Commit Graph

210 Commits

Author SHA1 Message Date
Ilya Dryomov ed25e9b26f Btrfs: profiles filter
Select chunks based on a given profile mask.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:47 +02:00
Ilya Dryomov f43ffb60fd Btrfs: add basic infrastructure for selective balancing
This allows to have a separate set of filters for each chunk type
(data,meta,sys).  The code however is generic and switch on chunk type
is only done once.

This commit also adds a type filter: it allows to balance for example
meta and system chunks w/o touching data ones.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:47 +02:00
Ilya Dryomov c9e9f97bdf Btrfs: add basic restriper infrastructure
Add basic restriper infrastructure: extended balancing ioctl and all
related ioctl data structures, add data structure for tracking
restriper's state to fs_info, etc.  The semantics of the old balancing
ioctl are fully preserved.

Explicitly disallow any volume operations when balance is in progress.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16 22:04:47 +02:00
Li Zefan 125ccb0ae6 Btrfs: don't pass a trans handle unnecessarily in volumes.c
Some functions never use the transaction handle passed to them.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2012-01-11 10:26:42 +08:00
Chris Mason 387125fc72 Btrfs: fix barrier flushes
When btrfs is writing the super blocks, it send barrier flushes to make
sure writeback caching drives get all the metadata on disk in the
right order.

But, we have two bugs in the way these are sent down.  When doing
full commits (not via the tree log), we are sending the barrier down
before the last super when it should be going down before the first.

In multi-device setups, we should be waiting for the barriers to
complete on all devices before writing any of the supers.

Both of these bugs can cause corruptions on power failures.  We fix it
with some new code to send down empty barriers to all devices before
writing the first super.

Alexandre Oliva found the multi-device bug.  Arne Jansen did the async
barrier loop.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
Reported-by: Alexandre Oliva <oliva@lsd.ic.unicamp.br>
2011-11-20 07:21:14 -05:00
Chris Mason 806468f8bf Merge git://git.jan-o-sch.net/btrfs-unstable into integration
Conflicts:
	fs/btrfs/Makefile
	fs/btrfs/extent_io.c
	fs/btrfs/extent_io.h
	fs/btrfs/scrub.c

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-11-06 03:07:10 -05:00
Arne Jansen 90519d66ab btrfs: state information for readahead
Add state information for readahead to btrfs_fs_info and btrfs_device

Changes v2:
 - don't wait in radix_trees
 - add own set of workers for readahead

Reviewed-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-10-02 08:48:30 +02:00
Jan Schmidt a1d3c4786a btrfs: btrfs_multi_bio replaced with btrfs_bio
btrfs_bio is a bio abstraction able to split and not complete after the last
bio has returned (like the old btrfs_multi_bio). Additionally, btrfs_bio
tracks the mirror_num used to read data which can be used for error
correction purposes.

Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
2011-09-29 13:38:42 +02:00
Josef Bacik d5e2003c2b Btrfs: detect wether a device supports discard
We have a problem where if a user specifies discard but doesn't actually support
it we will return EOPNOTSUPP from btrfs_discard_extent.  This is a problem
because this gets called (in a fashion) from the tree log recovery code, which
has a nice little BUG_ON(ret) after it, which causes us to fail the tree log
replay.  So instead detect wether our devices support discard when we're adding
them and then don't issue discards if we know that the device doesn't support
it.  And just for good measure set ret = 0 in btrfs_issue_discard just in case
we still get EOPNOTSUPP so we don't screw anybody up like this again.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-08-16 21:09:15 -04:00
Chris Mason d6c0cb379c Merge branch 'cleanups_and_fixes' into inode_numbers
Conflicts:
	fs/btrfs/tree-log.c
	fs/btrfs/volumes.c

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-05-23 14:37:47 -04:00
Xiao Guangrong 1f78160ce1 Btrfs: using rcu lock in the reader side of devices list
fs_devices->devices is only updated on remove and add device paths, so we can
use rcu to protect it in the reader side

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-05-23 13:24:43 -04:00
Chris Mason 712673339a Merge branch 'for-chris' of git://git.kernel.org/pub/scm/linux/kernel/git/arne/btrfs-unstable-arne into inode_numbers
Conflicts:
	fs/btrfs/Makefile
	fs/btrfs/ctree.h
	fs/btrfs/volumes.h

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-05-23 06:30:52 -04:00
Chris Mason aa2dfb372a Merge branch 'allocator' of git://git.kernel.org/pub/scm/linux/kernel/git/arne/btrfs-unstable-arne into inode_numbers
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-05-22 12:36:34 -04:00
Arne Jansen 73c5de0051 btrfs: quasi-round-robin for chunk allocation
In a multi device setup, the chunk allocator currently always allocates
chunks on the devices in the same order. This leads to a very uneven
distribution, especially with RAID1 or RAID10 and an uneven number of
devices.
This patch always sorts the devices before allocating, and allocates the
stripes on the devices with the most available space, as long as there
is enough space available. In a low space situation, it first tries to
maximize striping.
The patch also simplifies the allocator and reduces the checks for
corner cases.
The simplification is done by several means. First, it defines the
properties of each RAID type upfront. These properties are used afterwards
instead of differentiating cases in several places.
Second, the old allocator defined a minimum stripe size for each block
group type, tried to find a large enough chunk, and if this fails just
allocates a smaller one. This is now done in one step. The largest possible
chunk (up to max_chunk_size) is searched and allocated.
Because we now have only one pass, the allocation of the map (struct
map_lookup) is moved down to the point where the number of stripes is
already known. This way we avoid reallocation of the map.
We still avoid allocating stripes that are not a multiple of STRIPE_SIZE.
2011-05-13 15:36:14 +02:00
Arne Jansen bcd53741cc btrfs: move btrfs_cmp_device_free_bytes to super.c
this function won't be used here anymore, so move it super.c where it is
used for df-calculation
2011-05-13 15:36:05 +02:00
Arne Jansen a2de733c78 btrfs: scrub
This adds an initial implementation for scrub. It works quite
straightforward. The usermode issues an ioctl for each device in the
fs. For each device, it enumerates the allocated device chunks. For
each chunk, the contained extents are enumerated and the data checksums
fetched. The extents are read sequentially and the checksums verified.
If an error occurs (checksum or EIO), a good copy is searched for. If
one is found, the bad copy will be rewritten.
All enumerations happen from the commit roots. During a transaction
commit, the scrubs get paused and afterwards continue from the new
roots.

This commit is based on the series originally posted to linux-btrfs
with some improvements that resulted from comments from David Sterba,
Ilya Dryomov and Jan Schmidt.

Signed-off-by: Arne Jansen <sensille@gmx.net>
2011-05-12 14:45:20 +02:00
David Sterba f2a97a9dbd btrfs: remove all unused functions
Remove static and global declarations and/or definitions. Reduces size
of btrfs.ko by ~3.4kB.

  text    data     bss     dec     hex filename
402081    7464     200  409745   64091 btrfs.ko.base
398620    7144     200  405964   631cc btrfs.ko.remove-all

Signed-off-by: David Sterba <dsterba@suse.cz>
2011-05-06 12:34:03 +02:00
David Sterba 621496f4fd btrfs: remove unused function prototypes
function prototypes without a body

Signed-off-by: David Sterba <dsterba@suse.cz>
2011-05-04 14:01:26 +02:00
Li Dongyang fce3bb9a1b Btrfs: make btrfs_map_block() return entire free extent for each device of RAID0/1/10/DUP
btrfs_map_block() will only return a single stripe length, but we want the
full extent be mapped to each disk when we are trimming the extent,
so we add length to btrfs_bio_stripe and fill it if we are mapping for REQ_DISCARD.

Signed-off-by: Li Dongyang <lidongyang@novell.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-03-28 05:37:45 -04:00
liubo 1abe9b8a13 Btrfs: add initial tracepoint support for btrfs
Tracepoints can provide insight into why btrfs hits bugs and be greatly
helpful for debugging, e.g
              dd-7822  [000]  2121.641088: btrfs_inode_request: root = 5(FS_TREE), gen = 4, ino = 256, blocks = 8, disk_i_size = 0, last_trans = 8, logged_trans = 0
              dd-7822  [000]  2121.641100: btrfs_inode_new: root = 5(FS_TREE), gen = 8, ino = 257, blocks = 0, disk_i_size = 0, last_trans = 0, logged_trans = 0
 btrfs-transacti-7804  [001]  2146.935420: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29368320 (orig_level = 0), cow_buf = 29388800 (cow_level = 0)
 btrfs-transacti-7804  [001]  2146.935473: btrfs_cow_block: root = 1(ROOT_TREE), refs = 2, orig_buf = 29364224 (orig_level = 0), cow_buf = 29392896 (cow_level = 0)
 btrfs-transacti-7804  [001]  2146.972221: btrfs_transaction_commit: root = 1(ROOT_TREE), gen = 8
   flush-btrfs-2-7821  [001]  2155.824210: btrfs_chunk_alloc: root = 3(CHUNK_TREE), offset = 1103101952, size = 1073741824, num_stripes = 1, sub_stripes = 0, type = DATA
   flush-btrfs-2-7821  [001]  2155.824241: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29388800 (orig_level = 0), cow_buf = 29396992 (cow_level = 0)
   flush-btrfs-2-7821  [001]  2155.824255: btrfs_cow_block: root = 4(DEV_TREE), refs = 2, orig_buf = 29372416 (orig_level = 0), cow_buf = 29401088 (cow_level = 0)
   flush-btrfs-2-7821  [000]  2155.824329: btrfs_cow_block: root = 3(CHUNK_TREE), refs = 2, orig_buf = 20971520 (orig_level = 0), cow_buf = 20975616 (cow_level = 0)
 btrfs-endio-wri-7800  [001]  2155.898019: btrfs_cow_block: root = 5(FS_TREE), refs = 2, orig_buf = 29384704 (orig_level = 0), cow_buf = 29405184 (cow_level = 0)
 btrfs-endio-wri-7800  [001]  2155.898043: btrfs_cow_block: root = 7(CSUM_TREE), refs = 2, orig_buf = 29376512 (orig_level = 0), cow_buf = 29409280 (cow_level = 0)

Here is what I have added:

1) ordere_extent:
        btrfs_ordered_extent_add
        btrfs_ordered_extent_remove
        btrfs_ordered_extent_start
        btrfs_ordered_extent_put

These provide critical information to understand how ordered_extents are
updated.

2) extent_map:
        btrfs_get_extent

extent_map is used in both read and write cases, and it is useful for tracking
how btrfs specific IO is running.

3) writepage:
        __extent_writepage
        btrfs_writepage_end_io_hook

Pages are cirtical resourses and produce a lot of corner cases during writeback,
so it is valuable to know how page is written to disk.

4) inode:
        btrfs_inode_new
        btrfs_inode_request
        btrfs_inode_evict

These can show where and when a inode is created, when a inode is evicted.

5) sync:
        btrfs_sync_file
        btrfs_sync_fs

These show sync arguments.

6) transaction:
        btrfs_transaction_commit

In transaction based filesystem, it will be useful to know the generation and
who does commit.

7) back reference and cow:
	btrfs_delayed_tree_ref
	btrfs_delayed_data_ref
	btrfs_delayed_ref_head
	btrfs_cow_block

Btrfs natively supports back references, these tracepoints are helpful on
understanding btrfs's COW mechanism.

8) chunk:
	btrfs_chunk_alloc
	btrfs_chunk_free

Chunk is a link between physical offset and logical offset, and stands for space
infomation in btrfs, and these are helpful on tracing space things.

9) reserved_extent:
	btrfs_reserved_extent_alloc
	btrfs_reserved_extent_free

These can show how btrfs uses its space.

Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-03-28 05:37:33 -04:00
Linus Torvalds eee2a817df Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (25 commits)
  Btrfs: forced readonly mounts on errors
  btrfs: Require CAP_SYS_ADMIN for filesystem rebalance
  Btrfs: don't warn if we get ENOSPC in btrfs_block_rsv_check
  btrfs: Fix memory leak in btrfs_read_fs_root_no_radix()
  btrfs: check NULL or not
  btrfs: Don't pass NULL ptr to func that may deref it.
  btrfs: mount failure return value fix
  btrfs: Mem leak in btrfs_get_acl()
  btrfs: fix wrong free space information of btrfs
  btrfs: make the chunk allocator utilize the devices better
  btrfs: restructure find_free_dev_extent()
  btrfs: fix wrong calculation of stripe size
  btrfs: try to reclaim some space when chunk allocation fails
  btrfs: fix wrong data space statistics
  fs/btrfs: Fix build of ctree
  Btrfs: fix off by one while setting block groups readonly
  Btrfs: Add BTRFS_IOC_SUBVOL_GETFLAGS/SETFLAGS ioctls
  Btrfs: Add readonly snapshots support
  Btrfs: Refactor btrfs_ioctl_snap_create()
  btrfs: Extract duplicate decompress code
  ...
2011-01-17 14:43:43 -08:00
Miao Xie 6d07bcec96 btrfs: fix wrong free space information of btrfs
When we store data by raid profile in btrfs with two or more different size
disks, df command shows there is some free space in the filesystem, but the
user can not write any data in fact, df command shows the wrong free space
information of btrfs.

 # mkfs.btrfs -d raid1 /dev/sda9 /dev/sda10
 # btrfs-show
 Label: none  uuid: a95cd49e-6e33-45b8-8741-a36153ce4b64
 	Total devices 2 FS bytes used 28.00KB
 	devid    1 size 5.01GB used 2.03GB path /dev/sda9
 	devid    2 size 10.00GB used 2.01GB path /dev/sda10
 # btrfs device scan /dev/sda9 /dev/sda10
 # mount /dev/sda9 /mnt
 # dd if=/dev/zero of=tmpfile0 bs=4K count=9999999999
   (fill the filesystem)
 # sync
 # df -TH
 Filesystem	Type	Size	Used	Avail	Use%	Mounted on
 /dev/sda9	btrfs	17G	8.6G	5.4G	62%	/mnt
 # btrfs-show
 Label: none  uuid: a95cd49e-6e33-45b8-8741-a36153ce4b64
 	Total devices 2 FS bytes used 3.99GB
 	devid    1 size 5.01GB used 5.01GB path /dev/sda9
 	devid    2 size 10.00GB used 4.99GB path /dev/sda10

It is because btrfs cannot allocate chunks when one of the pairing disks has
no space, the free space on the other disks can not be used for ever, and should
be subtracted from the total space, but btrfs doesn't subtract this space from
the total. It is strange to the user.

This patch fixes it by calcing the free space that can be used to allocate
chunks.

Implementation:
1. get all the devices free space, and align them by stripe length.
2. sort the devices by the free space.
3. check the free space of the devices,
   3.1. if it is not zero, and then check the number of the devices that has
        more free space than this device,
        if the number of the devices is beyond the min stripe number, the free
        space can be used, and add into total free space.
        if the number of the devices is below the min stripe number, we can not
        use the free space, the check ends.
   3.2. if the free space is zero, check the next devices, goto 3.1

This implementation is just likely fake chunk allocation.

After appling this patch, df can show correct space information:
 # df -TH
 Filesystem	Type	Size	Used	Avail	Use%	Mounted on
 /dev/sda9	btrfs	17G	8.6G	0	100%	/mnt

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-01-16 11:30:19 -05:00
Miao Xie b2117a39fa btrfs: make the chunk allocator utilize the devices better
With this patch, we change the handling method when we can not get enough free
extents with default size.

Implementation:
1. Look up the suitable free extent on each device and keep the search result.
   If not find a suitable free extent, keep the max free extent
2. If we get enough suitable free extents with default size, chunk allocation
   succeeds.
3. If we can not get enough free extents, but the number of the extent with
   default size is >= min_stripes, we just change the mapping information
   (reduce the number of stripes in the extent map), and chunk allocation
   succeeds.
4. If the number of the extent with default size is < min_stripes, sort the
   devices by its max free extent's size descending
5. Use the size of the max free extent on the (num_stripes - 1)th device as the
   stripe size to allocate the device space

By this way, the chunk allocator can allocate chunks as large as possible when
the devices' space is not enough and make full use of the devices.

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-01-16 11:30:19 -05:00
Linus Torvalds 275220f0fc Merge branch 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-block: (43 commits)
  block: ensure that completion error gets properly traced
  blktrace: add missing probe argument to block_bio_complete
  block cfq: don't use atomic_t for cfq_group
  block cfq: don't use atomic_t for cfq_queue
  block: trace event block fix unassigned field
  block: add internal hd part table references
  block: fix accounting bug on cross partition merges
  kref: add kref_test_and_get
  bio-integrity: mark kintegrityd_wq highpri and CPU intensive
  block: make kblockd_workqueue smarter
  Revert "sd: implement sd_check_events()"
  block: Clean up exit_io_context() source code.
  Fix compile warnings due to missing removal of a 'ret' variable
  fs/block: type signature of major_to_index(int) to major_to_index(unsigned)
  block: convert !IS_ERR(p) && p to !IS_ERR_NOR_NULL(p)
  cfq-iosched: don't check cfqg in choose_service_tree()
  fs/splice: Pull buf->ops->confirm() from splice_from_pipe actors
  cdrom: export cdrom_check_events()
  sd: implement sd_check_events()
  sr: implement sr_check_events()
  ...
2011-01-13 10:45:01 -08:00
Linus Torvalds e13cf63f2b Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: prevent RAID level downgrades when space is low
  Btrfs: account for missing devices in RAID allocation profiles
  Btrfs: EIO when we fail to read tree roots
  Btrfs: fix compiler warnings
  Btrfs: Make async snapshot ioctl more generic
  Btrfs: pwrite blocked when writing from the mmaped buffer of the same page
  Btrfs: Fix a crash when mounting a subvolume
  Btrfs: fix sync subvol/snapshot creation
  Btrfs: Fix page leak in compressed writeback path
  Btrfs: do not BUG if we fail to remove the orphan item for dead snapshots
  Btrfs: fixup return code for btrfs_del_orphan_item
  Btrfs: do not do fast caching if we are allocating blocks for tree_root
  Btrfs: deal with space cache errors better
  Btrfs: fix use after free in O_DIRECT
2010-12-14 11:08:13 -08:00
Chris Mason cd02dca564 Btrfs: account for missing devices in RAID allocation profiles
When we mount in RAID degraded mode without adding a new device to
replace the failed one, we can end up using the wrong RAID flags for
allocations.

This results in strange combinations of block groups (raid1 in a raid10
filesystem) and corruptions when we try to allocate blocks from single
spindle chunks on drives that are actually missing.

The first device has two small 4MB chunks in it that mkfs creates and
these are usually unused in a raid1 or raid10 setup.  But, in -o degraded,
the allocator will fall back to these because the mask of desired raid groups
isn't correct.

The fix here is to count the missing devices as we build up the list
of devices in the system.  This count is used when picking the
raid level to make sure we continue using the same levels that were
in place before we lost a drive.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-12-13 20:06:52 -05:00
Tejun Heo d4d7762995 block: clean up blkdev_get() wrappers and their users
After recent blkdev_get() modifications, open_by_devnum() and
open_bdev_exclusive() are simple wrappers around blkdev_get().
Replace them with blkdev_get_by_dev() and blkdev_get_by_path().

blkdev_get_by_dev() is identical to open_by_devnum().
blkdev_get_by_path() is slightly different in that it doesn't
automatically add %FMODE_EXCL to @mode.

All users are converted.  Most conversions are mechanical and don't
introduce any behavior difference.  There are several exceptions.

* btrfs now sets FMODE_EXCL in btrfs_device->mode, so there's no
  reason to OR it explicitly on blkdev_put().

* gfs2, nilfs2 and the generic mount_bdev() now set FMODE_EXCL in
  sb->s_mode.

* With the above changes, sb->s_mode now always should contain
  FMODE_EXCL.  WARN_ON_ONCE() added to kill_block_super() to detect
  errors.

The new blkdev_get_*() functions are with proper docbook comments.
While at it, add function description to blkdev_get() too.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Joern Engel <joern@lazybastard.org>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Jan Kara <jack@suse.cz>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Cc: reiserfs-devel@vger.kernel.org
Cc: xfs-masters@oss.sgi.com
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
2010-11-13 11:55:18 +01:00
Christoph Hellwig c3b9a62c8f btrfs: replace barriers with explicit flush / FUA usage
Switch to the WRITE_FLUSH_FUA flag for log writes, remove the EOPNOTSUPP
detection for barriers and stop setting the barrier flag for discards.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-10 12:35:39 +02:00
Josef Bacik ba1bf4818b Btrfs: make balance code choose more wisely when relocating
Currently, we can panic the box if the first block group we go to move is of a
type where there is no space left to move those extents.  For example, if we
fill the disk up with data, and then we try to balance and we have no room to
move the data nor room to allocate new chunks, we will panic.  Change this by
checking to see if we have room to move this chunk around, and if not, return
-ENOSPC and move on to the next chunk.  This will make sure we remove block
groups that are moveable, like if we have alot of empty metadata block groups,
and then that way we make room to be able to balance our data chunks as well.
Tested this with an fs that would panic on btrfs-vol -b normally, but no longer
panics with this patch.

V1->V2:
-actually search for a free extent on the device to make sure we can allocate a
chunk if need be.

-fix btrfs_shrink_device to make sure we actually try to relocate all the
chunks, and then if we can't return -ENOSPC so if we are doing a btrfs-vol -r
we don't remove the device with data still on it.

-check to make sure the block group we are going to relocate isn't the last one
in that particular space

-fix a bug in btrfs_shrink_device where we would change the device's size and
not fix it if we fail to do our relocate

Signed-off-by: Josef Bacik <jbacik@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-09-21 19:23:48 -04:00
Chris Mason e5e9a5206a Btrfs: avoid races between super writeout and device list updates
On multi-device filesystems, btrfs writes supers to all of the devices
before considering a sync complete.  There wasn't any additional
locking between super writeout and the device list management code
because device management was done inside a transaction and
super writeout only happened  with no transation writers running.

With the btrfs fsync log and other async transaction updates, this
has been racey for some time.  This adds a mutex to protect
the device list.  The existing volume mutex could not be reused due to
transaction lock ordering requirements.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 15:17:02 -04:00
Chris Mason c289811cc0 Btrfs: autodetect SSD devices
During mount, btrfs will check the queue nonrot flag
for all the devices found in the FS.  If they are all
non-rotating, SSD mode is enabled by default.

If the FS was mounted with -o nossd, the non-rotating
flag is ignored.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-06-10 11:29:52 -04:00
Chris Ball d6397baee4 Btrfs: When shrinking, only update disk size on success
Previously, we updated a device's size prior to attempting a shrink
operation.  This patch moves the device resizing logic to only happen if
the shrink completes successfully.  In the process, it introduces a new
field to btrfs_device -- disk_total_bytes -- to track the on-disk size.

Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-27 07:40:51 -04:00
Chris Mason ffbd517d5a Btrfs: use WRITE_SYNC for synchronous writes
Part of reducing fsync/O_SYNC/O_DIRECT latencies is using WRITE_SYNC for
writes we plan on waiting on in the near future.  This patch
mirrors recent changes in other filesystems and the generic code to
use WRITE_SYNC when WB_SYNC_ALL is passed and to use WRITE_SYNC for
other latency critical writes.

Btrfs uses async worker threads for checksumming before the write is done,
and then again to actually submit the bios.  The bio submission code just
runs a per-device list of bios that need to be sent down the pipe.

This list is split into low priority and high priority lists so the
WRITE_SYNC IO happens first.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-20 15:53:08 -04:00
Wu Fengguang d4a789474a Btrfs: fix typos in comments
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-04-02 16:46:06 -04:00
Yan Zheng e4404d6e8d Btrfs: shared seed device
This patch makes seed device possible to be shared by
multiple mounted file systems. The sharing is achieved
by cloning seed device's btrfs_fs_devices structure.
Thanks you,

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2008-12-12 10:03:26 -05:00
Yan Zheng a512bbf855 Btrfs: superblock duplication
This patch implements superblock duplication. Superblocks
are stored at offset 16K, 64M and 256G on every devices.
Spaces used by superblocks are preserved by the allocator,
which uses a reverse mapping function to find the logical
addresses that correspond to superblocks. Thank you,

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2008-12-08 16:46:26 -05:00
Christoph Hellwig 97288f2c71 Btrfs: corret fmode_t annotations
Make sure to propagate fmode_t properly and use the right constants for
it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2008-12-02 06:36:09 -05:00
Chris Mason 15916de835 Btrfs: Fixes for 2.6.28-rc API changes
* open/close_bdev_excl -> open/close_bdev_exclusive
* blkdev_issue_discard takes a GFP mask now
* Fix blkdev_issue_discard usage now that it is enabled

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-11-19 21:17:22 -05:00
Yan Zheng 2b82032c34 Btrfs: Seed device support
Seed device is a special btrfs with SEEDING super flag
set and can only be mounted in read-only mode. Seed
devices allow people to create new btrfs on top of it.

The new FS contains the same contents as the seed device,
but it can be mounted in read-write mode.

This patch does the following:

1) split code in btrfs_alloc_chunk into two parts. The first part does makes
the newly allocated chunk usable, but does not do any operation that modifies
the chunk tree. The second part does the the chunk tree modifications. This
division is for the bootstrap step of adding storage to the seed device.

2) Update device management code to handle seed device.
The basic idea is: For an FS grown from seed devices, its
seed devices are put into a list. Seed devices are
opened on demand at mounting time. If any seed device is
missing or has been changed, btrfs kernel module will
refuse to mount the FS.

3) make btrfs_find_block_group not return NULL when all
block groups are read-only.

Signed-off-by: Yan Zheng <zheng.yan@oracle.com>
2008-11-17 21:11:30 -05:00
Chris Mason 7d2b4daa67 Btrfs: Fix the multi-bio code to save the original bio for completion
The multi-bio code is responsible for duplicating blocks in raid1 and
single spindle duplication.  It has counters to make sure all of
the locations for a given extent are properly written before io completion
is returned to the higher layers.

But, it didn't always complete the same bio it was given, sometimes a
clone was completed instead.  This lead to problems with the async
work queues because they saved a pointer to the bio in a struct off
bi_private.

The fix is to remember the original bio and only complete that one.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:06 -04:00
Chris Mason 8b71284292 Btrfs: Add async worker threads for pre and post IO checksumming
Btrfs has been using workqueues to spread the checksumming load across
other CPUs in the system.  But, workqueues only schedule work on the
same CPU that queued the work, giving them a limited benefit for systems with
higher CPU counts.

This code adds a generic facility to schedule work with pools of kthreads,
and changes the bio submission code to queue bios up.  The queueing is
important to make sure large numbers of procs on the system don't
turn streaming workloads into random workloads by sending IO down
concurrently.

The end result of all of this is much higher performance (and CPU usage) when
doing checksumming on large machines.  Two worker pools are created,
one for writes and one for endio processing.  The two could deadlock if
we tried to service both from a single pool.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:03 -04:00
Chris Mason a0af469b58 Fix btrfs_open_devices to deal with changes since the scan ioctls
Devices can change after the scan ioctls are done, and btrfs_open_devices
needs to be able to verify them as they are opened and used by the FS.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:03 -04:00
Chris Mason dfe2502068 Btrfs: Add mount -o degraded to allow mounts to continue with missing devices
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:03 -04:00
Chris Mason a061fc8da7 Btrfs: Add support for online device removal
This required a few structural changes to the code that manages bdev pointers:

The VFS super block now gets an anon-bdev instead of a pointer to the
lowest bdev.  This allows us to avoid swapping the super block bdev pointer
around at run time.

The code to read in the super block no longer goes through the extent
buffer interface.  Things got ugly keeping the mapping constant.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:02 -04:00
Chris Mason a236aed14c Btrfs: Deal with failed writes in mirrored configurations
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:02 -04:00
Chris Mason ec44a35cbe Btrfs: Add balance ioctl to restripe the chunks
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:02 -04:00
Chris Mason 788f20eb5a Btrfs: Add new ioctl to add devices
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:02 -04:00
Chris Mason 8f18cf1339 Btrfs: Make the resizer work based on shrinking and growing devices
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:02 -04:00
Chris Mason b30757178d Btrfs: Add a special device list for chunk allocations
This allows other code that needs to walk every device in the FS to do so
without locking against allocations.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:02 -04:00
Chris Mason f2d8d74d78 Btrfs: Make an unplug function that doesn't unplug every spindle
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:02 -04:00
Chris Mason e17cade25f Btrfs: Add chunk uuids and update multi-device back references
Block headers now store the chunk tree uuid

Chunk items records the device uuid for each stripes

Device extent items record better back refs to the chunk tree

Block groups record better back refs to the chunk tree

The chunk tree format has also changed.  The objectid of BTRFS_CHUNK_ITEM_KEY
used to be the logical offset of the chunk.  Now it is a chunk tree id,
with the logical offset being stored in the offset field of the key.

This allows a single chunk tree to record multiple logical address spaces,
upping the number of bytes indexed by a chunk tree from 2^64 to
2^128.

Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:01 -04:00
Chris Mason f29844623d Btrfs: Write out all super blocks on commit, and bring back proper barrier support
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:01 -04:00
Chris Mason f188591e98 Btrfs: Retry metadata reads in the face of checksum failures
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:01 -04:00
Chris Mason cea9e4452e Change btrfs_map_block to return a structure with mappings for all stripes
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:01 -04:00
Chris Mason 8790d502e4 Btrfs: Add support for mirroring across drives
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:01 -04:00
Chris Mason 8a4b83cc8b Btrfs: Add support for device scanning and detection ioctls
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:01 -04:00
Chris Mason 239b14b32d Btrfs: Bring back mount -o ssd optimizations
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:01 -04:00
Chris Mason 0d81ba5dbe Btrfs: Move device information into the super block so it can be scanned
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:01 -04:00
Chris Mason 6324fbf334 Btrfs: Dynamic chunk and block group allocation
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:01 -04:00
Chris Mason 0b86a832a1 Btrfs: Add support for multiple devices per filesystem
Signed-off-by: Chris Mason <chris.mason@oracle.com>
2008-09-25 11:04:00 -04:00