Since veth is very likely to be enabled and there are some drivers
(e.g. mlx5) where CONFIG_PAGE_POOL_STATS is optional, make
CONFIG_PAGE_POOL_STATS optional for veth too in order to keep it
optional instead of required.
Suggested-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since veth_convert_skb_to_xdp_buff routine runs in veth_poll() NAPI,
rely on napi_build_skb() instead of build_skb() to reduce skb allocation
cost.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Link: https://lore.kernel.org/r/0f822c0b72f8b71555c11745cb8fb33399d02de9.1683578488.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce page_pool stats support to report info about local page_pool
through ethtool
Tested-by: Maryam Tahhan <mtahhan@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce page_pool support in veth driver in order to recycle pages
in veth_convert_skb_to_xdp_buff routine and avoid reallocating the skb
through the page allocator.
The patch has been tested sending tcp traffic to a veth pair where the
remote peer is running a simple xdp program just returning xdp_pass:
veth upstream codebase:
MTU 1500B: ~ 8Gbps
MTU 8000B: ~ 13.9Gbps
veth upstream codebase + pp support:
MTU 1500B: ~ 9.2Gbps
MTU 8000B: ~ 16.2Gbps
Tested-by: Maryam Tahhan <mtahhan@redhat.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For veth pairs, NETDEV_XDP_ACT_NDO_XMIT is supported by the current
device if the peer one is running a XDP program or if it has GRO enabled.
Fix the xdp_features flags reporting considering peer device and not
current one for NETDEV_XDP_ACT_NDO_XMIT.
Fixes: fccca038f3 ("veth: take into account device reconfiguration for xdp_features flag")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/4f1ca6f6f6b42ae125bfdb5c7782217c83968b2e.1681767806.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Update API for bpf_xdp_metadata_rx_hash() with arg for xdp rss hash type.
The veth driver currently only support XDP-hints based on SKB code path.
The SKB have lost information about the RSS hash type, by compressing
the information down to a single bitfield skb->l4_hash, that only knows
if this was a L4 hash value.
In preparation for veth, the xdp_rss_hash_type have an L4 indication
bit that allow us to return a meaningful L4 indication when working
with SKB based packets.
Fixes: 306531f024 ("veth: Support RX XDP metadata")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/168132893055.340624.16209448340644513469.stgit@firesoul
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The RSS hash type specifies what portion of packet data NIC hardware used
when calculating RSS hash value. The RSS types are focused on Internet
traffic protocols at OSI layers L3 and L4. L2 (e.g. ARP) often get hash
value zero and no RSS type. For L3 focused on IPv4 vs. IPv6, and L4
primarily TCP vs UDP, but some hardware supports SCTP.
Hardware RSS types are differently encoded for each hardware NIC. Most
hardware represent RSS hash type as a number. Determining L3 vs L4 often
requires a mapping table as there often isn't a pattern or sorting
according to ISO layer.
The patch introduce a XDP RSS hash type (enum xdp_rss_hash_type) that
contains both BITs for the L3/L4 types, and combinations to be used by
drivers for their mapping tables. The enum xdp_rss_type_bits get exposed
to BPF via BTF, and it is up to the BPF-programmer to match using these
defines.
This proposal change the kfunc API bpf_xdp_metadata_rx_hash() adding
a pointer value argument for provide the RSS hash type.
Change signature for all xmo_rx_hash calls in drivers to make it compile.
The RSS type implementations for each driver comes as separate patches.
Fixes: 3d76a4d3d4 ("bpf: XDP metadata RX kfuncs")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/168132892042.340624.582563003880565460.stgit@firesoul
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZBzSGQAKCRDbK58LschI
g+dhAP95enbrlwaQ+9aoqrU+GqCq+uo4SkaqnUtq6GSvRNiVBQD8C6iZxrAjyXnm
1wRr3JN/HszPBzgjl3HvDc9y69I/PAI=
=8JwR
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-03-23
We've added 8 non-merge commits during the last 13 day(s) which contain
a total of 21 files changed, 238 insertions(+), 161 deletions(-).
The main changes are:
1) Fix verification issues in some BPF programs due to their stack usage
patterns, from Eduard Zingerman.
2) Fix to add missing overflow checks in xdp_umem_reg and return an error
in such case, from Kal Conley.
3) Fix and undo poisoning of strlcpy in libbpf given it broke builds for
libcs which provided the former like uClibc-ng, from Jesus Sanchez-Palencia.
4) Fix insufficient bpf_jit_limit default to avoid users running into hard
to debug seccomp BPF errors, from Daniel Borkmann.
5) Fix driver return code when they don't support a bpf_xdp_metadata kfunc
to make it unambiguous from other errors, from Jesper Dangaard Brouer.
6) Two BPF selftest fixes to address compilation errors from recent changes
in kernel structures, from Alexei Starovoitov.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
xdp: bpf_xdp_metadata use EOPNOTSUPP for no driver support
bpf: Adjust insufficient default bpf_jit_limit
xsk: Add missing overflow check in xdp_umem_reg
selftests/bpf: Fix progs/test_deny_namespace.c issues.
selftests/bpf: Fix progs/find_vma_fail1.c build error.
libbpf: Revert poisoning of strlcpy
selftests/bpf: Tests for uninitialized stack reads
bpf: Allow reads from uninit stack
====================
Link: https://lore.kernel.org/r/20230323225221.6082-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When driver doesn't implement a bpf_xdp_metadata kfunc the fallback
implementation returns EOPNOTSUPP, which indicate device driver doesn't
implement this kfunc.
Currently many drivers also return EOPNOTSUPP when the hint isn't
available, which is ambiguous from an API point of view. Instead
change drivers to return ENODATA in these cases.
There can be natural cases why a driver doesn't provide any hardware
info for a specific hint, even on a frame to frame basis (e.g. PTP).
Lets keep these cases as separate return codes.
When describing the return values, adjust the function kernel-doc layout
to get proper rendering for the return values.
Fixes: ab46182d0d ("net/mlx4_en: Support RX XDP metadata")
Fixes: bc8d405b1b ("net/mlx5e: Support RX XDP metadata")
Fixes: 306531f024 ("veth: Support RX XDP metadata")
Fixes: 3d76a4d3d4 ("bpf: XDP metadata RX kfuncs")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/167940675120.2718408.8176058626864184420.stgit@firesoul
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Take into account tx/rx queues reconfiguration setting device
xdp_features flag. Moreover consider NETIF_F_GRO flag in order to enable
ndo_xdp_xmit callback.
Fixes: 66c0e13ad2 ("drivers: net: turn on XDP features")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A summary of the flags being set for various drivers is given below.
Note that XDP_F_REDIRECT_TARGET and XDP_F_FRAG_TARGET are features
that can be turned off and on at runtime. This means that these flags
may be set and unset under RTNL lock protection by the driver. Hence,
READ_ONCE must be used by code loading the flag value.
Also, these flags are not used for synchronization against the availability
of XDP resources on a device. It is merely a hint, and hence the read
may race with the actual teardown of XDP resources on the device. This
may change in the future, e.g. operations taking a reference on the XDP
resources of the driver, and in turn inhibiting turning off this flag.
However, for now, it can only be used as a hint to check whether device
supports becoming a redirection target.
Turn 'hw-offload' feature flag on for:
- netronome (nfp)
- netdevsim.
Turn 'native' and 'zerocopy' features flags on for:
- intel (i40e, ice, ixgbe, igc)
- mellanox (mlx5).
- stmmac
- netronome (nfp)
Turn 'native' features flags on for:
- amazon (ena)
- broadcom (bnxt)
- freescale (dpaa, dpaa2, enetc)
- funeth
- intel (igb)
- marvell (mvneta, mvpp2, octeontx2)
- mellanox (mlx4)
- mtk_eth_soc
- qlogic (qede)
- sfc
- socionext (netsec)
- ti (cpsw)
- tap
- tsnep
- veth
- xen
- virtio_net.
Turn 'basic' (tx, pass, aborted and drop) features flags on for:
- netronome (nfp)
- cavium (thunder)
- hyperv.
Turn 'redirect_target' feature flag on for:
- amanzon (ena)
- broadcom (bnxt)
- freescale (dpaa, dpaa2)
- intel (i40e, ice, igb, ixgbe)
- ti (cpsw)
- marvell (mvneta, mvpp2)
- sfc
- socionext (netsec)
- qlogic (qede)
- mellanox (mlx5)
- tap
- veth
- virtio_net
- xen
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Co-developed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Marek Majtyka <alardam@gmail.com>
Link: https://lore.kernel.org/r/3eca9fafb308462f7edb1f58e451d59209aa07eb.1675245258.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The goal is to enable end-to-end testing of the metadata for AF_XDP.
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Anatoly Burakov <anatoly.burakov@intel.com>
Cc: Alexander Lobakin <alexandr.lobakin@intel.com>
Cc: Magnus Karlsson <magnus.karlsson@gmail.com>
Cc: Maryam Tahhan <mtahhan@redhat.com>
Cc: xdp-hints@xdp-project.net
Cc: netdev@vger.kernel.org
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230119221536.3349901-11-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
No functional changes. Boilerplate to allow stuffing more data after xdp_buff.
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Anatoly Burakov <anatoly.burakov@intel.com>
Cc: Alexander Lobakin <alexandr.lobakin@intel.com>
Cc: Magnus Karlsson <magnus.karlsson@gmail.com>
Cc: Maryam Tahhan <mtahhan@redhat.com>
Cc: xdp-hints@xdp-project.net
Cc: netdev@vger.kernel.org
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230119221536.3349901-10-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
When AF_XDP is used on on a veth interface the RX ring is updated in two
steps. veth_xdp_rcv() removes packet descriptors from the FILL ring
fills them and places them in the RX ring updating the cached_prod
pointer. Later xdp_do_flush() syncs the RX ring prod pointer with the
cached_prod pointer allowing user-space to see the recently filled in
descriptors. The rings are intended to be SPSC, however the existing
order in veth_poll allows the xdp_do_flush() to run concurrently with
another CPU creating a race condition that allows user-space to see old
or uninitialized descriptors in the RX ring. This bug has been observed
in production systems.
To summarize, we are expecting this ordering:
CPU 0 __xsk_rcv_zc()
CPU 0 __xsk_map_flush()
CPU 2 __xsk_rcv_zc()
CPU 2 __xsk_map_flush()
But we are seeing this order:
CPU 0 __xsk_rcv_zc()
CPU 2 __xsk_rcv_zc()
CPU 0 __xsk_map_flush()
CPU 2 __xsk_map_flush()
This occurs because we rely on NAPI to ensure that only one napi_poll
handler is running at a time for the given veth receive queue.
napi_schedule_prep() will prevent multiple instances from getting
scheduled. However calling napi_complete_done() signals that this
napi_poll is complete and allows subsequent calls to
napi_schedule_prep() and __napi_schedule() to succeed in scheduling a
concurrent napi_poll before the xdp_do_flush() has been called. For the
veth driver a concurrent call to napi_schedule_prep() and
__napi_schedule() can occur on a different CPU because the veth xmit
path can additionally schedule a napi_poll creating the race.
The fix as suggested by Magnus Karlsson, is to simply move the
xdp_do_flush() call before napi_complete_done(). This syncs the
producer ring pointers before another instance of napi_poll can be
scheduled on another CPU. It will also slightly improve performance by
moving the flush closer to when the descriptors were placed in the
RX ring.
Fixes: d1396004dd ("veth: Add XDP TX and REDIRECT")
Suggested-by: Magnus Karlsson <magnus.karlsson@gmail.com>
Signed-off-by: Shawn Bohrer <sbohrer@cloudflare.com>
Link: https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This reverts commit 2e0de6366a.
Based on the issues reported by John and Paolo and their comments,
this patch and the corresponding fix 5e5dc33d5d are reverted, and
we'll remake it.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 5e5dc33d5d.
This patch fixes the panic maked by 2e0de6366a. Now Paolo
and Toke suggest reverting the patch 2e0de6366a and making
it stronger, so do this first.
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The following panic is observed when bringing up (veth_open) a veth device
that has an XDP program attached.
[ 61.519185] kernel BUG at net/core/dev.c:6442!
[ 61.519456] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[ 61.519752] CPU: 0 PID: 408 Comm: ip Tainted: G W 6.1.0-rc2-185930-gd9095f92950b-dirty #26
[ 61.520288] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
[ 61.520806] RIP: 0010:napi_enable+0x3d/0x40
[ 61.521077] Code: f6 f6 80 61 08 00 00 02 74 0d 48 83 bf 88 01 00 00 00 74 03 80 cd 01 48 89 d0 f0 48 0f b1 4f 10 48 39 c2 75 c8 c3 cc cc cc cc <0f> 0b 90 48 8b 87 b0 00 00 00 48 81 c7 b0 00 00 00 45 31 c0 48 39
[ 61.522226] RSP: 0018:ffffbc9800cc36f8 EFLAGS: 00010246
[ 61.522557] RAX: 0000000000000001 RBX: 0000000000000300 RCX: 0000000000000001
[ 61.523004] RDX: 0000000000000010 RSI: ffffffff8b0de852 RDI: ffff9f03848e5000
[ 61.523452] RBP: 0000000000000000 R08: 0000000000000800 R09: 0000000000000000
[ 61.523899] R10: ffff9f0384a96800 R11: ffffffffffa48061 R12: ffff9f03849c3000
[ 61.524345] R13: 0000000000000300 R14: ffff9f03848e5000 R15: 0000001000000100
[ 61.524792] FS: 00007f58cb64d2c0(0000) GS:ffff9f03bbc00000(0000) knlGS:0000000000000000
[ 61.525301] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 61.525673] CR2: 00007f6cc629b498 CR3: 000000010498c000 CR4: 00000000000006f0
[ 61.526121] Call Trace:
[ 61.526284] <TASK>
[ 61.526425] __veth_napi_enable_range+0xd6/0x230
[ 61.526723] veth_enable_xdp+0xd0/0x160
[ 61.526969] veth_open+0x2e/0xc0
[ 61.527180] __dev_open+0xe2/0x1b0
[ 61.527405] __dev_change_flags+0x1a1/0x210
[ 61.527673] dev_change_flags+0x1c/0x60
This happens because we are calling veth_napi_enable() on already enabled
queues. The root cause is in commit 2e0de6366a changed the control logic
dropping this case,
if (priv->_xdp_prog) {
err = veth_enable_xdp(dev);
if (err)
return err;
- } else if (veth_gro_requested(dev)) {
+ /* refer to the logic in veth_xdp_set() */
+ if (!rtnl_dereference(peer_rq->napi)) {
+ err = veth_napi_enable(peer);
+ if (err)
+ return err;
+ }
so that now veth_napi_enable is called if the peer has not yet
initialiazed its peer_rq->napi. The issue is this will happen
even if the NIC is not up. Then in veth_enable_xdp just above
we have similar path,
veth_enable_xdp
napi_already_on = (dev->flags & IFF_UP) && rcu_access_pointer(rq->napi)
err = veth_enable_xdp_range(dev, 0, dev->real_num_rx_queues, napi_already_on);
The trouble is an xdp prog is assigned before bringing the device up each
of the veth_open path will enable the peers xdp napi structs. But then when
we bring the peer up it will similar try to enable again because from
veth_open the IFF_UP flag is not set until after the op in __dev_open so
we believe napi_alread_on = false.
To fix this just drop the IFF_UP test and rely on checking if the napi
struct is enabled. This also matches the peer check in veth_xdp for
disabling.
To reproduce run ./test_xdp_meta.sh I found adding Cilium/Tetragon tests
for XDP.
Fixes: 2e0de6366a ("veth: Avoid drop packets when xdp_redirect performs")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20221108221650.808950-2-john.fastabend@gmail.com
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
In the current processing logic, when xdp_redirect occurs, it transmits
the xdp frame based on napi.
If napi of the peer veth is not ready, the veth will drop the packets.
This doesn't meet our expectations.
In this context, we enable napi of the peer veth automatically when the
veth loads the xdp. Then if the veth unloads the xdp, we need to
correctly judge whether to disable napi of the peer veth, because the peer
veth may have loaded xdp, or even the user has enabled GRO.
Signed-off-by: Heng Qi <henqqi@linux.alibaba.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch pass netlink message header and portid to rtnl_configure_link()
All the functions in this call chain need to add the parameters so we can
use them in the last call rtnl_notify(), and notify the userspace about
the new link info if NLM_F_ECHO flag is set.
- rtnl_configure_link()
- __dev_notify_flags()
- rtmsg_ifinfo()
- rtmsg_ifinfo_event()
- rtmsg_ifinfo_build_skb()
- rtmsg_ifinfo_send()
- rtnl_notify()
Also move __dev_notify_flags() declaration to net/core/dev.h, as Jakub
suggested.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the 32bit UP oddity is gone and 32bit uses always a sequence
count, there is no need for the fetch_irq() variants anymore.
Convert to the regular interface.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We tell driver developers to always pass NAPI_POLL_WEIGHT
as the weight to netif_napi_add(). This may be confusing
to newcomers, drop the weight argument, those who really
need to tweak the weight can use netif_napi_add_weight().
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN
Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit e66e257a5d. The veth
driver no longer needs these hacks which are slightly detrimential to
the fast path performance, because the bonding driver is keeping track
of TX times of ARP and NS probes by itself, which it should.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 21a75f0915 ("bonding: Fix ARP monitor validation"),
the bonding ARP / ND link monitors depend on the trans_start time to
determine link availability. NETIF_F_LLTX drivers must update trans_start
directly, which veth does not do. This prevents use of the ARP or ND link
monitors with veth interfaces in a bond.
Resolve this by having veth_xmit update the trans_start time.
Reported-by: Jonathan Toppins <jtoppins@redhat.com>
Tested-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Fixes: 21a75f0915 ("bonding: Fix ARP monitor validation")
Link: https://lore.kernel.org/netdev/b2fd4147-8f50-bebd-963a-1a3e8d1d9715@redhat.com/
Signed-off-by: David S. Miller <davem@davemloft.net>
Set the TSO driver limit to GSO_MAX_SIZE (512 KB).
This allows the admin/user to set a GSO limit up to this value.
ip link set dev veth10 gso_max_size 200000
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To make later patches smaller create a helper for inheriting
the TSO limitations of a lower device. The TSO in the name
is not an accident, subsequent patches will replace GSO
with TSO in more names.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
veth netdevice defines own rx queues and allocates array containing
up to 4095 ~750-bytes-long 'struct veth_rq' elements. Such allocation
is quite huge and should be accounted to memcg.
Signed-off-by: Vasily Averin <vvs@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
After feeding a decapsulated packet to a veth device with act_mirred,
skb_headlen() may be 0. But veth_xmit() calls __dev_forward_skb(),
which expects at least ETH_HLEN byte of linear data (as
__dev_forward_skb2() calls eth_type_trans(), which pulls ETH_HLEN bytes
unconditionally).
Use pskb_may_pull() to ensure veth_xmit() respects this constraint.
kernel BUG at include/linux/skbuff.h:2328!
RIP: 0010:eth_type_trans+0xcf/0x140
Call Trace:
<IRQ>
__dev_forward_skb2+0xe3/0x160
veth_xmit+0x6e/0x250 [veth]
dev_hard_start_xmit+0xc7/0x200
__dev_queue_xmit+0x47f/0x520
? skb_ensure_writable+0x85/0xa0
? skb_mpls_pop+0x98/0x1c0
tcf_mirred_act+0x442/0x47e [act_mirred]
tcf_action_exec+0x86/0x140
fl_classify+0x1d8/0x1e0 [cls_flower]
? dma_pte_clear_level+0x129/0x1a0
? dma_pte_clear_level+0x129/0x1a0
? prb_fill_curr_block+0x2f/0xc0
? skb_copy_bits+0x11a/0x220
__tcf_classify+0x58/0x110
tcf_classify_ingress+0x6b/0x140
__netif_receive_skb_core.constprop.0+0x47d/0xfd0
? __iommu_dma_unmap_swiotlb+0x44/0x90
__netif_receive_skb_one_core+0x3d/0xa0
netif_receive_skb+0x116/0x170
be_process_rx+0x22f/0x330 [be2net]
be_poll+0x13c/0x370 [be2net]
__napi_poll+0x2a/0x170
net_rx_action+0x22f/0x2f0
__do_softirq+0xca/0x2a8
__irq_exit_rcu+0xc1/0xe0
common_interrupt+0x83/0xa0
Fixes: e314dbdc1c ("[NET]: Virtual ethernet device driver.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow increasing the MTU over page boundaries on veth devices
if the attached xdp program declares to support xdp fragments.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/d5dc039c3d4123426e7023a488c449181a7bc57f.1646989407.git.lorenzo@kernel.org
Introduce veth_convert_skb_to_xdp_buff routine in order to
convert a non-linear skb into a xdp buffer. If the received skb
is cloned or shared, veth_convert_skb_to_xdp_buff will copy it
in a new skb composed by order-0 pages for the linear and the
fragmented area. Moreover veth_convert_skb_to_xdp_buff guarantees
we have enough headroom for xdp.
This is a preliminary patch to allow attaching xdp programs with frags
support on veth devices.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/8d228b106bc1903571afd1d77e797bffe9a5ea7c.1646989407.git.lorenzo@kernel.org
Even if this is a theoretical issue since it is not possible to perform
XDP_REDIRECT on a non-linear xdp_frame, veth driver does not account
paged area in ndo_xdp_xmit function pointer.
Introduce xdp_get_frame_len utility routine to get the xdp_frame full
length and account total frame size running XDP_REDIRECT of a
non-linear xdp frame into a veth device.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Hoiland-Jorgensen <toke@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/54f9fd3bb65d190daf2c0bbae2f852ff16cfbaa0.1646989407.git.lorenzo@kernel.org
Dave suggested a while ago (eleven years by now) "Let's make netif_rx()
work in all contexts and get rid of netif_rx_ni()". Eric agreed and
pointed out that modern devices should use netif_receive_skb() to avoid
the overhead.
In the meantime someone added another variant, netif_rx_any_context(),
which behaves as suggested.
netif_rx() must be invoked with disabled bottom halves to ensure that
pending softirqs, which were raised within the function, are handled.
netif_rx_ni() can be invoked only from process context (bottom halves
must be enabled) because the function handles pending softirqs without
checking if bottom halves were disabled or not.
netif_rx_any_context() invokes on the former functions by checking
in_interrupts().
netif_rx() could be taught to handle both cases (disabled and enabled
bottom halves) by simply disabling bottom halves while invoking
netif_rx_internal(). The local_bh_enable() invocation will then invoke
pending softirqs only if the BH-disable counter drops to zero.
Eric is concerned about the overhead of BH-disable+enable especially in
regard to the loopback driver. As critical as this driver is, it will
receive a shortcut to avoid the additional overhead which is not needed.
Add a local_bh_disable() section in netif_rx() to ensure softirqs are
handled if needed.
Provide __netif_rx() which does not disable BH and has a lockdep assert
to ensure that interrupts are disabled. Use this shortcut in the
loopback driver and in drivers/net/*.c.
Make netif_rx_ni() and netif_rx_any_context() invoke netif_rx() so they
can be removed once they are no more users left.
Link: https://lkml.kernel.org/r/20100415.020246.218622820.davem@davemloft.net
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Laurent reported that they have seen a significant amount of TCP retransmissions
at high throughput from applications residing in network namespaces talking to
the outside world via veths. The drops were seen on the qdisc layer (fq_codel,
as per systemd default) of the phys device such as ena or virtio_net due to all
traffic hitting a _single_ TX queue _despite_ multi-queue device. (Note that the
setup was _not_ using XDP on veths as the issue is generic.)
More specifically, after edbea92202 ("veth: Store queue_mapping independently
of XDP prog presence") which made it all the way back to v4.19.184+,
skb_record_rx_queue() would set skb->queue_mapping to 1 (given 1 RX and 1 TX
queue by default for veths) instead of leaving at 0.
This is eventually retained and callbacks like ena_select_queue() will also pick
single queue via netdev_core_pick_tx()'s ndo_select_queue() once all the traffic
is forwarded to that device via upper stack or other means. Similarly, for others
not implementing ndo_select_queue() if XPS is disabled, netdev_pick_tx() might
call into the skb_tx_hash() and check for prior skb_rx_queue_recorded() as well.
In general, it is a _bad_ idea for virtual devices like veth to mess around with
queue selection [by default]. Given dev->real_num_tx_queues is by default 1,
the skb->queue_mapping was left untouched, and so prior to edbea92202 the
netdev_core_pick_tx() could do its job upon __dev_queue_xmit() on the phys device.
Unbreak this and restore prior behavior by removing the skb_record_rx_queue()
from veth_xmit() altogether.
If the veth peer has an XDP program attached, then it would return the first RX
queue index in xdp_md->rx_queue_index (unless configured in non-default manner).
However, this is still better than breaking the generic case.
Fixes: edbea92202 ("veth: Store queue_mapping independently of XDP prog presence")
Fixes: 638264dc90 ("veth: Support per queue XDP ring")
Reported-by: Laurent Bernaille <laurent.bernaille@datadoghq.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Cc: Toshiaki Makita <toshiaki.makita1@gmail.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-12-30
The following pull-request contains BPF updates for your *net-next* tree.
We've added 72 non-merge commits during the last 20 day(s) which contain
a total of 223 files changed, 3510 insertions(+), 1591 deletions(-).
The main changes are:
1) Automatic setrlimit in libbpf when bpf is memcg's in the kernel, from Andrii.
2) Beautify and de-verbose verifier logs, from Christy.
3) Composable verifier types, from Hao.
4) bpf_strncmp helper, from Hou.
5) bpf.h header dependency cleanup, from Jakub.
6) get_func_[arg|ret|arg_cnt] helpers, from Jiri.
7) Sleepable local storage, from KP.
8) Extend kfunc with PTR_TO_CTX, PTR_TO_MEM argument support, from Kumar.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In non trivial scenarios, the action id alone is not sufficient to
identify the program causing the warning. Before the previous patch,
the generated stack-trace pointed out at least the involved device
driver.
Let's additionally include the program name and id, and the relevant
device name.
If the user needs additional infos, he can fetch them via a kernel
probe, leveraging the arguments added here.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/ddb96bb975cbfddb1546cf5da60e77d5100b533c.1638189075.git.pabeni@redhat.com
dev->gso_max_segs is written under RTNL protection, or when the device is
not yet visible, but is read locklessly.
Add netif_set_gso_max_segs() helper.
Add the READ_ONCE()/WRITE_ONCE() pairs, and use netif_set_gso_max_segs()
where we can to better document what is going on.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dev->gso_max_size is written under RTNL protection, or when the device is
not yet visible, but is read locklessly.
Add the READ_ONCE()/WRITE_ONCE() pairs, and use netif_set_gso_max_size()
where we can to better document what is going on.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Leveraging the previous patch we can now avoid orphaning the
skb in the veth gro path, allowing correct backpressure.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This allows easier XDP usage. The number of default active
queues is not changed: 1 RX and 1 TX so that this does
not introduce overhead on the datapath for queue selection.
v1 -> v2:
- drop the module parameter, force default to nr_possible_cpus - Toke
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change implements the set_channel() ethtool operation,
preserving the current defaults values and allowing up set
the number of queues in the range set ad device creation
time.
The update operation tries hard to leave the device in a
consistent status in case of errors.
RFC v1 -> RFC v2:
- don't flip device status on set_channel()
- roll-back the changes if possible on error - Jackub
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extract in simpler helpers the code to enable and disable a
range of xdp/napi instance, with the common property that
"disable" helpers can't fail.
Will be used by the next patch. No functional change intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
veth get_channel currently reports for channels being both RX/TX and
combined. As Jakub noted:
"""
ethtool man page is relatively clear, unfortunately the kernel code
is not and few read the man page. A channel is approximately an IRQ,
not a queue, and IRQ can't be dedicated and combined simultaneously
"""
This patch changes the information exposed by veth_get_channels,
setting max_combined to zero, being more consistent with the above
statement. The ethtool_channels is always cleared by the caller, we just
need to avoid setting the 'combined' fields.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The recent patch that tied enabling of veth NAPI to the GRO flag also has
the nice side effect that a veth device can be the target of an
XDP_REDIRECT without an XDP program needing to be loaded on the peer
device. However, the patch adding this extra NAPI mode didn't actually
change the check in veth_xdp_xmit() to also look at the new NAPI pointer,
so let's fix that.
Fixes: 6788fa154546 ("veth: allow enabling NAPI even without XDP")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After the previous patch, when enabling GRO, locally generated
TCP traffic experiences some measurable overhead, as it traverses
the GRO engine without any chance of aggregation.
This change refine the NAPI receive path admission test, to avoid
unnecessary GRO overhead in most scenarios, when GRO is enabled
on a veth peer.
Only skbs that are eligible for aggregation enter the GRO layer,
the others will go through the traditional receive path.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenzo Bianconi