For being able to relocate pre-allocated data areas like initrd or
p2m list it is mandatory to find a contiguous memory area which is
not yet in use and doesn't conflict with the memory map we want to
be in effect.
In case such an area is found reserve it at once as this will be
required to be done in any case.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Provide a service routine to check a physical memory area against the
E820 map. The routine will return false if the complete area is RAM
according to the E820 map and true otherwise.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
- Revert a fix from 4.2-rc5 that was causing lots of WARNING spam.
- Fix a memory leak affecting backends in HVM guests.
- Fix PV domU hang with certain configurations.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVzHsAAAoJEFxbo/MsZsTR9Y0H/2j1PHt29RPcNdgGQ84AH0Wh
tw1emL8rMcdhWQnsO7bNmywNNvRNQnU3ZJ8dzoq+5GPikNsbfQzYc7U2pIL4A+gB
AAJsNDNzecuq4srk8vNxcmZ7ySvm9w6dccDUex2ge3sNWaq6gzSQvz6FSWiL0Sxg
k3JcnemEg6JrYOTWdxKInAORMcRO6rgx9eIsdPUPOpgC5XLg6/mZOqBAWXIksDvs
V9uCMqQicaUgBgKFIOSllqH6fcCNooRu3aDwNNj/2mMcJmEvMeBkHmNlQgEm2j5L
ubdDyrC5y48TUPJm8i3+W2/AY+kgWzhThcqyVy6LRAAj5RItJFxMf0nMXzIEqlQ=
=UgMy
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.2-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen bug fixes from David Vrabel:
- revert a fix from 4.2-rc5 that was causing lots of WARNING spam.
- fix a memory leak affecting backends in HVM guests.
- fix PV domU hang with certain configurations.
* tag 'for-linus-4.2-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/xenbus: Don't leak memory when unmapping the ring on HVM backend
Revert "xen/events/fifo: Handle linked events when closing a port"
x86/xen: build "Xen PV" APIC driver for domU as well
It turns out that a PV domU also requires the "Xen PV" APIC
driver. Otherwise, the flat driver is used and we get stuck in busy
loops that never exit, such as in this stack trace:
(gdb) target remote localhost:9999
Remote debugging using localhost:9999
__xapic_wait_icr_idle () at ./arch/x86/include/asm/ipi.h:56
56 while (native_apic_mem_read(APIC_ICR) & APIC_ICR_BUSY)
(gdb) bt
#0 __xapic_wait_icr_idle () at ./arch/x86/include/asm/ipi.h:56
#1 __default_send_IPI_shortcut (shortcut=<optimized out>,
dest=<optimized out>, vector=<optimized out>) at
./arch/x86/include/asm/ipi.h:75
#2 apic_send_IPI_self (vector=246) at arch/x86/kernel/apic/probe_64.c:54
#3 0xffffffff81011336 in arch_irq_work_raise () at
arch/x86/kernel/irq_work.c:47
#4 0xffffffff8114990c in irq_work_queue (work=0xffff88000fc0e400) at
kernel/irq_work.c:100
#5 0xffffffff8110c29d in wake_up_klogd () at kernel/printk/printk.c:2633
#6 0xffffffff8110ca60 in vprintk_emit (facility=0, level=<optimized
out>, dict=0x0 <irq_stack_union>, dictlen=<optimized out>,
fmt=<optimized out>, args=<optimized out>)
at kernel/printk/printk.c:1778
#7 0xffffffff816010c8 in printk (fmt=<optimized out>) at
kernel/printk/printk.c:1868
#8 0xffffffffc00013ea in ?? ()
#9 0x0000000000000000 in ?? ()
Mailing-list-thread: https://lkml.org/lkml/2015/8/4/755
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
We don't use irq_enable_sysexit on 64-bit kernels any more.
Remove all the paravirt and Xen machinery to support it on
64-bit kernels.
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/8a03355698fe5b94194e9e7360f19f91c1b2cf1f.1428100853.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Remove extern declarations in arch/x86/xen/setup.c which are either
not used or redundant. Move needed other extern declarations to
xen-ops.h
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
- Linear p2m for x86 PV guests which simplifies the p2m code, improves
performance and will allow for > 512 GB PV guests in the future.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJUjx7OAAoJEFxbo/MsZsTRXLIH/ishF/xDCL6F5r0I0SKDuaz5
C/BediDcFzbzh4/t3x2PrPooHk4gPmeyIg688ZGgBAxHRXC5OJ2U5tdtZ/qUCnwf
0J1pdp/yoAOVRJT+Sax10lN4+G8YV7+6Ptikz0C7glXBAg8SgFL3Y6tfBS0jNwYR
wQph09S9n7gMZTodSBLbb0ymtJMhl16DrETJsYV73sU7bAL5sFDVkMQvY3SxkusX
GNFeALfqM0cSK9mDI6O9avGJKoIdKlzt7VWHdlc+yKTlQsoyg/cSH3AaihhG6af9
IElRxwH9Z40VFLKip0gNMOIrUwAjFGSw6N+Uhik27tlmvfI3Dll/+gsMz/5sHc8=
=OyoK
-----END PGP SIGNATURE-----
Merge tag 'stable/for-linus-3.19-rc0b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull additional xen update from David Vrabel:
"Xen: additional features for 3.19-rc0
- Linear p2m for x86 PV guests which simplifies the p2m code,
improves performance and will allow for > 512 GB PV guests in the
future.
A last-minute, configuration specific issue was discovered with this
change which is why it was not included in my previous pull request.
This is now been fixed and tested"
* tag 'stable/for-linus-3.19-rc0b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: switch to post-init routines in xen mmu.c earlier
Revert "swiotlb-xen: pass dev_addr to swiotlb_tbl_unmap_single"
xen: annotate xen_set_identity_and_remap_chunk() with __init
xen: introduce helper functions to do safe read and write accesses
xen: Speed up set_phys_to_machine() by using read-only mappings
xen: switch to linear virtual mapped sparse p2m list
xen: Hide get_phys_to_machine() to be able to tune common path
x86: Introduce function to get pmd entry pointer
xen: Delay invalidating extra memory
xen: Delay m2p_override initialization
xen: Delay remapping memory of pv-domain
xen: use common page allocation function in p2m.c
xen: Make functions static
xen: fix some style issues in p2m.c
At start of the day the Xen hypervisor presents a contiguous mfn list
to a pv-domain. In order to support sparse memory this mfn list is
accessed via a three level p2m tree built early in the boot process.
Whenever the system needs the mfn associated with a pfn this tree is
used to find the mfn.
Instead of using a software walked tree for accessing a specific mfn
list entry this patch is creating a virtual address area for the
entire possible mfn list including memory holes. The holes are
covered by mapping a pre-defined page consisting only of "invalid
mfn" entries. Access to a mfn entry is possible by just using the
virtual base address of the mfn list and the pfn as index into that
list. This speeds up the (hot) path of determining the mfn of a
pfn.
Kernel build on a Dell Latitude E6440 (2 cores, HT) in 64 bit Dom0
showed following improvements:
Elapsed time: 32:50 -> 32:35
System: 18:07 -> 17:47
User: 104:00 -> 103:30
Tested with following configurations:
- 64 bit dom0, 8GB RAM
- 64 bit dom0, 128 GB RAM, PCI-area above 4 GB
- 32 bit domU, 512 MB, 8 GB, 43 GB (more wouldn't work even without
the patch)
- 32 bit domU, ballooning up and down
- 32 bit domU, save and restore
- 32 bit domU with PCI passthrough
- 64 bit domU, 8 GB, 2049 MB, 5000 MB
- 64 bit domU, ballooning up and down
- 64 bit domU, save and restore
- 64 bit domU with PCI passthrough
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
When the physical memory configuration is initialized the p2m entries
for not pouplated memory pages are set to "invalid". As those pages
are beyond the hypervisor built p2m list the p2m tree has to be
extended.
This patch delays processing the extra memory related p2m entries
during the boot process until some more basic memory management
functions are callable. This removes the need to create new p2m
entries until virtual memory management is available.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Early in the boot process the memory layout of a pv-domain is changed
to match the E820 map (either the host one for Dom0 or the Xen one)
regarding placement of RAM and PCI holes. This requires removing memory
pages initially located at positions not suitable for RAM and adding
them later at higher addresses where no restrictions apply.
To be able to operate on the hypervisor supported p2m list until a
virtual mapped linear p2m list can be constructed, remapping must
be delayed until virtual memory management is initialized, as the
initial p2m list can't be extended unlimited at physical memory
initialization time due to it's fixed structure.
A further advantage is the reduction in complexity and code volume as
we don't have to be careful regarding memory restrictions during p2m
updates.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Pull EFI changes from Ingo Molnar:
"Main changes in this cycle are:
- arm64 efi stub fixes, preservation of FP/SIMD registers across
firmware calls, and conversion of the EFI stub code into a static
library - Ard Biesheuvel
- Xen EFI support - Daniel Kiper
- Support for autoloading the efivars driver - Lee, Chun-Yi
- Use the PE/COFF headers in the x86 EFI boot stub to request that
the stub be loaded with CONFIG_PHYSICAL_ALIGN alignment - Michael
Brown
- Consolidate all the x86 EFI quirks into one file - Saurabh Tangri
- Additional error logging in x86 EFI boot stub - Ulf Winkelvos
- Support loading initrd above 4G in EFI boot stub - Yinghai Lu
- EFI reboot patches for ACPI hardware reduced platforms"
* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
efi/arm64: Handle missing virtual mapping for UEFI System Table
arch/x86/xen: Silence compiler warnings
xen: Silence compiler warnings
x86/efi: Request desired alignment via the PE/COFF headers
x86/efi: Add better error logging to EFI boot stub
efi: Autoload efivars
efi: Update stale locking comment for struct efivars
arch/x86: Remove efi_set_rtc_mmss()
arch/x86: Replace plain strings with constants
xen: Put EFI machinery in place
xen: Define EFI related stuff
arch/x86: Remove redundant set_bit(EFI_MEMMAP) call
arch/x86: Remove redundant set_bit(EFI_SYSTEM_TABLES) call
efi: Introduce EFI_PARAVIRT flag
arch/x86: Do not access EFI memory map if it is not available
efi: Use early_mem*() instead of early_io*()
arch/ia64: Define early_memunmap()
x86/reboot: Add EFI reboot quirk for ACPI Hardware Reduced flag
efi/reboot: Allow powering off machines using EFI
efi/reboot: Add generic wrapper around EfiResetSystem()
...
Compiler complains in the following way when x86 32-bit kernel
with Xen support is build:
CC arch/x86/xen/enlighten.o
arch/x86/xen/enlighten.c: In function ‘xen_start_kernel’:
arch/x86/xen/enlighten.c:1726:3: warning: right shift count >= width of type [enabled by default]
Such line contains following EFI initialization code:
boot_params.efi_info.efi_systab_hi = (__u32)(__pa(efi_systab_xen) >> 32);
There is no issue if x86 64-bit kernel is build. However, 32-bit case
generate warning (even if that code will not be executed because Xen
does not work on 32-bit EFI platforms) due to __pa() returning unsigned long
type which has 32-bits width. So move whole EFI initialization stuff
to separate function and build it conditionally to avoid above mentioned
warning on x86 32-bit architecture.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Since af06d66ee32b (x86: fix setup of PVH Dom0 memory map) in Xen, PVH
dom0 need only use the memory memory provided by Xen which has already
setup all the correct holes.
xen_memory_setup() then ends up being trivial for a PVH guest so
introduce a new function (xen_auto_xlated_memory_setup()).
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Tested-by: Roger Pau Monné <roger.pau@citrix.com>
New architectures currently have to provide implementations of 5 different
functions: xen_arch_pre_suspend(), xen_arch_post_suspend(),
xen_arch_hvm_post_suspend(), xen_mm_pin_all(), and xen_mm_unpin_all().
Refactor the suspend code to only require xen_arch_pre_suspend() and
xen_arch_post_suspend().
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
otherwise we will get for some user-space applications
that use 'clone' with CLONE_CHILD_SETTID | CLONE_CHILD_CLEARTID
end up hitting an assert in glibc manifested by:
general protection ip:7f80720d364c sp:7fff98fd8a80 error:0 in
libc-2.13.so[7f807209e000+180000]
This is due to the nature of said operations which sets and clears
the PID. "In the successful one I can see that the page table of
the parent process has been updated successfully to use a
different physical page, so the write of the tid on
that page only affects the child...
On the other hand, in the failed case, the write seems to happen before
the copy of the original page is done, so both the parent and the child
end up with the same value (because the parent copies the page after
the write of the child tid has already happened)."
(Roger's analysis). The nature of this is due to the Xen's commit
of 51e2cac257ec8b4080d89f0855c498cbbd76a5e5
"x86/pvh: set only minimal cr0 and cr4 flags in order to use paging"
the CR0_WP was removed so COW features of the Linux kernel were not
operating properly.
While doing that also update the rest of the CR0 flags to be inline
with what a baremetal Linux kernel would set them to.
In 'secondary_startup_64' (baremetal Linux) sets:
X86_CR0_PE | X86_CR0_MP | X86_CR0_ET | X86_CR0_NE | X86_CR0_WP |
X86_CR0_AM | X86_CR0_PG
The hypervisor for HVM type guests (which PVH is a bit) sets:
X86_CR0_PE | X86_CR0_ET | X86_CR0_TS
For PVH it specifically sets:
X86_CR0_PG
Which means we need to set the rest: X86_CR0_MP | X86_CR0_NE |
X86_CR0_WP | X86_CR0_AM to have full parity.
Signed-off-by: Roger Pau Monne <roger.pau@citrix.com>
Signed-off-by: Mukesh Rathor <mukesh.rathor@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
[v1: Took out the cr4 writes to be a seperate patch]
[v2: 0-DAY kernel found xen_setup_gdt to be missing a static]
The VCPU bringup protocol follows the PV with certain twists.
From xen/include/public/arch-x86/xen.h:
Also note that when calling DOMCTL_setvcpucontext and VCPU_initialise
for HVM and PVH guests, not all information in this structure is updated:
- For HVM guests, the structures read include: fpu_ctxt (if
VGCT_I387_VALID is set), flags, user_regs, debugreg[*]
- PVH guests are the same as HVM guests, but additionally use ctrlreg[3] to
set cr3. All other fields not used should be set to 0.
This is what we do. We piggyback on the 'xen_setup_gdt' - but modify
a bit - we need to call 'load_percpu_segment' so that 'switch_to_new_gdt'
can load per-cpu data-structures. It has no effect on the VCPU0.
We also piggyback on the %rdi register to pass in the CPU number - so
that when we bootup a new CPU, the cpu_bringup_and_idle will have
passed as the first parameter the CPU number (via %rdi for 64-bit).
Signed-off-by: Mukesh Rathor <mukesh.rathor@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Current code uses asmlinkage for functions without arguments.
This adds an implicit regparm(0) which creates a warning
when assigning the function to pointers.
Use __visible for the functions without arguments.
This avoids having to add regparm(0) to function pointers.
Since they have no arguments it does not make any difference.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1377115662-4865-1-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings. In any case, they are temporary and harmless.
This removes all the arch/x86 uses of the __cpuinit macros from
all C files. x86 only had the one __CPUINIT used in assembly files,
and it wasn't paired off with a .previous or a __FINIT, so we can
delete it directly w/o any corresponding additional change there.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
This reverts commit 9d02b43dee.
We are doing this b/c on 32-bit PVonHVM with older hypervisors
(Xen 4.1) it ends up bothing up the start_info. This is bad b/c
we use it for the time keeping, and the timekeeping code loops
forever - as the version field never changes. Olaf says to
revert it, so lets do that.
Acked-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
This is a respin of 00e37bdb01
("xen PVonHVM: move shared_info to MMIO before kexec").
Currently kexec in a PVonHVM guest fails with a triple fault because the
new kernel overwrites the shared info page. The exact failure depends on
the size of the kernel image. This patch moves the pfn from RAM into an
E820 reserved memory area.
The pfn containing the shared_info is located somewhere in RAM. This will
cause trouble if the current kernel is doing a kexec boot into a new
kernel. The new kernel (and its startup code) can not know where the pfn
is, so it can not reserve the page. The hypervisor will continue to update
the pfn, and as a result memory corruption occours in the new kernel.
The toolstack marks the memory area FC000000-FFFFFFFF as reserved in the
E820 map. Within that range newer toolstacks (4.3+) will keep 1MB
starting from FE700000 as reserved for guest use. Older Xen4 toolstacks
will usually not allocate areas up to FE700000, so FE700000 is expected
to work also with older toolstacks.
In Xen3 there is no reserved area at a fixed location. If the guest is
started on such old hosts the shared_info page will be placed in RAM. As
a result kexec can not be used.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Compile events.c on ARM.
Parse, map and enable the IRQ to get event notifications from the device
tree (node "/xen").
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
During bootup Xen supplies us with a P2M array. It sticks
it right after the ramdisk, as can be seen with a 128GB PV guest:
(certain parts removed for clarity):
xc_dom_build_image: called
xc_dom_alloc_segment: kernel : 0xffffffff81000000 -> 0xffffffff81e43000 (pfn 0x1000 + 0xe43 pages)
xc_dom_pfn_to_ptr: domU mapping: pfn 0x1000+0xe43 at 0x7f097d8bf000
xc_dom_alloc_segment: ramdisk : 0xffffffff81e43000 -> 0xffffffff925c7000 (pfn 0x1e43 + 0x10784 pages)
xc_dom_pfn_to_ptr: domU mapping: pfn 0x1e43+0x10784 at 0x7f0952dd2000
xc_dom_alloc_segment: phys2mach : 0xffffffff925c7000 -> 0xffffffffa25c7000 (pfn 0x125c7 + 0x10000 pages)
xc_dom_pfn_to_ptr: domU mapping: pfn 0x125c7+0x10000 at 0x7f0942dd2000
xc_dom_alloc_page : start info : 0xffffffffa25c7000 (pfn 0x225c7)
xc_dom_alloc_page : xenstore : 0xffffffffa25c8000 (pfn 0x225c8)
xc_dom_alloc_page : console : 0xffffffffa25c9000 (pfn 0x225c9)
nr_page_tables: 0x0000ffffffffffff/48: 0xffff000000000000 -> 0xffffffffffffffff, 1 table(s)
nr_page_tables: 0x0000007fffffffff/39: 0xffffff8000000000 -> 0xffffffffffffffff, 1 table(s)
nr_page_tables: 0x000000003fffffff/30: 0xffffffff80000000 -> 0xffffffffbfffffff, 1 table(s)
nr_page_tables: 0x00000000001fffff/21: 0xffffffff80000000 -> 0xffffffffa27fffff, 276 table(s)
xc_dom_alloc_segment: page tables : 0xffffffffa25ca000 -> 0xffffffffa26e1000 (pfn 0x225ca + 0x117 pages)
xc_dom_pfn_to_ptr: domU mapping: pfn 0x225ca+0x117 at 0x7f097d7a8000
xc_dom_alloc_page : boot stack : 0xffffffffa26e1000 (pfn 0x226e1)
xc_dom_build_image : virt_alloc_end : 0xffffffffa26e2000
xc_dom_build_image : virt_pgtab_end : 0xffffffffa2800000
So the physical memory and virtual (using __START_KERNEL_map addresses)
layout looks as so:
phys __ka
/------------\ /-------------------\
| 0 | empty | 0xffffffff80000000|
| .. | | .. |
| 16MB | <= kernel starts | 0xffffffff81000000|
| .. | | |
| 30MB | <= kernel ends => | 0xffffffff81e43000|
| .. | & ramdisk starts | .. |
| 293MB | <= ramdisk ends=> | 0xffffffff925c7000|
| .. | & P2M starts | .. |
| .. | | .. |
| 549MB | <= P2M ends => | 0xffffffffa25c7000|
| .. | start_info | 0xffffffffa25c7000|
| .. | xenstore | 0xffffffffa25c8000|
| .. | cosole | 0xffffffffa25c9000|
| 549MB | <= page tables => | 0xffffffffa25ca000|
| .. | | |
| 550MB | <= PGT end => | 0xffffffffa26e1000|
| .. | boot stack | |
\------------/ \-------------------/
As can be seen, the ramdisk, P2M and pagetables are taking
a bit of __ka addresses space. Which is a problem since the
MODULES_VADDR starts at 0xffffffffa0000000 - and P2M sits
right in there! This results during bootup with the inability to
load modules, with this error:
------------[ cut here ]------------
WARNING: at /home/konrad/ssd/linux/mm/vmalloc.c:106 vmap_page_range_noflush+0x2d9/0x370()
Call Trace:
[<ffffffff810719fa>] warn_slowpath_common+0x7a/0xb0
[<ffffffff81030279>] ? __raw_callee_save_xen_pmd_val+0x11/0x1e
[<ffffffff81071a45>] warn_slowpath_null+0x15/0x20
[<ffffffff81130b89>] vmap_page_range_noflush+0x2d9/0x370
[<ffffffff81130c4d>] map_vm_area+0x2d/0x50
[<ffffffff811326d0>] __vmalloc_node_range+0x160/0x250
[<ffffffff810c5369>] ? module_alloc_update_bounds+0x19/0x80
[<ffffffff810c6186>] ? load_module+0x66/0x19c0
[<ffffffff8105cadc>] module_alloc+0x5c/0x60
[<ffffffff810c5369>] ? module_alloc_update_bounds+0x19/0x80
[<ffffffff810c5369>] module_alloc_update_bounds+0x19/0x80
[<ffffffff810c70c3>] load_module+0xfa3/0x19c0
[<ffffffff812491f6>] ? security_file_permission+0x86/0x90
[<ffffffff810c7b3a>] sys_init_module+0x5a/0x220
[<ffffffff815ce339>] system_call_fastpath+0x16/0x1b
---[ end trace fd8f7704fdea0291 ]---
vmalloc: allocation failure, allocated 16384 of 20480 bytes
modprobe: page allocation failure: order:0, mode:0xd2
Since the __va and __ka are 1:1 up to MODULES_VADDR and
cleanup_highmap rids __ka of the ramdisk mapping, what
we want to do is similar - get rid of the P2M in the __ka
address space. There are two ways of fixing this:
1) All P2M lookups instead of using the __ka address would
use the __va address. This means we can safely erase from
__ka space the PMD pointers that point to the PFNs for
P2M array and be OK.
2). Allocate a new array, copy the existing P2M into it,
revector the P2M tree to use that, and return the old
P2M to the memory allocate. This has the advantage that
it sets the stage for using XEN_ELF_NOTE_INIT_P2M
feature. That feature allows us to set the exact virtual
address space we want for the P2M - and allows us to
boot as initial domain on large machines.
So we pick option 2).
This patch only lays the groundwork in the P2M code. The patch
that modifies the MMU is called "xen/mmu: Copy and revector the P2M tree."
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
We don't need to return the new PGD - as we do not use it.
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* Extend the APIC ops implementation and add IRQ_WORKER vector support so that 'perf' can work properly.
* Fix self-ballooning code, and balloon logic when booting as initial domain.
* Move array printing code to generic debugfs
* Support XenBus domains.
* Lazily free grants when a domain is dead/non-existent.
* In M2P code use batching calls
Bug-fixes:
* Fix NULL dereference in allocation failure path (hvc_xen)
* Fix unbinding of IRQ_WORKER vector during vCPU hot-unplug
* Fix HVM guest resume - we would leak an PIRQ value instead of reusing the existing one.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJPu9MpAAoJEFjIrFwIi8fJaNQH/RylThiO+O+LBpPrO8VRUw+2
/Io98T7ZK2ggoUeaJx0C8irM0JMFAkxGMcfX3w9fwNt/BTec4s++4JhbN1jYN0da
6a0PqINo+M8y73So6CBfuJDCunaRLGKVG/ibIO3Y3WAff51/H+DMvO7uYYDAE0aA
mikyOxnaty0DiG5i4JGDHGmCzDASfK/jgGccZ03m6522mDx5ZIbTzZWONLfz8dqT
rbxnn9vrNLgEYWuzyLMwW0GymToUtt01xBQvwJLAbhn8lr1WBRBLpxXA+5iYNQrn
Ri25G7keYJhG4uwZfaHnR+4HTrmhlGzK1Z96dkqpGUaeIcdyWmPMp22VtBBiwG8=
=uyRr
-----END PGP SIGNATURE-----
Merge tag 'stable/for-linus-3.5-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
Pull Xen updates from Konrad Rzeszutek Wilk:
"Features:
* Extend the APIC ops implementation and add IRQ_WORKER vector
support so that 'perf' can work properly.
* Fix self-ballooning code, and balloon logic when booting as initial
domain.
* Move array printing code to generic debugfs
* Support XenBus domains.
* Lazily free grants when a domain is dead/non-existent.
* In M2P code use batching calls
Bug-fixes:
* Fix NULL dereference in allocation failure path (hvc_xen)
* Fix unbinding of IRQ_WORKER vector during vCPU hot-unplug
* Fix HVM guest resume - we would leak an PIRQ value instead of
reusing the existing one."
Fix up add-add onflicts in arch/x86/xen/enlighten.c due to addition of
apic ipi interface next to the new apic_id functions.
* tag 'stable/for-linus-3.5-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen: do not map the same GSI twice in PVHVM guests.
hvc_xen: NULL dereference on allocation failure
xen: Add selfballoning memory reservation tunable.
xenbus: Add support for xenbus backend in stub domain
xen/smp: unbind irqworkX when unplugging vCPUs.
xen: enter/exit lazy_mmu_mode around m2p_override calls
xen/acpi/sleep: Enable ACPI sleep via the __acpi_os_prepare_sleep
xen: implement IRQ_WORK_VECTOR handler
xen: implement apic ipi interface
xen/setup: update VA mapping when releasing memory during setup
xen/setup: Combine the two hypercall functions - since they are quite similar.
xen/setup: Populate freed MFNs from non-RAM E820 entries and gaps to E820 RAM
xen/setup: Only print "Freeing XXX-YYY pfn range: Z pages freed" if Z > 0
xen/gnttab: add deferred freeing logic
debugfs: Add support to print u32 array in debugfs
xen/p2m: An early bootup variant of set_phys_to_machine
xen/p2m: Collapse early_alloc_p2m_middle redundant checks.
xen/p2m: Allow alloc_p2m_middle to call reserve_brk depending on argument
xen/p2m: Move code around to allow for better re-usage.
In xen_memory_setup(), if a page that is being released has a VA
mapping this must also be updated. Otherwise, the page will be not
released completely -- it will still be referenced in Xen and won't be
freed util the mapping is removed and this prevents it from being
reallocated at a different PFN.
This was already being done for the ISA memory region in
xen_ident_map_ISA() but on many systems this was omitting a few pages
as many systems marked a few pages below the ISA memory region as
reserved in the e820 map.
This fixes errors such as:
(XEN) page_alloc.c:1148:d0 Over-allocation for domain 0: 2097153 > 2097152
(XEN) memory.c:133:d0 Could not allocate order=0 extent: id=0 memflags=0 (0 of 17)
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Or rather just implement one different function as opposed
to the native one : the read function.
We synthesize the values.
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
[v1: Rebased on top of tip/x86/urgent]
[v2: Return 0xfd instead of 0xff in the default case]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Get the information about the VGA console hardware from Xen, and put
it into the form the bootloader normally generates, so that the rest
of the kernel can deal with VGA as usual.
[ Impact: make VGA console work in dom0 ]
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
[v1: Rebased on 2.6.39]
[v2: Removed incorrect comments and fixed compile warnings]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Initialize PV spinlocks on boot CPU right after native_smp_prepare_cpus
(that switch to APIC mode and initialize APIC routing); on secondary
CPUs on CPU_UP_PREPARE.
Enable the usage of event channels to send and receive IPIs when
running as a PV on HVM guest.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Convert Linux PAT entries into Xen ones when constructing ptes. Linux
doesn't use _PAGE_PAT for ptes, so the only difference in the first 4
entries is that Linux uses _PAGE_PWT for WC, whereas Xen (and default)
use it for WT.
xen_pte_val does the inverse conversion.
We hard-code assumptions about Linux's current PAT layout, but a
warning on the wrmsr to MSR_IA32_CR_PAT should point out any problems.
If necessary we could go to a more general table-based conversion between
Linux and Xen PAT entries.
hugetlbfs poses a problem at the moment, the x86 architecture uses the
same flag for _PAGE_PAT and _PAGE_PSE, which changes meaning depending
on which pagetable level we're using. At the moment this should be OK
so long as nobody tries to do a pte_val on a hugetlbfs pte.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Keep xen_max_p2m_pfn up to date with the end of the extra memory
we're adding. It is possible that it will be too high since memory
may be truncated by a "mem=" option on the kernel command line, but
that won't matter.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
* upstream/pvhvm:
Introduce CONFIG_XEN_PVHVM compile option
blkfront: do not create a PV cdrom device if xen_hvm_guest
support multiple .discard.* sections to avoid section type conflicts
xen/pvhvm: fix build problem when !CONFIG_XEN
xenfs: enable for HVM domains too
x86: Call HVMOP_pagetable_dying on exit_mmap.
x86: Unplug emulated disks and nics.
x86: Use xen_vcpuop_clockevent, xen_clocksource and xen wallclock.
xen: Fix find_unbound_irq in presence of ioapic irqs.
xen: Add suspend/resume support for PV on HVM guests.
xen: Xen PCI platform device driver.
x86/xen: event channels delivery on HVM.
x86: early PV on HVM features initialization.
xen: Add support for HVM hypercalls.
Conflicts:
arch/x86/xen/enlighten.c
arch/x86/xen/time.c
Register a panic notifier so that when the guest crashes it can shut
down the domain and indicate it was a crash to the host.
Signed-off-by: Donald Dutile <ddutile@redhat.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Add a xen_emul_unplug command line option to the kernel to unplug
xen emulated disks and nics.
Set the default value of xen_emul_unplug depending on whether or
not the Xen PV frontends and the Xen platform PCI driver have
been compiled for this kernel (modules or built-in are both OK).
The user can specify xen_emul_unplug=ignore to enable PV drivers on HVM
even if the host platform doesn't support unplug.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Use xen_vcpuop_clockevent instead of hpet and APIC timers as main
clockevent device on all vcpus, use the xen wallclock time as wallclock
instead of rtc and use xen_clocksource as clocksource.
The pv clock algorithm needs to work correctly for the xen_clocksource
and xen wallclock to be usable, only modern Xen versions offer a
reliable pv clock in HVM guests (XENFEAT_hvm_safe_pvclock).
Using the hpet as clocksource means a VMEXIT every time we read/write to
the hpet mmio addresses, pvclock give us a better rating without
VMEXITs. Same goes for the xen wallclock and xen_vcpuop_clockevent
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Don Dutile <ddutile@redhat.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Suspend/resume requires few different things on HVM: the suspend
hypercall is different; we don't need to save/restore memory related
settings; except the shared info page and the callback mechanism.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Set the callback to receive evtchns from Xen, using the
callback vector delivery mechanism.
The traditional way for receiving event channel notifications from Xen
is via the interrupts from the platform PCI device.
The callback vector is a newer alternative that allow us to receive
notifications on any vcpu and doesn't need any PCI support: we allocate
a vector exclusively to receive events, in the vector handler we don't
need to interact with the vlapic, therefore we avoid a VMEXIT.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
pvops kernels >= 2.6.30 can currently only be saved and restored once. The
second attempt to save results in:
ERROR Internal error: Frame# in pfn-to-mfn frame list is not in pseudophys
ERROR Internal error: entry 0: p2m_frame_list[0] is 0xf2c2c2c2, max 0x120000
ERROR Internal error: Failed to map/save the p2m frame list
I finally narrowed it down to:
commit cdaead6b4e
Author: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Fri Feb 27 15:34:59 2009 -0800
xen: split construction of p2m mfn tables from registration
Build the p2m_mfn_list_list early with the rest of the p2m table, but
register it later when the real shared_info structure is in place.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
The unforeseen side-effect of this change was to cause the mfn list list to not
be rebuilt on resume. Prior to this change it would have been rebuilt via
xen_post_suspend() -> xen_setup_shared_info() -> xen_setup_mfn_list_list().
Fix by explicitly calling xen_build_mfn_list_list() from xen_post_suspend().
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
This is necessary to ensure the runstate area is available to
xen_sched_clock before any calls to printk which will require it in
order to provide a timestamp.
I chose to pull the xen_setup_runstate_info out of xen_time_init into
the caller in order to maintain parity with calling
xen_setup_runstate_info separately from calling xen_time_resume.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>
We really do not need two paravirt/x86_init_ops functions which are
called in two consecutive source lines. Move the only user of
post_allocator_init into the already existing pagetable_setup_done
function.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* 'x86-xen-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (42 commits)
xen: cache cr0 value to avoid trap'n'emulate for read_cr0
xen/x86-64: clean up warnings about IST-using traps
xen/x86-64: fix breakpoints and hardware watchpoints
xen: reserve Xen start_info rather than e820 reserving
xen: add FIX_TEXT_POKE to fixmap
lguest: update lazy mmu changes to match lguest's use of kvm hypercalls
xen: honour VCPU availability on boot
xen: add "capabilities" file
xen: drop kexec bits from /sys/hypervisor since kexec isn't implemented yet
xen/sys/hypervisor: change writable_pt to features
xen: add /sys/hypervisor support
xen/xenbus: export xenbus_dev_changed
xen: use device model for suspending xenbus devices
xen: remove suspend_cancel hook
xen/dev-evtchn: clean up locking in evtchn
xen: export ioctl headers to userspace
xen: add /dev/xen/evtchn driver
xen: add irq_from_evtchn
xen: clean up gate trap/interrupt constants
xen: set _PAGE_NX in __supported_pte_mask before pagetable construction
...
Xiaohui Xin and some other folks at Intel have been looking into what's
behind the performance hit of paravirt_ops when running native.
It appears that the hit is entirely due to the paravirtualized
spinlocks introduced by:
| commit 8efcbab674
| Date: Mon Jul 7 12:07:51 2008 -0700
|
| paravirt: introduce a "lock-byte" spinlock implementation
The extra call/return in the spinlock path is somehow
causing an increase in the cycles/instruction of somewhere around 2-7%
(seems to vary quite a lot from test to test). The working theory is
that the CPU's pipeline is getting upset about the
call->call->locked-op->return->return, and seems to be failing to
speculate (though I haven't seen anything definitive about the precise
reasons). This doesn't entirely make sense, because the performance
hit is also visible on unlock and other operations which don't involve
locked instructions. But spinlock operations clearly swamp all the
other pvops operations, even though I can't imagine that they're
nearly as common (there's only a .05% increase in instructions
executed).
If I disable just the pv-spinlock calls, my tests show that pvops is
identical to non-pvops performance on native (my measurements show that
it is actually about .1% faster, but Xiaohui shows a .05% slowdown).
Summary of results, averaging 10 runs of the "mmperf" test, using a
no-pvops build as baseline:
nopv Pv-nospin Pv-spin
CPU cycles 100.00% 99.89% 102.18%
instructions 100.00% 100.10% 100.15%
CPI 100.00% 99.79% 102.03%
cache ref 100.00% 100.84% 100.28%
cache miss 100.00% 90.47% 88.56%
cache miss rate 100.00% 89.72% 88.31%
branches 100.00% 99.93% 100.04%
branch miss 100.00% 103.66% 107.72%
branch miss rt 100.00% 103.73% 107.67%
wallclock 100.00% 99.90% 102.20%
The clear effect here is that the 2% increase in CPI is
directly reflected in the final wallclock time.
(The other interesting effect is that the more ops are
out of line calls via pvops, the lower the cache access
and miss rates. Not too surprising, but it suggests that
the non-pvops kernel is over-inlined. On the flipside,
the branch misses go up correspondingly...)
So, what's the fix?
Paravirt patching turns all the pvops calls into direct calls, so
_spin_lock etc do end up having direct calls. For example, the compiler
generated code for paravirtualized _spin_lock is:
<_spin_lock+0>: mov %gs:0xb4c8,%rax
<_spin_lock+9>: incl 0xffffffffffffe044(%rax)
<_spin_lock+15>: callq *0xffffffff805a5b30
<_spin_lock+22>: retq
The indirect call will get patched to:
<_spin_lock+0>: mov %gs:0xb4c8,%rax
<_spin_lock+9>: incl 0xffffffffffffe044(%rax)
<_spin_lock+15>: callq <__ticket_spin_lock>
<_spin_lock+20>: nop; nop /* or whatever 2-byte nop */
<_spin_lock+22>: retq
One possibility is to inline _spin_lock, etc, when building an
optimised kernel (ie, when there's no spinlock/preempt
instrumentation/debugging enabled). That will remove the outer
call/return pair, returning the instruction stream to a single
call/return, which will presumably execute the same as the non-pvops
case. The downsides arel 1) it will replicate the
preempt_disable/enable code at eack lock/unlock callsite; this code is
fairly small, but not nothing; and 2) the spinlock definitions are
already a very heavily tangled mass of #ifdefs and other preprocessor
magic, and making any changes will be non-trivial.
The other obvious answer is to disable pv-spinlocks. Making them a
separate config option is fairly easy, and it would be trivial to
enable them only when Xen is enabled (as the only non-default user).
But it doesn't really address the common case of a distro build which
is going to have Xen support enabled, and leaves the open question of
whether the native performance cost of pv-spinlocks is worth the
performance improvement on a loaded Xen system (10% saving of overall
system CPU when guests block rather than spin). Still it is a
reasonable short-term workaround.
[ Impact: fix pvops performance regression when running native ]
Analysed-by: "Xin Xiaohui" <xiaohui.xin@intel.com>
Analysed-by: "Li Xin" <xin.li@intel.com>
Analysed-by: "Nakajima Jun" <jun.nakajima@intel.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Xen-devel <xen-devel@lists.xensource.com>
LKML-Reference: <4A0B62F7.5030802@goop.org>
[ fixed the help text ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
1. make sure early-allocated ptes are pinned, so they can be later
unpinned
2. don't pin pmd+pud, just make them RO
3. scatter some __inits around
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
1. make sure early-allocated ptes are pinned, so they can be later
unpinned
2. don't pin pmd+pud, just make them RO
3. scatter some __inits around
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Impact: allow preemption during lazy mmu updates
If we're in lazy mmu mode when context switching, leave
lazy mmu mode, but remember the task's state in
TIF_LAZY_MMU_UPDATES. When we resume the task, check this
flag and re-enter lazy mmu mode if its set.
This sets things up for allowing lazy mmu mode while preemptible,
though that won't actually be active until the next change.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
We need to access percpu data fairly early, so set up the percpu
registers as soon as possible. We only need to load the appropriate
segment register. We already have a GDT, but its hard to change it
early because we need to manipulate the pagetable to do so, and that
hasn't been set up yet.
Also, set the kernel stack when bringing up secondary CPUs. If we
don't they all end up sharing the same stack...
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Juergen Gross