Commit Graph

672 Commits

Author SHA1 Message Date
Bjorn Helgaas d0b7b3a422 Merge branch 'pci/resource'
- When we coalesce host bridge windows, remove invalidated resources from
  the resource tree so future allocations work correctly (Ross Lagerwall)

* pci/resource:
  PCI: Release resource invalidated by coalescing
2023-06-26 12:59:57 -05:00
Maciej W. Rozycki a89c82249c PCI: Work around PCIe link training failures
Attempt to handle cases such as with a downstream port of the ASMedia
ASM2824 PCIe switch where link training never completes and the link
continues switching between speeds indefinitely with the data link layer
never reaching the active state.

It has been observed with a downstream port of the ASMedia ASM2824 Gen 3
switch wired to the upstream port of the Pericom PI7C9X2G304 Gen 2 switch,
using a Delock Riser Card PCI Express x1 > 2 x PCIe x1 device, P/N 41433,
wired to a SiFive HiFive Unmatched board.  In this setup the switches
should negotiate a link speed of 5.0GT/s, falling back to 2.5GT/s if
necessary.

Instead the link continues oscillating between the two speeds, at the rate
of 34-35 times per second, with link training reported repeatedly active
~84% of the time.  Limiting the target link speed to 2.5GT/s with the
upstream ASM2824 device makes the two switches communicate correctly.
Removing the speed restriction afterwards makes the two devices switch to
5.0GT/s then.

Make use of these observations and detect the inability to train the link
by checking for the Data Link Layer Link Active status bit being off while
the Link Bandwidth Management Status indicating that hardware has changed
the link speed or width in an attempt to correct unreliable link operation.

Restrict the speed to 2.5GT/s then with the Target Link Speed field,
request a retrain and wait 200ms for the data link to go up.  If this is
successful, lift the restriction, letting the devices negotiate a higher
speed.

Also check for a 2.5GT/s speed restriction the firmware may have already
arranged and lift it too with ports of devices known to continue working
afterwards (currently only ASM2824), that already report their data link
being up.

[bhelgaas: reorder and squash stubs from
https://lore.kernel.org/r/alpine.DEB.2.21.2306111619570.64925@angie.orcam.me.uk
to avoid adding stubs that do nothing]
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2203022037020.56670@angie.orcam.me.uk/
Link: https://source.denx.de/u-boot/u-boot/-/commit/a398a51ccc68
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2305310038540.59226@angie.orcam.me.uk
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-06-20 10:58:53 -05:00
Maciej W. Rozycki 42adbdc74c PCI: Initialize dev->link_active_reporting earlier
Determine whether Data Link Layer Link Active Reporting is available before
calling any fixups so that the cached value can be used there and later on.

[bhelgaas: move to set_pcie_port_type() where other PCIe init is done]
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2305310122210.59226@angie.orcam.me.uk
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2023-06-14 17:58:12 -05:00
Ross Lagerwall e54223275b PCI: Release resource invalidated by coalescing
When contiguous windows are coalesced by pci_register_host_bridge(), the
second resource is expanded to include the first, and the first is
invalidated and consequently not added to the bus. However, it remains in
the resource hierarchy.  For example, these windows:

  fec00000-fec7ffff : PCI Bus 0000:00
  fec80000-fecbffff : PCI Bus 0000:00

are coalesced into this, where the first resource remains in the tree with
start/end zeroed out:

  00000000-00000000 : PCI Bus 0000:00
  fec00000-fecbffff : PCI Bus 0000:00

In some cases (e.g. the Xen scratch region), this causes future calls to
allocate_resource() to choose an inappropriate location which the caller
cannot handle.

Fix by releasing the zeroed-out resource and removing it from the resource
hierarchy.

[bhelgaas: commit log]
Fixes: 7c3855c423 ("PCI: Coalesce host bridge contiguous apertures")
Link: https://lore.kernel.org/r/20230525153248.712779-1-ross.lagerwall@citrix.com
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org	# v5.16+
2023-06-09 15:06:16 -05:00
Linus Torvalds 7acc137211 cxl for v6.4
- Refactor the DOE infrastructure (Data Object Exchange PCI-config-cycle
   mailbox) to be a facility of the PCI core rather than the CXL core.
   This is foundational for upcoming support for PCI device-attestation and
   PCIe / CXL link encryption.
 
 - Add support for retrieving and injecting poison for CXL memory
   expanders. This enabling uses trace-events to convey CXL media error
   records to user tooling. It includes translation of device-local
   addresses (DPA) to system physical addresses (SPA) and their
   corresponding CXL region.
 
 - Fixes for decoder enumeration that missed v6.3-final
 
 - Miscellaneous fixups
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCZE2nNwAKCRDfioYZHlFs
 Z5c2AQCTWebok6CD+HN01xnIx+CBWAUQe0QIGR40dT2P6/WGEgEA8wMae0w/FDlc
 lQDvSoIyPvy1hGO7Ppb0K2AT6jrQAgU=
 =blcC
 -----END PGP SIGNATURE-----

Merge tag 'cxl-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl

Pull compute express link updates from Dan Williams:
 "DOE support is promoted from drivers/cxl/ to drivers/pci/ with Bjorn's
  blessing, and the CXL core continues to mature its media management
  capabilities with support for listing and injecting media errors. Some
  late fixes that missed v6.3-final are also included:

   - Refactor the DOE infrastructure (Data Object Exchange
     PCI-config-cycle mailbox) to be a facility of the PCI core rather
     than the CXL core.

     This is foundational for upcoming support for PCI
     device-attestation and PCIe / CXL link encryption.

   - Add support for retrieving and injecting poison for CXL memory
     expanders.

     This enabling uses trace-events to convey CXL media error records
     to user tooling. It includes translation of device-local addresses
     (DPA) to system physical addresses (SPA) and their corresponding
     CXL region.

   - Fixes for decoder enumeration that missed v6.3-final

   - Miscellaneous fixups"

* tag 'cxl-for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (38 commits)
  cxl/test: Add mock test for set_timestamp
  cxl/mbox: Update CMD_RC_TABLE
  tools/testing/cxl: Require CONFIG_DEBUG_FS
  tools/testing/cxl: Add a sysfs attr to test poison inject limits
  tools/testing/cxl: Use injected poison for get poison list
  tools/testing/cxl: Mock the Clear Poison mailbox command
  tools/testing/cxl: Mock the Inject Poison mailbox command
  cxl/mem: Add debugfs attributes for poison inject and clear
  cxl/memdev: Trace inject and clear poison as cxl_poison events
  cxl/memdev: Warn of poison inject or clear to a mapped region
  cxl/memdev: Add support for the Clear Poison mailbox command
  cxl/memdev: Add support for the Inject Poison mailbox command
  tools/testing/cxl: Mock support for Get Poison List
  cxl/trace: Add an HPA to cxl_poison trace events
  cxl/region: Provide region info to the cxl_poison trace event
  cxl/memdev: Add trigger_poison_list sysfs attribute
  cxl/trace: Add TRACE support for CXL media-error records
  cxl/mbox: Add GET_POISON_LIST mailbox command
  cxl/mbox: Initialize the poison state
  cxl/mbox: Restrict poison cmds to debugfs cxl_raw_allow_all
  ...
2023-04-30 11:51:51 -07:00
Linus Torvalds 34b62f186d pci-v6.4-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmRIKooUHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vxq7A/9G0sInrqvqH2I9/Set/FnmMfCtGDH
 YcEjHYYxL+pztSiXTavDV+ib9iaut83oYtcV9p1bUMhJoZdKNZhrNdIGzRFSemI4
 0/ShtklPzNEu6nPPL24CnEzgbrODBU56ZvzrIE/tShEoOjkKa1triBnOA/JMxYTL
 cUwqDQlDkdpYniCgxy05QfcFZ0mmSOkbl7runGfTMTiUKKC3xSRiaW5YN9KZe3i7
 G5YHu1VVCjeQdQSICHYwyFmkyiqosCoajQNp1IHBkWqSwilzyZMg0NWJobVSA7M/
 mXXnzLtFcC60oT58/9MaggQwDTaSGDE8mG+sWv05bB2u5TQVyZEZqZ4c2FzmZIZT
 WLZYLB6PFRW0zePEuMnVkSLS2npkX+aGaBv28bf88sjorpaYNG01uYijnLEceolQ
 yBPFRN3bsRuOyHvYY/tiZX/BP7z/DS++XXwA8zQWZnYsXSlncJdwCNquV0xIwUt+
 hij4/Yu7o9SgV1LbuwtkMFAn3C9Szc65Eer+IvRRdnMZYphjVHbA5F2msRFyiCeR
 HxECtMQ1jBnVrpQAcBX1Sz+Vu5MrwCqzc2n6tvTQHDvVNjXfkG3NaFhxYPc1IL9Z
 NJMeCKfK1qzw7TtbvWXCluTTIM9N/bNJXrJhQbjNY7V6IaBZY1QNYW0ZFfGgj6Gb
 UUPgndidRy4/hzw=
 =HPXl
 -----END PGP SIGNATURE-----

Merge tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
 "Resource management:

   - Add pci_dev_for_each_resource() and pci_bus_for_each_resource()
     iterators

  PCIe native device hotplug:

   - Fix AB-BA deadlock between reset_lock and device_lock

  Power management:

   - Wait longer for devices to become ready after resume (as we do for
     reset) to accommodate Intel Titan Ridge xHCI devices

   - Extend D3hot delay for NVIDIA HDA controllers to avoid
     unrecoverable devices after a bus reset

  Error handling:

   - Clear PCIe Device Status after EDR since generic error recovery now
     only clears it when AER is native

  ASPM:

   - Work around Chromebook firmware defect that clobbers Capability
     list (including ASPM L1 PM Substates Cap) when returning from
     D3cold to D0

  Freescale i.MX6 PCIe controller driver:

   - Install imprecise external abort handler only when DT indicates
     PCIe support

  Freescale Layerscape PCIe controller driver:

   - Add ls1028a endpoint mode support

  Qualcomm PCIe controller driver:

   - Add SM8550 DT binding and driver support

   - Add SDX55 DT binding and driver support

   - Use bulk APIs for clocks of IP 1.0.0, 2.3.2, 2.3.3

   - Use bulk APIs for reset of IP 2.1.0, 2.3.3, 2.4.0

   - Add DT "mhi" register region for supported SoCs

   - Expose link transition counts via debugfs to help debug low power
     issues

   - Support system suspend and resume; reduce interconnect bandwidth
     and turn off clock and PHY if there are no active devices

   - Enable async probe by default to reduce boot time

  Miscellaneous:

   - Sort controller Kconfig entries by vendor"

* tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (56 commits)
  PCI: xilinx: Drop obsolete dependency on COMPILE_TEST
  PCI: mobiveil: Sort Kconfig entries by vendor
  PCI: dwc: Sort Kconfig entries by vendor
  PCI: Sort controller Kconfig entries by vendor
  PCI: Use consistent controller Kconfig menu entry language
  PCI: xilinx-nwl: Add 'Xilinx' to Kconfig prompt
  PCI: hv: Add 'Microsoft' to Kconfig prompt
  PCI: meson: Add 'Amlogic' to Kconfig prompt
  PCI: Use of_property_present() for testing DT property presence
  PCI/PM: Extend D3hot delay for NVIDIA HDA controllers
  dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties
  PCI: qcom: Add SM8550 PCIe support
  dt-bindings: PCI: qcom: Add SM8550 compatible
  PCI: qcom: Add support for SDX55 SoC
  dt-bindings: PCI: qcom-ep: Fix the unit address used in example
  dt-bindings: PCI: qcom: Add SDX55 SoC
  dt-bindings: PCI: qcom: Update maintainers entry
  PCI: qcom: Enable async probe by default
  PCI: qcom: Add support for system suspend and resume
  PCI/PM: Drop pci_bridge_wait_for_secondary_bus() timeout parameter
  ...
2023-04-27 10:45:30 -07:00
Rob Herring 0d21e71a91 PCI: Restrict device disabled status check to DT
Commit 6fffbc7ae1 ("PCI: Honor firmware's device disabled status")
checked the firmware device status for both DT and ACPI devices. That
caused a regression in some ACPI systems. The exact reason isn't clear.
It's possibly a firmware bug. For now, at least, refactor the check to
be for DT based systems only.

Note that the original implementation leaked a refcount which is now
correctly handled.

[bhelgaas: Per ACPI r6.5, sec 6.3.7, for devices on an enumerable bus, _STA
must return with bit[0] ("device is present") set]

Link: https://lore.kernel.org/all/m2fs9lgndw.fsf@gmail.com/
Fixes: 6fffbc7ae1 ("PCI: Honor firmware's device disabled status")
Link: https://lore.kernel.org/r/20230419193513.708818-1-robh@kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217317
Reported-by: Donald Hunter <donald.hunter@gmail.com>
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Tested-by: Donald Hunter <donald.hunter@gmail.com>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Binbin Zhou <zhoubinbin@loongson.cn>
Cc: Liu Peibao <liupeibao@loongson.cn>
Cc: Huacai Chen <chenhuacai@loongson.cn>
2023-04-20 13:30:14 -05:00
Lukas Wunner ac04840350 PCI/DOE: Create mailboxes on device enumeration
Currently a DOE instance cannot be shared by multiple drivers because
each driver creates its own pci_doe_mb struct for a given DOE instance.
For the same reason a DOE instance cannot be shared between the PCI core
and a driver.

Moreover, finding out which protocols a DOE instance supports requires
creating a pci_doe_mb for it.  If a device has multiple DOE instances,
a driver looking for a specific protocol may need to create a pci_doe_mb
for each of the device's DOE instances and then destroy those which
do not support the desired protocol.  That's obviously an inefficient
way to do things.

Overcome these issues by creating mailboxes in the PCI core on device
enumeration.

Provide a pci_find_doe_mailbox() API call to allow drivers to get a
pci_doe_mb for a given (pci_dev, vendor, protocol) triple.  This API is
modeled after pci_find_capability() and can later be amended with a
pci_find_next_doe_mailbox() call to iterate over all mailboxes of a
given pci_dev which support a specific protocol.

On removal, destroy the mailboxes in pci_destroy_dev(), after the driver
is unbound.  This allows drivers to use DOE in their ->remove() hook.

On surprise removal, cancel ongoing DOE exchanges and prevent new ones
from being scheduled.  Thereby ensure that a hot-removed device doesn't
needlessly wait for a running exchange to time out.

Tested-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Ming Li <ming4.li@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/40a6f973f72ef283d79dd55e7e6fddc7481199af.1678543498.git.lukas@wunner.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-04-18 10:36:58 -07:00
Andy Shevchenko 02992064bd PCI: Make pci_bus_for_each_resource() index optional
Refactor pci_bus_for_each_resource() in the same way as
pci_dev_for_each_resource(). This allows the index to be hidden inside the
implementation so the caller can omit it when it's not used otherwise.

No functional changes intended.

Link: https://lore.kernel.org/r/20230330162434.35055-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-04-05 15:10:09 -05:00
Linus Torvalds 7c3dc440b1 cxl for v6.3
- CXL RAM region enumeration: instantiate 'struct cxl_region' objects
   for platform firmware created memory regions
 
 - CXL RAM region provisioning: complement the existing PMEM region
   creation support with RAM region support
 
 - "Soft Reservation" policy change: Online (memory hot-add)
   soft-reserved memory (EFI_MEMORY_SP) by default, but still allow for
   setting aside such memory for dedicated access via device-dax.
 
 - CXL Events and Interrupts: Takeover CXL event handling from
   platform-firmware (ACPI calls this CXL Memory Error Reporting) and
   export CXL Events via Linux Trace Events.
 
 - Convey CXL _OSC results to drivers: Similar to PCI, let the CXL
   subsystem interrogate the result of CXL _OSC negotiation.
 
 - Emulate CXL DVSEC Range Registers as "decoders": Allow for
   first-generation devices that pre-date the definition of the CXL HDM
   Decoder Capability to translate the CXL DVSEC Range Registers into
   'struct cxl_decoder' objects.
 
 - Set timestamp: Per spec, set the device timestamp in case of hotplug,
   or if platform-firwmare failed to set it.
 
 - General fixups: linux-next build issues, non-urgent fixes for
   pre-production hardware, unit test fixes, spelling and debug message
   improvements.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCY/WYcgAKCRDfioYZHlFs
 Z6m3APkBUtiEEm1o8ikdu5llUS1OTLBwqjJDwGMTyf8X/WDXhgD+J2mLsCgARS7X
 5IS0RAtefutrW5sQpUucPM7QiLuraAY=
 =kOXC
 -----END PGP SIGNATURE-----

Merge tag 'cxl-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl

Pull Compute Express Link (CXL) updates from Dan Williams:
 "To date Linux has been dependent on platform-firmware to map CXL RAM
  regions and handle events / errors from devices. With this update we
  can now parse / update the CXL memory layout, and report events /
  errors from devices. This is a precursor for the CXL subsystem to
  handle the end-to-end "RAS" flow for CXL memory. i.e. the flow that
  for DDR-attached-DRAM is handled by the EDAC driver where it maps
  system physical address events to a field-replaceable-unit (FRU /
  endpoint device). In general, CXL has the potential to standardize
  what has historically been a pile of memory-controller-specific error
  handling logic.

  Another change of note is the default policy for handling RAM-backed
  device-dax instances. Previously the default access mode was "device",
  mmap(2) a device special file to access memory. The new default is
  "kmem" where the address range is assigned to the core-mm via
  add_memory_driver_managed(). This saves typical users from wondering
  why their platform memory is not visible via free(1) and stuck behind
  a device-file. At the same time it allows expert users to deploy
  policy to, for example, get dedicated access to high performance
  memory, or hide low performance memory from general purpose kernel
  allocations. This affects not only CXL, but also systems with
  high-bandwidth-memory that platform-firmware tags with the
  EFI_MEMORY_SP (special purpose) designation.

  Summary:

   - CXL RAM region enumeration: instantiate 'struct cxl_region' objects
     for platform firmware created memory regions

   - CXL RAM region provisioning: complement the existing PMEM region
     creation support with RAM region support

   - "Soft Reservation" policy change: Online (memory hot-add)
     soft-reserved memory (EFI_MEMORY_SP) by default, but still allow
     for setting aside such memory for dedicated access via device-dax.

   - CXL Events and Interrupts: Takeover CXL event handling from
     platform-firmware (ACPI calls this CXL Memory Error Reporting) and
     export CXL Events via Linux Trace Events.

   - Convey CXL _OSC results to drivers: Similar to PCI, let the CXL
     subsystem interrogate the result of CXL _OSC negotiation.

   - Emulate CXL DVSEC Range Registers as "decoders": Allow for
     first-generation devices that pre-date the definition of the CXL
     HDM Decoder Capability to translate the CXL DVSEC Range Registers
     into 'struct cxl_decoder' objects.

   - Set timestamp: Per spec, set the device timestamp in case of
     hotplug, or if platform-firwmare failed to set it.

   - General fixups: linux-next build issues, non-urgent fixes for
     pre-production hardware, unit test fixes, spelling and debug
     message improvements"

* tag 'cxl-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (66 commits)
  dax/kmem: Fix leak of memory-hotplug resources
  cxl/mem: Add kdoc param for event log driver state
  cxl/trace: Add serial number to trace points
  cxl/trace: Add host output to trace points
  cxl/trace: Standardize device information output
  cxl/pci: Remove locked check for dvsec_range_allowed()
  cxl/hdm: Add emulation when HDM decoders are not committed
  cxl/hdm: Create emulated cxl_hdm for devices that do not have HDM decoders
  cxl/hdm: Emulate HDM decoder from DVSEC range registers
  cxl/pci: Refactor cxl_hdm_decode_init()
  cxl/port: Export cxl_dvsec_rr_decode() to cxl_port
  cxl/pci: Break out range register decoding from cxl_hdm_decode_init()
  cxl: add RAS status unmasking for CXL
  cxl: remove unnecessary calling of pci_enable_pcie_error_reporting()
  dax/hmem: build hmem device support as module if possible
  dax: cxl: add CXL_REGION dependency
  cxl: avoid returning uninitialized error code
  cxl/pmem: Fix nvdimm registration races
  cxl/mem: Fix UAPI command comment
  cxl/uapi: Tag commands from cxl_query_cmd()
  ...
2023-02-25 09:19:23 -08:00
Bjorn Helgaas ebdce9e3d0 Merge branch 'pci/resource'
- Realign space as required by bridge windows after dividing it up (Mika
  Westerberg)

- Account for space required by other devices on the bus before
  distributing it all to bridges (Mika Westerberg)

- Distribute spare resources to root bus devices as well as to other
  hotplug bridges (Mika Westerberg)

- Fix bug that dropped root bus resources that end at zero, e.g., a host
  bridge that leads only to bus 00 (Geert Uytterhoeven)

* pci/resource:
  PCI: Fix dropping valid root bus resources with .end = zero
  PCI: Distribute available resources for root buses, too
  PCI: Take other bus devices into account when distributing resources
  PCI: Align extra resources for hotplug bridges properly
2023-02-22 13:47:27 -06:00
Geert Uytterhoeven 9d8ba74a18 PCI: Fix dropping valid root bus resources with .end = zero
On r8a7791/koelsch:

  kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
  # cat /sys/kernel/debug/kmemleak
  unreferenced object 0xc3a34e00 (size 64):
    comm "swapper/0", pid 1, jiffies 4294937460 (age 199.080s)
    hex dump (first 32 bytes):
      b4 5d 81 f0 b4 5d 81 f0 c0 b0 a2 c3 00 00 00 00  .]...]..........
      00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    backtrace:
      [<fe3aa979>] __kmalloc+0xf0/0x140
      [<34bd6bc0>] resource_list_create_entry+0x18/0x38
      [<767046bc>] pci_add_resource_offset+0x20/0x68
      [<b3f3edf2>] devm_of_pci_get_host_bridge_resources.constprop.0+0xb0/0x390

When coalescing two resources for a contiguous aperture, the second
resource is enlarged to cover the full contiguous range, while the first
resource is marked invalid.  This invalidation is done by clearing the
flags, start, and end members.

When adding the initial resources to the bus later, invalid resources are
skipped.  Unfortunately, the check for an invalid resource considers only
the end member, causing false positives.

E.g. on r8a7791/koelsch, root bus resource 0 ("bus 00") is skipped, and no
longer registered with pci_bus_insert_busn_res() (causing the memory leak),
nor printed:

   pci-rcar-gen2 ee090000.pci: host bridge /soc/pci@ee090000 ranges:
   pci-rcar-gen2 ee090000.pci:      MEM 0x00ee080000..0x00ee08ffff -> 0x00ee080000
   pci-rcar-gen2 ee090000.pci: PCI: revision 11
   pci-rcar-gen2 ee090000.pci: PCI host bridge to bus 0000:00
  -pci_bus 0000:00: root bus resource [bus 00]
   pci_bus 0000:00: root bus resource [mem 0xee080000-0xee08ffff]

Fix this by only skipping resources where all of the flags, start, and end
members are zero.

Fixes: 7c3855c423 ("PCI: Coalesce host bridge contiguous apertures")
Link: https://lore.kernel.org/r/da0fcd5e86c74239be79c7cb03651c0fce31b515.1676036673.git.geert+renesas@glider.be
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
2023-02-13 16:40:45 -06:00
Rob Herring 6fffbc7ae1 PCI: Honor firmware's device disabled status
If a device has a firmware node (DT/ACPI), and the device is marked
disabled, that is currently ignored. Add a check for this condition and
bail out creating the pci_dev.

This assumes the config space for the device can still be accessed because
they already have by this point in order to identify the device.

Link: https://lore.kernel.org/r/20230210164351.2687475-1-robh@kernel.org
Tested-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Liu Peibao <liupeibao@loongson.cn>
Cc: Huacai Chen <chenhuacai@loongson.cn>
2023-02-13 15:29:56 -06:00
Ira Weiny 589c335737 PCI/CXL: Export native CXL error reporting control
CXL _OSC Error Reporting Control is used by the OS to determine if
Firmware has control of various CXL error reporting capabilities
including the event logs.

Expose the result of negotiating CXL Error Reporting Control in struct
pci_host_bridge for consumption by the CXL drivers.

Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: linux-pci@vger.kernel.org
Cc: linux-acpi@vger.kernel.org
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20221212070627.1372402-2-ira.weiny@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-01-05 13:31:27 -08:00
Linus Torvalds c7020e1b34 pci-v6.2-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmOYpTIUHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vxuZhAAhGjE8voLZeOYwxbvfL69hGTAZ+Me
 x2hqRWVhh/IGWXTTaoSLwSjMMokcmAKN5S/wv8qdCG5sB8EN8FyTBIZDy8PuRRdl
 8UlqlBMSL+d4oSRDCnYLxFNcynLRNnmx2dfcdw9tJ4zjTLN8Y4o8PHFogR6pJ3MT
 sDC8S0myTQKXr4wAGzTZycKsiGManviYtByp6dCcKD3Oy5Q2uZ9OKO2DP2yQpn+F
 c3IJSV9oDz3KR8JVJ5Q1iz9cdMXbGwjkM3JLlHpxhedwjN4ErLumPutKcebtzO5C
 aTqabN7Nnzc4yJusAIfojFCWH7fgaYUyJ3pxcFyJ4tu4m9Last+2I5UB/kV2sYAD
 jWiCYx3sA/mRopNXOnrBGae+Lgy+sQnt8or0grySr0bK+b+ArAGis4uT4A0uASGO
 RUQdIQwz7zhHeQrwAladHWxnx4BEDNCatgfn38p4fklIYKydCY5nfZURMDvHezSR
 G6Nu08hoE9ZXlmkWTFw+5F23wPWKcCpzZj0hf7OroIouXUp8vqSFSqatH5vGkbCl
 bDswck9GdRJ2hl5SvFOeelaXkM42du45TMLU2JmIn6dYYFNrO93JgdvKSU7E2CpG
 AmDIpg1Idxo8fEPPGH1I7RVU5+ilzmmPQQY7poQW+va4/dEd/QVp1+ZZTDnMC1qk
 qi3ck22VdvPU2VU=
 =KULr
 -----END PGP SIGNATURE-----

Merge tag 'pci-v6.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Squash portdrv_{core,pci}.c into portdrv.c to ease maintenance and
     make more things static.

   - Make portdrv bind to Switch Ports that have AER. Previously, if
     these Ports lacked MSI/MSI-X, portdrv failed to bind, which meant
     the Ports couldn't be suspended to low-power states. AER on these
     Ports doesn't use interrupts, and the AER driver doesn't need to
     claim them.

   - Assign PCI domain IDs using ida_alloc(), which makes host bridge
     add/remove work better.

  Resource management:

   - To work better with recent BIOSes that use EfiMemoryMappedIO for
     PCI host bridge apertures, remove those regions from the E820 map
     (E820 entries normally prevent us from allocating BARs). In v5.19,
     we added some quirks to disable E820 checking, but that's not very
     maintainable. EfiMemoryMappedIO means the OS needs to map the
     region for use by EFI runtime services; it shouldn't prevent OS
     from using it.

  PCIe native device hotplug:

   - Build pciehp by default if USB4 is enabled, since Thunderbolt/USB4
     PCIe tunneling depends on native PCIe hotplug.

   - Enable Command Completed Interrupt only if supported to avoid user
     confusion from lspci output that says this is enabled but not
     supported.

   - Prevent pciehp from binding to Switch Upstream Ports; this happened
     because of interaction with acpiphp and caused devices below the
     Upstream Port to disappear.

  Power management:

   - Convert AGP drivers to generic power management. We hope to remove
     legacy power management from the PCI core eventually.

  Virtualization:

   - Fix pci_device_is_present(), which previously always returned
     "false" for VFs, causing virtio hangs when unbinding the driver.

  Miscellaneous:

   - Convert drivers to gpiod API to prepare for dropping some legacy
     code.

   - Fix DOE fencepost error for the maximum data object length.

  Baikal-T1 PCIe controller driver:

   - Add driver and DT bindings.

  Broadcom STB PCIe controller driver:

   - Enable Multi-MSI.

   - Delay 100ms after PERST# deassert to allow power and clocks to
     stabilize.

   - Configure Read Completion Boundary to 64 bytes.

  Freescale i.MX6 PCIe controller driver:

   - Initialize PHY before deasserting core reset to fix a regression in
     v6.0 on boards where the PHY provides the reference.

   - Fix imx6sx and imx8mq clock names in DT schema.

  Intel VMD host bridge driver:

   - Fix Secondary Bus Reset on VMD bridges, which allows reset of NVMe
     SSDs in VT-d pass-through scenarios.

   - Disable MSI remapping, which gets re-enabled by firmware during
     suspend/resume.

  MediaTek PCIe Gen3 controller driver:

   - Add MT7986 and MT8195 support.

  Qualcomm PCIe controller driver:

   - Add SC8280XP/SA8540P basic interconnect support.

  Rockchip DesignWare PCIe controller driver:

   - Base DT schema on common Synopsys schema.

  Synopsys DesignWare PCIe core:

   - Collect DT items shared between Root Port and Endpoint (PERST GPIO,
     PHY info, clocks, resets, link speed, number of lanes, number of
     iATU windows, interrupt info, etc) to snps,dw-pcie-common.yaml.

   - Add dma-ranges support for Root Ports and Endpoints.

   - Consolidate DT resource retrieval for "dbi", "dbi2", "atu", etc. to
     reduce code duplication.

   - Add generic names for clocks and resets to encourage more
     consistent naming across drivers using DesignWare IP.

   - Stop advertising PTM Responder role for Endpoints, which aren't
     allowed to be responders.

  TI J721E PCIe driver:

   - Add j721s2 host mode ID to DT schema.

   - Add interrupt properties to DT schema.

  Toshiba Visconti PCIe controller driver:

   - Fix interrupts array max constraints in DT schema"

* tag 'pci-v6.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (95 commits)
  x86/PCI: Use pr_info() when possible
  x86/PCI: Fix log message typo
  x86/PCI: Tidy E820 removal messages
  PCI: Skip allocate_resource() if too little space available
  efi/x86: Remove EfiMemoryMappedIO from E820 map
  PCI/portdrv: Allow AER service only for Root Ports & RCECs
  PCI: xilinx-nwl: Fix coding style violations
  PCI: mvebu: Switch to using gpiod API
  PCI: pciehp: Enable Command Completed Interrupt only if supported
  PCI: aardvark: Switch to using devm_gpiod_get_optional()
  dt-bindings: PCI: mediatek-gen3: add support for mt7986
  dt-bindings: PCI: mediatek-gen3: add SoC based clock config
  dt-bindings: PCI: qcom: Allow 'dma-coherent' property
  PCI: mt7621: Add sentinel to quirks table
  PCI: vmd: Fix secondary bus reset for Intel bridges
  PCI: endpoint: pci-epf-vntb: Fix sparse ntb->reg build warning
  PCI: endpoint: pci-epf-vntb: Fix sparse build warning for epf_db
  PCI: endpoint: pci-epf-vntb: Replace hardcoded 4 with sizeof(u32)
  PCI: endpoint: pci-epf-vntb: Remove unused epf_db_phy struct member
  PCI: endpoint: pci-epf-vntb: Fix call pci_epc_mem_free_addr() in error path
  ...
2022-12-14 09:54:10 -08:00
Linus Torvalds c1f0fcd85d cxl for 6.2
- Add the cpu_cache_invalidate_memregion() API for cache flushing in
   response to physical memory reconfiguration, or memory-side data
   invalidation from operations like secure erase or memory-device unlock.
 
 - Add a facility for the kernel to warn about collisions between kernel
   and userspace access to PCI configuration registers
 
 - Add support for Restricted CXL Host (RCH) topologies (formerly CXL 1.1)
 
 - Add handling and reporting of CXL errors reported via the PCIe AER
   mechanism
 
 - Add support for CXL Persistent Memory Security commands
 
 - Add support for the "XOR" algorithm for CXL host bridge interleave
 
 - Rework / simplify CXL to NVDIMM interactions
 
 - Miscellaneous cleanups and fixes
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCY5UpyAAKCRDfioYZHlFs
 Z0ttAP4uxCjIibKsFVyexpSgI4vaZqQ9yt9NesmPwonc0XookwD+PlwP6Xc0d0Ox
 t0gJ6+pwdh11NRzhcNE1pAaPcJZU4gs=
 =HAQk
 -----END PGP SIGNATURE-----

Merge tag 'cxl-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl

Pull cxl updates from Dan Williams:
 "Compute Express Link (CXL) updates for 6.2.

  While it may seem backwards, the CXL update this time around includes
  some focus on CXL 1.x enabling where the work to date had been with
  CXL 2.0 (VH topologies) in mind.

  First generation CXL can mostly be supported via BIOS, similar to DDR,
  however it became clear there are use cases for OS native CXL error
  handling and some CXL 3.0 endpoint features can be deployed on CXL 1.x
  hosts (Restricted CXL Host (RCH) topologies). So, this update brings
  RCH topologies into the Linux CXL device model.

  In support of the ongoing CXL 2.0+ enabling two new core kernel
  facilities are added.

  One is the ability for the kernel to flag collisions between userspace
  access to PCI configuration registers and kernel accesses. This is
  brought on by the PCIe Data-Object-Exchange (DOE) facility, a hardware
  mailbox over config-cycles.

  The other is a cpu_cache_invalidate_memregion() API that maps to
  wbinvd_on_all_cpus() on x86. To prevent abuse it is disabled in guest
  VMs and architectures that do not support it yet. The CXL paths that
  need it, dynamic memory region creation and security commands (erase /
  unlock), are disabled when it is not present.

  As for the CXL 2.0+ this cycle the subsystem gains support Persistent
  Memory Security commands, error handling in response to PCIe AER
  notifications, and support for the "XOR" host bridge interleave
  algorithm.

  Summary:

   - Add the cpu_cache_invalidate_memregion() API for cache flushing in
     response to physical memory reconfiguration, or memory-side data
     invalidation from operations like secure erase or memory-device
     unlock.

   - Add a facility for the kernel to warn about collisions between
     kernel and userspace access to PCI configuration registers

   - Add support for Restricted CXL Host (RCH) topologies (formerly CXL
     1.1)

   - Add handling and reporting of CXL errors reported via the PCIe AER
     mechanism

   - Add support for CXL Persistent Memory Security commands

   - Add support for the "XOR" algorithm for CXL host bridge interleave

   - Rework / simplify CXL to NVDIMM interactions

   - Miscellaneous cleanups and fixes"

* tag 'cxl-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (71 commits)
  cxl/region: Fix memdev reuse check
  cxl/pci: Remove endian confusion
  cxl/pci: Add some type-safety to the AER trace points
  cxl/security: Drop security command ioctl uapi
  cxl/mbox: Add variable output size validation for internal commands
  cxl/mbox: Enable cxl_mbox_send_cmd() users to validate output size
  cxl/security: Fix Get Security State output payload endian handling
  cxl: update names for interleave ways conversion macros
  cxl: update names for interleave granularity conversion macros
  cxl/acpi: Warn about an invalid CHBCR in an existing CHBS entry
  tools/testing/cxl: Require cache invalidation bypass
  cxl/acpi: Fail decoder add if CXIMS for HBIG is missing
  cxl/region: Fix spelling mistake "memergion" -> "memregion"
  cxl/regs: Fix sparse warning
  cxl/acpi: Set ACPI's CXL _OSC to indicate RCD mode support
  tools/testing/cxl: Add an RCH topology
  cxl/port: Add RCD endpoint port enumeration
  cxl/mem: Move devm_cxl_add_endpoint() from cxl_core to cxl_mem
  tools/testing/cxl: Add XOR Math support to cxl_test
  cxl/acpi: Support CXL XOR Interleave Math (CXIMS)
  ...
2022-12-12 13:55:31 -08:00
Thomas Gleixner a474d3fbe2 PCI/MSI: Get rid of PCI_MSI_IRQ_DOMAIN
What a zoo:

     PCI_MSI
	select GENERIC_MSI_IRQ

     PCI_MSI_IRQ_DOMAIN
     	def_bool y
	depends on PCI_MSI
	select GENERIC_MSI_IRQ_DOMAIN

Ergo PCI_MSI enables PCI_MSI_IRQ_DOMAIN which in turn selects
GENERIC_MSI_IRQ_DOMAIN. So all the dependencies on PCI_MSI_IRQ_DOMAIN are
just an indirection to PCI_MSI.

Match the reality and just admit that PCI_MSI requires
GENERIC_MSI_IRQ_DOMAIN.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20221111122014.467556921@linutronix.de
2022-11-17 15:15:19 +01:00
Ira Weiny 278294798a PCI: Allow drivers to request exclusive config regions
PCI config space access from user space has traditionally been
unrestricted with writes being an understood risk for device operation.

Unfortunately, device breakage or odd behavior from config writes lacks
indicators that can leave driver writers confused when evaluating
failures.  This is especially true with the new PCIe Data Object
Exchange (DOE) mailbox protocol where backdoor shenanigans from user
space through things such as vendor defined protocols may affect device
operation without complete breakage.

A prior proposal restricted read and writes completely.[1]  Greg and
Bjorn pointed out that proposal is flawed for a couple of reasons.
First, lspci should always be allowed and should not interfere with any
device operation.  Second, setpci is a valuable tool that is sometimes
necessary and it should not be completely restricted.[2]  Finally
methods exist for full lock of device access if required.

Even though access should not be restricted it would be nice for driver
writers to be able to flag critical parts of the config space such that
interference from user space can be detected.

Introduce pci_request_config_region_exclusive() to mark exclusive config
regions.  Such regions trigger a warning and kernel taint if accessed
via user space.

Create pci_warn_once() to restrict the user from spamming the log.

[1] https://lore.kernel.org/all/161663543465.1867664.5674061943008380442.stgit@dwillia2-desk3.amr.corp.intel.com/
[2] https://lore.kernel.org/all/YF8NGeGv9vYcMfTV@kroah.com/

Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20220926215711.2893286-2-ira.weiny@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-11-14 10:07:22 -08:00
Pali Rohár c14f7ccc9f PCI: Assign PCI domain IDs by ida_alloc()
Replace assignment of PCI domain IDs from atomic_inc_return() to
ida_alloc().

Use two IDAs, one for static domain allocations (those which are defined in
device tree) and second for dynamic allocations (all other).

During removal of root bus / host bridge, also release the domain ID.  The
released ID can be reused again, for example when dynamically loading and
unloading native PCI host bridge drivers.

This change also allows to mix static device tree assignment and dynamic by
kernel as all static allocations are reserved in dynamic pool.

[bhelgaas: set "err" if "bus->domain_nr < 0"]
Link: https://lore.kernel.org/r/20220714184130.5436-1-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-11-08 11:14:18 -06:00
Bjorn Helgaas 44e985938e Revert "PCI: Clear PCI_STATUS when setting up device"
This reverts commit 6cd514e58f.

Christophe Fergeau reported that 6cd514e58f ("PCI: Clear PCI_STATUS when
setting up device") causes boot failures when trying to start linux guests
with Apple's virtualization framework (for example using
https://developer.apple.com/documentation/virtualization/running_linux_in_a_virtual_machine?language=objc)

6cd514e58f only solved a cosmetic problem, so revert it to fix the boot
failures.

Link: https://bugzilla.redhat.com/show_bug.cgi?id=2137803
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-11-07 15:31:08 -06:00
Mika Westerberg 58e011609c PCI: Fix typo in pci_scan_child_bus_extend()
Should be 'if' not 'of'. Fix this.

Link: https://lore.kernel.org/r/20220905080232.36087-7-mika.westerberg@linux.intel.com
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-09-21 14:50:35 -05:00
Mika Westerberg 17d2d67d76 PCI: Fix whitespace and indentation
Drop two empty lines from pci_scan_child_bus_extend() and correct
indentation in pci_bridge_distribute_available_resources() to better
follow the kernel coding style.

No functional impact.

Link: https://lore.kernel.org/r/20220905080232.36087-6-mika.westerberg@linux.intel.com
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-09-21 14:50:35 -05:00
Mika Westerberg 49ad31e9d7 PCI: Pass available buses even if the bridge is already configured
If some part of the PCI topology is already configured (by the boot
firmware) but not all, and it includes hotplug bridges, we may need to
extend the bus resources of those bridges to accommodate any future
hotplugs, in the same way we already do with the normal hotplug case.

Pass the available buses to pci_scan_child_bus_extend() even when the
bridge in question is already configured so the bus allocation code can use
these available buses to extend the possible hotplug bridges below.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216000
Link: https://lore.kernel.org/r/20220905080232.36087-3-mika.westerberg@linux.intel.com
Reported-by: Chris Chiu <chris.chiu@canonical.com>
Tested-by: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-09-21 14:46:48 -05:00
Mika Westerberg 8066cc86b7 PCI: Fix used_buses calculation in pci_scan_child_bus_extend()
pci_scan_bridge_extend() returns the subordinate bus number needed to cover
all the buses below a bridge.  pci_scan_child_bus_extend() computes the
number of buses to reserve by comparing that with the current max bus
number.  Previously it did the subtraction in the wrong order, so
'used_buses' was nonsense.

Subtract 'max' from 'cmax' as is done for the similar
pci_scan_bridge_extend() call in the following block.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216000
Fixes: 3374c545c2 ("PCI: Account for all bridges on bus when distributing bus numbers")
Link: https://lore.kernel.org/r/20220905080232.36087-2-mika.westerberg@linux.intel.com
Reported-by: Chris Chiu <chris.chiu@canonical.com>
Tested-by: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-09-20 18:19:11 -05:00
Linus Torvalds c235698355 cxl for 6.0
- Introduce a 'struct cxl_region' object with support for provisioning
   and assembling persistent memory regions.
 
 - Introduce alloc_free_mem_region() to accompany the existing
   request_free_mem_region() as a method to allocate physical memory
   capacity out of an existing resource.
 
 - Export insert_resource_expand_to_fit() for the CXL subsystem to
   late-publish CXL platform windows in iomem_resource.
 
 - Add a polled mode PCI DOE (Data Object Exchange) driver service and
   use it in cxl_pci to retrieve the CDAT (Coherent Device Attribute
   Table).
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYvLYmAAKCRDfioYZHlFs
 Z0pbAQC/3j+WriWpU7CdhrnZI1Wqn+x5IIklF0Lc4/f6LwGZtAEAsSbLpItzvwqx
 M/rcLaeLpwYlgvS1JjdsuQ2VQ7KOtAs=
 =ehNT
 -----END PGP SIGNATURE-----

Merge tag 'cxl-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl

Pull cxl updates from Dan Williams:
 "Compute Express Link (CXL) updates for 6.0:

   - Introduce a 'struct cxl_region' object with support for
     provisioning and assembling persistent memory regions.

   - Introduce alloc_free_mem_region() to accompany the existing
     request_free_mem_region() as a method to allocate physical memory
     capacity out of an existing resource.

   - Export insert_resource_expand_to_fit() for the CXL subsystem to
     late-publish CXL platform windows in iomem_resource.

   - Add a polled mode PCI DOE (Data Object Exchange) driver service and
     use it in cxl_pci to retrieve the CDAT (Coherent Device Attribute
     Table)"

* tag 'cxl-for-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (74 commits)
  cxl/hdm: Fix skip allocations vs multiple pmem allocations
  cxl/region: Disallow region granularity != window granularity
  cxl/region: Fix x1 interleave to greater than x1 interleave routing
  cxl/region: Move HPA setup to cxl_region_attach()
  cxl/region: Fix decoder interleave programming
  Documentation: cxl: remove dangling kernel-doc reference
  cxl/region: describe targets and nr_targets members of cxl_region_params
  cxl/regions: add padding for cxl_rr_ep_add nested lists
  cxl/region: Fix IS_ERR() vs NULL check
  cxl/region: Fix region reference target accounting
  cxl/region: Fix region commit uninitialized variable warning
  cxl/region: Fix port setup uninitialized variable warnings
  cxl/region: Stop initializing interleave granularity
  cxl/hdm: Fix DPA reservation vs cxl_endpoint_decoder lifetime
  cxl/acpi: Minimize granularity for x1 interleaves
  cxl/region: Delete 'region' attribute from root decoders
  cxl/acpi: Autoload driver for 'cxl_acpi' test devices
  cxl/region: decrement ->nr_targets on error in cxl_region_attach()
  cxl/region: prevent underflow in ways_to_cxl()
  cxl/region: uninitialized variable in alloc_hpa()
  ...
2022-08-10 11:07:26 -07:00
Bjorn Helgaas 5a20930f27 Merge branch 'pci/err'
- Recognize disconnected devices so we don't bother trying to set them to
  "frozen" or "normal" state (Christoph Hellwig)

- Clear PCI Status register during enumeration in case firmware left errors
  logged (Kai-Heng Feng)

- Configure ECRC for every device, including hot-added ones (Stefan Roese)

- Keep AER error reporting enabled for switches (Stefan Roese)

- Enable error reporting for all devices that support AER (Stefan Roese)

- Iterate over error counters instead of error strings to avoid printing
  junk in AER sysfs counters (Mohamed Khalfella)

* pci/err:
  PCI/AER: Iterate over error counters instead of error strings
  PCI/AER: Enable error reporting when AER is native
  PCI/portdrv: Don't disable AER reporting in get_port_device_capability()
  PCI/AER: Configure ECRC for every device
  PCI: Clear PCI_STATUS when setting up device
  PCI/ERR: Recognize disconnected devices in report_error_detected()
2022-08-04 11:41:52 -05:00
Niklas Schnelle 189c6c33ff PCI: Extend isolated function probing to s390
Like the jailhouse hypervisor, s390's PCI architecture allows passing
isolated PCI functions to a guest OS instance. As of now this is was not
utilized even with multi-function support as the s390 PCI code makes sure
that only virtual PCI busses including a function with devfn 0 are
presented to the PCI subsystem. A subsequent change will remove this
restriction.

Allow probing such functions by replacing the existing check for
jailhouse_paravirt() with a new hypervisor_isolated_pci_functions() helper.

Link: https://lore.kernel.org/r/20220628143100.3228092-5-schnelle@linux.ibm.com
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
2022-07-22 16:06:03 -05:00
Niklas Schnelle db360b1ea7 PCI: Move jailhouse's isolated function handling to pci_scan_slot()
The special case of the jailhouse hypervisor passing through individual PCI
functions handles scanning for PCI functions even if function 0 does not
exist. Previously this was done with an extra loop duplicating the one in
pci_scan_slot(). By incorporating the check for jailhouse_paravirt() into
pci_scan_slot() we can instead do this as part of the normal slot scan.
Note that with the assignment of dev->multifunction gated by fn > 0 we set
dev->multifunction unconditionally for all functions if function 0 is
missing just as in the existing jailhouse loop.

The only functional change is that we now call pcie_aspm_init_link_state()
for these functions, but this already happened if function 0 was passed
through and should not be a problem.

Link: https://lore.kernel.org/linux-pci/20220408224514.GA353445@bhelgaas/
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20220628143100.3228092-4-schnelle@linux.ibm.com
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
2022-07-22 16:05:21 -05:00
Niklas Schnelle fbed59ed87 PCI: Split out next_ari_fn() from next_fn()
In commit b1bd58e448 ("PCI: Consolidate "next-function" functions") the
next_fn() function subsumed the traditional and ARI-based next function
determination. This got rid of some needlessly complex function pointer
handling but also reduced the separation between these very different
methods of finding the next function. With the next_fn() cleaned up a bit
we can re-introduce this separation by moving out the ARI handling while
sticking with direct function calls.

Link: https://lore.kernel.org/r/20220628143100.3228092-3-schnelle@linux.ibm.com
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
2022-07-22 16:05:00 -05:00
Niklas Schnelle c3df83e01a PCI: Clean up pci_scan_slot()
While determining the next PCI function is factored out of pci_scan_slot()
into next_fn(), the former still handles the first function as a special
case, which duplicates the code from the scan loop.

Furthermore the non-ARI branch of next_fn() is generally hard to understand
and especially the check for multifunction devices is hidden in the
handling of NULL devices for non-contiguous multifunction. It also signals
that no further functions need to be scanned by returning 0 via wraparound
and this is a valid function number.

Improve upon this by transforming the conditions in next_fn() to be easier
to understand.

By changing next_fn() to return -ENODEV instead of 0 when there is no next
function we can then handle the initial function inside the loop and
deduplicate the shared handling. This also makes it more explicit that only
function 0 must exist.

No functional change is intended.

Link: https://lore.kernel.org/r/20220628143100.3228092-2-schnelle@linux.ibm.com
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
2022-07-22 16:04:16 -05:00
Ira Weiny b559afd53a PCI: Replace magic constant for PCI Sig Vendor ID
Replace the magic value in pci_bus_crs_vendor_id() with
PCI_VENDOR_ID_PCI_SIG.

Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20220719205249.566684-3-ira.weiny@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-07-19 15:38:04 -07:00
Kai-Heng Feng 6cd514e58f PCI: Clear PCI_STATUS when setting up device
We are seeing Master Abort bit is set on Intel I350 ethernet device and its
root port right after boot, probably happened during BIOS phase:

  00:06.0 PCI bridge [0604]: Intel Corporation Device [8086:464d] (rev 05) (prog-if 00 [Normal decode])
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-

  6e:00.0 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] (rev 01)
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-

The Master Abort bit is cleared after S3.

Since there's no functional impact found, clear the PCI_STATUS to treat it
anew at setting up.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215989
Link: https://lore.kernel.org/r/20220517043738.2308499-1-kai.heng.feng@canonical.com
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-07-05 15:43:30 -05:00
Linus Torvalds d0a231f01e pci-v5.17-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmHgpugUHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vz59g//eWRLb0j2Vgv84ZH4x1iv6MaBboQr
 2wScnfoN+MIoh+tuM4kRak15X4nB8rJhNZZCzesMUN6PeZvrkoPo4sz/xdzIrA/N
 qY3h8NZ3nC4yCvs/tGem0zZUcSCJsxUAD0eegyMSa142xGIOQTHBSJRflR9osKSo
 bnQlKTkugV8t4kD7NlQ5M3HzN3R+mjsII5JNzCqv2XlzAZG3D8DhPyIpZnRNAOmW
 KiHOVXvQOocfUlvSs5kBlhgR1HgJkGnruCrJ1iDCWQH1Zk0iuVgoZWgVda6Cs3Xv
 gcTJLB7VoSdNZKnct9aMNYPKziHkYc7clilPeDsJs5TlSv3kKERzLj6c/5ZAxFWN
 +RsH+zYHDXJSsL/w0twPnaF5WCuVYUyrs3UiSjUvShKl1T9k9J+Jo8zwUUZx8Xb0
 qXX8jRGMHolBGwPXm2fHEb4bwTUI8emPj29qK4L96KsQ3zKXWB8eGSosxUP52Tti
 RR2WZjkvwlREZCJp6jSEJYkhzoEaVAm8CjKpKUuneX9WcUOsMBSs9k7EXbUy7JeM
 hq5Keuqa8PZo/IK2DYYAchNnBJUDMsWJeduBW12qSmx3J+9victP2qOFu+9skP0a
 85xlO6Cx8beiQh+XnY7jyROvIFuxTnGKHgkq/89Ham/whEzdJ+GRIiYB218kLLCW
 ILdas3C2iiGz99I=
 =Vgg4
 -----END PGP SIGNATURE-----

Merge tag 'pci-v5.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull pci updates from Bjorn Helgaas:
 "Enumeration:
   - Use pci_find_vsec_capability() instead of open-coding it (Andy
     Shevchenko)
   - Convert pci_dev_present() stub from macro to static inline to avoid
     'unused variable' errors (Hans de Goede)
   - Convert sysfs slot attributes from default_attrs to default_groups
     (Greg Kroah-Hartman)
   - Use DWORD accesses for LTR, L1 SS to avoid BayHub OZ711LV2 erratum
     (Rajat Jain)
   - Remove unnecessary initialization of static variables (Longji Guo)

  Resource management:
   - Always write Intel I210 ROM BAR on update to work around device
     defect (Bjorn Helgaas)

  PCIe native device hotplug:
   - Fix pciehp lockdep errors on Thunderbolt undock (Hans de Goede)
   - Fix infinite loop in pciehp IRQ handler on power fault (Lukas
     Wunner)

  Power management:
   - Convert amd64-agp, sis-agp, via-agp from legacy PCI power
     management to generic power management (Vaibhav Gupta)

  IOMMU:
   - Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller
     so it can work with an IOMMU (Yifeng Li)

  Error handling:
   - Add PCI_ERROR_RESPONSE and related definitions for signaling and
     checking for transaction errors on PCI (Naveen Naidu)
   - Fabricate PCI_ERROR_RESPONSE data (~0) in config read wrappers,
     instead of in host controller drivers, when transactions fail on
     PCI (Naveen Naidu)
   - Use PCI_POSSIBLE_ERROR() to check for possible failure of config
     reads (Naveen Naidu)

  Peer-to-peer DMA:
   - Add Logan Gunthorpe as P2PDMA maintainer (Bjorn Helgaas)

  ASPM:
   - Calculate link L0s and L1 exit latencies when needed instead of
     caching them (Saheed O. Bolarinwa)
   - Calculate device L0s and L1 acceptable exit latencies when needed
     instead of caching them (Saheed O. Bolarinwa)
   - Remove struct aspm_latency since it's no longer needed (Saheed O.
     Bolarinwa)

  APM X-Gene PCIe controller driver:
   - Fix IB window setup, which was broken by the fact that IB resources
     are now sorted in address order instead of DT dma-ranges order (Rob
     Herring)

  Apple PCIe controller driver:
   - Enable clock gating to save power (Hector Martin)
   - Fix REFCLK1 enable/poll logic (Hector Martin)

  Broadcom STB PCIe controller driver:
   - Declare bitmap correctly for use by bitmap interfaces (Christophe
     JAILLET)
   - Clean up computation of legacy and non-legacy MSI bitmasks (Florian
     Fainelli)
   - Update suspend/resume/remove error handling to warn about errors
     and not fail the operation (Jim Quinlan)
   - Correct the "pcie" and "msi" interrupt descriptions in DT binding
     (Jim Quinlan)
   - Add DT bindings for endpoint voltage regulators (Jim Quinlan)
   - Split brcm_pcie_setup() into two functions (Jim Quinlan)
   - Add mechanism for turning on voltage regulators for connected
     devices (Jim Quinlan)
   - Turn voltage regulators for connected devices on/off when bus is
     added or removed (Jim Quinlan)
   - When suspending, don't turn off voltage regulators for wakeup
     devices (Jim Quinlan)

  Freescale i.MX6 PCIe controller driver:
   - Add i.MX8MM support (Richard Zhu)

  Freescale Layerscape PCIe controller driver:
   - Use DWC common ops instead of layerscape-specific link-up functions
     (Hou Zhiqiang)

  Intel VMD host bridge driver:
   - Honor platform ACPI _OSC feature negotiation for Root Ports below
     VMD (Kai-Heng Feng)
   - Add support for Raptor Lake SKUs (Karthik L Gopalakrishnan)
   - Reset everything below VMD before enumerating to work around
     failure to enumerate NVMe devices when guest OS reboots (Nirmal
     Patel)

  Bridge emulation (used by Marvell Aardvark and MVEBU):
   - Make emulated ROM BAR read-only by default (Pali Rohár)
   - Make some emulated legacy PCI bits read-only for PCIe devices (Pali
     Rohár)
   - Update reserved bits in emulated PCIe Capability (Pali Rohár)
   - Allow drivers to emulate different PCIe Capability versions (Pali
     Rohár)
   - Set emulated Capabilities List bit for all PCIe devices, since they
     must have at least a PCIe Capability (Pali Rohár)

  Marvell Aardvark PCIe controller driver:
   - Add bridge emulation definitions for PCIe DEVCAP2, DEVCTL2,
     DEVSTA2, LNKCAP2, LNKCTL2, LNKSTA2, SLTCAP2, SLTCTL2, SLTSTA2 (Pali
     Rohár)
   - Add aardvark support for DEVCAP2, DEVCTL2, LNKCAP2 and LNKCTL2
     registers (Pali Rohár)
   - Clear all MSIs at setup to avoid spurious interrupts (Pali Rohár)
   - Disable bus mastering when unbinding host controller driver (Pali
     Rohár)
   - Mask all interrupts when unbinding host controller driver (Pali
     Rohár)
   - Fix memory leak in host controller unbind (Pali Rohár)
   - Assert PERST# when unbinding host controller driver (Pali Rohár)
   - Disable link training when unbinding host controller driver (Pali
     Rohár)
   - Disable common PHY when unbinding host controller driver (Pali
     Rohár)
   - Fix resource type checking to check only IORESOURCE_MEM, not
     IORESOURCE_MEM_64, which is a flavor of IORESOURCE_MEM (Pali Rohár)

  Marvell MVEBU PCIe controller driver:
   - Implement pci_remap_iospace() for ARM so mvebu can use
     devm_pci_remap_iospace() instead of the previous ARM-specific
     pci_ioremap_io() interface (Pali Rohár)
   - Use the standard pci_host_probe() instead of the device-specific
     mvebu_pci_host_probe() (Pali Rohár)
   - Replace all uses of ARM-specific pci_ioremap_io() with the ARM
     implementation of the standard pci_remap_iospace() interface and
     remove pci_ioremap_io() (Pali Rohár)
   - Skip initializing invalid Root Ports (Pali Rohár)
   - Check for errors from pci_bridge_emul_init() (Pali Rohár)
   - Ignore any bridges at non-zero function numbers (Pali Rohár)
   - Return ~0 data for invalid config read size (Pali Rohár)
   - Disallow mapping interrupts on emulated bridges (Pali Rohár)
   - Clear Root Port Memory & I/O Space Enable and Bus Master Enable at
     initialization (Pali Rohár)
   - Make type bits in Root Port I/O Base register read-only (Pali
     Rohár)
   - Disable Root Port windows when base/limit set to invalid values
     (Pali Rohár)
   - Set controller to Root Complex mode (Pali Rohár)
   - Set Root Port Class Code to PCI Bridge (Pali Rohár)
   - Update emulated Root Port secondary bus numbers to better reflect
     the actual topology (Pali Rohár)
   - Add PCI_BRIDGE_CTL_BUS_RESET support to emulated Root Ports so
     pci_reset_secondary_bus() can reset connected devices (Pali Rohár)
   - Add PCI_EXP_DEVCTL Error Reporting Enable support to emulated Root
     Ports (Pali Rohár)
   - Add PCI_EXP_RTSTA PME Status bit support to emulated Root Ports
     (Pali Rohár)
   - Add DEVCAP2, DEVCTL2 and LNKCTL2 support to emulated Root Ports on
     Armada XP and newer devices (Pali Rohár)
   - Export mvebu-mbus.c symbols to allow pci-mvebu.c to be a module
     (Pali Rohár)
   - Add support for compiling as a module (Pali Rohár)

  MediaTek PCIe controller driver:
   - Assert PERST# for 100ms to allow power and clock to stabilize
     (qizhong cheng)

  MediaTek PCIe Gen3 controller driver:
   - Disable Mediatek DVFSRC voltage request since lack of DVFSRC to
     respond to the request causes failure to exit L1 PM Substate
     (Jianjun Wang)

  MediaTek MT7621 PCIe controller driver:
   - Declare mt7621_pci_ops static (Sergio Paracuellos)
   - Give pcibios_root_bridge_prepare() access to host bridge windows
     (Sergio Paracuellos)
   - Move MIPS I/O coherency unit setup from driver to
     pcibios_root_bridge_prepare() (Sergio Paracuellos)
   - Add missing MODULE_LICENSE() (Sergio Paracuellos)
   - Allow COMPILE_TEST for all arches (Sergio Paracuellos)

  Microsoft Hyper-V host bridge driver:
   - Add hv-internal interfaces to encapsulate arch IRQ dependencies
     (Sunil Muthuswamy)
   - Add arm64 Hyper-V vPCI support (Sunil Muthuswamy)

  Qualcomm PCIe controller driver:
   - Undo PM setup in qcom_pcie_probe() error handling path (Christophe
     JAILLET)
   - Use __be16 type to store return value from cpu_to_be16()
     (Manivannan Sadhasivam)
   - Constify static dw_pcie_ep_ops (Rikard Falkeborn)

  Renesas R-Car PCIe controller driver:
   - Fix aarch32 abort handler so it doesn't check the wrong bus clock
     before accessing the host controller (Marek Vasut)

  TI Keystone PCIe controller driver:
   - Add register offset for ti,syscon-pcie-id and ti,syscon-pcie-mode
     DT properties (Kishon Vijay Abraham I)

  MicroSemi Switchtec management driver:
   - Add Gen4 automotive device IDs (Kelvin Cao)
   - Declare state_names[] as static so it's not allocated and
     initialized for every call (Kelvin Cao)

  Host controller driver cleanups:
   - Use of_device_get_match_data(), not of_match_device(), when we only
     need the device data in altera, artpec6, cadence, designware-plat,
     dra7xx, keystone, kirin (Fan Fei)
   - Drop pointless of_device_get_match_data() cast in j721e (Bjorn
     Helgaas)
   - Drop redundant struct device * from j721e since struct cdns_pcie
     already has one (Bjorn Helgaas)
   - Rename driver structs to *_pcie in intel-gw, iproc, ls-gen4,
     mediatek-gen3, microchip, mt7621, rcar-gen2, tegra194, uniphier,
     xgene, xilinx, xilinx-cpm for consistency across drivers (Fan Fei)
   - Fix invalid address space conversions in hisi, spear13xx (Bjorn
     Helgaas)

  Miscellaneous:
   - Sort Intel Device IDs by value (Andy Shevchenko)
   - Change Capability offsets to hex to match spec (Baruch Siach)
   - Correct misspellings (Krzysztof Wilczyński)
   - Terminate statement with semicolon in pci_endpoint_test.c (Ming
     Wang)"

* tag 'pci-v5.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (151 commits)
  PCI: mt7621: Allow COMPILE_TEST for all arches
  PCI: mt7621: Add missing MODULE_LICENSE()
  PCI: mt7621: Move MIPS setup to pcibios_root_bridge_prepare()
  PCI: Let pcibios_root_bridge_prepare() access bridge->windows
  PCI: mt7621: Declare mt7621_pci_ops static
  PCI: brcmstb: Do not turn off WOL regulators on suspend
  PCI: brcmstb: Add control of subdevice voltage regulators
  PCI: brcmstb: Add mechanism to turn on subdev regulators
  PCI: brcmstb: Split brcm_pcie_setup() into two funcs
  dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators
  dt-bindings: PCI: Correct brcmstb interrupts, interrupt-map.
  PCI: brcmstb: Fix function return value handling
  PCI: brcmstb: Do not use __GENMASK
  PCI: brcmstb: Declare 'used' as bitmap, not unsigned long
  PCI: hv: Add arm64 Hyper-V vPCI support
  PCI: hv: Make the code arch neutral by adding arch specific interfaces
  PCI: pciehp: Use down_read/write_nested(reset_lock) to fix lockdep errors
  x86/PCI: Remove initialization of static variables to false
  PCI: Use DWORD accesses for LTR, L1 SS to avoid erratum
  misc: pci_endpoint_test: Terminate statement with semicolon
  ...
2022-01-16 08:08:11 +02:00
Bjorn Helgaas f5d3ca6fff Merge branch 'pci/errors'
- Add PCI_ERROR_RESPONSE and related definitions for signaling and checking
  for transaction errors on PCI (Naveen Naidu)

- Fabricate PCI_ERROR_RESPONSE data (~0) in config read wrappers, instead
  of in host controller drivers, when transactions fail on PCI (Naveen
  Naidu)

- Use PCI_POSSIBLE_ERROR() to check for possible failure of config reads
  (Naveen Naidu)

* pci/errors:
  PCI: xgene: Use PCI_ERROR_RESPONSE to identify config read errors
  PCI: hv: Use PCI_ERROR_RESPONSE to identify config read errors
  PCI: keystone: Use PCI_ERROR_RESPONSE to identify config read errors
  PCI: Use PCI_ERROR_RESPONSE to identify config read errors
  PCI: cpqphp: Use PCI_POSSIBLE_ERROR() to check config reads
  PCI/PME: Use PCI_POSSIBLE_ERROR() to check config reads
  PCI/DPC: Use PCI_POSSIBLE_ERROR() to check config reads
  PCI: pciehp: Use PCI_POSSIBLE_ERROR() to check config reads
  PCI: vmd: Use PCI_POSSIBLE_ERROR() to check config reads
  PCI/ERR: Use PCI_POSSIBLE_ERROR() to check config reads
  PCI: rockchip-host: Drop error data fabrication when config read fails
  PCI: rcar-host: Drop error data fabrication when config read fails
  PCI: altera: Drop error data fabrication when config read fails
  PCI: mvebu: Drop error data fabrication when config read fails
  PCI: aardvark: Drop error data fabrication when config read fails
  PCI: kirin: Drop error data fabrication when config read fails
  PCI: histb: Drop error data fabrication when config read fails
  PCI: exynos: Drop error data fabrication when config read fails
  PCI: mediatek: Drop error data fabrication when config read fails
  PCI: iproc: Drop error data fabrication when config read fails
  PCI: thunder: Drop error data fabrication when config read fails
  PCI: Drop error data fabrication when config read fails
  PCI: Use PCI_SET_ERROR_RESPONSE() for disconnected devices
  PCI: Set error response data when config read fails
  PCI: Add PCI_ERROR_RESPONSE and related definitions
2022-01-13 09:57:52 -06:00
Bjorn Helgaas fc10f9d667 Merge branch 'pci/host/mt7621'
- Declare mt7621_pci_ops static (Sergio Paracuellos)

- Give pcibios_root_bridge_prepare() access to host bridge windows (Sergio
  Paracuellos)

- Move MIPS I/O coherency unit setup from driver to
  pcibios_root_bridge_prepare() (Sergio Paracuellos)

- Add missing MODULE_LICENSE() (Sergio Paracuellos)

- Allow COMPILE_TEST for all arches (Sergio Paracuellos)

* pci/host/mt7621:
  PCI: mt7621: Allow COMPILE_TEST for all arches
  PCI: mt7621: Add missing MODULE_LICENSE()
  PCI: mt7621: Move MIPS setup to pcibios_root_bridge_prepare()
  PCI: Let pcibios_root_bridge_prepare() access bridge->windows
  PCI: mt7621: Declare mt7621_pci_ops static
2022-01-13 09:57:49 -06:00
Sergio Paracuellos 661c4c4f26 PCI: Let pcibios_root_bridge_prepare() access bridge->windows
When pci_register_host_bridge() is called, bridge->windows are already
available. However these windows are being moved temporarily from there.

To let pcibios_root_bridge_prepare() have access to these windows, move the
windows movement after calling this function. This is useful for the MIPS
ralink mt7621 platform so it can set up I/O coherence units and avoid
custom MIPS code in the mt7621 PCIe controller driver.

Link: https://lore.kernel.org/r/20211207104924.21327-2-sergio.paracuellos@gmail.com
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2022-01-12 15:37:10 -06:00
Thomas Gleixner cd119b09a8 PCI/MSI: Move msi_lock to struct pci_dev
It's only required for PCI/MSI. So no point in having it in every struct
device.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20211206210224.925241961@linutronix.de
2021-12-09 11:52:22 +01:00
Naveen Naidu fa52b6447c PCI/ERR: Use PCI_POSSIBLE_ERROR() to check config reads
When config pci_ops.read() can detect failed PCI transactions, the data
returned to the CPU is PCI_ERROR_RESPONSE (~0 or 0xffffffff).

Obviously a successful PCI config read may *also* return that data if a
config register happens to contain ~0, so it doesn't definitively indicate
an error unless we know the register cannot contain ~0.

Use PCI_POSSIBLE_ERROR() to check the response we get when we read data
from hardware.  This unifies PCI error response checking and makes error
checks consistent and easier to find.

Link: https://lore.kernel.org/r/f4d18d470cb90f9cb52ea155b01528ba2e76e8d6.1637243717.git.naveennaidu479@gmail.com
Signed-off-by: Naveen Naidu <naveennaidu479@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-11-18 14:12:57 -06:00
Andy Shevchenko d2c64f98c3 PCI: Use pci_find_vsec_capability() when looking for TBT devices
Currently set_pcie_thunderbolt() open-codes pci_find_vsec_capability().
Refactor the former to use the latter. No functional change intended.

Link: https://lore.kernel.org/r/20211115112902.24033-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
2021-11-15 14:01:11 -06:00
Bjorn Helgaas 78be29ab54 Merge branch 'pci/misc'
- Tidy setup-irq.c comments (Pranay Sanghai)

- Fix misspellings (Krzysztof Wilczyński)

- Fix sprintf(), sscanf() format mismatches (Krzysztof Wilczyński)

- Tidy cpqphp code formatting (Krzysztof Wilczyński)

- Remove unused pci_pool wrappers, which have been replaced by dma_pool
  (Cai Huoqing)

- Remove a redundant initialization in __pci_reset_function_locked() (Colin
  Ian King)

- Use 'unsigned int' instead of 'unsigned' (Krzysztof Wilczyński)

- Update PCI subsystem information in MAINTAINERS (Krzysztof Wilczyński)

- Include generic <linux/> headers instead of <asm/> for cpqphp and vmd
  (Krzysztof Wilczyński)

* pci/misc:
  PCI: vmd: Drop redundant includes of <asm/device.h>, <asm/msi.h>
  PCI: cpqphp: Use <linux/io.h> instead of <asm/io.h>
  MAINTAINERS: Update PCI subsystem information
  PCI: Prefer 'unsigned int' over bare 'unsigned'
  PCI: Remove redundant 'rc' initialization
  PCI: Remove unused pci_pool wrappers
  PCI: cpqphp: Format if-statement code block correctly
  PCI: Use unsigned to match sscanf("%x") in pci_dev_str_match_path()
  PCI: hv: Remove unnecessary use of %hx
  PCI: Correct misspelled and remove duplicated words
  PCI: Tidy comments
2021-11-05 11:28:47 -05:00
Bjorn Helgaas 1ebec13fc9 Merge branch 'pci/resource'
- Coalesce host bridge contiguous apertures to allow P2P bridge windows
  that span several contiguous host bridge apertures (Kai-Heng Feng)

* pci/resource:
  PCI: Coalesce host bridge contiguous apertures
2021-11-05 11:28:45 -05:00
Bjorn Helgaas 1cac57a267 Merge branch 'pci/enumeration'
- Rename pcibios_add_device() to pcibios_device_add() since it's called
  from pci_device_add() (Oliver O'Halloran)

- Don't try to enable AtomicOps on VFs, since they can only be enabled on
  the PF (Selvin Xavier)

* pci/enumeration:
  PCI: Do not enable AtomicOps on VFs
  PCI: Rename pcibios_add_device() to pcibios_device_add()
2021-11-05 11:28:42 -05:00
Krzysztof Wilczyński fd1ae23b49 PCI: Prefer 'unsigned int' over bare 'unsigned'
The bare "unsigned" type implicitly means "unsigned int", but the preferred
coding style is to use the complete type name.

Update the bare use of "unsigned" to the preferred "unsigned int".

No change to functionality intended.

See a1ce18e4f9 ("checkpatch: warn on bare unsigned or signed declarations
without int").

Link: https://lore.kernel.org/r/20211013014136.1117543-1-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-27 13:41:22 -05:00
Mingchuang Qiao e1b0d0bb20 PCI: Re-enable Downstream Port LTR after reset or hotplug
Per PCIe r5.0, sec 7.5.3.16, Downstream Ports must disable LTR if the link
goes down (the Port goes DL_Down status).  This is a problem because the
Downstream Port's dev->ltr_path is still set, so we think LTR is still
enabled, and we enable LTR in the Endpoint.  When it sends LTR messages,
they cause Unsupported Request errors at the Downstream Port.

This happens in the reset path, where we may enable LTR in
pci_restore_pcie_state() even though the Downstream Port disabled LTR
because the reset caused a link down event.

It also happens in the hot-remove and hot-add path, where we may enable LTR
in pci_configure_ltr() even though the Downstream Port disabled LTR when
the hot-remove took the link down.

In these two scenarios, check the upstream bridge and restore its LTR
enable if appropriate.

The Unsupported Request may be logged by AER as follows:

  pcieport 0000:00:1d.0: AER: Uncorrected (Non-Fatal) error received: id=00e8
  pcieport 0000:00:1d.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, id=00e8(Requester ID)
  pcieport 0000:00:1d.0:   device [8086:9d18] error status/mask=00100000/00010000
  pcieport 0000:00:1d.0:    [20] Unsupported Request    (First)

In addition, if LTR is not configured correctly, the link cannot enter the
L1.2 state, which prevents some machines from entering the S0ix low power
state.

[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20211012075614.54576-1-mingchuang.qiao@mediatek.com
Reported-by: Utkarsh H Patel <utkarsh.h.patel@intel.com>
Signed-off-by: Mingchuang Qiao <mingchuang.qiao@mediatek.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-10-19 15:57:44 -05:00
Kai-Heng Feng 7c3855c423 PCI: Coalesce host bridge contiguous apertures
Built-in graphics at 07:00.0 on HP EliteDesk 805 G6 doesn't work because
graphics can't get the BAR it needs.  The BIOS configuration is
correct: BARs 0 and 2 both fit in the 00:08.1 bridge window.

But that 00:08.1 window covers two host bridge apertures from _CRS.
Previously we assumed this was illegal, so we clipped the window to fit
into one aperture (see 0f7e7aee2f ("PCI: Add pci_bus_clip_resource() to
clip to fit upstream window")).

  pci_bus 0000:00: root bus resource [mem 0x10020200000-0x100303fffff window]
  pci_bus 0000:00: root bus resource [mem 0x10030400000-0x100401fffff window]

  pci 0000:00:08.1:   bridge window [mem 0x10030000000-0x100401fffff 64bit pref]
  pci 0000:07:00.0: reg 0x10: [mem 0x10030000000-0x1003fffffff 64bit pref]
  pci 0000:07:00.0: reg 0x18: [mem 0x10040000000-0x100401fffff 64bit pref]

  pci 0000:00:08.1: can't claim BAR 15 [mem 0x10030000000-0x100401fffff 64bit pref]: no compatible bridge window
  pci 0000:00:08.1: [mem 0x10030000000-0x100401fffff 64bit pref] clipped to [mem 0x10030000000-0x100303fffff 64bit pref]
  pci 0000:00:08.1:   bridge window [mem 0x10030000000-0x100303fffff 64bit pref]

  pci 0000:07:00.0: can't claim BAR 0 [mem 0x10030000000-0x1003fffffff 64bit pref]: no compatible bridge window
  pci 0000:07:00.0: can't claim BAR 2 [mem 0x10040000000-0x100401fffff 64bit pref]: no compatible bridge window

However, the host bridge apertures are contiguous, so there's no need to
clip in this case.  Coalesce contiguous apertures so we can allocate from
the entire contiguous region.

Previous commit 65db04053e ("PCI: Coalesce host bridge contiguous
apertures") was similar but sorted the apertures, and Guenter Roeck
reported a regression in ppc:sam460ex qemu emulation from nvme; see
https://lore.kernel.org/all/20210709231529.GA3270116@roeck-us.net/

[bhelgaas: commit log]
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212013
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20210713125007.1260304-1-kai.heng.feng@canonical.com
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Guenter Roeck <linux@roeck-us.net>
2021-09-29 16:25:20 -05:00
Oliver O'Halloran 06dc660e6e PCI: Rename pcibios_add_device() to pcibios_device_add()
The general convention for pcibios_* hooks is that they're named after the
corresponding pci_* function they provide a hook for. The exception is
pcibios_add_device() which provides a hook for pci_device_add().

Rename pcibios_add_device() to pcibios_device_add() so it matches
pci_device_add().

Also, remove the export of the microblaze version. The only caller must be
compiled as a built-in so there's no reason for the export.

Link: https://lore.kernel.org/r/20210913152709.48013-1-oohall@gmail.com
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Niklas Schnelle <schnelle@linux.ibm.com>	# s390
2021-09-21 15:26:09 -05:00
Bjorn Helgaas a1e4ca8eb9 Merge branch 'remotes/lorenzo/pci/hyper-v'
- Add domain_nr in struct pci_host_bridge (Boqun Feng)

- Use host bridge MSI domain for root buses if present (Boqun Feng)

- Allow ARM64 virtual host bridge with no ACPI companion (e.g., Hyper-V)
  (Boqun Feng)

- Make Hyper-V enumeration more generic (Arnd Bergmann)

- Set Hyper-V domain_nr at probe-time (Boqun Feng)

- Set up Hyper-V MSI domain at bridge probe-time (Boqun Feng)

- Enable Hyper-V bridge probing on ARM64 (Boqun Feng)

* remotes/lorenzo/pci/hyper-v:
  PCI: hv: Turn on the host bridge probing on ARM64
  PCI: hv: Set up MSI domain at bridge probing time
  PCI: hv: Set ->domain_nr of pci_host_bridge at probing time
  PCI: hv: Generify PCI probing
  arm64: PCI: Support root bridge preparation for Hyper-V
  arm64: PCI: Restructure pcibios_root_bridge_prepare()
  PCI: Support populating MSI domains of root buses via bridges
  PCI: Introduce domain_nr in pci_host_bridge
2021-09-02 14:56:47 -05:00
Bjorn Helgaas 74797618e2 Merge branch 'pci/vpd'
- Check Resource Item Names against those defined for type (Bjorn Helgaas)

- Treat initial 0xff as missing EEPROM (Heiner Kallweit)

- Reject resource tags with invalid size (Bjorn Helgaas)

- Don't check Large Resource Item Names for validity (Bjorn Helgaas)

- Allow access to valid parts of VPD if some is invalid (Bjorn Helgaas)

- Remove pci_vpd_size() old_size argument (Heiner Kallweit)

- Make pci_vpd_wait() uninterruptible (Heiner Kallweit)

- Remove struct pci_vpd.flag (Heiner Kallweit)

- Remove struct pci_vpd_ops (Heiner Kallweit)

- Remove struct pci_vpd.valid member (Heiner Kallweit)

- Embed struct pci_vpd in struct pci_dev (Heiner Kallweit)

- Determine VPD size in pci_vpd_init() (Heiner Kallweit)

- Treat invalid VPD like missing VPD capability (Heiner Kallweit)

- Add pci_vpd_alloc() to allocate buffer and read VPD into it (Heiner
  Kallweit)

- Add pci_vpd_find_ro_info_keyword() (Heiner Kallweit)

- Add pci_vpd_check_csum() (Heiner Kallweit)

- Add pci_vpd_find_id_string() (Heiner Kallweit)

- Read VPD with pci_vpd_alloc() (bnx2x, bnxt, sfc, sfc falcon, tg3 drivers)
  (Heiner Kallweit)

- Search VPD with pci_vpd_find_ro_info_keyword() (bnx2, bnx2x, bnxt, cxgb4,
  cxlflash SCSI, sfc, sfc falcon, tg3 drivers) (Heiner Kallweit)

- Search VPD with pci_vpd_find_id_string() (cxgb4 driver) (Heiner Kallweit)

- Validate VPD checksum with pci_vpd_check_csum() (cxgb4, tg3 drivers)
  (Heiner Kallweit)

- Replace open-coded byte swapping with swab32s() in bnx2 (Heiner Kallweit)

- Remove unused vpd_param member ec (Heiner Kallweit)

- Stop exporting pci_vpd_find_tag(), pci_vpd_find_info_keyword() (Heiner
  Kallweit)

- Move several VPD defines and inlines to internal PCI core (Heiner
  Kallweit)

* pci/vpd:
  PCI/VPD: Use unaligned access helpers
  PCI/VPD: Clean up public VPD defines and inline functions
  cxgb4: Use pci_vpd_find_id_string() to find VPD ID string
  PCI/VPD: Add pci_vpd_find_id_string()
  PCI/VPD: Include post-processing in pci_vpd_find_tag()
  PCI/VPD: Stop exporting pci_vpd_find_info_keyword()
  PCI/VPD: Stop exporting pci_vpd_find_tag()
  scsi: cxlflash: Search VPD with pci_vpd_find_ro_info_keyword()
  cxgb4: Search VPD with pci_vpd_find_ro_info_keyword()
  cxgb4: Remove unused vpd_param member ec
  cxgb4: Validate VPD checksum with pci_vpd_check_csum()
  bnxt: Search VPD with pci_vpd_find_ro_info_keyword()
  bnxt: Read VPD with pci_vpd_alloc()
  bnx2x: Search VPD with pci_vpd_find_ro_info_keyword()
  bnx2x: Read VPD with pci_vpd_alloc()
  bnx2: Replace open-coded byte swapping with swab32s()
  bnx2: Search VPD with pci_vpd_find_ro_info_keyword()
  sfc: falcon: Search VPD with pci_vpd_find_ro_info_keyword()
  sfc: falcon: Read VPD with pci_vpd_alloc()
  tg3: Search VPD with pci_vpd_find_ro_info_keyword()
  tg3: Validate VPD checksum with pci_vpd_check_csum()
  tg3: Read VPD with pci_vpd_alloc()
  sfc: Search VPD with pci_vpd_find_ro_info_keyword()
  sfc: Read VPD with pci_vpd_alloc()
  PCI/VPD: Add pci_vpd_check_csum()
  PCI/VPD: Add pci_vpd_find_ro_info_keyword()
  PCI/VPD: Add pci_vpd_alloc()
  PCI/VPD: Treat invalid VPD like missing VPD capability
  PCI/VPD: Determine VPD size in pci_vpd_init()
  PCI/VPD: Embed struct pci_vpd in struct pci_dev
  PCI/VPD: Remove struct pci_vpd.valid member
  PCI/VPD: Remove struct pci_vpd_ops
  PCI/VPD: Reorder pci_read_vpd(), pci_write_vpd()
  PCI/VPD: Remove struct pci_vpd.flag
  PCI/VPD: Make pci_vpd_wait() uninterruptible
  PCI/VPD: Remove pci_vpd_size() old_size argument
  PCI/VPD: Allow access to valid parts of VPD if some is invalid
  PCI/VPD: Don't check Large Resource Item Names for validity
  PCI/VPD: Reject resource tags with invalid size
  PCI/VPD: Treat initial 0xff as missing EEPROM
  PCI/VPD: Check Resource Item Names against those valid for type
  PCI/VPD: Correct diagnostic for VPD read failure
2021-09-02 14:56:44 -05:00
Boqun Feng 41dd40fd71 PCI: Support populating MSI domains of root buses via bridges
Currently, at probing time, the MSI domains of root buses are populated
if either the information of MSI domain is available from firmware (DT
or ACPI), or arch-specific sysdata is used to pass the fwnode of the MSI
domain. These two conditions don't cover all, e.g. Hyper-V virtual PCI
on ARM64, which doesn't have the MSI information in the firmware and
couldn't use arch-specific sysdata because running on an architecture
with PCI_DOMAINS_GENERIC=y.

To support populating MSI domains of the root buses at the probing when
neither of the above condition is true, the ->msi_domain of the
corresponding bridge device is used: in pci_host_bridge_msi_domain(),
which should return the MSI domain of the root bus, the ->msi_domain of
the corresponding bridge is fetched first as a potential value of the
MSI domain of the root bus.

In order to use the approach to populate MSI domains, the driver needs
to dev_set_msi_domain() on the bridge before calling
pci_register_host_bridge(), and makes sure GENERIC_MSI_IRQ_DOMAIN=y.

Another advantage of this new approach is providing an arch-independent
way to populate MSI domains, which allows sharing the driver code as
much as possible between architectures.

Originally-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210726180657.142727-3-boqun.feng@gmail.com
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-23 10:59:26 +01:00
Boqun Feng 15d82ca23c PCI: Introduce domain_nr in pci_host_bridge
Currently we retrieve the PCI domain number of the host bridge from the
bus sysdata (or pci_config_window if PCI_DOMAINS_GENERIC=y). Actually
we have the information at PCI host bridge probing time, and it makes
sense that we store it into pci_host_bridge. One benefit of doing so is
the requirement for supporting PCI on Hyper-V for ARM64, because the
host bridge of Hyper-V doesn't have pci_config_window, whereas ARM64 is
a PCI_DOMAINS_GENERIC=y arch, so we cannot retrieve the PCI domain
number from pci_config_window on ARM64 Hyper-V guest.

As the preparation for ARM64 Hyper-V PCI support, we introduce the
domain_nr in pci_host_bridge and a sentinel value to allow drivers to
set domain numbers properly at probing time. Currently
CONFIG_PCI_DOMAINS_GENERIC=y archs are only users of this
newly-introduced field.

Link: https://lore.kernel.org/r/20210726180657.142727-2-boqun.feng@gmail.com
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-23 10:59:26 +01:00