Commit 05a648cd2dd7 ("iommu/io-pgtable-arm: Rationalise TCR handling")
reworked the way in which the TCR register value is returned from the
io-pgtable code when targetting the Arm long-descriptor format, in
preparation for allowing page-tables to target TTBR1.
As it turns out, the new interface is a lot nicer to use, so do the same
conversion for the VTCR register even though there is only a single base
register for stage-2 translation.
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Now that we have arm-smmu.h defining various SMMU constants, ensure that
they are namespaced with the ARM_SMMU_ prefix in order to avoid conflicts
with the CPU, such as the one we're currently bodging around with the
TCR.
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Although it's conceptually nice for the io_pgtable_cfg to provide a
standard VMSA TCR value, the reality is that no VMSA-compliant IOMMU
looks exactly like an Arm CPU, and they all have various other TCR
controls which io-pgtable can't be expected to understand. Thus since
there is an expectation that drivers will have to add to the given TCR
value anyway, let's strip it down to just the essentials that are
directly relevant to io-pgtable's inner workings - namely the various
sizes and the walk attributes.
Tested-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[will: Add missing include of bitfield.h]
Signed-off-by: Will Deacon <will@kernel.org>
Add reset hook for sdm845 based platforms to turn off
the wait-for-safe sequence.
Understanding how wait-for-safe logic affects USB and UFS performance
on MTP845 and DB845 boards:
Qcom's implementation of arm,mmu-500 adds a WAIT-FOR-SAFE logic
to address under-performance issues in real-time clients, such as
Display, and Camera.
On receiving an invalidation requests, the SMMU forwards SAFE request
to these clients and waits for SAFE ack signal from real-time clients.
The SAFE signal from such clients is used to qualify the start of
invalidation.
This logic is controlled by chicken bits, one for each - MDP (display),
IFE0, and IFE1 (camera), that can be accessed only from secure software
on sdm845.
This configuration, however, degrades the performance of non-real time
clients, such as USB, and UFS etc. This happens because, with wait-for-safe
logic enabled the hardware tries to throttle non-real time clients while
waiting for SAFE ack signals from real-time clients.
On mtp845 and db845 devices, with wait-for-safe logic enabled by the
bootloaders we see degraded performance of USB and UFS when kernel
enables the smmu stage-1 translations for these clients.
Turn off this wait-for-safe logic from the kernel gets us back the perf
of USB and UFS devices until we re-visit this when we start seeing perf
issues on display/camera on upstream supported SDM845 platforms.
The bootloaders on these boards implement secure monitor callbacks to
handle a specific command - QCOM_SCM_SVC_SMMU_PROGRAM with which the
logic can be toggled.
There are other boards such as cheza whose bootloaders don't enable this
logic. Such boards don't implement callbacks to handle the specific SCM
call so disabling this logic for such boards will be a no-op.
This change is inspired by the downstream change from Patrick Daly
to address performance issues with display and camera by handling
this wait-for-safe within separte io-pagetable ops to do TLB
maintenance. So a big thanks to him for the change and for all the
offline discussions.
Without this change the UFS reads are pretty slow:
$ time dd if=/dev/sda of=/dev/zero bs=1048576 count=10 conv=sync
10+0 records in
10+0 records out
10485760 bytes (10.0MB) copied, 22.394903 seconds, 457.2KB/s
real 0m 22.39s
user 0m 0.00s
sys 0m 0.01s
With this change they are back to rock!
$ time dd if=/dev/sda of=/dev/zero bs=1048576 count=300 conv=sync
300+0 records in
300+0 records out
314572800 bytes (300.0MB) copied, 1.030541 seconds, 291.1MB/s
real 0m 1.03s
user 0m 0.00s
sys 0m 0.54s
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Will Deacon <will@kernel.org>
Although CONFIG_ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT is a welcome tool
for smoking out inadequate firmware, the failure mode is non-obvious
and can be confusing for end users. Add some special-case reporting of
Unidentified Stream Faults to help clarify this particular symptom.
Since we're adding yet another print to the mix, also break out an
explicit ratelimit state to make sure everything stays together (and
reduce the static storage footprint a little).
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
With the .tlb_sync interface no longer exposed directly to io-pgtable,
strip away the remains of that abstraction layer. Retain the callback
in spirit, though, by transforming it into an implementation override
for the low-level sync routine itself, for which we will have at least
one user.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Fill in 'native' iommu_flush_ops callbacks for all the
arm_smmu_flush_ops variants, and clear up the remains of the previous
.tlb_inv_range abstraction.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
* for-joerg/arm-smmu/smmu-v2:
Refactoring to allow for implementation-specific hooks in 'arm-smmu-impl.c'
* for-joerg/arm-smmu/smmu-v3:
Support for deferred TLB invalidation and batching of commands
Rework ATC invalidation for ATS-enabled PCIe masters
As part of the grand SMMU driver refactoring effort, the I/O register
accessors were moved into 'arm-smmu.h' in commit 6d7dff62af
("iommu/arm-smmu: Move Secure access quirk to implementation").
On 32-bit architectures (such as ARM), the 64-bit accessors are defined
in 'linux/io-64-nonatomic-hi-lo.h', so include this header to fix the
build.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Allocating and initialising a context for a domain is another point
where certain implementations are known to want special behaviour.
Currently the other half of the Cavium workaround comes into play here,
so let's finish the job to get the whole thing right out of the way.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Reset is an activity rife with implementation-defined poking. Add a
corresponding hook, and use it to encapsulate the existing MMU-500
details.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Probing the ID registers and setting up the SMMU configuration is an
area where overrides and workarounds may well be needed. Indeed, the
Cavium workaround detection lives there at the moment, so let's break
that out.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Move detection of the Secure access quirk to its new home, trimming it
down in the process - time has proven that boolean DT flags are neither
ideal nor necessarily sufficient, so it's highly unlikely we'll ever add
more, let alone enough to justify the frankly overengineered parsing
machinery.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Add some nascent infrastructure for handling implementation-specific
details outside the flow of the architectural code. This will allow us
to keep mutually-incompatible vendor-specific hooks in their own files
where the respective interested parties can maintain them with minimal
chance of conflicts. As somewhat of a template, we'll start with a
general place to collect the relatively trivial existing quirks.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
We're about to start using it for more than just register definitions,
so generalise the name.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Will Deacon