Here is the "real" big set of char/misc driver patches for 5.2-rc1
Loads of different driver subsystem stuff in here, all over the places:
- thunderbolt driver updates
- habanalabs driver updates
- nvmem driver updates
- extcon driver updates
- intel_th driver updates
- mei driver updates
- coresight driver updates
- soundwire driver cleanups and updates
- fastrpc driver updates
- other minor driver updates
- chardev minor fixups
Feels like this tree is getting to be a dumping ground of "small driver
subsystems" these days. Which is fine with me, if it makes things
easier for those subsystem maintainers.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iGwEABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXNHE2w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykvyQCYj5vSHQ88yEU+bzwGzQQLOBWYIwCgm5Iku0Y3
f6V3MvRffg4qUp3cGbU=
=R37j
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.2-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc update part 2 from Greg KH:
"Here is the "real" big set of char/misc driver patches for 5.2-rc1
Loads of different driver subsystem stuff in here, all over the places:
- thunderbolt driver updates
- habanalabs driver updates
- nvmem driver updates
- extcon driver updates
- intel_th driver updates
- mei driver updates
- coresight driver updates
- soundwire driver cleanups and updates
- fastrpc driver updates
- other minor driver updates
- chardev minor fixups
Feels like this tree is getting to be a dumping ground of "small
driver subsystems" these days. Which is fine with me, if it makes
things easier for those subsystem maintainers.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.2-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
intel_th: msu: Add current window tracking
intel_th: msu: Add a sysfs attribute to trigger window switch
intel_th: msu: Correct the block wrap detection
intel_th: Add switch triggering support
intel_th: gth: Factor out trace start/stop
intel_th: msu: Factor out pipeline draining
intel_th: msu: Switch over to scatterlist
intel_th: msu: Replace open-coded list_{first,last,next}_entry variants
intel_th: Only report useful IRQs to subdevices
intel_th: msu: Start handling IRQs
intel_th: pci: Use MSI interrupt signalling
intel_th: Communicate IRQ via resource
intel_th: Add "rtit" source device
intel_th: Skip subdevices if their MMIO is missing
intel_th: Rework resource passing between glue layers and core
intel_th: SPDX-ify the documentation
intel_th: msu: Fix single mode with IOMMU
coresight: funnel: Support static funnel
dt-bindings: arm: coresight: Unify funnel DT binding
coresight: replicator: Add new device id for static replicator
...
This is the first pull request for the char/misc driver tree for 5.2-rc1
This contains only a small number of bugfixes that would have gone to
you for 5.1-rc8 if that had happened, but instead I let them sit in
linux-next for an extra week just "to be sure".
The "big" patch here is for hyper-v, fixing a bug in their sysfs files
that could cause big problems. The others are all small fixes,
resolving reported issues that showed up in 5.1-rcs, plus some odd
'static' cleanups for the phy drivers that really should have waited for
-rc1. Most of these are tagged for the stable trees, so 5.1 will pick
them up.
All of these have been in linux-next for a while, with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXNHCBQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykBdgCdHD/BEKQrdhFsyfNdqlqF9wbrfZoAoLEFGwCZ
1TMdkE1qIcSr+BgOyI8a
=croh
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.2-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc update part 1 from Greg KH:
"This contains only a small number of bugfixes that would have gone to
you for 5.1-rc8 if that had happened, but instead I let them sit in
linux-next for an extra week just "to be sure".
The "big" patch here is for hyper-v, fixing a bug in their sysfs files
that could cause big problems. The others are all small fixes,
resolving reported issues that showed up in 5.1-rcs, plus some odd
'static' cleanups for the phy drivers that really should have waited
for -rc1. Most of these are tagged for the stable trees, so 5.1 will
pick them up.
All of these have been in linux-next for a while, with no reported
issues"
* tag 'char-misc-5.2-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
misc: rtsx: Fixed rts5260 power saving parameter and sd glitch
binder: take read mode of mmap_sem in binder_alloc_free_page()
intel_th: pci: Add Comet Lake support
stm class: Fix channel bitmap on 32-bit systems
stm class: Fix channel free in stm output free path
phy: sun4i-usb: Make sure to disable PHY0 passby for peripheral mode
phy: fix platform_no_drv_owner.cocci warnings
phy: mapphone-mdm6600: add gpiolib dependency
phy: ti: usb2: fix OMAP_CONTROL_PHY dependency
phy: allwinner: allow compile testing
phy: qcom-ufs: Make ufs_qcom_phy_disable_iface_clk static
phy: rockchip-typec: Make usb3_pll_cfg and dp_pll_cfg static
phy: phy-twl4030-usb: Fix cable state handling
Drivers: hv: vmbus: Remove the undesired put_cpu_ptr() in hv_synic_cleanup()
Drivers: hv: vmbus: Fix race condition with new ring_buffer_info mutex
Drivers: hv: vmbus: Set ring_info field to 0 and remove memset
Drivers: hv: vmbus: Refactor chan->state if statement
Drivers: hv: vmbus: Expose monitor data only when monitor pages are used
Remove mmiowb() from the kernel memory barrier API and instead, for
architectures that need it, hide the barrier inside spin_unlock() when
MMIO has been performed inside the critical section.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAlzMFaUACgkQt6xw3ITB
YzRICQgAiv7wF/yIbBhDOmCNCAKDO59chvFQWxXWdGk/aAB56kwKAMXJgLOvlMG/
VRuuLyParTFQETC3jaxKgnO/1hb+PZLDt2Q2KqixtjIzBypKUPWvK2sf6THhSRF1
GK0DBVUd1rCrWrR815+SPb8el4xXtdBzvAVB+Fx35PXVNpdRdqCkK+EQ6UnXGokm
rXXHbnfsnquBDtmb4CR4r2beH+aNElXbdt0Kj8VcE5J7f7jTdW3z6Q9WFRvdKmK7
yrsxXXB2w/EsWXOwFp0SLTV5+fgeGgTvv8uLjDw+SG6t0E0PebxjNAflT7dPrbYL
WecjKC9WqBxrGY+4ew6YJP70ijLBCw==
=aC8m
-----END PGP SIGNATURE-----
Merge tag 'arm64-mmiowb' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull mmiowb removal from Will Deacon:
"Remove Mysterious Macro Intended to Obscure Weird Behaviours (mmiowb())
Remove mmiowb() from the kernel memory barrier API and instead, for
architectures that need it, hide the barrier inside spin_unlock() when
MMIO has been performed inside the critical section.
The only relatively recent changes have been addressing review
comments on the documentation, which is in a much better shape thanks
to the efforts of Ben and Ingo.
I was initially planning to split this into two pull requests so that
you could run the coccinelle script yourself, however it's been plain
sailing in linux-next so I've just included the whole lot here to keep
things simple"
* tag 'arm64-mmiowb' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (23 commits)
docs/memory-barriers.txt: Update I/O section to be clearer about CPU vs thread
docs/memory-barriers.txt: Fix style, spacing and grammar in I/O section
arch: Remove dummy mmiowb() definitions from arch code
net/ethernet/silan/sc92031: Remove stale comment about mmiowb()
i40iw: Redefine i40iw_mmiowb() to do nothing
scsi/qla1280: Remove stale comment about mmiowb()
drivers: Remove explicit invocations of mmiowb()
drivers: Remove useless trailing comments from mmiowb() invocations
Documentation: Kill all references to mmiowb()
riscv/mmiowb: Hook up mmwiob() implementation to asm-generic code
powerpc/mmiowb: Hook up mmwiob() implementation to asm-generic code
ia64/mmiowb: Add unconditional mmiowb() to arch_spin_unlock()
mips/mmiowb: Add unconditional mmiowb() to arch_spin_unlock()
sh/mmiowb: Add unconditional mmiowb() to arch_spin_unlock()
m68k/io: Remove useless definition of mmiowb()
nds32/io: Remove useless definition of mmiowb()
x86/io: Remove useless definition of mmiowb()
arm64/io: Remove useless definition of mmiowb()
ARM/io: Remove useless definition of mmiowb()
mmiowb: Hook up mmiowb helpers to spinlocks and generic I/O accessors
...
Pull x86 cleanups from Ingo Molnar:
"A handful of cleanups: dma-ops cleanups, missing boot time kcalloc()
check, a Sparse fix and use struct_size() to simplify a vzalloc()
call"
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pci: Clean up usage of X86_DEV_DMA_OPS
x86/Kconfig: Remove the unused X86_DMA_REMAP KConfig symbol
x86/kexec/crash: Use struct_size() in vzalloc()
x86/mm/tlb: Define LOADED_MM_SWITCHING with pointer-sized number
x86/platform/uv: Fix missing checks of kcalloc() return values
The CPU accessible DMA memory is general and not used only for PQ.
Accordingly, this patch renames the "free_cpu_pq_dma_mem" label with
"free_cpu_dma_mem".
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The CPU accessible DMA pool is general and not used only for PQ.
Accordingly, this patch rename the "free_cpu_pq_pool" label with
"free_cpu_accessible_dma_pool".
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Where there is a spike in the CPU consumption, it may cause
random failures in the C/I since the KMD timeout for CPU
and/or QMAN0 jobs expires and it stops communicating to the simulator.
This commit fixes it by increasing timeout on polling functions
if working with simulator.
Signed-off-by: Dalit Ben Zoor <dbenzoor@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
After removing the parsing of the command submission
when doing memset of the device memory, goya_validate_dma_pkt_host
is never called by the kernel, so there is no need to check
context id.
Signed-off-by: Dalit Ben Zoor <dbenzoor@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
use_virt_addr member was used for telling whether to treat the
addresses in the CB as virtual during parsing. We disabled it only
when calling the parser from the driver memset device function,
and since this call had been removed, it should always be enabled.
Signed-off-by: Dalit Ben Zoor <dbenzoor@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Routing device accesses to the host memory requires the usage of a base
offset, which is canceled by the iATU just before leaving the device.
The value of the base offset might be distinctive between different ASIC
types.
The manipulation of the addresses is currently used throughout the
driver code, and one should be aware to it whenever providing a host
memory address to the device.
This patch removes this manipulation from the driver common code, and
moves it to the ASIC specific functions that are responsible for
host memory allocation/mapping.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch renames four functions in the ASIC-specific functions section,
so it will be easier to differentiate them from the generic kernel
functions with the same name.
This will help in future code reviews, to make sure we don't use the
kernel functions directly.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
There is no need to parse the command submission when doing memset
of the device memory using the DMA engine because only the driver calls
the memset function and therefore, the CS is trusted and doesn't require
validation and patching.
Signed-off-by: Dalit Ben Zoor <dbenzoor@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The device's CPU accessible memory on host is managed in a dedicated
pool, except for 2 regions - Primary Queue (PQ) and Event Queue (EQ) -
which are allocated from generic DMA pools.
Due to address length limitations of the CPU, the addresses of all these
memory regions must have the same MSBs starting at bit 40.
This patch modifies the allocation of the PQ and EQ to be also from the
dedicated pool, to ensure compliance with the limitation.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch changes the ASIC interface function that changes the DRAM bar
window. The change is to return the old address that the DRAM bar pointed
to instead of an error code.
This simplifies the code that use this function (mainly in debugfs) to
restore the bar to the old setting.
This is also needed for easier support in future ASICs.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
this patch fixes rts5260 power saving parameter
make power saving function work on L1.1, L1.2
Signed-off-by: RickyWu <ricky_wu@realtek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch only does renaming of certain variables and structure members,
and their accompanied comments.
This is done to better reflect the actions these variables and members
represent.
There is no functional change in this patch.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
We have supported per-device dma_map_ops in generic code for a long
time, and this symbol just guards the inclusion of the dma_map_ops
registry used for vmd. Stop enabling it for anything but vmd.
No change in functionality intended.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20190410080220.21705-3-hch@lst.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch slightly changes the macros of RREG32 and WREG32, which are
used when reading or writing from registers.
Instead of directly calling a function in the common code from these
macros, the new code calls a function from the ASIC functions interface.
This change allows us to share much more code between real ASICs and
simulators, which in turn reduces the maintenance burden and
the chances for forgetting to port code between the ASIC files.
The patch also implements the hl_poll_timeout macro, instead of calling
the generic readl_poll_timeout macro. This is required to allow use of
this macro in the simulator files.
As a result from this change, more functions in goya.c are shared with the
simulator and therefore, should not be defined as static.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds missing fields of start address 0 and 1 in the bmon
parameter structure that is received from the user in the debug IOCTL.
Without these fields, the functionality of the bmon trace is broken,
because there is no configuration of the base address of the filter of the
bus monitor.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch re-factors goya_parse_cb_no_ext_queue() to make it more
readable by inverting the check inside the first if statement so the bulk
of the function won't be inside an if statement.
The patch also fixes a spelling error in the name of the function.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
pr_fmt() should be defined before including linux/printk.h, either
directly or indirectly, in order to avoid redefinition of the macro.
Currently the macro definition is in habanalabs.h, which is included in
many files, and that makes the addition/reorder of includes to be prone
to compilation errors.
This patch cancels this dependency by defining the macro only in the few
source files that use it.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Fix up mixed declarations and code in aspeed_p2a_mmap.
Tested: Verified the build had the error and that this patch resolved it
and there were no other warnings or build errors associated with
compilation of this driver.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Patrick Venture <venture@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is an out-of-bounds access to "config[len - 1]" array when the
variable "len" is zero.
See commit dada6a43b0 ("kgdboc: fix KASAN global-out-of-bounds bug
in param_set_kgdboc_var()") for details.
Signed-off-by: Young Xiao <YangX92@hotmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pointer should be printed with %p or %px rather than
cast to long long type and printed with %016llx.
Change %x to %p to print the pointer.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Expose mei device state to user-space through sysfs.
This gives indication to applications that driver is in transition,
usefully mostly to detect link reset state.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The mei/hdcp module have its own Makefile
so naturally it should have associated Kconfig
in the same directory.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ASPEED AST2400, and AST2500 in some configurations include a
PCI-to-AHB MMIO bridge. This bridge allows a server to read and write
in the BMC's physical address space. This feature is especially useful
when using this bridge to send large files to the BMC.
The host may use this to send down a firmware image by staging data at a
specific memory address, and in a coordinated effort with the BMC's
software stack and kernel, transmit the bytes.
This driver enables the BMC to unlock the PCI bridge on demand, and
configure it via ioctl to allow the host to write bytes to an agreed
upon location. In the primary use-case, the region to use is known
apriori on the BMC, and the host requests this information. Once this
request is received, the BMC's software stack will enable the bridge and
the region and then using some software flow control (possibly via IPMI
packets), copy the bytes down. Once the process is complete, the BMC
will disable the bridge and unset any region involved.
The default behavior of this bridge when present is: enabled and all
regions marked read-write. This driver will fix the regions to be
read-only and then disable the bridge entirely.
The memory regions protected are:
* BMC flash MMIO window
* System flash MMIO windows
* SOC IO (peripheral MMIO)
* DRAM
The DRAM region itself is all of DRAM and cannot be further specified.
Once the PCI bridge is enabled, the host can read all of DRAM, and if
the DRAM section is write-enabled, then it can write to all of it.
Signed-off-by: Patrick Venture <venture@google.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mmiowb() is now implied by spin_unlock() on architectures that require
it, so there is no reason to call it from driver code. This patch was
generated using coccinelle:
@mmiowb@
@@
- mmiowb();
and invoked as:
$ for d in drivers include/linux/qed sound; do \
spatch --include-headers --sp-file mmiowb.cocci --dir $d --in-place; done
NOTE: mmiowb() has only ever guaranteed ordering in conjunction with
spin_unlock(). However, pairing each mmiowb() removal in this patch with
the corresponding call to spin_unlock() is not at all trivial, so there
is a small chance that this change may regress any drivers incorrectly
relying on mmiowb() to order MMIO writes between CPUs using lock-free
synchronisation. If you've ended up bisecting to this commit, you can
reintroduce the mmiowb() calls using wmb() instead, which should restore
the old behaviour on all architectures other than some esoteric ia64
systems.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
During hard-reset, contexts are closed as part of the tear-down process.
After a context is closed, the driver cleans up the page tables of that
context in the device's DRAM. This action is both dangerous and
unnecessary.
It is unnecessary, because the device is going through a hard-reset, which
means the device's DRAM contents are no longer valid and the device's MMU
is being reset.
It is dangerous, because if the hard-reset came as a result of a PCI
freeze, this action may cause the entire host machine to hang.
Therefore, prevent all device PTE updates when a hard-reset operation is
pending.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch makes some improvement in how IOCTLs behave when the device is
disabled or under reset.
The new code checks, at the start of every IOCTL, if the device is
disabled or in reset. If so, it prints an appropriate kernel message and
returns -EBUSY to user-space.
In addition, the code modifies the location of where the
hard_reset_pending flag is being set or cleared:
1. It is now cleared immediately after the reset *tear-down* flow is
finished but before the re-initialization flow begins.
2. It is being set in the remove function of the device, to make the
behavior the same with the hard-reset flow
There are two exceptions to the disable or in reset check:
1. The HL_INFO_DEVICE_STATUS opcode in the INFO IOCTL. This opcode allows
the user to inquire about the status of the device, whether it is
operational, in reset or malfunction (disabled). If the driver will
block this IOCTL, the user won't be able to retrieve the status in
case of malfunction or in reset.
2. The WAIT_FOR_CS IOCTL. This IOCTL allows the user to inquire about the
status of a CS. We want to allow the user to continue to do so, even if
we started a soft-reset process because it will allow the user to get
the correct error code for each CS he submitted.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch fixes a bug in the implementation of the function that removes
the device.
The bug can happen when the device is removed but not the driver itself
(e.g. remove by the OS due to PCI freeze in Power architecture).
In that case, there maybe open users that are calling IOCTLs while the
device is removed. This is a possible race condition that the driver must
handle. Otherwise, a kernel panic may occur.
This race is prevented in the hard-reset flow, because the driver makes
sure the users are closed before continuing with the hard-reset. This
race can not occur when the driver itself is removed because the OS makes
sure all the file descriptors are closed.
The fix is to make sure the open users close their file descriptors and if
they don't (after a certain amount of time), the driver sends them a
SIGKILL, because the remove of the device can't be stopped.
The patch re-uses the same code that is called from the hard-reset flow.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
To make the memory ioctl code more readable, this patch moves the
legacy/debug code path of mmu-disabled to a separate function, which is
called (if necessary) from the main memory ioctl function.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch removes the enum value of ASIC_AUTO_DETECT because we can use
the validity of the pdev variable to know whether we have a real device or
a simulator. For a real device, we detect the asic type from the device ID
while for a simulator, the simulator code calls create_hdev() with the
specified ASIC type.
Set ASIC_INVALID as the first option in the enum to make sure that no
other enum value will receive the value 0 (which indicates a non-existing
entry in the simulator array).
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
There be should check return value from dma_set_mask to throw some info
if fail to set dma mask.
Detected by CoverityScan, CID# 1443983: Error handling issues (CHECKED_RETURN)
Fixes: f6f9279f2b ("misc: fastrpc: Add Qualcomm fastrpc basic driver model")
Signed-off-by: Bo YU <tsu.yubo@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch does some refactoring in goya.c to make code more reusable
between goya code and the goya simulator code (which is not upstreamed).
In addition, the patch removes some dead functions from goya.c which are
not used by the current upstream code
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds the ASIC-specific function for GOYA to configure the
coresight components.
Most of the components have an enabled/disabled flag, depending on whether
the user wants to enable the component or disable it.
For some of the components, such as ETR and SPMU, the user can also
request to read values from them. Those values are needed for the user to
parse the trace data.
The ETR configuration is also checked for security purposes, to make sure
the trace data is written to the device's DRAM.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Habanalabs ASICs use the ARM coresight infrastructure to support debug,
tracing and profiling of neural networks topologies.
Because the coresight is configured using register writes and reads, and
some of the registers hold sensitive information (e.g. the address in
the device's DRAM where the trace data is written to), the user must go
through the kernel driver to configure this mechanism.
This patch implements the common code of the IOCTL and calls the
ASIC-specific function for the actual H/W configuration.
The IOCTL supports configuration of seven coresight components:
ETR, ETF, STM, FUNNEL, BMON, SPMU and TIMESTAMP
The user specifies which component he wishes to configure and provides a
pointer to a structure (located in its process space) that contains the
relevant configuration.
The common code copies the relevant data from the user-space to kernel
space and then calls the ASIC-specific function to do the H/W
configuration.
After the configuration is done, which is usually composed
of several IOCTL calls depending on what the user wanted to trace, the
user can start executing the topology. The trace data will be written to
the user's area in the device's DRAM.
After the tracing operation is complete, and user will call the IOCTL
again to disable the tracing operation. The user also need to read
values from registers for some of the components (e.g. the size of the
trace data in the device's DRAM). In that case, the user will provide a
pointer to an "output" structure in user-space, which the IOCTL code will
fill according the to selected component.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch removes an extra ; after the closing brackets of a while loop.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Unmapping ptes in the device MMU on Palladium can take a long time, which
can cause a kernel BUG of CPU soft lockup.
This patch minimize the chances for this bug by sleeping a little between
unmapping ptes.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
GIT does not like extra blank lines at the end of the file, so this patch
removes those lines.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Because DMA #0 is now used by the user, remove the limitation of credits
from this channel. Without this patch, this channel is pretty much
unusable due to its very low bandwidth configuration.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch adds a new opcode to INFO IOCTL that returns the device status.
This will allow users to query the device status in order to avoid sending
command submissions while device is in reset.
Signed-off-by: Dalit Ben Zoor <dbenzoor@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This patch allows the user to modify the TPC PLL clock relaxation value
on-the-fly in order to reduce power consumption.
To enable this, the patch removes the protection from the specific
register that controls this behavior.
Signed-off-by: Dalit Ben Zoor <dbenzoor@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
On init or context switch, set TPC clock relaxation counter
register to a golden value.
Signed-off-by: Dalit Ben Zoor <dbenzoor@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Hard-reset of our device should never fail, due to dangers of permanent
damage to the H/W.
This patch removes the last place in the reset path where the driver might
exit before doing the actual reset.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This has been a slightly more active cycle than normal with ongoing core
changes and quite a lot of collected driver updates.
- Various driver fixes for bnxt_re, cxgb4, hns, mlx5, pvrdma, rxe
- A new data transfer mode for HFI1 giving higher performance
- Significant functional and bug fix update to the mlx5 On-Demand-Paging MR
feature
- A chip hang reset recovery system for hns
- Change mm->pinned_vm to an atomic64
- Update bnxt_re to support a new 57500 chip
- A sane netlink 'rdma link add' method for creating rxe devices and fixing
the various unregistration race conditions in rxe's unregister flow
- Allow lookup up objects by an ID over netlink
- Various reworking of the core to driver interface:
* Drivers should not assume umem SGLs are in PAGE_SIZE chunks
* ucontext is accessed via udata not other means
* Start to make the core code responsible for object memory
allocation
* Drivers should convert struct device to struct ib_device
via a helper
* Drivers have more tools to avoid use after unregister problems
-----BEGIN PGP SIGNATURE-----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=p12E
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This has been a slightly more active cycle than normal with ongoing
core changes and quite a lot of collected driver updates.
- Various driver fixes for bnxt_re, cxgb4, hns, mlx5, pvrdma, rxe
- A new data transfer mode for HFI1 giving higher performance
- Significant functional and bug fix update to the mlx5
On-Demand-Paging MR feature
- A chip hang reset recovery system for hns
- Change mm->pinned_vm to an atomic64
- Update bnxt_re to support a new 57500 chip
- A sane netlink 'rdma link add' method for creating rxe devices and
fixing the various unregistration race conditions in rxe's
unregister flow
- Allow lookup up objects by an ID over netlink
- Various reworking of the core to driver interface:
- drivers should not assume umem SGLs are in PAGE_SIZE chunks
- ucontext is accessed via udata not other means
- start to make the core code responsible for object memory
allocation
- drivers should convert struct device to struct ib_device via a
helper
- drivers have more tools to avoid use after unregister problems"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (280 commits)
net/mlx5: ODP support for XRC transport is not enabled by default in FW
IB/hfi1: Close race condition on user context disable and close
RDMA/umem: Revert broken 'off by one' fix
RDMA/umem: minor bug fix in error handling path
RDMA/hns: Use GFP_ATOMIC in hns_roce_v2_modify_qp
cxgb4: kfree mhp after the debug print
IB/rdmavt: Fix concurrency panics in QP post_send and modify to error
IB/rdmavt: Fix loopback send with invalidate ordering
IB/iser: Fix dma_nents type definition
IB/mlx5: Set correct write permissions for implicit ODP MR
bnxt_re: Clean cq for kernel consumers only
RDMA/uverbs: Don't do double free of allocated PD
RDMA: Handle ucontext allocations by IB/core
RDMA/core: Fix a WARN() message
bnxt_re: fix the regression due to changes in alloc_pbl
IB/mlx4: Increase the timeout for CM cache
IB/core: Abort page fault handler silently during owning process exit
IB/mlx5: Validate correct PD before prefetch MR
IB/mlx5: Protect against prefetch of invalid MR
RDMA/uverbs: Store PR pointer before it is overwritten
...
-----BEGIN PGP SIGNATURE-----
iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAlyCpL0UHGJoZWxnYWFz
QGdvb2dsZS5jb20ACgkQWYigwDrT+vzoHw//ZyFbwekF0mV3RZwcV35LkScIOw0d
O1DgjJo8UbuV51+/foQeUZ8IzjHlybQhoFdJupPuw+LyaDUkwqjAmdtY8J/FjWSm
AJeVzu6gMF0Z9kwwGO4NyqX2EWluTD0xNLgf8g+fe3p1MtEuH6VCrqe+hk3wma0K
CrSIKWY/sO408SpAaWiLTEZmVT+hXiP9hJw1qTrbqKLtyWa4oCjErdoyUDsA01+5
gPndKC/3pu6q6q9Dd94582HuQaE2dKHWQXx6Fzd/tdCyYffpbOUAUNP3aRXaTKrS
MwKxOF3y7yUnz5RbxRgopwNVf5WyXhCnnPZRLaSxqnTSZCY6FCUi3l6RpVyWu2Ha
iztBbkTP/x6WV3VWg810qgQKQ9wl8oALMkoOfR6lWCR7MTuJnMXJtbrz0jWpEC2O
ZPwK9fAxFj2/3e13hx88O7Ek8kfajTPM8T15K79pvpljfqa0BD9SrhPyQ5ssmxj4
idz4yIFCATULKszPXA1QbfC1/xCDveQOEPSerL3eACXsLN17vfpOwOT9vWJm6bpr
6u5ggM2dEA07eI1ANnY6twn5g0kSYU9qISNQO98tA86IvaCnME0Z+k+SCwUNIM9U
ep9k0NdAGDNsYOfdVEEY0fYGT9k+9f9w8AfZLNvh0N3s7mGQQ35jf0Z75jj/jsor
cbMcPAN2jOCyFVs=
=vf9L
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
- Use match_string() instead of reimplementing it (Andy Shevchenko)
- Enable SERR# forwarding for all bridges (Bharat Kumar Gogada)
- Use Latency Tolerance Reporting if already enabled by platform (Bjorn
Helgaas)
- Save/restore LTR info for suspend/resume (Bjorn Helgaas)
- Fix DPC use of uninitialized data (Dongdong Liu)
- Probe bridge window attributes only once at enumeration-time to fix
device accesses during rescan (Bjorn Helgaas)
- Return BAR size (not "size -1 ") from pci_size() to simplify code (Du
Changbin)
- Use config header type (not class code) identify bridges more
reliably (Honghui Zhang)
- Work around Intel Denverton incorrect Trace Hub BAR size reporting
(Alexander Shishkin)
- Reorder pciehp cached state/hardware state updates to avoid missed
interrupts (Mika Westerberg)
- Turn ibmphp semaphores into completions or mutexes (Arnd Bergmann)
- Mark expected switch fall-through (Mathieu Malaterre)
- Use of_node_name_eq() for node name comparisons (Rob Herring)
- Add ACS and pciehp quirks for HXT SD4800 (Shunyong Yang)
- Consolidate Rohm Vendor ID definitions (Andy Shevchenko)
- Use u32 (not __u32) for things not exposed to userspace (Logan
Gunthorpe)
- Fix locking semantics of bus and slot reset interfaces (Alex
Williamson)
- Update PCIEPORTBUS Kconfig help text (Hou Zhiqiang)
- Allow portdrv to claim subtractive decode Ports so PCIe services will
work for them (Honghui Zhang)
- Report PCIe links that become degraded at run-time (Alexandru
Gagniuc)
- Blacklist Gigabyte X299 Root Port power management to fix Thunderbolt
hotplug (Mika Westerberg)
- Revert runtime PM suspend/resume callbacks that broke PME on network
cable plug (Mika Westerberg)
- Disable Data Link State Changed interrupts to prevent wakeup
immediately after suspend (Mika Westerberg)
- Extend altera to support Stratix 10 (Ley Foon Tan)
- Allow building altera driver on ARM64 (Ley Foon Tan)
- Replace Douglas with Tom Joseph as Cadence PCI host/endpoint
maintainer (Lorenzo Pieralisi)
- Add DT support for R-Car RZ/G2E (R8A774C0) (Fabrizio Castro)
- Add dra72x/dra74x/dra76x SoC compatible strings (Kishon Vijay Abraham I)
- Enable x2 mode support for dra72x/dra74x/dra76x SoC (Kishon Vijay
Abraham I)
- Configure dra7xx PHY to PCIe mode (Kishon Vijay Abraham I)
- Simplify dwc (remove unnecessary header includes, name variables
consistently, reduce inverted logic, etc) (Gustavo Pimentel)
- Add i.MX8MQ support (Andrey Smirnov)
- Add message to help debug dwc MSI-X mask bit errors (Gustavo
Pimentel)
- Work around imx7d PCIe PLL erratum (Trent Piepho)
- Don't assert qcom reset GPIO during probe (Bjorn Andersson)
- Skip dwc MSI init if MSIs have been disabled (Lucas Stach)
- Use memcpy_fromio()/memcpy_toio() instead of plain memcpy() in PCI
endpoint framework (Wen Yang)
- Add interface to discover supported endpoint features to replace a
bitfield that wasn't flexible enough (Kishon Vijay Abraham I)
- Implement the new supported-feature interface for designware-plat,
dra7xx, rockchip, cadence (Kishon Vijay Abraham I)
- Fix issues with 64-bit BAR in endpoints (Kishon Vijay Abraham I)
- Add layerscape endpoint mode support (Xiaowei Bao)
- Remove duplicate struct hv_vp_set in favor of struct hv_vpset (Maya
Nakamura)
- Rework hv_irq_unmask() to use cpumask_to_vpset() instead of
open-coded reimplementation (Maya Nakamura)
- Align Hyper-V struct retarget_msi_interrupt arguments (Maya Nakamura)
- Fix mediatek MMIO size computation to enable full size of available
MMIO space (Honghui Zhang)
- Fix mediatek DMA window size computation to allow endpoint DMA access
to full DRAM address range (Honghui Zhang)
- Fix mvebu prefetchable BAR regression caused by common bridge
emulation that assumed all bridges had prefetchable windows (Thomas
Petazzoni)
- Make advk_pci_bridge_emul_ops static (Wei Yongjun)
- Configure MPS settings for VMD root ports (Jon Derrick)
* tag 'pci-v5.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (92 commits)
PCI: Update PCIEPORTBUS Kconfig help text
PCI: Fix "try" semantics of bus and slot reset
PCI/LINK: Report degraded links via link bandwidth notification
dt-bindings: PCI: altera: Add altr,pcie-root-port-2.0
PCI: altera: Enable driver on ARM64
PCI: altera: Add Stratix 10 PCIe support
PCI/PME: Fix possible use-after-free on remove
PCI: aardvark: Make symbol 'advk_pci_bridge_emul_ops' static
PCI: dwc: skip MSI init if MSIs have been explicitly disabled
PCI: hv: Refactor hv_irq_unmask() to use cpumask_to_vpset()
PCI: hv: Replace hv_vp_set with hv_vpset
PCI: hv: Add __aligned(8) to struct retarget_msi_interrupt
PCI: mediatek: Enlarge PCIe2AHB window size to support 4GB DRAM
PCI: mediatek: Fix memory mapped IO range size computation
PCI: dwc: Remove superfluous shifting in definitions
PCI: dwc: Make use of GENMASK/FIELD_PREP
PCI: dwc: Make use of BIT() in constant definitions
PCI: dwc: Share code for dw_pcie_rd/wr_other_conf()
PCI: dwc: Make use of IS_ALIGNED()
PCI: imx6: Add code to request/control "pcie_aux" clock for i.MX8MQ
...
Linus Torvalds