Luo Jie says:
====================
net: mdio: Add IPQ MDIO reset related function
This patch series add the MDIO reset features, which includes
configuring MDIO clock source frequency and indicating CMN_PLL that
ethernet LDO has been ready, this ethernet LDO is dedicated in the
IPQ5018 platform.
Specify more chipset IPQ40xx, IPQ807x, IPQ60xx and IPQ50xx supported by
this MDIO driver.
Changes in v3:
* simplify the function ipq_mdio_reset.
Changes in v2:
* Addressed review comments (Andrew Lunn).
* Remove the IS_ERR().
* make binding patch part of series.
* document the property 'reg' and 'clock'.
Changes in v1:
* make MDIO_IPQ4019 unchanged for backwards compatibility.
* remove the PHY reset functions
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The new added properties resource "reg" is for configuring
ethernet LDO in the IPQ5018 chipset, the property "clocks"
is for configuring the MDIO clock source frequency.
Signed-off-by: Luo Jie <luoj@codeaurora.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The IPQ MDIO driver currently supports the chipset IPQ40xx, IPQ807x,
IPQ60xx and IPQ50xx.
Add the compatible 'qcom,ipq5018-mdio' because of ethernet LDO dedicated
to the IPQ5018 platform.
Signed-off-by: Luo Jie <luoj@codeaurora.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
1. configure the MDIO clock source frequency.
2. the LDO resource is needed to configure the ethernet LDO available
for CMN_PLL.
Signed-off-by: Luo Jie <luoj@codeaurora.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix crashes coming out of nap on 32-bit Book3s (eg. powerbooks).
- Fix critical and debug interrupts on BookE, seen as crashes when using ptrace.
- Fix an oops when running an SMP kernel on a UP system.
- Update pseries LPAR security flavor after partition migration.
- Fix an oops when using kprobes on BookE.
- Fix oops on 32-bit pmac by not calling do_IRQ() from timer_interrupt().
- Fix softlockups on CPU hotplug into a CPU-less node with xive (P9).
Thanks to: Cédric Le Goater, Christophe Leroy, Finn Thain, Geetika Moolchandani, Laurent
Dufour, Laurent Vivier, Nicholas Piggin, Pu Lehui, Radu Rendec, Srikar Dronamraju, Stan
Johnson.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmEY/6QTHG1wZUBlbGxl
cm1hbi5pZC5hdQAKCRBR6+o8yOGlgHNBD/9zsObrReMj+lKbgEBw5u8kbERqWjQ4
otJuxkT3mrQTA2YsJZ4QpUE7C+78h7P7aS3LpfpeONkI+WSxbuq/j+47538mpiLu
LmasKZVVdLP3b+3eww2pOEYKF1qACkBxsy6gBy0DAzoWAjczVQkdpoe1pXyIQjz2
j3UyuuFvyE76eKHn7aSfOHO1PiNfO0ZXghum9gc5kXsOsqg9eaFbbJ4HUD2FHd6V
UmIl+njlt03TS6TBXkZwpcplfZWhcks7ZY/VqylrWSlbUx75J2aJ2hb0G1iU3l9S
51AepEOQmZnkhOGA19PJhVudtUBc8pw5RCwYPeqv71tgo8hayCVgjBy+kmHqAvFI
u0iFqA1dZjCPaFlm9Pcgq/DZdzD2xFLilpY/e4qwyDrQ1TsXM4CdJpEkaSsZ2IZ/
HQbvjx1D4U7qZTPCMGSG4IQNtxtSVrZO8CzKoRUTDVDLPdjW/259abLQQTpY7x8z
N5M5KeCk6xNk1ZYzxpzRKk+qSwiueIrqyP5GMMfzOCtJwBe7Q+vWtN1RbNQ2pBVO
TUzQ0b7WYqiweNUFahXzgeUBUXP6HixG3Ay7z8bnUaWgWSgD8agbyx0gX1Jtj/cJ
GAnKOH+GygnqIsijonohXpS+TPOHTR7hAP2w3G7ONJhXiaBKFHp4PKJwSO5tuiR3
NZqm9NYZEsf6CQ==
=GOBK
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix crashes coming out of nap on 32-bit Book3s (eg. powerbooks).
- Fix critical and debug interrupts on BookE, seen as crashes when
using ptrace.
- Fix an oops when running an SMP kernel on a UP system.
- Update pseries LPAR security flavor after partition migration.
- Fix an oops when using kprobes on BookE.
- Fix oops on 32-bit pmac by not calling do_IRQ() from
timer_interrupt().
- Fix softlockups on CPU hotplug into a CPU-less node with xive (P9).
Thanks to Cédric Le Goater, Christophe Leroy, Finn Thain, Geetika
Moolchandani, Laurent Dufour, Laurent Vivier, Nicholas Piggin, Pu Lehui,
Radu Rendec, Srikar Dronamraju, and Stan Johnson.
* tag 'powerpc-5.14-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/xive: Do not skip CPU-less nodes when creating the IPIs
powerpc/interrupt: Do not call single_step_exception() from other exceptions
powerpc/interrupt: Fix OOPS by not calling do_IRQ() from timer_interrupt()
powerpc/kprobes: Fix kprobe Oops happens in booke
powerpc/pseries: Fix update of LPAR security flavor after LPM
powerpc/smp: Fix OOPS in topology_init()
powerpc/32: Fix critical and debug interrupts on BOOKE
powerpc/32s: Fix napping restore in data storage interrupt (DSI)
- Mask all MSI-X entries when enabling MSI-X otherwise stale unmasked
entries stay around e.g. when a crashkernel is booted.
- Enforce masking of a MSI-X table entry when updating it, which mandatory
according to speification
- Ensure that writes to MSI[-X} tables are flushed.
- Prevent invalid bits being set in the MSI mask register
- Properly serialize modifications to the mask cache and the mask register
for multi-MSI.
- Cure the violation of the affinity setting rules on X86 during interrupt
startup which can cause lost and stale interrupts. Move the initial
affinity setting ahead of actualy enabling the interrupt.
- Ensure that MSI interrupts are completely torn down before freeing them
in the error handling case.
- Prevent an array out of bounds access in the irq timings code.
-----BEGIN PGP SIGNATURE-----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=yf3u
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2021-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of fixes for PCI/MSI and x86 interrupt startup:
- Mask all MSI-X entries when enabling MSI-X otherwise stale unmasked
entries stay around e.g. when a crashkernel is booted.
- Enforce masking of a MSI-X table entry when updating it, which
mandatory according to speification
- Ensure that writes to MSI[-X} tables are flushed.
- Prevent invalid bits being set in the MSI mask register
- Properly serialize modifications to the mask cache and the mask
register for multi-MSI.
- Cure the violation of the affinity setting rules on X86 during
interrupt startup which can cause lost and stale interrupts. Move
the initial affinity setting ahead of actualy enabling the
interrupt.
- Ensure that MSI interrupts are completely torn down before freeing
them in the error handling case.
- Prevent an array out of bounds access in the irq timings code"
* tag 'irq-urgent-2021-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
driver core: Add missing kernel doc for device::msi_lock
genirq/msi: Ensure deactivation on teardown
genirq/timings: Prevent potential array overflow in __irq_timings_store()
x86/msi: Force affinity setup before startup
x86/ioapic: Force affinity setup before startup
genirq: Provide IRQCHIP_AFFINITY_PRE_STARTUP
PCI/MSI: Protect msi_desc::masked for multi-MSI
PCI/MSI: Use msi_mask_irq() in pci_msi_shutdown()
PCI/MSI: Correct misleading comments
PCI/MSI: Do not set invalid bits in MSI mask
PCI/MSI: Enforce MSI[X] entry updates to be visible
PCI/MSI: Enforce that MSI-X table entry is masked for update
PCI/MSI: Mask all unused MSI-X entries
PCI/MSI: Enable and mask MSI-X early
A batch of fixes for the arm64 stub image loader:
- fix a logic bug that can make the random page allocator fail
spuriously
- force reallocation of the Image when it overlaps with firmware
reserved memory regions
- fix an oversight that defeated on optimization introduced earlier
where images loaded at a suitable offset are never moved if booting
without randomization
- complain about images that were not loaded at the right offset by the
firmware image loader.
-----BEGIN PGP SIGNATURE-----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=oMzy
-----END PGP SIGNATURE-----
Merge tag 'efi_urgent_for_v5.14_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Borislav Petkov:
"A batch of fixes for the arm64 stub image loader:
- fix a logic bug that can make the random page allocator fail
spuriously
- force reallocation of the Image when it overlaps with firmware
reserved memory regions
- fix an oversight that defeated on optimization introduced earlier
where images loaded at a suitable offset are never moved if booting
without randomization
- complain about images that were not loaded at the right offset by
the firmware image loader"
* tag 'efi_urgent_for_v5.14_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/libstub: arm64: Double check image alignment at entry
efi/libstub: arm64: Warn when efi_random_alloc() fails
efi/libstub: arm64: Relax 2M alignment again for relocatable kernels
efi/libstub: arm64: Force Image reallocation if BSS was not reserved
arm64: efi: kaslr: Fix occasional random alloc (and boot) failure
version
- Fix resctrl default monitoring groups reporting when new subgroups get
created
-----BEGIN PGP SIGNATURE-----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=Gg+d
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.14_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"Two fixes:
- An objdump checker fix to ignore parenthesized strings in the
objdump version
- Fix resctrl default monitoring groups reporting when new subgroups
get created"
* tag 'x86_urgent_for_v5.14_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Fix default monitoring groups reporting
x86/tools: Fix objdump version check again
- Plug race between enabling MTE and creating vcpus
- Fix off-by-one bug when checking whether an address range is RAM
x86:
- Fixes for the new MMU, especially a memory leak on hosts with <39
physical address bits
- Remove bogus EFER.NX checks on 32-bit non-PAE hosts
- WAITPKG fix
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmEWjBwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPrMgf9EDBsRvD/Kids0kddaoAgM6qICdsH
tQX/GdsmecUlU16Bkp21XeZif1ZKcJxCmx/dhYmid3woi9HuX5AreFTlLjlJDRxg
+lJvboqTV0kk7PjaYkOaqd42RSg/BiSLZ+JVPpbW7CqeIr1lGG4yhIC/Nl7fCCto
sCaY/NoxtraoG5+WZcRRP7XptQmMRckVZ9bimHHh8dKqMkosGx1hcGfj64aKmx4F
2EVrrjr+an3mpMnwvUIgNw4xEj/jUCFebvGAROVEsrZzNTZ9UrwgT0HeA92XwQVQ
93z7nqcBUKHH11rnbOvRESEJD9f6I9vCSaiqRROwmoqLY/Xi7jly7XeDcA==
=Lj8B
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"ARM:
- Plug race between enabling MTE and creating vcpus
- Fix off-by-one bug when checking whether an address range is RAM
x86:
- Fixes for the new MMU, especially a memory leak on hosts with <39
physical address bits
- Remove bogus EFER.NX checks on 32-bit non-PAE hosts
- WAITPKG fix"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/mmu: Protect marking SPs unsync when using TDP MMU with spinlock
KVM: x86/mmu: Don't step down in the TDP iterator when zapping all SPTEs
KVM: x86/mmu: Don't leak non-leaf SPTEs when zapping all SPTEs
KVM: nVMX: Use vmx_need_pf_intercept() when deciding if L0 wants a #PF
kvm: vmx: Sync all matching EPTPs when injecting nested EPT fault
KVM: x86: remove dead initialization
KVM: x86: Allow guest to set EFER.NX=1 on non-PAE 32-bit kernels
KVM: VMX: Use current VMCS to query WAITPKG support for MSR emulation
KVM: arm64: Fix race when enabling KVM_ARM_CAP_MTE
KVM: arm64: Fix off-by-one in range_is_memory
The 2021-model XPS 15 appears to use the same 4-speakers-on-ALC289 audio
setup as the Precision models, so requires the same quirk to enable woofer
output. Tested on my own 9510.
Signed-off-by: Kristin Paget <kristin@tombom.co.uk>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/e1fc95c5-c10a-1f98-a5c2-dd6e336157e1@tombom.co.uk
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Three minor fixes, all in drivers.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYRiF2yYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishS1EAQDZL/WM
TCYRGUQ7tAB/CgoShLDDZqRzmi74EUa7Nnc5XgEA/dA10eWDG8d3U8gSbL86+Jcw
1cRaCemzI2CJm42ixNQ=
=4eSU
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three minor fixes, all in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mpt3sas: Fix incorrectly assigned error return and check
scsi: storvsc: Log TEST_UNIT_READY errors as warnings
scsi: lpfc: Move initialization of phba->poll_list earlier to avoid crash
- Fix support for NFIT "virtual" ranges (BIOS-defined memory disks)
- Fix recovery from failed label storage areas on NVDIMM devices
- Miscellaneous cleanups from Ira's investigation of dax_direct_access
paths preparing for stray-write protection.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYRhC0wAKCRDfioYZHlFs
Z6InAQD+duS9GS5DnnFInmRDj/rMRQFVB4X25mmSlViYOR0gNwEAtJQP03CGAp+G
+DP7/nu2HrIhx8Ng8vTsu8ZnO8ge7Qw=
=zmii
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-fixes-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A couple of fixes for long standing bugs, a warning fixup, and some
miscellaneous dax cleanups.
The bugs were recently found due to new platforms looking to use the
ACPI NFIT "virtual" device definition, and new error injection
capabilities to trigger error responses to label area requests. Ira's
cleanups have been long pending, I neglected to send them earlier, and
see no harm in including them now. This has all appeared in -next with
no reported issues.
Summary:
- Fix support for NFIT "virtual" ranges (BIOS-defined memory disks)
- Fix recovery from failed label storage areas on NVDIMM devices
- Miscellaneous cleanups from Ira's investigation of
dax_direct_access paths preparing for stray-write protection"
* tag 'libnvdimm-fixes-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
tools/testing/nvdimm: Fix missing 'fallthrough' warning
libnvdimm/region: Fix label activation vs errors
ACPI: NFIT: Fix support for virtual SPA ranges
dax: Ensure errno is returned from dax_direct_access
fs/dax: Clarify nr_pages to dax_direct_access()
fs/fuse: Remove unneeded kaddr parameter
Here is a single revert of a commit that caused problems in 5.14-rc5 for
5.14-rc6. It has been in linux-next almost all week, and has resolved
the issues that were reported on lots of different systems that were not
the platform that the change was originally tested on (gotta love SoC
cores used in multiple devices from multiple vendors...)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYRf0Qg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynEBgCgg/t8I7hGF5+bi6qV82K/atVFgvkAnRLN9c43
nUXoVeo1RBk3tI+G31Cl
=vpaV
-----END PGP SIGNATURE-----
Merge tag 'usb-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fix from Greg KH:
"A single revert of a commit that caused problems in 5.14-rc5 for
5.14-rc6. It has been in linux-next almost all week, and has resolved
the issues that were reported on lots of different systems that were
not the platform that the change was originally tested on (gotta love
SoC cores used in multiple devices from multiple vendors...)"
* tag 'usb-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
Revert "usb: dwc3: gadget: Use list_replace_init() before traversing lists"
Here are some small IIO driver fixes for reported problems for 5.14-rc6
(no staging driver fixes at the moment).
All of them resolve reported issues and have been in linux-next all week
with no reported problems. Full details are in the shortlog.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYRfzsg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn4qACdG4OZ4cn8C2QtsxXMtxknUcBeKMYAoIv2x+bB
gl/bJVn9vtyVqSESnefM
=OOPX
-----END PGP SIGNATURE-----
Merge tag 'staging-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull IIO driver fixes from Greg KH:
"Here are some small IIO driver fixes for reported problems for
5.14-rc6 (no staging driver fixes at the moment).
All of them resolve reported issues and have been in linux-next all
week with no reported problems. Full details are in the shortlog"
* tag 'staging-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: adc: Fix incorrect exit of for-loop
iio: humidity: hdc100x: Add margin to the conversion time
dt-bindings: iio: st: Remove wrong items length check
iio: accel: fxls8962af: fix i2c dependency
iio: adis: set GPIO reset pin direction
iio: adc: ti-ads7950: Ensure CS is deasserted after reading channels
iio: accel: fxls8962af: fix potential use of uninitialized symbol
Pull i2c fixes from Wolfram Sang:
"One driver bugfix, a documentation bugfix, and an "uninitialized data"
leak fix for the core"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Documentation: i2c: add i2c-sysfs into index
i2c: dev: zero out array used for i2c reads from userspace
i2c: iproc: fix race between client unreg and tasklet
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYReBzAAKCRCAXGG7T9hj
vsjcAQD9tV9ThjOP9HXL3lGGoSIBCy+t92ZwpVkQuYITa9fHFAD/ViU+Iye5WHTf
jWxlveDJMoOegEmpKEQAoX56hDHPkww=
=lQOv
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.14-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"A small cleanup patch and a fix of a rare race in the Xen evtchn
driver"
* tag 'for-linus-5.14-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/events: Fix race in set_evtchn_to_irq
xen/events: remove redundant initialization of variable irq
* A fix to avoid passing -mno-relax to compilers that don't support it.
* A comment fix.
-----BEGIN PGP SIGNATURE-----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=4Fkm
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- avoid passing -mno-relax to compilers that don't support it
- a comment fix
* tag 'riscv-for-linus-5.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix comment regarding kernel mapping overlapping with IS_ERR_VALUE
riscv: kexec: do not add '-mno-relax' flag if compiler doesn't support it
- fix to revert to the historic write behavior (Bart Van Assche)
-----BEGIN PGP SIGNATURE-----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=dsC9
-----END PGP SIGNATURE-----
Merge tag 'configfs-5.14' of git://git.infradead.org/users/hch/configfs
Pull configfs fix from Christoph Hellwig:
- fix to revert to the historic write behavior (Bart Van Assche)
* tag 'configfs-5.14' of git://git.infradead.org/users/hch/configfs:
configfs: restore the kernel v5.13 text attribute write behavior
commit <47595e32869f> ("<MAINTAINERS: Mark some staging directories>")
indicated the ipx network layer as obsolete in Jan 2018,
updated in the MAINTAINERS file.
now, after being exposed for 3 years to refactoring, so to
remove the ipx network layer info from MAINTAINERS.
additionally, there is no module that depends on ipx.h
except a broken staging driver(r8188eu)
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit <47595e32869f> ("<MAINTAINERS: Mark some staging directories>")
indicated the ipx network layer as obsolete in Jan 2018,
updated in the MAINTAINERS file
now, after being exposed for 3 years to refactoring, so to
delete uapi/linux/ipx.h and net/ipx.h header files for good.
additionally, there is no module that depends on ipx.h except
a broken staging driver(r8188eu)
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder says:
====================
net: ipa: last things before PM conversion
This series contains a few remaining changes needed before fully
switching over to using runtime power management rather than the
previous "IPA clock" mechanism.
The first patch moves the calls to enable and disable the IPA
interrupt as a system wakeup interrupt into "ipa_clock.c" with the
rest of the power-related code.
The second adds a flag to make it possible to distinguish runtime
suspend from system suspend.
The third and fourth patches arrange for the ->start_xmit path to
resume hardware if necessary, to ensure it is powered. If power is
not active, the TX queue is stopped, and arrangements are made for
the queue to be restarted once hardware power is active again.
The fifth patch keeps the TX queue active during suspend. This
isn't necessary for system suspend but it's important for runtime
suspend.
And the last patch makes it so we don't hold the hardware active
while the modem network device is open.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently a clock reference is taken whenever the ->ndo_open
callback for the modem netdev is called. That reference is dropped
when the device is closed, in ipa_stop().
We no longer need this, because ipa_start_xmit() now handles the
situation where the hardware power state is not active.
Drop the clock reference in ipa_open() when we're done, and take a
new reference in ipa_stop() before we begin closing the interface.
Finally (and unrelated, but trivial), change the return type of
ipa_start_xmit() to be netdev_tx_t instead of int.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we stop the modem netdev transmit queue when suspending
the hardware. For system suspend this ensured we'd never attempt
to transmit while attempting to suspend the modem endpoints.
For runtime suspend, the IPA hardware might get suspended while the
system is operating. In that case we want an attempt to transmit a
packet to cause the hardware to resume if necessary. But if we
disable the queue this cannot happen.
So stop disabling the queue on suspend. In case we end up disabling
it in ipa_start_xmit() (see the previous commit), we still arrange
to start the TX queue on resume.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to ensure the hardware is powered when we transmit a packet.
But if it's not, we can't block to wait for it. So asynchronously
request power in ipa_start_xmit(), and only proceed if the return
value indicates the power state is active.
If the hardware is not active, a runtime resume request will have
been initiated. In that case, stop the network stack from further
transmit attempts until the resume completes. Return NETDEV_TX_BUSY,
to retry sending the packet once the queue is restarted.
If the power request returns an error (other than -EINPROGRESS,
which just means a resume requested elsewhere isn't complete), just
drop the packet.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Create a new work structure in the modem private data, and use it to
re-enable the modem network device transmit queue when resuming.
This is needed by the next patch, which stops the TX queue if IPA
power isn't active when a transmit request arrives. Packets will
start arriving the instant the TX queue is enabled, but resuming
isn't complete until ipa_modem_resume() returns. This way we're
sure to be resumed before transmits are allowed again.
Cancel it before calling ipa_stop() in ipa_modem_stop() to ensure
the transmit queue restart completes before it gets stopped there.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new flag that is set when the hardware is suspended due to a
system suspend operation, distingishing it from runtime suspend.
Use it in the SUSPEND IPA interrupt handler to determine whether to
trigger a system resume because of the event. Define new suspend
and resume power management callback functions to set and clear the
new flag, respectively.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the call to enable the IPA interrupt as a wakeup interrupt into
ipa_power_setup(), disable it in ipa_power_teardown().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov says:
====================
net: bridge: mcast: dump querier state
This set adds the ability to dump the current multicast querier state.
This is extremely useful when debugging multicast issues, we've had
many cases of unexpected queriers causing strange behaviour and mcast
test failures. The first patch changes the querier struct to record
a port device's ifindex instead of a pointer to the port itself so we
can later retrieve it, I chose this way because it's much simpler
and doesn't require us to do querier port ref counting, it is best
effort anyway. Then patch 02 makes the querier address/port updates
consistent via a combination of multicast_lock and seqcount, so readers
can only use seqcount to get a consistent snapshot of address and port.
Patch 03 is a minor cleanup in preparation for the dump support, it
consolidates IPv4 and IPv6 querier selection paths as they share most of
the logic (except address comparisons of course). Finally the last three
patches add the new querier state dumping support, for the bridge's
global multicast context we embed the BRIDGE_QUERIER_xxx attributes
into IFLA_BR_MCAST_QUERIER_STATE and for the per-vlan global mcast
contexts we embed them into BRIDGE_VLANDB_GOPTS_MCAST_QUERIER_STATE.
The structure is:
[IFLA_BR_MCAST_QUERIER_STATE / BRIDGE_VLANDB_GOPTS_MCAST_QUERIER_STATE]
`[BRIDGE_QUERIER_IP_ADDRESS] - ip address of the querier
`[BRIDGE_QUERIER_IP_PORT] - bridge port ifindex where the querier was
seen (set only if external querier)
`[BRIDGE_QUERIER_IP_OTHER_TIMER] - other querier timeout
`[BRIDGE_QUERIER_IPV6_ADDRESS] - ip address of the querier
`[BRIDGE_QUERIER_IPV6_PORT] - bridge port ifindex where the querier
was seen (set only if external querier)
`[BRIDGE_QUERIER_IPV6_OTHER_TIMER] - other querier timeout
Later we can also add IGMP version of seen queriers and last seen values
from the queries.
====================
Use the new mcast querier state dump infrastructure and export vlans'
mcast context querier state embedded in attribute
BRIDGE_VLANDB_GOPTS_MCAST_QUERIER_STATE.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for dumping global IPv6 querier state, we dump the state
only if our own querier is enabled or there has been another external
querier which has won the election. For the bridge global state we use
a new attribute IFLA_BR_MCAST_QUERIER_STATE and embed the state inside.
The structure is:
[IFLA_BR_MCAST_QUERIER_STATE]
`[BRIDGE_QUERIER_IPV6_ADDRESS] - ip address of the querier
`[BRIDGE_QUERIER_IPV6_PORT] - bridge port ifindex where the querier
was seen (set only if external querier)
`[BRIDGE_QUERIER_IPV6_OTHER_TIMER] - other querier timeout
IPv4 and IPv6 attributes are embedded at the same level of
IFLA_BR_MCAST_QUERIER_STATE. If we didn't dump anything we cancel the nest
and return.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for dumping global IPv4 querier state, we dump the state
only if our own querier is enabled or there has been another external
querier which has won the election. For the bridge global state we use
a new attribute IFLA_BR_MCAST_QUERIER_STATE and embed the state inside.
The structure is:
[IFLA_BR_MCAST_QUERIER_STATE]
`[BRIDGE_QUERIER_IP_ADDRESS] - ip address of the querier
`[BRIDGE_QUERIER_IP_PORT] - bridge port ifindex where the querier was
seen (set only if external querier)
`[BRIDGE_QUERIER_IP_OTHER_TIMER] - other querier timeout
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can consolidate both functions as they share almost the same logic.
This is easier to maintain and we have a single querier update function.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use a sequence counter to make sure port/address updates can be read
consistently without requiring the bridge multicast_lock. We need to
zero out the port and address when the other querier has expired and
we're about to select ourselves as querier. br_multicast_read_querier
will be used later when dumping querier state. Updates are done only
with the multicast spinlock and softirqs disabled, while reads are done
from process context and from softirqs (due to notifications).
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently when a querier port is detected its net_bridge_port pointer is
recorded, but it's used only for comparisons so it's fine to have stale
pointer, in order to dereference and use the port pointer a proper
accounting of its usage must be implemented adding unnecessary
complexity. To solve the problem we can just store the netdevice ifindex
instead of the port pointer and retrieve the bridge port. It is a best
effort and the device needs to be validated that is still part of that
bridge before use, but that is small price to pay for avoiding querier
reference counting for each port/vlan.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Leon Romanovsky says:
====================
Devlink cleanup for delay event series
Jakub's request to make sure that devlink events are delayed and not
printed till they fully accessible [1] requires us to implement delayed
event notification system in the devlink.
In order to do it, I moved some of my patches (xarray e.t.c) from the future
series to be before "Move devlink_register to be near devlink_reload_enable" [2].
That allows us to rely on DEVLINK_REGISTERED xarray mark to decide if to print
event or not.
Other patches are simple cleanup which is needed anyway.
[1] https://lore.kernel.org/lkml/20210811071817.4af5ab34@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com
[2] https://lore.kernel.org/lkml/cover.1628599239.git.leonro@nvidia.com
Next in the queue:
* Delay event series
* Move devlink_register to be near devlink_reload_enable"
* Extension of devlink_ops to be set dynamically
* devlink_reload_* delete
* Devlink locks rework to user xarray and reference counting
* ????
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The devlink pointer always exists after hclge_devlink_init() succeed.
Remove that check together with NULL setting after release and ensure
that devlink_register is last command prior to call to devlink_reload_enable().
Fixes: b741269b27 ("net: hns3: add support for registering devlink for PF")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The { 0 } doesn't clear all fields in the struct, but tells to the
compiler to set all fields to zero and doesn't touch any sub-fields
if they exists.
The {} is an empty initialiser that instructs to fully initialize whole
struct including sub-fields, which is error-prone for future
devlink_flash_notify extensions.
Fixes: 6700acc5f1 ("devlink: collect flash notify params into a struct")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can use xarray instead of linearly organized linked lists for the
devlink instances. This will let us revise the locking scheme in favour
of internal xarray locking that protects database.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The struct devlink itself is protected by internal lock and doesn't
need global lock during operation. That global lock is used to protect
addition/removal new devlink instances from the global list in use by
all devlink consumers in the system.
The future conversion of linked list to be xarray will allow us to
actually delete that lock, but first we need to count all struct devlink
users.
The reference counting provides us a way to ensure that no new user
space commands success to grab devlink instance which is going to be
destroyed makes it is safe to access it without lock.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Devlink objects are accessible only after they were registered and
have valid devlink_*->devlink pointers.
Remove that check and simplify respective fill functions as an outcome
of such change.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The devlink_pernet_pre_exit() will be called if net namespace exits.
That routine is relevant for devlink instances that were assigned to
that namespaces first. This assignment is possible only with the following
command: "devlink reload DEV netns ...", which already checks reload support.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mat Martineau says:
====================
mptcp: Improve use of backup subflows
Multipath TCP combines multiple TCP subflows in to one stream, and the
MPTCP-level socket must decide which subflow to use when sending (or
resending) chunks of data. The choice of the "best" subflow to transmit
on can vary depending on the priority (normal or backup) for each
subflow and how well the subflow is performing.
In order to improve MPTCP performance when some subflows are failing,
this patch set changes how backup subflows are utilized and introduces
tracking of "stale" subflows that are still connected but not making
progress.
Patch 1 adjusts MPTCP-level retransmit timeouts to use data from all
subflows.
Patch 2 makes MPTCP-level retransmissions less aggressive to avoid
resending data that's still queued at the TCP level.
Patch 3 changes the way pending data is handled when subflows are
closed. Unacked MPTCP-level data still in the subflow tx queue is
immediately moved to another subflow for transmission instead of waiting
for MPTCP-level timeouts to trigger retransmission.
Patch 4 has some sysctl code cleanup.
Patches 5 and 6 add tracking of "stale" subflows, so only underlying TCP
subflow connections that appear to be making progress are considered
when selecting a subflow to (re)transmit data. How fast a subflow goes
stale is configurable with a per-namespace sysctl. Related MIBS are
added too.
Patch 7 makes sure the backup flag is always correctly recorded when the
MP_JOIN SYN/ACK is received for an added subflow.
Patch 8 adds more test cases for backup subflows and stale subflows.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add more test-case for link failures scenario,
including recovery from link failure using only
backup subflows and bi-directional transfer.
Additionally explicitly check for stale count
Co-developed-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
the parsed incoming backup flag is not propagated
to the subflow itself, the client may end-up using it
to send data.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/191
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This allows monitoring exceptional events like
active backup scenarios.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The msk can use backup subflows to transmit in-sequence data
only if there are no other active subflow. On active backup
scenario, the MPTCP connection can do forward progress only
due to MPTCP retransmissions - rtx can pick backup subflows.
This patch introduces a new flag flow MPTCP subflows: if the
underlying TCP connection made no progresses for long time,
and there are other less problematic subflows available, the
given subflow become stale.
Stale subflows are not considered active: if all non backup
subflows become stale, the MPTCP scheduler can pick backup
subflows for plain transmissions.
Stale subflows can return in active state, as soon as any reply
from the peer is observed.
Active backup scenarios can now leverage the available b/w
with no restrinction.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/207
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reorder the data in mptcp_pernet to avoid wasting space
with no reasons and constify the access helpers.
No functional changes intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PM can close active subflow, e.g. due to ingress RM_ADDR
option. Such subflow could carry data still unacked at the
MPTCP-level, both in the write and the rtx_queue, which has
never reached the other peer.
Currently the mptcp-level retransmission will deliver such data,
but at a very low rate (at most 1 DSM for each MPTCP rtx interval).
We can speed-up the recovery a lot, moving all the unacked in the
tcp write_queue, so that it will be pushed again via other
subflows, at the speed allowed by them.
Also make available the new helper for later patches.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/207
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller