When looking up the pool_workqueue to use for an unbound workqueue,
workqueue assumes that the target CPU is always bound to a valid NUMA
node. However, currently, when a CPU goes offline, the mapping is
destroyed and cpu_to_node() returns NUMA_NO_NODE.
This has always been broken but hasn't triggered often enough before
874bbfe600 ("workqueue: make sure delayed work run in local cpu").
After the commit, workqueue forcifully assigns the local CPU for
delayed work items without explicit target CPU to fix a different
issue. This widens the window where CPU can go offline while a
delayed work item is pending causing delayed work items dispatched
with target CPU set to an already offlined CPU. The resulting
NUMA_NO_NODE mapping makes workqueue try to queue the work item on a
NULL pool_workqueue and thus crash.
While 874bbfe600 has been reverted for a different reason making the
bug less visible again, it can still happen. Fix it by mapping
NUMA_NO_NODE to the default pool_workqueue from unbound_pwq_by_node().
This is a temporary workaround. The long term solution is keeping CPU
-> NODE mapping stable across CPU off/online cycles which is being
worked on.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Len Brown <len.brown@intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/g/1454424264.11183.46.camel@gmail.com
Link: http://lkml.kernel.org/g/1453702100-2597-1-git-send-email-tangchen@cn.fujitsu.com
Workqueue used to guarantee local execution for work items queued
without explicit target CPU. The guarantee is gone now which can
break some usages in subtle ways. To flush out those cases, this
patch implements a debug feature which forces round-robin CPU
selection for all such work items.
The debug feature defaults to off and can be enabled with a kernel
parameter. The default can be flipped with a debug config option.
If you hit this commit during bisection, please refer to 041bd12e27
("Revert "workqueue: make sure delayed work run in local cpu"") for
more information and ping me.
Signed-off-by: Tejun Heo <tj@kernel.org>
WORK_CPU_UNBOUND work items queued to a bound workqueue always run
locally. This is a good thing normally, but not when the user has
asked us to keep unbound work away from certain CPUs. Round robin
these to wq_unbound_cpumask CPUs instead, as perturbation avoidance
trumps performance.
tj: Cosmetic and comment changes. WARN_ON_ONCE() dropped from empty
(wq_unbound_cpumask AND cpu_online_mask). If we want that, it
should be done when config changes.
Signed-off-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This reverts commit 874bbfe600.
Workqueue used to implicity guarantee that work items queued without
explicit CPU specified are put on the local CPU. Recent changes in
timer broke the guarantee and led to vmstat breakage which was fixed
by 176bed1de5 ("vmstat: explicitly schedule per-cpu work on the CPU
we need it to run on").
vmstat is the most likely to expose the issue and it's quite possible
that there are other similar problems which are a lot more difficult
to trigger. As a preventive measure, 874bbfe600 ("workqueue: make
sure delayed work run in local cpu") was applied to restore the local
CPU guarnatee. Unfortunately, the change exposed a bug in timer code
which got fixed by 22b886dd10 ("timers: Use proper base migration in
add_timer_on()"). Due to code restructuring, the commit couldn't be
backported beyond certain point and stable kernels which only had
874bbfe600 started crashing.
The local CPU guarantee was accidental more than anything else and we
want to get rid of it anyway. As, with the vmstat case fixed,
874bbfe600 is causing more problems than it's fixing, it has been
decided to take the chance and officially break the guarantee by
reverting the commit. A debug feature will be added to force foreign
CPU assignment to expose cases relying on the guarantee and fixes for
the individual cases will be backported to stable as necessary.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 874bbfe600 ("workqueue: make sure delayed work run in local cpu")
Link: http://lkml.kernel.org/g/20160120211926.GJ10810@quack.suse.cz
Cc: stable@vger.kernel.org
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Daniel Bilik <daniel.bilik@neosystem.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Shaohua Li <shli@fb.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Daniel Bilik <daniel.bilik@neosystem.cz>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
fca839c00a ("workqueue: warn if memory reclaim tries to flush
!WQ_MEM_RECLAIM workqueue") implemented flush dependency warning which
triggers if a PF_MEMALLOC task or WQ_MEM_RECLAIM workqueue tries to
flush a !WQ_MEM_RECLAIM workquee.
This assumes that workqueues marked with WQ_MEM_RECLAIM sit in memory
reclaim path and making it depend on something which may need more
memory to make forward progress can lead to deadlocks. Unfortunately,
workqueues created with the legacy create*_workqueue() interface
always have WQ_MEM_RECLAIM regardless of whether they are depended
upon memory reclaim or not. These spurious WQ_MEM_RECLAIM markings
cause spurious triggering of the flush dependency checks.
WARNING: CPU: 0 PID: 6 at kernel/workqueue.c:2361 check_flush_dependency+0x138/0x144()
workqueue: WQ_MEM_RECLAIM deferwq:deferred_probe_work_func is flushing !WQ_MEM_RECLAIM events:lru_add_drain_per_cpu
...
Workqueue: deferwq deferred_probe_work_func
[<c0017acc>] (unwind_backtrace) from [<c0013134>] (show_stack+0x10/0x14)
[<c0013134>] (show_stack) from [<c0245f18>] (dump_stack+0x94/0xd4)
[<c0245f18>] (dump_stack) from [<c0026f9c>] (warn_slowpath_common+0x80/0xb0)
[<c0026f9c>] (warn_slowpath_common) from [<c0026ffc>] (warn_slowpath_fmt+0x30/0x40)
[<c0026ffc>] (warn_slowpath_fmt) from [<c00390b8>] (check_flush_dependency+0x138/0x144)
[<c00390b8>] (check_flush_dependency) from [<c0039ca0>] (flush_work+0x50/0x15c)
[<c0039ca0>] (flush_work) from [<c00c51b0>] (lru_add_drain_all+0x130/0x180)
[<c00c51b0>] (lru_add_drain_all) from [<c00f728c>] (migrate_prep+0x8/0x10)
[<c00f728c>] (migrate_prep) from [<c00bfbc4>] (alloc_contig_range+0xd8/0x338)
[<c00bfbc4>] (alloc_contig_range) from [<c00f8f18>] (cma_alloc+0xe0/0x1ac)
[<c00f8f18>] (cma_alloc) from [<c001cac4>] (__alloc_from_contiguous+0x38/0xd8)
[<c001cac4>] (__alloc_from_contiguous) from [<c001ceb4>] (__dma_alloc+0x240/0x278)
[<c001ceb4>] (__dma_alloc) from [<c001cf78>] (arm_dma_alloc+0x54/0x5c)
[<c001cf78>] (arm_dma_alloc) from [<c0355ea4>] (dmam_alloc_coherent+0xc0/0xec)
[<c0355ea4>] (dmam_alloc_coherent) from [<c039cc4c>] (ahci_port_start+0x150/0x1dc)
[<c039cc4c>] (ahci_port_start) from [<c0384734>] (ata_host_start.part.3+0xc8/0x1c8)
[<c0384734>] (ata_host_start.part.3) from [<c03898dc>] (ata_host_activate+0x50/0x148)
[<c03898dc>] (ata_host_activate) from [<c039d558>] (ahci_host_activate+0x44/0x114)
[<c039d558>] (ahci_host_activate) from [<c039f05c>] (ahci_platform_init_host+0x1d8/0x3c8)
[<c039f05c>] (ahci_platform_init_host) from [<c039e6bc>] (tegra_ahci_probe+0x448/0x4e8)
[<c039e6bc>] (tegra_ahci_probe) from [<c0347058>] (platform_drv_probe+0x50/0xac)
[<c0347058>] (platform_drv_probe) from [<c03458cc>] (driver_probe_device+0x214/0x2c0)
[<c03458cc>] (driver_probe_device) from [<c0343cc0>] (bus_for_each_drv+0x60/0x94)
[<c0343cc0>] (bus_for_each_drv) from [<c03455d8>] (__device_attach+0xb0/0x114)
[<c03455d8>] (__device_attach) from [<c0344ab8>] (bus_probe_device+0x84/0x8c)
[<c0344ab8>] (bus_probe_device) from [<c0344f48>] (deferred_probe_work_func+0x68/0x98)
[<c0344f48>] (deferred_probe_work_func) from [<c003b738>] (process_one_work+0x120/0x3f8)
[<c003b738>] (process_one_work) from [<c003ba48>] (worker_thread+0x38/0x55c)
[<c003ba48>] (worker_thread) from [<c0040f14>] (kthread+0xdc/0xf4)
[<c0040f14>] (kthread) from [<c000f778>] (ret_from_fork+0x14/0x3c)
Fix it by marking workqueues created via create*_workqueue() with
__WQ_LEGACY and disabling flush dependency checks on them.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Thierry Reding <thierry.reding@gmail.com>
Link: http://lkml.kernel.org/g/20160126173843.GA11115@ulmo.nvidia.com
Fixes: fca839c00a ("workqueue: warn if memory reclaim tries to flush !WQ_MEM_RECLAIM workqueue")
If the apply_wqattrs_prepare() returns NULL, it has already cleaned up
the related resources, so it can return directly and avoid calling the
clean up function again.
This doesn't introduce any functional changes.
Signed-off-by: wanghaibin <wanghaibin.wang@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Workqueue stalls can happen from a variety of usage bugs such as
missing WQ_MEM_RECLAIM flag or concurrency managed work item
indefinitely staying RUNNING. These stalls can be extremely difficult
to hunt down because the usual warning mechanisms can't detect
workqueue stalls and the internal state is pretty opaque.
To alleviate the situation, this patch implements workqueue lockup
detector. It periodically monitors all worker_pools periodically and,
if any pool failed to make forward progress longer than the threshold
duration, triggers warning and dumps workqueue state as follows.
BUG: workqueue lockup - pool cpus=0 node=0 flags=0x0 nice=0 stuck for 31s!
Showing busy workqueues and worker pools:
workqueue events: flags=0x0
pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=17/256
pending: monkey_wrench_fn, e1000_watchdog, cache_reap, vmstat_shepherd, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, release_one_tty, cgroup_release_agent
workqueue events_power_efficient: flags=0x80
pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=2/256
pending: check_lifetime, neigh_periodic_work
workqueue cgroup_pidlist_destroy: flags=0x0
pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/1
pending: cgroup_pidlist_destroy_work_fn
...
The detection mechanism is controller through kernel parameter
workqueue.watchdog_thresh and can be updated at runtime through the
sysfs module parameter file.
v2: Decoupled from softlockup control knobs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Don Zickus <dzickus@redhat.com>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Chris Mason <clm@fb.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Task or work item involved in memory reclaim trying to flush a
non-WQ_MEM_RECLAIM workqueue or one of its work items can lead to
deadlock. Trigger WARN_ONCE() if such conditions are detected.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Pull workqueue update from Tejun Heo:
"This pull request contains one patch to make an unbound worker pool
allocated from the NUMA node containing it if such node exists. As
unbound worker pools are node-affine by default, this makes most pools
allocated on the right node"
* 'for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Allocate the unbound pool using local node memory
Currently, get_unbound_pool() uses kzalloc() to allocate the
worker pool. Actually, we can use the right node to do the
allocation, achieving local memory access.
This patch selects target node first, and uses kzalloc_node()
instead.
Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
My system keeps crashing with below message. vmstat_update() schedules a delayed
work in current cpu and expects the work runs in the cpu.
schedule_delayed_work() is expected to make delayed work run in local cpu. The
problem is timer can be migrated with NO_HZ. __queue_work() queues work in
timer handler, which could run in a different cpu other than where the delayed
work is scheduled. The end result is the delayed work runs in different cpu.
The patch makes __queue_delayed_work records local cpu earlier. Where the timer
runs doesn't change where the work runs with the change.
[ 28.010131] ------------[ cut here ]------------
[ 28.010609] kernel BUG at ../mm/vmstat.c:1392!
[ 28.011099] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN
[ 28.011860] Modules linked in:
[ 28.012245] CPU: 0 PID: 289 Comm: kworker/0:3 Tainted: G W4.3.0-rc3+ #634
[ 28.013065] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140709_153802- 04/01/2014
[ 28.014160] Workqueue: events vmstat_update
[ 28.014571] task: ffff880117682580 ti: ffff8800ba428000 task.ti: ffff8800ba428000
[ 28.015445] RIP: 0010:[<ffffffff8115f921>] [<ffffffff8115f921>]vmstat_update+0x31/0x80
[ 28.016282] RSP: 0018:ffff8800ba42fd80 EFLAGS: 00010297
[ 28.016812] RAX: 0000000000000000 RBX: ffff88011a858dc0 RCX:0000000000000000
[ 28.017585] RDX: ffff880117682580 RSI: ffffffff81f14d8c RDI:ffffffff81f4df8d
[ 28.018366] RBP: ffff8800ba42fd90 R08: 0000000000000001 R09:0000000000000000
[ 28.019169] R10: 0000000000000000 R11: 0000000000000121 R12:ffff8800baa9f640
[ 28.019947] R13: ffff88011a81e340 R14: ffff88011a823700 R15:0000000000000000
[ 28.020071] FS: 0000000000000000(0000) GS:ffff88011a800000(0000)knlGS:0000000000000000
[ 28.020071] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 28.020071] CR2: 00007ff6144b01d0 CR3: 00000000b8e93000 CR4:00000000000006f0
[ 28.020071] Stack:
[ 28.020071] ffff88011a858dc0 ffff8800baa9f640 ffff8800ba42fe00ffffffff8106bd88
[ 28.020071] ffffffff8106bd0b 0000000000000096 0000000000000000ffffffff82f9b1e8
[ 28.020071] ffffffff829f0b10 0000000000000000 ffffffff81f18460ffff88011a81e340
[ 28.020071] Call Trace:
[ 28.020071] [<ffffffff8106bd88>] process_one_work+0x1c8/0x540
[ 28.020071] [<ffffffff8106bd0b>] ? process_one_work+0x14b/0x540
[ 28.020071] [<ffffffff8106c214>] worker_thread+0x114/0x460
[ 28.020071] [<ffffffff8106c100>] ? process_one_work+0x540/0x540
[ 28.020071] [<ffffffff81071bf8>] kthread+0xf8/0x110
[ 28.020071] [<ffffffff81071b00>] ?kthread_create_on_node+0x200/0x200
[ 28.020071] [<ffffffff81a6522f>] ret_from_fork+0x3f/0x70
[ 28.020071] [<ffffffff81071b00>] ?kthread_create_on_node+0x200/0x200
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org # v2.6.31+
Pull workqueue updates from Tejun Heo:
"Only three trivial changes for workqueue this time - doc, MAINTAINERS
and EXPORT_SYMBOL updates"
* 'for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: fix some docbook warnings
workqueue: Make flush_workqueue() available again to non GPL modules
workqueue: add myself as a dedicated reviwer
Pull scheduler updates from Ingo Molnar:
"The biggest change in this cycle is the rewrite of the main SMP load
balancing metric: the CPU load/utilization. The main goal was to make
the metric more precise and more representative - see the changelog of
this commit for the gory details:
9d89c257df ("sched/fair: Rewrite runnable load and utilization average tracking")
It is done in a way that significantly reduces complexity of the code:
5 files changed, 249 insertions(+), 494 deletions(-)
and the performance testing results are encouraging. Nevertheless we
need to keep an eye on potential regressions, since this potentially
affects every SMP workload in existence.
This work comes from Yuyang Du.
Other changes:
- SCHED_DL updates. (Andrea Parri)
- Simplify architecture callbacks by removing finish_arch_switch().
(Peter Zijlstra et al)
- cputime accounting: guarantee stime + utime == rtime. (Peter
Zijlstra)
- optimize idle CPU wakeups some more - inspired by Facebook server
loads. (Mike Galbraith)
- stop_machine fixes and updates. (Oleg Nesterov)
- Introduce the 'trace_sched_waking' tracepoint. (Peter Zijlstra)
- sched/numa tweaks. (Srikar Dronamraju)
- misc fixes and small cleanups"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
sched/deadline: Fix comment in enqueue_task_dl()
sched/deadline: Fix comment in push_dl_tasks()
sched: Change the sched_class::set_cpus_allowed() calling context
sched: Make sched_class::set_cpus_allowed() unconditional
sched: Fix a race between __kthread_bind() and sched_setaffinity()
sched: Ensure a task has a non-normalized vruntime when returning back to CFS
sched/numa: Fix NUMA_DIRECT topology identification
tile: Reorganize _switch_to()
sched, sparc32: Update scheduler comments in copy_thread()
sched: Remove finish_arch_switch()
sched, tile: Remove finish_arch_switch
sched, sh: Fold finish_arch_switch() into switch_to()
sched, score: Remove finish_arch_switch()
sched, avr32: Remove finish_arch_switch()
sched, MIPS: Get rid of finish_arch_switch()
sched, arm: Remove finish_arch_switch()
sched/fair: Clean up load average references
sched/fair: Provide runnable_load_avg back to cfs_rq
sched/fair: Remove task and group entity load when they are dead
sched/fair: Init cfs_rq's sched_entity load average
...
Because sched_setscheduler() checks p->flags & PF_NO_SETAFFINITY
without locks, a caller might observe an old value and race with the
set_cpus_allowed_ptr() call from __kthread_bind() and effectively undo
it:
__kthread_bind()
do_set_cpus_allowed()
<SYSCALL>
sched_setaffinity()
if (p->flags & PF_NO_SETAFFINITIY)
set_cpus_allowed_ptr()
p->flags |= PF_NO_SETAFFINITY
Fix the bug by putting everything under the regular scheduler locks.
This also closes a hole in the serialization of task_struct::{nr_,}cpus_allowed.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dedekind1@gmail.com
Cc: juri.lelli@arm.com
Cc: mgorman@suse.de
Cc: riel@redhat.com
Cc: rostedt@goodmis.org
Link: http://lkml.kernel.org/r/20150515154833.545640346@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit 37b1ef31a5 ("workqueue: move
flush_scheduled_work() to workqueue.h") moved the exported non GPL
flush_scheduled_work() from a function to an inline wrapper.
Unfortunately, it directly calls flush_workqueue() which is a GPL function.
This has the effect of changing the licensing requirement for this function
and makes it unavailable to non GPL modules.
See commit ad7b1f841f ("workqueue: Make
schedule_work() available again to non GPL modules") for precedent.
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This commit renames rcu_lockdep_assert() to RCU_LOCKDEP_WARN() for
consistency with the WARN() series of macros. This also requires
inverting the sense of the conditional, which this commit also does.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Main excitement here is Peter Zijlstra's lockless rbtree optimization to
speed module address lookup. He found some abusers of the module lock
doing that too.
A little bit of parameter work here too; including Dan Streetman's breaking
up the big param mutex so writing a parameter can load another module (yeah,
really). Unfortunately that broke the usual suspects, !CONFIG_MODULES and
!CONFIG_SYSFS, so those fixes were appended too.
Cheers,
Rusty.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=tWPQ
-----END PGP SIGNATURE-----
Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull module updates from Rusty Russell:
"Main excitement here is Peter Zijlstra's lockless rbtree optimization
to speed module address lookup. He found some abusers of the module
lock doing that too.
A little bit of parameter work here too; including Dan Streetman's
breaking up the big param mutex so writing a parameter can load
another module (yeah, really). Unfortunately that broke the usual
suspects, !CONFIG_MODULES and !CONFIG_SYSFS, so those fixes were
appended too"
* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (26 commits)
modules: only use mod->param_lock if CONFIG_MODULES
param: fix module param locks when !CONFIG_SYSFS.
rcu: merge fix for Convert ACCESS_ONCE() to READ_ONCE() and WRITE_ONCE()
module: add per-module param_lock
module: make perm const
params: suppress unused variable error, warn once just in case code changes.
modules: clarify CONFIG_MODULE_COMPRESS help, suggest 'N'.
kernel/module.c: avoid ifdefs for sig_enforce declaration
kernel/workqueue.c: remove ifdefs over wq_power_efficient
kernel/params.c: export param_ops_bool_enable_only
kernel/params.c: generalize bool_enable_only
kernel/module.c: use generic module param operaters for sig_enforce
kernel/params: constify struct kernel_param_ops uses
sysfs: tightened sysfs permission checks
module: Rework module_addr_{min,max}
module: Use __module_address() for module_address_lookup()
module: Make the mod_tree stuff conditional on PERF_EVENTS || TRACING
module: Optimize __module_address() using a latched RB-tree
rbtree: Implement generic latch_tree
seqlock: Introduce raw_read_seqcount_latch()
...
tj: dropped iff -> if, iff is if and only if not a typo. Spotted by
Randy Dunlap.
Signed-off-by: Shailendra Verma <shailendra.capricorn@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
We can avoid an ifdef over wq_power_efficient's declaration
by just using IS_ENABLED().
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: cocci@systeme.lip6.fr
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
flush_scheduled_work() is just a simple call to flush_work().
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reading to wq->unbound_attrs requires protection of either wq_pool_mutex
or wq->mutex, and wq_sysfs_prep_attrs() is called with wq_pool_mutex held,
so we don't need to grab wq->mutex here.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This pre-declaration was unneeded since a previous refactor patch
6ba94429c8 ("workqueue: Reorder sysfs code").
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Current modification to attrs via sysfs is not fully synchronized.
Process A (change cpumask) | Process B (change numa affinity)
wq_cpumask_store() |
wq_sysfs_prep_attrs() |
| apply_workqueue_attrs()
apply_workqueue_attrs() |
It results that the Process B's operation is totally reverted
without any notification, it is a buggy behavior. So this patch
moves wq_sysfs_prep_attrs() into the protection under wq_pool_mutex
to ensure attrs changes are properly synchronized.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Applying attrs requires two locks: get_online_cpus() and wq_pool_mutex,
and this code is duplicated at two places (apply_workqueue_attrs() and
workqueue_set_unbound_cpumask()). So we separate out this locking
code into apply_wqattrs_[un]lock() and do a minor refactor on
apply_workqueue_attrs().
The apply_wqattrs_[un]lock() will be also used on later patch for
ensuring attrs changes are properly synchronized.
tj: minor updates to comments
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
wq_update_unbound_numa() is known be called with wq_pool_mutex held.
But wq_update_unbound_numa() requests wq->mutex before reading
wq->unbound_attrs, wq->numa_pwq_tbl[] and wq->dfl_pwq. But these fields
were changed to be allowed being read with wq_pool_mutex held. So we
simply remove the mutex_lock(&wq->mutex).
Without the dependence on the the mutex_lock(&wq->mutex), the test
of wq->unbound_attrs->no_numa can also be moved upward.
The old code need a long comment to describe the stableness of
@wq->unbound_attrs which is also guaranteed by wq_pool_mutex now,
so we don't need this such comment.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Current wq_pool_mutex doesn't proctect the attrs-installation, it results
that ->unbound_attrs, ->numa_pwq_tbl[] and ->dfl_pwq can only be accessed
under wq->mutex and causes some inconveniences. Example, wq_update_unbound_numa()
has to acquire wq->mutex before fetching the wq->unbound_attrs->no_numa
and the old_pwq.
attrs-installation is a short operation, so this change will no cause any
latency for other operations which also acquire the wq_pool_mutex.
The only unprotected attrs-installation code is in apply_workqueue_attrs(),
so this patch touches code less than comments.
It is also a preparation patch for next several patches which read
wq->unbound_attrs, wq->numa_pwq_tbl[] and wq->dfl_pwq with
only wq_pool_mutex held.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Allow to modify the low-level unbound workqueues cpumask through
sysfs. This is performed by traversing the entire workqueue list
and calling apply_wqattrs_prepare() on the unbound workqueues
with the new low level mask. Only after all the preparation are done,
we commit them all together.
Ordered workqueues are ignored from the low level unbound workqueue
cpumask, it will be handled in near future.
All the (default & per-node) pwqs are mandatorily controlled by
the low level cpumask. If the user configured cpumask doesn't overlap
with the low level cpumask, the low level cpumask will be used for the
wq instead.
The comment of wq_calc_node_cpumask() is updated and explicitly
requires that its first argument should be the attrs of the default
pwq.
The default wq_unbound_cpumask is cpu_possible_mask. The workqueue
subsystem doesn't know its best default value, let the system manager
or the other subsystem set it when needed.
Changed from V8:
merge the calculating code for the attrs of the default pwq together.
minor change the code&comments for saving the user configured attrs.
remove unnecessary list_del().
minor update the comment of wq_calc_node_cpumask().
update the comment of workqueue_set_unbound_cpumask();
Cc: Christoph Lameter <cl@linux.com>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Mike Galbraith <bitbucket@online.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Original-patch-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Create a cpumask that limits the affinity of all unbound workqueues.
This cpumask is controlled through a file at the root of the workqueue
sysfs directory.
It works on a lower-level than the per WQ_SYSFS workqueues cpumask files
such that the effective cpumask applied for a given unbound workqueue is
the intersection of /sys/devices/virtual/workqueue/$WORKQUEUE/cpumask and
the new /sys/devices/virtual/workqueue/cpumask file.
This patch implements the basic infrastructure and the read interface.
wq_unbound_cpumask is initially set to cpu_possible_mask.
Cc: Christoph Lameter <cl@linux.com>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Mike Galbraith <bitbucket@online.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Current apply_workqueue_attrs() includes pwqs-allocation and pwqs-installation,
so when we batch multiple apply_workqueue_attrs()s as a transaction, we can't
ensure the transaction must succeed or fail as a complete unit.
To solve this, we split apply_workqueue_attrs() into three stages.
The first stage does the preparation: allocation memory, pwqs.
The second stage does the attrs-installaion and pwqs-installation.
The third stage frees the allocated memory and (old or unused) pwqs.
As the result, batching multiple apply_workqueue_attrs()s can
succeed or fail as a complete unit:
1) batch do all the first stage for all the workqueues
2) only commit all when all the above succeed.
This patch is a preparation for the next patch ("Allow modifying low level
unbound workqueue cpumask") which will do a multiple apply_workqueue_attrs().
The patch doesn't have functionality changed except two minor adjustment:
1) free_unbound_pwq() for the error path is removed, we use the
heavier version put_pwq_unlocked() instead since the error path
is rare. this adjustment simplifies the code.
2) the memory-allocation is also moved into wq_pool_mutex.
this is needed to avoid to do the further splitting.
tj: minor updates to comments.
Suggested-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Mike Galbraith <bitbucket@online.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The sysfs code usually belongs to the botom of the file since it deals
with high level objects. In the workqueue code it's misplaced and such
that we'll need to work around functions references to allow the sysfs
code to call APIs like apply_workqueue_attrs().
Lets move that block further in the file, almost the botom.
And declare workqueue_sysfs_unregister() just before destroy_workqueue()
which reference it.
tj: Moved workqueue_sysfs_unregister() forward declaration where other
forward declarations are.
Suggested-by: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Mike Galbraith <bitbucket@online.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Workqueues are used extensively throughout the kernel but sometimes
it's difficult to debug stalls involving work items because visibility
into its inner workings is fairly limited. Although sysrq-t task dump
annotates each active worker task with the information on the work
item being executed, it is challenging to find out which work items
are pending or delayed on which queues and how pools are being
managed.
This patch implements show_workqueue_state() which dumps all busy
workqueues and pools and is called from the sysrq-t handler. At the
end of sysrq-t dump, something like the following is printed.
Showing busy workqueues and worker pools:
...
workqueue filler_wq: flags=0x0
pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=2/256
in-flight: 491:filler_workfn, 507:filler_workfn
pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=2/256
in-flight: 501:filler_workfn
pending: filler_workfn
...
workqueue test_wq: flags=0x8
pwq 2: cpus=1 node=0 flags=0x0 nice=0 active=1/1
in-flight: 510(RESCUER):test_workfn BAR(69) BAR(500)
delayed: test_workfn1 BAR(492), test_workfn2
...
pool 0: cpus=0 node=0 flags=0x0 nice=0 workers=2 manager: 137
pool 2: cpus=1 node=0 flags=0x0 nice=0 workers=3 manager: 469
pool 3: cpus=1 node=0 flags=0x0 nice=-20 workers=2 idle: 16
pool 8: cpus=0-3 flags=0x4 nice=0 workers=2 manager: 62
The above shows that test_wq is executing test_workfn() on pid 510
which is the rescuer and also that there are two tasks 69 and 500
waiting for the work item to finish in flush_work(). As test_wq has
max_active of 1, there are two work items for test_workfn1() and
test_workfn2() which are delayed till the current work item is
finished. In addition, pid 492 is flushing test_workfn1().
The work item for test_workfn() is being executed on pwq of pool 2
which is the normal priority per-cpu pool for CPU 1. The pool has
three workers, two of which are executing filler_workfn() for
filler_wq and the last one is assuming the manager role trying to
create more workers.
This extra workqueue state dump will hopefully help chasing down hangs
involving workqueues.
v3: cpulist_pr_cont() replaced with "%*pbl" printf formatting.
v2: As suggested by Andrew, minor formatting change in pr_cont_work(),
printk()'s replaced with pr_info()'s, and cpumask printing now
uses cpulist_pr_cont().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
CC: Ingo Molnar <mingo@redhat.com>
Add wq_barrier->task and worker_pool->manager to keep track of the
flushing task and pool manager respectively. These are purely
informational and will be used to implement sysrq dump of workqueues.
Signed-off-by: Tejun Heo <tj@kernel.org>
The workqueues list is protected by wq_pool_mutex and a workqueue and
its subordinate data structures are freed directly on destruction. We
want to add the ability dump workqueues from a sysrq callback which
requires walking all workqueues without grabbing wq_pool_mutex. This
patch makes freeing of workqueues RCU protected and makes the
workqueues list walkable while holding RCU read lock.
Note that pool_workqueues and pools are already sched-RCU protected.
For consistency, workqueues are also protected with sched-RCU.
While at it, reverse the workqueues list so that a workqueue which is
created earlier comes before. The order of the list isn't significant
functionally but this makes the planned sysrq dump list system
workqueues first.
Signed-off-by: Tejun Heo <tj@kernel.org>
cancel[_delayed]_work_sync() are implemented using
__cancel_work_timer() which grabs the PENDING bit using
try_to_grab_pending() and then flushes the work item with PENDING set
to prevent the on-going execution of the work item from requeueing
itself.
try_to_grab_pending() can always grab PENDING bit without blocking
except when someone else is doing the above flushing during
cancelation. In that case, try_to_grab_pending() returns -ENOENT. In
this case, __cancel_work_timer() currently invokes flush_work(). The
assumption is that the completion of the work item is what the other
canceling task would be waiting for too and thus waiting for the same
condition and retrying should allow forward progress without excessive
busy looping
Unfortunately, this doesn't work if preemption is disabled or the
latter task has real time priority. Let's say task A just got woken
up from flush_work() by the completion of the target work item. If,
before task A starts executing, task B gets scheduled and invokes
__cancel_work_timer() on the same work item, its try_to_grab_pending()
will return -ENOENT as the work item is still being canceled by task A
and flush_work() will also immediately return false as the work item
is no longer executing. This puts task B in a busy loop possibly
preventing task A from executing and clearing the canceling state on
the work item leading to a hang.
task A task B worker
executing work
__cancel_work_timer()
try_to_grab_pending()
set work CANCELING
flush_work()
block for work completion
completion, wakes up A
__cancel_work_timer()
while (forever) {
try_to_grab_pending()
-ENOENT as work is being canceled
flush_work()
false as work is no longer executing
}
This patch removes the possible hang by updating __cancel_work_timer()
to explicitly wait for clearing of CANCELING rather than invoking
flush_work() after try_to_grab_pending() fails with -ENOENT.
Link: http://lkml.kernel.org/g/20150206171156.GA8942@axis.com
v3: bit_waitqueue() can't be used for work items defined in vmalloc
area. Switched to custom wake function which matches the target
work item and exclusive wait and wakeup.
v2: v1 used wake_up() on bit_waitqueue() which leads to NULL deref if
the target bit waitqueue has wait_bit_queue's on it. Use
DEFINE_WAIT_BIT() and __wake_up_bit() instead. Reported by Tomeu
Vizoso.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Rabin Vincent <rabin.vincent@axis.com>
Cc: Tomeu Vizoso <tomeu.vizoso@gmail.com>
Cc: stable@vger.kernel.org
Tested-by: Jesper Nilsson <jesper.nilsson@axis.com>
Tested-by: Rabin Vincent <rabin.vincent@axis.com>
printk and friends can now format bitmaps using '%*pb[l]'. cpumask
and nodemask also provide cpumask_pr_args() and nodemask_pr_args()
respectively which can be used to generate the two printf arguments
necessary to format the specified cpu/nodemask.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A worker_pool's forward progress is guaranteed by the fact that the
last idle worker assumes the manager role to create more workers and
summon the rescuers if creating workers doesn't succeed in timely
manner before proceeding to execute work items.
This manager role is implemented in manage_workers(), which indicates
whether the worker may proceed to work item execution with its return
value. This is necessary because multiple workers may contend for the
manager role, and, if there already is a manager, others should
proceed to work item execution.
Unfortunately, the function also indicates that the worker may proceed
to work item execution if need_to_create_worker() is false at the head
of the function. need_to_create_worker() tests the following
conditions.
pending work items && !nr_running && !nr_idle
The first and third conditions are protected by pool->lock and thus
won't change while holding pool->lock; however, nr_running can change
asynchronously as other workers block and resume and while it's likely
to be zero, as someone woke this worker up in the first place, some
other workers could have become runnable inbetween making it non-zero.
If this happens, manage_worker() could return false even with zero
nr_idle making the worker, the last idle one, proceed to execute work
items. If then all workers of the pool end up blocking on a resource
which can only be released by a work item which is pending on that
pool, the whole pool can deadlock as there's no one to create more
workers or summon the rescuers.
This patch fixes the problem by removing the early exit condition from
maybe_create_worker() and making manage_workers() return false iff
there's already another manager, which ensures that the last worker
doesn't start executing work items.
We can leave the early exit condition alone and just ignore the return
value but the only reason it was put there is because the
manage_workers() used to perform both creations and destructions of
workers and thus the function may be invoked while the pool is trying
to reduce the number of workers. Now that manage_workers() is called
only when more workers are needed, the only case this early exit
condition is triggered is rare race conditions rendering it pointless.
Tested with simulated workload and modified workqueue code which
trigger the pool deadlock reliably without this patch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Eric Sandeen <sandeen@sandeen.net>
Link: http://lkml.kernel.org/g/54B019F4.8030009@sandeen.net
Cc: Dave Chinner <david@fromorbit.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: stable@vger.kernel.org
When there is serious memory pressure, all workers in a pool could be
blocked, and a new thread cannot be created because it requires memory
allocation.
In this situation a WQ_MEM_RECLAIM workqueue will wake up the
rescuer thread to do some work.
The rescuer will only handle requests that are already on ->worklist.
If max_requests is 1, that means it will handle a single request.
The rescuer will be woken again in 100ms to handle another max_requests
requests.
I've seen a machine (running a 3.0 based "enterprise" kernel) with
thousands of requests queued for xfslogd, which has a max_requests of
1, and is needed for retiring all 'xfs' write requests. When one of
the worker pools gets into this state, it progresses extremely slowly
and possibly never recovers (only waited an hour or two).
With this patch we leave a pool_workqueue on mayday list
until it is clearly no longer in need of assistance. This allows
all requests to be handled in a timely fashion.
We keep each pool_workqueue on the mayday list until
need_to_create_worker() is false, and no work for this workqueue is
found in the pool.
I have tested this in combination with a (hackish) patch which forces
all work items to be handled by the rescuer thread. In that context
it significantly improves performance. A similar patch for a 3.0
kernel significantly improved performance on a heavy work load.
Thanks to Jan Kara for some design ideas, and to Dongsu Park for
some comments and testing.
tj: Inverted the lock order between wq_mayday_lock and pool->lock with
a preceding patch and simplified this patch. Added comment and
updated changelog accordingly. Dongsu spotted missing get_pwq()
in the simplified code.
Cc: Dongsu Park <dongsu.park@profitbricks.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, pool->lock nests inside pool->lock. There's no inherent
reason for this order. The only place where the two locks are held
together is pool_mayday_timeout() and it just got decided that way.
This nesting order turns out to complicate things with the planned
rescuer_thread() update. Let's invert them. This doesn't cause any
behavior differences.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Dongsu Park <dongsu.park@profitbricks.com>
rescuer_thread() caches &rescuer->scheduled in a local variable
scheduled for convenience. There's one WARN_ON_ONCE() which was using
&rescuer->scheduled directly. Replace it with the local variable.
This patch causes no functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Tidy up and use cond_resched_rcu_qs when calling cond_resched and
reporting potential quiescent state to RCU. Splitting this change in
this way allows easy backporting to -stable for kernel versions not
having cond_resched_rcu_qs().
Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Similar to the stop_machine deadlock scenario on !PREEMPT kernels
addressed in b22ce2785d "workqueue: cond_resched() after processing
each work item", kworker threads requeueing back-to-back with zero jiffy
delay can stall RCU. The cond_resched call introduced in that fix will
yield only iff there are other higher priority tasks to run, so force a
quiescent RCU state between work items.
Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com>
Link: https://lkml.kernel.org/r/20140926105227.01325697@jlaw-desktop.mno.stratus.com
Link: https://lkml.kernel.org/r/20140929115445.40221d8e@jlaw-desktop.mno.stratus.com
Fixes: b22ce2785d ("workqueue: cond_resched() after processing each work item")
Cc: <stable@vger.kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Pull percpu updates from Tejun Heo:
- Major reorganization of percpu header files which I think makes
things a lot more readable and logical than before.
- percpu-refcount is updated so that it requires explicit destruction
and can be reinitialized if necessary. This was pulled into the
block tree to replace the custom percpu refcnting implemented in
blk-mq.
- In the process, percpu and percpu-refcount got cleaned up a bit
* 'for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (21 commits)
percpu-refcount: implement percpu_ref_reinit() and percpu_ref_is_zero()
percpu-refcount: require percpu_ref to be exited explicitly
percpu-refcount: use unsigned long for pcpu_count pointer
percpu-refcount: add helpers for ->percpu_count accesses
percpu-refcount: one bit is enough for REF_STATUS
percpu-refcount, aio: use percpu_ref_cancel_init() in ioctx_alloc()
workqueue: stronger test in process_one_work()
workqueue: clear POOL_DISASSOCIATED in rebind_workers()
percpu: Use ALIGN macro instead of hand coding alignment calculation
percpu: invoke __verify_pcpu_ptr() from the generic part of accessors and operations
percpu: preffity percpu header files
percpu: use raw_cpu_*() to define __this_cpu_*()
percpu: reorder macros in percpu header files
percpu: move {raw|this}_cpu_*() definitions to include/linux/percpu-defs.h
percpu: move generic {raw|this}_cpu_*_N() definitions to include/asm-generic/percpu.h
percpu: only allow sized arch overrides for {raw|this}_cpu_*() ops
percpu: reorganize include/linux/percpu-defs.h
percpu: move accessors from include/linux/percpu.h to percpu-defs.h
percpu: include/asm-generic/percpu.h should contain only arch-overridable parts
percpu: introduce arch_raw_cpu_ptr()
...
Pull workqueue updates from Tejun Heo:
"Lai has been doing a lot of cleanups of workqueue and kthread_work.
No significant behavior change. Just a lot of cleanups all over the
place. Some are a bit invasive but overall nothing too dangerous"
* 'for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
kthread_work: remove the unused wait_queue_head
kthread_work: wake up worker only when the worker is idle
workqueue: use nr_node_ids instead of wq_numa_tbl_len
workqueue: remove the misnamed out_unlock label in get_unbound_pool()
workqueue: remove the stale comment in pwq_unbound_release_workfn()
workqueue: move rescuer pool detachment to the end
workqueue: unfold start_worker() into create_worker()
workqueue: remove @wakeup from worker_set_flags()
workqueue: remove an unneeded UNBOUND test before waking up the next worker
workqueue: wake regular worker if need_more_worker() when rescuer leave the pool
workqueue: alloc struct worker on its local node
workqueue: reuse the already calculated pwq in try_to_grab_pending()
workqueue: stronger test in process_one_work()
workqueue: clear POOL_DISASSOCIATED in rebind_workers()
workqueue: sanity check pool->cpu in wq_worker_sleeping()
workqueue: clear leftover flags when detached
workqueue: remove useless WARN_ON_ONCE()
workqueue: use schedule_timeout_interruptible() instead of open code
workqueue: remove the empty check in too_many_workers()
workqueue: use "pool->cpu < 0" to stand for an unbound pool
They are the same and nr_node_ids is provided by the memory subsystem.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
After the locking was moved up to the caller of the get_unbound_pool(),
out_unlock label doesn't need to do any unlock operation and the name
became bad, so we just remove this label, and the only usage-site
"goto out_unlock" is subsituted to "return pool".
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
In 75ccf5950f ("workqueue: prepare flush_workqueue() for dynamic
creation and destrucion of unbound pool_workqueues"), a comment
about the synchronization for the pwq in pwq_unbound_release_workfn()
was added. The comment claimed the flush_mutex wasn't strictly
necessary, it was correct in that time, due to the pwq was protected
by workqueue_lock.
But it is incorrect now since the wq->flush_mutex was renamed to
wq->mutex and workqueue_lock was removed, the wq->mutex is strictly
needed. But the comment was miss-updated when the synchronization
was changed.
This patch removes the incorrect comments and doesn't add any new
comment to explain why wq->mutex is needed here, which is definitely
obvious and wq->pwqs_node has "WQ" notation in its definition which is
better comment.
The old commit mentioned above also introduced a comment in link_pwq()
about the synchronization. This comment is also removed in this patch
since the whole link_pwq() is proteced by wq->mutex.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
In 51697d3939 ("workqueue: use generic attach/detach routine for
rescuers"), The rescuer detaches itself from the pool before put_pwq()
so that the put_unbound_pool() will not destroy the rescuer-attached
pool.
It is unnecessary. worker_detach_from_pool() can be used as the last
statement to access to the pool just like the regular workers,
put_unbound_pool() will wait for it to detach and then free the pool.
So we move the worker_detach_from_pool() down, make it coincide with
the regular workers.
tj: Minor description update.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Simply unfold the code of start_worker() into create_worker() and
remove the original start_worker() and create_and_start_worker().
The only trade-off is the introduced overhead that the pool->lock
is released and regrabbed after the newly worker is started.
The overhead is acceptible since the manager is slow path.
And because this new locking behavior, the newly created worker
may grab the lock earlier than the manager and go to process
work items. In this case, the recheck need_to_create_worker() may be
true as expected and the manager goes to restart which is the
correct behavior.
tj: Minor updates to description and comments.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Tejun Heo