Commit Graph

3136 Commits

Author SHA1 Message Date
Dave Airlie 7547a917fa Merge branch 'drm-ttm-unmappable' into drm-core-next
* drm-ttm-unmappable:
  drm/radeon/kms: enable use of unmappable VRAM V2
  drm/ttm: remove io_ field from TTM V6
  drm/vmwgfx: add support for new TTM fault callback V5
  drm/nouveau/kms: add support for new TTM fault callback V5
  drm/radeon/kms: add support for new fault callback V7
  drm/ttm: ttm_fault callback to allow driver to handle bo placement V6
  drm/ttm: split no_wait argument in 2 GPU or reserve wait

Conflicts:
	drivers/gpu/drm/nouveau/nouveau_bo.c
2010-04-20 14:15:09 +10:00
Jerome Glisse 0c321c7962 drm/ttm: remove io_ field from TTM V6
All TTM driver have been converted to new io_mem_reserve/free
interface which allow driver to choose and return proper io
base, offset to core TTM for ioremapping if necessary. This
patch remove what is now deadcode.

V2 adapt to match with change in first patch of the patchset
V3 update after io_mem_reserve/io_mem_free callback balancing
V4 adjust to minor cleanup
V5 remove the needs ioremap flag
V6 keep the ioremapping facility in TTM

[airlied- squashed driver removals in here also]

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-20 14:13:09 +10:00
Jerome Glisse 82c5da6bf8 drm/ttm: ttm_fault callback to allow driver to handle bo placement V6
On fault the driver is given the opportunity to perform any operation
it sees fit in order to place the buffer into a CPU visible area of
memory. This patch doesn't break TTM users, nouveau, vmwgfx and radeon
should keep working properly. Future patch will take advantage of this
infrastructure and remove the old path from TTM once driver are
converted.

V2 return VM_FAULT_NOPAGE if callback return -EBUSY or -ERESTARTSYS
V3 balance io_mem_reserve and io_mem_free call, fault_reserve_notify
   is responsible to perform any necessary task for mapping to succeed
V4 minor cleanup, atomic_t -> bool as member is protected by reserve
   mecanism from concurent access
V5 the callback is now responsible for iomapping the bo and providing
   a virtual address this simplify TTM and will allow to get rid of
   TTM_MEMTYPE_FLAG_NEEDS_IOREMAP
V6 use the bus addr data to decide to ioremap or this isn't needed
   but we don't necesarily need to ioremap in the callback but still
   allow driver to use static mapping

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-20 14:12:05 +10:00
Daniel Vetter fd632aa34c drm: free core gem object from driver callbacks
When drivers embed the core gem object into their own structures,
they'll have to do this. Temporarily this results in an ugly

kfree(gem_obj);

in every gem driver.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-20 13:19:33 +10:00
Daniel Vetter 1d397043bc drm: extract drm_gem_object_init
This function can be used by drivers who allocate the drm gem object
on their own. No functional change in here, just preparation.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-20 13:19:25 +10:00
Dave Airlie 7fff400be6 Merge branch 'drm-fbdev-cleanup' into drm-core-next
* drm-fbdev-cleanup:
  drm/fb: remove drm_fb_helper_setcolreg
  drm/kms/fb: use slow work mechanism for normal hotplug also.
  drm/kms/fb: add polling support for when nothing is connected.
  drm/kms/fb: provide a 1024x768 fbcon if no outputs found.
  drm/kms/fb: separate fbdev connector list from core drm connectors
  drm/kms/fb: move to using fb helper crtc grouping instead of core crtc list
  drm/fb: fix fbdev object model + cleanup properly.

Conflicts:
	drivers/gpu/drm/i915/i915_drv.h
	drivers/gpu/drm/nouveau/nouveau_drv.h
2010-04-20 13:16:04 +10:00
Dave Airlie c9c2625ff4 Merge branch 'drm-edid-fixes' into drm-core-next
* drm-edid-fixes:
  drm/edid: When checking duplicate standard modes, walked the probed list
  drm/edid: Fix sync polarity for secondary GTF curve
  drm/modes: Fix interlaced mode names
  drm/edid: Add secondary GTF curve support
  drm/edid: Strengthen the algorithm for standard mode codes
  drm/edid: Fix the HDTV hack.
  drm/edid: Extend range-based mode addition for EDID 1.4
  drm/edid: Add test for monitor reduced blanking support.
  drm/edid: Fix preferred mode parse for EDID 1.4
  drm/edid: Remove some silly comments
  drm/edid: Remove arbitrary EDID extension limit
  drm/edid: Add modes for Established Timings III section
  drm/edid: Reshuffle mode list construction to closer match the spec
  drm/edid: Remove a redundant check
  drm/edid: Remove some misleading comments
  drm/edid: Fix secondary block fetch.
2010-04-20 13:14:38 +10:00
Dave Airlie c2b41276da Merge branch 'drm-ttm-pool' into drm-core-next
* drm-ttm-pool:
  drm/ttm: using kmalloc/kfree requires including slab.h
  drm/ttm: include linux/seq_file.h for seq_printf
  drm/ttm: Add sysfs interface to control pool allocator.
  drm/ttm: Use set_pages_array_wc instead of set_memory_wc.
  arch/x86: Add array variants for setting memory to wc caching.
  drm/nouveau: Add ttm page pool debugfs file.
  drm/radeon/kms: Add ttm page pool debugfs file.
  drm/ttm: Add debugfs output entry to pool allocator.
  drm/ttm: add pool wc/uc page allocator V3
2010-04-20 13:12:28 +10:00
Linus Torvalds 73c6c7fbb7 Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon/kms: add FireMV 2400 PCI ID.
  drm/radeon/kms: allow R500 regs VAP_ALT_NUM_VERTICES and VAP_INDEX_OFFSET
  drivers/gpu/radeon: Add MSPOS regs to safe list.
  drm/radeon/kms: disable the tv encoder when tv/cv is not in use
  drm/radeon/kms: adjust pll settings for tv
  drm/radeon/kms: fix tv dac conflict resolver
  drm/radeon/kms/evergreen: don't enable hdmi audio stuff
  drm/radeon/kms/atom: fix dual-link DVI on DCE3.2/4.0
  drm/radeon/kms: fix rs600 tlb flush
  drm/radeon/kms: print GPU family and device id when loading
  drm/radeon/kms: fix calculation of mipmapped 3D texture sizes
  drm/radeon/kms: only change mode when coherent value changes.
  drm/radeon/kms: more atom parser fixes (v2)
2010-04-19 07:27:06 -07:00
Dave Airlie 79b9517a33 drm/radeon/kms: add FireMV 2400 PCI ID.
This is an M24/X600 chip.

From RH# 581927

cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-19 18:53:10 +10:00
Jerome Glisse 9d87fa2138 drm/ttm: split no_wait argument in 2 GPU or reserve wait
There is case where we want to be able to wait only for the
GPU while not waiting for other buffer to be unreserved. This
patch split the no_wait argument all the way down in the whole
ttm path so that upper level can decide on what to wait on or
not.

[airlied: squashed these 4 for bisectability reasons.]
drm/radeon/kms: update to TTM no_wait splitted argument
drm/nouveau: update to TTM no_wait splitted argument
drm/vmwgfx: update to TTM no_wait splitted argument
[vmwgfx patch: Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>]

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-08 10:21:19 +10:00
Dave Airlie 4abe35204a drm/kms/fb: use slow work mechanism for normal hotplug also.
a) slow work is always used now for any fbcon hotplug, as its not
   a fast task and is more suited to being ran under slow work.

b) attempt to not do any fbdev changes when X is running as we'll
   just mess it up. This hooks set_par to hopefully do the changes
   once X hands control to fbdev.

This also adds the nouveau/intel hotplug support.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-07 10:30:38 +10:00
Dave Airlie 5c4426a782 drm/kms/fb: add polling support for when nothing is connected.
When we are running in a headless environment we have no idea what
output the user might plug in later, we only have hotplug detect
from the digital outputs. So if we detect no connected outputs at
initialisation, start a slow work operation to poll every 5 seconds
for an output.

this is only hooked up for radeon so far, on hw where we have full
hotplug detection there is no need for this.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-07 10:29:52 +10:00
Dave Airlie 0b4c0f3f0e drm/kms/fb: separate fbdev connector list from core drm connectors
This breaks the connection between the core drm connector list
and the fbdev connector usage, and allows them to become disjoint
in the future. It also removes the untype void* that was in the
connector struct to support this.

All connectors are added to the fbdev now but this could be
changed in the future.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-07 10:28:01 +10:00
Dave Airlie 8be48d924c drm/kms/fb: move to using fb helper crtc grouping instead of core crtc list
This move to using the list of crtcs in the fb helper and cleans up the
whole picking code, now we store the crtc/connectors we want directly
into the modeset and we use the modeset directly to set the mode.

Fixes from James Simmons and Ben Skeggs.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-07 10:24:56 +10:00
Dave Airlie 386516744b drm/fb: fix fbdev object model + cleanup properly.
The fbdev layer in the kms code should act like a consumer of the kms services and avoid having relying on information being store in the kms core structures in order for it to work.

This patch

a) removes the info pointer/psuedo palette from the core drm_framebuffer structure and moves it to the fbdev helper layer, it also removes the core drm keeping a list of kernel kms fbdevs.
b) migrated all the fb helper functions out of the crtc helper file into the fb helper file.
c) pushed the fb probing/hotplug control into the driver
d) makes the surface sizes into a structure for ease of passing
This changes the intel/radeon/nouveau drivers to use the new helper.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-07 10:21:03 +10:00
Pauli Nieminen c96af79e34 drm/ttm: Add sysfs interface to control pool allocator.
Sysfs interface allows user to configure pool allocator functionality and
change limits for the size of pool.

Signed-off-by: Pauli Nieminen <suokkos@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-06 11:36:18 +10:00
Pauli Nieminen 0745866165 drm/ttm: Add debugfs output entry to pool allocator.
ttm_page_alloc_debugfs can be registered to output the state
of pools.

Debugfs file will output number of pages freed from the pool,
number of pages in pool now and the lowes number of pages in
pool since previous shrink.

Signed-off-by: Pauli Nieminen <suokkos@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-06 11:35:45 +10:00
Pauli Nieminen 1403b1a38e drm/ttm: add pool wc/uc page allocator V3
On AGP system we might allocate/free routinely uncached or wc memory,
changing page from cached (wb) to uc or wc is very expensive and involves
a lot of flushing. To improve performance this allocator use a pool
of uc,wc pages.

Pools are protected with spinlocks to allow multiple threads to allocate pages
simultanously. Expensive operations are done outside of spinlock to maximize
concurrency.

Pools are linked lists of pages that were recently freed. mm shrink callback
allows kernel to claim back pages when they are required for something else.

Fixes:
* set_pages_array_wb handles highmem pages so we don't have to remove them
  from pool.
* Add count parameter to ttm_put_pages to avoid looping in free code.
* Change looping from _safe to normal in pool fill error path.
* Initialize sum variable and make the loop prettier in get_num_unused_pages.

* Moved pages_freed reseting inside the loop in ttm_page_pool_free.
* Add warning comment about spinlock context in ttm_page_pool_free.

Based on Jerome Glisse's and Dave Airlie's pool allocator.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Pauli Nieminen <suokkos@gmail.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-06 11:35:26 +10:00
Adam Jackson 7a37435008 drm/edid: Add secondary GTF curve support
Before CVT-R, some monitors would advertise support for an alternative
GTF formula with lower blanking intervals.  Correctly identify such
monitors, and use the alternative formula when generating modes for
them.

Note that we only do this for "standard" timing descriptors (tuples of
hsize in characters / aspect ratio / vertical refresh).  Range-based
mode lists still only refer to the primary GTF curve.  It would be
possible to do better for the latter case, but monitors are required to
support the primary curve over the entire advertised range, so all it
would win you is a lower pixel clock and therefore possibly better image
quality on analog links.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-06 10:40:25 +10:00
Adam Jackson 7466f4cc50 drm/edid: Remove arbitrary EDID extension limit
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-06 10:40:20 +10:00
Adam Jackson 61e57a8d72 drm/edid: Fix secondary block fetch.
This makes fetching the second EDID block on HDMI monitors actually
work.  DDC can't transfer more than 128 bytes at a time.  Also,
rearrange the code so the pure DDC bits are separate from block parse.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-06 10:40:16 +10:00
Tejun Heo 336f5899d2 Merge branch 'master' into export-slabh 2010-04-05 11:37:28 +09:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Dave Airlie 1fc59eda33 Merge branch 'radeon-for-airlied' of ../linux-2.6 into drm-linus
* 'radeon-for-airlied' of ../linux-2.6:
  drm/radeon/kms: prepare for more reclocking operations
  drm/radeon/kms: switch to condition waiting for reclocking
  drm/radeon/r600: add missing license and comments to r600_blit_shaders.c
  drm/radeon/kms: improve coding style a little
  drm/radeon/kms: remove dead audio/HDMI code
  drm/radeon/kms: enable audio engine on DCE32
  drm/radeon/kms: add HDMI code for pre-DCE3 R6xx GPUs
  drm/radeon/kms: clean assigning HDMI blocks to encoders
  drm/radeon/kms: clean HDMI definitions
  drm/radeon/kms/rs4xx: make sure crtcs are enabled when setting timing
  drm/radeon/kms/r1xx: enable hw i2c
  drm/radeon/kms: fix i2c prescale calc on older radeons
  drm/radeon/kms: fix for hw i2c
  drm/radeon/kms: fix pal tv-out support on legacy IGP chips
  drm/radeon/kms: further spread spectrum fixes
  drm/radeon/kms: use lcd pll limits when available
  drm/radeon/kms/atom: spread spectrum fix
  drm/radeon/kms: catch atombios infinite loop and break out of it
  drm/radeon: add new RS880 pci id
2010-03-15 11:08:59 +10:00
Dave Airlie 72e942dd84 drm/ttm: use drm calloc large and free large
Now that the drm core can do this, lets just use it, split the code out
so TTM doesn't have to drag all of drmP.h in.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15 10:31:43 +10:00
Alex Deucher 338e2b1d57 drm/radeon: add new RS880 pci id
This should go to 2.6.33 stable as well.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-15 09:22:12 +10:00
Dave Airlie 68de774582 Merge branch 'drm-radeon-testing' of /ssd/git/drm-radeon-next into drm-next-stage
* 'drm-radeon-testing' of /ssd/git/drm-radeon-next:
  drm/radeon: r100/r200 ums: block ability for userspace app to trash 0 page and beyond
  drm/ttm: fix function prototype to match implementation
  drm/radeon: use ALIGN instead of open coding it
  drm/radeon/kms: initialize set_surface_reg reg for rs600 asic
2010-03-01 16:08:57 +10:00
Randy Dunlap a55e8d452e drm/ttm: fix function prototype to match implementation
Fix function prototype to match its actual usage and implementation.

drivers/gpu/drm/ttm/ttm_bo_util.c:341:10: error: symbol 'ttm_io_prot' redeclared with different type (originally declared at include/drm/ttm/ttm_bo_driver.h:911) - incompatible argument 1 (different signedness)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc:	David Airlie <airlied@linux.ie>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-01 16:03:26 +10:00
Dave Airlie cf7934a2a0 Merge remote branch 'anholt/drm-intel-next' into drm-next-stage
* anholt/drm-intel-next: (103 commits)
  drm/i915: Use a dmi quirk to skip a broken SDVO TV output.
  drm/i915: enable/disable LVDS port at DPMS time
  drm/i915: check for multiple write domains in pin_and_relocate
  drm/i915: clean-up i915_gem_flush_gpu_write_domain
  drm/i915: reuse i915_gpu_idle helper
  drm/i915: ensure lru ordering of fence_list
  drm/i915: extract fence stealing code
  drm/i915: fixup active list locking in object_unbind
  drm/i915: reuse i915_gem_object_put_fence_reg for fence stealing code
  drm/i915: Add dependency on the intel agp module
  drm/i915: More s/IS_IRONLAKE/HAS_PCH_SPLIT for Sandybridge.
  drm/i915: Correct the Sandybridge chipset info structs.
  drm/i915: Disable the hangcheck reset on Sandybridge until we add support.
  drm/i915: Add a new mobile Sandybridge PCI ID.
  agp/intel: Add a new Sandybridge HB/IG PCI ID combo.
  drm/i915, agp/intel: Fix stolen memory size on Sandybridge
  drm/i915: Correct locking in the modesetting failure path, fixing a BUG_ON.
  drm/i915: Disable the surface tile swizzling on Sandybridge.
  agp/intel: Use a non-reserved value for the cache field of the PTEs.
  drm/i915: Fix sandybridge status page setup.
  ...
2010-03-01 15:41:26 +10:00
Dave Airlie aa71fa3cd5 Merge remote branch 'nouveau/for-airlied' into drm-next-stage
* nouveau/for-airlied: (25 commits)
  drm/nouveau: use ALIGN instead of open coding it
  drm/nouveau: report unknown connector state if lid closed
  drm/nouveau: support version 0x20 displayport tables
  drm/nouveau: Fix noaccel/nofbaccel option descriptions.
  drm/nv50: Implement ctxprog/state generation.
  drm/nouveau: use dcb connector types throughout the driver
  drm/nv50: enable hpd on any connector we know the gpio line for
  drm/nouveau: use dcb connector table for creating drm connectors
  drm/nouveau: construct a connector table for cards that lack a real one
  drm/nouveau: check for known dcb connector types
  drm/nouveau: parse dcb gpio/connector tables after encoders
  drm/nouveau: reorganise bios header, add dcb connector type enums
  drm/nouveau: merge nvbios and nouveau_bios_info
  drm/nouveau: merge parsed_dcb and bios_parsed_dcb into dcb_table
  drm/nouveau: rename parsed_dcb_gpio to dcb_gpio_table
  drm/nouveau: allow retrieval of vbios image from debugfs
  drm/nouveau: fix missing spin_unlock in failure path
  drm/nouveau: fix i2ctable bounds checking
  drm/nouveau: fix nouveau_i2c_find bounds checking
  drm/nouveau: fix pramdac_table range checking
  ...

Conflicts:
	drivers/gpu/drm/nouveau/nouveau_gem.c
2010-03-01 15:41:15 +10:00
Eric Anholt bad720ff3e drm/i915: Add initial bits for VGA modesetting bringup on Sandybridge.
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-02-26 13:23:17 -08:00
Dave Airlie eb6b6d7cdd Merge remote branch 'korg/drm-radeon-testing' into drm-next-stage
* korg/drm-radeon-testing: (62 commits)
  drm/radeon/kms: update new pll algo
  drm/radeon/kms: add support for square microtiles on r3xx-r5xx
  drm/radeon/kms: force pinning buffer into visible VRAM
  drm/radeon/kms/evergreen: fix typo in cursor code
  drm/radeon/kms: implement reading active PCIE lanes on R600+
  drm/radeon/kms: for downclocking non-mobility check PERFORMANCE state
  drm/radeon/kms: simplify storing current and requested PM mode
  drm/radeon: fixes for r6xx/r7xx gfx init
  drm/radeon/rv740: fix backend setup
  drm/radeon/kms: fix R3XX/R4XX memory controller initialization
  [rfc] drm/radeon/kms: pm debugging check for vbl.
  drm/radeon: Fix memory allocation failures in the preKMS command stream checking.
  drm: Add generic multipart buffer.
  drm/radeon/kms: simplify memory controller setup V2
  drm/radeon: Add asic hook for dma copy to r200 cards.
  drm/radeon/kms: Create asic structure for r300 pcie cards.
  drm/radeon/kms: remove unused r600_gart_clear_page
  drm/radeon/kms: remove HDP flushes from fence emit (v2)
  drm/radeon/kms: add LVDS pll quirk for Dell Studio 15
  drm/radeon/kms: simplify picking power state
  ...

Conflicts:
	drivers/gpu/drm/radeon/atom.c
	drivers/gpu/drm/radeon/atombios.h
	drivers/gpu/drm/radeon/atombios_dp.c
	drivers/gpu/drm/radeon/r600.c
	drivers/gpu/drm/radeon/r600_audio.c
	drivers/gpu/drm/radeon/r600_cp.c
	drivers/gpu/drm/radeon/radeon.h
	drivers/gpu/drm/radeon/radeon_connectors.c
	drivers/gpu/drm/radeon/radeon_ring.c
	drivers/gpu/drm/radeon/rv770.c
2010-02-26 16:23:23 +10:00
Ben Skeggs a1606a9596 drm/nouveau: new gem pushbuf interface, bump to 0.0.16
This commit breaks the userspace interface, and requires a new libdrm for
nouveau to operate again.

The multiple GEM_PUSHBUF ioctls that were present in 0.0.15 for
compatibility purposes are now gone, and replaced with the new ioctl which
allows for multiple push buffers to be submitted (necessary for hw index
buffers in the nv50 3d driver) and relocations to be applied on any buffer.

A number of other ioctls (CARD_INIT, GEM_PIN, GEM_UNPIN) that were needed
for userspace modesetting have also been removed.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-02-25 15:08:44 +10:00
Marek Olšák 939461d59d drm/radeon/kms: add support for square microtiles on r3xx-r5xx
Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-25 11:36:12 +10:00
Pauli Nieminen 7a9f0dd9c4 drm: Add generic multipart buffer.
Allocating multiple pages of memory for data that is coming
from user space may fail. To fix memory allocation failures
the buffer object should be split to multiple independ pages.

drm buffer provides generic interface to copy and process
large data arrays from user space.

Interface includes allocation and free functions to allocate
the buffer object and data storage pages.

All access operations are performed relative to a internal
pointer which is advanced with drm_buffer_advance function.

The buffer can be accessed using drm_buffer_pointer_to_XXX
functions if it is known that requested object doesn't split
over a page boundary. These functions don't do any error
checking to maximize performance.

If there is large object which could be split there is special
drm_buffer_read_object function. drm_buffer_read_object takes
a pointer as argument which is used as temporary store for
data if it is split over boundary in the buffer.

Signed-off-by: Pauli Nieminen <suokkos@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-23 09:46:20 +10:00
Luca Barbieri c3ae90c099 drm: introduce drm_gem_object_[handle_]unreference_unlocked
This patch introduces the drm_gem_object_unreference_unlocked
and drm_gem_object_handle_unreference_unlocked functions that
do not require holding struct_mutex.

drm_gem_object_unreference_unlocked calls the new
->gem_free_object_unlocked entry point if available, and
otherwise just takes struct_mutex and just calls ->gem_free_object

Signed-off-by: Luca Barbieri <luca@luca-barbieri.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-11 14:21:24 +10:00
Dave Airlie e8a47c10b2 Merge remote branch 'nouveau/for-airlied' of nouveau-2.6
* 'nouveau/for-airlied' of /home/airlied/kernel/drm-next:
  nouveau: fix state detection with switchable graphics
  drm/nouveau: move dereferences after null checks
  drm/nv50: make the pgraph irq handler loop like the pre-nv50 version
  drm/nv50: delete ramfc object after disabling fifo, not before
  drm/nv50: avoid unloading pgraph context when ctxprog is running
  drm/nv50: align size of buffer object to the right boundaries.
  drm/nv50: disregard dac outputs in nv50_sor_dpms()
  drm/nv50: prevent multiple init tables being parsed at the same time
  drm/nouveau: make dp auxch xfer len check for reads only
  drm/nv40: make INIT_COMPUTE_MEM a NOP, just like nv50
  drm/nouveau: Add proper vgaarb support.
  drm/nouveau: Fix fbcon on mixed pre-NV50 + NV50 multicard.
  drivers/gpu/drm/nouveau/nouveau_grctx.c: correct NULL test
  drm/nouveau: call ttm_bo_wait with the bo lock held to prevent hang
  drm/nouveau: Fixup semaphores on pre-nv50 cards.
  drm/nouveau: Add getparam to get available PGRAPH units.
  drm/nouveau: Add module options to disable acceleration.
  drm/nouveau: fix non-vram notifier blocks
2010-02-11 12:10:52 +10:00
Jakob Bornecrantz a87897edba drm/vmwgfx: Drop scanout flag compat and add execbuf ioctl parameter members. Bumps major.
Even if this bumps the version to 1 it does not mean the driver is
out of staging. From what we know this is the last backwards
incompatible change to the driver.

Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-11 12:03:26 +10:00
Thomas Hellstrom f77cef3db3 drm/vmwgfx: Update the user-space interface.
When time-based throttling is implemented, we need to bump minor.
When the old way of detecting scanout is removed, we need to bump major.
In the meantime, this change should not break existing user-space.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-11 11:58:09 +10:00
Marcin Kościelnicki 69c9700b54 drm/nouveau: Add getparam to get available PGRAPH units.
On nv50, this will be needed by applications using CUDA to know
how much stack/local memory to allocate.

Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-09 12:48:08 +10:00
Alex Deucher bcc1c2a1d2 drm/radeon/kms: add initial Evergreen support (Radeon HD 5xxx)
This adds initial Evergreen KMS support, it doesn't include
any acceleration features or interrupt handling yet.

Major changes are DCE4 handling for PLLs for the > 2 crtcs.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-09 09:44:02 +10:00
Alex Deucher 3c537889e1 drm/radeon/kms: add support for hardcoded edids in rom (v2)
Some servers hardcode an edid in rom so that they will
work properly with KVMs.  This is a port of the relevant
code from the ddx.

[airlied: reworked to validate edid at boot stage - and
remove special quirk, if there is a valid EDID in the BIOS rom
we'll just try and use it.]

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-09 09:31:20 +10:00
Linus Torvalds 9ce929078a Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon/kms: Fix oops after radeon_cs_parser_init() failure.
  drm/radeon/kms: move radeon KMS on/off switch out of staging.
  drm/radeon/kms: Bailout of blit if error happen & protect with mutex V3
  drm/vmwgfx: Don't send bad flags to the host
  drm/vmwgfx: Request SVGA version 2 and bail if not found
  drm/vmwgfx: Correctly detect 3D
  drm/ttm: remove unnecessary save_flags and ttm_flag_masked in ttm_bo_util.c
  drm/kms: Remove incorrect comment in struct drm_mode_modeinfo
  drm/ttm: remove padding from ttm_ref_object on 64bit builds
  drm/radeon/kms: release agp on error.
  drm/kms/radeon/agp: Move the check of the aper_size after drm_acp_acquire and drm_agp_info
  drm/kms/radeon/agp: Fix warning, format ‘%d’ expects type ‘int’, but argument 4 has type ‘size_t’
  drm/ttm: Avoid conflicting reserve_memtype during ttm_tt_set_page_caching.
  drm/kms/radeon: pick digitial encoders smarter. (v3)
  drm/radeon/kms: use active device to pick connector for encoder
  drm/radeon/kms: fix incorrect logic in DP vs eDP connector checking.
2010-02-01 10:46:49 -08:00
Marcin Kościelnicki fa5829b365 drm/kms: Remove incorrect comment in struct drm_mode_modeinfo
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 11:26:39 +10:00
Linus Torvalds abefedd538 Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (95 commits)
  drm/radeon/kms: preface warning printk with driver name
  drm/radeon/kms: drop unnecessary printks.
  drm: fix regression in fb blank handling
  drm/radeon/kms: make hibernate work on IGPs
  drm/vmwgfx: Optimize memory footprint for DMA buffers.
  drm/ttm: Allow system memory as a busy placement.
  drm/ttm: Fix race condition in ttm_bo_delayed_delete (v3, final)
  drm/nv50: prevent switching off SOR when in use for DVI-over-DP
  drm/nv50: fail auxch transaction if reply count not what we expect
  drm/nouveau: fix failure path if userspace specifies no valid memtypes
  drm/nouveau: report LVDS as disconnected if lid closed
  drm/radeon/kms: fix legacy get_engine/memory clock
  drm/radeon/kms/atom: atom parser fixes
  drm/radeon/kms: clean up atombios pll code
  drm/radeon/kms: clean up pll struct
  drm/radeon/kms/atom: fix crtc lock ordering
  drm/radeon: r6xx/r7xx possible security issue, system ram access
  drm/radeon/kms: r600/r700 don't test ib if ib initialization fails
  drm/radeon/kms: Forbid creation of framebuffer with no valid GEM object
  drm/radeon/kms: r600 handle irq vector ring overflow
  ...
2010-01-25 18:59:47 -08:00
Thomas Hellstrom 3f09ea4ecd drm/ttm: Add a swap_notify callback.
This is needed for a bugfix in the vmwgfx driver.
Drivers may have GPU bindings on buffers that core TTM is not aware of,
and TTM may view those buffers as ordinary system memory buffers.
Add a notifier to such drivers when TTM is about to move the buffer
contents out to swappable memory. The driver must then release any
private GPU bindings on those buffers.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-14 12:18:54 +10:00
Linus Torvalds c07d7237a6 Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (45 commits)
  drm/nv04: Fix set_operation software method.
  drm/nouveau: initialise DMA tracking parameters earlier
  drm/nouveau: use dma.max rather than pushbuf size for checking GET validity
  drm/nv04: differentiate between nv04/nv05
  drm/nouveau: Fix null deref in nouveau_fence_emit due to deleted fence
  drm/nv50: prevent a possible ctxprog hang
  drm/nouveau: have ttm's fault handler called directly
  drm/nv50: restore correct cache1 get/put address on fifoctx load
  drm/nouveau: create function for "dealing" with gpu lockup
  drm/nouveau: remove unused nouveau_channel_idle() function
  drm/nouveau: fix handling of fbcon colours in 8bpp
  drm/nv04: Context switching fixes.
  drm/nouveau: Use the software object for fencing.
  drm/nouveau: Allocate a per-channel instance of NV_SW.
  drm/nv50: make the blocksize depend on vram size
  drm/nouveau: better alignment of bo sizes and use roundup instead of ALIGN
  drm/nouveau: Don't skip card take down on nv0x.
  drm/nouveau: Implement nv42-nv43 TV load detection.
  drm/nouveau: Clean up the nv17-nv4x load detection code a bit.
  drm/nv50: fix fillrect color
  ...
2010-01-11 09:46:20 -08:00
Dave Airlie 0c9d2c418a Merge remote branch 'korg/drm-radeon-next' into drm-linus
* korg/drm-radeon-next:
  drm/radeon/kms: add additional safe regs for r4xx/rs6xx and r5xx
  drm/radeon/kms: Don't try to enable IRQ if we have no handler installed
  drm: Avoid calling vblank function is vblank wasn't initialized
  drm/radeon: mkregtable.c: close a file before exit
  drm/radeon/kms: Make sure we release AGP device if we acquired it
  drm/radeon/kms: Schedule host path read cache flush through the ring V2
  drm/radeon/kms: Workaround RV410/R420 CP errata (V3)
  drm/radeon/kms: detect sideport memory on IGP chips
  drm/radeon: fix a couple of array index errors
  drm/radeon/kms: add support for eDP (embedded DisplayPort)
  drm: Add eDP connector type
  drm/radeon/kms: pull in the latest upstream ObjectID.h changes
  drm/radeon/kms: whitespace changes to ObjectID.h
  drm/radeon/kms: fix typo in atom connector type handling
2010-01-11 14:42:58 +10:00
Dave Airlie e8d6d61586 Merge remote branch 'korg/drm-radeon-testing' into drm-testing 2010-01-08 13:29:53 +10:00
Alex Deucher 7970e677ac drm: Add eDP connector type
Add a new connector type for eDP (embedded displayport)

eDP is more or less the same as DP but there are some
cases when you might want to handle it separately.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-08 13:04:04 +10:00
Linus Torvalds 2c1f1895ef Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon/kms: rs600: use correct mask for SW interrupt
  gpu/drm/radeon/radeon_irq.c: move a dereference below a NULL test
  drm/radeon/radeon_device.c: move a dereference below a NULL test
  drm/radeon/radeon_fence.c: move a dereference below the NULL test
  drm/radeon/radeon_connectors.c: add a NULL test before dereference
  drm/radeon/kms: fix memory leak
  drm/kms: Fix &&/|| confusion in drm_fb_helper_connector_parse_command_line()
  drm/edid: Fix CVT width/height decode
  drm/edid: Skip empty CVT codepoints
  drm: remove address mask param for drm_pci_alloc()
  drm/radeon/kms: add missing breaks in i2c and ss lookups
  drm/radeon/kms: add primary dac adj values table
  drm/radeon/kms: fallback to default connector table
2010-01-06 20:26:42 -08:00
Zhenyu Wang e6be8d9d17 drm: remove address mask param for drm_pci_alloc()
drm_pci_alloc() has input of address mask for setting pci dma
mask on the device, which should be properly setup by drm driver.
And leave it as a param for drm_pci_alloc() would cause confusion
or mistake would corrupt the correct dma mask setting, as seen on
intel hw which set wrong dma mask for hw status page. So remove
it from drm_pci_alloc() function.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-07 13:15:50 +10:00
Linus Torvalds 635b3c9d55 Merge branch 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel
* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (23 commits)
  drm/i915: remove full registers dump debug
  drm/i915: Add DP dpll limit on ironlake and use existing DPLL search function
  drm/i915: Select the correct BPC for LVDS on Ironlake
  drm/i915: Make the BPC in FDI rx/transcoder be consistent with that in pipeconf on Ironlake
  drm/i915: Enable/disable the dithering for LVDS based on VBT setting
  drm/i915: Permit pinning whilst the device is 'suspended'
  drm/i915: Hold struct mutex whilst pinning power context bo.
  drm/i915: fix unused var
  drm/i915: Storage class should be before const qualifier
  drm/i915: remove render reclock support
  drm/i915: Fix RC6 suspend/resume
  drm/i915: execbuf2 support
  drm/i915: Reload hangcheck timer too for Ironlake
  drm/i915: only enable hotplug for detected outputs
  drm/i915: Track whether cursor needs physical address in intel_device_info
  drm/i915: Implement IS_* macros using static tables
  drm/i915: Move PCI IDs into i915 driver
  drm/i915: Update LVDS connector status when receiving ACPI LID event
  drm/i915: Add MALATA PC-81005 to ACPI LID quirk list
  drm/i915: implement new pm ops for i915
  ...
2010-01-06 18:16:17 -08:00
Jesse Barnes 76446cac68 drm/i915: execbuf2 support
This patch adds a new execbuf ioctl, execbuf2, for use by clients that
want to control fence register allocation more finely.  The buffer
passed in to the new ioctl includes a new relocation type to indicate
whether a given object needs a fence register assigned for the command
buffer in question.

Compatibility with the existing execbuf ioctl is implemented in terms
of the new code, preserving the assumption that fence registers are
required for pre-965 rendering commands.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[ickle: Remove pre-emptive clear_fence_reg()]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
[anholt: Removed dmesg spam]
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-06 09:39:39 -08:00
Arnd Bergmann ed8b670409 drm: convert drm_ioctl to unlocked_ioctl
drm_ioctl is called with the Big Kernel Lock held,
which shows up very high in statistics on vfs_ioctl.

Moving the lock into the drm_ioctl function itself
makes sure we blame the right subsystem and it gets
us one step closer to eliminating the locked version
of fops->ioctl.

Since drm_ioctl does not require the lock itself,
we only need to hold it while calling the specific
handler. The 32 bit conversion handlers do not
interact with any other code, so they don't need
the BKL here either and can just call drm_ioctl.

As a bonus, this cleans up all the other users
of drm_ioctl which now no longer have to find
the inode or call lock_kernel.

[airlied: squashed the non-driver bits
of the second patch in here, this provides
the flag for drivers to use to select unlocked
ioctls - but doesn't modify any drivers].

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.sourceforge.net
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-18 11:22:31 +10:00
Dave Airlie cbc8cc049a Merge remote branch 'korg/drm-vmware-staging' into drm-core-next 2009-12-18 09:53:50 +10:00
Jakob Bornecrantz fb1d9738ca drm/vmwgfx: Add DRM driver for VMware Virtual GPU
This commit adds the vmwgfx driver for the VWware Virtual GPU aka SVGA.
The driver is under staging the same as Nouveau and Radeon KMS. Hopefully
the 2D ioctls are bug free and don't need changing, so that part of the
API should be stable. But there there is a pretty big chance that the 3D API
will change in the future.

Signed-off-by: Thomas Hellström <thellstrom@vmware.com>
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-15 08:38:43 +10:00
Jakob Bornecrantz be1cb8689c drm/ttm: Add more driver type enums
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-15 08:38:18 +10:00
Ben Skeggs 6ee738610f drm/nouveau: Add DRM driver for NVIDIA GPUs
This adds a drm/kms staging non-API stable driver for GPUs from NVIDIA.

This driver is a KMS-based driver and requires a compatible nouveau
userspace libdrm and nouveau X.org driver.

This driver requires firmware files not available in this kernel tree,
interested parties can find them via the nouveau project git archive.

This driver is reverse engineered, and is in no way supported by nVidia.

Support for nearly the complete range of nvidia hw from nv04->g80 (nv50)
is available, and the kms driver should support driving nearly all
output types (displayport is under development still) along with supporting
suspend/resume.

This work is all from the upstream nouveau project found at
nouveau.freedesktop.org.

The original authors list from nouveau git tree is:
Anssi Hannula <anssi.hannula@iki.fi>
Ben Skeggs <bskeggs@redhat.com>
Francisco Jerez <currojerez@riseup.net>
Maarten Maathuis <madman2003@gmail.com>
Marcin Kościelnicki <koriakin@0x04.net>
Matthew Garrett <mjg@redhat.com>
Matt Parnell <mparnell@gmail.com>
Patrice Mandin <patmandin@gmail.com>
Pekka Paalanen <pq@iki.fi>
Xavier Chantry <shiningxc@gmail.com>
along with project founder Stephane Marchesin <marchesin@icps.u-strasbg.fr>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-11 21:29:34 +10:00
Jerome Glisse 09855acb1c drm/ttm: Convert ttm_buffer_object_init to use ttm_placement
Convert ttm_buffer_object_init to use struct ttm_placement and
rename to ttm_bo_init for consistency with function naming. This
allow to give more complex placement at buffer creation. For
instance you ask to allocate bo into vram first but if there is
not enough vram you can give system as a second possible
placement. It also allow to create buffer in a specific range.

Also rename ttm_buffer_object_validate to ttm_bo_validate.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-11 14:09:05 +10:00
Jerome Glisse 99d7e48e8c drm: Add memory manager debug function
drm_mm_debug_table will print the memory manager state
in table allowing to give a snapshot of the manager at
given point in time. Usefull for debugging.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-10 15:28:06 +10:00
Thomas Hellstrom 98ffc4158e drm/ttm: Have the TTM code return -ERESTARTSYS instead of -ERESTART.
Return -ERESTARTSYS instead of -ERESTART when interrupted by a signal.
The -ERESTARTSYS is converted to an -EINTR by the kernel signal layer
before returned to user-space.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-10 15:09:03 +10:00
Jerome Glisse ca262a9998 drm/ttm: Rework validation & memory space allocation (V3)
This change allow driver to pass sorted memory placement,
from most prefered placement to least prefered placement.
In order to avoid long function prototype a structure is
used to gather memory placement informations such as range
restriction (if you need a buffer to be in given range).
Range restriction is determined by fpfn & lpfn which are
the first page and last page number btw which allocation
can happen. If those fields are set to 0 ttm will assume
buffer can be put anywhere in the address space (thus it
avoids putting a burden on the driver to always properly
set those fields).

This patch also factor few functions like evicting first
entry of lru list or getting a memory space. This avoid
code duplication.

V2: Change API to use placement flags and array instead
    of packing placement order into a quadword.
V3: Make sure we set the appropriate mem.placement flag
    when validating or allocation memory space.

[Pending Thomas Hellstrom further review but okay
from preliminary review so far].

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-10 15:09:02 +10:00
Jerome Glisse a2e68e92d3 drm: Add search/get functions to get a block in a specific range
These are required for changes to TTM.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-10 15:09:01 +10:00
Dave Airlie 7b0a9e8302 Merge remote branch 'korg/drm-radeon-dp' into drm-linus
This merges the radeon KMS DisplayPort and hotplug detect support.

Tested on RV635 DP card with a Dell 2408 monitor.

Conflicts:
	drivers/gpu/drm/drm_fb_helper.c
2009-12-08 14:29:15 +10:00
Dave Airlie 3ff99164f6 Merge remote branch 'anholt/drm-intel-next' into drm-linus
This merges the upstream Intel tree and fixes up numerous conflicts
due to patches merged into Linus tree later in -rc cycle.

Conflicts:
	drivers/char/agp/intel-agp.c
	drivers/gpu/drm/drm_dp_i2c_helper.c
	drivers/gpu/drm/i915/i915_irq.c
	drivers/gpu/drm/i915/i915_suspend.c
2009-12-08 14:03:47 +10:00
Alex Deucher 5801ead6bd drm/radeon/kms: add support for DP modesetting
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-08 10:22:44 +10:00
Alex Deucher 1a66c95a64 drm/radeon/kms: DP fixes and cleanup from the ddx
- dpcp -> dpcd
- fix up dig encoder routing
- aux transaction table takes delay in 10 usec units

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-08 10:22:40 +10:00
Dave Airlie 746c1aa4d1 drm/radeon/kms: initial radeon displayport porting
This is enough to retrieve EDID and DPCP.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-08 10:22:31 +10:00
Dave Airlie ab2c067298 drm/intel: refactor DP i2c support and DP common header to drm helper
Both radeon and nouveau can re-use this code so move it up a level
so they can. However the hw interfaces for aux ch are different
enough that the code to translate from mode, address, bytes
to actual hw interfaces isn't generic, so move that code into the
Intel driver.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-08 09:24:23 +10:00
Thomas Hellstrom 4bfd75cb08 drm/ttm: Export symbols needed for the vmwgfx driver.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-07 15:22:07 +10:00
Thomas Hellstrom c078aa2fc4 drm/ttm: Add TTM execbuf utilities.
Utilities to reserve, unreserve and fence a list of TTM
buffer objects in a deadlock-safe manner.

Used by the vmwgfx driver.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-07 15:22:05 +10:00
Thomas Hellstrom 4aff1013f5 drm/ttm: Add ttm lock functionality.
This is intended to be used by ttm-aware drivers to
1) Block clients to inactive masters when
they try to validate buffers for GPU use.
2) Optionally block clients to the current master when
there is thrashing due to GPU memory shortage.

Used by the vmwgfx driver.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-07 15:22:03 +10:00
Thomas Hellstrom 88071539a3 drm/ttm: Add user-space objects.
Add objects needed for user-space to maintain reference counts on ttm objects.
This is used by the vmwgfx driver which allows user-space to maintain
map-counts on dma buffers, lock-counts on the ttm lock and ref-counts on
gpu surfaces, gpu contexts and dma buffer.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-07 15:22:01 +10:00
Jakob Bornecrantz 884840aa3c drm: Add dirty ioctl and property
This commit adds a ioctl and property to allow userspace
to notify the kernel that a framebuffer has changed. Instead
of snooping the command stream this allows finer grained
tracking of which areas have changed.

The primary user for this functionality is virtual hardware
like the vmware svga device, but also Xen hardware likes to
be notify. There is also real hardware like DisplayLink and
DisplayPort that might take advantage of this ioctl.

Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-04 09:25:47 +10:00
Martin Michlmayr c3a73ba13b drm/ttm: Fix build failure due to missing struct page
drm/ttm fails to build on MIPS because "struct page" is not known:
| In file included from drivers/gpu/drm/ttm/ttm_memory.c:28:
| include/drm/ttm/ttm_memory.h:154: warning: 'struct page' declared inside parameter list
| include/drm/ttm/ttm_memory.h:154: warning: its scope is only this definition or declaration, which is probably not what you want
| include/drm/ttm/ttm_memory.h:156: warning: 'struct page' declared inside parameter list
| drivers/gpu/drm/ttm/ttm_memory.c:540: error: conflicting types for 'ttm_mem_global_alloc_page'
| include/drm/ttm/ttm_memory.h:154: error: previous declaration of 'ttm_mem_global_alloc_page' was here
| drivers/gpu/drm/ttm/ttm_memory.c:561: error: conflicting types for 'ttm_mem_global_free_page'
| include/drm/ttm/ttm_memory.h:156: error: previous declaration of 'ttm_mem_global_free_page' was here

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Cc: stable@kernel.org
Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-04 09:11:16 +10:00
Kristian Høgsberg 1a95916f54 drm: Add compatibility #ifdefs for *BSD
This let's use use the linux drm headers as the canonical source for
libdrm on all platforms.

Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-04 08:59:28 +10:00
Thomas Hellstrom 862302ffe4 drm: Add support for drm master_[set|drop] callbacks.
The vmwgfx driver has a per master rw lock around TTM, to guarantee 
mutual exclusion when needed.

This is typically when all evictable buffers are evicted due to

1) vt switch
2) master switch
3) suspend / resume.

In the multi-master case, on master switch the new master takes the 
previously active master lock in write mode, and then evicts all 
buffers. Any clients to previous masters will then block on that lock 
when trying to validate a buffer. fbdev also acts as a virtual master
wrt this.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-04 08:55:46 +10:00
Adam Jackson 9340d8cfea drm/edid: Decode 3-byte CVT codes from EDID 1.4
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-04 08:53:47 +10:00
Adam Jackson 2dbdc52c81 drm/edid: Add new detailed block types from EDID 1.4
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-04 08:53:40 +10:00
Adam Jackson 7ac96a9cb4 drm/modes: Add drm_mode_hsync()
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-04 08:53:22 +10:00
Kristian Høgsberg 04b2d21800 drm/i915: Fix typo in ioctl struct name.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-01 10:29:47 -08:00
Li Peng 778c902640 drm/i915: Fix sync to vblank when VGA output is turned off
In current vblank-wait implementation, if we turn off VGA output,
drm_wait_vblank will still wait on the disabled pipe until timeout,
because vblank on the pipe is assumed be enabled. This would cause
slow system response on some system such as moblin.

This patch resolve the issue by adding a drm helper function
drm_vblank_off which explicitly clear vblank_enabled[crtc], wake up
any waiting queue and save last vblank counter before turning off
crtc. It also slightly change drm_vblank_get to ensure that we will
will return immediately if trying to wait on a disabled pipe.

Signed-off-by: Li Peng <peng.li@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[anholt: hand-applied for conflicts with overlay changes]
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-01 10:27:40 -08:00
Jesse Barnes e9560f7cb2 drm/i915: add GETPARAM request for page flipping
Add a GETPARAM request for checking if page flipping is supported.
Useful for the 2D driver to enable the flipping path.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-01 09:19:07 -08:00
Jesse Barnes 7bd4d7be5c drm: use page flip event to signal flip completion
We don't actually know which frame number the flip will complete on, so
userspace needs a specific flip notification to tell it when the last flip
completed.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2009-12-01 09:11:53 -08:00
Eric Anholt f40d6817a5 Merge remote branch 'airlied/drm-next' into drm-intel-next 2009-12-01 09:01:54 -08:00
Eric Anholt c8e0f93a38 drm/i915: Replace a calloc followed by copying data over it with malloc.
Execbufs involve quite a bit of payload, to the extent that cache misses
show up in the profiles here, and a suspicion that some of those cachelines
may get evicted and then reloaded in the subsequent copy.

This is still abstracted like drm_calloc_large since we want to check for
size overflow, and because we want to choose between kmalloc and vmalloc
on the fly.  cairo's interface for malloc-with-calloc's-args was used as
the model.

Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-25 06:36:21 -08:00
Clemens Ladisch 7a654158bd drm: set the type of the drm_framebuffer::fbdev field
The fbdev field of the drm_framebuffer structure is always used to store
a pointer to a fb_info, so there is no reason for it to be void*.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-19 13:02:49 +10:00
Kristian Høgsberg d91d8a3f88 drm/kms: add page flipping ioctl
This adds a page flipping ioctl to the KMS API.  The ioctl takes an fb ID
and a ctrc ID and flips the crtc to the given fb at the next vblank.
The ioctl returns immediately but the flip doesn't happen until after
any rendering that's currently queued up against the new framebuffer
is done.  After submitting a page flip, any execbuffer involving the
old front buffer will block until the flip is completed.

Optionally, a vblank event can be generated when the swap eventually
happens.

Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-18 10:05:47 +10:00
Andres Salomon 156822f717 drm: kill more unused DRM macros
There are a few more macros in drmP.h that are unused; DRM_GET_PRIV_SAREA,
DRM_ARRAY_SIZE, and DRM_WAITCOUNT can go away completely.

Unfortunately, DRM_COPY is still used in one place, but we can at least
move it to where it's used.  It's an awful looking macro..

[akpm: fix overeagerness]
Signed-off-by: Andres Salomon <dilinger@collabora.co.uk>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-18 10:02:49 +10:00
Andres Salomon 420a457088 drm: kill some unused DRM_PROC macros from drmP.h
i915_gem_proc.c appears to have been the last user of the DRM_PROC_*
macros, and it has gone away.  The macros should die as well.

Signed-off-by: Andres Salomon <dilinger@collabora.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-18 10:02:49 +10:00
Kristian Høgsberg c9a9c5e02a drm: Add async event synchronization for drmWaitVblank
This patch adds a new flag to the drmWaitVblank ioctl, which asks the drm
to return immediately and notify userspace when the specified vblank sequence
happens by sending an event back on the drm fd.

The event mechanism works with the other flags supported by the ioctls,
specifically, the vblank sequence can be specified relatively or absolutely,
and works for primary and seconday crtc.

The signal field of the vblank request is used to provide user data,
which will be sent back to user space in the vblank event.

Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-18 10:02:47 +10:00
Eric Anholt 5b8f0be0dc Merge remote branch 'airlied/drm-next' into drm-intel-next 2009-11-05 15:04:06 -08:00
Daniel Vetter 02e792fbaa drm/i915: implement drmmode overlay support v4
This implements intel overlay support for kms via a device-specific
ioctl. Thomas Hellstrom brought up the idea of a general ioctl (on
dri-devel). We've reached the conclusion that such an infrastructure
only makes sense when multiple kms overlay implementations exists,
which atm don't (and it doesn't look like this is gonna change).

Open issues:
- Runs in sync with the gpu, i.e. unnecessary waiting. I've decided
  to wait on this because the hw tends to hang when changing something
  in this area. I left some dummy functions as infrastructure.
- polyphase filtering uses a static table.
- uses uninterruptible sleeps. Unfortunately the alternatives may
  unnecessarily wedged the hw if/when we timeout too early (and
  userspace only overloaded the batch buffers with stuff worth a few
  secs of gpu time).

Changes since v1:
- fix off-by-one misconception on my side. This fixes fullscreen
  playback.
Changes since v2:
- add underrun detection as spec'ed for i965.
- flush caches properly, fixing visual corruptions.
Changes since v4:
- fix up cache flushing of overlay memory regs.
- killed require_pipe_a logic - it hangs the chip.

Tested-By: diego.abelenda@gmail.com (on a 865G)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[anholt: Resolved against the MADVISE ioctl going in before this one]
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-05 14:47:08 -08:00
Daniel Vetter 48764bf43f drm/i915: add i915_lp_ring_sync helper
This just waits until the hw passed the current ring position with
cmd execution. This slightly changes the existing i915_wait_request
function to make uninterruptible waiting possible - no point in
returning to userspace while mucking around with the overlay, that
piece of hw is just too fragile.

Also replace a magic 0 with the symbolic constant (and kill the then
superflous comment) while I was looking at the code.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-05 14:47:07 -08:00
Daniel Vetter 7a9c906094 drm: make drm_mode_object_find typesafe
I've wasted half a day hunting a bug that could easily be spotted by
gcc. Prevent this from reoccurring.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-05 14:47:06 -08:00
Kristian Høgsberg c182be37ed drm: Add async event synchronization for drmWaitVblank
This patch adds a new flag to the drmWaitVblank ioctl, which asks the drm
to return immediately and notify userspace when the specified vblank sequence
happens by sending an event back on the drm fd.

The event mechanism works with the other flags supported by the ioctls,
specifically, the vblank sequence can be specified relatively or absolutely,
and works for primary and seconday crtc.

The signal field of the vblank request is used to provide user data,
which will be sent back to user space in the vblank event.

Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-26 13:29:27 +10:00
Dave Airlie c1176d6f03 Merge branch 'drm-next' of ../drm-next into drm-linus
conflict in radeon since new init path merged with vga arb code.

Conflicts:
	drivers/gpu/drm/radeon/radeon.h
	drivers/gpu/drm/radeon/radeon_asic.h
	drivers/gpu/drm/radeon/radeon_device.c
2009-10-08 14:03:05 +10:00
Dave Airlie b8c00ac5b5 drm/fb: add more correct 8/16/24/32 bpp fb support.
The previous patches had some unwanted side effects, I've fixed
the lack of 32bpp working, and fixed up 16bpp so it should also work.

this also adds the interface to allow the driver to set a preferred
console depth so for example low memory rn50 can set it to 8bpp.
It also catches 24bpp on cards that can't do it and forces 32bpp.

Tested on r100/r600/i945.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-06 13:54:01 +10:00
Dave Airlie 068143d388 drm/fb: add setcmap and fix 8-bit support.
This adds support for the setcmap api and fixes the 8bpp
support at least on radeon hardware. It adds a new load_lut
hook which can be called once the color map is setup.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-05 10:00:59 +10:00
Dave Airlie dfee5614e4 drm/radeon/kms: respect single crtc cards, only create one crtc. (v2)
Also add single crtc for RN50 chips.

changes in v2:
fix vblank init to respect single crtc flag
fix r100 mode bandwidth to respect single crtc flag

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-05 10:00:58 +10:00
Linus Torvalds e15daf6cdf Merge branch 'drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (25 commits)
  drm/radeon/kms: Convert R520 to new init path and associated cleanup
  drm/radeon/kms: Convert RV515 to new init path and associated cleanup
  drm: fix radeon DRM warnings when !CONFIG_DEBUG_FS
  drm: fix drm_fb_helper warning when !CONFIG_MAGIC_SYSRQ
  drm/r600: fix memory leak introduced with 64k malloc avoidance fix.
  drm/kms: make fb helper work for all drivers.
  drm/radeon/r600: fix offset handling in CS parser
  drm/radeon/kms/r600: fix forcing pci mode on agp cards
  drm/radeon/kms: fix for the extra pages copying.
  drm/radeon/kms/r600: add support for vline relocs
  drm/radeon/kms: fix some bugs in vline reloc
  drm/radeon/kms/r600: clamp vram to aperture size
  drm/kms: protect against fb helper not being created.
  drm/r600: get values from the passed in IB not the copy.
  drm: create gitignore file for radeon
  drm/radeon/kms: remove unneeded master create/destroy functions.
  drm/kms: start adding command line interface using fb.
  fb: change rules for global rules match.
  drm/radeon/kms: don't require up to 64k allocations. (v2)
  drm/radeon/kms: enable dac load detection by default.
  ...

Trivial conflicts in drivers/gpu/drm/radeon/radeon_asic.h due to adding
'->vga_set_state' function pointers.
2009-09-30 08:03:00 -07:00
Dave Airlie 74bf2ad508 drm/kms: make fb helper work for all drivers.
This initialises the fb helper with the connector helper,
so that the fb cmdline code works for intel as well.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-28 15:31:10 +10:00
Dave Airlie d50ba256b5 drm/kms: start adding command line interface using fb.
[note this requires an fb patch posted to linux-fbdev-devel already]

This uses the normal video= command line option to control the kms
output setup at boot time. It is used to override the autodetection
done by kms.

video= normally takes a framebuffer as the first parameter, in kms
it will take a connector name, DVI-I-1, or LVDS-1 etc. If no output
connector is specified the mode string will apply to all connectors.

The mode specification used will match down the probed modes, and if
no mode is found it will add a CVT mode that matches.

video=1024x768 - all connectors match a 1024x768 mode or add a CVT on
video=VGA-1:1024x768, VGA-1 connector gets mode only.

The same strings as used in current fb modedb.c are used, except I've
added three more letters, e, D, d, e = enable, D = enable Digital,
d = disable, which allow a connector to be forced into a certain state.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-25 13:08:20 +10:00
Linus Torvalds 94e0fb086f Merge branch 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel
* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (57 commits)
  drm/i915: Handle ERESTARTSYS during page fault
  drm/i915: Warn before mmaping a purgeable buffer.
  drm/i915: Track purged state.
  drm/i915: Remove eviction debug spam
  drm/i915: Immediately discard any backing storage for uneeded objects
  drm/i915: Do not mis-classify clean objects as purgeable
  drm/i915: Whitespace correction for madv
  drm/i915: BUG_ON page refleak during unbind
  drm/i915: Search harder for a reusable object
  drm/i915: Clean up evict from list.
  drm/i915: Add tracepoints
  drm/i915: framebuffer compression for GM45+
  drm/i915: split display functions by chip type
  drm/i915: Skip the sanity checks if the current relocation is valid
  drm/i915: Check that the relocation points to within the target
  drm/i915: correct FBC update when pipe base update occurs
  drm/i915: blacklist Acer AspireOne lid status
  ACPI: make ACPI button funcs no-ops if not built in
  drm/i915: prevent FIFO calculation overflows on 32 bits with high dotclocks
  drm/i915: intel_display.c handle latency variable efficiently
  ...

Fix up trivial conflicts in drivers/gpu/drm/i915/{i915_dma.c|i915_drv.h}
2009-09-24 10:30:41 -07:00
Chris Wilson bb6baf76f4 drm/i915: Track purged state.
In order to correctly prevent the invalid reuse of a purged buffer, we
need to track such events and warn the user before something bad
happens.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2009-09-23 01:10:38 +01:00
Linus Torvalds 44040f107e Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (133 commits)
  drm/vgaarb: add VGA arbitration support to the drm and kms.
  drm/radeon: some r420s have a CP race with the DMA engine.
  drm/radeon/r600/kms: rv670 is not DCE3
  drm/radeon/kms: r420 idle after programming GA_ENHANCE
  drm/radeon/kms: more fixes to rv770 suspend/resume path.
  drm/radeon/kms: more alignment for rv770.c with r600.c
  drm/radeon/kms: rv770 blit init called too late.
  drm/radeon/kms: move around new init path code to avoid posting at init
  drm/radeon/r600: fix some issues with suspend/resume.
  drm/radeon/kms: disable VGA rendering engine before taking over VRAM
  drm/radeon/kms: Move radeon_get_clock_info() call out of radeon_clocks_init().
  drm/radeon/kms: add initial connector properties
  drm/radeon/kms: Use surfaces for scanout / cursor byte swapping on big endian.
  drm/radeon/kms: don't fail if we fail to init GPU acceleration
  drm/r600/kms: fixup number of loops per blit calculation.
  drm/radeon/kms: reprogram format in set base.
  drm/radeon: avivo chips have no separate int bit for display
  drm/radeon/r600: don't do interrupts
  drm: fix _DRM_GEM addmap error message
  drm: update crtc x/y when only fb changes
  ...

Fixed up trivial conflicts in firmware/Makefile due to network driver
(cxgb3) and drm (mga/r128/radeon) firmware being listed next to each
other.
2009-09-21 08:10:09 -07:00
Dave Airlie 28d520433b drm/vgaarb: add VGA arbitration support to the drm and kms.
VGA arb requires DRM support for non-kms drivers, to turn on/off
irqs when disabling the mem/io regions.

VGA arb requires KMS support for GPUs where we can turn off VGA
decoding. Currently we know how to do this for intel and radeon
kms drivers, which allows them to be removed from the arbiter.

This patch comes from Fedora rawhide kernel.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-21 15:00:27 +10:00
Jaswinder Singh Rajput 067006a5f5 includecheck fix: include/drm, drm_memory.h
fix the following 'make includecheck' warning:

  include/drm/drm_memory.h: linux/vmalloc.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <1247068169.4382.99.camel@ht.satnam>
Acked-by: Dave Airlie <airlied@redhat.com>
2009-09-20 16:02:58 +05:30
Michel Dänzer c88f9f0c91 drm/radeon/kms: Use surfaces for scanout / cursor byte swapping on big endian.
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-18 16:01:59 +10:00
Jerome Glisse 733289c265 drm/radeon/kms: don't fail if we fail to init GPU acceleration
Userspace can query if acceleration is working or not true get
info ioctl and could fallback to software if for some reason
kernel failed to initialize KMS. This should allow to give a
working KMS setup in all case (even with non functionning accel).

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-18 16:01:57 +10:00
Chris Wilson 3ef94daae7 drm/i915: Add ioctl to set 'purgeability' of objects
Similar to the madvise() concept, the application may wish to mark some
data as volatile. That is in the event of memory pressure the kernel is
free to discard such buffers safe in the knowledge that the application
can recreate them on demand, and is simply using these as a cache.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-17 14:43:31 -07:00
Fabian Henze 7839c5d551 drm/i915: add B43 chipset support
Signed-off-by: Fabian Henze <hoacha@quantentunnel.de>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-08 23:33:26 -07:00
Dave Airlie f1938cd6e9 drm: include seq_file.h for debugfs builds.
Fixes a warning seen on powerpc.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-08 11:32:08 +10:00
Dave Airlie 11670d3c93 Merge intel drm-intel-next branch
Merge remote branch 'anholt/drm-intel-next' of ../anholt-2.6 into drm-next

Conflicts:
	drivers/gpu/drm/i915/intel_display.c
	drivers/gpu/drm/i915/intel_drv.h
	drivers/gpu/drm/i915/intel_sdvo.c
2009-09-07 20:27:20 +10:00
Zhao Yakui f0fda0a47b drm/kms: add a function that can add the mode for the output device without EDID
Add a function that can be used to add the default mode for the output device
without EDID.
It will add the default mode that meets with the requirements of given
hdisplay/vdisplay limit.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-07 18:44:40 +10:00
Dave Airlie a3a0544b2c drm/kms: add explicit encoder disable function and detach harder.
For shared tv-out and VGA encoders, we really need to know if
the encoder is just being switched off temporarily in blanking
or if we are really disabling it hard.

Also we need to try harder to disconnect encoders from unused
connectors so we can share more efficently.

(shared encoders stuff is coming in radeon tv-out support)

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-02 09:42:59 +10:00
Dave Airlie fa8a123855 drm/mm: add ability to dump mm lists via debugfs
This adds code to the drm_mm to talk to debugfs, and adds
support to radeon to add the VRAM and GTT mm lists to debugfs.

I tested with spinlock debugging and it doesn't give out.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-02 09:39:43 +10:00
Dave Airlie 785b93ef8c drm/kms: move driver specific fb common code to helper functions (v2)
Initially I always meant this code to be shared, but things
ran away from me before I got to it.

This refactors the i915 and radeon kms fbdev interaction layers
out into generic helpers + driver specific pieces.

It moves all the panic/sysrq enhancements to the core file,
and stores a linked list of kernel fbs. This could possibly be
improved to only store the fb which has fbcon on it for panics
etc.

radeon retains some specific codes used for a big endian
workaround.

changes:
fix oops in v1
fix freeing path for crtc_info

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-31 09:09:31 +10:00
Maarten Maathuis f380ef8691 drm/crtc_helper: place drm_helper_encoder_in_use() in the header file
- The symbol was already exported.

Signed-off-by: Maarten Maathuis <madman2003@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-31 09:09:29 +10:00
Pekka Paalanen a1a2d1d322 drm: GEM handles are u32, not int
Several functions in the GEM kernel API used int as handle type, but
user API has it __u32 which is also the intended type.

Replace int with u32.

Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-27 11:21:08 +10:00
Dave Airlie c9c97b8c75 drm/ttm: consolidate cache flushing code in one place.
This merges the TTM and drm cache flushing into one file in the
drm core.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-27 09:53:47 +10:00
Alex Deucher f779b3e513 drm/radeon: add GET_PARAM/INFO support for Z pipes
Needed for occlusion queries on rv530 chips.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-21 19:10:30 +10:00
Dave Airlie e3b2415e28 drm/radeon/kms: implement the bo busy ioctl properly.
The previous patch assumes the ioctl already existed, when
it actually didn't.

It also didn't return the correct error code.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-21 09:51:30 +10:00
Dave Airlie 51c8b4071d Merge Linus master to drm-next
linux-next conflict reported needed resolution.

Conflicts:
	drivers/gpu/drm/drm_crtc.c
	drivers/gpu/drm/drm_edid.c
	drivers/gpu/drm/i915/intel_sdvo.c
	drivers/gpu/drm/radeon/radeon_ttm.c
	drivers/gpu/drm/ttm/ttm_bo.c
2009-08-20 13:38:04 +10:00
Thomas Hellstrom a987fcaa80 ttm: Make parts of a struct ttm_bo_device global.
Common resources, like memory accounting and swap lists should be
global and not per device. Introduce a struct ttm_bo_global to
accomodate this, and register it with sysfs. Add a small sysfs interface
to return the number of active buffer objects.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-08-19 16:10:34 +10:00
Thomas Hellstrom 5fd9cbad3a drm/ttm: Memory accounting rework.
Use inclusive zones to simplify accounting and its sysfs representation.
Use DMA32 accounting where applicable.

Add a sysfs interface to make the heuristically determined limits
readable and configurable.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-08-19 16:09:53 +10:00
Thomas Hellstrom 327c225bd5 drm: Enable drm drivers to add drm sysfs devices.
Export utility functions for drivers to add specialized devices in the
sysfs drm class subdirectory.

Initially this will be needed form TTM to add a virtual device that
handles power management.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-08-19 16:08:51 +10:00
Pekka Paalanen a0724fcf82 drm/ttm: optimize bo_kmap_type values
A micro-optimization on the function ttm_kmap_obj_virtual().

By defining the values of enum ttm_bo_kmap_obj::bo_kmap_type to have a
bit indicating iomem, size of the function ttm_kmap_obj_virtual() will be
reduced by 16 bytes on x86_64 (gcc 4.1.2).

ttm_kmap_obj_virtual() may be heavily used, when buffer objects are
accessed via wrappers, that work for both kinds of memory addresses:
iomem cookies and kernel virtual.

Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-19 16:07:00 +10:00
Pekka Paalanen 949ef70e2d drm/kms: no need to return void value (encoder)
Cc: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-19 16:06:49 +10:00
Jesse Barnes 53bd83899f drm: clarify scaling property names
Now that we're using the scaling property in the Intel driver I noticed
that the names were a bit confusing.  I've corrected them according to
our discussion on IRC and the mailing list, though I've left out
potential new additions for a new scaling property with an integer (or
two) for the scaling factor.  None of the drivers implement that today,
but if someone wants to do it, I think it could be done with the
addition of a single new type and a new property to describe the
scaling factor in the X and Y directions.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-19 16:06:40 +10:00
Dave Airlie 776f3360de drm: fixup includes in encoder slave header files.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-19 15:56:37 +10:00
Dave Airlie cefb87efc9 drm/radeon/kms: implement bo busy check + current domain
This implements the busy ioctl along with a current domain check.
returns 0 or -EBUSY
puts the current domain no matter what the answer.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-17 12:28:56 +10:00
Francisco Jerez a75f023629 drm: Add more standard TV properties.
Overscan, saturation, hue. Used in the nouveau driver for GPUs with
integrated TV encoders.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-13 10:33:48 +10:00
Alex Deucher 6502fbfaf8 drm/radeon: Add support for RS880 chips
These are new AMD IGP chips

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-05 12:07:09 +10:00
Francisco Jerez b6b7902e54 drm: Define some new standard TV properties.
Namely "brightness", "contrast" and "flicker reduction".

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-04 14:14:46 +10:00
Francisco Jerez aeaa1ad3ff drm: Define DRM_MODE_SUBCONNECTOR_SCART
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-04 14:11:00 +10:00
Francisco Jerez 74bd3c26b9 drm: Define DRM_MODE_CONNECTOR_TV
The existing TV connector types are often unsuitable either because
there is no way to probe them until they're actually plugged in or
because they can change during run time (e.g. 7-pin DIN connectors
that behave as S-Video, Component, Composite or SCART depending on the
adaptor plugged in).

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-04 14:10:56 +10:00
Francisco Jerez 2066facca4 drm/kms: slave encoder interface.
Define some helper functions to make easier to detach a KMS encoder
implementation from the drm module of the GPU it's used in. This is
mainly useful for some external I2C encoders known to be present on
cards with GPUs from several different manufacturers.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-04 14:10:51 +10:00
Zhao Yakui 87fdff81cd DRM: Add the explanation about DRM debug level
Add the explanation about DRM debug level in the drmP header file. This is to
explain how/where to use the different DRM debug level.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-04 14:02:41 +10:00
Zhao Yakui f940f37f02 drm: Remove the macro defintion of DRM_DEBUG_MODE
Two macro definitions of DRM_DEBUG_KMS/MODE can be used to add the debug
info related with KMS. It is confusing.
So remove the macro definition of DRM_DEBUG_MODE. Instead it can be replaced
by the DRM_DEBUG_KMS.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-04 14:02:39 +10:00
Zhao Yakui 8a4c47f346 drm: Remove the unused prefix in DRM_DEBUG_KMS/DRIVER/MODE
We will have to add a prefix when using the macro defintion of DRM_DEBUG_KMS
/DRM_DEBUG_DRIVER/MODE. It is not convenient. We should use the DRM_NAME
as default prefix.
So remove the prefix in the macro definition of DRM_DEBUG_KMS/DRIVER/MODE.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-04 14:02:31 +10:00
Alex Deucher 7320700df1 drm/radeon: add some new r7xx pci ids
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-04 13:32:39 +10:00
Linus Torvalds 84210aeb4a Merge branch 'drm-radeon-kms' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-radeon-kms' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (35 commits)
  drm/radeon: set fb aperture sizes for framebuffer handoff.
  drm/ttm: fix highuser vs dma32 confusion.
  drm/radeon: Fix size used for benchmarking BO copies.
  drm/radeon: Add radeon.test parameter for running BO GPU copy tests.
  drm/radeon/kms: allow interruptible waits for objects.
  drm/ttm: powerpc: Fix Highmem cache flushing.
  x86: Export kmap_atomic_prot() needed for TTM.
  drm/ttm: Fix ttm in-kernel copying of pages with non-standard caching attributes.
  drm/ttm: Fix an oops and sync object leak.
  drm/radeon/kms: vram sizing on certain r100 chips needs workaround.
  drm/radeon: Pay more attention to object placement requested by userspace.
  drm/radeon: Fall back to evicting BOs with memcpy if necessary.
  drm/radeon: Don't unreserve twice on failure to validate.
  drm/radeon/kms: fix bandwidth computation on avivo hardware
  drm/radeon/kms: add initial colortiling support.
  drm/radeon/kms: fix hotspot handling on pre-avivo chips
  drm/radeon/kms: enable frac fb divs on rs600/rs690/rs740
  drm/radeon/kms: add PLL flag to prefer frequencies <= the target freq
  drm/radeon/kms: block RN50 from using 3D engine.
  drm/radeon/kms: fix VRAM sizing like DDX does it.
  ...
2009-07-29 12:31:59 -07:00
Dave Airlie e024e11070 drm/radeon/kms: add initial colortiling support.
This adds new set/get tiling interfaces where the pitch
and macro/micro tiling enables can be set. Along with
a flag to decide if this object should have a surface when mapped.

The only thing we need to allocate with a mapped surface should be
the frontbuffer. Note rotate scanout shouldn't require one, and
back/depth shouldn't either, though mesa needs some fixes.

It fixes the TTM interfaces along Thomas's suggestions, and I've tested
the surface stealing code with two X servers and not seen any lockdep issues.

I've stopped tiling the fbcon frontbuffer, as I don't see there being
any advantage other than testing, I've left the testing commands in there,
just flip the fb_tiled to true in radeon_fb.c

Open: Can we integrate endian swapping in with this?

Future features:
texture tiling - need to relocate texture registers TXOFFSET* with tiling info.

This also merges Michel's cleanup surfaces regs at init time patch
even though it makes sense on its own, this patch really relies on it.

Some PowerMac firmwares set up a tiling surface at the beginning of VRAM
which messes us up otherwise.
that patch is:
Signed-off-by: Michel Dänzer <daenzer@vmware.com>

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-07-29 15:42:18 +10:00
Dave Airlie ad49f50186 drm/ttm/radeon: add dma32 support.
This add support for using dma32 memory on gpus that really need it.

Currently IGPs are left without DMA32 but we might need to change
that unless we can fix rs690.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-07-15 17:13:18 +10:00
Thomas Hellstrom d1724078d6 ttm: Make messages more readable.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-07-15 17:13:09 +10:00
Zhao Yakui 26bbdadad3 drm/mode: add the GTF algorithm in kernel space
Add the GTF algorithm in kernel space. And this function can be called to
generate the required modeline.

I copied it from the file of xserver/hw/xfree86/modes/xf86gtf.c. What I have
done is to translate it by using integer calculation. This is to avoid
the float-point calculation in kernel space.
At the same tie I also refer to the function of fb_get_mode in
drivers/video/fbmon.c

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-07-15 16:31:43 +10:00
Zhao Yakui d782c3f95c drm/mode: add the CVT algorithm in kernel space
Add the CVT algorithm in kernel space. And this function can be called to
generate the required modeline.

I copied it from the file of xserver/hw/xfree86/modes/xf86cvt.c. What I have
done is to translate it by using integer calculation. This is to avoid
the float-point calculation in kernel space.

[airlied:- cleaned up some bits]
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-07-15 16:29:33 +10:00
Alex Deucher 069a9dce38 drm/radeon: add some missing pci ids
Also, fix ordering for a couple others

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-07-15 15:48:36 +10:00
Michel Dänzer e14cbee401 drm: Fix shifts which were miscalculated when converting from bitfields.
Looks like I managed to mess up most shifts when converting from bitfields. :(

The patch below works on my Thinkpad T500 (as well as on my PowerBook,
where the previous change worked as well, maybe out of luck...). I'd
appreciate more testing and eyes looking over it though.

Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Tested-by: Michael Pyne <mpyne@kde.org>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-06-24 16:11:04 +10:00
Michel Dänzer 0454beab0f drm: EDID endianness fixes.
Mostly replacing bitfields with explicit masks and shifts.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-19 09:11:13 +10:00
Thomas Hellstrom 89579f7782 drm: Apply "Memory fragmentation from lost alignment blocks"
also for the atomic path by using a common code-path.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-19 09:01:12 +10:00
Eric Anholt 9a298b2acd drm: Remove memory debugging infrastructure.
It hasn't been used in ages, and having the user tell your how much
memory is being freed at free time is a recipe for disaster even if it
was ever used.

Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-18 13:00:33 -07:00
Linus Torvalds 8d15b0ec32 Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon: switch to using late_initcall
  radeon legacy chips: tv dac bg/dac adj updates
  drm/radeon: introduce kernel modesetting for radeon hardware
  drm: Add the TTM GPU memory manager subsystem.
  drm: Memory fragmentation from lost alignment blocks
  drm/radeon: fix mobility flags on new PCI IDs.
2009-06-16 21:20:39 -07:00
Jerome Glisse 771fe6b912 drm/radeon: introduce kernel modesetting for radeon hardware
Add kernel modesetting support to radeon driver, use the ttm memory
manager to manage memory and DRM/GEM to provide userspace API.
In order to avoid backward compatibility issue and to allow clean
design and code the radeon kernel modesetting use different code path
than old radeon/drm driver.

When kernel modesetting is enabled the IOCTL of radeon/drm
driver are considered as invalid and an error message is printed
in the log and they return failure.

KMS enabled userspace will use new API to talk with the radeon/drm
driver. The new API provide functions to create/destroy/share/mmap
buffer object which are then managed by the kernel memory manager
(here TTM). In order to submit command to the GPU the userspace
provide a buffer holding the command stream, along this buffer
userspace have to provide a list of buffer object used by the
command stream. The kernel radeon driver will then place buffer
in GPU accessible memory and will update command stream to reflect
the position of the different buffers.

The kernel will also perform security check on command stream
provided by the user, we want to catch and forbid any illegal use
of the GPU such as DMA into random system memory or into memory
not owned by the process supplying the command stream. This part
of the code is still incomplete and this why we propose that patch
as a staging driver addition, future security might forbid current
experimental userspace to run.

This code support the following hardware : R1XX,R2XX,R3XX,R4XX,R5XX
(radeon up to X1950). Works is underway to provide support for R6XX,
R7XX and newer hardware (radeon from HD2XXX to HD4XXX).

Authors:
    Jerome Glisse <jglisse@redhat.com>
    Dave Airlie <airlied@redhat.com>
    Alex Deucher <alexdeucher@gmail.com>

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-15 12:01:53 +10:00
Thomas Hellstrom ba4e7d973d drm: Add the TTM GPU memory manager subsystem.
TTM is a GPU memory manager subsystem designed for use with GPU
devices with various memory types (On-card VRAM, AGP,
PCI apertures etc.). It's essentially a helper library that assists
the DRM driver in creating and managing persistent buffer objects.

TTM manages placement of data and CPU map setup and teardown on
data movement. It can also optionally manage synchronization of
data on a per-buffer-object level.

TTM takes care to provide an always valid virtual user-space address
to a buffer object which makes user-space sub-allocation of
big buffer objects feasible.

TTM uses a fine-grained per buffer-object locking scheme, taking
care to release all relevant locks when waiting for the GPU.
Although this implies some locking overhead, it's probably a big
win for devices with multiple command submission mechanisms, since
the lock contention will be minimal.

TTM can be used with whatever user-space interface the driver
chooses, including GEM. It's used by the upcoming Radeon KMS DRM driver
and is also the GPU memory management core of various new experimental
DRM drivers.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-15 09:37:57 +10:00
Dave Airlie 602c11a8ee drm/radeon: fix mobility flags on new PCI IDs.
These aren't used that much on r600, but may be needed in the future,
so get them correct now.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-15 09:28:32 +10:00
Linus Torvalds 6b702462cb Merge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (50 commits)
  drm: include kernel list header file in hashtab header
  drm: Export hash table functionality.
  drm: Split out the mm declarations in a separate header. Add atomic operations.
  drm/radeon: add support for RV790.
  drm/radeon: add rv740 drm support.
  drm_calloc_large: check right size, check integer overflow, use GFP_ZERO
  drm: Eliminate magic I2C frobbing when reading EDID
  drm/i915: duplicate desired mode for use by fbcon.
  drm/via: vfree() no need checking before calling it
  drm: Replace DRM_DEBUG with DRM_DEBUG_DRIVER in i915 driver
  drm: Replace DRM_DEBUG with DRM_DEBUG_MODE in drm_mode
  drm/i915: Replace DRM_DEBUG with DRM_DEBUG_KMS in intel_sdvo
  drm/i915: replace DRM_DEBUG with DRM_DEBUG_KMS in intel_lvds
  drm: add separate drm debugging levels
  radeon: remove _DRM_DRIVER from the preadded sarea map
  drm: don't associate _DRM_DRIVER maps with a master
  drm: simplify kcalloc() call to kzalloc().
  intelfb: fix spelling of "CLOCK"
  drm: fix LOCK_TEST_WITH_RETURN macro
  drm/i915: Hook connector to encoder during load detection (fixes tv/vga detect)
  ...
2009-06-12 18:09:18 -07:00
Jerome Glisse 3c24475c1e drm: include kernel list header file in hashtab header
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-12 15:56:34 +10:00
Jerome Glisse 249d6048ca drm: Split out the mm declarations in a separate header. Add atomic operations.
this is a TTM preparation patch, it rearranges the mm and
add operations needed to do mm operations in atomic context.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-12 15:56:31 +10:00
Alex Deucher 715cbb05c9 drm/radeon: add support for RV790.
This adds the PCI IDs for the rv790 which are equiv to the rv770.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-12 15:56:30 +10:00
Alex Deucher 2a71ebcd85 drm/radeon: add rv740 drm support.
This adds drm support for the RV740 family of chips to the r600 support code.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-12 15:56:28 +10:00
Kristian Høgsberg fbe0efb869 drm_calloc_large: check right size, check integer overflow, use GFP_ZERO
Previously we would check size instead of size * nmemb, and so would
never hit the vmalloc path.  Also add integer overflow check as in kcalloc,
and allocate GFP_ZERO pages instead of memset()ing them.

Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-12 15:37:28 +10:00
yakui_zhao 4fefcb2705 drm: add separate drm debugging levels
Now all the DRM debug info will be reported if the boot option of
"drm.debug=1" is added. Sometimes it is inconvenient to get the debug
info in KMS mode. We will get too much unrelated info.

This will separate several DRM debug levels and the debug level can be used
to print the different debug info. And the debug level is controlled by the
module parameter of drm.debug

In this patch it is divided into four debug levels;
       	drm_core, drm_driver, drm_kms, drm_mode.

At the same time we can get the different debug info by changing the debug
level. This can be done by adding the module parameter. Of course it can
be changed through the /sys/module/drm/parameters/debug after the system is
booted.

Four debug macro definitions are provided.
	DRM_DEBUG(fmt, args...)
	DRM_DEBUG_DRIVER(prefix, fmt, args...)
	DRM_DEBUG_KMS(prefix, fmt, args...)
	DRM_DEBUG_MODE(prefix, fmt, args...)

When the boot option of "drm.debug=4" is added, it will print the debug info
using DRM_DEBUG_KMS macro definition.
When the boot option of "drm.debug=6" is added, it will print the debug info
using DRM_DEBUG_KMS/DRM_DEBUG_DRIVER.

Sometimes we expect to print the value of an array.
For example: SDVO command,
In such case the following four DRM debug macro definitions are added:
	DRM_LOG(fmt, args...)
	DRM_LOG_DRIVER(fmt, args...)
	DRM_LOG_KMS(fmt, args...)
	DRM_LOG_MODE(fmt, args...)

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-11 18:36:36 +10:00
Roel Kluin dcae3626d0 drm: fix LOCK_TEST_WITH_RETURN macro
When this macro isn't called with 'file_priv' this will result in a build
failure.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-11 16:10:27 +10:00
Zhenyu Wang 80a538e49d drm/i915: Enable probe on new chipset
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-06-09 11:15:40 -07:00
Keith Packard c9fb15f60e drm: Hook up DPMS property handling in drm_crtc.c. Add drm_helper_connector_dpms.
Making the drm_crtc.c code recognize the DPMS property and invoke the
connector->dpms function doesn't remove any capability from the driver while
reducing code duplication.

That just highlighted the problem with the existing DPMS functions which
could turn off the connector, but failed to turn off any relevant crtcs. The
new drm_helper_connector_dpms function manages all of that, using the
drm_helper-specific crtc and encoder dpms functions, automatically computing
the appropriate DPMS level for each object in the system.

This fixes the current troubles in the i915 driver which left PLLs, pipes
and planes running while in DPMS_OFF mode or even while they were unused.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-04 09:32:12 +10:00
Jesse Barnes 8e7d2b2c6e drm/i915: allocate large pointer arrays with vmalloc
For awhile now, many of the GEM code paths have allocated page or
object arrays with the slab allocator.  This is nice and fast, but
won't work well if memory is fragmented, since the slab allocator works
with physically contiguous memory (i.e. order > 2 allocations are
likely to fail fairly early after booting and doing some work).

This patch works around the issue by falling back to vmalloc for
>PAGE_SIZE allocations.  This is ugly, but much less work than chaining
a bunch of pages together by hand (suprisingly there's not a bunch of
generic kernel helpers for this yet afaik).  vmalloc space is somewhat
precious on 32 bit kernels, but our allocations shouldn't be big enough
to cause problems, though they're routinely more than a page.

Note that this patch doesn't address the unchecked
alloc-based-on-ioctl-args in GEM; that needs to be fixed in a separate
patch.

Also, I've deliberately ignored the DRM's "area" junk.  I don't think
anyone actually uses it anymore and I'm hoping it gets ripped out soon.

[Updated: removed size arg to new free function.  We could unify the
free functions as well once the DRM mem tracking is ripped out.]

fd.o bug #20152 (part 1/3)

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-05-19 10:07:14 -07:00
Carl Worth 08d7b3d1ed drm/i915: Add new GET_PIPE_FROM_CRTC_ID ioctl.
This allows userlevel code to discover the pipe number corresponding
to a given CRTC ID. This is necessary for doing pipe-specific
operations such as waiting for vblank on a given CRTC.  Failure to use
the right pipe mapping can result in GPU hangs, or at least failure
to actually sync to vblank.

Signed-off-by: Carl Worth <cworth@cworth.org>
[anholt: Style touchups from review]
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-05-14 16:00:32 -07:00
Zhenyu Wang 7202178867 drm/i915: add support for G41 chipset
This had been delayed for some time due to failure to work on the one piece
of G41 hardware we had, and lack of success reports from anybody else.
Current hardware appears to be OK.

Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com>
[anholt: hand-applied due to conflicts with IGD patches]
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-04-21 17:22:53 -07:00
Linus Torvalds b897e6fbc4 Merge branch 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel
* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
  drm/i915: fix scheduling while holding the new active list spinlock
  drm/i915: Allow tiling of objects with bit 17 swizzling by the CPU.
  drm/i915: Correctly set the write flag for get_user_pages in pread.
  drm/i915: Fix use of uninitialized var in 40a5f0de
  drm/i915: indicate framebuffer restore key in SysRq help message
  drm/i915: sync hdmi detection by hdmi identifier with 2D
  drm/i915: Fix a mismerge of the IGD patch (new .find_pll hooks missed)
  drm/i915: Implement batch and ring buffer dumping
2009-04-14 13:16:40 -07:00
Stefan Husemann 347486bb10 intelfb: support i854
Support the Intel 854 Chipset in fbdev.

We test and use the patch on a Thomson IP1101 IPTV-Box.  On the VGA-Port
we get a normal signal.

Here is the link to the Mambux-Project: http://www.mambux.de

Cc: Keith Packard <keithp@keithp.com>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Stefan Husemann <shusemann@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-13 15:04:32 -07:00
Eric Anholt 280b713b5b drm/i915: Allow tiling of objects with bit 17 swizzling by the CPU.
Save the bit 17 state of the pages when freeing the page list, and
reswizzle them if necessary when rebinding the pages (in case they were
swapped out).  Since we have userland with expectations that the swizzle
enums let it pread and pwrite contents accurately, we can't expose a new
swizzle enum for bit 17 (which it would have to GTT map to handle), so we
handle it down in pread and pwrite by swizzling the copy when bit 17 of the
page address is set.

Signed-off-by: Eric Anholt <eric@anholt.net>
2009-04-08 10:50:57 -07:00
Jesse Barnes 7a1fb5d06d drm: remove unused "can_grow" parameter from drm_crtc_helper_initial_config
Cleanup some leftovers from the X port.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-04-03 10:21:44 +10:00
Jean Delvare 3c6fc3521a DRM: drm_crtc_helper.h doesn't actually need i2c.h
Remove an include that isn't actually needed to prevent needless
rebuilds.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-04-03 09:08:25 +10:00
Dave Airlie 522b5cc7ce drm: fix missing inline function on 32-bit powerpc.
The readq/writeq really need to be static inline on the arches which
don't provide them.

Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-04-03 09:07:07 +10:00
Ma Ling f23c20c83d drm: detect hdmi monitor by hdmi identifier (v3)
Sometime we need to communicate with HDMI monitor by sending audio or video
info frame, so we have to know monitor type. However if user utilize HDMI-DVI adapter to connect DVI monitor, hardware detection will incorrectly show the monitor is HDMI. HDMI spec tell us that any device containing IEEE registration Identifier will be treated as HDMI device.  The patch intends to detect HDMI monitor by this rule.

Signed-off-by: Ma Ling <ling.ma@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-29 18:31:49 +10:00
Richard Kennedy c972d750e4 drm: reorder struct drm_ioctl_desc to save space on 64 bit builds
shrinks drm_ioctl_desc from 24 bytes to 16 bytes by reordering members
to remove padding.

updates DRM_IOCTL_DEF macro to initialise structure members by name to
handle the structure reorder.

The applied patch reduces data used in drm.ko from 10440 to 9032

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-29 18:31:45 +10:00
Alex Deucher 40fc6eab59 radeon: add some new pci ids
This adds some new RS780 pci ids

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-29 18:31:43 +10:00
Ma Ling 167f3a04d7 drm: read EDID extensions from monitor
Usually drm read basic EDID, that is enough for us, but since igital display
were introduced i.e. HDMI monitor, sometime we need to interact with monitor by
EDID extension information,

EDID extensions include audio/video data block, speaker allocation and vendor specific data blocks.

This patch intends to read EDID extensions from digital monitor for users.

Signed-off-by: Ma Ling <ling.ma@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-29 18:31:41 +10:00
Dave Airlie 90f959bcb3 drm: merge Linux master into HEAD
Conflicts:
	drivers/gpu/drm/drm_info.c
	drivers/gpu/drm/drm_proc.c
	drivers/gpu/drm/i915/i915_gem_debugfs.c
2009-03-28 20:22:18 -04:00
Shaohua Li 2177832f2e agp/intel: Add support for new intel chipset.
This is a G33-like desktop and mobile chipset.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-27 15:12:08 -07:00
Ben Gamari 28a62277e0 drm: Convert proc files to seq_file and introduce debugfs
The old mechanism to formatting proc files is extremely ugly. The
seq_file API was designed specifically for cases like this and greatly
simplifies the process.

Also, most of the files in /proc really don't belong there. This patch
introduces the infrastructure for putting these into debugfs and exposes
all of the proc files in debugfs as well.

Signed-off-by: Ben Gamari <bgamari@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-03-27 15:12:00 -07:00
Ingo Molnar 5a54bd1307 Merge commit 'v2.6.29' into core/header-fixes 2009-03-26 18:29:40 +01:00
Arnd Bergmann 1d7f83d5ad make drm headers use strict integer types
The drm headers are traditionally shared with BSD and
could not use the strict linux integer types. This is
over now, so we can use our own types now.

Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-26 18:14:18 +01:00
Dave Airlie 87f0da5535 drm: add DRM_READ/WRITE64 wrappers around readq/writeq.
The readq/writeq stuff is from Dave Miller, and he
warns users to be careful about using these. Plans are only
r600 to use it so far.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-13 14:24:14 +10:00
Alex Deucher 8ced9c7516 radeon: add RS600 pci ids
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-13 14:24:13 +10:00
Alex Deucher 7335aafa30 radeon: add R6xx/R7xx pci ids
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-13 14:24:12 +10:00
Alex Deucher befb73c232 drm/radeon: prep for r6xx/r7xx support
- add r6xx/r7xx regs and macros
- add r6xx/r7xx chip families
- fix register access for regs with offsets >= 0x10000

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-13 14:24:10 +10:00
Ben Gamari 955b12def4 drm: Convert proc files to seq_file and introduce debugfs
The old mechanism to formatting proc files is extremely ugly. The
seq_file API was designed specifically for cases like this and greatly
simplifies the process.

Also, most of the files in /proc really don't belong there. This patch
introduces the infrastructure for putting these into debugfs and exposes
all of the proc files in debugfs as well.

This contains the i915 hooks rewrite as well, to make bisectability better.

Signed-off-by: Ben Gamari <bgamari@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-13 14:24:07 +10:00
Kristian Høgsberg 8e1004580e drm: Drop unused and broken dri_library_name sysfs attribute.
The kernel shouldn't be in the business of telling user space which
driver to load.  The kernel defers mapping PCI IDs to module names
to user space and we should do the same for DRI drivers.

And in fact, that's how it does work today.  Nothing uses the
dri_library_name attribute, and the attribute is in fact broken.
For intel devices, it falls back to the default behaviour of returning
the kernel module name as the DRI driver name, which doesn't work for
i965 devices.  Nobody has ever hit this problem or filed a bug about this.

Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-03-13 14:23:58 +10:00
Kristian Høgsberg 112b715e8e drm: claim PCI device when running in modesetting mode.
Under kernel modesetting, we manage the device at all times, regardless
of VT switching and X servers, so the only decent thing to do is to
claim the PCI device.  In that case, we call the suspend/resume hooks
directly from the pci driver hooks instead of the current class device detour.

Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-03-13 14:23:58 +10:00
Benjamin Herrenschmidt 41c2e75e60 drm: Make drm_local_map use a resource_size_t offset
This changes drm_local_map to use a resource_size for its "offset"
member instead of an unsigned long, thus allowing 32-bit machines
with a >32-bit physical address space to be able to store there
their register or framebuffer addresses when those are above 4G,
such as when using a PCI video card on a recent AMCC 440 SoC.

This patch isn't as "trivial" as it sounds: A few functions needed
to have some unsigned long/int changed to resource_size_t and a few
printk's had to be adjusted.

But also, because userspace isn't capable of passing such offsets,
I had to modify drm_find_matching_map() to ignore the offset passed
in for maps of type _DRM_FRAMEBUFFER or _DRM_REGISTERS.

If we ever support multiple _DRM_FRAMEBUFFER or _DRM_REGISTERS maps
for a given device, we might have to change that trick, but I don't
think that happens on any current driver.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-03-13 14:23:57 +10:00
Benjamin Herrenschmidt f77d390c97 drm: Split drm_map and drm_local_map
Once upon a time, the DRM made the distinction between the drm_map
data structure exchanged with user space and the drm_local_map used
in the kernel.

For some reasons, while the BSD port still has that "feature", the
linux part abused drm_map for kernel internal usage as the local
map only existed as a typedef of the struct drm_map.

This patch fixes it by declaring struct drm_local_map separately
(though its content is currently identical to the userspace variant),
and changing the kernel code to only use that, except when it's a
user<->kernel interface (ie. ioctl).

This allows subsequent changes to the in-kernel format

I've also replaced the use of drm_local_map_t with struct drm_local_map
in a couple of places. Mostly by accident but they are the same (the
former is a typedef of the later) and I have some remote plans and
half finished patch to completely kill the drm_local_map_t typedef
so I left those bits in.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-03-13 14:23:56 +10:00
Benjamin Herrenschmidt d883f7f1b7 drm: Use resource_size_t for drm_get_resource_{start, len}
The DRM uses its own wrappers to obtain resources from PCI devices,
which currently convert the resource_size_t into an unsigned long.

This is broken on 32-bit platforms with >32-bit physical address
space.

This fixes them, along with a few occurences of unsigned long used
to store such a resource in drivers.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-03-13 14:23:56 +10:00
Pantelis Koukousoulas 260cf8a2cb drm: fix EDID parser problem with positive/negative hsync/vsync
Comparing the layouts of struct detail_pixel_timing with
x.org's struct detailed_timings and how those are handled,
it appears that the hsync_positive and vsync_positive
fields are backwards.

This patch fixes https://bugs.freedesktop.org/show_bug.cgi?id=20019
for me. It was tested on 2 monitors, LG FLATRON L225WS 22" and
a YAKUMO 17" for which more details are unknown.

Signed-off-by: Pantelis Koukousoulas <pktoss@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-11 12:18:48 +10:00
Jesse Barnes 7bec756c74 drm: disable encoders before re-routing them
In some cases we may receive a mode config that has a different
CRTC<->encoder map that the current configuration.  In that case, we
need to disable any re-routed encoders before setting the mode,
otherwise they may not pick up the new CRTC (if the output types are
incompatible for example).

Tested-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-25 14:42:23 +10:00
Jesse Barnes fe56cf45f9 drm: Fix ordering of bit fields in EDID structure leading huge vsync values.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-25 14:11:00 +10:00
Jesse Barnes ab00b3e521 drm/i915: Keep refs on the object over the lifetime of vmas for GTT mmap.
This fixes potential fault at fault time if the object was unreferenced
while the mapping still existed.  Now, while the mmap_offset only lives
for the lifetime of the object, the object also stays alive while a vma
exists that needs it.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-02-20 12:21:13 +10:00
Chris Wilson 5c3b82e2b2 drm: Propagate failure from setting crtc base.
Check the error paths within intel_pipe_set_base() to first cleanup and
then report back the error.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-20 12:21:12 +10:00
Kristian Høgsberg ea39f83516 drm: Release user fbs in drm_release
Avoids leaking fbs and associated buffers on release.

Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Tested-by: Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-20 12:21:11 +10:00
Jesse Barnes 0f973f2788 drm/i915: add fence register management to execbuf
Adds code to set up fence registers at execbuf time on pre-965 chips as
necessary.  Also fixes up a few bugs in the pre-965 tile register support
(get_order != ffs).  The number of fences available to the kernel defaults
to the hw limit minus 3 (for legacy X front/back/depth), but a new parameter
allows userspace to override that as needed.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-02-08 21:38:02 +10:00
Eric Anholt 30b2363408 drm: Rip out the racy, unused vblank signal code.
Schedule a vblank signal, kill the process, and we'll go walking over freed
memory.  Given that no open-source userland exists using this, nor have I
ever heard of a consumer, just let this code die.

Signed-off-by: Eric Anholt <eric@anholt.net>
Requested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-28 07:50:14 -08:00
Jesse Barnes ad2563c2e4 drm: create mode_config idr lock
Create a separate mode_config IDR lock for simplicity.  The core DRM
config structures (connector, mode, etc. lists) are still protected by
the mode_config mutex, but the CRTC IDR (used for the various identifier
IDs) is now protected by the mode_config idr_mutex.  Simplifies the
locking a bit and removes a warning.

All objects are protected by the config mutex, we may in the future,
split the object further to have reference counts.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-01-22 17:53:05 +10:00
Jesse Barnes 40a518d9f1 drm: initial KMS config fixes
When mode setting is first initialized, the driver will call into
drm_helper_initial_config() to set up an initial output and framebuffer
configuration.  This routine is responsible for probing the available
connectors, encoders, and crtcs, looking for modes and putting together
something reasonable (where reasonable is defined as "allows kernel
messages to be visible on as many displays as possible").

However, the code was a bit too aggressive in setting default modes when
none were found on a given connector.  Even if some connectors had modes,
any connectors found lacking modes would have the default 800x600 mode added
to their mode list, which in some cases could cause problems later down the
line.  In my case, the LVDS was perfectly available, but the initial config
code added 800x600 modes to both of the detected but unavailable HDMI
connectors (which are on my non-existent docking station).  This ended up
preventing later code from setting a mode on my LVDS, which is bad.

This patch fixes that behavior by making the initial config code walk
through the connectors first, counting the available modes, before it decides
to add any default modes to a possibly connected output.  It also fixes the
logic in drm_target_preferred() that was causing zeroed out modes to be set
as the preferred mode for a given connector, even if no modes were available.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-01-16 18:40:54 +10:00
Eric Anholt fede5c91c4 drm: Add a debug node for vblank state.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-12-29 17:47:27 +10:00
Kristian Høgsberg 3c4fdcfb29 drm: pin new and unpin old buffer when setting a mode.
This removes the requirement for user space to pin a buffer before
setting a mode that is backed by the pixels from that buffer.

Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-12-29 17:47:27 +10:00
Eric Anholt 8d391aa410 drm/i915: Add missing userland definitions for gem init/execbuffer.
fdo bug #19132.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29 17:47:25 +10:00
Dave Airlie dfef245922 i915/drm: provide compat defines for userspace for certain struct members.
Painfully userspace started using new names that were never actually to be
used from the external repo.

Also fill out the gaps in the structure for old/new userspace compat

Add compat defines for these structs.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29 17:47:25 +10:00
Kristian H�gsberg 0c7c266475 drm: drop DRM_IOCTL_MODE_REPLACEFB, add+remove works just as well.
The replace fb ioctl replaces the backing buffer object for a modesetting
framebuffer object.  This can be acheived by just creating a new
framebuffer backed by the new buffer object, setting that for the crtcs
in question and then removing the old framebuffer object.

Signed-off-by: Kristian Hogsberg <krh@redhat.com>
Acked-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29 17:47:25 +10:00
Jakob Bornecrantz e0c8463a8b drm: sanitise drm modesetting API + remove unused hotplug
The initially merged modesetting API has some uglies in it, this
cleans up the struct members and ioctl ordering for initial submission.

It also removes the unneeded hotplug infrastructure.

airlied:- I've pulled this patch in from git modesetting-gem tree.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29 17:47:25 +10:00
Jesse Barnes 79e539453b DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported.  HDMI, DisplayPort and additional SDVO output support will
follow.

Support for the mode setting code is controlled by the new 'modeset'
module option.  A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.

Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing.  So use caution when
enabling this code; be sure your user level code supports the new
interfaces.

A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.

Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29 17:47:23 +10:00
Dave Airlie f453ba0460 DRM: add mode setting support
Add mode setting support to the DRM layer.

This is a fairly big chunk of work that allows DRM drivers to provide
full output control and configuration capabilities to userspace.  It was
motivated by several factors:
  - the fb layer's APIs aren't suited for anything but simple
    configurations
  - coordination between the fb layer, DRM layer, and various userspace
    drivers is poor to non-existent (radeonfb excepted)
  - user level mode setting drivers makes displaying panic & oops
    messages more difficult
  - suspend/resume of graphics state is possible in many more
    configurations with kernel level support

This commit just adds the core DRM part of the mode setting APIs.
Driver specific commits using these new structure and APIs will follow.

Co-authors: Jesse Barnes <jbarnes@virtuousgeek.org>, Jakob Bornecrantz <jakob@tungstengraphics.com>
Contributors: Alan Hourihane <alanh@tungstengraphics.com>, Maarten Maathuis <madman2003@gmail.com>

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29 17:47:23 +10:00
Jesse Barnes de151cf67c drm/i915: add GEM GTT mapping support
Use the new core GEM object mapping code to allow GTT mapping of GEM
objects on i915.  The fault handler will make sure a fence register is
allocated too, if the object in question is tiled.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29 17:47:23 +10:00
Jesse Barnes a2c0a97b78 drm: GEM mmap support
Add core support for mapping of GEM objects.  Drivers should provide a
vm_operations_struct if they want to support page faulting of objects.
The code for handling GEM object offsets was taken from TTM, which was
written by Thomas Hellström.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29 17:47:22 +10:00
Vegard Nossum 1147c9cdd0 drm: fix leak of uninitialized data to userspace
...so drm_getunique() is trying to copy some uninitialized data to
userspace. The ECX register contains the number of words that are
left to copy -- so there are 5 * 4 = 20 bytes left. The offset of the
first uninitialized byte (counting from the start of the string) is
also 20 (i.e. 0xf65d2294&((1 << 5)-1) == 20). So somebody tried to
copy 40 bytes when the string was only 19 long.

In drm_set_busid() we have this code:

        dev->unique_len = 40;
        dev->unique = drm_alloc(dev->unique_len + 1, DRM_MEM_DRIVER);
      ...
        len = snprintf(dev->unique, dev->unique_len, pci:%04x:%02x:%02x.%d",

...so it seems that dev->unique is never updated to reflect the
actual length of the string. The remaining bytes (20 in this case)
are random uninitialized bytes that are copied into userspace.

This patch fixes the problem by setting dev->unique_len after the
snprintf().

airlied- I've had to fix this up to store the alloced size so
we have it for drm_free later.

Reported-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Vegard Nossum <vegardno@thuin.ifi.uio.no>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29 17:47:22 +10:00
Dave Airlie 7c1c2871a6 drm: move to kref per-master structures.
This is step one towards having multiple masters sharing a drm
device in order to get fast-user-switching to work.

It splits out the information associated with the drm master
into a separate kref counted structure, and allocates this when
a master opens the device node. It also allows the current master
to abdicate (say while VT switched), and a new master to take over
the hardware.

It moves the Intel and radeon drivers to using the sarea from
within the new master structures.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29 17:47:22 +10:00
Dave Airlie e7f7ab45eb drm: cleanup exit path for module unload
The current sub-module unload exit path is a mess, it tries
to abuse the idr. Just keep a list of devices per driver struct
and free them in-order on rmmod.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-29 17:47:21 +10:00
Keith Packard 52440211dc drm: move drm vblank initialization/cleanup to driver load/unload
drm vblank initialization keeps track of the changes in driver-supplied
frame counts across vt switch and mode setting, but only if you let it by
not tearing down the drm vblank structure.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-25 09:49:03 +10:00
Dave Airlie afa21e0584 drm/i915: Filter pci devices based on PCI_CLASS_DISPLAY_VGA
This fixes hangs on 855-class hardware by avoiding double attachment of the
driver due to the stub second head device having the same pci id as the real
device.

Other DRM drivers probably want this treatment as well, but I'm applying it
just to this one for safety. But we should clean up the drm_pciids.h mess
now so that each driver has its own pci id list header in its own directory.
Lets do that in the next release.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-11 18:02:12 +10:00
Eric Anholt 5d8e6bb7a2 drm: Remove infrastructure for supporting i915's vblank swapping.
It's not used in any other drivers, and doesn't look like it will be from
drm.git master.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-11-11 17:44:26 +10:00
Eric Anholt 5a125c3c79 i915: Add GEM ioctl to get available aperture size.
This will let userland know when to submit its batchbuffers, before they get
too big to fit in the aperture.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-03 10:56:49 +10:00
Alex Deucher edc6f389f6 radeon: fix PCI bus mastering support enables.
Someone noticed these registers moved around for later chips,
so we redo the codepaths per-chip. PCIE chips don't appear to
require explicit enables.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18 07:10:54 +10:00
Alex Deucher b2ceddfa52 radeon: add RS400 family support.
This adds support for the RS400 family of IGPs for Intel CPUs.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18 07:10:54 +10:00
Alex Deucher f0738e9240 drm/radeon: add support for RS740 IGP chipsets.
This adds support for the HS2100 IGP chipset.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18 07:10:54 +10:00
Keith Packard ba1eb1d825 i915: Map status page cached for chips with GTT-based HWS location.
This should improve performance by avoiding uncached reads by the CPU (the
point of having a status page), and may improve stability.  This patch only
affects G33, GM45 and G45 chips as those are the only ones using GTT-based
HWS mappings.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18 07:10:53 +10:00
Jesse Barnes 9bfbd5cb72 drm: kill drm_device->irq
Like the last patch but adds a macro to get at the irq value instead of
dereferencing pdev directly.  Should  make things easier for the BSD guys and
if we ever support non-PCI devices.

Signed-off-by:  Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18 07:10:53 +10:00
Kristian Høgsberg dbb19d302b i915 gem: install and uninstall irq handler in entervt and leavevt ioctls.
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18 07:10:52 +10:00
Kristian Høgsberg ed4c9c4acf i915: Add chip set ID param.
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18 07:10:12 +10:00
Eric Anholt 673a394b1e drm: Add GEM ("graphics execution manager") to i915 driver.
GEM allows the creation of persistent buffer objects accessible by the
graphics device through new ioctls for managing execution of commands on the
device.  The userland API is almost entirely driver-specific to ensure that
any driver building on this model can easily map the interface to individual
driver requirements.

GEM is used by the 2d driver for managing its internal state allocations and
will be used for pixmap storage to reduce memory consumption and enable
zero-copy GLX_EXT_texture_from_pixmap, and in the 3d driver is used to enable
GL_EXT_framebuffer_object and GL_ARB_pixel_buffer_object.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18 07:10:12 +10:00
Jesse Barnes 0a3e67a4ca drm: Rework vblank-wait handling to allow interrupt reduction.
Previously, drivers supporting vblank interrupt waits would run the interrupt
all the time, or all the time that any 3d client was running, preventing the
CPU from sleeping for long when the system was otherwise idle.  Now, interrupts
are disabled any time that no client is waiting on a vblank event. The new
method uses vblank counters on the chipsets when the interrupts are turned
off, rather than counting interrupts, so that we can continue to present
accurate vblank numbers.

Co-author: Michel Dänzer <michel@tungstengraphics.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18 07:10:11 +10:00
Carlos R. Mafra ddb7f4cb81 drm: remove #define's for non-linux systems
There is no point in considering FreeBSD et al.  in the linux kernel
source code.

Signed-off-by: Carlos R. Mafra <crmafra@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-10-18 07:10:09 +10:00
Dave Airlie 242e3df80b drm/radeon: fixup issue with radeon and PAT support.
With new userspace libpciaccess we can get a conflicting mapping
on the PCIE GART table in the video RAM. Always try and map it _wc.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-15 15:48:05 +10:00
Dave Airlie c0e09200dc drm: reorganise drm tree to be more future proof.
With the coming of kernel based modesetting and the memory manager stuff,
the everything in one directory approach was getting very ugly and
starting to be unmanageable.

This restructures the drm along the lines of other kernel components.

It creates a drivers/gpu/drm directory and moves the hw drivers into
subdirectores. It moves the includes into an include/drm, and
sets up the unifdef for the userspace headers we should be exporting.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-14 10:45:01 +10:00