Commit Graph

300 Commits

Author SHA1 Message Date
Miklos Szeredi 59c3b76cc6 fuse: fix fuse_write_end() if zero bytes were copied
If pos is at the beginning of a page and copied is zero then page is not
zeroed but is marked uptodate.

Fix by skipping everything except unlock/put of page if zero bytes were
copied.

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: 6b12c1b37e ("fuse: Implement write_begin/write_end callbacks")
Cc: <stable@vger.kernel.org> # v3.15+
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-11-15 12:34:21 +01:00
Linus Torvalds abb5a14fa2 Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
 "Assorted misc bits and pieces.

  There are several single-topic branches left after this (rename2
  series from Miklos, current_time series from Deepa Dinamani, xattr
  series from Andreas, uaccess stuff from from me) and I'd prefer to
  send those separately"

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (39 commits)
  proc: switch auxv to use of __mem_open()
  hpfs: support FIEMAP
  cifs: get rid of unused arguments of CIFSSMBWrite()
  posix_acl: uapi header split
  posix_acl: xattr representation cleanups
  fs/aio.c: eliminate redundant loads in put_aio_ring_file
  fs/internal.h: add const to ns_dentry_operations declaration
  compat: remove compat_printk()
  fs/buffer.c: make __getblk_slow() static
  proc: unsigned file descriptors
  fs/file: more unsigned file descriptors
  fs: compat: remove redundant check of nr_segs
  cachefiles: Fix attempt to read i_blocks after deleting file [ver #2]
  cifs: don't use memcpy() to copy struct iov_iter
  get rid of separate multipage fault-in primitives
  fs: Avoid premature clearing of capabilities
  fs: Give dentry to inode_change_ok() instead of inode
  fuse: Propagate dentry down to inode_change_ok()
  ceph: Propagate dentry down to inode_change_ok()
  xfs: Propagate dentry down to inode_change_ok()
  ...
2016-10-10 13:04:49 -07:00
Al Viro e55f1d1d13 Merge remote-tracking branch 'jk/vfs' into work.misc 2016-10-08 11:06:08 -04:00
Miklos Szeredi acbe5fda1f fuse: don't use fuse_ioctl_copy_user() helper
The two invocations share little code.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-10-01 07:32:33 +02:00
Al Viro 3daa9c5165 fuse_ioctl_copy_user(): don't open-code copy_page_{to,from}_iter()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-10-01 07:32:33 +02:00
Jan Kara 6249033076 fuse: Propagate dentry down to inode_change_ok()
To avoid clearing of capabilities or security related extended
attributes too early, inode_change_ok() will need to take dentry instead
of inode. Propagate it down to fuse_do_setattr().

Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2016-09-22 10:56:19 +02:00
Miklos Szeredi 8fba54aebb fuse: direct-io: don't dirty ITER_BVEC pages
When reading from a loop device backed by a fuse file it deadlocks on
lock_page().

This is because the page is already locked by the read() operation done on
the loop device.  In this case we don't want to either lock the page or
dirty it.

So do what fs/direct-io.c does: only dirty the page for ITER_IOVEC vectors.

Reported-by: Sheng Yang <sheng@yasker.org>
Fixes: aa4d86163e ("block: loop: switch to VFS ITER_BVEC")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org> # v4.1+
Reviewed-by: Sheng Yang <sheng@yasker.org>
Reviewed-by: Ashish Samant <ashish.samant@oracle.com>
Tested-by: Sheng Yang <sheng@yasker.org>
Tested-by: Ashish Samant <ashish.samant@oracle.com>
2016-08-24 18:17:04 +02:00
Linus Torvalds 27ae0c41ed Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
 "This fixes error propagation from writeback to fsync/close for
  writeback cache mode as well as adding a missing capability flag to
  the INIT message.  The rest are cleanups.

  (The commits are recent but all the code actually sat in -next for a
  while now.  The recommits are due to conflict avoidance and the
  addition of Cc: stable@...)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: use filemap_check_errors()
  mm: export filemap_check_errors() to modules
  fuse: fix wrong assignment of ->flags in fuse_send_init()
  fuse: fuse_flush must check mapping->flags for errors
  fuse: fsync() did not return IO errors
  fuse: don't mess with blocking signals
  new helper: wait_event_killable_exclusive()
  fuse: improve aio directIO write performance for size extending writes
2016-07-29 12:29:15 -07:00
Miklos Szeredi 4a7f4e88fe fuse: use filemap_check_errors()
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-07-29 14:10:57 +02:00
Maxim Patlasov 9ebce595f6 fuse: fuse_flush must check mapping->flags for errors
fuse_flush() calls write_inode_now() that triggers writeback, but actual
writeback will happen later, on fuse_sync_writes(). If an error happens,
fuse_writepage_end() will set error bit in mapping->flags. So, we have to
check mapping->flags after fuse_sync_writes().

Signed-off-by: Maxim Patlasov <mpatlasov@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 4d99ff8f12 ("fuse: Turn writeback cache on")
Cc: <stable@vger.kernel.org> # v3.15+
2016-07-29 14:10:57 +02:00
Alexey Kuznetsov ac7f052b9e fuse: fsync() did not return IO errors
Due to implementation of fuse writeback filemap_write_and_wait_range() does
not catch errors. We have to do this directly after fuse_sync_writes()

Signed-off-by: Alexey Kuznetsov <kuznet@virtuozzo.com>
Signed-off-by: Maxim Patlasov <mpatlasov@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 4d99ff8f12 ("fuse: Turn writeback cache on")
Cc: <stable@vger.kernel.org> # v3.15+
2016-07-29 14:10:57 +02:00
Mel Gorman 11fb998986 mm: move most file-based accounting to the node
There are now a number of accounting oddities such as mapped file pages
being accounted for on the node while the total number of file pages are
accounted on the zone.  This can be coped with to some extent but it's
confusing so this patch moves the relevant file-based accounted.  Due to
throttling logic in the page allocator for reliable OOM detection, it is
still necessary to track dirty and writeback pages on a per-zone basis.

[mgorman@techsingularity.net: fix NR_ZONE_WRITE_PENDING accounting]
  Link: http://lkml.kernel.org/r/1468404004-5085-5-git-send-email-mgorman@techsingularity.net
Link: http://lkml.kernel.org/r/1467970510-21195-20-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-28 16:07:41 -07:00
Ashish Sangwan 7879c4e58b fuse: improve aio directIO write performance for size extending writes
While sending the blocking directIO in fuse, the write request is broken
into sub-requests, each of default size 128k and all the requests are sent
in non-blocking background mode if async_dio mode is supported by libfuse.
The process which issue the write wait for the completion of all the
sub-requests. Sending multiple requests parallely gives a chance to perform
parallel writes in the user space fuse implementation if it is
multi-threaded and hence improves the performance.

When there is a size extending aio dio write, we switch to blocking mode so
that we can properly update the size of the file after completion of the
writes. However, in this situation all the sub-requests are sent in
serialized manner where the next request is sent only after receiving the
reply of the current request. Hence the multi-threaded user space
implementation is not utilized properly.

This patch changes the size extending aio dio behavior to exactly follow
blocking dio. For multi threaded fuse implementation having 10 threads and
using buffer size of 64MB to perform async directIO, we are getting double
the speed.

Signed-off-by: Ashish Sangwan <ashishsangwan2@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-06-30 13:14:10 +02:00
Linus Torvalds c2e7b20705 Merge branch 'work.preadv2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs cleanups from Al Viro:
 "More cleanups from Christoph"

* 'work.preadv2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  nfsd: use RWF_SYNC
  fs: add RWF_DSYNC aand RWF_SYNC
  ceph: use generic_write_sync
  fs: simplify the generic_write_sync prototype
  fs: add IOCB_SYNC and IOCB_DSYNC
  direct-io: remove the offset argument to dio_complete
  direct-io: eliminate the offset argument to ->direct_IO
  xfs: eliminate the pos variable in xfs_file_dio_aio_write
  filemap: remove the pos argument to generic_file_direct_write
  filemap: remove pos variables in generic_file_read_iter
2016-05-17 15:05:23 -07:00
Christoph Hellwig c8b8e32d70 direct-io: eliminate the offset argument to ->direct_IO
Including blkdev_direct_IO and dax_do_io.  It has to be ki_pos to actually
work, so eliminate the superflous argument.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-01 19:58:39 -04:00
Christoph Hellwig 1af5bb491f filemap: remove the pos argument to generic_file_direct_write
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-01 19:58:39 -04:00
Ashish Samant 2c932d4c91 fuse: Fix return value from fuse_get_user_pages()
fuse_get_user_pages() should return error or 0. Otherwise fuse_direct_io
read will not return 0 to indicate that read has completed.

Fixes: 742f992708 ("fuse: return patrial success from fuse_direct_io()")
Signed-off-by: Ashish Samant <ashish.samant@oracle.com>
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-04-25 13:01:04 +02:00
Kirill A. Shutemov 09cbfeaf1a mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.

This promise never materialized.  And unlikely will.

We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE.  And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.

Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.

Let's stop pretending that pages in page cache are special.  They are
not.

The changes are pretty straight-forward:

 - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};

 - page_cache_get() -> get_page();

 - page_cache_release() -> put_page();

This patch contains automated changes generated with coccinelle using
script below.  For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.

The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.

There are few places in the code where coccinelle didn't reach.  I'll
fix them manually in a separate patch.  Comments and documentation also
will be addressed with the separate patch.

virtual patch

@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT

@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE

@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK

@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)

@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)

@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-04 10:41:08 -07:00
Ashish Samant 742f992708 fuse: return patrial success from fuse_direct_io()
If a user calls writev/readv in direct io mode with partially valid data
in the iovec array such that any vector other than the first one in the
array contains invalid data, we currently return the error for the invalid
iovec.

Instead, we should return the number of bytes already written/read and not
the error as we do in the non direct_io case.

Reported-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: Ashish Samant <ashish.samant@oracle.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-03-16 14:38:31 +01:00
Seth Forshee 744742d692 fuse: Add reference counting for fuse_io_priv
The 'reqs' member of fuse_io_priv serves two purposes. First is to track
the number of oustanding async requests to the server and to signal that
the io request is completed. The second is to be a reference count on the
structure to know when it can be freed.

For sync io requests these purposes can be at odds.  fuse_direct_IO() wants
to block until the request is done, and since the signal is sent when
'reqs' reaches 0 it cannot keep a reference to the object. Yet it needs to
use the object after the userspace server has completed processing
requests. This leads to some handshaking and special casing that it
needlessly complicated and responsible for at least one race condition.

It's much cleaner and safer to maintain a separate reference count for the
object lifecycle and to let 'reqs' just be a count of outstanding requests
to the userspace server. Then we can know for sure when it is safe to free
the object without any handshaking or special cases.

The catch here is that most of the time these objects are stack allocated
and should not be freed. Initializing these objects with a single reference
that is never released prevents accidental attempts to free the objects.

Fixes: 9d5722b777 ("fuse: handle synchronous iocbs internally")
Cc: stable@vger.kernel.org # v4.1+
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-03-14 15:02:51 +01:00
Robert Doebbelin 7cabc61e01 fuse: do not use iocb after it may have been freed
There's a race in fuse_direct_IO(), whereby is_sync_kiocb() is called on an
iocb that could have been freed if async io has already completed.  The fix
in this case is simple and obvious: cache the result before starting io.

It was discovered by KASan:

kernel: ==================================================================
kernel: BUG: KASan: use after free in fuse_direct_IO+0xb1a/0xcc0 at addr ffff88036c414390

Signed-off-by: Robert Doebbelin <robert@quobyte.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: bcba24ccdc ("fuse: enable asynchronous processing direct IO")
Cc: <stable@vger.kernel.org> # 3.10+
2016-03-14 15:02:50 +01:00
Al Viro 5955102c99 wrappers for ->i_mutex access
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).

Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-22 18:04:28 -05:00
Linus Torvalds 5c89e9ea7e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
 "This adds SEEK_HOLE and SEEK_DATA support in lseek"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: add support for SEEK_HOLE and SEEK_DATA in lseek
2016-01-21 12:14:24 -08:00
Linus Torvalds 732c4a9e14 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
 "Two bugfixes, both bound for -stable"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: break infinite loop in fuse_fill_write_pages()
  cuse: fix memory leak
2015-12-11 10:56:41 -08:00
Ravishankar N 0b5da8db14 fuse: add support for SEEK_HOLE and SEEK_DATA in lseek
A useful performance improvement for accessing virtual machine images
via FUSE mount.

See https://bugzilla.redhat.com/show_bug.cgi?id=1220173 for a use-case
for glusterFS.

Signed-off-by: Ravishankar N <ravishankar@redhat.com>
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
2015-11-10 10:32:37 +01:00
Roman Gushchin 3ca8138f01 fuse: break infinite loop in fuse_fill_write_pages()
I got a report about unkillable task eating CPU. Further
investigation shows, that the problem is in the fuse_fill_write_pages()
function. If iov's first segment has zero length, we get an infinite
loop, because we never reach iov_iter_advance() call.

Fix this by calling iov_iter_advance() before repeating an attempt to
copy data from userspace.

A similar problem is described in 124d3b7041 ("fix writev regression:
pan hanging unkillable and un-straceable"). If zero-length segmend
is followed by segment with invalid address,
iov_iter_fault_in_readable() checks only first segment (zero-length),
iov_iter_copy_from_user_atomic() skips it, fails at second and
returns zero -> goto again without skipping zero-length segment.

Patch calls iov_iter_advance() before goto again: we'll skip zero-length
segment at second iteraction and iov_iter_fault_in_readable() will detect
invalid address.

Special thanks to Konstantin Khlebnikov, who helped a lot with the commit
description.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Maxim Patlasov <mpatlasov@parallels.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Roman Gushchin <klamm@yandex-team.ru>
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Fixes: ea9b9907b8 ("fuse: implement perform_write")
Cc: <stable@vger.kernel.org>
2015-11-10 10:32:37 +01:00
Benjamin Coddington 4f6563677a Move locks API users to locks_lock_inode_wait()
Instead of having users check for FL_POSIX or FL_FLOCK to call the correct
locks API function, use the check within locks_lock_inode_wait().  This
allows for some later cleanup.

Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
2015-10-22 14:57:36 -04:00
Linus Torvalds 1dc51b8288 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull more vfs updates from Al Viro:
 "Assorted VFS fixes and related cleanups (IMO the most interesting in
  that part are f_path-related things and Eric's descriptor-related
  stuff).  UFS regression fixes (it got broken last cycle).  9P fixes.
  fs-cache series, DAX patches, Jan's file_remove_suid() work"

[ I'd say this is much more than "fixes and related cleanups".  The
  file_table locking rule change by Eric Dumazet is a rather big and
  fundamental update even if the patch isn't huge.   - Linus ]

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (49 commits)
  9p: cope with bogus responses from server in p9_client_{read,write}
  p9_client_write(): avoid double p9_free_req()
  9p: forgetting to cancel request on interrupted zero-copy RPC
  dax: bdev_direct_access() may sleep
  block: Add support for DAX reads/writes to block devices
  dax: Use copy_from_iter_nocache
  dax: Add block size note to documentation
  fs/file.c: __fget() and dup2() atomicity rules
  fs/file.c: don't acquire files->file_lock in fd_install()
  fs:super:get_anon_bdev: fix race condition could cause dev exceed its upper limitation
  vfs: avoid creation of inode number 0 in get_next_ino
  namei: make set_root_rcu() return void
  make simple_positive() public
  ufs: use dir_pages instead of ufs_dir_pages()
  pagemap.h: move dir_pages() over there
  remove the pointless include of lglock.h
  fs: cleanup slight list_entry abuse
  xfs: Correctly lock inode when removing suid and file capabilities
  fs: Call security_ops->inode_killpriv on truncate
  fs: Provide function telling whether file_remove_privs() will do anything
  ...
2015-07-04 19:36:06 -07:00
Linus Torvalds a7ba4bf5e7 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
 "This is the start of improving fuse scalability.

  An input queue and a processing queue is split out from the monolithic
  fuse connection, each of those having their own spinlock.  The end of
  the patchset adds the ability to clone a fuse connection.  This means,
  that instead of having to read/write requests/answers on a single fuse
  device fd, the fuse daemon can have multiple distinct file descriptors
  open.  Each of those can be used to receive requests and send answers,
  currently the only constraint is that a request must be answered on
  the same fd as it was read from.

  This can be extended further to allow binding a device clone to a
  specific CPU or NUMA node.

  Based on a patchset by Srinivas Eeda and Ashish Samant.  Thanks to
  Ashish for the review of this series"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (40 commits)
  fuse: update MAINTAINERS entry
  fuse: separate pqueue for clones
  fuse: introduce per-instance fuse_dev structure
  fuse: device fd clone
  fuse: abort: no fc->lock needed for request ending
  fuse: no fc->lock for pqueue parts
  fuse: no fc->lock in request_end()
  fuse: cleanup request_end()
  fuse: request_end(): do once
  fuse: add req flag for private list
  fuse: pqueue locking
  fuse: abort: group pqueue accesses
  fuse: cleanup fuse_dev_do_read()
  fuse: move list_del_init() from request_end() into callers
  fuse: duplicate ->connected in pqueue
  fuse: separate out processing queue
  fuse: simplify request_wait()
  fuse: no fc->lock for iqueue parts
  fuse: allow interrupt queuing without fc->lock
  fuse: iqueue locking
  ...
2015-07-02 11:21:26 -07:00
Miklos Szeredi 33e14b4dfd fuse: req state use flags
Use flags for representing the state in fuse_req.  This is needed since
req->list will be protected by different locks in different states, hence
we'll want the state itself to be split into distinct bits, each protected
with the relevant lock in that state.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2015-07-01 16:26:01 +02:00
Miklos Szeredi 7a3b2c7547 fuse: simplify req states
FUSE_REQ_INIT is actually the same state as FUSE_REQ_PENDING and
FUSE_REQ_READING and FUSE_REQ_WRITING can be merged into a common
FUSE_REQ_IO state.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reviewed-by: Ashish Samant <ashish.samant@oracle.com>
2015-07-01 16:26:00 +02:00
Miklos Szeredi 825d6d3395 fuse: req use bitops
Finer grained locking will mean there's no single lock to protect
modification of bitfileds in fuse_req.

So move to using bitops.  Can use the non-atomic variants for those which
happen while the request definitely has only one reference.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reviewed-by: Ashish Samant <ashish.samant@oracle.com>
2015-07-01 16:25:58 +02:00
Jan Kara 5fa8e0a1c6 fs: Rename file_remove_suid() to file_remove_privs()
file_remove_suid() is a misnomer since it removes also file capabilities
stored in xattrs and sets S_NOSEC flag. Also should_remove_suid() tells
something else than whether file_remove_suid() call is necessary which
leads to bugs.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-06-23 18:01:08 -04:00
Tejun Heo 93f78d8828 writeback: move backing_dev_info->bdi_stat[] into bdi_writeback
Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback)
and the role of the separation is unclear.  For cgroup support for
writeback IOs, a bdi will be updated to host multiple wb's where each
wb serves writeback IOs of a different cgroup on the bdi.  To achieve
that, a wb should carry all states necessary for servicing writeback
IOs for a cgroup independently.

This patch moves bdi->bdi_stat[] into wb.

* enum bdi_stat_item is renamed to wb_stat_item and the prefix of all
  enums is changed from BDI_ to WB_.

* BDI_STAT_BATCH() -> WB_STAT_BATCH()

* [__]{add|inc|dec|sum}_wb_stat(bdi, ...) -> [__]{add|inc}_wb_stat(wb, ...)

* bdi_stat[_error]() -> wb_stat[_error]()

* bdi_writeout_inc() -> wb_writeout_inc()

* stat init is moved to bdi_wb_init() and bdi_wb_exit() is added and
  frees stat.

* As there's still only one bdi_writeback per backing_dev_info, all
  uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[]
  introducing no behavior changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-02 08:33:34 -06:00
Al Viro 2ba48ce513 mirror O_APPEND and O_DIRECT into iocb->ki_flags
... avoiding write_iter/fcntl races.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11 22:30:22 -04:00
Al Viro 3309dd04cb switch generic_write_checks() to iocb and iter
... returning -E... upon error and amount of data left in iter after
(possible) truncation upon success.  Note, that normal case gives
a non-zero (positive) return value, so any tests for != 0 _must_ be
updated.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Conflicts:
	fs/ext4/file.c
2015-04-11 22:30:21 -04:00
Al Viro 6b775b18ee fuse: ->direct_IO() doesn't need generic_write_checks()
already done by caller.  We used to call __fuse_direct_write(), which
called generic_write_checks(); now the former got expanded, bringing
the latter to the surface.  It used to be called all along and calling
it from there had been wrong all along...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11 22:29:50 -04:00
Al Viro 0fa6b005af generic_write_checks(): drop isblk argument
all remaining callers are passing 0; some just obscure that fact.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11 22:29:48 -04:00
Omar Sandoval 22c6186ece direct_IO: remove rw from a_ops->direct_IO()
Now that no one is using rw, remove it completely.

Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11 22:29:45 -04:00
Omar Sandoval 6f67376318 direct_IO: use iov_iter_rw() instead of rw everywhere
The rw parameter to direct_IO is redundant with iov_iter->type, and
treated slightly differently just about everywhere it's used: some users
do rw & WRITE, and others do rw == WRITE where they should be doing a
bitwise check. Simplify this with the new iov_iter_rw() helper, which
always returns either READ or WRITE.

Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11 22:29:45 -04:00
Al Viro 5d5d568975 make new_sync_{read,write}() static
All places outside of core VFS that checked ->read and ->write for being NULL or
called the methods directly are gone now, so NULL {read,write} with non-NULL
{read,write}_iter will do the right thing in all cases.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11 22:29:40 -04:00
Al Viro 812408fb51 expand __fuse_direct_write() in both callers
it's actually shorter that way *and* later we'll want iocb in scope
of generic_write_check() caller.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11 22:27:53 -04:00
Al Viro 1531626364 fuse: switch fuse_direct_io_file_operations to ->{read,write}_iter()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-11 22:27:53 -04:00
Christoph Hellwig e2e40f2c1e fs: move struct kiocb to fs.h
struct kiocb now is a generic I/O container, so move it to fs.h.
Also do a #include diet for aio.h while we're at it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-25 20:28:11 -04:00
Christoph Hellwig 04b2fa9f8f fs: split generic and aio kiocb
Most callers in the kernel want to perform synchronous file I/O, but
still have to bloat the stack with a full struct kiocb.  Split out
the parts needed in filesystem code from those in the aio code, and
only allocate those needed to pass down argument on the stack.  The
aio code embedds the generic iocb in the one it allocates and can
easily get back to it by using container_of.

Also add a ->ki_complete method to struct kiocb, this is used to call
into the aio code and thus removes the dependency on aio for filesystems
impementing asynchronous operations.  It will also allow other callers
to substitute their own completion callback.

We also add a new ->ki_flags field to work around the nasty layering
violation recently introduced in commit 5e33f6 ("usb: gadget: ffs: add
eventfd notification about ffs events").

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-13 12:10:27 -04:00
Christoph Hellwig 9d5722b777 fuse: handle synchronous iocbs internally
Based on a patch from Maxim Patlasov <MPatlasov@parallels.com>.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-13 12:10:15 -04:00
Linus Torvalds 6bec003528 Merge branch 'for-3.20/bdi' of git://git.kernel.dk/linux-block
Pull backing device changes from Jens Axboe:
 "This contains a cleanup of how the backing device is handled, in
  preparation for a rework of the life time rules.  In this part, the
  most important change is to split the unrelated nommu mmap flags from
  it, but also removing a backing_dev_info pointer from the
  address_space (and inode), and a cleanup of other various minor bits.

  Christoph did all the work here, I just fixed an oops with pages that
  have a swap backing.  Arnd fixed a missing export, and Oleg killed the
  lustre backing_dev_info from staging.  Last patch was from Al,
  unexporting parts that are now no longer needed outside"

* 'for-3.20/bdi' of git://git.kernel.dk/linux-block:
  Make super_blocks and sb_lock static
  mtd: export new mtd_mmap_capabilities
  fs: make inode_to_bdi() handle NULL inode
  staging/lustre/llite: get rid of backing_dev_info
  fs: remove default_backing_dev_info
  fs: don't reassign dirty inodes to default_backing_dev_info
  nfs: don't call bdi_unregister
  ceph: remove call to bdi_unregister
  fs: remove mapping->backing_dev_info
  fs: export inode_to_bdi and use it in favor of mapping->backing_dev_info
  nilfs2: set up s_bdi like the generic mount_bdev code
  block_dev: get bdev inode bdi directly from the block device
  block_dev: only write bdev inode on close
  fs: introduce f_op->mmap_capabilities for nommu mmap support
  fs: kill BDI_CAP_SWAP_BACKED
  fs: deduplicate noop_backing_dev_info
2015-02-12 13:50:21 -08:00
Kirill A. Shutemov d83a08db5b mm: drop vm_ops->remap_pages and generic_file_remap_pages() stub
Nobody uses it anymore.

[akpm@linux-foundation.org: fix filemap_xip.c]
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-10 14:30:30 -08:00
Christoph Hellwig de1414a654 fs: export inode_to_bdi and use it in favor of mapping->backing_dev_info
Now that we got rid of the bdi abuse on character devices we can always use
sb->s_bdi to get at the backing_dev_info for a file, except for the block
device special case.  Export inode_to_bdi and replace uses of
mapping->backing_dev_info with it to prepare for the removal of
mapping->backing_dev_info.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-01-20 14:03:04 -07:00
Linus Torvalds c103b21c20 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse update from Miklos Szeredi:
 "The first part makes sure we don't hold up umount with pending async
  requests.  In addition to being a cleanup, this is a small behavioral
  change (for the better) and unlikely to break anything.

  The second part prepares for a cleanup of the fuse device I/O code by
  adding a helper for simple request submission, with some savings in
  line numbers already realized"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: use file_inode() in fuse_file_fallocate()
  fuse: introduce fuse_simple_request() helper
  fuse: reduce max out args
  fuse: hold inode instead of path after release
  fuse: flush requests on umount
  fuse: don't wake up reserved req in fuse_conn_kill()
2014-12-17 09:41:32 -08:00