When CONFIG_QCOM_AOSS_QMP=m and CONFIG_QCOM_Q6V5_MSS=y, the builtin
driver cannot call into the loadable module's low-level service
functions. Trying to build with that config combo causes linker errors.
There are two problems here. First, drivers/remoteproc/qcom_q6v5.c
should #include <linux/soc/qcom/qcom_aoss.h> for the definitions of
the service functions, depending on whether CONFIG_QCOM_AOSS_QMP is
set/enabled or not. Second, the qcom remoteproc drivers should depend
on QCOM_AOSS_QMP iff it is enabled (=y or =m) so that the qcom
remoteproc drivers can be built properly.
This prevents these build errors:
aarch64-linux-ld: drivers/remoteproc/qcom_q6v5.o: in function `q6v5_load_state_toggle':
qcom_q6v5.c:(.text+0xc4): undefined reference to `qmp_send'
aarch64-linux-ld: drivers/remoteproc/qcom_q6v5.o: in function `qcom_q6v5_deinit':
(.text+0x2e4): undefined reference to `qmp_put'
aarch64-linux-ld: drivers/remoteproc/qcom_q6v5.o: in function `qcom_q6v5_init':
(.text+0x778): undefined reference to `qmp_get'
aarch64-linux-ld: (.text+0x7d8): undefined reference to `qmp_put'
Fixes: c1fe10d238 ("remoteproc: qcom: q6v5: Use qmp_send to update co-processor load state")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: linux-remoteproc@vger.kernel.org
Cc: Sibi Sankar <sibis@codeaurora.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220115011338.2973-1-rdunlap@infradead.org
When a stop is requested on a crash, it is useless to try to shutdown it
gracefully, it is crashed.
In this case don't send the STM32_MBX_SHUTDOWN mailbox message that
will block the recovery during 500 ms, waiting an answer from the
coprocessor.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20211221143129.18415-1-arnaud.pouliquen@foss.st.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
pm_runtime_get_sync can also return 1 on success, change
to use pm_runtime_resume_and_get which return 0 only on
success.
This bug has been discovered by Dan Carpenter by using Smatch
static checker.
Fixes: 285892a74f ("remoteproc: Add Renesas rcar driver")
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
[Fixed blank line between tags]
Link: https://lore.kernel.org/r/20211216160653.203768-1-julien.massot@iot.bzh
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Add a config for the CDSP present on SM6350.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213082208.21492-7-luca.weiss@fairphone.com
Add a config for the ADSP present on SM6350.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213082208.21492-5-luca.weiss@fairphone.com
Add a config for the MPSS present on SM6350.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213082208.21492-3-luca.weiss@fairphone.com
ENABLE_M4 should be set to 1 when loading code to TCM, otherwise
you will not able to replace the firmware after you stop m4.
Besides ENABLE_M4, we still need set SW_M4C_RST, because this bit
will be automatically set with SW_M4C_NON_SCLR_RST set.
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210602064206.27004-1-peng.fan@oss.nxp.com
Renesas Gen3 platform includes a Cortex-r7 processor.
Both: the application cores (A5x) and the realtime core (CR7)
share access to the RAM and devices with the same address map,
so device addresses are equal to the Linux physical addresses.
In order to initialize this remote processor we need to:
- power on the realtime core
- put the firmware in a RAM area
- set the boot address for this firmware (reset vector)
- Deassert the reset
This initial driver allows to start and stop the Cortex R7
processor.
Signed-off-by: Julien Massot <julien.massot@iot.bzh>
Link: https://lore.kernel.org/r/20211207165829.195537-3-julien.massot@iot.bzh
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
kernel documentation specification:
"The return value, if any, should be described in a dedicated section
named Return."
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211206191858.10741-1-arnaud.pouliquen@foss.st.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The ingenic remoteproc driver requests its IRQ and then immediately
disables it.
The disable is necessary since irq_request() normally enables the IRQ. But
there is a new flag IRQF_NO_AUTOEN that when specified keeps the IRQ
disabled. Use this new flag rather than calling disable_irq().
This slightly reduce the boilerplate code and also avoids a theoretical
race condition where the IRQ could fire between irq_request() and
disable_irq().
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20211205111349.51213-1-lars@metafoo.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The K3 J721S2 SoCs have three dual-core R5F subsystems, one in MCU voltage
domain and the other two in MAIN voltage domain. These R5F clusters are
similar to the R5F clusters in J7200 SoCs.
Compatible Info is updated to support J721S2 SoCs.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Link: https://lore.kernel.org/r/20211122122726.8532-5-hnagalla@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The K3 J721S2 SoCs have two C71x DSP subsystems in MAIN voltage domain,
and there are no C66x DSP subsystems on these SoCs. The C71x DSP subsystem
is a slighly updated version of the C71x DSP subsystem on J721e. The
C71x DSPs are 64 bit machine with fixed and floating point DSP
operations.
Extend support to the C71x DSPs with J721S2 compatible strings.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Link: https://lore.kernel.org/r/20211122122726.8532-4-hnagalla@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
'priv->workqueue' is destroyed in the error handling path of the probe but
not in the remove function.
Add the missing call to release some resources.
Cc: stable <stable@vger.kernel.org>
Fixes: 2df7062002 ("remoteproc: imx_proc: enable virtio/mailbox")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/d28ca94a4031bd7297d47c2164e18885a5a6ec19.1634366546.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Use %pe format string to print return error code which
make the error message easier to understand.
Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Link: https://lore.kernel.org/r/20211102141535.28372-1-mark-pk.tsai@mediatek.com
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[Fixed capital letter in subject line]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
These both functions are only used by the remoteproc_virtio.
There is no reason to expose them in the API.
Move the functions in remoteproc_virtio.c
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211001101234.4247-4-arnaud.pouliquen@foss.st.com
We should get 'driver_data' from 'struct device' directly. Going via
platform_device is an unneeded step back and forth.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210920090522.23784-10-wsa+renesas@sang-engineering.com
In this function, devm_platform_ioremap_resource_byname() should be
suitable to simplify code.
Signed-off-by: zhaoxiao <long870912@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210906071147.9095-1-long870912@gmail.com
If 'copy_dma_range_map() fails, the memory allocated for 'rvdev' will leak.
Move the 'copy_dma_range_map()' call after the device registration so
that 'rproc_rvdev_release()' can be called to free some resources.
Also, branch to the error handling path if 'copy_dma_range_map()' instead
of a direct return to avoid some other leaks.
Fixes: e0d072782c ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Jim Quinlan <james.quinlan@broadcom.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/e6d0dad6620da4fdf847faa903f79b735d35f262.1630755377.git.christophe.jaillet@wanadoo.fr
When CONFIG_PM_SLEEP is disabled, we get a harmless warning:
drivers/remoteproc/imx_dsp_rproc.c:1145:12: error: 'imx_dsp_resume' defined but not used [-Werror=unused-function]
1145 | static int imx_dsp_resume(struct device *dev)
| ^~~~~~~~~~~~~~
drivers/remoteproc/imx_dsp_rproc.c:1110:12: error: 'imx_dsp_suspend' defined but not used [-Werror=unused-function]
1110 | static int imx_dsp_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~
Mark these as __maybe_unused to get a clean build.
Fixes: ec0e5549f3 ("remoteproc: imx_dsp_rproc: Add remoteproc driver for DSP on i.MX")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20211014075239.3714694-1-arnd@kernel.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Provide a basic driver to control DSP processor found on NXP i.MX8QM,
i.MX8QXP, i.MX8MP and i.MX8ULP.
Currently it is able to resolve addresses between DSP and main CPU,
start and stop the processor, suspend and resume.
The communication between DSP and main CPU is based on mailbox, there
are three mailbox channels (tx, rx, rxdb).
This driver was tested on NXP i.MX8QM, i.MX8QXP, i.MX8MP and i.MX8ULP.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1633944015-789-4-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
On i.MX8QM and i.MX8QXP, most devices are controlled
by System Control Unit, so add IMX_RPROC_SCU_API
method for these platform.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1633944015-789-3-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Move common structure imx_rproc_att, imx_rproc_method
and imx_rproc_dcfg to header file which can be shared with
imx_dsp_rproc driver.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1633944015-789-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The MESON_AO_RPROC_SRAM_USABLE_BITS macro is used like this:
if (priv->sram_pa & ~MESON_AO_RPROC_SRAM_USABLE_BITS) {
dev_err(dev, "SRAM address contains unusable bits\n");
The problem is that "->sram_pa" is type phys_addr_t which is potentially
64 bits. That means the MESON_AO_RPROC_SRAM_USABLE_BITS macro needs to
be a 64 bit type as well to ensure that high 32 bits are cleared.
Fixes: 6cb58ea897 ("remoteproc: meson-mx-ao-arc: Add a driver for the AO ARC remote procesor")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211004105257.GA27301@kili
Add out of reset sequence support for modem sub-system on SC7280 SoCs.
It requires access to an additional set of qaccept registers, external
power/clk control registers and halt vq6 register to put the modem back
into reset.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631886935-14691-6-git-send-email-sibis@codeaurora.org
Add support for booting the Modem DSP found on QTI SC7280 SoCs.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631886935-14691-3-git-send-email-sibis@codeaurora.org
The resources for MSM8996 are missing power domains, and adding them
makes the resources identical to the MSM8998 ones.
Rename msm8998_adsp_resource to msm8996_adsp_resource then use it
for both chips. Also add power domains to slpi_resource_init and use
it for both chips.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210926190555.278589-3-y.oudjana@protonmail.com
The SCP clock design is changed on mt8195 that doesn't need to control
SCP clock on kernel side.
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210924033935.2127-5-tinghan.shen@mediatek.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Amlogic Meson6, Meson8, Meson8b and Meson8m2 embed an ARC core in the
Always-On (AO) power-domain. This is typically used for waking up the
ARM cores after system suspend.
The configuration is spread across three different registers:
- AO_REMAP_REG0 which must be programmed to zero, it's actual purpose
is unknown. There is a second remap register which is not used in the
vendor kernel (which served as reference for this driver).
- AO_CPU_CNTL is used to start and stop the ARC core.
- AO_SECURE_REG0 in the SECBUS2 register area with unknown purpose.
To boot the ARC core we also need to enable it's gate clock and trigger
a reset.
The actual code for this ARC core can come from an ELF binary, for
example by building the Zephyr RTOS for an ARC EM4 core and then taking
"zephyr.elf" as firmware. This executable does not have any "rsc table"
so we are skipping rproc_elf_load_rsc_table (rproc_ops.parse_fw) and
rproc_elf_find_loaded_rsc_table (rproc_ops.find_loaded_rsc_table).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210921192557.1610709-3-martin.blumenstingl@googlemail.com
[Fixed header file order]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
DRAM is not io memory, so changed to ioremap_wc. This is also
aligned with core io accessories. e.g. memcpy/memset and cpu direct
access.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Peng Fan <peng.fan@nxp.com>
Reviewed-and-tested-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20210910090621.3073540-7-peng.fan@oss.nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Usually the dash '-' is preferred in node name.
So far, not dts in upstream kernel, so we just update node name
in driver.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Fixes: 5e4c124307 ("remoteproc: imx_rproc: support remote cores booted before Linux Kernel")
Reviewed-and-tested-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210910090621.3073540-6-peng.fan@oss.nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
vdev regions are typically named vdev0buffer, vdev0ring0, vdev0ring1 and
etc. Change to strncmp to cover them all.
Fixes: 8f2d896164 ("remoteproc: imx_rproc: ignore mapping vdev regions")
Reviewed-and-tested-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210910090621.3073540-5-peng.fan@oss.nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
is_iomem was introduced in the commit 40df0a91b2 ("remoteproc: add
is_iomem to da_to_va"), but the driver seemed missed to provide the io
type correctly.
This patch updates remoteproc driver to indicate the TCM on IMX are io
memories. Without the change, remoteproc kick will fail.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Peng Fan <peng.fan@nxp.com>
Reviewed-and-tested-by: Peng Fan <peng.fan@nxp.com>
Fixes: 79806d32d5 ("remoteproc: imx_rproc: support i.MX8MN/P")
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210910090621.3073540-4-peng.fan@oss.nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Currently the is_iomem is a random value in the stack which may
be default to true even on those platforms that not use iomem to
store firmware.
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Fixes: 40df0a91b2 ("remoteproc: add is_iomem to da_to_va")
Reviewed-and-tested-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210910090621.3073540-3-peng.fan@oss.nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
It seems luckliy work on i.MX platform, but it is wrong.
Need use memcpy_toio, not memcpy_fromio.
Fixes: 40df0a91b2 ("remoteproc: add is_iomem to da_to_va")
Tested-by: Dong Aisheng <aisheng.dong@nxp.com> (i.MX8MQ)
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210910090621.3073540-2-peng.fan@oss.nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The power domains exposed by the AOSS QMP driver control the load state
resources linked to modem, adsp, cdsp remoteprocs. These are used to
notify the Always on Subsystem (AOSS) that a particular co-processor is
up/down. AOSS uses this information to wait for the co-processors to
suspend before starting its sleep sequence.
These co-processors enter low-power modes independent to that of the
application processor and the load state resources linked to them are
expected to remain unaltered across system suspend/resume cycles. To
achieve this behavior lets stop using the power-domains exposed by the
AOSS QMP node and replace them with generic qmp_send interface instead.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[bjorn: Fixed up build error in q6v5_wcss_remove()]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631800770-371-5-git-send-email-sibis@codeaurora.org
There doesn't seem to be any actual build time dependency on the
RPMSG_QCOM_SMD, besides that these drivers should be a module if the smd
rpmsg code is a module. Drop the compile test dependency so that these
drivers can be used without RPMSG_QCOM_SMD being enabled. This is useful
for the qcom SoCs that are using RPMSG_QCOM_GLINK_SMEM instead of
RPMSG_QCOM_SMD and thus don't want to enable the SMD driver when it is
never used.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210823235120.1203512-2-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This include isn't used anymore because the smd functions have been
moved to the qcom_common.c file.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210823235120.1203512-1-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This chipset seems to work fine with the "generic" configuration.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728215212.18217-2-konrad.dybcio@somainline.org
[bjorn: Use "-pas" suffix for remoteprocs using TrustZone]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
When a remoteproc has crashed, rproc_report_crash() is called to
handle whatever recovery is desired. This can happen at almost any
time, often triggered by an interrupt, though it can also be
initiated by a write to debugfs file remoteproc/remoteproc*/crash.
When a crash is reported, the crash handler worker is scheduled to
run (rproc_crash_handler_work()). One thing that worker does is
call rproc_trigger_recovery(), which calls rproc_stop(). That calls
the ->stop method for any remoteproc subdevices before making the
remote processor go offline.
The Q6V5 modem remoteproc driver implements an SSR subdevice that
notifies registered drivers when the modem changes operational state
(prepare, started, stop/crash, unprepared). The IPA driver
registers to receive these notifications.
With that as context, I'll now describe the problem.
There was a situation in which buggy modem firmware led to a modem
crash very soon after system (AP) resume had begun. The crash caused
a remoteproc SSR crash notification to be sent to the IPA driver.
The problem was that, although system resume had begun, it had not
yet completed, and the IPA driver was still in a suspended state.
This scenario could happen to any driver that registers for these
SSR notifications, because they are delivered without knowledge of
the (suspend) state of registered recipient drivers.
This patch offers a simple fix for this, by having the crash
handling worker function run on the system freezable workqueue.
This workqueue does not operate if user space is frozen (for
suspend). As a result, the SSR subdevice only delivers its
crash notification when the system is fully operational (i.e.,
neither suspended nor in suspend/resume transition).
Tested-by: Siddharth Gupta <sidgup@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro>
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20210519234418.1196387-2-elder@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The remoteproc driver is split between the responsibilities of getting
the SoC-internal ARM core up and running and the external RF (aka
"Iris") part configured.
In order to satisfy the regulator framework's need of a struct device *
to look up supplies this was implemented as two different drivers, using
of_platform_populate() in the remoteproc part to probe the iris part.
Unfortunately it's possible that the iris part probe defers on yet not
available regulators and an attempt to start the remoteproc will have to
be rejected, until this has been resolved. But there's no useful
mechanism of knowing when this would be.
Instead replace the of_platform_populate() and the iris probe with a
function that rolls its own struct device, with the relevant of_node
associated that is enough to acquire regulators and clocks specified in
the DT node and that may propagate the EPROBE_DEFER back to the wcnss
device's probe.
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reported-by: Anibal Limon <anibal.limon@linaro.org>
Reported-by: Loic Poulain <loic.poulain@linaro.org>
Tested-by: Anibal Limon <anibal.limon@linaro.org>
Link: https://lore.kernel.org/r/20210312002251.3273013-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This adds support for controlling the PRU and R5F clusters on the TI
AM64x, the remote processor in i.MX7ULP, i.MX8MN/P and i.MX8ULP NXP and
the audio, compute and modem remoteprocs in the Qualcomm SC8180x
platform.
It fixes improper ordering of cdev and device creation of the remoteproc
control interface and it fixes resource leaks in the error handling path
of rproc_add() and the Qualcomm modem and wifi remoteproc drivers.
Lastly it fixes a few build warnings and replace the dummy parameter
passed in the mailbox api of the stm32 driver to something not living on
the stack.
-----BEGIN PGP SIGNATURE-----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=mf8k
-----END PGP SIGNATURE-----
Merge tag 'rproc-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
"This adds support for controlling the PRU and R5F clusters on the TI
AM64x, the remote processor in i.MX7ULP, i.MX8MN/P and i.MX8ULP NXP
and the audio, compute and modem remoteprocs in the Qualcomm SC8180x
platform.
It fixes improper ordering of cdev and device creation of the
remoteproc control interface and it fixes resource leaks in the error
handling path of rproc_add() and the Qualcomm modem and wifi
remoteproc drivers.
Lastly it fixes a few build warnings and replace the dummy parameter
passed in the mailbox api of the stm32 driver to something not living
on the stack"
* tag 'rproc-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (32 commits)
remoteproc: qcom: pas: Add SC8180X adsp, cdsp and mpss
dt-bindings: remoteproc: qcom: pas: Add SC8180X adsp, cdsp and mpss
remoteproc: imx_rproc: support i.MX8ULP
dt-bindings: remoteproc: imx_rproc: support i.MX8ULP
remoteproc: stm32: fix mbox_send_message call
remoteproc: core: Cleanup device in case of failure
remoteproc: core: Fix cdev remove and rproc del
remoteproc: core: Move validate before device add
remoteproc: core: Move cdev add before device add
remoteproc: pru: Add support for various PRU cores on K3 AM64x SoCs
dt-bindings: remoteproc: pru: Update bindings for K3 AM64x SoCs
remoteproc: qcom_wcnss: Use devm_qcom_smem_state_get()
remoteproc: qcom_q6v5: Use devm_qcom_smem_state_get() to fix missing put()
soc: qcom: smem_state: Add devm_qcom_smem_state_get()
dt-bindings: remoteproc: qcom: pas: Fix indentation warnings
remoteproc: imx-rproc: Fix IMX_REMOTEPROC configuration
remoteproc: imx_rproc: support i.MX8MN/P
remoteproc: imx_rproc: support i.MX7ULP
remoteproc: imx_rproc: make clk optional
remoteproc: imx_rproc: initial support for mutilple start/stop method
...
Here is the small set of driver core and debugfs updates for 5.14-rc1.
Included in here are:
- debugfs api cleanups (touched some drivers)
- devres updates
- tiny driver core updates and tweaks
Nothing major in here at all, and all have been in linux-next for a
while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYOM7jA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yloDQCfZOlLYXF+2KgXJQqevNnRiu7/B1gAn3aCX6xh
UWVUfu5LDIXi2uFERRT1
=Ze3R
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core changes from Greg KH:
"Here is the small set of driver core and debugfs updates for 5.14-rc1.
Included in here are:
- debugfs api cleanups (touched some drivers)
- devres updates
- tiny driver core updates and tweaks
Nothing major in here at all, and all have been in linux-next for a
while with no reported issues"
* tag 'driver-core-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (27 commits)
docs: ABI: testing: sysfs-firmware-memmap: add some memmap types.
devres: Enable trace events
devres: No need to call remove_nodes() when there none present
devres: Use list_for_each_safe_from() in remove_nodes()
devres: Make locking straight forward in release_nodes()
kernfs: move revalidate to be near lookup
drivers/base: Constify static attribute_group structs
firmware_loader: remove unneeded 'comma' macro
devcoredump: remove contact information
driver core: Drop helper devm_platform_ioremap_resource_wc()
component: Rename 'dev' to 'parent'
component: Drop 'dev' argument to component_match_realloc()
device property: Don't check for NULL twice in the loops
driver core: auxiliary bus: Fix typo in the docs
drivers/base/node.c: make CACHE_ATTR define static DEVICE_ATTR_RO
debugfs: remove return value of debugfs_create_ulong()
debugfs: remove return value of debugfs_create_bool()
scsi: snic: debugfs: remove local storage of debugfs files
b43: don't save dentries for debugfs
b43legacy: don't save dentries for debugfs
...
kernel.h is being used as a dump for all kinds of stuff for a long time.
Here is the attempt to start cleaning it up by splitting out panic and
oops helpers.
There are several purposes of doing this:
- dropping dependency in bug.h
- dropping a loop by moving out panic_notifier.h
- unload kernel.h from something which has its own domain
At the same time convert users tree-wide to use new headers, although for
the time being include new header back to kernel.h to avoid twisted
indirected includes for existing users.
[akpm@linux-foundation.org: thread_info.h needs limits.h]
[andriy.shevchenko@linux.intel.com: ia64 fix]
Link: https://lkml.kernel.org/r/20210520130557.55277-1-andriy.shevchenko@linux.intel.com
Link: https://lkml.kernel.org/r/20210511074137.33666-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Co-developed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap