Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn>
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for sis630
Signed-off-by: Wolfram Sang <wsa@kernel.org>
clear_cpu_cap(&boot_cpu_data) is very similar to setup_clear_cpu_cap()
except that the latter also sets a bit in 'cpu_caps_cleared' which
later clears the same cap in secondary cpus, which is likely what is
meant here.
Fixes: 47125db27e ("perf/x86/intel/lbr: Support Architectural LBR")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lkml.kernel.org/r/20220718141123.136106-2-mlevitsk@redhat.com
Different function signatures means they needs to be different
functions; otherwise CFI gets upset.
As triggered by the ftrace boot tests:
[] CFI failure at ftrace_return_to_handler+0xac/0x16c (target: ftrace_stub+0x0/0x14; expected type: 0x0a5d5347)
Fixes: 3c516f89e1 ("x86: Add support for CONFIG_CFI_CLANG")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lkml.kernel.org/r/Y06dg4e1xF6JTdQq@hirez.programming.kicks-ass.net
Remove the weird jumps to RET and simply use RET.
This then promotes ftrace_stub() to a real function; which becomes
important for kcfi.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220915111148.719080593@infradead.org
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Commit 8795e182b0 ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")
uncovered a bug in amdgpu that required a reordering of the driver
init sequence to avoid accessing a special register on the GPU
before it was properly set up leading to an PCI AER error. This
reordering uncovered a different hw programming ordering dependency
in some APUs where the SDMA doorbells need to be programmed before
the GFX doorbells. To fix this, move the SDMA doorbell programming
back into the soc15 common code, but use the actual doorbell range
values directly rather than the values stored in the ring structure
since those will not be initialized at this point.
This is a partial revert, but with the doorbell assignment
fixed so the proper doorbell index is set before it's used.
Fixes: e3163bc8ff ("drm/amdgpu: move nbio sdma_doorbell_range() into sdma code for vega")
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: skhan@linuxfoundation.org
Cc: stable@vger.kernel.org
As previous commit, 'blk_trace_cleanup' will stop block trace if
block trace's state is 'Blktrace_running'.
So remove unnessary stop block trace in 'blk_trace_shutdown'.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221019033602.752383-4-yebin@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When test as follows:
step1: ioctl(sda, BLKTRACESETUP, &arg)
step2: ioctl(sda, BLKTRACESTART, NULL)
step3: ioctl(sda, BLKTRACETEARDOWN, NULL)
step4: ioctl(sda, BLKTRACESETUP, &arg)
Got issue as follows:
debugfs: File 'dropped' in directory 'sda' already present!
debugfs: File 'msg' in directory 'sda' already present!
debugfs: File 'trace0' in directory 'sda' already present!
And also find syzkaller report issue like "KASAN: use-after-free Read in relay_switch_subbuf"
"https://syzkaller.appspot.com/bug?id=13849f0d9b1b818b087341691be6cc3ac6a6bfb7"
If remove block trace without stop(BLKTRACESTOP) block trace, '__blk_trace_remove'
will just set 'q->blk_trace' with NULL. However, debugfs file isn't removed, so
will report file already present when call BLKTRACESETUP.
static int __blk_trace_remove(struct request_queue *q)
{
struct blk_trace *bt;
bt = rcu_replace_pointer(q->blk_trace, NULL,
lockdep_is_held(&q->debugfs_mutex));
if (!bt)
return -EINVAL;
if (bt->trace_state != Blktrace_running)
blk_trace_cleanup(q, bt);
return 0;
}
If do test as follows:
step1: ioctl(sda, BLKTRACESETUP, &arg)
step2: ioctl(sda, BLKTRACESTART, NULL)
step3: ioctl(sda, BLKTRACETEARDOWN, NULL)
step4: remove sda
There will remove debugfs directory which will remove recursively all file
under directory.
>> blk_release_queue
>> debugfs_remove_recursive(q->debugfs_dir)
So all files which created in 'do_blk_trace_setup' are removed, and
'dentry->d_inode' is NULL. But 'q->blk_trace' is still in 'running_trace_lock',
'trace_note_tsk' will traverse 'running_trace_lock' all nodes.
>>trace_note_tsk
>> trace_note
>> relay_reserve
>> relay_switch_subbuf
>> d_inode(buf->dentry)->i_size
To solve above issues, reference commit '5afedf670caf', call 'blk_trace_cleanup'
unconditionally in '__blk_trace_remove' and first stop block trace in
'blk_trace_cleanup'.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221019033602.752383-3-yebin@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_put() with REQ_ALLOC_CACHE assumes that it's executed not from
an irq context. Let's add a warning if the invariant is not respected,
especially since there is a couple of places removing REQ_POLLED by hand
without also clearing REQ_ALLOC_CACHE.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/558d78313476c4e9c233902efa0092644c3d420a.1666122465.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If the CPU mask allocation for a node fails, then the memory allocated for
the 'io_wqe' struct of the current node doesn't get freed on the error
handling path, since it has not yet been added to the 'wqes' array.
This was spotted when fuzzing v6.1-rc1 with Syzkaller:
BUG: memory leak
unreferenced object 0xffff8880093d5000 (size 1024):
comm "syz-executor.2", pid 7701, jiffies 4295048595 (age 13.900s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000cb463369>] __kmem_cache_alloc_node+0x18e/0x720
[<00000000147a3f9c>] kmalloc_node_trace+0x2a/0x130
[<000000004e107011>] io_wq_create+0x7b9/0xdc0
[<00000000c38b2018>] io_uring_alloc_task_context+0x31e/0x59d
[<00000000867399da>] __io_uring_add_tctx_node.cold+0x19/0x1ba
[<000000007e0e7a79>] io_uring_setup.cold+0x1b80/0x1dce
[<00000000b545e9f6>] __x64_sys_io_uring_setup+0x5d/0x80
[<000000008a8a7508>] do_syscall_64+0x5d/0x90
[<000000004ac08bec>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: 0e03496d19 ("io-wq: use private CPU mask")
Cc: stable@vger.kernel.org
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Link: https://lore.kernel.org/r/20221020014710.902201-1-rafaelmendsr@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit c347a787e3 (drbd: set ->bi_bdev in drbd_req_new) moved a
bio_set_dev call (which has since been removed) to "earlier", from
drbd_request_prepare to drbd_req_new.
The problem is that this accesses device->ldev->backing_bdev, which is
not NULL-checked at this point. When we don't have an ldev (i.e. when
the DRBD device is diskless), this leads to a null pointer deref.
So, only allocate the private_bio if we actually have a disk. This is
also a small optimization, since we don't clone the bio to only to
immediately free it again in the diskless case.
Fixes: c347a787e3 ("drbd: set ->bi_bdev in drbd_req_new")
Co-developed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Co-developed-by: Joel Colledge <joel.colledge@linbit.com>
Signed-off-by: Joel Colledge <joel.colledge@linbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221020085205.129090-1-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__le32 and __le64 types aren't portable and are not available on
FreeBSD (which uses the same uAPI).
Instead of attempting to always output little endian, just use native
endianness in the dumps. Tools can detect the endianness in use by
looking at the 'magic' field, but equally we don't expect big-endian to
be used with Mali (there are no known implementations out there).
Bug: https://gitlab.freedesktop.org/mesa/mesa/-/issues/7252
Fixes: 730c2bf4ad ("drm/panfrost: Add support for devcoredump")
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221017104602.142992-3-steven.price@arm.com
The two structs internal to struct panfrost_dump_object_header were
named, but sadly that is incompatible with C++, causing an error: "an
anonymous union may only have public non-static data members".
However nothing refers to struct pan_reg_hdr and struct pan_bomap_hdr
and there's no need to export these definitions, so lets drop them. This
fixes the C++ build error with the minimum change in userspace API.
Reported-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Fixes: 730c2bf4ad ("drm/panfrost: Add support for devcoredump")
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221017104602.142992-2-steven.price@arm.com
Commit 35a3b82f1b ("drm/connector: Introduce drmm_connector_init")
introduced the function drmm_connector_init() with a parameter for an
optional ddc pointer to the i2c controller used to access the DDC bus.
However, the underlying call to __drm_connector_init() was always
setting it to NULL instead of passing the ddc argument around.
This resulted in unexpected null pointer dereference on platforms
expecting to get a DDC controller.
Fixes: 35a3b82f1b ("drm/connector: Introduce drmm_connector_init")
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20221019143442.1798964-1-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The xrgb2101010 format conversion test (unlike for other formats) does
an endianness conversion on the results. However, it always converts
TEST_BUF_SIZE 32-bit integers, which results in reading from (and
writing to) more memory than in present in the result buffer. Instead,
use the buffer size, divided by sizeof(u32).
The issue could be reproduced with KASAN:
./tools/testing/kunit/kunit.py run --kunitconfig drivers/gpu/drm/tests \
--kconfig_add CONFIG_KASAN=y --kconfig_add CONFIG_KASAN_VMALLOC=y \
--kconfig_add CONFIG_KASAN_KUNIT_TEST=y \
drm_format_helper_test.*xrgb2101010
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Fixes: 4531143196 ("drm/format-helper: Add KUnit tests for drm_fb_xrgb8888_to_xrgb2101010()")
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019073239.3779180-1-davidgow@google.com
If the cable is disconnected the PHY seems to toggle between MDI and
MDI-X modes. With the MDI crossover status interrupt active this causes
roughly 10 interrupts per second.
As the crossover status isn't checked by the driver, the interrupt can
be disabled to reduce the interrupt load.
Fixes: 87461f7a58 ("net: phy: DP83822 initial driver submission")
Signed-off-by: Felix Riemann <felix.riemann@sma.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221018104755.30025-1-svc.sw.rte.linux@sma.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eliminate the following coccicheck warning:
./drivers/block/ublk_drv.c:127:16-19: WARNING use flexible-array member instead
Signed-off-by: Yushan Zhou <katrinzhou@tencent.com>
Link: https://lore.kernel.org/r/20221018100132.355393-1-zys.zljxml@gmail.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Inject fault while probing module, if device_register() fails,
but the refcount of kobject is not decreased to 0, the name
allocated in dev_set_name() is leaked. Fix this by calling
put_device(), so that name can be freed in callback function
kobject_cleanup().
unreferenced object 0xffff88810152ad20 (size 8):
comm "modprobe", pid 252, jiffies 4294849206 (age 22.713s)
hex dump (first 8 bytes):
68 77 73 69 6d 30 00 ff hwsim0..
backtrace:
[<000000009c3504ed>] __kmalloc_node_track_caller+0x44/0x1b0
[<00000000c0228a5e>] kvasprintf+0xb5/0x140
[<00000000cff8c21f>] kvasprintf_const+0x55/0x180
[<0000000055a1e073>] kobject_set_name_vargs+0x56/0x150
[<000000000a80b139>] dev_set_name+0xab/0xe0
Fixes: f36a111a74 ("wwan_hwsim: WWAN device simulator")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://lore.kernel.org/r/20221018131607.1901641-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Filters on different vports are qualified by different implicit MACs and/or
VLANs, so shouldn't be considered equal even if their other match fields
are identical.
Fixes: 7c460d9be6 ("sfc: Extend and abstract efx_filter_spec to cover Huntington/EF10")
Co-developed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20221018092841.32206-1-pieter.jansen-van-vuuren@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When we delete or rename a directory we must also drop any cached lease we have
on the directory.
Fixes: a350d6e73f5e ("cifs: enable caching of directories for which a lease is held")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Missing flowi uid field in nft_fib expression, from Guillaume Nault.
This is broken since the creation of the fib expression.
2) Relax sanity check to fix bogus EINVAL error when deleting elements
belonging set intervals. Broken since 6.0-rc.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: relax NFTA_SET_ELEM_KEY_END set flags requirements
netfilter: rpfilter/fib: Set ->flowic_uid correctly for user namespaces.
====================
Link: https://lore.kernel.org/r/20221019065225.1006344-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update Kishon's email address in PCI endpoint subsystem maintainer
entry and mark him as reviewer.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Address a bunch of kdoc warnings:
include/net/genetlink.h:81: warning: Function parameter or member 'module' not described in 'genl_family'
include/net/genetlink.h:243: warning: expecting prototype for struct genl_info. Prototype was for struct genl_dumpit_info instead
include/net/genetlink.h:419: warning: Function parameter or member 'net' not described in 'genlmsg_unicast'
include/net/genetlink.h:438: warning: expecting prototype for gennlmsg_data(). Prototype was for genlmsg_data() instead
include/net/genetlink.h:244: warning: Function parameter or member 'op' not described in 'genl_dumpit_info'
Link: https://lore.kernel.org/r/20221018231310.1040482-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When we compile-in the CCI along with the imx412 driver and run on the RB5
we see that i2c_add_adapter() causes the probe of the imx412 driver to
happen.
This probe tries to perform an i2c xfer() and the xfer() in i2c-qcom-cci.c
fails on pm_runtime_get() because the i2c-qcom-cci.c::probe() function has
not completed to pm_runtime_enable(dev).
Fix this sequence by ensuring pm_runtime_xxx() calls happen prior to adding
the i2c adapter.
Fixes: e517526195 ("i2c: Add Qualcomm CCI I2C driver")
Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The missing "platform" alias is required for the mgb4 v4l2 driver to load
the i2c controller driver when probing the HW.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Assigning the device's dma_range_map from the iterator variable after
the loop means it always points to the empty terminator at the end of
the map, which is not what we want. Similarly, freeing the iterator on
error when it points to somwhere in the middle of the allocated array
won't work either. Fix this.
Fixes: bf2ee8d0c3 ("ACPI: scan: Support multiple DMA windows with different offsets")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Jianmin Lv <lvjianmin@loongson.cn>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The "Server interfaces" count in /proc/fs/cifs/DebugData increases
as the interfaces are requeried, rather than being reset to the new
value. This could cause a problem if the server disabled
multichannel as the iface_count is checked in try_adding_channels
to see if multichannel still supported.
Also fixes a coverity warning:
Addresses-Coverity: 1526374 ("Concurrent data access violations (MISSING_LOCK)")
Cc: <stable@vger.kernel.org>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The following warning was triggered on a hardware environment:
SELinux: Converting 162 SID table entries...
BUG: sleeping function called from invalid context at
__might_sleep+0x60/0x74 0x0
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 5943, name: tar
CPU: 7 PID: 5943 Comm: tar Tainted: P O 5.10.0 #1
Call trace:
dump_backtrace+0x0/0x1c8
show_stack+0x18/0x28
dump_stack+0xe8/0x15c
___might_sleep+0x168/0x17c
__might_sleep+0x60/0x74
__kmalloc_track_caller+0xa0/0x7dc
kstrdup+0x54/0xac
convert_context+0x48/0x2e4
sidtab_context_to_sid+0x1c4/0x36c
security_context_to_sid_core+0x168/0x238
security_context_to_sid_default+0x14/0x24
inode_doinit_use_xattr+0x164/0x1e4
inode_doinit_with_dentry+0x1c0/0x488
selinux_d_instantiate+0x20/0x34
security_d_instantiate+0x70/0xbc
d_splice_alias+0x4c/0x3c0
ext4_lookup+0x1d8/0x200 [ext4]
__lookup_slow+0x12c/0x1e4
walk_component+0x100/0x200
path_lookupat+0x88/0x118
filename_lookup+0x98/0x130
user_path_at_empty+0x48/0x60
vfs_statx+0x84/0x140
vfs_fstatat+0x20/0x30
__se_sys_newfstatat+0x30/0x74
__arm64_sys_newfstatat+0x1c/0x2c
el0_svc_common.constprop.0+0x100/0x184
do_el0_svc+0x1c/0x2c
el0_svc+0x20/0x34
el0_sync_handler+0x80/0x17c
el0_sync+0x13c/0x140
SELinux: Context system_u:object_r:pssp_rsyslog_log_t:s0:c0 is
not valid (left unmapped).
It was found that within a critical section of spin_lock_irqsave in
sidtab_context_to_sid(), convert_context() (hooked by
sidtab_convert_params.func) might cause the process to sleep via
allocating memory with GFP_KERNEL, which is problematic.
As Ondrej pointed out [1], convert_context()/sidtab_convert_params.func
has another caller sidtab_convert_tree(), which is okay with GFP_KERNEL.
Therefore, fix this problem by adding a gfp_t argument for
convert_context()/sidtab_convert_params.func and pass GFP_KERNEL/_ATOMIC
properly in individual callers.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20221018120111.1474581-1-gongruiqi1@huawei.com/ [1]
Reported-by: Tan Ninghao <tanninghao1@huawei.com>
Fixes: ee1a84fdfe ("selinux: overhaul sidtab to fix bug and improve performance")
Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com>
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
[PM: wrap long BUG() output lines, tweak subject line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Paul Blakey says:
====================
net: Fix return value of qdisc ingress handling on success
Fix patch + self-test with the currently broken scenario.
v4->v3:
Removed new line in self test and rebase (Paolo).
v2->v3:
Added DROP return to TC_ACT_SHOT case (Cong).
v1->v2:
Changed blamed commit
Added self-test
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This test runs a simple ingress tc setup between two veth pairs,
then adds a egress->ingress rule to test the chaining of tc ingress
pipeline to tc egress piepline.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently qdisc ingress handling (sch_handle_ingress()) doesn't
set a return value and it is left to the old return value of
the caller (__netif_receive_skb_core()) which is RX drop, so if
the packet is consumed, caller will stop and return this value
as if the packet was dropped.
This causes a problem in the kernel tcp stack when having a
egress tc rule forwarding to a ingress tc rule.
The tcp stack sending packets on the device having the egress rule
will see the packets as not successfully transmitted (although they
actually were), will not advance it's internal state of sent data,
and packets returning on such tcp stream will be dropped by the tcp
stack with reason ack-of-unsent-data. See reproduction in [0] below.
Fix that by setting the return value to RX success if
the packet was handled successfully.
[0] Reproduction steps:
$ ip link add veth1 type veth peer name peer1
$ ip link add veth2 type veth peer name peer2
$ ifconfig peer1 5.5.5.6/24 up
$ ip netns add ns0
$ ip link set dev peer2 netns ns0
$ ip netns exec ns0 ifconfig peer2 5.5.5.5/24 up
$ ifconfig veth2 0 up
$ ifconfig veth1 0 up
#ingress forwarding veth1 <-> veth2
$ tc qdisc add dev veth2 ingress
$ tc qdisc add dev veth1 ingress
$ tc filter add dev veth2 ingress prio 1 proto all flower \
action mirred egress redirect dev veth1
$ tc filter add dev veth1 ingress prio 1 proto all flower \
action mirred egress redirect dev veth2
#steal packet from peer1 egress to veth2 ingress, bypassing the veth pipe
$ tc qdisc add dev peer1 clsact
$ tc filter add dev peer1 egress prio 20 proto ip flower \
action mirred ingress redirect dev veth1
#run iperf and see connection not running
$ iperf3 -s&
$ ip netns exec ns0 iperf3 -c 5.5.5.6 -i 1
#delete egress rule, and run again, now should work
$ tc filter del dev peer1 egress
$ ip netns exec ns0 iperf3 -c 5.5.5.6 -i 1
Fixes: f697c3e8b3 ("[NET]: Avoid unnecessary cloning for ingress filtering")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhengchao Shao says:
====================
net: fix null pointer access issue in qdisc
These three patches fix the same type of problem. Set the default qdisc,
and then construct an init failure scenario when the dev qdisc is
configured on mqprio to trigger the reset process. NULL pointer access
may occur during the reset process.
---
v2: for fq_codel, revert the patch
---
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When the default qdisc is sfb, if the qdisc of dev_queue fails to be
inited during mqprio_init(), sfb_reset() is invoked to clear resources.
In this case, the q->qdisc is NULL, and it will cause gpf issue.
The process is as follows:
qdisc_create_dflt()
sfb_init()
tcf_block_get() --->failed, q->qdisc is NULL
...
qdisc_put()
...
sfb_reset()
qdisc_reset(q->qdisc) --->q->qdisc is NULL
ops = qdisc->ops
The following is the Call Trace information:
general protection fault, probably for non-canonical address
0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
RIP: 0010:qdisc_reset+0x2b/0x6f0
Call Trace:
<TASK>
sfb_reset+0x37/0xd0
qdisc_reset+0xed/0x6f0
qdisc_destroy+0x82/0x4c0
qdisc_put+0x9e/0xb0
qdisc_create_dflt+0x2c3/0x4a0
mqprio_init+0xa71/0x1760
qdisc_create+0x3eb/0x1000
tc_modify_qdisc+0x408/0x1720
rtnetlink_rcv_msg+0x38e/0xac0
netlink_rcv_skb+0x12d/0x3a0
netlink_unicast+0x4a2/0x740
netlink_sendmsg+0x826/0xcc0
sock_sendmsg+0xc5/0x100
____sys_sendmsg+0x583/0x690
___sys_sendmsg+0xe8/0x160
__sys_sendmsg+0xbf/0x160
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f2164122d04
</TASK>
Fixes: e13e02a3c6 ("net_sched: SFB flow scheduler")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 494f5063b8.
When the default qdisc is fq_codel, if the qdisc of dev_queue fails to be
inited during mqprio_init(), fq_codel_reset() is invoked to clear
resources. In this case, the flow is NULL, and it will cause gpf issue.
The process is as follows:
qdisc_create_dflt()
fq_codel_init()
...
q->flows_cnt = 1024;
...
q->flows = kvcalloc(...) --->failed, q->flows is NULL
...
qdisc_put()
...
fq_codel_reset()
...
flow = q->flows + i --->q->flows is NULL
The following is the Call Trace information:
general protection fault, probably for non-canonical address
0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
RIP: 0010:fq_codel_reset+0x14d/0x350
Call Trace:
<TASK>
qdisc_reset+0xed/0x6f0
qdisc_destroy+0x82/0x4c0
qdisc_put+0x9e/0xb0
qdisc_create_dflt+0x2c3/0x4a0
mqprio_init+0xa71/0x1760
qdisc_create+0x3eb/0x1000
tc_modify_qdisc+0x408/0x1720
rtnetlink_rcv_msg+0x38e/0xac0
netlink_rcv_skb+0x12d/0x3a0
netlink_unicast+0x4a2/0x740
netlink_sendmsg+0x826/0xcc0
sock_sendmsg+0xc5/0x100
____sys_sendmsg+0x583/0x690
___sys_sendmsg+0xe8/0x160
__sys_sendmsg+0xbf/0x160
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7fd272b22d04
</TASK>
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the default qdisc is cake, if the qdisc of dev_queue fails to be
inited during mqprio_init(), cake_reset() is invoked to clear
resources. In this case, the tins is NULL, and it will cause gpf issue.
The process is as follows:
qdisc_create_dflt()
cake_init()
q->tins = kvcalloc(...) --->failed, q->tins is NULL
...
qdisc_put()
...
cake_reset()
...
cake_dequeue_one()
b = &q->tins[...] --->q->tins is NULL
The following is the Call Trace information:
general protection fault, probably for non-canonical address
0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:cake_dequeue_one+0xc9/0x3c0
Call Trace:
<TASK>
cake_reset+0xb1/0x140
qdisc_reset+0xed/0x6f0
qdisc_destroy+0x82/0x4c0
qdisc_put+0x9e/0xb0
qdisc_create_dflt+0x2c3/0x4a0
mqprio_init+0xa71/0x1760
qdisc_create+0x3eb/0x1000
tc_modify_qdisc+0x408/0x1720
rtnetlink_rcv_msg+0x38e/0xac0
netlink_rcv_skb+0x12d/0x3a0
netlink_unicast+0x4a2/0x740
netlink_sendmsg+0x826/0xcc0
sock_sendmsg+0xc5/0x100
____sys_sendmsg+0x583/0x690
___sys_sendmsg+0xe8/0x160
__sys_sendmsg+0xbf/0x160
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f89e5122d04
</TASK>
Fixes: 046f6fd5da ("sched: Add Common Applications Kept Enhanced (cake) qdisc")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
fix rxsc and txsc not getting freed before going out of scope
Fixes: c54ffc7360 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Manank Patel <pmanank200502@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 63f534b8ba ("ACPI: PCI: Rework acpi_get_pci_dev()") failed
to reference count the device returned by acpi_get_pci_dev() as
expected by its callers which in some cases may cause device objects
to be dropped prematurely.
Add the missing get_device() to acpi_get_pci_dev().
Fixes: 63f534b8ba ("ACPI: PCI: Rework acpi_get_pci_dev()")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The item passed into nvmet_subsys_attr_qid_max_show is not a member of
struct nvmet_port, it is part of nvmet_subsys. Hence, don't try to
dereference it as struct nvme_ctrl pointer.
Fixes: 3e980f5995 ("nvmet: Expose max queues to configfs")
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20220913064203.133536-1-dwagner@suse.de
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The keep alive timer needs to stay on nvmet_wq, and not
modified to reschedule on the system_wq.
This fixes a warning:
------------[ cut here ]------------
workqueue: WQ_MEM_RECLAIM
nvmet-wq:nvmet_rdma_release_queue_work [nvmet_rdma] is flushing
!WQ_MEM_RECLAIM events:nvmet_keep_alive_timer [nvmet]
WARNING: CPU: 3 PID: 1086 at kernel/workqueue.c:2628
check_flush_dependency+0x16c/0x1e0
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Fixes: 8832cf9221 ("nvmet: use a private workqueue instead of the system workqueue")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Jiangshan Yi