Add support for the interrupt controller found in the JZ4760 SoC, which
works exactly like the one in the JZ4770.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210307172014.73481-2-paul@crapouillou.net
Implementing CONFIG_GENERIC_IRQ_MULTI_HANDLER is a decision that is
made at the architecture level, and shouldn't involve the irqchip
at all (we even provide a fallback helper when the option isn't
selected).
Drop all instances of such selection from non-arch code.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210217142800.2547737-1-maz@kernel.org
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Hector Martin <marcan@marcan.st>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
- New driver for the MIPS-based Realtek RTL838x/RTL839x SoC
- Conversion of the sun6i-r support code to a hierarchical setup
- Fix wake-up interrupts for the ls-extirq driver
- Fix MSI allocation for the loongson-pch-msi driver
- Add compatible strings for new Qualcomm SoCs
- Tidy up a few Kconfig entries (IMX, CSKY)
- Spelling phyksiz
- Remove the sirfsoc and tango drivers
-----BEGIN PGP SIGNATURE-----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=hhRV
-----END PGP SIGNATURE-----
Merge tag 'irqchip-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier
- New driver for the MIPS-based Realtek RTL838x/RTL839x SoC
- Conversion of the sun6i-r support code to a hierarchical setup
- Fix wake-up interrupts for the ls-extirq driver
- Fix MSI allocation for the loongson-pch-msi driver
- Add compatible strings for new Qualcomm SoCs
- Tidy up a few Kconfig entries (IMX, CSKY)
- Spelling phyksiz
- Remove the sirfsoc and tango drivers
Link: https://lore.kernel.org/r/20210214124015.3333457-1-maz@kernel.org
Merely enabling CONFIG_COMPILE_TEST should not enable additional code.
To fix this, restrict the automatic enabling of IMX_INTMUX to ARCH_MXC,
and ask the user in case of compile-testing.
Fixes: 66968d7dfc ("irqchip: Add COMPILE_TEST support for IMX_INTMUX")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210208145605.422943-1-geert+renesas@glider.be
Currently we use bitmap_alloc() to allocate msi bitmap which should be
initialized with zero. This is obviously wrong but it works because msi
can fallback to legacy interrupt mode. So use bitmap_zalloc() instead.
Fixes: 632dcc2c75 ("irqchip: Add Loongson PCH MSI controller")
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210209071051.2078435-1-chenhuacai@loongson.cn
The irq-csky-mpintc driver is only supported on CPU_CK860 and
it will generate a compilation error when selected with CPU_CK610.
As it is already selected directly in the architecture Kconfig,
drop the option to select it manually.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
[maz: rewrote commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210204074609.3553018-1-guoren@kernel.org
This is a standard IRQ driver with only status and mask registers.
The mapping from SoC interrupts (18-31) to MIPS core interrupts is
done via an interrupt-map in device tree.
Signed-off-by: Bert Vermeulen <bert@biot.com>
Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>
Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210122204224.509124-3-bert@biot.com
The ls-extirq driver doesn't implement the irq_set_wake()
callback, while being wake-up capable. This results in
ugly behaviours across suspend/resume cycles.
Advertise this by adding IRQCHIP_SKIP_SET_WAKE to
the irqchip flags
Fixes: b16a1caf46 ("irqchip/ls-extirq: Add LS1043A, LS1088A external interrupt support")
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210129095034.33821-1-biwen.li@oss.nxp.com
Maintain bitmaps of wake-enabled IRQs and mux inputs, and program them
to the hardware during the syscore phase of suspend and shutdown. Then
restore the original set of enabled IRQs (only the NMI) during resume.
This serves two purposes. First, it lets power management firmware
running on the ARISC coprocessor know which wakeup sources Linux wants
to have enabled. That way, it can avoid turning them off when it shuts
down the remainder of the clock tree. Second, it preconfigures the
coprocessor's interrupt controller, so the firmware's wakeup logic
is as simple as waiting for an interrupt to arrive.
The suspend/resume logic is not conditional on PM_SLEEP because it is
identical to the init/shutdown logic. Wake IRQs may be enabled during
shutdown to allow powering the board back on. As an example, see
commit a5c5e50cce ("Input: gpio-keys - add shutdown callback").
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210118055040.21910-5-samuel@sholland.org
The R_INTC in the A31 and newer sun8i/sun50i SoCs is more similar to the
original sun4i interrupt controller than the sun7i/sun9i NMI controller.
It is used for two distinct purposes:
- To control the trigger, latch, and mask for the NMI input pin
- To provide the interrupt input for the ARISC coprocessor
As this interrupt controller is not documented, information about it
comes from vendor-provided firmware blobs and from experimentation.
Differences from the sun4i interrupt controller appear to be:
- It only has one or two registers of each kind (max 32 or 64 IRQs)
- Multiplexing logic is added to support additional inputs
- There is no FIQ-related logic
- There is no interrupt priority logic
In order to fulfill its two purposes, this hardware block combines four
types of IRQs. First, the NMI pin is routed to the "IRQ 0" input on this
chip, with a trigger type controlled by the NMI_CTRL_REG. The "IRQ 0
pending" output from this chip, if enabled, is then routed to a SPI IRQ
input on the GIC. In other words, bit 0 of IRQ_ENABLE_REG *does* affect
the NMI IRQ seen at the GIC.
The NMI is followed by a contiguous block of 15 "direct" (my name for
them) IRQ inputs that are connected in parallel to both R_INTC and the
GIC. Or in other words, these bits of IRQ_ENABLE_REG *do not* affect the
IRQs seen at the GIC.
Following the direct IRQs are the ARISC's copy of banked IRQs for shared
peripherals. These are not relevant to Linux. The remaining IRQs are
connected to a multiplexer and provide access to the first (up to) 128
SPIs from the ARISC. This range of SPIs overlaps with the direct IRQs.
Because of the 1:1 correspondence between R_INTC and GIC inputs, this is
a perfect scenario for using a stacked irqchip driver. We want to hook
into setting the NMI trigger type, but not actually handle any IRQ here.
To allow access to all multiplexed IRQs, this driver requires a new
binding where the interrupt number matches the GIC interrupt number.
(This moves the NMI from number 0 to 32 or 96, depending on the SoC.)
For simplicity, copy the three-cell GIC binding; this disambiguates
interrupt 0 in the old binding (the NMI) from interrupt 0 in the new
binding (SPI 0) by the number of cells.
Since R_INTC is in the always-on power domain, and its output is visible
to the power management coprocessor, a stacked irqchip driver provides a
simple way to add wakeup support to any of its IRQs. That is the next
patch; for now, just the NMI is moved over.
This commit mostly reverts commit 173bda53b3 ("irqchip/sunxi-nmi:
Support sun6i-a31-r-intc compatible").
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210118055040.21910-4-samuel@sholland.org
The GICv3 driver explanation related to PMR/RPR and SCR_EL3.FIQ
secure/non-secure priority handling contains a couple of typos.
Fix them.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210121182252.29320-1-lorenzo.pieralisi@arm.com
The CSR SiRF prima2/atlas platforms are getting removed, so this driver
is no longer needed.
Cc: Barry Song <baohua@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Barry Song <baohua@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210120133008.2421897-3-arnd@kernel.org
The tango platform is getting removed, so the driver is no
longer needed.
Cc: Marc Gonzalez <marc.w.gonzalez@free.fr>
Cc: Mans Rullgard <mans@mansr.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210120133008.2421897-2-arnd@kernel.org
Since commit 5556797662 ("genirq/irqdomain: Allow partial trimming of
irq_data hierarchy") the irq_data chain is valided.
The irq_domain_trim_hierarchy() function doesn't consider the irq + ipi
domain hierarchy as valid, since the ipi domain has the irq domain set
as parent, but the parent domain has no chip set. Hence the boot ends in
a kernel panic.
Set the chip for the parent domain as it is done in the mips gic irq
driver, to have a valid irq_data chain.
Fixes: 3838a547fd ("irqchip: mips-cpu: Introduce IPI IRQ domain support")
Cc: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210107213603.1637781-1-dev@kresin.me
The TI PRUSS INTC irqchip driver handles the local interrupt controller
which is a child device of it's parent PRUSS/ICSSG device. The driver
was upstreamed in parallel with the PRUSS platform driver, and was
configurable independently previously. The PRUSS interrupt controller
is an integral part of the overall PRUSS software architecture, and is
not useful at all by itself.
Simplify the TI_PRUSS_INTC Kconfig dependencies by making it silent and
selected automatically when the TI_PRUSS platform driver is enabled.
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210108162901.6003-1-s-anna@ti.com
* PSCI relay at EL2 when "protected KVM" is enabled
* New exception injection code
* Simplification of AArch32 system register handling
* Fix PMU accesses when no PMU is enabled
* Expose CSV3 on non-Meltdown hosts
* Cache hierarchy discovery fixes
* PV steal-time cleanups
* Allow function pointers at EL2
* Various host EL2 entry cleanups
* Simplification of the EL2 vector allocation
s390:
* memcg accouting for s390 specific parts of kvm and gmap
* selftest for diag318
* new kvm_stat for when async_pf falls back to sync
x86:
* Tracepoints for the new pagetable code from 5.10
* Catch VFIO and KVM irqfd events before userspace
* Reporting dirty pages to userspace with a ring buffer
* SEV-ES host support
* Nested VMX support for wait-for-SIPI activity state
* New feature flag (AVX512 FP16)
* New system ioctl to report Hyper-V-compatible paravirtualization features
Generic:
* Selftest improvements
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl/bdL4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNgQQgAnTH6rhXa++Zd5F0EM2NwXwz3iEGb
lOq1DZSGjs6Eekjn8AnrWbmVQr+CBCuGU9MrxpSSzNDK/awryo3NwepOWAZw9eqk
BBCVwGBbJQx5YrdgkGC0pDq2sNzcpW/VVB3vFsmOxd9eHblnuKSIxEsCCXTtyqIt
XrLpQ1UhvI4yu102fDNhuFw2EfpzXm+K0Lc0x6idSkdM/p7SyeOxiv8hD4aMr6+G
bGUQuMl4edKZFOWFigzr8NovQAvDHZGrwfihu2cLRYKLhV97QuWVmafv/yYfXcz2
drr+wQCDNzDOXyANnssmviazrhOX0QmTAhbIXGGX/kTxYKcfPi83ZLoI3A==
=ISud
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"Much x86 work was pushed out to 5.12, but ARM more than made up for it.
ARM:
- PSCI relay at EL2 when "protected KVM" is enabled
- New exception injection code
- Simplification of AArch32 system register handling
- Fix PMU accesses when no PMU is enabled
- Expose CSV3 on non-Meltdown hosts
- Cache hierarchy discovery fixes
- PV steal-time cleanups
- Allow function pointers at EL2
- Various host EL2 entry cleanups
- Simplification of the EL2 vector allocation
s390:
- memcg accouting for s390 specific parts of kvm and gmap
- selftest for diag318
- new kvm_stat for when async_pf falls back to sync
x86:
- Tracepoints for the new pagetable code from 5.10
- Catch VFIO and KVM irqfd events before userspace
- Reporting dirty pages to userspace with a ring buffer
- SEV-ES host support
- Nested VMX support for wait-for-SIPI activity state
- New feature flag (AVX512 FP16)
- New system ioctl to report Hyper-V-compatible paravirtualization features
Generic:
- Selftest improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (171 commits)
KVM: SVM: fix 32-bit compilation
KVM: SVM: Add AP_JUMP_TABLE support in prep for AP booting
KVM: SVM: Provide support to launch and run an SEV-ES guest
KVM: SVM: Provide an updated VMRUN invocation for SEV-ES guests
KVM: SVM: Provide support for SEV-ES vCPU loading
KVM: SVM: Provide support for SEV-ES vCPU creation/loading
KVM: SVM: Update ASID allocation to support SEV-ES guests
KVM: SVM: Set the encryption mask for the SVM host save area
KVM: SVM: Add NMI support for an SEV-ES guest
KVM: SVM: Guest FPU state save/restore not needed for SEV-ES guest
KVM: SVM: Do not report support for SMM for an SEV-ES guest
KVM: x86: Update __get_sregs() / __set_sregs() to support SEV-ES
KVM: SVM: Add support for CR8 write traps for an SEV-ES guest
KVM: SVM: Add support for CR4 write traps for an SEV-ES guest
KVM: SVM: Add support for CR0 write traps for an SEV-ES guest
KVM: SVM: Add support for EFER write traps for an SEV-ES guest
KVM: SVM: Support string IO operations for an SEV-ES guest
KVM: SVM: Support MMIO for an SEV-ES guest
KVM: SVM: Create trace events for VMGEXIT MSR protocol processing
KVM: SVM: Create trace events for VMGEXIT processing
...
It appears that despite its name, the bcm2836_arm_irqchip_ipi_eoi()
callback is an acknowledgement, and not an EOI. This means that
we lose IPIs that are made pending between the handling of the
IPI and the write to LOCAL_MAILBOX0_CLR0. With the right timing,
things fail nicely.
This used to work with handle_percpu_devid_fasteoi_ipi(), which
started by eoi-ing the interrupt. With the standard fasteoi flow,
this doesn't work anymore.
So let's use this callback for what it is, an ack. Your favourite
RPi-2/3 is back up and running.
Fixes: ffdad793d5 ("irqchip/bcm2836: Make IPIs use handle_percpu_devid_irq()")
Cc: Valentin Schneider <valentin.schneider@arm.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/c9fb4ab3-a5cb-648c-6de3-c6a871e60870@roeck-us.net
We have a problem if we use gpio-keys and configure wakeups such that
we only want one edge to wake us up. AKA:
wakeup-event-action = <EV_ACT_DEASSERTED>;
wakeup-source;
Specifically we end up with a phantom interrupt that blocks suspend if
the line was already high and we want wakeups on rising edges (AKA we
want the GPIO to go low and then high again before we wake up). The
opposite is also problematic.
Specifically, here's what's happening today:
1. Normally, gpio-keys configures to look for both edges. Due to the
current workaround introduced in commit c3c0c2e18d ("pinctrl:
qcom: Handle broken/missing PDC dual edge IRQs on sc7180"), if the
line was high we'd configure for falling edges.
2. At suspend time, we change to look for rising edges.
3. After qcom_pdc_gic_set_type() runs, we get a phantom interrupt.
We can solve this by just clearing the phantom interrupt.
NOTE: it is possible that this could cause problems for a client with
very specific needs, but there's not much we can do with this
hardware. As an example, let's say the interrupt signal is currently
high and the client is looking for falling edges. The client now
changes to look for rising edges. The client could possibly expect
that if the line has a short pulse low (and back high) that it would
always be detected. Specifically no matter when the pulse happened,
it should either have tripped the (old) falling edge trigger or the
(new) rising edge trigger. We will simply not trip it. We could
narrow down the race a bit by polling our parent before changing
types, but no matter what we do there will still be a period of time
where we can't tell the difference between a real transition (or more
than one transition) and the phantom.
Fixes: f55c73aef8 ("irqchip/pdc: Add PDC interrupt controller for QCOM SoCs")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20201211141514.v4.1.I2702919afc253e2a451bebc3b701b462b2d22344@changeid
An aliasing PCI bridge is another case where we should flag the
corresponding allocation as "proxied", as MSIs are coming with
the bridge's RID, and not the originating device's.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/20201129135208.680293-4-maz@kernel.org
The ITS already has some notion of "shared" devices. Let's map the
MSI_ALLOC_FLAGS_PROXY_DEVICE flag onto this internal property.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/20201129135208.680293-3-maz@kernel.org
ti_sci_intr_irq_domain_free() assumes that out_irq of intr is stored in
data->chip_data and uses it for calling ti_sci irq_free() and then
mark the out_irq as available resource. But ti_sci_intr_irq_domain_alloc()
is storing p_hwirq(parent's hardware irq) which is translated from out_irq.
This is causing resource leakage and eventually out_irq resources might
be exhausted. Fix ti_sci_intr_irq_domain_alloc() by storing the out_irq
in data->chip_data.
Fixes: a5b659bd4b ("irqchip/ti-sci-intr: Add support for INTR being a parent to INTR")
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201102120631.11165-1-lokeshvutla@ti.com
On a successful probe, the driver tries to print a success message with
INTA device id. It uses pdev->id for printing the id but id is stored in
inta->ti_sci_id. Fix it by correcting the dev_info parameter.
Fixes: 5c4b585d29 ("irqchip/ti-sci-inta: Add support for INTA directly connecting to GIC")
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201102120614.11109-1-lokeshvutla@ti.com
NPS platform has been removed from ARC port and there are no in-tree
users of it now. So RIP !
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <maz@kernel.org>
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20201105212210.1891598-3-vgupta@synopsys.com
As done for the Arm GIC irqchips, move IPIs to handle_percpu_devid_irq() as
handle_percpu_devid_fasteoi_ipi() isn't actually required.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201109094121.29975-5-valentin.schneider@arm.com
As done for the Arm GIC irqchips, move IPIs to handle_percpu_devid_irq() as
handle_percpu_devid_fasteoi_ipi() isn't actually required.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201109094121.29975-4-valentin.schneider@arm.com
As done for the Arm GIC irqchips, move IPIs to handle_percpu_devid_irq() as
handle_percpu_devid_fasteoi_ipi() isn't actually required.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201109094121.29975-3-valentin.schneider@arm.com
handle_percpu_devid_fasteoi_ipi() states:
* The biggest difference with the IRQ version is that the interrupt is
* EOIed early, as the IPI could result in a context switch, and we need to
* make sure the IPI can fire again
All that can actually happen scheduler-wise within the handling of an IPI
is the raising of TIF_NEED_RESCHED (and / or folding thereof into
preempt_count); see scheduler_ipi() or sched_ttwu_pending() for instance.
Said flag / preempt_count is evaluated some time later before returning to
whatever context was interrupted, and this gates a call to
preempt_schedule_irq() (arm64_preempt_schedule_irq() in arm64).
Per the above, SGI's do not need a different handler than PPI's, so make
them use the same (handle_percpu_devid_irq).
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201109094121.29975-2-valentin.schneider@arm.com
This patch extends irqchip driver for ocelot to be used with an other
vcoreiii base platform: Jaguar2.
Based on a larger patch from Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201125103206.136498-7-gregory.clement@bootlin.com
This patch extends irqchip driver for ocelot to be used with an other
vcoreiii base platform: Serval.
Based on a larger patch from Lars Povlsen <lars.povlsen@microchip.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201125103206.136498-6-gregory.clement@bootlin.com
This patch extends irqchip driver for oceleot to be used with an other
vcoreiii base platform: Luton.
For this platform there is a few differences:
- the interrupt must be enabled for the parent controller
- there is no trigger register needed to be managed
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201125103206.136498-5-gregory.clement@bootlin.com
This patch extends irqchip driver for oceleot to be used with other
vcoreiii base platforms.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201125103206.136498-4-gregory.clement@bootlin.com
The 10us delay of the poll on the GICR_VPENDBASER.Dirty bit is too
high, which might greatly affect the total scheduling latency of a
vCPU in our measurement. So we reduce it to 1 to lessen the impact.
Signed-off-by: Shenming Lu <lushenming@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201128141857.983-2-lushenming@huawei.com
The alpine-msi driver has an interesting allocation error handling,
where it frees the same interrupts repeatedly. Hilarity follows.
This code is probably never executed, but let's fix it nonetheless.
Fixes: e6b78f2c3e ("irqchip: Add the Alpine MSIX interrupt controller")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Cc: Tsahee Zidenberg <tsahee@annapurnalabs.com>
Cc: Antoine Tenart <atenart@kernel.org>
Link: https://lore.kernel.org/r/20201129135525.396671-1-maz@kernel.org
Add an new IRQ chip declaration for LS1043A and LS1088A, and cleanup
the use of the "bit_reverse" property, now gated on the Soc type.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201130101515.27431-1-biwen.li@oss.nxp.com
Fix build warnings as below:
drivers/irqchip/irq-loongson-htpic.c: In function 'htpic_reg_init':
>> drivers/irqchip/irq-loongson-htpic.c:62:12: warning: variable 'val' set but not used [-Wunused-but-set-variable]
62 | uint32_t val;
| ^~~
drivers/irqchip/irq-loongson-htpic.c: At top level:
>> drivers/irqchip/irq-loongson-htpic.c:84:12: warning: no previous prototype for 'htpic_of_init' [-Wmissing-prototypes]
84 | int __init htpic_of_init(struct device_node *node, struct device_node *parent)
| ^~~~~~~~~~~~~
Fixes: a93f1d903f ("irqchip: Add driver for Loongson-3 HyperTransport PIC controller")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1607159744-995-1-git-send-email-chenhuacai@kernel.org
In order to reduce the impact of the VPT parsing happening on the GIC,
we can split the vcpu reseidency in two phases:
- programming GICR_VPENDBASER: this still happens in vcpu_load()
- checking for the VPT parsing to be complete: this can happen
on vcpu entry (in kvm_vgic_flush_hwstate())
This allows the GIC and the CPU to work in parallel, rewmoving some
of the entry overhead.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Shenming Lu <lushenming@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201128141857.983-3-lushenming@huawei.com
- Fix Exiu driver trigger type when using ACPI
- Fix GICv3 ITS suspend/resume to use the in-kernel path
at all times, sidestepping braindead firmware support
-----BEGIN PGP SIGNATURE-----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=IjDX
-----END PGP SIGNATURE-----
Merge tag 'irqchip-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zyngier:
- Fix Exiu driver trigger type when using ACPI
- Fix GICv3 ITS suspend/resume to use the in-kernel path
at all times, sidestepping braindead firmware support
Link: https://lore.kernel.org/r/20201122184752.553990-1-maz@kernel.org
On systems without HW-based collections (i.e. anything except GIC-500),
we rely on firmware to perform the ITS save/restore. This doesn't
really work, as although FW can properly save everything, it cannot
fully restore the state of the command queue (the read-side is reset
to the head of the queue). This results in the ITS consuming previously
processed commands, potentially corrupting the state.
Instead, let's always save the ITS state on suspend, disabling it in the
process, and restore the full state on resume. This saves us from broken
FW as long as it doesn't enable the ITS by itself (for which we can't do
anything).
This amounts to simply dropping the ITS_FLAGS_SAVE_SUSPEND_STATE.
Signed-off-by: Xu Qiang <xuqiang36@huawei.com>
[maz: added warning on resume, rewrote commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201107104226.14282-1-xuqiang36@huawei.com
Since fwspec->param_count of ACPI node is two, the index of IRQ type
in fwspec->param[] should be 1 rather than 2.
Fixes: 3d090a36c8 ("irqchip/exiu: Implement ACPI support")
Signed-off-by: Chen Baozi <chenbaozi@phytium.com.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20201117032015.11805-1-cbz@baozis.org
Cc: stable@vger.kernel.org
- Fix the fallout of the IPI as interrupt conversion in Kconfig and the
BCM2836 interrupt chip driver/
- Fixes for interrupt affinity setting and the handling of hierarchical
irq domains in the SiFive PLIC driver.
- Make the unmapped event handling in the TI SCI driver work correctly.
- A few minor fixes and cleanups in various chip drivers and Kconfig.
-----BEGIN PGP SIGNATURE-----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=HUPi
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of fixes for interrupt chip drivers:
- Fix the fallout of the IPI as interrupt conversion in Kconfig and
the BCM2836 interrupt chip driver
- Fixes for interrupt affinity setting and the handling of
hierarchical irq domains in the SiFive PLIC driver
- Make the unmapped event handling in the TI SCI driver work
correctly
- A few minor fixes and cleanups in various chip drivers and Kconfig"
* tag 'irq-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
dt-bindings: irqchip: ti, sci-inta: Fix diagram indentation for unmapped events
irqchip/ti-sci-inta: Add support for unmapped event handling
dt-bindings: irqchip: ti, sci-inta: Update for unmapped event handling
irqchip/renesas-intc-irqpin: Merge irlm_bit and needs_irlm
irqchip/sifive-plic: Fix chip_data access within a hierarchy
irqchip/sifive-plic: Fix broken irq_set_affinity() callback
irqchip/stm32-exti: Add all LP timer exti direct events support
irqchip/bcm2836: Fix missing __init annotation
irqchip/mips: Drop selection of IRQ_DOMAIN_HIERARCHY
irqchip/mst: Make mst_intc_of_init static
irqchip/mst: MST_IRQ should depend on ARCH_MEDIATEK or ARCH_MSTARV7
genirq: Let GENERIC_IRQ_IPI select IRQ_DOMAIN_HIERARCHY
The DMA (BCDMA/PKTDMA and their rings/flows) events are under the INTA's
supervision as unmapped events in AM64.
In order to keep the current SW stack working, the INTA driver must replace
the dev_id with it's own when a request comes for BCDMA or PKTDMA
resources.
Implement parsing of the optional "ti,unmapped-event-sources" phandle array
to get the sci-dev-ids of the devices where the unmapped events originate.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201020073243.19255-3-peter.ujfalusi@ti.com
Get rid of the separate flag to indicate if the IRLM bit is present in
the INTC/Interrupt Control Register 0, by considering -1 an invalid
irlm_bit value.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201028153955.1736767-1-geert+renesas@glider.be
The plic driver crashes in plic_irq_unmask() when the interrupt is within a
hierarchy, as it picks the top-level chip_data instead of its local one.
Using irq_data_get_irq_chip_data() instead of irq_get_chip_data() solves
the issue for good.
Fixes: f1ad1133b1 ("irqchip/sifive-plic: Add support for multiple PLICs")
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
[maz: rewrote commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Link: https://lore.kernel.org/r/20201029023738.127472-1-greentime.hu@sifive.com
Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.
Remove the quote operator # from compiler_attributes.h __section macro.
Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.
Conversion done using the script at:
https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
An interrupt submitted to an affinity change will always be left enabled
after plic_set_affinity() has been called, while the expectation is that
it should stay in whatever state it was before the call.
Preserving the configuration fixes a PWM hang issue on the Unleashed
board.
[ 919.015783] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[ 919.020922] rcu: 0-...0: (0 ticks this GP)
idle=7d2/1/0x4000000000000002 softirq=1424/1424 fqs=105807
[ 919.030295] (detected by 1, t=225825 jiffies, g=1561, q=3496)
[ 919.036109] Task dump for CPU 0:
[ 919.039321] kworker/0:1 R running task 0 30 2 0x00000008
[ 919.046359] Workqueue: events set_brightness_delayed
[ 919.051302] Call Trace:
[ 919.053738] [<ffffffe000930d92>] __schedule+0x194/0x4de
[ 982.035783] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[ 982.040923] rcu: 0-...0: (0 ticks this GP)
idle=7d2/1/0x4000000000000002 softirq=1424/1424 fqs=113325
[ 982.050294] (detected by 1, t=241580 jiffies, g=1561, q=3509)
[ 982.056108] Task dump for CPU 0:
[ 982.059321] kworker/0:1 R running task 0 30 2 0x00000008
[ 982.066359] Workqueue: events set_brightness_delayed
[ 982.071302] Call Trace:
[ 982.073739] [<ffffffe000930d92>] __schedule+0x194/0x4de
[..]
Fixes: bb0fed1c60 ("irqchip/sifive-plic: Switch to fasteoi flow")
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
[maz: tidy-up commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20201020081532.2377-1-greentime.hu@sifive.com
Paul Cercueil
Chen Baozi