When using event group viewer, it's better to show the group description
rather than the leader information alone.
If a leader did not contain any member, it's a non-group event.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1358845787-1350-17-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ->counts field was never freed in the current code. Add
perf_evsel__free_counts() function to free it properly.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1359078284-32080-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This field will be used by commands which print counter deltas on
regular timer intervals, such as perf stat -I.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1359460064-3060-2-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That consolidates the error messages in 'record', 'stat' and 'top', that
now get a consistent set of messages and allow other tools to use the
new method to report problems using whatever UI toolkit.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-1cudb7wl996kz7ilz83ctvhr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The only fallback right now is for HW cpu-cycles -> SW cpu-clock, that
was done in the same way in both 'top' and 'record'.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-58l1mgibh9oa9m0pd3fasxa5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of doing it in stat, top, record or any other tool that opens
event descriptors.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vr8hzph83d5t2mdlkf565h84@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can print all the details when debugging other tools,
when we have just evlists and evsels, not a perf.data file.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-mktq5fy2h5z7jyeqvvf5mbc8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is needed, so far, just in 'perf stat', to scale counters, so don't
unconditionally ask for them in the perf_evsel__config() method.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ujpujgscq2f2oodxuso5nobc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead make perf_evlist__confir_attrs use perf_evsel__set_sample_id()
when having more than one event, that way only if we have multiple
events we'll ask to have the event ids returned when we read its file
descriptors.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-xuho5hrrxy2ky0cjpr80hyfp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When mmaping multiple events we need to find the right evsel that
matches an event in the ring buffer.
For that we need to set the PERF_FORMAT_ID bit in
perf_event_attr.read_format so that when we read the event fds we get
that id to then hash it and be able later to use perf_evlist__id2evsel
to find the right evsel.
We also need to set the PERF_SAMPLE_ID bit in
perf_event_attr.sample_type to ask for that id to be stashed in each
sample, so that we can demux it.
So add a perf_evsel__set_sample_id() method to do those two things in
one operation.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-1z4xcmbud30lamklfe80oopu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We use evsel->sample_size to detect underflows in
perf_evsel__parse_sample, but we were failing to update it after
perf_evsel__init(), i.e. when we decide, after creating an evsel, that
we want some extra field bit set.
Fix it by introducing methods to set a bit that will take care of
correctly adjusting evsel->sample_size.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-2ny5pzsing0dcth7hws48x9c@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Convert perf_evsel__is_group_member to perf_evsel__is_group_leader.
This is because the most usecases are using negative form to check
whether the given evsel is a leader or not and it's IMHO somewhat
ambiguous - leader also *is* a member of the group.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1354171126-14387-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently only non-leader members are set ->leader to the leader evsel
of the group and the leader has set NULL. Thus it requires special
casing for leader evsels. Set ->leader to itself will remove this.
Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1354171126-14387-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make perf build for x86 once the UAPI disintegration patches for that arch
have been applied by adding the appropriate -I flags - in the right order -
and then converting some #includes that use ../.. notation to find main kernel
headerfiles to use <asm/foo.h> and <linux/foo.h> instead.
Note that -Iarch/foo/include/uapi is present _before_ -Iarch/foo/include.
This makes sure we get the userspace version of the pt_regs struct. Ideally,
we wouldn't have the latter -I flag at all, but unfortunately we want
asm/svm.h and asm/vmx.h in builtin-kvm.c and these aren't part of the UAPI -
at least not for x86. I wonder if the bits outside of the __KERNEL__ guards
*should* be transferred there.
I note also that perf seems to do its dependency handling manually by listing
all the header files it might want to use in LIB_H in the Makefile. Can this
be changed to use -MD?
Note that to do make this work, we need to export and UAPI disintegrate
linux/hw_breakpoint.h, which I think should've been exported previously so that
perf can access the bits. We have to do this in the same patch to maintain
bisectability.
Signed-off-by: David Howells <dhowells@redhat.com>
To clarify what is being tested, instead of assuming that evsel->leader
== NULL means either an 'isolated' evsel or a 'group leader'.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-lvdbvimaxw9nc5een5vmem0c@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the record command sets all events initially as disabled.
There's non conditional perf_evlist__enable call, that enables all
events before we exec tracee program. That actually screws whole
enable_on_exec logic, because the event is enabled before the traced
program got executed.
What we actually want is:
1) For any type of traced program:
- all independent events and group leaders are disabled
- all group members are enabled
Group members are ruled by group leaders. They need to
be enabled, because the group scheduling relies on that.
2) For traced programs executed by perf:
- all independent events and group leaders have
enable_on_exec set
- we don't specifically enable or disable any event during
the record command
Independent events and group leaders are initially disabled
and get enabled by exec. Group members are ruled by group
leaders as stated in 1).
3) For traced programs attached by perf (pid/tid):
- we specifically enable or disable all events during
the record command
When attaching events to already running traced we
enable/disable events specifically, as there's no
initial traced exec call.
Fixing appropriate perf_event_attr test case to cover this change.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1352741644-16809-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixing events attributes for groups defined via '{}'.
Currently 'enable_on_exec' attribute in record command and both
'disabled ' and 'enable_on_exec' attributes in stat command are set
based on the 'group' option. This eliminates proper setup for '{}'
defined groups as they don't set 'group' option.
Making above attributes values based on the 'evsel->leader' as this is
common to both group definition.
Moving perf_evlist__set_leader call within builtin-record ahead
perf_evlist__config_attrs call, because the latter needs possible group
leader links in place.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1352741644-16809-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The UAPI commits forgot to test tooling builds such as tools/perf/,
and this fixes the fallout.
Manual conversion.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It'll be needed in the next patches, where it'll be not associated
directly to an evsel.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-v9x3q9rv4caxtox7wtjpchq5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Will be used for things like the args field in the raw_syscalls:sys_enter
tracepoint.
Implement strval with it, its basicaly strval returning void *.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-v9x3q9rv4caxtox7wtjpchq5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Not event_format->name, that doesn't contains the sys: part.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-v9x3q9rv4caxtox7wtjpchq5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To apply a filter to all the evsels in an evlist.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-v9x3q9rv4caxtox7wtjpchq5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were relying on the info in pevent, but since we have it in
perf_evsel, set up by the perf_session routine if read from a perf.data
file or by whoever creates the evsels, use it.
New 'perf test' entries will use it to parse locally generated events,
in a non perf.data centered workflow.
As well as use byteswap.h to get per arch optimized swap routines, like
other parts of perf (header, perf_evsel__parse_sample, symbol, etc)
already do.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-8tjuxk09mlsfmh7macgkxsip@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of passing it around for parsing as an explicit parameter, will
help with reading tracepoint fields when not using a perf session or
pevent structure, i.e. for non perf.data centered workflows.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-qa67ikv2sm49cwa7dyjhhp6g@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It needs to properly set the sample_type, sample_period and the KVM
related perf_event_attr fields.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-v9x3q9rv4caxtox7wtjpchq5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The existing constructor receives a perf_event_attr filled with the
event type and the config.
To reduce the boilerplate for tracepoints, provide a new constructor,
perf_evsel__newtp() that receives the tracepoint name and will open
the debugfs file, call into libtraceevent new pevent_parse_format file
to fill its ->tp_format member, so that users can then just call
perf_evsel__field() to access its fields.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-6du8dl1hz0y5l4cybodye7hn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wrappers to the libtraceevent routines, so that we can further reduce
the surface contact perf builtins have with it.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-rtmgzptvrifzjxqwb9vs6g1b@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It basically traverses the hardware and software event name arrays
creating an evlist with all events, then it uses perf_evsel__name to
check that the name is the expected one.
With it I noticed this problem:
[root@sandy ~]# perf test 10
10: roundtrip evsel->name check:invalid or unsupported event: 'CPU-migrations'
Run 'perf list' for a list of valid events
FAILED!
Changed it to "cpu-migrations" in the software event arrays and it
worked.
This is to catch problems like the one reported by Joel Uckelman in
http://permalink.gmane.org/gmane.linux.kernel.perf.user/1016
Hardware cache events will be checked in the following patch.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-5jskfkuqvf2fi257zmni0ftz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If detection fails and an event name is unknown, report the type number.
Example perf header output:
# Samples: 10K of event 'unknown attr type: 7'
Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1345144224-27280-3-git-send-email-robert.richter@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just like was done for parse_events__set_leader.
Also we need to have the list_entry set_leader method in evlist.c so that we
don't grow another dep in the python binding:
# ~acme/git/linux/tools/perf/python/twatch.py
Traceback (most recent call last):
File "/home/acme/git/linux/tools/perf/python/twatch.py", line 16, in <module>
import perf
ImportError: /home/acme/git/build/perf/python/perf.so: undefined symbol: parse_events__set_leader
And also remove a pr_debug from evsel.c so that we avoid this one too:
# ~acme/git/linux/tools/perf/python/twatch.py
Traceback (most recent call last):
File "/home/acme/git/linux/tools/perf/python/twatch.py", line 16, in <module>
import perf
ImportError: /home/acme/git/build/perf/python/perf.so: undefined symbol: eprintf
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-0hk9dazg9pora9jylkqngovm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds a functionality that allows to create event groups
based on the way they are specified on the command line. Adding
functionality to the '{}' group syntax introduced in earlier patch.
The current '--group/-g' option behaviour remains intact. If you
specify it for record/stat/top command, all the specified events
become members of a single group with the first event as a group
leader.
With the new '{}' group syntax you can create group like:
# perf record -e '{cycles,faults}' ls
resulting in single event group containing 'cycles' and 'faults'
events, with cycles event as group leader.
All groups are created with regards to threads and cpus. Thus
recording an event group within a 2 threads on server with
4 CPUs will create 8 separate groups.
Examples (first event in brackets is group leader):
# 1 group (cpu-clock,task-clock)
perf record --group -e cpu-clock,task-clock ls
perf record -e '{cpu-clock,task-clock}' ls
# 2 groups (cpu-clock,task-clock) (minor-faults,major-faults)
perf record -e '{cpu-clock,task-clock},{minor-faults,major-faults}' ls
# 1 group (cpu-clock,task-clock,minor-faults,major-faults)
perf record --group -e cpu-clock,task-clock -e minor-faults,major-faults ls
perf record -e '{cpu-clock,task-clock,minor-faults,major-faults}' ls
# 2 groups (cpu-clock,task-clock) (minor-faults,major-faults)
perf record -e '{cpu-clock,task-clock} -e '{minor-faults,major-faults}' \
-e instructions ls
# 1 group
# (cpu-clock,task-clock,minor-faults,major-faults,instructions)
perf record --group -e cpu-clock,task-clock \
-e minor-faults,major-faults -e instructions ls perf record -e
'{cpu-clock,task-clock,minor-faults,major-faults,instructions}' ls
It's possible to use standard event modifier for a group, which spans
over all events in the group and updates each event modifier settings,
for example:
# perf record -r '{faults:k,cache-references}:p'
resulting in ':kp' modifier being used for 'faults' and ':p' modifier
being used for 'cache-references' event.
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/n/tip-ho42u0wcr8mn1otkalqi13qp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch enables perf to use the DWARF unwind code.
It extends the perf record '-g' option with following arguments:
'fp' - provides framepointer based user
stack backtrace
'dwarf[,size]' - provides DWARF (libunwind) based user stack
backtrace. The size specifies the size of the
user stack dump. If omitted it is 8192 by default.
If libunwind is found during the perf build, then the 'dwarf' argument
becomes available for record command. The 'fp' stays as default option
in any case.
Examples: (perf compiled with libunwind)
perf record -g dwarf ls
- provides dwarf unwind with 8192 as stack dump size
perf record -g dwarf,4096 ls
- provides dwarf unwind with 4096 as stack dump size
perf record -g -- ls
perf record -g fp ls
- provides frame pointer unwind
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Original-patch-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-13-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding following info to be parsed out of the event sample:
- user register set
- user stack dump
Both are global and specific to all events within the session.
This info will be used in the unwind patches coming in shortly.
Adding simple output printout (report -D) for both register and
stack dumps.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Original-patch-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-11-git-send-email-jolsa@redhat.com
[ Use evsel->attr.sample_regs_user ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we need evsel->{attr.{sample_{id_all,type}},sample_size},
reducing the number of parameters tools have to pass.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-wdtmgak0ihgsmw1brb54a8h4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we don't have to store it in the perf_session instance, because
in the future perf_session instances may have multiple evlists, each
with different sample_type/sizes.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ptod86fxkpgq3h62m9refkv4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding hw breakpoint events hook in the perf_evsel__name function, to
display event names properly all over the perf tools.
Updated hw breakpoints events tests.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jovi Zhang <bookjovi@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1340918329-3012-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The commit c410431cef ("perf tools: Reconstruct event with modifiers
from perf_event_attr") added the line, but it's broken since it needs to
go up 3 directories to get to the kernel root directory, not 2.
However host gcc contains /usr/local/include in its search path, so that
it can find the perf_event.h in /usr/include. This why we didn't notice
the problem yet. But when I tried to cross compile it appears like:
CC util/evsel.o
util/evsel.c:18:44: error: ../../include/linux/perf_event.h: No such file or directory
make: *** [util/evsel.o] Error 1
Looking at the source, it isn't needed at all as evsel.h already
included the perf_event.h. So simply remove it would solve the problem.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1340268772-5737-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that __event_name is gone, no need to export __perf_evsel__[hs]w_name().
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-rpjnarbt83nu9uowrfatmy12@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I forgot to add the modifiers to raw events too, fix it.
Reported-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-pi267j1aqqjti9rqh9qy4g58@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we don't use global variables that could make us misreport event
names when having a multi window top, for instance.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-mccancovi1u0wdkg8ncth509@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now to convert all event_name users to perf_evsel__name.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-buuz0j0gynseglxa76r01rdn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
From perf_evsel__hw_name, so that we can use it for the other kinds of
events (tracepoints, software, hw cache, etc).
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-9gmd5wewsrvtny8tzxjfp471@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We swap the sample_id_all header by u64 pointers. Some members of the
header happen to be 32 bit values. We need to handle them separatelly.
Together with other endianity patches, this change fixies perf report
discrepancies on origin and target systems as described in test 1 below,
e.g. following perf report diff:
...
0.12% ps [kernel.kallsyms] [k] clear_page
- 0.12% awk bash [.] alloc_word_desc
+ 0.12% awk bash [.] yyparse
0.11% beah-rhts-task libpython2.6.so.1.0 [.] 0x5560e
0.10% perf libc-2.12.so [.] __ctype_toupper_loc
- 0.09% rhts-test-runne bash [.] maybe_make_export_env
+ 0.09% rhts-test-runne bash [.] 0x385a0
0.09% ps [kernel.kallsyms] [k] page_fault
...
Note, running following to test perf endianity handling:
test 1)
- origin system:
# perf record -a -- sleep 10 (any perf record will do)
# perf report > report.origin
# perf archive perf.data
- copy the perf.data, report.origin and perf.data.tar.bz2
to a target system and run:
# tar xjvf perf.data.tar.bz2 -C ~/.debug
# perf report > report.target
# diff -u report.origin report.target
- the diff should produce no output
(besides some white space stuff and possibly different
date/TZ output)
test 2)
- origin system:
# perf record -ag -fo /tmp/perf.data -- sleep 1
- mount origin system root to the target system on /mnt/origin
- target system:
# perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \
--kallsyms /mnt/origin/proc/kallsyms
- complete perf.data header is displayed
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1338380624-7443-4-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The modifiers:
k kernel space
u user space
h hypervisor
G guest
H host
p, pp, ppp precision level (PEBS)
that can be suffixed to an event were lost when tools used event_name()
to reconstruct them from the perf_event_attr entries in a perf.data
file.
Fix it by following the defaults used for these modifiers in the current
codebase, so:
$ perf record -e instructions:u usleep 1 2> /dev/null
$ perf evlist
instructions:u
$ perf record -e cycles:k usleep 1 2> /dev/null
$ perf evlist
cycles:k
$ perf record -e cycles:kh usleep 1 2> /dev/null
$ perf evlist
cycles:kh
$ perf record -e cache-misses:G usleep 1 2> /dev/null
$ perf evlist
cache-misses:G
$ perf record -e cycles:ppk usleep 1 2> /dev/null
$ perf evlist
cycles:kpp
$
Also works with 'top', 'report', etc.
More work needed to cover tracepoints and software events while not
dragging lots of baggage to the python binding, this is a minimal fix
for v3.5.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-4hl5glle0hxlklw4usva1mkt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The following union:
union {
u64 val64;
u32 val32[2];
} u;
is used on more than one place in perf code and will be used more in
upcomming patches.
Adding union u64_swap to have it defined globaly so we dont need to
redefine it all the time.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337151548-2396-4-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add PERF_SAMPLE_CPU flag into attr->sample_type if an user specified any
of cpu target (either system-wide or cpu list).
It will show correct values when cpu sort key is given for perf top and
perf report.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337564527-9367-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
764e16a changed perf-record to create events disabled by default and
enable them once perf initializations are done. This setting was dropped
by 0f82ebc. Now perf events are once again generated during perf's
initialization phase (e.g., generating maps).
As an example, perf opens a lot of files at startup. Unpatched:
perf record -e syscalls:sys_enter_open -ga -fo /tmp/perf.data -- sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.087 MB /tmp/perf.data (~3798 samples) ]
Using perf-script to look at the samples shows the perf command generating
563 of the 566 total events.
Patched:
perf record -e syscalls:sys_enter_open -ga -fo /tmp/perf.data -- sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.028 MB /tmp/perf.data (~1206 samples) ]
Using perf-script to look at the samples does not show perf command.
Signed-off-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1336968088-11531-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename perf_target__no_{cpu,task} to perf_target__has_{cpu,task} because
it's more intuitive and easy to parse (for human beings) when used with
negation.
The names are came out from David Ahern. It is intended to be a
mechanical substitution without any functional change.
The perf_target__none remains unchanged since I couldn't find a right
name and it is hardly used with negation.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Suggested-by: David Ahern <dsahern@gmail.com>
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337161549-9870-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There are places that check whether target task/cpu is given or not and
some of them didn't check newly introduced uid or cpu list. Add and use
three of helper functions to treat them properly.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1336367344-28071-7-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For further work on perf_target, it'd be better off splitting the code
into a separate file.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1335417327-11796-9-git-send-email-namhyung.kim@lge.com
[ committer note: Fixed perl build by using stdbool and types.h in target.h ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_target struct will be used for taking care of cpu/thread maps
based on user's input. Since it is used on various subcommands it'd
better factoring it out.
Thanks to Arnaldo for suggesting the better name.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1335417327-11796-2-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In perf_event__parse_sample(), the array variable was not incremented
by the amount of data used by the raw_data.
That was okay until we added PERF_SAMPLE_BRANCH_STACK which depends on
the array variable pointing to the beginning of the branch stack data.
But that was not the case if branch stack was combined with raw mode
sampling. That led to bogus branch stack addresses and count.
The bug would show up with:
$ perf record -R -b foo
This patch fixes the problem by correctly moving the array pointer
forward for RAW samples.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120317222317.GA8803@quad
[ committer note: Fix also later submitted by Jiri Olsa ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf diff command is broken since:
perf hists: Threaded addition and sorting of entries
commit 1980c2ebd7
Several places were broken:
- hists data need to be collected into opened sessions instead
of into events
- session's hists data need to be initialized properly when the
session is created
- hist_entry__pcnt_snprintf: the percentage and displacement
buffer preparation must not use 'ret' because it's used
as a pointer to the final buffer
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120322133726.GB1601@m.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When event group is enabled for forked task (i.e. no target task/cpu
was specified) all events were disabled and marked ->enable_on_exec.
However they wouldn't be counted at all since only group leader will
be enabled on exec actually.
In contrast to perf stat, perf record doesn't have a real problem
as it enables all the event before proceeding. But it needs to be
fixed anyway IMHO.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1331887340-32448-2-git-send-email-namhyung.kim@lge.com
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds a new option to enable taken branch stack
sampling, i.e., leverage the PERF_SAMPLE_BRANCH_STACK feature
of perf_events.
There is a new option to active this mode: -b.
It is possible to pass a set of filters to select the type of
branches to sample.
The following filters are available:
- any : any type of branches
- any_call : any function call or system call
- any_ret : any function return or system call return
- any_ind : any indirect branch
- u: only when the branch target is at the user level
- k: only when the branch target is in the kernel
- hv: only when the branch target is in the hypervisor
Filters can be combined by passing a comma separated list
to the option:
$ perf record -b any_call,u -e cycles:u branchy
Signed-off-by: Roberto Agostino Vitillo <ravitillo@lbl.gov>
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: peterz@infradead.org
Cc: acme@redhat.com
Cc: robert.richter@amd.com
Cc: ming.m.lin@intel.com
Cc: andi@firstfloor.org
Cc: asharma@fb.com
Cc: vweaver1@eecs.utk.edu
Cc: khandual@linux.vnet.ibm.com
Cc: dsahern@gmail.com
Link: http://lkml.kernel.org/r/1328826068-11713-13-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Instead of requiring that users of perf_record_opts set
.sample_id_all_avail to true, just invert the logic, using
.sample_id_all_missing, that doesn't need to be explicitely initialized
since gcc will zero members ommitted in a struct initialization.
Just like the newly introduced .exclude_{guest,host} feature test.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ab772uzk78cwybihf0vt7kxw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow a user to collect events for multiple threads or processes
using a comma separated list.
e.g., collect data on a VM and its vhost thread:
perf top -p 21483,21485
perf stat -p 21483,21485 -ddd
perf record -p 21483,21485
or monitoring vcpu threads
perf top -t 21488,21489
perf stat -t 21488,21489 -ddd
perf record -t 21488,21489
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1328718772-16688-1-git-send-email-dsahern@gmail.com
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can get the perf bench exec stack fixes and then apply the
remaining fix for the files added after what is in perf/urgent.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch fixes an issue where perf report shows nan% for certain
perf.data files. The below is from a report for a do_fork probe:
-nan% sshd [kernel.kallsyms] [k] do_fork
-nan% packagekitd [kernel.kallsyms] [k] do_fork
-nan% dbus-daemon [kernel.kallsyms] [k] do_fork
-nan% bash [kernel.kallsyms] [k] do_fork
A git bisect shows commit f3bda2c as the cause. However, looking back
through the git history, I saw commit 640c03c which seems to have
removed the required initialization for perf_sample->period. The problem
only started showing after commit f3bda2c. The below patch re-introduces
the initialization and it fixes the problem for me.
With the below patch, for the same perf.data:
73.08% bash [kernel.kallsyms] [k] do_fork
8.97% 11-dhclient [kernel.kallsyms] [k] do_fork
6.41% sshd [kernel.kallsyms] [k] do_fork
3.85% 20-chrony [kernel.kallsyms] [k] do_fork
2.56% sendmail [kernel.kallsyms] [k] do_fork
This patch applies over current linux-tip commit 9949284.
Problem introduced in:
$ git describe 640c03c
v2.6.37-rc3-83-g640c03c
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: stable@kernel.org
Link: http://lkml.kernel.org/r/20120203170113.5190.25558.stgit@localhost6.localdomain6
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Memory in struct perf_sample is not fully initialized during parsing.
Depending on sampling data some parts may left unchanged. Zero out
struct perf_sample first to avoid access to uninitialized memory.
Cc: Ingo Molnar <mingo@elte.hu>
Link: http://lkml.kernel.org/r/1323966762-8574-2-git-send-email-robert.richter@amd.com
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The problem is that when SAMPLE_PERIOD is not set, the kernel generates
a number of samples in proportion to an event's period. Number of these
samples may be too big and the kernel throttles all samples above a
defined limit.
E.g.: I want to trace when a process sleeps. I created a process which
sleeps for 1ms and for 4ms. perf got 100 events in both cases.
swapper 0 [000] 1141.371830: sched_stat_sleep: comm=foo pid=1801 delay=1386750 [ns]
swapper 0 [000] 1141.369444: sched_stat_sleep: comm=foo pid=1801 delay=4499585 [ns]
In the first case a kernel want to send 4499585 events and in the second
case it wants to send 1386750 events. perf-reports shows that process
sleeps in both places equal time.
Instead of this we can get only one sample with an attribute period. As
result we have less data transferring between kernel and user-space and
we avoid throttling of samples.
The patch "events: Don't divide events if it has field period" added a
kernel part of this functionality.
Acked-by: Arun Sharma <asharma@fb.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: devel@openvz.org
Link: http://lkml.kernel.org/r/1324391565-1369947-1-git-send-email-avagin@openvz.org
Signed-off-by: Andrew Vagin <avagin@openvz.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's the counterpart of perf_session__parse_sample.
v2: fixed mistakes found by David Ahern.
v3: s/data/sample/
s/perf_event__change_sample/perf_event__synthesize_sample
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: devel@openvz.org
Link: http://lkml.kernel.org/r/1323266161-394927-3-git-send-email-avagin@openvz.org
Signed-off-by: Andrew Vagin <avagin@openvz.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Out of the code in 'perf record', so that we can share option parsing,
etc. Eventually will be used by 'perf top', but first 'trace' will use
it.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-hzjqsgnte1esk90ytq0ap98v@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Recently we made perf_evsel__init call hists__init, which broke the perf
python binding:
[root@emilia linux]# ./tools/perf/python/twatch.py
Traceback (most recent call last):
File "./tools/perf/python/twatch.py", line 16, in <module>
import perf
ImportError: /home/acme/git/build/perf/python/perf.so: undefined symbol: hists__init
Fix it by moving the hists__init function to its only caller, evsel.c.
This way we avoid dragging in other parts of tools/perf/util/ to the
perf python binding.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-5nffmdt5mu6ozxgj54oi4qon@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The __perf_evsel__open routing was grouping just the threads for that
specific events per cpu when we want to group all threads in all events
to the first fd opened on that cpu.
So pass the xyarray with the first event, where the other events will be
able to get that first per cpu fd.
At some point top and record will switch to using perf_evlist__open that
takes care of this detail and probably will also handle the fallback
from hw to soft counters, etc.
Reported-by: Deng-Cheng Zhu <dczhu@mips.com>
Tested-by: Deng-Cheng Zhu <dczhu@mips.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ebm34rh098i9y9v4cytfdp0x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By using a mutex just for inserting and rotating two hist_entry rb
trees, so that when sorting we can get the last batch of entries created
from the ring buffer, merge it with whatever we have processed so far
and show the output while new entries are being added.
The 'report' tool continues, for now, to do it without threading, but
will use this in the future to allow visualization of results in long
perf.data sessions while the entries are being processed.
The new 'top' tool will be the first user.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-9b05atsn0q6m7fqgrug8fk2i@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wrong pointer is being passed for raw data sanity checking, when parsing
sample event.
This ends up with invalid event and perf record being stuck in
__perf_session__process_events function during processing build IDs
(process_buildids function).
Following command hangs up in my setup:
./perf record -e raw_syscalls:sys_enter ls
The fix is to use proper pointer to the raw data instead of the 'u'
union.
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1317308709-9474-2-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, analyzing PPC data files on x86 the cpu field is always 0 and
the tid and pid are backwards. For example, analyzing a PPC file on PPC
the pid/tid fields show:
rsyslogd 1210/1212
and analyzing the same PPC file using an x86 perf binary shows:
rsyslogd 1212/1210
The problem is that the swap_op method for samples is
perf_event__all64_swap which assumes all elements in the sample_data
struct are u64s. cpu, tid and pid are u32s and need to be handled
individually. Given that the swap is done before the sample is parsed,
the simplest solution is to undo the 64-bit swap of those elements when
the sample is parsed and do the proper swap.
The RAW data field is generic and perf cannot have programmatic knowledge
of how to treat that data. Instead a warning is given to the user.
Thanks to Anton Blanchard for providing a data file for a mult-CPU
PPC system so I could verify the fix for the CPU fields.
v3 -> v4:
- fixed use of WARN_ONCE
v2 -> v3:
- used WARN_ONCE for message regarding raw data
- removed struct wrapper around union
- fixed whitespace issues
v1 -> v2:
- added a union for undoing the byte-swap on u64 and redoing swap on
u32's to address compiler errors (see git commit 65014ab3)
Cc: Anton Blanchard <anton@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1315321946-16993-1-git-send-email-dsahern@gmail.com
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Resolve to a function or variable if possible and if the sym option is
enabled.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1306782503-22002-1-git-send-email-dsahern@gmail.com
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixes two more cases where the python binding would not load:
. Not finding die(), which it shouldn't anyway, not good to just stop the
world because some particular perf.data file is invalid, just propagate
the error to the caller.
. Not finding perf_sample_size: fix it by moving it from event.c to evsel,
where it belongs, as most cases are moving to operate on an evsel object.o
One of the fixed problems:
[root@emilia ~]# python
>>> import perf
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: /home/acme/git/build/perf/python/perf.so: undefined symbol: perf_sample_size
>>>
[root@emilia ~]#
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-1hkj7b2cvgbfnoizsekjb6c9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_evsel__alloc_fd allocates an array of file descriptors with the
memory initialized to 0. The array has dimensions for cpus and threads.
Later, __perf_evsel__open calls sys_perf_event_open for each cpu and thread
dimensions. If the open fails for any of the cpus or threads then the fd's
for this event are closed and the fd entry in the array is set to -1. Now,
if the first attempt fails for the event (e.g., the event is not supported)
the remaining dimensions (cpu > 0 and thread > 0) are not touched and left
at the initialized value of 0.
builtin-stat catches ENOENT and ENOSYS failures and allows the command to
continue. The end result is that stat attempts to read from an fd of 0 which
of course is stdin and so the command hangs until you type ctrl-D.
Resolve by initializing the array to -1 since an fd < 0 is already
handled.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1306511914-8016-1-git-send-email-dsahern@gmail.com
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ensure the size of the dynamic fields such as callchains
or raw events don't overlap the whole event boundaries.
This prevents from dereferencing junk if the given size of
the callchain goes too eager.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Check that the total size of the sample fields having a fixed
size do not exceed the one of the whole event. This robustifies
the sample parsing.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
perf stat doesn't mmap and its perfectly fine for it to use task-bound
counters with inheritance.
So set the attr.inherit on the caller and leave the syscall itself to
validate it.
When the mmap fails perf_evlist__mmap will just emit a warning if this
is the failure reason.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Link: http://lkml.kernel.org/r/20110414170121.GC3229@ghostprotocols.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can reuse things like the id to attr lookup routine
(perf_evlist__id2evsel) that uses a hash table instead of the linear
lookup done in the older perf_header_attr routines, etc.
Also to make evsels/evlist more pervasive an API, simplyfing using the
emerging perf lib.
cc: Arun Sharma <arun@sharma-home.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The kernel refuses mmapping an event with the inherit flag set for
something that is systemwide (cpu == -1), and the evsel layer got this
reversed at some point, fix it.
The symtom was that the --pid and --tid parameters for 'perf record' and
'perf top' returned with -EINVAL, like:
# /tmp/build-perf/perf record -v -fo/tmp/perf.data -p 1042
Warning: ... trying to fall back to cpu-clock-ticks
Fatal: failed to mmap with 22 (Invalid argument)
Reported-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch changes the way perf stat prints event names at the end of a
run. Until now, it was trying to reconstruct the event name from its
encoding. The problem is that it would only print generic events without
their modifiers (u, k, pp).
This patch saves the event name as passed by the user in the evsel
struct and uses it to print the final event name.
This would also work in case perf is linked with a library (such as
libpfm4) which provides full PMU event tables.
$ perf stat -e cycles:u,cycles:k date
Wed Feb 16 14:58:52 CET 2011
Performance counter stats for 'date':
568600 cycles:u
2779715 cycles:k
0.001908182 seconds time elapsed
Cc: Arun Sharma <arun@sharma-home.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@gmail.com>
LPU-Reference: <4d5bdc64.98a1df0a.7aa3.06c2@mx.google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
[ committer note: Fixed a merge problem with 023695d "Add cgroup support" ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds the ability to filter monitoring based on container groups
(cgroups) for both perf stat and perf record. It is possible to monitor
multiple cgroup in parallel. There is one cgroup per event. The cgroups to
monitor are passed via a new -G option followed by a comma separated list of
cgroup names.
The cgroup filesystem has to be mounted. Given a cgroup name, the perf tool
finds the corresponding directory in the cgroup filesystem and opens it. It
then passes that file descriptor to the kernel.
Example:
$ perf stat -B -a -e cycles:u,cycles:u,cycles:u -G test1,,test2 -- sleep 1
Performance counter stats for 'sleep 1':
2,368,667,414 cycles test1
2,369,661,459 cycles
<not counted> cycles test2
1.001856890 seconds time elapsed
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4d590290.825bdf0a.7d0a.4890@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Introduced in: c52b12ed, when this sequence:
count[0] = count[1] = count[2] = 0;
Was replaced with:
aggr->val = 0;
Which is equivalent to zeroing just the first entry in the 'count'
array.
Fix it by zeroing the three entries with:
aggr->val = aggr->ena = aggr->run = 0;
Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
They were on evsel.c because they came from refactoring existing evsel
methods, so, to make reviewing the changes easier, I kept it there, now
its a plain move.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And move the event_t methods to the perf_event__ too.
No code changes, just namespace consistency.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I.e. stash the overwrite mode in struct perf_evlist and act accordingly
in perf_evlist__read_on_cpu, not checking for overwrites and touching
the tail after consuming one event, like perf record does, for instance.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Out of the {con,des}structor, as in interpreted language bindings we will
need to go back from the wrapper object to the real thing. In that case
using container_of will save us to have an extra pointer in the perf_evsel
struct.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To avoid linking more stuff in the python binding I'm working on, future
csets will make the sample type be taken from the evsel itself, but for
that we need to first have one file per cpu and per sample_type, not a
single perf.data file.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To untangle it from struct thread handling, that is tied to symbols, etc.
Right now in the python bindings I'm working on I need just a subset of
the util/ files, untangling it allows me to do that.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adopting the new model used in 'perf record', where we don't have a map
per thread per cpu, instead we have an mmap per cpu, established on the
first fd for that cpu and ask the kernel using the
PERF_EVENT_IOC_SET_OUTPUT ioctl to send events for the other fds on that
cpu for the one with the mmap.
The methods moved from perf_evsel to perf_evlist, but for easing review
they were modified in place, in evsel.c, the next patch will move the
migrated methods to evlist.c.
With this 'perf top' now uses the same mmap model used by 'perf record'
and the next patches will make 'perf record' use these new routines,
establishing a common codebase for both tools.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Out of the code in 'perf top'. Record is next in line.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As this is a per-cpu attribute, we can't set it up in advance and use it
for all the calls.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_evsel__open now have an extra boolean argument specifying if
event grouping is desired.
The first file descriptor created on a CPU becomes the group leader.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And a test for it:
[acme@felicio linux]$ perf test
1: vmlinux symtab matches kallsyms: Ok
2: detect open syscall event: Ok
3: detect open syscall event on all cpus: Ok
[acme@felicio linux]$
Translating C the test does:
1. generates different number of open syscalls on each CPU
by using sched_setaffinity
2. Verifies that the expected number of events is generated
on each CPU
It works as expected.
LKML-Reference: <new-submission>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since commit 69aad6f1(perf tools: Introduce event selectors), only
perf_event_attr::type and ::config are passed to event selector, which
makes perf tool not work correctly.
For example, PEBS does not work because perf_event_attr::precise_ip is
not passed to the syscall.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1294369869.20563.19.camel@minggr.sh.intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim