For short time cable pulls, the in-flight I/O to the firmware is never
cleaned up, resulting in the behaviour of stale I/O completion causing
list_del corruption and soft lockup of the system.
On link down event, mark all the connections for recovery, causing cleanup
of all the in-flight I/O immediately.
Link: https://lore.kernel.org/r/20200908095657.26821-7-mrangankar@marvell.com
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Protect active command list for non-I/O commands like login response,
logout response, text response, and recovery cleanup of active list to
avoid list corruption.
Link: https://lore.kernel.org/r/20200908095657.26821-5-mrangankar@marvell.com
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
While aborting the I/O, the firmware cleanup task timed out and driver
deleted the I/O from active command list. Some time later the firmware
sent the cleanup task response and driver again deleted the I/O from
active command list causing firmware to send completion for non-existent
I/O and list_del corruption of active command list.
Add fix to check if I/O is present before deleting it from the active
command list to ensure firmware sends valid I/O completion and protect
against list_del corruption.
Link: https://lore.kernel.org/r/20200908095657.26821-4-mrangankar@marvell.com
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In boot from SAN scenario when qedi PCI shutdown handler is called with
active iSCSI sessions, sometimes target takes too long time to respond to
firmware connection termination request. Instead skip sending termination
ramrod and progress with unload path.
Link: https://lore.kernel.org/r/20200908095657.26821-3-mrangankar@marvell.com
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
To avoid unnecessary vector allocation when the number of fast-path queues
is less then available msix vectors, use return count from module
qed->set_fp_int.
Link: https://lore.kernel.org/r/20200908095657.26821-2-mrangankar@marvell.com
Signed-off-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 91ebc1facd ("scsi: core: remove Scsi_Cmnd typedef") removed the
Scsi_cmnd typedef but it was still mentioned in a paragraph in the "SCSI
mid_level - lower_level driver interface" documentation page. Remove this
obsolete paragraph.
Link: https://lore.kernel.org/r/20200905210211.2286172-1-nfraprado@protonmail.com
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Jonathan Corbet <corbet@lwn.net>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@protonmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
VIOS partitions with SLI-4 enabled Emulex adapters will be capable of
driving I/O in parallel through mulitple work queues or channels, and with
new hypervisor firmware that supports multiple interrupt sources an ibmvfc
NPIV single initiator can be modified to exploit end-to-end channelization
in a PowerVM environment.
VIOS hosts will also be able to expose fabric perfromance impact
notifications (FPIN) via a new asynchronous event to ibmvfc clients that
advertise support via IBMVFC_CAN_HANDLE_FPIN in their capabilities flag
during NPIV_LOGIN.
This patch introduces three new Management Datagrams (MADs) for
channelization support negotiation as well as the FPIN asynchronous
event and FPIN status flags. Follow up work is required to plumb the
ibmvfc client driver to use these new interfaces.
Link: https://lore.kernel.org/r/20200904232936.840193-2-tyreld@linux.ibm.com
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update ibmvfc.h structs to use the preferred __packed and __aligned()
attribute macros defined in include/linux/compiler_attributes.h in place of
__attribute__().
Link: https://lore.kernel.org/r/20200904232936.840193-1-tyreld@linux.ibm.com
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Setting the Auto-Hibernate Timer to zero is a valid setting which indicates
the Auto-Hibernate feature being disabled. Correctly support this setting.
In addition, when the timer value is queried from sysfs, read from the host
controller's register and return that value instead of using the RAM value.
Link: https://lore.kernel.org/r/b141cfcd7998b8933635828b56fbb64f8ad4d175.1598661071.git.nguyenb@codeaurora.org
Acked-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Bao D. Nguyen <nguyenb@codeaurora.org>
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If virtual_gb is passed while using num_parts, when creating the
partitions, virtual_gb is not respected. Set num_sectors using
get_sdebug_capacity() to pull virtual_gb if set.
Link: https://lore.kernel.org/r/20200902211434.9979-3-jpittman@redhat.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: John Pittman <jpittman@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently when using the num_parts parameter, partitions are aligned and
the end sector is one prior to the next start. This creates different
sized partitions. Create instead equally sized partitions by trimming the
end of each partition to the size of the smallest partition. This aligns
better with what one would expect from automatically created partitions and
can be helpful with testing things such as raid which often expect legs of
the same size. Minimal space is lost as the initial partition starting
size is calculated by dividing num_sectors by sdebug_num_parts.
Link: https://lore.kernel.org/r/20200902211434.9979-2-jpittman@redhat.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: John Pittman <jpittman@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update Marvell owned driver maintainers and add Marvell Upstream email
alias to the maintainers list.
Link: https://lore.kernel.org/r/20200902073430.11787-1-njavali@marvell.com
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Through the new debugfs interface the user can select fixed code
patterns. Add two new interfaces fixed_code and fixed_code1.
Link: https://lore.kernel.org/r/1598958790-232272-7-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add BIST support for phy FFE (Feed forward equalizer) setting. The user can
configure FFE through the new debugfs interface.
FFE is a parameter used for link layer control. It will affect the link
quality between the SAS controller and the backplane. In the BIST test, the
FFE interface is provided to assist board testers in optimizing link
parameters.
The modification of the FFE parameter will affect the test after BIST or
the normal running of the board. The user should save the initial FFE
values and restore them after BIST test is complete.
Link: https://lore.kernel.org/r/1598958790-232272-6-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We use "phy_id" to identify phy in the BIST code but the rest of code
always uses "phy_no". Change it for consistency.
Link: https://lore.kernel.org/r/1598958790-232272-5-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When updating PROG_PHY_LINK_RATE to set linkrate for a phy we used a
hard-coded initial value instead of getting the current value from the
register. The assumption was that this register would not be modified, but
in fact it was partially modified in a new version of hardware. The
hard-coded value we used changed the default value of the register to a an
incorrect setting and as a result the SAS controller could not change
linkrate for the phy.
Delete hard-coded value and always read the latest value of register before
updating it.
Link: https://lore.kernel.org/r/1598958790-232272-4-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The macro for OOB phy linkrate is named CFG_PROG_PHY_LINK_RATE_* but that
is inaccurate. For clarification, include OOB in macro name.
Link: https://lore.kernel.org/r/1598958790-232272-3-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
hisi_sas_slot_task_free() attempts to dereference SSP task for non-ATA
tasks. If the task is SMP, the code may reference the wrong structure
although this may not cause any problems.
To avoid this, only access to SSP task when slot->n_elem_dif is not 0 which
indicates this is an SSP task.
Link: https://lore.kernel.org/r/1598958790-232272-2-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add 256GBit speed setting to the SCSI FC transport. This speed can be
reached via FC trunking techniques.
Link: https://lore.kernel.org/r/20200831213518.48409-1-james.smart@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This addresses the following gcc warning with "make W=1":
drivers/scsi/fnic/fnic_fcs.c: In function ‘fnic_rq_cmpl_frame_recv’:
drivers/scsi/fnic/fnic_fcs.c:840:15: warning: variable
‘eth_hdrs_stripped’ set but not used [-Wunused-but-set-variable]
840 | unsigned int eth_hdrs_stripped;
| ^~~~~~~~~~~~~~~~~
Link: https://lore.kernel.org/r/20200831081126.3251288-5-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This addresses the following gcc warning with "make W=1":
drivers/scsi/fnic/fnic_fcs.c: In function ‘fnic_fcoe_send_vlan_req’:
drivers/scsi/fnic/fnic_fcs.c:379:6: warning: variable ‘fr_len’ set but
not used [-Wunused-but-set-variable]
379 | int fr_len;
| ^~~~~~
Link: https://lore.kernel.org/r/20200831081126.3251288-4-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This addresses the following gcc warning with "make W=1":
drivers/scsi/fnic/fnic_fcs.c: In function ‘is_fnic_fip_flogi_reject’:
drivers/scsi/fnic/fnic_fcs.c:317:9: warning: variable ‘els_len’ set but
not used [-Wunused-but-set-variable]
317 | size_t els_len = 0;
| ^~~~~~~
drivers/scsi/fnic/fnic_fcs.c:312:21: warning: variable ‘els_dtype’ set
but not used [-Wunused-but-set-variable]
312 | enum fip_desc_type els_dtype = 0;
| ^~~~~~~~~
Link: https://lore.kernel.org/r/20200831081126.3251288-3-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This addresses the following gcc warning with "make W=1":
drivers/scsi/fnic/fnic_main.c: In function ‘fnic_set_vlan’:
drivers/scsi/fnic/fnic_main.c:555:6: warning: variable ‘old_vlan’ set
but not used [-Wunused-but-set-variable]
555 | u16 old_vlan;
| ^~~~~~~~
Link: https://lore.kernel.org/r/20200831081126.3251288-2-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The *else* branch of the *if* (base) statement in fdomain_isa_match() is
immediately followed by the *if* (!base) statement. Simplify the code by
removing the unneeded *if*.
Link: https://lore.kernel.org/r/df68e341-5113-4cf2-b64c-dc1ad0b686ac@omprussia.ru
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A negative error code should be returned.
Link: https://lore.kernel.org/r/20200829075746.19166-1-tian.xianting@h3c.com
Acked-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Xianting Tian <tian.xianting@h3c.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
PA Layer issues a LINERESET to the PHY at the recovery step in the Power
Mode change operation. If it happens during auto or manual hibern8 enter,
even if hibern8 enter succeeds, UFS power mode shall be set to PWM-G1 mode
and kept in that mode after exit from hibern8, leading to bad performance.
Handle the LINERESET in the eh_work by restoring power mode to HS mode
after all pending reqs and tasks are cleared from doorbell.
Link: https://lore.kernel.org/r/1598321228-21093-3-git-send-email-cang@codeaurora.org
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
To recover non-fatal errors, no full reset is required, err_handler only
clears those pending TRs/TMRs so that SCSI layer can re-issue them. In
current err_handler, TRs are directly cleared from UFS host's doorbell but
not aborted from device side. However, according to the UFSHCI JEDEC spec,
the host software shall use UTP Transfer Request List Clear Register to
clear a task from UFS host's doorbell only when a UTP Transfer Request is
expected to not be completed, e.g. when the host software receives a
“FUNCTION COMPLETE” Task Management response which means a Transfer Request
was aborted. To follow the UFSHCI JEDEC spec, in err_handler, abort one TR
before clearing it from doorbell.
Link: https://lore.kernel.org/r/1598321228-21093-2-git-send-email-cang@codeaurora.org
Acked-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update driver copyright.
Link: https://lore.kernel.org/r/159864896224.13630.9798419111015060967.stgit@brunhilda
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Change Microsemi references to Microchip.
Link: https://lore.kernel.org/r/159864895592.13630.18113151805817361168.stgit@brunhilda
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Change M entry e-mail to microchip.
Change L entry e-mail for storagedev to microchip.
Link: https://lore.kernel.org/r/159864510818.12656.822985017436862534.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add entry for Microchip.
Link: https://lore.kernel.org/r/159864166227.12131.3427629298809272795.stgit@brunhilda
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
disable_irq() might sleep, replace it with disable_irq_nosync(). For
synchronisation 'irq_poll_scheduled' is sufficient
Fixes: 320e77acb3 scsi: mpt3sas: Irq poll to avoid CPU hard lockups
Link: https://lore.kernel.org/r/20200901145026.12174-1-thenzl@redhat.com
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
disable_irq() might sleep. Replace it with disable_irq_nosync() which is
sufficient as irq_poll_scheduled protects against concurrently running
complete_cmd_fusion() from megasas_irqpoll() and megasas_isr_fusion().
Link: https://lore.kernel.org/r/20200827165332.8432-1-thenzl@redhat.com
Fixes: a6ffd5bf68 scsi: megaraid_sas: Call disable_irq from process IRQ poll
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The iSCSI target login thread might get stuck with the following stack:
cat /proc/`pidof iscsi_np`/stack
[<0>] down_interruptible+0x42/0x50
[<0>] iscsit_access_np+0xe3/0x167
[<0>] iscsi_target_locate_portal+0x695/0x8ac
[<0>] __iscsi_target_login_thread+0x855/0xb82
[<0>] iscsi_target_login_thread+0x2f/0x5a
[<0>] kthread+0xfa/0x130
[<0>] ret_from_fork+0x1f/0x30
This can be reproduced via the following steps:
1. Initiator A tries to log in to iqn1-tpg1 on port 3260. After finishing
PDU exchange in the login thread and before the negotiation is finished
the the network link goes down. At this point A has not finished login
and tpg->np_login_sem is held.
2. Initiator B tries to log in to iqn2-tpg1 on port 3260. After finishing
PDU exchange in the login thread the target expects to process remaining
login PDUs in workqueue context.
3. Initiator A' tries to log in to iqn1-tpg1 on port 3260 from a new
socket. A' will wait for tpg->np_login_sem with np->np_login_timer
loaded to wait for at most 15 seconds. The lock is held by A so A'
eventually times out.
4. Before A' got timeout initiator B gets negotiation failed and calls
iscsi_target_login_drop()->iscsi_target_login_sess_out(). The
np->np_login_timer is canceled and initiator A' will hang forever.
Because A' is now in the login thread, no new login requests can be
serviced.
Fix this by moving iscsi_stop_login_thread_timer() out of
iscsi_target_login_sess_out(). Also remove iscsi_np parameter from
iscsi_target_login_sess_out().
Link: https://lore.kernel.org/r/20200729130343.24976-1-houpu@bytedance.com
Cc: stable@vger.kernel.org
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Hou Pu <houpu@bytedance.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This addresses the following gcc warning with "make W=1":
drivers/message/fusion/mptscsih.c: In function ‘mptscsih_IssueTaskMgmt’:
drivers/message/fusion/mptscsih.c:1519:17: warning: variable ‘timeleft’
set but not used [-Wunused-but-set-variable]
1519 | unsigned long timeleft;
| ^~~~~~~~
Link: https://lore.kernel.org/r/20200827125925.428357-1-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This addresses the following gcc warning with "make W=1":
drivers/scsi/isci/host.c: In function ‘sci_controller_complete_io’:
drivers/scsi/isci/host.c:2674:6: warning: variable ‘index’ set but not
used [-Wunused-but-set-variable]
2674 | u16 index;
| ^~~~~
Link: https://lore.kernel.org/r/20200827125851.428071-1-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This addresses the following gcc warning with "make W=1":
drivers/scsi/dpt_i2o.c: In function ‘adpt_slave_configure’:
drivers/scsi/dpt_i2o.c:411:12: warning: variable ‘pHba’ set but not used
[-Wunused-but-set-variable]
411 | adpt_hba* pHba;
| ^~~~
Link: https://lore.kernel.org/r/20200827125812.427753-1-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
kfree_skb() handles a NULL skb argument so the additional check is
unnecessary. Remove it.
Link: https://lore.kernel.org/r/20200827092606.32148-1-vulab@iscas.ac.cn
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix ufshcd_print_trs() to consider UFSHCD_QUIRK_PRDT_BYTE_GRAN when using
utp_transfer_req_desc::prd_table_length, so that it doesn't treat the
number of bytes as the number of entries.
Originally from Kiwoong Kim
(https://lkml.kernel.org/r/20200218233115.8185-1-kwmad.kim@samsung.com).
Link: https://lore.kernel.org/r/20200826021040.152148-1-ebiggers@kernel.org
Fixes: 26f968d7de ("scsi: ufs: Introduce UFSHCD_QUIRK_PRDT_BYTE_GRAN quirk")
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This fallthrough annotation is unreachable so we can delete it.
Link: https://lore.kernel.org/r/20200825112003.GD285523@mwanda
Fixes: c4e2fbca37 ("scsi: aacraid: Reworked scsi command submission path")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Implement 'flat space LUN addressing', which allows us to raise the max_lun
limitation to 16384. The maximum number of LUNs prior to this patch was
256.
Link: https://lore.kernel.org/r/20200821042249.5097-1-dgilbert@interlog.com
Suggested-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
It was discovered that sdparm will fail when attempting to disable write
cache on a SATA disk connected via libsas.
In the ATA command set the write cache state is controlled through the SET
FEATURES operation. This is roughly corresponds to MODE SELECT in SCSI and
the latter command is what is used in the SCSI-ATA translation layer. A
subtle difference is that a MODE SELECT carries data whereas SET FEATURES
is defined as a non-data command in ATA.
Set the DMA data direction to DMA_NONE if the requested ATA command is
identified as non-data.
[mkp: commit desc]
Fixes: fa1c1e8f1e ("[SCSI] Add SATA support to libsas")
Link: https://lore.kernel.org/r/1598426666-54544-1-git-send-email-luojiaxing@huawei.com
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Current code does not consider 'page_off' in data digest calculation. To
fix this, add a local variable 'first_sg' and set first_sg.offset to
sg->offset + page_off.
Link: https://lore.kernel.org/r/1598358910-3052-1-git-send-email-varun@chelsio.com
Fixes: e48354ce07 ("iscsi-target: Add iSCSI fabric support for target v4.1")
Cc: <stable@vger.kernel.org>
Reviewed-by: Mike Christie <michael.christie@oralce.com>
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We have two knobs to control flush for write booster,
fWriteBoosterBufferFlushDuringHibernate and fWriteBoosterBufferFlushEn.
Some vendors use only fWriteBoosterBufferFlushDuringHibernate because this
can reportedly cover most scenarios. Also, there have been some reports
that flush by fWriteBoosterBufferFlushEn could lead to increased power
consumption thanks to unexpected internal operations. Consequently, we need
a way to enable or disable fWriteBoosterEn operations. Add quirk to bypass
manual flush.
Link: https://lore.kernel.org/r/ffdb0eda30515809f0ad9ee936b26917ee9b4593.1598319701.git.kwmad.kim@samsung.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update lpfc version to 12.8.0.4
Link: https://lore.kernel.org/r/20200828175332.130300-5-james.smart@broadcom.com
Co-developed-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Nilesh Javali