Turns out we need the pixel format fixup not only for the addfb ioctl,
but also for fbdev emulation code.
Ideally we would place it in drm_mode_legacy_fb_format(). That would
create alot of churn though, and most drivers don't care because they
never ever run on a big endian platform. So add a new
drm_driver_legacy_fb_format() function instead which looks at the
mode_config->quirk_addfb_prefer_host_byte_order flag.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180921134704.12826-2-kraxel@redhat.com
This is a new pull for drm-next on top of last weeks with the following
changes:
- Fixed 64 bit divide
- Fixed vram type on vega20
- Misc vega20 fixes
- Misc DC fixes
- Fix GDS/GWS/OA domain handling
Previous changes from last week:
amdgpu/kfd:
- Picasso (new APU) support
- Raven2 (new APU) support
- Vega20 enablement
- ACP powergating improvements
- Add ABGR/XBGR display support
- VCN JPEG engine support
- Initial xGMI support
- Use load balancing for engine scheduling
- Lots of new documentation
- Rework and clean up i2c and aux handling in DC
- Add DP YCbCr 4:2:0 support in DC
- Add DMCU firmware loading for Raven (used for ABM and PSR)
- New debugfs features in DC
- LVDS support in DC
- Implement wave kill for gfx/compute (light weight reset for shaders)
- Use AGP aperture to avoid gart mappings when possible
- GPUVM performance improvements
- Bulk moves for more efficient GPUVM LRU handling
- Merge amdgpu and amdkfd into one module
- Enable gfxoff and stutter mode on Raven
- Misc cleanups
Scheduler:
- Load balancing support
- Bug fixes
ttm:
- Bulk move functionality
- Bug fixes
radeon:
- Misc cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920150438.12693-1-alexander.deucher@amd.com
UAPI Changes:
- None
Cross-subsystem Changes:
- None
Core Changes:
- Allow drivers to disable features with per-device granularity (Ville)
- Use EOPNOTSUPP when iface/feature is unsupported instead of
EINVAL/errno soup (Chris)
- Simplify M/N DP quirk by using constant N to limit size of M/N (Shawn)
- add quirk for LG LP140WF6-SPM1 eDP panel (Shawn)
Driver Changes:
- i915/amdgpu: Disable DRIVER_ATOMIC for older/unsupported devices (Ville)
- sun4i: add support for R40 HDMI PHY (Icenowy)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Lee, Shawn C <shawn.c.lee@intel.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAluiqZAACgkQlvcN/ahK
BwrD7gf+O9hI1+sWAKs9/D2xz5G0Ap/wTUtPZprVx+UMg833T4E3q5esSTvlKd5q
QdijWWFZ3Eu7osQB5QTvCHpJ1F1Q9DScYdD5rd0WRhZBGnBd2guFziFRhleXpQH1
CTo/xjS4Y1l1wEildvZdjPaDfXE0Q+uK8kl11AIVoYQvW6V28/pwCW+mmfMfQG4D
lC9Lj5iPTDGLmbT3DZcH9ZUU8CZreJVPDn+mi8XsAOGt55YlCphl5XsOabNRzpCh
5VYZbauJqrlfa3/cbVuFpTqjqR5XRlMvzgdYH2Wa+9JreiReNCDs3CVL4YnLWe0p
PIfE6ZC2ucX831aZOodV7KtwtLYc/Q==
=oPPq
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2018-09-19' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 4.20:
UAPI Changes:
- None
Cross-subsystem Changes:
- None
Core Changes:
- Allow drivers to disable features with per-device granularity (Ville)
- Use EOPNOTSUPP when iface/feature is unsupported instead of
EINVAL/errno soup (Chris)
- Simplify M/N DP quirk by using constant N to limit size of M/N (Shawn)
- add quirk for LG LP140WF6-SPM1 eDP panel (Shawn)
Driver Changes:
- i915/amdgpu: Disable DRIVER_ATOMIC for older/unsupported devices (Ville)
- sun4i: add support for R40 HDMI PHY (Icenowy)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Lee, Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20180919200218.GA186644@art_vandelay
Some DP dongles in particular seem to be fussy about too large
link M/N values. Set specific value for N divider can resolve
this issue per dongle vendor's comment. So configure N as
constant value (0x8000) to instead of reduce M/N formula when
specific DP dongle connected.
v2: add more comments for issue description and fix typo.
v3: add lost commit messages back for version 2
v4: send patch to both intel-gfx and dri-devel
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Tested-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Lee, Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1536733371-25004-3-git-send-email-shawn.c.lee@intel.com
Treat them all as Raven rather than adding a new picasso
asic type. This simplifies a lot of code and also handles the
case of rv2 chips with the 0x15d8 pci id. It also fixes dmcu
fw handling for picasso.
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
UAPI Changes:
- Add host endian variants for the most common formats (Gerd)
- Fail ADDFB2 for big-endian drivers that don't advertise BE quirk (Gerd)
- clear smem_start in fbdev for drm drivers to avoid leaking fb addr (Daniel)
Cross-subsystem Changes:
Core Changes:
- fix drm_mode_addfb() on big endian machines (Gerd)
- add timeline point to syncobj find+replace (Chunming)
- more drmP.h removal effort (Daniel)
- split uapi portions of drm_atomic.c into drm_atomic_uapi.c (Daniel)
Driver Changes:
- bochs: Convert open-coded portions to use helpers (Peter)
- vkms: Add cursor support (Haneen)
- udmabuf: Lots of fixups (mostly cosmetic afaict) (Gerd)
- qxl: Convert to use fbdev helper (Peter)
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Chunming Zhou <david1.zhou@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Peter Wu <peter@lekensteyn.nl>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAluaXuAACgkQlvcN/ahK
BwrQHggAtcu96+plN6cDcMcoOfnQT/OG30dBER4/cpG05hEciq/NXwXBQ9dPWtqk
Nkcgst28UbXTmt0UKck7ibfePLVqnN7+yRqnj3yrD28Qjrg1Ewr0go8cKlIJ8+8t
E6aLvgRwx5/9sHHaeCC1K1qfowEr0Put9DQvLH2BVRM3C1Sj5BXeXMP4djb5PHGU
BYGLoN9DrrVHLVARwbmzSb8V5oLED2CdRkL7WpXC2LcEGZ3jPllTN8EOoqsIMOAZ
LGnpWxADVnYTA5np3O0QJsalu942T4rMPoxgCHZmuGIhEijqk7mgGWpeOmzN71Eh
rXX1yyWvZenUc69Pbl7G7lQmE6DSDw==
=9Mxt
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2018-09-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 4.20:
UAPI Changes:
- Add host endian variants for the most common formats (Gerd)
- Fail ADDFB2 for big-endian drivers that don't advertise BE quirk (Gerd)
- clear smem_start in fbdev for drm drivers to avoid leaking fb addr (Daniel)
Cross-subsystem Changes:
Core Changes:
- fix drm_mode_addfb() on big endian machines (Gerd)
- add timeline point to syncobj find+replace (Chunming)
- more drmP.h removal effort (Daniel)
- split uapi portions of drm_atomic.c into drm_atomic_uapi.c (Daniel)
Driver Changes:
- bochs: Convert open-coded portions to use helpers (Peter)
- vkms: Add cursor support (Haneen)
- udmabuf: Lots of fixups (mostly cosmetic afaict) (Gerd)
- qxl: Convert to use fbdev helper (Peter)
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Chunming Zhou <david1.zhou@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Peter Wu <peter@lekensteyn.nl>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20180913130254.GA156437@art_vandelay
We wish to control certain driver_features flags on a per-device basis
while still sharing a single drm_driver instance across all the
devices. To that end introduce device.driver_features. By default
it will be set to ~0 to not impose any limits beyond
driver.driver_features. Drivers can then clear specific flags
in the per-device bitmask to limit the capabilities of the device.
An alternative approach would be to copy the driver_features from
the driver into the device in drm_dev_init(), however that would
require verifying that no driver is currently changing
driver.driver_features after drm_dev_init(). Hence the ~0 apporach
was easier.
Ideally we'd also make drm_driver const but there is plenty of code
left that wants to mutate it (eg. various vfunc assignments). We'll
need to fix all that up before we can make it const.
And while at it fix up the type of the feature flag passed to
drm_core_check_feature().
v2: Streamline the && vs. & (Chris)
s/int/u32/ in drm_core_check_feature() args
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180913131622.17690-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Merge tag 'gvt-next-2018-09-04'
drm-intel-next-2018-09-06-1:
UAPI Changes:
- GGTT coherency GETPARAM: GGTT has turned out to be non-coherent for some
platforms, which we've failed to communicate to userspace so far. SNA was
modified to do extra flushing on non-coherent GGTT access, while Mesa will
mitigate by always requiring WC mapping (which is non-coherent anyway).
- Neuter Resource Streamer uAPI: There never really were users for the feature,
so neuter it while keeping the interface bits for compatibility. This is a
long due item from past.
Cross-subsystem Changes:
- Backmerge of branch drm-next-4.19 for DP_DPCD_REV_14 changes
Core Changes:
- None
Driver Changes:
- A load of Icelake (ICL) enabling patches (Paulo, Manasi)
- Enabled full PPGTT for IVB,VLV and HSW (Chris)
- Bugzilla #107113: Distribute DDB based on display resolutions (Mahesh)
- Bugzillas #100023,#107476,#94921: Support limited range DP displays (Jani)
- Bugzilla #107503: Increase LSPCON timeout (Fredrik)
- Avoid boosting GPU due to an occasional stall in interactive workloads (Chris)
- Apply GGTT coherency W/A only for affected systems instead of all (Chris)
- Fix for infinite link training loop for faulty USB-C MST hubs (Nathan)
- Keep KMS functional on Gen4 and earlier when GPU is wedged (Chris)
- Stop holding ppGTT reference from closed VMAs (Chris)
- Clear error registers after error capture (Lionel)
- Various Icelake fixes (Anusha, Jyoti, Ville, Tvrtko)
- Add missing Coffeelake (CFL) PCI IDs (Rodrigo)
- Flush execlists tasklet directly from reset-finish (Chris)
- Fix LPE audio runtime PM (Chris)
- Fix detection of out of range surface positions (GLK/CNL) (Ville)
- Remove wait-for-idle for PSR2 (Dhinakaran)
- Power down existing display hardware resources when display is disabled (Chris)
- Don't allow runtime power management if RC6 doesn't exist (Chris)
- Add debugging checks for runtime power management paths (Imre)
- Increase symmetry in display power init/fini paths (Imre)
- Isolate GVT specific macros from i915_reg.h (Lucas)
- Increase symmetry in power management enable/disable paths (Chris)
- Increase IP disable timeout to 100 ms to avoid DRM_ERROR (Imre)
- Fix memory leak from HDMI HDCP write function (Brian, Rodrigo)
- Reject Y/Yf tiling on interlaced modes (Ville)
- Use a cached mapping for the physical HWS on older gens (Chris)
- Force slow path of writing relocations to buffer if unable to write to userspace (Chris)
- Do a full device reset after being wedged (Chris)
- Keep forcewake counts over reset (in case of debugfs user) (Imre, Chris)
- Avoid false-positive errors from power wells during init (Imre)
- Reset engines forcibly in exchange of declaring whole device wedged (Mika)
- Reduce context HW ID lifetime in preparation for Icelake (Chris)
- Attempt to recover from module load failures (Chris)
- Keep select interrupts over a reset to avoid missing/losing them (Chris)
- GuC submission backend improvements (Jakub)
- Terminate context images with BB_END (Chris, Lionel)
- Make GCC evaluate GGTT view struct size assertions again (Ville)
- Add selftest to exercise suspend/hibernate code-paths for GEM (Chris)
- Use a full emulation of a user ppgtt context in selftests (Chris)
- Exercise resetting in the middle of a wait-on-fence in selftests (Chris)
- Fix coherency issues on selftests for Baytrail (Chris)
- Various other GEM fixes / self-test updates (Chris, Matt)
- GuC doorbell self-tests (Daniele)
- PSR mode control through debugfs for IGTs (Maarten)
- Degrade expected WM latency errors to DRM_DEBUG_KMS (Chris)
- Cope with errors better in MST link training (Dhinakaran)
- Fix WARN on KBL external displays (Azhar)
- Power well code cleanups (Imre)
- Fixes to PSR debugging (Dhinakaran)
- Make forcewake errors louder for easier catching in CI (WARNs) (Chris)
- Fortify tiling code against programmer errors (Chris)
- Bunch of fixes for CI exposed corner cases (multiple authors, mostly Chris)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180907105446.GA22860@jlahtine-desk.ger.corp.intel.com
This leaves all the commit/check and state handling in drm_atomic.c,
while pulling all the uapi glue and the huge ioctl itself into a
seprate file.
This seems to almost perfectly split the rather big drm_atomic.c file
into 2 equal sizes.
Also adjust the kerneldoc and type a very terse overview text.
v2: Rebase.
v3: Fix tiny typo.
v4:
- Fixup armada, newly converted atomic driver hooray!
- Fixup msm/dpu1, newly added too.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180905135711.28370-7-daniel.vetter@ffwll.ch
Remove the kerneldoc and EXPORT_SYMBOL which aren't used and really
shouldn't ever be used by drivers directly.
Unfortunately this means we need to move the set_writeback_fb function
around to avoid a forward decl.
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180905135711.28370-5-daniel.vetter@ffwll.ch
We have a bunch of neat little macros all over the place which should
move to kernel.h. But some of them died in bikesheds on lkml, and we
need a decent home for them.
Start out by moving the for_each_if macro there.
v2: Rename to drm_util.h instead (Dave&Sean)
Cc: Sean Paul <seanpaul@chromium.org>
Acked-by: Sean Paul <seanpaul@chromium.org>
Cc: Dave Airlie <airlied@gmail.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180905135711.28370-1-daniel.vetter@ffwll.ch
we can place a fence to a timeline point after expanded.
v2: change func parameter order
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/246543/
we can fetch timeline point fence after expanded.
v2: The parameter fence is the result of the function and should come last.
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/246541/
Userspace on big endian machhines typically expects the ADDFB ioctl
returns a big endian framebuffer. drm_mode_addfb() will call
drm_mode_addfb2() unconditionally with little endian DRM_FORMAT_*
values though, which is wrong. This patch fixes that.
Drivers (both kernel and xorg) have quirks in place to deal with the
broken drm_mode_addfb() behavior. Because of this we can't just change
drm_mode_addfb() behavior for everybody without breaking things. Add
the quirk_addfb_prefer_host_byte_order field to mode_config, so drivers
can opt-in.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180905060445.15008-5-kraxel@redhat.com
Almost all PCI drivers using remove_conflicting_framebuffers() wrap it
with the same code.
v2: add kerneldoc for DRM helper
v3: propagate remove_conflicting_framebuffers() return value
+ move kerneldoc to where function is implemented
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/7db1c278276de420eb45a1b71d06b5eb6bbd49ef.1535810304.git.mirq-linux@rere.qmqm.pl
Adds docs for pixel_blend_mode in drm_plane_state. Fixes the warning
found by kbuild test robot:
htmldocs: include/drm/drm_plane.h:189: warning: Function parameter or member 'pixel_blend_mode' not described in 'drm_plane_state'
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Lowry Li <lowry.li@arm.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180831150934.202332-1-sean@poorly.run
This function allow us to bulk move a group of BOs to the tail of their LRU.
The positions of group of BOs are stored on the (first, last) bulk_move_pos
structure.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When move a BO to the end of LRU, it need remember the BO positions.
Make sure all moved bo in between "first" and "last". And they will be bulk
moving together.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add bulk move pos to store the pointer of first and last buffer object.
The list in between will be bulk moved on lru list.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The flag will prevent another thread from same process to
reinsert the entity queue into scheduler's rq after it was already
removewd from there by another thread during drm_sched_entity_flush.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is complex enough on it's own. Move it into a separate C file.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since we now deal with multiple rq we need to update all of them, not
just the current one.
v2: Trivial: Removed unused variable (Alex)
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To keep track of the scheduler load.
Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are the potential run queues on which the jobs from this
entity can be scheduled. We will use this to do load balancing.
Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pixel blend modes represent the alpha blending equation
selection, describing how the pixels from the current
plane are composited with the background.
Adds a pixel_blend_mode to drm_plane_state and a
blend_mode_property to drm_plane, and related support
functions.
Defines three blend modes in drm_blend.h.
Changes since v1:
- Moves the blending equation into the DOC comment
- Refines the comments of drm_plane_create_blend_mode_property to not
enumerate the #defines, but instead the string values
- Uses fg.* instead of pixel.* and plane_alpha instead of plane.alpha
Changes since v2:
- Refines the comments of drm_plane_create_blend_mode_property:
1) Puts the descriptions (after the ":") on a new line
2) Adds explaining why @supported_modes need PREMUL as default
Changes since v3:
- Refines drm_plane_create_blend_mode_property(). drm_property_add_enum()
can calculate the index itself just fine, so no point in having the
caller pass it in.
- Since the current DRM assumption is that alpha is premultiplied
as default, define DRM_MODE_BLEND_PREMULTI as 0 will be better.
- Refines some comments.
Changes since v4:
- Adds comments in drm_blend.h.
- Removes setting default value in drm_plane_create_blend_mode_property()
as it is already in __drm_atomic_helper_plane_reset().
- Fixes to use state->pixel_blend_mode instead of using
plane->state->pixel_blend_mode in reset function.
- Rebases on drm-misc-next.
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Lowry Li <lowry.li@arm.com>
Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/245734/
This is used for handling future fences. Currently no driver use
these, and I think given the new timeline fence proposed by KHR it
would be better to have a more abstract interface for future fences.
Could be something simple like a struct dma_future_fence plus a
function to add a callback or wait for the fence to materialize.
Then syncobj (and anything else really) could grow new functions to
expose these two drivers. Normal dma_fence would then keep the nice
guarantee that they will always signal (and through ordering, be
deadlock free). dma_future_fence would then be the tricky one.
This also fixes sphinx complaining about the kerneldoc.
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180822092905.19884-1-daniel.vetter@ffwll.ch
This patch make changes to allocate crc-entries buffer before
enabling CRC generation.
It moves all the failure check early in the function before setting
the source or memory allocation.
Now set_crc_source takes only two variable inputs, values_cnt we
already gets as part of verify_crc_source.
Changes since V1:
- refactor code to use single spin lock
Changes since V2:
- rebase
Changes since V3:
- rebase on top of VKMS driver
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Leo Li <sunpeng.li@amd.com> (V2)
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> (V3)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180821083858.26275-3-mahesh1.kumar@intel.com
-----BEGIN PGP SIGNATURE-----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=g9rD
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"This is the main drm pull request for 4.19.
Rob has some new hardware support for new qualcomm hw that I'll send
along separately. This has the display part of it, the remaining pull
is for the acceleration engine.
This also contains a wound-wait/wait-die mutex rework, Peter has acked
it for merging via my tree.
Otherwise mostly the usual level of activity. Summary:
core:
- Wound-wait/wait-die mutex rework
- Add writeback connector type
- Add "content type" property for HDMI
- Move GEM bo to drm_framebuffer
- Initial gpu scheduler documentation
- GPU scheduler fixes for dying processes
- Console deferred fbcon takeover support
- Displayport support for CEC tunneling over AUX
panel:
- otm8009a panel driver fixes
- Innolux TV123WAM and G070Y2-L01 panel driver
- Ilitek ILI9881c panel driver
- Rocktech RK070ER9427 LCD
- EDT ETM0700G0EDH6 and EDT ETM0700G0BDH6
- DLC DLC0700YZG-1
- BOE HV070WSA-100
- newhaven, nhd-4.3-480272ef-atxl LCD
- DataImage SCF0700C48GGU18
- Sharp LQ035Q7DB03
- p079zca: Refactor to support multiple panels
tinydrm:
- ILI9341 display panel
New driver:
- vkms - virtual kms driver to testing.
i915:
- Icelake:
Display enablement
DSI support
IRQ support
Powerwell support
- GPU reset fixes and improvements
- Full ppgtt support refactoring
- PSR fixes and improvements
- Execlist improvments
- GuC related fixes
amdgpu:
- Initial amdgpu documentation
- JPEG engine support on VCN
- CIK uses powerplay by default
- Move to using core PCIE functionality for gens/lanes
- DC/Powerplay interface rework
- Stutter mode support for RV
- Vega12 Powerplay updates
- GFXOFF fixes
- GPUVM fault debugging
- Vega12 GFXOFF
- DC improvements
- DC i2c/aux changes
- UVD 7.2 fixes
- Powerplay fixes for Polaris12, CZ/ST
- command submission bo_list fixes
amdkfd:
- Raven support
- Power management fixes
udl:
- Cleanups and fixes
nouveau:
- misc fixes and cleanups.
msm:
- DPU1 support display controller in sdm845
- GPU coredump support.
vmwgfx:
- Atomic modesetting validation fixes
- Support for multisample surfaces
armada:
- Atomic modesetting support completed.
exynos:
- IPPv2 fixes
- Move g2d to component framework
- Suspend/resume support cleanups
- Driver cleanups
imx:
- CSI configuration improvements
- Driver cleanups
- Use atomic suspend/resume helpers
- ipu-v3 V4L2 XRGB32/XBGR32 support
pl111:
- Add Nomadik LCDC variant
v3d:
- GPU scheduler jobs management
sun4i:
- R40 display engine support
- TCON TOP driver
mediatek:
- MT2712 SoC support
rockchip:
- vop fixes
omapdrm:
- Workaround for DRA7 errata i932
- Fix mm_list locking
mali-dp:
- Writeback implementation
PM improvements
- Internal error reporting debugfs
tilcdc:
- Single fix for deferred probing
hdlcd:
- Teardown fixes
tda998x:
- Converted to a bridge driver.
etnaviv:
- Misc fixes"
* tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drm: (1506 commits)
drm/amdgpu/sriov: give 8s for recover vram under RUNTIME
drm/scheduler: fix param documentation
drm/i2c: tda998x: correct PLL divider calculation
drm/i2c: tda998x: get rid of private fill_modes function
drm/i2c: tda998x: move mode_valid() to bridge
drm/i2c: tda998x: register bridge outside of component helper
drm/i2c: tda998x: cleanup from previous changes
drm/i2c: tda998x: allocate tda998x_priv inside tda998x_create()
drm/i2c: tda998x: convert to bridge driver
drm/scheduler: fix timeout worker setup for out of order job completions
drm/amd/display: display connected to dp-1 does not light up
drm/amd/display: update clk for various HDMI color depths
drm/amd/display: program display clock on cache match
drm/amd/display: Add NULL check for enabling dp ss
drm/amd/display: add vbios table check for enabling dp ss
drm/amd/display: Don't share clk source between DP and HDMI
drm/amd/display: Fix DP HBR2 Eye Diagram Pattern on Carrizo
drm/amd/display: Use calculated disp_clk_khz value for dce110
drm/amd/display: Implement custom degamma lut on dcn
drm/amd/display: Destroy aux_engines only once
...
This bit was added to DP Training Aux RD interval with DP 1.3. Via
descriptiion of the spec this field indicates the panels true
capabilities are described in DPCD address space 02200h through 022FFh.
v2: version comment update
v3: version comment correction, commit message update
v4: white space correction
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
[manasi: fixup whitespace per Rodrigo's comment]
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180723212735.23893-1-matthew.s.atwood@intel.com
This patch introduce a callback function "get_crc_sources" which
will be called during read of control node. It is an optional
callback function and if driver implements this callback, driver
should return a constant pointer to an array of crc sources list
and update count according to the number of source in the list.
Changes Since V1: (Daniel)
- return const pointer to an array of crc sources list
- do validation of sources in CRC-core
Changes Since V2:
- update commit message
- update callback documentation
- print one source name per line
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180713135942.25061-3-mahesh1.kumar@intel.com
This patch adds a new callback function "verify_crc_source" which will
be used during setting the crc source in control node. This will help
in avoiding setting of wrong string for source.
Changes since V1:
- do not yet verify_crc_source during open.
Changes since V1:
- improve callback description
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180713135942.25061-2-mahesh1.kumar@intel.com
Fixes for 4.19:
- Fix UVD 7.2 instance handling
- Fix UVD 7.2 harvesting
- GPU scheduler fix for when a process is killed
- TTM cleanups
- amdgpu CS bo_list fixes
- Powerplay fixes for polaris12 and CZ/ST
- DC fixes for link training certain HMDs
- DC fix for vega10 blank screen in certain cases
From: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180801222906.1016-1-alexander.deucher@amd.com
There are a lot of drivers that subclass drm_plane_state, all of them
duplicate the code that links together the plane with plane_state.
On top of that, drivers that enable core properties also have to
duplicate the code for initializing the properties to their default
values, which in all cases are the same as the defaults from core.
Change since v1:
- Make it consistent with the other helpers and require that both
plane and state not be NULL, suggested by Boris Brezillon and
Philipp Zabel.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180804161530.12275-2-alexandru-cosmin.gheorghe@arm.com
These two helpers will be used on set page caching.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A bit larger this time around, due to introduction of "dpu1" support
for the display controller in sdm845 and beyond. This has been on
list and undergoing refactoring since Feb (going from ~110kloc to
~30kloc), and all my review complaints have been addressed, so I'd be
happy to see this upstream so further feature work can procede on top
of upstream.
Also includes the gpu coredump support, which should be useful for
debugging gpu crashes. And various other misc fixes and such.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGv-8y3zguY0Mj1vh=o+vrv_bJ8AwZ96wBXYPvMeQT2XcA@mail.gmail.com
Note which task is using the entity and only kill it if the last user of
the entity is killed. This should prevent problems when entities are leaked to
child processes.
v2: add missing kernel doc
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a puts function for the coredump printer to bypass printf()
for constant strings for a speed boost. Reorganize the
coredump printf callback to share as much code as possible.
v2: Try to reuse code between print and puts as suggested by
Chris Wilson
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Add a puts() function to use seq_puts() to help speed up
up print time for constant strings.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Add drm_puts() for a much faster path to print constant strings
into a drm_printer object with memcpy and friends. This can
have seconds off of really large outputs such as GPU dumps.
If the drm_printer object supports a custom puts function then
use that otherwise fall back to the slower legacy printf call.
v2: Add documentation for drm_puts() per Daniel Vetter
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
[robclark fix minor htmldocs warning]
Signed-off-by: Rob Clark <robdclark@gmail.com>
Add a drm printer suitable for use with the read callback for
devcoredump or other suitable buffer based output format that
isn't otherwise covered by seq_file.
v2: Add improved documentation per Daniel Vetter
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
This patch moves all non-x86 abstraction to the ttm_set_memory header.
It is to make function calling more clearly.
(v2): add ttm_ prefix.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Bas Nieuwenhuizen <basni@chromium.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The scheduler of the entity is decided by the run queue on which
it is queued. This patch avoids us the effort required to maintain
a sync between rq and sched field when we start shifting entites
among different rqs.
Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
entity has a scheduler field and we don't need the sched argument
in any of the functions where entity is provided.
Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
More features for 4.19:
- Map processes to vmids for debugging GPUVM faults
- Raven gfxoff fixes
- Initial gfxoff support for vega12
- Use defines for interrupt sources rather than magic numbers
- DC aux fixes
- Finish DC logging TODO
- Add more DC debugfs interfaces for conformance testing
- Add CRC support for DCN
- Scheduler rework in preparation for load balancing
- Unify common smu9 code
- Clean up UVD instancing support
- ttm cleanups
- Misc fixes and cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180719194001.3488-1-alexander.deucher@amd.com
Core Changes:
- add support for DisplayPort CEC-Tunneling-over-AUX (Hans Verkuil)
- more doc updates (Daniel Vetter)
- fourcc: Add is_yuv field to drm_format_info (Ayan Kumar Halder)
- dma-buf: correctly place BUG_ON (Michel Dänzer)
Driver Changes:
- more vkms support(Rodrigo Siqueira)
- many fixes and small improments to all drivers
-----BEGIN PGP SIGNATURE-----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=HyBh
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2018-07-18' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 4.19:
Core Changes:
- add support for DisplayPort CEC-Tunneling-over-AUX (Hans Verkuil)
- more doc updates (Daniel Vetter)
- fourcc: Add is_yuv field to drm_format_info (Ayan Kumar Halder)
- dma-buf: correctly place BUG_ON (Michel Dänzer)
Driver Changes:
- more vkms support(Rodrigo Siqueira)
- many fixes and small improments to all drivers
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180718200826.GA20165@juma
A lot of drivers duplicate the function to check if a format is yuv or not.
If we add a field (to denote whether the format is yuv or not) in the
drm_format_info table, all the drivers can use this field and it will
prevent duplication of similar logic.
Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531847626-22248-1-git-send-email-ayan.halder@arm.com
This is the final step for more generic support of DRM audio
component. The generic audio component code is now moved to its own
file, and the symbols are renamed from snd_hac_i915_* to
snd_hdac_acomp_*, respectively. The generic code is enabled via the
new kconfig, CONFIG_SND_HDA_COMPONENT, while CONFIG_SND_HDA_I915 is
kept as the super-class.
Along with the split, three new callbacks are added to audio_ops:
pin2port is for providing the conversion between the pin number and
the widget id, and master_bind/master_unbin are called at binding /
unbinding the master component, respectively. All these are optional,
but used in i915 implementation and also other later implementations.
A note about the new snd_hdac_acomp_init() function: there is a slight
difference between this and the old snd_hdac_i915_init(). The latter
(still) synchronizes with the master component binding, i.e. it
assures that the relevant DRM component gets bound when it returns, or
gives a negative error. Meanwhile the new function doesn't
synchronize but just leaves as is. It's the responsibility by the
caller's side to synchronize, or the caller may accept the
asynchronous binding on the fly.
v1->v2: Fix missing NULL check in master_bind/unbind
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For allowing other drivers to use the DRM audio component, rename the
i915_audio_component_* with drm_audio_component_*, and split the
generic part into drm_audio_component.h. The i915 specific stuff
remains in struct i915_audio_component, which contains
drm_audio_component as the base.
The license of drm_audio_component.h is kept to MIT as same as the the
original i915_component.h.
This is a preliminary change for further development, and no
functional changes by this patch itself, merely code-split and
renames.
v1->v2: Use SPDX for drm_audio_component.h, fix remaining i915
argument in drm_audio_component.h
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is something we've needed for a very long time now, as it makes
debugging issues with faulty MST hubs along with debugging issues
regarding us interfacing with hubs correctly vastly easier to debug.
Currently this can actually be done if you trace the i2c devices for DP
using ftrace but that's significantly less useful for a couple of
reasons:
- Tracing the i2c devices through ftrace means all of the traces are
going to contain a lot of "garbage" output that we're sending over the
i2c line. Most of this garbage comes from retrying transactions, DRM's
helper library adding extra transactions to work around bad hubs, etc.
- Having a user set up ftrace so that they can provide debugging
information is a lot more difficult then being able to say "just boot
with drm.debug=0x100"
- We can potentially expand upon this tracing in the future to print
debugging information in regards to other DP transactions like MST
sideband transactions
This is inspired by a patch Rob Clark sent to do this a long time back.
Neither of us could find the patch however, so we both assumed it would
probably just be easier to rewrite it anyway.
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180716154432.13433-1-lyude@redhat.com
replace run queue by a list of run queues and remove the
sched arg as that is part of run queue itself
Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is in preparation for a better load balancing in
scheduler. It allows us to associate entities with the
run queues instead of binding them to a scheduler.
Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
And use that opportunity to polish the kernel doc all around:
- Beef up some of the documentation.
- Intro text for drm_plane and better links
- Fix all the hyperlinks!
v2: Fix linebreaks.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-10-daniel.vetter@ffwll.ch
For consistency and to encourage more detailed documentation. While
doing this also beefed up a few of the comments, linking at least to
the setup function. Plus fixed all the hyperlinks.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-9-daniel.vetter@ffwll.ch
Since there's very few callers of these I've decided to do them all in
one patch. With this the unecessarily long drm_mode_connector_ prefix
is gone from the codebase! The only exception being struct
drm_mode_connector_set_property, which is part of the uapi so can't be
renamed.
Again done with sed+some manual fixups for indent issues.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-8-daniel.vetter@ffwll.ch
- switch everything over to inline comments
- add notes about locking, links to functions and other related stuff
- also include a note about Ville's soon-to-be-merged
drm_connector_for_each_possible_encoder().
Also check that all the hyperlinks in drm_connector.h work and fix
them as needed.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-5-daniel.vetter@ffwll.ch
Last bit the prevented us from starting to delete the drmP.h monster
includes from source files!
Also add kernel-doc while moving them.
A nice consistent drm_dev_ prefix would be cute for these, but since
they're used everywhere I've figured I'll leave this bikeshed aside
for now.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-2-daniel.vetter@ffwll.ch
If the user has created a read-only object, they should not be allowed
to circumvent the write protection by using a GGTT mmapping. Deny it.
Also most machines do not support read-only GGTT PTEs, so again we have
to reject attempted writes. Fortunately, this is known a priori, so we
can at least reject in the call to create the mmap (with a sanity check
in the fault handler).
v2: Check the vma->vm_flags during mmap() to allow readonly access.
v3: Remove VM_MAYWRITE to curtail mprotect()
Testcase: igt/gem_userptr_blits/readonly_mmap*
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com> #v1
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712185315.3288-4-chris@chris-wilson.co.uk
This adds support for the DisplayPort CEC-Tunneling-over-AUX
feature that is part of the DisplayPort 1.3 standard.
Unfortunately, not all DisplayPort/USB-C to HDMI adapters with a
chip that has this capability actually hook up the CEC pin, so
even though a CEC device is created, it may not actually work.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180711132909.25409-2-hverkuil@xs4all.nl
include/drm/tinydrm/tinydrm.h:34: warning: Function parameter or member 'fb_dirty' not described in 'tinydrm_device'
drivers/gpu/drm/tinydrm/mipi-dbi.c:272: warning: Function parameter or member 'crtc_state' not described in 'mipi_dbi_enable_flush'
drivers/gpu/drm/tinydrm/mipi-dbi.c:272: warning: Function parameter or member 'plane_state' not described in 'mipi_dbi_enable_flush'
Move struct member docs inline so it's not missed next time.
Cc: David Lechner <david@lechnology.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710150518.10528-1-noralf@tronnes.org
ICL changes the registers and addresses to 64 bits.
I also briefly looked at implementing an u64 version of the PCI config
read functions, but I concluded this wouldn't be trivial, so it's not
worth doing it for a single user that can't have any racing problems
while reading the register in two separate operations.
v2:
- Scrub the development (non-public) changelog (Joonas).
- Remove the i915.ko bits so this can be easily backported in order
to properly avoid stolen memory even on machines without i915.ko
(Joonas).
- CC stable for the reasons above.
Issue: VIZ-9250
CC: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: x86@kernel.org
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Fixes: 412310019a ("drm/i915/icl: Add initial Icelake definitions.")
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180504203252.28048-1-paulo.r.zanoni@intel.com
The TTM buffer-object interface provides ttm_bo_reference() and
ttm_bo_unref() for managing reference counts. Replacing them with
ttm_bo_get() and ttm_bo_put() aligns the API with conventions used
throughout the Linux kernel.
The implementation of ttm_bo_unref() clears the supplied pointer
to NULL. This leads to workarounds where the caller saves the
pointer's value before de-referencing the BO. ttm_bo_put() does
not clear the supplied pointer.
Signed-off-by: Thomas Zimmermann <contact@tzimmermann.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The sync in some panels needs to be driven by different edge of the pixel
clock compared to data. This is reflected by the
DISPLAY_FLAGS_SYNC_(POS|NEG)EDGE in videmode flags.
Add similar similar definitions for bus_flags and convert the sync drive
edge via drm_bus_flags_from_videomode().
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180618132242.8673-2-tomi.valkeinen@ti.com
Right now, the DRM panel logic returns NULL when a panel pointing to
the passed OF node is not present in the list of registered panels.
Most drivers interpret this NULL value as -EPROBE_DEFER, but we are
about to modify the semantic of of_drm_find_panel() and let the
framework return -ENODEV when the device node we're pointing to has
a status property that is not equal to "okay" or "ok".
Let's first patch the of_drm_find_panel() implementation to return
ERR_PTR(-EPROBE_DEFER) instead of NULL and patch all callers to replace
the '!panel' check by an 'IS_ERR(panel)' one.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180509130042.9435-2-boris.brezillon@bootlin.com
Remove drm_fb_cma_fbdev_init_with_funcs(), its only user tinydrm has
moved to drm_fbdev_generic_setup().
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703160354.59955-9-noralf@tronnes.org
This switches the CMA helper drivers that use its fbdev emulation over
to the generic fbdev emulation. It's the first phase of using generic
fbdev. A later phase will use DRM client callbacks for the
lastclose/hotplug/remove callbacks.
There are currently 2 fbdev init/fini functions:
- drm_fb_cma_fbdev_init/drm_fb_cma_fbdev_fini
- drm_fbdev_cma_init/drm_fbdev_cma_fini
This is because the work on generic fbdev came up during a fbdev
refactoring and thus wasn't completed. No point in completing that
refactoring when drivers will soon move to drm_fb_helper_generic_probe().
tinydrm uses drm_fb_cma_fbdev_init_with_funcs().
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703160354.59955-5-noralf@tronnes.org
This is the first step in getting generic fbdev emulation.
A drm_fb_helper_funcs.fb_probe function is added which uses the
DRM client API to get a framebuffer backed by a dumb buffer.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703160354.59955-3-noralf@tronnes.org
This the beginning of an API for in-kernel clients.
First out is a way to get a framebuffer backed by a dumb buffer.
Only GEM drivers are supported.
The original idea of using an exported dma-buf was dropped because it
also creates an anonomous file descriptor which doesn't work when the
buffer is created from a kernel thread. The easy way out is to use
drm_driver.gem_prime_vmap to get the virtual address, which requires a
GEM object. This excludes the vmwgfx driver which is the only non-GEM
driver apart from the legacy ones. A solution for vmwgfx will have to be
worked out later if it wants to support the client API which it probably
will when we have a bootsplash client.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703160354.59955-2-noralf@tronnes.org
More features for 4.19:
- Use core pcie functionality rather than duplicating our own for pcie
gens and lanes
- Scheduler function naming cleanups
- More documentation
- Reworked DC/Powerplay interfaces to improve power savings
- Initial stutter mode support for RV (power feature)
- Vega12 powerplay updates
- GFXOFF fixes
- Misc fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705221447.2807-1-alexander.deucher@amd.com
In some cases CRTCs are active but are not able to generating events, at
least not at every frame at it's expected to.
This is typically the case when the CRTC is feeding a writeback connector
that has no job queued. In this situation the CRTC is usually stopped
until a new job is queued, and this can lead to timeouts when part of
the pipeline is updated but no new jobs are queued to the active
writeback connector.
In order to solve that, we add a ->no_vblank flag to drm_crtc_state
and ask the CRTC drivers to set it to true when they know they're not
able to generate VBLANK events. The core drm_atomic_helper_fake_vblank()
helper can then be used to fake VBLANKs at commit time.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703075022.15138-6-boris.brezillon@bootlin.com
Not all writeback connector implementations might want to commit things
from the connector driver. Some, like the malidp driver, commit things
from their main commit_tail() function, and would rather not have to
implement a dummy hook for drm_connector_helper_funcs.atomic_commit().
Make this function optional and reflect this fact in the doc.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703075022.15138-4-boris.brezillon@bootlin.com
Use container_of() instead of type casting so that it keeps working
even if base is moved inside the drm_writeback_connector struct.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703075022.15138-2-boris.brezillon@bootlin.com
These functions duplicated functionality which was ultimately added
to the pci core.
All users of these functions have been ported to using the newly
exposed pci functionality. These functions are no longer used,
so drop them.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Everything in the flush code path (i.e. waiting for SW queue
to become empty) names with *_flush()
and everything in the release code path names *_fini()
This patch also effect the amdgpu and etnaviv drivers which
use those functions.
v2:
Also pplay the change to vd3.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a convenience macro for iterating connector->encoder_ids[].
Isolates the users from the implementation details.
Note that we don't seem to pass the file_priv down to drm_encoder_find()
because encoders apparently don't get leased. No idea why
drm_encoder_finc() even takes the file_priv actually.
Also use ARRAY_SIZE() when populating the array to avoid spreading
knowledge about the array size all over.
v2: Hide the drm_encoder_find() in the macro, and
rename the macro appropriately (Daniel)
v3: Fix kernel docs (Daniel)
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180628131315.14156-4-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In commits:
34a2ab5e06 ("drm: Add acquire ctx parameter to ->update_plane")
1931529448 ("drm: Add acquire ctx parameter to ->plane_disable")
a pointer to a drm_modeset_acquire_ctx structure was added as an
argument to the method prototypes. The transitional helpers are
supposed to be directly plugged in as implementations of these
methods, but doing so generates a warning. Add the missing
argument.
A number of buggy users were added for drm_plane_helper_disable()
which need to be fixed up for this change, which we do by passing
a NULL ctx argument.
Fixes: 1931529448 ("drm: Add acquire ctx parameter to ->plane_disable")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/E1fa1Zr-0005gT-VF@rmk-PC.armlinux.org.uk
on all platforms back to HSW. As well many other fix and improvements,
Including:
- Use GEM suspend when aborting initialization (Chris)
- Change i915_gem_fault to return vm_fault_t (Chris)
- Expand VMA to Non gem object entities (Chris)
- Improve logs for load failure, but quite logging on fault injection to avoid noise on CI (Chris)
- Other page directory handling fixes and improvements for gen6 (Chris)
- Other gtt clean-up removing redundancies and unused checks (Chris)
- Reorder aliasing ppgtt fini (Chris)
- Refactor of unsetting obg->mm.pages (Chris)
- Apply batch location restrictions before pinning (Chris)
- Ringbuffer fixes for context restore (Chris)
- Execlist fixes on freeing error pointer on allocation error (Chris)
- Make closing request flush mandatory (Chris)
- Move GEM sanitize from resume_early to resume (Chris)
- Improve debug dumps (Chris)
- Silent compiler for selftest (Chris)
- Other execlists changes to improve hangcheck and reset.
- Many gtt page directory fixes and improvements (Chris)
- Reorg context workarounds (Chris)
- Avoid ERR_PTR dereference on selftest (Chris)
Other GEM related work:
- Stop trying to reset GPU if reset failed (Mika)
- Add HW workaround for KBL to fix GPU reset (Mika)
- Fix context ban and hang accounting for client (Mika)
- Fixes on OA perf (Michel, Jani)
- Refactor on GuC log mechanisms (Piotr)
- Enable provoking vertex fix on Gen9 system (Kenneth)
More ICL patches for Display enabling:
- ICL - 10-bit support for HDMI (RK)
- ICL - Start adding TBT PLL (Paulo)
- ICL - DDI HDMK level selection (Manasi)
- ICL - GMBUS GPIO pin mapping fix (Mahesh)
- ICL - Adding DP_AUX_E support (James)
- ICL - Display interrupts handling (DK)
Other display fixes and improvements:
- Fix sprite destination color keying on SKL+ (Ville)
- Fixes and improvements on PCH detection, specially for non PCH systems (Jani)
- Document PCH_NOP (Lucas)
- Allow DBLSCAN user modes with eDP/LVDS/DSI (Ville)
- Opregion and ACPI cleanup and organization (Jani)
- Kill delays when activation psr (Rodrigo)
- ...and a consequent fix of the psr activation flow (DK)
- Fix HDMI infoframe setting (Imre)
- Fix Display interrupts and modes on old gens (Ville)
- Start switching to kernel unsigned int types (Jani)
- Introduction to Amber Lake and Whiskey Lake platforms (Jose)
- Audio clock fixes for HBR3 (RK)
- Standardize i915_reg.h definitions according to our doc and checkpatch (Paulo)
- Remove unused timespec_to_jiffies_timeout function (Arnd)
- Increase the scope of PSR wake fix for other VBTs out there (Vathsala)
- Improve debug msgs with prop name/id (Ville)
- Other clean up on unecessary cursor size defines (Ville)
- Enforce max hdisplay/hblank_start limits on HSW/BDW (Ville)
- Make ELD pointers constant (Jani)
- Fix for PSR VBT parse (Colin)
- Add warn about unsupported CDCLK rates (Imre)
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbKsMqAAoJEPpiX2QO6xPKI64H/0dHkMxw7/D83eODTJteDFBN
h3tdBnLFlPfeG3ZWDeSs04/dM4e9YacMN7v53j1ia4eW/F1ms0TLcegcuPqYafTW
H8fhwGB2B5gmr5hLfh5joQkxvaucQMFdg95fWRqir93VrKvVJAJEYNcaiGniejDf
qqiZue6DgAzli0zjAprfbQsnJ17TyRtnxm8lLIcFcHPoayHBzAUBZQEP6cA5qe/Y
/2ahGfkYOVVWY08DHaioDBOLUEUbxCC1AvMlv9VbtKmyPoQjTIW/1iTq0RRxDoGb
BwfDvigSiFAmpYEfVENB0qUd9e/0WhMboSnMrfzEcF2yUn4xoJx5nbmkRFkr1jI=
=mfO6
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2018-06-20' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Chris is doing many reworks that allow us to get full-ppgtt supported
on all platforms back to HSW. As well many other fix and improvements,
Including:
- Use GEM suspend when aborting initialization (Chris)
- Change i915_gem_fault to return vm_fault_t (Chris)
- Expand VMA to Non gem object entities (Chris)
- Improve logs for load failure, but quite logging on fault injection to avoid noise on CI (Chris)
- Other page directory handling fixes and improvements for gen6 (Chris)
- Other gtt clean-up removing redundancies and unused checks (Chris)
- Reorder aliasing ppgtt fini (Chris)
- Refactor of unsetting obg->mm.pages (Chris)
- Apply batch location restrictions before pinning (Chris)
- Ringbuffer fixes for context restore (Chris)
- Execlist fixes on freeing error pointer on allocation error (Chris)
- Make closing request flush mandatory (Chris)
- Move GEM sanitize from resume_early to resume (Chris)
- Improve debug dumps (Chris)
- Silent compiler for selftest (Chris)
- Other execlists changes to improve hangcheck and reset.
- Many gtt page directory fixes and improvements (Chris)
- Reorg context workarounds (Chris)
- Avoid ERR_PTR dereference on selftest (Chris)
Other GEM related work:
- Stop trying to reset GPU if reset failed (Mika)
- Add HW workaround for KBL to fix GPU reset (Mika)
- Fix context ban and hang accounting for client (Mika)
- Fixes on OA perf (Michel, Jani)
- Refactor on GuC log mechanisms (Piotr)
- Enable provoking vertex fix on Gen9 system (Kenneth)
More ICL patches for Display enabling:
- ICL - 10-bit support for HDMI (RK)
- ICL - Start adding TBT PLL (Paulo)
- ICL - DDI HDMK level selection (Manasi)
- ICL - GMBUS GPIO pin mapping fix (Mahesh)
- ICL - Adding DP_AUX_E support (James)
- ICL - Display interrupts handling (DK)
Other display fixes and improvements:
- Fix sprite destination color keying on SKL+ (Ville)
- Fixes and improvements on PCH detection, specially for non PCH systems (Jani)
- Document PCH_NOP (Lucas)
- Allow DBLSCAN user modes with eDP/LVDS/DSI (Ville)
- Opregion and ACPI cleanup and organization (Jani)
- Kill delays when activation psr (Rodrigo)
- ...and a consequent fix of the psr activation flow (DK)
- Fix HDMI infoframe setting (Imre)
- Fix Display interrupts and modes on old gens (Ville)
- Start switching to kernel unsigned int types (Jani)
- Introduction to Amber Lake and Whiskey Lake platforms (Jose)
- Audio clock fixes for HBR3 (RK)
- Standardize i915_reg.h definitions according to our doc and checkpatch (Paulo)
- Remove unused timespec_to_jiffies_timeout function (Arnd)
- Increase the scope of PSR wake fix for other VBTs out there (Vathsala)
- Improve debug msgs with prop name/id (Ville)
- Other clean up on unecessary cursor size defines (Ville)
- Enforce max hdisplay/hblank_start limits on HSW/BDW (Ville)
- Make ELD pointers constant (Jani)
- Fix for PSR VBT parse (Colin)
- Add warn about unsupported CDCLK rates (Imre)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Thu 21 Jun 2018 07:12:10 AM AEST
# gpg: using RSA key FA625F640EEB13CA
# gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>"
# gpg: aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C E2A3 FA62 5F64 0EEB 13CA
Link: https://patchwork.freedesktop.org/patch/msgid/20180625165622.GA21761@intel.com
Function is useful when drm_of_find_possible_crtcs() can't be used and
custom parsing is needed. This can happen for example when there is a
node with multiple muxes between crtc and encoder.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
[maxime: change the function to have a consistent prefix]
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-22-jernej.skrabec@siol.net
Drivers such as vc4 don't initialize mode_config.funcs until later in
initialization, but we know they're atomic since they've got the flag
set. This avoids oopsing on dereferencing funcs in the new atomic
methods sanity checks.
I moved the atomic check function down below the core flag check, to
avoid needing a prototype.
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: ba1f665f16 ("drm: Add checks for atomic_[duplicate/destroy]_state with atomic drivers")
Link: https://patchwork.freedesktop.org/patch/msgid/20180621195428.17447-1-eric@anholt.net
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
First feature request for 4.19. Highlights:
- Add initial amdgpu documentation
- Add initial GPU scheduler documention
- GPU scheduler fixes for dying processes
- Add support for the JPEG engine on VCN
- Switch CI to use powerplay by default
- EDC support for CZ
- More powerplay cleanups
- Misc DC fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180621161138.3008-1-alexander.deucher@amd.com
The meaning of the mode_config max_width/height fields has not been
entirely clear. They are used both as the max framebuffer dimensions,
and they are also used by drm_mode_getconnector() to filter out
any mode whose hdisplay/vdisplay exceed those limits.
Let's put it in writing that max_width/height only refrer to the max
framebuffer dimensions, and should those be higher than the hardware
limits for display timings the driver must validate the latter using
some other means.
We'll keep the max_width/height usage in drm_mode_getconnector()
because setcrtc treats hdisplay/vdisplay also as the primary plane
width, and having a plane bigger than the max fb size doesn't make
much sense (if we ignore scaling that is). It all works out fine
as long as the max fb dimensions are at least equal to the max
timing limits. If the opposite were true we may want to rethink
what drm_mode_getconnector() does. Maybe do the mode filtering
only for non-atomic userspace?
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180615173939.11353-1-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
We got a few conflicts in drm_atomic.c after merging the DRM writeback support,
now we need a backmerge to unlock develop development on drm-misc-next.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Due to the fact that writeback connectors behave in a special way
in DRM (they always report being disconnected) we might confuse some
userspace. Add a client capability for writeback connectors that will
filter them out for clients that don't understand the capability.
Changelog:
- only accept the capability if the client has already set the
DRM_CLIENT_CAP_ATOMIC one.
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Link: https://patchwork.freedesktop.org/patch/229038/
Add the WRITEBACK_OUT_FENCE_PTR property to writeback connectors, to
enable userspace to get a fence which will signal once the writeback is
complete. It is not allowed to request an out-fence without a
framebuffer attached to the connector.
A timeline is added to drm_writeback_connector for use by the writeback
out-fences.
In the case of a commit failure or DRM_MODE_ATOMIC_TEST_ONLY, the fence
is set to -1.
Changes from v2:
- Rebase onto Gustavo Padovan's v9 explicit sync series
- Change out_fence_ptr type to s32 __user *
- Set *out_fence_ptr to -1 in drm_atomic_connector_set_property
- Store fence in drm_writeback_job
Gustavo Padovan:
- Move out_fence_ptr out of connector_state
- Signal fence from drm_writeback_signal_completion instead of
in driver directly
Changes from v3:
- Rebase onto commit 7e9081c5aa ("drm/fence: fix memory overwrite
when setting out_fence fd") (change out_fence_ptr to s32 __user *,
for real this time.)
- Update documentation around WRITEBACK_OUT_FENCE_PTR
Signed-off-by: Brian Starkey <brian.starkey@arm.com>
[rebased and fixed conflicts]
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/229036/
Writeback connectors represent writeback engines which can write the
CRTC output to a memory framebuffer. Add a writeback connector type and
related support functions.
Drivers should initialize a writeback connector with
drm_writeback_connector_init() which takes care of setting up all the
writeback-specific details on top of the normal functionality of
drm_connector_init().
Writeback connectors have a WRITEBACK_FB_ID property, used to set the
output framebuffer, and a WRITEBACK_PIXEL_FORMATS blob used to expose the
supported writeback formats to userspace.
When a framebuffer is attached to a writeback connector with the
WRITEBACK_FB_ID property, it is used only once (for the commit in which
it was included), and userspace can never read back the value of
WRITEBACK_FB_ID. WRITEBACK_FB_ID can only be set if the connector is
attached to a CRTC.
Changes since v1:
- Added drm_writeback.c + documentation
- Added helper to initialize writeback connector in one go
- Added core checks
- Squashed into a single commit
- Dropped the client cap
- Writeback framebuffers are no longer persistent
Changes since v2:
Daniel Vetter:
- Subclass drm_connector to drm_writeback_connector
- Relax check to allow CRTC to be set without an FB
- Add some writeback_ prefixes
- Drop PIXEL_FORMATS_SIZE property, as it was unnecessary
Gustavo Padovan:
- Add drm_writeback_job to handle writeback signalling centrally
Changes since v3:
- Rebased
- Rename PIXEL_FORMATS -> WRITEBACK_PIXEL_FORMATS
Chances since v4:
- Embed a drm_encoder inside the drm_writeback_connector to
reduce the amount of boilerplate code required from the drivers
that are using it.
Changes since v5:
- Added Rob Clark's atomic_commit() vfunc to connector helper
funcs, so that writeback jobs are committed from atomic helpers
- Updated create_writeback_properties() signature to return an
error code rather than a boolean false for failure.
- Free writeback job with the connector state rather than when
doing the cleanup_work()
Changes since v7:
- fix extraneous use of out_fence that is only introduced in a
subsequent patch.
Changes since v8:
- whitespace changes pull from subsequent patch
Changes since v9:
- Revert the v6 changes that free the writeback job in the connector
state cleanup and return to doing it in the cleanup_work() function
Signed-off-by: Brian Starkey <brian.starkey@arm.com>
[rebased and fixed conflicts]
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
[rebased and added atomic_commit() vfunc for writeback jobs]
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/229037/
Neither used nor correctly implemented anywhere. Just completely remove
the interface.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/226645/
The device parameter is completely unused because it is available in the
attachment structure as well.
v2: fix kerneldoc as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/226643/
Amber Lake uses the same gen graphics as Kaby Lake, including a id
that were previously marked as reserved on Kaby Lake, but that
now is moved to AML page.
So, let's just move it to AML macro that will feed into KBL macro
just to keep it better organized to make easier future code review
but it will be handled as a KBL.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180614233720.30517-2-jose.souza@intel.com
Whiskey Lake uses the same gen graphics as Coffe Lake, including some
ids that were previously marked as reserved on Coffe Lake, but that
now are moved to WHL page.
So, let's just move them to WHL macros that will feed into CFL macro
just to keep it better organized to make easier future code review
but it will be handled as a CFL.
v2:
Fixing GT level of some ids
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180614233720.30517-1-jose.souza@intel.com
This patch add checks for atomic_[duplicate/destroy]_state of
drm_[connector/crtc/plane]_funcs for atomic drivers in the relevant
drm_*_init functions since these callback are mandatory for atomic drivers.
Update the kerneldoc comments for those callbacks.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180525012555.GA8448@haneen-vb
Dying process might be blocked from receiving any more signals
so avoid using it.
Also retire enity->fini_status and just check the SW queue,
if it's not empty do the fallback cleanup.
Also handle entity->last_scheduled == NULL use case which
happens when HW ring is already hangged whem a new entity
tried to enqeue jobs.
v2:
Return the remaining timeout and use that as parameter for the next call.
This way when we need to cleanup multiple queues we don't wait for the
entire TO period for each queue but rather in total.
Styling comments.
Rebase.
v3:
Update types from unsigned to long.
Work with jiffies instead of ms.
Return 0 when TO expires.
Rebase.
v4:
Remove unnecessary timeout calculation.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
convert existing raw comments into kernel-doc format as well
as add new documentation
v2: reword the overview
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Stop playing around with plane->crtc/fb/old_fb with atomic
drivers. Make life a lot simpler when we don't have to do the
magic old_fb vs. fb dance around plane updates. That way we
can't risk plane->fb getting out of sync with plane->state->fb
and we're less likely to leak any refcounts as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180525185045.29689-14-ville.syrjala@linux.intel.com
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
-----BEGIN PGP SIGNATURE-----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=twst
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2018-06-06-1' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"This starts to support NVIDIA volta hardware with nouveau, and adds
amdgpu support for the GPU in the Kabylake-G (the intel + radeon
single package chip), along with some initial Intel icelake enabling.
Summary:
New Drivers:
- v3d - driver for broadcom V3D V3.x+ hardware
- xen-front - XEN PV display frontend
core:
- handle zpos normalization in the core
- stop looking at legacy pointers in atomic paths
- improved scheduler documentation
- improved aspect ratio validation
- aspect ratio support for 64:27 and 256:135
- drop unused control node code.
i915:
- Icelake (ICL) enabling
- GuC/HuC refactoring
- PSR/PSR2 enabling and fixes
- DPLL management refactoring
- DP MST fixes
- NV12 enabling
- HDCP improvements
- GEM/Execlist/reset improvements
- GVT improvements
- stolen memory first 4k fix
amdgpu:
- Vega 20 support
- VEGAM support (Kabylake-G)
- preOS scanout buffer reservation
- power management gfxoff support for raven
- SR-IOV fixes
- Vega10 power profiles and clock voltage control
- scatter/gather display support on CZ/ST
amdkfd:
- GFX9 dGPU support
- userptr memory mapping
nouveau:
- major refactoring for Volta GV100 support
tda998x:
- HDMI i2c CEC support
etnaviv:
- removed unused logging code
- license text cleanups
- MMU handling improvements
- timeout fence fix for 50 days uptime
tegra:
- IOMMU support in gr2d/gr3d drivers
- zpos support
vc4:
- syncobj support
- CTM, plane alpha and async cursor support
analogix_dp:
- HPD and aux chan fixes
sun4i:
- MIPI DSI support
tilcdc:
- clock divider fixes for OMAP-l138 LCDK board
rcar-du:
- R8A77965 support
- dma-buf fences fixes
- hardware indexed crtc/du group handling
- generic zplane property support
atmel-hclcdc:
- generic zplane property support
mediatek:
- use generic video mode function
exynos:
- S5PV210 FIMD variant support
- IPP v2 framework
- more HW overlays support"
* tag 'drm-next-2018-06-06-1' of git://anongit.freedesktop.org/drm/drm: (1286 commits)
drm/amdgpu: fix 32-bit build warning
drm/exynos: fimc: signedness bug in fimc_setup_clocks()
drm/exynos: scaler: fix static checker warning
drm/amdgpu: Use dev_info() to report amdkfd is not supported for this ASIC
drm/amd/display: Remove use of division operator for long longs
drm/amdgpu: Update GFX info structure to match what vega20 used
drm/amdgpu/pp: remove duplicate assignment
drm/sched: add rcu_barrier after entity fini
drm/amdgpu: move VM BOs on LRU again
drm/amdgpu: consistenly use VM moved flag
drm/amdgpu: kmap PDs/PTs in amdgpu_vm_update_directories
drm/amdgpu: further optimize amdgpu_vm_handle_moved
drm/amdgpu: cleanup amdgpu_vm_validate_pt_bos v2
drm/amdgpu: rework VM state machine lock handling v2
drm/amdgpu: Add runtime VCN PG support
drm/amdgpu: Enable VCN static PG by default on RV
drm/amdgpu: Add VCN static PG support on RV
drm/amdgpu: Enable VCN CG by default on RV
drm/amdgpu: Add static CG control for VCN on RV
drm/exynos: Fix default value for zpos plane property
...
For parameterized modifiers (Broadcom's SAND and UIF), we need to
allow the parameter fields to be filled in, while exposing only the
variant of the modifier with the parameter unfilled in the internal
arrays and the format blob.
Signed-off-by: Eric Anholt <eric@anholt.net>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180316220435.31416-1-eric@anholt.net
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
The dw_hdmi_setup_rx_sense exported function should not use struct device
to recover the dw-hdmi context using drvdata, but take struct dw_hdmi
directly like other exported functions.
This caused a regression using Meson DRM on S905X since v4.17-rc1 :
Internal error: Oops: 96000007 [#1] PREEMPT SMP
[...]
CPU: 0 PID: 124 Comm: irq/32-dw_hdmi_ Not tainted 4.17.0-rc7 #2
Hardware name: Libre Technology CC (DT)
[...]
pc : osq_lock+0x54/0x188
lr : __mutex_lock.isra.0+0x74/0x530
[...]
Process irq/32-dw_hdmi_ (pid: 124, stack limit = 0x00000000adf418cb)
Call trace:
osq_lock+0x54/0x188
__mutex_lock_slowpath+0x10/0x18
mutex_lock+0x30/0x38
__dw_hdmi_setup_rx_sense+0x28/0x98
dw_hdmi_setup_rx_sense+0x10/0x18
dw_hdmi_top_thread_irq+0x2c/0x50
irq_thread_fn+0x28/0x68
irq_thread+0x10c/0x1a0
kthread+0x128/0x130
ret_from_fork+0x10/0x18
Code: 34000964 d00050a2 51000484 9135c042 (f864d844)
---[ end trace 945641e1fbbc07da ]---
note: irq/32-dw_hdmi_[124] exited with preempt_count 1
genirq: exiting task "irq/32-dw_hdmi_" (124) is an active IRQ thread (irq 32)
Fixes: eea034af90 ("drm/bridge/synopsys: dw-hdmi: don't clobber drvdata")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1527673438-20643-1-git-send-email-narmstrong@baylibre.com
Searching for an available hole by address is slow, as there no
guarantee that a hole will be available and so we must walk over all
nodes in the rbtree before we determine the search was futile. In many
cases, the caller doesn't strictly care for the highest available hole
and was just opportunistically laying out the address space in a
preferred order. In such cases, the caller can accept any address and
would rather do so then do a slow walk.
To be able to mix search strategies, the caller wants to tell the drm_mm
how long to spend on the search. Without a good guide for what should be
the best split, start with a request to try once at most. That is return
the top-most (or lowest) hole if it fulfils the alignment and size
requirements.
v2: Documentation, by why of example (selftests) and kerneldoc.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180521082131.13744-2-chris@chris-wilson.co.uk
As we keep an rbtree of available holes sorted by their size, we can
very easily determine if there is any hole large enough that might
satisfy the allocation request. This helps when dealing with a highly
fragmented address space and a request for a search by address.
To cache the largest size, we convert into the cached rbtree variant
which tracks the leftmost node for us. However, currently we sorted into
ascending size order so the leftmost node is the smallest, and so to
make it the largest hole we need to invert our sorting.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180521082131.13744-1-chris@chris-wilson.co.uk
This spinlock is superfluous, any call to drm_sched_entity_push_job
should already be under a lock together with matching drm_sched_job_init
to match the order of insertion into queue with job's fence seqence
number.
v2:
Improve patch description.
Add functions documentation describing the locking considerations
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add device_link from panel device (supplier) to DRM device (consumer)
when drm_panel_attach() is called. This patch should protect the master
DRM driver if an attached panel driver unbinds while it is in use. The
device_link should make sure the DRM device is unbound before the panel
driver becomes unavailable.
The device_link is removed when drm_panel_detach() is called. The
drm_panel_detach() should be called by the consumer DRM driver, not the
panel driver, otherwise both drivers are racing to delete the same link.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b53584fd988d045c13de22d81825395b0ae0aad7.1524727888.git.jsarha@ti.com
Added content_type property to drm_connector_state
in order to properly handle external HDMI TV content-type setting.
v2:
* Moved helper function which attaches content type property
to the drm core, as was suggested.
Removed redundant connector state initialization.
v3:
* Removed caps in drm_content_type_enum_list.
After some discussion it turned out that HDMI Spec 1.4
was wrongly assuming that IT Content(itc) bit doesn't affect
Content type states, however itc bit needs to be manupulated
as well. In order to not expose additional property for itc,
for sake of simplicity it was decided to bind those together
in same "content type" property.
v4:
* Added it_content checking in intel_digital_connector_atomic_check.
Fixed documentation for new content type enum.
v5:
* Moved patch revision's description to commit messages.
v6:
* Minor naming fix for the content type enumeration string.
v7:
* Fix parameter name for documentation and parameter alignment
in order not to get warning. Added Content Type description to
new HDMI connector properties section.
v8:
* Thrown away unneeded numbers from HDMI content-type property
description. Switch to strings desription instead of plain
definitions.
v9:
* Moved away hdmi specific content-type enum from
drm_connector_state. Content type property should probably not
be bound to any specific connector interface in
drm_connector_state.
Same probably should be done to hdmi_picture_aspect_ration enum
which is also contained in drm_connector_state. Added special
helper function to get derive hdmi specific relevant infoframe
fields.
v10:
* Added usage description to HDMI properties kernel doc.
v11:
* Created centralized function for filling HDMI AVI infoframe, based
on correspondent DRM property value.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180515135928.31092-2-stanislav.lisovskiy@intel.com
[vsyrjala: clean up checkpatch multiple blank lines warnings]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Add vega20 to amd_asic_type enum and amdgpu_asic_name[].
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Main changes for 4.18. I'd like to do a separate pull for vega20 later
this week or next. Highlights:
- Reserve pre-OS scanout buffer during init for seemless transition from
console to driver
- VEGAM support
- Improved GPU scheduler documentation
- Initial gfxoff support for raven
- SR-IOV fixes
- Default to non-AGP on PowerPC for radeon
- Fine grained clock voltage control for vega10
- Power profiles for vega10
- Further clean up of powerplay/driver interface
- Underlay fixes
- Display link bw updates
- Gamma fixes
- Scatter/Gather display support on CZ/ST
- Misc bug fixes and clean ups
[airlied: fixup v3d vs scheduler API change]
Link: https://patchwork.freedesktop.org/patch/msgid/20180515185450.1113-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
this patch also effect the amdgpu and etnaviv drivers which
use the function drm_sched_entity_init
Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
issue:
there are VMC page fault occurred if force APP kill during
3dmark test, the cause is in entity_fini we manually signal
all those jobs in entity's queue which confuse the sync/dep
mechanism:
1)page fault occurred in sdma's clear job which operate on
shadow buffer, and shadow buffer's Gart table is cleaned by
ttm_bo_release since the fence in its reservation was fake signaled
by entity_fini() under the case of SIGKILL received.
2)page fault occurred in gfx' job because during the lifetime
of gfx job we manually fake signal all jobs from its entity
in entity_fini(), thus the unmapping/clear PTE job depend on those
result fence is satisfied and sdma start clearing the PTE and lead
to GFX page fault.
fix:
1)should at least wait all jobs already scheduled complete in entity_fini()
if SIGKILL is the case.
2)if a fence signaled and try to clear some entity's dependency, should
set this entity guilty to prevent its job really run since the dependency
is fake signaled.
v2:
splitting drm_sched_entity_fini() into two functions:
1)The first one is does the waiting, removes the entity from the
runqueue and returns an error when the process was killed.
2)The second one then goes over the entity, install it as
completion signal for the remaining jobs and signals all jobs
with an error code.
v3:
1)Replace the fini1 and fini2 with better name
2)Call the first part before the VM teardown in
amdgpu_driver_postclose_kms() and the second part
after the VM teardown
3)Keep the original function drm_sched_entity_fini to
refine the code.
v4:
1)Rename entity->finished to entity->last_scheduled;
2)Rename drm_sched_entity_fini_job_cb() to
drm_sched_entity_kill_jobs_cb();
3)Pass NULL to drm_sched_entity_fini_job_cb() if -ENOENT;
4)Replace the type of entity->fini_status with "int";
5)Remove the check about entity->finished.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm_minor_alloc() does multiplication on this enum, so the removal
ended up moving render nodes down from 128 base to 64. This caused
Mesa's surfaceless backend to be unable to open the render nodes,
since it was still looking up at 128.
v2: Add a comment warning the next person.
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: 0d49f303e8 ("drm: remove all control node code")
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180509001425.12574-1-eric@anholt.net
We parse the EDID and add all the modes in the connector's modelist.
This adds CEA modes with aspect ratio information too, regardless of
whether user space requested this information or not.
This patch:
-prunes the modes with aspect-ratio information, from the
drm_mode_get_connector modelist supplied to the user, if the
user-space has not set the aspect ratio DRM client cap. However if
such a mode is unique in the list, it is kept in the list, with
aspect-ratio flags reset.
-prepares a list of exposed modes, which is used to find unique modes
if aspect-ratio is not allowed.
-adds a new list_head 'exposed_head' in drm_mode_display, to traverse
the list of exposed modes.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Jose Abreu <jose.abreu@synopsys.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
V3: As suggested by Ville, modified the mechanism of pruning of modes
with aspect-ratio, if the aspect-ratio is not supported. Instead
of straight away pruning such a mode, the mode is retained with
aspect ratio bits set to zero, provided it is unique.
V4: rebase
V5: Addressed review comments from Ville:
-used a pointer to store last valid mode.
-avoided, modifying of picture_aspect_ratio in kernel mode,
instead only flags bits of user mode are reset (if aspect-ratio
is not supported).
V6: As suggested by Ville, corrected the mode pruning logic and
elaborated the mode pruning logic and the assumptions taken.
V7: rebase
V8: rebase
V9: rebase
V10: rebase
V11: Fixed the issue caused in kms_3d test, and enhanced the pruning
logic to correctly identify and prune modes with aspect-ratio,
if aspect-ratio cap is not set.
V12: As suggested by Ville, added another list_head in
drm_mode_display to traverse the list of exposed modes and
avoided duplication of modes.
V13: Minor modifications, as suggested by Ville.
v14: As suggested by Daniel Vetter and Ville Syrjala, corrected the
pruning logic to avoid any dependency in the order of mode with
aspect-ratio.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525777785-9740-9-git-send-email-ankit.k.nautiyal@intel.com
To enable aspect-ratio support in DRM, blindly exposing the aspect
ratio information along with mode, can break things in existing
non-atomic user-spaces which have no intention or support to use this
aspect ratio information.
To avoid this, a new drm client cap is required to enable a non-atomic
user-space to advertise if it supports modes with aspect-ratio. Based
on this cap value, the kernel will take a call on exposing the aspect
ratio info in modes or not.
This patch adds the client cap for aspect-ratio.
Since no atomic-userspaces blow up on receiving aspect-ratio
information, the client cap for aspect-ratio is always enabled
for atomic clients.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
V3: rebase
V4: As suggested by Marteen Lankhorst modified the commit message
explaining the need to use the DRM cap for aspect-ratio. Also,
tweaked the comment lines in the code for better understanding and
clarity, as recommended by Shashank Sharma.
V5: rebase
V6: rebase
V7: rebase
V8: rebase
V9: rebase
V10: rebase
V11: rebase
V12: As suggested by Daniel Vetter and Ville Syrjala,
always enable aspect-ratio client cap for atomic userspaces,
if no atomic userspace breaks on aspect-ratio bits.
V13: rebase
V14: rebase
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525777785-9740-7-git-send-email-ankit.k.nautiyal@intel.com
Make mode matching less confusing by allowing the caller to specify
which parts of the modes should match via some flags.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1525777785-9740-2-git-send-email-ankit.k.nautiyal@intel.com
DP_TRAINING_AUX_RD_INTERVAL with DP 1.3 spec changed bit scheeme from 8
bits to 7 in DPCD 0x000e. The 8th bit is used to identify extended
receiver capabilities. For panels that use this new feature wait interval
would be increased by 512 ms, when spec is max 16 ms. This behavior is
described in table 2-158 of DP 1.4 spec address 0000eh.
With the introduction of DP 1.4 spec main link clock recovery was
standardized to 100 us regardless of TRAINING_AUX_RD_INTERVAL value.
To avoid breaking panels that are not spec compiant we now warn on
invalid values.
V2: commit title/message, masking all 7 bits, warn on out of spec values.
V3: commit message, make link train clock recovery follow DP 1.4 spec.
V4: style changes
V5: typo
V6: print statement revisions, DP_REV to DPCD_REV, comment correction
V7: typo
V8: Style
V9: Strip out DPCD_REV_XX into seperate patch
v10: DPCD_REV_XX to DP_DPCD_REV_XX
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180504221800.17830-2-matthew.s.atwood@intel.com
As more differentation occurs between DP spec. Its useful to have these
as macros in a drm_dp_helper.
v2: DPCD_REV_XX to DP_DPCD_REV_XX
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180504221800.17830-1-matthew.s.atwood@intel.com
Instead of relying on a scale which may increase rounding errors,
clip src by doing: src * (dst - clip) / dst and rounding the result
away from 1, so the new coordinates get closer to 1. We won't need
to fix up with a magic macro afterwards, because our scaling factor
will never go to the other side of 1.
Changes since v1:
- Adjust dst immediately, else drm_rect_width/height on dst gives bogus
results.
Change since v2:
- Get rid of macros and use 64-bits math.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[mlankhorst: Add Villes comment, and rename newsrc to tmp. (Ville)]
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180503112217.37292-3-maarten.lankhorst@linux.intel.com
With the ioctl and driver prep done, we can remove everything else.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Link: https://patchwork.freedesktop.org/patch/msgid/20180420065159.4531-4-daniel.vetter@ffwll.ch
UAPI Changes:
- Add support for a generic plane alpha property to sun4i, rcar-du and atmel-hclcdc. (Maxime)
Core Changes:
- Stop looking at legacy plane->fb and crtc members in atomic drivers. (Ville)
- mode_valid return type fixes. (Luc)
- Handle zpos normalization in the core. (Peter)
Driver Changes:
- Implement CTM, plane alpha and generic async cursor support in vc4. (Stefan)
- Various fixes for HPD and aux chan in drm_bridge/analogix_dp. (Lin, Zain, Douglas)
- Add support for MIPI DSI to sun4i. (Maxime)
-----BEGIN PGP SIGNATURE-----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=9LYY
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2018-04-26' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v4.18:
UAPI Changes:
- Add support for a generic plane alpha property to sun4i, rcar-du and atmel-hclcdc. (Maxime)
Core Changes:
- Stop looking at legacy plane->fb and crtc members in atomic drivers. (Ville)
- mode_valid return type fixes. (Luc)
- Handle zpos normalization in the core. (Peter)
Driver Changes:
- Implement CTM, plane alpha and generic async cursor support in vc4. (Stefan)
- Various fixes for HPD and aux chan in drm_bridge/analogix_dp. (Lin, Zain, Douglas)
- Add support for MIPI DSI to sun4i. (Maxime)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Thu 26 Apr 2018 08:21:01 PM AEST
# gpg: using RSA key FE558C72A67013C3
# gpg: Can't check signature: public key not found
Link: https://patchwork.freedesktop.org/patch/msgid/b33da7eb-efc9-ae6f-6f69-b7acd6df6797@mblankhorst.nl
No functional changes in this patch.
The SDP Header is a generic header for secondary data packets for
both eDP and DP so call it dp_sdp_header. This header gets used for
different SDP types already defined.
Also header bytes 2 and 3 are secondary data packet specific header bytes.
So change the comment to indicate the same.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1524770868-16869-1-git-send-email-manasi.d.navare@intel.com
Note that a pile of drivers don't seem to take implicit fencing into
account, or at least don't call drm_atoimc_set_fence_for_plane().
Cc'ing relevant people, or at least some. Some drivers also look like
they don't disable implicit fencing (e.g. amdgpu) because the explicit
fences and implicit fences are handled by entirely independent code
paths.
I also wonder whether we shouldn't just make the recommended helpers
the default ones, since a lot of drivers don't bother to handle the
implicit fences at all it seems. The helpers won't blow up even for
non-GEM drivers or GEM drivers which don't fill out the gem bo
pointers in struct drm_framebuffer.
v2: Comments from Eric.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-7-daniel.vetter@ffwll.ch
There's nothing tinydrm specific to this, and there's a few more
copies of the same in various other drivers.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: David Lechner <david@lechnology.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: David Lechner <david@lechnology.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-3-daniel.vetter@ffwll.ch
Some of the platform-specific stuff in rockchip_dp_poweron() needs to
happen before the generic code. Some needs to happen after. Let's
split the callback in two.
Specifically we can't start doing PSR work until _after_ the whole
controller is up, so don't set the enable until the end.
Cc: Kristian H. Kristensen <hoegsberg@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
[seanpaul added exynos change]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-23-enric.balletbo@collabora.com
In both HDMI and DP, device count is represented by 6:0 bits of a
register(BInfo/Bstatus)
So macro for bitmasking the device_count is fixed(0x3F->0x7F).
v3:
Retained the Rb-ed.
v4:
%s/drm\/i915/drm [rodrigo]
v5:
Added "Fixes:" and HDCP keyword in subject [Rodrigo, Sean Paul]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Fixes: 495eb7f877 drm: Add some HDCP related #defines
cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1522929802-22850-1-git-send-email-ramalingam.c@intel.com
These comments answer all the questions I had for myself when
implementing a driver using the GPU scheduler.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move it with the scheduler code. This is mostly a straight forward
rename with no code change except for updating the TRACE_INCLUDE_PATH
Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit 'aee3bac0a3a8 ("drm/i915/psr: Tie PSR2 support to Y
coordinate requirement")' got merged to drm-intel-next-queued
but the variable was defined commit 'c5fe47327b06 ("drm: Add PSR
version 3 macro") who was merged through drm-misc.
So backmerging to get drm-intel-next-queued compiling back again.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Use srcu to protect drm_device.unplugged in a race free manner.
Drivers can use drm_dev_enter()/drm_dev_exit() to protect and mark
sections preventing access to device resources that are not available
after the device is gone.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Tested-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1522222715-11814-1-git-send-email-andr2000@gmail.com
mipi_dbi_enable_flush() wants to call the fb->dirty() hook from the
bowels of the .atomic_enable() hook. That prevents us from taking the
plane mutex in fb->dirty() unless we also plumb down the acquire
context.
Instead it seems simpler to split the fb->dirty() into a tinydrm
specific lower level hook that can be called from
mipi_dbi_enable_flush() and from a generic higher level
tinydrm_fb_dirty() helper. As we don't have a tinydrm specific
vfuncs table we'll just stick it into tinydrm_device directly
for now.
v2: Deal with the fb->dirty() in tinydrm_display_pipe_update() as well (Noralf)
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: David Lechner <david@lechnology.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180323153509.15287-1-ville.syrjala@linux.intel.com
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Instead of drivers duplicating the drm_atomic_helper_check() code to be
able to normalize the zpos they can use the normalize_zpos flag to let the
drm core to do it.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180321102029.15248-2-peter.ujfalusi@ti.com
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJauCZfAAoJEHm+PkMAQRiGWGUH/2rhdQDkoJpYWnjaQkolECG8
MxpGE7nmIIHxQcbSDdHTGJ8IhVm6Z5wZ7ym/PwCDTT043Y1y341sJrIwL2/nTG6d
HVidk8hFvgN6QzlzVAHT3ZZMII/V9Zt+VV5SUYLGnPAVuJNHo/6uzWlTU5g+NTFo
IquFDdQUaGBlkKqby+NoAFnkV1UAIkW0g22cfvPnlO5GMer0gusGyVNvVp7TNj3C
sqj4Hvt3RMDLMNe9RZ2pFTiOD096n8FWpYftZneUTxFImhRV3Jg5MaaYZm9SI3HW
tXrv/LChT/F1mi5Pkx6tkT5Hr8WvcrwDMJ4It1kom10RqWAgjxIR3CMm448ileY=
=YKUG
-----END PGP SIGNATURE-----
Backmerge tag 'v4.16-rc7' into drm-next
Linux 4.16-rc7
This was requested by Daniel, and things were getting
a bit hard to reconcile, most of the conflicts were
trivial though.
Last pull for 4.17. Highlights:
- Vega12 support
- A few more bug fixes and cleanups for powerplay
* 'drm-next-4.17' of git://people.freedesktop.org/~agd5f/linux: (77 commits)
drm/amd/pp: clean header file hwmgr.h
drm/amd/pp: use mlck_table.count for array loop index limit
drm/amdgpu: Add an ATPX quirk for hybrid laptop
drm/amdgpu: fix spelling mistake: "asssert" -> "assert"
drm/amd/pp: Add new asic support in pp_psm.c
drm/amd/pp: Clean up powerplay code on Vega12
drm/amd/pp: Add smu irq handlers for legacy asics
drm/amd/pp: Fix set wrong temperature range on smu7
drm/amdgpu: Don't change preferred domian when fallback GTT v5
drm/amdgpu: Fix NULL ptr on driver unload due to init failure.
drm/amdgpu: fix "mitigate workaround for i915"
drm/amd/pp: Add smu irq handlers in sw_init instand of hw_init
drm/amd/pp: Refine register_thermal_interrupt function
drm/amdgpu: Remove wrapper layer of cgs irq handling
drm/amd/powerplay: Return per DPM level clock
drm/amd/powerplay: Remove the SOC floor voltage setting
drm/amdgpu: no job timeout setting on compute queues
drm/amdgpu: add vega12 pci ids (v2)
drm/amd/powerplay: add the hw manager for vega12 (v4)
drm/amd/powerplay: add the smu manager for vega12 (v4)
...
A relative large set of various improvements for vmwgfx. Some of them
have been around for a while, some are relatively new, but functionality
should have been tested in our standalone repo.
* 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: Bump version patchlevel and date
drm/vmwgfx: use monotonic event timestamps
drm/vmwgfx: Unpin the screen object backup buffer when not used
drm/vmwgfx: Stricter count of legacy surface device resources
drm/vmwgfx: Use kasprintf
drm/vmwgfx: Get rid of the device-private suspended member
drm/vmwgfx: Improve on hibernation
drm/vmwgfx: Avoid pinning fbdev framebuffers
drm/vmwgfx: Fix multiple command buffer context use
drm/vmwgfx: Use the cpu blit utility for framebuffer to screen target blits
drm/vmwgfx: Add a cpu blit utility that can be used for page-backed bos
drm/ttm: Export the ttm_k[un]map_atomic_prot API.
drm/ttm: Clean up kmap_atomic_prot selection code
drm/vmwgfx: Cursor update fixes
drm/vmwgfx: Send the correct nonblock option for atomic_commit
drm/vmwgfx: Move the stdu vblank event to atomic function
drm/vmwgfx: Move screen object page flip to atomic function
drm/vmwgfx: Remove drm_crtc_arm_vblank_event from atomic flush
drm/vmwgfx: Move surface copy cmd to atomic function
drm/vmwgfx: Avoid iterating over display unit if crtc is available
This patch remove the compatibility aliases
drm_property_{reference/unreference}_blob of
drm_property_blob_{get/put} since all callers have been converted to the
prefered _{get/put}.
Remove the helpers from the semantic patch drm-get-put-cocci.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180320133749.GA11695@haneen-VirtualBox
It will be used by vmwgfx cpu blit.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Add vega12 to amd_asic_type enum and amdgpu_asic_name[].
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
These macros are similar to the DRM_<LEVEL> with the addition
of a struct device * to the arguments.
Convert the single drm_dev_printk function into 2 separate functions.
drm_dev_printk with a KERN_<LEVEL> * for generic use and drm_dev_dbg
for conditional masked use.
Remove the __func__ argument and use __builtin_return_address(0) to be
similar to the DRM_<LEVEL> macros uses.
Convert the DRM_DEV_<LEVEL> macros to remove now unnecessary arguments
and use a consistent style.
These macros are rarely used in the generic gpu/drm code so the code
size does not change much for a defconfig, but when more drivers are
enabled, there is ~4k savings.
Many of these macros have no existing use at all.
$ size -t drivers/gpu/drm/built-in.a | tail -1
1877530 44651 995 1923176 1d5868 (TOTALS)
$ size -t drivers/gpu/drm/built-in.a | tail -1
1877527 44651 995 1923173 1d5865 (TOTALS)
$ size -t drivers/gpu/drm/built-in.a | tail -1
17166750 2689238 108352 19964340 130a1b4 (TOTALS)
$ size -t drivers/gpu/drm/built-in.a | tail -1
17168888 2691734 108352 19968974 130b3ce (TOTALS)
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/e5c164946e15375ac71b69b75f296efdf0b76e6d.1521233717.git.joe@perches.com
This patch remove the compatibility aliases
drm_mode_object_{reference/unreference} of drm_mode_object_{get/put}
since all callers have been converted to the prefered _{get/put}.
Remove the helpers from the semantic patch drm-get-put-cocci.
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180319055820.GA17502@haneen-VirtualBox
Using a flexible array for the blob data was a mistake by me. It
forces all users of the blob data to cast blob->data to something
else. void* is clearly superior so let's go back to the original
scheme.
Not a clean revert as the code has moved.
This reverts commit d63f5e6bf6.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180223192506.29992-1-ville.syrjala@linux.intel.com
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm_printk is used for both DRM_ERROR and DRM_DEBUG with unnecessary
arguments that can be removed by creating separate functins.
Create specific functions for these calls to reduce x86/64 defconfig
size by ~20k.
Modify the existing macros to use the specific calls.
new:
$ size -t drivers/gpu/drm/built-in.a | tail -1
1876562 44542 995 1922099 1d5433 (TOTALS)
old:
$ size -t drivers/gpu/drm/built-in.a | tail -1
1897565 44542 995 1943102 1da63e (TOTALS)
Miscellanea:
o intel_display requires a change to use the specific calls.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/016b5cb84cede20fd0f91ed6965421d99fd5f2ce.1520978414.git.joe@perches.com
Instead of calculating the size in bytes just to recalculate the number
of pages from it pass the BO directly to the function.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allows us to gut a BO of it's backing store when the driver says that it
isn't needed any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows drivers to only allocate dma addresses, but not a page
array.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Let's stop mangling everything in a single header and create one header
per object instead.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a race between AUX CH bring-up and enabling bridge which will
cause link training to fail. To avoid hitting it, don't change psr state
while enabling the bridge.
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
[seanpaul fixed up the commit message a bit and renamed *_supported to *_enabled]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180309222327.18689-4-enric.balletbo@collabora.com
UAPI Changes:
- Query uAPI interface (used for GPU topology information currently)
* Mesa: https://patchwork.freedesktop.org/series/38795/
Driver Changes:
- Increase PSR2 size for CNL (DK)
- Avoid retraining LSPCON link unnecessarily (Ville)
- Decrease request signaling latency (Chris)
- GuC error capture fix (Daniele)
* tag 'drm-intel-next-2018-03-08' of git://anongit.freedesktop.org/drm/drm-intel: (127 commits)
drm/i915: Update DRIVER_DATE to 20180308
drm/i915: add schedule out notification of preempted but completed request
drm/i915: expose rcs topology through query uAPI
drm/i915: add query uAPI
drm/i915: add rcs topology to error state
drm/i915/debugfs: add rcs topology entry
drm/i915/debugfs: reuse max slice/subslices already stored in sseu
drm/i915: store all subslice masks
drm/i915/guc: work around gcc-4.4.4 union initializer issue
drm/i915/cnl: Add Wa_2201832410
drm/i915/icl: Gen11 forcewake support
drm/i915/icl: Add Indirect Context Offset for Gen11
drm/i915/icl: Enhanced execution list support
drm/i915/icl: new context descriptor support
drm/i915/icl: Correctly initialize the Gen11 engines
drm/i915: Assert that the request is indeed complete when signaled from irq
drm/i915: Handle changing enable_fbc parameter at runtime better.
drm/i915: Track whether the DP link is trained or not
drm/i915: Nuke intel_dp->channel_eq_status
drm/i915: Move SST DP link retraining into the ->post_hotplug() hook
...
More stuff for 4.17. Highlights:
- More fixes for "wattman" like functionality (fine grained clk/voltage control)
- Add more power profile infrastucture (context based dpm)
- SR-IOV fixes
- Add iomem debugging interface for use with umr
- Powerplay and cgs cleanups
- DC fixes and cleanups
- ttm improvements
- Misc cleanups all over
* 'drm-next-4.17' of git://people.freedesktop.org/~agd5f/linux: (143 commits)
drm/amdgpu:Always save uvd vcpu_bo in VM Mode
drm/amdgpu:Correct max uvd handles
drm/amdgpu: replace iova debugfs file with iomem (v3)
drm/amd/display: validate plane format on primary plane
drm/amdgpu: Clean sdma wptr register when only enable wptr polling
drm/amd/amdgpu: re-add missing GC 9.1 and SDMA0 4.1 sh_mask header files
drm/amdgpu: give warning before sleep in kiq_r/wreg
drm/amdgpu: further mitigate workaround for i915
drm/amdgpu: drop gtt->adev
drm/amdgpu: add amdgpu_evict_gtt debugfs entry
drm/amd/pp: Add #ifdef checks for CONFIG_ACPI
drm/amd/pp: fix "Delete the wrapper layer of smu_allocate/free_memory"
drm/amd/pp: Drop wrapper functions for upper/lower_32_bits
drm/amdgpu: Delete cgs wrapper functions for gpu memory manager
drm/amd/pp: Delete the wrapper layer of smu_allocate/free_memory
drm/amd/pp: Remove cgs wrapper function for temperature update
Revert "drm/amd/pp: Add a pp feature mask bit for AutoWattman feature"
drm/amd/pp: Add auto power profilng switch based on workloads (v2)
drm/amd/pp: Revert gfx/compute profile switch sysfs
drm/amd/pp: Fix sclk in highest two levels when compute on smu7
...
This fixes up the .mode_valid() vtable entry documentation
by copyediting the documentation from the .mode_valid()
documentation in the drm_modeset_helper_vtables.h file.
Fixes: 40275dc4ed ("drm: simple_kms_helper: Add mode_valid() callback support")
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180227101109.6088-1-linus.walleij@linaro.org
Add reverse iterator for_each_oldnew_plane_in_state_reverse to
compliment the for_each_oldnew_plane_in_state way or reading plane
states.
The plane states are required to be read in reverse order for
amd drivers, cause the z order convention followed in linux is
opposite to how the planes are supposed to be presented to DC
engine, which is in common to both windows and linux.
V2: fix compile time errors due to -Werror flag.
Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1520392203-6885-1-git-send-email-shirish.s@amd.com
If there is another bridge after analogix_dp, then the connector object
should not be created. This fixes following timeouts on Exynos5420-based
Chromebook2 Peach-PIT board during boot:
exynos-dp 145b0000.dp-controller: AUX CH cmd reply timeout!
exynos-dp 145b0000.dp-controller: AUX CH enable timeout!
exynos-dp 145b0000.dp-controller: AUX CH enable timeout!
exynos-dp 145b0000.dp-controller: AUX CH enable timeout!
exynos-dp 145b0000.dp-controller: AUX CH enable timeout!
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180305085741.18896-4-m.szyprowski@samsung.com
Add a standard optional properties to support different non RGB color
encodings in DRM planes. COLOR_ENCODING select the supported non RGB
color encoding, for instance ITU-R BT.709 YCbCr. COLOR_RANGE selects
the value ranges within the selected color encoding. The properties
are stored to drm_plane object to allow different set of supported
encoding for different planes on the device.
v2: Add/fix kerneldocs, verify bitmasks (danvet)
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Russell King - ARM Linux <linux@armlinux.org.uk>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
[vsyrjala v2: Add/fix kerneldocs, verify bitmasks]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180219202823.10508-1-ville.syrjala@linux.intel.com
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The driver that instantiates the bridge should own the drvdata, as all
driver model callbacks (probe, remove, shutdown, PM ops, etc.) are also
owned by its driver struct. Moreover, storing two different pointer
types in driver data depending on driver initialization status is barely
a good practice and in fact has led to many bugs in this driver.
Let's clean up this mess and change Analogix entry points to simply
accept some opaque struct pointer, adjusting their users at the same
time to avoid breaking the compilation.
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Acked-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180110162348.22765-2-thierry.escande@collabora.com
To pull in the HDCP changes, especially wait_for changes to drm/i915
that Chris wants to build on top of.
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Driver Changes:
- Lift alpha_support protection from Cannonlake (Rodrigo)
* Meaning the driver should mostly work for the hardware we had
at our disposal when testing
* Used to be preliminary_hw_support
- Add missing Cannonlake PCI device ID of 0x5A4C (Rodrigo)
- Cannonlake port register fix (Mahesh)
- Fix Dell Venue 8 Pro black screen after modeset (Hans)
- Fix for always returning zero out-fence from execbuf (Daniele)
- Fix HDMI audio when no no relevant video output is active (Jani)
- Fix memleak of VBT data on driver_unload (Hans)
- Fix for KASAN found locking issue (Maarten)
- RCU barrier consolidation to improve igt/gem_sync/idle (Chris)
- Optimizations to IRQ handlers (Chris)
- vblank tracking improvements (64-bit resolution, PM) (Dhinakaran)
- Pipe select bit corrections (Ville)
- Reduce runtime computed device_info fields (Chris)
- Tune down some WARN_ONs to GEM_BUG_ON now that CI has good coverage (Chris)
- A bunch of kerneldoc warning fixes (Chris)
* tag 'drm-intel-next-2018-02-21' of git://anongit.freedesktop.org/drm/drm-intel: (113 commits)
drm/i915: Update DRIVER_DATE to 20180221
drm/i915/fbc: Use PLANE_HAS_FENCE to determine if the plane is fenced
drm/i915/fbdev: Use the PLANE_HAS_FENCE flags from the time of pinning
drm/i915: Move the policy for placement of the GGTT vma into the caller
drm/i915: Also check view->type for a normal GGTT view
drm/i915: Drop WaDoubleCursorLP3Latency:ivb
drm/i915: Set the primary plane pipe select bits on gen4
drm/i915: Don't set cursor pipe select bits on g4x+
drm/i915: Assert that we don't overflow frontbuffer tracking bits
drm/i915: Track number of pending freed objects
drm/i915/: Initialise trans_min for skl_compute_transition_wm()
drm/i915: Clear the in-use marker on execbuf failure
drm/i915: Prune gen8_gt_irq_handler
drm/i915: Track GT interrupt handling using the master iir
drm/i915: Remove WARN_ONCE for failing to pm_runtime_if_in_use
drm: intel_dpio_phy: fix kernel-doc comments at nested struct
drm/i915: Release connector iterator on a digital port conflict.
drm/i915/execlists: Remove too early assert
drm/i915: Assert that we always complete a submission to guc/execlists
drm: move read_domains and write_domain into i915
...
- Expose thermal thresholds through hwmon properly
- Rework HDP flushing for rings and CPU
- Improved dual-link DVI handling in DC
- Lots of code clean up
- Additional DC clean up
- Allow scanout from system memory on CZ/BR/ST
- Improved PASID/VM integration
- Expose GPU voltage and power via hwmon
- Initial wattman-like support
- Initial power profiles for use-case optimized performance
- Rework GPUVM TLB flushing
- Rework IP offset handling for SOC15 asics
- Add CRC support in DC
- Fixes for mmhub powergating
- Initial regamma/degamma/CTM support in DC
- ttm cleanups and simplifications
- ttm OOM avoidance fixes
* 'drm-next-4.17' of git://people.freedesktop.org/~agd5f/linux: (348 commits)
Revert "drm/radeon/pm: autoswitch power state when in balanced mode"
drm/radeon: use drm_gem_private_object_init
drm/amdgpu: use drm_gem_private_object_init
drm/amdgpu: mitigate workaround for i915
drm/amdgpu: implement amdgpu_gem_map_(attach/detach)
drm/amdgpu/powerplay/smu7: drop refresh rate checks for mclk switching
drm/amdgpu/cgs: add refresh rate checking to non-DC display code
drm/amd/powerplay/smu7: allow mclk switching with no displays
drm/amd/powerplay/vega10: allow mclk switching with no displays
drm/amd/powerplay: use PP_CAP macro for disable_mclk_switching_for_frame_lock
drm/amd/powerplay: remove unused headers
drm/amdgpu_gem: fix error handling path in amdgpu_gem_va_update_vm
drm/amdgpu: update the PASID mapping only on demand
drm/amdgpu: separate PASID mapping from VM flush v2
drm/amd/display: Fix increment when sampling OTF in DCE
drm/amd/display: De PQ implementation
drm/amd/display: Remove unused dm_pp_ interfaces
drm/amd/display: Add logging for aux DPCD access
drm/amd/display: Set vsc pack revision when DPCD revision is >= 1.2
drm/amd/display: provide an interface to query firmware version
...
Rename ttm_bo_add_ttm to ttm_tt_create and move it into ttm_tt.c.
v2: separate the cleanup.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the free mem space and the lower limit both include two parts:
system memory and swap space.
For the OOM triggered by TTM, that is the case as below:
first swap space is full of swapped out pages and soon
system memory also is filled up with ttm pages. and then
any memory allocation request will run into OOM.
to cover two cases:
a. if no swap disk at all or free swap space is under swap mem
limit but available system mem is bigger than sys mem limit,
allow TTM allocation;
b. if the available system mem is less than sys mem limit but
free swap space is bigger than swap mem limit, allow TTM
allocation.
v2: merge two memory limit(swap and system) into one
v3: keep original behavior except ttm_opt_ctx->flags with
TTM_OPT_FLAG_FORCE_ALLOC
v4: always set force_alloc as tx->flags & TTM_OPT_FLAG_FORCE_ALLOC
v5: add an attribute for lower_mem_limit
v6: set lower_mem_limit as 0 to keep original behavior
Signed-off-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Never used as parameter, the only driver actually using this is nouveau
and there it is initialized after the BO is initialized.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only used by the AGP backend and there it can be easily accessed using
ttm->bdev->glob.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The pointer is available as ttm->bdev->glob as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The pointer is available as bo->bdev->glob as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
set TTM_OPT_FLAG_FORCE_ALLOC when we are servicing for page
fault routine.
for ttm_mem_global_reserve if in page fault routine, allow the gtt
pages reservation always. because page fault routing already grabbed
system memory and the allowance of this exception is harmless.
Otherwise, it will trigger OOM killer.
will be used later.
v2: set the FORCE_ALLOC always
v3: minor refine
Signed-off-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
for saving memory and more bit flag can be used in future
Signed-off-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nouveau only exposes support for XBGR2101010. Prior to the atomic
conversion, drm would pass in the wrong format in the framebuffer, but
it was always ignored -- both userspace (xf86-video-nouveau) and the
kernel driver agreed on the layout, so the fact that the format was
wrong didn't matter.
With the atomic conversion, nouveau all of a sudden started caring about
the exact format, and so the previously-working code in
xf86-video-nouveau no longer functioned since the (internally-assigned)
format from the addfb ioctl was wrong.
This change adds infrastructure to allow a drm driver to specify that it
prefers the XBGR format variant for the addfb ioctl, and makes nouveau's
nv50 display driver set it. (Prior gens had no support for 30bpp at all.)
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: stable@vger.kernel.org # v4.10+
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180203191123.31507-1-imirkin@alum.mit.edu
If simple_kms_helper based driver needs to work with vblanks,
then it has to provide drm_driver.{enable|disable}_vblank callbacks,
because drm_simple_kms_helper.drm_crtc_funcs does not provide any.
At the same time drm_driver.{enable|disable}_vblank callbacks
are marked as deprecated and shouldn't be used by new drivers.
Fix this by extending drm_simple_kms_helper.drm_crtc_funcs
to provide the missing callbacks.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1518425574-32671-2-git-send-email-andr2000@gmail.com
This is the current PCI ID list in our documentation.
Let's leave the _gt#_ part out for now since our current documentation
is not 100% clear and we don't need this info now anyway.
v2: Use the new ICL_11 naming (Kelvin Gardiner).
v3: Latest IDs as per BSpec (Oscar).
v4: Make it compile (Paulo).
v5: Remove comments (Lucas).
v6: Multile rebases (Paulo).
v7: Rebase (Mika)
Reviewed-by: Anuj Phogat <anuj.phogat@intel.com> (v1)
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180220153755.13509-1-mika.kuoppala@linux.intel.com
drivers, a memory leak on non-blocking commits, a crash on color-eviction.
The is also meson and edid fixes, plus a fix for a doc warning.
-----BEGIN PGP SIGNATURE-----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=555h
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2018-02-21' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Fixes for 4.16. I contains fixes for deadlock on runtime suspend on few
drivers, a memory leak on non-blocking commits, a crash on color-eviction.
The is also meson and edid fixes, plus a fix for a doc warning.
* tag 'drm-misc-fixes-2018-02-21' of git://anongit.freedesktop.org/drm/drm-misc:
drm/tve200: fix kernel-doc documentation comment include
drm/meson: fix vsync buffer update
drm: Handle unexpected holes in color-eviction
drm/edid: Add 6 bpc quirk for CPT panel in Asus UX303LA
drm/amdgpu: Fix deadlock on runtime suspend
drm/radeon: Fix deadlock on runtime suspend
drm/nouveau: Fix deadlock on runtime suspend
drm: Allow determining if current task is output poll worker
workqueue: Allow retrieval of current task's work struct
drm/atomic: Fix memleak on ERESTARTSYS during non-blocking commits
Remove tinydrm_of_find_backlight from tinydrm-helpers.c. We now have
a generic of_find_backlight defined in backlight.c. Let the callers
of tinydrm_of_find_backlight call of_find_backlight. Also, remove
select BACKLIGHT_LCD_SUPPORT and select BACKLIGHT_CLASS_DEVICE from
tinydrm/Kconfig as it is a hack that is no longer needed.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Meghana Madhyastha <meghana.madhyastha@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/11dd1cabd098a730d07ab04c5987b139d14d8b21.1516810725.git.meghana.madhyastha@gmail.com
A bit boring documentation fix, but gets rid of the warnings:
./include/drm/drm_connector.h:370: warning: Function parameter or member 'margins.left' not described in 'drm_tv_connector_state'
./include/drm/drm_connector.h:370: warning: Function parameter or member 'margins.right' not described in 'drm_tv_connector_state'
./include/drm/drm_connector.h:370: warning: Function parameter or member 'margins.top' not described in 'drm_tv_connector_state'
./include/drm/drm_connector.h:370: warning: Function parameter or member 'margins.bottom' not described in 'drm_tv_connector_state'
[Depends on fe7bc493d9 ("scripts: kernel-doc: support in-line comments
on nested structs/unions") in docs-next to actually fix the warnings.]
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180219104009.4887-1-jani.nikula@intel.com
The PL111 needs to filter valid modes based on memory bandwidth.
I guess it is a pretty simple operation, so we can still claim
the DRM KMS helper pipeline is simple after adding this (optional)
vtable callback.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180220072859.3386-1-linus.walleij@linaro.org
Stop calling the driver callback directly.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This to allow drivers to choose to avoid OOM invocation and handle
page allocation failures instead.
v2:
Remove extra new lines.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Introduce a helper to determine if the current task is an output poll
worker.
This allows us to fix a long-standing deadlock in several DRM drivers
wherein the ->runtime_suspend callback waits for the output poll worker
to finish and the worker in turn calls a ->detect callback which waits
for runtime suspend to finish. The ->detect callback is invoked from
multiple call sites and waiting for runtime suspend to finish is the
correct thing to do except if it's executing in the context of the
worker.
v2: Expand kerneldoc to specifically mention deadlock between
output poll worker and autosuspend worker as use case. (Lyude)
Cc: Dave Airlie <airlied@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://patchwork.freedesktop.org/patch/msgid/3549ce32e7f1467102e70d3e9cbf70c46bfe108e.1518593424.git.lukas@wunner.de
i915 is the only driver using those fields in the drm_gem_object
structure, so they only waste memory for all other drivers.
Move the fields into drm_i915_gem_object instead and patch the i915 code
with the following sed commands:
sed -i "s/obj->base.read_domains/obj->read_domains/g" drivers/gpu/drm/i915/*.c drivers/gpu/drm/i915/*/*.c
sed -i "s/obj->base.write_domain/obj->write_domain/g" drivers/gpu/drm/i915/*.c drivers/gpu/drm/i915/*/*.c
Change is only compile tested.
v2: move fields around as suggested by Chris.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180216124338.9087-1-christian.koenig@amd.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
dw_hdmi shouldn't set drvdata since some drivers might need to store
it's own data there. Rework dw_hdmi in a way to return struct dw_hdmi
instead to store it in drvdata. This way drivers are responsible to
store and pass structure when needed.
Idea was taken from the following commit:
8242ecbd59 ("drm/bridge/synopsys: stop clobbering drvdata")
Cc: p.zabel@pengutronix.de
Cc: Laurent.pinchart@ideasonboard.com
Cc: hjc@rock-chips.com
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214200906.31509-6-jernej.skrabec@siol.net
Parts of PHY code could be useful also for custom PHYs. For example,
Allwinner A83T has custom PHY which is probably Synopsys gen2 PHY
with few additional memory mapped registers, so most of the Synopsys PHY
related code could be reused.
Functions exported here are actually not specific to Synopsys PHYs but
to DWC HDMI controller PHY interface. This means that even if the PHY is
completely custom, i.e. not designed by Synopsys, exported functions can
be useful.
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214200906.31509-5-jernej.skrabec@siol.net
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAlqDR7wACgkQlvcN/ahK
BwrxxAgAm3HrrSvtfFPooUsVuodl7KxUF9Mc/MzCNkakP3+Gs0PBE6pp+PhpcBT4
7WwkONTvVKgtnhoIzl8k0Xp8TrDZDWFzpDUluug2knr4nHHkksXtimnz9sfyzGHw
s5XofrV8KQe710grKvUry1VtBrlGRGchd+Xjg1bl+BONnwTmJ8c53npa+d6X0nnt
c+qlP7U9ZawIb59eSL98CuaYsH8oQcMya/jUlb96ky+mx4ugHv9J3ePYIZTqqNDq
/YY1xVhlDQx8iKx7yUp8mreHp5tBL/o3hNNmLMnPDx8jwZfKt7R9MZHH+RRhgl71
TZJmZMUmUyUntVV9NVim8GVHMyDcYQ==
=3uTU
-----END PGP SIGNATURE-----
Merge tag 'topic/hdcp-2018-02-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
Add HDCP support to i915 drm driver.
* tag 'topic/hdcp-2018-02-13' of git://anongit.freedesktop.org/drm/drm-misc: (26 commits)
drm/i915: fix misalignment in HDCP register def
drm/i915: Reauthenticate HDCP on failure
drm/i915: Detect panel's hdcp capability
drm/i915: Optimize HDCP key load
drm/i915: Retry HDCP bksv read
drm/i915: Connector info in HDCP debug msgs
drm/i915: Stop encryption for repeater with no sink
drm/i915: Handle failure from 2nd stage HDCP auth
drm/i915: Downgrade hdcp logs from INFO to DEBUG_KMS
drm/i915: Restore HDCP DRM_INFO when with no downstream
drm/i915: Check for downstream topology errors
drm/i915: Start repeater auth on READY/CP_IRQ
drm/i915: II stage HDCP auth for repeater only
drm/i915: Extending HDCP for HSW, BDW and BXT+
drm/i915/dp: Fix compilation of intel_dp_hdcp_check_link
drm/i915: Only disable HDCP when it's active
drm/i915: Don't allow HDCP on PORT E/F
drm/i915: Implement HDCP for DisplayPort
drm/i915: Implement HDCP for HDMI
drm/i915: Add function to output Aksv over GMBUS
...
UAPI Changes:
- drm/vc4: Expose performance counters to userspace (Boris)
Cross-subsystem Changes:
- MAINTAINERS: Linus to maintain panel-arm-versatile in -misc (Linus)
Core Changes:
- Only use swiotlb when necessary (Chunming)
Driver Changes:
- drm/panel: Add support for ARM Versatile panels (Linus)
- pl111: Improvements around versatile panel support (Linus)
----------------------------------------
Tagged on 2018-02-06:
drm-misc-next for 4.17:
UAPI Changes:
- Validate mode flags + type (Ville)
- Deprecate unused mode flags PIXMUX, BCAST (Ville)
- Deprecate unused mode types BUILTIN, CRTC_C, CLOCK_C, DEFAULT (Ville)
Cross-subsystem Changes:
- MAINTAINERS: s/Daniel/Maarten/ for drm-misc (Daniel)
Core Changes:
- gem: Export gem functions for drivers to use (Samuel)
- bridge: Introduce bridge timings in drm_bridge (Linus)
- dma-buf: Allow exclusive fence to be bundled in fence array when
calling reservation_object_get_fences_rcu (Christian)
- dp: Add training pattern 4 and HBR3 support to dp helpers (Manasi)
- fourcc: Add alpha bit to formats to avoid driver format LUTs (Maxime)
- mode: Various cleanups + add new device-wide .mode_valid hook (Ville)
- atomic: Fix state leak when non-blocking commits fail (Leo)
NOTE: IIRC, this was cross-picked to -fixes so it might fall out
- crc: Allow polling on the data fd (Maarten)
Driver Changes:
- bridge/vga-dac: Add THS8134* support (Linus)
- tinydrm: Various MIPI DBI improvements/cleanups (Noralf)
- bridge/dw-mipi-dsi: Cleanups + use create_packet helper (Brian)
- drm/sun4i: Add Display Engine frontend support (Maxime)
- drm/sun4i: Add zpos support + increase num planes from 2 to 4 (Maxime)
- various: Use drm_mode_get_hv_timing() to fill plane clip rectangle (Ville)
- stm: Add 8-bit clut support, add dsi phy v1.31 support, +fixes (Phillipe)
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Chunming Zhou <david1.zhou@amd.com>
Cc: Samuel Li <Samuel.Li@amd.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAlqDUjcACgkQlvcN/ahK
Bwp83Af8D805yWeS/rJ9pLaiaWmfuymMtZVl/IOEssElxFO4d+ya/S4HrcWJQwX6
KinIQiaytKKe3+TXhVRVVwg7nLBFXzaPey6SvFPCgSEa+Bm+b3v0Uk1ll59UfOzs
/IhwIYIvUSCqTVAccpoT8X/85JUQ3iP41RbdfbBwUtpvL+XLl/y29Pw1dtV71ZCH
I3/5zAk3odLd9LuPkyhtg+V1e8pluKlPVGZ0ElOiZ7HlKzc3ekOLNNj563LBHq8y
b2txi2+h/bfBx7PU5JfP6aOKGGameE79/3UExwW0dJJAHqU728KKs/7OaDu7w0vr
UlH0cY/Zc461ejPldXXx8hoKIxJ3bw==
=5EUv
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2018-02-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 4.17:
UAPI Changes:
- drm/vc4: Expose performance counters to userspace (Boris)
Cross-subsystem Changes:
- MAINTAINERS: Linus to maintain panel-arm-versatile in -misc (Linus)
Core Changes:
- Only use swiotlb when necessary (Chunming)
Driver Changes:
- drm/panel: Add support for ARM Versatile panels (Linus)
- pl111: Improvements around versatile panel support (Linus)
----------------------------------------
Tagged on 2018-02-06:
drm-misc-next for 4.17:
UAPI Changes:
- Validate mode flags + type (Ville)
- Deprecate unused mode flags PIXMUX, BCAST (Ville)
- Deprecate unused mode types BUILTIN, CRTC_C, CLOCK_C, DEFAULT (Ville)
Cross-subsystem Changes:
- MAINTAINERS: s/Daniel/Maarten/ for drm-misc (Daniel)
Core Changes:
- gem: Export gem functions for drivers to use (Samuel)
- bridge: Introduce bridge timings in drm_bridge (Linus)
- dma-buf: Allow exclusive fence to be bundled in fence array when
calling reservation_object_get_fences_rcu (Christian)
- dp: Add training pattern 4 and HBR3 support to dp helpers (Manasi)
- fourcc: Add alpha bit to formats to avoid driver format LUTs (Maxime)
- mode: Various cleanups + add new device-wide .mode_valid hook (Ville)
- atomic: Fix state leak when non-blocking commits fail (Leo)
NOTE: IIRC, this was cross-picked to -fixes so it might fall out
- crc: Allow polling on the data fd (Maarten)
Driver Changes:
- bridge/vga-dac: Add THS8134* support (Linus)
- tinydrm: Various MIPI DBI improvements/cleanups (Noralf)
- bridge/dw-mipi-dsi: Cleanups + use create_packet helper (Brian)
- drm/sun4i: Add Display Engine frontend support (Maxime)
- drm/sun4i: Add zpos support + increase num planes from 2 to 4 (Maxime)
- various: Use drm_mode_get_hv_timing() to fill plane clip rectangle (Ville)
- stm: Add 8-bit clut support, add dsi phy v1.31 support, +fixes (Phillipe)
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Chunming Zhou <david1.zhou@amd.com>
Cc: Samuel Li <Samuel.Li@amd.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Cc: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
* tag 'drm-misc-next-2018-02-13' of git://anongit.freedesktop.org/drm/drm-misc: (115 commits)
drm/radeon: only enable swiotlb path when need v2
drm/amdgpu: only enable swiotlb alloc when need v2
drm: add func to get max iomem address v2
drm/vc4: Expose performance counters to userspace
drm: Print the pid when debug logging an ioctl error.
drm/stm: ltdc: remove non-alpha color formats on layer 2 for older hw
drm/stm: ltdc: add non-alpha color formats
drm/bridge/synopsys: dsi: Add 1.31 version support
drm/bridge/synopsys: dsi: Add read feature
drm/pl111: Support multiple endpoints on the CLCD
drm/pl111: Support variants with broken VBLANK
drm/pl111: Support variants with broken clock divider
drm/pl111: Handle the Versatile RGB/BGR565 mode
drm/pl111: Properly detect the ARM PL110 variants
drm/panel: Add support for ARM Versatile panels
drm/panel: Device tree bindings for ARM Versatile panels
drm/bridge: Rename argument from crtc to bridge
drm/crc: Add support for polling on the data fd.
drm/sun4i: Use drm_mode_get_hv_timing() to populate plane clip rectangle
drm/rcar-du: Use drm_mode_get_hv_timing() to populate plane clip rectangle
...
UAPI Changes:
- Userspace whitelist register GEN9_SLICE_COMMON_ECO_CHICKEN1 for GLK (Kenneth)
- Non-existent PMU counters are not placed to sysfs (Tvrtko)
- Add a note to deprecate I915_SET_COLORKEY_NONE and ignore it (Ville)
* Intel DDX never ended using it, and implementation was wonky
Core Changes:
- Moved away from struct timeval into ktime_t in prep for 2038 (Arnd)
* Merged the i915 portion through drm-tip, no core dependencies
Driver Changes:
- Base support for Icelake and Icelake PCH (Anusha, Rodrigo, Mahesh, Paulo, James, Kelvin)
- Add AUX-F port support for Cannonlake (Rodrigo)
- New DMC firmware for 1.07 Cannonlake (Anusha)
* Go to linux-firmware.git to get it
- Reject non-cursor planes nearly (3 px) out of screen on GLK/CNL (Imre)
- Y/Yf modifiers restored for SKL+ sprites (Ville)
- Compressed framebuffer support for sprites (Ville)
- Tune down overly aggressive shrinking (Chris)
- Shrink kmem caches when GPU is idle (Chris)
- EDID bit-banging fallback for HDMI EDID (Stefan)
- Don't boost the GPU when the waited request is already running (Chris)
- Avoid GLK/BXT CDCLK frequency locking timeouts (Imre)
- Limit DP link rate according to VBT on CNL+ (Jani)
- Skip post-reset request emission if the engine is not idle (Chris)
- Report any link training error on a fixed eDP panel as errors (Manasi)
- DSI panel fixes for Bay Trail (Hans)
- Selftest additions and improvements (Chris, Matt)
- DMA fence test additions and accompanying fixes (Chris)
- Power domain vs. register access fix (Maarten)
- Squelch warnings for people with teensy framebuffers (stride < 512) (Maarten)
- Increase Render/Media power gating hysteresis for Gen9+ (Chris)
- HDMI vswing display workaround for Gen9+ (Ville)
- GuC code cleanup and lockdep fixes (Sagar, Michal Wa.)
- Continuously run hangcheck for simplicity (Chris)
- Execlist debugging improvements (Chris)
- GuC debugging improvements (Sujaritha, Michal Wa., Sagar)
- Command parser boundary checks (Michal Srb)
- Add a workaround for 3DSTATE_SAMPLE_PATTERN on CNL (Rafael)
- Fix PMU enabling race condition (Tvrtko)
- Usual smaller testing and debugging improvements
* tag 'drm-intel-next-2018-02-07' of git://anongit.freedesktop.org/drm/drm-intel: (158 commits)
drm/i915: Update DRIVER_DATE to 20180207
drm/i915/pmu: Fix PMU enable vs execlists tasklet race
drm/i915/cnl: WaPipeControlBefore3DStateSamplePattern
drm/i915/cmdparser: Do not check past the cmd length.
drm/i915/cmdparser: Check reg_table_count before derefencing.
drm/i915: Deprecate I915_SET_COLORKEY_NONE
drm/i915: Skip post-reset request emission if the engine is not idle
drm/i915/execlists: Move the reset bits to a more natural home
drm/i915/selftests: Use a sacrificial context for hang testing
drm/i915/selftests: Flush old resets between engines
drm/i915/breadcrumbs: Drop request reference for the signaler thread
drm/i915: Remove unbannable context spam from reset
drm/i915/execlists: Remove the startup spam
drm/i915: Show the GPU state when declaring wedged
drm/i915: Always update the no_fbc_reason when disabling
drm/i915: Add some newlines to intel_engine_dump() headers
drm/i915: Report if an unbannable context is involved in a GPU hang
drm/i915: Remove spurious DRM_ERROR for cancelled interrupts
drm/i915/execlists: Flush GTIIR on clearing CS interrupts during reset
drm/i915: reduce indent in pch detection
...
The HW frame counter can get reset if device enters a low power state after
vblank interrupts were disabled. This messes up any following vblank count
update as a negative diff (huge unsigned diff) is calculated from the HW
frame counter change. We cannot ignore negative diffs altogther as there
could be legitimate wrap arounds. So, allow drivers to update vblank->count
with missed vblanks for the time interrupts were disabled. This is similar
to _crtc_vblank_on() except that vblanks interrupts are not enabled at the
end as this function is expected to be called from the driver
_enable_vblank() vfunc.
v2: drm_crtc_vblank_restore should take crtc as arg. (Chris)
Add docs and sprinkle some asserts.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Dänzer <michel@daenzer.net>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180203051302.9974-9-dhinakaran.pandiyan@intel.com
570e86963a ("drm: Widen vblank count to 64-bits [v3]") changed the
return type for drm_crtc_vblank_count() to u64.
The flip ioctl receives a 32-bit target sequence from user space and is
compared against the current sequence from drm_crtc_vblank_count(). So,
typecast return from drm_crtc_vblank_count() explicitly to add clarity.
__drm_crtcs_state.last_vblank_count however only ever stores the value from
drm_crtc_vblank_count() and can be upgraded to u64.
Cc: Keith Packard <keithp@keithp.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180203051302.9974-7-dhinakaran.pandiyan@intel.com
drm_vblank_count() has an u32 type returning what is a 64-bit vblank count.
The effect of this is when drm_wait_vblank_ioctl() tries to widen the user
space requested vblank sequence using this clipped 32-bit count(when the
value is >= 2^32) as reference, the requested sequence remains a 32-bit
value and gets queued like that. However, the code that checks if the
requested sequence has passed compares this against the 64-bit vblank
count.
With drm_vblank_count() returning all bits of the vblank count, update
drm_crtc_accurate_vblank_count() so that drm_crtc_arm_vblank_event() queues
the correct sequence. Otherwise, this leads to prolonged waits for a vblank
sequence when the current count is >=2^32.
Finally, fix drm_wait_one_vblank() too.
v2: Commit message fix (Keith)
Squash commits (Rodrigo)
Fixes: 570e86963a ("drm: Widen vblank count to 64-bits [v3]")
Cc: Keith Packard <keithp@keithp.com>
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180203051302.9974-1-dhinakaran.pandiyan@intel.com
Add one missing PCI ID and sort them in a way
that gets easier to review and compare against spec's
table.
When trying to sync libdrm and mesa id list with kernel
and spec I noticed something was wrong and we were missing
a pci id. So to make our lives easier when checking against
spec let's simplify and sort like spec does.
BSpec: 13621
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: James Ausmus <james.ausmus@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180208073219.27860-1-rodrigo.vivi@intel.com
it will be used to check if the driver needs swiotlb
v2: Don't use inline, instead, move function to drm_memory.c (Michel Daenzer <michel@daenzer.net>)
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180209024410.1469-1-david1.zhou@amd.com
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJacnVwAAoJEAx081l5xIa+HhIP/0yDg5tuco0QN3YskE/bIa3o
4VDWsLi+WCoSZoV4uWLKYK8OHiNzKdnGfNoUNWqRqaYilWDtpgBX86Wjg5hxnGwA
/6jGfU1nhb0teG9clGBbzgxHXW6iKvT+p/Pp1pC8HXU+zEUaungJcWY120hITwMD
NqUGK6kYRsJVYj+4b+5Ho7Fvv912bbjK0YAptD6RdzX4rDPN0D+XrtXlYsg1PJYx
jv/NNWEP5mCesYKsS8JzHYcfOF/vdQpPwAV4C3LKaQy5k3pVVIDOEuOycIZTKMf3
K/fSsbvhHMH3Ck+lPcK+etcoQbkLCcmKbw+3uvM/7njkn7Dp24Ryk9FXB3dXXOgb
3kLs7f0gY9j/NAi3uKAMvACPvXNA7eptIvAmN/VKzmEiqgx+l0sveSuU73DVoe/x
Jko8ijyiKchcN+/CTgZ7FNyEd0UWO06+9B0RMrlEezE8f14EhR51wIQQTNFJRJn/
kqRM1hC2Cvb00vAwq7jjZcDa7hRCI0OoVU9N37smtPuTJY94tR/CUbq10g4pSlu8
h8FiHnLuhlyh1DQNNS19HQfOSh0yYgEGRQcIKy3vqshsO3/hbe8bQD5UerqMZPZB
ZpMEWe5VHSWIVjAxgzHNXFd9F/jSeWDVkCztKfx0CLmzHZNLNjw+/zgbIdF3vj9T
S1cwFZLWr/ngf5mbyR88
=pLN1
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
"This seems to have been a comparatively quieter merge window, I assume
due to holidays etc. The "biggest" change is AMD header cleanups, which
merge/remove a bunch of them. The AMD gpu scheduler is now being made generic
with the etnaviv driver wanting to reuse the code, hopefully other drivers
can go in the same direction.
Otherwise it's the usual lots of stuff in i915/amdgpu, not so much stuff
elsewhere.
Core:
- Add .last_close and .output_poll_changed helpers to reduce driver footprints
- Fix plane clipping
- Improved debug printing support
- Add panel orientation property
- Update edid derived properties at edid setting
- Reduction in fbdev driver footprint
- Move amdgpu scheduler into core for other drivers to use.
i915:
- Selftest and IGT improvements
- Fast boot prep work on IPS, pipe config
- HW workarounds for Cannonlake, Geminilake
- Cannonlake clock and HDMI2.0 fixes
- GPU cache invalidation and context switch improvements
- Display planes cleanup
- New PMU interface for perf queries
- New firmware support for KBL/SKL
- Geminilake HW workaround for perforamce
- Coffeelake stolen memory improvements
- GPU reset robustness work
- Cannonlake horizontal plane flipping
- GVT work
amdgpu/radeon:
- RV and Vega header file cleanups (lots of lines gone!)
- TTM operation context support
- 48-bit GPUVM support for Vega/RV
- ECC support for Vega
- Resizeable BAR support
- Multi-display sync support
- Enable swapout for reserved BOs during allocation
- S3 fixes on Raven
- GPU reset cleanup and fixes
- 2+1 level GPU page table
amdkfd:
- GFX7/8 SDMA user queues support
- Hardware scheduling for multiple processes
- dGPU prep work
rcar:
- Added R8A7743/5 support
- System suspend/resume support
sun4i:
- Multi-plane support for YUV formats
- A83T and LVDS support
msm:
- Devfreq support for GPU
tegra:
- Prep work for adding Tegra186 support
- Tegra186 HDMI support
- HDMI2.0 and zpos support by using generic helpers
tilcdc:
- Misc fixes
omapdrm:
- Support memory bandwidth limits
- DSI command mode panel cleanups
- DMM error handling
exynos:
- drop the old IPP subdriver.
etnaviv:
- Occlusion query fixes
- Job handling fixes
- Prep work for hooking in gpu scheduler
armada:
- Move closer to atomic modesetting
- Allow disabling primary plane if overlay is full screen
imx:
- Format modifier support
- Add tile prefetch to PRE
- Runtime PM support for PRG
ast:
- fix LUT loading"
* tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linux: (1471 commits)
drm/ast: Load lut in crtc_commit
drm: Check for lessee in DROP_MASTER ioctl
drm: fix gpu scheduler link order
drm/amd/display: Demote error print to debug print when ATOM impl missing
dma-buf: fix reservation_object_wait_timeout_rcu once more v2
drm/amdgpu: Avoid leaking PM domain on driver unbind (v2)
drm/amd/amdgpu: Add Polaris version check
drm/amdgpu: Reenable manual GPU reset from sysfs
drm/amdgpu: disable MMHUB power gating on raven
drm/ttm: Don't unreserve swapped BOs that were previously reserved
drm/ttm: Don't add swapped BOs to swap-LRU list
drm/amdgpu: only check for ECC on Vega10
drm/amd/powerplay: Fix smu_table_entry.handle type
drm/ttm: add VADDR_FLAG_UPDATED_COUNT to correctly update dma_page global count
drm: Fix PANEL_ORIENTATION_QUIRKS breaking the Kconfig DRM menuconfig
drm/radeon: fill in rb backend map on evergreen/ni.
drm/amdgpu/gfx9: fix ngg enablement to clear gds reserved memory (v2)
drm/ttm: only free pages rather than update global memory count together
drm/amdgpu: fix CPU based VM updates
drm/amdgpu: fix typo in amdgpu_vce_validate_bo
...
During a non-blocking commit, it is possible to return before the
commit_tail work is queued (-ERESTARTSYS, for example).
Since a reference on the crtc commit object is obtained for the pending
vblank event when preparing the commit, the above situation will leave
us with an extra reference.
Therefore, if the commit_tail worker has not consumed the event at the
end of a commit, release it's reference.
Changes since v1:
- Also check for state->event->base.completion being set, to
handle the case where stall_checks() fails in setup_crtc_commit().
Changes since v2:
- Add a flag to drm_crtc_commit, to prevent dereferencing a freed event.
i915 may unreference the state in a worker.
Fixes: 24835e442f ("drm: reference count event->completion")
Cc: <stable@vger.kernel.org> # v4.11+
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com> #v1
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180117115108.29608-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Pull poll annotations from Al Viro:
"This introduces a __bitwise type for POLL### bitmap, and propagates
the annotations through the tree. Most of that stuff is as simple as
'make ->poll() instances return __poll_t and do the same to local
variables used to hold the future return value'.
Some of the obvious brainos found in process are fixed (e.g. POLLIN
misspelled as POLL_IN). At that point the amount of sparse warnings is
low and most of them are for genuine bugs - e.g. ->poll() instance
deciding to return -EINVAL instead of a bitmap. I hadn't touched those
in this series - it's large enough as it is.
Another problem it has caught was eventpoll() ABI mess; select.c and
eventpoll.c assumed that corresponding POLL### and EPOLL### were
equal. That's true for some, but not all of them - EPOLL### are
arch-independent, but POLL### are not.
The last commit in this series separates userland POLL### values from
the (now arch-independent) kernel-side ones, converting between them
in the few places where they are copied to/from userland. AFAICS, this
is the least disruptive fix preserving poll(2) ABI and making epoll()
work on all architectures.
As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and
it will trigger only on what would've triggered EPOLLWRBAND on other
architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered
at all on sparc. With this patch they should work consistently on all
architectures"
* 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
make kernel-side POLL... arch-independent
eventpoll: no need to mask the result of epi_item_poll() again
eventpoll: constify struct epoll_event pointers
debugging printk in sg_poll() uses %x to print POLL... bitmap
annotate poll(2) guts
9p: untangle ->poll() mess
->si_band gets POLL... bitmap stored into a user-visible long field
ring_buffer_poll_wait() return value used as return value of ->poll()
the rest of drivers/*: annotate ->poll() instances
media: annotate ->poll() instances
fs: annotate ->poll() instances
ipc, kernel, mm: annotate ->poll() instances
net: annotate ->poll() instances
apparmor: annotate ->poll() instances
tomoyo: annotate ->poll() instances
sound: annotate ->poll() instances
acpi: annotate ->poll() instances
crypto: annotate ->poll() instances
block: annotate ->poll() instances
x86: annotate ->poll() instances
...
The only difference is that this SKUs has the full
Port A/E split named as Port F.
But since SKUs differences don't matter on the platform
definition group and ids, let's merge all off them together.
v2: Really include the PCI IDs to the picidlist[];
v3: Add the PCI Id for another SKU (Anusha).
v4: Update IDs, really include to pciidlists again.
v5: Unify all GT2 IDs.
v6: Unify in a way that we don't break early-quirks.c
v7: Remove GT reference since it doesn't matter here (Paulo)
Also move IS_CNL_WITH_PORT_F macro to this patch to
make it easier for review this part and also to get
used sooner.
v8: Rebased on top of commit 5db47e37b3 ("Revert "drm/i915:
mark all device info struct with __initconst"")
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180129232223.766-1-rodrigo.vivi@intel.com
During a non-blocking commit, it is possible to return before the
commit_tail work is queued (-ERESTARTSYS, for example).
Since a reference on the crtc commit object is obtained for the pending
vblank event when preparing the commit, the above situation will leave
us with an extra reference.
Therefore, if the commit_tail worker has not consumed the event at the
end of a commit, release it's reference.
Changes since v1:
- Also check for state->event->base.completion being set, to
handle the case where stall_checks() fails in setup_crtc_commit().
Changes since v2:
- Add a flag to drm_crtc_commit, to prevent dereferencing a freed event.
i915 may unreference the state in a worker.
Fixes: 24835e442f ("drm: reference count event->completion")
Cc: <stable@vger.kernel.org> # v4.11+
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com> #v1
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180117115108.29608-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Allow drivers to provide a device wide .mode_valid() hook in addition to
the already existing crtc/encoder/bridge/connector hooks. This can be
used to validate device/driver wide constraings without having to add
those to the other hooks. And since we call this hook also for user
modes later on in the modeset we don't have to worry about anything the
hook has already rejected.
I also have some further ideas for this hook. Eg. we could replace the
drm_mode_set_crtcinfo(HALVE_V) call in drm_mode_convert_umode()/etc.
with a driver specific variant via this hook. At least on i915 we would
like to pass CRTC_STEREO_DOUBLE to that function instead, and then
we could safely use the crtc_ timings in all our .mode_valid() hooks,
which would allow us to reuse those hooks for validating the
adjusted_mode during a modeset.
v2: Fix the language fails in the kernel docs (Daniel)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114183258.16976-10-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
BUILTIN, CRTC_C, CLOCK_C, and DEFULT mode types are unused. Let's
refuse to generate them or accept them from userspace either. A
cursory check didn't reveal any userspace code that would depend
on these.
v2: Recommend DRIVER instead of BUILTIN (ajax)
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Adam Jackson <ajax@redhat.com>
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115154504.14338-1-ville.syrjala@linux.intel.com
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Reject any mode with DRM_MODE_FLAG_BCAST. We have no code that even
checks for this flag hence it can't possibly do any good.
I think this maybe originated from fbdev where it was supposed to
indicate PAL/NTSC broadcast timings. I have no idea why those would
have to be identified by a flag rather than by just the timings
themselves. And then I assume it got copied into xfree86 for
fbdevhw, and later on it leaked into the randr protocol and kms uapi.
Since kms fbdev emulation never uses the corresponding fbdev flag
there should be no sane way for this to come back into kms via
userspace either.
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Adam Jackson <ajax@redhat.com>
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114183258.16976-5-ville.syrjala@linux.intel.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Reject any mode with DRM_MODE_FLAG_PIXMUX. We have no code that even
checks for this flag hence it can't possibly do any good.
Looks like this flag had something to do the the controller<->ramdac
interface with some ancient S3 graphics adapters. Why someone though
it would be a good idea to expose it directly to users I don't know.
And later on it got copied into the randr protocol and kms uapi.
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Adam Jackson <ajax@redhat.com>
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114183258.16976-4-ville.syrjala@linux.intel.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
There's a bunch of drivers that duplicate the same function to know if a
particular format embeds an alpha component or not.
Let's create a field in the drm_format_info to avoid duplicating that logic
and looking up formats all the time.
Cc: Eric Anholt <eric@anholt.net>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9cd9951d147ff810c1f6f68d79e7983361ed6b68.1516617243.git-series.maxime.ripard@free-electrons.com
DP 1.4 spec adds a TPS4 training pattern sequence required for
HBR3. This patch adds the corresponding bit definitions in
MAX_DOWNSPREAD register and TRAINING_PATTERN_SET and
inline functions to check if this bit is set and for selecting
a proper TRAINING_PATTERN_MASK that changed to 0x7 on
DP spec 1.4
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1516660991-20697-2-git-send-email-manasi.d.navare@intel.com
Some Cannonlake SKUs will come with a full split between
port A and port E. This will be called port F although it
is not a 6th port, but only a split.
Note this patch alone is not sufficient for port F enabling,
it's just the first step.
v2: Fix size of dvo_ports found by Ander.
v3: Adding missing cases from intel_bios.c for Port_F
v4: Adding other missing cases and fix the commit message.
v5: Rebase on top of display headers rework.
v6 (from Paulo): improve commit message, bikeshed bit definitions.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111180010.24357-2-paulo.r.zanoni@intel.com
It's been a while since we've backmerged drm-next. Dave just brought
back 4.15-rc8, so now's a good time to freshen things up around here.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
HDCP compliant Repeaters can support max of 127 devices and max
depth of 7 for downstream topology.
If these max limits are exceeded, repeater will set the
topology error flags MAX_CASCADE_EXCEEDED and/or MAX_DEVS_EXCEEDED
in Bstatus followed by asserting READY/CP_IRQ for HDCP transmitter.
This patch check for these error flags as soon as READY bit is asserted.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
[seanpaul fixed checkpatch alignment issue]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1516254488-4971-5-git-send-email-ramalingam.c@intel.com
It's better to leave power handling and controller init to the
modesetting machinery using the simple pipe .enable and .disable
callbacks. Remove unused mipi_dbi_pipe_enable().
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180110185940.53841-6-noralf@tronnes.org
After some discussion and failed patch sets trying to convey
the right timing information between the display engine and
a bridge using the connector, I try instead to use an optional
timing information container in the bridge itself, so that
display engines can retrieve it from any bridge and use it to
determine how to drive outputs.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180112074854.9560-2-linus.walleij@linaro.org
No one will use this function except ttm_bo_io_mem_pfn() now, so move
the calculation of ttm_bo_default_io_mem_pfn() into ttm_bo_io_mem_pfn()
and do some cleanup.
Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bridge drivers/helpers shouldn't be clobbering the drvdata, since a
parent driver might need to own this. Instead, let's return our
'dw_mipi_dsi' object and have callers pass that back to us for removal.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171128010538.119114-1-briannorris@chromium.org
Last few updates for 4.16:
- Misc fixes for amdgpu
- Enable swapout for reserved BOs during allocation for ttm
- Misc cleanups for ttm
* 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux: (24 commits)
drm/amdgpu: Correct the IB size of bo update mapping.
drm/ttm: enable swapout for reserved BOs during allocation
drm/ttm: add new function to check if bo is allowable to evict or swapout
drm/ttm: use an operation ctx for ttm_tt_bind
drm/ttm: use an operation ctx for ttm_tt_populate in ttm_bo_driver (v2)
drm/ttm: use an operation ctx for ttm_mem_global_alloc_page
drm/ttm: use an operation ctx for ttm_mem_global_alloc
drm/ttm: call ttm_bo_swapout directly when ttm shrink
drm/vmwgfx: remove the default io_mem_pfn set
drm/virtio: remove the default io_mem_pfn set
drm/radeon: remove the default io_mem_pfn set
drm/qxl: remove the default io_mem_pfn set
drm/nouveau: remove the default io_mem_pfn set
drm/mgag200: remove the default io_mem_pfn set
drm/cirrus: remove the default io_mem_pfn set
drm/bochs: remove the default io_mem_pfn set
drm/ast: remove the default io_mem_pfn set
drm/ttm: add ttm_bo_io_mem_pfn to check io_mem_pfn
drm/amdgpu: fix VM faults with per VM BOs
drm/ttm: drop the spin in delayed delete if the trylock doesn't work
...
In preparation for implementing HDCP in i915, add some HDCP related
register offsets and defines. The dpcd register offsets will go in
drm_dp_helper.h whereas the ddc offsets along with generic HDCP stuff
will get stuffed in drm_hdcp.h, which is new.
Changes in v2:
- drm_hdcp.h gets MIT license (Daniel)
Changes in v3:
- None
Changes in v4:
- None
Changes in v5:
- None
Changes in v6:
- SPDX license
Cc: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Ramalingam C <ramalingm.c@intel.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180108195545.218615-5-seanpaul@chromium.org
This patch adds a new optional connector property to allow userspace to enable
protection over the content it is displaying. This will typically be implemented
by the driver using HDCP.
The property is a tri-state with the following values:
- OFF: Self explanatory, no content protection
- DESIRED: Userspace requests that the driver enable protection
- ENABLED: Once the driver has authenticated the link, it sets this value
The driver is responsible for downgrading ENABLED to DESIRED if the link becomes
unprotected. The driver should also maintain the desiredness of protection
across hotplug/dpms/suspend.
If this looks familiar, I posted [1] this 3 years ago. We have been using this
in ChromeOS across exynos, mediatek, and rockchip over that time.
Changes in v2:
- Pimp kerneldoc for content_protection_property (Daniel)
- Drop sysfs attribute
Changes in v3:
- None
Changes in v4:
- Changed kerneldoc to recommend userspace polling (Daniel)
- Changed kerneldoc to briefly describe how to attach the property (Daniel)
Changes in v5:
- checkpatch whitespace noise
- Change DRM_MODE_CONTENT_PROTECTION_OFF to DRM_MODE_CONTENT_PROTECTION_UNDESIRED
Changes in v6:
- None
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
[1] https://lists.freedesktop.org/archives/dri-devel/2014-December/073336.html
Link: https://patchwork.freedesktop.org/patch/msgid/20180108195545.218615-4-seanpaul@chromium.org
if the bo shares same reservation object then not lock it again
at swapout time to make it possible to swap out.
v2: refine the commmit message
Reviewed-by: Thomas Hellström <thellstrom@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chuming Zhou <david1.zhou@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
forward the operation context to ttm_tt_bind as well,
and the ultimate goal is swapout enablement for reserved BOs.
v2: use common term rather than amd specific
Reviewed-by: Thomas Hellström <thellstrom@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chuming Zhou <david1.zhou@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
forward the operation context to ttm_tt_populate as well,
and the ultimate goal is swapout enablement for reserved BOs.
v2: squash in fix for vboxvideo
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- More improvements on logs, dumps, and trace (Chris, Michal)
- Coffee Lake important fix for stolen memory (Lucas)
- Continue to make GPU reset more robust as well
improving selftest coverage for it (Chris)
- Unifying debugfs return codes (Michal)
- Using existing helper for testing obj pages (Matthew)
- Organize and improve gem_request tracepoints (Lionel)
- Protect DDI port to DPLL map from theoretical race (Rodrigo)
- ... and consequently fixing the indentation on this DDI clk selection function (Chris)
- ... and consequently properly serializing non-blocking modesets (Ville)
- Add support for horizontal plane flipping on Cannonlake (Joonas)
- Two Cannonlake Workarounds for better stability (Rafael)
- Fix mess around PSR registers (DK)
- More Coffee Lake PCI IDs (Rodrigo)
- Remove CSS modifiers on pipe C of Geminilake (Krisman)
- Disable all planes for load detection (Ville)
- Reorg on i915 display headers (Michal)
- Avoid enabling movntdqa optimization on hypervisor guest (Changbin)
GVT:
- more mmio switch optimization (Weinan)
- cleanup i915_reg_t vs. offset usage (Zhenyu)
- move write protect handler out of mmio handler (Zhenyu)
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaPXCRAAoJEPpiX2QO6xPKxi4IAJmAQCVBEZVz2TI/t6xJIYcl
xGXlghAVlF8i2bRPpi8PioqUbASF1o7sIVjwIWEV+DgrIQT4MQCv1BmqvExlftBw
5mgkKyS+7Itnp7vaioYRmF/YxMoqP1vHF4J6fBScmtHf+RKtlwXQzw+AnlJtg88h
d9mudeDzV5UXB2Prntia3w3sb6oJVKbtgeo+njll2SL6EPaz0sKBEuhcJkKWygtH
4gfneJG0cwIA/rJe4+eIfpnHRiXhhiwofPBYV0eWhBTTo47sKyGxfjpxmEEax1DF
3JUUe9a+2dYqXxOyhLlZEOeCfkcXhkgDmvJTlupWGVV3POIncNlt60lhmuS4t5g=
=wJGr
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2017-12-22' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Allow internal page allocation to fail (Chris)
- More improvements on logs, dumps, and trace (Chris, Michal)
- Coffee Lake important fix for stolen memory (Lucas)
- Continue to make GPU reset more robust as well
improving selftest coverage for it (Chris)
- Unifying debugfs return codes (Michal)
- Using existing helper for testing obj pages (Matthew)
- Organize and improve gem_request tracepoints (Lionel)
- Protect DDI port to DPLL map from theoretical race (Rodrigo)
- ... and consequently fixing the indentation on this DDI clk selection function (Chris)
- ... and consequently properly serializing non-blocking modesets (Ville)
- Add support for horizontal plane flipping on Cannonlake (Joonas)
- Two Cannonlake Workarounds for better stability (Rafael)
- Fix mess around PSR registers (DK)
- More Coffee Lake PCI IDs (Rodrigo)
- Remove CSS modifiers on pipe C of Geminilake (Krisman)
- Disable all planes for load detection (Ville)
- Reorg on i915 display headers (Michal)
- Avoid enabling movntdqa optimization on hypervisor guest (Changbin)
GVT:
- more mmio switch optimization (Weinan)
- cleanup i915_reg_t vs. offset usage (Zhenyu)
- move write protect handler out of mmio handler (Zhenyu)
* tag 'drm-intel-next-2017-12-22' of git://anongit.freedesktop.org/drm/drm-intel: (55 commits)
drm/i915: Update DRIVER_DATE to 20171222
drm/i915: Show HWSP in intel_engine_dump()
drm/i915: Assert that the request is on the execution queue before being removed
drm/i915/execlists: Show preemption progress in GEM_TRACE
drm/i915: Put all non-blocking modesets onto an ordered wq
drm/i915: Disable GMBUS clock gating around GMBUS transfers on gen9+
drm/i915: Clean up the PNV bit banging vs. GMBUS clock gating w/a
drm/i915: No need to power up PG2 for GMBUS on BXT
drm/i915: Disable DC states around GMBUS on GLK
drm/i915: Do not enable movntdqa optimization in hypervisor guest
drm/i915: Dump device info at once
drm/i915: Add pretty printer for runtime part of intel_device_info
drm/i915: Update intel_device_info_runtime_init() parameter
drm/i915: Move intel_device_info definitions to its own header
drm/i915: Move opregion definitions to dedicated intel_opregion.h
drm/i915: Move display related definitions to dedicated header
drm/i915: Move some utility functions to i915_util.h
drm/i915/gvt: move write protect handler out of mmio emulation function
drm/i915/gvt: cleanup usage for typed mmio reg vs. offset
drm/i915/gvt: Fix pipe A enable as default for vgpu
...
forward the operation context to ttm_mem_global_alloc_page as well,
and the ultimate goal is swapout enablement for reserved BOs.
Here reserved BOs refer to all the BOs which share same reservation object
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
forward the operation context to ttm_mem_global_alloc as well, and the
ultimate goal is swapout enablement for reserved BOs
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
remove the extra indirection because we have only one implementation anyway
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Core Changes:
- mostly doc updates and some fbdev improvements
-----BEGIN PGP SIGNATURE-----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=AxYV
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2017-12-21' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 4.16:
Core Changes:
- mostly doc updates and some fbdev improvements
* tag 'drm-misc-next-2017-12-21' of git://anongit.freedesktop.org/drm/drm-misc:
drm/framebuffer: Print task that allocated the fb in debug info.
drm/fb-helper: Add drm_fb_helper_defio_init()
drm/fb-helper: Update DOC with new helpers
drm/docs: Add todo entry for drm_fb_helper_fbdev_setup()
drm/fb-helper: Add drm_fb_helper_fbdev_setup/teardown()
drm/fb-helper: Set/clear dev->fb_helper in dummy init/fini
drm/stm: ltdc: Remove unnecessary platform_get_resource() error check
drm/stm: dsi: Remove unnecessary platform_get_resource() error check
drm/doc: Move legacy kms helpers to the very end
drm/atomic: document how to handle driver private objects
drm/syncobj: some kerneldoc polish
drm/print: Unconfuse kerneldoc
drm/edid: kerneldoc for is_hdmi2_sink
* 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux: (171 commits)
drm/amdgpu: fix test for shadow page tables
drm/amd/display: Expose dpp1_set_cursor_attributes
drm/amd/display: Update FMT and OPPBUF functions
drm/amd/display: check for null before calling is_blanked
drm/amd/display: dal 3.1.27
drm/amd/display: Fix unused variable warnings.
drm/amd/display: Only blank DCN when we have set_blank implementation
drm/amd/display: Put dcn_mi_registers with other structs
drm/amd/display: hubp refactor
drm/amd/display: integrating optc pseudocode
drm/amd/display: Call validate_fbc should_enable_fbc
drm/amd/display: Clean up DCN cursor code
drm/amd/display: fix 180 full screen pipe split
drm/amd/display: reprogram surface config on scaling change
drm/amd/display: Remove dwbc from pipe_ctx
drm/amd/display: Use the maximum link setting which EDP reported.
drm/amd/display: Add hdr_supported flag
drm/amd/display: fix global sync param retrieval when not pipe splitting
drm/amd/display: Update HUBP
drm/amd/display: fix rotated surface scaling
...
- Fix timestamp frequency calculation for perf on CNL (Lionel)
- New DMC firmware for Skylake (Anusha)
- GTT flush fixes and other GGTT write track and refactors (Chris)
- Taint kernel when GPU reset fails (Chris)
- Display workarounds organization (Lucas)
- GuC and HuC initialization clean-up and fixes (Michal)
- Other fixes around GuC submission (Michal)
- Execlist clean-ups like caching ELSP reg offset and improving log readability (Chri\
s)
- Many other improvements on our logs and dumps (Chris)
- Restore GT performance in headless mode with DMC loaded (Tvrtko)
- Stop updating legacy fb parameters since FBC is not using anymore (Daniel)
- More selftest improvements (Chris)
- Preemption fixes and improvements (Chris)
- x86/early-quirks improvements for Intel graphics stolen memory. (Joonas, Matthew)
- Other improvements on Stolen Memory code to be resource centric. (Matthew)
- Improvements and fixes on fence allocation/release (Chris).
GVT:
- fixes for two coverity scan errors (Colin)
- mmio switch code refine (Changbin)
- more virtual display dmabuf fixes (Tina/Gustavo)
- misc cleanups (Pei)
- VFIO mdev display dmabuf interface and gvt support (Tina)
- VFIO mdev opregion support/fixes (Tina/Xiong/Chris)
- workload scheduling optimization (Changbin)
- preemption fix and temporal workaround (Zhenyu)
- and misc fixes after refactor (Chris)
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaMttwAAoJEPpiX2QO6xPK/sgH/3fydh/e++QHMgh4I3Gc18wp
yxxXJLt5i/SldGpv0yTlq1jvZ68R2H5K9fyfeDMrZSszCpZceU5uQZjtSWLpSo8d
N8nccZ1fEEBMyqvWPdL5tM+9z7YpbJJ0gXHYl1ONV5WttXQ2xsxo/fZTMRpTNpGF
WyxGGqEg2eSkdwLlYNqKHB175ssQnxOOtBA6htaMMwyq12GpyztGB4Dy18fHswjL
lqGqUMXuHBLEqI6t7MVa/LyHn1YpE6Q1VXhesBz7htGO0MYIFniI1KKjHRPX+OTC
DXvzBIq6tMi7osJbCUFriu4F0Ko9h4iZOYJI1a9iwADoIIw6Y2xlzFidKd0Zp0I=
=XwCl
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2017-12-14' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Fix documentation build issues (Randy, Markus)
- Fix timestamp frequency calculation for perf on CNL (Lionel)
- New DMC firmware for Skylake (Anusha)
- GTT flush fixes and other GGTT write track and refactors (Chris)
- Taint kernel when GPU reset fails (Chris)
- Display workarounds organization (Lucas)
- GuC and HuC initialization clean-up and fixes (Michal)
- Other fixes around GuC submission (Michal)
- Execlist clean-ups like caching ELSP reg offset and improving log readability (Chri\
s)
- Many other improvements on our logs and dumps (Chris)
- Restore GT performance in headless mode with DMC loaded (Tvrtko)
- Stop updating legacy fb parameters since FBC is not using anymore (Daniel)
- More selftest improvements (Chris)
- Preemption fixes and improvements (Chris)
- x86/early-quirks improvements for Intel graphics stolen memory. (Joonas, Matthew)
- Other improvements on Stolen Memory code to be resource centric. (Matthew)
- Improvements and fixes on fence allocation/release (Chris).
GVT:
- fixes for two coverity scan errors (Colin)
- mmio switch code refine (Changbin)
- more virtual display dmabuf fixes (Tina/Gustavo)
- misc cleanups (Pei)
- VFIO mdev display dmabuf interface and gvt support (Tina)
- VFIO mdev opregion support/fixes (Tina/Xiong/Chris)
- workload scheduling optimization (Changbin)
- preemption fix and temporal workaround (Zhenyu)
- and misc fixes after refactor (Chris)
* tag 'drm-intel-next-2017-12-14' of git://anongit.freedesktop.org/drm/drm-intel: (87 commits)
drm/i915: Update DRIVER_DATE to 20171214
drm/i915: properly init lockdep class
drm/i915: Show engine state when hangcheck detects a stall
drm/i915: make CS frequency read support missing more obvious
drm/i915/guc: Extract doorbell verification into a function
drm/i915/guc: Extract clients allocation to submission_init
drm/i915/guc: Extract doorbell creation from client allocation
drm/i915/guc: Call invalidate after changing the vfunc
drm/i915/guc: Extract guc_init from guc_init_hw
drm/i915/guc: Move GuC workqueue allocations outside of the mutex
drm/i915/guc: Move shared data allocation away from submission path
drm/i915: Unwind i915_gem_init() failure
drm/i915: Ratelimit request allocation under oom
drm/i915: Allow fence allocations to fail
drm/i915: Mark up potential allocation paths within i915_sw_fence as might_sleep
drm/i915: Don't check #active_requests from i915_gem_wait_for_idle()
drm/i915/fence: Use rcu to defer freeing of irq_work
drm/i915: Dump the engine state before declaring wedged from wait_for_engines()
drm/i915: Bump timeout for wait_for_engines()
drm/i915: Downgrade misleading "Memory usable" message
...
Add helper for initializing fbdev deferred I/O.
The cleanup could have happened in drm_fb_helper_fini(), but that would
have required me to set fb_info->fbdefio to NULL in a couple of drivers
before they call _fini() to avoid double defio cleanup. The problem is
that one of those is vboxvideo which lives in Greg's staging tree.
So I put the cleanup in drm_fb_helper_fbdev_teardown(), not perfect
but not that bad either.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171215175119.36181-6-noralf@tronnes.org
Set dev->fb_helper even when fbdev emulation is compiled out,
so drivers can use it to free the structure.
Clear it for consistency.
Fixes: 29ad20b22c ("drm: Add drm_device->fb_helper pointer")
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171215175119.36181-2-noralf@tronnes.org
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaNy81AAoJEHm+PkMAQRiGq2YH/1C1so18qErhPosdfeLIXLbA
iC9XcIvkPuMfjDw4EfSWOzhKnzgqGuc8q/Vzz0ulDreNVUb52nBeRy69QgNoZBTB
NkLdrUKBnlArvRhBXToQGW/s1eI/gobuHBJb7/fbpvsUtPYcDE2nUXAEsMlagn5L
BMHNzE3TByaWj0SqJtZAZvaQN2MdWV8ArHBPaC+MtR2C1VJIyl0mT9CdCu2NpTES
+FncKJ6/qplSBNSUJSfYmFLfEKVcQxvHMi1kp9jOGlVjPM3cOPKRpv8x69x/IPoB
3l82AikL+Ju0738oJ0Fp/IhfGUqpXz+FwUz1JmCdrcOby75RHomJuJCUBTtjXA4=
=lYkx
-----END PGP SIGNATURE-----
BackMerge tag 'v4.15-rc4' into drm-next
Linux 4.15-rc4
Daniel requested it to fix some messy conflicts.
Cross-subsystem Changes:
- Documentation for amlogic dt dt-bindings
Core Changes:
- Update edid-derived drm_display_info fields at edid property set
Driver Changes:
- A bunch of clean up from Noralf, including the last patches to reduce
fbdev emulation footprint.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJaMriBAAoJEEN0HIUfOBk0ZPgP/1LW88oKvCLle6y0z4XHh01h
V1nt906/MkQRMc5F/ktNg7a50rWeuK83AHdSFdjd/00ySFq4pMRwIdUfXvp8nReA
F/6V4KnbCAdx1poW88yAaFe76PlPlTk6C7Pra8NC40qFKGtmAdxtW3ofGfE6mpKe
3j4EilhRX57jyatw5RCB+ut1Ozt8jVs4BVYncnnnZ/dYWif+A6bR1nKq3I0bbNMd
g3wC5VOAyIntMv5OoF494sD0713No3fkmrl2px/qrUuOH1bA9y8G3dWGBRVcupTz
pOxqBJTgVP+InpSP0CCG81eRbsVhQi+2jUxTH5GzsuBhYlDY3yedSQBD5zgmtLoH
2B5Ocrgyd42grWvl0BvQiG7NML8O3dqSDgNJImdQF+uTxhyu2nwBqI2Iyp2N5YMj
tYfm0KNMsGhTH85U40iHrYZyGaWomaXNpAg20U1O3cBULpjA3Xnf7jOtVhI4ImHD
Zj61Le6+YXlleLuxk2LDvGOETQRi8PXr6/mRiuC4xngGXjTituVnnUPIc1/pSKUu
/xRnupXDiRffOoMIVjspeOHrUQknLUyvVB5S4GciVhkH0AHiAe1EMf6+LIQU28EP
O5pzrtEQ8+HcUelnlk68KZKh0YFidn7JMwF3KzmNFwOclIoVfrBbabPI7c2GrVhU
q94BOzj6MSbvrpR5NHCX
=R8BL
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2017-12-14' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 4.16:
Cross-subsystem Changes:
- Documentation for amlogic dt dt-bindings
Core Changes:
- Update edid-derived drm_display_info fields at edid property set
Driver Changes:
- A bunch of clean up from Noralf, including the last patches to reduce
fbdev emulation footprint.
* tag 'drm-misc-next-2017-12-14' of git://anongit.freedesktop.org/drm/drm-misc: (30 commits)
drm/atomic-helper: Make zpos property kerneldoc less misleading
drm: Update edid-derived drm_display_info fields at edid property set [v2]
MAINTAINERS: Remove Jani as drm-misc co-maintainer
drm/tinydrm: Use drm_fb_cma_fbdev_init_with_funcs/fini()
drm/arm/mali: Use drm_fb_cma_fbdev_init/fini()
drm/zte: Use drm_fb_cma_fbdev_init/fini()
drm/vc4: Use drm_fb_cma_fbdev_init/fini()
drm/tve200: Use drm_fb_cma_fbdev_init/fini()
drm/tilcdc: Use drm_fb_cma_fbdev_init/fini()
drm/sun4i: Use drm_fb_cma_fbdev_init/fini()
drm/stm: Use drm_fb_cma_fbdev_init/fini()
drm/sti: Use drm_fb_cma_fbdev_init/fini()
drm/pl111: Use drm_fb_cma_fbdev_init/fini()
drm/imx: Use drm_fb_cma_fbdev_init/fini()
drm/atmel-hlcdc: Use drm_fb_cma_fbdev_init/fini()
drm/cma-helper: Add drm_fb_cma_fbdev_init/fini()
drm/gem-fb-helper: drm_gem_fbdev_fb_create() make funcs optional
drm/tegra: Use drm_fb_helper_lastclose() and _poll_changed()
drm/rockchip: Use drm_fb_helper_lastclose() and _poll_changed()
drm/omap: Use drm_fb_helper_lastclose() and _poll_changed()
...
include ttm_bo_move_memcpy and ttm_bo_move_ttm
Signed-off-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
allow_reserved_eviction: Allow eviction of reserved BOs
resv: Reservation object to allow reserved evictions with
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CFL was missing from intel_early_ids[]. The PCI ID needs to be there to
allow the memory region to be stolen, otherwise we could have RAM being
arbitrarily overwritten if for example we keep using the UEFI framebuffer,
depending on how BIOS has set up the e820 map.
Fixes: b056f8f3d6 ("drm/i915/cfl: Add Coffee Lake PCI IDs for S Skus.")
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Cc: <stable@vger.kernel.org> # v4.13+ 0890540e21 drm/i915: add GT number to intel_device_info
Cc: <stable@vger.kernel.org> # v4.13+ 41693fd523 drm/i915/kbl: Change a KBL pci id to GT2 from GT1.5
Cc: <stable@vger.kernel.org> # v4.13+
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213200425.2954-1-lucas.demarchi@intel.com
We don't want people to accidentally stumble over there.
Also rename the plane helpers to legacy plane helpers. After Ville's
patch to make the clipping helper atomic and move it to
drm_atomic_helper.c there's nothing left in there that should be
useful for modern drivers.
v2: Laurent had a few questions around how state is added to
drm_atomic_state, tried to clarify that. And spotted another sentence
where the docs suggested subclassing.
v3: Small polish (Alex).
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171214203054.20141-6-daniel.vetter@ffwll.ch
DK put some nice docs into the commit introducing driver private
state, but in the git history alone it'll be lost.
Also, since Ville remove the void* usage it's a good opportunity to
give the driver private stuff some tlc on the doc front.
Finally try to explain why the "let's just subclass drm_atomic_state"
approach wasn't the greatest, and annotate all those functions as
deprecated in favour of more standardized driver private states. Also
note where we could/should extend driver private states going forward
(atm neither locking nor synchronization is handled in core/helpers,
which isn't really all that great).
v2: Spelling and phrasing improvements (Alex, DK).
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171214203054.20141-5-daniel.vetter@ffwll.ch
Complete a few missing bits, fix up the existing xcross-references and
add a bunch more.
v2: Fix typos (Alex).
Cc: Dave Airlie <airlied@gmail.com> via lists.freedesktop.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171214203054.20141-4-daniel.vetter@ffwll.ch
It thinks we want to document the __printf(2,0) annotion. Not sure we
want to teach it about all possible gcc-only flags, hence why I opted
for the cheap trick of just moving it ahead of the kerneldoc.
This is only a problem for static inline functions, since for
non-inline function the kerneldoc is in the .c file, but the special
annotations are all in the header.
Cc'ing kernel-doc maintainers as fyi.
Cc: linux-doc@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171214203054.20141-3-daniel.vetter@ffwll.ch
PROBE_DEFER also uses system_wq to reprobe drivers, which means when
that again fails, and we try to flush the overall system_wq (to get
all the delayed connectore cleanup work_struct completed), we
deadlock.
Fix this by using just a single cleanup work, so that we can only
flush that one and don't block on anything else. That means a free
list plus locking, a standard pattern.
v2:
- Correctly free connectors only on last ref. Oops (Chris).
- use llist_head/node (Chris).
v3
- Add init_llist_head (Chris).
Fixes: a703c55004 ("drm: safely free connectors from connector_iter")
Fixes: 613051dac4 ("drm: locking&new iterators for connector_list")
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: <stable@vger.kernel.org> # v4.11+: 613051dac4 ("drm: locking&new iterators for connector_list"
Cc: <stable@vger.kernel.org> # v4.11+
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Javier Martinez Canillas <javier@dowhile0.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Guillaume Tucker <guillaume.tucker@collabora.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Matt Hart <matthew.hart@linaro.org>
Cc: Thierry Escande <thierry.escande@collabora.co.uk>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213124936.17914-1-daniel.vetter@ffwll.ch
There are a set of values in the drm_display_info structure for each
connector which hold information derived from EDID. These are computed
in drm_add_display_info. Before this patch, that was only called in
drm_add_edid_modes. This meant that they were only set when EDID was
present and never reset when EDID was not, as happened when the
display was disconnected.
One of these fields, non_desktop, is used from
drm_mode_connector_update_edid_property, the function responsible for
assigning the new edid value to the application-visible property.
Various drivers call these two functions (drm_add_edid_modes and
drm_mode_connector_update_edid_property) in different orders. This
means that even when EDID is present, the drm_display_info fields may
not have been computed at the time that
drm_mode_connector_update_edid_property used the non_desktop value to
set the non_desktop property.
I've added a public function (drm_reset_display_info) that resets the
drm_display_info field values to default values and then made the
drm_add_display_info function public. These two functions are now
called directly from drm_mode_connector_update_edid_property so that
the drm_display_info fields are always computed from the current EDID
information before being used in that function.
This means that the drm_display_info values are often computed twice,
once when the EDID property it set and a second time when EDID is used
to compute modes for the device. The alternative would be to uniformly
ensure that the values were computed once before being used, which
would require that all drivers reliably invoke the two paths in the
same order. The computation is inexpensive enough that it seems more
maintainable in the long term to simply compute them in both paths.
The API to drm_add_display_info has been changed so that it no longer
takes the set of edid-based quirks as a parameter. Rather, it now
computes those quirks itself and returns them for further use by
drm_add_edid_modes.
This patch also includes a number of 'const' additions caused by
drm_mode_connector_update_edid_property taking a 'const struct edid *'
parameter and wanting to pass that along to drm_add_display_info.
v2: after review by Daniel Vetter <daniel.vetter@ffwll.ch>
Removed EXPORT_SYMBOL_GPL for drm_reset_display_info and
drm_add_display_info.
Added FIXME in drm_mode_connector_update_edid_property about
potentially merging that with drm_add_edid_modes to avoid
the need for two driver calls.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213084427.31199-1-keithp@keithp.com
(danvet: cherry picked from commit 12a889bf4bca ("drm: rework delayed
connector cleanup in connector_iter") from drm-misc-next since
functional conflict with changes in -next and we need to make sure
both have the right version and nothing gets lost.)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There are a set of values in the drm_display_info structure for each
connector which hold information derived from EDID. These are computed
in drm_add_display_info. Before this patch, that was only called in
drm_add_edid_modes. This meant that they were only set when EDID was
present and never reset when EDID was not, as happened when the
display was disconnected.
One of these fields, non_desktop, is used from
drm_mode_connector_update_edid_property, the function responsible for
assigning the new edid value to the application-visible property.
Various drivers call these two functions (drm_add_edid_modes and
drm_mode_connector_update_edid_property) in different orders. This
means that even when EDID is present, the drm_display_info fields may
not have been computed at the time that
drm_mode_connector_update_edid_property used the non_desktop value to
set the non_desktop property.
I've added a public function (drm_reset_display_info) that resets the
drm_display_info field values to default values and then made the
drm_add_display_info function public. These two functions are now
called directly from drm_mode_connector_update_edid_property so that
the drm_display_info fields are always computed from the current EDID
information before being used in that function.
This means that the drm_display_info values are often computed twice,
once when the EDID property it set and a second time when EDID is used
to compute modes for the device. The alternative would be to uniformly
ensure that the values were computed once before being used, which
would require that all drivers reliably invoke the two paths in the
same order. The computation is inexpensive enough that it seems more
maintainable in the long term to simply compute them in both paths.
The API to drm_add_display_info has been changed so that it no longer
takes the set of edid-based quirks as a parameter. Rather, it now
computes those quirks itself and returns them for further use by
drm_add_edid_modes.
This patch also includes a number of 'const' additions caused by
drm_mode_connector_update_edid_property taking a 'const struct edid *'
parameter and wanting to pass that along to drm_add_display_info.
v2: after review by Daniel Vetter <daniel.vetter@ffwll.ch>
Removed EXPORT_SYMBOL_GPL for drm_reset_display_info and
drm_add_display_info.
Added FIXME in drm_mode_connector_update_edid_property about
potentially merging that with drm_add_edid_modes to avoid
the need for two driver calls.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213084427.31199-1-keithp@keithp.com
Keeps things consistent now that we make use of struct resource. This
should keep us covered in case we ever get huge amounts of stolen
memory.
v2: bunch of missing conversions (Chris)
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-10-matthew.auld@intel.com
Now that we are using struct resource to track the stolen region, it is
more convenient if we track dsm in a resource as well.
v2: check range_overflow when writing to 32b registers (Chris)
pepper in some comments (Chris)
v3: refit i915_stolen_to_dma()
v4: kill ggtt->stolen_size
v5: some more polish
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-6-matthew.auld@intel.com
We duplicate the stolen discovery code in early-quirks and in i915,
however if we just export the region as a resource from early-quirks we
can nuke the duplication.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-3-matthew.auld@intel.com
Use drm_fb_cma_fbdev_init_with_funcs() and drm_fb_cma_fbdev_fini() which
relies on the fact that drm_device holds a pointer to the drm_fb_helper
structure. This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.
Remove todo entry.
Cc: David Lechner <david@lechnology.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: David Lechner <david@lechnology.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: David Lechner <david@lechnolgy.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208193743.34450-11-noralf@tronnes.org
Add functions drm_fb_cma_fbdev_init(), drm_fb_cma_fbdev_fini() and
drm_fb_cma_fbdev_init_with_funcs(). These functions relies on the fact
that the drm_fb_helper struct is stored in dev->drm_fb_helper_private
so drivers don't need to store it.
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115142001.45358-3-noralf@tronnes.org
- Add "panel orientation" property to DRM to indicate orientation of the
panel vs the device's casing (Hans de Goede)
Core Changes:
- misc doc and bug fixes
Driver Changes:
- sun4i: Many improvements to the DE driver like multi-plane support and
YUV formats (Jernej Skrabec)
-----BEGIN PGP SIGNATURE-----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=/Aku
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2017-12-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
UAPI Changes:
- Add "panel orientation" property to DRM to indicate orientation of the
panel vs the device's casing (Hans de Goede)
Core Changes:
- misc doc and bug fixes
Driver Changes:
- sun4i: Many improvements to the DE driver like multi-plane support and
YUV formats (Jernej Skrabec)
* tag 'drm-misc-next-2017-12-07' of git://anongit.freedesktop.org/drm/drm-misc: (50 commits)
drm/sun4i: Fix uninitialized variables in vi layer
drm/fb-helper: Fix potential NULL pointer dereference
gpu: drm: stm: Adopt SPDX identifiers
gpu: drm: sti: Adopt SPDX identifiers
drm/fsl-dcu: Use drm_mode_config_helper_suspend/resume()
drm/sun4i: Wire in DE2 YUV support
drm/sun4i: Expand DE2 scaler lib with YUV support
drm/sun4i: Add DE2 definitions for YUV formats
drm/sun4i: Add DE2 CSC library
drm/sun4i: Add CCSC property to DE2 configuration
drm/sun4i: Add support for HW scaling to DE2
drm/sun4i: Add scaler configuration to DE2 mixers
drm/sun4i: Add support for DE2 VI planes
drm/sun4i: Reorganize UI layer code in DE2
drm/sun4i: Add support for all HW supported DE2 RGB formats
drm/sun4i: Add multi plane support to DE2 driver
drm/sun4i: Move interlace related code in DE2
drm/sun4i: Move channel size related code in DE2
drm/sun4i: Move line width setting in DE2
drm/sun4i: Use values calculated by atomic check
...
This is the only part of the scheduler which must not be called from
different drivers. Move it to module init/exit so it is done a single
time when loading the scheduler.
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This moves and renames the AMDGPU scheduler to a common location in DRM
in order to facilitate re-use by other drivers. This is mostly a straight
forward rename with no code changes.
One notable exception is the function to_drm_sched_fence(), which is no
longer a inline header function to avoid the need to export the
drm_sched_fence_ops_scheduled and drm_sched_fence_ops_finished structures.
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add some statistics how many bytes we have moved.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of passing the parameters manually.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of specifying interruptible and no_wait_gpu manually.
v2: rebase
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of specifying if sleeping should be interruptible.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Give moving a BO into place an operation context to work with.
v2: rebased
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not used any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Extern is the default for function declerations anyway.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Extern is the default for function declerations anyway and this
solves a bunch of 80char per line issues.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just another alias for ttm_bo_unreserve.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Consistently use the reservation object wrappers instead of accessing
the ww_mutex directly.
Additional to that use the reservation object wrappers directly instead of
calling __ttm_bo_reserve with fixed parameters.
v2: fix typo
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of having a confusing wrapper or call the underlying ww_mutex
function directly.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In
commit 613051dac4
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Wed Dec 14 00:08:06 2016 +0100
drm: locking&new iterators for connector_list
we've went to extreme lengths to make sure connector iterations works
in any context, without introducing any additional locking context.
This worked, except for a small fumble in the implementation:
When we actually race with a concurrent connector unplug event, and
our temporary connector reference turns out to be the final one, then
everything breaks: We call the connector release function from
whatever context we happen to be in, which can be an irq/atomic
context. And connector freeing grabs all kinds of locks and stuff.
Fix this by creating a specially safe put function for connetor_iter,
which (in this rare case) punts the cleanup to a worker.
Reported-by: Ben Widawsky <ben@bwidawsk.net>
Cc: Ben Widawsky <ben@bwidawsk.net>
Fixes: 613051dac4 ("drm: locking&new iterators for connector_list")
Cc: Dave Airlie <airlied@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: <stable@vger.kernel.org> # v4.11+
Reviewed-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171204204818.24745-1-daniel.vetter@ffwll.ch
Apply the "panel orientation" drm connector prop to the primary plane so
that fbcon and fbdev using userspace programs display the right way up.
Changes in v3:
-Use a rotation member in struct drm_fb_helper_crtc and set that from
drm_setup_crtcs instead of looping over all crtc's to find the right one
later
-Since we now no longer look at rotation quirks directly in the fbcon
code, set fb_info.fbcon_rotate_hint when the panel is not mounted upright
and we cannot use hardware rotation
Changes in v4:
-Make drm_fb_helper_init() init drm_fb_helper_crtc.rotation to
DRM_MODE_ROTATE_0 for all crtcs, so that we do not end up setting the
plane_state's rotation to an invalid value for disabled crtcs
(caught by Fi.CI)
Changes in v5:
-Only use hardware (crtc primary plane) rotation for DRM_ROTATE_180,
90 / 270 degree rotation requires special handling which we lack atm
-Add a TODO comment for 90 / 270 degree hardware rotation
-Add some comments to better document the default case when mapping
sw_rotations to fbcon_rotate_hints
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=94894
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171125193553.23986-5-hdegoede@redhat.com
On some devices the LCD panel is mounted in the casing in such a way that
the up/top side of the panel does not match with the top side of the
device (e.g. it is mounted upside-down).
This commit adds the necessary infra for lcd-panel drm_connector-s to
have a "panel orientation" property to communicate how the panel is
orientated vs the casing.
Userspace can use this property to check for non-normal orientation and
then adjust the displayed image accordingly by rotating it to compensate.
Changes in v2:
-Store panel_orientation in drm_display_info, so that drm_fb_helper.c can
access it easily
-Have a single drm_connector_init_panel_orientation_property rather then
create and attach functions. The caller is expected to set
drm_display_info.panel_orientation before calling this, then this will
check for platform specific quirks overriding the panel_orientation and if
the panel_orientation is set after this then it will attach the property.
Changes in v6:
-Use an enum (with kerneldoc) rather then #defines for
DRM_MODE_PANEL_ORIENTATION_*
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171125193553.23986-4-hdegoede@redhat.com
Some x86 clamshell design devices use portrait tablet screens and a display
engine which cannot rotate in hardware, so the firmware just leaves things
as is and we cannot figure out that the display is oriented non upright
from the hardware.
So at least on x86, we need a quirk table for this. This commit adds a DMI
based quirk table which is initially populated with 5 such devices: Asus
T100HA, GPD Pocket, GPD win, I.T.Works TW891 and the VIOS LTH17.
This quirk table will be used by the drm code to let userspace know that
the display is not mounted upright inside the devices case through a new
panel orientation drm-connector property, as well as to tell fbcon to
rotate the console so that it shows the right way up.
Changes in v5:
-Add a kernel-doc comment documenting drm_get_panel_orientation_quirk()
-Remove board_* matches from the dmi-matches for the VIOS LTH17 laptop,
keeping only the (identical) sys_vendor and product_name matches.
This is necessary because an older version of the bios has
board_vendor set to VOIS instead of VIOS
Changes in v6:
-Add reference to added kernel-docs in Documentation/gpu/drm-kms-helpers.rst
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171125193553.23986-3-hdegoede@redhat.com
We need to pull 66660d4cf2 (drm: add connector info/property for
non-desktop displays [v2]) into drm-misc-next to continue the development
of the display rotation series.
Effectively this also pulls 4.15-r2 into drm-misc-next.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Cross-subsystem Changes:
- device tree doc for the Mitsubishi AA070MC01 and Tianma TM070RVHG71
panels (Lukasz Majewski) and for a 2nd endpoint on stm32 (Philippe Cornu)
Core Changes:
The most important changes are:
- Add drm_driver .last_close and .output_poll_changed helpers to reduce
fbdev emulation footprint in drivers (Noralf)
- Fix plane clipping in core and for vmwgfx (Ville)
Then we have a bunch of of improvement for print and debug such as the
addition of a framebuffer debugfs file. ELD connector, HDMI and
improvements. And a bunch of misc improvements, clean ups and style
changes and doc updates
[airlied: drop eld bits from amdgpu_dm]
Driver Changes:
- sii8620: filter unsupported modes and add DVI mode support (Maciej Purski)
- rockchip: analogix_dp: Remove unnecessary init code (Jeffy Chen)
- virtio, cirrus: add fb create_handle support to enable screenshots(Lepton Wu)
- virtio: replace reference/unreference with get/put (Aastha Gupta)
- vc4, gma500: Convert timers to use timer_setup() (Kees Cook)
- vc4: Reject HDMI modes with too high of clocks (Eric)
- vc4: Add support for more pixel formats (Dave Stevenson)
- stm: dsi: Rename driver name to "stm32-display-dsi" (Philippe Cornu)
- stm: ltdc: add a 2nd endpoint (Philippe Cornu)
- via: use monotonic time for VIA_WAIT_IRQ (Arnd Bergmann)
* tag 'drm-misc-next-2017-11-30' of git://anongit.freedesktop.org/drm/drm-misc: (96 commits)
drm/bridge: tc358767: add copyright lines
MAINTAINERS: change maintainer for Rockchip drm drivers
drm/vblank: Fix vblank timestamp debugs
drm/via: use monotonic time for VIA_WAIT_IRQ
dma-buf: Fix ifnullfree.cocci warnings
drm/printer: Add drm_vprintf()
drm/edid: Allow HDMI infoframe without VIC or S3D
video/hdmi: Allow "empty" HDMI infoframes
dma-buf/fence: Fix lock inversion within dma-fence-array
drm/sti: Handle return value of platform_get_irq_byname
drm/vc4: Add support for NV21 and NV61.
drm/vc4: Use .pixel_order instead of custom .flip_cbcr
drm/vc4: Add support for DRM_FORMAT_RGB888 and DRM_FORMAT_BGR888
drm: Move drm_plane_helper_check_state() into drm_atomic_helper.c
drm: Check crtc_state->enable rather than crtc->enabled in drm_plane_helper_check_state()
drm/vmwgfx: Try to fix plane clipping
drm/vmwgfx: Use drm_plane_helper_check_state()
drm/vmwgfx: Remove bogus crtc coords vs fb size check
gpu: gma500: remove unneeded DRIVER_LICENSE #define
drm: don't link DP aux i2c adapter to the hardware device node
...
Fixes for 4.15. Highlights:
- DC fixes for S3, gamma, audio, pageflipping, etc.
- fix a regression in radeon from kfd removal
- fix a ttm regression with swiotlb disabled
- misc other fixes
* 'drm-fixes-4.15' of git://people.freedesktop.org/~agd5f/linux: (36 commits)
drm/radeon: remove init of CIK VMIDs 8-16 for amdkfd
drm/ttm: fix populate_and_map() functions once more
drm/amd/display: USB-C / thunderbolt dock specific workaround
drm/amd/display: Switch to drm_atomic_helper_wait_for_flip_done
drm/amd/display: fix gamma setting
drm/amd/display: Do not put drm_atomic_state on resume
drm/amd/display: Fix couple more inconsistent NULL checks in dc_resource
drm/amd/display: Fix potential NULL and mem leak in create_links
drm/amd/display: Fix hubp check in set_cursor_position
drm/amd/display: Fix use before NULL check in validate_timing
drm/amd/display: Bunch of smatch error and warning fixes in DC
drm/amd/display: Fix amdgpu_dm bugs found by smatch
drm/amd/display: try to find matching audio inst for enc inst first
drm/amd/display: fix seq issue: turn on clock before programming afmt.
drm/amd/display: fix memory leaks on error exit return
drm/amd/display: check plane state before validating fbc
drm/amd/display: Do DC mode-change check when adding CRTCs
drm/amd/display: Revert noisy assert messages
drm/amd/display: fix split viewport rounding error
drm/amd/display: Check aux channel before MST resume
...
Add drm_mode_config_helper_suspend/resume() which takes care of
atomic modeset suspend/resume for simple use cases.
The suspend state is stored in struct drm_mode_config.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171106191812.38927-3-noralf@tronnes.org
This reverts "drm/ttm: Fix configuration error around populate_and_map()
functions".
This fix has gone into the wrong direction. Those helpers should be
available even when neither CONFIG_INTEL_IOMMU nor CONFIG_SWIOTLB are
set.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----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=3TmE
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.15-part2-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
- TTM regression fix for some virt gpus (bochs vga)
- a few i915 stable fixes
- one vc4 fix
- one uapi fix
* tag 'drm-for-v4.15-part2-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/ttm: don't attempt to use hugepages if dma32 requested (v2)
drm/vblank: Pass crtc_id to page_flip_ioctl.
drm/i915: Fix init_clock_gating for resume
drm/i915: Mark the userptr invalidate workqueue as WQ_MEM_RECLAIM
drm/i915: Clear breadcrumb node when cancelling signaling
drm/i915/gvt: ensure -ve return value is handled correctly
drm/i915: Re-register PMIC bus access notifier on runtime resume
drm/i915: Fix false-positive assert_rpm_wakelock_held in i915_pmic_bus_access_notifier v2
drm/edid: Don't send non-zero YQ in AVI infoframe for HDMI 1.x sinks
drm/vc4: Account for interrupts in flight
-----BEGIN PGP SIGNATURE-----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=P4O6
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.15-part2' of git://people.freedesktop.org/~airlied/linux
Pull more drm updates from Dave Airlie:
"Fixes/cleanups for rc1, non-desktop flags for VR
- remove the MSM dt-bindings file Rob managed to push in the previous
pull.
- add a property/edid quirk to denote HMD devices, I had these
hanging around for a few weeks and Keith had done some work on
them, they are fairly self contained and small, and only affect
people using HTC Vive VR headsets so far.
- amdgpu, tegra, tilcdc, fsl fixes
- some imx-drm cleanups I missed, these seemed pretty small, and no
reason to hold off.
I have one TTM regression fix (fixes bochs-vga in qemu) sitting
locally awaiting review I'll probably send that in a separate pull
request tomorrow"
* tag 'drm-for-v4.15-part2' of git://people.freedesktop.org/~airlied/linux: (33 commits)
dt-bindings: remove file that was added accidentally
drm/edid: quirk HTC vive headset as non-desktop. [v2]
drm/fb: add support for not enabling fbcon on non-desktop displays [v2]
drm: add connector info/property for non-desktop displays [v2]
drm/amdgpu: fix rmmod KCQ disable failed error
drm/amdgpu: fix kernel hang when starting VNC server
drm/amdgpu: don't skip attributes when powerplay is enabled
drm/amd/pp: fix typecast error in powerplay.
drm/tilcdc: Remove obsolete "ti,tilcdc,slave" dts binding support
drm/tegra: sor: Reimplement pad clock
Revert "drm/radeon: dont switch vt on suspend"
drm/amd/amdgpu: fix over-bound accessing in amdgpu_cs_wait_any_fence
drm/amd/powerplay: fix unfreeze level smc message for smu7
drm/amdgpu:fix memleak
drm/amdgpu:fix memleak in takedown
drm/amd/pp: fix dpm randomly failed on Vega10
drm/amdgpu: set f_mapping on exported DMA-bufs
drm/amdgpu: Properly allocate VM invalidate eng v2
drm/fsl-dcu: enable IRQ before drm_atomic_helper_resume()
drm/fsl-dcu: avoid disabling pixel clock twice on suspend
...
4.15 merge window fixes 1
* tag 'drm-misc-fixes-2017-11-20' of git://anongit.freedesktop.org/drm/drm-misc:
drm/edid: Don't send non-zero YQ in AVI infoframe for HDMI 1.x sinks
drm/vc4: Account for interrupts in flight
Simple va_args equivalent to the existing drm_printf() for use with the
drm_printer.
v2: Fixup kerneldoc to match final parameter names.
v3: Turn it into a kerneldoc comment
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171123084051.30203-1-chris@chris-wilson.co.uk
This adds the infrastructure needed to quirk displays
using edid and to mark them a non-desktop.
A non-desktop display is one which shouldn't normally be included
as a part of a desktop environment.
This is meant to cover head mounted devices like HTC Vive.
v2: Change description from non-standard to non-desktop, add docs
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
fixup docs
Appedix F of HDMI 2.0 says that some HDMI sink may fail to switch from
3D to 2D mode in a timely fashion if the source simply stops sending the
HDMI infoframe. The suggested workaround is to keep sending the
infoframe even when strictly not necessary (ie. no VIC and no S3D).
HDMI 1.4 does allow for this behaviour, stating that sending the
infoframe is optional in this case.
The infoframe was first specified in HDMI 1.4, so in theory sinks
predating that may not appreciate us sending an uknown infoframe
their way. To avoid regressions let's try to determine if the sink
supports the infoframe or not. Unfortunately there's no direct way
to do that, so instead we'll just check if we managed to parse any
HDMI 1.4 4k or stereo modes from the EDID, and if so we assume the
sink will accept the infoframe. Also if the EDID contains the HDMI
2.0 HDMI Forum VSDB we can assume the sink is prepared to receive
the infoframe.
v2: Fix getting has_hdmi_infoframe from display_info
Always fail constructing the infoframe if the display
possibly can't handle it
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171113170427.4150-3-ville.syrjala@linux.intel.com
Bake in the conflict between the drm_print.h extraction and the
addition of DRM_DEBUG_LEASES since we lost it a few too many times.
Also fix a new use of drm_plane_helper_check_state in msm to follow
Ville's conversion in
commit a01cb8ba3f
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Wed Nov 1 22:16:19 2017 +0200
drm: Move drm_plane_helper_check_state() into drm_atomic_helper.c
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm_plane_helper_check_update() isn't a transitional helper, so let's
rename it to drm_atomic_helper_check_plane_state() and move it into
drm_atomic_helper.c.
v2: Fix the WARNs about plane_state->crtc matching crtc_state->crtc
Cc: Daniel Vetter <daniel@ffwll.ch>
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171101201619.6175-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm_plane_helper_check_state() is supposed to do things the atomic way,
so it should not be inspecting crtc->enabled. Rather we should be
looking at crtc_state->enable.
We have a slight complication due to drm_plane_helper_check_update()
reusing drm_plane_helper_check_state() for non-atomic drivers. Thus
we'll have to pass the crtc_state in manally and construct a fake
crtc_state in drm_plane_helper_check_update().
v2: Fix the WARNs about plane_state->crtc matching crtc_state->crtc
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171101201558.6059-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-----BEGIN PGP SIGNATURE-----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=0JS4
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.15-amd-dc' of git://people.freedesktop.org/~airlied/linux
Pull amdgpu DC display code for Vega from Dave Airlie:
"This is the pull request for the AMD DC (display code) layer which is
a requirement to program the display engines on the new Vega and Raven
based GPUs. It also contains support for all amdgpu supported GPUs
(CIK, VI, Polaris), which has to be enabled. It is also a kms atomic
modesetting compatible driver (unlike the current in-tree display
code).
I've kept it separate from drm-next because it may have some things
that cause you to reject it.
Background story:
AMD have an internal team creating a shared OS codebase for display at
hw bring up time using information from their hardware teams. This
process doesn't lead to the most Linux friendly/looking code but we
have worked together on cleaning a lot of it up and dealing with
sparse/smatch/checkpatch, and having their team internally adhere to
Linux coding standards.
This tree is a complete history rebased since they started opening it,
we decided not to squash it down as the history may have some value.
Some of the commits therefore might not reach kernel standards, and we
are steadily training people in AMD to better write commit msgs.
There is a major bunch of generated bandwidth calculation and
verification code that comes from their hardware team. On Vega and
before this is float calculations, on Raven (DCN10) this is double
based. They do the required things to do FP in the kernel, and I could
understand this might raise some issues. Rewriting the bandwidth would
be a major undertaken in reverification, it's non-trivial to work out
if a display can handle the complete set of mode information thrown at
it.
Future story:
There is a TODO list with this, and it address most of the remaining
things that would be nice to refine/remove. The DCN10 code is still
under development internally and they push out a lot of patches quite
regularly and are supporting this code base with their display team. I
think we've reached the point where keeping it out of tree is going to
motivate distributions to start carrying the code, so I'd prefer we
get it in tree. I think this code is slightly better than STAGING
quality but not massively so, I'd really like to see that float/double
magic gone and fixed point used, but AMD don't seem to think the
accuracy and revalidation of the code is worth the effort"
* tag 'drm-for-v4.15-amd-dc' of git://people.freedesktop.org/~airlied/linux: (1110 commits)
drm/amd/display: fix MST link training fail division by 0
drm/amd/display: Fix formatting for null pointer dereference fix
drm/amd/display: Remove dangling planes on dc commit state
drm/amd/display: add flip_immediate to commit update for stream
drm/amd/display: Miss register MST encoder cbs
drm/amd/display: Fix warnings on S3 resume
drm/amd/display: use num_timing_generator instead of pipe_count
drm/amd/display: use configurable FBC option in dm
drm/amd/display: fix AZ clock not enabled before program AZ endpoint
amdgpu/dm: Don't use DRM_ERROR in amdgpu_dm_atomic_check
amd/display: Fix potential null dereference in dce_calcs.c
amdgpu/dm: Remove unused forward declaration
drm/amdgpu: Remove unused dc_stream from amdgpu_crtc
amdgpu/dc: Fix double unlock in amdgpu_dm_commit_planes
amdgpu/dc: Fix missing null checks in amdgpu_dm.c
amdgpu/dc: Fix potential null dereferences in amdgpu_dm.c
amdgpu/dc: fix more indentation warnings
amdgpu/dc: handle allocation failures in dc_commit_planes_to_stream.
amdgpu/dc: fix indentation warning from smatch.
amdgpu/dc: fix non-ansi function decls.
...
-----BEGIN PGP SIGNATURE-----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=xVV2
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
"This is the main drm pull request for v4.15.
Core:
- Atomic object lifetime fixes
- Atomic iterator improvements
- Sparse/smatch fixes
- Legacy kms ioctls to be interruptible
- EDID override improvements
- fb/gem helper cleanups
- Simple outreachy patches
- Documentation improvements
- Fix dma-buf rcu races
- DRM mode object leasing for improving VR use cases.
- vgaarb improvements for non-x86 platforms.
New driver:
- tve200: Faraday Technology TVE200 block.
This "TV Encoder" encodes a ITU-T BT.656 stream and can be found in
the StorLink SL3516 (later Cortina Systems CS3516) as well as the
Grain Media GM8180.
New bridges:
- SiI9234 support
New panels:
- S6E63J0X03, OTM8009A, Seiko 43WVF1G, 7" rpi touch panel, Toshiba
LT089AC19000, Innolux AT043TN24
i915:
- Remove Coffeelake from alpha support
- Cannonlake workarounds
- Infoframe refactoring for DisplayPort
- VBT updates
- DisplayPort vswing/emph/buffer translation refactoring
- CCS fixes
- Restore GPU clock boost on missed vblanks
- Scatter list updates for userptr allocations
- Gen9+ transition watermarks
- Display IPC (Isochronous Priority Control)
- Private PAT management
- GVT: improved error handling and pci config sanitizing
- Execlist refactoring
- Transparent Huge Page support
- User defined priorities support
- HuC/GuC firmware refactoring
- DP MST fixes
- eDP power sequencing fixes
- Use RCU instead of stop_machine
- PSR state tracking support
- Eviction fixes
- BDW DP aux channel timeout fixes
- LSPCON fixes
- Cannonlake PLL fixes
amdgpu:
- Per VM BO support
- Powerplay cleanups
- CI powerplay support
- PASID mgr for kfd
- SR-IOV fixes
- initial GPU reset for vega10
- Prime mmap support
- TTM updates
- Clock query interface for Raven
- Fence to handle ioctl
- UVD encode ring support on Polaris
- Transparent huge page DMA support
- Compute LRU pipe tweaks
- BO flag to allow buffers to opt out of implicit sync
- CTX priority setting API
- VRAM lost infrastructure plumbing
qxl:
- fix flicker since atomic rework
amdkfd:
- Further improvements from internal AMD tree
- Usermode events
- Drop radeon support
nouveau:
- Pascal temperature sensor support
- Improved BAR2 handling
- MMU rework to support Pascal MMU
exynos:
- Improved HDMI/mixer support
- HDMI audio interface support
tegra:
- Prep work for tegra186
- Cleanup/fixes
msm:
- Preemption support for a5xx
- Display fixes for 8x96 (snapdragon 820)
- Async cursor plane fixes
- FW loading rework
- GPU debugging improvements
vc4:
- Prep for DSI panels
- fix T-format tiling scanout
- New madvise ioctl
Rockchip:
- LVDS support
omapdrm:
- omap4 HDMI CEC support
etnaviv:
- GPU performance counters groundwork
sun4i:
- refactor driver load + TCON backend
- HDMI improvements
- A31 support
- Misc fixes
udl:
- Probe/EDID read fixes.
tilcdc:
- Misc fixes.
pl111:
- Support more variants
adv7511:
- Improve EDID handling.
- HDMI CEC support
sii8620:
- Add remote control support"
* tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux: (1480 commits)
drm/rockchip: analogix_dp: Use mutex rather than spinlock
drm/mode_object: fix documentation for object lookups.
drm/i915: Reorder context-close to avoid calling i915_vma_close() under RCU
drm/i915: Move init_clock_gating() back to where it was
drm/i915: Prune the reservation shared fence array
drm/i915: Idle the GPU before shinking everything
drm/i915: Lock llist_del_first() vs llist_del_all()
drm/i915: Calculate ironlake intermediate watermarks correctly, v2.
drm/i915: Disable lazy PPGTT page table optimization for vGPU
drm/i915/execlists: Remove the priority "optimisation"
drm/i915: Filter out spurious execlists context-switch interrupts
drm/amdgpu: use irq-safe lock for kiq->ring_lock
drm/amdgpu: bypass lru touch for KIQ ring submission
drm/amdgpu: Potential uninitialized variable in amdgpu_vm_update_directories()
drm/amdgpu: potential uninitialized variable in amdgpu_vce_ring_parse_cs()
drm/amd/powerplay: initialize a variable before using it
drm/amd/powerplay: suppress KASAN out of bounds warning in vega10_populate_all_memory_levels
drm/amd/amdgpu: fix evicted VRAM bo adjudgement condition
drm/vblank: Tune drm_crtc_accurate_vblank_count() WARN down to a debug
drm/rockchip: add CONFIG_OF dependency for lvds
...
drm_gem_cma_prime_import_sg_table() will fail if the number of entries
in the sg_table > 1. However, you can have a device that uses an IOMMU
engine and can map a discontiguous buffer with multiple entries that
have consecutive sg_dma_addresses, effectively making it contiguous.
Allow for that scenario by testing the entries in the sg_table for
contiguous coverage.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110133310.1225-1-Liviu.Dudau@arm.com
Apparently some sinks look at the YQ bits even when receiving RGB,
and they get somehow confused when they see a non-zero YQ value.
So we can't just blindly follow CEA-861-F and set YQ to match the
RGB range.
Unfortunately there is no good way to tell whether the sink
designer claims to have read CEA-861-F. The CEA extension block
revision number has generally been stuck at 3 since forever,
and even a very recently manufactured sink might be based on
an old design so the manufacturing date doesn't seem like
something we can use. In lieu of better information let's
follow CEA-861-F only for HDMI 2.0 sinks, since HDMI 2.0 is
based on CEA-861-F. For HDMI 1.x sinks we'll always set YQ=0.
The alternative would of course be to always set YQ=0. And if
we ever encounter a HDMI 2.0+ sink with this bug that's what
we'll probably have to do.
Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Neil Kownacki <njkkow@gmail.com>
Reported-by: Neil Kownacki <njkkow@gmail.com>
Tested-by: Neil Kownacki <njkkow@gmail.com>
Fixes: fcc8a22cc9 ("drm/edid: Set YQ bits in the AVI infoframe according to CEA-861-F")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101639
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171108152504.12596-1-ville.syrjala@linux.intel.com
Acked-by: Eric Anholt <eric@anholt.net>
Add the missing kerneldoc for modifiers and modifier_count.
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171114191021.15591-3-ville.syrjala@linux.intel.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This is a shared tree between drm and audio for some amd bits.
* 'linus-4.14-rc4-acp-prereq' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu Moving amdgpu asic types to a separate file
ASoC: AMD: Added asic_type as ACP DMA driver platform data
drm/amd/amdgpu: Added asic_type as ACP DMA driver platform data
There is a new core debugfs file that prints fb/gem info:
<debugfs>/dri/<n>/framebuffer
Use drm_gem_cma_print_info() to provide info to that output instead
of using drm_fb_cma_debugfs_show().
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-12-noralf@tronnes.org
This allows the argument to be a const.
The other option was to keep it an inline function and make the argument
a const:
static inline struct drm_gem_cma_object *
to_drm_gem_cma_obj(const struct drm_gem_object *gem_obj)
{
return container_of(gem_obj, struct drm_gem_cma_object, base);
}
This will happily return a non-const pointer to the drm_gem_cma_object
based on a const pointer to the contained drm_gem_object, thus creating
const-safety problems.
There was an attempt to fix the problem in the container_of() macro
itself (see https://lkml.org/lkml/2017/5/19/381) but the patch seems to
have fallen through the cracks. It would require turning this inline
function into a macro.
By making this a macro now, we will benefit from a possible future
enhancement of container_of(). We don't loose type checking by doing
this, container_of() takes care of that.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-7-noralf@tronnes.org
Add debugfs file that dumps info about the framebuffers and its planes.
Also dump info about any connected gem object(s).
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-5-noralf@tronnes.org
Add drm_printf_indent() that adds tab indentation according to argument.
Indentation overflow is marked with an X.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171107191348.17555-4-noralf@tronnes.org
Gerd Hoffmann