For RX virtuqueue, the used length is validated in all the three paths
(big, small and mergeable). For control vq, we never tries to use used
length. So this patch forbids the core to validate the used length.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20211027022107.14357-3-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch validate the used buffer length provided by the device
before trying to use it. This is done by record the in buffer length
in a new field in desc_state structure during virtqueue_add(), then we
can fail the virtqueue_get_buf() when we find the device is trying to
give us a used buffer length which is greater than the in buffer
length.
Since some drivers have already done the validation by themselves,
this patch tries to makes the core validation optional. For the driver
that doesn't want the validation, it can set the
suppress_used_validation to be true (which could be overridden by
force_used_validation module parameter). To be more efficient, a
dedicate array is used for storing the validate used length, this
helps to eliminate the cache stress if validation is done by the
driver.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20211027022107.14357-2-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtblk_setup_cmd returns blk_status_t in an int, callers then assign it
back to a blk_status_t variable. blk_status_t is either u32 or (more
typically) u8 so it works, but is inelegant and causes sparse warnings.
Pass the status in blk_status_t in a consistent way.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: b2c5221fd074 ("virtio-blk: avoid preallocating big SGL for data")
Cc: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
The default value is 0 meaning "no limit". However if 0
is specified on the command line it is instead silently
converted to 1. Further, the value is already validated
at point of use, there's no point in duplicating code
validating the value when it is set.
Simplify the code while making the behaviour more consistent
by using plain module_param.
Fixes: 1a662cf6cb9a ("virtio-blk: add num_request_queues module parameter")
Cc: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The virtio specification received a new mandatory feature
(VIRTIO_I2C_F_ZERO_LENGTH_REQUEST) for zero length requests. Fail if the
feature isn't offered by the device.
For each read-request, set the VIRTIO_I2C_FLAGS_M_RD flag, as required
by the VIRTIO_I2C_F_ZERO_LENGTH_REQUEST feature.
This allows us to support zero length requests, like SMBUS Quick, where
the buffer need not be sent anymore.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/7c58868cd26d2fc4bd82d0d8b0dfb55636380110.1634808714.git.viresh.kumar@linaro.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jie Deng <jie.deng@intel.com> # once the spec is merged
coccicheck complains about the use of snprintf() in sysfs show
functions:
WARNING use scnprintf or sprintf
Use sysfs_emit instead of scnprintf or sprintf makes more sense.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Ye Guojin <ye.guojin@zte.com.cn>
Link: https://lore.kernel.org/r/20211021065111.1047824-1-ye.guojin@zte.com.cn
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
This patch tries to make sure the virtio interrupt handler for INTX
won't be called after a reset and before virtio_device_ready(). We
can't use IRQF_NO_AUTOEN since we're using shared interrupt
(IRQF_SHARED). So this patch tracks the INTX enabling status in a new
intx_soft_enabled variable and toggle it during in
vp_disable/enable_vectors(). The INTX interrupt handler will check
intx_soft_enabled before processing the actual interrupt.
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20211019070152.8236-6-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We used to synchronize pending MSI-X irq handlers via
synchronize_irq(), this may not work for the untrusted device which
may keep sending interrupts after reset which may lead unexpected
results. Similarly, we should not enable MSI-X interrupt until the
device is ready. So this patch fixes those two issues by:
1) switching to use disable_irq() to prevent the virtio interrupt
handlers to be called after the device is reset.
2) using IRQF_NO_AUTOEN and enable the MSI-X irq during .ready()
This can make sure the virtio interrupt handler won't be called before
virtio_device_ready() and after reset.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20211019070152.8236-5-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduces a new method to enable the callbacks for config
and virtqueues. This will be used for making sure the virtqueue
callbacks are only enabled after virtio_device_ready() if transport
implements this method.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20211019070152.8236-4-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We calculate nr_ports based on the max_nr_ports:
nr_queues = use_multiport(portdev) ? (nr_ports + 1) * 2 : 2;
If the device advertises a large max_nr_ports, we will end up with a
integer overflow. Fixing this by validating the max_nr_ports and fail
the probe for invalid max_nr_ports in this case.
Cc: Amit Shah <amit@kernel.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20211019070152.8236-3-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There is a spelling mistake in a dev_err error message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20211025102240.22801-1-colin.i.king@gmail.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
If an untrusted device neogitates BLK_F_MQ but advertises a zero
num_queues, the driver may end up trying to allocating zero size
buffers where ZERO_SIZE_PTR is returned which may pass the checking
against the NULL. This will lead unexpected results.
Fixing this by failing the probe in this case.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20211019070152.8236-2-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Adding myself as virtio-pmem maintainer and also adding virtualization
mailing list entry for virtio specific bits. Helps to get notified for
appropriate bug fixes & enhancements.
Signed-off-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Link: https://lore.kernel.org/r/20211016090646.371145-1-pankaj.gupta.linux@gmail.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When using indirect with packed, we don't check for allocation failures.
This patch checks that and fall back on direct.
Fixes: 1ce9e6055f ("virtio_ring: introduce packed ring support")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20211020112323.67466-3-xuanzhuo@linux.alibaba.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Align the arguments of virtqueue_add_indirect_packed() to the open ( to
make it look prettier.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20211020112323.67466-2-xuanzhuo@linux.alibaba.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If we ensure we have already some data available by enqueuing
again the buffer once data are exhausted, we can return what we
have without waiting for the device answer.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Link: https://lore.kernel.org/r/20211028101111.128049-5-lvivier@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When virtio-rng device was dropped by the hwrng core we were forced
to wait the buffer to come back from the device to not have
remaining ongoing operation that could spoil the buffer.
But now, as the buffer is internal to the virtio-rng we can release
the waiting loop immediately, the buffer will be retrieve and use
when the virtio-rng driver will be selected again.
This avoids to hang on an rng_current write command if the virtio-rng
device is blocked by a lack of entropy. This allows to select
another entropy source if the current one is empty.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Link: https://lore.kernel.org/r/20211028101111.128049-3-lvivier@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
hwrng core uses two buffers that can be mixed in the
virtio-rng queue.
If the buffer is provided with wait=0 it is enqueued in the
virtio-rng queue but unused by the caller.
On the next call, core provides another buffer but the
first one is filled instead and the new one queued.
And the caller reads the data from the new one that is not
updated, and the data in the first one are lost.
To avoid this mix, virtio-rng needs to use its own unique
internal buffer at a cost of a data copy to the caller buffer.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Link: https://lore.kernel.org/r/20211028101111.128049-2-lvivier@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add code to register to hardware asynchronous events. Use this
mechanism to track link status events coming from the device and update
the config struct.
After doing link status change, call the vdpa callback to notify of the
link status change.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210909123635.30884-4-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
A subesequent patch will use the same workqueue for executing other
work not related to control VQ. Rename the workqueue and the work queue
entry used to convey information to the workqueue.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210909123635.30884-3-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
No need to save the mtu int the net device struct. We can save it in the
config struct which cannot be modified.
Moreover, move the initialization to. mlx5_vdpa_set_features() callback
is not the right place to put it.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210909123635.30884-2-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Allow to match and mangle on inner headers / payload data after the
transport header. There is a new field in the pktinfo structure that
stores the inner header offset which is calculated only when requested.
Only TCP and UDP supported at this stage.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
For the devices which implement the get_vq_num_min callback, the driver
should not negotiate with virtqueue size with the backend vdpa device if
the value returned by get_vq_num_min equals to the value returned by
get_vq_num_max.
This is useful for vdpa devices based on legacy virtio specfication.
Signed-off-by: Wu Zongyong <wuzongyong@linux.alibaba.com>
Link: https://lore.kernel.org/r/bc0551cec6c3f3dd9424b678b7c22d882aebab3a.1635493219.git.wuzongyong@linux.alibaba.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This callback is optional. For vdpa devices that not support to change
virtqueue size, get_vq_num_min and get_vq_num_max will return the same
value, so that users can choose a correct value for that device.
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Wu Zongyong <wuzongyong@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/f4af5b0abd660d9a29ab6b2f67bd6df10284a230.1635493219.git.wuzongyong@linux.alibaba.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Sometimes a user would like to control the amount of request queues to
be created for a block device. For example, for limiting the memory
footprint of virtio-blk devices.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Link: https://lore.kernel.org/r/20210902204622.54354-1-mgurtovoy@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
No need to pre-allocate a big buffer for the IO SGL anymore. If a device
has lots of deep queues, preallocation for the sg list can consume
substantial amounts of memory. For HW virtio-blk device, nr_hw_queues
can be 64 or 128 and each queue's depth might be 128. This means the
resulting preallocation for the data SGLs is big.
Switch to runtime allocation for SGL for lists longer than 2 entries.
This is the approach used by NVMe drivers so it should be reasonable for
virtio block as well. Runtime SGL allocation has always been the case
for the legacy I/O path so this is nothing new.
The preallocated small SGL depends on SG_CHAIN so if the ARCH doesn't
support SG_CHAIN, use only runtime allocation for the SGL.
Re-organize the setup of the IO request to fit the new sg chain
mechanism.
No performance degradation was seen (fio libaio engine with 16 jobs and
128 iodepth):
IO size IOPs Rand Read (before/after) IOPs Rand Write (before/after)
-------- --------------------------------- ----------------------------------
512B 318K/316K 329K/325K
4KB 323K/321K 353K/349K
16KB 199K/208K 250K/275K
128KB 36K/36.1K 39.2K/41.7K
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Israel Rukshin <israelr@nvidia.com>
Link: https://lore.kernel.org/r/20210901131434.31158-1-mgurtovoy@nvidia.com
Reviewed-by: Feng Li <lifeng1519@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de> # kconfig fixups
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make tailroom math follow same logic as everything else, subtracing
values in the order in which things are laid out in the buffer.
Tested-by: Corentin Noël <corentin.noel@collabora.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Generalize NFT_META_IIFTYPE to NFT_META_IFTYPE which allows you to match
on the interface type of the skb->dev field. This field is used by the
netdev family to add an implicit dependency to skip non-ethernet packets
when matching on layer 3 and 4 TCP/IP header fields.
For backward compatibility, add the NFT_META_IIFTYPE alias to
NFT_META_IFTYPE.
Add __NFT_META_IIFTYPE, to be used by userspace in the future to match
specifically on the iiftype.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The internal stream state sets the timeout to 120 seconds 2 seconds
after the creation of the flow, attach this internal stream state to the
IPS_ASSURED flag for consistent event reporting.
Before this patch:
[NEW] udp 17 30 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 [UNREPLIED] src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282
[UPDATE] udp 17 30 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282
[UPDATE] udp 17 30 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282 [ASSURED]
[DESTROY] udp 17 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282 [ASSURED]
Note IPS_ASSURED for the flow not yet in the internal stream state.
after this update:
[NEW] udp 17 30 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 [UNREPLIED] src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282
[UPDATE] udp 17 30 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282
[UPDATE] udp 17 120 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282 [ASSURED]
[DESTROY] udp 17 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282 [ASSURED]
Before this patch, short-lived UDP flows never entered IPS_ASSURED, so
they were already candidate flow to be deleted by early_drop under
stress.
Before this patch, IPS_ASSURED is set on regardless the internal stream
state, attach this internal stream state to IPS_ASSURED.
packet #1 (original direction) enters NEW state
packet #2 (reply direction) enters ESTABLISHED state, sets on IPS_SEEN_REPLY
paclet #3 (any direction) sets on IPS_ASSURED (if 2 seconds since the
creation has passed by).
Reported-by: Maciej Żenczykowski <zenczykowski@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Adding the Line6 HX-Stomp XL USB_ID as it needs this fixed frequency
quirk as well.
The device is basically just the HX-Stomp with some more buttons on
the face. I've done some recording with it after adding it, and it
seems to function properly with this fix. The Midi features appear to
be working as well.
[ a coding style fix and patch reformat by tiwai ]
Signed-off-by: Jason Ormes <skryking@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211030200405.1358678-1-skryking@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Do not list the same objects in 'OBJECTS' and 'targets'.
Instead, add $(OBJECTS) to 'targets'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
The same dependency
$(obj)/misc.o: $(obj)/sizes.h
... appears twice, at line 29 and line 55 in this Makefile.
Remove the second one.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
This avoids using dereference_function_descriptor in the ftrace code
path, and it's also faster.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
With DYNAMIC_FTRACE, we need to implement ftrace_update_trace_func
and not call ftrace_trace_function() directly, as ftrace doesn't
expect calls to this function during code patching.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Replace kthread_create/wake_up_process() with kthread_run()
to simplify the code.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Helge Deller <deller@gmx.de>
tracing the xchg functions leads to recursion in various
places. Therefore mark the function as notrace.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Instead of showing only the very first application which needs
recompile, show all of them, but print them only once.
Includes typo fix noticed by Colin Ian King.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Jason Wang