Commit Graph

3473 Commits

Author SHA1 Message Date
Linus Torvalds 49569646b2 Driver core __dev* removal patches
Here are the remaining __dev* removal patches against the 3.8-rc2 tree.
 All of these patches were previously sent to the subsystem maintainers,
 most of them were picked up and pushed to you, but there were a number
 that fell through the cracks, and new drivers were added during the
 merge window, so this series cleans up the rest of the instances of
 these markings.
 
 Third time's the charm...
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlDmHOIACgkQMUfUDdst+ykTZgCePgK84Im3FFooEXJwaPbaf4ls
 lO4AoMEDoWK+BHWOsjQwFPOwFFPEN2Xh
 =6oAQ
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core __dev* removal patches - take 3 - from Greg Kroah-Hartman:
 "Here are the remaining __dev* removal patches against the 3.8-rc2
  tree.  All of these patches were previously sent to the subsystem
  maintainers, most of them were picked up and pushed to you, but there
  were a number that fell through the cracks, and new drivers were added
  during the merge window, so this series cleans up the rest of the
  instances of these markings.

  Third time's the charm...

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fixed up trivial conflict with the pinctrl pull in pinctrl-sirf.c.

* tag 'driver-core-3.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (54 commits)
  misc: remove __dev* attributes.
  include: remove __dev* attributes.
  Documentation: remove __dev* attributes.
  Drivers: misc: remove __dev* attributes.
  Drivers: block: remove __dev* attributes.
  Drivers: bcma: remove __dev* attributes.
  Drivers: char: remove __dev* attributes.
  Drivers: clocksource: remove __dev* attributes.
  Drivers: ssb: remove __dev* attributes.
  Drivers: dma: remove __dev* attributes.
  Drivers: gpu: remove __dev* attributes.
  Drivers: infinband: remove __dev* attributes.
  Drivers: memory: remove __dev* attributes.
  Drivers: mmc: remove __dev* attributes.
  Drivers: iommu: remove __dev* attributes.
  Drivers: power: remove __dev* attributes.
  Drivers: message: remove __dev* attributes.
  Drivers: macintosh: remove __dev* attributes.
  Drivers: mfd: remove __dev* attributes.
  pstore: remove __dev* attributes.
  ...
2013-01-03 16:17:50 -08:00
Greg Kroah-Hartman cad5cef62a POWERPC: drivers: remove __dev* attributes.
CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03 15:57:04 -08:00
Shan Hai ce73ec6db4 powerpc/vdso: Remove redundant locking in update_vsyscall_tz()
The locking in update_vsyscall_tz() is not only unnecessary because the vdso
code copies the data unproteced in __kernel_gettimeofday() but also
introduces a hard to reproduce race condition between update_vsyscall()
and update_vsyscall_tz(), which causes user space process to loop
forever in vdso code.

The following patch removes the locking from update_vsyscall_tz().

Locking is not only unnecessary because the vdso code copies the data
unprotected in __kernel_gettimeofday() but also erroneous because updating
the tb_update_count is not atomic and introduces a hard to reproduce race
condition between update_vsyscall() and update_vsyscall_tz(), which further
causes user space process to loop forever in vdso code.

The below scenario describes the race condition,
x==0	Boot CPU			other CPU
	proc_P: x==0
	    timer interrupt
		update_vsyscall
x==1		    x++;sync		settimeofday
					    update_vsyscall_tz
x==2						x++;sync
x==3		    sync;x++
						sync;x++
	proc_P: x==3 (loops until x becomes even)

Because the ++ operator would be implemented as three instructions and not
atomic on powerpc.

A similar change was made for x86 in commit 6c260d5863
("x86: vdso: Remove bogus locking in update_vsyscall_tz")

Signed-off-by: Shan Hai <shan.hai@windriver.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-01-03 16:45:51 +11:00
Linus Torvalds 16e024f30c Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull powerpc update from Benjamin Herrenschmidt:
 "The main highlight is probably some base POWER8 support.  There's more
  to come such as transactional memory support but that will wait for
  the next one.

  Overall it's pretty quiet, or rather I've been pretty poor at picking
  things up from patchwork and reviewing them this time around and Kumar
  no better on the FSL side it seems..."

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (73 commits)
  powerpc+of: Rename and fix OF reconfig notifier error inject module
  powerpc: mpc5200: Add a3m071 board support
  powerpc/512x: don't compile any platform DIU code if the DIU is not enabled
  powerpc/mpc52xx: use module_platform_driver macro
  powerpc+of: Export of_reconfig_notifier_[register,unregister]
  powerpc/dma/raidengine: add raidengine device
  powerpc/iommu/fsl: Add PAMU bypass enable register to ccsr_guts struct
  powerpc/mpc85xx: Change spin table to cached memory
  powerpc/fsl-pci: Add PCI controller ATMU PM support
  powerpc/86xx: fsl_pcibios_fixup_bus requires CONFIG_PCI
  drivers/virt: the Freescale hypervisor driver doesn't need to check MSR[GS]
  powerpc/85xx: p1022ds: Use NULL instead of 0 for pointers
  powerpc: Disable relocation on exceptions when kexecing
  powerpc: Enable relocation on during exceptions at boot
  powerpc: Move get_longbusy_msecs into hvcall.h and remove duplicate function
  powerpc: Add wrappers to enable/disable relocation on exceptions
  powerpc: Add set_mode hcall
  powerpc: Setup relocation on exceptions for bare metal systems
  powerpc: Move initial mfspr LPCR out of __init_LPCR
  powerpc: Add relocation on exception vector handlers
  ...
2012-12-18 09:58:09 -08:00
Catalin Marinas 0ad50c3896 compat: generic compat_sys_sched_rr_get_interval() implementation
This function is used by sparc, powerpc tile and arm64 for compat support.
 The patch adds a generic implementation with a wrapper for PowerPC to do
the u32->int sign extension.

The reason for a single patch covering powerpc, tile, sparc and arm64 is
to keep it bisectable, otherwise kernel building may fail with mismatched
function declarations.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>  [for tile]
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17 17:15:18 -08:00
Linus Torvalds 66cdd0ceaf Merge tag 'kvm-3.8-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Marcelo Tosatti:
 "Considerable KVM/PPC work, x86 kvmclock vsyscall support,
  IA32_TSC_ADJUST MSR emulation, amongst others."

Fix up trivial conflict in kernel/sched/core.c due to cross-cpu
migration notifier added next to rq migration call-back.

* tag 'kvm-3.8-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (156 commits)
  KVM: emulator: fix real mode segment checks in address linearization
  VMX: remove unneeded enable_unrestricted_guest check
  KVM: VMX: fix DPL during entry to protected mode
  x86/kexec: crash_vmclear_local_vmcss needs __rcu
  kvm: Fix irqfd resampler list walk
  KVM: VMX: provide the vmclear function and a bitmap to support VMCLEAR in kdump
  x86/kexec: VMCLEAR VMCSs loaded on all cpus if necessary
  KVM: MMU: optimize for set_spte
  KVM: PPC: booke: Get/set guest EPCR register using ONE_REG interface
  KVM: PPC: bookehv: Add EPCR support in mtspr/mfspr emulation
  KVM: PPC: bookehv: Add guest computation mode for irq delivery
  KVM: PPC: Make EPCR a valid field for booke64 and bookehv
  KVM: PPC: booke: Extend MAS2 EPN mask for 64-bit
  KVM: PPC: e500: Mask MAS2 EPN high 32-bits in 32/64 tlbwe emulation
  KVM: PPC: Mask ea's high 32-bits in 32/64 instr emulation
  KVM: PPC: e500: Add emulation helper for getting instruction ea
  KVM: PPC: bookehv64: Add support for interrupt handling
  KVM: PPC: bookehv: Remove GET_VCPU macro from exception handler
  KVM: PPC: booke: Fix get_tb() compile error on 64-bit
  KVM: PPC: e500: Silence bogus GCC warning in tlb code
  ...
2012-12-13 15:31:08 -08:00
Linus Torvalds a2013a13e6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial branch from Jiri Kosina:
 "Usual stuff -- comment/printk typo fixes, documentation updates, dead
  code elimination."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  HOWTO: fix double words typo
  x86 mtrr: fix comment typo in mtrr_bp_init
  propagate name change to comments in kernel source
  doc: Update the name of profiling based on sysfs
  treewide: Fix typos in various drivers
  treewide: Fix typos in various Kconfig
  wireless: mwifiex: Fix typo in wireless/mwifiex driver
  messages: i2o: Fix typo in messages/i2o
  scripts/kernel-doc: check that non-void fcts describe their return value
  Kernel-doc: Convention: Use a "Return" section to describe return values
  radeon: Fix typo and copy/paste error in comments
  doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c
  various: Fix spelling of "asynchronous" in comments.
  Fix misspellings of "whether" in comments.
  eisa: Fix spelling of "asynchronous".
  various: Fix spelling of "registered" in comments.
  doc: fix quite a few typos within Documentation
  target: iscsi: fix comment typos in target/iscsi drivers
  treewide: fix typo of "suport" in various comments and Kconfig
  treewide: fix typo of "suppport" in various comments
  ...
2012-12-13 12:00:02 -08:00
Linus Torvalds 9977d9b379 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal
Pull big execve/kernel_thread/fork unification series from Al Viro:
 "All architectures are converted to new model.  Quite a bit of that
  stuff is actually shared with architecture trees; in such cases it's
  literally shared branch pulled by both, not a cherry-pick.

  A lot of ugliness and black magic is gone (-3KLoC total in this one):

   - kernel_thread()/kernel_execve()/sys_execve() redesign.

     We don't do syscalls from kernel anymore for either kernel_thread()
     or kernel_execve():

     kernel_thread() is essentially clone(2) with callback run before we
     return to userland, the callbacks either never return or do
     successful do_execve() before returning.

     kernel_execve() is a wrapper for do_execve() - it doesn't need to
     do transition to user mode anymore.

     As a result kernel_thread() and kernel_execve() are
     arch-independent now - they live in kernel/fork.c and fs/exec.c
     resp.  sys_execve() is also in fs/exec.c and it's completely
     architecture-independent.

   - daemonize() is gone, along with its parts in fs/*.c

   - struct pt_regs * is no longer passed to do_fork/copy_process/
     copy_thread/do_execve/search_binary_handler/->load_binary/do_coredump.

   - sys_fork()/sys_vfork()/sys_clone() unified; some architectures
     still need wrappers (ones with callee-saved registers not saved in
     pt_regs on syscall entry), but the main part of those suckers is in
     kernel/fork.c now."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (113 commits)
  do_coredump(): get rid of pt_regs argument
  print_fatal_signal(): get rid of pt_regs argument
  ptrace_signal(): get rid of unused arguments
  get rid of ptrace_signal_deliver() arguments
  new helper: signal_pt_regs()
  unify default ptrace_signal_deliver
  flagday: kill pt_regs argument of do_fork()
  death to idle_regs()
  don't pass regs to copy_process()
  flagday: don't pass regs to copy_thread()
  bfin: switch to generic vfork, get rid of pointless wrappers
  xtensa: switch to generic clone()
  openrisc: switch to use of generic fork and clone
  unicore32: switch to generic clone(2)
  score: switch to generic fork/vfork/clone
  c6x: sanitize copy_thread(), get rid of clone(2) wrapper, switch to generic clone()
  take sys_fork/sys_vfork/sys_clone prototypes to linux/syscalls.h
  mn10300: switch to generic fork/vfork/clone
  h8300: switch to generic fork/vfork/clone
  tile: switch to generic clone()
  ...

Conflicts:
	arch/microblaze/include/asm/Kbuild
2012-12-12 12:22:13 -08:00
Linus Torvalds f57d54bab6 Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
 "The biggest change affects group scheduling: we now track the runnable
  average on a per-task entity basis, allowing a smoother, exponential
  decay average based load/weight estimation instead of the previous
  binary on-the-runqueue/off-the-runqueue load weight method.

  This will inevitably disturb workloads that were in some sort of
  borderline balancing state or unstable equilibrium, so an eye has to
  be kept on regressions.

  For that reason the new load average is only limited to group
  scheduling (shares distribution) at the moment (which was also hurting
  the most from the prior, crude weight calculation and whose scheduling
  quality wins most from this change) - but we plan to extend this to
  regular SMP balancing as well in the future, which will simplify and
  speed up things a bit.

  Other changes involve ongoing preparatory work to extend NOHZ to the
  scheduler as well, eventually allowing completely irq-free user-space
  execution."

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
  Revert "sched/autogroup: Fix crash on reboot when autogroup is disabled"
  cputime: Comment cputime's adjusting code
  cputime: Consolidate cputime adjustment code
  cputime: Rename thread_group_times to thread_group_cputime_adjusted
  cputime: Move thread_group_cputime() to sched code
  vtime: Warn if irqs aren't disabled on system time accounting APIs
  vtime: No need to disable irqs on vtime_account()
  vtime: Consolidate a bit the ctx switch code
  vtime: Explicitly account pending user time on process tick
  vtime: Remove the underscore prefix invasion
  sched/autogroup: Fix crash on reboot when autogroup is disabled
  cputime: Separate irqtime accounting from generic vtime
  cputime: Specialize irq vtime hooks
  kvm: Directly account vtime to system on guest switch
  vtime: Make vtime_account_system() irqsafe
  vtime: Gather vtime declarations to their own header file
  sched: Describe CFS load-balancer
  sched: Introduce temporary FAIR_GROUP_SCHED dependency for load-tracking
  sched: Make __update_entity_runnable_avg() fast
  sched: Update_cfs_shares at period edge
  ...
2012-12-11 18:21:38 -08:00
Linus Torvalds 090f8ccba3 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
 "Lots of activity:

   211 files changed, 8328 insertions(+), 4116 deletions(-)

  most of it on the tooling side.

  Main changes:

   * ftrace enhancements and fixes from Steve Rostedt.

   * uprobes fixes, cleanups and preparation for the ARM port from Oleg
     Nesterov.

   * UAPI fixes, from David Howels - prepares the arch/x86 UAPI
     transition

   * Separate perf tests into multiple objects, one per test, from Jiri
     Olsa.

   * Make hardware event translations available in sysfs, from Jiri
     Olsa.

   * Fixes to /proc/pid/maps parsing, preparatory to supporting data
     maps, from Namhyung Kim

   * Implement ui_progress for GTK, from Namhyung Kim

   * Add framework for automated perf_event_attr tests, where tools with
     different command line options will be run from a 'perf test', via
     python glue, and the perf syscall will be intercepted to verify
     that the perf_event_attr fields set by the tool are those expected,
     from Jiri Olsa

   * Add a 'link' method for hists, so that we can have the leader with
     buckets for all the entries in all the hists.  This new method is
     now used in the default 'diff' output, making the sum of the
     'baseline' column be 100%, eliminating blind spots.

   * libtraceevent fixes for compiler warnings trying to make perf it
     build on some distros, like fedora 14, 32-bit, some of the warnings
     really pointed to real bugs.

   * Add a browser for 'perf script' and make it available from the
     report and annotate browsers.  It does filtering to find the
     scripts that handle events found in the perf.data file used.  From
     Feng Tang

   * perf inject changes to allow showing where a task sleeps, from
     Andrew Vagin.

   * Makefile improvements from Namhyung Kim.

   * Add --pre and --post command hooks in 'stat', from Peter Zijlstra.

   * Don't stop synthesizing threads when one vanishes, this is for the
     existing threads when we start a tool like trace.

   * Use sched:sched_stat_runtime to provide a thread summary, this
     produces the same output as the 'trace summary' subcommand of
     tglx's original "trace" tool.

   * Support interrupted syscalls in 'trace'

   * Add an event duration column and filter in 'trace'.

   * There are references to the man pages in some tools, so try to
     build Documentation when installing, warning the user if that is
     not possible, from Borislav Petkov.

   * Give user better message if precise is not supported, from David
     Ahern.

   * Try to find cross-built objdump path by using the session
     environment information in the perf.data file header, from Irina
     Tirdea, original patch and idea by Namhyung Kim.

   * Diplays more output on features check for make V=1, so that one can
     figure out what is happening by looking at gcc output, etc.  From
     Jiri Olsa.

   * Add on_exit implementation for systems without one, e.g.  Android,
     from Bernhard Rosenkraenzer.

   * Only process events for vcpus of interest, helps handling large
     number of events, from David Ahern.

   * Cross compilation fixes for Android, from Irina Tirdea.

   * Add documentation on compiling for Android, from Irina Tirdea.

   * perf diff improvements from Jiri Olsa.

   * Target (task/user/cpu/syswide) handling improvements, from Namhyung
     Kim.

   * Add support in 'trace' for tracing workload given by command line,
     from Namhyung Kim.

   * ... and much more."

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (194 commits)
  uprobes: Use percpu_rw_semaphore to fix register/unregister vs dup_mmap() race
  perf evsel: Introduce is_group_member method
  perf powerpc: Use uapi/unistd.h to fix build error
  tools: Pass the target in descend
  tools: Honour the O= flag when tool build called from a higher Makefile
  tools: Define a Makefile function to do subdir processing
  perf ui: Always compile browser setup code
  perf ui: Add ui_progress__finish()
  perf ui gtk: Implement ui_progress functions
  perf ui: Introduce generic ui_progress helper
  perf ui tui: Move progress.c under ui/tui directory
  perf tools: Add basic event modifier sanity check
  perf tools: Omit group members from perf_evlist__disable/enable
  perf tools: Ensure single disable call per event in record comand
  perf tools: Fix 'disabled' attribute config for record command
  perf tools: Fix attributes for '{}' defined event groups
  perf tools: Use sscanf for parsing /proc/pid/maps
  perf tools: Add gtk.<command> config option for launching GTK browser
  perf tools: Fix compile error on NO_NEWT=1 build
  perf hists: Initialize all of he->stat with zeroes
  ...
2012-12-11 18:14:31 -08:00
Linus Torvalds 608ff1a210 Merge branch 'akpm' (Andrew's patchbomb)
Merge misc updates from Andrew Morton:
 "About half of most of MM.  Going very early this time due to
  uncertainty over the coreautounifiednumasched things.  I'll send the
  other half of most of MM tomorrow.  The rest of MM awaits a slab merge
  from Pekka."

* emailed patches from Andrew Morton: (71 commits)
  memory_hotplug: ensure every online node has NORMAL memory
  memory_hotplug: handle empty zone when online_movable/online_kernel
  mm, memory-hotplug: dynamic configure movable memory and portion memory
  drivers/base/node.c: cleanup node_state_attr[]
  bootmem: fix wrong call parameter for free_bootmem()
  avr32, kconfig: remove HAVE_ARCH_BOOTMEM
  mm: cma: remove watermark hacks
  mm: cma: skip watermarks check for already isolated blocks in split_free_page()
  mm, oom: fix race when specifying a thread as the oom origin
  mm, oom: change type of oom_score_adj to short
  mm: cleanup register_node()
  mm, mempolicy: remove duplicate code
  mm/vmscan.c: try_to_freeze() returns boolean
  mm: introduce putback_movable_pages()
  virtio_balloon: introduce migration primitives to balloon pages
  mm: introduce compaction and migration for ballooned pages
  mm: introduce a common interface for balloon pages mobility
  mm: redefine address_space.assoc_mapping
  mm: adjust address_space_operations.migratepage() return code
  arch/sparc/kernel/sys_sparc_64.c: s/COLOUR/COLOR/
  ...
2012-12-11 18:05:37 -08:00
Wen Congyang 8732794b16 numa: convert static memory to dynamically allocated memory for per node device
We use a static array to store struct node.  In many cases, we don't have
too many nodes, and some memory will be unused.  Convert it to per-device
dynamically allocated memory.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Jiang Liu <liuj97@gmail.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-11 17:22:23 -08:00
Paul Mackerras 1b400ba0cd KVM: PPC: Book3S HV: Improve handling of local vs. global TLB invalidations
When we change or remove a HPT (hashed page table) entry, we can do
either a global TLB invalidation (tlbie) that works across the whole
machine, or a local invalidation (tlbiel) that only affects this core.
Currently we do local invalidations if the VM has only one vcpu or if
the guest requests it with the H_LOCAL flag, though the guest Linux
kernel currently doesn't ever use H_LOCAL.  Then, to cope with the
possibility that vcpus moving around to different physical cores might
expose stale TLB entries, there is some code in kvmppc_hv_entry to
flush the whole TLB of entries for this VM if either this vcpu is now
running on a different physical core from where it last ran, or if this
physical core last ran a different vcpu.

There are a number of problems on POWER7 with this as it stands:

- The TLB invalidation is done per thread, whereas it only needs to be
  done per core, since the TLB is shared between the threads.
- With the possibility of the host paging out guest pages, the use of
  H_LOCAL by an SMP guest is dangerous since the guest could possibly
  retain and use a stale TLB entry pointing to a page that had been
  removed from the guest.
- The TLB invalidations that we do when a vcpu moves from one physical
  core to another are unnecessary in the case of an SMP guest that isn't
  using H_LOCAL.
- The optimization of using local invalidations rather than global should
  apply to guests with one virtual core, not just one vcpu.

(None of this applies on PPC970, since there we always have to
invalidate the whole TLB when entering and leaving the guest, and we
can't support paging out guest memory.)

To fix these problems and simplify the code, we now maintain a simple
cpumask of which cpus need to flush the TLB on entry to the guest.
(This is indexed by cpu, though we only ever use the bits for thread
0 of each core.)  Whenever we do a local TLB invalidation, we set the
bits for every cpu except the bit for thread 0 of the core that we're
currently running on.  Whenever we enter a guest, we test and clear the
bit for our core, and flush the TLB if it was set.

On initial startup of the VM, and when resetting the HPT, we set all the
bits in the need_tlb_flush cpumask, since any core could potentially have
stale TLB entries from the previous VM to use the same LPID, or the
previous contents of the HPT.

Then, we maintain a count of the number of online virtual cores, and use
that when deciding whether to use a local invalidation rather than the
number of online vcpus.  The code to make that decision is extracted out
into a new function, global_invalidates().  For multi-core guests on
POWER7 (i.e. when we are using mmu notifiers), we now never do local
invalidations regardless of the H_LOCAL flag.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-06 01:34:05 +01:00
Al Viro afa86fc426 flagday: don't pass regs to copy_thread()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28 23:43:42 -05:00
Al Viro 0bcfe54049 powerpc: switch to generic fork/clone/vfork
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28 22:14:55 -05:00
Al Viro f4091322d7 Merge branches 'no-rebases', 'arch-avr32', 'arch-blackfin', 'arch-cris', 'arch-h8300', 'arch-m32r', 'arch-mn10300', 'arch-score', 'arch-sh' and 'arch-powerpc' into for-next 2012-11-28 21:52:07 -05:00
Bill Pemberton e47034c7a1 powerpc/PCI: Remove CONFIG_HOTPLUG ifdefs
Remove conditional code based on CONFIG_HOTPLUG being false.  It's
always on now in preparation of it going away as an option.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28 12:50:22 -08:00
Frederic Weisbecker 1b2852b152 vtime: Warn if irqs aren't disabled on system time accounting APIs
System time accounting APIs such as vtime_account_system() and
vtime_account_idle() need to be irqsafe. Current callers include
irq entry, exit and kvm, all of which have been checked against that
requirement. Now it's better to grow that with an automatic check
in case we have further callers or we missed something.

Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
2012-11-20 15:42:51 +01:00
Frederic Weisbecker e3942ba040 vtime: Consolidate a bit the ctx switch code
On ia64 and powerpc, vtime context switch only consists
in flushing system and user pending time, plus a few
arch housekeeping.

Consolidate that into a generic implementation. s390 is
a special case because pending user and system time accounting
there is hard to dissociate. So it's keeping its own implementation.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
2012-11-19 16:41:32 +01:00
Frederic Weisbecker bcebdf8465 vtime: Explicitly account pending user time on process tick
All vtime implementations just flush the user time on process
tick. Consolidate that in generic code by calling a user time
accounting helper. This avoids an indirect call in ia64 and
prepare to also consolidate vtime context switch code.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
2012-11-19 16:41:21 +01:00
Frederic Weisbecker fd25b4c2f2 vtime: Remove the underscore prefix invasion
Prepending irq-unsafe vtime APIs with underscores was actually
a bad idea as the result is a big mess in the API namespace that
is even waiting to be further extended. Also these helpers
are always called from irq safe callers except kvm. Just
provide a vtime_account_system_irqsafe() for this specific
case so that we can remove the underscore prefix on other
vtime functions.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
2012-11-19 16:40:16 +01:00
Adam Buchbinder 48fc7f7e78 Fix misspellings of "whether" in comments.
"Whether" is misspelled in various comments across the tree; this
fixes them. No code changes.

Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-19 14:31:35 +01:00
Michael Neuling b0302722ee powerpc: Setup relocation on exceptions for bare metal systems
This turns on MMU on execptions via AIL field in the LPCR.

Signed-off-by: Matt Evans <matt@ozlabs.org>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 15:08:06 +11:00
Michael Neuling f7c32c24f5 powerpc: Move initial mfspr LPCR out of __init_LPCR
We want to change what's initially set in the LPCR, so start by taking the move
from LPCR out of the function and into the caller.

Signed-off-by: Matt Evans <matt@ozlabs.org>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 15:08:05 +11:00
Michael Neuling c1fb6816fb powerpc: Add relocation on exception vector handlers
POWER8/v2.07 allows exceptions to be taken with the MMU still on.

A new set of exception vectors is added at 0xc000_0000_0000_4xxx.  When the HW
takes us here, MSR IR/DR will be set already and we no longer need a costly
RFID to turn the MMU back on again.

The original 0x0 based exception vectors remain for when the HW can't leave the
MMU on.  Examples of this are when we can't trust the current MMU mappings,
like when we are changing from guest to hypervisor (HV 0 -> 1) or when the MMU
was off already.  In these cases the HW will take us to the original 0x0 based
exception vectors with the MMU off as before.

This uses the new macros added previously too implement these new execption
vectors at 0xc000_0000_0000_4xxx.  We exit these exception vectors using
mflr/blr (rather than mtspr SSR0/RFID), since we don't need the costly MMU
switch anymore.

This moves the __end_interrupts marker down past these new 0x4000 vectors since
they will need to be copied down to 0x0 when the kernel is not at 0x0.

Signed-off-by: Matt Evans <matt@ozlabs.org>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 15:08:05 +11:00
Michael Neuling 4700dfaf1e powerpc: Add new macros needed for relocation on exceptions
POWER8/v2.07 allows exceptions to be taken with the MMU still on.

A new set of exception vectors is added at 0xc000_0000_0000_4xxx.  When the HW
takes us here, MSR IR/DR will be set already and we no longer need a costly
RFID to turn the MMU back on again.

The original 0x0 based exception vectors remain for when the HW can't leave the
MMU on.  Examples of this are when we can't trust the current the MMU mappings,
like when we are changing from guest to hypervisor (HV 0 -> 1) or when the MMU
was off already.  In these cases the HW will take us to the original 0x0 based
exception vectors with the MMU off as before.

The below macros are copies of the macros used at the 0x0 offset but modified
to handle the MMU being on.  In these macros we use the link register to jump
to the secondary handlers rather than using RFID (RFID was also use to turn on
the MMU).

Signed-off-by: Matt Evans <matt@ozlabs.org>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 15:08:04 +11:00
Michael Neuling 742415d6b6 powerpc: Turn syscall handler into macros
This turns the syscall handler into macros as we are going to want to reuse
them again later.

Signed-off-by: Matt Evans <matt@ozlabs.org>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 15:08:04 +11:00
Michael Neuling 61e2390ede powerpc: Make load_hander handle upto 64k offset
If we change load_hander() to use an ori instead of addi, we can load handlers
upto 64k away provided we are still 64k aligned.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 15:08:03 +11:00
Michael Neuling faab4dd2d2 powerpc: Remove unessessary 0x3000 location enforcement
This removes the large gap between 0x1800 and 0x3000.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 15:08:03 +11:00
Michael Neuling 278a6cdc39 powerpc: Whitespace changes in exception64s.S
Remove redundancy spaces and make tab usage consistent.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 15:08:02 +11:00
Benjamin Herrenschmidt de1bb03af7 Merge branch 'dt' into next 2012-11-15 15:02:44 +11:00
Anton Blanchard 11ee7e99f3 powerpc: Fix CONFIG_RELOCATABLE=y CONFIG_CRASH_DUMP=n build
If we build a kernel with CONFIG_RELOCATABLE=y CONFIG_CRASH_DUMP=n,
the kernel fails when we run at a non zero offset. It turns out
we were incorrectly wrapping some of the relocatable kernel code
with CONFIG_CRASH_DUMP.

Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: <stable@kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 15:02:03 +11:00
Michael Neuling c674e703cb powerpc: Add POWER8 architected mode to cputable
A PVR of 0x0F000004 means we are arch v2.07 complicate ie, POWER8.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 15:02:00 +11:00
Michael Neuling df77c79920 powerpc/pseries: Update ibm,architecture.vec for PAPR 2.7/POWER8
Update ibm,architecture.vec for POWER8 and allows us to support more
than one parition per core.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 15:01:39 +11:00
Aravinda Prasad a53fd61ac2 powerpc/ptrace: Enable hardware breakpoint upon re-registering
On powerpc, ptrace will disable hardware breakpoint request once the
breakpoint is hit. It is the responsibility of the caller to set it
again. However, when the caller sets the hardware breakpoint again
using ptrace(PTRACE_SET_DEBUGREG, child_pid, 0, addr), the hardware
breakpoint is not enabled.

While gdb's approach is to unregister and re-register the hardware
breakpoint every time the breakpoint is hit - which is working fine,
this could affect other programs trying to re-register hardware
breakpoint without unregistering.

This patch enables hardware breakpoint if the caller is re-registering.

Signed-off-by: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 13:01:13 +11:00
Akinobu Mita c5a0809a24 powerpc/iommu: Use bitmap library
- Caluculate the bitmap size with BITS_TO_LONGS()
 - Use bitmap_empty() to verify that all bits are cleared

This also includes a printk to pr_warn() conversion.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 13:01:04 +11:00
Michael Neuling 51cf2b30a5 powerpc: Fix denorm symbol name
Fix global symbol name to match actual denorm_exception_hv label.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 13:00:48 +11:00
Michael Neuling 71e1849724 powerpc: POWER8 cputable entry
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 13:00:45 +11:00
Michael Neuling aec937b1ee powerpc: Add POWER8 setup code
Just a copy of POWER7 for now.  Will update with new code later.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 13:00:42 +11:00
Michael Neuling cd5daaf713 powerpc: make POWER7 setup code name generic
We are going to reuse this in POWER8 so make the name generic.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 13:00:39 +11:00
Michael Neuling ec1b33dcd2 powerpc/ptrace: Remove unused addr parameter in ppc_del_hwdebug()
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 13:00:29 +11:00
Michael Neuling 84295dfc59 powerpc/ptrace: Fix spelling mistake
s/intruction/instruction/

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 13:00:26 +11:00
K.Prasad 6c7a2856ad powerpc/hw-breakpoint: Use generic hw-breakpoint interfaces for new PPC ptrace flags
PPC_PTRACE_GETHWDBGINFO, PPC_PTRACE_SETHWDEBUG and PPC_PTRACE_DELHWDEBUG are
PowerPC specific ptrace flags that use the watchpoint register. While they are
targeted primarily towards BookE users, user-space applications such as GDB
have started using them for BookS too. This patch enables the use of generic
hardware breakpoint interfaces for these new flags.

Apart from the usual benefits of using generic hw-breakpoint interfaces, these
changes allow debuggers (such as GDB) to use a common set of ptrace flags for
their watchpoint needs and allow more precise breakpoint specification (length
of the variable can be specified).

Mikey added: rebased and added dbginfo.features around #ifdef
             CONFIG_HAVE_HW_BREAKPOINT

Signed-off-by: K.Prasad <prasad@linux.vnet.ibm.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 13:00:23 +11:00
Michael Ellerman 16b86bf252 powerpc: Remove no longer used ppc_md.idle_loop()
The last user of ppc_md.idle_loop() was removed when we dropped the
legacy iSeries code, in commit 8ee3e0d.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 13:00:20 +11:00
Li Zhong 12660b1702 powerpc: Fix MAX_STACK_TRACE_ENTRIES too low warning !
This patch tries to fix the following BUG report:

[    0.012313] BUG: MAX_STACK_TRACE_ENTRIES too low!
[    0.012318] turning off the locking correctness validator.
[    0.012321] Call Trace:
[    0.012330] [c00000017666f6d0] [c000000000012128] .show_stack+0x78/0x184 (unreliable)
[    0.012339] [c00000017666f780] [c0000000000b6348] .save_trace+0x12c/0x14c
[    0.012345] [c00000017666f800] [c0000000000b7448] .mark_lock+0x2bc/0x710
[    0.012351] [c00000017666f8b0] [c0000000000bb198] .__lock_acquire+0x748/0xaec
[    0.012357] [c00000017666f9b0] [c0000000000bb684] .lock_acquire+0x148/0x194
[    0.012365] [c00000017666fa80] [c00000000069371c] .mutex_lock_nested+0x84/0x4ec
[    0.012372] [c00000017666fb90] [c000000000096998] .smpboot_register_percpu_thread+0x3c/0x10c
[    0.012380] [c00000017666fc30] [c0000000009ba910] .spawn_ksoftirqd+0x28/0x48
[    0.012386] [c00000017666fcb0] [c00000000000a98c] .do_one_initcall+0xd8/0x1d0
[    0.012392] [c00000017666fd60] [c00000000000b1f8] .kernel_init+0x120/0x398

[    0.012398] [c00000017666fe30] [c000000000009ad4] .ret_from_kernel_thread+0x5c/0x64
[    0.012404] [c00000017666fa00] [c00000017666fb20] 0xc00000017666fb20
[    0.012410] [c00000017666fa80] [c00000000069371c] .mutex_lock_nested+0x84/0x4ec
[    0.012416] [c00000017666fb90] [c000000000096998] .smpboot_register_percpu_thread+0x3c/0x10c
[    0.012422] [c00000017666fc30] [c0000000009ba910] .spawn_ksoftirqd+0x28/0x48
[    0.012427] [c00000017666fcb0] [c00000000000a98c] .do_one_initcall+0xd8/0x1d0
[    0.012433] [c00000017666fd60] [c00000000000b1f8] .kernel_init+0x120/0x398

[    0.012439] [c00000017666fe30] [c000000000009ad4] .ret_from_kernel_thread+0x5c/0x64
.......

The reason is that the back chain of c00000017666fe30
(ret_from_kernel_thread) contains some invalid value, which might form a
loop.

Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 13:00:17 +11:00
Benjamin Herrenschmidt ab7f961a58 powerpc/powernv: Fix OPAL debug entry
OPAL provides the firmware base/entry in registers at boot time
for debugging purposes. We had a bug in the code trying to stash
these into the appropriate kernel globals (a line of code was
probably dropped by accident back when this was merged)

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 13:00:14 +11:00
Julia Lawall bc26957c6c powerpc/rtas_flash: Eliminate possible double free
The function initialize_flash_pde_data is only called four times.  All four
calls are in the function rtas_flash_init, and on the failure of any of the
calls, remove_flash_pde is called on the third argument of each of the
calls.  There is thus no need for initialize_flash_pde_data to call
remove_flash_pde on the same argument.  remove_flash_pde kfrees the data
field of its argument, and does not clear that field, so this amounts ot a
possible double free.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r@
identifier f,free,a;
parameter list[n] ps;
type T;
expression e;
@@

f(ps,T a,...) {
  ... when any
      when != a = e
  if(...) { ... free(a); ... return ...; }
  ... when any
}

@@
identifier r.f,r.free;
expression x,a;
expression list[r.n] xs;
@@

* x = f(xs,a,...);
  if (...) { ... free(a); ... return ...; }
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 13:00:11 +11:00
Michael Ellerman 6432200aa8 powerpc/udbg: Remove unused udbg_read()
The last user of udbg_read() was removed in 2005, in commit fca5dcd
"Simplify and clean up the xmon terminal I/O".

Given we haven't needed it for 7 years we can probably drop it.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 12:59:33 +11:00
Tony Breeds 0dc3289c79 powerpc: Add asm/debug.h to get powerpc_debugfs_root
Since the "Disintegrate asm/system.h for PowerPC"
(ae3a197e3d) This has been failing when
DEBUG is #defined.

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 12:59:27 +11:00
Nathan Fontenot f459d63e16 powerpc+of: Remove the pSeries_reconfig.h file
Remove the pSeries_reconfig.h header file. At this point there is only one
definition in the file, pSeries_coalesce_init(), which can be
moved to rtas.h.

Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15 12:56:55 +11:00