Commit Graph

442231 Commits

Author SHA1 Message Date
Laurent Pinchart f17388cc29 usb: gadget: uvc: Set the V4L2 buffer field to V4L2_FIELD_NONE
The UVC gadget driver doesn't support interlaced video but left the
buffer field uninitialized. Set it to V4L2_FIELD_NONE.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-15 11:07:52 -05:00
Laurent Pinchart 16bf900f50 usb: gadget: uvc: Switch to monotonic clock for buffer timestamps
The wall time clock isn't useful for applications as it can jump around
due to time adjustement. Switch to the monotonic clock.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-15 11:07:47 -05:00
Liviu Dudau 79cb5b533a usb: phy: Add SMSC USB334x PHY ID
adding new device id for SMSC USB334x devices.

Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-15 10:31:57 -05:00
Andrzej Pietrasiewicz 1ade5d7e17 usb: gadget: f_uac2: don't queue new requests when shutting down
In some circumstances when g_audio is being unloaded there happens
an endless loop in udc driver. It has happend on a board with
s3c-hsotg. If there are requests in endpoint's queue, they are completed
in a loop. But completing them might cause appending new requests
to the queue. This patch causes agdev_iso_complete() to return immediately
if request's status is -ESHUTDOWN. If it does not return immediately,
then although the current request is removed from the queue, a new one
is appended to the queue, so the above mentioned loop cannot end.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-15 10:30:31 -05:00
Andy Shevchenko f1c7e71081 usb: dwc3: convert to pcim_enable_device()
This fixes a bug when dwc3_pci_register_phys() fails and leaves device enabled.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-15 10:26:38 -05:00
Andy Shevchenko b09e99ee7c usb: dwc3: no need to initialize ret variable
First usage of ret variable will re-write initial value. Thus, there is no need
to initialize it.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-15 10:26:21 -05:00
Andrzej Pietrasiewicz 7419485f19 usb: gadget: configfs: OS Extended Properties descriptors support
Add handling of OS Extended Properties descriptors from configfs interface.
One kind of "OS Descriptors" are "Extended Properties" descriptors, which
need to be specified per interface or per group of interfaces described
by an IAD. This patch adds support for creating subdirectories
in interface.<n> directory located in the function's directory.
Names of subdirectories created become names of properties.
Each property contains two attributes: "type" and "data".
The type can be a numeric value 1..7 while data is a blob interpreted
depending on the type specified.
The types are:
1 - unicode string
2 - unicode string with environment variables
3 - binary
4 - little-endian 32-bit
5 - big-endian 32-bit
6 - unicode string with a symbolic link
7 - multiple unicode strings

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-14 09:39:51 -05:00
Andrzej Pietrasiewicz a747b0958b usb: gadget: f_rndis: OS Descriptors configfs support
Added handling of OS Descriptors support for f_rndis.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-14 09:39:36 -05:00
Andrzej Pietrasiewicz da4243145f usb: gadget: configfs: OS Extended Compatibility descriptors support
Add handling of OS Extended Compatibility descriptors from configfs interface.
Hosts which expect the "OS Descriptors" ask only for configurations @ index 0,
but linux-based USB devices can provide more than one configuration.
This patch adds marking one of gadget's configurations the configuration
to be reported at index 0, regardless of the actual sequence of usb_add_config
invocations used for adding the configurations. The configuration is selected
by creating a symbolic link pointing to it from the "os_desc" directory
located at the top of a gadget's directory hierarchy.

One kind of "OS Descriptors" are "Extended Compatibility Descriptors",
which need to be specified per interface. This patch adds interface.<n>
directory in function's configfs directory to represent each interface
defined by the function. Each interface's directory contains two attributes:
"compatible_id" and "sub_compatible_id", which represent 8-byte
strings to be reported to the host as the "Compatible ID" and "Sub Compatible
ID".

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-14 09:39:25 -05:00
Andrzej Pietrasiewicz 87213d388e usb: gadget: configfs: OS String support
Add handling of OS String extension from the configfs interface.
A directory "os_desc" is added at the top level of a gadget's
directories hierarchy. In the "os_desc" directory there are
three attributes: "use", "b_vendor_code" and "qw_sign".
If "use" contains "0" the OS string is not reported to the host.
"b_vendor_code" contains a one-byte value which is used
for custom per-device and per-interface requests.
"qw_sign" contains an identifier to be reported as the "OS String"
proper.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-14 09:39:14 -05:00
Andrzej Pietrasiewicz de7a8d2d53 usb: gadget: f_rndis: OS descriptors support
In order for usb functions to expose OS descriptors they
need to be made aware of OS descriptors. This involves
extending the "options" structure and setting up
appropriate associations.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-14 09:38:58 -05:00
Andrzej Pietrasiewicz 37a3a53342 usb: gadget: OS Feature Descriptors support
There is a custom (non-USB IF) extension to the USB standard:

http://msdn.microsoft.com/library/windows/hardware/gg463182

They grant permission to use the specification - there is
"Microsoft OS Descriptor Specification License Agreement"
under the link mentioned above, and its Section 2 "Grant
of License", letter (b) reads:

"Patent license. Microsoft hereby grants to You a nonexclusive,
royalty-free, nontransferable, worldwide license under Microsoft’s
patents embodied solely within the Specification and that are owned
or licensable by Microsoft to make, use, import, offer to sell,
sell and distribute directly or indirectly to Your Licensees Your
Implementation. You may sublicense this patent license to Your
Licensees under the same terms and conditions."

The said extension is maintained by Microsoft for Microsoft.

Yet it is fairly common for various devices to use it, and a
popular proprietary operating system expects devices to provide
"OS descriptors", so Linux-based USB gadgets whishing to be able
to talk to a variety of operating systems should be able to provide
the "OS descriptors".

This patch adds optional support for gadgets whishing to expose
the so called "OS Feature Descriptors", that is "Extended Compatibility ID"
and "Extended Properties".

Hosts which do request "OS descriptors" from gadgets do so during
the enumeration phase and before the configuration is set with
SET_CONFIGURATION. What is more, those hosts never ask for configurations
at indices other than 0. Therefore, gadgets whishing to provide
"OS descriptors" must designate one configuration to be used with
this kind of hosts - this is what os_desc_config is added for in
struct usb_composite_dev. There is an additional advantage to it:
if a gadget provides "OS descriptors" and designates one configuration
to be used with such non-USB-compliant hosts it can invoke
"usb_add_config" in any order because the designated configuration
will be reported to be at index 0 anyway.

This patch also adds handling vendor-specific requests addressed
at device or interface and related to handling "OS descriptors".

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-14 09:38:16 -05:00
Andrzej Pietrasiewicz 19824d5eee usb: gadget: OS String support
There is a custom (non-USB IF) extension to the USB standard:

http://msdn.microsoft.com/library/windows/hardware/gg463182

They grant permission to use the specification - there is
"Microsoft OS Descriptor Specification License Agreement"
under the link mentioned above, and its Section 2 "Grant
of License", letter (b) reads:

"Patent license. Microsoft hereby grants to You a nonexclusive,
royalty-free, nontransferable, worldwide license under Microsoft’s
patents embodied solely within the Specification and that are owned
or licensable by Microsoft to make, use, import, offer to sell,
sell and distribute directly or indirectly to Your Licensees Your
Implementation. You may sublicense this patent license to Your
Licensees under the same terms and conditions."

The said extension is maintained by Microsoft for Microsoft.

Yet it is fairly common for various devices to use it, and a
popular proprietary operating system expects devices to provide
"OS descriptors", so Linux-based USB gadgets whishing to be able
to talk to a variety of operating systems should be able to provide
the "OS descriptors".

This patch adds optional support for gadgets whishing to expose
the so called "OS String" under index 0xEE of language 0.
The contents of the string is generated based on the qw_sign
array and b_vendor_code.

Interested gadgets need to set the cdev->use_os_string flag,
fill cdev->qw_sign with appropriate values and fill cdev->b_vendor_code
with a value of their choice.

This patch does not however implement responding to any vendor-specific
USB requests.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-14 09:38:03 -05:00
Andrzej Pietrasiewicz 74d4846697 usb: gadget: FunctionFS: share VLA macros with all usb gadget files
Variable Length Array macros allow portable (compilable with both gcc
and clang) way of allocating a number of structures using a single
memory chunk. They can be useful for files other than f_fs.c,
so move them to a header file.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-14 09:37:27 -05:00
Dan Carpenter 10f0577aa5 usb: phy: msm: change devm_ioremap() to devm_ioremap_resource()
There are several issues here:
1) platform_get_resource() can return NULL and that wasn't handled.
2) We should request the memory before we remap it, and
   devm_ioremap_resource() does that.
3) devm_ioremap() returns a NULL but we were checking for IS_ERR().

Fixes: 6b99c68ec1 ('usb: phy: msm: Migrate to Managed Device Resource allocation')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-14 09:25:51 -05:00
Arnd Bergmann c5ab571f81 usb: phy: msm: reset controller is mandatory now
Commit a273454341 "usb: phy: msm: Use reset framework for LINK
and PHY resets" introduced a mandatory call to reset_control_get
into the msm usb phy driver, which means we have to add a Kconfig
dependency on the API to avoid this build error:

phy/phy-msm-usb.c: In function 'msm_otg_read_dt':
phy/phy-msm-usb.c:1461:2: error: implicit declaration of function 'devm_reset_control_get' [-Werror=implicit-function-declaration]
  motg->link_rst = devm_reset_control_get(&pdev->dev, "link");
  ^

Since the usb-ehci-msm driver currently selects the OTG driver,
we could still get a broken dependency here. To solve that,
this patch also removes the 'select', which turns out to be
unnecessary.

Reviewed-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-14 09:25:47 -05:00
Arnd Bergmann a8d191c8bb usb: musb: omap2plus bus glue needs USB host support
The musb/omap2430.c bus glue driver calls usb_hcd_poll_rh_status,
which is only available if CONFIG_USB is also set, i.e. we
are building USB host mode and not just endpoint mode.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-14 09:23:32 -05:00
Arnd Bergmann 70c1ff4b3c usb: musb: tusb-dma can't be built-in if tusb is not
A configuration with CONFIG_USB_MUSB_HDRC=y, CONFIG_USB_TUSB_OMAP_DMA=y
and CONFIG_USB_MUSB_TUSB6010=m causes a link failure because of the
dependency on the tusb_get_revision symbol:

(.text+0x154ce8): undefined reference to `tusb_get_revision'

This patch ensures that either MUSB_HDRC and MUSB_TUSB6010 are
both modules or both built-in, which are the valid configurations.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-14 09:23:31 -05:00
Arnd Bergmann 64890edb85 usb: gadget: s3c2410_udc: don't use pr_debug return value
pr_debug() may be defined as "do { } while (0)" in some configurations,
which means one cannot rely on the return value to be available.

In the dprintk function in this driver, we can work around the
resulting build error trivially by returning the length that
this function already knows and ignoring the return value of
pr_debug.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-14 09:23:31 -05:00
Alexey Khoroshilov 966036fde6 usb: gadget: gr_udc: unconditionally use GFP_ATOMIC in gr_queue_ext()
As far as gr_queue() is called with spinlock held,
we have to pass GFP_ATOMIC regardless of gfp argument.

Found by Linux Driver Verification project (linuxtesting.org).

Acked-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-14 09:23:30 -05:00
Jingoo Han f06d186dbd usb: gadget: tcm_usb_gadget: remove unnecessary OOM messages
The site-specific OOM messages are unnecessary, because they
duplicate the MM subsystem generic OOM message.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-14 09:23:30 -05:00
Jingoo Han e5f06f909f usb: gadget: r8a66597-udc: remove unnecessary OOM messages
The site-specific OOM messages are unnecessary, because they
duplicate the MM subsystem generic OOM message.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-14 09:23:29 -05:00
Jingoo Han f3772c2b49 usb: gadget: mv_u3d_core: remove unnecessary OOM messages
The site-specific OOM messages are unnecessary, because they
duplicate the MM subsystem generic OOM message.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-14 09:23:29 -05:00
Jingoo Han c797f7fd5c usb: gadget: m66592-udc: remove unnecessary OOM messages
The site-specific OOM messages are unnecessary, because they
duplicate the MM subsystem generic OOM message.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-14 09:23:29 -05:00
Jingoo Han 8a24bb4039 usb: gadget: fusb300_udc: remove unnecessary OOM messages
The site-specific OOM messages are unnecessary, because they
duplicate the MM subsystem generic OOM message.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-14 09:23:28 -05:00
Jingoo Han 8a67ab7d1d usb: gadget: fsl_udc_core: remove unnecessary OOM messages
The site-specific OOM messages are unnecessary, because they
duplicate the MM subsystem generic OOM message.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-14 09:23:28 -05:00
Jingoo Han 0351c329f7 usb: gadget: fotg210-udc: remove unnecessary OOM messages
The site-specific OOM messages are unnecessary, because they
duplicate the MM subsystem generic OOM message.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-14 09:23:27 -05:00
Jingoo Han d48d41f18a usb: gadget: f_uac2: remove unnecessary OOM messages
The site-specific OOM messages are unnecessary, because they
duplicate the MM subsystem generic OOM message.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-14 09:23:27 -05:00
Alexandre Belloni bcdbc084eb usb: gadget: atmel_usba: always test udc->driver
Found using smatch: drivers/usb/gadget/atmel_usba_udc.c:1689 usba_udc_irq()
error: we previously assumed 'udc->driver' could be null (see line 1636)

Always test udc->driver before using its members.

Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-14 09:23:26 -05:00
Peter Chen 4d9f872ced usb: gadget: configfs: fix typo
%s/atleast/at least

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-14 09:23:26 -05:00
Paul Bolle 22a825079a usb: musb: tusb: remove dead code
musb_in_tusb() is always set to 0, because CONFIG_USB_TUSB6010 is never
set (it should have been CONFIG_USB_MUSB_TUSB6010). But musb_in_tusb()
is unused anyway, so remove a few lines of dead code.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-14 09:23:25 -05:00
George Cherian 411dd19c68 usb: musb: Kconfig: Select the DMA driver if DMA mode of MUSB is enabled
AM335x MUSB supports both PIO and DMA mode. When DMA mode is
selected users need to explicitly enable the DMA driver. To avoid the
extra configuration select the DMA driver if DMA mode is set for AM335x MUSB.

Signed-off-by: George Cherian <george.cherian@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-14 09:23:25 -05:00
Robert Baldyga b34e08d5c7 tools: usb: aio example applications
This patch adds two example applications showing usage of Asynchronous I/O API
of FunctionFS. First one (aio_simple) is simple example of bidirectional data
transfer. Second one (aio_multibuff) shows multi-buffer data transfer, which
may to be used in high performance applications.

Both examples contains userspace applications for device and for host.
It needs libaio library on the device, and libusb library on host.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-14 09:23:24 -05:00
Maxime Ripard eadd431239 phy: usb: sunxi: Introduce Allwinner A31 USB PHY support
The USB phy controller in the A31 differs mostly from the older controllers
because it has a clock dedicated for each phy, while the older ones were having
a single clock for all the phys.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-05-14 19:41:13 +05:30
Maxime Ripard fecc2d785b Documentation: dt: Add new compatible for the A31 USB Phy
Document the freshly introduced compatible for the USB phy in use in the
Allwinner A31 SoC.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-05-14 19:41:13 +05:30
Maxime Ripard 2a7f9982d6 phy: sunxi: Rework phy initialization
Move the phy initialization and variables declaration to the loop itself, since
it is where it really belongs. Also remove all the temporary variables, we can
use the structure members directly.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-05-14 19:41:13 +05:30
Vivek Gautam 4fc8a4e65f phy: exynos5-usbdrd: Add facility for VBUS supply
Adding support to enable/disable VBUS controlled by a
regulator, to enable vbus supply on the port.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-05-13 18:07:08 +05:30
Vivek Gautam 59025887fb phy: Add new Exynos5 USB 3.0 PHY driver
Add a new driver for the USB 3.0 PHY on Exynos5 series of SoCs.
The new driver uses the generic PHY framework and will interact
with DWC3 controller present on Exynos5 series of SoCs.

Also, created a new header file in linux/mfd/syscon/ for
Exynos5 SoCs and put the required PMU offset definitions
for the basic available PHYs.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-05-13 18:07:08 +05:30
Vivek Gautam 9e552a04fd Documentation: Document Exynos5 USB 3.0 DRD PHY
Add necessary binding documentation for USB 3.0 DRD PHY present on
Exynos5 SoC series.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-05-13 18:07:08 +05:30
Apelete Seketeli 60b6dbeffb documentation: docbook: document process of writing an musb glue layer
Document the process of writing an musb glue layer by taking the
Ingenic JZ4740 glue layer as an example, as it seems more simple than
most glue layers due to the basic feature set of the JZ4740 USB device
controller.

Signed-off-by: Apelete Seketeli <apelete@seketeli.net>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-12 12:34:47 -05:00
Peter Chen b5fb8d0a40 usb: udc-core: set gadget state as not attached after unloading module
Set gadget state as "not attached" after unloading gadget module, or
its state will be unchanged after we unload gadget module.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-12 12:34:47 -05:00
Peter Chen 6027f3173e usb: gadget: set gadget state as configured
Set gadget device state as configurated after set configuration
has finished.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-12 12:34:46 -05:00
Felipe Balbi 1f7fc40876 usb: phy: msm: enable build on other architectures
By adding COMPILE_TEST to the list of dependencies
we can build test this driver on all other architectures
which is very valuable for maintainers applying patches
and to find silly mistakes during development.

Reviewed-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-12 12:34:46 -05:00
Felipe Balbi 245974908c usb: phy: msm: switch over to writel()
Remove that single instance of writel_relaxed()
call which is only available on ARM architecture.

This will let us build test this driver on all
different architectures.

Reviewed-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-12 12:34:45 -05:00
Felipe Balbi b3025e6ada usb: phy: msm: cast to enum msm_usb_phy_type
this solves the following build warning found when
running compile tests.

drivers/usb/phy/phy-msm-usb.c: In function ‘msm_otg_read_dt’:
drivers/usb/phy/phy-msm-usb.c:1459:20: warning: cast from pointer \
	to integer of different size [-Wpointer-to-int-cast]
  pdata->phy_type = (int) id->data;
                    ^
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-05-12 12:34:23 -05:00
Arnd Bergmann 3fc03f3d72 phy: kona2: use 'select GENERIC_PHY' in Kconfig
All other phy drivers use 'select', while this one is
the only one to use 'depends on'. This is not a bug, just
slightly inconsistent, so let's change it to do things the
same way as everyone else.

We may also want to turn GENERIC_PHY into a silent option
that only ever gets turned on if another driver needs it.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Matt Porter <mporter@linaro.org>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-05-12 19:02:02 +05:30
Antoine Ténart 98c3b32229 phy: exynos-mipi-video: fix check on array index
The phys array is of size EXYNOS_MIPI_PHYS_NUM. Trying to access the
index EXYNOS_MIPI_PHYS_NUM should return an error.

Fixes: 069d2e26e9 "phy: Add driver for Exynos MIPI CSIS/DSIM DPHYs"

Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-05-12 19:02:02 +05:30
Linus Torvalds d6d211db37 Linux 3.15-rc5 2014-05-09 13:10:52 -07:00
Linus Torvalds 181da3c34a Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Peter Anvin:
 "A somewhat unpleasantly large collection of small fixes.  The big ones
  are the __visible tree sweep and a fix for 'earlyprintk=efi,keep'.  It
  was using __init functions with predictably suboptimal results.

  Another key fix is a build fix which would produce output that simply
  would not decompress correctly in some configuration, due to the
  existing Makefiles picking up an unfortunate local label and mistaking
  it for the global symbol _end.

  Additional fixes include the handling of 64-bit numbers when setting
  the vdso data page (a latent bug which became manifest when i386
  started exporting a vdso with time functions), a fix to the new MSR
  manipulation accessors which would cause features to not get properly
  unblocked, a build fix for 32-bit userland, and a few new platform
  quirks"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, vdso, time: Cast tv_nsec to u64 for proper shifting in update_vsyscall()
  x86: Fix typo in MSR_IA32_MISC_ENABLE_LIMIT_CPUID macro
  x86: Fix typo preventing msr_set/clear_bit from having an effect
  x86/intel: Add quirk to disable HPET for the Baytrail platform
  x86/hpet: Make boot_hpet_disable extern
  x86-64, build: Fix stack protector Makefile breakage with 32-bit userland
  x86/reboot: Add reboot quirk for Certec BPC600
  asmlinkage: Add explicit __visible to drivers/*, lib/*, kernel/*
  asmlinkage, x86: Add explicit __visible to arch/x86/*
  asmlinkage: Revert "lto: Make asmlinkage __visible"
  x86, build: Don't get confused by local symbols
  x86/efi: earlyprintk=efi,keep fix
2014-05-09 12:24:20 -07:00
Boris Ostrovsky 28b92e09e2 x86, vdso, time: Cast tv_nsec to u64 for proper shifting in update_vsyscall()
With tk->wall_to_monotonic.tv_nsec being a 32-bit value on 32-bit
systems, (tk->wall_to_monotonic.tv_nsec << tk->shift) in update_vsyscall()
may lose upper bits or, worse, add them since compiler will do this:
	(u64)(tk->wall_to_monotonic.tv_nsec << tk->shift)
instead of
	((u64)tk->wall_to_monotonic.tv_nsec << tk->shift)

So if, for example, tv_nsec is 0x800000 and shift is 8 we will end up
with 0xffffffff80000000 instead of 0x80000000. And then we are stuck in
the subsequent 'while' loop.

We need an explicit cast.

Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: http://lkml.kernel.org/r/1399648287-15178-1-git-send-email-boris.ostrovsky@oracle.com
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: <stable@vger.kernel.org> # v3.14
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2014-05-09 08:45:52 -07:00