Commit Graph

27 Commits

Author SHA1 Message Date
Josef Bacik fc97a410bd btrfs: move mount option definitions to fs.h
These are fs wide definitions and helpers, move them out of ctree.h and
into fs.h.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-12-05 18:00:42 +01:00
Josef Bacik 765c3fe99b btrfs: introduce BTRFS_RESERVE_FLUSH_EMERGENCY
Inside of FB, as well as some user reports, we've had a consistent
problem of occasional ENOSPC transaction aborts.  Inside FB we were
seeing ~100-200 ENOSPC aborts per day in the fleet, which is a really
low occurrence rate given the size of our fleet, but it's not nothing.

There are two causes of this particular problem.

First is delayed allocation.  The reservation system for delalloc
assumes that contiguous dirty ranges will result in 1 file extent item.
However if there is memory pressure that results in fragmented writeout,
or there is fragmentation in the block groups, this won't necessarily be
true.  Consider the case where we do a single 256MiB write to a file and
then close it.  We will have 1 reservation for the inode update, the
reservations for the checksum updates, and 1 reservation for the file
extent item.  At some point later we decide to write this entire range
out, but we're so fragmented that we break this into 100 different file
extents.  Since we've already closed the file and are no longer writing
to it there's nothing to trigger a refill of the delalloc block rsv to
satisfy the 99 new file extent reservations we need.  At this point we
exhaust our delalloc reservation, and we begin to steal from the global
reserve.  If you have enough of these cases going in parallel you can
easily exhaust the global reserve, get an ENOSPC at
btrfs_alloc_tree_block() time, and then abort the transaction.

The other case is the delayed refs reserve.  The delayed refs reserve
updates its size based on outstanding delayed refs and dirty block
groups.  However we only refill this block reserve when returning
excess reservations and when we call btrfs_start_transaction(root, X).
We will reserve 2*X credits at transaction start time, and fill in X
into the delayed refs reserve to make sure it stays topped off.
Generally this works well, but clearly has downsides.  If we do a
particularly delayed ref heavy operation we may never catch up in our
reservations.  Additionally running delayed refs generates more delayed
refs, and at that point we may be committing the transaction and have no
way to trigger a refill of our delayed refs rsv.  Then a similar thing
occurs with the delalloc reserve.

Generally speaking we well over-reserve in all of our block rsvs.  If we
reserve 1 credit we're usually reserving around 264k of space, but we'll
often not use any of that reservation, or use a few blocks of that
reservation.  We can be reasonably sure that as long as you were able to
reserve space up front for your operation you'll be able to find space
on disk for that reservation.

So introduce a new flushing state, BTRFS_RESERVE_FLUSH_EMERGENCY.  This
gets used in the case that we've exhausted our reserve and the global
reserve.  It simply forces a reservation if we have enough actual space
on disk to make the reservation, which is almost always the case.  This
keeps us from hitting ENOSPC aborts in these odd occurrences where we've
not kept up with the delayed work.

Fixing this in a complete way is going to be relatively complicated and
time consuming.  This patch is what I discussed with Filipe earlier this
year, and what I put into our kernels inside FB.  With this patch we're
down to 1-2 ENOSPC aborts per week, which is a significant reduction.
This is a decent stop gap until we can work out a more wholistic
solution to these two corner cases.

Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-12-05 18:00:38 +01:00
David Sterba 748f553c3c btrfs: add KCSAN annotations for unlocked access to block_rsv->full
KCSAN reports that there's unlocked access mixed with locked access,
which is technically correct but is not a bug.  To avoid false alerts at
least from KCSAN, add annotation and use a wrapper whenever ->full is
accessed for read outside of lock.

It is used as a fast check and only advisory.  In the worst case the
block reserve is found !full and becomes full in the meantime, but
properly handled.

Depending on the value of ->full, btrfs_block_rsv_release decides
where to return the reservation, and block_rsv_release_bytes handles a
NULL pointer for block_rsv and if it's not NULL then it double checks
the full status under a lock.

Link: https://lore.kernel.org/linux-btrfs/CAAwBoOJDjei5Hnem155N_cJwiEkVwJYvgN-tQrwWbZQGhFU=cA@mail.gmail.com/
Link: https://lore.kernel.org/linux-btrfs/YvHU/vsXd7uz5V6j@hungrycats.org
Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26 12:28:02 +02:00
Qu Wenruo 14033b08a0 btrfs: don't save block group root into super block
The extent tree v2 needs a new root for storing all block group items,
the whole feature hasn't been finished yet so we can afford to do some
changes.

My initial proposal years ago just added a new tree rootid, and load it
from tree root, just like what we did for quota/free space tree/uuid/extent
roots.

But the extent tree v2 patches introduced a completely new way to store
block group tree root into super block which is arguably wasteful.

Currently there are only 3 trees stored in super blocks, and they all
have their valid reasons:

- Chunk root
  Needed for bootstrap.

- Tree root
  Really the entry point for all trees.

- Log root
  This is special as log root has to be updated out of existing
  transaction mechanism.

There is not even any reason to put block group root into super blocks,
the block group tree is updated at the same time as the old extent tree,
no need for extra bootstrap/out-of-transaction update.

So just move block group root from super block into tree root.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26 12:28:00 +02:00
David Sterba 8bfc9b2cf4 btrfs: use enum for btrfs_block_rsv::type
The number of block group reserve types BTRFS_BLOCK_RSV_* is small and
fits to u8 and there's enough left in case we want to add more.
For type safety use the enum but make it 8 bits in the structure to save
space.

The structure size is now 48 on release build, making a slight
improvement in structures where it's embedded, like btrfs_fs_info or
btrfs_inode.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-07-25 17:45:40 +02:00
David Sterba c70c2c5bc9 btrfs: switch btrfs_block_rsv::full to bool
Use simple bool type for the block reserve full status, there's short to
save space as there used to be int but there's no reason for that.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-07-25 17:45:40 +02:00
Josef Bacik c18e323564 btrfs: reserve extra space for the free space tree
Filipe reported a problem where sometimes he'd get an ENOSPC abort when
running delayed refs with generic/619 and the free space tree enabled.
This is partly because we do not reserve space for modifying the free
space tree, nor do we have a block rsv associated with that tree.

The delayed_refs_rsv tracks the amount of space required to run delayed
refs.  This means 1 modification means 1 change to the extent root.
With the free space tree this turns into 2 changes, because modifying 1
extent means updating the extent tree and potentially updating the free
space tree to either remove that entry or add the free space.  Thus if
we have the FST enabled, simply double the reservation size for our
modification.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-01-07 14:18:25 +01:00
Josef Bacik 9506f95382 btrfs: include the free space tree in the global rsv minimum calculation
Filipe reported a problem where generic/619 was failing with an ENOSPC
abort while running delayed refs, like the following

  BTRFS: Transaction aborted (error -28)
  WARNING: CPU: 3 PID: 522920 at fs/btrfs/free-space-tree.c:1049 add_to_free_space_tree+0xe5/0x110 [btrfs]
  CPU: 3 PID: 522920 Comm: kworker/u16:19 Tainted: G        W         5.16.0-rc2-btrfs-next-106 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
  Workqueue: events_unbound btrfs_async_reclaim_metadata_space [btrfs]
  RIP: 0010:add_to_free_space_tree+0xe5/0x110 [btrfs]
  RSP: 0000:ffffa65087fb7b20 EFLAGS: 00010282
  RAX: 0000000000000000 RBX: 0000000000001000 RCX: 0000000000000000
  RDX: 0000000000000001 RSI: ffffffff9131eeaa RDI: 00000000ffffffff
  RBP: ffff8d62e26481b8 R08: ffffffff9ad97ce0 R09: 0000000000000001
  R10: 0000000000000000 R11: 0000000000000001 R12: 00000000ffffffe4
  R13: ffff8d61c25fe688 R14: ffff8d61ebd88800 R15: ffff8d61ebd88a90
  FS:  0000000000000000(0000) GS:ffff8d64ed400000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007fa46a8b1000 CR3: 0000000148d18003 CR4: 0000000000370ee0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   <TASK>
   __btrfs_free_extent+0x516/0x950 [btrfs]
   __btrfs_run_delayed_refs+0x2b1/0x1250 [btrfs]
   btrfs_run_delayed_refs+0x86/0x210 [btrfs]
   flush_space+0x403/0x630 [btrfs]
   ? call_rcu_tasks_generic+0x50/0x80
   ? lock_release+0x223/0x4a0
   ? btrfs_get_alloc_profile+0xb5/0x290 [btrfs]
   ? do_raw_spin_unlock+0x4b/0xa0
   btrfs_async_reclaim_metadata_space+0x139/0x320 [btrfs]
   process_one_work+0x24c/0x5b0
   worker_thread+0x55/0x3c0
   ? process_one_work+0x5b0/0x5b0
   kthread+0x17c/0x1a0
   ? set_kthread_struct+0x40/0x40
   ret_from_fork+0x22/0x30

There's a couple of reasons for this, but in generic/619's case the
largest reason is because it is a very small file system, ad we do not
reserve enough space for the global reserve.

With the free space tree we now have the free space tree that we need to
modify when running delayed refs.  This means we need the global reserve
to take this into account when it calculates the minimum size it needs
to be.  This is especially important for very small file systems.

Fix this by adjusting the minimum global block rsv size math to include
the size of the free space tree when calculating the size.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-01-07 14:18:25 +01:00
Josef Bacik fc28b25e1f btrfs: stop accessing ->csum_root directly
We are going to have multiple csum roots in the future, so convert all
users of ->csum_root to btrfs_csum_root() and rename ->csum_root to
->_csum_root so we can easily find remaining users in the future.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-01-03 15:09:49 +01:00
Josef Bacik 29cbcf4017 btrfs: stop accessing ->extent_root directly
When we start having multiple extent roots we'll need to use a helper to
get to the correct extent_root.  Rename fs_info->extent_root to
_extent_root and convert all of the users of the extent root to using
the btrfs_extent_root() helper.  This will allow us to easily clean up
the remaining direct accesses in the future.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-01-03 15:09:49 +01:00
Josef Bacik 2e608bd1dd btrfs: init root block_rsv at init root time
In the future we're going to have multiple csum and extent root trees,
so init the roots block_rsv at setup_root time based on their root key
objectid.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-01-03 15:09:48 +01:00
Josef Bacik 9270501c16 btrfs: change root to fs_info for btrfs_reserve_metadata_bytes
We used to need the root for btrfs_reserve_metadata_bytes to check the
orphan cleanup state, but we no longer need that, we simply need the
fs_info.  Change btrfs_reserve_metadata_bytes() to use the fs_info, and
change both btrfs_block_rsv_refill() and btrfs_block_rsv_add() to do the
same as they simply call btrfs_reserve_metadata_bytes() and then
manipulate the block_rsv that is being used.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-01-03 15:09:45 +01:00
Josef Bacik 42437a6386 btrfs: introduce mount option rescue=ignorebadroots
In the face of extent root corruption, or any other core fs wide root
corruption we will fail to mount the file system.  This makes recovery
kind of a pain, because you need to fall back to userspace tools to
scrape off data.  Instead provide a mechanism to gracefully handle bad
roots, so we can at least mount read-only and possibly recover data from
the file system.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-12-08 15:53:41 +01:00
Josef Bacik e38fdb7167 btrfs: print the block rsv type when we fail our reservation
To help with debugging, print the type of the block rsv when we fail to
use our target block rsv in btrfs_use_block_rsv.

This now produces:

 [  544.672035] BTRFS: block rsv 1 returned -28

which is still cryptic without consulting the enum in block-rsv.h but I
guess it's better than nothing.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add note from Nikolay ]
Signed-off-by: David Sterba <dsterba@suse.com>
2020-11-05 13:02:05 +01:00
Qu Wenruo 92a7cc4252 btrfs: rename BTRFS_ROOT_REF_COWS to BTRFS_ROOT_SHAREABLE
The name BTRFS_ROOT_REF_COWS is not very clear about the meaning.

In fact, that bit can only be set to those trees:

- Subvolume roots
- Data reloc root
- Reloc roots for above roots

All other trees won't get this bit set.  So just by the result, it is
obvious that, roots with this bit set can have tree blocks shared with
other trees.  Either shared by snapshots, or by reloc roots (an special
snapshot created by relocation).

This patch will rename BTRFS_ROOT_REF_COWS to BTRFS_ROOT_SHAREABLE to
make it easier to understand, and update all comment mentioning
"reference counted" to follow the rename.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-05-25 11:25:35 +02:00
Josef Bacik 9c343784c4 btrfs: force chunk allocation if our global rsv is larger than metadata
Nikolay noticed a bunch of test failures with my global rsv steal
patches.  At first he thought they were introduced by them, but they've
been failing for a while with 64k nodes.

The problem is with 64k nodes we have a global reserve that calculates
out to 13MiB on a freshly made file system, which only has 8MiB of
metadata space.  Because of changes I previously made we no longer
account for the global reserve in the overcommit logic, which means we
correctly allow overcommit to happen even though we are already
overcommitted.

However in some corner cases, for example btrfs/170, we will allocate
the entire file system up with data chunks before we have enough space
pressure to allocate a metadata chunk.  Then once the fs is full we
ENOSPC out because we cannot overcommit and the global reserve is taking
up all of the available space.

The most ideal way to deal with this is to change our space reservation
stuff to take into account the height of the tree's that we're
modifying, so that our global reserve calculation does not end up so
obscenely large.

However that is a huge undertaking.  Instead fix this by forcing a chunk
allocation if the global reserve is larger than the total metadata
space.  This gives us essentially the same behavior that happened
before, we get a chunk allocated and these tests can pass.

This is meant to be a stop-gap measure until we can tackle the "tree
height only" project.

Fixes: 0096420adb ("btrfs: do not account global reserve in can_overcommit")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Tested-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-05-25 11:25:23 +02:00
Nikolay Borisov 63f018be57 btrfs: Remove __ prefix from btrfs_block_rsv_release
Currently the non-prefixed version is a simple wrapper used to hide
the 4th argument of the prefixed version. This doesn't bring much value
in practice and only makes the code harder to follow by adding another
level of indirection. Rectify this by removing the __ prefix and
have only one public function to release bytes from a block reservation.
No semantic changes.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23 17:01:55 +01:00
Anand Jain b82582d668 btrfs: slightly simplify global block reserve calculations
In btrfs_update_global_block_rsv the lines:

  num_bytes = block_rsv->size - block_rsv->reserved;
  block_rsv->reserved += num_bytes;

imply:

  block_rsv->reserved = block_rsv->size;

Assign block_rsv->size to block_rsv->reserved directly and reorder lines
so they match the other branch.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23 17:01:46 +01:00
Josef Bacik 734d8c15df btrfs: add a comment describing block reserves
This is a giant comment at the top of block-rsv.c describing generally
how block reserves work.  It is purely about the block reserves
themselves, and nothing to do with how the actual reservation system
works.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-03-23 17:01:26 +01:00
Josef Bacik 426551f686 btrfs: use btrfs_try_granting_tickets in update_global_rsv
We have some annoying xfstests tests that will create a very small fs,
fill it up, delete it, and repeat to make sure everything works right.
This trips btrfs up sometimes because we may commit a transaction to
free space, but most of the free metadata space was being reserved by
the global reserve.  So we commit and update the global reserve, but the
space is simply added to bytes_may_use directly, instead of trying to
add it to existing tickets.  This results in ENOSPC when we really did
have space.  Fix this by calling btrfs_try_granting_tickets once we add
back our excess space to wake any pending tickets.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-09-09 14:59:19 +02:00
Josef Bacik d792b0f197 btrfs: always reserve our entire size for the global reserve
While messing with the overcommit logic I noticed that sometimes we'd
ENOSPC out when really we should have run out of space much earlier.  It
turns out it's because we'll only reserve up to the free amount left in
the space info for the global reserve, but that doesn't make sense with
overcommit because we could be well above our actual size.  This results
in the global reserve not carving out it's entire reservation, and thus
not putting enough pressure on the rest of the infrastructure to do the
right thing and ENOSPC out at a convenient time.  Fix this by always
taking our full reservation amount for the global reserve.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-09-09 14:59:19 +02:00
Josef Bacik 3593ce30b5 btrfs: change the minimum global reserve size
It made sense to have the global reserve set at 16M in the past, but
since it is used less nowadays set the minimum size to the number of
items we'll need to update the main trees we update during a transaction
commit, plus some slop area so we can do unlinks if we need to.

In practice this doesn't affect normal file systems, but for xfstests
where we do things like fill up a fs and then rm * it can fall over in
weird ways.  This enables us for more sane behavior at extremely small
file system sizes.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-09-09 14:59:18 +02:00
Josef Bacik d05e46497f btrfs: rename btrfs_space_info_add_old_bytes
This name doesn't really fit with how the space reservation stuff works
now, rename it to btrfs_space_info_free_bytes_may_use so it's clear what
the function is doing.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-09-09 14:59:18 +02:00
Josef Bacik f3e75e3805 btrfs: roll tracepoint into btrfs_space_info_update helper
We duplicate this tracepoint everywhere we call these helpers, so update
the helper to have the tracepoint as well.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-09-09 14:59:17 +02:00
David Sterba 784352fe0b btrfs: move math functions to misc.h
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-09-09 14:59:15 +02:00
Josef Bacik 67f9c2209e btrfs: migrate the global_block_rsv helpers to block-rsv.c
These helpers belong in block-rsv.c

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-02 12:30:55 +02:00
Josef Bacik 550fa228ee btrfs: migrate the block-rsv code to block-rsv.c
This moves everything out of extent-tree.c to block-rsv.c.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-02 12:30:54 +02:00