Commit Graph

797120 Commits

Author SHA1 Message Date
Vignesh R 350784e792 MAINTAINERS: Add entry for i2c-omap driver
Add separate entry for i2c-omap and add my name as maintainer for this
driver.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-11-09 17:25:48 +01:00
Vignesh R 5b277402de i2c: omap: Enable for ARCH_K3
Allow I2C_OMAP to be built for K3 platforms.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-11-09 17:25:29 +01:00
Vignesh R ab214c4838 dt-bindings: i2c: omap: Add new compatible for AM654 SoCs
AM654 SoCs have same I2C IP as OMAP SoCs. Add new compatible to
handle AM654 SoCs. While at that reformat the existing compatible list
for older SoCs to list one valid compatible per line.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-11-09 17:25:21 +01:00
Juergen Gross 3941552aec xen: remove size limit of privcmd-buf mapping interface
Currently the size of hypercall buffers allocated via
/dev/xen/hypercall is limited to a default of 64 memory pages. For live
migration of guests this might be too small as the page dirty bitmask
needs to be sized according to the size of the guest. This means
migrating a 8GB sized guest is already exhausting the default buffer
size for the dirty bitmap.

There is no sensible way to set a sane limit, so just remove it
completely. The device node's usage is limited to root anyway, so there
is no additional DOS scenario added by allowing unlimited buffers.

While at it make the error path for the -ENOMEM case a little bit
cleaner by setting n_pages to the number of successfully allocated
pages instead of the target size.

Fixes: c51b3c639e ("xen: add new hypercall buffer mapping device")
Cc: <stable@vger.kernel.org> #4.18
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
2018-11-09 16:38:34 +01:00
Juergen Gross d3132b3860 xen: fix xen_qlock_wait()
Commit a856531951 ("xen: make xen_qlock_wait() nestable")
introduced a regression for Xen guests running fully virtualized
(HVM or PVH mode). The Xen hypervisor wouldn't return from the poll
hypercall with interrupts disabled in case of an interrupt (for PV
guests it does).

So instead of disabling interrupts in xen_qlock_wait() use a nesting
counter to avoid calling xen_clear_irq_pending() in case
xen_qlock_wait() is nested.

Fixes: a856531951 ("xen: make xen_qlock_wait() nestable")
Cc: stable@vger.kernel.org
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Juergen Gross <jgross@suse.com>
2018-11-09 16:37:27 +01:00
Ming Lei 34ffec60b2 block: make sure writesame bio is aligned with logical block size
Obviously the created writesame bio has to be aligned with logical block
size, and use bio_allowed_max_sectors() to retrieve this number.

Cc: stable@vger.kernel.org
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Xiao Ni <xni@redhat.com>
Cc: Mariusz Dabrowski <mariusz.dabrowski@intel.com>
Fixes: b49a0871be ("block: remove split code in blkdev_issue_{discard,write_same}")
Tested-by: Rui Salvaterra <rsalvaterra@gmail.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-09 06:23:18 -07:00
Ming Lei ba5d73851e block: cleanup __blkdev_issue_discard()
Cleanup __blkdev_issue_discard() a bit:

- remove local variable of 'end_sect'
- remove code block of 'fail'

Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Xiao Ni <xni@redhat.com>
Cc: Mariusz Dabrowski <mariusz.dabrowski@intel.com>
Tested-by: Rui Salvaterra <rsalvaterra@gmail.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-09 06:23:16 -07:00
Ming Lei 1adfc5e413 block: make sure discard bio is aligned with logical block size
Obviously the created discard bio has to be aligned with logical block size.

This patch introduces the helper of bio_allowed_max_sectors() for
this purpose.

Cc: stable@vger.kernel.org
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Xiao Ni <xni@redhat.com>
Cc: Mariusz Dabrowski <mariusz.dabrowski@intel.com>
Fixes: 744889b7cb ("block: don't deal with discard limit in blkdev_issue_discard()")
Fixes: a22c4d7e34 ("block: re-add discard_granularity and alignment checks")
Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
Tested-by: Rui Salvaterra <rsalvaterra@gmail.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-09 06:23:14 -07:00
Christoph Hellwig d39aa49792 Revert "nvmet-rdma: use a private workqueue for delete"
This reverts commit 2acf70ade7.

The commit never really fixed the intended issue and caused all
kinds of other issues, including a use before initialization.

Suggested-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-09 06:14:47 -07:00
Sagi Grimberg 8f676b8508 nvme: make sure ns head inherits underlying device limits
Whenever we update ns_head info, we need to make sure it is still
compatible with all underlying backing devices because although nvme
multipath doesn't have any explicit use of these limits, other devices
can still be stacked on top of it which may rely on the underlying limits.
Start with unlimited stacking limits, and every info update iterate over
siblings and adjust queue limits.

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-09 06:14:47 -07:00
Sagi Grimberg 21d3bbdd4c nvmet: don't try to add ns to p2p map unless it actually uses it
Even without CONFIG_P2PDMA this results in a error print:
nvmet: no peer-to-peer memory is available that's supported by rxe0 and /dev/nullb0

Fixes: c6925093d0 ("nvmet: Optionally use PCI P2P memory")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-09 06:14:47 -07:00
Linus Torvalds 3541833fd1 s390 updates for 4.20-rc2
- A fix for the pgtable_bytes misaccounting on s390. The patch changes
    common code part in regard to page table folding and adds extra
    checks to mm_[inc|dec]_nr_[pmds|puds].
 
  - Add FORCE for all build targets using if_changed
 
  - Use non-loadable phdr for the .vmlinux.info section to avoid
    a segment overlap that confuses kexec
 
  - Cleanup the attribute definition for the diagnostic sampling
 
  - Increase stack size for CONFIG_KASAN=y builds
 
  - Export __node_distance to fix a build error
 
  - Correct return code of a PMU event init function
 
  - An update for the default configs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABCAAGBQJb5TIMAAoJEDjwexyKj9rgIH8H/0daZTyxcLwY9gbigaq1Qs4R
 /ScmAJJc2U/Qj8b9UskhsmHAUuAufF2oljU16SquP7CBGhtkLRrjPtdh1AMiiZGM
 reVF7X5LU8MH0QUoNnKPWAL4DD1q2E99IAEH5TeGIODUG6srqvIHBNtXDWNLPtBf
 fpOhJ/NssgxyuYUXi/WnoEjIyP8KABeG6SlpcLzYbmY1hUOIXcixuv39UrL0G5OO
 P8ciL+W5rTcPZCnpJ1Xk9hKploT8gWXhMT5QhNnakgMF/25v80+TZy5xRZMuLAmQ
 T5SFP6B71o05nLK7fLi3VAIKPv/QibjiyJOEf9uUHdo1XZcD5uRu0EQ/LklLUBU=
 =4H06
 -----END PGP SIGNATURE-----

Merge tag 's390-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 fixes from Martin Schwidefsky:

 - A fix for the pgtable_bytes misaccounting on s390. The patch changes
   common code part in regard to page table folding and adds extra
   checks to mm_[inc|dec]_nr_[pmds|puds].

 - Add FORCE for all build targets using if_changed

 - Use non-loadable phdr for the .vmlinux.info section to avoid a
   segment overlap that confuses kexec

 - Cleanup the attribute definition for the diagnostic sampling

 - Increase stack size for CONFIG_KASAN=y builds

 - Export __node_distance to fix a build error

 - Correct return code of a PMU event init function

 - An update for the default configs

* tag 's390-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/perf: Change CPUM_CF return code in event init function
  s390: update defconfigs
  s390/mm: Fix ERROR: "__node_distance" undefined!
  s390/kasan: increase instrumented stack size to 64k
  s390/cpum_sf: Rework attribute definition for diagnostic sampling
  s390/mm: fix mis-accounting of pgtable_bytes
  mm: add mm_pxd_folded checks to pgtable_bytes accounting functions
  mm: introduce mm_[p4d|pud|pmd]_folded
  mm: make the __PAGETABLE_PxD_FOLDED defines non-empty
  s390: avoid vmlinux segments overlap
  s390/vdso: add missing FORCE to build targets
  s390/decompressor: add missing FORCE to build targets
2018-11-09 06:30:44 -06:00
Juergen Gross 1457d8cf76 x86/xen: fix pv boot
Commit 9da3f2b740 ("x86/fault: BUG() when uaccess helpers fault on
kernel addresses") introduced a regression for booting Xen PV guests.

Xen PV guests are using __put_user() and __get_user() for accessing the
p2m map (physical to machine frame number map) as accesses might fail
in case of not populated areas of the map.

With above commit using __put_user() and __get_user() for accessing
kernel pages is no longer valid. So replace the Xen hack by adding
appropriate p2m access functions using the default fixup handler.

Fixes: 9da3f2b740 ("x86/fault: BUG() when uaccess helpers fault on kernel addresses")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
2018-11-09 08:16:55 +01:00
Stefan Wahren 85b18b0237 net: smsc95xx: Fix MTU range
The commit f77f0aee4d ("net: use core MTU range checking in USB NIC
drivers") introduce a common MTU handling for usbnet. But it's missing
the necessary changes for smsc95xx. So set the MTU range accordingly.

This patch has been tested on a Raspberry Pi 3.

Fixes: f77f0aee4d ("net: use core MTU range checking in USB NIC drivers")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08 19:54:49 -08:00
Thor Thayer 8137b6ef0c net: stmmac: Fix RX packet size > 8191
Ping problems with packets > 8191 as shown:

PING 192.168.1.99 (192.168.1.99) 8150(8178) bytes of data.
8158 bytes from 192.168.1.99: icmp_seq=1 ttl=64 time=0.669 ms
wrong data byte 8144 should be 0xd0 but was 0x0
16    10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f
      20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f
%< ---------------snip--------------------------------------
8112  b0 b1 b2 b3 b4 b5 b6 b7 b8 b9 ba bb bc bd be bf
      c0 c1 c2 c3 c4 c5 c6 c7 c8 c9 ca cb cc cd ce cf
8144  0 0 0 0 d0 d1
      ^^^^^^^
Notice the 4 bytes of 0 before the expected byte of d0.

Databook notes that the RX buffer must be a multiple of 4/8/16
bytes [1].

Update the DMA Buffer size define to 8188 instead of 8192. Remove
the -1 from the RX buffer size allocations and use the new
DMA Buffer size directly.

[1] Synopsys DesignWare Cores Ethernet MAC Universal v3.70a
    [section 8.4.2 - Table 8-24]

Tested on SoCFPGA Stratix10 with ping sweep from 100 to 8300 byte packets.

Fixes: 286a837217 ("stmmac: add CHAINED descriptor mode support (V4)")
Suggested-by: Jose Abreu <jose.abreu@synopsys.com>
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08 19:47:44 -08:00
David S. Miller 81fe16e053 Merge branch 'qed-Slowpath-Queue-bug-fixes'
Denis Bolotin says:

====================
qed: Slowpath Queue bug fixes

This patch series fixes several bugs in the SPQ mechanism.
It deals with SPQ entries management, preventing resource leaks, memory
corruptions and handles error cases throughout the driver.
Please consider applying to net.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08 19:38:19 -08:00
Sagiv Ozeri fa5c448d98 qed: Fix potential memory corruption
A stuck ramrod should be deleted from the completion_pending list,
otherwise it will be added again in the future and corrupt the list.

Return error value to inform that ramrod is stuck and should be deleted.

Signed-off-by: Sagiv Ozeri <sagiv.ozeri@cavium.com>
Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08 19:38:19 -08:00
Denis Bolotin fb5e7438e7 qed: Fix SPQ entries not returned to pool in error flows
qed_sp_destroy_request() API was added for SPQ users that need to
free/return the entry they acquired in their error flows.

Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08 19:38:19 -08:00
Denis Bolotin 2632f22ebd qed: Fix blocking/unlimited SPQ entries leak
When there are no SPQ entries left in the free_pool, new entries are
allocated and are added to the unlimited list. When an entry in the pool
is available, the content is copied from the original entry, and the new
entry is sent to the device. qed_spq_post() is not aware of that, so the
additional entry is stored in the original entry as p_post_ent, which can
later be returned to the pool.

Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08 19:38:18 -08:00
Denis Bolotin 39477551df qed: Fix memory/entry leak in qed_init_sp_request()
Free the allocated SPQ entry or return the acquired SPQ entry to the free
list in error flows.

Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08 19:38:18 -08:00
Eric Dumazet 0d5b9311ba inet: frags: better deal with smp races
Multiple cpus might attempt to insert a new fragment in rhashtable,
if for example RPS is buggy, as reported by 배석진 in
https://patchwork.ozlabs.org/patch/994601/

We use rhashtable_lookup_get_insert_key() instead of
rhashtable_insert_fast() to let cpus losing the race
free their own inet_frag_queue and use the one that
was inserted by another cpu.

Fixes: 648700f76b ("inet: frags: use rhashtables for reassembly units")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: 배석진 <soukjin.bae@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08 18:40:30 -08:00
Huazhong Tan e12c225258 net: hns3: bugfix for not checking return value
hns3_reset_notify_init_enet() only return error early if the return
value of hns3_restore_vlan() is not 0.

This patch adds checking for the return value of hns3_restore_vlan.

Fixes: 7fa6be4fd2 ("net: hns3: fix incorrect return value/type of some functions")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08 16:23:49 -08:00
Linus Torvalds 24ccea7e10 Changes since last update:
- fix incorrect dropping of error code from bmap
 - print buffer offsets instead of useless hashed pointers when dumping
   corrupt metadata
 - fix integer overflow in attribute verifier
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEUzaAxoMeQq6m2jMV+H93GTRKtOsFAlvhuOAACgkQ+H93GTRK
 tOsgUg/9Edx3hs+s+T34PKcfLS2j1p3ao+dNnLPwCvGid5dZOF4YeoB4ojPrrxG4
 CW2VvpHtvg8FX1wIShuVFwjvuwzp/EJWBbIiwD7yPPVgYrofmrI1W/b6yRYhxnFt
 ek9wf+nAcStEEIfzJcsJHNfbJqB0ZWN4icILwcFglYuWN3M0WW9HsqwAtuJaKmWw
 8w8irVMHTdfhhJp14hG2nvTm/HKcyGDlbq9mQGmOm0uCcVf0mrrMPF/B9of3k/s5
 eDyDfn5bF+640xmkpVIe4u6LZa7NnpeJWvJq9P7gIr+Tz6MZv2jDejX6YyOAsdl/
 v9FgNl8Wl6otw4VMfAoZodq9khgrsWYLpsu210+YsEzdWq4FsFVJcNBmX86d/xtt
 Uuc84bNAea/EBtVoSk81+clmqb2h078te7OramgxwdagSlYo5aergWSDWv8EMKkb
 lXvnbf9xVbauJBy6orpEdVjnDNM248KWbjA9xO6S+IhIkfKGbdgXF4JRrYvpk2CW
 KpmBaOU1lzxzPDCZbtw/8f10JmBerQ/NjB5dp9DGfBbAKLrYZfc+Sqi+LaUnKbmj
 MBjHCnH0cqGAOJ54N3ogJfD26MiXN562+lvkqJhyZ5Wp6ac3Th5pBGnlrgAv1pmh
 5QjmlKip/GgiOEf/NSH6WHTcgexCCBpuRJg398ZGM/6KRsW6jBo=
 =Ghf/
 -----END PGP SIGNATURE-----

Merge tag 'xfs-4.20-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

Pull xfs fixes from Darrick Wong:

 - fix incorrect dropping of error code from bmap

 - print buffer offsets instead of useless hashed pointers when dumping
   corrupt metadata

 - fix integer overflow in attribute verifier

* tag 'xfs-4.20-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: fix overflow in xfs_attr3_leaf_verify
  xfs: print buffer offsets when dumping corrupt buffers
  xfs: Fix error code in 'xfs_ioc_getbmap()'
2018-11-08 17:55:01 -06:00
Linus Torvalds 6a1ac56c23 LED fixes for 4.20-rc2
-----BEGIN PGP SIGNATURE-----
 
 iJEEABYIADkWIQQUwxxKyE5l/npt8ARiEGxRG/Sl2wUCW+SJrBscamFjZWsuYW5h
 c3pld3NraUBnbWFpbC5jb20ACgkQYhBsURv0pdtTfAEAg9TNQi+IAth1TuEfbsrO
 ykB2PDEPD0wZnWh/sEIYhdAA/3zhYeqPq4X9PLhtRZQ2fJFE2Uw/4BTmSAqffD+L
 2ZwG
 =MA3z
 -----END PGP SIGNATURE-----

Merge tag 'led-fixes-for-4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED fixes from Jacek Anaszewski:
 "All three fixes are related to the newly added pattern trigger:

   - remove mutex_lock() from timer callback, which would trigger
     problems related to sleeping in atomic context, the removal is
     harmless since mutex protection turned out to be redundant in this
     case

   - fix pattern parsing to properly handle intervals with brightness == 0

   - fix typos in the ABI documentation"

* tag 'led-fixes-for-4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  Documentation: ABI: led-trigger-pattern: Fix typos
  leds: trigger: Fix sleeping function called from invalid context
  Fix pattern handling optimalization
2018-11-08 17:49:04 -06:00
Linus Torvalds d464572a80 sound fixes for 4.20-rc2
Two small regression fixes for HD-audio: one about vga_switcheroo and
 runtime PM, and another about Oops on some Thinkpads.
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAlvkO+UOHHRpd2FpQHN1
 c2UuZGUACgkQLtJE4w1nLE9tFA/9FQ/0sR8cnsiBku2fNTcfjka9xrDYZPSQ15Po
 Irx8uukzfWAEGC1DOEQ7PuOFC4xaSP+a064zwOlGL5jJcBvPuUQrRfvn8nJUBY5j
 dFG8N+65XTURpkHTAqGlLJXNyUeNMnm6QX5DI95rXjmCkf7z4HXmSWdBUQS+Rwe7
 2U/V+RAuDnv3RdGk9SB57ArrZniizsACHrIUSvMNit2Namm68SnK1YQLdrwUwbfD
 /PygaznnMUP1djIATqAZP/CN18rvL5Yljim98RO5pxbZqxZ4xFzrRCdeucSaEaX8
 lXE/+eUaAmecy0rVd6PwaW5RITAqpQsUWsUmHHLbpLGSbTvqB1+BX7Ilqw6KFbmD
 vwBGlXCeDnOtxX1d2nniWhJh9/3c9caBHp1vOPxU0qYU1zhw0+kUktZHatvBx2mq
 y3y8TWgFg1t4kIUZcKkKztOJGrLgixTGHeLZ2n5UBpDTJRNX718tkmbXydOgTVu9
 68k0CUKZrB1X8j0h9YEDl3YH1qIBkT6FnRQgadpIUNQ6EZpQVABEa0CbQJOSzkL8
 20yf5PShXn4doezT8g9lme4jlIlo7h84u+Jpkf6Z0wskU+afps+WWj+pyIMadj6x
 QeuEyStqSTndD37ju5/7SwLhYX0FBuL392mHPCeDb0M3XuNqhnS+pb/3S20jeVmh
 NvdNNGc=
 =TOgu
 -----END PGP SIGNATURE-----

Merge tag 'sound-4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "Two small regression fixes for HD-audio: one about vga_switcheroo and
  runtime PM, and another about Oops on some Thinkpads"

* tag 'sound-4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Fix incorrect clearance of thinkpad_acpi hooks
  vga_switcheroo: Fix missing gpu_bound call at audio client registration
2018-11-08 17:45:42 -06:00
John Garry 89c38422e0 of, numa: Validate some distance map rules
Currently the NUMA distance map parsing does not validate the distance
table for the distance-matrix rules 1-2 in [1].

However the arch NUMA code may enforce some of these rules, but not all.
Such is the case for the arm64 port, which does not enforce the rule that
the distance between separates nodes cannot equal LOCAL_DISTANCE.

The patch adds the following rules validation:
- distance of node to self equals LOCAL_DISTANCE
- distance of separate nodes > LOCAL_DISTANCE

This change avoids a yet-unresolved crash reported in [2].

A note on dealing with symmetrical distances between nodes:

Validating symmetrical distances between nodes is difficult. If it were
mandated in the bindings that every distance must be recorded in the
table, then it would be easy. However, it isn't.

In addition to this, it is also possible to record [b, a] distance only
(and not [a, b]). So, when processing the table for [b, a], we cannot
assert that current distance of [a, b] != [b, a] as invalid, as [a, b]
distance may not be present in the table and current distance would be
default at REMOTE_DISTANCE.

As such, we maintain the policy that we overwrite distance [a, b] = [b, a]
for b > a. This policy is different to kernel ACPI SLIT validation, which
allows non-symmetrical distances (ACPI spec SLIT rules allow it). However,
the distance debug message is dropped as it may be misleading (for a distance
which is later overwritten).

Some final notes on semantics:

- It is implied that it is the responsibility of the arch NUMA code to
  reset the NUMA distance map for an error in distance map parsing.

- It is the responsibility of the FW NUMA topology parsing (whether OF or
  ACPI) to enforce NUMA distance rules, and not arch NUMA code.

[1] Documents/devicetree/bindings/numa.txt
[2] https://www.spinics.net/lists/arm-kernel/msg683304.html

Cc: stable@vger.kernel.org # 4.7
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2018-11-08 12:44:34 -06:00
Robin Murphy 6778be4e52 of/device: Really only set bus DMA mask when appropriate
of_dma_configure() was *supposed* to be following the same logic as
acpi_dma_configure() and only setting bus_dma_mask if some range was
specified by the firmware. However, it seems that subtlety got lost in
the process of fitting it into the differently-shaped control flow, and
as a result the force_dma==true case ends up always setting the bus mask
to the 32-bit default, which is not what anyone wants.

Make sure we only touch it if the DT actually said so.

Fixes: 6c2fb2ea76 ("of/device: Set bus DMA mask as appropriate")
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reported-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Tested-by: John Stultz <john.stultz@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Robert Richter <robert.richter@cavium.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2018-11-08 12:44:34 -06:00
Jerome Brunet d6ee1e7e90 clk: meson: axg: mark fdiv2 and fdiv3 as critical
Similar to gxbb and gxl platforms, axg SCPI Cortex-M co-processor
uses the fdiv2 and fdiv3 to, among other things, provide the cpu
clock.

Until clock hand-off mechanism makes its way to CCF and the generic
SCPI claims platform specific clocks, these clocks must be marked as
critical to make sure they are never disabled when needed by the
co-processor.

Fixes: 05f814402d ("clk: meson: add fdiv clock gates")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-08 10:21:21 -08:00
Christian Hewitt e2576c8bdf clk: meson-gxbb: set fclk_div3 as CLK_IS_CRITICAL
On the Khadas VIM2 (GXM) and LePotato (GXL) board there are problems
with reboot; e.g. a ~60 second delay between issuing reboot and the
board power cycling (and in some OS configurations reboot will fail
and require manual power cycling).

Similar to 'commit c987ac6f1f ("clk:
meson-gxbb: set fclk_div2 as CLK_IS_CRITICAL")' the SCPI Cortex-M4
Co-Processor seems to depend on FCLK_DIV3 being operational.

Until commit 05f814402d ("clk:
meson: add fdiv clock gates"), this clock was modeled and left on by
the bootloader.

We don't have precise documentation about the SCPI Co-Processor and
its clock requirement so we are learning things the hard way.

Marking this clock as critical solves the problem but it should not
be viewed as final solution. Ideally, the SCPI driver should claim
these clocks. We also depends on some clock hand-off mechanism
making its way to CCF, to make sure the clock stays on between its
registration and the SCPI driver probe.

Fixes: 05f814402d ("clk: meson: add fdiv clock gates")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-08 10:12:46 -08:00
Ard Biesheuvel 24cc61d8cb arm64: memblock: don't permit memblock resizing until linear mapping is up
Bhupesh reports that having numerous memblock reservations at early
boot may result in the following crash:

  Unable to handle kernel paging request at virtual address ffff80003ffe0000
  ...
  Call trace:
   __memcpy+0x110/0x180
   memblock_add_range+0x134/0x2e8
   memblock_reserve+0x70/0xb8
   memblock_alloc_base_nid+0x6c/0x88
   __memblock_alloc_base+0x3c/0x4c
   memblock_alloc_base+0x28/0x4c
   memblock_alloc+0x2c/0x38
   early_pgtable_alloc+0x20/0xb0
   paging_init+0x28/0x7f8

This is caused by the fact that we permit memblock resizing before the
linear mapping is up, and so the memblock_reserved() array is moved
into memory that is not mapped yet.

So let's ensure that this crash can no longer occur, by deferring to
call to memblock_allow_resize() to after the linear mapping has been
created.

Reported-by: Bhupesh Sharma <bhsharma@redhat.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-11-08 17:54:03 +00:00
Ard Biesheuvel 26a4676faa arm64: mm: define NET_IP_ALIGN to 0
On arm64, there is no need to add 2 bytes of padding to the start of
each network buffer just to make the IP header appear 32-bit aligned.

Since this might actually adversely affect DMA performance some
platforms, let's override NET_IP_ALIGN to 0 to get rid of this
padding.

Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-11-08 17:50:26 +00:00
Ilya Dryomov 23c625ce30 libceph: assume argonaut on the server side
No one is running pre-argonaut.  In addition one of the argonaut
features (NOSRCADDR) has been required since day one (and a half,
2.6.34 vs 2.6.35) of the kernel client.

Allow for the possibility of reusing these feature bits later.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
2018-11-08 17:51:11 +01:00
Luis Henriques 71f2cc64d0 ceph: quota: fix null pointer dereference in quota check
This patch fixes a possible null pointer dereference in
check_quota_exceeded, detected by the static checker smatch, with the
following warning:

   fs/ceph/quota.c:240 check_quota_exceeded()
    error: we previously assumed 'realm' could be null (see line 188)

Fixes: b7a2921765 ("ceph: quota: support for ceph.quota.max_files")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-11-08 17:51:11 +01:00
Luis Henriques c2c6d3ce0d ceph: add destination file data sync before doing any remote copy
If we try to copy into a file that was just written, any data that is
remote copied will be overwritten by our buffered writes once they are
flushed.  When this happens, the call to invalidate_inode_pages2_range
will also return a -EBUSY error.

This patch fixes this by also sync'ing the destination file before
starting any copy.

Fixes: 503f82a993 ("ceph: support copy_file_range file operation")
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-11-08 17:50:37 +01:00
Kuninori Morimoto bb39ba6a8d sata_rcar: convert to SPDX identifiers
This patch updates license to use SPDX-License-Identifier
instead of verbose license text.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-08 06:32:16 -07:00
Anton Ivanov 0033dfd92a ubd: fix missing initialization of io_req
The SYNC path doesn't initialize io_req->error, which can cause
random errors. Before the conversion to blk-mq, we always
completed requests with BLK_STS_OK status, but now we actually
look at the error field and this issue becomes apparent.

Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>

[axboe: fixed up commit message to explain what is actually going on]

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-08 06:16:09 -07:00
H. Peter Anvin (Intel) d0ffb805b7 arch/alpha, termios: implement BOTHER, IBSHIFT and termios2
Alpha has had c_ispeed and c_ospeed, but still set speeds in c_cflags
using arbitrary flags. Because BOTHER is not defined, the general
Linux code doesn't allow setting arbitrary baud rates, and because
CBAUDEX == 0, we can have an array overrun of the baud_rate[] table in
drivers/tty/tty_baudrate.c if (c_cflags & CBAUD) == 037.

Resolve both problems by #defining BOTHER to 037 on Alpha.

However, userspace still needs to know if setting BOTHER is actually
safe given legacy kernels (does anyone actually care about that on
Alpha anymore?), so enable the TCGETS2/TCSETS*2 ioctls on Alpha, even
though they use the same structure. Define struct termios2 just for
compatibility; it is the exact same structure as struct termios. In a
future patchset, this will be cleaned up so the uapi headers are
usable from libc.

Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Cc: <linux-alpha@vger.kernel.org>
Cc: <linux-serial@vger.kernel.org>
Cc: Johan Hovold <johan@kernel.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-08 04:09:30 -08:00
Linus Torvalds b00d209241 Small improvements to Compiler Attributes:
- Define asm_volatile_goto for non-gcc compilers
     From Nick Desaulniers
 
   - Improve the explanation of compiler_attributes.h
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPjU5OPd5QIZ9jqqOGXyLc2htIW0FAlvkElAACgkQGXyLc2ht
 IW1QnhAA3RDKTCK2Y5GsTbZpA3NDItnjKXqCFW24YyHookcgnKrytnsZgFCUKZBA
 ys551crML+7HeFC2HdipORLuG+cXbjEl5IzblTAqOQQGmPa9g+kVWOiMiZhJWTVT
 gHrkwZKxSV3ndbsCHtnX9UEFwjOWFGfdvdhe33pcFZefAXd7y/fjLnlPBdPq5zh0
 BnHoLPRvuWFR+m2qOWbVTn/bq1JqpfTsn1fFC5aFFTruQRGBcPbpa1yoPiB6tVsJ
 OLdlScnS9J7zafGE65Ig+x57rYADV7c7Wm8kupwpo7Qvrmnhg4skUp7YGb/O4XiO
 sbH6N+Tn0PD3EzxxZGq1ZBq+ZirM2sfqYsWJmf+igfUU+fP/tmkl5JZtuIeW9c2J
 9GZcMfn5LZkraPGV6eZBTou7Kdz33vLmPXGPOc49BZGWSthjQ/8NYD5yjfZvK2xv
 TFV2DdQ+WQizejwdsuAUrxOHCUUeLJEjsAkQrHKhzPWRs448bkAVWTy3IN1Z+g1o
 spElAy8PIK8XFVyAa8o/SPhB0sghIHERA4p7Y+utKdF/D/sy13cDd27R/Dzf/282
 tu0tpb00glFYUHtDUpYKBFjYY76upcukPJ/QtQXDzI7ohRfULs7lHrxqFQBqzlKy
 mqDh5tmLNKdziQp5nttCAh3q/s8Bl591M/0aTKRYcY9yFp2Ezs0=
 =QZoP
 -----END PGP SIGNATURE-----

Merge tag 'compiler-attributes-for-linus-v4.20-rc2' of https://github.com/ojeda/linux

Pull compiler attribute fixlets from Miguel Ojeda:
 "Small improvements to Compiler Attributes:

   - Define asm_volatile_goto for non-gcc compilers (Nick Desaulniers)

   - Improve the explanation of compiler_attributes.h"

* tag 'compiler-attributes-for-linus-v4.20-rc2' of https://github.com/ojeda/linux:
  Compiler Attributes: improve explanation of header
  include/linux/compiler*.h: define asm_volatile_goto
2018-11-08 07:06:58 -05:00
Linus Torvalds d50ffc585d MTD changes:
* Kill a VLA in sa1100
 
 SPI NOR changes:
 * Make sure ->addr_width is restored when SFDP parsing fails
 * Propate errors happening in cqspi_direct_read_execute()
 
 NAND changes:
 * Fix kernel-doc mismatch
 * Fix nanddev_neraseblocks() to return the correct value
 * Avoid selection of BCH_CONST_PARAMS when some users require
   dynamic BCH settings
 -----BEGIN PGP SIGNATURE-----
 
 iQJQBAABCgA6FiEEKmCqpbOU668PNA69Ze02AX4ItwAFAlvkDewcHGJvcmlzLmJy
 ZXppbGxvbkBib290bGluLmNvbQAKCRBl7TYBfgi3ACLTD/9DyyWKnH5xJAc/bjj0
 o2cka+L5xW/jUiUMUhNJqwcOCD11PiuXAxsHlJY6HhGXldl4hm8T6rFagmo0B897
 HaK2rn0guTERzJUk6EUKiX8wwenwuv6lpAfEGfcUPJe7EMEm5L7e5ETtwGUVEWBt
 rcRakt5m3VTIW7g7BzExxAalcNuAs80u8RVflsvS2TRLuFo63SnyI4JCo/7k/11a
 3itq3x4PNQJcsuKZzX0b7rWO3crB/McCtRStSF11ZCDD5X7KmHKrULBEhaDMfezS
 2SzRYe9l8ZtEE3INZny+73H6s6aIhPdTR5UMj9vIyZLDe58nsrzwBBs0jUwttogD
 QZkzRylGSkNKBfN/FIFkL3NcTY5ub5caVIT04JCdSc28k/HdprHfQC7VMj9o9iLU
 FcNsCMU6lmrL3WxudzSng4mZ89JCzoZyjOI5i5i9lM4Hxj+hTehKyIZllc9aT7PR
 l1H9zr+djscNXfQSHEljJbzcFuHVbViILobO3ASbOIsaUiv6RTTZ4kiyEeXoke0C
 Tg2TNCo3az5xZGhHrY9qvJXYFlNJrilU3K926gKAG3s0LVOCXK43D+N1Nm2q6ISu
 Bzzg6ND6Lzey2l4zhFGGqpLyA81bbhgyKs6xi5NCSU7NDAdAo2+fwgbkE95/SXP/
 w7oJq1FSia9PDgaBUeTPFdT7EA==
 =uVyq
 -----END PGP SIGNATURE-----

Merge tag 'mtd/fixes-for-4.20-rc2' of git://git.infradead.org/linux-mtd

Pull MTD fixes from Boris Brezillon:
 "MTD changes:
   - Kill a VLA in sa1100

  SPI NOR changes:
   - Make sure ->addr_width is restored when SFDP parsing fails
   - Propate errors happening in cqspi_direct_read_execute()

  NAND changes:
   - Fix kernel-doc mismatch
   - Fix nanddev_neraseblocks() to return the correct value
   - Avoid selection of BCH_CONST_PARAMS when some users require dynamic
     BCH settings"

* tag 'mtd/fixes-for-4.20-rc2' of git://git.infradead.org/linux-mtd:
  mtd: nand: Fix nanddev_pos_next_page() kernel-doc header
  mtd: sa1100: avoid VLA in sa1100_setup_mtd
  mtd: spi-nor: Reset nor->addr_width when SFDP parsing failed
  mtd: spi-nor: cadence-quadspi: Return error code in cqspi_direct_read_execute()
  mtd: nand: Fix nanddev_neraseblocks()
  mtd: nand: drop kernel-doc notation for a deleted function parameter
  mtd: docg3: don't set conflicting BCH_CONST_PARAMS option
2018-11-08 07:04:29 -05:00
H. Peter Anvin 991a251940 termios, tty/tty_baudrate.c: fix buffer overrun
On architectures with CBAUDEX == 0 (Alpha and PowerPC), the code in tty_baudrate.c does
not do any limit checking on the tty_baudrate[] array, and in fact a
buffer overrun is possible on both architectures. Add a limit check to
prevent that situation.

This will be followed by a much bigger cleanup/simplification patch.

Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Requested-by: Cc: Johan Hovold <johan@kernel.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-08 03:36:45 -08:00
Mikulas Patocka 943210ba80 vt: fix broken display when running aptitude
If you run aptitude on framebuffer console, the display is corrupted. The
corruption is caused by the commit d8ae7242. The patch adds "offset" to
"start" when calling scr_memsetw, but it forgets to do the same addition
on a subsequent call to do_update_region.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: d8ae724271 ("vt: preserve unicode values corresponding to screen characters")
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Cc: stable@vger.kernel.org	# 4.19
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-08 03:36:40 -08:00
Miguel Ojeda 24efee412c Compiler Attributes: improve explanation of header
Explain better what "optional" attributes are, and avoid calling
them so to avoid confusion. Simply retain "Optional" as a word
to look for in the comments.

Moreover, add a couple sentences to explain a bit more the intention
and the documentation links.

Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2018-11-08 11:33:52 +01:00
Eric W. Biederman 9c8e0a1b68 mount: Prevent MNT_DETACH from disconnecting locked mounts
Timothy Baldwin <timbaldwin@fastmail.co.uk> wrote:
> As per mount_namespaces(7) unprivileged users should not be able to look under mount points:
>
>   Mounts that come as a single unit from more privileged mount are locked
>   together and may not be separated in a less privileged mount namespace.
>
> However they can:
>
> 1. Create a mount namespace.
> 2. In the mount namespace open a file descriptor to the parent of a mount point.
> 3. Destroy the mount namespace.
> 4. Use the file descriptor to look under the mount point.
>
> I have reproduced this with Linux 4.16.18 and Linux 4.18-rc8.
>
> The setup:
>
> $ sudo sysctl kernel.unprivileged_userns_clone=1
> kernel.unprivileged_userns_clone = 1
> $ mkdir -p A/B/Secret
> $ sudo mount -t tmpfs hide A/B
>
>
> "Secret" is indeed hidden as expected:
>
> $ ls -lR A
> A:
> total 0
> drwxrwxrwt 2 root root 40 Feb 12 21:08 B
>
> A/B:
> total 0
>
>
> The attack revealing "Secret":
>
> $ unshare -Umr sh -c "exec unshare -m ls -lR /proc/self/fd/4/ 4<A"
> /proc/self/fd/4/:
> total 0
> drwxr-xr-x 3 root root 60 Feb 12 21:08 B
>
> /proc/self/fd/4/B:
> total 0
> drwxr-xr-x 2 root root 40 Feb 12 21:08 Secret
>
> /proc/self/fd/4/B/Secret:
> total 0

I tracked this down to put_mnt_ns running passing UMOUNT_SYNC and
disconnecting all of the mounts in a mount namespace.  Fix this by
factoring drop_mounts out of drop_collected_mounts and passing
0 instead of UMOUNT_SYNC.

There are two possible behavior differences that result from this.
- No longer setting UMOUNT_SYNC will no longer set MNT_SYNC_UMOUNT on
  the vfsmounts being unmounted.  This effects the lazy rcu walk by
  kicking the walk out of rcu mode and forcing it to be a non-lazy
  walk.
- No longer disconnecting locked mounts will keep some mounts around
  longer as they stay because the are locked to other mounts.

There are only two users of drop_collected mounts: audit_tree.c and
put_mnt_ns.

In audit_tree.c the mounts are private and there are no rcu lazy walks
only calls to iterate_mounts. So the changes should have no effect
except for a small timing effect as the connected mounts are disconnected.

In put_mnt_ns there may be references from process outside the mount
namespace to the mounts.  So the mounts remaining connected will
be the bug fix that is needed.  That rcu walks are allowed to continue
appears not to be a problem especially as the rcu walk change was about
an implementation detail not about semantics.

Cc: stable@vger.kernel.org
Fixes: 5ff9d8a65c ("vfs: Lock in place mounts from more privileged users")
Reported-by: Timothy Baldwin <timbaldwin@fastmail.co.uk>
Tested-by: Timothy Baldwin <timbaldwin@fastmail.co.uk>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-11-08 01:05:32 -06:00
Thomas Richter 0bb2ae1b26 s390/perf: Change CPUM_CF return code in event init function
The function perf_init_event() creates a new event and
assignes it to a PMU. This a done in a loop over all existing
PMUs. For each listed PMU the event init function is called
and if this function does return any other error than -ENOENT,
the loop is terminated the creation of the event fails.

If the event is invalid, return -ENOENT to try other PMUs.

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-11-08 07:58:16 +01:00
Juri Lelli e6a2d72c10 posix-cpu-timers: Remove useless call to check_dl_overrun()
check_dl_overrun() is used to send a SIGXCPU to users that asked to be
informed when a SCHED_DEADLINE runtime overruns occur.

The function is called by check_thread_timers() already, so the call in
check_process_timers() is redundant/wrong (even though harmless).

Remove it.

Fixes: 34be39305a ("sched/deadline: Implement "runtime overrun signal" support")
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: linux-rt-users@vger.kernel.org
Cc: mtk.manpages@gmail.com
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Luca Abeni <luca.abeni@santannapisa.it>
Cc: Claudio Scordino <claudio@evidence.eu.com>
Link: https://lkml.kernel.org/r/20181107111032.32291-1-juri.lelli@redhat.com
2018-11-08 07:43:35 +01:00
Michał Mirosław b25ddb00bc qlcnic: remove assumption that vlan_tci != 0
VLAN.TCI == 0 is perfectly valid (802.1p), so allow it to be accelerated.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-07 22:37:55 -08:00
Michał Mirosław e84b47941e ibmvnic: fix accelerated VLAN handling
Don't request tag insertion when it isn't present in outgoing skb.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-07 22:36:21 -08:00
Eric W. Biederman df7342b240 mount: Don't allow copying MNT_UNBINDABLE|MNT_LOCKED mounts
Jonathan Calmels from NVIDIA reported that he's able to bypass the
mount visibility security check in place in the Linux kernel by using
a combination of the unbindable property along with the private mount
propagation option to allow a unprivileged user to see a path which
was purposefully hidden by the root user.

Reproducer:
  # Hide a path to all users using a tmpfs
  root@castiana:~# mount -t tmpfs tmpfs /sys/devices/
  root@castiana:~#

  # As an unprivileged user, unshare user namespace and mount namespace
  stgraber@castiana:~$ unshare -U -m -r

  # Confirm the path is still not accessible
  root@castiana:~# ls /sys/devices/

  # Make /sys recursively unbindable and private
  root@castiana:~# mount --make-runbindable /sys
  root@castiana:~# mount --make-private /sys

  # Recursively bind-mount the rest of /sys over to /mnnt
  root@castiana:~# mount --rbind /sys/ /mnt

  # Access our hidden /sys/device as an unprivileged user
  root@castiana:~# ls /mnt/devices/
  breakpoint cpu cstate_core cstate_pkg i915 intel_pt isa kprobe
  LNXSYSTM:00 msr pci0000:00 platform pnp0 power software system
  tracepoint uncore_arb uncore_cbox_0 uncore_cbox_1 uprobe virtual

Solve this by teaching copy_tree to fail if a mount turns out to be
both unbindable and locked.

Cc: stable@vger.kernel.org
Fixes: 5ff9d8a65c ("vfs: Lock in place mounts from more privileged users")
Reported-by: Jonathan Calmels <jcalmels@nvidia.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-11-08 00:30:30 -06:00
Eric W. Biederman 25d202ed82 mount: Retest MNT_LOCKED in do_umount
It was recently pointed out that the one instance of testing MNT_LOCKED
outside of the namespace_sem is in ksys_umount.

Fix that by adding a test inside of do_umount with namespace_sem and
the mount_lock held.  As it helps to fail fails the existing test is
maintained with an additional comment pointing out that it may be racy
because the locks are not held.

Cc: stable@vger.kernel.org
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Fixes: 5ff9d8a65c ("vfs: Lock in place mounts from more privileged users")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-11-08 00:14:21 -06:00
David S. Miller b1870a6d3f Merge branch 'FDDI-defza-Fix-a-bunch-of-small-issues'
Maciej W. Rozycki says:

====================
FDDI: defza: Fix a bunch of small issues

 Here is a bunch of small fixes addressing issues that I missed in my
final round of testing.  None of these affect run-time behaviour.  One was
actually found by the kbuild bot, which turned out to be more pedantic
than my compiler.  See individual change descriptions for details.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-07 21:53:31 -08:00