Fixes sparce warnings:
fs/notify/fanotify/fanotify_user.c:267:63: sparse:
warning: restricted fmode_t degrades to integer
fs/notify/fanotify/fanotify_user.c:1351:28: sparse:
warning: restricted fmode_t degrades to integer
FMODE_NONTIFY have bitwise fmode_t type and requires __force attribute
for any casts.
Signed-off-by: Vasily Averin <vvs@openvz.org>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/9adfd6ac-1b89-791e-796b-49ada3293985@openvz.org
Syzbot reported slab-out-of-bounds read in exfat_clear_bitmap.
This was triggered by reproducer calling truncute with size 0,
which causes the following trace:
BUG: KASAN: slab-out-of-bounds in exfat_clear_bitmap+0x147/0x490 fs/exfat/balloc.c:174
Read of size 8 at addr ffff888115aa9508 by task syz-executor251/365
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack_lvl+0x1e2/0x24b lib/dump_stack.c:118
print_address_description+0x81/0x3c0 mm/kasan/report.c:233
__kasan_report mm/kasan/report.c:419 [inline]
kasan_report+0x1a4/0x1f0 mm/kasan/report.c:436
__asan_report_load8_noabort+0x14/0x20 mm/kasan/report_generic.c:309
exfat_clear_bitmap+0x147/0x490 fs/exfat/balloc.c:174
exfat_free_cluster+0x25a/0x4a0 fs/exfat/fatent.c:181
__exfat_truncate+0x99e/0xe00 fs/exfat/file.c:217
exfat_truncate+0x11b/0x4f0 fs/exfat/file.c:243
exfat_setattr+0xa03/0xd40 fs/exfat/file.c:339
notify_change+0xb76/0xe10 fs/attr.c:336
do_truncate+0x1ea/0x2d0 fs/open.c:65
Move the is_valid_cluster() helper from fatent.c to a common
header to make it reusable in other *.c files. And add is_valid_cluster()
to validate if cluster number is within valid range in exfat_clear_bitmap()
and exfat_set_bitmap().
Link: https://syzkaller.appspot.com/bug?id=50381fc73821ecae743b8cf24b4c9a04776f767c
Reported-by: syzbot+a4087e40b9c13aad7892@syzkaller.appspotmail.com
Fixes: 1e49a94cf7 ("exfat: add bitmap operations")
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
If 'dirsync' is enabled, when zeroing a cluster, submitting
sector by sector will generate many block requests, will
cause the block device to not fully perform its performance.
This commit makes the sectors in a cluster to be submitted in
once, it will reduce the number of block requests. This will
make the block device to give full play to its performance.
Test create 1000 directories on SD card with:
$ time (for ((i=0;i<1000;i++)); do mkdir dir${i}; done)
Performance has been improved by more than 73% on imx6q-sabrelite.
Cluster size Before After Improvement
64 KBytes 3m34.036s 0m56.052s 73.8%
128 KBytes 6m2.644s 1m13.354s 79.8%
256 KBytes 11m22.202s 1m39.451s 85.4%
imx6q-sabrelite:
- CPU: 792 MHz x4
- Memory: 1GB DDR3
- SD Card: SanDisk 8GB Class 4
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
EXFAT_TZ_VALID bit in {create,modify,access}_tz is corresponding to
OffsetValid field in exfat specification [1]. When this bit isn't
set, timestamps should be treated as having the same UTC offset as
the current local time.
Currently, there is an option 'time_offset' for users to specify the
UTC offset for this issue. This patch introduces a new mount option
'sys_tz' to use system timezone as time offset.
Link: [1] https://docs.microsoft.com/en-us/windows/win32/fileio/exfat-specification#74102-offsetvalid-field
Signed-off-by: Chung-Chiang Cheng <cccheng@synology.com>
Acked-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
During renaming, the parent directory information maybe
updated. But the file/directory still references to the
old parent directory information.
This bug will cause 2 problems.
(1) The renamed file can not be written.
[10768.175172] exFAT-fs (sda1): error, failed to bmap (inode : 7afd50e4 iblock : 0, err : -5)
[10768.184285] exFAT-fs (sda1): Filesystem has been set read-only
ash: write error: Input/output error
(2) Some dentries of the renamed file/directory are not set
to deleted after removing the file/directory.
exfat_update_parent_info() is a workaround for the wrong parent
directory information being used after renaming. Now that bug is
fixed, this is no longer needed, so remove it.
Fixes: 5f2aa07507 ("exfat: add inode operations")
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Daniel Palmer <daniel.palmer@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
While running xfs/297 and generic/642, I noticed a crash in
xfs_attri_item_relog when it tries to copy the attr name to the new
xattri log item. I think what happened here was that we called
->iop_commit on the old attri item (which nulls out the pointers) as
part of a log force at the same time that a chained attr operation was
ongoing. The system was busy enough that at some later point, the defer
ops operation decided it was necessary to relog the attri log item, but
as we've detached the name buffer from the old attri log item, we can't
copy it to the new one, and kaboom.
I think there's a broader refcounting problem with LARP mode -- the
setxattr code can return to userspace before the CIL actually formats
and commits the log item, which results in a UAF bug. Therefore, the
xattr log item needs to be able to retain a reference to the name and
value buffers until the log items have completely cleared the log.
Furthermore, each time we create an intent log item, we allocate new
memory and (re)copy the contents; sharing here would be very useful.
Solve the UAF and the unnecessary memory allocations by having the log
code create a single refcounted buffer to contain the name and value
contents. This buffer can be passed from old to new during a relog
operation, and the logging code can (optionally) attach it to the
xfs_attr_item for reuse when LARP mode is enabled.
This also fixes a problem where the xfs_attri_log_item objects weren't
being freed back to the same cache where they came from.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
V4 superblocks do not contain the log_incompat feature bit, which means
that we cannot protect xattr log items against kernels that are too old
to know how to recover them. Turn off the log items for such
filesystems and adjust the "delayed" name to reflect what it's really
controlling.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
If a client's address changes, say if it is NAT'd, this can disrupt an in
progress operation. For most operations, this is not much of a problem,
but StoreData can be different as some servers modify the target file as
the data comes in, so if a store request is disrupted, the file can get
corrupted on the server.
The problem is that the server doesn't recognise packets that come after
the change of address as belonging to the original client and will bounce
them, either by sending an OUT_OF_SEQUENCE ACK to the apparent new call if
the packet number falls within the initial sequence number window of a call
or by sending an EXCEEDS_WINDOW ACK if it falls outside and then aborting
it. In both cases, firstPacket will be 1 and previousPacket will be 0 in
the ACK information.
Fix this by the following means:
(1) If a client call receives an EXCEEDS_WINDOW ACK with firstPacket as 1
and previousPacket as 0, assume this indicates that the server saw the
incoming packets from a different peer and thus as a different call.
Fail the call with error -ENETRESET.
(2) Also fail the call if a similar OUT_OF_SEQUENCE ACK occurs if the
first packet has been hard-ACK'd. If it hasn't been hard-ACK'd, the
ACK packet will cause it to get retransmitted, so the call will just
be repeated.
(3) Make afs_select_fileserver() treat -ENETRESET as a straight fail of
the operation.
(4) Prioritise the error code over things like -ECONNRESET as the server
did actually respond.
(5) Make writeback treat -ENETRESET as a retryable error and make it
redirty all the pages involved in a write so that the VM will retry.
Note that there is still a circumstance that I can't easily deal with: if
the operation is fully received and processed by the server, but the reply
is lost due to address change. There's no way to know if the op happened.
We can examine the server, but a conflicting change could have been made by
a third party - and we can't tell the difference. In such a case, a
message like:
kAFS: vnode modified {100058:146266} b7->b8 YFS.StoreData64 (op=2646a)
will be logged to dmesg on the next op to touch the file and the client
will reset the inode state, including invalidating clean parts of the
pagecache.
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Link: http://lists.infradead.org/pipermail/linux-afs/2021-December/004811.html # v1
Signed-off-by: David S. Miller <davem@davemloft.net>
The RX_USER_ABORT code should really only be used to indicate that the user
of the rxrpc service (ie. userspace) implicitly caused a call to be aborted
- for instance if the AF_RXRPC socket is closed whilst the call was in
progress. (The user may also explicitly abort a call and specify the abort
code to use).
Change some of the points of generation to use other abort codes instead:
(1) Abort the call with RXGEN_SS_UNMARSHAL or RXGEN_CC_UNMARSHAL if we see
ENOMEM and EFAULT during received data delivery and abort with
RX_CALL_DEAD in the default case.
(2) Abort with RXGEN_SS_MARSHAL if we get ENOMEM whilst trying to send a
reply.
(3) Abort with RX_CALL_DEAD if we stop hearing from the peer if we had
heard from the peer and abort with RX_CALL_TIMEOUT if we hadn't.
(4) Abort with RX_CALL_DEAD if we try to disconnect a call that's not
completed successfully or been aborted.
Reported-by: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: David S. Miller <davem@davemloft.net>
There's a locking issue with the per-netns list of calls in rxrpc. The
pieces of code that add and remove a call from the list use write_lock()
and the calls procfile uses read_lock() to access it. However, the timer
callback function may trigger a removal by trying to queue a call for
processing and finding that it's already queued - at which point it has a
spare refcount that it has to do something with. Unfortunately, if it puts
the call and this reduces the refcount to 0, the call will be removed from
the list. Unfortunately, since the _bh variants of the locking functions
aren't used, this can deadlock.
================================
WARNING: inconsistent lock state
5.18.0-rc3-build4+ #10 Not tainted
--------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
ksoftirqd/2/25 [HC0[0]:SC1[1]:HE1:SE0] takes:
ffff888107ac4038 (&rxnet->call_lock){+.?.}-{2:2}, at: rxrpc_put_call+0x103/0x14b
{SOFTIRQ-ON-W} state was registered at:
...
Possible unsafe locking scenario:
CPU0
----
lock(&rxnet->call_lock);
<Interrupt>
lock(&rxnet->call_lock);
*** DEADLOCK ***
1 lock held by ksoftirqd/2/25:
#0: ffff8881008ffdb0 ((&call->timer)){+.-.}-{0:0}, at: call_timer_fn+0x5/0x23d
Changes
=======
ver #2)
- Changed to using list_next_rcu() rather than rcu_dereference() directly.
Fixes: 17926a7932 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: David S. Miller <davem@davemloft.net>
If a callback break occurs (change notification), afs_getattr() needs to
issue an FS.FetchStatus RPC operation to update the status of the file
being examined by the stat-family of system calls.
Fix afs_getattr() to do this if AFS_VNODE_CB_PROMISED has been cleared
on a vnode by a callback break. Skip this if AT_STATX_DONT_SYNC is set.
This can be tested by appending to a file on one AFS client and then
using "stat -L" to examine its length on a machine running kafs. This
can also be watched through tracing on the kafs machine. The callback
break is seen:
kworker/1:1-46 [001] ..... 978.910812: afs_cb_call: c=0000005f YFSCB.CallBack
kworker/1:1-46 [001] ...1. 978.910829: afs_cb_break: 100058:23b4c:242d2c2 b=2 s=1 break-cb
kworker/1:1-46 [001] ..... 978.911062: afs_call_done: c=0000005f ret=0 ab=0 [0000000082994ead]
And then the stat command generated no traffic if unpatched, but with
this change a call to fetch the status can be observed:
stat-4471 [000] ..... 986.744122: afs_make_fs_call: c=000000ab 100058:023b4c:242d2c2 YFS.FetchStatus
stat-4471 [000] ..... 986.745578: afs_call_done: c=000000ab ret=0 ab=0 [0000000087fc8c84]
Fixes: 08e0e7c82e ("[AF_RXRPC]: Make the in-kernel AFS filesystem use AF_RXRPC.")
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
Tested-by: kafs-testing+fedora34_64checkkafs-build-496@auristor.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216010
Link: https://lore.kernel.org/r/165308359800.162686.14122417881564420962.stgit@warthog.procyon.org.uk/ # v1
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Clean up the following includecheck warning:
./fs/xfs/xfs_attr_item.c: xfs_inode.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Retry unaligned DIO with exclusive blocking semantics only when the
IOCB_NOWAIT flag is not set. If we are doing nonblocking user I/O,
propagate the error directly.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Remove tht entire xlog_recover_check_summary() function, this entire
function is dead code and has been for 12 years.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Everywhere else in XFS, structures that capture the state of an ongoing
deferred work item all have names that end with "_intent". The new
extended attribute deferred work items are not named as such, so fix it
to follow the naming convention used elsewhere.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The state variable is now a local variable pointing to a heap
allocation, so we don't need to zero-initialize it, nor do we need the
conditional to decide if we should free it.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Initialize and destroy the xattr log item caches in the same places that
we do all the other log item caches.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Nobody uses this field, so get rid of it and the unused flag definition.
Rearrange the structure layout to reduce its size from 104 to 96 bytes.
This gets us from 39 to 42 objects per page.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Create a separate slab cache for struct xfs_attr_item objects, since we
can pack the (104-byte) intent items more tightly than we can with the
general slab cache objects. On x86, this means 39 intents per memory
page instead of 32.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The flags that are stored in the extended attr intent log item really
should have a separate namespace from the rest of the XFS_ATTR_* flags.
Give them one to make it a little more obvious that they're intent item
flags.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The calling conventions of this function are a mess -- callers /can/
provide a pointer to a pointer to a state structure, but it's not
required, and as evidenced by the last two patches, the callers that do
weren't be careful enough about how to deal with an existing da state.
Push the allocation and freeing responsibilty to the callers, which
means that callers from the xattr node state machine steps now have the
visibility to allocate or free the da state structure as they please.
As a bonus, the node remove/add paths for larp-mode replaces can reset
the da state structure instead of freeing and immediately reallocating
it.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
In order to debug problems with server potentially
sending us an oplock that we don't recognize (or a race
with close and oplock break) it would be helpful to have
a dynamic trace point for this case. New tracepoint
is called trace_smb3_oplock_not_found
Signed-off-by: Steve French <stfrench@microsoft.com>
As filemap_check_errors() only report -EIO or -ENOSPC, we return more nuanced
writeback error -(file->f_mapping->wb_err & MAX_ERRNO).
filemap_write_and_wait
filemap_write_and_wait_range
filemap_check_errors
-ENOSPC or -EIO
filemap_check_wb_err
errseq_check
return -(file->f_mapping->wb_err & MAX_ERRNO)
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When trying to debug problems with server sending us a
lease we don't recognize, it would be helpful to have
a dynamic trace point for this case. New tracepoint
is called trace_smb3_lease_not_found
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steve French <stfrench@microsoft.com>
This patch move code for FS_IOC_GET_ENCRYPTION_PWSALT case into
ext4's crypto.c file, i.e. ext4_ioctl_get_encryption_pwsalt()
and uuid_is_zero(). This is mostly refactoring logic and should
not affect any functionality change.
Suggested-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/5af98b17152a96b245b4f7d2dfb8607fc93e36aa.1652595565.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Some of these functions when CONFIG_FS_ENCRYPTION is enabled are not
really inline (let compiler be the best judge of it).
Remove inline and move them into crypto.c where they should be present.
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/b7b9de2c7226298663fb5a0c28909135e2ab220f.1652595565.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This is to cleanup super.c file which has grown quite large.
So, start moving ext4 crypto related code to where it should
be in the first place i.e. fs/ext4/crypto.c
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/7d637e093cbc34d727397e8d41a53a1b9ca7d7a4.1652595565.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
outstanding credits must be initialized to 0,
because it means the sum of credits consumed by
in-flight requests.
And outstanding credits must be compared with
total credits in smb2_validate_credit_charge(),
because total credits are the sum of credits
granted by ksmbd.
This patch fix the following error,
while frametest with Windows clients:
Limits exceeding the maximum allowable outstanding requests,
given : 128, pending : 8065
Fixes: b589f5db6d ("ksmbd: limits exceeding the maximum allowable outstanding requests")
Cc: stable@vger.kernel.org
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Reported-by: Yufan Chen <wiz.chen@gmail.com>
Tested-by: Yufan Chen <wiz.chen@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When there are bursty connection requests,
RDMA connection event handler is deferred and
Negotiation requests are received even if
connection status is NEW.
To handle it, set the status to CONNECTED
if Negotiation requests are received.
Reported-by: Yufan Chen <wiz.chen@gmail.com>
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Tested-by: Yufan Chen <wiz.chen@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Remove some warnings found by running scripts/kernel-doc,
which is caused by using 'make W=1'.
fs/ksmbd/misc.c:30: warning: Function parameter or member 'str' not
described in 'match_pattern'
fs/ksmbd/misc.c:30: warning: Excess function parameter 'string'
description in 'match_pattern'
fs/ksmbd/misc.c:163: warning: Function parameter or member 'share' not
described in 'convert_to_nt_pathname'
fs/ksmbd/misc.c:163: warning: Function parameter or member 'path' not
described in 'convert_to_nt_pathname'
fs/ksmbd/misc.c:163: warning: Excess function parameter 'filename'
description in 'convert_to_nt_pathname'
fs/ksmbd/misc.c:163: warning: Excess function parameter 'sharepath'
description in 'convert_to_nt_pathname'
fs/ksmbd/misc.c:259: warning: Function parameter or member 'share' not
described in 'convert_to_unix_name'
fs/ksmbd/misc.c:259: warning: Function parameter or member 'name' not
described in 'convert_to_unix_name'
fs/ksmbd/misc.c:259: warning: Excess function parameter 'path'
description in 'convert_to_unix_name'
fs/ksmbd/misc.c:259: warning: Excess function parameter 'tid'
description in 'convert_to_unix_name'
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
smb-direct max read/write size can be different with smb2 max read/write
size. So smb2_read() can return error by wrong max read/write size check.
This patch use smb_direct_max_read_write_size for this check in
smb-direct read/write().
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add 'smbd max io size' parameter to adjust smbd-direct max read/write
size.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We found the issue that ksmbd return STATUS_NO_MORE_FILES response
even though there are still dentries that needs to be read while
file read/write test using framtest utils.
windows client send smb2 query dir request included
OutputBufferLength(128) that is too small to contain even one entry.
This patch make ksmbd immediately returns OutputBufferLength of response
as zero to client.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Make ksmbd handle multiple buffer descriptors
when reading and writing files using SMB direct:
Post the work requests of rdma_rw_ctx for
RDMA read/write in smb_direct_rdma_xmit(), and
the work request for the READ/WRITE response
with a remote invalidation in smb_direct_writev().
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Make get_sg_list return EINVAL if there aren't
mapped scatterlists.
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Because we don't have to tracking pending packets
by dividing these into packets with payload and
packets without payload, merge the tracking code.
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
SMB2_READ/SMB2_WRITE request has to be granted the number
of rw credits, the pages the request wants to transfer
/ the maximum pages which can be registered with one
MR to read and write a file.
And allocate enough RDMA resources for the maximum
number of rw credits allowed by ksmbd.
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Change the prototypes of RDMA read/write
operations to accept a pointer and length
of buffer descriptors.
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This enforces that we can only do this for directories and not normal files
or else the server will return an error.
This means that we will have conditionally check IF the path refers
to a directory or not in all the call-sites where we are unsure.
Right now this check is for "" i.e. root.
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Check protocol version in open_cached_dir() and return not supported
for SMB1. This allows us to call open_cached_dir() from code that
is common to both smb1 and smb2/3 in future patches without having to
do this check in the call-site.
At the same time, add a check if tcon is valid or not for the same reason.
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This only moves these definitions to come earlier in the file
but not change the definition itself.
This is done to reduce the amount of changes in future patches.
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Rather than pass in a bool for whether or not this work item needs to go
into the priority list or not, provide separate helpers for it. For most
use cases, this also then gets rid of the branch for non-priority task
work.
While at it, rename the prior_task_list to prio_task_list. Prior is
a confusing name for it, as it would seem to indicate that this is the
previous task_work list. prio makes it clear that this is a priority
task_work list.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Makes these debug messages easier to read
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
EEXIST didn't make sense to use when dfs_cache_find() couldn't find a
cache entry nor retrieve a referral target.
It also doesn't make sense cifs_dfs_query_info_nonascii_quirk() to
emulate ENOENT anymore.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Also return EOPNOTSUPP if path is remote but nodfs was set.
Fixes: a2809d0e16 ("cifs: quirk for STATUS_OBJECT_NAME_INVALID returned for non-ASCII dfs refs")
Cc: stable@vger.kernel.org
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
Its only caller always passes S_IFREG as the @type parameter. As an
additional clean-up, add a kerneldoc comment.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Now that its two callers have their own version-specific instance of
this function, do_nfsd_create() is no longer used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The NFSv3 CREATE and NFSv4 OPEN(CREATE) use cases are about to
diverge such that it makes sense to split do_nfsd_create() into one
version for NFSv3 and one for NFSv4.
As a first step, copy do_nfsd_create() to nfs3proc.c and remove
NFSv4-specific logic.
One immediate legibility benefit is that the logic for handling
NFSv3 createhow is now quite straightforward. NFSv4 createhow
has some subtleties that IMO do not belong in generic code.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
I'd like to move do_nfsd_create() out of vfs.c. Therefore
nfsd_create_setattr() needs to be made publicly visible.
Note that both call sites in vfs.c commit both the new object and
its parent directory, so just combine those common metadata commits
into nfsd_create_setattr().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up: The "out" label already invokes fh_drop_write().
Note that fh_drop_write() is already careful not to invoke
mnt_drop_write() if either it has already been done or there is
nothing to drop. Therefore no change in behavior is expected.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
As near as I can tell, mode bit masking and setting S_IFREG is
already done by do_nfsd_create() and vfs_create(). The NFSv4 path
(do_open_lookup), for example, does not bother with this special
processing.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Technically speaking, objects allocated out of a specific slab cache are
supposed to be freed to that slab cache. The popular slab backends will
take care of this for us, but SLOB famously doesn't. Fix this, even if
slob + xfs are not that common of a combination.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When we're validating a recovered xattr log item during log recovery, we
should check the name before starting to allocate resources. This isn't
strictly necessary on its own, but it means that we won't bother with
huge memory allocations during recovery if the attr name is garbage,
which will simplify the changes in the next patch.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Make sure we screen the "attr flags" field of recovered xattr intent log
items to reject flag bits that we don't know about. This is really the
attr *filter* field from xfs_da_args, so rename the field and create
a mask to make checking for invalid bits easier.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Make sure we screen the op flags field of recovered xattr intent log
items to reject flag bits that we don't know about.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
If a setxattr operation finds an xattr structure in leaf format, adding
the attr can fail due to lack of space and hence requires an upgrade to
node format. After this happens, we'll roll the transaction and
re-enter the state machine, at which time we need to perform a second
lookup of the attribute name to find its new location. This lookup
attaches a new da state structure to the xfs_attr_item but doesn't free
the old one (from the leaf lookup) and leaks it. Fix that.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
kmemleak reported that we lost an xfs_da_state while removing xattrs in
generic/020:
unreferenced object 0xffff88801c0e4b40 (size 480):
comm "attr", pid 30515, jiffies 4294931061 (age 5.960s)
hex dump (first 32 bytes):
78 bc 65 07 00 c9 ff ff 00 30 60 1c 80 88 ff ff x.e......0`.....
02 00 00 00 00 00 00 00 80 18 83 4e 80 88 ff ff ...........N....
backtrace:
[<ffffffffa023ef4a>] xfs_da_state_alloc+0x1a/0x30 [xfs]
[<ffffffffa021b6f3>] xfs_attr_node_hasname+0x23/0x90 [xfs]
[<ffffffffa021c6f1>] xfs_attr_set_iter+0x441/0xa30 [xfs]
[<ffffffffa02b5104>] xfs_xattri_finish_update+0x44/0x80 [xfs]
[<ffffffffa02b515e>] xfs_attr_finish_item+0x1e/0x40 [xfs]
[<ffffffffa0244744>] xfs_defer_finish_noroll+0x184/0x740 [xfs]
[<ffffffffa02a6473>] __xfs_trans_commit+0x153/0x3e0 [xfs]
[<ffffffffa021d149>] xfs_attr_set+0x469/0x7e0 [xfs]
[<ffffffffa02a78d9>] xfs_xattr_set+0x89/0xd0 [xfs]
[<ffffffff812e6512>] __vfs_removexattr+0x52/0x70
[<ffffffff812e6a08>] __vfs_removexattr_locked+0xb8/0x150
[<ffffffff812e6af6>] vfs_removexattr+0x56/0x100
[<ffffffff812e6bf8>] removexattr+0x58/0x90
[<ffffffff812e6cce>] path_removexattr+0x9e/0xc0
[<ffffffff812e6d44>] __x64_sys_lremovexattr+0x14/0x20
[<ffffffff81786b35>] do_syscall_64+0x35/0x80
I think this is a consequence of xfs_attr_node_removename_setup
attaching a new da(btree) state to xfs_attr_item and never freeing it.
I /think/ it's the case that the remove paths could detach the da state
earlier in the remove state machine since nothing else accesses the
state. However, let's future-proof the new xattr code by adding a
catch-all when we free the xfs_attr_item to make sure we never leak the
da state.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Combination of LOOKUP_IS_SCOPED and NULL nd->root.mnt is impossible
after successful path_init(). All places where ->root.mnt might
become NULL do that only if LOOKUP_IS_SCOPED is not there and
path_init() itself can return success without setting nd->root
only if ND_ROOT_PRESET had been set (in which case nd->root
had been set by caller and never changed) or if the name had
been a relative one *and* none of the bits in LOOKUP_IS_SCOPED
had been present.
Since all calls of legitimize_root() must be downstream of successful
path_init(), the check for !nd->root.mnt && (nd->flags & LOOKUP_IS_SCOPED)
is pure paranoia.
FWIW, it had been discussed (and agreed upon) with Aleksa back when
scoped lookups had been merged; looks like that had fallen through the
cracks back then.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
!foo() != 0 is a strange way to spell !foo(); fallout from
"fs: make unlazy_walk() error handling consistent"...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In f2fs_read_inline_data(), it is confused with checking of
inline_data flag, as we checked it before calling. So this
patch add some comments for f2fs_has_inline_data().
Signed-off-by: Chao Liu <liuchao@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The variable idx is assigned a value and is never read. The variable is
not used and is redundant, remove it.
Cleans up clang scan build warning:
warning: Although the value stored to 'idx' is used in the enclosing
expression, the value is never actually read from 'idx'
[deadcode.DeadStores]
Link: https://lkml.kernel.org/r/20220517093646.93628-2-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Anton Altaparmakov <anton@tuxera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All the timestamps in vfat_create() and vfat_mkdir() come from
fat_time_fat2unix() which ensures time granularity. We don't need to
truncate them to fit FAT's format.
Moreover, fat_truncate_crtime() and fat_timespec64_trunc_10ms() are also
removed because there is no caller anymore.
Link: https://lkml.kernel.org/r/20220503152536.2503003-4-cccheng@synology.com
Signed-off-by: Chung-Chiang Cheng <cccheng@synology.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
creation time is no longer mixed with change time. Add an in-memory field
for it, and report it in statx if supported.
Link: https://lkml.kernel.org/r/20220503152536.2503003-3-cccheng@synology.com
Signed-off-by: Chung-Chiang Cheng <cccheng@synology.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
FAT supports creation time but not change time, and there was no
corresponding timestamp for creation time in previous VFS. The original
implementation took the compromise of saving the in-memory change time
into the on-disk creation time field, but this would lead to compatibility
issues with non-linux systems.
To address this issue, this patch changes the behavior of ctime. It will
no longer be loaded and stored from the creation time on disk. Instead of
that, it'll be consistent with the in-memory mtime and share the same
on-disk field. All updates to mtime will also be applied to ctime in
memory, while all updates to ctime will be ignored.
Link: https://lkml.kernel.org/r/20220503152536.2503003-2-cccheng@synology.com
Signed-off-by: Chung-Chiang Cheng <cccheng@synology.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Separate fat_truncate_time() to each timestamps for later creation time
work.
This patch does not introduce any functional changes, it's merely
refactoring change.
Link: https://lkml.kernel.org/r/20220503152536.2503003-1-cccheng@synology.com
Signed-off-by: Chung-Chiang Cheng <cccheng@synology.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently it requires poking at debugfs to figure out the size and
population of the zswap cache on a host. There are no counters for reads
and writes against the cache. As a result, it's difficult to understand
zswap behavior on production systems.
Print zswap memory consumption and how many pages are zswapped out in
/proc/meminfo. Count zswapouts and zswapins in /proc/vmstat.
Link: https://lkml.kernel.org/r/20220510152847.230957-6-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Previously the protection of kernfs_pr_cont_buf was piggy backed by
rename_lock, which means that pr_cont() needs to be protected under
rename_lock. This can cause potential circular lock dependencies.
If there is an OOM, we have the following call hierarchy:
-> cpuset_print_current_mems_allowed()
-> pr_cont_cgroup_name()
-> pr_cont_kernfs_name()
pr_cont_kernfs_name() will grab rename_lock and call printk. So we have
the following lock dependencies:
kernfs_rename_lock -> console_sem
Sometimes, printk does a wakeup before releasing console_sem, which has
the dependence chain:
console_sem -> p->pi_lock -> rq->lock
Now, imagine one wants to read cgroup_name under rq->lock, for example,
printing cgroup_name in a tracepoint in the scheduler code. They will
be holding rq->lock and take rename_lock:
rq->lock -> kernfs_rename_lock
Now they will deadlock.
A prevention to this circular lock dependency is to separate the
protection of pr_cont_buf from rename_lock. In principle, rename_lock
is to protect the integrity of cgroup name when copying to buf. Once
pr_cont_buf has got its content, rename_lock can be dropped. So it's
safe to drop rename_lock after kernfs_name_locked (and
kernfs_path_from_node_locked) and rely on a dedicated pr_cont_lock
to protect pr_cont_buf.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220516190951.3144144-1-haoluo@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update client_info_show to show state of courtesy client
and seconds since last renew.
Reviewed-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This patch allows expired client with lock state to be in COURTESY
state. Lock conflict with COURTESY client is resolved by the fs/lock
code using the lm_lock_expirable and lm_expire_lock callback in the
struct lock_manager_operations.
If conflict client is in COURTESY state, set it to EXPIRABLE and
schedule the laundromat to run immediately to expire the client. The
callback lm_expire_lock waits for the laundromat to flush its work
queue before returning to caller.
Reviewed-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Add 2 new callbacks, lm_lock_expirable and lm_expire_lock, to
lock_manager_operations to allow the lock manager to take appropriate
action to resolve the lock conflict if possible.
A new field, lm_mod_owner, is also added to lock_manager_operations.
The lm_mod_owner is used by the fs/lock code to make sure the lock
manager module such as nfsd, is not freed while lock conflict is being
resolved.
lm_lock_expirable checks and returns true to indicate that the lock
conflict can be resolved else return false. This callback must be
called with the flc_lock held so it can not block.
lm_expire_lock is called to resolve the lock conflict if the returned
value from lm_lock_expirable is true. This callback is called without
the flc_lock held since it's allowed to block. Upon returning from
this callback, the lock conflict should be resolved and the caller is
expected to restart the conflict check from the beginnning of the list.
Lock manager, such as NFSv4 courteous server, uses this callback to
resolve conflict by destroying lock owner, or the NFSv4 courtesy client
(client that has expired but allowed to maintains its states) that owns
the lock.
Reviewed-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Add helper locks_owner_has_blockers to check if there is any blockers
for a given lockowner.
Reviewed-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
This patch moves create/destroy of laundry_wq from nfs4_state_start
and nfs4_state_shutdown_net to init_nfsd and exit_nfsd to prevent
the laundromat from being freed while a thread is processing a
conflicting lock.
Reviewed-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This patch allows expired client with open state to be in COURTESY
state. Share/access conflict with COURTESY client is resolved by
setting COURTESY client to EXPIRABLE state, schedule laundromat
to run and returning nfserr_jukebox to the request client.
Reviewed-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This patch provides courteous server support for delegation only.
Only expired client with delegation but no conflict and no open
or lock state is allowed to be in COURTESY state.
Delegation conflict with COURTESY/EXPIRABLE client is resolved by
setting it to EXPIRABLE, queue work for the laundromat and return
delay to the caller. Conflict is resolved when the laudromat runs
and expires the EXIRABLE client while the NFS client retries the
OPEN request. Local thread request that gets conflict is doing the
retry in _break_lease.
Client in COURTESY or EXPIRABLE state is allowed to reconnect and
continues to have access to its state. Access to the nfs4_client by
the reconnecting thread and the laundromat is serialized via the
client_lock.
Reviewed-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
nfsd_splice_actor() checks that the page being spliced does not
match the previous element in the svc_rqst::rq_pages array. We
believe this is to prevent a double put_page() in cases where the
READ payload is partially contained in the xdr_buf's head buffer.
However, the NFSD READ proc functions no longer place any part of
the READ payload in the head buffer, in order to properly support
NFS/RDMA READ with Write chunks. Therefore, simplify the logic in
nfsd_splice_actor() to remove this unnecessary check.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Yanming reported a kernel bug in Bugzilla kernel [1], which can be
reproduced. The bug message is:
The kernel message is shown below:
kernel BUG at fs/inode.c:611!
Call Trace:
evict+0x282/0x4e0
__dentry_kill+0x2b2/0x4d0
dput+0x2dd/0x720
do_renameat2+0x596/0x970
__x64_sys_rename+0x78/0x90
do_syscall_64+0x3b/0x90
[1] https://bugzilla.kernel.org/show_bug.cgi?id=215895
The bug is due to fuzzed inode has both inline_data and encrypted flags.
During f2fs_evict_inode(), as the inode was deleted by rename(), it
will cause inline data conversion due to conflicting flags. The page
cache will be polluted and the panic will be triggered in clear_inode().
Try fixing the bug by doing more sanity checks for inline data inode in
sanity_check_inode().
Cc: stable@vger.kernel.org
Reported-by: Ming Yan <yanming@tju.edu.cn>
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch tries to fix permission consistency issue as all other
mainline filesystems.
Since the initial introduction of (posix) fallocate back at the turn of
the century, it has been possible to use this syscall to change the
user-visible contents of files. This can happen by extending the file
size during a preallocation, or through any of the newer modes (punch,
zero, collapse, insert range). Because the call can be used to change
file contents, we should treat it like we do any other modification to a
file -- update the mtime, and drop set[ug]id privileges/capabilities.
The VFS function file_modified() does all this for us if pass it a
locked inode, so let's make fallocate drop permissions correctly.
Cc: stable@kernel.org
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It's nonsensical to register a provided buffer ring, if a classic
provided buffer group with the same ID exists. Depending on the order of
which we decide what type to pick, the other type will never get used.
Explicitly disallow it and return an error if this is attempted.
Fixes: c7fb19428d ("io_uring: add support for ring mapped supplied buffers")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We use ->buf_pages != 0 to tell if this is a shared buffer ring or a
classic provided buffer group. If we unregister the shared ring and
then attempt to use it, buf_pages is zero yet the classic list head
isn't properly initialized. This causes io_buffer_select() to think
that we have classic buffers available, but then we crash when we try
and get one from the list.
Just initialize the list if we unregister a shared buffer ring, leaving
it in a sane state for either re-registration or for attempting to use
it. And do the same for the initial setup from the classic path.
Fixes: c7fb19428d ("io_uring: add support for ring mapped supplied buffers")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The parameter desc_size in fsverity_create_info() is useless and it is
not referenced anywhere. The greatest meaning of desc_size here is to
indecate the size of struct fsverity_descriptor and futher calculate the
size of signature. However, the desc->sig_size can do it also and it is
indeed, so remove it.
Therefore, it is no need to acquire desc_size by fsverity_get_descriptor()
in ensure_verity_info(), so remove the parameter desc_ret in
fsverity_get_descriptor() too.
Signed-off-by: Zhang Jianhua <chris.zjh@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20220518132256.2297655-1-chris.zjh@huawei.com
If processing the on-disk mount options fails after any memory was
allocated in the ext4_fs_context, e.g. s_qf_names, then this memory is
leaked. Fix this by calling ext4_fc_free() instead of kfree() directly.
Reproducer:
mkfs.ext4 -F /dev/vdc
tune2fs /dev/vdc -E mount_opts=usrjquota=file
echo clear > /sys/kernel/debug/kmemleak
mount /dev/vdc /vdc
echo scan > /sys/kernel/debug/kmemleak
sleep 5
echo scan > /sys/kernel/debug/kmemleak
cat /sys/kernel/debug/kmemleak
Fixes: 7edfd85b1f ("ext4: Completely separate options parsing and sb setup")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Tested-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220513231605.175121-2-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The 'commit' option is only applicable for ext3 and ext4 filesystems,
and has never been accepted by the ext2 filesystem driver, so the ext4
driver shouldn't allow it on ext2 filesystems.
This fixes a failure in xfstest ext4/053.
Fixes: 8dc0aa8cf0 ("ext4: check incompatible mount options while mounting ext2/3")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Link: https://lore.kernel.org/r/20220510183232.172615-1-ebiggers@kernel.org
Fix following includecheck warning:
./fs/ext4/inode.c: linux/dax.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220504225025.44753-1-yang.lee@linux.alibaba.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When I wrote the freevxfs driver I had some odd choice of licensing
statements, the options are either GPL (without version) or an odd
BSD-ish licensense with advertising clause.
The GPL vs always meant to be the same as the kernel, that is version
2 only, and the odd BSD-ish license doesn't make much sense. Add
a GPL2.0-only SPDX tag to make the GPL intentions clear and drop the
bogus BSD license.
Acked-by: Krzysztof Błaszkowski <kb@sysmikro.com.pl>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The logic for handling events on child in groups that have a mark on
the parent inode, but without FS_EVENT_ON_CHILD flag in the mask is
duplicated in several places and inconsistent.
Move the logic into the preparation of mark type iterator, so that the
parent mark type will be excluded from all mark type iterations in that
case.
This results in several subtle changes of behavior, hopefully all
desired changes of behavior, for example:
- Group A has a mount mark with FS_MODIFY in mask
- Group A has a mark with ignore mask that does not survive FS_MODIFY
and does not watch children on directory D.
- Group B has a mark with FS_MODIFY in mask that does watch children
on directory D.
- FS_MODIFY event on file D/foo should not clear the ignore mask of
group A, but before this change it does
And if group A ignore mask was set to survive FS_MODIFY:
- FS_MODIFY event on file D/foo should be reported to group A on account
of the mount mark, but before this change it is wrongly ignored
Fixes: 2f02fd3fa1 ("fanotify: fix ignore mask logic for events on child and on dir")
Reported-by: Jan Kara <jack@suse.com>
Link: https://lore.kernel.org/linux-fsdevel/20220314113337.j7slrb5srxukztje@quack3.lan/
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220511190213.831646-3-amir73il@gmail.com
fsnotify_foreach_iter_mark_type() is used to reduce boilerplate code
of iterating all marks of a specific group interested in an event
by consulting the iterator report_mask.
Use an open coded version of that iterator in fsnotify_iter_next()
that collects all marks of the current iteration group without
consulting the iterator report_mask.
At the moment, the two iterator variants are the same, but this
decoupling will allow us to exclude some of the group's marks from
reporting the event, for example for event on child and inode marks
on parent did not request to watch events on children.
Fixes: 2f02fd3fa1 ("fanotify: fix ignore mask logic for events on child and on dir")
Reported-by: Jan Kara <jack@suse.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220511190213.831646-2-amir73il@gmail.com
POLL* are unannotated values for the userspace ABI, while everything
in-kernel should use EPOLL* and the __poll_t type.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220518084005.3255380-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_file_get_normal isn't marked inline, so don't claim it as such in the
forward declaration.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220518084005.3255380-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ERR_PTR abuses the high bits of a pointer to transport error information.
This is only safe for kernel pointers and not user pointers. Fix
io_buffer_select and its helpers to just return NULL for failure and get
rid of this abuse.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220518084005.3255380-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Provided buffers allow an application to supply io_uring with buffers
that can then be grabbed for a read/receive request, when the data
source is ready to deliver data. The existing scheme relies on using
IORING_OP_PROVIDE_BUFFERS to do that, but it can be difficult to use
in real world applications. It's pretty efficient if the application
is able to supply back batches of provided buffers when they have been
consumed and the application is ready to recycle them, but if
fragmentation occurs in the buffer space, it can become difficult to
supply enough buffers at the time. This hurts efficiency.
Add a register op, IORING_REGISTER_PBUF_RING, which allows an application
to setup a shared queue for each buffer group of provided buffers. The
application can then supply buffers simply by adding them to this ring,
and the kernel can consume then just as easily. The ring shares the head
with the application, the tail remains private in the kernel.
Provided buffers setup with IORING_REGISTER_PBUF_RING cannot use
IORING_OP_{PROVIDE,REMOVE}_BUFFERS for adding or removing entries to the
ring, they must use the mapped ring. Mapped provided buffer rings can
co-exist with normal provided buffers, just not within the same group ID.
To gauge overhead of the existing scheme and evaluate the mapped ring
approach, a simple NOP benchmark was written. It uses a ring of 128
entries, and submits/completes 32 at the time. 'Replenish' is how
many buffers are provided back at the time after they have been
consumed:
Test Replenish NOPs/sec
================================================================
No provided buffers NA ~30M
Provided buffers 32 ~16M
Provided buffers 1 ~10M
Ring buffers 32 ~27M
Ring buffers 1 ~27M
The ring mapped buffers perform almost as well as not using provided
buffers at all, and they don't care if you provided 1 or more back at
the same time. This means application can just replenish as they go,
rather than need to batch and compact, further reducing overhead in the
application. The NOP benchmark above doesn't need to do any compaction,
so that overhead isn't even reflected in the above test.
Co-developed-by: Dylan Yudaken <dylany@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Abstract this out from io_sqe_buffer_register() so we can use it
elsewhere too without duplicating this code.
No intended functional changes in this patch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Obviously not really useful since it's not transferring data, but it
is helpful in benchmarking overhead of provided buffers.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_provided_buffer_select() must drop the submit lock, if needed, even
in the error handling case. Failure to do so will leave us with the
ctx->uring_lock held, causing spew like:
====================================
WARNING: iou-wrk-366/368 still has locks held!
5.18.0-rc6-00294-gdf8dc7004331 #994 Not tainted
------------------------------------
1 lock held by iou-wrk-366/368:
#0: ffff0000c72598a8 (&ctx->uring_lock){+.+.}-{3:3}, at: io_ring_submit_lock+0x20/0x48
stack backtrace:
CPU: 4 PID: 368 Comm: iou-wrk-366 Not tainted 5.18.0-rc6-00294-gdf8dc7004331 #994
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace.part.0+0xa4/0xd4
show_stack+0x14/0x5c
dump_stack_lvl+0x88/0xb0
dump_stack+0x14/0x2c
debug_check_no_locks_held+0x84/0x90
try_to_freeze.isra.0+0x18/0x44
get_signal+0x94/0x6ec
io_wqe_worker+0x1d8/0x2b4
ret_from_fork+0x10/0x20
and triggering later hangs off get_signal() because we attempt to
re-grab the lock.
Reported-by: syzbot+987d7bb19195ae45208c@syzkaller.appspotmail.com
Fixes: 149c69b04a ("io_uring: abstract out provided buffer list selection")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass updated i_size in fscache_unuse_cookie() when called
from nfs_fscache_release_file(), which ensures the size of
an fscache object gets written to the cache storage. Failing
to do so results in unnessary reads from the NFS server, even
when the data is cached, due to a cachefiles object coherency
check failing with a trace similar to the following:
cachefiles_coherency: o=0000000e BAD osiz B=afbb3 c=0
This problem can be reproduced as follows:
#!/bin/bash
v=4.2; NFS_SERVER=127.0.0.1
set -e; trap cleanup EXIT; rc=1
function cleanup {
umount /mnt/nfs > /dev/null 2>&1
RC_STR="TEST PASS"
[ $rc -eq 1 ] && RC_STR="TEST FAIL"
echo "$RC_STR on $(uname -r) with NFSv$v and server $NFS_SERVER"
}
mount -o vers=$v,fsc $NFS_SERVER:/export /mnt/nfs
rm -f /mnt/nfs/file1.bin > /dev/null 2>&1
dd if=/dev/zero of=/mnt/nfs/file1.bin bs=4096 count=1 > /dev/null 2>&1
echo 3 > /proc/sys/vm/drop_caches
echo Read file 1st time from NFS server into fscache
dd if=/mnt/nfs/file1.bin of=/dev/null > /dev/null 2>&1
umount /mnt/nfs && mount -o vers=$v,fsc $NFS_SERVER:/export /mnt/nfs
echo 3 > /proc/sys/vm/drop_caches
echo Read file 2nd time from fscache
dd if=/mnt/nfs/file1.bin of=/dev/null > /dev/null 2>&1
echo Check mountstats for NFS read
grep -q "READ: 0" /proc/self/mountstats # (1st number) == 0
[ $? -eq 0 ] && rc=0
Fixes: a6b5a28eb5 "nfs: Convert to new fscache volume/cookie API"
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Tested-by: Daire Byrne <daire@dneg.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
NFSv4 can lose locks if, for example there is a network partition for
longer than the lease period. When this happens a warning message
NFS: __nfs4_reclaim_open_state: Lock reclaim failed!
is generated, possibly once for each lock (though rate limited).
This is potentially misleading as is can be read as suggesting that lock
reclaim was attempted. However the default behaviour is to not attempt
to recover locks (except due to server report).
This patch changes the reporting to produce at most one message for each
attempt to recover all state from a given server. The message reports
the server name and the number of locks lost if that number is non-zero.
It reports that locks were lost and give no suggestion as to whether
there was an attempt or not.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
There is a race condition in smb2_compound_op:
after_close:
num_rqst++;
if (cfile) {
cifsFileInfo_put(cfile); // sends SMB2_CLOSE to the server
cfile = NULL;
This is triggered by smb2_query_path_info operation that happens during
revalidate_dentry. In smb2_query_path_info, get_readable_path is called to
load the cfile, increasing the reference counter. If in the meantime, this
reference becomes the very last, this call to cifsFileInfo_put(cfile) will
trigger a SMB2_CLOSE request sent to the server just before sending this compound
request – and so then the compound request fails either with EBADF/EIO depending
on the timing at the server, because the handle is already closed.
In the first scenario, the race seems to be happening between smb2_query_path_info
triggered by the rename operation, and between “cleanup” of asynchronous writes – while
fsync(fd) likely waits for the asynchronous writes to complete, releasing the writeback
structures can happen after the close(fd) call. So the EBADF/EIO errors will pop up if
the timing is such that:
1) There are still outstanding references after close(fd) in the writeback structures
2) smb2_query_path_info successfully fetches the cfile, increasing the refcounter by 1
3) All writeback structures release the same cfile, reducing refcounter to 1
4) smb2_compound_op is called with that cfile
In the second scenario, the race seems to be similar – here open triggers the
smb2_query_path_info operation, and if all other threads in the meantime decrease the
refcounter to 1 similarly to the first scenario, again SMB2_CLOSE will be sent to the
server just before issuing the compound request. This case is harder to reproduce.
See https://bugzilla.samba.org/show_bug.cgi?id=15051
Cc: stable@vger.kernel.org
Fixes: 8de9e86c67 ("cifs: create a helper to find a writeable handle by path name")
Signed-off-by: Ondrej Hubsch <ohubsch@purestorage.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
We gate whether to IOPOLL for a request on whether the opcode is allowed
on a ring setup for IOPOLL and if it's got a file assigned. MSG_RING
is the only one that allows a file yet isn't pollable, it's merely
supported to allow communication on an IOPOLL ring, not because we can
poll for completion of it.
Put the assigned file early and clear it, so we don't attempt to poll
for it.
Reported-by: syzbot+1a0a53300ce782f8b3ad@syzkaller.appspotmail.com
Fixes: 3f1d52abf0 ("io_uring: defer msg-ring file validity check until command issue")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Tryng to rename a directory that has all following properties fails with
EINVAL and triggers the 'WARN_ON_ONCE(!fscrypt_has_encryption_key(dir))'
in f2fs_match_ci_name():
- The directory is casefolded
- The directory is encrypted
- The directory's encryption key is not yet set up
- The parent directory is *not* encrypted
The problem is incorrect handling of the lookup of ".." to get the
parent reference to update. fscrypt_setup_filename() treats ".." (and
".") specially, as it's never encrypted. It's passed through as-is, and
setting up the directory's key is not attempted. As the name isn't a
no-key name, f2fs treats it as a "normal" name and attempts a casefolded
comparison. That breaks the assumption of the WARN_ON_ONCE() in
f2fs_match_ci_name() which assumes that for encrypted directories,
casefolded comparisons only happen when the directory's key is set up.
We could just remove this WARN_ON_ONCE(). However, since casefolding is
always a no-op on "." and ".." anyway, let's instead just not casefold
these names. This results in the standard bytewise comparison.
Fixes: 7ad08a58bf ("f2fs: Handle casefolding with Encryption")
Cc: <stable@vger.kernel.org> # v5.11+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The f2fs_gc uses a bitmap to indicate pinned sections, but when disabling
chckpoint, we call f2fs_gc() with NULL_SEGNO which selects the same dirty
segment as a victim all the time, resulting in checkpoint=disable failure,
for example. Let's pick another one, if we fail to collect it.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Hulk Robot reported a BUG_ON:
==================================================================
EXT4-fs error (device loop3): ext4_mb_generate_buddy:805: group 0,
block bitmap and bg descriptor inconsistent: 25 vs 31513 free clusters
kernel BUG at fs/ext4/ext4_jbd2.c:53!
invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 0 PID: 25371 Comm: syz-executor.3 Not tainted 5.10.0+ #1
RIP: 0010:ext4_put_nojournal fs/ext4/ext4_jbd2.c:53 [inline]
RIP: 0010:__ext4_journal_stop+0x10e/0x110 fs/ext4/ext4_jbd2.c:116
[...]
Call Trace:
ext4_write_inline_data_end+0x59a/0x730 fs/ext4/inline.c:795
generic_perform_write+0x279/0x3c0 mm/filemap.c:3344
ext4_buffered_write_iter+0x2e3/0x3d0 fs/ext4/file.c:270
ext4_file_write_iter+0x30a/0x11c0 fs/ext4/file.c:520
do_iter_readv_writev+0x339/0x3c0 fs/read_write.c:732
do_iter_write+0x107/0x430 fs/read_write.c:861
vfs_writev fs/read_write.c:934 [inline]
do_pwritev+0x1e5/0x380 fs/read_write.c:1031
[...]
==================================================================
Above issue may happen as follows:
cpu1 cpu2
__________________________|__________________________
do_pwritev
vfs_writev
do_iter_write
ext4_file_write_iter
ext4_buffered_write_iter
generic_perform_write
ext4_da_write_begin
vfs_fallocate
ext4_fallocate
ext4_convert_inline_data
ext4_convert_inline_data_nolock
ext4_destroy_inline_data_nolock
clear EXT4_STATE_MAY_INLINE_DATA
ext4_map_blocks
ext4_ext_map_blocks
ext4_mb_new_blocks
ext4_mb_regular_allocator
ext4_mb_good_group_nolock
ext4_mb_init_group
ext4_mb_init_cache
ext4_mb_generate_buddy --> error
ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)
ext4_restore_inline_data
set EXT4_STATE_MAY_INLINE_DATA
ext4_block_write_begin
ext4_da_write_end
ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)
ext4_write_inline_data_end
handle=NULL
ext4_journal_stop(handle)
__ext4_journal_stop
ext4_put_nojournal(handle)
ref_cnt = (unsigned long)handle
BUG_ON(ref_cnt == 0) ---> BUG_ON
The lock held by ext4_convert_inline_data is xattr_sem, but the lock
held by generic_perform_write is i_rwsem. Therefore, the two locks can
be concurrent.
To solve above issue, we add inode_lock() for ext4_convert_inline_data().
At the same time, move ext4_convert_inline_data() in front of
ext4_punch_hole(), remove similar handling from ext4_punch_hole().
Fixes: 0c8d414f16 ("ext4: let fallocate handle inline data correctly")
Cc: stable@vger.kernel.org
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220428134031.4153381-1-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Symlink's external data block is one kind of metadata block, and now
that almost all ext4 metadata block's page cache (e.g. directory blocks,
quota blocks...) belongs to bdev backing inode except the symlink. It
is essentially worked in data=journal mode like other regular file's
data block because probably in order to make it simple for generic VFS
code handling symlinks or some other historical reasons, but the logic
of creating external data block in ext4_symlink() is complicated. and it
also make things confused if user do not want to let the filesystem
worked in data=journal mode. This patch convert the final exceptional
case and make things clean, move the mapping of the symlink's external
data block to bdev like any other metadata block does.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20220424140936.1898920-3-yi.zhang@huawei.com
Current ext4_getblk() might sleep if some resources are not valid or
could be race with a concurrent extents modifing procedure. So we
cannot call ext4_getblk() and ext4_map_blocks() to get map blocks in
the atomic context in some fast path (e.g. the upcoming procedure of
getting symlink external block in the RCU context), even if the map
extents have already been check and cached.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20220424140936.1898920-2-yi.zhang@huawei.com
In __ext4_super() we always overwrote the user specified journal_ioprio
value with a default value, expecting parse_apply_sb_mount_options() to
later correctly set ctx->journal_ioprio to the user specified value.
However, if parse_apply_sb_mount_options() returned early because of
empty sbi->es_s->s_mount_opts, the correct journal_ioprio value was
never set.
This patch fixes __ext4_super() to only use the default value if the
user has not specified any value for journal_ioprio.
Similarly, the remount behavior was to either use journal_ioprio
value specified during initial mount, or use the default value
irrespective of the journal_ioprio value specified during remount.
This patch modifies this to first check if a new value for ioprio
has been passed during remount and apply it. If no new value is
passed, use the value specified during initial mount.
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/20220418083545.45778-1-ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Otherwise nonaligned fstrim calls will works inconveniently for iterative
scanners, for example:
// trim [0,16MB] for group-1, but mark full group as trimmed
fstrim -o $((1024*1024*128)) -l $((1024*1024*16)) ./m
// handle [16MB,16MB] for group-1, do nothing because group already has the flag.
fstrim -o $((1024*1024*144)) -l $((1024*1024*16)) ./m
[ Update function documentation for ext4_trim_all_free -- TYT ]
Signed-off-by: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru>
Link: https://lore.kernel.org/r/1650214995-860245-1-git-send-email-dmtrmonakhov@yandex-team.ru
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Zoned devices are expected to have zone sizes in the range of 1-2GB for
ZNS SSDs and SMR HDDs have zone sizes of 256MB, so there is no need to
allow arbitrarily small zone sizes on btrfs.
But for testing purposes with emulated devices it is sometimes desirable
to create devices with as small as 4MB zone size to uncover errors.
So use 4MB as the smallest possible zone size and reject mounts of devices
with a smaller zone size.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Btrfs defaults to max_inline=2K to make small writes inlined into
metadata.
The default value is always a win, as even DUP/RAID1/RAID10 doubles the
metadata usage, it should still cause less physical space used compared
to a 4K regular extents.
But since the introduction of RAID1C3 and RAID1C4 it's no longer the case,
users may find inlined extents causing too much space wasted, and want
to convert those inlined extents back to regular extents.
Unfortunately defrag will unconditionally skip all inline extents, no
matter if the user is trying to converting them back to regular extents.
So this patch will add a small exception for defrag_collect_targets() to
allow defragging inline extents, if and only if the inlined extents are
larger than max_inline, allowing users to convert them to regular ones.
This also allows us to defrag extents like the following:
item 6 key (257 EXTENT_DATA 0) itemoff 15794 itemsize 69
generation 7 type 0 (inline)
inline extent data size 48 ram_bytes 4096 compression 1 (zlib)
item 7 key (257 EXTENT_DATA 4096) itemoff 15741 itemsize 53
generation 7 type 1 (regular)
extent data disk byte 13631488 nr 4096
extent data offset 0 nr 16384 ram 16384
extent compression 1 (zlib)
Previously we're unable to do any defrag, since the first extent is
inlined, and the second one has no extent to merge.
Now we can defrag it to just one single extent, saving 48 bytes metadata
space.
item 6 key (257 EXTENT_DATA 0) itemoff 15810 itemsize 53
generation 8 type 1 (regular)
extent data disk byte 13635584 nr 4096
extent data offset 0 nr 20480 ram 20480
extent compression 1 (zlib)
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The following error message lack the "0x" obviously:
cannot mount because of unsupported optional features (4000)
Add the prefix to make it less confusing. This can happen on older
kernels that try to mount a filesystem with newer features so it makes
sense to backport to older trees.
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When reserving metadata units for creating an inode, we don't need to
reserve one extra unit for the inode ref item because when creating the
inode, at btrfs_create_new_inode(), we always insert the inode item and
the inode ref item in a single batch (a single btree insert operation,
and both ending up in the same leaf).
As we have accounted already one unit for the inode item, the extra unit
for the inode ref item is superfluous, it only makes us reserve more
metadata than necessary and often adding more reclaim pressure if we are
low on available metadata space.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The block_group->alloc_offset is an offset from the start of the block
group. OTOH, the ->meta_write_pointer is an address in the logical
space. So, we should compare the alloc_offset shifted with the
block_group->start.
Fixes: afba2bc036 ("btrfs: zoned: implement active zone tracking")
CC: stable@vger.kernel.org # 5.16+
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A send operation reads extent data using the buffered IO path for getting
extent data to send in write commands and this is both because it's simple
and to make use of the generic readahead infrastructure, which results in
a massive speedup.
However this fills the page cache with data that, most of the time, is
really only used by the send operation - once the write commands are sent,
it's not useful to have the data in the page cache anymore. For large
snapshots, bringing all data into the page cache eventually leads to the
need to evict other data from the page cache that may be more useful for
applications (and kernel subsystems).
Even if extents are shared with the subvolume on which a snapshot is based
on and the data is currently on the page cache due to being read through
the subvolume, attempting to read the data through the snapshot will
always result in bringing a new copy of the data into another location in
the page cache (there's currently no shared memory for shared extents).
So make send evict the data it has read before if when it first opened
the inode, its mapping had no pages currently loaded: when
inode->i_mapping->nr_pages has a value of 0. Do this instead of deciding
based on the return value of filemap_range_has_page() before reading an
extent because the generic readahead mechanism may read pages beyond the
range we request (and it very often does it), which means a call to
filemap_range_has_page() will return true due to the readahead that was
triggered when processing a previous extent - we don't have a simple way
to distinguish this case from the case where the data was brought into
the page cache through someone else. So checking for the mapping number
of pages being 0 when we first open the inode is simple, cheap and it
generally accomplishes the goal of not trashing the page cache - the
only exception is if part of data was previously loaded into the page
cache through the snapshot by some other process, in that case we end
up not evicting any data send brings into the page cache, just like
before this change - but that however is not the common case.
Example scenario, on a box with 32G of RAM:
$ btrfs subvolume create /mnt/sv1
$ xfs_io -f -c "pwrite 0 4G" /mnt/sv1/file1
$ btrfs subvolume snapshot -r /mnt/sv1 /mnt/snap1
$ free -m
total used free shared buff/cache available
Mem: 31937 186 26866 0 4883 31297
Swap: 8188 0 8188
# After this we get less 4G of free memory.
$ btrfs send /mnt/snap1 >/dev/null
$ free -m
total used free shared buff/cache available
Mem: 31937 186 22814 0 8935 31297
Swap: 8188 0 8188
The same, obviously, applies to an incremental send.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Enable access to the NFSv4 acl via the NFSv4.1 'dacl' and 'sacl'
attributes.
This allows the server to authenticate the DACL and the SACL operations
separately, since reading and/or editing the SACL is usually considered
to be a privileged operation.
It also allows the propagation of automatic inheritance information that
was not supported by the NFSv4.0 'acl' attribute.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Add the ability to set or retrieve the acl using the NFSv4.1 'dacl' and
'sacl' attributes to the NFSv4 xdr encoders/decoders.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When caching a NFSv4 ACL, we want to specify whether we are caching an
NFSv4.0 type acl, the NFSv4.1 dacl or the NFSv4.1 sacl.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When doing layoutget as part of the open() compound, we have to be
careful to release the layout locks before we can call any further RPC
calls, such as setattr(). The reason is that those calls could trigger
a recall, which could deadlock.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Only report the error when the server is returning a fatal error, such
as ESTALE, EIO, etc...
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When we handle an error by redirtying the page, we're not corrupting the
mapping, so we don't want the error to be recorded in the mapping.
If the caller has specified a sync_mode of WB_SYNC_NONE, we can just
return AOP_WRITEPAGE_ACTIVATE. However if we're dealing with
WB_SYNC_ALL, we need to ensure that retries happen when the errors are
non-fatal.
Reported-by: Olga Kornievskaia <aglo@umich.edu>
Fixes: 8fc75bed96 ("NFS: Fix up return value on fatal errors in nfs_page_async_flush()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit 587f03deb6 caused pnfs_update_layout() to stop returning ENOMEM
when the memory allocation fails, and hence causes it to fall back to
trying to do I/O through the MDS. There is no guarantee that this will
fare any better. If we're failing the pNFS layout allocation, then we
should just redirty the page and retry later.
Reported-by: Olga Kornievskaia <aglo@umich.edu>
Fixes: 587f03deb6 ("pnfs: refactor send_layoutget")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
We need to filter out ENOMEM in nfs_error_is_fatal_on_server(), because
running out of memory on our client is not a server error.
Reported-by: Olga Kornievskaia <aglo@umich.edu>
Fixes: 2dc23afffb ("NFS: ENOMEM should also be a fatal error.")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When "-o device" mount option is not specified, scan the device table
and instantiate the devices if there's any in the device table. In this
case, the tag field of each device slot uniquely specifies a device.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220512055601.106109-1-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Use asynchronous io to read data from fscache may greatly improve IO
bandwidth for sequential buffered read scenario.
Change erofs_fscache_read_folios to erofs_fscache_read_folios_async,
and read data from fscache asynchronously.
Make .readpage()/.readahead() to use this new helper.
Signed-off-by: Xin Yin <yinxin.x@bytedance.com>
Reviewed-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220509074028.74954-23-jefflexu@linux.alibaba.com
Acked-by: Chao Yu <chao@kernel.org>
[ Gao Xiang: minor styling changes. ]
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Introduce 'fsid' mount option to enable on-demand read sementics, in
which case, erofs will be mounted from data blobs. Users could specify
the name of primary data blob by this mount option.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220425122143.56815-22-jefflexu@linux.alibaba.com
Acked-by: Chao Yu <chao@kernel.org>
Tested-by: Zichen Tian <tianzichen@kuaishou.com>
Tested-by: Jia Zhu <zhujia.zj@bytedance.com>
Tested-by: Yan Song <yansong.ys@antgroup.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Implement the data plane of reading data from data blobs over fscache
for inline layout.
For the heading non-inline part, the data plane for non-inline layout is
reused, while only the tail packing part needs special handling.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220425122143.56815-20-jefflexu@linux.alibaba.com
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Implement the data plane of reading data from data blobs over fscache
for non-inline layout.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220425122143.56815-19-jefflexu@linux.alibaba.com
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Similar to the multi-device mode, erofs could be mounted from one
primary data blob (mandatory) and multiple extra data blobs (optional).
Register fscache context for each extra data blob.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220425122143.56815-17-jefflexu@linux.alibaba.com
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Registers fscache context for primary data blob. Also move the
initialization of s_op and related fields forward, since anonymous
inode will be allocated under the super block when registering the
fscache context.
Something worth mentioning about the cleanup routine.
1. The fscache context will instantiate anonymous inodes under the super
block. Release these anonymous inodes when .put_super() is called, or
we'll get "VFS: Busy inodes after unmount." warning.
2. The fscache context is initialized prior to the root inode. If
.kill_sb() is called when mount failed, .put_super() won't be called
when root inode has not been initialized yet. Thus .kill_sb() shall
also contain the cleanup routine.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220425122143.56815-16-jefflexu@linux.alibaba.com
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Add erofs_fscache_read_folios() helper reading from fscache. It supports
on-demand read semantics. That is, it will make the backend prepare for
the data when cache miss. Once data ready, it will read from the cache.
This helper can then be used to implement .readpage()/.readahead() of
on-demand read semantics.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220425122143.56815-15-jefflexu@linux.alibaba.com
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Introduce one anonymous inode for data blobs so that erofs can cache
metadata directly within such anonymous inode.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220425122143.56815-14-jefflexu@linux.alibaba.com
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Introduce a context structure for managing data blobs, and helper
functions for initializing and cleaning up this context structure.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220425122143.56815-13-jefflexu@linux.alibaba.com
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
A new fscache based mode is going to be introduced for erofs, in which
case on-demand read semantics is implemented through fscache.
As the first step, register fscache volume for each erofs filesystem.
That means, data blobs can not be shared among erofs filesystems. In the
following iteration, we are going to introduce the domain semantics, in
which case several erofs filesystems can belong to one domain, and data
blobs can be shared among these erofs filesystems of one domain.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220425122143.56815-12-jefflexu@linux.alibaba.com
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Until then erofs is exactly blockdev based filesystem.
A new fscache-based mode is going to be introduced for erofs to support
scenarios where on-demand read semantics is needed, e.g. container
image distribution. In this case, erofs could be mounted from data blobs
through fscache.
Add a helper checking which mode erofs works in, and twist the code in
preparation for the upcoming fscache mode.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220425122143.56815-11-jefflexu@linux.alibaba.com
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
... so that it can be used in the following introduced fscache mode.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220425122143.56815-10-jefflexu@linux.alibaba.com
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Add tracepoints for on-demand read mode. Currently following tracepoints
are added:
OPEN request / COPEN reply
CLOSE request
READ request / CREAD reply
write through anonymous fd
release of anonymous fd
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20220425122143.56815-8-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Enable on-demand read mode by adding an optional parameter to the "bind"
command.
On-demand mode will be turned on when this parameter is "ondemand", i.e.
"bind ondemand". Otherwise cachefiles will work in the original mode.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220509074028.74954-7-jefflexu@linux.alibaba.com
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Implement the data plane of on-demand read mode.
The early implementation [1] place the entry to
cachefiles_ondemand_read() in fscache_read(). However, fscache_read()
can only detect if the requested file range is fully cache miss, whilst
we need to notify the user daemon as long as there's a hole inside the
requested file range.
Thus the entry is now placed in cachefiles_prepare_read(). When working
in on-demand read mode, once a hole detected, the read routine will send
a READ request to the user daemon. The user daemon needs to fetch the
data and write it to the cache file. After sending the READ request, the
read routine will hang there, until the READ request is handled by the
user daemon. Then it will retry to read from the same file range. If no
progress encountered, the read routine will fail then.
A new NETFS_SREQ_ONDEMAND flag is introduced to indicate that on-demand
read should be done when a cache miss encountered.
[1] https://lore.kernel.org/all/20220406075612.60298-6-jefflexu@linux.alibaba.com/ #v8
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20220425122143.56815-6-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Notify the user daemon that cookie is going to be withdrawn, providing a
hint that the associated anonymous fd can be closed.
Be noted that this is only a hint. The user daemon may close the
associated anonymous fd when receiving the CLOSE request, then it will
receive another anonymous fd when the cookie gets looked up. Or it may
ignore the CLOSE request, and keep writing data through the anonymous
fd. However the next time the cookie gets looked up, the user daemon
will still receive another new anonymous fd.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20220425122143.56815-5-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Add a refcount to avoid the deadlock in on-demand read mode. The
on-demand read mode will pin the corresponding cachefiles object for
each anonymous fd. The cachefiles object is unpinned when the anonymous
fd gets closed. When the user daemon exits and the fd of
"/dev/cachefiles" device node gets closed, it will wait for all
cahcefiles objects getting withdrawn. Then if there's any anonymous fd
getting closed after the fd of the device node, the user daemon will
hang forever, waiting for all objects getting withdrawn.
To fix this, add a refcount indicating if there's any object pinned by
anonymous fds. The cachefiles cache gets unbound and withdrawn when the
refcount is decreased to 0. It won't change the behaviour of the
original mode, in which case the cachefiles cache gets unbound and
withdrawn as long as the fd of the device node gets closed.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220509074028.74954-4-jefflexu@linux.alibaba.com
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Fscache/CacheFiles used to serve as a local cache for a remote
networking fs. A new on-demand read mode will be introduced for
CacheFiles, which can boost the scenario where on-demand read semantics
are needed, e.g. container image distribution.
The essential difference between these two modes is seen when a cache
miss occurs: In the original mode, the netfs will fetch the data from
the remote server and then write it to the cache file; in on-demand
read mode, fetching the data and writing it into the cache is delegated
to a user daemon.
As the first step, notify the user daemon when looking up cookie. In
this case, an anonymous fd is sent to the user daemon, through which the
user daemon can write the fetched data to the cache file. Since the user
daemon may move the anonymous fd around, e.g. through dup(), an object
ID uniquely identifying the cache file is also attached.
Also add one advisory flag (FSCACHE_ADV_WANT_CACHE_SIZE) suggesting that
the cache file size shall be retrieved at runtime. This helps the
scenario where one cache file contains multiple netfs files, e.g. for
the purpose of deduplication. In this case, netfs itself has no idea the
size of the cache file, whilst the user daemon should give the hint on
it.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220509074028.74954-3-jefflexu@linux.alibaba.com
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Extract the generic routine of writing data to cache files, and make it
generally available.
This will be used by the following patch implementing on-demand read
mode. Since it's called inside CacheFiles module, make the interface
generic and unrelated to netfs_cache_resources.
It is worth noting that, ki->inval_counter is not initialized after
this cleanup. It shall not make any visible difference, since
inval_counter is no longer used in the write completion routine, i.e.
cachefiles_write_complete().
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Acked-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20220425122143.56815-2-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Since errors from nfs_pageio_complete() are already being reported
through nfs_async_write_error(), we should not be returning them to the
callers of do_writepages() as well. They will end up being reported
through the generic mechanism instead.
Fixes: 6fbda89b25 ("NFS: Replace custom error reporting mechanism with generic one")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If we do flush cached writebacks in nfs_write_end() due to the imminent
expiration of an RPCSEC_GSS session, then we should defer reporting any
resulting errors until the calls to file_check_and_advance_wb_err() in
nfs_file_write() and nfs_file_fsync().
Fixes: 6fbda89b25 ("NFS: Replace custom error reporting mechanism with generic one")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Any errors reported by the write() system call need to be cleared from
the file descriptor's error tracking. The current call to nfs_wb_all()
causes the error to be reported, but since it doesn't call
file_check_and_advance_wb_err(), we can end up reporting the same error
a second time when the application calls fsync().
Note that since Linux 4.13, the rule is that EIO may be reported for
write(), but it must be reported by a subsequent fsync(), so let's just
drop reporting it in write.
The check for nfs_ctx_key_to_expire() is just a duplicate to the one
already in nfs_write_end(), so let's drop that too.
Reported-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Fixes: ce368536dd ("nfs: nfs_file_write() should check for writeback errors")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If the commit to disk is interrupted, we should still first check for
filesystem errors so that we can report them in preference to the error
due to the signal.
Fixes: 2197e9b06c ("NFS: Fix up fsync() when the server rebooted")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If the attempt to flush data was interrupted due to a local signal, then
just requeue the writes back for I/O.
Fixes: 6fbda89b25 ("NFS: Replace custom error reporting mechanism with generic one")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This patch enables idmapped mounts for erofs, since all dedicated helpers
for this functionality existsm, so, in this patch we just pass down the
user_namespace argument from the VFS methods to the relevant helpers.
Simple idmap example on erofs image:
1. mkdir dir
2. touch dir/file
3. mkfs.erofs erofs.img dir
4. mount -t erofs -o loop erofs.img /mnt/erofs/
5. ls -ln /mnt/erofs/
total 0
-rw-rw-r-- 1 1000 1000 0 May 17 15:26 file
6. mount-idmapped --map-mount b:1000:1001:1 /mnt/erofs/ /mnt/scratch_erofs/
7. ls -ln /mnt/scratch_erofs/
total 0
-rw-rw-r-- 1 1001 1001 0 May 17 15:26 file
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Link: https://lore.kernel.org/r/20220517104103.3570721-1-chao@kernel.org
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Implement export operations in order to make EROFS support accessing
inodes with filehandles so that it can be exported via NFS and used
by overlayfs.
Without this patch, 'exportfs -rv' will report:
exportfs: /root/erofs_mp does not support NFS export
Also tested with unionmount-testsuite and the testcase below passes now:
./run --ov --erofs --verify hard-link
For more details about the testcase, see:
https://github.com/amir73il/unionmount-testsuite/pull/6
Signed-off-by: Hongnan Li <hongnan.li@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20220425040712.91685-1-hongnan.li@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
I got some KASAN report as below:
[ 46.959738] ==================================================================
[ 46.960430] BUG: KASAN: use-after-free in z_erofs_shifted_transform+0x2bd/0x370
[ 46.960430] Read of size 4074 at addr ffff8880300c2f8e by task fssum/188
...
[ 46.960430] Call Trace:
[ 46.960430] <TASK>
[ 46.960430] dump_stack_lvl+0x41/0x5e
[ 46.960430] print_report.cold+0xb2/0x6b7
[ 46.960430] ? z_erofs_shifted_transform+0x2bd/0x370
[ 46.960430] kasan_report+0x8a/0x140
[ 46.960430] ? z_erofs_shifted_transform+0x2bd/0x370
[ 46.960430] kasan_check_range+0x14d/0x1d0
[ 46.960430] memcpy+0x20/0x60
[ 46.960430] z_erofs_shifted_transform+0x2bd/0x370
[ 46.960430] z_erofs_decompress_pcluster+0xaae/0x1080
The root cause is that the tail pcluster won't be a complete filesystem
block anymore. So if ztailpacking is used, the second part of an
uncompressed tail pcluster may not be ``rq->pageofs_out``.
Fixes: ab749badf9 ("erofs: support unaligned data decompression")
Fixes: cecf864d3d ("erofs: support inline data decompression")
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20220512115833.24175-1-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Some comments haven't been useful anymore since the code updated.
Let's drop them instead.
Link: https://lore.kernel.org/r/20220506194612.117120-2-hsiangkao@linux.alibaba.com
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
The big pcluster feature has been merged for a year, it has been mostly
stable now.
Signed-off-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20220407050505.12683-1-huyue2@coolpad.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
XFS has the unique behavior (as compared to the other Linux filesystems)
that on writeback errors it will completely invalidate the affected
folio and force the page cache to reread the contents from disk. All
other filesystems leave the page mapped and up to date.
This is a rude awakening for user programs, since (in the case where
write fails but reread doesn't) file contents will appear to revert to
old disk contents with no notification other than an EIO on fsync. This
might have been annoying back in the days when iomap dealt with one page
at a time, but with multipage folios, we can now throw away *megabytes*
worth of data for a single write error.
On *most* Linux filesystems, a program can respond to an EIO on write by
redirtying the entire file and scheduling it for writeback. This isn't
foolproof, since the page that failed writeback is no longer dirty and
could be evicted, but programs that want to recover properly *also*
have to detect XFS and regenerate every write they've made to the file.
When running xfs/314 on arm64, I noticed a UAF when xfs_discard_folio
invalidates multipage folios that could be undergoing writeback. If,
say, we have a 256K folio caching a mix of written and unwritten
extents, it's possible that we could start writeback of the first (say)
64K of the folio and then hit a writeback error on the next 64K. We
then free the iop attached to the folio, which is really bad because
writeback completion on the first 64k will trip over the "blocks per
folio > 1 && !iop" assertion.
This can't be fixed by only invalidating the folio if writeback fails at
the start of the folio, since the folio is marked !uptodate, which trips
other assertions elsewhere. Get rid of the whole behavior entirely.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Introduce dax_recovery_write() operation. The function is used to
recover a dax range that contains poison. Typical use case is when
a user process receives a SIGBUS with si_code BUS_MCEERR_AR
indicating poison(s) in a dax range, in response, the user process
issues a pwrite() to the page-aligned dax range, thus clears the
poison and puts valid data in the range.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Link: https://lore.kernel.org/r/20220422224508.440670-6-jane.chu@oracle.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Up till now, dax_direct_access() is used implicitly for normal
access, but for the purpose of recovery write, dax range with
poison is requested. To make the interface clear, introduce
enum dax_access_mode {
DAX_ACCESS,
DAX_RECOVERY_WRITE,
}
where DAX_ACCESS is used for normal dax access, and
DAX_RECOVERY_WRITE is used for dax recovery write.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Link: https://lore.kernel.org/r/165247982851.52965.11024212198889762949.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Every time we send a write command, we open the inode, read some data to
a buffer and then close the inode. The amount of data we read for each
write command is at most 48K, returned by max_send_read_size(), and that
corresponds to: BTRFS_SEND_BUF_SIZE - 16K = 48K. In practice this does
not add any significant overhead, because the time elapsed between every
close (iput()) and open (btrfs_iget()) is very short, so the inode is kept
in the VFS's cache after the iput() and it's still there by the time we
do the next btrfs_iget().
As between processing extents of the current inode we don't do anything
else, it makes sense to keep the inode open after we process its first
extent that needs to be sent and keep it open until we start processing
the next inode. This serves to facilitate the next change, which aims
to avoid having send operations trash the page cache with data extents.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Create a new bio_set that contains all the per-bio private data needed
by btrfs for direct I/O and tell the iomap code to use that instead
of separately allocation the btrfs_dio_private structure.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The btrfs_dio_private structure is only used in inode.c, so move the
definition there.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This field is never used, so remove it. Last use was probably in
23ea8e5a07 ("Btrfs: load checksum data once when submitting a direct
read io").
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Make use of the new iomap_iter->private field to avoid a memory
allocation per iomap range.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Allow the file system to keep state for all iterations. For now only
wire it up for direct I/O as there is an immediate need for it there.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Allow the file system to provide a specific bio_set for allocating
direct I/O bios. This will allow file systems that use the
->submit_io hook to stash away additional information for file system
use.
To make use of this additional space for information in the completion
path, the file system needs to override the ->bi_end_io callback and
then call back into iomap, so export iomap_dio_bio_end_io for that.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a wrapper around iomap_dio_rw that keeps the direct I/O internals
isolated in inode.c.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While the active zones within an active block group are reset, and their
active resource is released, the block group itself is kept in the active
block group list and marked as active. As a result, the list will contain
more than max_active_zones block groups. That itself is not fatal for the
device as the zones are properly reset.
However, that inflated list is, of course, strange. Also, a to-appear
patch series, which deactivates an active block group on demand, gets
confused with the wrong list.
So, fix the issue by finishing the unused block group once it gets
read-only, so that we can release the active resource in an early stage.
Fixes: be1a1d7a5d ("btrfs: zoned: finish fully written block group")
CC: stable@vger.kernel.org # 5.16+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit be1a1d7a5d ("btrfs: zoned: finish fully written block group")
introduced zone finishing code both for data and metadata end_io path.
However, the metadata side is not working as it should. First, it
compares logical address (eb->start + eb->len) with offset within a
block group (cache->zone_capacity) in submit_eb_page(). That essentially
disabled zone finishing on metadata end_io path.
Furthermore, fixing the issue above revealed we cannot call
btrfs_zone_finish_endio() in end_extent_buffer_writeback(). We cannot
call btrfs_lookup_block_group() which require spin lock inside end_io
context.
Introduce btrfs_schedule_zone_finish_bg() to wait for the extent buffer
writeback and do the zone finish IO in a workqueue.
Also, drop EXTENT_BUFFER_ZONE_FINISH as it is no longer used.
Fixes: be1a1d7a5d ("btrfs: zoned: finish fully written block group")
CC: stable@vger.kernel.org # 5.16+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, btrfs_zone_finish_endio() finishes a block group only when the
written region reaches the end of the block group. We can also finish the
block group when no more allocation is possible.
Fixes: be1a1d7a5d ("btrfs: zoned: finish fully written block group")
CC: stable@vger.kernel.org # 5.16+
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_zone_finish() and btrfs_zone_finish_endio() have similar code.
Introduce do_zone_finish() to factor out the common code.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Introduce a wrapper to check if all the space in a block group is
allocated or not.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When iterating the backrefs in an extent item if the ptr to the
'current' backref record goes beyond the extent item a warning is
generated and -ENOENT is returned. However what's more appropriate to
debug such cases would be to return EUCLEAN and also print identifying
information about the performed search as well as the current content of
the leaf containing the possibly corrupted extent item.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The bio_ctrl is the last use of bio_flags that has been converted to
compress type everywhere else.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Several functions take parameter bio_flags that was simplified to just
compress type, unify it and change the type accordingly.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The bio_flags is now used to store unchanged compress type, so unify
that.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The helpers extent_set_compress_type and extent_compress_type have
become trivial after previous cleanups and can be removed.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The bio_flags are used only to encode the compression and there are no
other EXTENT_BIO_* flags, so the compress type can be stored directly.
The struct member name is left unchanged and will be cleaned in later
patches.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The helper used to do more with the wbc state but now it's just one
subtraction, no need to have a special helper.
It became trivial in a91326679f ("Btrfs: make mapping->writeback_index
point to the last written page").
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The value of btrfs_delayed_extent_op::is_data is always false, we can
cascade the change and simplify code that depends on it, removing the
structure member eventually.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The parameter has been added in 2009 in the infamous monster commit
5d4f98a28c ("Btrfs: Mixed back reference (FORWARD ROLLING FORMAT
CHANGE)") but not used ever since. We can sink it and allow further
simplifications.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When reserving data space for a direct IO write we can end up deadlocking
if we have multiple tasks attempting a write to the same file range, there
are multiple extents covered by that file range, we are low on available
space for data and the writes don't expand the inode's i_size.
The deadlock can happen like this:
1) We have a file with an i_size of 1M, at offset 0 it has an extent with
a size of 128K and at offset 128K it has another extent also with a
size of 128K;
2) Task A does a direct IO write against file range [0, 256K), and because
the write is within the i_size boundary, it takes the inode's lock (VFS
level) in shared mode;
3) Task A locks the file range [0, 256K) at btrfs_dio_iomap_begin(), and
then gets the extent map for the extent covering the range [0, 128K).
At btrfs_get_blocks_direct_write(), it creates an ordered extent for
that file range ([0, 128K));
4) Before returning from btrfs_dio_iomap_begin(), it unlocks the file
range [0, 256K);
5) Task A executes btrfs_dio_iomap_begin() again, this time for the file
range [128K, 256K), and locks the file range [128K, 256K);
6) Task B starts a direct IO write against file range [0, 256K) as well.
It also locks the inode in shared mode, as it's within the i_size limit,
and then tries to lock file range [0, 256K). It is able to lock the
subrange [0, 128K) but then blocks waiting for the range [128K, 256K),
as it is currently locked by task A;
7) Task A enters btrfs_get_blocks_direct_write() and tries to reserve data
space. Because we are low on available free space, it triggers the
async data reclaim task, and waits for it to reserve data space;
8) The async reclaim task decides to wait for all existing ordered extents
to complete (through btrfs_wait_ordered_roots()).
It finds the ordered extent previously created by task A for the file
range [0, 128K) and waits for it to complete;
9) The ordered extent for the file range [0, 128K) can not complete
because it blocks at btrfs_finish_ordered_io() when trying to lock the
file range [0, 128K).
This results in a deadlock, because:
- task B is holding the file range [0, 128K) locked, waiting for the
range [128K, 256K) to be unlocked by task A;
- task A is holding the file range [128K, 256K) locked and it's waiting
for the async data reclaim task to satisfy its space reservation
request;
- the async data reclaim task is waiting for ordered extent [0, 128K)
to complete, but the ordered extent can not complete because the
file range [0, 128K) is currently locked by task B, which is waiting
on task A to unlock file range [128K, 256K) and task A waiting
on the async data reclaim task.
This results in a deadlock between 4 task: task A, task B, the async
data reclaim task and the task doing ordered extent completion (a work
queue task).
This type of deadlock can sporadically be triggered by the test case
generic/300 from fstests, and results in a stack trace like the following:
[12084.033689] INFO: task kworker/u16:7:123749 blocked for more than 241 seconds.
[12084.034877] Not tainted 5.18.0-rc2-btrfs-next-115 #1
[12084.035562] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[12084.036548] task:kworker/u16:7 state:D stack: 0 pid:123749 ppid: 2 flags:0x00004000
[12084.036554] Workqueue: btrfs-flush_delalloc btrfs_work_helper [btrfs]
[12084.036599] Call Trace:
[12084.036601] <TASK>
[12084.036606] __schedule+0x3cb/0xed0
[12084.036616] schedule+0x4e/0xb0
[12084.036620] btrfs_start_ordered_extent+0x109/0x1c0 [btrfs]
[12084.036651] ? prepare_to_wait_exclusive+0xc0/0xc0
[12084.036659] btrfs_run_ordered_extent_work+0x1a/0x30 [btrfs]
[12084.036688] btrfs_work_helper+0xf8/0x400 [btrfs]
[12084.036719] ? lock_is_held_type+0xe8/0x140
[12084.036727] process_one_work+0x252/0x5a0
[12084.036736] ? process_one_work+0x5a0/0x5a0
[12084.036738] worker_thread+0x52/0x3b0
[12084.036743] ? process_one_work+0x5a0/0x5a0
[12084.036745] kthread+0xf2/0x120
[12084.036747] ? kthread_complete_and_exit+0x20/0x20
[12084.036751] ret_from_fork+0x22/0x30
[12084.036765] </TASK>
[12084.036769] INFO: task kworker/u16:11:153787 blocked for more than 241 seconds.
[12084.037702] Not tainted 5.18.0-rc2-btrfs-next-115 #1
[12084.038540] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[12084.039506] task:kworker/u16:11 state:D stack: 0 pid:153787 ppid: 2 flags:0x00004000
[12084.039511] Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs]
[12084.039551] Call Trace:
[12084.039553] <TASK>
[12084.039557] __schedule+0x3cb/0xed0
[12084.039566] schedule+0x4e/0xb0
[12084.039569] schedule_timeout+0xed/0x130
[12084.039573] ? mark_held_locks+0x50/0x80
[12084.039578] ? _raw_spin_unlock_irq+0x24/0x50
[12084.039580] ? lockdep_hardirqs_on+0x7d/0x100
[12084.039585] __wait_for_common+0xaf/0x1f0
[12084.039587] ? usleep_range_state+0xb0/0xb0
[12084.039596] btrfs_wait_ordered_extents+0x3d6/0x470 [btrfs]
[12084.039636] btrfs_wait_ordered_roots+0x175/0x240 [btrfs]
[12084.039670] flush_space+0x25b/0x630 [btrfs]
[12084.039712] btrfs_async_reclaim_data_space+0x108/0x1b0 [btrfs]
[12084.039747] process_one_work+0x252/0x5a0
[12084.039756] ? process_one_work+0x5a0/0x5a0
[12084.039758] worker_thread+0x52/0x3b0
[12084.039762] ? process_one_work+0x5a0/0x5a0
[12084.039765] kthread+0xf2/0x120
[12084.039766] ? kthread_complete_and_exit+0x20/0x20
[12084.039770] ret_from_fork+0x22/0x30
[12084.039783] </TASK>
[12084.039800] INFO: task kworker/u16:17:217907 blocked for more than 241 seconds.
[12084.040709] Not tainted 5.18.0-rc2-btrfs-next-115 #1
[12084.041398] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[12084.042404] task:kworker/u16:17 state:D stack: 0 pid:217907 ppid: 2 flags:0x00004000
[12084.042411] Workqueue: btrfs-endio-write btrfs_work_helper [btrfs]
[12084.042461] Call Trace:
[12084.042463] <TASK>
[12084.042471] __schedule+0x3cb/0xed0
[12084.042485] schedule+0x4e/0xb0
[12084.042490] wait_extent_bit.constprop.0+0x1eb/0x260 [btrfs]
[12084.042539] ? prepare_to_wait_exclusive+0xc0/0xc0
[12084.042551] lock_extent_bits+0x37/0x90 [btrfs]
[12084.042601] btrfs_finish_ordered_io.isra.0+0x3fd/0x960 [btrfs]
[12084.042656] ? lock_is_held_type+0xe8/0x140
[12084.042667] btrfs_work_helper+0xf8/0x400 [btrfs]
[12084.042716] ? lock_is_held_type+0xe8/0x140
[12084.042727] process_one_work+0x252/0x5a0
[12084.042742] worker_thread+0x52/0x3b0
[12084.042750] ? process_one_work+0x5a0/0x5a0
[12084.042754] kthread+0xf2/0x120
[12084.042757] ? kthread_complete_and_exit+0x20/0x20
[12084.042763] ret_from_fork+0x22/0x30
[12084.042783] </TASK>
[12084.042798] INFO: task fio:234517 blocked for more than 241 seconds.
[12084.043598] Not tainted 5.18.0-rc2-btrfs-next-115 #1
[12084.044282] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[12084.045244] task:fio state:D stack: 0 pid:234517 ppid:234515 flags:0x00004000
[12084.045248] Call Trace:
[12084.045250] <TASK>
[12084.045254] __schedule+0x3cb/0xed0
[12084.045263] schedule+0x4e/0xb0
[12084.045266] wait_extent_bit.constprop.0+0x1eb/0x260 [btrfs]
[12084.045298] ? prepare_to_wait_exclusive+0xc0/0xc0
[12084.045306] lock_extent_bits+0x37/0x90 [btrfs]
[12084.045336] btrfs_dio_iomap_begin+0x336/0xc60 [btrfs]
[12084.045370] ? lock_is_held_type+0xe8/0x140
[12084.045378] iomap_iter+0x184/0x4c0
[12084.045383] __iomap_dio_rw+0x2c6/0x8a0
[12084.045406] iomap_dio_rw+0xa/0x30
[12084.045408] btrfs_do_write_iter+0x370/0x5e0 [btrfs]
[12084.045440] aio_write+0xfa/0x2c0
[12084.045448] ? __might_fault+0x2a/0x70
[12084.045451] ? kvm_sched_clock_read+0x14/0x40
[12084.045455] ? lock_release+0x153/0x4a0
[12084.045463] io_submit_one+0x615/0x9f0
[12084.045467] ? __might_fault+0x2a/0x70
[12084.045469] ? kvm_sched_clock_read+0x14/0x40
[12084.045478] __x64_sys_io_submit+0x83/0x160
[12084.045483] ? syscall_enter_from_user_mode+0x1d/0x50
[12084.045489] do_syscall_64+0x3b/0x90
[12084.045517] entry_SYSCALL_64_after_hwframe+0x44/0xae
[12084.045521] RIP: 0033:0x7fa76511af79
[12084.045525] RSP: 002b:00007ffd6d6b9058 EFLAGS: 00000246 ORIG_RAX: 00000000000000d1
[12084.045530] RAX: ffffffffffffffda RBX: 00007fa75ba6e760 RCX: 00007fa76511af79
[12084.045532] RDX: 0000557b304ff3f0 RSI: 0000000000000001 RDI: 00007fa75ba4c000
[12084.045535] RBP: 00007fa75ba4c000 R08: 00007fa751b76000 R09: 0000000000000330
[12084.045537] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
[12084.045540] R13: 0000000000000000 R14: 0000557b304ff3f0 R15: 0000557b30521eb0
[12084.045561] </TASK>
Fix this issue by always reserving data space before locking a file range
at btrfs_dio_iomap_begin(). If we can't reserve the space, then we don't
error out immediately - instead after locking the file range, check if we
can do a NOCOW write, and if we can we don't error out since we don't need
to allocate a data extent, however if we can't NOCOW then error out with
-ENOSPC. This also implies that we may end up reserving space when it's
not needed because the write will end up being done in NOCOW mode - in that
case we just release the space after we noticed we did a NOCOW write - this
is the same type of logic that is done in the path for buffered IO writes.
Fixes: f0bfa76a11 ("btrfs: fix ENOSPC failure when attempting direct IO write into NOCOW range")
CC: stable@vger.kernel.org # 5.17+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Derive the compression type from extent map as opposed to the bio flags
passed. This makes it more precise and not reliant on function
parameters.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[SUSPICIOUS CODE]
When refactoring scrub code, I noticed a very strange behavior around
scrub_remap_extent():
if (sctx->is_dev_replace)
scrub_remap_extent(fs_info, cur_logical, scrub_len,
&cur_physical, &target_dev, &cur_mirror);
As replace target is a 1:1 copy of the source device, thus physical
offset inside the target should be the same as physical inside source,
thus this remap call makes no sense to me.
[REAL FUNCTIONALITY]
After more investigation, the function name scrub_remap_extent()
doesn't tell anything of the truth, nor does its if () condition.
The real story behind this function is that, for scrub_pages() we never
expect missing device, even for replacing missing device.
What scrub_remap_extent() is really doing is to find a live mirror, and
make later scrub_pages() to read data from the good copy, other than
from the missing device and increase error counters unnecessarily.
[IMPROVEMENT]
We have no need to bother scrub_remap_extent() in scrub_simple_mirror()
at all, we only need to call it before we call scrub_pages().
And rename the function to scrub_find_live_copy(), add extra comments on
them.
By this we can remove one parameter from scrub_extent(), and reduce the
unnecessary calls to scrub_remap_extent() for regular replace.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since we have find_first_extent_item() to iterate the extent items of a
certain range, there is no need to use the open-coded version.
Replace the final scrub call site with find_first_extent_item().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently scrub_raid56_parity() has a large double loop, handling the
following things at the same time:
- Iterate each data stripe
- Iterate each extent item in one data stripe
Refactor this by:
- Introduce a new helper to handle data stripe iteration
The new helper is scrub_raid56_data_stripe_for_parity(), which
only has one while() loop handling the extent items inside the
data stripe.
The code is still mostly the same as the old code.
- Call cond_resched() for each extent
Previously we only call cond_resched() under a complex if () check.
I see no special reason to do that, and for other scrub functions,
like scrub_simple_mirror() we're already doing the same cond_resched()
after scrubbing one extent.
- Add more comments
Please note that, this patch is only to address the double loop, there
are incoming patches to do extra cleanup.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Although RAID56 has complex repair mechanism, which involves reading the
whole full stripe, but inside one data stripe, it's in fact no different
than SINGLE/RAID1.
The point here is, for data stripe we just check the csum for each
extent we hit. Only for csum mismatch case, our repair paths divide.
So we can still reuse scrub_simple_mirror() for RAID56 data stripes,
which saves quite some code.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since we have moved all other profiles handling into their own
functions, now the main body of scrub_stripe() is just handling RAID56
profiles.
There is no need to address other profiles in the main loop of
scrub_stripe(), so we can remove those dead branches.
Since we're here, also slightly change the timing of initialization of
variables like @offset, @increment and @logical.
Especially for @logical, we don't really need to initialize it for
btrfs_extent_root()/btrfs_csum_root(), we can use bg->start for that
purpose.
Now those variables are only initialize for RAID56 branches.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The new entrance will iterate through each data stripe which belongs to
the target device.
And since inside each data stripe, RAID0 is just SINGLE, while RAID10 is
just RAID1, we can reuse scrub_simple_mirror() to do the scrub properly.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The new helper, scrub_simple_mirror(), will scrub all extents inside a
range which only has simple mirror based duplication.
This covers every range of SINGLE/DUP/RAID1/RAID1C*, and inside each
data stripe for RAID0/RAID10.
Currently we will use this function to scrub SINGLE/DUP/RAID1/RAID1C*
profiles. As one can see, the new entrance for those simple-mirror
based profiles can be small enough (with comments, just reach 100
lines).
This function will be the basis for the incoming scrub refactor.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The new helper, find_first_extent_item(), will locate an extent item
(either EXTENT_ITEM or METADATA_ITEM) which covers any byte of the
search range.
This helper will later be used to refactor scrub code.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The variable @physical_end is the exclusive stripe end, currently it's
calculated using @physical + @dev_extent_len / map->stripe_len *
map->stripe_len.
And since at allocation time we ensured dev_extent_len is stripe_len
aligned, the result is the same as @physical + @dev_extent_len.
So this patch will just assign @physical and @physical_end early,
without using @nstripes.
This is especially helpful for any possible out: label user, as now we
only need to initialize @offset before going to out: label.
Since we're here, also make @physical_end constant.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
… rename it to simply fs_roots and adjust all usages of this object to use
the XArray API, because it is notionally easier to use and understand, as
it provides array semantics, and also takes care of locking for us,
further simplifying the code.
Also do some refactoring, esp. where the API change requires largely
rewriting some functions, anyway.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Gabriel Niebler <gniebler@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
… named 'extent_buffers'. Also adjust all usages of this object to use
the XArray API, which greatly simplifies the code as it takes care of
locking and is generally easier to use and understand, providing
notionally simpler array semantics.
Also perform some light refactoring.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Gabriel Niebler <gniebler@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
… and adjust all usages of this object to use the XArray API for the sake
of consistency.
XArray API provides array semantics, so it is notionally easier to use and
understand, and it also takes care of locking for us.
None of this makes a real difference in this particular patch, but it does
in other places where similar replacements are or have been made and we
want to be consistent in our usage of data structures in btrfs.
Signed-off-by: Gabriel Niebler <gniebler@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
… in the btrfs_root struct and adjust all usages of this object to use
the XArray API, because it is notionally easier to use and understand,
as it provides array semantics, and also takes care of locking for us,
further simplifying the code.
Also use the opportunity to do some light refactoring.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Gabriel Niebler <gniebler@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In function btrfs_bg_flags_to_raid_index(), we use quite some if () to
convert the BTRFS_BLOCK_GROUP_* bits to a index number.
But the truth is, there is really no such need for so many branches at
all.
Since all BTRFS_BLOCK_GROUP_* flags are just one single bit set inside
BTRFS_BLOCK_GROUP_PROFILES_MASK, we can easily use ilog2() to calculate
their values.
This calculation has an anchor point, the lowest PROFILE bit, which is
RAID0.
Even it's fixed on-disk format and should never change, here I added
extra compile time checks to make it super safe:
1. Make sure RAID0 is always the lowest bit in PROFILE_MASK
This is done by finding the first (least significant) bit set of
RAID0 and PROFILE_MASK & ~RAID0.
2. Make sure RAID0 bit set beyond the highest bit of TYPE_MASK
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's only internally used as another way to represent btrfs profiles,
it's not exposed through any on-disk format, in fact this
btrfs_raid_types is diverted from the on-disk format values.
Furthermore, since it's internal structure, its definition can change in
the future.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
rmw_workers doesn't need ordered execution or thread disabling threshold
(as the thresh parameter is less than DFT_THRESHOLD).
Just switch to the normal workqueues that use a lot less resources,
especially in the work_struct vs btrfs_work structures.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All three scrub workqueues don't need ordered execution or thread
disabling threshold (as the thresh parameter is less than DFT_THRESHOLD).
Just switch to the normal workqueues that use a lot less resources,
especially in the work_struct vs btrfs_work structures.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Just let the one caller that wants optional WQ_HIGHPRI handling allocate
a separate btrfs_workqueue for that. This allows to rename struct
__btrfs_workqueue to btrfs_workqueue, remove a pointer indirection and
separate allocation for all btrfs_workqueue users and generally simplify
the code.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now the btrfs RAID56 infrastructure has migrated to use sector_ptr
interface, it should be safe to enable subpage support for RAID56.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The non-compatible part is only the bitmap iteration part, now the
bitmap size is extended to rbio::stripe_nsectors, not the old
rbio::stripe_npages.
Since we're here, also slightly improve the function by:
- Rename @i to @stripe
- Rename @bit to @sectornr
- Move @page and @index into the inner loop
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Function steal_rbio() will take all the uptodate pages from the source
rbio to destination rbio.
With the new stripe_sectors[] array, we also need to do the extra check:
- Check sector::flags to make sure the full page is uptodate
Now we don't use PageUptodate flag for subpage cases to indicate
if the page is uptodate.
Instead we need to check all the sectors belong to the page to be sure
about whether it's full page uptodate.
So here we introduce a new helper, full_page_sectors_uptodate() to do
the check.
- Update rbio::stripe_sectors[] to use the new page pointer
We only need to change the page pointer, no need to change anything
else.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Unlike previous code, we can not directly set PageUptodate for stripe
pages now. Instead we have to iterate through all the sectors and set
SECTOR_UPTODATE flag there.
Introduce a new helper find_stripe_sector(), to do the work.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The functionality is completely replaced by the new bio_sectors member,
now it's time to remove the old member.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This requires one extra parameter @pgoff for the function.
In the current code base, scrub is still one page per sector, thus the
new parameter will always be 0.
It needs the extra subpage scrub optimization code to fully take
advantage.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is only one caller for that helper now, and we're definitely fine
to open-code it.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With this function converted to subpage compatible sector interfaces,
the following helper functions can be removed:
- rbio_stripe_page()
- rbio_pstripe_page()
- rbio_qstripe_page()
- page_in_rbio()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This involves:
- Use sector_ptr interface to grab the pointers
- Add sector->pgoff to pointers[]
- Rebuild data using sectorsize instead of PAGE_SIZE
- Use memcpy() to replace copy_page()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The core is to convert direct page usage into sector_ptr usage, and
use memcpy() to replace copy_page().
For pointers usage, we need to convert it to kmap_local_page() +
sector->pgoff.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Make rbio_add_io_page() subpage compatible, which involves:
- Rename rbio_add_io_page() to rbio_add_io_sector()
Although we still rely on PAGE_SIZE == sectorsize, so add a new
ASSERT() inside rbio_add_io_sector() to make sure all pgoff is 0.
- Introduce rbio_stripe_sector() helper
The equivalent of rbio_stripe_page().
This new helper has extra ASSERT()s to validate the stripe and sector
number.
- Introduce sector_in_rbio() helper
The equivalent of page_in_rbio().
- Rename @pagenr variables to @sectornr
- Use rbio::stripe_nsectors when iterating the bitmap
Please note that, this only changes the interface, the bios are still
using full page for IO.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This new member is going to fully replace bio_pages in the future, but
for now let's keep them co-exist, until the full switch is done.
Currently cache_rbio_pages() and index_rbio_pages() will also populate
the new array.
And cache_rbio_pages() need to record which sectors are uptodate, so we
also need to introduce sector_ptr::uptodate bit.
To avoid extra memory usage, we let the new @uptodate bit to share bits
with @pgoff. Now pgoff only has at most 31 bits, which is already more
than enough, as even for 256K page size, we only need 18 bits.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The new member is an array of sector_ptr pointers, they will represent
all sectors inside a full stripe (including P/Q).
They co-operate with btrfs_raid_bio::stripe_pages:
stripe_pages: | Page 0, range [0, 64K) | Page 1 ...
stripe_sectors: | | | ... | |
| | \- sector 15, page 0, pgoff=60K
| \- sector 1, page 0, pgoff=4K
\---- sector 0, page 0, pfoff=0
With such structure, we can represent subpage sectors without using
extra pages.
Here we introduce a new helper, index_stripe_sectors(), to update
stripe_sectors[] to point to correct page and pgoff.
So every time rbio::stripe_pages[] pointer gets updated, the new helper
should be called.
The following functions have to call the new helper:
- steal_rbio()
- alloc_rbio_pages()
- alloc_rbio_parity_pages()
- alloc_rbio_essential_pages()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The new members are all related to number of sectors, but the existing
number of pages members are kept as is:
- nr_sectors
Total sectors of the full stripe including P/Q.
- stripe_nsectors
The sectors of a single stripe.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are a lot of members using much larger type in btrfs_raid_bio than
necessary, like nr_pages which represents the total number of a full
stripe.
Instead of int (which is at least 32bits), u16 is already enough
(max stripe length will be 256MiB, already beyond current RAID56 device
number limit).
So this patch will reduce the width of the following members:
- stripe_len to u32
- nr_pages to u16
- nr_data to u8
- real_stripes to u8
- scrubp to u8
- faila/b to s8
As -1 is used to indicate no corruption
This will slightly reduce the size of btrfs_raid_bio from 272 bytes to
256 bytes, reducing 16 bytes usage.
But please note that, when using btrfs_raid_bio, we allocate extra space
for it to cover various pointer array, so the reduce memory is not
really a big saving overall.
As we're here modifying the comments already, update existing comments
to current code standard.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function rbio_nr_pages() is only called once inside alloc_rbio(),
there is no reason to make it dedicated helper.
Furthermore, the return type doesn't match, the function return "unsigned
long" which may not be necessary, while the only caller only uses "int".
Since we're doing cleaning up here, also fix the type to "const unsigned
int" for all involved local variables.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently btrfs uses fixed stripe length (64K), thus u32 is wide enough
for the usage.
Furthermore, even in the future we choose to enlarge stripe length to
larger values, I don't believe we would want stripe as large as 4G or
larger.
So this patch will reduce the width for all in-memory structures and
parameters, this involves:
- RAID56 related function argument lists
This allows us to do direct division related to stripe_len.
Although we will use bits shift to replace the division anyway.
- btrfs_io_geometry structure
This involves one change to simplify the calculation of both @stripe_nr
and @stripe_offset, using div64_u64_rem().
And add extra sanity check to make sure @stripe_offset is always small
enough for u32.
This saves 8 bytes for the structure.
- map_lookup structure
This convert @stripe_len to u32, which saves 8 bytes. (saved 4 bytes,
and removed a 4-bytes hole)
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Both btrfs_repair_one_sector and submit_bio_one as the direct caller of
one of the instances ignore errors as they expect the methods themselves
to call ->bi_end_io on error. Remove the unused and dangerous return
value.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_submit_compressed_read already calls ->bi_end_io on error and
the caller must ignore the return value, so remove it.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_submit_metadata_bio already calls ->bi_end_io on error and the
caller must ignore the return value, so remove it.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This argument is unused since commit 953651eb30 ("btrfs: factor out
helper adding a page to bio") and commit 1b36294a6c ("btrfs: call
submit_bio_hook directly for metadata pages") reworked the way metadata
bio submission is handled.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Keep btrfs_readpage next to btrfs_do_readpage and the other address
space operations. This allows to keep submit_one_bio and
struct btrfs_bio_ctrl file local in extent_io.c.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
There is a report that a btrfs has a bad super block num devices.
This makes btrfs to reject the fs completely.
BTRFS error (device sdd3): super_num_devices 3 mismatch with num_devices 2 found here
BTRFS error (device sdd3): failed to read chunk tree: -22
BTRFS error (device sdd3): open_ctree failed
[CAUSE]
During btrfs device removal, chunk tree and super block num devs are
updated in two different transactions:
btrfs_rm_device()
|- btrfs_rm_dev_item(device)
| |- trans = btrfs_start_transaction()
| | Now we got transaction X
| |
| |- btrfs_del_item()
| | Now device item is removed from chunk tree
| |
| |- btrfs_commit_transaction()
| Transaction X got committed, super num devs untouched,
| but device item removed from chunk tree.
| (AKA, super num devs is already incorrect)
|
|- cur_devices->num_devices--;
|- cur_devices->total_devices--;
|- btrfs_set_super_num_devices()
All those operations are not in transaction X, thus it will
only be written back to disk in next transaction.
So after the transaction X in btrfs_rm_dev_item() committed, but before
transaction X+1 (which can be minutes away), a power loss happen, then
we got the super num mismatch.
This has been fixed by commit bbac58698a ("btrfs: remove device item
and update super block in the same transaction").
[FIX]
Make the super_num_devices check less strict, converting it from a hard
error to a warning, and reset the value to a correct one for the current
or next transaction commit.
As the number of device items is the critical information where the
super block num_devices is only a cached value (and also useful for
cross checking), it's safe to automatically update it. Other device
related problems like missing device are handled after that and may
require other means to resolve, like degraded mount. With this fix,
potentially affected filesystems won't fail mount and require the manual
repair by btrfs check.
Reported-by: Luca Béla Palkovics <luca.bela.palkovics@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CA+8xDSpvdm_U0QLBAnrH=zqDq_cWCOH5TiV46CKmp3igr44okQ@mail.gmail.com/
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Parameter struct compressed_bio is not used by the function
submit_compressed_bio(). Remove it.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When doing a NOCOW write, either through direct IO or buffered IO, we do
two lookups for the block group that contains the target extent: once
when we call btrfs_inc_nocow_writers() and then later again when we call
btrfs_dec_nocow_writers() after creating the ordered extent.
The lookups require taking a lock and navigating the red black tree used
to track all block groups, which can take a non-negligible amount of time
for a large filesystem with thousands of block groups, as well as lock
contention and cache line bouncing.
Improve on this by having a single block group search: making
btrfs_inc_nocow_writers() return the block group to its caller and then
have the caller pass that block group to btrfs_dec_nocow_writers().
This is part of a patchset comprised of the following patches:
btrfs: remove search start argument from first_logical_byte()
btrfs: use rbtree with leftmost node cached for tracking lowest block group
btrfs: use a read/write lock for protecting the block groups tree
btrfs: return block group directly at btrfs_next_block_group()
btrfs: avoid double search for block group during NOCOW writes
The following test was used to test these changes from a performance
perspective:
$ cat test.sh
#!/bin/bash
modprobe null_blk nr_devices=0
NULL_DEV_PATH=/sys/kernel/config/nullb/nullb0
mkdir $NULL_DEV_PATH
if [ $? -ne 0 ]; then
echo "Failed to create nullb0 directory."
exit 1
fi
echo 2 > $NULL_DEV_PATH/submit_queues
echo 16384 > $NULL_DEV_PATH/size # 16G
echo 1 > $NULL_DEV_PATH/memory_backed
echo 1 > $NULL_DEV_PATH/power
DEV=/dev/nullb0
MNT=/mnt/nullb0
LOOP_MNT="$MNT/loop"
MOUNT_OPTIONS="-o ssd -o nodatacow"
MKFS_OPTIONS="-R free-space-tree -O no-holes"
cat <<EOF > /tmp/fio-job.ini
[io_uring_writes]
rw=randwrite
fsync=0
fallocate=posix
group_reporting=1
direct=1
ioengine=io_uring
iodepth=64
bs=64k
filesize=1g
runtime=300
time_based
directory=$LOOP_MNT
numjobs=8
thread
EOF
echo performance | \
tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
echo
echo "Using config:"
echo
cat /tmp/fio-job.ini
echo
umount $MNT &> /dev/null
mkfs.btrfs -f $MKFS_OPTIONS $DEV &> /dev/null
mount $MOUNT_OPTIONS $DEV $MNT
mkdir $LOOP_MNT
truncate -s 4T $MNT/loopfile
mkfs.btrfs -f $MKFS_OPTIONS $MNT/loopfile &> /dev/null
mount $MOUNT_OPTIONS $MNT/loopfile $LOOP_MNT
# Trigger the allocation of about 3500 data block groups, without
# actually consuming space on underlying filesystem, just to make
# the tree of block group large.
fallocate -l 3500G $LOOP_MNT/filler
fio /tmp/fio-job.ini
umount $LOOP_MNT
umount $MNT
echo 0 > $NULL_DEV_PATH/power
rmdir $NULL_DEV_PATH
The test was run on a non-debug kernel (Debian's default kernel config),
the result were the following.
Before patchset:
WRITE: bw=1455MiB/s (1526MB/s), 1455MiB/s-1455MiB/s (1526MB/s-1526MB/s), io=426GiB (458GB), run=300006-300006msec
After patchset:
WRITE: bw=1503MiB/s (1577MB/s), 1503MiB/s-1503MiB/s (1577MB/s-1577MB/s), io=440GiB (473GB), run=300006-300006msec
+3.3% write throughput and +3.3% IO done in the same time period.
The test has somewhat limited coverage scope, as with only NOCOW writes
we get less contention on the red black tree of block groups, since we
don't have the extra contention caused by COW writes, namely when
allocating data extents, pinning and unpinning data extents, but on the
hand there's access to tree in the NOCOW path, when incrementing a block
group's number of NOCOW writers.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_next_block_group(), we have this long line with two statements:
cache = btrfs_lookup_first_block_group(...); return cache;
This makes it a bit harder to read due to two statements on the same
line, so change that to directly return the result of the call to
btrfs_lookup_first_block_group().
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we use a spin lock to protect the red black tree that we use to
track block groups. Most accesses to that tree are actually read only and
for large filesystems, with thousands of block groups, it actually has
a bad impact on performance, as concurrent read only searches on the tree
are serialized.
Read only searches on the tree are very frequent and done when:
1) Pinning and unpinning extents, as we need to lookup the respective
block group from the tree;
2) Freeing the last reference of a tree block, regardless if we pin the
underlying extent or add it back to free space cache/tree;
3) During NOCOW writes, both buffered IO and direct IO, we need to check
if the block group that contains an extent is read only or not and to
increment the number of NOCOW writers in the block group. For those
operations we need to search for the block group in the tree.
Similarly, after creating the ordered extent for the NOCOW write, we
need to decrement the number of NOCOW writers from the same block
group, which requires searching for it in the tree;
4) Decreasing the number of extent reservations in a block group;
5) When allocating extents and freeing reserved extents;
6) Adding and removing free space to the free space tree;
7) When releasing delalloc bytes during ordered extent completion;
8) When relocating a block group;
9) During fitrim, to iterate over the block groups;
10) etc;
Write accesses to the tree, to add or remove block groups, are much less
frequent as they happen only when allocating a new block group or when
deleting a block group.
We also use the same spin lock to protect the list of currently caching
block groups. Additions to this list are made when we need to cache a
block group, because we don't have a free space cache for it (or we have
but it's invalid), and removals from this list are done when caching of
the block group's free space finishes. These cases are also not very
common, but when they happen, they happen only once when the filesystem
is mounted.
So switch the lock that protects the tree of block groups from a spinning
lock to a read/write lock.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We keep track of the start offset of the block group with the lowest start
offset at fs_info->first_logical_byte. This requires explicitly updating
that field every time we add, delete or lookup a block group to/from the
red black tree at fs_info->block_group_cache_tree.
Since the block group with the lowest start address happens to always be
the one that is the leftmost node of the tree, we can use a red black tree
that caches the left most node. Then when we need the start address of
that block group, we can just quickly get the leftmost node in the tree
and extract the start offset of that node's block group. This avoids the
need to explicitly keep track of that address in the dedicated member
fs_info->first_logical_byte, and it also allows the next patch in the
series to switch the lock that protects the red black tree from a spin
lock to a read/write lock - without this change it would be tricky
because block group searches also update fs_info->first_logical_byte.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The search start argument passed to first_logical_byte() is always 0, as
we always want to get the logical start address of the block group with
the lowest logical start address. So remove it, as not only it is not
necessary, it also makes the following patches that change the lock that
protects the red black tree of block groups from a spin lock to a
read/write lock.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
If we hit an error from submit_extent_page() inside
__extent_writepage_io(), we could still return 0 to the caller, and
even trigger the warning in btrfs_page_assert_not_dirty().
[CAUSE]
In __extent_writepage_io(), if we hit an error from
submit_extent_page(), we will just clean up the range and continue.
This is completely fine for regular PAGE_SIZE == sectorsize, as we can
only hit one sector in one page, thus after the error we're ensured to
exit and @ret will be saved.
But for subpage case, we may have other dirty subpage range in the page,
and in the next loop, we may succeeded submitting the next range.
In that case, @ret will be overwritten, and we return 0 to the caller,
while we have hit some error.
[FIX]
Introduce @has_error and @saved_ret to record the first error we hit, so
we will never forget what error we hit.
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Test case generic/475 have a very high chance (almost 100%) to hit a fs
hang, where a data page will never be unlocked and hang all later
operations.
[CAUSE]
In btrfs_do_readpage(), if we hit an error from submit_extent_page() we
will try to do the cleanup for our current io range, and exit.
This works fine for PAGE_SIZE == sectorsize cases, but not for subpage.
For subpage btrfs_do_readpage() will lock the full page first, which can
contain several different sectors and extents:
btrfs_do_readpage()
|- begin_page_read()
| |- btrfs_subpage_start_reader();
| Now the page will have PAGE_SIZE / sectorsize reader pending,
| and the page is locked.
|
|- end_page_read() for different branches
| This function will reduce subpage readers, and when readers
| reach 0, it will unlock the page.
But when submit_extent_page() failed, we only cleanup the current
io range, while the remaining io range will never be cleaned up, and the
page remains locked forever.
[FIX]
Update the error handling of submit_extent_page() to cleanup all the
remaining subpage range before exiting the loop.
Please note that, now submit_extent_page() can only fail due to
sanity check in alloc_new_bio().
Thus regular IO errors are impossible to trigger the error path.
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When running generic/475 with 64K page size and 4K sector size, it has a
very high chance (almost 100%) to hang, with mostly data page locked but
no one is going to unlock it.
[CAUSE]
With commit 1784b7d502 ("btrfs: handle csum lookup errors properly on
reads"), if we failed to lookup checksum due to metadata IO error, we
will return error for btrfs_submit_data_bio().
This will cause the page to be unlocked twice in btrfs_do_readpage():
btrfs_do_readpage()
|- submit_extent_page()
| |- submit_one_bio()
| |- btrfs_submit_data_bio()
| |- if (ret) {
| |- bio->bi_status = ret;
| |- bio_endio(bio); }
| In the endio function, we will call end_page_read()
| and unlock_extent() to cleanup the subpage range.
|
|- if (ret) {
|- unlock_extent(); end_page_read() }
Here we unlock the extent and cleanup the subpage range
again.
For unlock_extent(), it's mostly double unlock safe.
But for end_page_read(), it's not, especially for subpage case,
as for subpage case we will call btrfs_subpage_end_reader() to reduce
the reader number, and use that to number to determine if we need to
unlock the full page.
If double accounted, it can underflow the number and leave the page
locked without anyone to unlock it.
[FIX]
The commit 1784b7d502 ("btrfs: handle csum lookup errors properly on
reads") itself is completely fine, it's our existing code not properly
handling the error from bio submission hook properly.
This patch will make submit_one_bio() to return void so that the callers
will never be able to do cleanup when bio submission hook fails.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is an optimization for fix fee13fe965 ("btrfs: correct zstd
workspace manager lock to use spin_lock_bh()")
The critical region for wsm.lock is only accessed by the process context and
the softirq context.
Because in the soft interrupt, the critical section will not be
preempted by the soft interrupt again, there is no need to call
spin_lock_bh(&wsm.lock) to turn off the soft interrupt,
spin_lock(&wsm.lock) is enough for this situation.
Signed-off-by: Schspa Shi <schspa@gmail.com>
[ minor comment update ]
Signed-off-by: David Sterba <dsterba@suse.com>
We are still using the magic value of 2 at btrfs_create_new_inode(), but
there's now a constant for that, named BTRFS_DIR_START_INDEX, which was
introduced in commit 528ee69712 ("btrfs: put initial index value of a
directory in a constant"). So change that to use the constant.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Cleanup the function submit_read_repair() by:
- Remove the fixed argument submit_bio_hook()
The function is only called on buffered data read path, so the
@submit_bio_hook argument is always btrfs_submit_data_bio().
Since it's fixed, then there is no need to pass that argument at all.
- Rename the function to submit_data_read_repair()
Just to be more explicit on all the 3 things, data, read and repair.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Vasily Averin
Gao Xiang