amt 'Relay' interface manages multicast groups(igmp/mld) and sources.
In order to manage, it should have the function to parse igmp/mld
report messages. So, this adds the logic for parsing igmp report messages
and saves them on their own data structure.
struct amt_group_node means one group(igmp/mld).
struct amt_source_node means one source.
The same source can't exist in the same group.
The same group can exist in the same tunnel because it manages
the host address too.
The group information is used when forwarding multicast data.
If there are no groups in the specific tunnel, Relay doesn't forward it.
Although Relay manages sources, it doesn't support the source filtering
feature. Because the reason to manage sources is just that in order
to manage group more correctly.
In the next patch, MLD part will be added.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before forwarding multicast traffic, the amt interface establishes between
gateway and relay. In order to establish, amt defined some message type
and those message flow looks like the below.
Gateway Relay
------- -----
: Request :
[1] | N |
|---------------------->|
| Membership Query | [2]
| N,MAC,gADDR,gPORT |
|<======================|
[3] | Membership Update |
| ({G:INCLUDE({S})}) |
|======================>|
| |
---------------------:-----------------------:---------------------
| | | |
| | *Multicast Data | *IP Packet(S,G) |
| | gADDR,gPORT |<-----------------() |
| *IP Packet(S,G) |<======================| |
| ()<-----------------| | |
| | | |
---------------------:-----------------------:---------------------
~ ~
~ Request ~
[4] | N' |
|---------------------->|
| Membership Query | [5]
| N',MAC',gADDR',gPORT' |
|<======================|
[6] | |
| Teardown |
| N,MAC,gADDR,gPORT |
|---------------------->|
| | [7]
| Membership Update |
| ({G:INCLUDE({S})}) |
|======================>|
| |
---------------------:-----------------------:---------------------
| | | |
| | *Multicast Data | *IP Packet(S,G) |
| | gADDR',gPORT' |<-----------------() |
| *IP Packet (S,G) |<======================| |
| ()<-----------------| | |
| | | |
---------------------:-----------------------:---------------------
| |
: :
1. Discovery
- Sent by Gateway to Relay
- To find Relay unique ip address
2. Advertisement
- Sent by Relay to Gateway
- Contains the unique IP address
3. Request
- Sent by Gateway to Relay
- Solicit to receive 'Query' message.
4. Query
- Sent by Relay to Gateway
- Contains General Query message.
5. Update
- Sent by Gateway to Relay
- Contains report message.
6. Multicast Data
- Sent by Relay to Gateway
- encapsulated multicast traffic.
7. Teardown
- Not supported at this time.
Except for the Teardown message, it supports all messages.
In the next patch, IGMP/MLD logic will be added.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It adds definitions and control plane code for AMT.
this is very similar to udp tunneling interfaces such as gtp, vxlan, etc.
In the next patch, data plane code will be added.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski says:
====================
netdevsim: improve separation between device and bus
VF config falls strangely in between device and bus
responsibilities today. Because of this bus.c sticks fingers
directly into struct nsim_dev and we look at nsim_bus_dev
in many more places than necessary.
Make bus.c contain pure interface code, and move
the particulars of the logic (which touch on eswitch,
devlink reloads etc) to dev.c. Rename the functions
at the boundary of the interface to make the separation
clearer.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename functions serving as driver entry points
from nsim_dev_... to nsim_drv_... this makes the
API boundary between bus and dev clearer.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
max_vfs is a strange little beast because the file
hangs off of nsim's debugfs, but it configures a field
in the bus device. Move it to dev.c, let's look at it
as if the device driver was imposing VF limit based
on FW info (like pci_sriov_set_totalvfs()).
Again, when moving refactor the function not to hold
the vfs lock pointlessly while parsing the input.
Wrap the access from the read side in READ_ONCE()
to appease concurrency checkers. Do not check if
return value from snprintf() is negative...
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since "eswitch" configuration was added bus.c contains
a lot of device details which really belong to dev.c.
Restructure the code while moving it.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When netdevsim got split into the faux bus vfconfig ended
up in the bus device (think pci_dev) which is strange because
it contains very networky not to say netdevy information.
Move it to nsim_dev, which is the driver "priv" structure
for the device.
To make sure we don't race with probe/remove take
the device lock (much like PCI).
While at it remove the NULL-checking of vfconfigs.
It appears to be pointless.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Legacy VF NDOs look at num_vfs and then based on that
index into vfconfig. If we don't rtnl_lock() num_vfs
may get set to 0 and vfconfig freed/replaced while
the NDO is running.
We don't need to protect replacing vfconfig since it's
only done when num_vfs is 0.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski says:
====================
improve ethtool/rtnl vs devlink locking
During ethtool netlink development we decided to move some of
the commmands to devlink. Since we don't want drivers to implement
both devlink and ethtool version of the commands ethtool ioctl
falls back to calling devlink. Unfortunately devlink locks must
be taken before rtnl_lock. This results in a questionable
dev_hold() / rtnl_unlock() / devlink / rtnl_lock() / dev_put()
pattern.
This method "works" but it working depends on drivers in question
not doing much in ethtool_ops->begin / complete, and on the netdev
not having needs_free_netdev set.
Since commit 437ebfd90a ("devlink: Count struct devlink consumers")
we can hold a reference on a devlink instance and prevent it from
going away (sort of like netdev with dev_hold()). We can use this
to create a more natural reference nesting where we get a ref on
the devlink instance and make the devlink call entirely outside
of the rtnl_lock section.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
devlink compat code needs to drop rtnl_lock to take
devlink->lock to ensure correct lock ordering.
This is problematic because we're not strictly guaranteed
that the netdev will not disappear after we re-lock.
It may open a possibility of nested ->begin / ->complete
calls.
Instead of calling into devlink under rtnl_lock take
a ref on the devlink instance and make the call after
we've dropped rtnl_lock.
We (continue to) assume that netdevs have an implicit
reference on the devlink returned from ndo_get_devlink_port
Note that ndo_get_devlink_port will now get called
under rtnl_lock. That should be fine since none of
the drivers seem to be taking serious locks inside
ndo_get_devlink_port.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow those who hold implicit reference on a devlink instance
to try to take a full ref on it. This will be used from netdev
code which has an implicit ref because of driver call ordering.
Note that after recent changes devlink_unregister() may happen
before netdev unregister, but devlink_free() should still happen
after, so we are safe to try, but we can't just refcount_inc()
and assume it's not zero.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to increase the lifetime of the data for .get_info
and .flash_update beyond their handlers inside rtnl_lock.
Allocate a union on the heap and use it instead.
Note that we now copy the ethcmd before we lookup dev,
hopefully there is no crazy user space depending on error
codes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't take the lock in net/core/dev_ioctl.c,
we'll have things to do outside rtnl_lock soon.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dexuan Cui says:
====================
net: mana: some misc patches
Patch 1 is a small fix.
Patch 2 reports OS info to the PF driver.
Before the patch, the req fields were all zeros.
Patch 3 fixes and cleans up the error handling of HWC creation failure.
Patch 4 adds the callbacks for hibernation/kexec. It's based on patch 3.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement the suspend/resume/shutdown callbacks for hibernation/kexec.
Add mana_gd_setup() and mana_gd_cleanup() for some common code, and
use them in the mand_gd_* callbacks.
Reuse mana_probe/remove() for the hibernation path.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently when the HWC creation fails, the error handling is flawed,
e.g. if mana_hwc_create_channel() -> mana_hwc_establish_channel() fails,
the resources acquired in mana_hwc_init_queues() is not released.
Enhance mana_hwc_destroy_channel() to do the proper cleanup work and
call it accordingly.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PF driver might use the OS info for statistical purposes.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the correct port index rather than 0.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mat Martineau says:
====================
mptcp: Some selftest improvements
Here are a couple of selftest changes for MPTCP.
Patch 1 fixes a mistake where the wrong protocol (TCP vs MPTCP) could be
requested on the listening socket in some link failure tests.
Patch 2 refactors the simulataneous flow tests to improve timing
accuracy and give more consistent results.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the simult_flows.sh self-tests are not very stable,
especially when running on slow VMs.
The tests measure runtime for transfers on multiple subflows
and check that the time is near the theoretical maximum.
The current test infra introduces a bit of jitter in test
runtime, due to multiple explicit delays. Additionally the
runtime is measured by the shell script wrapper. On a slow
VM, the script overhead is measurable and subject to relevant
jitter.
One solution to make the test more stable would be adding more
slack to the expected time; that could possibly hide real
regressions. Instead move the measurement inside the command
doing the transfer, and drop most unneeded sleeps.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In listener_ns, we should pass srv_proto argument to mptcp_connect command,
not cl_proto.
Fixes: 7d1e6f1639 ("selftests: mptcp: add testcase for active-back")
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we get CRQ_INIT, we set errno to -EIO and first call complete() to
notify the waiter. Then we try to schedule a FAILOVER reset. If this
occurs while adapter is in PROBING state, ibmvnic_reset() changes the
error code to EAGAIN and returns without scheduling the FAILOVER. The
purpose of setting error code to EAGAIN is to ask the waiter to retry.
But due to the earlier complete() call, the waiter may already have seen
the -EIO response and decided not to retry. This can cause intermittent
failures when bringing up ibmvnic adapters during boot, specially in
in kexec/kdump kernels.
Defer the complete() call until after scheduling the reset.
Also streamline the error code to EAGAIN. Don't see why we need EIO
sometimes. All 3 callers of ibmvnic_reset_init() can handle EAGAIN.
Fixes: 17c8705838 ("ibmvnic: Return error code if init interrupted by transport event")
Reported-by: Vaishnavi Bhat <vaish123@in.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Soon after registering a CRQ it is possible that we get a fail over or
maybe a CRQ_INIT from the VIOS while interrupts were disabled.
Look for any such CRQs after enabling interrupts.
Otherwise we can intermittently fail to bring up ibmvnic adapters during
boot, specially in kexec/kdump kernels.
Fixes: 032c5e8284 ("Driver for IBM System i/p VNIC protocol")
Reported-by: Vaishnavi Bhat <vaish123@in.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If adapter's resetting bit is on, discard the packet but don't stop the
transmit queue - instead leave that to the reset code. With this change,
it is possible that we may get several calls to ibmvnic_xmit() that simply
discard packets and return.
But if we stop the queue here, we might end up doing so just after
__ibmvnic_open() started the queues (during a hard/soft reset) and before
the ->resetting bit was cleared. If that happens, there will be no one to
restart queue and transmissions will be blocked indefinitely.
This can cause a TIMEOUT reset and with auto priority failover enabled,
an unnecessary FAILOVER reset to less favored backing device and then a
FAILOVER back to the most favored backing device. If we hit the window
repeatedly, we can get stuck in a loop of TIMEOUT, FAILOVER, FAILOVER
resets leaving the adapter unusable for extended periods of time.
Fixes: 7f5b030830 ("ibmvnic: Free skb's in cases of failure in transmit")
Reported-by: Abdul Haleem <abdhalee@in.ibm.com>
Reported-by: Vaishnavi Bhat <vaish123@in.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski says:
====================
udp6: allow SO_MARK ctrl msg to affect routing
Looks like SO_MARK from cmsg does not affect routing policy.
This seems accidental.
I opted for net because of the discrepancy between IPv4
and IPv6, but it never worked and doesn't cause crashes..
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Before fix:
| Case IPv6 rejection returned 0, expected 1
|FAIL - 1/4 cases failed
With the fix:
| OK
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit c6af0c227a ("ip: support SO_MARK cmsg")
added propagation of SO_MARK from cmsg to skb->mark.
For IPv4 and raw sockets the mark also affects route
lookup, but in case of IPv6 the flow info is
initialized before cmsg is parsed.
Fixes: c6af0c227a ("ip: support SO_MARK cmsg")
Reported-and-tested-by: Xintong Hu <huxintong@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The tunnel_type check only allows for "netif_is_gretap", but for
OVS the port is actually "netif_is_ip6gretap" when setting up GRE
for ipv6, which means offloading request was rejected before.
Therefore, adding "netif_is_ip6gretap" allow ipv6gretap interface
for offloading.
Signed-off-by: Yu Xiao <yu.xiao@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new DSA switch operation, phylink_get_interfaces, which should
fill in which PHY_INTERFACE_MODE_* are supported by given port.
Use this before phylink_create() to fill phylinks supported_interfaces
member, allowing phylink to determine which PHY_INTERFACE_MODEs are
supported.
Signed-off-by: Marek Behún <kabel@kernel.org>
[tweaked patch and description to add more complete support -- rmk]
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
100GbE Intel Wired LAN Driver Updates 2021-10-29
This series contains updates to ice and iavf drivers and virtchnl header
file.
Brett removes vlan_promisc argument from a function call for ice driver.
In the virtchnl header file he removes an unused, reserved define and
converts raw value defines to instead use the BIT macro.
Marcin adds syncing of MAC addresses when creating switchdev VFs to
remove error messages on link up and stops showing buffer information
for port representors to remove duplicated entries being displayed for
ice driver.
Karen introduces a helper to go from pci_dev to iavf_adapter in the
iavf driver.
Przemyslaw fixes an issue where iavf was attempting to free IRQs before
calling disable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2021-10-30
Just two minor changes this time:
1) Remove some superfluous header files from xfrm4_tunnel.c
From Mianhan Liu.
2) Simplify some error checks in xfrm_input().
From luo penghao.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Use array_size() in ebtables, from Gustavo A. R. Silva.
2) Attach IPS_ASSURED to internal UDP stream state, reported by
Maciej Zenczykowski.
3) Add NFT_META_IFTYPE to match on the interface type either
from ingress or egress.
4) Generalize pktinfo->tprot_set to flags field.
5) Allow to match on inner headers / payload data.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
1) Minor trivial refactoring and improvements
2) Check for unsupported parameters fields in SW steering
3) Support TC offload for OVS internal port, from Ariel, see below.
Ariel Levkovich says:
=====================
Support HW offload of TC rules involving OVS internal port
device type as the filter device or the destination
device.
The support is for flows which explicitly use the internal
port as source or destination device as well as indirect offload
for flows performing tunnel set or unset via a tunnel device
and the internal port is the tunnel overlay device.
Since flows with internal port as source port are added
as egress rules while redirecting to internal port is done
as an ingress redirect, the series introduces the necessary
changes in mlx5_core driver to support the new types of flows
and actions.
=====================
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmF8X0sACgkQSD+KveBX
+j5PsQf/RfsE+spW0yJriJQ6Et+o+/CYR+AQYat5MaXjRw8uMz6uBcfXWCIBbYjw
OwNP4ZagWXIHMkelj2Ap0Qlu4yqkUBy1A0le7HcAzOeje1vc9BObS15w9pJvQ9cp
br3ZK5VZnQccSfF/LQpSjlGhD9083kETA2uXlCz7vitn8MVaya6ue6GU+wFC4Wnz
LjOJ4PMXCEfhpA+efD0nD4EK6FJjqvJoVQkxWNmgOW7yg5PcyWXZD/tsDZUI8DGl
0GlnM6W2H8bC0YhW01cnOsWPU+vtMLCsaF0YKqsLhnWUsaYSD5lXPIHqH6VpucZ7
LSv/c2U9pBnWkf7UoFyuEeQxAhz1rg==
=Uxa9
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2021-10-29' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2021-10-29
1) Minor trivial refactoring and improvements
2) Check for unsupported parameters fields in SW steering
3) Support TC offload for OVS internal port, from Ariel, see below.
Ariel Levkovich says:
=====================
Support HW offload of TC rules involving OVS internal port
device type as the filter device or the destination
device.
The support is for flows which explicitly use the internal
port as source or destination device as well as indirect offload
for flows performing tunnel set or unset via a tunnel device
and the internal port is the tunnel overlay device.
Since flows with internal port as source port are added
as egress rules while redirecting to internal port is done
as an ingress redirect, the series introduces the necessary
changes in mlx5_core driver to support the new types of flows
and actions.
=====================
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix boolreturn.cocci warnings:
./arch/riscv/kvm/mmu.c:603:9-10: WARNING: return of 0/1 in function
'kvm_age_gfn' with return type bool
./arch/riscv/kvm/mmu.c:582:9-10: WARNING: return of 0/1 in function
'kvm_set_spte_gfn' with return type bool
./arch/riscv/kvm/mmu.c:621:9-10: WARNING: return of 0/1 in function
'kvm_test_age_gfn' with return type bool
./arch/riscv/kvm/mmu.c:568:9-10: WARNING: return of 0/1 in function
'kvm_unmap_gfn_range' with return type bool
Signed-off-by: Bixuan Cui <cuibixuan@linux.alibaba.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Fix a kernel crash which happens on PA1.x CPUs while initializing the
FTRACE/KPROBE breakpoints. The PTE table entries for the fixmap area
were not created correctly.
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: ccfbc68d41 ("parisc: add set_fixmap()/clear_fixmap()")
Cc: stable@vger.kernel.org # v5.2+
Add rules to forward packets to the net device's TIR only if the
destination MAC is equal to the configured MAC. This is required to
prevent the netdevice from receiving traffic not destined to its
configured MAC.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Link: https://lore.kernel.org/r/20211026175519.87795-9-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Add code to accept MAC configuration through vdpa tool. The MAC is
written into the config struct and later can be retrieved through
get_config().
Examples:
1. Configure MAC while adding a device:
$ vdpa dev add mgmtdev pci/0000:06:00.2 name vdpa0 mac 00:11:22:33:44:55
2. Show configured params:
$ vdpa dev config show
vdpa0: mac 00:11:22:33:44:55 link down link_announce false max_vq_pairs 8 mtu 1500
Signed-off-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20211026175519.87795-8-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cited patch in the fixes tag clears the features bit during reset.
mlx5 vdpa device feature bits are static decided by device capabilities.
These feature bits (including VIRTIO_NET_F_MAC) are initialized during
device addition time.
Clearing features bit in reset callback cleared the VIRTIO_NET_F_MAC. Due
to this, MAC address provided by the device is not honored.
Fix it by not clearing the static feature bits during reset.
Fixes: 0686082dbf ("vdpa: Add reset callback in vdpa_config_ops")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20211026175519.87795-7-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Enable user to set the mac address and mtu so that each vdpa device
can have its own user specified mac address and mtu.
Now that user is enabled to set the mac address, remove the module
parameter for same.
And example of setting mac addr and mtu and view the configuration:
$ vdpa mgmtdev show
vdpasim_net:
supported_classes net
$ vdpa dev add name bar mgmtdev vdpasim_net mac 00:11:22:33:44:55 mtu 9000
$ vdpa dev config show
bar: mac 00:11:22:33:44:55 link up link_announce false mtu 9000
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20211026175519.87795-6-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
$ vdpa dev add name bar mgmtdev vdpasim_net mac 00:11:22:33:44:55 mtu 9000
$ vdpa dev config show
bar: mac 00:11:22:33:44:55 link up link_announce false mtu 9000
$ vdpa dev config show -jp
{
"config": {
"bar": {
"mac": "00:11:22:33:44:55",
"link ": "up",
"link_announce ": false,
"mtu": 9000,
}
}
}
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20211026175519.87795-5-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
As subsequent patch adds new structure field with comment, move the
structure comment to follow kernel coding style.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20211026175519.87795-4-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce a command to query a device config layout.
An example query of network vdpa device:
$ vdpa dev add name bar mgmtdev vdpasim_net
$ vdpa dev config show
bar: mac 00:35:09:19:48:05 link up link_announce false mtu 1500
$ vdpa dev config show -jp
{
"config": {
"bar": {
"mac": "00:35:09:19:48:05",
"link ": "up",
"link_announce ": false,
"mtu": 1500,
}
}
}
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20211026175519.87795-3-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Subsequent patches enable get and set configuration either
via management device or via vdpa device' config ops.
This requires synchronization between multiple callers to get and set
config callbacks. Features setting also influence the layout of the
configuration fields endianness.
To avoid exposing synchronization primitives to callers, introduce
helper for setting the configuration and use it.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20211026175519.87795-2-parav@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We never tries to use used length, so the patch prevents the virtio
core from validating used length.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20211027022107.14357-5-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We never tries to use used length, so the patch prevents the virtio
core from validating used length.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20211027022107.14357-4-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Taehee Yoo