Users on darp6 that do not have Open EC firmware have reported crashes
on boot. Correct the error handling for the input device to fix it.
Managed devices do not need to be explicitly unregistered or freed, as
this is handled by devres. Drop the call to input_free_device.
Fixes: 0de30fc684 ("platform/x86: system76_acpi: Replace Fn+F2 function for OLED models")
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Link: https://lore.kernel.org/r/20211030154213.2515-1-tcrawford@system76.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
ltp test futex_wake04 without THP enabled leads to below bt:
[<ffffffff80a03728>] BUG+0x0/0x8
[<ffffffff80a0624c>] internal_get_user_pages_fast+0x81c/0x820
[<ffffffff8093ac18>] get_futex_key+0xa0/0x480
[<ffffffff8093b074>] futex_wait_setup+0x7c/0x1a8
[<ffffffff8093b2c0>] futex_wait+0x120/0x228
[<ffffffff8093dbe8>] do_futex+0x140/0xbd8
[<ffffffff8093e78c>] sys_futex+0x10c/0x1c0
[<ffffffff808703d0>] syscall_common+0x34/0x58
Move pmd_write() and pmd_page() from TRANSPARENT_HUGEPAGE scope to
MIPS_HUGE_TLB_SUPPORT scope, because both THP and HUGETLB will need
them.
Signed-off-by: Zhaolong Zhang <zhangzl2013@126.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
mips_cm_error_report() extracts the cause and other cause from the error
register using shifts. This works fine for the former, as it is stored
in the top bits, and the shift will thus remove all non-related bits.
However, the latter is stored in the bottom bits, hence thus needs masking
to get rid of non-related bits. Without such masking, using it as an
index into the cm2_causes[] array will lead to an out-of-bounds access,
probably causing a crash.
Fix this by using FIELD_GET() instead. Bite the bullet and convert all
MIPS CM handling to the bitfield API, to improve readability and safety.
Fixes: 3885c2b463 ("MIPS: CM: Add support for reporting CM cache errors")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
For operations that create vnodes on the server such as CreateFile,
MakeDir or Symlink, the server will store its own current time as
the mtime if the client doesn't pass in a time in the accompanying
StoreStatus structure.
If the server and client clocks are not well synchronized, the client
may see timestamps in the future or inconsistent dependency checks
with "make" for files that are not modified after creation:
make[2]: Warning: File 'arch/x86/kernel/apic/modules.order' has
modification time 0.14 s in the future
make[2]: warning: Clock skew detected. Your build may be incomplete.
This is already handled correctly for non yfs operations; also
set the mtime for the corresponding yfs operations.
Changes:
v3: Replace S_IRWXUGO with 0777, per checkpatch
v2: [dhowells] Merge the two xdr_encode_YFSStoreStatus*() functions together
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: http://lists.infradead.org/pipermail/linux-afs/2021-October/004395.html
Apply the PB51ED PCI quirk to the Clevo PC70HS. Fixes audio output from
the internal speakers.
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211101162134.5336-1-tcrawford@system76.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull crypto updates from Herbert Xu:
"API:
- Delay boot-up self-test for built-in algorithms
Algorithms:
- Remove fallback path on arm64 as SIMD now runs with softirq off
Drivers:
- Add Keem Bay OCS ECC Driver"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (61 commits)
crypto: testmgr - fix wrong key length for pkcs1pad
crypto: pcrypt - Delay write to padata->info
crypto: ccp - Make use of the helper macro kthread_run()
crypto: sa2ul - Use the defined variable to clean code
crypto: s5p-sss - Add error handling in s5p_aes_probe()
crypto: keembay-ocs-ecc - Add Keem Bay OCS ECC Driver
dt-bindings: crypto: Add Keem Bay ECC bindings
crypto: ecc - Export additional helper functions
crypto: ecc - Move ecc.h to include/crypto/internal
crypto: engine - Add KPP Support to Crypto Engine
crypto: api - Do not create test larvals if manager is disabled
crypto: tcrypt - fix skcipher multi-buffer tests for 1420B blocks
hwrng: s390 - replace snprintf in show functions with sysfs_emit
crypto: octeontx2 - set assoclen in aead_do_fallback()
crypto: ccp - Fix whitespace in sev_cmd_buffer_len()
hwrng: mtk - Force runtime pm ops for sleep ops
crypto: testmgr - Only disable migration in crypto_disable_simd_for_test()
crypto: qat - share adf_enable_pf2vf_comms() from adf_pf2vf_msg.c
crypto: qat - extract send and wait from adf_vf2pf_request_version()
crypto: qat - add VF and PF wrappers to common send function
...
-----BEGIN PGP SIGNATURE-----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=WrEw
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20211101' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"Add some additional audit logging to capture the openat2() syscall
open_how struct info.
Previous variations of the open()/openat() syscalls allowed audit
admins to inspect the syscall args to get the information contained in
the new open_how struct used in openat2()"
* tag 'audit-pr-20211101' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: return early if the filter rule has a lower priority
audit: add OPENAT2 record to list "how" info
audit: add support for the openat2 syscall
audit: replace magic audit syscall class numbers with macros
lsm_audit: avoid overloading the "key" audit field
audit: Convert to SPDX identifier
audit: rename struct node to struct audit_node to prevent future name collisions
-----BEGIN PGP SIGNATURE-----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=sb8J
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20211101' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
- Add LSM/SELinux/Smack controls and auditing for io-uring.
As usual, the individual commit descriptions have more detail, but we
were basically missing two things which we're adding here:
+ establishment of a proper audit context so that auditing of
io-uring ops works similarly to how it does for syscalls (with
some io-uring additions because io-uring ops are *not* syscalls)
+ additional LSM hooks to enable access control points for some of
the more unusual io-uring features, e.g. credential overrides.
The additional audit callouts and LSM hooks were done in conjunction
with the io-uring folks, based on conversations and RFC patches
earlier in the year.
- Fixup the binder credential handling so that the proper credentials
are used in the LSM hooks; the commit description and the code
comment which is removed in these patches are helpful to understand
the background and why this is the proper fix.
- Enable SELinux genfscon policy support for securityfs, allowing
improved SELinux filesystem labeling for other subsystems which make
use of securityfs, e.g. IMA.
* tag 'selinux-pr-20211101' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
security: Return xattr name from security_dentry_init_security()
selinux: fix a sock regression in selinux_ip_postroute_compat()
binder: use cred instead of task for getsecid
binder: use cred instead of task for selinux checks
binder: use euid from cred instead of using task
LSM: Avoid warnings about potentially unused hook variables
selinux: fix all of the W=1 build warnings
selinux: make better use of the nf_hook_state passed to the NF hooks
selinux: fix race condition when computing ocontext SIDs
selinux: remove unneeded ipv6 hook wrappers
selinux: remove the SELinux lockdown implementation
selinux: enable genfscon labeling for securityfs
Smack: Brutalist io_uring support
selinux: add support for the io_uring access controls
lsm,io_uring: add LSM hooks to io_uring
io_uring: convert io_uring to the secure anon inode interface
fs: add anon_inode_getfile_secure() similar to anon_inode_getfd_secure()
audit: add filtering for io_uring records
audit,io_uring,io-wq: add some basic audit support to io_uring
audit: prepare audit_context for use in calling contexts beyond syscalls
This pull request contains the following branches:
fixes.2021.10.07a: Miscellaneous fixes.
scftorture.2021.09.16a: smp_call_function torture-test updates, most
notably better checking of module parameters.
tasks.2021.09.15a: Tasks-trace RCU updates that fix a number of rare
but important race-condition bugs.
torture.2021.09.13b: Other torture-test updates, most notably
better checking of module parameters. In addition, rcutorture
may now be run on CONFIG_PREEMPT_RT kernels.
torturescript.2021.09.16a: Torture-test scripting updates, most notably
specifying the new CONFIG_KCSAN_STRICT kconfig option rather
than maintaining an ever-changing list of individual KCSAN
kconfig options.
-----BEGIN PGP SIGNATURE-----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=nmaP
-----END PGP SIGNATURE-----
Merge tag 'rcu.2021.11.01a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Miscellaneous fixes
- Torture-test updates for smp_call_function(), most notably improved
checking of module parameters.
- Tasks-trace RCU updates that fix a number of rare but important
race-condition bugs.
- Other torture-test updates, most notably better checking of module
parameters. In addition, rcutorture may once again be run on
CONFIG_PREEMPT_RT kernels.
- Torture-test scripting updates, most notably specifying the new
CONFIG_KCSAN_STRICT kconfig option rather than maintaining an
ever-changing list of individual KCSAN kconfig options.
* tag 'rcu.2021.11.01a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (46 commits)
rcu: Fix rcu_dynticks_curr_cpu_in_eqs() vs noinstr
rcu: Always inline rcu_dynticks_task*_{enter,exit}()
torture: Make kvm-remote.sh print size of downloaded tarball
torture: Allot 1G of memory for scftorture runs
tools/rcu: Add an extract-stall script
scftorture: Warn on individual scf_torture_init() error conditions
scftorture: Count reschedule IPIs
scftorture: Account for weight_resched when checking for all zeroes
scftorture: Shut down if nonsensical arguments given
scftorture: Allow zero weight to exclude an smp_call_function*() category
rcu: Avoid unneeded function call in rcu_read_unlock()
rcu-tasks: Update comments to cond_resched_tasks_rcu_qs()
rcu-tasks: Fix IPI failure handling in trc_wait_for_one_reader
rcu-tasks: Fix read-side primitives comment for call_rcu_tasks_trace
rcu-tasks: Clarify read side section info for rcu_tasks_rude GP primitives
rcu-tasks: Correct comparisons for CPU numbers in show_stalled_task_trace
rcu-tasks: Correct firstreport usage in check_all_holdout_tasks_trace
rcu-tasks: Fix s/rcu_add_holdout/trc_add_holdout/ typo in comment
rcu-tasks: Move RTGS_WAIT_CBS to beginning of rcu_tasks_kthread() loop
rcu-tasks: Fix s/instruction/instructions/ typo in comment
...
- kprobes: Restructured stack unwinder to show properly on x86 when a stack
dump happens from a kretprobe callback.
- Fix to bootconfig parsing
- Have tracefs allow owner and group permissions by default (only denying
others). There's been pressure to allow non root to tracefs in a
controlled fashion, and using groups is probably the safest.
- Bootconfig memory managament updates.
- Bootconfig clean up to have the tools directory be less dependent on
changes in the kernel tree.
- Allow perf to be traced by function tracer.
- Rewrite of function graph tracer to be a callback from the function tracer
instead of having its own trampoline (this change will happen on an arch
by arch basis, and currently only x86_64 implements it).
- Allow multiple direct trampolines (bpf hooks to functions) be batched
together in one synchronization.
- Allow histogram triggers to add variables that can perform calculations
against the event's fields.
- Use the linker to determine architecture callbacks from the ftrace
trampoline to allow for proper parameter prototypes and prevent warnings
from the compiler.
- Extend histogram triggers to key off of variables.
- Have trace recursion use bit magic to determine preempt context over if
branches.
- Have trace recursion disable preemption as all use cases do anyway.
- Added testing for verification of tracing utilities.
- Various small clean ups and fixes.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYYBdxhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qp1sAQD2oYFwaG3sx872gj/myBcHIBSKdiki
Hry5csd8zYDBpgD+Poylopt5JIbeDuoYw/BedgEXmscZ8Qr7VzjAXdnv/Q4=
=Loz8
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- kprobes: Restructured stack unwinder to show properly on x86 when a
stack dump happens from a kretprobe callback.
- Fix to bootconfig parsing
- Have tracefs allow owner and group permissions by default (only
denying others). There's been pressure to allow non root to tracefs
in a controlled fashion, and using groups is probably the safest.
- Bootconfig memory managament updates.
- Bootconfig clean up to have the tools directory be less dependent on
changes in the kernel tree.
- Allow perf to be traced by function tracer.
- Rewrite of function graph tracer to be a callback from the function
tracer instead of having its own trampoline (this change will happen
on an arch by arch basis, and currently only x86_64 implements it).
- Allow multiple direct trampolines (bpf hooks to functions) be batched
together in one synchronization.
- Allow histogram triggers to add variables that can perform
calculations against the event's fields.
- Use the linker to determine architecture callbacks from the ftrace
trampoline to allow for proper parameter prototypes and prevent
warnings from the compiler.
- Extend histogram triggers to key off of variables.
- Have trace recursion use bit magic to determine preempt context over
if branches.
- Have trace recursion disable preemption as all use cases do anyway.
- Added testing for verification of tracing utilities.
- Various small clean ups and fixes.
* tag 'trace-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (101 commits)
tracing/histogram: Fix semicolon.cocci warnings
tracing/histogram: Fix documentation inline emphasis warning
tracing: Increase PERF_MAX_TRACE_SIZE to handle Sentinel1 and docker together
tracing: Show size of requested perf buffer
bootconfig: Initialize ret in xbc_parse_tree()
ftrace: do CPU checking after preemption disabled
ftrace: disable preemption when recursion locked
tracing/histogram: Document expression arithmetic and constants
tracing/histogram: Optimize division by a power of 2
tracing/histogram: Covert expr to const if both operands are constants
tracing/histogram: Simplify handling of .sym-offset in expressions
tracing: Fix operator precedence for hist triggers expression
tracing: Add division and multiplication support for hist triggers
tracing: Add support for creating hist trigger variables from literal
selftests/ftrace: Stop tracing while reading the trace file by default
MAINTAINERS: Update KPROBES and TRACING entries
test_kprobes: Move it from kernel/ to lib/
docs, kprobes: Remove invalid URL and add new reference
samples/kretprobes: Fix return value if register_kretprobe() failed
lib/bootconfig: Fix the xbc_get_info kerneldoc
...
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-11-01
We've added 181 non-merge commits during the last 28 day(s) which contain
a total of 280 files changed, 11791 insertions(+), 5879 deletions(-).
The main changes are:
1) Fix bpf verifier propagation of 64-bit bounds, from Alexei.
2) Parallelize bpf test_progs, from Yucong and Andrii.
3) Deprecate various libbpf apis including af_xdp, from Andrii, Hengqi, Magnus.
4) Improve bpf selftests on s390, from Ilya.
5) bloomfilter bpf map type, from Joanne.
6) Big improvements to JIT tests especially on Mips, from Johan.
7) Support kernel module function calls from bpf, from Kumar.
8) Support typeless and weak ksym in light skeleton, from Kumar.
9) Disallow unprivileged bpf by default, from Pawan.
10) BTF_KIND_DECL_TAG support, from Yonghong.
11) Various bpftool cleanups, from Quentin.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (181 commits)
libbpf: Deprecate AF_XDP support
kbuild: Unify options for BTF generation for vmlinux and modules
selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
selftests/bpf: Fix also no-alu32 strobemeta selftest
bpf: Add missing map_delete_elem method to bloom filter map
selftests/bpf: Add bloom map success test for userspace calls
bpf: Add alignment padding for "map_extra" + consolidate holes
bpf: Bloom filter map naming fixups
selftests/bpf: Add test cases for struct_ops prog
bpf: Add dummy BPF STRUCT_OPS for test purpose
bpf: Factor out helpers for ctx access checking
bpf: Factor out a helper to prepare trampoline for struct_ops prog
selftests, bpf: Fix broken riscv build
riscv, libbpf: Add RISC-V (RV64) support to bpf_tracing.h
tools, build: Add RISC-V to HOSTARCH parsing
riscv, bpf: Increase the maximum number of iterations
selftests, bpf: Add one test for sockmap with strparser
selftests, bpf: Fix test_txmsg_ingress_parser error
...
====================
Link: https://lore.kernel.org/r/20211102013123.9005-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This tests the sysctl options for ARP/ND:
/net/ipv4/conf/<iface>/arp_evict_nocarrier
/net/ipv4/conf/all/arp_evict_nocarrier
/net/ipv6/conf/<iface>/ndisc_evict_nocarrier
/net/ipv6/conf/all/ndisc_evict_nocarrier
Signed-off-by: James Prestwood <prestwoj@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In most situations the neighbor discovery cache should be cleared on a
NOCARRIER event which is currently done unconditionally. But for wireless
roams the neighbor discovery cache can and should remain intact since
the underlying network has not changed.
This patch introduces a sysctl option ndisc_evict_nocarrier which can
be disabled by a wireless supplicant during a roam. This allows packets
to be sent after a roam immediately without having to wait for
neighbor discovery.
A user reported roughly a 1 second delay after a roam before packets
could be sent out (note, on IPv4). This delay was due to the ARP
cache being cleared. During testing of this same scenario using IPv6
no delay was noticed, but regardless there is no reason to clear
the ndisc cache for wireless roams.
Signed-off-by: James Prestwood <prestwoj@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This change introduces a new sysctl parameter, arp_evict_nocarrier.
When set (default) the ARP cache will be cleared on a NOCARRIER event.
This new option has been defaulted to '1' which maintains existing
behavior.
Clearing the ARP cache on NOCARRIER is relatively new, introduced by:
commit 859bd2ef1f
Author: David Ahern <dsahern@gmail.com>
Date: Thu Oct 11 20:33:49 2018 -0700
net: Evict neighbor entries on carrier down
The reason for this changes is to prevent the ARP cache from being
cleared when a wireless device roams. Specifically for wireless roams
the ARP cache should not be cleared because the underlying network has not
changed. Clearing the ARP cache in this case can introduce significant
delays sending out packets after a roam.
A user reported such a situation here:
https://lore.kernel.org/linux-wireless/CACsRnHWa47zpx3D1oDq9JYnZWniS8yBwW1h0WAVZ6vrbwL_S0w@mail.gmail.com/
After some investigation it was found that the kernel was holding onto
packets until ARP finished which resulted in this 1 second delay. It
was also found that the first ARP who-has was never responded to,
which is actually what caues the delay. This change is more or less
working around this behavior, but again, there is no reason to clear
the cache on a roam anyways.
As for the unanswered who-has, we know the packet made it OTA since
it was seen while monitoring. Why it never received a response is
unknown. In any case, since this is a problem on the AP side of things
all that can be done is to work around it until it is solved.
Some background on testing/reproducing the packet delay:
Hardware:
- 2 access points configured for Fast BSS Transition (Though I don't
see why regular reassociation wouldn't have the same behavior)
- Wireless station running IWD as supplicant
- A device on network able to respond to pings (I used one of the APs)
Procedure:
- Connect to first AP
- Ping once to establish an ARP entry
- Start a tcpdump
- Roam to second AP
- Wait for operstate UP event, and note the timestamp
- Start pinging
Results:
Below is the tcpdump after UP. It was recorded the interface went UP at
10:42:01.432875.
10:42:01.461871 ARP, Request who-has 192.168.254.1 tell 192.168.254.71, length 28
10:42:02.497976 ARP, Request who-has 192.168.254.1 tell 192.168.254.71, length 28
10:42:02.507162 ARP, Reply 192.168.254.1 is-at ac:86:74:55:b0:20, length 46
10:42:02.507185 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 1, length 64
10:42:02.507205 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 2, length 64
10:42:02.507212 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 3, length 64
10:42:02.507219 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 4, length 64
10:42:02.507225 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 5, length 64
10:42:02.507232 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 6, length 64
10:42:02.515373 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 1, length 64
10:42:02.521399 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 2, length 64
10:42:02.521612 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 3, length 64
10:42:02.521941 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 4, length 64
10:42:02.522419 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 5, length 64
10:42:02.523085 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 6, length 64
You can see the first ARP who-has went out very quickly after UP, but
was never responded to. Nearly a second later the kernel retries and
gets a response. Only then do the ping packets go out. If an ARP entry
is manually added prior to UP (after the cache is cleared) it is seen
that the first ping is never responded to, so its not only an issue with
ARP but with data packets in general.
As mentioned prior, the wireless interface was also monitored to verify
the ping/ARP packet made it OTA which was observed to be true.
Signed-off-by: James Prestwood <prestwoj@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
New drivers:
- Maxim MAX6620
Notable functional enhancements:
- Add Asus WMI support to nct6775 driver, and list boards supporting it
- Move TMP461 support from tm401 driver to lm90 driver
- Add support for fanX_min, fanX_max and fanX_target to dell-smm driver,
and clean it up while doing so
- Extend mlxreg-fan driver to support multiple cooling devices and
multiple PWM channels. Also increase number of supported fan tachometers.
- Add a new customer ID (for ASRock) to nct6683 driver
- Make temperature/voltage sensors on nct7802 configurable
- Add mfg_id debugfs entry to pmbus/ibm-cffps driver
- Support configurable sense resistor values in pmbus/lm25066,
and fix various coefficients
- Use generic notification mechanism in raspberrypi driver
Notable cleanup:
- Convert various devicetree bindings to dtschema, and add missing bindings
- Convert i5500_temp and tmp103 drivers to devm_hwmon_device_register_with_info
- Clean up non-bool "valid" data fields
- Improve devicetree configurability for tmp421 driver
-----BEGIN PGP SIGNATURE-----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=v5CO
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New driver:
- Maxim MAX6620
Notable functional enhancements:
- Add Asus WMI support to nct6775 driver, and list boards supporting
it
- Move TMP461 support from tm401 driver to lm90 driver
- Add support for fanX_min, fanX_max and fanX_target to dell-smm
driver, and clean it up while doing so
- Extend mlxreg-fan driver to support multiple cooling devices and
multiple PWM channels. Also increase number of supported fan
tachometers.
- Add a new customer ID (for ASRock) to nct6683 driver
- Make temperature/voltage sensors on nct7802 configurable
- Add mfg_id debugfs entry to pmbus/ibm-cffps driver
- Support configurable sense resistor values in pmbus/lm25066, and
fix various coefficients
- Use generic notification mechanism in raspberrypi driver
Notable cleanups:
- Convert various devicetree bindings to dtschema, and add missing
bindings
- Convert i5500_temp and tmp103 drivers to
devm_hwmon_device_register_with_info
- Clean up non-bool "valid" data fields
- Improve devicetree configurability for tmp421 driver"
* tag 'hwmon-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (73 commits)
hwmon: (nct7802) Add of_node_put() before return
hwmon: (tmp401) Drop support for TMP461
hwmon: (lm90) Add basic support for TI TMP461
hwmon: (lm90) Introduce flag indicating extended temperature support
hwmon: (nct6775) add ProArt X570-CREATOR WIFI.
hwmon: (nct7802) Make temperature/voltage sensors configurable
dt-bindings: hwmon: Add nct7802 bindings
hwmon: (dell-smm) Speed up setting of fan speed
hwmon: (dell-smm) Add comment explaining usage of i8k_config_data[]
hwmon: (dell-smm) Return -ENOIOCTLCMD instead of -EINVAL
hwmon: (dell-smm) Use strscpy_pad()
hwmon: (dell-smm) Sort includes in alphabetical order
hwmon: (tmp421) Add of_node_put() before return
hwmon: (max31722) Warn about failure to put device in stand-by in .remove()
hwmon: (acpi_power_meter) Use acpi_bus_get_acpi_device()
hwmon: (dell-smm) Add support for fanX_min, fanX_max and fanX_target
dt-bindings: hwmon: allow specifying channels for tmp421
hwmon: (tmp421) ignore non-channel related DT nodes
hwmon: (tmp421) update documentation
hwmon: (tmp421) support HWMON_T_ENABLE
...
This is quite a quiet release for SPI, there's been a bit of cleanup to
the core from Uwe but nothing functionality wise. We have added several
new drivers, Cadence XSPI, Ingenic JZ47xx, Qualcomm SC7280 and SC7180
and Xilinx Versal OSPI.
There's a trivial conflict in the Tegra driver that's been causing
issues.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmGABLQACgkQJNaLcl1U
h9Bz2gf9FdjnFXXUQSDgz5tXbrcROCHAYyY9aI9xLFPXaup2ZacKFB5iQcCFaLAR
saOoiezNru+Y5MyyEhMcbRhyNeVNwTVven7r2SG6S3ldt3q6RaiDiBr5rUCaTNTj
AaatHLrpCfj4d/0Rgzh366BjbAthZQ9+f/c51pEfkoHyY8Kd0XJmi0pCuHnV8reT
vzJsGFctcc6Zkzp3M2bg0wG9T+OEJjeMMd/OeYHUFrfhvEsUm0ljRCy1/WRTQ0Fq
qlJO/m6YLo4a3D4bl/CH7WwsWrZ/rWEaL2/esyKH799E7MXOOY9D9YdRVU6m+hZS
pR1RjqqsXszIMkkviqbPtCA0tF7+4g==
=N0Jw
-----END PGP SIGNATURE-----
Merge tag 'spi-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This is quite a quiet release for SPI, there's been a bit of cleanup
to the core from Uwe but nothing functionality wise.
We have added several new drivers, Cadence XSPI, Ingenic JZ47xx,
Qualcomm SC7280 and SC7180 and Xilinx Versal OSPI"
* tag 'spi-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (41 commits)
spi: Convert NXP flexspi to json schema
spi: spi-geni-qcom: Add support for GPI dma
spi: fsi: Fix contention in the FSI2SPI engine
spi: spi-rpc-if: Check return value of rpcif_sw_init()
spi: tegra210-quad: Put device into suspend on driver removal
spi: tegra20-slink: Put device into suspend on driver removal
spi: bcm-qspi: Fix missing clk_disable_unprepare() on error in bcm_qspi_probe()
spi: at91-usart: replacing legacy gpio interface for gpiod
spi: replace snprintf in show functions with sysfs_emit
spi: cadence: Add of_node_put() before return
spi: orion: Add of_node_put() before goto
spi: cadence-quadspi: fix dma_unmap_single() call
spi: tegra20: fix build with CONFIG_PM_SLEEP=n
spi: bcm-qspi: add support for 3-wire mode for half duplex transfer
spi: bcm-qspi: Add mspi spcr3 32/64-bits xfer mode
spi: Make several public functions private to spi.c
spi: Reorder functions to simplify the next commit
spi: Remove unused function spi_busnum_to_master()
spi: Move comment about chipselect check to the right place
spi: fsi: Print status on error
...
Thanks to the removal of the unused TPS80021 driver the regulator
updates for this cycle actually have a negative diffstat. Otherwise
it's been quite a quiet release, lots of fixes and small improvements
with the biggest individual changes being several conversions of DT
bindings to YAML format.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmF//M0ACgkQJNaLcl1U
h9ByVQf/QapSey1s8ifh7Or3oiG7Ak6BdPYxiPIzhZIqjz4gXV8ySn8EedbH7moW
NcKpqokZ4qPD32fcET2WFQLb9tA8BNEQS1VwRKG+uhzPi3xBnIVj0gt8lNOAW57g
cUWeJhIbafaym33zB0xdDAukLHqjnx24C33Fz8QWaaQv/xRhaCrbzhala4WfXXyP
ucyOqSNnHZ+KX0tQsIG05b9jqca+VrNAyefY5jum2l2r2LFfGjQDv6g0HJEKfcF3
PSu+1RBFsYA3sPvzqzdtcuEs7hqalXVNGBfogCzNQ1HhK9z48R4J9lHtswDDk4EA
9aLYiid02UYRpRpT34z2TexpufW9kQ==
=5lYk
-----END PGP SIGNATURE-----
Merge tag 'regulator-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"Thanks to the removal of the unused TPS80021 driver the regulator
updates for this cycle actually have a negative diffstat.
Otherwise it's been quite a quiet release, lots of fixes and small
improvements with the biggest individual changes being several
conversions of DT bindings to YAML format"
* tag 'regulator-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (34 commits)
regulator: Don't error out fixed regulator in regulator_sync_voltage()
regulator: tps80031: Remove driver
regulator: Fix SY7636A breakage
regulator: uniphier: Add binding for NX1 SoC
regulator: uniphier: Add USB-VBUS compatible string for NX1 SoC
regulator: qcom,rpmh: Add compatible for PM6350
regulator: qcom-rpmh: Add PM6350 regulators
regulator: sy7636a: Remove requirement on sy7636a mfd
regulator: tps62360: replacing legacy gpio interface for gpiod
regulator: lp872x: Remove lp872x_dvs_state
regulator: lp872x: replacing legacy gpio interface for gpiod
regulator: dt-bindings: samsung,s5m8767: convert to dtschema
regulator: dt-bindings: samsung,s2mpa01: convert to dtschema
regulator: dt-bindings: samsung,s2m: convert to dtschema
dt-bindings: clock: samsung,s2mps11: convert to dtschema
regulator: dt-bindings: samsung,s5m8767: correct s5m8767,pmic-buck-default-dvs-idx property
regulator: s5m8767: do not use reset value as DVS voltage if GPIO DVS is disabled
regulator: dt-bindings: maxim,max8973: convert to dtschema
regulator: dt-bindings: maxim,max8997: convert to dtschema
regulator: dt-bindings: maxim,max8952: convert to dtschema
...
This update has a single change which will use the maximum transfer and
message sizes advertised by SPI controllers to configure limits within
the regmap core, ensuring better interoperation.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmF/6F8ACgkQJNaLcl1U
h9Calgf+PaI6wr17nU0/m4N50Vjat0bL7iBuEQYPKFWu963M0QasPZEKteJV7sa+
8XVxcBh43E2unQkY+iMfldmBIEfZJwmsaWecdxSair6cWcm8MT6agOOkl6KjiCHM
AQiPI2+UbXDHnPociBmyA+MqI3hWSPZIMirVC+3WAFGLs8wHuRe0G97egkcPh88a
doQ5f2Ei7eCgP4uy+p93S4QWXbsbQVm/yszw0BH0gaqnBylwUfQtU1vdlLyBXW4y
9bB1MnzCdlLbKf4bQd7NcjB2bA8lgAuZ3t5rJoRjZtnf+//fRTB1cu/UkLRFlZme
vsrt60wo52r2v5tiLKA4wrgcvEFR+A==
=8MR4
-----END PGP SIGNATURE-----
Merge tag 'regmap-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap update from Mark Brown:
"A single change to use the maximum transfer and message sizes
advertised by SPI controllers to configure limits within the
regmap core, ensuring better interoperation"
* tag 'regmap-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: spi: Set regmap max raw r/w from max_transfer_size
consolidate msm8994 type apcs_data
- mtk: fix clock id usage
- apple: add driver for ASC/M3 controllers
- pcc: reorganise PCC pcc_mbox_request_channel
add support for PCCT extended PCC subspaces
- misc: make use of devm_platform_ioremap_resource()
change Altera, PCC and Apple mailbox maintainers
-----BEGIN PGP SIGNATURE-----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=pnD9
-----END PGP SIGNATURE-----
Merge tag 'mailbox-v5.16' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
"qcom:
- add support for qcm2290
- consolidate msm8994 type apcs_data
mtk:
- fix clock id usage
apple:
- add driver for ASC/M3 controllers
pcc:
- reorganise PCC pcc_mbox_request_channel
- add support for PCCT extended PCC subspaces
misc:
- make use of devm_platform_ioremap_resource()
- change Altera, PCC and Apple mailbox maintainers"
* tag 'mailbox-v5.16' of git://git.linaro.org/landing-teams/working/fujitsu/integration: (38 commits)
mailbox: imx: support i.MX8ULP S4 MU
dt-bindings: mailbox: imx-mu: add i.MX8ULP S400 MU support
ACPI/PCC: Add maintainer for PCC mailbox driver
mailbox: pcc: Move bulk of PCCT parsing into pcc_mbox_probe
mailbox: pcc: Add support for PCCT extended PCC subspaces(type 3/4)
mailbox: pcc: Drop handling invalid bit-width in {read,write}_register
mailbox: pcc: Avoid accessing PCCT table in pcc_send_data and pcc_mbox_irq
mailbox: pcc: Add PCC register bundle and associated accessor functions
mailbox: pcc: Rename doorbell ack to platform interrupt ack register
mailbox: pcc: Use PCC mailbox channel pointer instead of standard
mailbox: pcc: Add pcc_mbox_chan structure to hold shared memory region info
mailbox: pcc: Consolidate subspace doorbell register parsing
mailbox: pcc: Consolidate subspace interrupt information parsing
mailbox: pcc: Refactor all PCC channel information into a structure
mailbox: pcc: Fix kernel doc warnings
mailbox: apple: Add driver for Apple mailboxes
dt-bindings: mailbox: Add Apple mailbox bindings
MAINTAINERS: Add Apple mailbox files
mailbox: mtk-cmdq: Fix local clock ID usage
mailbox: mtk-cmdq: Validate alias_id on probe
...
- Update maintainer and URL for the mmc-utils
- Set default label for slot-gpio in case of no con-id
- Convert MMC card DT bindings to a schema
- Add optional host specific tuning support for eMMC HS400
- Add error handling of add_disk()
MMC host:
- mtk-sd: Add host specific tuning support for eMMC HS400
- mtk-sd: Make DMA handling more robust
- dw_mmc: Prevent hangs for some data writes
- dw_mmc: Move away from using the ->init_card() callback
- mxs-mmc: Manage the regulator in the error path and in ->remove()
- sdhci-cadence: Add support for the Microchip MPFS variant
- sdhci-esdhc-imx: Add support for the NXP S32G2 variant
- sdhci-of-arasan: Add support for the Intel Thunder Bay variant
- sdhci-omap: Prepare to support more SoCs
- sdhci-omap: Add support for omap3 and omap4 variants
- sdhci-omap: Add support for power management
- sdhci-omap: Add support for system wakeups
- sdhci-msm: Add support for the msm8226 variant
- sdhci-sprd: Verify that the DLL locks according to spec
MEMSTICK:
- Add error handling of add_disk()
- A couple of small fixes and improvements
-----BEGIN PGP SIGNATURE-----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=W+gH
-----END PGP SIGNATURE-----
Merge tag 'mmc-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC and MEMSTICK updates from Ulf Hansson:
"MMC core:
- Update maintainer and URL for the mmc-utils
- Set default label for slot-gpio in case of no con-id
- Convert MMC card DT bindings to a schema
- Add optional host specific tuning support for eMMC HS400
- Add error handling of add_disk()
MMC host:
- mtk-sd: Add host specific tuning support for eMMC HS400
- mtk-sd: Make DMA handling more robust
- dw_mmc: Prevent hangs for some data writes
- dw_mmc: Move away from using the ->init_card() callback
- mxs-mmc: Manage the regulator in the error path and in ->remove()
- sdhci-cadence: Add support for the Microchip MPFS variant
- sdhci-esdhc-imx: Add support for the NXP S32G2 variant
- sdhci-of-arasan: Add support for the Intel Thunder Bay variant
- sdhci-omap: Prepare to support more SoCs
- sdhci-omap: Add support for omap3 and omap4 variants
- sdhci-omap: Add support for power management
- sdhci-omap: Add support for system wakeups
- sdhci-msm: Add support for the msm8226 variant
- sdhci-sprd: Verify that the DLL locks according to spec
MEMSTICK:
- Add error handling of add_disk()
- A couple of small fixes and improvements"
* tag 'mmc-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (60 commits)
docs: mmc: update maintainer name and URL
mmc: dw_mmc: exynos: Fix spelling mistake "candiates" -> candidates
MAINTAINERS: drop obsolete file pattern in SDHCI DRIVER section
mmc: sdhci-esdhc-imx: add NXP S32G2 support
dt-bindings: mmc: fsl-imx-esdhc: add NXP S32G2 support
mmc: dw_mmc: Drop use of ->init_card() callback
mmc: sdhci-omap: Fix build if CONFIG_PM_SLEEP is not set
mmc: sdhci-omap: Remove forward declaration of sdhci_omap_context_save()
memstick: r592: Fix a UAF bug when removing the driver
mmc: mxs-mmc: disable regulator on error and in the remove function
mmc: sdhci-omap: Configure optional wakeirq
mmc: sdhci-omap: Allow SDIO card power off and enable aggressive PM
mmc: sdhci-omap: Implement PM runtime functions
mmc: sdhci-omap: Add omap_offset to support omap3 and earlier
mmc: sdhci-omap: Handle voltages to add support omap4
dt-bindings: sdhci-omap: Update binding for legacy SoCs
mmc: sdhci-pci: Remove dead code (rst_n_gpio et al)
mmc: sdhci-pci: Remove dead code (cd_gpio, cd_irq et al)
mmc: sdhci-pci: Remove dead code (struct sdhci_pci_data et al)
mmc: sdhci: Remove unused prototype declaration in the header
...
A new type of low-level IPMI driver is added for direct communication
over the IPMI message bus without a BMC between the driver and the bus.
Other than that, lots of little bug fixes and enhancements.
-----BEGIN PGP SIGNATURE-----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=WxcC
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.16-1' of https://github.com/cminyard/linux-ipmi
Pull IPMI driver updates from Corey Minyard:
"A new type of low-level IPMI driver is added for direct communication
over the IPMI message bus without a BMC between the driver and the
bus.
Other than that, lots of little bug fixes and enhancements"
* tag 'for-linus-5.16-1' of https://github.com/cminyard/linux-ipmi:
ipmi: kcs_bmc: Fix a memory leak in the error handling path of 'kcs_bmc_serio_add_device()'
char: ipmi: replace snprintf in show functions with sysfs_emit
ipmi: ipmb: fix dependencies to eliminate build error
ipmi:ipmb: Add OF support
ipmi: bt: Add ast2600 compatible string
ipmi: bt-bmc: Use registers directly
ipmi: ipmb: Fix off-by-one size check on rcvlen
ipmi:ssif: Use depends on, not select, for I2C
ipmi: Add docs for the IPMI IPMB driver
ipmi: Add docs for IPMB direct addressing
ipmi:ipmb: Add initial support for IPMI over IPMB
ipmi: Add support for IPMB direct messages
ipmi: Export ipmb_checksum()
ipmi: Fix a typo
ipmi: Check error code before processing BMC response
ipmi:devintf: Return a proper error when recv buffer too small
ipmi: Disable some operations during a panic
ipmi:watchdog: Set panic count to proper value on a panic
list, attempt to solve that by using RCU.
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQRPfPO7r0eAhk010v0w5/Bqldv68gUCYX/LVQAKCRAw5/Bqldv6
8tGdAKCxfNbQXshDLhtAF5vRz2sSuxwchgCfdE4QTPU02G1h3qPVXmKVHJX3UVk=
=RxTC
-----END PGP SIGNATURE-----
Merge tag 'leds-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds
Pull LED updates from Pavel Machek:
"Johannes pointed out that locking is still problematic with triggers
list, attempt to solve that by using RCU"
* tag 'leds-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
leds: trigger: Disable CPU trigger on PREEMPT_RT
leds: trigger: use RCU to protect the led_cdevs list
led-class-flash: fix -Wrestrict warning
-----BEGIN PGP SIGNATURE-----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=eLup
-----END PGP SIGNATURE-----
Merge tag 'media/v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- New driver for SK Hynix Hi-846 8M pixel camera
- New driver for the ov13b10 camera
- New driver for Renesas R-Car ISP
- mtk-vcodec gained support for version 2 of decoder firmware ABI
- The legacy sir_ir driver got removed
- videobuf2: the vb2_mem_ops kAPI had some improvements
- lots of cleanups, fixes and new features at device drivers
* tag 'media/v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (328 commits)
media: venus: core: Add sdm660 DT compatible and resource struct
media: dt-bindings: media: venus: Add sdm660 dt schema
media: venus: vdec: decoded picture buffer handling during reconfig sequence
media: venus: Handle fatal errors during encoding and decoding
media: venus: helpers: Add helper to mark fatal vb2 error
media: venus: hfi: Check for sys error on session hfi functions
media: venus: Make sys_error flag an atomic bitops
media: venus: venc: Use pmruntime autosuspend
media: allegro: write vui parameters for HEVC
media: allegro: nal-hevc: implement generator for vui
media: allegro: write correct colorspace into SPS
media: allegro: extract nal value lookup functions to header
media: allegro: correctly scale the bit rate in SPS
media: allegro: remove external QP table
media: allegro: fix row and column in response message
media: allegro: add control to disable encoder buffer
media: allegro: add encoder buffer support
media: allegro: add pm_runtime support
media: allegro: lookup VCU settings
media: allegro: fix module removal if initialization failed
...
Fix warnings as:
arch/arm/boot/dts/qcom-sdx55-mtp.dt.yaml: ipa@1e40000: iommus: [[21, 1504, 0], [21, 1506, 0]] is too long
From schema: Documentation/devicetree/bindings/net/qcom,ipa.yaml
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20211026163240.131052-1-david@ixit.cz
Signed-off-by: Rob Herring <robh@kernel.org>
Use of the of_scan_flat_dt() function predates libfdt and is discouraged
as libfdt provides a nicer set of APIs. Rework __fdt_scan_reserved_mem()
to be called directly and use libfdt.
Cc: Frank Rowand <frowand.list@gmail.com>
Link: https://lore.kernel.org/r/20211029183615.2721777-1-robh@kernel.org/
Signed-off-by: Rob Herring <robh@kernel.org>
A recently implemented dtc compiler warning reports a dts problem
via a build warning:
drivers/of/unittest-data/tests-interrupts.dtsi:32.26-35.6: Warning (interrupt_map): /testcase-data/interrupts/intmap1: Missing '#address-cells' in interrupt-map provider
The warning will be addressed by a separate patch by suppressing the
warning for .dts files that include this .dtsi. This patch documents
why the warning is due to a deliberately incorrect .dtsi file so that
no one will fix the .dtsi file to prevent the build warning.
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Link: https://lore.kernel.org/r/20211030011039.2106946-1-frowand.list@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
The console message text for gpio hog errors does not match
what unittest expects.
Fixes: f4056e705b ("of: unittest: add overlay gpio test to catch gpio hog problem")
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Link: https://lore.kernel.org/r/20211029013225.2048695-1-frowand.list@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
The unittest dtbs have various intentional errors which cause warnings.
With the latest dtc sync to v1.6.1-19-g0a3a9d3449c8, we need to disable
some new checks: node_name_vs_property_name and interrupt_map warnings.
These warnings are also generated for static_base_1.dtb, so add
DTC_FLAGS for it.
Note that the interrupt_map warnings only appear once interrupt_provider
warning is re-enabled globally.
drivers/of/unittest-data/tests-interrupts.dtsi:32.26-35.6: Warning (interrupt_map): /testcase-data/interrupts/intmap1: Missing '#address-cells' in interrupt-map provider
Fixes: c12632bfb611 ("scripts/dtc: Update to upstream version v1.6.1-19-g0a3a9d3449c8")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Frank Rowand <frowand.list@gmail.com>
Tested-by: Frank Rowand <frowand.list@gmail.com>
Link: https://lore.kernel.org/r/20211028130423.4025578-1-robh@kernel.org/
Signed-off-by: Rob Herring <robh@kernel.org>
Deprecate AF_XDP support in libbpf ([0]). This has been moved to
libxdp as it is a better fit for that library. The AF_XDP support only
uses the public libbpf functions and can therefore just use libbpf as
a library from libxdp. The libxdp APIs are exactly the same so it
should just be linking with libxdp instead of libbpf for the AF_XDP
functionality. If not, please submit a bug report. Linking with both
libraries is supported but make sure you link in the correct order so
that the new functions in libxdp are used instead of the deprecated
ones in libbpf.
Libxdp can be found at https://github.com/xdp-project/xdp-tools.
[0] Closes: https://github.com/libbpf/libbpf/issues/270
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20211029090111.4733-1-magnus.karlsson@gmail.com
Using new PAHOLE_FLAGS variable to pass extra arguments to
pahole for both vmlinux and modules BTF data generation.
Adding new scripts/pahole-flags.sh script that detect and
prints pahole options.
[ fixed issues found by kernel test robot ]
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211029125729.70002-1-jolsa@kernel.org
./test_progs-no_alu32 -vv -t twfw
Before the 64-bit_into_32-bit fix:
19: (25) if r1 > 0x3f goto pc+6
R1_w=inv(id=0,umax_value=63,var_off=(0x0; 0xff),s32_max_value=255,u32_max_value=255)
and eventually:
invalid access to map value, value_size=8 off=7 size=8
R6 max value is outside of the allowed memory range
libbpf: failed to load object 'no_alu32/twfw.o'
After the fix:
19: (25) if r1 > 0x3f goto pc+6
R1_w=inv(id=0,umax_value=63,var_off=(0x0; 0x3f))
verif_twfw:OK
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211101222153.78759-3-alexei.starovoitov@gmail.com
Similar to unsigned bounds propagation fix signed bounds.
The 'Fixes' tag is a hint. There is no security bug here.
The verifier was too conservative.
Fixes: 3f50f132d8 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211101222153.78759-2-alexei.starovoitov@gmail.com
Before this fix:
166: (b5) if r2 <= 0x1 goto pc+22
from 166 to 189: R2=invP(id=1,umax_value=1,var_off=(0x0; 0xffffffff))
After this fix:
166: (b5) if r2 <= 0x1 goto pc+22
from 166 to 189: R2=invP(id=1,umax_value=1,var_off=(0x0; 0x1))
While processing BPF_JLE the reg_set_min_max() would set true_reg->umax_value = 1
and call __reg_combine_64_into_32(true_reg).
Without the fix it would not pass the condition:
if (__reg64_bound_u32(reg->umin_value) && __reg64_bound_u32(reg->umax_value))
since umin_value == 0 at this point.
Before commit 10bf4e8316 the umin was incorrectly ingored.
The commit 10bf4e8316 fixed the correctness issue, but pessimized
propagation of 64-bit min max into 32-bit min max and corresponding var_off.
Fixes: 10bf4e8316 ("bpf: Fix propagation of 32 bit unsigned bounds from 64 bit bounds")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211101222153.78759-1-alexei.starovoitov@gmail.com
There's compilation fail reported kernel test robot for W=1 build:
>> samples/ftrace/ftrace-direct-multi.c:8:6: warning: no previous
prototype for function 'my_direct_func' [-Wmissing-prototypes]
void my_direct_func(unsigned long ip)
The inlined assembly is used outside function, so we can't make
my_direct_func static and pass it as asm input argument.
However my_tramp is already extern so I think there's no problem
keeping my_direct_func extern as well and just add its prototype.
Link: https://lkml.kernel.org/r/20211101153907.377668-1-jolsa@kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 5fae941b9a ("ftrace/samples: Add multi direct interface test module")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If the divisor is a constant and zero, the undeifned case can be
detected and an error returned instead of -1.
Link: https://lkml.kernel.org/r/20211029183339.3216491-3-kaleshsingh@google.com
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
If the divisor is a constant use specific division functions to
avoid extra branches when the trigger is hit.
If the divisor constant but not a power of 2, the division can be
replaced with a multiplication and shift in the following case:
Let X = dividend and Y = divisor.
Choose Z = some power of 2. If Y <= Z, then:
X / Y = (X * (Z / Y)) / Z
(Z / Y) is a constant (mult) which is calculated at parse time, so:
X / Y = (X * mult) / Z
The division by Z can be replaced by a shift since Z is a power of 2:
X / Y = (X * mult) >> shift
As long, as X < Z the results will not be off by more than 1.
Link: https://lkml.kernel.org/r/20211029232410.3494196-1-kaleshsingh@google.com
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Multiple corrections to smackfs.
W=1 fixes
Fix for overlayfs.
-----BEGIN PGP SIGNATURE-----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=lPZg
-----END PGP SIGNATURE-----
Merge tag 'Smack-for-5.16' of https://github.com/cschaufler/smack-next
Pull smack updates from Casey Schaufler:
"Multiple corrections to smackfs:
- a change for overlayfs support that corrects the initial attributes
on created files
- code clean-up for netlabel processing
- several fixes in smackfs for a variety of reasons
- Errors reported by W=1 have been addressed
All told, nothing challenging"
* tag 'Smack-for-5.16' of https://github.com/cschaufler/smack-next:
smackfs: use netlbl_cfg_cipsov4_del() for deleting cipso_v4_doi
smackfs: use __GFP_NOFAIL for smk_cipso_doi()
Smack: fix W=1 build warnings
smack: remove duplicated hook function
Smack:- Use overlay inode label in smack_inode_copy_up()
smack: Guard smack_ipv6_lock definition within a SMACK_IPV6_PORT_LABELING block
smackfs: Fix use-after-free in netlbl_catmap_walk()
Tim Crawford