affinity is for performance
and we don't really care about that during kdump. Simply revert to the
previous working behavior of ignoring affinity masks in this case only.
Fixes: 9ea69a55b3 ("powerpc/pseries: Pass MSI affinity to irq_create_mapping()")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210215094506.1196119-1-groug@kaod.org
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYCegywAKCRCRxhvAZXjc
ouJ6AQDlf+7jCQlQdeKKoN9QDFfMzG1ooemat36EpRRTONaGuAD8D9A4sUsG4+5f
4IU5Lj9oY4DEmF8HenbWK2ZHsesL2Qg=
=yPaw
-----END PGP SIGNATURE-----
Merge tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull idmapped mounts from Christian Brauner:
"This introduces idmapped mounts which has been in the making for some
time. Simply put, different mounts can expose the same file or
directory with different ownership. This initial implementation comes
with ports for fat, ext4 and with Christoph's port for xfs with more
filesystems being actively worked on by independent people and
maintainers.
Idmapping mounts handle a wide range of long standing use-cases. Here
are just a few:
- Idmapped mounts make it possible to easily share files between
multiple users or multiple machines especially in complex
scenarios. For example, idmapped mounts will be used in the
implementation of portable home directories in
systemd-homed.service(8) where they allow users to move their home
directory to an external storage device and use it on multiple
computers where they are assigned different uids and gids. This
effectively makes it possible to assign random uids and gids at
login time.
- It is possible to share files from the host with unprivileged
containers without having to change ownership permanently through
chown(2).
- It is possible to idmap a container's rootfs and without having to
mangle every file. For example, Chromebooks use it to share the
user's Download folder with their unprivileged containers in their
Linux subsystem.
- It is possible to share files between containers with
non-overlapping idmappings.
- Filesystem that lack a proper concept of ownership such as fat can
use idmapped mounts to implement discretionary access (DAC)
permission checking.
- They allow users to efficiently changing ownership on a per-mount
basis without having to (recursively) chown(2) all files. In
contrast to chown (2) changing ownership of large sets of files is
instantenous with idmapped mounts. This is especially useful when
ownership of a whole root filesystem of a virtual machine or
container is changed. With idmapped mounts a single syscall
mount_setattr syscall will be sufficient to change the ownership of
all files.
- Idmapped mounts always take the current ownership into account as
idmappings specify what a given uid or gid is supposed to be mapped
to. This contrasts with the chown(2) syscall which cannot by itself
take the current ownership of the files it changes into account. It
simply changes the ownership to the specified uid and gid. This is
especially problematic when recursively chown(2)ing a large set of
files which is commong with the aforementioned portable home
directory and container and vm scenario.
- Idmapped mounts allow to change ownership locally, restricting it
to specific mounts, and temporarily as the ownership changes only
apply as long as the mount exists.
Several userspace projects have either already put up patches and
pull-requests for this feature or will do so should you decide to pull
this:
- systemd: In a wide variety of scenarios but especially right away
in their implementation of portable home directories.
https://systemd.io/HOME_DIRECTORY/
- container runtimes: containerd, runC, LXD:To share data between
host and unprivileged containers, unprivileged and privileged
containers, etc. The pull request for idmapped mounts support in
containerd, the default Kubernetes runtime is already up for quite
a while now: https://github.com/containerd/containerd/pull/4734
- The virtio-fs developers and several users have expressed interest
in using this feature with virtual machines once virtio-fs is
ported.
- ChromeOS: Sharing host-directories with unprivileged containers.
I've tightly synced with all those projects and all of those listed
here have also expressed their need/desire for this feature on the
mailing list. For more info on how people use this there's a bunch of
talks about this too. Here's just two recent ones:
https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdfhttps://fosdem.org/2021/schedule/event/containers_idmap/
This comes with an extensive xfstests suite covering both ext4 and
xfs:
https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts
It covers truncation, creation, opening, xattrs, vfscaps, setid
execution, setgid inheritance and more both with idmapped and
non-idmapped mounts. It already helped to discover an unrelated xfs
setgid inheritance bug which has since been fixed in mainline. It will
be sent for inclusion with the xfstests project should you decide to
merge this.
In order to support per-mount idmappings vfsmounts are marked with
user namespaces. The idmapping of the user namespace will be used to
map the ids of vfs objects when they are accessed through that mount.
By default all vfsmounts are marked with the initial user namespace.
The initial user namespace is used to indicate that a mount is not
idmapped. All operations behave as before and this is verified in the
testsuite.
Based on prior discussions we want to attach the whole user namespace
and not just a dedicated idmapping struct. This allows us to reuse all
the helpers that already exist for dealing with idmappings instead of
introducing a whole new range of helpers. In addition, if we decide in
the future that we are confident enough to enable unprivileged users
to setup idmapped mounts the permission checking can take into account
whether the caller is privileged in the user namespace the mount is
currently marked with.
The user namespace the mount will be marked with can be specified by
passing a file descriptor refering to the user namespace as an
argument to the new mount_setattr() syscall together with the new
MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern
of extensibility.
The following conditions must be met in order to create an idmapped
mount:
- The caller must currently have the CAP_SYS_ADMIN capability in the
user namespace the underlying filesystem has been mounted in.
- The underlying filesystem must support idmapped mounts.
- The mount must not already be idmapped. This also implies that the
idmapping of a mount cannot be altered once it has been idmapped.
- The mount must be a detached/anonymous mount, i.e. it must have
been created by calling open_tree() with the OPEN_TREE_CLONE flag
and it must not already have been visible in the filesystem.
The last two points guarantee easier semantics for userspace and the
kernel and make the implementation significantly simpler.
By default vfsmounts are marked with the initial user namespace and no
behavioral or performance changes are observed.
The manpage with a detailed description can be found here:
1d7b902e28
In order to support idmapped mounts, filesystems need to be changed
and mark themselves with the FS_ALLOW_IDMAP flag in fs_flags. The
patches to convert individual filesystem are not very large or
complicated overall as can be seen from the included fat, ext4, and
xfs ports. Patches for other filesystems are actively worked on and
will be sent out separately. The xfstestsuite can be used to verify
that port has been done correctly.
The mount_setattr() syscall is motivated independent of the idmapped
mounts patches and it's been around since July 2019. One of the most
valuable features of the new mount api is the ability to perform
mounts based on file descriptors only.
Together with the lookup restrictions available in the openat2()
RESOLVE_* flag namespace which we added in v5.6 this is the first time
we are close to hardened and race-free (e.g. symlinks) mounting and
path resolution.
While userspace has started porting to the new mount api to mount
proper filesystems and create new bind-mounts it is currently not
possible to change mount options of an already existing bind mount in
the new mount api since the mount_setattr() syscall is missing.
With the addition of the mount_setattr() syscall we remove this last
restriction and userspace can now fully port to the new mount api,
covering every use-case the old mount api could. We also add the
crucial ability to recursively change mount options for a whole mount
tree, both removing and adding mount options at the same time. This
syscall has been requested multiple times by various people and
projects.
There is a simple tool available at
https://github.com/brauner/mount-idmapped
that allows to create idmapped mounts so people can play with this
patch series. I'll add support for the regular mount binary should you
decide to pull this in the following weeks:
Here's an example to a simple idmapped mount of another user's home
directory:
u1001@f2-vm:/$ sudo ./mount --idmap both:1000:1001:1 /home/ubuntu/ /mnt
u1001@f2-vm:/$ ls -al /home/ubuntu/
total 28
drwxr-xr-x 2 ubuntu ubuntu 4096 Oct 28 22:07 .
drwxr-xr-x 4 root root 4096 Oct 28 04:00 ..
-rw------- 1 ubuntu ubuntu 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile
-rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ ls -al /mnt/
total 28
drwxr-xr-x 2 u1001 u1001 4096 Oct 28 22:07 .
drwxr-xr-x 29 root root 4096 Oct 28 22:01 ..
-rw------- 1 u1001 u1001 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 u1001 u1001 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 u1001 u1001 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 u1001 u1001 807 Feb 25 2020 .profile
-rw-r--r-- 1 u1001 u1001 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 u1001 u1001 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ touch /mnt/my-file
u1001@f2-vm:/$ setfacl -m u:1001:rwx /mnt/my-file
u1001@f2-vm:/$ sudo setcap -n 1001 cap_net_raw+ep /mnt/my-file
u1001@f2-vm:/$ ls -al /mnt/my-file
-rw-rwxr--+ 1 u1001 u1001 0 Oct 28 22:14 /mnt/my-file
u1001@f2-vm:/$ ls -al /home/ubuntu/my-file
-rw-rwxr--+ 1 ubuntu ubuntu 0 Oct 28 22:14 /home/ubuntu/my-file
u1001@f2-vm:/$ getfacl /mnt/my-file
getfacl: Removing leading '/' from absolute path names
# file: mnt/my-file
# owner: u1001
# group: u1001
user::rw-
user:u1001:rwx
group::rw-
mask::rwx
other::r--
u1001@f2-vm:/$ getfacl /home/ubuntu/my-file
getfacl: Removing leading '/' from absolute path names
# file: home/ubuntu/my-file
# owner: ubuntu
# group: ubuntu
user::rw-
user:ubuntu:rwx
group::rw-
mask::rwx
other::r--"
* tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: (41 commits)
xfs: remove the possibly unused mp variable in xfs_file_compat_ioctl
xfs: support idmapped mounts
ext4: support idmapped mounts
fat: handle idmapped mounts
tests: add mount_setattr() selftests
fs: introduce MOUNT_ATTR_IDMAP
fs: add mount_setattr()
fs: add attr_flags_to_mnt_flags helper
fs: split out functions to hold writers
namespace: only take read lock in do_reconfigure_mnt()
mount: make {lock,unlock}_mount_hash() static
namespace: take lock_mount_hash() directly when changing flags
nfs: do not export idmapped mounts
overlayfs: do not mount on top of idmapped mounts
ecryptfs: do not mount on top of idmapped mounts
ima: handle idmapped mounts
apparmor: handle idmapped mounts
fs: make helpers idmap mount aware
exec: handle idmapped mounts
would_dump: handle idmapped mounts
...
Summary of modules changes for the 5.12 merge window:
- Retire EXPORT_UNUSED_SYMBOL() and EXPORT_SYMBOL_GPL_FUTURE(). These export
types were introduced between 2006 - 2008. All the of the unused symbols have
been long removed and gpl future symbols were converted to gpl quite a long
time ago, and I don't believe these export types have been used ever since.
So, I think it should be safe to retire those export types now. (Christoph Hellwig)
- Refactor and clean up some aged code cruft in the module loader (Christoph Hellwig)
- Build {,module_}kallsyms_on_each_symbol only when livepatching is enabled, as
it is the only caller (Christoph Hellwig)
- Unexport find_module() and module_mutex and fix the last module
callers to not rely on these anymore. Make module_mutex internal to
the module loader. (Christoph Hellwig)
- Harden ELF checks on module load and validate ELF structures before checking
the module signature (Frank van der Linden)
- Fix undefined symbol warning for clang (Fangrui Song)
- Fix smatch warning (Dan Carpenter)
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEVrp26glSWYuDNrCUwEV+OM47wXIFAmA0/KMQHGpleXVAa2Vy
bmVsLm9yZwAKCRDARX44zjvBcu0uD/4nmRp18EKAtdUZivsZHat0aEWGlkmrVueY
5huYw6iwM8b/wIAl3xwLki1Iv0/l0a83WXZhLG4ekl0/Nj8kgllA+jtBrZWpoLMH
CZusN5dS9YwwyD2vu3ak83ARcehcDEPeA9thvc3uRFGis6Hi4bt1rkzGdrzsgqR4
tybfN4qaQx4ZAKFxA8bnS58l7QTFwUzTxJfM6WWzl1Q+mLZDr/WP+loJ/f1/oFFg
ufN31KrqqFpdQY5UKq5P4H8FVq/eXE1Mwl8vo3HsnAj598fznyPUmA3D/j+N4GuR
sTGBVZ9CSehUj7uZRs+Qgg6Bd+y3o44N29BrdZWA6K3ieTeQQpA+VgPUNrDBjGhP
J/9Y4ms4PnuNEWWRaa73m9qsVqAsjh9+T2xp9PYn9uWLCM8BvQFtWcY7tw4/nB0/
INmyiP/tIRpwWkkBl47u1TPR09FzBBGDZjBiSn3lm3VX+zCYtHoma5jWyejG11cf
ybDrTsci9ANyHNP2zFQsUOQJkph78PIal0i3k4ODqGJvaC0iEIH3Xjv+0dmE14rq
kGRrG/HN6HhMZPjashudVUktyTZ63+PJpfFlQbcUzdvjQQIkzW0vrCHMWx9vD1xl
Na7vZLl4Nb03WSJp6saY6j2YSRKL0poGETzGqrsUAHEhpEOPHduaiCVlAr/EmeMk
p6SrWv8+UQ==
=T29Q
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
- Retire EXPORT_UNUSED_SYMBOL() and EXPORT_SYMBOL_GPL_FUTURE(). These
export types were introduced between 2006 - 2008. All the of the
unused symbols have been long removed and gpl future symbols were
converted to gpl quite a long time ago, and I don't believe these
export types have been used ever since. So, I think it should be safe
to retire those export types now (Christoph Hellwig)
- Refactor and clean up some aged code cruft in the module loader
(Christoph Hellwig)
- Build {,module_}kallsyms_on_each_symbol only when livepatching is
enabled, as it is the only caller (Christoph Hellwig)
- Unexport find_module() and module_mutex and fix the last module
callers to not rely on these anymore. Make module_mutex internal to
the module loader (Christoph Hellwig)
- Harden ELF checks on module load and validate ELF structures before
checking the module signature (Frank van der Linden)
- Fix undefined symbol warning for clang (Fangrui Song)
- Fix smatch warning (Dan Carpenter)
* tag 'modules-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: potential uninitialized return in module_kallsyms_on_each_symbol()
module: remove EXPORT_UNUSED_SYMBOL*
module: remove EXPORT_SYMBOL_GPL_FUTURE
module: move struct symsearch to module.c
module: pass struct find_symbol_args to find_symbol
module: merge each_symbol_section into find_symbol
module: remove each_symbol_in_section
module: mark module_mutex static
kallsyms: only build {,module_}kallsyms_on_each_symbol when required
kallsyms: refactor {,module_}kallsyms_on_each_symbol
module: use RCU to synchronize find_module
module: unexport find_module and module_mutex
drm: remove drm_fb_helper_modinit
powerpc/powernv: remove get_cxl_module
module: harden ELF info handling
module: Ignore _GLOBAL_OFFSET_TABLE_ when warning for undefined symbols
A large series adding wrappers for our interrupt handlers, so that irq/nmi/user
tracking can be isolated in the wrappers rather than spread in each handler.
Conversion of the 32-bit syscall handling into C.
A series from Nick to streamline our TLB flushing when using the Radix MMU.
Switch to using queued spinlocks by default for 64-bit server CPUs.
A rework of our PCI probing so that it happens later in boot, when more generic
infrastructure is available.
Two small fixes to allow 32-bit little-endian processes to run on 64-bit
kernels.
Other smaller features, fixes & cleanups.
Thanks to:
Alexey Kardashevskiy, Ananth N Mavinakayanahalli, Aneesh Kumar K.V, Athira
Rajeev, Bhaskar Chowdhury, Cédric Le Goater, Chengyang Fan, Christophe Leroy,
Christopher M. Riedl, Fabiano Rosas, Florian Fainelli, Frederic Barrat, Ganesh
Goudar, Hari Bathini, Jiapeng Chong, Joseph J Allen, Kajol Jain, Markus
Elfring, Michal Suchanek, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver
O'Halloran, Pingfan Liu, Po-Hsu Lin, Qian Cai, Ram Pai, Randy Dunlap, Sandipan
Das, Stephen Rothwell, Tyrel Datwyler, Will Springer, Yury Norov, Zheng
Yongjun.
-----BEGIN PGP SIGNATURE-----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=dB2S
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- A large series adding wrappers for our interrupt handlers, so that
irq/nmi/user tracking can be isolated in the wrappers rather than
spread in each handler.
- Conversion of the 32-bit syscall handling into C.
- A series from Nick to streamline our TLB flushing when using the
Radix MMU.
- Switch to using queued spinlocks by default for 64-bit server CPUs.
- A rework of our PCI probing so that it happens later in boot, when
more generic infrastructure is available.
- Two small fixes to allow 32-bit little-endian processes to run on
64-bit kernels.
- Other smaller features, fixes & cleanups.
Thanks to: Alexey Kardashevskiy, Ananth N Mavinakayanahalli, Aneesh
Kumar K.V, Athira Rajeev, Bhaskar Chowdhury, Cédric Le Goater, Chengyang
Fan, Christophe Leroy, Christopher M. Riedl, Fabiano Rosas, Florian
Fainelli, Frederic Barrat, Ganesh Goudar, Hari Bathini, Jiapeng Chong,
Joseph J Allen, Kajol Jain, Markus Elfring, Michal Suchanek, Nathan
Lynch, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Pingfan Liu,
Po-Hsu Lin, Qian Cai, Ram Pai, Randy Dunlap, Sandipan Das, Stephen
Rothwell, Tyrel Datwyler, Will Springer, Yury Norov, and Zheng Yongjun.
* tag 'powerpc-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (188 commits)
powerpc/perf: Adds support for programming of Thresholding in P10
powerpc/pci: Remove unimplemented prototypes
powerpc/uaccess: Merge raw_copy_to_user_allowed() into raw_copy_to_user()
powerpc/uaccess: Merge __put_user_size_allowed() into __put_user_size()
powerpc/uaccess: get rid of small constant size cases in raw_copy_{to,from}_user()
powerpc/64: Fix stack trace not displaying final frame
powerpc/time: Remove get_tbl()
powerpc/time: Avoid using get_tbl()
spi: mpc52xx: Avoid using get_tbl()
powerpc/syscall: Avoid storing 'current' in another pointer
powerpc/32: Handle bookE debugging in C in syscall entry/exit
powerpc/syscall: Do not check unsupported scv vector on PPC32
powerpc/32: Remove the counter in global_dbcr0
powerpc/32: Remove verification of MSR_PR on syscall in the ASM entry
powerpc/syscall: implement system call entry/exit logic in C for PPC32
powerpc/32: Always save non volatile GPRs at syscall entry
powerpc/syscall: Change condition to check MSR_RI
powerpc/syscall: Save r3 in regs->orig_r3
powerpc/syscall: Use is_compat_task()
powerpc/syscall: Make interrupt.c buildable on PPC32
...
- Sync dtc to upstream version v1.6.0-51-g183df9e9c2b9 and build
host fdtoverlay
- Add kbuild support to build DT overlays (%.dtbo)
- Drop NULLifying match table in of_match_device(). In preparation for
this, there are several driver cleanups to use
(of_)?device_get_match_data().
- Drop pointless wrappers from DT struct device API
- Convert USB binding schemas to use graph schema and remove old plain
text graph binding doc
- Convert spi-nor and v3d GPU bindings to DT schema
- Tree wide schema fixes for if/then schemas, array size constraints,
and undocumented compatible strings in examples
- Handle 'no-map' correctly for already reserved memblock regions
-----BEGIN PGP SIGNATURE-----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=9V4A
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Sync dtc to upstream version v1.6.0-51-g183df9e9c2b9 and build host
fdtoverlay
- Add kbuild support to build DT overlays (%.dtbo)
- Drop NULLifying match table in of_match_device().
In preparation for this, there are several driver cleanups to use
(of_)?device_get_match_data().
- Drop pointless wrappers from DT struct device API
- Convert USB binding schemas to use graph schema and remove old plain
text graph binding doc
- Convert spi-nor and v3d GPU bindings to DT schema
- Tree wide schema fixes for if/then schemas, array size constraints,
and undocumented compatible strings in examples
- Handle 'no-map' correctly for already reserved memblock regions
* tag 'devicetree-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits)
driver core: platform: Drop of_device_node_put() wrapper
of: Remove of_dev_{get,put}()
dt-bindings: usb: Change descibe to describe in usbmisc-imx.txt
dt-bindings: can: rcar_canfd: Group tuples in pin control properties
dt-bindings: power: renesas,apmu: Group tuples in cpus properties
dt-bindings: mtd: spi-nor: Convert to DT schema format
dt-bindings: Use portable sort for version cmp
dt-bindings: ethernet-controller: fix fixed-link specification
dt-bindings: irqchip: Add node name to PRUSS INTC
dt-bindings: interconnect: Fix the expected number of cells
dt-bindings: Fix errors in 'if' schemas
dt-bindings: iommu: renesas,ipmmu-vmsa: Make 'power-domains' conditionally required
dt-bindings: Fix undocumented compatible strings in examples
kbuild: Add support to build overlays (%.dtbo)
scripts: dtc: Remove the unused fdtdump.c file
scripts: dtc: Build fdtoverlay tool
scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9
scripts: dtc: Fetch fdtoverlay.c from external DTC project
dt-bindings: thermal: sun8i: Fix misplaced schema keyword in compatible strings
dt-bindings: iio: dac: Fix AD5686 references
...
[ NOTE: unfortunately this tree had to be freshly rebased today,
it's a same-content tree of 82891be90f3c (-next published)
merged with v5.11.
The main reason for the rebase was an authorship misattribution
problem with a new commit, which we noticed in the last minute,
and which we didn't want to be merged upstream. The offending
commit was deep in the tree, and dependent commits had to be
rebased as well. ]
- Core scheduler updates:
- Add CONFIG_PREEMPT_DYNAMIC: this in its current form adds the
preempt=none/voluntary/full boot options (default: full),
to allow distros to build a PREEMPT kernel but fall back to
close to PREEMPT_VOLUNTARY (or PREEMPT_NONE) runtime scheduling
behavior via a boot time selection.
There's also the /debug/sched_debug switch to do this runtime.
This feature is implemented via runtime patching (a new variant of static calls).
The scope of the runtime patching can be best reviewed by looking
at the sched_dynamic_update() function in kernel/sched/core.c.
( Note that the dynamic none/voluntary mode isn't 100% identical,
for example preempt-RCU is available in all cases, plus the
preempt count is maintained in all models, which has runtime
overhead even with the code patching. )
The PREEMPT_VOLUNTARY/PREEMPT_NONE models, used by the vast majority
of distributions, are supposed to be unaffected.
- Fix ignored rescheduling after rcu_eqs_enter(). This is a bug that
was found via rcutorture triggering a hang. The bug is that
rcu_idle_enter() may wake up a NOCB kthread, but this happens after
the last generic need_resched() check. Some cpuidle drivers fix it
by chance but many others don't.
In true 2020 fashion the original bug fix has grown into a 5-patch
scheduler/RCU fix series plus another 16 RCU patches to address
the underlying issue of missed preemption events. These are the
initial fixes that should fix current incarnations of the bug.
- Clean up rbtree usage in the scheduler, by providing & using the following
consistent set of rbtree APIs:
partial-order; less() based:
- rb_add(): add a new entry to the rbtree
- rb_add_cached(): like rb_add(), but for a rb_root_cached
total-order; cmp() based:
- rb_find(): find an entry in an rbtree
- rb_find_add(): find an entry, and add if not found
- rb_find_first(): find the first (leftmost) matching entry
- rb_next_match(): continue from rb_find_first()
- rb_for_each(): iterate a sub-tree using the previous two
- Improve the SMP/NUMA load-balancer: scan for an idle sibling in a single pass.
This is a 4-commit series where each commit improves one aspect of the idle
sibling scan logic.
- Improve the cpufreq cooling driver by getting the effective CPU utilization
metrics from the scheduler
- Improve the fair scheduler's active load-balancing logic by reducing the number
of active LB attempts & lengthen the load-balancing interval. This improves
stress-ng mmapfork performance.
- Fix CFS's estimated utilization (util_est) calculation bug that can result in
too high utilization values
- Misc updates & fixes:
- Fix the HRTICK reprogramming & optimization feature
- Fix SCHED_SOFTIRQ raising race & warning in the CPU offlining code
- Reduce dl_add_task_root_domain() overhead
- Fix uprobes refcount bug
- Process pending softirqs in flush_smp_call_function_from_idle()
- Clean up task priority related defines, remove *USER_*PRIO and
USER_PRIO()
- Simplify the sched_init_numa() deduplication sort
- Documentation updates
- Fix EAS bug in update_misfit_status(), which degraded the quality
of energy-balancing
- Smaller cleanups
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=pyaG
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Core scheduler updates:
- Add CONFIG_PREEMPT_DYNAMIC: this in its current form adds the
preempt=none/voluntary/full boot options (default: full), to allow
distros to build a PREEMPT kernel but fall back to close to
PREEMPT_VOLUNTARY (or PREEMPT_NONE) runtime scheduling behavior via
a boot time selection.
There's also the /debug/sched_debug switch to do this runtime.
This feature is implemented via runtime patching (a new variant of
static calls).
The scope of the runtime patching can be best reviewed by looking
at the sched_dynamic_update() function in kernel/sched/core.c.
( Note that the dynamic none/voluntary mode isn't 100% identical,
for example preempt-RCU is available in all cases, plus the
preempt count is maintained in all models, which has runtime
overhead even with the code patching. )
The PREEMPT_VOLUNTARY/PREEMPT_NONE models, used by the vast
majority of distributions, are supposed to be unaffected.
- Fix ignored rescheduling after rcu_eqs_enter(). This is a bug that
was found via rcutorture triggering a hang. The bug is that
rcu_idle_enter() may wake up a NOCB kthread, but this happens after
the last generic need_resched() check. Some cpuidle drivers fix it
by chance but many others don't.
In true 2020 fashion the original bug fix has grown into a 5-patch
scheduler/RCU fix series plus another 16 RCU patches to address the
underlying issue of missed preemption events. These are the initial
fixes that should fix current incarnations of the bug.
- Clean up rbtree usage in the scheduler, by providing & using the
following consistent set of rbtree APIs:
partial-order; less() based:
- rb_add(): add a new entry to the rbtree
- rb_add_cached(): like rb_add(), but for a rb_root_cached
total-order; cmp() based:
- rb_find(): find an entry in an rbtree
- rb_find_add(): find an entry, and add if not found
- rb_find_first(): find the first (leftmost) matching entry
- rb_next_match(): continue from rb_find_first()
- rb_for_each(): iterate a sub-tree using the previous two
- Improve the SMP/NUMA load-balancer: scan for an idle sibling in a
single pass. This is a 4-commit series where each commit improves
one aspect of the idle sibling scan logic.
- Improve the cpufreq cooling driver by getting the effective CPU
utilization metrics from the scheduler
- Improve the fair scheduler's active load-balancing logic by
reducing the number of active LB attempts & lengthen the
load-balancing interval. This improves stress-ng mmapfork
performance.
- Fix CFS's estimated utilization (util_est) calculation bug that can
result in too high utilization values
Misc updates & fixes:
- Fix the HRTICK reprogramming & optimization feature
- Fix SCHED_SOFTIRQ raising race & warning in the CPU offlining code
- Reduce dl_add_task_root_domain() overhead
- Fix uprobes refcount bug
- Process pending softirqs in flush_smp_call_function_from_idle()
- Clean up task priority related defines, remove *USER_*PRIO and
USER_PRIO()
- Simplify the sched_init_numa() deduplication sort
- Documentation updates
- Fix EAS bug in update_misfit_status(), which degraded the quality
of energy-balancing
- Smaller cleanups"
* tag 'sched-core-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
sched,x86: Allow !PREEMPT_DYNAMIC
entry/kvm: Explicitly flush pending rcuog wakeup before last rescheduling point
entry: Explicitly flush pending rcuog wakeup before last rescheduling point
rcu/nocb: Trigger self-IPI on late deferred wake up before user resume
rcu/nocb: Perform deferred wake up before last idle's need_resched() check
rcu: Pull deferred rcuog wake up to rcu_eqs_enter() callers
sched/features: Distinguish between NORMAL and DEADLINE hrtick
sched/features: Fix hrtick reprogramming
sched/deadline: Reduce rq lock contention in dl_add_task_root_domain()
uprobes: (Re)add missing get_uprobe() in __find_uprobe()
smp: Process pending softirqs in flush_smp_call_function_from_idle()
sched: Harden PREEMPT_DYNAMIC
static_call: Allow module use without exposing static_call_key
sched: Add /debug/sched_preempt
preempt/dynamic: Support dynamic preempt with preempt= boot option
preempt/dynamic: Provide irqentry_exit_cond_resched() static call
preempt/dynamic: Provide preempt_schedule[_notrace]() static calls
preempt/dynamic: Provide cond_resched() and might_resched() static calls
preempt: Introduce CONFIG_PREEMPT_DYNAMIC
static_call: Provide DEFINE_STATIC_CALL_RET0()
...
The "oprofile" user-space tools don't use the kernel OPROFILE support any more,
and haven't in a long time. User-space has been converted to the perf
interfaces.
The dcookies stuff is only used by the oprofile code. Now that oprofile's
support is getting removed from the kernel, there is no need for dcookies as
well.
Remove kernel's old oprofile and dcookies support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=I2Ac
-----END PGP SIGNATURE-----
Merge tag 'oprofile-removal-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/linux
Pull oprofile and dcookies removal from Viresh Kumar:
"Remove oprofile and dcookies support
The 'oprofile' user-space tools don't use the kernel OPROFILE support
any more, and haven't in a long time. User-space has been converted to
the perf interfaces.
The dcookies stuff is only used by the oprofile code. Now that
oprofile's support is getting removed from the kernel, there is no
need for dcookies as well.
Remove kernel's old oprofile and dcookies support"
* tag 'oprofile-removal-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/linux:
fs: Remove dcookies support
drivers: Remove CONFIG_OPROFILE support
arch: xtensa: Remove CONFIG_OPROFILE support
arch: x86: Remove CONFIG_OPROFILE support
arch: sparc: Remove CONFIG_OPROFILE support
arch: sh: Remove CONFIG_OPROFILE support
arch: s390: Remove CONFIG_OPROFILE support
arch: powerpc: Remove oprofile
arch: powerpc: Stop building and using oprofile
arch: parisc: Remove CONFIG_OPROFILE support
arch: mips: Remove CONFIG_OPROFILE support
arch: microblaze: Remove CONFIG_OPROFILE support
arch: ia64: Remove rest of perfmon support
arch: ia64: Remove CONFIG_OPROFILE support
arch: hexagon: Don't select HAVE_OPROFILE
arch: arc: Remove CONFIG_OPROFILE support
arch: arm: Remove CONFIG_OPROFILE support
arch: alpha: Remove CONFIG_OPROFILE support
The only remaining use of MAX_USER_PRIO (and USER_PRIO) is the
SCALE_PRIO() definition in the PowerPC Cell architecture's Synergistic
Processor Unit (SPU) scheduler. TASK_USER_PRIO isn't used anymore.
Commit fe443ef2ac ("[POWERPC] spusched: Dynamic timeslicing for
SCHED_OTHER") copied SCALE_PRIO() from the task scheduler in v2.6.23.
Commit a4ec24b48d ("sched: tidy up SCHED_RR") removed it from the task
scheduler in v2.6.24.
Commit 3ee237dddc ("sched/prio: Add 3 macros of MAX_NICE, MIN_NICE and
NICE_WIDTH in prio.h") introduced NICE_WIDTH much later.
With:
MAX_USER_PRIO = USER_PRIO(MAX_PRIO)
= MAX_PRIO - MAX_RT_PRIO
MAX_PRIO = MAX_RT_PRIO + NICE_WIDTH
MAX_USER_PRIO = MAX_RT_PRIO + NICE_WIDTH - MAX_RT_PRIO
MAX_USER_PRIO = NICE_WIDTH
MAX_USER_PRIO can be replaced by NICE_WIDTH to be able to remove all the
{*_}USER_PRIO defines.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20210128131040.296856-3-dietmar.eggemann@arm.com
of_dev_get() and of_dev_put are just wrappers for get_device()/put_device()
on a platform_device. There's also already platform_device_{get,put}()
wrappers for this purpose. Let's update the few users and remove
of_dev_{get,put}().
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Cc: Gilles Muller <Gilles.Muller@inria.fr>
Cc: Nicolas Palix <nicolas.palix@imag.fr>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: netdev@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-usb@vger.kernel.org
Cc: cocci@systeme.lip6.fr
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210211232745.1498137-2-robh@kernel.org
We added dcache flush on memory add/remove in commit
fb5924fddf ("powerpc/mm: Flush cache on memory hot(un)plug") to
handle crashes on GPU hotplug. Instead of adding dcache flush in
generic memory add/remove routine which is used even for regular
memory, we should handle these devices specific flush in the device
driver code.
memtrace did handle this in the driver and that was removed by commit
7fd6641de2 ("powerpc/powernv/memtrace: Let the arch hotunplug code
flush cache"). This patch reverts that commit.
The dcache flush in memory add was removed by commit
ea458effa8 ("powerpc: Don't flush caches when adding memory") which
I don't think is correct. The reason why we require dcache flush in
memtrace is to make sure we don't have a dirty cache when we remap a
pfn to cache inhibited. We should do that when the memtrace module
removes the memory and make the pfn available for HTM traces to map it
as cache inhibited.
The other device mentioned in commit fb5924fddf ("powerpc/mm: Flush
cache on memory hot(un)plug") is nvlink device with coherent memory.
The support for that was removed in commit
7eb3cf7619 ("powerpc/powernv: remove unused NPU DMA code") and
commit 25b2995a35 ("mm: remove MEMORY_DEVICE_PUBLIC support")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210203045812.234439-3-aneesh.kumar@linux.ibm.com
As reported by lkp:
arch/powerpc/platforms/83xx/km83xx.c:183:19: error: 'mpc83xx_setup_pci' undeclared here (not in a function)
183 | .discover_phbs = mpc83xx_setup_pci,
| ^~~~~~~~~~~~~~~~~
| mpc83xx_setup_arch
There is a stub defined for the CONFIG_PCI=n case, but now that
mpc83xx_setup_pci() is being assigned to discover_phbs the correct
empty value is NULL.
Fixes: 83f84041ff ("powerpc/83xx: Move PHB discovery")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210210130804.3190952-1-mpe@ellerman.id.au
As part of commit fbbefb3202 ("powerpc/pci: Move PHB discovery for
PCI_DN using platforms"), I switched some allocations from
memblock_alloc() to kmalloc(), otherwise memblock would warn that it
was being called after slab init.
However I missed that the code relied on the allocations being zeroed,
without which we could end up crashing:
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
BUG: Unable to handle kernel data access on read at 0x6b6b6b6b6b6b6af7
Faulting instruction address: 0xc0000000000dbc90
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA PowerNV
...
NIP pnv_ioda_get_pe_state+0xe0/0x1d0
LR pnv_ioda_get_pe_state+0xb4/0x1d0
Call Trace:
pnv_ioda_get_pe_state+0xb4/0x1d0 (unreliable)
pnv_pci_config_check_eeh.isra.9+0x78/0x270
pnv_pci_read_config+0xf8/0x160
pci_bus_read_config_dword+0xa4/0x120
pci_bus_generic_read_dev_vendor_id+0x54/0x270
pci_scan_single_device+0xb8/0x140
pci_scan_slot+0x80/0x1b0
pci_scan_child_bus_extend+0x94/0x490
pcibios_scan_phb+0x1f8/0x3c0
pcibios_init+0x8c/0x12c
do_one_initcall+0x94/0x510
kernel_init_freeable+0x35c/0x3fc
kernel_init+0x2c/0x168
ret_from_kernel_thread+0x5c/0x70
Switch them to kzalloc().
Fixes: fbbefb3202 ("powerpc/pci: Move PHB discovery for PCI_DN using platforms")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210211112749.3410771-1-mpe@ellerman.id.au
dlpar_configure_connector() has two problems in its handling of
ibm,configure-connector's return status:
1. When the status is -2 (busy, call again), we call
ibm,configure-connector again immediately without checking whether
to schedule, which can result in monopolizing the CPU.
2. Extended delay status (9900..9905) goes completely unhandled,
causing the configuration to unnecessarily terminate.
Fix both of these issues by using rtas_busy_delay().
Fixes: ab519a011c ("powerpc/pseries: Kernel DLPAR Infrastructure")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210107025900.410369-1-nathanl@linux.ibm.com
The AKEBONO config has various selects under it, including some with
user-selectable dependencies, which means those dependencies can be
disabled. This leads to warnings from Kconfig.
This can be seen with eg:
$ make allnoconfig
$ ./scripts/config --file build~/.config -k -e CONFIG_44x -k -e CONFIG_PPC_47x -e CONFIG_AKEBONO
$ make olddefconfig
WARNING: unmet direct dependencies detected for ATA
Depends on [n]: HAS_IOMEM [=y] && BLOCK [=n]
Selected by [y]:
- AKEBONO [=y] && PPC_47x [=y]
WARNING: unmet direct dependencies detected for NETDEVICES
Depends on [n]: NET [=n]
Selected by [y]:
- AKEBONO [=y] && PPC_47x [=y]
WARNING: unmet direct dependencies detected for ETHERNET
Depends on [n]: NETDEVICES [=y] && NET [=n]
Selected by [y]:
- AKEBONO [=y] && PPC_47x [=y]
WARNING: unmet direct dependencies detected for MMC_SDHCI
Depends on [n]: MMC [=n] && HAS_DMA [=y]
Selected by [y]:
- AKEBONO [=y] && PPC_47x [=y]
WARNING: unmet direct dependencies detected for MMC_SDHCI_PLTFM
Depends on [n]: MMC [=n] && MMC_SDHCI [=y]
Selected by [y]:
- AKEBONO [=y] && PPC_47x [=y]
The problem is that AKEBONO is using select to enable things that are
not true dependencies, but rather things you probably want enabled in
an AKEBONO kernel. That is what a defconfig is for.
So drop those selects and instead move those symbols into the
defconfig. This fixes all the kconfig warnings, and the result of make
44x/akebono_defconfig is the same before and after the patch.
Reported-by: Yury Norov <yury.norov@gmail.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210201012503.940145-1-mpe@ellerman.id.au
The pseries real-mode machine check handler can enable the MMU, and
return from the handler with the MMU still enabled.
This works, but real-mode handler wrapper exit handlers want to rely
on the MMU being in real-mode. So change the pseries handler to
restore the MSR after it has finished virtual mode tasks.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1612702361.lm7fqo56re.astroid@bobo.none
As explained by commit daf00ae71d ("powerpc/traps: restore
recoverability of machine_check interrupts"), die() can't be called from
within nmi_enter to nicely kill a process context that was interrupted.
nmi_exit must be called first.
This adds a function die_mce which takes care of this for machine check
handlers.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210130130852.2952424-24-npiggin@gmail.com
Similar to the previous patch this makes interrupt handler function
types more regular so they can be wrapped with the next patch.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210130130852.2952424-12-npiggin@gmail.com
Make powernv, pseries, powermac and maple use ppc_mc.discover_phbs.
These platforms need to be done together because they all depend on
pci_dn's being created from the DT. The pci_dn contains a pointer to
the relevant pci_controller so they need to be created after the
pci_controller structures are available, but before PCI devices are
scanned. Currently this ordering is provided by initcalls and the
sequence is:
1. PHBs are discovered (setup_arch) (early boot, pre-initcalls)
2. pci_dn are created from the unflattended DT (core initcall)
3. PHBs are scanned pcibios_init() (subsys initcall)
The new ppc_md.discover_phbs() function is also a core_initcall so we
can't guarantee ordering between the creation of pci_controllers and
the creation of pci_dn's which require a pci_controller. We could use
the postcore, or core_sync initcall levels, but it's cleaner to just
move the pci_dn setup into the per-PHB inits which occur inside of
.discover_phb() for these platforms. This brings the boot-time path in
line with the PHB hotplug path that is used for pseries DLPAR
operations too.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
[mpe: Squash powermac & maple in to avoid breakage those platforms,
convert memblock allocs to use kmalloc to avoid warnings]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201103043523.916109-2-oohall@gmail.com
The static inline get_cxl_module function is entirely unused since commit
8bf6b91a51 ("Revert "powerpc/powernv: Add support for the cxl kernel
api on the real phb"), so remove it.
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
The pnv_phb->initialized flag is an odd beast. It was added back in 2012 in
commit db1266c852 ("powerpc/powernv: Skip check on PE if necessary") to
allow devices to be enabled even if the device had not yet been assigned to
a PE. Allowing the device to be enabled before the PE is configured may
cause spurious EEH events since none of the IOMMU context has been setup.
I'm not entirely sure why this was ever necessary. My best guess is that it
was an workaround for a bug or some other undesireable behaviour from the
PCI core. Either way, it's unnecessary now since as of commit dc3d8f85bb
("powerpc/powernv/pci: Re-work bus PE configuration") we can guarantee that
the PE will be configured before the PCI core will allow drivers to bind to
the device.
It's also worth pointing out that the ->initialized flag is only set in
pnv_pci_ioda_create_dbgfs(). That function has its entire body wrapped
in #ifdef CONFIG_DEBUG_FS. As a result, for kernels built without debugfs
(i.e. petitboot) the other checks in pnv_pci_enable_device_hook() are
bypassed entirely.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200902013657.1753830-1-oohall@gmail.com
Adjust jump targets so that a bit of exception handling can be better
reused at the end of this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1a4bafee-562f-5eb4-d2bd-34704f8c5ab3@web.de
A null pointer would be passed to a call of the function “of_node_put”
immediately after a call of the function “of_find_compatible_node” failed
at one place.
Remove this superfluous function call.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9c060a41-438b-6fb8-d549-37c72fae4898@web.de
Omit an extra message for a memory allocation failure in this function.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/535cfec2-782f-61ec-f6fb-c50186ead2af@web.de
A null pointer would be passed to a call of the function “kfree”
immediately after a call of the function “kstrdup” failed at one place.
Remove this superfluous function call.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b46cc4ff-a14c-0c10-0c0c-95573a960178@web.de
The VAS device allocates a generic interrupt to handle page faults but
the IRQ name doesn't show under /proc. This is because it's on
stack. Allocate the name.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201212142707.2102141-1-clg@kaod.org
Only used locally. It fixes this W=1 compile error :
../arch/powerpc/platforms/pseries/eeh_pseries.c:697:5: error: no previous prototype for ‘pseries_send_allow_unfreeze’ [-Werror=missing-prototypes]
697 | int pseries_send_allow_unfreeze(struct pci_dn *pdn,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-24-clg@kaod.org
These are only used locally. It fixes these W=1 compile errors :
../arch/powerpc/platforms/pseries/setup.c:610:17: error: no previous prototype for ‘pseries_get_iov_fw_value’ [-Werror=missing-prototypes]
610 | resource_size_t pseries_get_iov_fw_value(struct pci_dev *dev, int resno,
| ^~~~~~~~~~~~~~~~~~~~~~~~
../arch/powerpc/platforms/pseries/setup.c:646:6: error: no previous prototype for ‘of_pci_set_vf_bar_size’ [-Werror=missing-prototypes]
646 | void of_pci_set_vf_bar_size(struct pci_dev *dev, const int *indexes)
| ^~~~~~~~~~~~~~~~~~~~~~
../arch/powerpc/platforms/pseries/setup.c:668:6: error: no previous prototype for ‘of_pci_parse_iov_addrs’ [-Werror=missing-prototypes]
668 | void of_pci_parse_iov_addrs(struct pci_dev *dev, const int *indexes)
| ^~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-22-clg@kaod.org
init_ras_hotplug_IRQ() is a local routine used by a machine init call
and it doesn't need to be external.
It fixes this W=1 compile error:
../arch/powerpc/platforms/pseries/ras.c:125:12: error: no previous prototype for ‘init_ras_hotplug_IRQ’ [-Werror=missing-prototypes]
125 | int __init init_ras_hotplug_IRQ(void)
| ^~~~~~~~~~~~~~~~~~~~
Fixes: c9dccf1d07 ("powerpc/pseries: Enable RAS hotplug events later")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-5-clg@kaod.org
pseries_pcibios_bus_add_device() is a local routine defining the
pcibios_bus_add_device() handler of the pseries machine in
eeh_pseries_init(). It doesn't need to be external.
It fixes this W=1 compile error:
../arch/powerpc/platforms/pseries/eeh_pseries.c:46:6: error: no previous prototype for ‘pseries_pcibios_bus_add_device’ [-Werror=missing-prototypes]
46 | void pseries_pcibios_bus_add_device(struct pci_dev *pdev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: dae7253f9f ("powerpc/pseries: Add pseries SR-IOV Machine dependent calls")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-4-clg@kaod.org
The last use of 'status' was removed in 2012. Remove the variable to
fix this W=1 compile error.
../arch/powerpc/platforms/pseries/ras.c: In function ‘ras_epow_interrupt’:
../arch/powerpc/platforms/pseries/ras.c:318:6: error: variable ‘status’ set but not used [-Werror=unused-but-set-variable]
318 | int status;
| ^~~~~~
Fixes: 55fc0c5617 ("powerpc/pseries: Parse and handle EPOW interrupts")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-3-clg@kaod.org
The "oprofile" user-space tools don't use the kernel OPROFILE support
any more, and haven't in a long time. User-space has been converted to
the perf interfaces.
This commits stops building oprofile for powerpc and removes any
reference to it from directories in arch/powerpc/ apart from
arch/powerpc/oprofile, which will be removed in the next commit (this is
broken into two commits as the size of the commit became very big, ~5k
lines).
Note that the member "oprofile_cpu_type" in "struct cpu_spec" isn't
removed as it was also used by other parts of the code.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Robert Richter <rric@kernel.org>
Acked-by: William Cohen <wcohen@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Extend some inode methods with an additional user namespace argument. A
filesystem that is aware of idmapped mounts will receive the user
namespace the mount has been marked with. This can be used for
additional permission checking and also to enable filesystems to
translate between uids and gids if they need to. We have implemented all
relevant helpers in earlier patches.
As requested we simply extend the exisiting inode method instead of
introducing new ones. This is a little more code churn but it's mostly
mechanical and doesnt't leave us with additional inode methods.
Link: https://lore.kernel.org/r/20210121131959.646623-25-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Cédric Le Goater