Recently fsstress (from fstests) sporadically started to trigger an
infinite loop during fsync operations. This turned out to be because
support for the rename exchange and whiteout operations was added to
fsstress in fstests. These operations, unlike any others in fsstress,
cause file names to be reused, whence triggering this issue. However
it's not necessary to use rename exchange and rename whiteout operations
trigger this issue, simple rename operations and file creations are
enough to trigger the issue.
The issue boils down to when we are logging inodes that conflict (that
had the name of any inode we need to log during the fsync operation), we
keep logging them even if they were already logged before, and after
that we check if there's any other inode that conflicts with them and
then add it again to the list of inodes to log. Skipping already logged
inodes fixes the issue.
Consider the following example:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ mkdir /mnt/testdir # inode 257
$ touch /mnt/testdir/zz # inode 258
$ ln /mnt/testdir/zz /mnt/testdir/zz_link
$ touch /mnt/testdir/a # inode 259
$ sync
# The following 3 renames achieve the same result as a rename exchange
# operation (<rename_exchange> /mnt/testdir/zz_link to /mnt/testdir/a).
$ mv /mnt/testdir/a /mnt/testdir/a/tmp
$ mv /mnt/testdir/zz_link /mnt/testdir/a
$ mv /mnt/testdir/a/tmp /mnt/testdir/zz_link
# The following rename and file creation give the same result as a
# rename whiteout operation (<rename_whiteout> zz to a2).
$ mv /mnt/testdir/zz /mnt/testdir/a2
$ touch /mnt/testdir/zz # inode 260
$ xfs_io -c fsync /mnt/testdir/zz
--> results in the infinite loop
The following steps happen:
1) When logging inode 260, we find that its reference named "zz" was
used by inode 258 in the previous transaction (through the commit
root), so inode 258 is added to the list of conflicting indoes that
need to be logged;
2) After logging inode 258, we find that its reference named "a" was
used by inode 259 in the previous transaction, and therefore we add
inode 259 to the list of conflicting inodes to be logged;
3) After logging inode 259, we find that its reference named "zz_link"
was used by inode 258 in the previous transaction - we add inode 258
to the list of conflicting inodes to log, again - we had already
logged it before at step 3. After logging it again, we find again
that inode 259 conflicts with him, and we add again 259 to the list,
etc - we end up repeating all the previous steps.
So fix this by skipping logging of conflicting inodes that were already
logged.
Fixes: 6b5fc433a7 ("Btrfs: fix fsync after succession of renames of different files")
CC: stable@vger.kernel.org # 5.1+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
level <0 and level >= BTRFS_MAX_LEVEL are already performed upon
extent buffer read by tree checker in btrfs_check_node.
go. As far as 'level <= 0' we are guaranteed that level is '> 0'
because the value of level _before_ reading 'next' is larger than 1
(otherwise we wouldn't have executed that code at all) this in turn
guarantees that 'level' after btrfs_read_buffer is 'level - 1' since
we verify this invariant in:
btrfs_read_buffer
btree_read_extent_buffer_pages
btrfs_verify_level_key
This guarantees that level can never be '<= 0' so the warn on is
never triggered.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The log_root passed to walk_log_tree is guaranteed to have its
root_key.objectid always be BTRFS_TREE_LOG_OBJECTID. This is by
merit that all log roots of an ordinary root are allocated in
alloc_log_tree which hard-codes objectid to be BTRFS_TREE_LOG_OBJECTID.
In case walk_log_tree is called for a log tree found by btrfs_read_fs_root
in btrfs_recover_log_trees, that function already ensures
found_key.objectid is BTRFS_TREE_LOG_OBJECTID.
No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
__btrfs_free_reserved_extent now performs the actions of
btrfs_free_and_pin_reserved_extent. But this name is a bit of a
misnomer, since the extent is not really freed but just pinned. Reflect
this in the new name. No semantics changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When using the NO_HOLES feature, if we punch a hole into a file and then
fsync it, there are cases where a subsequent fsync will miss the fact that
a hole was punched, resulting in the holes not existing after replaying
the log tree.
Essentially these cases all imply that, tree-log.c:copy_items(), is not
invoked for the leafs that delimit holes, because nothing changed those
leafs in the current transaction. And it's precisely copy_items() where
we currenly detect and log holes, which works as long as the holes are
between file extent items in the input leaf or between the beginning of
input leaf and the previous leaf or between the last item in the leaf
and the next leaf.
First example where we miss a hole:
*) The extent items of the inode span multiple leafs;
*) The punched hole covers a range that affects only the extent items of
the first leaf;
*) The fsync operation is done in full mode (BTRFS_INODE_NEEDS_FULL_SYNC
is set in the inode's runtime flags).
That results in the hole not existing after replaying the log tree.
For example, if the fs/subvolume tree has the following layout for a
particular inode:
Leaf N, generation 10:
[ ... INODE_ITEM INODE_REF EXTENT_ITEM (0 64K) EXTENT_ITEM (64K 128K) ]
Leaf N + 1, generation 10:
[ EXTENT_ITEM (128K 64K) ... ]
If at transaction 11 we punch a hole coverting the range [0, 128K[, we end
up dropping the two extent items from leaf N, but we don't touch the other
leaf, so we end up in the following state:
Leaf N, generation 11:
[ ... INODE_ITEM INODE_REF ]
Leaf N + 1, generation 10:
[ EXTENT_ITEM (128K 64K) ... ]
A full fsync after punching the hole will only process leaf N because it
was modified in the current transaction, but not leaf N + 1, since it
was not modified in the current transaction (generation 10 and not 11).
As a result the fsync will not log any holes, because it didn't process
any leaf with extent items.
Second example where we will miss a hole:
*) An inode as its items spanning 5 (or more) leafs;
*) A hole is punched and it covers only the extents items of the 3rd
leaf. This resulsts in deleting the entire leaf and not touching any
of the other leafs.
So the only leaf that is modified in the current transaction, when
punching the hole, is the first leaf, which contains the inode item.
During the full fsync, the only leaf that is passed to copy_items()
is that first leaf, and that's not enough for the hole detection
code in copy_items() to determine there's a hole between the last
file extent item in the 2nd leaf and the first file extent item in
the 3rd leaf (which was the 4th leaf before punching the hole).
Fix this by scanning all leafs and punch holes as necessary when doing a
full fsync (less common than a non-full fsync) when the NO_HOLES feature
is enabled. The lack of explicit file extent items to mark holes makes it
necessary to scan existing extents to determine if holes exist.
A test case for fstests follows soon.
Fixes: 16e7549f04 ("Btrfs: incompatible format change to remove hole extents")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
My fsstress modifications coupled with generic/475 uncovered a failure
to mount and replay the log if we hit a orphaned root. We do not want
to replay the log for an orphan root, but it's completely legitimate to
have an orphaned root with a log attached. Fix this by simply skipping
replaying the log. We still need to pin it's root node so that we do
not overwrite it while replaying other logs, as we re-read the log root
at every stage of the replay.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When logging a file that has shared extents (reflinked with other files or
with itself), we can end up logging multiple checksum items that cover
overlapping ranges. This confuses the search for checksums at log replay
time causing some checksums to never be added to the fs/subvolume tree.
Consider the following example of a file that shares the same extent at
offsets 0 and 256Kb:
[ bytenr 13893632, offset 64Kb, len 64Kb ]
0 64Kb
[ bytenr 13631488, offset 64Kb, len 192Kb ]
64Kb 256Kb
[ bytenr 13893632, offset 0, len 256Kb ]
256Kb 512Kb
When logging the inode, at tree-log.c:copy_items(), when processing the
file extent item at offset 0, we log a checksum item covering the range
13959168 to 14024704, which corresponds to 13893632 + 64Kb and 13893632 +
64Kb + 64Kb, respectively.
Later when processing the extent item at offset 256K, we log the checksums
for the range from 13893632 to 14155776 (which corresponds to 13893632 +
256Kb). These checksums get merged with the checksum item for the range
from 13631488 to 13893632 (13631488 + 256Kb), logged by a previous fsync.
So after this we get the two following checksum items in the log tree:
(...)
item 6 key (EXTENT_CSUM EXTENT_CSUM 13631488) itemoff 3095 itemsize 512
range start 13631488 end 14155776 length 524288
item 7 key (EXTENT_CSUM EXTENT_CSUM 13959168) itemoff 3031 itemsize 64
range start 13959168 end 14024704 length 65536
The first one covers the range from the second one, they overlap.
So far this does not cause a problem after replaying the log, because
when replaying the file extent item for offset 256K, we copy all the
checksums for the extent 13893632 from the log tree to the fs/subvolume
tree, since searching for an checksum item for bytenr 13893632 leaves us
at the first checksum item, which covers the whole range of the extent.
However if we write 64Kb to file offset 256Kb for example, we will
not be able to find and copy the checksums for the last 128Kb of the
extent at bytenr 13893632, referenced by the file range 384Kb to 512Kb.
After writing 64Kb into file offset 256Kb we get the following extent
layout for our file:
[ bytenr 13893632, offset 64K, len 64Kb ]
0 64Kb
[ bytenr 13631488, offset 64Kb, len 192Kb ]
64Kb 256Kb
[ bytenr 14155776, offset 0, len 64Kb ]
256Kb 320Kb
[ bytenr 13893632, offset 64Kb, len 192Kb ]
320Kb 512Kb
After fsync'ing the file, if we have a power failure and then mount
the filesystem to replay the log, the following happens:
1) When replaying the file extent item for file offset 320Kb, we
lookup for the checksums for the extent range from 13959168
(13893632 + 64Kb) to 14155776 (13893632 + 256Kb), through a call
to btrfs_lookup_csums_range();
2) btrfs_lookup_csums_range() finds the checksum item that starts
precisely at offset 13959168 (item 7 in the log tree, shown before);
3) However that checksum item only covers 64Kb of data, and not 192Kb
of data;
4) As a result only the checksums for the first 64Kb of data referenced
by the file extent item are found and copied to the fs/subvolume tree.
The remaining 128Kb of data, file range 384Kb to 512Kb, doesn't get
the corresponding data checksums found and copied to the fs/subvolume
tree.
5) After replaying the log userspace will not be able to read the file
range from 384Kb to 512Kb, because the checksums are missing and
resulting in an -EIO error.
The following steps reproduce this scenario:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt/sdc
$ xfs_io -f -c "pwrite -S 0xa3 0 256K" /mnt/sdc/foobar
$ xfs_io -c "fsync" /mnt/sdc/foobar
$ xfs_io -c "pwrite -S 0xc7 256K 256K" /mnt/sdc/foobar
$ xfs_io -c "reflink /mnt/sdc/foobar 320K 0 64K" /mnt/sdc/foobar
$ xfs_io -c "fsync" /mnt/sdc/foobar
$ xfs_io -c "pwrite -S 0xe5 256K 64K" /mnt/sdc/foobar
$ xfs_io -c "fsync" /mnt/sdc/foobar
<power failure>
$ mount /dev/sdc /mnt/sdc
$ md5sum /mnt/sdc/foobar
md5sum: /mnt/sdc/foobar: Input/output error
$ dmesg | tail
[165305.003464] BTRFS info (device sdc): no csum found for inode 257 start 401408
[165305.004014] BTRFS info (device sdc): no csum found for inode 257 start 405504
[165305.004559] BTRFS info (device sdc): no csum found for inode 257 start 409600
[165305.005101] BTRFS info (device sdc): no csum found for inode 257 start 413696
[165305.005627] BTRFS info (device sdc): no csum found for inode 257 start 417792
[165305.006134] BTRFS info (device sdc): no csum found for inode 257 start 421888
[165305.006625] BTRFS info (device sdc): no csum found for inode 257 start 425984
[165305.007278] BTRFS info (device sdc): no csum found for inode 257 start 430080
[165305.008248] BTRFS warning (device sdc): csum failed root 5 ino 257 off 393216 csum 0x1337385e expected csum 0x00000000 mirror 1
[165305.009550] BTRFS warning (device sdc): csum failed root 5 ino 257 off 393216 csum 0x1337385e expected csum 0x00000000 mirror 1
Fix this simply by deleting first any checksums, from the log tree, for the
range of the extent we are logging at copy_items(). This ensures we do not
get checksum items in the log tree that have overlapping ranges.
This is a long time issue that has been present since we have the clone
(and deduplication) ioctl, and can happen both when an extent is shared
between different files and within the same file.
A test case for fstests follows soon.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The helper is trivial and we can understand what the atomic_inc on
something named refs does.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The parameter is now always set to NULL and could be dropped. The last
user was get_default_root but that got reworked in 05dbe6837b ("Btrfs:
unify subvol= and subvolid= mounting") and the parameter became unused.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
That function adds unnecessary indirection between backref_in_log and
the caller. Furthermore it also "downgrades" backref_in_log's return
value to a boolean, when in fact it could very well be an error.
Rectify the situation by simply opencoding name_in_log_ref in
replay_one_name and properly handling possible return codes from
backref_in_log.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
This function can return a negative error value if btrfs_search_slot
errors for whatever reason or if btrfs_alloc_path runs out of memory.
This is currently problemattic because backref_in_log is treated by its
callers as if it returns boolean.
Fix this by adding proper error handling in callers. That also enables
the function to return the direct error code from btrfs_search_slot.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Direct replacement, though note that the inside of the loop in
btrfs_find_name_in_backref is organized in a slightly different way but
is equvalent.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=zpDj
-----END PGP SIGNATURE-----
Merge tag 'for-5.4-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more stabitly fixes, one build warning fix.
- fix inode allocation under NOFS context
- fix leak in fiemap due to concurrent append writes
- fix log-root tree updates
- fix balance convert of single profile on 32bit architectures
- silence false positive warning on old GCCs (code moved in rc1)"
* tag 'for-5.4-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: silence maybe-uninitialized warning in clone_range
btrfs: fix uninitialized ret in ref-verify
btrfs: allocate new inode in NOFS context
btrfs: fix balance convert to single on 32-bit host CPUs
btrfs: fix incorrect updating of log root tree
Btrfs: fix memory leak due to concurrent append writes with fiemap
We've historically had reports of being unable to mount file systems
because the tree log root couldn't be read. Usually this is the "parent
transid failure", but could be any of the related errors, including
"fsid mismatch" or "bad tree block", depending on which block got
allocated.
The modification of the individual log root items are serialized on the
per-log root root_mutex. This means that any modification to the
per-subvol log root_item is completely protected.
However we update the root item in the log root tree outside of the log
root tree log_mutex. We do this in order to allow multiple subvolumes
to be updated in each log transaction.
This is problematic however because when we are writing the log root
tree out we update the super block with the _current_ log root node
information. Since these two operations happen independently of each
other, you can end up updating the log root tree in between writing out
the dirty blocks and setting the super block to point at the current
root.
This means we'll point at the new root node that hasn't been written
out, instead of the one we should be pointing at. Thus whatever garbage
or old block we end up pointing at complains when we mount the file
system later and try to replay the log.
Fix this by copying the log's root item into a local root item copy.
Then once we're safely under the log_root_tree->log_mutex we update the
root item in the log_root_tree. This way we do not modify the
log_root_tree while we're committing it, fixing the problem.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Chris Mason <clm@fb.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=bY+a
-----END PGP SIGNATURE-----
Merge tag 'for-5.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"This continues with work on code refactoring, sanity checks and space
handling. There are some less user visible changes, nothing that would
particularly stand out.
User visible changes:
- tree checker, more sanity checks of:
- ROOT_ITEM (key, size, generation, level, alignment, flags)
- EXTENT_ITEM and METADATA_ITEM checks (key, size, offset,
alignment, refs)
- tree block reference items
- EXTENT_DATA_REF (key, hash, offset)
- deprecate flag BTRFS_SUBVOL_CREATE_ASYNC for subvolume creation
ioctl, scheduled removal in 5.7
- delete stale and unused UAPI definitions
BTRFS_DEV_REPLACE_ITEM_STATE_*
- improved export of debugging information available via existing
sysfs directory structure
- try harder to delete relations between qgroups and allow to delete
orphan entries
- remove unreliable space checks before relocation starts
Core:
- space handling:
- improved ticket reservations and other high level logic in
order to remove special cases
- factor flushing infrastructure and use it for different
contexts, allows to remove some special case handling
- reduce metadata reservation when only updating inodes
- reduce global block reserve minimum size (affects small
filesystems)
- improved overcommit logic wrt global block reserve
- tests:
- fix memory leaks in extent IO tree
- catch all TRIM range
Fixes:
- fix ENOSPC errors, leading to transaction aborts, when cloning
extents
- several fixes for inode number cache (mount option inode_cache)
- fix potential soft lockups during send when traversing large trees
- fix unaligned access to space cache pages with SLUB debug on
(PowerPC)
Other:
- refactoring public/private functions, moving to new or more
appropriate files
- defines converted to enums
- error handling improvements
- more assertions and comments
- old code deletion"
* tag 'for-5.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (138 commits)
btrfs: Relinquish CPUs in btrfs_compare_trees
btrfs: Don't assign retval of btrfs_try_tree_write_lock/btrfs_tree_read_lock_atomic
btrfs: create structure to encode checksum type and length
btrfs: turn checksum type define into an enum
btrfs: add enospc debug messages for ticket failure
btrfs: do not account global reserve in can_overcommit
btrfs: use btrfs_try_granting_tickets in update_global_rsv
btrfs: always reserve our entire size for the global reserve
btrfs: change the minimum global reserve size
btrfs: rename btrfs_space_info_add_old_bytes
btrfs: remove orig_bytes from reserve_ticket
btrfs: fix may_commit_transaction to deal with no partial filling
btrfs: rework wake_all_tickets
btrfs: refactor the ticket wakeup code
btrfs: stop partially refilling tickets when releasing space
btrfs: add space reservation tracepoint for reserved bytes
btrfs: roll tracepoint into btrfs_space_info_update helper
btrfs: do not allow reservations if we have pending tickets
btrfs: stop clearing EXTENT_DIRTY in inode I/O tree
btrfs: treat RWF_{,D}SYNC writes as sync for CRCs
...
Sometimes when fsync'ing a file we need to log that other inodes exist and
when we need to do that we acquire a reference on the inodes and then drop
that reference using iput() after logging them.
That generally is not a problem except if we end up doing the final iput()
(dropping the last reference) on the inode and that inode has a link count
of 0, which can happen in a very short time window if the logging path
gets a reference on the inode while it's being unlinked.
In that case we end up getting the eviction callback, btrfs_evict_inode(),
invoked through the iput() call chain which needs to drop all of the
inode's items from its subvolume btree, and in order to do that, it needs
to join a transaction at the helper function evict_refill_and_join().
However because the task previously started a transaction at the fsync
handler, btrfs_sync_file(), it has current->journal_info already pointing
to a transaction handle and therefore evict_refill_and_join() will get
that transaction handle from btrfs_join_transaction(). From this point on,
two different problems can happen:
1) evict_refill_and_join() will often change the transaction handle's
block reserve (->block_rsv) and set its ->bytes_reserved field to a
value greater than 0. If evict_refill_and_join() never commits the
transaction, the eviction handler ends up decreasing the reference
count (->use_count) of the transaction handle through the call to
btrfs_end_transaction(), and after that point we have a transaction
handle with a NULL ->block_rsv (which is the value prior to the
transaction join from evict_refill_and_join()) and a ->bytes_reserved
value greater than 0. If after the eviction/iput completes the inode
logging path hits an error or it decides that it must fallback to a
transaction commit, the btrfs fsync handle, btrfs_sync_file(), gets a
non-zero value from btrfs_log_dentry_safe(), and because of that
non-zero value it tries to commit the transaction using a handle with
a NULL ->block_rsv and a non-zero ->bytes_reserved value. This makes
the transaction commit hit an assertion failure at
btrfs_trans_release_metadata() because ->bytes_reserved is not zero but
the ->block_rsv is NULL. The produced stack trace for that is like the
following:
[192922.917158] assertion failed: !trans->bytes_reserved, file: fs/btrfs/transaction.c, line: 816
[192922.917553] ------------[ cut here ]------------
[192922.917922] kernel BUG at fs/btrfs/ctree.h:3532!
[192922.918310] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
[192922.918666] CPU: 2 PID: 883 Comm: fsstress Tainted: G W 5.1.4-btrfs-next-47 #1
[192922.919035] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014
[192922.919801] RIP: 0010:assfail.constprop.25+0x18/0x1a [btrfs]
(...)
[192922.920925] RSP: 0018:ffffaebdc8a27da8 EFLAGS: 00010286
[192922.921315] RAX: 0000000000000051 RBX: ffff95c9c16a41c0 RCX: 0000000000000000
[192922.921692] RDX: 0000000000000000 RSI: ffff95cab6b16838 RDI: ffff95cab6b16838
[192922.922066] RBP: ffff95c9c16a41c0 R08: 0000000000000000 R09: 0000000000000000
[192922.922442] R10: ffffaebdc8a27e70 R11: 0000000000000000 R12: ffff95ca731a0980
[192922.922820] R13: 0000000000000000 R14: ffff95ca84c73338 R15: ffff95ca731a0ea8
[192922.923200] FS: 00007f337eda4e80(0000) GS:ffff95cab6b00000(0000) knlGS:0000000000000000
[192922.923579] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[192922.923948] CR2: 00007f337edad000 CR3: 00000001e00f6002 CR4: 00000000003606e0
[192922.924329] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[192922.924711] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[192922.925105] Call Trace:
[192922.925505] btrfs_trans_release_metadata+0x10c/0x170 [btrfs]
[192922.925911] btrfs_commit_transaction+0x3e/0xaf0 [btrfs]
[192922.926324] btrfs_sync_file+0x44c/0x490 [btrfs]
[192922.926731] do_fsync+0x38/0x60
[192922.927138] __x64_sys_fdatasync+0x13/0x20
[192922.927543] do_syscall_64+0x60/0x1c0
[192922.927939] entry_SYSCALL_64_after_hwframe+0x49/0xbe
(...)
[192922.934077] ---[ end trace f00808b12068168f ]---
2) If evict_refill_and_join() decides to commit the transaction, it will
be able to do it, since the nested transaction join only increments the
transaction handle's ->use_count reference counter and it does not
prevent the transaction from getting committed. This means that after
eviction completes, the fsync logging path will be using a transaction
handle that refers to an already committed transaction. What happens
when using such a stale transaction can be unpredictable, we are at
least having a use-after-free on the transaction handle itself, since
the transaction commit will call kmem_cache_free() against the handle
regardless of its ->use_count value, or we can end up silently losing
all the updates to the log tree after that iput() in the logging path,
or using a transaction handle that in the meanwhile was allocated to
another task for a new transaction, etc, pretty much unpredictable
what can happen.
In order to fix both of them, instead of using iput() during logging, use
btrfs_add_delayed_iput(), so that the logging path of fsync never drops
the last reference on an inode, that step is offloaded to a safe context
(usually the cleaner kthread).
The assertion failure issue was sporadically triggered by the test case
generic/475 from fstests, which loads the dm error target while fsstress
is running, which lead to fsync failing while logging inodes with -EIO
errors and then trying later to commit the transaction, triggering the
assertion failure.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Further simplifaction of the get/set helpers is possible when the token
is uniquely tied to an extent buffer. A condition and an assignment can
be avoided.
The initializations are moved closer to the first use when the extent
buffer is valid. There's one exception in __push_leaf_left where the
token is reused.
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_find_name_in_ext_backref returns either 0/1 depending on whether it
found a backref for the given name. If it returns true then the actual
inode_ref struct is returned in one of its parameters. That's pointless,
instead refactor the function such that it returns either a pointer
to the btrfs_inode_extref or NULL it it didn't find anything. This
streamlines the function calling convention.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_find_name_in_backref returns either 0/1 depending on whether it
found a backref for the given name. If it returns true then the actual
inode_ref struct is returned in one of its parameters. That's pointless,
instead refactor the function such that it returns either a pointer
to the btrfs_inode_ref or NULL it it didn't find anything. This
streamlines the function calling convention.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The file ctree.h serves as a header for everything and has become quite
bloated. Split some helpers that are generic and create a new file that
should be the catch-all for code that's not btrfs-specific.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Used only for in-memory state tracking.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
join_running_log_trans checks btrfs_root::log_root outside of
btrfs_root::log_mutex to avoid contention on the mutex. Turns out this
check is not necessary because the two callers of join_running_log_trans
(both of which deal with removing entries from the tree-log during
unlink) explicitly check whether the respective inode has been logged in
the current transaction.
If it hasn't then it won't have any items in the tree-log and call path
will return before calling join_running_log_trans. If the check passes,
however, then it's guaranteed that btrfs_root::log_root is set because
the inode is logged.
Those guarantees allows us to remove the speculative as well as the
implicity and tricky memory barrier.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In order to avoid searches on a log tree when unlinking an inode, we check
if the inode being unlinked was logged in the current transaction, as well
as the inode of its parent directory. When any of the inodes are logged,
we proceed to delete directory items and inode reference items from the
log, to ensure that if a subsequent fsync of only the inode being unlinked
or only of the parent directory when the other is not fsync'ed as well,
does not result in the entry still existing after a power failure.
That check however is not reliable when one of the inodes involved (the
one being unlinked or its parent directory's inode) is evicted, since the
logged_trans field is transient, that is, it is not stored on disk, so it
is lost when the inode is evicted and loaded into memory again (which is
set to zero on load). As a consequence the checks currently being done by
btrfs_del_dir_entries_in_log() and btrfs_del_inode_ref_in_log() always
return true if the inode was evicted before, regardless of the inode
having been logged or not before (and in the current transaction), this
results in the dentry being unlinked still existing after a log replay
if after the unlink operation only one of the inodes involved is fsync'ed.
Example:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ mkdir /mnt/dir
$ touch /mnt/dir/foo
$ xfs_io -c fsync /mnt/dir/foo
# Keep an open file descriptor on our directory while we evict inodes.
# We just want to evict the file's inode, the directory's inode must not
# be evicted.
$ ( cd /mnt/dir; while true; do :; done ) &
$ pid=$!
# Wait a bit to give time to background process to chdir to our test
# directory.
$ sleep 0.5
# Trigger eviction of the file's inode.
$ echo 2 > /proc/sys/vm/drop_caches
# Unlink our file and fsync the parent directory. After a power failure
# we don't expect to see the file anymore, since we fsync'ed the parent
# directory.
$ rm -f $SCRATCH_MNT/dir/foo
$ xfs_io -c fsync /mnt/dir
<power failure>
$ mount /dev/sdb /mnt
$ ls /mnt/dir
foo
$
--> file still there, unlink not persisted despite explicit fsync on dir
Fix this by checking if the inode has the full_sync bit set in its runtime
flags as well, since that bit is set everytime an inode is loaded from
disk, or for other less common cases such as after a shrinking truncate
or failure to allocate extent maps for holes, and gets cleared after the
first fsync. Also consider the inode as possibly logged only if it was
last modified in the current transaction (besides having the full_fsync
flag set).
Fixes: 3a5f1d458a ("Btrfs: Optimize btree walking while logging inodes")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we log an inode, regardless of logging it completely or only that it
exists, we always update it as logged (logged_trans and last_log_commit
fields of the inode are updated). This is generally fine and avoids future
attempts to log it from having to do repeated work that brings no value.
However, if we write data to a file, then evict its inode after all the
dealloc was flushed (and ordered extents completed), rename the file and
fsync it, we end up not logging the new extents, since the rename may
result in logging that the inode exists in case the parent directory was
logged before. The following reproducer shows and explains how this can
happen:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ mkdir /mnt/dir
$ touch /mnt/dir/foo
$ touch /mnt/dir/bar
# Do a direct IO write instead of a buffered write because with a
# buffered write we would need to make sure dealloc gets flushed and
# complete before we do the inode eviction later, and we can not do that
# from user space with call to things such as sync(2) since that results
# in a transaction commit as well.
$ xfs_io -d -c "pwrite -S 0xd3 0 4K" /mnt/dir/bar
# Keep the directory dir in use while we evict inodes. We want our file
# bar's inode to be evicted but we don't want our directory's inode to
# be evicted (if it were evicted too, we would not be able to reproduce
# the issue since the first fsync below, of file foo, would result in a
# transaction commit.
$ ( cd /mnt/dir; while true; do :; done ) &
$ pid=$!
# Wait a bit to give time for the background process to chdir.
$ sleep 0.1
# Evict all inodes, except the inode for the directory dir because it is
# currently in use by our background process.
$ echo 2 > /proc/sys/vm/drop_caches
# fsync file foo, which ends up persisting information about the parent
# directory because it is a new inode.
$ xfs_io -c fsync /mnt/dir/foo
# Rename bar, this results in logging that this inode exists (inode item,
# names, xattrs) because the parent directory is in the log.
$ mv /mnt/dir/bar /mnt/dir/baz
# Now fsync baz, which ends up doing absolutely nothing because of the
# rename operation which logged that the inode exists only.
$ xfs_io -c fsync /mnt/dir/baz
<power failure>
$ mount /dev/sdb /mnt
$ od -t x1 -A d /mnt/dir/baz
0000000
--> Empty file, data we wrote is missing.
Fix this by not updating last_sub_trans of an inode when we are logging
only that it exists and the inode was not yet logged since it was loaded
from disk (full_sync bit set), this is enough to make btrfs_inode_in_log()
return false for this scenario and make us log the inode. The logged_trans
of the inode is still always setsince that alone is used to track if names
need to be deleted as part of unlink operations.
Fixes: 257c62e1bc ("Btrfs: avoid tree log commit when there are no changes")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When syncing the log, the final phase of a fsync operation, we need to
either create a log root's item or update the existing item in the log
tree of log roots, and that depends on the current value of the log
root's log_transid - if it's 1 we need to create the log root item,
otherwise it must exist already and we update it. Since there is no
synchronization between updating the log_transid and checking it for
deciding whether the log root's item needs to be created or updated, we
end up with a tiny race window that results in attempts to update the
item to fail because the item was not yet created:
CPU 1 CPU 2
btrfs_sync_log()
lock root->log_mutex
set log root's log_transid to 1
unlock root->log_mutex
btrfs_sync_log()
lock root->log_mutex
sets log root's
log_transid to 2
unlock root->log_mutex
update_log_root()
sees log root's log_transid
with a value of 2
calls btrfs_update_root(),
which fails with -EUCLEAN
and causes transaction abort
Until recently the race lead to a BUG_ON at btrfs_update_root(), but after
the recent commit 7ac1e464c4 ("btrfs: Don't panic when we can't find a
root key") we just abort the current transaction.
A sample trace of the BUG_ON() on a SLE12 kernel:
------------[ cut here ]------------
kernel BUG at ../fs/btrfs/root-tree.c:157!
Oops: Exception in kernel mode, sig: 5 [#1]
SMP NR_CPUS=2048 NUMA pSeries
(...)
Supported: Yes, External
CPU: 78 PID: 76303 Comm: rtas_errd Tainted: G X 4.4.156-94.57-default #1
task: c00000ffa906d010 ti: c00000ff42b08000 task.ti: c00000ff42b08000
NIP: d000000036ae5cdc LR: d000000036ae5cd8 CTR: 0000000000000000
REGS: c00000ff42b0b860 TRAP: 0700 Tainted: G X (4.4.156-94.57-default)
MSR: 8000000002029033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 22444484 XER: 20000000
CFAR: d000000036aba66c SOFTE: 1
GPR00: d000000036ae5cd8 c00000ff42b0bae0 d000000036bda220 0000000000000054
GPR04: 0000000000000001 0000000000000000 c00007ffff8d37c8 0000000000000000
GPR08: c000000000e19c00 0000000000000000 0000000000000000 3736343438312079
GPR12: 3930373337303434 c000000007a3a800 00000000007fffff 0000000000000023
GPR16: c00000ffa9d26028 c00000ffa9d261f8 0000000000000010 c00000ffa9d2ab28
GPR20: c00000ff42b0bc48 0000000000000001 c00000ff9f0d9888 0000000000000001
GPR24: c00000ffa9d26000 c00000ffa9d261e8 c00000ffa9d2a800 c00000ff9f0d9888
GPR28: c00000ffa9d26028 c00000ffa9d2aa98 0000000000000001 c00000ffa98f5b20
NIP [d000000036ae5cdc] btrfs_update_root+0x25c/0x4e0 [btrfs]
LR [d000000036ae5cd8] btrfs_update_root+0x258/0x4e0 [btrfs]
Call Trace:
[c00000ff42b0bae0] [d000000036ae5cd8] btrfs_update_root+0x258/0x4e0 [btrfs] (unreliable)
[c00000ff42b0bba0] [d000000036b53610] btrfs_sync_log+0x2d0/0xc60 [btrfs]
[c00000ff42b0bce0] [d000000036b1785c] btrfs_sync_file+0x44c/0x4e0 [btrfs]
[c00000ff42b0bd80] [c00000000032e300] vfs_fsync_range+0x70/0x120
[c00000ff42b0bdd0] [c00000000032e44c] do_fsync+0x5c/0xb0
[c00000ff42b0be10] [c00000000032e8dc] SyS_fdatasync+0x2c/0x40
[c00000ff42b0be30] [c000000000009488] system_call+0x3c/0x100
Instruction dump:
7f43d378 4bffebb9 60000000 88d90008 3d220000 e8b90000 3b390009 e87a01f0
e8898e08 e8f90000 4bfd48e5 60000000 <0fe00000> e95b0060 39200004 394a0ea0
---[ end trace 8f2dc8f919cabab8 ]---
So fix this by doing the check of log_transid and updating or creating the
log root's item while holding the root's log_mutex.
Fixes: 7237f18336 ("Btrfs: fix tree logs parallel sync")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While logging an inode we follow its ancestors and for each one we mark
it as logged in the current transaction, even if we have not logged it.
As a consequence if we change an attribute of an ancestor, such as the
UID or GID for example, and then explicitly fsync it, we end up not
logging the inode at all despite returning success to user space, which
results in the attribute being lost if a power failure happens after
the fsync.
Sample reproducer:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ mkdir /mnt/dir
$ chown 6007:6007 /mnt/dir
$ sync
$ chown 9003:9003 /mnt/dir
$ touch /mnt/dir/file
$ xfs_io -c fsync /mnt/dir/file
# fsync our directory after fsync'ing the new file, should persist the
# new values for the uid and gid.
$ xfs_io -c fsync /mnt/dir
<power failure>
$ mount /dev/sdb /mnt
$ stat -c %u:%g /mnt/dir
6007:6007
--> should be 9003:9003, the uid and gid were not persisted, despite
the explicit fsync on the directory prior to the power failure
Fix this by not updating the logged_trans field of ancestor inodes when
logging an inode, since we have not logged them. Let only future calls to
btrfs_log_inode() to mark inodes as logged.
This could be triggered by my recent fsync fuzz tester for fstests, for
which an fstests patch exists titled "fstests: generic, fsync fuzz tester
with fsstress".
Fixes: 12fcfd22fe ("Btrfs: tree logging unlink/rename fixes")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we are doing a full fsync (bit BTRFS_INODE_NEEDS_FULL_SYNC set) of a
file that has holes and has file extent items spanning two or more leafs,
we can end up falling to back to a full transaction commit due to a logic
bug that leads to failure to insert a duplicate file extent item that is
meant to represent a hole between the last file extent item of a leaf and
the first file extent item in the next leaf. The failure (EEXIST error)
leads to a transaction commit (as most errors when logging an inode do).
For example, we have the two following leafs:
Leaf N:
-----------------------------------------------
| ..., ..., ..., (257, FILE_EXTENT_ITEM, 64K) |
-----------------------------------------------
The file extent item at the end of leaf N has a length of 4Kb,
representing the file range from 64K to 68K - 1.
Leaf N + 1:
-----------------------------------------------
| (257, FILE_EXTENT_ITEM, 72K), ..., ..., ... |
-----------------------------------------------
The file extent item at the first slot of leaf N + 1 has a length of
4Kb too, representing the file range from 72K to 76K - 1.
During the full fsync path, when we are at tree-log.c:copy_items() with
leaf N as a parameter, after processing the last file extent item, that
represents the extent at offset 64K, we take a look at the first file
extent item at the next leaf (leaf N + 1), and notice there's a 4K hole
between the two extents, and therefore we insert a file extent item
representing that hole, starting at file offset 68K and ending at offset
72K - 1. However we don't update the value of *last_extent, which is used
to represent the end offset (plus 1, non-inclusive end) of the last file
extent item inserted in the log, so it stays with a value of 68K and not
with a value of 72K.
Then, when copy_items() is called for leaf N + 1, because the value of
*last_extent is smaller then the offset of the first extent item in the
leaf (68K < 72K), we look at the last file extent item in the previous
leaf (leaf N) and see it there's a 4K gap between it and our first file
extent item (again, 68K < 72K), so we decide to insert a file extent item
representing the hole, starting at file offset 68K and ending at offset
72K - 1, this insertion will fail with -EEXIST being returned from
btrfs_insert_file_extent() because we already inserted a file extent item
representing a hole for this offset (68K) in the previous call to
copy_items(), when processing leaf N.
The -EEXIST error gets propagated to the fsync callback, btrfs_sync_file(),
which falls back to a full transaction commit.
Fix this by adjusting *last_extent after inserting a hole when we had to
look at the next leaf.
Fixes: 4ee3fad34a ("Btrfs: fix fsync after hole punching when using no-holes feature")
Cc: stable@vger.kernel.org # 4.14+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 41bd606769 ("Btrfs: fix fsync of files with multiple hard links
in new directories") introduced a path that makes fsync fallback to a full
transaction commit in order to avoid losing hard links and new ancestors
of the fsynced inode. That path is triggered only when the inode has more
than one hard link and either has a new hard link created in the current
transaction or the inode was evicted and reloaded in the current
transaction.
That path ends up getting triggered very often (hundreds of times) during
the course of pgbench benchmarks, resulting in performance drops of about
20%.
This change restores the performance by not triggering the full transaction
commit in those cases, and instead iterate the fs/subvolume tree in search
of all possible new ancestors, for all hard links, to log them.
Reported-by: Zhao Yuhu <zyuhu@suse.com>
Tested-by: James Wang <jnwang@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the new btrfs_ref structure and replace parameter list to clean up
the usage of owner and level to distinguish the extent types.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The wrapper names better describe what's happening so they're not
deleted though they're trivial, but at least moved closer to their place
of use.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Back in commit a89ca6f24f ("Btrfs: fix fsync after truncate when
no_holes feature is enabled") I added an assertion that is triggered when
an inline extent is found to assert that the length of the (uncompressed)
data the extent represents is the same as the i_size of the inode, since
that is true most of the time I couldn't find or didn't remembered about
any exception at that time. Later on the assertion was expanded twice to
deal with a case of a compressed inline extent representing a range that
matches the sector size followed by an expanding truncate, and another
case where fallocate can update the i_size of the inode without adding
or updating existing extents (if the fallocate range falls entirely within
the first block of the file). These two expansion/fixes of the assertion
were done by commit 7ed586d0a8 ("Btrfs: fix assertion on fsync of
regular file when using no-holes feature") and commit 6399fb5a0b
("Btrfs: fix assertion failure during fsync in no-holes mode").
These however missed the case where an falloc expands the i_size of an
inode to exactly the sector size and inline extent exists, for example:
$ mkfs.btrfs -f -O no-holes /dev/sdc
$ mount /dev/sdc /mnt
$ xfs_io -f -c "pwrite -S 0xab 0 1096" /mnt/foobar
wrote 1096/1096 bytes at offset 0
1 KiB, 1 ops; 0.0002 sec (4.448 MiB/sec and 4255.3191 ops/sec)
$ xfs_io -c "falloc 1096 3000" /mnt/foobar
$ xfs_io -c "fsync" /mnt/foobar
Segmentation fault
$ dmesg
[701253.602385] assertion failed: len == i_size || (len == fs_info->sectorsize && btrfs_file_extent_compression(leaf, extent) != BTRFS_COMPRESS_NONE) || (len < i_size && i_size < fs_info->sectorsize), file: fs/btrfs/tree-log.c, line: 4727
[701253.602962] ------------[ cut here ]------------
[701253.603224] kernel BUG at fs/btrfs/ctree.h:3533!
[701253.603503] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
[701253.603774] CPU: 2 PID: 7192 Comm: xfs_io Tainted: G W 5.0.0-rc8-btrfs-next-45 #1
[701253.604054] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014
[701253.604650] RIP: 0010:assfail.constprop.23+0x18/0x1a [btrfs]
(...)
[701253.605591] RSP: 0018:ffffbb48c186bc48 EFLAGS: 00010286
[701253.605914] RAX: 00000000000000de RBX: ffff921d0a7afc08 RCX: 0000000000000000
[701253.606244] RDX: 0000000000000000 RSI: ffff921d36b16868 RDI: ffff921d36b16868
[701253.606580] RBP: ffffbb48c186bcf0 R08: 0000000000000000 R09: 0000000000000000
[701253.606913] R10: 0000000000000003 R11: 0000000000000000 R12: ffff921d05d2de18
[701253.607247] R13: ffff921d03b54000 R14: 0000000000000448 R15: ffff921d059ecf80
[701253.607769] FS: 00007f14da906700(0000) GS:ffff921d36b00000(0000) knlGS:0000000000000000
[701253.608163] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[701253.608516] CR2: 000056087ea9f278 CR3: 00000002268e8001 CR4: 00000000003606e0
[701253.608880] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[701253.609250] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[701253.609608] Call Trace:
[701253.609994] btrfs_log_inode+0xdfb/0xe40 [btrfs]
[701253.610383] btrfs_log_inode_parent+0x2be/0xa60 [btrfs]
[701253.610770] ? do_raw_spin_unlock+0x49/0xc0
[701253.611150] btrfs_log_dentry_safe+0x4a/0x70 [btrfs]
[701253.611537] btrfs_sync_file+0x3b2/0x440 [btrfs]
[701253.612010] ? do_sysinfo+0xb0/0xf0
[701253.612552] do_fsync+0x38/0x60
[701253.612988] __x64_sys_fsync+0x10/0x20
[701253.613360] do_syscall_64+0x60/0x1b0
[701253.613733] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[701253.614103] RIP: 0033:0x7f14da4e66d0
(...)
[701253.615250] RSP: 002b:00007fffa670fdb8 EFLAGS: 00000246 ORIG_RAX: 000000000000004a
[701253.615647] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f14da4e66d0
[701253.616047] RDX: 000056087ea9c260 RSI: 000056087ea9c260 RDI: 0000000000000003
[701253.616450] RBP: 0000000000000001 R08: 0000000000000020 R09: 0000000000000010
[701253.616854] R10: 000000000000009b R11: 0000000000000246 R12: 000056087ea9c260
[701253.617257] R13: 000056087ea9c240 R14: 0000000000000000 R15: 000056087ea9dd10
(...)
[701253.619941] ---[ end trace e088d74f132b6da5 ]---
Updating the assertion again to allow for this particular case would result
in a meaningless assertion, plus there is currently no risk of logging
content that would result in any corruption after a log replay if the size
of the data encoded in an inline extent is greater than the inode's i_size
(which is not currently possibe either with or without compression),
therefore just remove the assertion.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When Filipe added the recursive directory logging stuff in
2f2ff0ee5e ("Btrfs: fix metadata inconsistencies after directory
fsync") he specifically didn't take the directory i_mutex for the
children directories that we need to log because of lockdep. This is
generally fine, but can lead to this WARN_ON() tripping if we happen to
run delayed deletion's in between our first search and our second search
of dir_item/dir_indexes for this directory. We expect this to happen,
so the WARN_ON() isn't necessary. Drop the WARN_ON() and add a comment
so we know why this case can happen.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we do a shrinking truncate against an inode which is already present
in the respective log tree and then rename it, as part of logging the new
name we end up logging an inode item that reflects the old size of the
file (the one which we previously logged) and not the new smaller size.
The decision to preserve the size previously logged was added by commit
1a4bcf470c ("Btrfs: fix fsync data loss after adding hard link to
inode") in order to avoid data loss after replaying the log. However that
decision is only needed for the case the logged inode size is smaller then
the current size of the inode, as explained in that commit's change log.
If the current size of the inode is smaller then the previously logged
size, we know a shrinking truncate happened and therefore need to use
that smaller size.
Example to trigger the problem:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ xfs_io -f -c "pwrite -S 0xab 0 8000" /mnt/foo
$ xfs_io -c "fsync" /mnt/foo
$ xfs_io -c "truncate 3000" /mnt/foo
$ mv /mnt/foo /mnt/bar
$ xfs_io -c "fsync" /mnt/bar
<power failure>
$ mount /dev/sdb /mnt
$ od -t x1 -A d /mnt/bar
0000000 ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab
*
0008000
Once we rename the file, we log its name (and inode item), and because
the inode was already logged before in the current transaction, we log it
with a size of 8000 bytes because that is the size we previously logged
(with the first fsync). As part of the rename, besides logging the inode,
we do also sync the log, which is done since commit d4682ba03e
("Btrfs: sync log after logging new name"), so the next fsync against our
inode is effectively a no-op, since no new changes happened since the
rename operation. Even if did not sync the log during the rename
operation, the same problem (fize size of 8000 bytes instead of 3000
bytes) would be visible after replaying the log if the log ended up
getting synced to disk through some other means, such as for example by
fsyncing some other modified file. In the example above the fsync after
the rename operation is there just because not every filesystem may
guarantee logging/journalling the inode (and syncing the log/journal)
during the rename operation, for example it is needed for f2fs, but not
for ext4 and xfs.
Fix this scenario by, when logging a new name (which is triggered by
rename and link operations), using the current size of the inode instead
of the previously logged inode size.
A test case for fstests follows soon.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202695
CC: stable@vger.kernel.org # 4.4+
Reported-by: Seulbae Kim <seulbae@gatech.edu>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The function map_private_extent_buffer() can return an -EINVAL error, and
it is called by generic_bin_search() which will return back the error. The
btrfs_bin_search() function in turn calls generic_bin_search() and the
key_search() function calls btrfs_bin_search(), so both can return the
-EINVAL error coming from the map_private_extent_buffer() function. Some
callers of these functions were ignoring that these functions can return
an error, so fix them to deal with error return values.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
After a succession of renames operations of different files and unlinking
one of them, if we fsync one of the renamed files we can end up with a
log that will either fail to replay at mount time or result in a filesystem
that is in an inconsistent state. One example scenario:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ mkdir /mnt/testdir
$ touch /mnt/testdir/fname1
$ touch /mnt/testdir/fname2
$ sync
$ mv /mnt/testdir/fname1 /mnt/testdir/fname3
$ rm -f /mnt/testdir/fname2
$ ln /mnt/testdir/fname3 /mnt/testdir/fname2
$ touch /mnt/testdir/fname1
$ xfs_io -c "fsync" /mnt/testdir/fname1
<power failure>
$ mount /dev/sdb /mnt
$ umount /mnt
$ btrfs check /dev/sdb
[1/7] checking root items
[2/7] checking extents
[3/7] checking free space cache
[4/7] checking fs roots
root 5 inode 259 errors 2, no orphan item
ERROR: errors found in fs roots
Opening filesystem to check...
Checking filesystem on /dev/sdc
UUID: 20e4abb8-5a19-4492-8bb4-6084125c2d0d
found 393216 bytes used, error(s) found
total csum bytes: 0
total tree bytes: 131072
total fs tree bytes: 32768
total extent tree bytes: 16384
btree space waste bytes: 122986
file data blocks allocated: 262144
referenced 262144
On a kernel without the first patch in this series, titled
"[PATCH] Btrfs: fix fsync after succession of renames of different files",
we get instead an error when mounting the filesystem due to failure of
replaying the log:
$ mount /dev/sdb /mnt
mount: mount /dev/sdb on /mnt failed: File exists
Fix this by logging the parent directory of an inode whenever we find an
inode that no longer exists (was unlinked in the current transaction),
during the procedure which finds inodes that have old names that collide
with new names of other inodes.
A test case for fstests follows soon.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
After a succession of rename operations of different files and fsyncing
one of them, such that each file gets a new name that corresponds to an
old name of another file, we can end up with a log that will cause a
failure when attempted to replay at mount time (an EEXIST error).
We currently have correct behaviour when such succession of renames
involves only two files, but if there are more files involved, we end up
not logging all the inodes that are needed, therefore resulting in a
failure when attempting to replay the log.
Example:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ mkdir /mnt/testdir
$ touch /mnt/testdir/fname1
$ touch /mnt/testdir/fname2
$ sync
$ mv /mnt/testdir/fname1 /mnt/testdir/fname3
$ mv /mnt/testdir/fname2 /mnt/testdir/fname4
$ ln /mnt/testdir/fname3 /mnt/testdir/fname2
$ touch /mnt/testdir/fname1
$ xfs_io -c "fsync" /mnt/testdir/fname1
<power failure>
$ mount /dev/sdb /mnt
mount: mount /dev/sdb on /mnt failed: File exists
So fix this by checking all inode dependencies when logging an inode. That
is, if one logged inode A has a new name that matches the old name of some
other inode B, check if inode B has a new name that matches the old name
of some other inode C, and so on. This fix is implemented not by doing any
recursive function calls but by using an iterative method using a linked
list that is used in a first-in-first-out fashion.
A test case for fstests follows soon.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_set_lock_blocking is now only a simple wrapper around
btrfs_set_lock_blocking_write. The name does not bring any semantic
value that could not be inferred from the new function so there's no
point keeping it.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
The typos accumulate over time so once in a while time they get fixed in
a large patch.
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The log tree has a long standing problem that when a file is fsync'ed we
only check for new ancestors, created in the current transaction, by
following only the hard link for which the fsync was issued. We follow the
ancestors using the VFS' dget_parent() API. This means that if we create a
new link for a file in a directory that is new (or in an any other new
ancestor directory) and then fsync the file using an old hard link, we end
up not logging the new ancestor, and on log replay that new hard link and
ancestor do not exist. In some cases, involving renames, the file will not
exist at all.
Example:
mkfs.btrfs -f /dev/sdb
mount /dev/sdb /mnt
mkdir /mnt/A
touch /mnt/foo
ln /mnt/foo /mnt/A/bar
xfs_io -c fsync /mnt/foo
<power failure>
In this example after log replay only the hard link named 'foo' exists
and directory A does not exist, which is unexpected. In other major linux
filesystems, such as ext4, xfs and f2fs for example, both hard links exist
and so does directory A after mounting again the filesystem.
Checking if any new ancestors are new and need to be logged was added in
2009 by commit 12fcfd22fe ("Btrfs: tree logging unlink/rename fixes"),
however only for the ancestors of the hard link (dentry) for which the
fsync was issued, instead of checking for all ancestors for all of the
inode's hard links.
So fix this by tracking the id of the last transaction where a hard link
was created for an inode and then on fsync fallback to a full transaction
commit when an inode has more than one hard link and at least one new hard
link was created in the current transaction. This is the simplest solution
since this is not a common use case (adding frequently hard links for
which there's an ancestor created in the current transaction and then
fsync the file). In case it ever becomes a common use case, a solution
that consists of iterating the fs/subvol btree for each hard link and
check if any ancestor is new, could be implemented.
This solves many unexpected scenarios reported by Jayashree Mohan and
Vijay Chidambaram, and for which there is a new test case for fstests
under review.
Fixes: 12fcfd22fe ("Btrfs: tree logging unlink/rename fixes")
CC: stable@vger.kernel.org # 4.4+
Reported-by: Vijay Chidambaram <vvijay03@gmail.com>
Reported-by: Jayashree Mohan <jayashree2912@gmail.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We currently are in a loop finding each range (corresponding to a btree
node/leaf) in a log root's extent io tree and then clean it up. This is a
waste of time since we are traversing the extent io tree's rb_tree more
times then needed (one for a range lookup and another for cleaning it up)
without any good reason.
We free the log trees when we are in the critical section of a transaction
commit (the transaction state is set to TRANS_STATE_COMMIT_DOING), so it's
of great convenience to do everything as fast as possible in order to
reduce the time we block other tasks from starting a new transaction.
So fix this by traversing the extent io tree once and cleaning up all its
records in one go while traversing it.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The logged_start and logged_end variables, at btrfs_log_changed_extents,
were added in commit 8c6c592831 ("btrfs: log csums for all modified
extents"). However since the recent simplification for fsync, which makes
us wait for all ordered extents to complete before logging extents, we
no longer need those variables. Commit a2120a473a ("btrfs: clean up the
left over logged_list usage") forgot to remove them.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Recently we got a massive simplification for fsync, where for the fast
path we no longer log new extents while their respective ordered extents
are still running.
However that simplification introduced a subtle regression for the case
where we use a ranged fsync (msync). Consider the following example:
CPU 0 CPU 1
mmap write to range [2Mb, 4Mb[
mmap write to range [512Kb, 1Mb[
msync range [512K, 1Mb[
--> triggers fast fsync
(BTRFS_INODE_NEEDS_FULL_SYNC
not set)
--> creates extent map A for this
range and adds it to list of
modified extents
--> starts ordered extent A for
this range
--> waits for it to complete
writeback triggered for range
[2Mb, 4Mb[
--> create extent map B and
adds it to the list of
modified extents
--> creates ordered extent B
--> start looking for and logging
modified extents
--> logs extent maps A and B
--> finds checksums for extent A
in the csum tree, but not for
extent B
fsync (msync) finishes
--> ordered extent B
finishes and its
checksums are added
to the csum tree
<power cut>
After replaying the log, we have the extent covering the range [2Mb, 4Mb[
but do not have the data checksum items covering that file range.
This happens because at the very beginning of an fsync (btrfs_sync_file())
we start and wait for IO in the given range [512Kb, 1Mb[ and therefore
wait for any ordered extents in that range to complete before we start
logging the extents. However if right before we start logging the extent
in our range [512Kb, 1Mb[, writeback is started for any other dirty range,
such as the range [2Mb, 4Mb[ due to memory pressure or a concurrent fsync
or msync (btrfs_sync_file() starts writeback before acquiring the inode's
lock), an ordered extent is created for that other range and a new extent
map is created to represent that range and added to the inode's list of
modified extents.
That means that we will see that other extent in that list when collecting
extents for logging (done at btrfs_log_changed_extents()) and log the
extent before the respective ordered extent finishes - namely before the
checksum items are added to the checksums tree, which is where
log_extent_csums() looks for the checksums, therefore making us log an
extent without logging its checksums. Before that massive simplification
of fsync, this wasn't a problem because besides looking for checkums in
the checksums tree, we also looked for them in any ordered extent still
running.
The consequence of data checksums missing for a file range is that users
attempting to read the affected file range will get -EIO errors and dmesg
reports the following:
[10188.358136] BTRFS info (device sdc): no csum found for inode 297 start 57344
[10188.359278] BTRFS warning (device sdc): csum failed root 5 ino 297 off 57344 csum 0x98f94189 expected csum 0x00000000 mirror 1
So fix this by skipping extents outside of our logging range at
btrfs_log_changed_extents() and leaving them on the list of modified
extents so that any subsequent ranged fsync may collect them if needed.
Also, if we find a hole extent outside of the range still log it, just
to prevent having gaps between extent items after replaying the log,
otherwise fsck will complain when we are not using the NO_HOLES feature
(fstest btrfs/056 triggers such case).
Fixes: e7175a6927 ("btrfs: remove the wait ordered logic in the log_one_extent path")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana