Use a flags argument with the XFS_DABUF_MAP_HOLE_OK flag to signal that
a hole is okay and not corruption, and return 0 with *nmap set to 0 to
signal that case in the return value instead of a nameless -1 return
code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Merge xfs_buf_map_from_irec and xfs_da_map_covers_blocks into a single
loop in the caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Shortcut the creation of xfs_bmbt_irec and xfs_buf_map for the case
where the callers passed an already mapped xfs_daddr_t. This is in
preparation for splitting these cases out entirely later. Also reject
the mappedbno case for xfs_da_reada_buf as no callers currently uses
it and it will be removed soon.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
While we wait for queue to finish draining, use completions instead of
usleep_range(). This is better way of waiting for event.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We are sending whole of virtio_fs_forget struct to the other end over
virtqueue. Other end does not need to see elements like "struct list".
That's internal detail of guest kernel. Fix it.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Currently we are duplicating logic to send forgets at two
places. Consolidate the code by calling one helper function.
This also uses virtqueue_add_outbuf() instead of
virtqueue_add_sgs(). Former is simpler to call.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes gcc '-Wunused-but-set-variable' warning:
fs/afs/server.c: In function afs_install_server:
fs/afs/server.c:157:6: warning: variable ret set but not used [-Wunused-but-set-variable]
It is not used since commit d2ddc776a4 ("afs:
Overhaul volume and server record caching and fileserver rotation")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Fixes gcc '-Wunused-but-set-variable' warning:
fs/afs/dir_edit.c: In function afs_set_contig_bits:
fs/afs/dir_edit.c:75:20: warning: variable after set but not used [-Wunused-but-set-variable]
fs/afs/dir_edit.c: In function afs_set_contig_bits:
fs/afs/dir_edit.c:75:12: warning: variable before set but not used [-Wunused-but-set-variable]
fs/afs/dir_edit.c: In function afs_clear_contig_bits:
fs/afs/dir_edit.c💯20: warning: variable after set but not used [-Wunused-but-set-variable]
fs/afs/dir_edit.c: In function afs_clear_contig_bits:
fs/afs/dir_edit.c💯12: warning: variable before set but not used [-Wunused-but-set-variable]
They are never used since commit 63a4681ff3.
Fixes: 63a4681ff3 ("afs: Locally edit directory data for mkdir/create/unlink/...")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Before this patch, when a node withdrew a gfs2 file system, it
wrote a (clean) unmount log header. That's wrong. You don't want
to write anything to the journal once you're withdrawn because
that's acknowledging that the transaction is complete and the
journal is in good shape, neither of which may be a valid
assumption when the file system is withdrawn. This is especially
true if the withdraw was caused due to io errors writing to the
journal in the first place. The best course of action is to leave
the journal "as is" until it may be safely replayed during
journal recovery, regardless of whether it's done by this node or
another.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
In gfs2_create_inode, gfs2_set_inode_blocks is called twice for no good reason.
Remove the unnecessary call.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
sprintf and snprintf are fragile in future maintenance, switch to
using scnprintf to ensure no accidental Use After Free conditions
are introduced.
Signed-off-by: Mark Salyzyn <salyzyn@android.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Cc: David Howells <dhowells@redhat.com>
Cc: linux-afs@lists.infradead.org
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: David Howells <dhowells@redhat.com>
Change the name of call->iter to call->def_iter to represent the default
iterator.
Change the name of call->_iter to call->iter to represent the iterator
actually being used.
Signed-off-by: David Howells <dhowells@redhat.com>
Use call->_iter not &call->iter in debugging statements as the latter is a
convenience iter whereas the former represents we're actually doing at the
moment.
Signed-off-by: David Howells <dhowells@redhat.com>
Now that we can read also user and guest time safely under vtime, use
the relevant accessor to fix frozen kcpustat values on nohz_full CPUs.
Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wanpeng Li <wanpengli@tencent.com>
Link: https://lkml.kernel.org/r/20191121024430.19938-4-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
mm_release() contains the futex exit handling. mm_release() is called from
do_exit()->exit_mm() and from exec()->exec_mm().
In the exit_mm() case PF_EXITING and the futex state is updated. In the
exec_mm() case these states are not touched.
As the futex exit code needs further protections against exit races, this
needs to be split into two functions.
Preparatory only, no functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20191106224556.240518241@linutronix.de
An error in e333f3bbef left the nfsd_acl_program->pg_vers array empty,
which effectively turned off the server's support for NFSv3 ACLs.
Fixes: e333f3bbef "nfsd: Allow containers to set supported nfs versions"
Cc: stable@vger.kernel.org
Cc: Trond Myklebust <trondmy@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The FS got stuck in the below stack when the storage is almost
full/dirty condition (when FG_GC is being done).
schedule_timeout
io_schedule_timeout
congestion_wait
f2fs_drop_inmem_pages_all
f2fs_gc
f2fs_balance_fs
__write_node_page
f2fs_fsync_node_pages
f2fs_do_sync_file
f2fs_ioctl
The root cause for this issue is there is a potential infinite loop
in f2fs_drop_inmem_pages_all() for the case where gc_failure is true
and when there an inode whose i_gc_failures[GC_FAILURE_ATOMIC] is
not set. Fix this by keeping track of the total atomic files
currently opened and using that to exit from this condition.
Fix-suggested-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Eric mentioned, bare printk{,_ratelimited} won't show which
filesystem instance these message is coming from, this patch tries
to show fs instance with sb->s_id field in all places we missed
before.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In afs_wait_for_call_to_complete(), rather than immediately aborting an
operation if a signal occurs, the code attempts to wait for it to
complete, using a schedule timeout of 2*RTT (or min 2 jiffies) and a
check that we're still receiving relevant packets from the server before
we consider aborting the call. We may even ping the server to check on
the status of the call.
However, there's a missing timeout reset in the event that we do
actually get a packet to process, such that if we then get a couple of
short stalls, we then time out when progress is actually being made.
Fix this by resetting the timeout any time we get something to process.
If it's the failure of the call then the call state will get changed and
we'll exit the loop shortly thereafter.
A symptom of this is data fetches and stores failing with EINTR when
they really shouldn't.
Fixes: bc5e3a546d ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Before this patch, gfs2_create_inode had a use-after-free for the
iopen glock in some error paths because it did this:
gfs2_glock_put(io_gl);
fail_gunlock2:
if (io_gl)
clear_bit(GLF_INODE_CREATING, &io_gl->gl_flags);
In some cases, the io_gl was used for create and only had one
reference, so the glock might be freed before the clear_bit().
This patch tries to straighten it out by only jumping to the
error paths where iopen is properly set, and moving the
gfs2_glock_put after the clear_bit.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
If the file system is corrupted such that a file's i_links_count is
too small, then it's possible that when unlinking that file, i_nlink
will already be zero. Previously we were working around this kind of
corruption by forcing i_nlink to one; but we were doing this before
trying to delete the directory entry --- and if the file system is
corrupted enough that ext4_delete_entry() fails, then we exit with
i_nlink elevated, and this causes the orphan inode list handling to be
FUBAR'ed, such that when we unmount the file system, the orphan inode
list can get corrupted.
A better way to fix this is to simply skip trying to call drop_nlink()
if i_nlink is already zero, thus moving the check to the place where
it makes the most sense.
https://bugzilla.kernel.org/show_bug.cgi?id=205433
Link: https://lore.kernel.org/r/20191112032903.8828-1-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
After previous patches removing bdev being passed around to set it to
bio, it has become unused in submit_extent_page. So it now has "only" 13
parameters.
Signed-off-by: David Sterba <dsterba@suse.com>
We can now remove the bdev from extent_map. Previous patches made sure
that bio_set_dev is correctly in all places and that we don't need to
grab it from latest_bdev or pass it around inside the extent map.
Signed-off-by: David Sterba <dsterba@suse.com>
bio_set_dev sets a bdev to a bio and is not only setting a pointer bug
also changing some state bits if there was a different bdev set before.
This is one thing that's not needed.
Another thing is that setting a bdev at bio allocation time is too early
and actually does not work with plain redundancy profiles, where each
time we submit a bio to a device, the bdev is set correctly.
In many places the bio bdev is set to latest_bdev that seems to serve as
a stub pointer "just to put something to bio". But we don't have to do
that.
Where do we know which bdev to set:
* for regular IO: submit_stripe_bio that's called by btrfs_map_bio
* repair IO: repair_io_failure, read or write from specific device
* super block write (using buffer_heads but uses raw bdev) and barriers
* scrub: this does not use all regular IO paths as it needs to reach all
copies, verify and fixup eventually, and for that all bdev management
is independent
* raid56: rbio_add_io_page, for the RMW write
* integrity-checker: does it's own low-level block tracking
Signed-off-by: David Sterba <dsterba@suse.com>
This is preparatory patch to remove @bdev parameter from
submit_extent_page. It can't be removed completely, because the cgroups
need it for wbc when initializing the bio
wbc_init_bio
bio_associate_blkg_from_css
dereference bdev->bi_disk->queue
The bdev pointer is the same as latest_bdev, thus no functional change.
We can retrieve it from fs_devices that's reachable through several
dereferences. The local variable shadows the parameter, but that's only
temporary.
Signed-off-by: David Sterba <dsterba@suse.com>
Testing with the new fsstress support for subvolumes uncovered a pretty
bad problem with rename exchange on subvolumes. We're modifying two
different subvolumes, but we only start the transaction on one of them,
so the other one is not added to the dirty root list. This is caught by
btrfs_cow_block() with a warning because the root has not been updated,
however if we do not modify this root again we'll end up pointing at an
invalid root because the root item is never updated.
Fix this by making sure we add the destination root to the trans list,
the same as we do with normal renames. This fixes the corruption.
Fixes: cdd1fedf82 ("btrfs: add support for RENAME_EXCHANGE and RENAME_WHITEOUT")
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When doing a device replace, while at scrub.c:scrub_enumerate_chunks(), we
set the block group to RO mode and then wait for any ongoing writes into
extents of the block group to complete. While doing that wait we overwrite
the value of the variable 'ret' and can break out of the loop if an error
happens without turning the block group back into RW mode. So what happens
is the following:
1) btrfs_inc_block_group_ro() returns 0, meaning it set the block group
to RO mode (its ->ro field set to 1 or incremented to some value > 1);
2) Then btrfs_wait_ordered_roots() returns a value > 0;
3) Then if either joining or committing the transaction fails, we break
out of the loop wihtout calling btrfs_dec_block_group_ro(), leaving
the block group in RO mode forever.
To fix this, just remove the code that waits for ongoing writes to extents
of the block group, since it's not needed because in the initial setup
phase of a device replace operation, before starting to find all chunks
and their extents, we set the target device for replace while holding
fs_info->dev_replace->rwsem, which ensures that after releasing that
semaphore, any writes into the source device are made to the target device
as well (__btrfs_map_block() guarantees that). So while at
scrub_enumerate_chunks() we only need to worry about finding and copying
extents (from the source device to the target device) that were written
before we started the device replace operation.
Fixes: f0e9b7d640 ("Btrfs: fix race setting block group readonly during device replace")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When running btrfs/072 with only one online CPU, it has a pretty high
chance to fail:
btrfs/072 12s ... _check_dmesg: something found in dmesg (see xfstests-dev/results//btrfs/072.dmesg)
- output mismatch (see xfstests-dev/results//btrfs/072.out.bad)
--- tests/btrfs/072.out 2019-10-22 15:18:14.008965340 +0800
+++ /xfstests-dev/results//btrfs/072.out.bad 2019-11-14 15:56:45.877152240 +0800
@@ -1,2 +1,3 @@
QA output created by 072
Silence is golden
+Scrub find errors in "-m dup -d single" test
...
And with the following call trace:
BTRFS info (device dm-5): scrub: started on devid 1
------------[ cut here ]------------
BTRFS: Transaction aborted (error -27)
WARNING: CPU: 0 PID: 55087 at fs/btrfs/block-group.c:1890 btrfs_create_pending_block_groups+0x3e6/0x470 [btrfs]
CPU: 0 PID: 55087 Comm: btrfs Tainted: G W O 5.4.0-rc1-custom+ #13
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:btrfs_create_pending_block_groups+0x3e6/0x470 [btrfs]
Call Trace:
__btrfs_end_transaction+0xdb/0x310 [btrfs]
btrfs_end_transaction+0x10/0x20 [btrfs]
btrfs_inc_block_group_ro+0x1c9/0x210 [btrfs]
scrub_enumerate_chunks+0x264/0x940 [btrfs]
btrfs_scrub_dev+0x45c/0x8f0 [btrfs]
btrfs_ioctl+0x31a1/0x3fb0 [btrfs]
do_vfs_ioctl+0x636/0xaa0
ksys_ioctl+0x67/0x90
__x64_sys_ioctl+0x43/0x50
do_syscall_64+0x79/0xe0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
---[ end trace 166c865cec7688e7 ]---
[CAUSE]
The error number -27 is -EFBIG, returned from the following call chain:
btrfs_end_transaction()
|- __btrfs_end_transaction()
|- btrfs_create_pending_block_groups()
|- btrfs_finish_chunk_alloc()
|- btrfs_add_system_chunk()
This happens because we have used up all space of
btrfs_super_block::sys_chunk_array.
The root cause is, we have the following bad loop of creating tons of
system chunks:
1. The only SYSTEM chunk is being scrubbed
It's very common to have only one SYSTEM chunk.
2. New SYSTEM bg will be allocated
As btrfs_inc_block_group_ro() will check if we have enough space
after marking current bg RO. If not, then allocate a new chunk.
3. New SYSTEM bg is still empty, will be reclaimed
During the reclaim, we will mark it RO again.
4. That newly allocated empty SYSTEM bg get scrubbed
We go back to step 2, as the bg is already mark RO but still not
cleaned up yet.
If the cleaner kthread doesn't get executed fast enough (e.g. only one
CPU), then we will get more and more empty SYSTEM chunks, using up all
the space of btrfs_super_block::sys_chunk_array.
[FIX]
Since scrub/dev-replace doesn't always need to allocate new extent,
especially chunk tree extent, so we don't really need to do chunk
pre-allocation.
To break above spiral, here we introduce a new parameter to
btrfs_inc_block_group(), @do_chunk_alloc, which indicates whether we
need extra chunk pre-allocation.
For relocation, we pass @do_chunk_alloc=true, while for scrub, we pass
@do_chunk_alloc=false.
This should keep unnecessary empty chunks from popping up for scrub.
Also, since there are two parameters for btrfs_inc_block_group_ro(),
add more comment for it.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
struct btrfs_fs_devices::rotating currently is declared as an integer
variable but only used as a boolean.
Change the variable definition to bool and update to code touching it to
set 'true' and 'false'.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
struct btrfs_fs_devices::seeding currently is declared as an integer
variable but only used as a boolean.
Change the variable definition to bool and update to code touching it to
set 'true' and 'false'.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The type name is misleading, a single entry is named 'cache' while this
normally means a collection of objects. Rename that everywhere. Also the
identifier was quite long, making function prototypes harder to format.
Suggested-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For read_one_block_group(), its only caller has already got the item key
to search next block group item.
So we can use that key directly without doing our own convertion on
stack.
Also, since that key used in btrfs_read_block_groups() is vital for
block group item search, add 'const' keyword for that parameter to
prevent read_one_block_group() to modify it.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Refactor the work inside the loop of btrfs_read_block_groups() into one
separate function, read_one_block_group().
This allows read_one_block_group to be reused for later BG_TREE feature.
The refactor does the following extra fix:
- Use btrfs_fs_incompat() to replace open-coded feature check
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A nice writeup of the LKMM (Linux Kernel Memory Model) rules for access
once policies can be found here
https://lwn.net/Articles/799218/#Access-Marking%20Policies .
The locked and unlocked access to eb::blocking_writers should be
annotated accordingly, following this:
Writes:
- locked write must use ONCE, may use plain read
- unlocked write must use ONCE
Reads:
- unlocked read must use ONCE
- locked read may use plain read iff not mixed with unlocked read
- unlocked read then locked must use ONCE
There's one difference on the assembly level, where
btrfs_tree_read_lock_atomic and btrfs_try_tree_read_lock used the cached
value and did not reevaluate it after taking the lock. This could have
missed some opportunities to take the lock in case blocking writers
changed between the calls, but the window is just a few instructions
long. As this is in try-lock, the callers handle that.
Signed-off-by: David Sterba <dsterba@suse.com>
The increment and decrement was inherited from previous version that
used atomics, switched in commit 06297d8cef ("btrfs: switch
extent_buffer blocking_writers from atomic to int"). The only possible
values are 0 and 1 so we can set them directly.
The generated assembly (gcc 9.x) did the direct value assignment in
btrfs_set_lock_blocking_write (asm diff after change in 06297d8cef):
5d: test %eax,%eax
5f: je 62 <btrfs_set_lock_blocking_write+0x22>
61: retq
- 62: lock incl 0x44(%rdi)
- 66: add $0x50,%rdi
- 6a: jmpq 6f <btrfs_set_lock_blocking_write+0x2f>
+ 62: movl $0x1,0x44(%rdi)
+ 69: add $0x50,%rdi
+ 6d: jmpq 72 <btrfs_set_lock_blocking_write+0x32>
The part in btrfs_tree_unlock did a decrement because
BUG_ON(blockers > 1) is probably not a strong hint for the compiler, but
otherwise the output looks safe:
- lock decl 0x44(%rdi)
+ sub $0x1,%eax
+ mov %eax,0x44(%rdi)
Signed-off-by: David Sterba <dsterba@suse.com>
There are two ifs that use eb::blocking_writers. As this is a variable
modified inside and outside of locks, we could minimize number of
accesses to avoid problems with getting different results at different
times.
The access here is locked so this can only race with btrfs_tree_unlock
that sets blocking_writers to 0 without lock and unsets the lock owner.
The first branch is taken only if the same thread already holds the
lock, the second if checks for blocking writers. Here we'd either unlock
and wait, or proceed. Both are valid states of the locking protocol.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
When there are no raid1c3 or raid1c4 block groups left after balance
(either convert or with other filters applied), remove the incompat bit.
This is already done for RAID56, do the same for RAID1C34.
Signed-off-by: David Sterba <dsterba@suse.com>
The new raid1c3 and raid1c4 profiles are backward incompatible and the
name shall be 'raid1c34', the status can be found in the global
supported features in /sys/fs/btrfs/features or in the per-filesystem
directory.
Signed-off-by: David Sterba <dsterba@suse.com>
Add new block group profile to store 4 copies in a simliar way that
current RAID1 does. The profile attributes and constraints are defined
in the raid table and used by the same code that already handles the 2-
and 3-copy RAID1.
The minimum number of devices is 4, the maximum number of devices/chunks
that can be lost/damaged is 3. There is no comparable traditional RAID
level, the profile is added for future needs to accompany triple-parity
and beyond.
Signed-off-by: David Sterba <dsterba@suse.com>
Add new block group profile to store 3 copies in a simliar way that
current RAID1 does. The profile attributes and constraints are defined
in the raid table and used by the same code that already handles the
2-copy RAID1.
The minimum number of devices is 3, the maximum number of devices/chunks
that can be lost/damaged is 2. Like RAID6 but with 33% space
utilization.
Signed-off-by: David Sterba <dsterba@suse.com>
In commit "Btrfs: use REQ_CGROUP_PUNT for worker thread submitted bios",
cow_file_range_async gained wbc as a parameter and this makes passing
write flags redundant. Set it inside the function and remove the
parameter.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
__extent_writepage reads write flags from wbc and passes both to
__extent_writepage_io. This makes write_flags redundant and we can
remove it.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Backreference walking, which is used by send to figure if it can issue
clone operations instead of write operations, can be very slow and use
too much memory when extents have many references. This change simply
skips backreference walking when an extent has more than 64 references,
in which case we fallback to a write operation instead of a clone
operation. This limit is conservative and in practice I observed no
signicant slowdown with up to 100 references and still low memory usage
up to that limit.
This is a temporary workaround until there are speedups in the backref
walking code, and as such it does not attempt to add extra interfaces or
knobs to tweak the threshold.
Reported-by: Atemu <atemu.main@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAE4GHgkvqVADtS4AzcQJxo0Q1jKQgKaW3JGp3SGdoinVo=C9eQ@mail.gmail.com/T/#me55dc0987f9cc2acaa54372ce0492c65782be3fa
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For send we currently skip clone operations when the source and
destination files are the same. This is so because clone didn't support
this case in its early days, but support for it was added back in May
2013 by commit a96fbc7288 ("Btrfs: allow file data clone within a
file"). This change adds support for it.
Example:
$ mkfs.btrfs -f /dev/sdd
$ mount /dev/sdd /mnt/sdd
$ xfs_io -f -c "pwrite -S 0xab -b 64K 0 64K" /mnt/sdd/foobar
$ xfs_io -c "reflink /mnt/sdd/foobar 0 64K 64K" /mnt/sdd/foobar
$ btrfs subvolume snapshot -r /mnt/sdd /mnt/sdd/snap
$ mkfs.btrfs -f /dev/sde
$ mount /dev/sde /mnt/sde
$ btrfs send /mnt/sdd/snap | btrfs receive /mnt/sde
Without this change file foobar at the destination has a single 128Kb
extent:
$ filefrag -v /mnt/sde/snap/foobar
Filesystem type is: 9123683e
File size of /mnt/sde/snap/foobar is 131072 (32 blocks of 4096 bytes)
ext: logical_offset: physical_offset: length: expected: flags:
0: 0.. 31: 0.. 31: 32: last,unknown_loc,delalloc,eof
/mnt/sde/snap/foobar: 1 extent found
With this we get a single 64Kb extent that is shared at file offsets 0
and 64K, just like in the source filesystem:
$ filefrag -v /mnt/sde/snap/foobar
Filesystem type is: 9123683e
File size of /mnt/sde/snap/foobar is 131072 (32 blocks of 4096 bytes)
ext: logical_offset: physical_offset: length: expected: flags:
0: 0.. 15: 3328.. 3343: 16: shared
1: 16.. 31: 3328.. 3343: 16: 3344: last,shared,eof
/mnt/sde/snap/foobar: 2 extents found
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When deleting large files (which cross block group boundary) with
discard mount option, we find some btrfs_discard_extent() calls only
trimmed part of its space, not the whole range:
btrfs_discard_extent: type=0x1 start=19626196992 len=2144530432 trimmed=1073741824 ratio=50%
type: bbio->map_type, in above case, it's SINGLE DATA.
start: Logical address of this trim
len: Logical length of this trim
trimmed: Physically trimmed bytes
ratio: trimmed / len
Thus leaving some unused space not discarded.
[CAUSE]
When discard mount option is specified, after a transaction is fully
committed (super block written to disk), we begin to cleanup pinned
extents in the following call chain:
btrfs_commit_transaction()
|- btrfs_finish_extent_commit()
|- find_first_extent_bit(unpin, 0, &start, &end, EXTENT_DIRTY);
|- btrfs_discard_extent()
However, pinned extents are recorded in an extent_io_tree, which can
merge adjacent extent states.
When a large file gets deleted and it has adjacent file extents across
block group boundary, we will get a large merged range like this:
|<--- BG1 --->|<--- BG2 --->|
|//////|<-- Range to discard --->|/////|
To discard that range, we have the following calls:
btrfs_discard_extent()
|- btrfs_map_block()
| Returned bbio will end at BG1's end. As btrfs_map_block()
| never returns result across block group boundary.
|- btrfs_issuse_discard()
Issue discard for each stripe.
So we will only discard the range in BG1, not the remaining part in BG2.
Furthermore, this bug is not that reliably observed, for above case, if
there is no other extent in BG2, BG2 will be empty and btrfs will trim
all space of BG2, covering up the bug.
[FIX]
- Allow __btrfs_map_block_for_discard() to modify @length parameter
btrfs_map_block() uses its @length paramter to notify the caller how
many bytes are mapped in current call.
With __btrfs_map_block_for_discard() also modifing the @length,
btrfs_discard_extent() now understands when to do extra trim.
- Call btrfs_map_block() in a loop until we hit the range end Since we
now know how many bytes are mapped each time, we can iterate through
each block group boundary and issue correct trim for each range.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The old code goes:
offset = logical - em->start;
length = min_t(u64, em->len - offset, length);
Where @length calculation is dependent on offset, it can take reader
several more seconds to find it's just the same code as:
offset = logical - em->start;
length = min_t(u64, em->start + em->len - logical, length);
Use above code to make the length calculate independent from other
variable, thus slightly increase the readability.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In check_extent_data_item(), we read file extent type without verifying
if the item size is valid.
Add such check to ensure the file extent type we read is correct.
The check is not as accurate as we need to cover both inline and regular
extents, so it only checks if the item size is larger or equal to inline
header.
So the existing size checks on inline/regular extents are still needed.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The "&fs_info->dev_replace.rwsem" and "&dev_replace->rwsem" refer to
the same lock but Smatch is not clever enough to figure that out so it
leads to static checker warnings. It's better to use it consistently
anyway.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The backup_root_index member stores the index at which the backup root
should be saved upon next transaction commit. However, there is a
small deviation from this behavior in the form of a check in
backup_super_roots which checks if current root generation equals to the
generation of the previous root. This can trigger in the following
scenario:
slot0: gen-2
slot1: gen-1
slot2: gen
slot3: unused
Now suppose slot3 (which is also the root specified in the super block)
is corrupted hence init_tree_roots chooses to use the backup root at
slot2, meaning read_backup_root will read slot2 and assign the
superblock generation to gen-1. Despite this backup_root_index will
point at slot3 because its init happens in init_backup_root_slot, long
before any parsing of the backup roots occur. Then on next transaction
start, gen-1 will be incremented by 1 making the root's generation
equal gen. Subsequently, on transaction commit the following check
triggers:
if (btrfs_backup_tree_root_gen(root_backup) ==
btrfs_header_generation(info->tree_root->node))
This causes the 'next_backup', which is the index at which the backup is
going to be written to, to set to last_backup, which will be slot2.
All of this is a very confusing way of expressing the following
invariant:
Always write a backup root at the index following the last used backup
root.
This commit streamlines this logic by setting backup_root_index to the
next index after the one used for mount.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The old name name was an awful misnomer because it didn't really find
the oldest super backup per-se but rather its slot. For example if we
have:
slot0: gen - 2
slot1: gen - 1
slot2: gen
slot3: empty
init_backup_root_slot will return slot3 and not slot0.
The new name is more appropriate since the function doesn't care whether
there is a valid backup in the returned slot or not.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function has been superseded by previous commits and is no longer
used so just remove it.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since the filesystem is not well formed and no trees are loaded it's
pointless holding the objectid_mutex. Just remove its usage.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The code responsible for reading and initializing tree roots is
scattered in open_ctree among 2 labels, emulating a loop. This is rather
confusing to reason about. Instead, factor the code to a new function,
init_tree_roots which implements the same logical flow.
There are a couple of notable differences, namely:
* Instead of using next_backup_root it's using the newly introduced
read_backup_root.
* If read_backup_root returns an error init_tree_roots propagates the
error and there is no special handling of that case e.g. the code jumps
straight to 'fail_tree_roots' label. The old code, however, was
(erroneously) jumping to 'fail_block_groups' label if next_backup_root
did fail, this was unnecessary since the tree roots init logic doesn't
modify the state of block groups.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function will replace next_root_backup with a much saner/cleaner
interface.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's no longer needed following cleanups around find_newest_backup_root
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Backup roots are always written in a circular manner. By definition we
can only ever have 1 backup root whose generation equals to that of the
superblock. Hence, the 'if' in the for loop will trigger at most once.
This is sufficient to return the newest backup root.
Furthermore the newest_gen parameter is always set to the generation of
the superblock. This value can be obtained from the fs_info.
This patch removes the unnecessary code dealing with the wraparound
case and makes 'newest_gen' a local variable.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The inode delalloc mutex was added a long time ago by commit f248679e86
("Btrfs: add a delalloc mutex to inodes for delalloc reservations"), and
the reason for its introduction is not very clear from the change log. It
claims it solves bogus warnings from lockdep, however it lacks an example
report/warning from lockdep, or any explanation.
Since we have enough concurrentcy protection from the locks of the space
info and block reserve objects, and such lockdep warnings don't seem to
exist anymore (at least on a 5.3 kernel I couldn't get them with fstests,
ltp, fs_mark, etc), remove it, simplifying things a bit and decreasing
the size of the btrfs_inode structure. With some quick fio tests doing
direct IO and mmap writes I couldn't observe any significant performance
increase either (direct IO writes that don't increase the file's size
don't hold the inode's lock for their entire duration and mmap writes
don't hold the inode's lock at all), which are the only type of writes
that could see any performance gain due to less serialization.
Review feedback from Josef:
The problem was taking the i_mutex in mmap, which is how I was
protecting delalloc reservations originally. The delalloc mutex didn't
come with all of the other dependencies. That's what the lockdep
messages were about, removing the lock isn't going to make them appear
again.
We _had_ to lock around this because we used to do tricks to keep from
over-reserving, and if we didn't serialize delalloc reservations we'd
end up with ugly accounting problems when we tried to clean things up.
However with my recentish changes this isn't the case anymore. Every
operation is responsible for reserving its space, and then adding it to
the inode. Then cleaning up is straightforward and can't be mucked up
by other users. So we no longer need the delalloc mutex to safe us from
ourselves.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It is not used anymore since commit 957780eb27 ("Btrfs: introduce
ticketed enospc infrastructure"), so just remove it.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_statfs() we cache fs_info::space_info in a local variable only
to use it once in a list_for_each_rcu() statement.
Not only is the local variable unnecessary it even makes the code harder
to follow as it's not clear which list it is iterating.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The on-disk format of block group item makes use of the key that stores
the offset and length. This is further used in the code, although this
makes thing harder to understand. The key is also packed so the
offset/length is not properly aligned as u64.
Add start (key.objectid) and length (key.offset) members to block group
and remove the embedded key. When the item is searched or written, a
local variable for key is used.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Accessors defined by BTRFS_SETGET_FUNCS take a raw extent buffer and
manipulate the items there, there's no special prefix required. The
block group accessors had _disk_ because previously the names were
occupied by the on-stack accessors. As this has been addressed in the
previous patch, we can now unify the naming.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
All accessors defined by BTRFS_SETGET_STACK_FUNCS contain _stack_ in the
name, the block group ones were not following that scheme, so let's
switch them.
Signed-off-by: David Sterba <dsterba@suse.com>
The members ::used and ::flags are now in the block group cache
structure, the last one is chunk_objectid, but that's set to a fixed
value and otherwise unused. The item is constructed from a local
variable before write, so we can remove the embedded one from block
group.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The flags are read from the item that's embedded to block group struct,
but the item will be removed. Use the ::flags after read and before
write.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For unknown reasons, the member 'used' in the block group struct is
stored in the b-tree item and accessed everywhere using the special
accessor helper. Let's unify it and make it a regular member and only
update the item before writing it to the tree.
The item is still being used for flags and chunk_objectid, there's some
duplication until the item is removed in following patches.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The last user of btrfs_bio::flags was removed in commit 326e1dbb57
("block: remove management of bi_remaining when restoring original
bi_end_io"), remove it.
(Tagged for stable as the structure is heavily used and space savings
are desirable.)
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently all the checksum algorithms generate a fixed size digest size
and we use it. The on-disk format can hold up to BTRFS_CSUM_SIZE bytes
and BLAKE2b produces digest of 512 bits by default. We can't do that and
will use the blake2b-256, this needs to be passed to the crypto API.
Separate that from the base algorithm name and add a member to request
specific driver, in this case with the digest size.
The only place that uses the driver name is the crypto API setup.
Signed-off-by: David Sterba <dsterba@suse.com>
Show the used driver for the checksum algorithm for the filesystem in
sysfs file /sys/fs/btrfs/UUID/features/checksum, eg.
crc32c (crc32c-generic)
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Export supported checksum algorithms via sysfs in the list of static
features:
/sys/fs/btrfs/features/supported_checksums
Space spearated list of checksum algorithm names.
Co-developed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Add sha256 to the list of possible checksumming algorithms used by BTRFS.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add xxhash64 to the list of possible checksumming algorithms used by
BTRFS.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Redefine XFS_IS_CORRUPT so that it reports corruptions only via
xfs_corruption_report. Since these are on-disk contents (and not checks
of internal state), we don't ever want to panic the kernel. This also
amends the corruption report to recommend unmounting and running
xfs_repair.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
We can remove it now, without needing to rework the KM_ flags.
Use kmem_cache_free() directly.
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Use kmem_cache_destroy directly
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Remove kmem_zone_init() and kmem_zone_init_flags() together with their
specific KM_* to SLAB_* flag wrappers.
Use kmem_cache_create() directly.
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In affs_remount if data is provided it is duplicated into new_opts. The
allocated memory for new_opts is only released if parse_options fails.
There's a bit of history behind new_options, originally there was
save/replace options on the VFS layer so the 'data' passed must not
change (thus strdup), this got cleaned up in later patches. But not
completely.
There's no reason to do the strdup in cases where the filesystem does
not need to reuse the 'data' again, because strsep would modify it
directly.
Fixes: c8f33d0bec ("affs: kstrdup() memory handling")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
At a slight footprint cost (24 vs 32 bytes), mutexes are more optimal
than semaphores; it's also a nicer interface for mutual exclusion,
which is why they are encouraged over binary semaphores, when possible.
For both i_link_lock and i_ext_lock (and hence i_hash_lock which I
annotated for the hash lock mapping hackery for lockdep), their semantics
imply traditional lock ownership; that is, the lock owner is the same for
both lock/unlock operations and does not run in irq context. Therefore
it is safe to convert.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
To remove use of extent_map::bdev we need to find a replacement, and the
latest_bdev is the only one we can use here, because inode::i_bdev and
superblock::s_bdev are NULL.
The DIO code uses bdev in two places:
* to read blocksize to perform alignment checks in
do_blockdev_direct_IO, but we do them in btrfs code before any call to
DIO
* in the following call chain:
do_direct_IO
get_more_blocks
sdio->get_block() <-- this is btrfs_get_blocks_direct
subsequently the map_bh->b_dev member is used in clean_bdev_aliases
and dio_new_bio to set the bio's bdev to that of the buffer_head.
However, because we have provided a submit function dio_bio_submit
calls our submission function and ignores the bdev.
So it's safe to pass any valid bdev that's used within the filesystem.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is a preparatory patch for removing extent_map::bdev. There's some
history behind the code so this is only precaution to catch if things
break before the actual removal happens.
Logically, comparing a raw low-level block device (bdev) does not make
sense for extent maps (high-level objects). This had no effect in
practice but was quite confusing in the code. The lookup_map is set iff
EXTENT_FLAG_FS_MAPPING is set.
The two pointers were stored in the same bytes and used potentially in
two meanings. Now they're split, so the asserts are in place to check
that the condition will not change.
The lookup map pointer misused bdev, this has been changed in commit
95617d6932 ("btrfs: cleanup, stop casting for extent_map->lookup
everywhere") to the explicit type. But the semantics hasn't changed and
bdev was not actually used to decide if maps are mergeable.
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of checking if we've read a BTRFS_CHUNK_ITEM_KEY from disk and
then process it we could just bail out early if the read disk key wasn't
a BTRFS_CHUNK_ITEM_KEY.
This removes a level of indentation and makes the code nicer to read.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_may_alloc_data_chunk() we're checking if the chunk type is of
type BTRFS_BLOCK_GROUP_DATA and if it is we process it.
Instead of checking if the chunk type is a BTRFS_BLOCK_GROUP_DATA chunk
we can negate the check and bail out early if it isn't.
This makes the code a bit more readable.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In lock_stripe_add() we're caching the bucket for the stripe hash table
just for a single call to dereference the stripe hash.
If we just directly call rbio_bucket() we can safe the pointless local
variable.
Also move the dereferencing of the stripe hash outside of the variable
declaration block to not break over the 80 characters limit.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In lock_stripe_add() we're traversing the stripe hash list and check if
the current list element's raid_map equals is equal to the raid bio's
raid_map. If both are equal we continue processing.
If we'd check for inequality instead of equality we can reduce one level
of indentation.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of using an input pointer parameter as the return value and have
an int as the return type of find_desired_extent, rework the function to
directly return the found offset. Doing that the 'ret' variable in
btrfs_llseek_file can be removed. Additional (subjective) benefit is
that btrfs' llseek function now resemebles those of the other major
filesystems.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Handle SEEK_END/SEEK_CUR in a single 'default' case by directly
returning from generic_file_llseek. This makes the 'out' label
redundant. Finally return directly the vale from vfs_setpos. No
semantic changes.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Modifying the file position is done on a per-file basis. This renders
holding the inode lock for writing useless and makes the performance of
concurrent llseek's abysmal.
Fix this by holding the inode for read. This provides protection against
concurrent truncates and find_desired_extent already includes proper
extent locking for the range which ensures proper locking against
concurrent writes. SEEK_CUR and SEEK_END can be done lockessly.
The former is synchronized by file::f_lock spinlock. SEEK_END is not
synchronized but atomic, but that's OK since there is not guarantee that
SEEK_END will always be at the end of the file in the face of tail
modifications.
This change brings ~82% performance improvement when doing a lot of
parallel fseeks. The workload essentially does:
for (d=0; d<num_seek_read; d++)
{
/* offset %= 16777216; */
fseek (f, 256 * d % 16777216, SEEK_SET);
fread (buffer, 64, 1, f);
}
Without patch:
num workprocesses = 16
num fseek/fread = 8000000
step = 256
fork 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
real 0m41.412s
user 0m28.777s
sys 2m16.510s
With patch:
num workprocesses = 16
num fseek/fread = 8000000
step = 256
fork 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
real 0m11.479s
user 0m27.629s
sys 0m21.040s
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can infer the ops from the type that is now passed to all functions
that would need it, this makes workspace_manager::ops redundant and can
be removed.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Replace indirect calls to free_workspace by switch and calls to the
specific callbacks. This is mainly to get rid of the indirection due to
spectre vulnerability mitigations.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can infer the workspace_manager from type and the type will be used
in the following patch to call a common helper for free_workspace.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Replace indirect calls to alloc_workspace by switch and calls to the
specific callbacks. This is mainly to get rid of the indirection due to
spectre vulnerability mitigations.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We can infer the workspace_manager from type and the type will be used
in the following patch to call a common helper for alloc_workspace.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Similar to get_workspace, majority of the callbacks is trivial, we don't
gain anything by the indirection, so replace them by a switch function.
Trivial callback implementations use the helper.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Majority of the callbacks is trivial, we don't gain anything by the
indirection, so replace them by a switch function.
ZLIB needs to adjust level in the callback and ZSTD workspace management
is complex, the rest is call to the helper.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The indirect calls will be replaced by a switch in compression.c.
(Switch is faster than indirect calls with when Spectre mitigations are
enabled).
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Replace loop calling to all algos with a list of direct calls to the
cleanup manager callback. When that becomes trivial it is replaced by
direct call to the helper.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With the access to the workspace structures, we can look it up together
with the compression ops inside the workspace manager cleanup helper.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Replace loop calling to all algos with a list of direct calls to the
init manager callback. When that becomes trivial it is replaced by
direct call to the helper.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
With the access to the workspace structures, we can look it up together
with the compression ops inside the workspace manager init helper.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's a lot of indirection when the generic code calls into
algo-specific callbacks to reach the private workspace manager structure
and back to the generic code.
To simplify that, export the workspace manager for heuristic, LZO and
ZLIB, while ZSTD is going to use it's own manager.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The indirect calls bring some overhead due to spectre vulnerability
mitigations. The number of cases is small and below the threshold
(10-20) where indirect call would be better.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Export compress_pages, decompress_bio and decompress callbacks for all
compression algos. The indirect calls will be replaced by a switch.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When free'ing extents in a block group we check to see if the block
group is not cached, and then cache it if we need to. However we'll
just carry on as long as we're loading the cache. This is problematic
because we are dirtying the block group here. If we are fast enough we
could do a transaction commit and clear the free space cache while we're
still loading the space cache in another thread. This truncates the
free space inode, which will keep it from loading the space cache.
Fix this by using the btrfs_block_group_cache_done helper so that we try
to load the space cache unconditionally here, which will result in the
caller waiting for the fast caching to complete and keep us from
truncating the free space inode.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While testing 5.2 we ran into the following panic
[52238.017028] BUG: kernel NULL pointer dereference, address: 0000000000000001
[52238.105608] RIP: 0010:drop_buffers+0x3d/0x150
[52238.304051] Call Trace:
[52238.308958] try_to_free_buffers+0x15b/0x1b0
[52238.317503] shrink_page_list+0x1164/0x1780
[52238.325877] shrink_inactive_list+0x18f/0x3b0
[52238.334596] shrink_node_memcg+0x23e/0x7d0
[52238.342790] ? do_shrink_slab+0x4f/0x290
[52238.350648] shrink_node+0xce/0x4a0
[52238.357628] balance_pgdat+0x2c7/0x510
[52238.365135] kswapd+0x216/0x3e0
[52238.371425] ? wait_woken+0x80/0x80
[52238.378412] ? balance_pgdat+0x510/0x510
[52238.386265] kthread+0x111/0x130
[52238.392727] ? kthread_create_on_node+0x60/0x60
[52238.401782] ret_from_fork+0x1f/0x30
The page we were trying to drop had a page->private, but had no
page->mapping and so called drop_buffers, assuming that we had a
buffer_head on the page, and then panic'ed trying to deref 1, which is
our page->private for data pages.
This is happening because we're truncating the free space cache while
we're trying to load the free space cache. This isn't supposed to
happen, and I'll fix that in a followup patch. However we still
shouldn't allow those sort of mistakes to result in messing with pages
that do not belong to us. So add the page->mapping check to verify that
we still own this page after dropping and re-acquiring the page lock.
This page being unlocked as:
btrfs_readpage
extent_read_full_page
__extent_read_full_page
__do_readpage
if (!nr)
unlock_page <-- nr can be 0 only if submit_extent_page
returns an error
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ add callchain ]
Signed-off-by: David Sterba <dsterba@suse.com>
In the fixup worker, if we fail to mark the range as delalloc in the io
tree, we must release the previously reserved metadata, as well as update
the outstanding extents counter for the inode, otherwise we leak metadata
space.
In pratice we can't return an error from btrfs_set_extent_delalloc(),
which is just a wrapper around __set_extent_bit(), as for most errors
__set_extent_bit() does a BUG_ON() (or panics which hits a BUG_ON() as
well) and returning an -EEXIST error doesn't happen in this case since
the exclusive bits parameter always has a value of 0 through this code
path. Nevertheless, just fix the error handling in the fixup worker,
in case one day __set_extent_bit() can return an error to this code
path.
Fixes: f3038ee3a3 ("btrfs: Handle btrfs_set_extent_delalloc failure in fixup worker")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When doing a buffered write it's possible to leave the subv_writers
counter of the root, used for synchronization between buffered nocow
writers and snapshotting. This happens in an exceptional case like the
following:
1) We fail to allocate data space for the write, since there's not
enough available data space nor enough unallocated space for allocating
a new data block group;
2) Because of that failure, we try to go to NOCOW mode, which succeeds
and therefore we set the local variable 'only_release_metadata' to true
and set the root's sub_writers counter to 1 through the call to
btrfs_start_write_no_snapshotting() made by check_can_nocow();
3) The call to btrfs_copy_from_user() returns zero, which is very unlikely
to happen but not impossible;
4) No pages are copied because btrfs_copy_from_user() returned zero;
5) We call btrfs_end_write_no_snapshotting() which decrements the root's
subv_writers counter to 0;
6) We don't set 'only_release_metadata' back to 'false' because we do
it only if 'copied', the value returned by btrfs_copy_from_user(), is
greater than zero;
7) On the next iteration of the while loop, which processes the same
page range, we are now able to allocate data space for the write (we
got enough data space released in the meanwhile);
8) After this if we fail at btrfs_delalloc_reserve_metadata(), because
now there isn't enough free metadata space, or in some other place
further below (prepare_pages(), lock_and_cleanup_extent_if_need(),
btrfs_dirty_pages()), we break out of the while loop with
'only_release_metadata' having a value of 'true';
9) Because 'only_release_metadata' is 'true' we end up decrementing the
root's subv_writers counter to -1 (through a call to
btrfs_end_write_no_snapshotting()), and we also end up not releasing the
data space previously reserved through btrfs_check_data_free_space().
As a consequence the mechanism for synchronizing NOCOW buffered writes
with snapshotting gets broken.
Fix this by always setting 'only_release_metadata' to false at the start
of each iteration.
Fixes: 8257b2dc3c ("Btrfs: introduce btrfs_{start, end}_nocow_write() for each subvolume")
Fixes: 7ee9e4405f ("Btrfs: check if we can nocow if we don't have data space")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Some functions are doing some unnecessary indirection to reach the
btrfs_fs_info struct. Change these functions to receive a btrfs_fs_info
struct instead of a *file.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We don't need int argument bool shall do in free_root_pointers(). And
rename the argument as it confused two people.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The compression type upper limit constant is the same as the last value
and this is confusing. In order to keep coding style consistent, use
BTRFS_NR_COMPRESS_TYPES as the total number that follows the idom of
'NR' being one more than the last value.
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use enum to replace macro definitions of extent types.
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
DEFINE_HASHTABLE itself has already included initialization code,
we don't have to call hash_init() again, so remove it.
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This function is used only during the final phase of freespace cache
writeout. This is necessary since using the plain btrfs_join_transaction
api is deadlock prone. The deadlock looks like:
T1:
btrfs_commit_transaction
commit_cowonly_roots
btrfs_write_dirty_block_groups
btrfs_wait_cache_io
__btrfs_wait_cache_io
btrfs_wait_ordered_range <-- Triggers ordered IO for freespace
inode and blocks transaction commit
until freespace cache writeout
T2: <-- after T1 has triggered the writeout
finish_ordered_fn
btrfs_finish_ordered_io
btrfs_join_transaction <--- this would block waiting for current
transaction to commit, but since trans
commit is waiting for this writeout to
finish
The special purpose functions prevents it by simply skipping the "wait
for writeout" since it's guaranteed the transaction won't proceed until
we are done.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Using an ASSERT in btrfs_pin_extent allows to more stringently observe
whether the function is called under a transaction or not.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The helper is trivial and we can understand what the atomic_inc on
something named refs does.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During a cyclic writeback, extent_write_cache_pages() uses done_index
to update the writeback_index after the current run is over. However,
instead of current index + 1, it gets to to the current index itself.
Unfortunately, this, combined with returning on EOF instead of looping
back, can lead to the following pathlogical behavior.
1. There is a single file which has accumulated enough dirty pages to
trigger balance_dirty_pages() and the writer appending to the file
with a series of short writes.
2. balance_dirty_pages kicks in, wakes up background writeback and sleeps.
3. Writeback kicks in and the cursor is on the last page of the dirty
file. Writeback is started or skipped if already in progress. As
it's EOF, extent_write_cache_pages() returns and the cursor is set
to done_index which is pointing to the last page.
4. Writeback is done. Nothing happens till balance_dirty_pages
finishes, at which point we go back to #1.
This can almost completely stall out writing back of the file and keep
the system over dirty threshold for a long time which can mess up the
whole system. We encountered this issue in production with a package
handling application which can reliably reproduce the issue when
running under tight memory limits.
Reading the comment in the error handling section, this seems to be to
avoid accidentally skipping a page in case the write attempt on the
page doesn't succeed. However, this concern seems bogus.
On each page, the code either:
* Skips and moves onto the next page.
* Fails issue and sets done_index to index + 1.
* Successfully issues and continue to the next page if budget allows
and not EOF.
IOW, as long as it's not EOF and there's budget, the code never
retries writing back the same page. Only when a page happens to be
the last page of a particular run, we end up retrying the page, which
can't possibly guarantee anything data integrity related. Besides,
cyclic writes are only used for non-syncing writebacks meaning that
there's no data integrity implication to begin with.
Fix it by always setting done_index past the current page being
processed.
Note that this problem exists in other writepages too.
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 4617ea3a52 (" Btrfs: fix necessary chunk tree space calculation
when allocating a chunk") removed the is_allocation argument from
check_system_chunk, since the formula for reserving the necessary space
for allocation or removing a chunk would be the same.
So, rework the comment by removing the mention of is_allocation
argument.
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Unlike read time tree checker errors, write time error can't be
inspected by "btrfs inspect dump-tree", so we need extra information to
determine what's going wrong.
The patch will add the following output for write time tree checker
error:
- The content of the offending tree block
To help determining if it's a false alert.
- Kernel WARN_ON() for debug build
This is helpful for us to detect unexpected write time tree checker
error, especially fstests could catch the dmesg.
Since the WARN_ON() is only triggered for write time tree checker,
test cases utilizing dm-error won't trigger this WARN_ON(), thus no
extra noise.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Refactor the check for prev_key->objectid of the following key types
into one function, check_prev_ino():
- EXTENT_DATA
- INODE_REF
- DIR_INDEX
- DIR_ITEM
- XATTR_ITEM
Also add the check of prev_key for INODE_REF.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
extent_write_locked_range() is used when we're falling back to buffered
IO from inside of compression. It allocates its own wbc and should
associate it with the inode's i_wb to make sure the IO goes down from
the correct cgroup.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Async CRCs and compression submit IO through helper threads, which means
they have IO priority inversions when cgroup IO controllers are in use.
This flags all of the writes submitted by btrfs helper threads as
REQ_CGROUP_PUNT. submit_bio() will punt these to dedicated per-blkcg
work items to avoid the priority inversion.
For the compression code, we take a reference on the wbc's blkg css and
pass it down to the async workers.
For the async CRCs, the bio already has the correct css, we just need to
tell the block layer to use REQ_CGROUP_PUNT.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Chris Mason <clm@fb.com>
Modified-and-reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David Sterba <dsterba@suse.com>
The btrfs writepages function collects a large range of pages flagged
for delayed allocation, and then sends them down through the COW code
for processing. When compression is on, we allocate one async_chunk
structure for every 512K, and then run those pages through the
compression code for IO submission.
writepages starts all of this off with a single page, locked by the
original call to extent_write_cache_pages(), and it's important to keep
track of this page because it has already been through
clear_page_dirty_for_io().
The btrfs async_chunk struct has a pointer to the locked_page, and when
we're redirtying the page because compression had to fallback to
uncompressed IO, we use page->index to decide if a given async_chunk
struct really owns that page.
But, this is racey. If a given delalloc range is broken up into two
async_chunks (chunkA and chunkB), we can end up with something like
this:
compress_file_range(chunkA)
submit_compress_extents(chunkA)
submit compressed bios(chunkA)
put_page(locked_page)
compress_file_range(chunkB)
...
Or:
async_cow_submit
submit_compressed_extents <--- falls back to buffered writeout
cow_file_range
extent_clear_unlock_delalloc
__process_pages_contig
put_page(locked_pages)
async_cow_submit
The end result is that chunkA is completed and cleaned up before chunkB
even starts processing. This means we can free locked_page() and reuse
it elsewhere. If we get really lucky, it'll have the same page->index
in its new home as it did before.
While we're processing chunkB, we might decide we need to fall back to
uncompressed IO, and so compress_file_range() will call
__set_page_dirty_nobufers() on chunkB->locked_page.
Without cgroups in use, this creates as a phantom dirty page, which
isn't great but isn't the end of the world. What can happen, it can go
through the fixup worker and the whole COW machinery again:
in submit_compressed_extents():
while (async extents) {
...
cow_file_range
if (!page_started ...)
extent_write_locked_range
else if (...)
unlock_page
continue;
This hasn't been observed in practice but is still possible.
With cgroups in use, we might crash in the accounting code because
page->mapping->i_wb isn't set.
BUG: unable to handle kernel NULL pointer dereference at 00000000000000d0
IP: percpu_counter_add_batch+0x11/0x70
PGD 66534e067 P4D 66534e067 PUD 66534f067 PMD 0
Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
CPU: 16 PID: 2172 Comm: rm Not tainted
RIP: 0010:percpu_counter_add_batch+0x11/0x70
RSP: 0018:ffffc9000a97bbe0 EFLAGS: 00010286
RAX: 0000000000000005 RBX: 0000000000000090 RCX: 0000000000026115
RDX: 0000000000000030 RSI: ffffffffffffffff RDI: 0000000000000090
RBP: 0000000000000000 R08: fffffffffffffff5 R09: 0000000000000000
R10: 00000000000260c0 R11: ffff881037fc26c0 R12: ffffffffffffffff
R13: ffff880fe4111548 R14: ffffc9000a97bc90 R15: 0000000000000001
FS: 00007f5503ced480(0000) GS:ffff880ff7200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000d0 CR3: 00000001e0459005 CR4: 0000000000360ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
account_page_cleaned+0x15b/0x1f0
__cancel_dirty_page+0x146/0x200
truncate_cleanup_page+0x92/0xb0
truncate_inode_pages_range+0x202/0x7d0
btrfs_evict_inode+0x92/0x5a0
evict+0xc1/0x190
do_unlinkat+0x176/0x280
do_syscall_64+0x63/0x1a0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
The fix here is to make asyc_chunk->locked_page NULL everywhere but the
one async_chunk struct that's allowed to do things to the locked page.
Link: https://lore.kernel.org/linux-btrfs/c2419d01-5c84-3fb4-189e-4db519d08796@suse.com/
Fixes: 771ed689d2 ("Btrfs: Optimize compressed writeback and reads")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Chris Mason <clm@fb.com>
[ update changelog from mail thread discussion ]
Signed-off-by: David Sterba <dsterba@suse.com>
Now that we're not using btrfs_schedule_bio() anymore, delete all the
code that supported it.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_schedule_bio() hands IO off to a helper thread to do the actual
submit_bio() call. This has been used to make sure async crc and
compression helpers don't get stuck on IO submission. To maintain good
performance, over time the IO submission threads duplicated some IO
scheduler characteristics such as high and low priority IOs and they
also made some ugly assumptions about request allocation batch sizes.
All of this cost at least one extra context switch during IO submission,
and doesn't fit well with the modern blkmq IO stack. So, this commit stops
using btrfs_schedule_bio(). We may need to adjust the number of async
helper threads for crcs and compression, but long term it's a better
path.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The attribute is more relaxed than const and the functions could
dereference pointers, as long as the observable state is not changed. We
do have such functions, based on -Wsuggest-attribute=pure .
The visible effects of this patch are negligible, there are differences
in the assembly but hard to summarize.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For some reason the attribute is called __attribute_const__ and not
__const, marks functions that have no observable effects on program
state, IOW not reading pointers, just the arguments and calculating a
value. Allows the compiler to do some optimizations, based on
-Wsuggest-attribute=const . The effects are rather small, though, about
60 bytes decrese of btrfs.ko.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The attribute can mark functions supposed to be called rarely if at all
and the text can be moved to sections far from the other code. The
attribute has been added to several functions already, this patch is
based on hints given by gcc -Wsuggest-attribute=cold.
The net effect of this patch is decrease of btrfs.ko by 1000-1300,
depending on the config options.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The parameter is now always set to NULL and could be dropped. The last
user was get_default_root but that got reworked in 05dbe6837b ("Btrfs:
unify subvol= and subvolid= mounting") and the parameter became unused.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We hit the following warning while running down a different problem
[ 6197.175850] ------------[ cut here ]------------
[ 6197.185082] refcount_t: underflow; use-after-free.
[ 6197.194704] WARNING: CPU: 47 PID: 966 at lib/refcount.c:190 refcount_sub_and_test_checked+0x53/0x60
[ 6197.521792] Call Trace:
[ 6197.526687] __btrfs_release_delayed_node+0x76/0x1c0
[ 6197.536615] btrfs_kill_all_delayed_nodes+0xec/0x130
[ 6197.546532] ? __btrfs_btree_balance_dirty+0x60/0x60
[ 6197.556482] btrfs_clean_one_deleted_snapshot+0x71/0xd0
[ 6197.566910] cleaner_kthread+0xfa/0x120
[ 6197.574573] kthread+0x111/0x130
[ 6197.581022] ? kthread_create_on_node+0x60/0x60
[ 6197.590086] ret_from_fork+0x1f/0x30
[ 6197.597228] ---[ end trace 424bb7ae00509f56 ]---
This is because the free side drops the ref without the lock, and then
takes the lock if our refcount is 0. So you can have nodes on the tree
that have a refcount of 0. Fix this by zero'ing out that element in our
temporary array so we don't try to kill it again.
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
Its very helpful if we had logged the device scanner process name to
debug the race condition between the systemd-udevd scan and the user
initiated device forget command.
This patch adds process name and pid to the scan message.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add pid to the message ]
Signed-off-by: David Sterba <dsterba@suse.com>
That function adds unnecessary indirection between backref_in_log and
the caller. Furthermore it also "downgrades" backref_in_log's return
value to a boolean, when in fact it could very well be an error.
Rectify the situation by simply opencoding name_in_log_ref in
replay_one_name and properly handling possible return codes from
backref_in_log.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
This function can return a negative error value if btrfs_search_slot
errors for whatever reason or if btrfs_alloc_path runs out of memory.
This is currently problemattic because backref_in_log is treated by its
callers as if it returns boolean.
Fix this by adding proper error handling in callers. That also enables
the function to return the direct error code from btrfs_search_slot.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Direct replacement, though note that the inside of the loop in
btrfs_find_name_in_backref is organized in a slightly different way but
is equvalent.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
The state was introduced in commit 4a9d8bdee3 ("Btrfs: make the state
of the transaction more readable"), then in commit 302167c50b
("btrfs: don't end the transaction for delayed refs in throttle") the
state is completely removed.
So we can just clean up the state since it's only compared but never
set.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add an overview of the basic btrfs transaction transitions, including
the following states:
- No transaction states
- Transaction N [[TRANS_STATE_RUNNING]]
- Transaction N [[TRANS_STATE_COMMIT_START]]
- Transaction N [[TRANS_STATE_COMMIT_DOING]]
- Transaction N [[TRANS_STATE_UNBLOCKED]]
- Transaction N [[TRANS_STATE_COMPLETED]]
For each state, the comment will include:
- Basic explaination about current state
- How to go next stage
- What will happen if we call various start_transaction() functions
- Relationship to transaction N+1
This doesn't provide tech details, but serves as a cheat sheet for
reader to get into the code a little easier.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Replace is_power_of_2 with the helper that is self-documenting and
remove the open coded call in alloc_profile_is_valid.
Signed-off-by: David Sterba <dsterba@suse.com>
As is_power_of_two takes unsigned long, it's not safe on 32bit
architectures, but we could pass any u64 value in seveal places. Add a
separate helper and also an alias that better expresses the purpose for
which the helper is used.
Signed-off-by: David Sterba <dsterba@suse.com>
When balance reduces the number of copies of metadata, it reduces the
redundancy, use the term redundancy instead of integrity.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function belongs to the family of locking functions, so move it
there. The 'noinline' keyword is dropped as it's now an exported
function that does not need it.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function belongs to the family of locking functions, so move it
there. The 'noinline' keyword is dropped as it's now an exported
function that does not need it.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function btrfs_assert_tree_locked is used outside of the locking
code so it is exported, however we can make it static inine as it's
fairly trivial.
This is the only locking assertion used in release builds, inlining
improves the text size by 174 bytes and reduces stack consumption in the
callers.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
I've noticed that none of the btrfs_assert_*lock* debugging helpers is
inlined, despite they're short and mostly a value update. Making them
inline shaves 67 from the text size, reduces stack consumption and
perhaps also slightly improves the performance due to avoiding
unnecessary calls.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit ac0c7cf8be ("btrfs: fix crash when tracepoint arguments are
freed by wq callbacks") added a void pointer, wtag, which is passed into
trace_btrfs_all_work_done() instead of the freed work item. This is
silly for a few reasons:
1. The freed work item still has the same address.
2. work is still in scope after it's freed, so assigning wtag doesn't
stop anyone from using it.
3. The tracepoint has always taken a void * argument, so assigning wtag
doesn't actually make things any more type-safe. (Note that the
original bug in commit bc074524e1 ("btrfs: prefix fsid to all trace
events") was that the void * was implicitly casted when it was passed
to btrfs_work_owner() in the trace point itself).
Instead, let's add some clearer warnings as comments.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 9e0af23764 ("Btrfs: fix task hang under heavy compressed
write") worked around the issue that a recycled work item could get a
false dependency on the original work item due to how the workqueue code
guarantees non-reentrancy. It did so by giving different work functions
to different types of work.
However, the fixes in the previous few patches are more complete, as
they prevent a work item from being recycled at all (except for a tiny
window that the kernel workqueue code handles for us). This obsoletes
the previous fix, so we don't need the unique helpers for correctness.
The only other reason to keep them would be so they show up in stack
traces, but they always seem to be optimized to a tail call, so they
don't show up anyways. So, let's just get rid of the extra indirection.
While we're here, rename normal_work_helper() to the more informative
btrfs_work_helper().
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, scrub_missing_raid56_worker() puts and potentially frees
sblock (which embeds the work item) and then submits a bio through
scrub_wr_submit(). This is another potential instance of the bug in
"btrfs: don't prematurely free work in run_ordered_work()". Fix it by
dropping the reference after we submit the bio.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, reada_start_machine_worker() frees the reada_machine_work and
then calls __reada_start_machine() to do readahead. This is another
potential instance of the bug in "btrfs: don't prematurely free work in
run_ordered_work()".
There _might_ already be a deadlock here: reada_start_machine_worker()
can depend on itself through stacked filesystems (__read_start_machine()
-> reada_start_machine_dev() -> reada_tree_block_flagged() ->
read_extent_buffer_pages() -> submit_one_bio() ->
btree_submit_bio_hook() -> btrfs_map_bio() -> submit_stripe_bio() ->
submit_bio() onto a loop device can trigger readahead on the lower
filesystem).
Either way, let's fix it by freeing the work at the end.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently, end_workqueue_fn() frees the end_io_wq entry (which embeds
the work item) and then calls bio_endio(). This is another potential
instance of the bug in "btrfs: don't prematurely free work in
run_ordered_work()".
In particular, the endio call may depend on other work items. For
example, btrfs_end_dio_bio() can call btrfs_subio_endio_read() ->
__btrfs_correct_data_nocsum() -> dio_read_error() ->
submit_dio_repair_bio(), which submits a bio that is also completed
through a end_workqueue_fn() work item. However,
__btrfs_correct_data_nocsum() waits for the newly submitted bio to
complete, thus it depends on another work item.
This example currently usually works because we use different workqueue
helper functions for BTRFS_WQ_ENDIO_DATA and BTRFS_WQ_ENDIO_DIO_REPAIR.
However, it may deadlock with stacked filesystems and is fragile
overall. The proper fix is to free the work item at the very end of the
work function, so let's do that.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We hit the following very strange deadlock on a system with Btrfs on a
loop device backed by another Btrfs filesystem:
1. The top (loop device) filesystem queues an async_cow work item from
cow_file_range_async(). We'll call this work X.
2. Worker thread A starts work X (normal_work_helper()).
3. Worker thread A executes the ordered work for the top filesystem
(run_ordered_work()).
4. Worker thread A finishes the ordered work for work X and frees X
(work->ordered_free()).
5. Worker thread A executes another ordered work and gets blocked on I/O
to the bottom filesystem (still in run_ordered_work()).
6. Meanwhile, the bottom filesystem allocates and queues an async_cow
work item which happens to be the recently-freed X.
7. The workqueue code sees that X is already being executed by worker
thread A, so it schedules X to be executed _after_ worker thread A
finishes (see the find_worker_executing_work() call in
process_one_work()).
Now, the top filesystem is waiting for I/O on the bottom filesystem, but
the bottom filesystem is waiting for the top filesystem to finish, so we
deadlock.
This happens because we are breaking the workqueue assumption that a
work item cannot be recycled while it still depends on other work. Fix
it by waiting to free the work item until we are done with all of the
related ordered work.
P.S.:
One might ask why the workqueue code doesn't try to detect a recycled
work item. It actually does try by checking whether the work item has
the same work function (find_worker_executing_work()), but in our case
the function is the same. This is the only key that the workqueue code
has available to compare, short of adding an additional, layer-violating
"custom key". Considering that we're the only ones that have ever hit
this, we should just play by the rules.
Unfortunately, we haven't been able to create a minimal reproducer other
than our full container setup using a compress-force=zstd filesystem on
top of another compress-force=zstd filesystem.
Suggested-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit fc97fab0ea ("btrfs: Replace fs_info->qgroup_rescan_worker
workqueue with btrfs_workqueue.") converted qgroup_rescan_work to be
initialized with btrfs_init_work(), but it left behind an unnecessary
memset(). Get rid of the memset().
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This needs to be cleaned up in the future, but for now it belongs to the
extent-io-tree stuff since it uses the internal tree search code.
Needed to export get_state_failrec and set_state_failrec as well since
we're not going to move the actual IO part of the failrec stuff out at
this point.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This utilizes internal stuff to the extent_io_tree, so we need to export
it before we move it.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
extent_io.c/h are huge, encompassing a bunch of different things. The
extent_io_tree code can live on its own, so separate this out.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We are moving extent_io_tree into it's on file, so separate out the
extent_state init stuff from extent_io_tree_init().
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We check both extent buffer and extent state leaks in the same function,
separate these two functions out so we can move them around.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The following comment shows up in btrfs_search_slot() with out much
sense:
/*
* setup the path here so we can release it under lock
* contention with the cow code
*/
if (cow) {
/* code touching path->lock[] is far away from here */
}
This comment hasn't been cleaned up after the relevant code has been
removed.
The original code is introduced in commit 65b51a009e
("btrfs_search_slot: reduce lock contention by cowing in two stages"):
+
+ /*
+ * setup the path here so we can release it under lock
+ * contention with the cow code
+ */
+ p->nodes[level] = b;
+ if (!p->skip_locking)
+ p->locks[level] = 1;
+
But in current code, we have different timing for modifying path lock,
so just remove the comment.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Similar to btrfs_search_slot() done in previous patch, make a shortcut
for the level 0 case and allow to reduce indentation for the remaining
case.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_search_slot(), we something like:
if (level != 0) {
/* Do search inside tree nodes*/
} else {
/* Do search inside tree leaves */
goto done;
}
This caused extra indent for tree node search code. Change it to
something like:
if (level == 0) {
/* Do search inside tree leaves */
goto done'
}
/* Do search inside tree nodes */
So we have more space to maneuver our code, this is especially useful as
the tree nodes search code is more complex than the leaves search code.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For INODE_REF we will check:
- Objectid (ino) against previous key
To detect missing INODE_ITEM.
- No overflow/padding in the data payload
Much like DIR_ITEM, but with less members to check.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For the following items, key->objectid is inode number:
- DIR_ITEM
- DIR_INDEX
- XATTR_ITEM
- EXTENT_DATA
- INODE_REF
So in the subvolume tree, such items must have its previous item share the
same objectid, e.g.:
(257 INODE_ITEM 0)
(257 DIR_INDEX xxx)
(257 DIR_ITEM xxx)
(258 INODE_ITEM 0)
(258 INODE_REF 0)
(258 XATTR_ITEM 0)
(258 EXTENT_DATA 0)
But if we have the following sequence, then there is definitely
something wrong, normally some INODE_ITEM is missing, like:
(257 INODE_ITEM 0)
(257 DIR_INDEX xxx)
(257 DIR_ITEM xxx)
(258 XATTR_ITEM 0) <<< objecitd suddenly changed to 258
(258 EXTENT_DATA 0)
So just by checking the previous key for above inode based key types, we
can detect a missing inode item.
For INODE_REF key type, the check will be added along with INODE_REF
checker.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's not used ouside of transaction.c
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A recent patch to btrfs showed that there was at least 1 case where a
nested transaction was committed. Nested transaction in this case means
a code which has a transaction handle calls some function which in turn
obtains a copy of the same transaction handle. In such cases the correct
thing to do is for the lower callee to call btrfs_end_transaction which
contains appropriate checks so as to not commit the transaction which
will result in stale trans handler for the caller.
To catch such cases add an assert in btrfs_commit_transaction ensuring
btrfs_trans_handle::use_count is always 1.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is similar to 942491c9e6 ("xfs: fix AIM7 regression"). Apparently
our current rwsem code doesn't like doing the trylock, then lock for
real scheme. This causes extra contention on the lock and can be
measured eg. by AIM7 benchmark. So change our read/write methods to
just do the trylock for the RWF_NOWAIT case.
Fixes: edf064e7c6 ("btrfs: nowait aio support")
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
One of the most frustrating messages our sustaining team sees is
the "Lock reclaim failed!" message. Add some observability in the
client's lock reclaim logic so we can capture better data the
first time a problem occurs.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Add a trace point in the main state manager loop to observe state
recovery operation. Help track down state recovery bugs.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Static analysis with Coverity detected a memory leak
Reported-by: Colin King <colin.king@canonical.com>
Fixes: ec4b092508 ("NFS: inter ssc open")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
This is triggering problems with static analysis with Coverity
Reported-by: Colin King <colin.king@netapp.com>
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Fix sparse warning:
fs/nfs/nfs42proc.c:527:5: warning:
symbol '_nfs42_proc_copy_notify' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Changing a sparse file could have an effect not only on the file size,
but also on the number of blocks used by the file in the underlying
filesystem. The server's cache_consistency_bitmap doesn't update the
SPACE_USED attribute, so let's switch to the nfs4_fattr_bitmap to catch
this update whenever we do an ALLOCATE or DEALLOCATE.
This patch fixes xfstests generic/568, which tests that fallocating an
unaligned range allocates all blocks touched by that range. Without this
patch, `stat` reports 0 bytes used immediately after the fallocate.
Adding a `sleep 5` to the test also catches the update, but it's better
to do so when we know something has changed.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
My understanding is that -EBUSY refers to the underlying device, and
that -ETXTBSY is used when attempting to access a file in use by the
kernel (like a swapfile). Changing this return code helps us pass
xfstests generic/569
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Remove NULL check before kfree, NULL check is taken care
on kfree.
Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The current_stateid is exported from nfs4state.c but not
declared in any of the headers. Add to nfs4_fs.h to
remove the following warning:
fs/nfs/nfs4state.c:80:20: warning: symbol 'current_stateid' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Running stress-test test_2 in mtd-utils on ubi device, sometimes we can
get following oops message:
BUG: unable to handle page fault for address: ffffffff00000140
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 280a067 P4D 280a067 PUD 0
Oops: 0000 [#1] SMP
CPU: 0 PID: 60 Comm: kworker/u16:1 Kdump: loaded Not tainted 5.2.0 #13
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0
-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
Workqueue: writeback wb_workfn (flush-ubifs_0_0)
RIP: 0010:rb_next_postorder+0x2e/0xb0
Code: 80 db 03 01 48 85 ff 0f 84 97 00 00 00 48 8b 17 48 83 05 bc 80 db
03 01 48 83 e2 fc 0f 84 82 00 00 00 48 83 05 b2 80 db 03 01 <48> 3b 7a
10 48 89 d0 74 02 f3 c3 48 8b 52 08 48 83 05 a3 80 db 03
RSP: 0018:ffffc90000887758 EFLAGS: 00010202
RAX: ffff888129ae4700 RBX: ffff888138b08400 RCX: 0000000080800001
RDX: ffffffff00000130 RSI: 0000000080800024 RDI: ffff888138b08400
RBP: ffff888138b08400 R08: ffffea0004a6b920 R09: 0000000000000000
R10: ffffc90000887740 R11: 0000000000000001 R12: ffff888128d48000
R13: 0000000000000800 R14: 000000000000011e R15: 00000000000007c8
FS: 0000000000000000(0000) GS:ffff88813ba00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffff00000140 CR3: 000000013789d000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
destroy_old_idx+0x5d/0xa0 [ubifs]
ubifs_tnc_start_commit+0x4fe/0x1380 [ubifs]
do_commit+0x3eb/0x830 [ubifs]
ubifs_run_commit+0xdc/0x1c0 [ubifs]
Above Oops are due to the slab-out-of-bounds happened in do-while of
function layout_in_gaps indirectly called by ubifs_tnc_start_commit. In
function layout_in_gaps, there is a do-while loop placing index nodes
into the gaps created by obsolete index nodes in non-empty index LEBs
until rest index nodes can totally be placed into pre-allocated empty
LEBs. @c->gap_lebs points to a memory area(integer array) which records
LEB numbers used by 'in-the-gaps' method. Whenever a fitable index LEB
is found, corresponding lnum will be incrementally written into the
memory area pointed by @c->gap_lebs. The size
((@c->lst.idx_lebs + 1) * sizeof(int)) of memory area is allocated before
do-while loop and can not be changed in the loop. But @c->lst.idx_lebs
could be increased by function ubifs_change_lp (called by
layout_leb_in_gaps->ubifs_find_dirty_idx_leb->get_idx_gc_leb) during the
loop. So, sometimes oob happens when number of cycles in do-while loop
exceeds the original value of @c->lst.idx_lebs. See detail in
https://bugzilla.kernel.org/show_bug.cgi?id=204229.
This patch fixes oob in layout_in_gaps.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
If there are more than one valid snod on the sleb->nodes list,
do_kill_orphans will malloc ino more than once without releasing
previous ino's memory. Finally, it will trigger memory leak.
Fixes: ee1438ce5d ("ubifs: Check link count of inodes when...")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This reverts commit 9163e0184b.
At the point when ubifs_fill_super() runs, we have already a reference
to the super block. So upon deactivate_locked_super() c will get
free()'ed via ->kill_sb().
Cc: Wenwen Wang <wenwen@cs.uga.edu>
Fixes: 9163e0184b ("ubifs: Fix memory leak bug in alloc_ubifs_info() error path")
Reported-by: https://twitter.com/grsecurity/status/1180609139359277056
Signed-off-by: Richard Weinberger <richard@nod.at>
Tested-by: Romain Izard <romain.izard.pro@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The sup->hash_algo is a __le16, and whilst 0xffff is
the same in __le16 and u16, it would be better to use
cpu_to_le16() anyway (which should deal with constants)
and silence the following sparse warning:
fs/ubifs/sb.c:187:32: warning: incorrect type in assignment (different base types)
fs/ubifs/sb.c:187:32: expected restricted __le16 [usertype] hash_algo
fs/ubifs/sb.c:187:32: got int
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
In the ubifs_jnl_write_inode() functon, it calls ubifs_iget()
with xent->inum. The xent->inum is __le64, but the ubifs_iget()
takes native cpu endian.
I think that this should be changed to passing le64_to_cpu(xent->inum)
to fix the following sparse warning:
fs/ubifs/journal.c:902:58: warning: incorrect type in argument 2 (different base types)
fs/ubifs/journal.c:902:58: expected unsigned long inum
fs/ubifs/journal.c:902:58: got restricted __le64 [usertype] inum
Fixes: 7959cf3a75 ("ubifs: journal: Handle xattrs like files")
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
In set_dent_cookie() the result of prandom_u32() is
assinged to an __le32 type. Make this a forced conversion
to remove the following sparse warning:
fs/ubifs/journal.c:506:30: warning: incorrect type in assignment (different base types)
fs/ubifs/journal.c:506:30: expected restricted __le32 [usertype] cookie
fs/ubifs/journal.c:506:30: got unsigned int
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
AFAICT this kind of problems are no longer possible since
debugfs gained file removal protection via
e9117a5a4b ("debugfs: implement per-file removal protection").
Cc: Christoph Hellwig <hch@lst.de>
Cc: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The leaf format xattr addition helper xfs_attr3_leaf_add_work()
adjusts the block freemap in a couple places. The first update drops
the size of the freemap that the caller had already selected to
place the xattr name/value data. Before the function returns, it
also checks whether the entries array has encroached on a freemap
range by virtue of the new entry addition. This is necessary because
the entries array grows from the start of the block (but end of the
block header) towards the end of the block while the name/value data
grows from the end of the block in the opposite direction. If the
associated freemap is already empty, however, size is zero and the
subtraction underflows the field and causes corruption.
This is reproduced rarely by generic/070. The observed behavior is
that a smaller sized freemap is aligned to the end of the entries
list, several subsequent xattr additions land in larger freemaps and
the entries list expands into the smaller freemap until it is fully
consumed and then underflows. Note that it is not otherwise a
corruption for the entries array to consume an empty freemap because
the nameval list (i.e. the firstused pointer in the xattr header)
starts beyond the end of the corrupted freemap.
Update the freemap size modification to account for the fact that
the freemap entry can be empty and thus stale.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Fix a few places where we xlog_alloc_buffer a buffer, hit an error, and
then bail out without freeing the buffer.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
-----BEGIN PGP SIGNATURE-----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=wP5w
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20191115' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few fixes that should make it into this release. This contains:
- io_uring:
- The timeout command assumes sequence == 0 means that we want
one completion, but this kind of overloading is unfortunate as
it prevents users from doing a pure time based wait. Since
this operation was introduced in this cycle, let's correct it
now, while we can. (me)
- One-liner to fix an issue with dependent links and fixed
buffer reads. The actual IO completed fine, but the link got
severed since we stored the wrong expected value. (me)
- Add TIMEOUT to list of opcodes that don't need a file. (Pavel)
- rsxx missing workqueue destry calls. Old bug. (Chuhong)
- Fix blk-iocost active list check (Jiufei)
- Fix impossible-to-hit overflow merge condition, that still hit some
folks very rarely (Junichi)
- Fix bfq hang issue from 5.3. This didn't get marked for stable, but
will go into stable post this merge (Paolo)"
* tag 'for-linus-20191115' of git://git.kernel.dk/linux-block:
rsxx: add missed destroy_workqueue calls in remove
iocost: check active_list of all the ancestors in iocg_activate()
block, bfq: deschedule empty bfq_queues not referred by any process
io_uring: ensure registered buffer import returns the IO length
io_uring: Fix getting file for timeout
block: check bi_size overflow before merge
io_uring: make timeout sequence == 0 mean no sequence
Pinned negative dentries can, generally, be made positive
by another thread. Conditions that prevent that are
* ->d_lock on dentry in question
* parent directory held at least shared
* nobody else could have observed the address of dentry
Most of the places working with those fall into one of those
categories; however, d_lookup() and friends need to be used
with some care. Fortunately, there's not a lot of call sites,
and with few exceptions all of those fall under one of the
cases above.
Exceptions are all in fs/namei.c - in lookup_fast(), lookup_dcache()
and mountpoint_last(). Another one is lookup_slow() - there
dcache lookup is done with parent held shared, but the result
is used after we'd drop the lock. The same happens in do_last() -
the lookup (in lookup_one()) is done with parent locked, but
result is used after unlocking.
lookup_fast(), do_last() and mountpoint_last() flat-out reject
negatives.
Most of lookup_dcache() calls are made with parent locked at least
shared; the only exception is lookup_one_len_unlocked(). It might
return pinned negative, needs serious care from callers. Fortunately,
almost nobody calls it directly anymore; all but two callers have
converted to lookup_positive_unlocked(), which rejects negatives.
lookup_slow() is called by the same lookup_one_len_unlocked() (see
above), mountpoint_last() and walk_component(). In those two negatives
are rejected.
In other words, there is a small set of places where we need to
check carefully if a pinned potentially negative dentry is, in
fact, positive. After that check we want to be sure that both
->d_inode and type bits in ->d_flags are stable and observed.
The set consists of follow_managed() (where the rejection happens
for lookup_fast(), walk_component() and do_last()), last_mountpoint()
and lookup_positive_unlocked().
Solution:
1) transition from negative to positive (in __d_set_inode_and_type())
stores ->d_inode, then uses smp_store_release() to set ->d_flags type bits.
2) aforementioned 3 places in fs/namei.c fetch ->d_flags with
smp_load_acquire() and bugger off if it type bits say "negative".
That way anyone downstream of those checks has dentry know positive pinned,
with ->d_inode and type bits of ->d_flags stable and observed.
I considered splitting off d_lookup_positive(), so that the checks could
be done right there, under ->d_lock. However, that leads to massive
duplication of rather subtle code in fs/namei.c and fs/dcache.c. It's
worse than it might seem, thanks to autofs ->d_manage() getting involved ;-/
No matter what, autofs_d_manage()/autofs_d_automount() must live with
the possibility of pinned negative dentry passed their way, becoming
positive under them - that's the intended behaviour when lookup comes
in the middle of automount in progress, so we can't keep them out of
the area that has to deal with those, more's the pity...
Reported-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We are overoptimistic about taking the fast path there; seeing
the same value in ->d_parent after having grabbed a reference
to that parent does *not* mean that it has remained our parent
all along.
That wouldn't be a big deal (in the end it is our parent and
we have grabbed the reference we are about to return), but...
the situation with barriers is messed up.
We might have hit the following sequence:
d is a dentry of /tmp/a/b
CPU1: CPU2:
parent = d->d_parent (i.e. dentry of /tmp/a)
rename /tmp/a/b to /tmp/b
rmdir /tmp/a, making its dentry negative
grab reference to parent,
end up with cached parent->d_inode (NULL)
mkdir /tmp/a, rename /tmp/b to /tmp/a/b
recheck d->d_parent, which is back to original
decide that everything's fine and return the reference we'd got.
The trouble is, caller (on CPU1) will observe dget_parent()
returning an apparently negative dentry. It actually is positive,
but CPU1 has stale ->d_inode cached.
Use d->d_seq to see if it has been moved instead of rechecking ->d_parent.
NOTE: we are *NOT* going to retry on any kind of ->d_seq mismatch;
we just go into the slow path in such case. We don't wait for ->d_seq
to become even either - again, if we are racing with renames, we
can bloody well go to slow path anyway.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Most of the callers of lookup_one_len_unlocked() treat negatives are
ERR_PTR(-ENOENT). Provide a helper that would do just that. Note
that a pinned positive dentry remains positive - it's ->d_inode is
stable, etc.; a pinned _negative_ dentry can become positive at any
point as long as you are not holding its parent at least shared.
So using lookup_one_len_unlocked() needs to be careful;
lookup_positive_unlocked() is safer and that's what the callers
end up open-coding anyway.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
There are 4 callers; two proceed to check if result is positive and
fail with ENOENT if it isn't; one (in handle_lookup_down()) is
guaranteed to yield positive and one (in lookup_fast()) is _preceded_
by positivity check.
However, follow_managed() on a negative dentry is a (fairly cheap)
no-op on anything other than autofs. And negative autofs dentries
are never hashed, so lookup_fast() is not going to run into one
of those. Moreover, successful follow_managed() on a _positive_
dentry never yields a negative one (and we significantly rely upon
that in callers of lookup_fast()).
In other words, we can easily transpose the positivity check and
the call of follow_managed() in lookup_fast(). And that allows
to fold the positivity check *into* follow_managed(), simplifying
life for the code downstream of its calls.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
patch that went into -rc1 and a fixup for a bogus warning on older
gcc versions.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAl3O2RMTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi+k6CACf0hUTyWcJaiH3WAmkpKOnZVG//Ghv
+hDWskib0gSilW+mx8Cjsndb5rXVuE4MhZ9P1VD1MMhhfVlfTUspCPG6cIQ3B3gd
jEVLHDALaMc/tpKwa6EbxvxQRAL5D/2Umh8aK1kVMX2U9R6KKfMiRVToHVPewSkS
eM3HJuV0kUonnD6glHyie1iwI9iFkDgt+eTJR1hpiFx26y6TwVCH5RNNvZGr0Tcf
KMLgwAHxIowx0SxblvbJTMf1iIoPJNiUuZyBoo0Hli9hI7S/b4XfARAkD9eud02d
4shv7D9Js0V1tKDsfV/c8UpnOgBTGEY4AEXIN3Mm6Gk6q9pMnobWt+l8
=kIHR
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.4-rc8' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"Two fixes for the buffered reads and O_DIRECT writes serialization
patch that went into -rc1 and a fixup for a bogus warning on older gcc
versions"
* tag 'ceph-for-5.4-rc8' of git://github.com/ceph/ceph-client:
rbd: silence bogus uninitialized warning in rbd_object_map_update_finish()
ceph: increment/decrement dio counter on async requests
ceph: take the inode lock before acquiring cap refs
When a lookup is done, the afs filesystem will perform a bulk status-fetch
operation on the requested vnode (file) plus the next 49 other vnodes from
the directory list (in AFS, directory contents are downloaded as blobs and
parsed locally). When the results are received, it will speculatively
populate the inode cache from the extra data.
However, if the lookup races with another lookup on the same directory, but
for a different file - one that's in the 49 extra fetches, then if the bulk
status-fetch operation finishes first, it will try and update the inode
from the other lookup.
If this other inode is still in the throes of being created, however, this
will cause an assertion failure in afs_apply_status():
BUG_ON(test_bit(AFS_VNODE_UNSET, &vnode->flags));
on or about fs/afs/inode.c:175 because it expects data to be there already
that it can compare to.
Fix this by skipping the update if the inode is being created as the
creator will presumably set up the inode with the same information.
Fixes: 39db9815da ("afs: Fix application of the results of a inline bulk status fetch")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch closes a timing window in which two processes compete
and overlap in the execution of do_xmote for the same glock:
Process A Process B
------------------------------------ -----------------------------
1. Grabs gl_lockref and calls do_xmote
2. Grabs gl_lockref but is blocked
3. Sets GLF_INVALIDATE_IN_PROGRESS
4. Unlocks gl_lockref
5. Calls do_xmote
6. Call glops->go_sync
7. test_and_clear_bit GLF_DIRTY
8. Call gfs2_log_flush Call glops->go_sync
9. (slow IO, so it blocks a long time) test_and_clear_bit GLF_DIRTY
It's not dirty (step 7) returns
10. Tests GLF_INVALIDATE_IN_PROGRESS
11. Calls go_inval (rgrp_go_inval)
12. gfs2_rgrp_relse does brelse
13. truncate_inode_pages_range
14. Calls lm_lock UN
In step 14 we've just told dlm to give the glock to another node
when, in fact, process A has not finished the IO and synced all
buffer_heads to disk and make sure their revokes are done.
This patch fixes the problem by changing the GLF_INVALIDATE_IN_PROGRESS
to use test_and_set_bit, and if the bit is already set, process B just
ignores it and trusts that process A will do the do_xmote in the proper
order.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, an io error, such as -EIO writing to the journal
would cause function gfs2_freeze to go into an infinite loop,
continuously retrying the freeze operation. But nothing ever clears
the -EIO except unmount after withdraw, which is impossible if the
freeze operation never ends (fails). Instead you get:
[ 6499.767994] gfs2: fsid=dm-32.0: error freezing FS: -5
[ 6499.773058] gfs2: fsid=dm-32.0: retrying...
[ 6500.791957] gfs2: fsid=dm-32.0: error freezing FS: -5
[ 6500.797015] gfs2: fsid=dm-32.0: retrying...
This patch adds a check for -EIO in gfs2_freeze, and if seen, it
dequeues the freeze glock, aborts the loop and returns the error.
Also, there's no need to pass the freeze holder to function
gfs2_lock_fs_check_clean since it's only called in one place and
it's a well-known superblock pointer, so this simplifies that.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Pull misc vfs fixes from Al Viro:
"Assorted fixes all over the place; some of that is -stable fodder,
some regressions from the last window"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ecryptfs_lookup_interpose(): lower_dentry->d_parent is not stable either
ecryptfs_lookup_interpose(): lower_dentry->d_inode is not stable
ecryptfs: fix unlink and rmdir in face of underlying fs modifications
audit_get_nd(): don't unlock parent too early
exportfs_decode_fh(): negative pinned may become positive without the parent locked
cgroup: don't put ERR_PTR() into fc->root
autofs: fix a leak in autofs_expire_indirect()
aio: Fix io_pgetevents() struct __compat_aio_sigset layout
fs/namespace.c: fix use-after-free of mount in mnt_warn_timestamp_expiry()
Increase the threshold at which the reader sends a wake event to the
writers in the queue such that the queue must be half empty before the wake
is issued rather than the wake being issued when just a single slot
available.
This reduces the number of context switches in the tests significantly,
without altering the amount of work achieved. With my pipe-bench program,
there's a 20% reduction versus an unpatched kernel.
Suggested-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David Howells <dhowells@redhat.com>
Make pipe_write() check to see if the ring has become full between it
taking the pipe mutex, checking the ring status and then taking the
spinlock.
This can happen if a notification is written into the pipe as that happens
without the pipe mutex.
Signed-off-by: David Howells <dhowells@redhat.com>
Rearrange the sequence in pipe_write() so that the allocation of the new
buffer, the allocation of a ring slot and the attachment to the ring is
done under the pipe wait spinlock and then the lock is dropped and the
buffer can be filled.
The data copy needs to be done with the spinlock unheld and irqs enabled,
so the lock needs to be dropped first. However, the reader can't progress
as we're holding pipe->mutex.
We also need to drop the lock as that would impact others looking at the
pipe waitqueue, such as poll(), the consumer and a future kernel message
writer.
We just abandon the preallocated slot if we get a copy error. Future
writes may continue it and a future read will eventually recycle it.
Signed-off-by: David Howells <dhowells@redhat.com>
Only do a wakeup in pipe_read() if we made space in a completely full
buffer. The producer shouldn't be waiting on pipe->wait otherwise.
Signed-off-by: David Howells <dhowells@redhat.com>
Advance the pipe ring tail pointer inside of wait spinlock in pipe_read()
so that the pipe can be written into with kernel notifications from
contexts where pipe->mutex cannot be taken.
Signed-off-by: David Howells <dhowells@redhat.com>
Split pipe->ring_size into two numbers:
(1) pipe->ring_size - indicates the hard size of the pipe ring.
(2) pipe->max_usage - indicates the maximum number of pipe ring slots that
userspace orchestrated events can fill.
This allows for a pipe that is both writable by the general kernel
notification facility and by userspace, allowing plenty of ring space for
notifications to be added whilst preventing userspace from being able to
pin too much unswappable kernel space.
Signed-off-by: David Howells <dhowells@redhat.com>
timerfd_show() uses a 'struct itimerspec' internally, but that is
deprecated because of the time_t overflow and a conflict with the glibc
type of the same name that is now incompatible in user space.
Use a pair of timespec64 variables instead as a simple replacement.
As this removes the last use of itimerspec from the kernel, allowing the
removal of the definition from the uapi headers along with timespec and
timeval later.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We store elapsed time for a crashed process in struct elf_prstatus using
'timeval' structures. Once glibc starts using 64-bit time_t, this becomes
incompatible with the kernel's idea of timeval since the structure layout
no longer matches on 32-bit architectures.
This changes the definition of the elf_prstatus structure to use
__kernel_old_timeval instead, which is hardcoded to the currently used
binary layout. There is no risk of overflow in y2038 though, because
the time values are all relative times, and can store up to 68 years
of process elapsed time.
There is a risk of applications breaking at build time when they
use the new kernel headers and expect the type to be exactly 'timeval'
rather than a structure that has the same fields as before. Those
applications have to be modified to deal with 64-bit time_t anyway.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
All of the remaining syscalls that pass a timeval (gettimeofday, utime,
futimesat) can trivially be changed to pass a __kernel_old_timeval
instead, which has a compatible layout, but avoids ambiguity with
the timeval type in user space.
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
No need to wait for any commit once the page is fully truncated.
Besides, it may confuse e.g. concurrent ext4_writepage() with the page
still be dirty (will be cleared by truncate_pagecache() in
ext4_setattr()) but buffers has been freed; and then trigger a bug
show as below:
[ 26.057508] ------------[ cut here ]------------
[ 26.058531] kernel BUG at fs/ext4/inode.c:2134!
...
[ 26.088130] Call trace:
[ 26.088695] ext4_writepage+0x914/0xb28
[ 26.089541] writeout.isra.4+0x1b4/0x2b8
[ 26.090409] move_to_new_page+0x3b0/0x568
[ 26.091338] __unmap_and_move+0x648/0x988
[ 26.092241] unmap_and_move+0x48c/0xbb8
[ 26.093096] migrate_pages+0x220/0xb28
[ 26.093945] kernel_mbind+0x828/0xa18
[ 26.094791] __arm64_sys_mbind+0xc8/0x138
[ 26.095716] el0_svc_common+0x190/0x490
[ 26.096571] el0_svc_handler+0x60/0xd0
[ 26.097423] el0_svc+0x8/0xc
Run the procedure (generate by syzkaller) parallel with ext3.
void main()
{
int fd, fd1, ret;
void *addr;
size_t length = 4096;
int flags;
off_t offset = 0;
char *str = "12345";
fd = open("a", O_RDWR | O_CREAT);
assert(fd >= 0);
/* Truncate to 4k */
ret = ftruncate(fd, length);
assert(ret == 0);
/* Journal data mode */
flags = 0xc00f;
ret = ioctl(fd, _IOW('f', 2, long), &flags);
assert(ret == 0);
/* Truncate to 0 */
fd1 = open("a", O_TRUNC | O_NOATIME);
assert(fd1 >= 0);
addr = mmap(NULL, length, PROT_WRITE | PROT_READ,
MAP_SHARED, fd, offset);
assert(addr != (void *)-1);
memcpy(addr, str, 5);
mbind(addr, length, 0, 0, 0, MPOL_MF_MOVE);
}
And the bug will be triggered once we seen the below order.
reproduce1 reproduce2
... | ...
truncate to 4k |
change to journal data mode |
| memcpy(set page dirty)
truncate to 0: |
ext4_setattr: |
... |
ext4_wait_for_tail_page_commit |
| mbind(trigger bug)
truncate_pagecache(clean dirty)| ...
... |
mbind will call ext4_writepage() since the page still be dirty, and then
report the bug since the buffers has been free. Fix it by return
directly once offset equals to 0 which means the page has been fully
truncated.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: yangerkun <yangerkun@huawei.com>
Link: https://lore.kernel.org/r/20190919063508.1045-1-yangerkun@huawei.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Now the checks in ext4_get_next_id() and dquot_get_next_id()
are almost the same, so just call dquot_get_next_id() instead
of ext4_get_next_id().
Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Link: https://lore.kernel.org/r/20191006103028.31299-1-cgxu519@mykernel.net
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit 8fcc3a5806 ("ext4: rework reserved cluster accounting when
invalidating pages") moved freeing of delayed allocation reservations
from dirty page invalidation time to time when we evict corresponding
status extent from extent status tree. For inodes which don't have any
blocks allocated this may actually happen only in ext4_clear_blocks()
which is after we've dropped references to quota structures from the
inode. Thus reservation of quota leaked. Fix the problem by clearing
quota information from the inode only after evicting extent status tree
in ext4_clear_inode().
Link: https://lore.kernel.org/r/20191108115420.GI20863@quack2.suse.cz
Reported-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Fixes: 8fcc3a5806 ("ext4: rework reserved cluster accounting when invalidating pages")
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit c33fbe8f67 ("ext4: Enable blocksize < pagesize for
dioread_nolock") removed the only user of 'sbi' outside of the ifdef,
so it caused a new warning:
fs/ext4/super.c:2068:23: warning: unused variable 'sbi' [-Wunused-variable]
Fixes: c33fbe8f67 ("ext4: Enable blocksize < pagesize for dioread_nolock")
Signed-off-by: Olof Johansson <olof@lixom.net>
Link: https://lore.kernel.org/r/20191111022523.34256-1-olof@lixom.net
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Now that we have the code to support encryption for subpage-sized
blocks, this commit removes the conditional check in filesystem mount
code.
The commit also changes the support statement in
Documentation/filesystems/fscrypt.rst to reflect the fact that
encryption on filesystems with blocksize less than page size now works.
[EB: Tested with 'gce-xfstests -c ext4/encrypt_1k -g auto', using the
new "encrypt_1k" config I created. All tests pass except for those that
already fail or are excluded with the encrypt or 1k configs, and 2 tests
that try to create 1023-byte symlinks which fails since encrypted
symlinks are limited to blocksize-3 bytes. Also ran the dedicated
encryption tests using 'kvm-xfstests -c ext4/1k -g encrypt'; all pass,
including the on-disk ciphertext verification tests.]
Signed-off-by: Chandan Rajendra <chandan@linux.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20191023033312.361355-3-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After each filesystem block (as represented by a buffer_head) has been
read from disk by block_read_full_page(), decrypt it if needed. The
decryption is done on the fscrypt_read_workqueue.
This is the final change needed to support ext4 encryption with
blocksize != PAGE_SIZE, and it's a fairly small change now that
CONFIG_FS_ENCRYPTION is a bool and fs/crypto/ exposes functions to
decrypt individual blocks and to enqueue work on the fscrypt workqueue.
Don't try to add fs-verity support yet, as the fs/verity/ support layer
isn't ready for sub-page blocks yet. Just add fscrypt support for now.
Almost all the new code is compiled away when CONFIG_FS_ENCRYPTION=n.
Cc: Chandan Rajendra <chandan@linux.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20191023033312.361355-2-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
One of the obvious use cases for these commands is networking, where
it's not uncommon to have tons of sockets open and polled for. The
current implementation uses a list for insertion and lookup, which works
fine for file based use cases where the count is usually low, it breaks
down somewhat for higher number of files / sockets. A test case with
30k sockets being polled for and cancelled takes:
real 0m6.968s
user 0m0.002s
sys 0m6.936s
with the patch it takes:
real 0m0.233s
user 0m0.010s
sys 0m0.176s
If you go to 50k sockets, it gets even more abysmal with the current
code:
real 0m40.602s
user 0m0.010s
sys 0m40.555s
with the patch it takes:
real 0m0.398s
user 0m0.000s
sys 0m0.341s
Change is pretty straight forward, just replace the cancel_list with
a red/black tree instead.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Before this patch, function gfs2_freeze would loop forever if the
filesystem it tries to freeze is withdrawn. That's because function
gfs2_lock_fs_check_clean tries to enqueue the glock of the journal and
the gfs2_glock returns -EIO because you can't enqueue a journaled glock
after a withdraw.
Move the check for file system withdraw inside the loop so that the loop
can end when withdraw occurs.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch, an IO error encountered in function gfs2_ail1_flush
would cause a deadlock: because of the io error (and its resulting
withdrawn state), buffers stopped being written to the journal.
Buffers would remain on the ail1 list, so gfs2_ail1_start_one would
return 1 to indicate dirty buffers were still on the ail1 list.
However, when function gfs2_ail1_flush got a non-zero return code,
it would goto restart to retry the writes, which meant it would never
finish, and thus the infinite loop.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Add function gfs2_withdrawn and replace all checks for the SDF_WITHDRAWN
bit to call it. This does not change the logic or function of gfs2, and
it facilitates later improvements to the withdraw sequence.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Ceph can in some cases issue an async DIO request, in which case we can
end up calling ceph_end_io_direct before the I/O is actually complete.
That may allow buffered operations to proceed while DIO requests are
still in flight.
Fix this by incrementing the i_dio_count when issuing an async DIO
request, and decrement it when tearing down the aio_req.
Fixes: 321fe13c93 ("ceph: add buffered/direct exclusionary locking for reads and writes")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Most of the time, we (or the vfs layer) takes the inode_lock and then
acquires caps, but ceph_read_iter does the opposite, and that can lead
to a deadlock.
When there are multiple clients treading over the same data, we can end
up in a situation where a reader takes caps and then tries to acquire
the inode_lock. Another task holds the inode_lock and issues a request
to the MDS which needs to revoke the caps, but that can't happen until
the inode_lock is unwedged.
Fix this by having ceph_read_iter take the inode_lock earlier, before
attempting to acquire caps.
Fixes: 321fe13c93 ("ceph: add buffered/direct exclusionary locking for reads and writes")
Link: https://tracker.ceph.com/issues/36348
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Commit 9287c6452d fixed a situation in which gfs2 could use a glock
after it had been freed. To do that, it temporarily added a new glock
reference by calling gfs2_glock_hold in function gfs2_add_revoke.
However, if the bd element was removed by gfs2_trans_remove_revoke, it
failed to drop the additional reference.
This patch adds logic to gfs2_trans_remove_revoke to properly drop the
additional glock reference.
Fixes: 9287c6452d ("gfs2: Fix occasional glock use-after-free")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Function gfs2_log_shutdown is only called from within log.c. This
patch removes the extern declaration and makes it static.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Since we don't iterate these lists anymore after commit:
e61df66c69 ("io-wq: ensure free/busy list browsing see all items")
we don't need to retain the nulls value we use for them. That means it's
pretty pointless to wrap the hlist_nulls_head in a structure, so get rid
of it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Both callers of check_disk_size_change clear bd_invalidate directly
after the call, so move the clearing into check_disk_size_change
itself.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In general drivers should never mess with partition tables directly.
Unfortunately s390 and loop do for somewhat historic reasons, but they
can use bdev_disk_changed directly instead when we export it as they
satisfy the sanity checks we have in __blkdev_reread_part.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com> [dasd]
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We still have to set the capacity to 0 if invalidating or call
revalidate_disk if not even if the disk has no partitions. Fix
that by merging rescan_partitions into bdev_disk_changed and just
stubbing out blk_add_partitions and blk_drop_partitions for
non-partitioned devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Large parts of rescan_partitions aren't about partitions, and
moving it to block_dev.c will allow for some further cleanups by
merging it into its only caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A lot of the logic in invalidate_partitions and rescan_partitions is
shared. Merge the two functions to simplify things. There is a small
behavior change in that we now send the kevent change notice also if we
were not invalidating but no partitions were found, which seems like
the right thing to do.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For timeout requests and bunch of others io_uring tries to grab a file
with specified fd, which is usually stdin/fd=0.
Update io_op_needs_file()
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We don't use the return value anymore, drop it. Also drop the
unecessary double cancel_req value check.
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have two lists for workers in io-wq, a busy and a free list. For
certain operations we want to browse all workers, and we currently do
that by browsing the two separate lists. But since these lists are RCU
protected, we can potentially miss workers if they move between the two
lists while we're browsing them.
Add a third list, all_list, that simply holds all workers. A worker is
added to that list when it starts, and removed when it exits. This makes
the worker iteration cleaner, too.
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix missing include of xfs_filestream.h in xfs_filestream.c so that we
actually check the function declarations against the definitions.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Thes ioctls set DMAPI specific flags in the on-disk inode, but there is
no way to actually ever query those flags. The only known user is
xfsrestore with the -D option, which is documented to be only useful
inside a DMAPI enviroment, which isn't supported by upstream XFS.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Remove duplicated include.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Remove some unused typedef'd simple types, and some unused
structure members.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Remove some typdefs for type_t's that are no longer referred to
by their typedef'd types.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Pavel Reichl <preichl@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: fix typo in subject line]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Pavel Reichl <preichl@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: fix a comment]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Pavel Reichl <preichl@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Pavel Reichl <preichl@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
A test case was reported where two linked reads with registered buffers
failed the second link always. This is because we set the expected value
of a request in req->result, and if we don't get this result, then we
fail the dependent links. For some reason the registered buffer import
returned -ERROR/0, while the normal import returns -ERROR/length. This
broke linked commands with registered buffers.
Fix this by making io_import_fixed() correctly return the mapped length.
Cc: stable@vger.kernel.org # v5.3
Reported-by: 李通洲 <carter.li@eoitek.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For timeout requests io_uring tries to grab a file with specified fd,
which is usually stdin/fd=0.
Update io_op_needs_file()
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
worker->cur_work is currently protected by the lock of the wqe that the
worker belongs to. When we send a signal to a worker, we need a stable
view of ->cur_work, so we need to hold that lock. But this doesn't work
so well, since we have the opposite order potentially on queueing work.
If POLL_ADD is used with a signalfd, then io_poll_wake() is called with
the signal lock, and that sometimes needs to insert work items.
Add a specific worker lock that protects the current work item. Then we
can guarantee that the task we're sending a signal is currently
processing the exact work we think it is.
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Set the STATX_ATTR_VERITY bit when the statx() system call is used on a
verity file on ext4.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Eric Biggers <ebiggers@google.com>
-----BEGIN PGP SIGNATURE-----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=xzXs
-----END PGP SIGNATURE-----
Merge tag 'for-5.4-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"A fix for an older bug that has started to show up during testing
(because of an updated test for rename exchange).
It's an in-memory corruption caused by local variable leaking out of
the function scope"
* tag 'for-5.4-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix log context list corruption after rename exchange operation
Signed-off-by: Pavel Reichl <preichl@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: fix some of the comments]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The ioctl definitions for XFS_IOC_SWAPEXT, XFS_IOC_FSBULKSTAT and
XFS_IOC_FSBULKSTAT_SINGLE are part of libxfs and based on time_t.
The definition for time_t differs between current kernels and coming
32-bit libc variants that define it as 64-bit. For most ioctls, that
means the kernel has to be able to handle two different command codes
based on the different structure sizes.
The same solution could be applied for XFS_IOC_SWAPEXT, but it would
not work for XFS_IOC_FSBULKSTAT and XFS_IOC_FSBULKSTAT_SINGLE because
the structure with the time_t is passed through an indirect pointer,
and the command number itself is based on struct xfs_fsop_bulkreq,
which does not differ based on time_t.
This means any solution that can be applied requires a change of the
ABI definition in the xfs_fs.h header file, as well as doing the same
change in any user application that contains a copy of this header.
The usual solution would be to define a replacement structure and
use conditional compilation for the ioctl command codes to use
one or the other, such as
#define XFS_IOC_FSBULKSTAT_OLD _IOWR('X', 101, struct xfs_fsop_bulkreq)
#define XFS_IOC_FSBULKSTAT_NEW _IOWR('X', 129, struct xfs_fsop_bulkreq)
#define XFS_IOC_FSBULKSTAT ((sizeof(time_t) == sizeof(__kernel_long_t)) ? \
XFS_IOC_FSBULKSTAT_OLD : XFS_IOC_FSBULKSTAT_NEW)
After this, the kernel would be able to implement both
XFS_IOC_FSBULKSTAT_OLD and XFS_IOC_FSBULKSTAT_NEW handlers on
32-bit architectures with the correct ABI for either definition
of time_t.
However, as long as two observations are true, a much simpler solution
can be used:
1. xfsprogs is the only user space project that has a copy of this header
2. xfsprogs already has a replacement for all three affected ioctl commands,
based on the xfs_bulkstat structure to pass 64-bit timestamps
regardless of the architecture
Based on those assumptions, changing xfs_bstime to use __kernel_long_t
instead of time_t in both the kernel and in xfsprogs preserves the current
ABI for any libc definition of time_t and solves the problem of passing
64-bit timestamps to 32-bit user space.
If either of the two assumptions is invalid, more discussion is needed
for coming up with a way to fix as much of the affected user space
code as possible.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When target_ip exists in xfs_rename(), the xfs_dir_replace() call may
need to hold the AGF lock to allocate more blocks, and then invoking
the xfs_droplink() call to hold AGI lock to drop target_ip onto the
unlinked list, so we get the lock order AGF->AGI. This would break the
ordering constraint on AGI and AGF locking - inode allocation locks
the AGI, then can allocate a new extent for new inodes, locking the
AGF after the AGI.
In this patch we check whether the replace operation need more
blocks firstly. If so, acquire the agi lock firstly to preserve
locking order(AGI/AGF). Actually, the locking order problem only
occurs when we are locking the AGI/AGF of the same AG. For multiple
AGs the AGI lock will be released after the transaction committed.
Signed-off-by: kaixuxia <kaixuxia@tencent.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: reword the comment]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We have the exact same memset in xfs_inode_alloc, which is always called
just before xfs_iread.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There is no point in splitting the fields like this in an purely
in-memory structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
struct xfs_icdinode is purely an in-memory data structure, so don't use
a log on-disk structure for it. This simplifies the code a bit, and
also reduces our include hell slightly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: fix a minor indenting problem in xfs_trans_ichgtime]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Instead of causing a relatively expensive indirect call for each
hashing and comparism of a file name in a directory just use an
inline function and a simple branch on the ASCII CI bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: fix unused variable warning]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Convert the last of the open coded corruption check and report idioms to
use the XFS_IS_CORRUPT macro.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
For cancellation, we need to ensure that the work item stays valid for
as long as ->cur_work is valid. Right now we can't safely dereference
the work item even under the wqe->lock, because while the ->cur_work
pointer will remain valid, the work could be completing and be freed
in parallel.
Only invoke ->get/put_work() on items we know that the caller queued
themselves. Add IO_WQ_WORK_INTERNAL for io-wq to use, which is needed
when we're queueing a flush item, for instance.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If nfs4_delegreturn_prepare needs to wait for a layoutreturn to complete
then make sure we drop the sequence slot if we hold it.
Fixes: 1c5bd76d17 ("pNFS: Enable layoutreturn operation for return-on-close")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the server returns a bad or dead session error, the we don't want
to update the session slot number, but just immediately schedule
recovery and allow it to proceed.
We can/should then remove handling in other places
Fixes: 3453d5708b ("NFSv4.1: Avoid false retries when RPC calls are interrupted")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Since it stores CLOCK_BOOTTIME, not, as the name suggests,
CLOCK_REALTIME, let's rename ->real_start_time to ->start_bootime.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Avoid the need to allocate a potentially large array of struct blk_zone
in the block layer by switching the ->report_zones method interface to
a callback model. Now the caller simply supplies a callback that is
executed on each reported zone, and private data for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new macro, XFS_IS_CORRUPT, which we will use to integrate some
corruption reporting when the corruption test expression is true. This
will be used in the next patch to remove the ugly XFS_WANT_CORRUPT*
macros.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The new nfsdcld client tracking operations use sha256 to compute hashes
of the kerberos principals, so make sure CRYPTO_SHA256 is enabled.
Fixes: 6ee95d1c89 ("nfsd: add support for upcall version 2")
Reported-by: Jamie Heilman <jamie@audible.transient.net>
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Don't assign an error pointer to cld_net->cn_tfm, otherwise an oops will
occur in nfsd4_remove_cld_pipe().
Also, move the initialization of cld_net->cn_tfm so that it occurs after
the check to see if nfsdcld is running. This is necessary because
nfsd4_client_tracking_init() looks for -ETIMEDOUT to determine whether
to use the "old" nfsdcld tracking ops.
Fixes: 6ee95d1c89 ("nfsd: add support for upcall version 2")
Reported-by: Jamie Heilman <jamie@audible.transient.net>
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We attempt to run the poll completion inline, but we're using trylock to
do so. This avoids a deadlock since we're grabbing the locks in reverse
order at this point, we already hold the poll wq lock and we're trying
to grab the completion lock, while the normal rules are the reverse of
that order.
IO completion for a timeout link will need to grab the completion lock,
but that's not safe from this context. Put the completion under the
completion_lock in io_poll_wake(), and mark the request as entering
the completion with the completion_lock already held.
Fixes: 2665abfd75 ("io_uring: add support for linked SQE timeouts")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Each kernfs_node is identified with a 64bit ID. The low 32bit is
exposed as ino and the high gen. While this already allows using inos
as keys by looking up with wildcard generation number of 0, it's
adding unnecessary complications for 64bit ino archs which can
directly use kernfs_node IDs as inos to uniquely identify each cgroup
instance.
This patch exposes IDs directly as inos on 64bit ino archs. The
conversion is mostly straight-forward.
* 32bit ino archs behave the same as before. 64bit ino archs now use
the whole 64bit ID as ino and the generation number is fixed at 1.
* 64bit inos still use the same idr allocator which gurantees that the
lower 32bits identify the current live instance uniquely and the
high 32bits are incremented whenever the low bits wrap. As the
upper 32bits are no longer used as gen and we don't wanna start ino
allocation with 33rd bit set, the initial value for highbits
allocation is changed to 0 on 64bit ino archs.
* blktrace exposes two 32bit numbers - (INO,GEN) pair - to identify
the issuing cgroup. Userland builds FILEID_INO32_GEN fids from
these numbers to look up the cgroups. To remain compatible with the
behavior, always output (LOW32,HIGH32) which will be constructed
back to the original 64bit ID by __kernfs_fh_to_dentry().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
The current kernfs exportfs implementation uses the generic_fh_*()
helpers and FILEID_INO32_GEN[_PARENT] which limits ino to 32bits.
Let's implement custom exportfs operations and fid type to remove the
restriction.
* FILEID_KERNFS is a single u64 value whose content is
kernfs_node->id. This is the only native fid type.
* For backward compatibility with blk_log_action() path which exposes
(ino,gen) pairs which userland assembles into FILEID_INO32_GEN keys,
combine the generic keys into 64bit IDs in the same order.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
kernfs_find_and_get_node_by_ino() looks the kernfs_node matching the
specified ino. On top of that, kernfs_get_node_by_id() and
kernfs_fh_get_inode() implement full ID matching by testing the rest
of ID.
On surface, confusingly, the two are slightly different in that the
latter uses 0 gen as wildcard while the former doesn't - does it mean
that the latter can't uniquely identify inodes w/ 0 gen? In practice,
this is a distinction without a difference because generation number
starts at 1. There are no actual IDs with 0 gen, so it can always
safely used as wildcard.
Let's simplify the code by renaming kernfs_find_and_get_node_by_ino()
to kernfs_find_and_get_node_by_id(), moving all lookup logics into it,
and removing now unnecessary kernfs_get_node_by_id().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs_node->id is currently a union kernfs_node_id which represents
either a 32bit (ino, gen) pair or u64 value. I can't see much value
in the usage of the union - all that's needed is a 64bit ID which the
current code is already limited to. Using a union makes the code
unnecessarily complicated and prevents using 64bit ino without adding
practical benefits.
This patch drops union kernfs_node_id and makes kernfs_node->id a u64.
ino is stored in the lower 32bits and gen upper. Accessors -
kernfs[_id]_ino() and kernfs[_id]_gen() - are added to retrieve the
ino and gen. This simplifies ID handling less cumbersome and will
allow using 64bit inos on supported archs.
This patch doesn't make any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Alexei Starovoitov <ast@kernel.org>
kernfs node can be created in two separate steps - allocation and
activation. This is used to make kernfs nodes visible only after the
internal states attached to the node are fully initialized.
kernfs_find_and_get_node_by_id() currently allows lookups of nodes
which aren't activated yet and thus can expose nodes are which are
still being prepped by kernfs users.
Fix it by disallowing lookups of nodes which aren't activated yet.
kernfs_find_and_get_node_by_ino()
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
kernfs_find_and_get_node_by_ino() uses RCU protection. It's currently
a bit buggy because it can look up a node which hasn't been activated
yet and thus may end up exposing a node that the kernfs user is still
prepping.
While it can be fixed by pushing it further in the current direction,
it's already complicated and isn't clear whether the complexity is
justified. The main use of kernfs_find_and_get_node_by_ino() is for
exportfs operations. They aren't super hot and all the follow-up
operations (e.g. mapping to path) use normal locking anyway.
Let's switch to a dumber locking scheme and protect the lookup with
kernfs_idr_lock.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
When the 32bit ino wraps around, kernfs increments the generation
number to distinguish reused ino instances. The wrap-around detection
tests whether the allocated ino is lower than what the cursor but the
cursor is pointing to the next ino to allocate so the condition never
triggers.
Fix it by remembering the last ino and comparing against that.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 4a3ef68aca ("kernfs: implement i_generation")
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org # v4.14+
Since we switched to io-wq, the dependent link optimization for when to
pass back work inline has been broken. Fix this by providing a suitable
io-wq helper for io_uring to use to detect when to do this.
Fixes: 561fb04a6a ("io_uring: replace workqueue usage with io-wq")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Function gfs2_write_log_header can be used to write a log header into any of
the journals of a filesystem. When used on the node's own journal,
gfs2_write_log_header advances the current position in the log
(sdp->sd_log_flush_head) as a side effect, through function gfs2_log_bmap.
This is confusing, and it also means that we can't use gfs2_log_bmap for other
journals even if they have an extent map. So clean this mess up by not
advancing sdp->sd_log_flush_head in gfs2_write_log_header or gfs2_log_bmap
anymore and making that a responsibility of the callers instead.
This is related to commit 7c70b89695 ("gfs2: clean_journal improperly set
sd_log_flush_head").
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
There expect the 'static' keyword to come first in a declaration, and we
get warnings like this with "make W=1":
fs/fuse/virtio_fs.c:687:1: warning: 'static' is not at beginning of declaration [-Wold-style-declaration]
fs/fuse/virtio_fs.c:692:1: warning: 'static' is not at beginning of declaration [-Wold-style-declaration]
fs/fuse/virtio_fs.c:1029:1: warning: 'static' is not at beginning of declaration [-Wold-style-declaration]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When adding a new hard link, make sure that i_nlink doesn't overflow.
Fixes: ac45d61357 ("fuse: fix nlink after unlink")
Cc: <stable@vger.kernel.org> # v3.4
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Make sure filesystem is not returning a bogus number of bytes written.
Fixes: ea9b9907b8 ("fuse: implement perform_write")
Cc: <stable@vger.kernel.org> # v2.6.26
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
If a filesystem returns negative inode sizes, future reads on the file were
causing the cpu to spin on truncate_pagecache.
Create a helper to validate the attributes. This now does two things:
- check the file mode
- check if the file size fits in i_size without overflowing
Reported-by: Arijit Banerjee <arijit@rubrik.com>
Fixes: d8a5ba4545 ("[PATCH] FUSE - core")
Cc: <stable@vger.kernel.org> # v2.6.14
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Currently we make sequence == 0 be the same as sequence == 1, but that's
not super useful if the intent is really to have a timeout that's just
a pure timeout.
If the user passes in sqe->off == 0, then don't apply any sequence logic
to the request, let it purely be driven by the timeout specified.
Reported-by: 李通洲 <carter.li@eoitek.com>
Reviewed-by: 李通洲 <carter.li@eoitek.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If you prep a read (for example) that needs to get punted to async
context with a timer, if the timeout is sufficiently short, the timer
request will get completed with -ENOENT as it could not find the read.
The issue is that we prep and start the timer before we start the read.
Hence the timer can trigger before the read is even started, and the end
result is then that the timer completes with -ENOENT, while the read
starts instead of being cancelled by the timer.
Fix this by splitting the linked timer into two parts:
1) Prep and validate the linked timer
2) Start timer
The read is then started between steps 1 and 2, so we know that the
timer will always have a consistent view of the read request state.
Reported-by: Hrvoje Zeba <zeba.hrvoje@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We can't safely cancel under the inflight lock. If the work hasn't been
started yet, then io_wq_cancel_work() simply marks the work as cancelled
and invokes the work handler. But if the work completion needs to grab
the inflight lock because it's grabbing user files, then we'll deadlock
trying to finish the work as we already hold that lock.
Instead grab a reference to the request, if it isn't already zero. If
it's zero, then we know it's going through completion anyway, and we
can safely ignore it. If it's not zero, then we can drop the lock and
attempt to cancel from there.
This also fixes a missing finish_wait() at the end of
io_uring_cancel_files().
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that we have backpressure, for SQPOLL, we have one more condition
that warrants flagging that the application needs to enter the kernel:
we failed to submit IO due to backpressure. Make sure we catch that
and flag it appropriately.
If we run into backpressure issues with the SQPOLL thread, flag it
as such to the application by setting IORING_SQ_NEED_WAKEUP. This will
cause the application to enter the kernel, and that will flush the
backlog and clear the condition.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's a little confusing that we have multiple types of command
cancellation opcodes now that we have a generic one. Make the generic
one work with POLL_ADD and TIMEOUT commands as well, that makes for an
easier to use API for the application. The fact that they currently
don't is a bit confusing.
Add a helper that takes care of it, so we can user it from both
IORING_OP_ASYNC_CANCEL and from the linked timeout cancellation.
Reported-by: Hrvoje Zeba <zeba.hrvoje@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
One thing that really sucks for userspace APIs is if the kernel passes
back -ENOMEM/-EAGAIN for resource shortages. The application really has
no idea of what to do in those cases. Should it try and reap
completions? Probably a good idea. Will it solve the issue? Who knows.
This patch adds a simple fallback mechanism if we fail to allocate
memory for a request. If we fail allocating memory from the slab for a
request, we punt to a pre-allocated request. There's just one of these
per io_ring_ctx, but the important part is if we ever return -EBUSY to
the application, the applications knows that it can wait for events and
make forward progress when events have completed. This is the important
part.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Naresh reported LTP diotest4 failing for 32bit x86 and arm -next
kernels on ext4. Same problem exists in 5.4-rc7 on xfs.
The failure comes down to:
openat(AT_FDCWD, "testdata-4.5918", O_RDWR|O_DIRECT) = 4
mmap2(NULL, 4096, PROT_READ, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f7b000
read(4, 0xb7f7b000, 4096) = 0 // expects -EFAULT
Problem is conversion at iomap_dio_bio_actor() return. Ternary
operator has a return type and an attempt is made to convert each
of operands to the type of the other. In this case "ret" (int)
is converted to type of "copied" (unsigned long). Both have size
of 4 bytes:
size_t copied = 0;
int ret = -14;
long long actor_ret = copied ? copied : ret;
On x86_64: actor_ret == -14;
On x86 : actor_ret == 4294967282
Replace ternary operator with 2 return statements to avoid this
unwanted conversion.
Fixes: 4721a60109 ("iomap: dio data corruption and spurious errors when pipes fill")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Make sure we attach dquots to both inodes before swapping their extents.
This was found via manual code inspection by looking for places where we
could call xfs_trans_mod_dquot without dquots attached to inodes, and
confirmed by instrumenting the kernel and running xfs/328.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In xfs_iomap_write_unwritten, we need to ensure that dquots are attached
to the inode and quota blocks reserved so that we capture in the quota
counters any blocks allocated to handle a bmbt split. This can happen
on the first unwritten extent conversion to a preallocated sparse file
on a fresh mount.
This was found by running generic/311 with quotas enabled. The bug
seems to have been introduced in "[XFS] rework iocore infrastructure,
remove some code and make it more" from ~2002?
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Coverity points out that xfs_btree_islastblock doesn't check the return
value of xfs_btree_check_block. Since the question "Does the cursor
point to the last block in this level?" only makes sense if the caller
previously performed a lookup or seek operation, the block should
already have been checked.
Therefore, check the return value in an ASSERT and turn the whole thing
into a static inline predicate.
Coverity-id: 114069
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
During rename exchange we might have successfully log the new name in the
source root's log tree, in which case we leave our log context (allocated
on stack) in the root's list of log contextes. However we might fail to
log the new name in the destination root, in which case we fallback to
a transaction commit later and never sync the log of the source root,
which causes the source root log context to remain in the list of log
contextes. This later causes invalid memory accesses because the context
was allocated on stack and after rename exchange finishes the stack gets
reused and overwritten for other purposes.
The kernel's linked list corruption detector (CONFIG_DEBUG_LIST=y) can
detect this and report something like the following:
[ 691.489929] ------------[ cut here ]------------
[ 691.489947] list_add corruption. prev->next should be next (ffff88819c944530), but was ffff8881c23f7be4. (prev=ffff8881c23f7a38).
[ 691.489967] WARNING: CPU: 2 PID: 28933 at lib/list_debug.c:28 __list_add_valid+0x95/0xe0
(...)
[ 691.489998] CPU: 2 PID: 28933 Comm: fsstress Not tainted 5.4.0-rc6-btrfs-next-62 #1
[ 691.490001] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
[ 691.490003] RIP: 0010:__list_add_valid+0x95/0xe0
(...)
[ 691.490007] RSP: 0018:ffff8881f0b3faf8 EFLAGS: 00010282
[ 691.490010] RAX: 0000000000000000 RBX: ffff88819c944530 RCX: 0000000000000000
[ 691.490011] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffffffffa2c497e0
[ 691.490013] RBP: ffff8881f0b3fe68 R08: ffffed103eaa4115 R09: ffffed103eaa4114
[ 691.490015] R10: ffff88819c944000 R11: ffffed103eaa4115 R12: 7fffffffffffffff
[ 691.490016] R13: ffff8881b4035610 R14: ffff8881e7b84728 R15: 1ffff1103e167f7b
[ 691.490019] FS: 00007f4b25ea2e80(0000) GS:ffff8881f5500000(0000) knlGS:0000000000000000
[ 691.490021] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 691.490022] CR2: 00007fffbb2d4eec CR3: 00000001f2a4a004 CR4: 00000000003606e0
[ 691.490025] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 691.490027] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 691.490029] Call Trace:
[ 691.490058] btrfs_log_inode_parent+0x667/0x2730 [btrfs]
[ 691.490083] ? join_transaction+0x24a/0xce0 [btrfs]
[ 691.490107] ? btrfs_end_log_trans+0x80/0x80 [btrfs]
[ 691.490111] ? dget_parent+0xb8/0x460
[ 691.490116] ? lock_downgrade+0x6b0/0x6b0
[ 691.490121] ? rwlock_bug.part.0+0x90/0x90
[ 691.490127] ? do_raw_spin_unlock+0x142/0x220
[ 691.490151] btrfs_log_dentry_safe+0x65/0x90 [btrfs]
[ 691.490172] btrfs_sync_file+0x9f1/0xc00 [btrfs]
[ 691.490195] ? btrfs_file_write_iter+0x1800/0x1800 [btrfs]
[ 691.490198] ? rcu_read_lock_any_held.part.11+0x20/0x20
[ 691.490204] ? __do_sys_newstat+0x88/0xd0
[ 691.490207] ? cp_new_stat+0x5d0/0x5d0
[ 691.490218] ? do_fsync+0x38/0x60
[ 691.490220] do_fsync+0x38/0x60
[ 691.490224] __x64_sys_fdatasync+0x32/0x40
[ 691.490228] do_syscall_64+0x9f/0x540
[ 691.490233] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 691.490235] RIP: 0033:0x7f4b253ad5f0
(...)
[ 691.490239] RSP: 002b:00007fffbb2d6078 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 691.490242] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f4b253ad5f0
[ 691.490244] RDX: 00007fffbb2d5fe0 RSI: 00007fffbb2d5fe0 RDI: 0000000000000003
[ 691.490245] RBP: 000000000000000d R08: 0000000000000001 R09: 00007fffbb2d608c
[ 691.490247] R10: 00000000000002e8 R11: 0000000000000246 R12: 00000000000001f4
[ 691.490248] R13: 0000000051eb851f R14: 00007fffbb2d6120 R15: 00005635a498bda0
This started happening recently when running some test cases from fstests
like btrfs/004 for example, because support for rename exchange was added
last week to fsstress from fstests.
So fix this by deleting the log context for the source root from the list
if we have logged the new name in the source root.
Reported-by: Su Yue <Damenly_Su@gmx.com>
Fixes: d4682ba03e ("Btrfs: sync log after logging new name")
CC: stable@vger.kernel.org # 4.19+
Tested-by: Su Yue <Damenly_Su@gmx.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
On Sat, Nov 02, 2019 at 06:08:42PM +0000, Al Viro wrote:
> It is converging to a reasonably small and understandable surface, actually,
> most of that being in core pathname resolution. Two big piles of nightmares
> left to review - overlayfs and (somewhat surprisingly) setxattr call chains,
> the latter due to IMA/EVM/LSM insanity...
Oh, lovely - in exportfs_decode_fh() we have this:
err = exportfs_get_name(mnt, target_dir, nbuf, result);
if (!err) {
inode_lock(target_dir->d_inode);
nresult = lookup_one_len(nbuf, target_dir,
strlen(nbuf));
inode_unlock(target_dir->d_inode);
if (!IS_ERR(nresult)) {
if (nresult->d_inode) {
dput(result);
result = nresult;
} else
dput(nresult);
}
}
We have derived the parent from fhandle, we have a disconnected dentry for child,
we go look for the name. We even find it. Now, we want to look it up. And
some bastard goes and unlinks it, just as we are trying to lock the parent.
We do a lookup, and get a negative dentry. Then we unlock the parent... and
some other bastard does e.g. mkdir with the same name. OK, nresult->d_inode
is not NULL (anymore). It has fuck-all to do with the original fhandle
(different inumber, etc.) but we happily accept it.
Even better, we have no barriers between our check and nresult becoming positive.
IOW, having observed non-NULL ->d_inode doesn't give us enough - e.g. we might
still see the old ->d_flags value, from back when ->d_inode used to be NULL.
On something like alpha we also have no promises that we'll observe anything
about the fields of nresult->d_inode, but ->d_flags alone is enough for fun.
The callers can't e.g. expect d_is_reg() et.al. to match the reality.
This is obviously bogus. And the fix is obvious: check that nresult->d_inode is
equal to result->d_inode before unlocking the parent. Note that we'd *already* had
the original result and all of its aliases rejected by the 'acceptable' predicate,
so if nresult doesn't supply us a better alias, we are SOL.
Does anyone see objections to the following patch? Christoph, that seems to
be your code; am I missing something subtle here? AFAICS, that goes back to
2007 or so...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Quota statistics counted as 64-bit per-cpu counter. Reading sums per-cpu
fractions as signed 64-bit int, filters negative values and then reports
lower half as signed 32-bit int.
Result may looks like:
fs.quota.allocated_dquots = 22327
fs.quota.cache_hits = -489852115
fs.quota.drops = -487288718
fs.quota.free_dquots = 22083
fs.quota.lookups = -486883485
fs.quota.reads = 22327
fs.quota.syncs = 335064
fs.quota.writes = 3088689
Values bigger than 2^31-1 reported as negative.
All counters except "allocated_dquots" and "free_dquots" are monotonic,
thus they should be reported as is without filtering negative values.
Kernel doesn't have generic helper for 64-bit sysctl yet,
let's use at least unsigned long.
Link: https://lore.kernel.org/r/157337934693.2078.9842146413181153727.stgit@buzz
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Jan Kara <jack@suse.cz>
If we cancel a pending accept operating with a signal, we get
-ERESTARTSYS returned. Turn that into -EINTR for userspace, we should
not be return -ERESTARTSYS.
Fixes: 17f2fe35d0 ("io_uring: add support for IORING_OP_ACCEPT")
Reported-by: Hrvoje Zeba <zeba.hrvoje@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Similar to the distinction between io_put_req and io_put_req_find_next,
io_free_req has been modified similarly, with no functional changes.
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>