Commit Graph

1491 Commits

Author SHA1 Message Date
Linus Torvalds b0a1ea51bd Merge branch 'for-4.3/blkcg' of git://git.kernel.dk/linux-block
Pull blk-cg updates from Jens Axboe:
 "A bit later in the cycle, but this has been in the block tree for a a
  while.  This is basically four patchsets from Tejun, that improve our
  buffered cgroup writeback.  It was dependent on the other cgroup
  changes, but they went in earlier in this cycle.

  Series 1 is set of 5 patches that has cgroup writeback updates:

   - bdi_writeback iteration fix which could lead to some wb's being
     skipped or repeated during e.g. sync under memory pressure.

   - Simplification of wb work wait mechanism.

   - Writeback tracepoints updated to report cgroup.

  Series 2 is is a set of updates for the CFQ cgroup writeback handling:

     cfq has always charged all async IOs to the root cgroup.  It didn't
     have much choice as writeback didn't know about cgroups and there
     was no way to tell who to blame for a given writeback IO.
     writeback finally grew support for cgroups and now tags each
     writeback IO with the appropriate cgroup to charge it against.

     This patchset updates cfq so that it follows the blkcg each bio is
     tagged with.  Async cfq_queues are now shared across cfq_group,
     which is per-cgroup, instead of per-request_queue cfq_data.  This
     makes all IOs follow the weight based IO resource distribution
     implemented by cfq.

     - Switched from GFP_ATOMIC to GFP_NOWAIT as suggested by Jeff.

     - Other misc review points addressed, acks added and rebased.

  Series 3 is the blkcg policy cleanup patches:

     This patchset contains assorted cleanups for blkcg_policy methods
     and blk[c]g_policy_data handling.

     - alloc/free added for blkg_policy_data.  exit dropped.

     - alloc/free added for blkcg_policy_data.

     - blk-throttle's async percpu allocation is replaced with direct
       allocation.

     - all methods now take blk[c]g_policy_data instead of blkcg_gq or
       blkcg.

  And finally, series 4 is a set of patches cleaning up the blkcg stats
  handling:

    blkcg's stats have always been somwhat of a mess.  This patchset
    tries to improve the situation a bit.

     - The following patches added to consolidate blkcg entry point and
       blkg creation.  This is in itself is an improvement and helps
       colllecting common stats on bio issue.

     - per-blkg stats now accounted on bio issue rather than request
       completion so that bio based and request based drivers can behave
       the same way.  The issue was spotted by Vivek.

     - cfq-iosched implements custom recursive stats and blk-throttle
       implements custom per-cpu stats.  This patchset make blkcg core
       support both by default.

     - cfq-iosched and blk-throttle keep track of the same stats
       multiple times.  Unify them"

* 'for-4.3/blkcg' of git://git.kernel.dk/linux-block: (45 commits)
  blkcg: use CGROUP_WEIGHT_* scale for io.weight on the unified hierarchy
  blkcg: s/CFQ_WEIGHT_*/CFQ_WEIGHT_LEGACY_*/
  blkcg: implement interface for the unified hierarchy
  blkcg: misc preparations for unified hierarchy interface
  blkcg: separate out tg_conf_updated() from tg_set_conf()
  blkcg: move body parsing from blkg_conf_prep() to its callers
  blkcg: mark existing cftypes as legacy
  blkcg: rename subsystem name from blkio to io
  blkcg: refine error codes returned during blkcg configuration
  blkcg: remove unnecessary NULL checks from __cfqg_set_weight_device()
  blkcg: reduce stack usage of blkg_rwstat_recursive_sum()
  blkcg: remove cfqg_stats->sectors
  blkcg: move io_service_bytes and io_serviced stats into blkcg_gq
  blkcg: make blkg_[rw]stat_recursive_sum() to be able to index into blkcg_gq
  blkcg: make blkcg_[rw]stat per-cpu
  blkcg: add blkg_[rw]stat->aux_cnt and replace cfq_group->dead_stats with it
  blkcg: consolidate blkg creation in blkcg_bio_issue_check()
  blk-throttle: improve queue bypass handling
  blkcg: move root blkg lookup optimization from throtl_lookup_tg() to __blkg_lookup()
  blkcg: inline [__]blkg_lookup()
  ...
2015-09-10 18:56:14 -07:00
Linus Torvalds 519f526d39 ARM:
- Full debug support for arm64
 - Active state switching for timer interrupts
 - Lazy FP/SIMD save/restore for arm64
 - Generic ARMv8 target
 
 PPC:
 - Book3S: A few bug fixes
 - Book3S: Allow micro-threading on POWER8
 
 x86:
 - Compiler warnings
 
 Generic:
 - Adaptive polling for guest halt
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJV7qd/AAoJEL/70l94x66DDBcH/2OLomKHjDOGXqJ/dpkqf4UU
 FYI1pVjs2zP4z3L7RYV/DeuEsD6XaWzS7EXQOS3mcb9d8GWahPrdofeVmpmhg/8y
 jmkuUEFHl2Ut6imk8qDlG3m42c86Mk8/1k38l1bp8S3lL0/Q7IyADyYAlHdwzpOx
 yEyOAE4VU4n+VyQH5dbnzc12QRTeHfRQc/dI3eQq238gf37SF/1qzOzeLIdbEa+N
 DCzqQ8SExbctiRaLzCY5Ogan+unZBQbFfhrDrUSryywrzo/8WRFVmbjuf5O5Ucxa
 +UTLMvmm1YgxvBvWhlcmA+HSzSVeWNvaHQ9illgE5+74G5CzaD2ukurmoz/+r+A=
 =XtrL
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull more kvm updates from Paolo Bonzini:
 "ARM:
   - Full debug support for arm64
   - Active state switching for timer interrupts
   - Lazy FP/SIMD save/restore for arm64
   - Generic ARMv8 target

  PPC:
   - Book3S: A few bug fixes
   - Book3S: Allow micro-threading on POWER8

  x86:
   - Compiler warnings

  Generic:
   - Adaptive polling for guest halt"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (49 commits)
  kvm: irqchip: fix memory leak
  kvm: move new trace event outside #ifdef CONFIG_KVM_ASYNC_PF
  KVM: trace kvm_halt_poll_ns grow/shrink
  KVM: dynamic halt-polling
  KVM: make halt_poll_ns per-vCPU
  Silence compiler warning in arch/x86/kvm/emulate.c
  kvm: compile process_smi_save_seg_64() only for x86_64
  KVM: x86: avoid uninitialized variable warning
  KVM: PPC: Book3S: Fix typo in top comment about locking
  KVM: PPC: Book3S: Fix size of the PSPB register
  KVM: PPC: Book3S HV: Exit on H_DOORBELL if HOST_IPI is set
  KVM: PPC: Book3S HV: Fix race in starting secondary threads
  KVM: PPC: Book3S: correct width in XER handling
  KVM: PPC: Book3S HV: Fix preempted vcore stolen time calculation
  KVM: PPC: Book3S HV: Fix preempted vcore list locking
  KVM: PPC: Book3S HV: Implement H_CLEAR_REF and H_CLEAR_MOD
  KVM: PPC: Book3S HV: Fix bug in dirty page tracking
  KVM: PPC: Book3S HV: Fix race in reading change bit when removing HPTE
  KVM: PPC: Book3S HV: Implement dynamic micro-threading on POWER8
  KVM: PPC: Book3S HV: Make use of unused threads when running guests
  ...
2015-09-10 16:42:49 -07:00
Linus Torvalds 59a47fff02 Mostly this is just clean ups and micro optimizations.
The changes with more meat are:
 
  o Allowing the trace event filters to filter on CPU number and process ids
 
  o Two new markers for trace output latency were added
     (10 and 100 msec latencies)
 
  o Have tracing_thresh filter function profiling time
 
 I also worked on modifying the ring buffer code for some future
 work, and moved the adding of the timestamp around. One of my changes
 caused a regression, and since other changes were built on top of it
 and already tested, I had to operate a revert of that change. Instead
 of rebasing, this change set has the code that caused a regression
 as well as the code to revert that change without touching the other
 changes that were made on top of it.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJV6aZEAAoJEEjnJuOKh9ldrR4H/A1RcQf1prLLoUibPP4w3lat
 dmQcdpS1NY+cqyiKuKPAOkFDGQL7qWzRqZ8whcPSJIsHq57ufqNSLf+0bbQYPzg9
 g3CgGL7OApmGi5ulj0sNxhadvc9TFm/SAN0nVJlNuUWdm8e1UWHLsrJZaMfopu2r
 RDEtkOhg619mhDL4rktNdS6rk0B92Fhu2o2PwLZPVlUl1NNEt4WJU+ejitXUVO1A
 Nb70/rTGGJKtyHbW+74on4LnEN5Uu0Viu6rMwGfYyIgRmC2otdBDvE4xfKMiTUKr
 SzBjzrhIoMIRn4Vl0vElfulkpYaw7pcC2BdpZ4d9VpIOiLSlZs0x/TgCtpFEv5M=
 =baZ3
 -----END PGP SIGNATURE-----

Merge tag 'trace-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing update from Steven Rostedt:
 "Mostly this is just clean ups and micro optimizations.

  The changes with more meat are:

   - Allowing the trace event filters to filter on CPU number and
     process ids

   - Two new markers for trace output latency were added (10 and 100
     msec latencies)

   - Have tracing_thresh filter function profiling time

  I also worked on modifying the ring buffer code for some future work,
  and moved the adding of the timestamp around.  One of my changes
  caused a regression, and since other changes were built on top of it
  and already tested, I had to operate a revert of that change.  Instead
  of rebasing, this change set has the code that caused a regression as
  well as the code to revert that change without touching the other
  changes that were made on top of it"

* tag 'trace-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ring-buffer: Revert "ring-buffer: Get timestamp after event is allocated"
  tracing: Don't make assumptions about length of string on task rename
  tracing: Allow triggers to filter for CPU ids and process names
  ftrace: Format MCOUNT_ADDR address as type unsigned long
  tracing: Introduce two additional marks for delay
  ftrace: Fix function_graph duration spacing with 7-digits
  ftrace: add tracing_thresh to function profile
  tracing: Clean up stack tracing and fix fentry updates
  ring-buffer: Reorganize function locations
  ring-buffer: Make sure event has enough room for extend and padding
  ring-buffer: Get timestamp after event is allocated
  ring-buffer: Move the adding of the extended timestamp out of line
  ring-buffer: Add event descriptor to simplify passing data
  ftrace: correct the counter increment for trace_buffer data
  tracing: Fix for non-continuous cpu ids
  tracing: Prefer kcalloc over kzalloc with multiply
2015-09-08 14:04:14 -07:00
Wanpeng Li 3dfe6a5073 kvm: move new trace event outside #ifdef CONFIG_KVM_ASYNC_PF
Fixes compilation with ppc64_defconfig.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-08 11:16:40 +02:00
Wanpeng Li 2cbd78244f KVM: trace kvm_halt_poll_ns grow/shrink
Tracepoint for dynamic halt_pool_ns, fired on every potential change.

Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-06 16:33:14 +02:00
Linus Torvalds 9cfcc658da media updates for v4.3-rc1
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJV6ifEAAoJEAhfPr2O5OEVn5kP/i2jM1tWcmV/ZEBKGAN0jpRk
 5Y/Q+rnXvOpIJSQC3dEkweoBymVMclSgSB/wFSWCZtp5MaB8KrH4/2uc3UvolF91
 7bqXt+fCUacMbDQyaabMCR83mz9tdOJLd5sf0ABqBgXGfwh5uXmBPaYBzmcYvKcW
 4D89MFUpaFDPARTs9rdpVyr0aPRU4GcN0R3snRO9Ly+cQnyV/RxPf9NqCgnI+yPq
 +NvA9ScUBcBt62piSIGR4egcAR8boxYC+0r57340S21/JVMvsHQ3ok9b1aT8/rtd
 Yl24FkcKrRV0ShN5S1RmW5DLH/HRGabuMjkiEz9xq52FGD2sQQda0At58dWivsa4
 XYdxS9UUfb9Z+qyeMdmCl1MUFRrV2G4H6VItP+GKyT3UZLEDcLl6hBg3SkyWxWB4
 CSO5WuRThiIB86OVcIaREftzqDy5HdvH3ZKRD7QrW0DItGVjQwV5j6gvwqO9OEXs
 99BnSohyKwUBonumE2ZtFGGhIwIomllrMSqg991bPH9+13bg/rPxUqntkPrVap/9
 cV3qKO8ZFrz5UInBnR1U83l60ZK7rV4G6AVMSMKpM9XVK9TDKryAUN9Mhj5XWRH8
 hbma89TQVdhdrITtt27uzj8F622cvZvxd1BqDBR8DjKVvtv/E2GPzJrAj7GHe3/o
 NgzP5fF6X2Si32GNb7J8
 =cIed
 -----END PGP SIGNATURE-----

Merge tag 'media/v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:
 - new DVB frontend drivers: ascot2e, cxd2841er, horus3a, lnbh25
 - new HDMI capture driver: tc358743
 - new driver for NetUP DVB new boards (netup_unidvb)
 - IR support for DVBSky cards (smipcie-ir)
 - Coda driver has gain macroblock tiling support
 - Renesas R-Car gains JPEG codec driver
 - new DVB platform driver for STi boards: c8sectpfe
 - added documentation for the media core kABI to device-drivers DocBook
 - lots of driver fixups, cleanups and improvements

* tag 'media/v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (297 commits)
  [media] c8sectpfe: Remove select on undefined LIBELF_32
  [media] i2c: fix platform_no_drv_owner.cocci warnings
  [media] cx231xx: Use wake_up_interruptible() instead of wake_up_interruptible_nr()
  [media] tc358743: only queue subdev notifications if devnode is set
  [media] tc358743: add missing Kconfig dependency/select
  [media] c8sectpfe: Use %pad to print 'dma_addr_t'
  [media] DocBook media: Fix typo "the the" in xml files
  [media] tc358743: make reset gpio optional
  [media] tc358743: set direction of reset gpio using devm_gpiod_get
  [media] dvbdev: document most of the functions/data structs
  [media] dvb_frontend.h: document the struct dvb_frontend
  [media] dvb-frontend.h: document struct dtv_frontend_properties
  [media] dvb-frontend.h: document struct dvb_frontend_ops
  [media] dvb: Use DVBFE_ALGO_HW where applicable
  [media] dvb_frontend.h: document struct analog_demod_ops
  [media] dvb_frontend.h: Document struct dvb_tuner_ops
  [media] Docbook: Document struct analog_parameters
  [media] dvb_frontend.h: get rid of dvbfe_modcod
  [media] add documentation for struct dvb_tuner_info
  [media] dvb_frontend: document dvb_frontend_tune_settings
  ...
2015-09-05 18:21:14 -07:00
Linus Torvalds 17447717a3 Nothing major, but:
- Add Jeff Layton as an nfsd co-maintainer: no change to
           existing practice, just an acknowledgement of the status quo.
         - Two patches ("nfsd: ensure that...") for a race overlooked by
           the state locking rewrite, causing a crash noticed by multiple
           users.
         - Lots of smaller bugfixes all over from Kinglong Mee.
         - From Jeff, some cleanup of server rpc code in preparation for
           possible shift of nfsd threads to workqueues.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJV6fbLAAoJECebzXlCjuG+qGkP/j2YnZynwqCa4uz1+FU7qfYI
 kZWNGFFQ7O7e1i9Wznp7BkSA020rvM5d1HPwZhtstURM3i52XWRtbppwKF2+IuEU
 tpNdPKb28BPCZO29Z8mQk9IS2sX5jmBiibXRqBk0VK7e43PXrIwg1LJJ9HOfOpLh
 b1MvxdEB7vqK+fAVIYyhlg0UDd5AHAkQ+vS8YuohRXbDcsdhhE4vmusLlUl5UKp8
 5Yunz+b+pXfXPYaKidmpar6U2KoRSTPP1uO3bNfN6URO1W1nchPadLs0DnsBKlhb
 U8II5RZEmc+YfiIMoeptkJHoNhWT6Zu7CNJR6B0USTKv4L6TmFQVpxptVutzYVwx
 sGJ65lvCiXXOPz8JJwvBty//HTmbyOiCm64/vMbhQRlSNLSmcmTXEpw/uT5Huaxx
 bX9lnznoVVCd3eRoXPwMdZTbg/uEKqREZsQWVoqA6gexYqeyp79kvGbttLoUJ27Z
 IjtNb9W6akxfPKrHMgan6j7dy866o6TdSfWRayHwUoswbNnVOnMYKHjApOtF0oev
 k2pdLuy9tjl2a9Ow9sSwHZDbNsXgJO76E0aYnSTBP/YvctlG7KoZ+E0oxa6DWTC+
 0dE+g1xhIuUtW5WRL4pfWWk1G7jnf16J91bKkn91VveDn666RncAbLBtePmpIcIu
 5Ah6KxztTVCW++i5pmHh
 =aecc
 -----END PGP SIGNATURE-----

Merge tag 'nfsd-4.3' of git://linux-nfs.org/~bfields/linux

Pull nfsd updates from Bruce Fields:
 "Nothing major, but:

   - Add Jeff Layton as an nfsd co-maintainer: no change to existing
     practice, just an acknowledgement of the status quo.

   - Two patches ("nfsd: ensure that...") for a race overlooked by the
     state locking rewrite, causing a crash noticed by multiple users.

   - Lots of smaller bugfixes all over from Kinglong Mee.

   - From Jeff, some cleanup of server rpc code in preparation for
     possible shift of nfsd threads to workqueues"

* tag 'nfsd-4.3' of git://linux-nfs.org/~bfields/linux: (52 commits)
  nfsd: deal with DELEGRETURN racing with CB_RECALL
  nfsd: return CLID_INUSE for unexpected SETCLIENTID_CONFIRM case
  nfsd: ensure that delegation stateid hash references are only put once
  nfsd: ensure that the ol stateid hash reference is only put once
  net: sunrpc: fix tracepoint Warning: unknown op '->'
  nfsd: allow more than one laundry job to run at a time
  nfsd: don't WARN/backtrace for invalid container deployment.
  fs: fix fs/locks.c kernel-doc warning
  nfsd: Add Jeff Layton as co-maintainer
  NFSD: Return word2 bitmask if setting security label in OPEN/CREATE
  NFSD: Set the attributes used to store the verifier for EXCLUSIVE4_1
  nfsd: SUPPATTR_EXCLCREAT must be encoded before SECURITY_LABEL.
  nfsd: Fix an FS_LAYOUT_TYPES/LAYOUT_TYPES encode bug
  NFSD: Store parent's stat in a separate value
  nfsd: Fix two typos in comments
  lockd: NLM grace period shouldn't block NFSv4 opens
  nfsd: include linux/nfs4.h in export.h
  sunrpc: Switch to using hash list instead single list
  sunrpc/nfsd: Remove redundant code by exports seq_operations functions
  sunrpc: Store cache_detail in seq_file's private directly
  ...
2015-09-05 17:26:24 -07:00
Linus Torvalds 6c0f568e84 Merge branch 'akpm' (patches from Andrew)
Merge patch-bomb from Andrew Morton:

 - a few misc things

 - Andy's "ambient capabilities"

 - fs/nofity updates

 - the ocfs2 queue

 - kernel/watchdog.c updates and feature work.

 - some of MM.  Includes Andrea's userfaultfd feature.

[ Hadn't noticed that userfaultfd was 'default y' when applying the
  patches, so that got fixed in this merge instead.  We do _not_ mark
  new features that nobody uses yet 'default y'   - Linus ]

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
  mm/hugetlb.c: make vma_has_reserves() return bool
  mm/madvise.c: make madvise_behaviour_valid() return bool
  mm/memory.c: make tlb_next_batch() return bool
  mm/dmapool.c: change is_page_busy() return from int to bool
  mm: remove struct node_active_region
  mremap: simplify the "overlap" check in mremap_to()
  mremap: don't do uneccesary checks if new_len == old_len
  mremap: don't do mm_populate(new_addr) on failure
  mm: move ->mremap() from file_operations to vm_operations_struct
  mremap: don't leak new_vma if f_op->mremap() fails
  mm/hugetlb.c: make vma_shareable() return bool
  mm: make GUP handle pfn mapping unless FOLL_GET is requested
  mm: fix status code which move_pages() returns for zero page
  mm: memcontrol: bring back the VM_BUG_ON() in mem_cgroup_swapout()
  genalloc: add support of multiple gen_pools per device
  genalloc: add name arg to gen_pool_get() and devm_gen_pool_create()
  mm/memblock: WARN_ON when nid differs from overlap region
  Documentation/features/vm: add feature description and arch support status for batched TLB flush after unmap
  mm: defer flush of writable TLB entries
  mm: send one IPI per CPU to TLB flush all entries after unmapping pages
  ...
2015-09-05 14:27:38 -07:00
Mel Gorman 5b74283ab2 x86, mm: trace when an IPI is about to be sent
When unmapping pages it is necessary to flush the TLB.  If that page was
accessed by another CPU then an IPI is used to flush the remote CPU.  That
is a lot of IPIs if kswapd is scanning and unmapping >100K pages per
second.

There already is a window between when a page is unmapped and when it is
TLB flushed.  This series increases the window so multiple pages can be
flushed using a single IPI.  This should be safe or the kernel is hosed
already.

Patch 1 simply made the rest of the series easier to write as ftrace
        could identify all the senders of TLB flush IPIS.

Patch 2 tracks what CPUs potentially map a PFN and then sends an IPI
        to flush the entire TLB.

Patch 3 tracks when there potentially are writable TLB entries that
        need to be batched differently

Patch 4 increases SWAP_CLUSTER_MAX to further batch flushes

The performance impact is documented in the changelogs but in the optimistic
case on a 4-socket machine the full series reduces interrupts from 900K
interrupts/second to 60K interrupts/second.

This patch (of 4):

It is easy to trace when an IPI is received to flush a TLB but harder to
detect what event sent it.  This patch makes it easy to identify the
source of IPIs being transmitted for TLB flushes on x86.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-04 16:54:41 -07:00
Linus Torvalds abebcdfb64 sound updates for 4.3-rc1
There are little changes in core part, but lots of development are
 found in drivers, especially ASoC.  The diffstat shows regmap-
 related changes for a slight API additions / changes, and that's all.
 
 Looking at the code size statistics, the most significant addition
 is for Intel Skylake.  (Note that SKL support is still underway, the
 codec driver is missing.)  Also STI controller driver is a major
 addition as well as a few new codec drivers.
 
 In HD-audio side, there are fewer changes than the past.  The
 noticeable change is the support of ELD notification from i915
 graphics driver.  Thus this pull request carries a few changes in
 drm/i915.
 
 Other than that, USB-audio got a rewrite of runtime PM code.  It
 was initiated by lockdep warning, but resulted in a good cleanup in
 the end.
 
 Below are the highlights:
 
 Common:
 - Factoring out of AC'97 reset code from ASoC into the core helper
 - A few regmap API extensions (in case it's not pulled yet)
 
 ASoC:
 - New drivers for Cirrus CS4349, GTM601, InvenSense ICS43432, Realtek
   RT298 and ST STI controllers
 - Machine drivers for Rockchip systems with MAX98090 and RT5645 and
   RT5650
 - Initial driver support for Intel Skylake devices
 - Lots of rsnd cleanup and enhancements
 - A few DAPM fixes and cleanups
 - A large number of cleanups in various drivers (conversion and
   standardized to regmap, component) mostly by Lars-Peter and Axel
 
 HD-audio:
 - Extended HD-audio core for Intel Skylake controller support
 - Quirks for Dell headsets, Alienware 15
 - Clean up of pin-based quirk tables for Realtek codecs
 - ELD notifier implenetation for Intel HDMI/DP
 
 USB-audio:
 - Refactor runtime PM code to make lockdep happier
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJV6TwJAAoJEGwxgFQ9KSmkZoEP/06GrsGlfgIfBbnlAKcsZ0t0
 RDDCbxmwD8IsjTk180Gs3qBuhVPurhmPxq6Leow5fBktkEK5bIN3eAQkO9aIMroW
 xxU1UF6Q9XE2j97e/PhhUld7/NP0IQK/YTMuwX74G2kfEkA9Lktl4UjNMw9mKJX2
 8OIwz8ZuqSG60znmGlgiqRE4M3Svs1L/jVP1wrPg2DXQfe+ptAJpUTsyVGOMRWm3
 IaJ9h5OelPg8Jm61zcg6/pgsdYx4oquCV5wLwMz8rzIUfHb7ox8F7YKOzB+sXtYI
 zcsTfF2CqifoBcQAh9c+XE4+gMamAdheA+uc8ScUkcskucTj4Fr5tXLiPSN9QMt4
 QGOOVjqcpWv5rWwAgzUJvl1/PT4HyQfkXn5tEQVGdg9Ab1SIcQBzD1+nHUV94vKZ
 N7/grMdqJ56zUGK2fEcBS6BEDlaSToOIHDrQ1iPFNBvmW8qjBq9tYaufTGC6Vtj2
 0YKJukzIbyqLIgQtQf44aqLouFIz2lq437PqRQ4W+9C3FwGN9FKCYJ/JzvOGDIJa
 sSjEwQkJ9vnmZ3E2B30NKb24TG8pPq9WPIN2Rqe5EbHctU3gEnMScwvmG7SmCSG5
 LtDVr6Q5XKFM56cVb7tdZl6Jv97BvGu6EERM+zN+8YyMver206rC8upWOev6R2q3
 asvLDEchv7Qm3upx+PYg
 =/sXs
 -----END PGP SIGNATURE-----

Merge tag 'sound-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "There are little changes in core part, but lots of development are
  found in drivers, especially ASoC.  The diffstat shows regmap-related
  changes for a slight API additions / changes, and that's all.

  Looking at the code size statistics, the most significant addition is
  for Intel Skylake.  (Note that SKL support is still underway, the
  codec driver is missing.) Also STI controller driver is a major
  addition as well as a few new codec drivers.

  In HD-audio side, there are fewer changes than the past.  The
  noticeable change is the support of ELD notification from i915
  graphics driver.  Thus this pull request carries a few changes in
  drm/i915.

  Other than that, USB-audio got a rewrite of runtime PM code.  It was
  initiated by lockdep warning, but resulted in a good cleanup in the
  end.

  Below are the highlights:

  Common:
   - Factoring out of AC'97 reset code from ASoC into the core helper
   - A few regmap API extensions (in case it's not pulled yet)

  ASoC:
   - New drivers for Cirrus CS4349, GTM601, InvenSense ICS43432, Realtek
     RT298 and ST STI controllers
   - Machine drivers for Rockchip systems with MAX98090 and RT5645 and
     RT5650
   - Initial driver support for Intel Skylake devices
   - Lots of rsnd cleanup and enhancements
   - A few DAPM fixes and cleanups
   - A large number of cleanups in various drivers (conversion and
     standardized to regmap, component) mostly by Lars-Peter and Axel

  HD-audio:
   - Extended HD-audio core for Intel Skylake controller support
   - Quirks for Dell headsets, Alienware 15
   - Clean up of pin-based quirk tables for Realtek codecs
   - ELD notifier implenetation for Intel HDMI/DP

  USB-audio:
   - Refactor runtime PM code to make lockdep happier"

* tag 'sound-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (411 commits)
  drm/i915: Add locks around audio component bind/unbind
  drm/i915: Drop port_mst_index parameter from pin/eld callback
  ALSA: hda - Fix missing inline for dummy snd_hdac_set_codec_wakeup()
  ALSA: hda - Wake the codec up on pin/ELD notify events
  ALSA: hda - allow codecs to access the i915 pin/ELD callback
  drm/i915: Call audio pin/ELD notify function
  drm/i915: Add audio pin sense / ELD callback
  ASoC: zx296702-i2s: Fix resource leak when unload module
  ASoC: sti_uniperif: Ensure component is unregistered when unload module
  ASoC: au1x: psc-i2s: Convert to use devm_ioremap_resource
  ASoC: sh: dma-sh7760: Convert to devm_snd_soc_register_platform
  ASoC: spear_pcm: Use devm_snd_dmaengine_pcm_register to fix resource leak
  ALSA: fireworks/bebob/dice/oxfw: fix substreams counting at vmalloc failure
  ASoC: Clean up docbook warnings
  ASoC: txx9: Convert to devm_snd_soc_register_platform
  ASoC: pxa: Convert to devm_snd_soc_register_platform
  ASoC: nuc900: Convert to devm_snd_soc_register_platform
  ASoC: blackfin: Convert to devm_snd_soc_register_platform
  ASoC: au1x: Convert to devm_snd_soc_register_platform
  ASoC: qcom: Constify asoc_qcom_lpass_cpu_dai_ops
  ...
2015-09-04 11:46:02 -07:00
Linus Torvalds 4c12ab7e5e Merge tag 'for-f2fs-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
 "The major work includes fixing and enhancing the existing extent_cache
  feature, which has been well settling down so far and now it becomes a
  default mount option accordingly.

  Also, this version newly registers a f2fs memory shrinker to reclaim
  several objects consumed by a couple of data structures in order to
  avoid memory pressures.

  Another new feature is to add ioctl(F2FS_GARBAGE_COLLECT) which
  triggers a cleaning job explicitly by users.

  Most of the other patches are to fix bugs occurred in the corner cases
  across the whole code area"

* tag 'for-f2fs-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (85 commits)
  f2fs: upset segment_info repair
  f2fs: avoid accessing NULL pointer in f2fs_drop_largest_extent
  f2fs: update extent tree in batches
  f2fs: fix to release inode correctly
  f2fs: handle f2fs_truncate error correctly
  f2fs: avoid unneeded initializing when converting inline dentry
  f2fs: atomically set inode->i_flags
  f2fs: fix wrong pointer access during try_to_free_nids
  f2fs: use __GFP_NOFAIL to avoid infinite loop
  f2fs: lookup neighbor extent nodes for merging later
  f2fs: split __insert_extent_tree_ret for readability
  f2fs: kill dead code in __insert_extent_tree
  f2fs: adjust showing of extent cache stat
  f2fs: add largest/cached stat in extent cache
  f2fs: fix incorrect mapping for bmap
  f2fs: add annotation for space utilization of regular/inline dentry
  f2fs: fix to update cached_en of extent tree properly
  f2fs: fix typo
  f2fs: check the node block address of newly allocated nid
  f2fs: go out for insert_inode_locked failure
  ...
2015-09-03 13:10:22 -07:00
Linus Torvalds e31fb9e005 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext3 removal, quota & udf fixes from Jan Kara:
 "The biggest change in the pull is the removal of ext3 filesystem
  driver (~28k lines removed).  Ext4 driver is a full featured
  replacement these days and both RH and SUSE use it for several years
  without issues.  Also there are some workarounds in VM & block layer
  mainly for ext3 which we could eventually get rid of.

  Other larger change is addition of proper error handling for
  dquot_initialize().  The rest is small fixes and cleanups"

[ I wasn't convinced about the ext3 removal and worried about things
  falling through the cracks for legacy users, but ext4 maintainers
  piped up and were all unanimously in favor of removal, and maintaining
  all legacy ext3 support inside ext4.   - Linus ]

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Don't modify filesystem for read-only mounts
  quota: remove an unneeded condition
  ext4: memory leak on error in ext4_symlink()
  mm/Kconfig: NEED_BOUNCE_POOL: clean-up condition
  ext4: Improve ext4 Kconfig test
  block: Remove forced page bouncing under IO
  fs: Remove ext3 filesystem driver
  doc: Update doc about journalling layer
  jfs: Handle error from dquot_initialize()
  reiserfs: Handle error from dquot_initialize()
  ocfs2: Handle error from dquot_initialize()
  ext4: Handle error from dquot_initialize()
  ext2: Handle error from dquot_initalize()
  quota: Propagate error from ->acquire_dquot()
2015-09-03 12:28:30 -07:00
Linus Torvalds dd5cdb48ed Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Another merge window, another set of networking changes.  I've heard
  rumblings that the lightweight tunnels infrastructure has been voted
  networking change of the year.  But what do I know?

   1) Add conntrack support to openvswitch, from Joe Stringer.

   2) Initial support for VRF (Virtual Routing and Forwarding), which
      allows the segmentation of routing paths without using multiple
      devices.  There are some semantic kinks to work out still, but
      this is a reasonably strong foundation.  From David Ahern.

   3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov.

   4) Ignore route nexthops with a link down state in ipv6, just like
      ipv4.  From Andy Gospodarek.

   5) Remove spinlock from fast path of act_gact and act_mirred, from
      Eric Dumazet.

   6) Document the DSA layer, from Florian Fainelli.

   7) Add netconsole support to bcmgenet, systemport, and DSA.  Also
      from Florian Fainelli.

   8) Add Mellanox Switch Driver and core infrastructure, from Jiri
      Pirko.

   9) Add support for "light weight tunnels", which allow for
      encapsulation and decapsulation without bearing the overhead of a
      full blown netdevice.  From Thomas Graf, Jiri Benc, and a cast of
      others.

  10) Add Identifier Locator Addressing support for ipv6, from Tom
      Herbert.

  11) Support fragmented SKBs in iwlwifi, from Johannes Berg.

  12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia.

  13) Add BQL support to 3c59x driver, from Loganaden Velvindron.

  14) Stop using a zero TX queue length to mean that a device shouldn't
      have a qdisc attached, use an explicit flag instead.  From Phil
      Sutter.

  15) Use generic geneve netdevice infrastructure in openvswitch, from
      Pravin B Shelar.

  16) Add infrastructure to avoid re-forwarding a packet in software
      that was already forwarded by a hardware switch.  From Scott
      Feldman.

  17) Allow AF_PACKET fanout function to be implemented in a bpf
      program, from Willem de Bruijn"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits)
  netfilter: nf_conntrack: make nf_ct_zone_dflt built-in
  netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled
  net: fec: clear receive interrupts before processing a packet
  ipv6: fix exthdrs offload registration in out_rt path
  xen-netback: add support for multicast control
  bgmac: Update fixed_phy_register()
  sock, diag: fix panic in sock_diag_put_filterinfo
  flow_dissector: Use 'const' where possible.
  flow_dissector: Fix function argument ordering dependency
  ixgbe: Resolve "initialized field overwritten" warnings
  ixgbe: Remove bimodal SR-IOV disabling
  ixgbe: Add support for reporting 2.5G link speed
  ixgbe: fix bounds checking in ixgbe_setup_tc for 82598
  ixgbe: support for ethtool set_rxfh
  ixgbe: Avoid needless PHY access on copper phys
  ixgbe: cleanup to use cached mask value
  ixgbe: Remove second instance of lan_id variable
  ixgbe: use kzalloc for allocating one thing
  flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c
  ixgbe: Remove unused PCI bus types
  ...
2015-09-03 08:08:17 -07:00
David Ahern 9b8ff51822 net: Make table id type u32
A number of VRF patches used 'int' for table id. It should be u32 to be
consistent with the rest of the stack.

Fixes:
4e3c89920c ("net: Introduce VRF related flags and helpers")
15be405eb2 ("net: Add inet_addr lookup by table")
30bbaa1950 ("net: Fix up inet_addr_type checks")
021dd3b8a1 ("net: Add routes to the table associated with the device")
dc028da54e ("inet: Move VRF table lookup to inlined function")
f6d3c19274 ("net: FIB tracepoints")

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-01 14:32:44 -07:00
Linus Torvalds a1d8561172 Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
 "The biggest change in this cycle is the rewrite of the main SMP load
  balancing metric: the CPU load/utilization.  The main goal was to make
  the metric more precise and more representative - see the changelog of
  this commit for the gory details:

    9d89c257df ("sched/fair: Rewrite runnable load and utilization average tracking")

  It is done in a way that significantly reduces complexity of the code:

    5 files changed, 249 insertions(+), 494 deletions(-)

  and the performance testing results are encouraging.  Nevertheless we
  need to keep an eye on potential regressions, since this potentially
  affects every SMP workload in existence.

  This work comes from Yuyang Du.

  Other changes:

   - SCHED_DL updates.  (Andrea Parri)

   - Simplify architecture callbacks by removing finish_arch_switch().
     (Peter Zijlstra et al)

   - cputime accounting: guarantee stime + utime == rtime.  (Peter
     Zijlstra)

   - optimize idle CPU wakeups some more - inspired by Facebook server
     loads.  (Mike Galbraith)

   - stop_machine fixes and updates.  (Oleg Nesterov)

   - Introduce the 'trace_sched_waking' tracepoint.  (Peter Zijlstra)

   - sched/numa tweaks.  (Srikar Dronamraju)

   - misc fixes and small cleanups"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
  sched/deadline: Fix comment in enqueue_task_dl()
  sched/deadline: Fix comment in push_dl_tasks()
  sched: Change the sched_class::set_cpus_allowed() calling context
  sched: Make sched_class::set_cpus_allowed() unconditional
  sched: Fix a race between __kthread_bind() and sched_setaffinity()
  sched: Ensure a task has a non-normalized vruntime when returning back to CFS
  sched/numa: Fix NUMA_DIRECT topology identification
  tile: Reorganize _switch_to()
  sched, sparc32: Update scheduler comments in copy_thread()
  sched: Remove finish_arch_switch()
  sched, tile: Remove finish_arch_switch
  sched, sh: Fold finish_arch_switch() into switch_to()
  sched, score: Remove finish_arch_switch()
  sched, avr32: Remove finish_arch_switch()
  sched, MIPS: Get rid of finish_arch_switch()
  sched, arm: Remove finish_arch_switch()
  sched/fair: Clean up load average references
  sched/fair: Provide runnable_load_avg back to cfs_rq
  sched/fair: Remove task and group entity load when they are dead
  sched/fair: Init cfs_rq's sched_entity load average
  ...
2015-08-31 20:26:22 -07:00
Linus Torvalds 7073bc6612 Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
 "The main RCU changes in this cycle are:

   - the combination of tree geometry-initialization simplifications and
     OS-jitter-reduction changes to expedited grace periods.  These two
     are stacked due to the large number of conflicts that would
     otherwise result.

   - privatize smp_mb__after_unlock_lock().

     This commit moves the definition of smp_mb__after_unlock_lock() to
     kernel/rcu/tree.h, in recognition of the fact that RCU is the only
     thing using this, that nothing else is likely to use it, and that
     it is likely to go away completely.

   - documentation updates.

   - torture-test updates.

   - misc fixes"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
  rcu,locking: Privatize smp_mb__after_unlock_lock()
  rcu: Silence lockdep false positive for expedited grace periods
  rcu: Don't disable CPU hotplug during OOM notifiers
  scripts: Make checkpatch.pl warn on expedited RCU grace periods
  rcu: Update MAINTAINERS entry
  rcu: Clarify CONFIG_RCU_EQS_DEBUG help text
  rcu: Fix backwards RCU_LOCKDEP_WARN() in synchronize_rcu_tasks()
  rcu: Rename rcu_lockdep_assert() to RCU_LOCKDEP_WARN()
  rcu: Make rcu_is_watching() really notrace
  cpu: Wait for RCU grace periods concurrently
  rcu: Create a synchronize_rcu_mult()
  rcu: Fix obsolete priority-boosting comment
  rcu: Use WRITE_ONCE in RCU_INIT_POINTER
  rcu: Hide RCU_NOCB_CPU behind RCU_EXPERT
  rcu: Add RCU-sched flavors of get-state and cond-sync
  rcu: Add fastpath bypassing funnel locking
  rcu: Rename RCU_GP_DONE_FQS to RCU_GP_DOING_FQS
  rcu: Pull out wait_event*() condition into helper function
  documentation: Describe new expedited stall warnings
  rcu: Add stall warnings to synchronize_sched_expedited()
  ...
2015-08-31 18:12:07 -07:00
Pratyush Anand 051ac3848a net: sunrpc: fix tracepoint Warning: unknown op '->'
`perf stat  -e sunrpc:svc_xprt_do_enqueue true` results in

Warning: unknown op '->'
Warning: [sunrpc:svc_xprt_do_enqueue] unknown op '->'

Similar warning for svc_handle_xprt as well.

Actually TP_printk() should never dereference an address saved in the ring
buffer that points somewhere in the kernel. There's no guarantee that that
object still exists (with the exception of static strings).

Therefore change all the arguments for TP_printk(), so that it references
values existing in the ring buffer only.

While doing that, also fix another possible bug when argument xprt could be
NULL and TP_fast_assign() tries to access it's elements.

Signed-off-by: Pratyush Anand <panand@redhat.com>
Reviewed-by: Jeff Layton <jeff.layton@primarydata.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: stable@vger.kernel.org
Fixes: 83a712e0af "sunrpc: add some tracepoints around ..."
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-08-31 16:32:15 -04:00
David Ahern f0fa6e529e net: Add tos to validate source tracepoint
TOS is another key aspect of the lookup passed to fib_validate_source.
Add it to the tracepoint.

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31 12:42:04 -07:00
Sasha Levin f0a5157803 tracing: Don't make assumptions about length of string on task rename
While the dest comm string size is assured to be at least TASK_COMM_LEN long,
doing a memcpy() also adds the assumption that the source is at least that
long as well, which isn't assured, and isn't true in cases such as:

	set_task_comm(worker->task, "kworker/dying");

This leads to accessing invalid memory.

Link: http://lkml.kernel.org/r/1440760018-1557-1-git-send-email-sasha.levin@oracle.com

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-08-31 10:47:14 -04:00
David Ahern f6d3c19274 net: FIB tracepoints
A few useful tracepoints developing VRF driver.

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29 13:05:16 -07:00
Tejun Heo 5634cc2aa9 writeback: update writeback tracepoints to report cgroup
The following tracepoints are updated to report the cgroup used during
cgroup writeback.

* writeback_write_inode[_start]
* writeback_queue
* writeback_exec
* writeback_start
* writeback_written
* writeback_wait
* writeback_nowork
* writeback_wake_background
* wbc_writepage
* writeback_queue_io
* bdi_dirty_ratelimit
* balance_dirty_pages
* writeback_sb_inodes_requeue
* writeback_single_inode[_start]

Note that writeback_bdi_register is separated out from writeback_class
as reporting cgroup doesn't make sense to it.  Tracepoints which take
bdi are updated to take bdi_writeback instead.

Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-18 15:49:15 -07:00
Lars-Peter Clausen 6e588a0d83 ASoC: dapm: Consolidate path trace events
The snd_soc_dapm_input_path and snd_soc_dapm_output_path trace events are
identical except for the direction. Instead of having two events have a
single one that has a field that contains the direction.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-13 12:40:16 +01:00
Ankit Gupta a9fce37481 spmi: add command tracepoints for SPMI
Add tracepoints to retrieve information about read, write
and non-data commands. For performance measurement support
tracepoints are added at the beginning and at the end of
transfers. Following is a list showing the new tracepoint
events. The "cmd" parameter here represents the opcode, SID,
and full 16-bit address.

spmi_write_begin: cmd and data buffer.
spmi_write_end  : cmd and return value.
spmi_read_begin : cmd.
spmi_read_end   : cmd, return value and data buffer.
spmi_cmd        : cmd.

The reason that cmd appears at both the beginning and at
the end event is that SPMI drivers can request commands
concurrently. cmd helps in matching the corresponding
events.

SPMI tracepoints can be enabled like:

echo 1 >/sys/kernel/debug/tracing/events/spmi/enable

and will dump messages that can be viewed in
/sys/kernel/debug/tracing/trace that look like:

... spmi_read_begin: opc=56 sid=00 addr=0x0000
... spmi_read_end: opc=56 sid=00 addr=0x0000 ret=0 len=02 buf=0x[01-40]
... spmi_write_begin: opc=48 sid=00 addr=0x0000 len=3 buf=0x[ff-ff-ff]

Suggested-by: Sagar Dharia <sdharia@codeaurora.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Gilad Avidov <gavidov@codeaurora.org>
Signed-off-by: Ankit Gupta <ankgupta@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-05 12:27:09 -07:00
Jaegeuk Kim 84bc926c07 f2fs: check the largest extent at look-up time
Because of the extent shrinker or other -ENOMEM scenarios, it cannot guarantee
that the largest extent would be cached in the tree all the time.

Instead of relying on extent_tree, we can simply check the cached one in extent
tree accordingly.

Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-08-04 14:09:56 -07:00
Sascha Hauer 17e8351a77 thermal: consistently use int for temperatures
The thermal code uses int, long and unsigned long for temperatures
in different places.

Using an unsigned type limits the thermal framework to positive
temperatures without need. Also several drivers currently will report
temperatures near UINT_MAX for temperatures below 0°C. This will probably
immediately shut the machine down due to overtemperature if started below
0°C.

'long' is 64bit on several architectures. This is not needed since INT_MAX °mC
is above the melting point of all known materials.

Consistently use a plain 'int' for temperatures throughout the thermal code and
the drivers. This only changes the places in the drivers where the temperature
is passed around as pointer, when drivers internally use another type this is
not changed.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Peter Feuerer <peter@piie.net>
Cc: Punit Agrawal <punit.agrawal@arm.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Peter Feuerer <peter@piie.net>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: linux-acpi@vger.kernel.org
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-omap@vger.kernel.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: lm-sensors@lm-sensors.org
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-08-03 23:15:50 +08:00
Peter Zijlstra fbd705a0c6 sched: Introduce the 'trace_sched_waking' tracepoint
Mathieu reported that since 317f394160 ("sched: Move the second half
of ttwu() to the remote cpu") trace_sched_wakeup() can happen out of
context of the waker.

This is a problem when you want to analyse wakeup paths because it is
now very hard to correlate the wakeup event to whoever issued the
wakeup.

OTOH trace_sched_wakeup() is issued at the point where we set
p->state = TASK_RUNNING, which is right were we hand the task off to
the scheduler, so this is an important point when looking at
scheduling behaviour, up to here its been the wakeup path everything
hereafter is due to scheduler policy.

To bridge this gap, introduce a second tracepoint: trace_sched_waking.
It is guaranteed to be called in the waker context.

Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Francis Giraldeau <francis.giraldeau@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150609091336.GQ3644@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-03 12:21:22 +02:00
Jan Kara c290ea01ab fs: Remove ext3 filesystem driver
The functionality of ext3 is fully supported by ext4 driver. Major
distributions (SUSE, RedHat) already use ext4 driver to handle ext3
filesystems for quite some time. There is some ugliness in mm resulting
from jbd cleaning buffers in a dirty page without cleaning page dirty
bit and also support for buffer bouncing in the block layer when stable
pages are required is there only because of jbd. So let's remove the
ext3 driver. This saves us some 28k lines of duplicated code.

Acked-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
2015-07-23 20:59:40 +02:00
Paul E. McKenney 4f525a528b rcu: Apply rcu_seq operations to _rcu_barrier()
The rcu_seq operations were open-coded in _rcu_barrier(), so this commit
replaces the open-coding with the shiny new rcu_seq operations.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-07-17 14:58:57 -07:00
Philipp Zabel 2091f5181c [media] videobuf2: add trace events
Add videobuf2 specific vb2_qbuf and vb2_dqbuf trace events that mirror the
v4l2_qbuf and v4l2_dqbuf trace events, only they include additional
information about queue fill state and are emitted right before the buffer
is enqueued in the driver or userspace is woken up. This allows to make
sense of the timeline of trace events in combination with others that might
be triggered by __enqueue_in_driver.

Also two new trace events vb2_buf_queue and vb2_buf_done are added,
allowing to trace the handover between videobuf2 framework and driver.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17 12:04:12 -03:00
Philipp Zabel 85efe4e508 [media] v4l2-dev: use event class to deduplicate v4l2 trace events
Trace events with exactly the same parameters and trace output, such as
v4l2_qbuf and v4l2_dqbuf, are supposed to use the DECLARE_EVENT_CLASS and
DEFINE_EVENT macros instead of duplicated TRACE_EVENT macro calls.

Suggested-by: Steven Rostedt <rostedt@goodmis.org>

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-07-17 11:58:15 -03:00
Linus Torvalds 043cd04950 Merge branch 'for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs updates from Chris Mason:
 "Outside of our usual batch of fixes, this integrates the subvolume
  quota updates that Qu Wenruo from Fujitsu has been working on for a
  few releases now.  He gets an extra gold star for making btrfs smaller
  this time, and fixing a number of quota corners in the process.

  Dave Sterba tested and integrated Anand Jain's sysfs improvements.
  Outside of exporting a symbol (ack'd by Greg) these are all internal
  to btrfs and it's mostly cleanups and fixes.  Anand also attached some
  of our sysfs objects to our internal device management structs instead
  of an object off the super block.  It will make device management
  easier overall and it's a better fit for how the sysfs files are used.
  None of the existing sysfs files are moved around.

  Thanks for all the fixes everyone"

* 'for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (87 commits)
  btrfs: delayed-ref: double free in btrfs_add_delayed_tree_ref()
  Btrfs: Check if kobject is initialized before put
  lib: export symbol kobject_move()
  Btrfs: sysfs: add support to show replacing target in the sysfs
  Btrfs: free the stale device
  Btrfs: use received_uuid of parent during send
  Btrfs: fix use-after-free in btrfs_replay_log
  btrfs: wait for delayed iputs on no space
  btrfs: qgroup: Make snapshot accounting work with new extent-oriented qgroup.
  btrfs: qgroup: Add the ability to skip given qgroup for old/new_roots.
  btrfs: ulist: Add ulist_del() function.
  btrfs: qgroup: Cleanup the old ref_node-oriented mechanism.
  btrfs: qgroup: Switch self test to extent-oriented qgroup mechanism.
  btrfs: qgroup: Switch to new extent-oriented qgroup mechanism.
  btrfs: qgroup: Switch rescan to new mechanism.
  btrfs: qgroup: Add new qgroup calculation function btrfs_qgroup_account_extents().
  btrfs: backref: Add special time_seq == (u64)-1 case for btrfs_find_all_roots().
  btrfs: qgroup: Add new function to record old_roots.
  btrfs: qgroup: Record possible quota-related extent for qgroup.
  btrfs: qgroup: Add function qgroup_update_counters().
  ...
2015-06-30 20:07:45 -07:00
Linus Torvalds e382608254 This patch series contains several clean ups and even a new trace clock
"monitonic raw". Also some enhancements to make the ring buffer even
 faster. But the biggest and most noticeable change is the renaming of
 the ftrace* files, structures and variables that have to deal with
 trace events.
 
 Over the years I've had several developers tell me about their confusion
 with what ftrace is compared to events. Technically, "ftrace" is the
 infrastructure to do the function hooks, which include tracing and also
 helps with live kernel patching. But the trace events are a separate
 entity altogether, and the files that affect the trace events should
 not be named "ftrace". These include:
 
   include/trace/ftrace.h	->	include/trace/trace_events.h
   include/linux/ftrace_event.h	->	include/linux/trace_events.h
 
 Also, functions that are specific for trace events have also been renamed:
 
   ftrace_print_*()		->	trace_print_*()
   (un)register_ftrace_event()	->	(un)register_trace_event()
   ftrace_event_name()		->	trace_event_name()
   ftrace_trigger_soft_disabled()->	trace_trigger_soft_disabled()
   ftrace_define_fields_##call() ->	trace_define_fields_##call()
   ftrace_get_offsets_##call()	->	trace_get_offsets_##call()
 
 Structures have been renamed:
 
   ftrace_event_file		->	trace_event_file
   ftrace_event_{call,class}	->	trace_event_{call,class}
   ftrace_event_buffer		->	trace_event_buffer
   ftrace_subsystem_dir		->	trace_subsystem_dir
   ftrace_event_raw_##call	->	trace_event_raw_##call
   ftrace_event_data_offset_##call->	trace_event_data_offset_##call
   ftrace_event_type_funcs_##call ->	trace_event_type_funcs_##call
 
 And a few various variables and flags have also been updated.
 
 This has been sitting in linux-next for some time, and I have not heard
 a single complaint about this rename breaking anything. Mostly because
 these functions, variables and structures are mostly internal to the
 tracing system and are seldom (if ever) used by anything external to that.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJViYhVAAoJEEjnJuOKh9ldcJ0IAI+mytwoMAN/CWDE8pXrTrgs
 aHlcr1zorSzZ0Lq6lKsWP+V0VGVhP8KWO16vl35HaM5ZB9U+cDzWiGobI8JTHi/3
 eeTAPTjQdgrr/L+ZO1ApzS1jYPhN3Xi5L7xublcYMJjKfzU+bcYXg/x8gRt0QbG3
 S9QN/kBt0JIIjT7McN64m5JVk2OiU36LxXxwHgCqJvVCPHUrriAdIX7Z5KRpEv13
 zxgCN4d7Jiec/FsMW8dkO0vRlVAvudZWLL7oDmdsvNhnLy8nE79UOeHos2c1qifQ
 LV4DeQ+2Hlu7w9wxixHuoOgNXDUEiQPJXzPc/CuCahiTL9N/urQSGQDoOVMltR4=
 =hkdz
 -----END PGP SIGNATURE-----

Merge tag 'trace-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:
 "This patch series contains several clean ups and even a new trace
  clock "monitonic raw".  Also some enhancements to make the ring buffer
  even faster.  But the biggest and most noticeable change is the
  renaming of the ftrace* files, structures and variables that have to
  deal with trace events.

  Over the years I've had several developers tell me about their
  confusion with what ftrace is compared to events.  Technically,
  "ftrace" is the infrastructure to do the function hooks, which include
  tracing and also helps with live kernel patching.  But the trace
  events are a separate entity altogether, and the files that affect the
  trace events should not be named "ftrace".  These include:

    include/trace/ftrace.h         ->    include/trace/trace_events.h
    include/linux/ftrace_event.h   ->    include/linux/trace_events.h

  Also, functions that are specific for trace events have also been renamed:

    ftrace_print_*()               ->    trace_print_*()
    (un)register_ftrace_event()    ->    (un)register_trace_event()
    ftrace_event_name()            ->    trace_event_name()
    ftrace_trigger_soft_disabled() ->    trace_trigger_soft_disabled()
    ftrace_define_fields_##call()  ->    trace_define_fields_##call()
    ftrace_get_offsets_##call()    ->    trace_get_offsets_##call()

  Structures have been renamed:

    ftrace_event_file              ->    trace_event_file
    ftrace_event_{call,class}      ->    trace_event_{call,class}
    ftrace_event_buffer            ->    trace_event_buffer
    ftrace_subsystem_dir           ->    trace_subsystem_dir
    ftrace_event_raw_##call        ->    trace_event_raw_##call
    ftrace_event_data_offset_##call->    trace_event_data_offset_##call
    ftrace_event_type_funcs_##call ->    trace_event_type_funcs_##call

  And a few various variables and flags have also been updated.

  This has been sitting in linux-next for some time, and I have not
  heard a single complaint about this rename breaking anything.  Mostly
  because these functions, variables and structures are mostly internal
  to the tracing system and are seldom (if ever) used by anything
  external to that"

* tag 'trace-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits)
  ring_buffer: Allow to exit the ring buffer benchmark immediately
  ring-buffer-benchmark: Fix the wrong type
  ring-buffer-benchmark: Fix the wrong param in module_param
  ring-buffer: Add enum names for the context levels
  ring-buffer: Remove useless unused tracing_off_permanent()
  ring-buffer: Give NMIs a chance to lock the reader_lock
  ring-buffer: Add trace_recursive checks to ring_buffer_write()
  ring-buffer: Allways do the trace_recursive checks
  ring-buffer: Move recursive check to per_cpu descriptor
  ring-buffer: Add unlikelys to make fast path the default
  tracing: Rename ftrace_get_offsets_##call() to trace_event_get_offsets_##call()
  tracing: Rename ftrace_define_fields_##call() to trace_event_define_fields_##call()
  tracing: Rename ftrace_event_type_funcs_##call to trace_event_type_funcs_##call
  tracing: Rename ftrace_data_offset_##call to trace_event_data_offset_##call
  tracing: Rename ftrace_raw_##call event structures to trace_event_raw_##call
  tracing: Rename ftrace_trigger_soft_disabled() to trace_trigger_soft_disabled()
  tracing: Rename FTRACE_EVENT_FL_* flags to EVENT_FILE_FL_*
  tracing: Rename struct ftrace_subsystem_dir to trace_subsystem_dir
  tracing: Rename ftrace_event_name() to trace_event_name()
  tracing: Rename FTRACE_MAX_EVENT to TRACE_EVENT_TYPE_MAX
  ...
2015-06-26 14:02:43 -07:00
Linus Torvalds 5b4ca44477 media updates for v4.2-rc1
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVi+2qAAoJEAhfPr2O5OEVJdUP/2JzjQ17fswt4JCqXZRMjSZi
 ZZThdFY5Cirs4lKovigTsBwoFFf0nZ5ti+8MpbrglKUBRQTOwWXP/KrJt4hCCikD
 nkcEPkATqlhCYNqxI/6TgUgvVODmTO6PtLbWYpnW64zi9zq0FM4Ko1h+s8ynB91O
 UeDXbn00G2ifMo9BXuzyms+uW7f1LI0+Fqhwf3t9QrO8DTjjEU5Km9teUPMrJmgn
 rcfCrj4c3uDX4Wh4xe1DEs6T7Cf6qRKG5BLjwm6uNO3RMsZ5sA6tgCdE6FonhGrF
 Kvso2NCLQggZg6mgvMXoazYmaqxeeXsy06GBkmrQ9Xx6jo5z+nyJAWwVn7awdt7R
 89CWWn9MRrjhG3QLiluacJaH/5Z+fULSe6Stg2AVqfQGy/EwE7N2BR1CqO0i4pbN
 PredVtT77wyuDfUg6cYgJNjhhCcSt2i71X5Wt42rCZMylTGg3vWq//RqLo7xReaz
 XC0uhrJRDnF02BMzwQftUa8+UTn8Ozb7OyV91DzmZq9njsVHLAyY5u5Q/Fye5buH
 4Ejcjou3edVPMKu7aBtOt4Bmnwc03jBLTlMTdBMeHQugaj3aTP7G7EcX2UAGq4SK
 2e5GaYyIaAvpiddhBJzSzzd8u+XtRynKtFvfWnR+wTnILC+w+nfM/PbthVlXNJZx
 4sUv1XmWxbJT3T7wJ8xE
 =iJ/U
 -----END PGP SIGNATURE-----

Merge tag 'media/v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - Lots of improvements at the DVB API DocBook documentation.  Now, the
   frontend and the network APIs are fully in sync with the Kernel and
   looks more like the rest of the media documentation;

 - New frontend driver: cx24120

 - New driver for a PCI device: cobalt.  This driver is actually not
   sold in the market, but it is a good example of a multi-HDMI input
   device;

 - The dt3155 driver were promoted from staging;

 - The mantis driver got remote controller support;

 - New V4L2 driver for ST bdisp SoC chipsets;

 - Make sparse and smatch happier: several bugs were solved by fixing
   the issues reported by those static code analyzers.

 - Lots of new device additions, new features, improvements and cleanups
   at the existing drivers.

* tag 'media/v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (553 commits)
  [media] lmedm04: fix the range for relative measurements
  [media] lmedm04: use u32 instead of u64 for relative stats
  [media] omap3isp: remove unused var
  [media] saa7134: fix page size on some archs
  [media] use CONFIG_PM_SLEEP for suspend/resume
  [media] tuner-i2c: be consistent with I2C declaration
  [media] si470x: cleanup define namespace
  [media] bdisp: prevent compiling on random arch
  [media] vb2: Don't WARN when v4l2_buffer.bytesused is 0 for multiplanar buffers
  [media] MAINTAINERS: Add entry for the Renesas VSP1 driver
  [media] videodev2.h: fix copy-and-paste error in V4L2_MAP_XFER_FUNC_DEFAULT
  [media] Revert "[media] vb2: Push mmap_sem down to memops"
  [media] mantis: cleanup a warning
  [media] bdisp-debug: don't try to divide by s64
  [media] cx88: don't declare restart_video_queue if not used
  [media] au0828: move dev->boards atribuition to happen earlier
  [media] lmedm04: implement dvb v5 statistics
  [media] bdisp: remove unused var
  [media] bdisp: remove needless check
  ts2020: fix compilation on i386
  ...
2015-06-25 17:55:48 -07:00
Linus Torvalds 0db9723cac Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal management updates from Zhang Rui:
 "Specifics:

   - enhance Thermal Framework with several new capabilities:

       * use power estimates
       * compute weights with relative integers instead of percentages
       * allow governors to have private data in thermal zones
       * export thermal zone parameters through sysfs

     Thanks to the ARM thermal team (Javi, Punit, KP).

   - introduce a new thermal governor: power allocator.  First in kernel
     closed loop PI(D) controller for thermal control.  Thanks to ARM
     thermal team.

   - enhance OF thermal to allow thermal zones to have sustainable power
     HW specification.  Thanks to Punit.

   - introduce thermal driver for Intel Quark SoC x1000platform.  Thanks
     to Ong, Boon Leong.

   - introduce QPNP PMIC temperature alarm driver.  Thanks to Ivan T. I.

   - introduce thermal driver for Hisilicon hi6220.  Thanks to
     kongxinwei.

   - enhance Exynos thermal driver to handle Exynos5433 TMU.  Thanks to
     Chanwoo C.

   - TI thermal driver now has a better implementation for EOCZ bit.
     From Pavel M.

   - add id for Skylake processors in int340x processor thermal driver.

   - a couple of small fixes and cleanups."

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (36 commits)
  thermal: hisilicon: add new hisilicon thermal sensor driver
  dt-bindings: Document the hi6220 thermal sensor bindings
  thermal: of-thermal: add support for reading coefficients property
  thermal: support slope and offset coefficients
  thermal: power_allocator: round the division when divvying up power
  thermal: exynos: Add the support for Exynos5433 TMU
  thermal: cpu_cooling: Fix power calculation when CPUs are offline
  thermal: cpu_cooling: Remove cpu_dev update on policy CPU update
  thermal: export thermal_zone_parameters to sysfs
  thermal: cpu_cooling: Check memory allocation of power_table
  ti-soc-thermal: request temperature periodically if hw can't do that itself
  ti-soc-thermal: implement eocz bit to make driver useful on omap3
  cleanup ti-soc-thermal
  thermal: remove stale THERMAL_POWER_ACTOR select
  thermal: Default OF created trip points to writable
  thermal: core: Add Kconfig option to enable writable trips
  thermal: x86_pkg_temp: drop const for thermal_zone_parameters
  of: thermal: Introduce sustainable power for a thermal zone
  thermal: add trace events to the power allocator governor
  thermal: introduce the Power Allocator governor
  ...
2015-06-25 17:51:55 -07:00
Linus Torvalds e4bc13adfd Merge branch 'for-4.2/writeback' of git://git.kernel.dk/linux-block
Pull cgroup writeback support from Jens Axboe:
 "This is the big pull request for adding cgroup writeback support.

  This code has been in development for a long time, and it has been
  simmering in for-next for a good chunk of this cycle too.  This is one
  of those problems that has been talked about for at least half a
  decade, finally there's a solution and code to go with it.

  Also see last weeks writeup on LWN:

        http://lwn.net/Articles/648292/"

* 'for-4.2/writeback' of git://git.kernel.dk/linux-block: (85 commits)
  writeback, blkio: add documentation for cgroup writeback support
  vfs, writeback: replace FS_CGROUP_WRITEBACK with SB_I_CGROUPWB
  writeback: do foreign inode detection iff cgroup writeback is enabled
  v9fs: fix error handling in v9fs_session_init()
  bdi: fix wrong error return value in cgwb_create()
  buffer: remove unusued 'ret' variable
  writeback: disassociate inodes from dying bdi_writebacks
  writeback: implement foreign cgroup inode bdi_writeback switching
  writeback: add lockdep annotation to inode_to_wb()
  writeback: use unlocked_inode_to_wb transaction in inode_congested()
  writeback: implement unlocked_inode_to_wb transaction and use it for stat updates
  writeback: implement [locked_]inode_to_wb_and_lock_list()
  writeback: implement foreign cgroup inode detection
  writeback: make writeback_control track the inode being written back
  writeback: relocate wb[_try]_get(), wb_put(), inode_{attach|detach}_wb()
  mm: vmscan: disable memcg direct reclaim stalling if cgroup writeback support is in use
  writeback: implement memcg writeback domain based throttling
  writeback: reset wb_domain->dirty_limit[_tstmp] when memcg domain size changes
  writeback: implement memcg wb_domain
  writeback: update wb_over_bg_thresh() to use wb_domain aware operations
  ...
2015-06-25 16:00:17 -07:00
Linus Torvalds d857da7b70 A very large number of cleanups and bug fixes --- in particular for
the ext4 encryption patches, which is a new feature added in the last
 merge window.  Also fix a number of long-standing xfstest failures.
 (Quota writes failing due to ENOSPC, a race between truncate and
 writepage in data=journalled mode that was causing generic/068 to
 fail, and other corner cases.)
 
 Also add support for FALLOC_FL_INSERT_RANGE, and improve jbd2
 performance eliminating locking when a buffer is modified more than
 once during a transaction (which is very common for allocation
 bitmaps, for example), in which case the state of the journalled
 buffer head doesn't need to change.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABCAAGBQJVi3PeAAoJEPL5WVaVDYGj+I0H/jRPexvyvnGfxiqs1sxIlbSk
 cwewFJSsuKsy/pGYdmHvozWZyWGGORc89NrxoNwdbG+axvHbgUWt/3+vF+rzmaek
 vX4v9QvCEo4PfpRgzbnYJFhbxGMJtwci887sq1o/UoNXikFYT2kz8rpdf0++eO5W
 /GJNRA5ZUY0L0eeloUILAMrBr7KjtkI2oXwOZt5q68jh7B3n3XdNQXyEiQS/28aK
 QYcFrqA/e2Fiuk6l5OSGBCP38mySu+x0nBTLT5LFwwrUBnoZvGtdjM6Sj/yADDDn
 uP/Zpq56aLzkFRwwItrDaF26BIf2MhIH/WUYs65CraEGxjMaiPuzAudGA/iUVL8=
 =1BdR
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
 "A very large number of cleanups and bug fixes --- in particular for
  the ext4 encryption patches, which is a new feature added in the last
  merge window.  Also fix a number of long-standing xfstest failures.
  (Quota writes failing due to ENOSPC, a race between truncate and
  writepage in data=journalled mode that was causing generic/068 to
  fail, and other corner cases.)

  Also add support for FALLOC_FL_INSERT_RANGE, and improve jbd2
  performance eliminating locking when a buffer is modified more than
  once during a transaction (which is very common for allocation
  bitmaps, for example), in which case the state of the journalled
  buffer head doesn't need to change"

[ I renamed "ext4_follow_link()" to "ext4_encrypted_follow_link()" in
  the merge resolution, to make it clear that that function is _only_
  used for encrypted symlinks.  The function doesn't actually work for
  non-encrypted symlinks at all, and they use the generic helpers
                                         - Linus ]

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (52 commits)
  ext4: set lazytime on remount if MS_LAZYTIME is set by mount
  ext4: only call ext4_truncate when size <= isize
  ext4: make online defrag error reporting consistent
  ext4: minor cleanup of ext4_da_reserve_space()
  ext4: don't retry file block mapping on bigalloc fs with non-extent file
  ext4: prevent ext4_quota_write() from failing due to ENOSPC
  ext4: call sync_blockdev() before invalidate_bdev() in put_super()
  jbd2: speedup jbd2_journal_dirty_metadata()
  jbd2: get rid of open coded allocation retry loop
  ext4: improve warning directory handling messages
  jbd2: fix ocfs2 corrupt when updating journal superblock fails
  ext4: mballoc: avoid 20-argument function call
  ext4: wait for existing dio workers in ext4_alloc_file_blocks()
  ext4: recalculate journal credits as inode depth changes
  jbd2: use GFP_NOFS in jbd2_cleanup_journal_tail()
  ext4: use swap() in mext_page_double_lock()
  ext4: use swap() in memswap()
  ext4: fix race between truncate and __ext4_journalled_writepage()
  ext4 crypto: fail the mount if blocksize != pagesize
  ext4: Add support FALLOC_FL_INSERT_RANGE for fallocate
  ...
2015-06-25 14:06:55 -07:00
Linus Torvalds cfcc0ad47f Merge tag 'for-f2fs-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
 "New features:
   - per-file encryption (e.g., ext4)
   - FALLOC_FL_ZERO_RANGE
   - FALLOC_FL_COLLAPSE_RANGE
   - RENAME_WHITEOUT

  Major enhancement/fixes:
   - recovery broken superblocks
   - enhance f2fs_trim_fs with a discard_map
   - fix a race condition on dentry block allocation
   - fix a deadlock during summary operation
   - fix a missing fiemap result

  .. and many minor bug fixes and clean-ups were done"

* tag 'for-f2fs-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (83 commits)
  f2fs: do not trim preallocated blocks when truncating after i_size
  f2fs crypto: add alloc_bounce_page
  f2fs crypto: fix to handle errors likewise ext4
  f2fs: drop the volatile_write flag only
  f2fs: skip committing valid superblock
  f2fs: setting discard option in parse_options()
  f2fs: fix to return exact trimmed size
  f2fs: support FALLOC_FL_INSERT_RANGE
  f2fs: hide common code in f2fs_replace_block
  f2fs: disable the discard option when device doesn't support
  f2fs crypto: remove alloc_page for bounce_page
  f2fs: fix a deadlock for summary page lock vs. sentry_lock
  f2fs crypto: clean up error handling in f2fs_fname_setup_filename
  f2fs crypto: avoid f2fs_inherit_context for symlink
  f2fs crypto: do not set encryption policy for non-directory by ioctl
  f2fs crypto: allow setting encryption policy once
  f2fs crypto: check context consistent for rename2
  f2fs: avoid duplicated code by reusing f2fs_read_end_io
  f2fs crypto: use per-inode tfm structure
  f2fs: recovering broken superblock during mount
  ...
2015-06-24 20:38:29 -07:00
Linus Torvalds acd53127c4 SCSI misc on 20150622
This is the usual grab bag of driver updates (lpfc, hpsa,
 megaraid_sas, cxgbi, be2iscsi) plus an assortment of minor updates.
 There are also one new driver: the Cisco snic; the advansys driver has
 been rewritten to get rid of the warning about converting it to the
 DMA API, the tape statistics patch got in and finally, there's a
 resuffle of SCSI header files to separate more cleanly initiator from
 target mode (and better share the common definitions).
 
 Signed-off-by: James Bottomley <JBottomley@Odin.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABAgAGBQJViKWdAAoJEDeqqVYsXL0MAr8IAMmlA6HBVjMJJFCEOY9corHj
 e70MNQa7LUgf+JCdOtzGcvHXTiFFd4IHZAwXUJAnsC4IU2QWEfi1bjUTErlqBIGk
 LoZlXXpEHnFpmWot3OluOzzcGcxede8rVgPiKWVVdojIngBC2+LL/i2vPCJ84ri9
 WCVlk6KBvWZXuU6JuOKAb2FO9HOX7Q61wuKAMast2Qc6RNc2ksgc7VbstsITqzZ9
 FVEsjmQ5lqUj+xdxBpiUOdUpc22IJ4VcpBgQ2HrThvg6vf4aq937RJ/g4vi/g0SU
 Utk0a3bUw1H/WnYAfJVFx83nVEsS/954Z7/ERDg1sjlfLYwQtQnpov0XIbPIbZU=
 =k9IT
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This is the usual grab bag of driver updates (lpfc, hpsa,
  megaraid_sas, cxgbi, be2iscsi) plus an assortment of minor updates.

  There is also one new driver: the Cisco snic.  The advansys driver has
  been rewritten to get rid of the warning about converting it to the
  DMA API, the tape statistics patch got in and finally, there's a
  resuffle of SCSI header files to separate more cleanly initiator from
  target mode (and better share the common definitions)"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (156 commits)
  snic: driver for Cisco SCSI HBA
  qla2xxx: Fix indentation
  qla2xxx: Comment out unreachable code
  fusion: remove dead MTRR code
  advansys: fix compilation errors and warnings when CONFIG_PCI is not set
  mptsas: fix depth param in scsi_track_queue_full
  megaraid: fix irq setup process regression
  lpfc: Update version to 10.7.0.0 for upstream patch set.
  lpfc: Fix to drop PLOGIs from fabric node till LOGO processing completes
  lpfc: Fix scsi task management error message.
  lpfc: Fix cq_id masking problem.
  lpfc: Fix scsi prep dma buf error.
  lpfc: Add support for using block multi-queue
  lpfc: Devices are not discovered during takeaway/giveback testing
  lpfc: Fix vport deletion failure.
  lpfc: Check for active portpeerbeacon.
  lpfc: Update driver version for upstream patch set 10.6.0.1.
  lpfc: Change buffer pool empty message to miscellaneous category
  lpfc: Fix incorrect log message reported for empty FCF record.
  lpfc: Fix rport leak.
  ...
2015-06-23 15:55:44 -07:00
Linus Torvalds 43c9fad942 Power management and ACPI material for v4.2-rc1
- ACPICA update to upstream revision 20150515 including basic
    support for ACPI 6 features: new ACPI tables introduced by
    ACPI 6 (STAO, XENV, WPBT, NFIT, IORT), changes related to the
    other tables (DTRM, FADT, LPIT, MADT), new predefined names
    (_BTH, _CR3, _DSD, _LPI, _MTL, _PRR, _RDI, _RST, _TFP, _TSN),
    fixes and cleanups (Bob Moore, Lv Zheng).
 
  - ACPI device power management core code update to follow ACPI 6
    which reflects the ACPI device power management implementation
    in Windows (Rafael J Wysocki).
 
  - Rework of the backlight interface selection logic to reduce the
    number of kernel command line options and improve the handling
    of DMI quirks that may be involved in that and to make the
    code generally more straightforward (Hans de Goede).
 
  - Fixes for the ACPI Embedded Controller (EC) driver related to
    the handling of EC transactions (Lv Zheng).
 
  - Fix for a regression related to the ACPI resources management
    and resulting from a recent change of ACPI initialization code
    ordering (Rafael J Wysocki).
 
  - Fix for a system initialization regression related to ACPI
    introduced during the 3.14 cycle and caused by running the
    code that switches the platform over to the ACPI mode too
    early in the initialization sequence (Rafael J Wysocki).
 
  - Support for the ACPI _CCA device configuration object related
    to DMA cache coherence (Suravee Suthikulpanit).
 
  - ACPI/APEI fixes and cleanups (Jiri Kosina, Borislav Petkov).
 
  - ACPI battery driver cleanups (Luis Henriques, Mathias Krause).
 
  - ACPI processor driver cleanups (Hanjun Guo).
 
  - Cleanups and documentation update related to the ACPI device
    properties interface based on _DSD (Rafael J Wysocki).
 
  - ACPI device power management fixes (Rafael J Wysocki).
 
  - Assorted cleanups related to ACPI (Dominik Brodowski. Fabian
    Frederick, Lorenzo Pieralisi, Mathias Krause, Rafael J Wysocki).
 
  - Fix for a long-standing issue causing General Protection Faults
    to be generated occasionally on return to user space after resume
    from ACPI-based suspend-to-RAM on 32-bit x86 (Ingo Molnar).
 
  - Fix to make the suspend core code return -EBUSY consistently in
    all cases when system suspend is aborted due to wakeup detection
    (Ruchi Kandoi).
 
  - Support for automated device wakeup IRQ handling allowing drivers
    to make their PM support more starightforward (Tony Lindgren).
 
  - New tracepoints for suspend-to-idle tracing and rework of the
    prepare/complete callbacks tracing in the PM core (Todd E Brandt,
    Rafael J Wysocki).
 
  - Wakeup sources framework enhancements (Jin Qian).
 
  - New macro for noirq system PM callbacks (Grygorii Strashko).
 
  - Assorted cleanups related to system suspend (Rafael J Wysocki).
 
  - cpuidle core cleanups to make the code more efficient (Rafael J
    Wysocki).
 
  - powernv/pseries cpuidle driver update (Shilpasri G Bhat).
 
  - cpufreq core fixes related to CPU online/offline that should
    reduce the overhead of these operations quite a bit, unless the
    CPU in question is physically going away (Viresh Kumar, Saravana
    Kannan).
 
  - Serialization of cpufreq governor callbacks to avoid race
    conditions in some cases (Viresh Kumar).
 
  - intel_pstate driver fixes and cleanups (Doug Smythies, Prarit
    Bhargava, Joe Konno).
 
  - cpufreq driver (arm_big_little, cpufreq-dt, qoriq) updates (Sudeep
    Holla, Felipe Balbi, Tang Yuantian).
 
  - Assorted cleanups in cpufreq drivers and core (Shailendra Verma,
    Fabian Frederick, Wang Long).
 
  - New Device Tree bindings for representing Operating Performance
    Points (Viresh Kumar).
 
  - Updates for the common clock operations support code in the PM
    core (Rajendra Nayak, Geert Uytterhoeven).
 
  - PM domains core code update (Geert Uytterhoeven).
 
  - Intel Knights Landing support for the RAPL (Running Average Power
    Limit) power capping driver (Dasaratharaman Chandramouli).
 
  - Fixes related to the floor frequency setting on Atom SoCs in the
    RAPL power capping driver (Ajay Thomas).
 
  - Runtime PM framework documentation update (Ben Dooks).
 
  - cpupower tool fix (Herton R Krzesinski).
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJViJdWAAoJEILEb/54YlRx/9gP/3gHoFevNRycvn0VpKqdufCI
 Mxy2LBBLlfyW2uD3+NvqvA2WWSo0Cs/LgXa04eAVxPdU7k48s8w+54U23wSouzjW
 gfwAmuHxzDR8v0h8X3h6BxNzmkIQHtmDcQlA/cZdHejY/UUw01yxRGNUUZDNbxlm
 WXn2nmlBLmGqXTYq0fpBV+3jicUghJqHHsBCqa3VR2yQioHMJG01F4UZMqYTZunN
 OIvDUghxByKz6alzdCqlLl1Y0exV6vwWUAzBsl1qHqmHu/bWFSZn3ujNNVrjqHhw
 Kl7/8dC2pQkv3Zo3gEVvfQ0onotwWZxGHzPQRdvmxvRnBunQVCi/wynx90yABX/r
 PPb/iBNV0mZskbF0zb0GZT3ZZWGA8Z0p3o5JQv2jV4m62qTzx8w50Y5kbn9N1WT+
 5bre7AVbVAlGonWszcS9iE+6TOboRz9OD1CCwPFXHItFutlBkau+1hHfFoLM0o9n
 LhpGuyszT/EUa1BHkLzuCckFqO2DpbF3N2CKmuTekw0CdgdsvRL2pRByuerk3j7R
 WQhlcvBq5YH6j43AuoEZKp8r1iN8oG/iqlrMYQaYWrW9hJaoQOoU8dGJxp/e7gKN
 r/qeYjETI+tIsjCbtH5WQzzxDI3gPISAYAtfqs7G34EEo+Lwp6kyRUAF4kDot2V3
 ZIyuKMmTu4cdwDETr/O+
 =7jTj
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI updates from Rafael Wysocki:
 "The rework of backlight interface selection API from Hans de Goede
  stands out from the number of commits and the number of affected
  places perspective.  The cpufreq core fixes from Viresh Kumar are
  quite significant too as far as the number of commits goes and because
  they should reduce CPU online/offline overhead quite a bit in the
  majority of cases.

  From the new featues point of view, the ACPICA update (to upstream
  revision 20150515) adding support for new ACPI 6 material to ACPICA is
  the one that matters the most as some new significant features will be
  based on it going forward.  Also included is an update of the ACPI
  device power management core to follow ACPI 6 (which in turn reflects
  the Windows' device PM implementation), a PM core extension to support
  wakeup interrupts in a more generic way and support for the ACPI _CCA
  device configuration object.

  The rest is mostly fixes and cleanups all over and some documentation
  updates, including new DT bindings for Operating Performance Points.

  There is one fix for a regression introduced in the 4.1 cycle, but it
  adds quite a number of lines of code, it wasn't really ready before
  Thursday and you were on vacation, so I refrained from pushing it on
  the last minute for 4.1.

  Specifics:

   - ACPICA update to upstream revision 20150515 including basic support
     for ACPI 6 features: new ACPI tables introduced by ACPI 6 (STAO,
     XENV, WPBT, NFIT, IORT), changes related to the other tables (DTRM,
     FADT, LPIT, MADT), new predefined names (_BTH, _CR3, _DSD, _LPI,
     _MTL, _PRR, _RDI, _RST, _TFP, _TSN), fixes and cleanups (Bob Moore,
     Lv Zheng).

   - ACPI device power management core code update to follow ACPI 6
     which reflects the ACPI device power management implementation in
     Windows (Rafael J Wysocki).

   - rework of the backlight interface selection logic to reduce the
     number of kernel command line options and improve the handling of
     DMI quirks that may be involved in that and to make the code
     generally more straightforward (Hans de Goede).

   - fixes for the ACPI Embedded Controller (EC) driver related to the
     handling of EC transactions (Lv Zheng).

   - fix for a regression related to the ACPI resources management and
     resulting from a recent change of ACPI initialization code ordering
     (Rafael J Wysocki).

   - fix for a system initialization regression related to ACPI
     introduced during the 3.14 cycle and caused by running the code
     that switches the platform over to the ACPI mode too early in the
     initialization sequence (Rafael J Wysocki).

   - support for the ACPI _CCA device configuration object related to
     DMA cache coherence (Suravee Suthikulpanit).

   - ACPI/APEI fixes and cleanups (Jiri Kosina, Borislav Petkov).

   - ACPI battery driver cleanups (Luis Henriques, Mathias Krause).

   - ACPI processor driver cleanups (Hanjun Guo).

   - cleanups and documentation update related to the ACPI device
     properties interface based on _DSD (Rafael J Wysocki).

   - ACPI device power management fixes (Rafael J Wysocki).

   - assorted cleanups related to ACPI (Dominik Brodowski, Fabian
     Frederick, Lorenzo Pieralisi, Mathias Krause, Rafael J Wysocki).

   - fix for a long-standing issue causing General Protection Faults to
     be generated occasionally on return to user space after resume from
     ACPI-based suspend-to-RAM on 32-bit x86 (Ingo Molnar).

   - fix to make the suspend core code return -EBUSY consistently in all
     cases when system suspend is aborted due to wakeup detection (Ruchi
     Kandoi).

   - support for automated device wakeup IRQ handling allowing drivers
     to make their PM support more starightforward (Tony Lindgren).

   - new tracepoints for suspend-to-idle tracing and rework of the
     prepare/complete callbacks tracing in the PM core (Todd E Brandt,
     Rafael J Wysocki).

   - wakeup sources framework enhancements (Jin Qian).

   - new macro for noirq system PM callbacks (Grygorii Strashko).

   - assorted cleanups related to system suspend (Rafael J Wysocki).

   - cpuidle core cleanups to make the code more efficient (Rafael J
     Wysocki).

   - powernv/pseries cpuidle driver update (Shilpasri G Bhat).

   - cpufreq core fixes related to CPU online/offline that should reduce
     the overhead of these operations quite a bit, unless the CPU in
     question is physically going away (Viresh Kumar, Saravana Kannan).

   - serialization of cpufreq governor callbacks to avoid race
     conditions in some cases (Viresh Kumar).

   - intel_pstate driver fixes and cleanups (Doug Smythies, Prarit
     Bhargava, Joe Konno).

   - cpufreq driver (arm_big_little, cpufreq-dt, qoriq) updates (Sudeep
     Holla, Felipe Balbi, Tang Yuantian).

   - assorted cleanups in cpufreq drivers and core (Shailendra Verma,
     Fabian Frederick, Wang Long).

   - new Device Tree bindings for representing Operating Performance
     Points (Viresh Kumar).

   - updates for the common clock operations support code in the PM core
     (Rajendra Nayak, Geert Uytterhoeven).

   - PM domains core code update (Geert Uytterhoeven).

   - Intel Knights Landing support for the RAPL (Running Average Power
     Limit) power capping driver (Dasaratharaman Chandramouli).

   - fixes related to the floor frequency setting on Atom SoCs in the
     RAPL power capping driver (Ajay Thomas).

   - runtime PM framework documentation update (Ben Dooks).

   - cpupower tool fix (Herton R Krzesinski)"

* tag 'pm+acpi-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (194 commits)
  cpuidle: powernv/pseries: Auto-promotion of snooze to deeper idle state
  x86: Load __USER_DS into DS/ES after resume
  PM / OPP: Add binding for 'opp-suspend'
  PM / OPP: Allow multiple OPP tables to be passed via DT
  PM / OPP: Add new bindings to address shortcomings of existing bindings
  ACPI: Constify ACPI device IDs in documentation
  ACPI / enumeration: Document the rules regarding the PRP0001 device ID
  ACPI / video: Make acpi_video_unregister_backlight() private
  acpi-video-detect: Remove old API
  toshiba-acpi: Port to new backlight interface selection API
  thinkpad-acpi: Port to new backlight interface selection API
  sony-laptop: Port to new backlight interface selection API
  samsung-laptop: Port to new backlight interface selection API
  msi-wmi: Port to new backlight interface selection API
  msi-laptop: Port to new backlight interface selection API
  intel-oaktrail: Port to new backlight interface selection API
  ideapad-laptop: Port to new backlight interface selection API
  fujitsu-laptop: Port to new backlight interface selection API
  eeepc-laptop: Port to new backlight interface selection API
  dell-wmi: Port to new backlight interface selection API
  ...
2015-06-23 14:18:07 -07:00
Linus Torvalds 43224b96af Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
 "A rather largish update for everything time and timer related:

   - Cache footprint optimizations for both hrtimers and timer wheel

   - Lower the NOHZ impact on systems which have NOHZ or timer migration
     disabled at runtime.

   - Optimize run time overhead of hrtimer interrupt by making the clock
     offset updates smarter

   - hrtimer cleanups and removal of restrictions to tackle some
     problems in sched/perf

   - Some more leap second tweaks

   - Another round of changes addressing the 2038 problem

   - First step to change the internals of clock event devices by
     introducing the necessary infrastructure

   - Allow constant folding for usecs/msecs_to_jiffies()

   - The usual pile of clockevent/clocksource driver updates

  The hrtimer changes contain updates to sched, perf and x86 as they
  depend on them plus changes all over the tree to cleanup API changes
  and redundant code, which got copied all over the place.  The y2038
  changes touch s390 to remove the last non 2038 safe code related to
  boot/persistant clock"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
  clocksource: Increase dependencies of timer-stm32 to limit build wreckage
  timer: Minimize nohz off overhead
  timer: Reduce timer migration overhead if disabled
  timer: Stats: Simplify the flags handling
  timer: Replace timer base by a cpu index
  timer: Use hlist for the timer wheel hash buckets
  timer: Remove FIFO "guarantee"
  timers: Sanitize catchup_timer_jiffies() usage
  hrtimer: Allow hrtimer::function() to free the timer
  seqcount: Introduce raw_write_seqcount_barrier()
  seqcount: Rename write_seqcount_barrier()
  hrtimer: Fix hrtimer_is_queued() hole
  hrtimer: Remove HRTIMER_STATE_MIGRATE
  selftest: Timers: Avoid signal deadlock in leap-a-day
  timekeeping: Copy the shadow-timekeeper over the real timekeeper last
  clockevents: Check state instead of mode in suspend/resume path
  selftests: timers: Add leap-second timer edge testing to leap-a-day.c
  ntp: Do leapsecond adjustment in adjtimex read path
  time: Prevent early expiry of hrtimers[CLOCK_REALTIME] at the leap second edge
  ntp: Introduce and use SECS_PER_DAY macro instead of 86400
  ...
2015-06-22 18:57:44 -07:00
Linus Torvalds 23b7776290 Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
 "The main changes are:

   - lockless wakeup support for futexes and IPC message queues
     (Davidlohr Bueso, Peter Zijlstra)

   - Replace spinlocks with atomics in thread_group_cputimer(), to
     improve scalability (Jason Low)

   - NUMA balancing improvements (Rik van Riel)

   - SCHED_DEADLINE improvements (Wanpeng Li)

   - clean up and reorganize preemption helpers (Frederic Weisbecker)

   - decouple page fault disabling machinery from the preemption
     counter, to improve debuggability and robustness (David
     Hildenbrand)

   - SCHED_DEADLINE documentation updates (Luca Abeni)

   - topology CPU masks cleanups (Bartosz Golaszewski)

   - /proc/sched_debug improvements (Srikar Dronamraju)"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (79 commits)
  sched/deadline: Remove needless parameter in dl_runtime_exceeded()
  sched: Remove superfluous resetting of the p->dl_throttled flag
  sched/deadline: Drop duplicate init_sched_dl_class() declaration
  sched/deadline: Reduce rq lock contention by eliminating locking of non-feasible target
  sched/deadline: Make init_sched_dl_class() __init
  sched/deadline: Optimize pull_dl_task()
  sched/preempt: Add static_key() to preempt_notifiers
  sched/preempt: Fix preempt notifiers documentation about hlist_del() within unsafe iteration
  sched/stop_machine: Fix deadlock between multiple stop_two_cpus()
  sched/debug: Add sum_sleep_runtime to /proc/<pid>/sched
  sched/debug: Replace vruntime with wait_sum in /proc/sched_debug
  sched/debug: Properly format runnable tasks in /proc/sched_debug
  sched/numa: Only consider less busy nodes as numa balancing destinations
  Revert 095bebf61a ("sched/numa: Do not move past the balance point if unbalanced")
  sched/fair: Prevent throttling in early pick_next_task_fair()
  preempt: Reorganize the notrace definitions a bit
  preempt: Use preempt_schedule_context() as the official tracing preemption point
  sched: Make preempt_schedule_context() function-tracing safe
  x86: Remove cpu_sibling_mask() and cpu_core_mask()
  x86: Replace cpu_**_mask() with topology_**_cpumask()
  ...
2015-06-22 15:52:04 -07:00
Eric Whitney c27e43a10c ext4: minor cleanup of ext4_da_reserve_space()
Remove outdated comments and dead code from ext4_da_reserve_space.
Clean up its trace point, and relocate it to make it more useful.

While we're at it, fix a nearby conditional used to determine if
we have a non-bigalloc file system.  It doesn't match usage elsewhere
in the code, and misleadingly suggests that an s_cluster_ratio value
of 0 would be legal.

Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-06-21 21:37:05 -04:00
Thomas Gleixner 0eeda71bc3 timer: Replace timer base by a cpu index
Instead of storing a pointer to the per cpu tvec_base we can simply
cache a CPU index in the timer_list and use that to get hold of the
correct per cpu tvec_base. This is only used in lock_timer_base() and
the slightly larger code is peanuts versus the spinlock operation and
the d-cache foot print of the timer wheel.

Aside of that this allows to get rid of following nuisances:

 - boot_tvec_base

   That statically allocated 4k bss data is just kept around so the
   timer has a home when it gets statically initialized. It serves no
   other purpose.

   With the CPU index we assign the timer to CPU0 at static
   initialization time and therefor can avoid the whole boot_tvec_base
   dance.  That also simplifies the init code, which just can use the
   per cpu base.

   Before:
     text	   data	    bss	    dec	    hex	filename
    17491	   9201	   4160	  30852	   7884	../build/kernel/time/timer.o
   After:
     text	   data	    bss	    dec	    hex	filename
    17440	   9193	      0	  26633	   6809	../build/kernel/time/timer.o

 - Overloading the base pointer with various flags

   The CPU index has enough space to hold the flags (deferrable,
   irqsafe) so we can get rid of the extra masking and bit fiddling
   with the base pointer.

As a benefit we reduce the size of struct timer_list on 64 bit
machines. 4 - 8 bytes, a size reduction up to 15% per struct timer_list,
which is a real win as we have tons of them embedded in other structs.

This changes also the newly added deferrable printout of the timer
start trace point to capture and print all timer->flags, which allows
us to decode the target cpu of the timer as well.

We might have used bitfields for this, but that would change the
static initializers and the init function for no value to accomodate
big endian bitfields.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Joonwoo Park <joonwoop@codeaurora.org>
Cc: Wenbo Wang <wenbo.wang@memblaze.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Badhri Jagan Sridharan <Badhri@google.com>
Link: http://lkml.kernel.org/r/20150526224511.950084301@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-19 15:18:27 +02:00
Rafael J. Wysocki 8ced6789da Merge branch 'pm-cpufreq'
* pm-cpufreq: (37 commits)
  cpufreq: dt: allow driver to boot automatically
  intel_pstate: Fix overflow in busy_scaled due to long delay
  cpufreq: qoriq: optimize the CPU frequency switching time
  cpufreq: gx-suspmod: Fix two typos in two comments
  cpufreq: nforce2: Fix typo in comment to function nforce2_init()
  cpufreq: governor: Serialize governor callbacks
  cpufreq: governor: split cpufreq_governor_dbs()
  cpufreq: governor: register notifier from cs_init()
  cpufreq: Remove cpufreq_update_policy()
  cpufreq: Restart governor as soon as possible
  cpufreq: Call cpufreq_policy_put_kobj() from cpufreq_policy_free()
  cpufreq: Initialize policy->kobj while allocating policy
  cpufreq: Stop migrating sysfs files on hotplug
  cpufreq: Don't allow updating inactive policies from sysfs
  intel_pstate: Force setting target pstate when required
  intel_pstate: change some inconsistent debug information
  cpufreq: Track cpu managing sysfs kobjects separately
  cpufreq: Fix for typos in two comments
  cpufreq: Mark policy->governor = NULL for inactive policies
  cpufreq: Manage governor usage history with 'policy->last_governor'
  ...
2015-06-19 01:17:50 +02:00
Qu Wenruo e69bcee376 btrfs: qgroup: Cleanup the old ref_node-oriented mechanism.
Goodbye, the old mechanisim.

Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-06-10 09:26:11 -07:00
Namjae Jeon 331573febb ext4: Add support FALLOC_FL_INSERT_RANGE for fallocate
This patch implements fallocate's FALLOC_FL_INSERT_RANGE for Ext4.

1) Make sure that both offset and len are block size aligned.
2) Update the i_size of inode by len bytes.
3) Compute the file's logical block number against offset. If the computed
   block number is not the starting block of the extent, split the extent
   such that the block number is the starting block of the extent.
4) Shift all the extents which are lying between [offset, last allocated extent]
   towards right by len bytes. This step will make a hole of len bytes
   at offset.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
2015-06-09 01:55:03 -04:00
Linus Torvalds 8a7deb362b Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block layer fixes from Jens Axboe:
 "Sending this off now, as I'm not aware of other current bugs, nor do I
  expect further fixes before 4.1 final.  This contains two fixes:

   - a fix for a bdi unregister warning that gets spewed on md, due to a
     regression introduced earlier in this cycle.  From Neil Brown.

   - a fix for a compile warning for NVMe on 32-bit platforms, also a
     regression introduced in this cycle.  From Arnd Bergmann"

* 'for-linus' of git://git.kernel.dk/linux-block:
  NVMe: fix type warning on 32-bit
  block: discard bdi_unregister() in favour of bdi_destroy()
2015-06-03 16:35:00 -07:00
Bart Van Assche ba92999252 target: Minimize SCSI header #include directives
Only include SCSI initiator header files in target code that needs
these header files, namely the SCSI pass-through code and the tcm_loop
driver. Change SCSI_SENSE_BUFFERSIZE into TRANSPORT_SENSE_BUFFER in
target code because the former is intended for initiator code and the
latter for target code. With this patch the only initiator include
directives in target code that remain are as follows:

$ git grep -nHE 'include .scsi/(scsi.h|scsi_host.h|scsi_device.h|scsi_cmnd.h)' drivers/target drivers/infiniband/ulp/{isert,srpt} drivers/usb/gadget/legacy/tcm_*.[ch] drivers/{vhost,xen} include/{target,trace/events/target.h}
drivers/target/loopback/tcm_loop.c:29:#include <scsi/scsi.h>
drivers/target/loopback/tcm_loop.c:31:#include <scsi/scsi_host.h>
drivers/target/loopback/tcm_loop.c:32:#include <scsi/scsi_device.h>
drivers/target/loopback/tcm_loop.c:33:#include <scsi/scsi_cmnd.h>
drivers/target/target_core_pscsi.c:39:#include <scsi/scsi_device.h>
drivers/target/target_core_pscsi.c:40:#include <scsi/scsi_host.h>
drivers/xen/xen-scsiback.c:52:#include <scsi/scsi_host.h> /* SG_ALL */

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-06-02 08:03:25 -07:00
Tejun Heo dcc25ae76e writeback: move global_dirty_limit into wb_domain
This patch is a part of the series to define wb_domain which
represents a domain that wb's (bdi_writeback's) belong to and are
measured against each other in.  This will enable IO backpressure
propagation for cgroup writeback.

global_dirty_limit exists to regulate the global dirty threshold which
is a property of the wb_domain.  This patch moves hard_dirty_limit,
dirty_lock, and update_time into wb_domain.

This is pure reorganization and doesn't introduce any behavioral
changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-02 08:38:12 -06:00
Tejun Heo a88a341a73 writeback: move bandwidth related fields from backing_dev_info into bdi_writeback
Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback)
and the role of the separation is unclear.  For cgroup support for
writeback IOs, a bdi will be updated to host multiple wb's where each
wb serves writeback IOs of a different cgroup on the bdi.  To achieve
that, a wb should carry all states necessary for servicing writeback
IOs for a cgroup independently.

This patch moves bandwidth related fields from backing_dev_info into
bdi_writeback.

* The moved fields are: bw_time_stamp, dirtied_stamp, written_stamp,
  write_bandwidth, avg_write_bandwidth, dirty_ratelimit,
  balanced_dirty_ratelimit, completions and dirty_exceeded.

* writeback_chunk_size() and over_bground_thresh() now take @wb
  instead of @bdi.

* bdi_writeout_fraction(bdi, ...)	-> wb_writeout_fraction(wb, ...)
  bdi_dirty_limit(bdi, ...)		-> wb_dirty_limit(wb, ...)
  bdi_position_ration(bdi, ...)		-> wb_position_ratio(wb, ...)
  bdi_update_writebandwidth(bdi, ...)	-> wb_update_write_bandwidth(wb, ...)
  [__]bdi_update_bandwidth(bdi, ...)	-> [__]wb_update_bandwidth(wb, ...)
  bdi_{max|min}_pause(bdi, ...)		-> wb_{max|min}_pause(wb, ...)
  bdi_dirty_limits(bdi, ...)		-> wb_dirty_limits(wb, ...)

* Init/exits of the relocated fields are moved to bdi_wb_init/exit()
  respectively.  Note that explicit zeroing is dropped in the process
  as wb's are cleared in entirety anyway.

* As there's still only one bdi_writeback per backing_dev_info, all
  uses of bdi->stat[] are mechanically replaced with bdi->wb.stat[]
  introducing no behavior changes.

v2: Typo in description fixed as suggested by Jan.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-02 08:33:34 -06:00
Ingo Molnar f407a82586 Merge branch 'linus' into sched/core, to resolve conflict
Conflicts:
	arch/sparc/include/asm/topology_64.h

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-02 08:05:42 +02:00
Shreyas B. Prabhu 649b8de2f7 tracing/mm: don't trace mm_page_pcpu_drain on offline cpus
Since tracepoints use RCU for protection, they must not be called on
offline cpus.  trace_mm_page_pcpu_drain can be called on an offline cpu
in this scenario caught by LOCKDEP:

     ===============================
     [ INFO: suspicious RCU usage. ]
     4.1.0-rc1+ #9 Not tainted
     -------------------------------
     include/trace/events/kmem.h:265 suspicious rcu_dereference_check() usage!

    other info that might help us debug this:

    RCU used illegally from offline CPU!
    rcu_scheduler_active = 1, debug_locks = 1
     1 lock held by swapper/5/0:
      #0:  (&(&zone->lock)->rlock){..-...}, at: [<c0000000002073b0>] .free_pcppages_bulk+0x70/0x920

    stack backtrace:
     CPU: 5 PID: 0 Comm: swapper/5 Not tainted 4.1.0-rc1+ #9
     Call Trace:
       .dump_stack+0x98/0xd4 (unreliable)
       .lockdep_rcu_suspicious+0x108/0x170
       .free_pcppages_bulk+0x60c/0x920
       .free_hot_cold_page+0x208/0x280
       .destroy_context+0x90/0xd0
       .__mmdrop+0x58/0x160
       .idle_task_exit+0xf0/0x100
       .pnv_smp_cpu_kill_self+0x58/0x2c0
       .cpu_die+0x34/0x50
       .arch_cpu_idle_dead+0x20/0x40
       .cpu_startup_entry+0x708/0x7a0
       .start_secondary+0x36c/0x3a0
       start_secondary_prolog+0x10/0x14

Fix this by converting mm_page_pcpu_drain trace point into
TRACE_EVENT_CONDITION where condition is cpu_online(smp_processor_id())

Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-05-28 18:25:18 -07:00
Shreyas B. Prabhu 1f0c27b50f tracing/mm: don't trace mm_page_free on offline cpus
Since tracepoints use RCU for protection, they must not be called on
offline cpus.  trace_mm_page_free can be called on an offline cpu in this
scenario caught by LOCKDEP:

     ===============================
     [ INFO: suspicious RCU usage. ]
     4.1.0-rc1+ #9 Not tainted
     -------------------------------
     include/trace/events/kmem.h:170 suspicious rcu_dereference_check() usage!

    other info that might help us debug this:

    RCU used illegally from offline CPU!
    rcu_scheduler_active = 1, debug_locks = 1
     no locks held by swapper/1/0.

    stack backtrace:
     CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.1.0-rc1+ #9
     Call Trace:
       .dump_stack+0x98/0xd4 (unreliable)
       .lockdep_rcu_suspicious+0x108/0x170
       .free_pages_prepare+0x494/0x680
       .free_hot_cold_page+0x50/0x280
       .destroy_context+0x90/0xd0
       .__mmdrop+0x58/0x160
       .idle_task_exit+0xf0/0x100
       .pnv_smp_cpu_kill_self+0x58/0x2c0
       .cpu_die+0x34/0x50
       .arch_cpu_idle_dead+0x20/0x40
       .cpu_startup_entry+0x708/0x7a0
       .start_secondary+0x36c/0x3a0
       start_secondary_prolog+0x10/0x14

Fix this by converting mm_page_free trace point into TRACE_EVENT_CONDITION
where condition is cpu_online(smp_processor_id())

Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-05-28 18:25:18 -07:00
Shreyas B. Prabhu e5feb1ebaa tracing/mm: don't trace kmem_cache_free on offline cpus
Since tracepoints use RCU for protection, they must not be called on
offline cpus.  trace_kmem_cache_free can be called on an offline cpu in
this scenario caught by LOCKDEP:

    ===============================
    [ INFO: suspicious RCU usage. ]
    4.1.0-rc1+ #9 Not tainted
    -------------------------------
    include/trace/events/kmem.h:148 suspicious rcu_dereference_check() usage!

    other info that might help us debug this:

    RCU used illegally from offline CPU!
    rcu_scheduler_active = 1, debug_locks = 1
    no locks held by swapper/1/0.

    stack backtrace:
    CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.1.0-rc1+ #9
    Call Trace:
      .dump_stack+0x98/0xd4 (unreliable)
      .lockdep_rcu_suspicious+0x108/0x170
      .kmem_cache_free+0x344/0x4b0
      .__mmdrop+0x4c/0x160
      .idle_task_exit+0xf0/0x100
      .pnv_smp_cpu_kill_self+0x58/0x2c0
      .cpu_die+0x34/0x50
      .arch_cpu_idle_dead+0x20/0x40
      .cpu_startup_entry+0x708/0x7a0
      .start_secondary+0x36c/0x3a0
      start_secondary_prolog+0x10/0x14

Fix this by converting kmem_cache_free trace point into
TRACE_EVENT_CONDITION where condition is cpu_online(smp_processor_id())

Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-05-28 18:25:18 -07:00
Jaegeuk Kim 003a3e1d60 f2fs: add f2fs_map_blocks
This patch introduces f2fs_map_blocks structure likewise ext4_map_blocks.
Now, f2fs uses f2fs_map_blocks when handling get_block.

Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-05-28 15:41:29 -07:00
NeilBrown aad653a0bc block: discard bdi_unregister() in favour of bdi_destroy()
bdi_unregister() now contains very little functionality.

It contains a "WARN_ON" if bdi->dev is NULL.  This warning is of no
real consequence as bdi->dev isn't needed by anything else in the function,
and it triggers if
   blk_cleanup_queue() -> bdi_destroy()
is called before bdi_unregister, which happens since
  Commit: 6cd18e711d ("block: destroy bdi before blockdev is unregistered.")

So this isn't wanted.

It also calls bdi_set_min_ratio().  This needs to be called after
writes through the bdi have all been flushed, and before the bdi is destroyed.
Calling it early is better than calling it late as it frees up a global
resource.

Calling it immediately after bdi_wb_shutdown() in bdi_destroy()
perfectly fits these requirements.

So bdi_unregister() can be discarded with the important content moved to
bdi_destroy(), as can the
  writeback_bdi_unregister
event which is already not used.

Reported-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org (v4.0)
Fixes: c4db59d31e ("fs: don't reassign dirty inodes to default_backing_dev_info")
Fixes: 6cd18e711d ("block: destroy bdi before blockdev is unregistered.")
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Nicholas Moulin <nicholas.w.moulin@linux.intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-28 10:12:42 -06:00
Badhri Jagan Sridharan 4e413e8526 tracing: timer: Add deferrable flag to timer_start
The timer_start event now shows whether the timer is
deferrable in case of a low-res timer. The debug_activate
function now includes a deferrable flag while calling
the trace_timer_start event.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
[jstultz: Fixed minor whitespace and grammer tweaks
 pointed out by Ingo]
Signed-off-by: John Stultz <john.stultz@linaro.org>
2015-05-22 10:36:06 -07:00
Peter Zijlstra 80ed87c8a9 sched/wait: Introduce TASK_NOLOAD and TASK_IDLE
Currently people use TASK_INTERRUPTIBLE to idle kthreads and wait for
'work' because TASK_UNINTERRUPTIBLE contributes to the loadavg. Having
all idle kthreads contribute to the loadavg is somewhat silly.

Now mostly this works OK, because kthreads have all their signals
masked. However there's a few sites where this is causing problems and
TASK_UNINTERRUPTIBLE should be used, except for that loadavg issue.

This patch adds TASK_NOLOAD which, when combined with
TASK_UNINTERRUPTIBLE avoids the loadavg accounting.

As most of imagined usage sites are loops where a thread wants to
idle, waiting for work, a helper TASK_IDLE is introduced.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Julian Anastasov <ja@ssi.bg>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: NeilBrown <neilb@suse.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-19 08:39:18 +02:00
Steven Rostedt (Red Hat) d0ee8f4a1f tracing: Rename ftrace_get_offsets_##call() to trace_event_get_offsets_##call()
The name "ftrace" really refers to the function hook infrastructure. It
is not about the trace_events. The function ftrace_get_offsets_##call()
is used to find the offset into dynamically allocated trace event fields
for printing. It has nothing to do with function tracing. Rename it.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-13 21:49:01 -04:00
Steven Rostedt (Red Hat) 33d0f35eea tracing: Rename ftrace_define_fields_##call() to trace_event_define_fields_##call()
The name "ftrace" really refers to the function hook infrastructure. It
is not about the trace_events. The function ftrace_define_fields_##call()
is used to define how to process the trace_event fields. It has nothing to
do with function tracing. Rename it.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-13 21:49:00 -04:00
Steven Rostedt (Red Hat) 3ad017bac9 tracing: Rename ftrace_event_type_funcs_##call to trace_event_type_funcs_##call
The name "ftrace" really refers to the function hook infrastructure. It
is not about the trace_events. The structure ftrace_event_type_funcs_##call
is used to define how the trace_events will be printed. It has nothing to
do with function tracing. Rename it.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-13 21:48:59 -04:00
Steven Rostedt (Red Hat) 62323a148f tracing: Rename ftrace_data_offset_##call to trace_event_data_offset_##call
The name "ftrace" really refers to the function hook infrastructure. It
is not about the trace_events. The structure ftrace_data_offset_##call is
used to find the offsets of dynamically allocated fields in trace_events.
It has nothing to do with function tracing. Rename it.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-13 21:48:58 -04:00
Steven Rostedt (Red Hat) a723776573 tracing: Rename ftrace_raw_##call event structures to trace_event_raw_##call
The name "ftrace" really refers to the function hook infrastructure. It
is not about the trace_events. The ftrace_raw_##call structures are built
by macros for trace events. They have nothing to do with function tracing.
Rename them.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-13 21:48:40 -04:00
Steven Rostedt (Red Hat) 09a5059aa1 tracing: Rename ftrace_trigger_soft_disabled() to trace_trigger_soft_disabled()
The name "ftrace" really refers to the function hook infrastructure. It
is not about the trace_events. The ftrace_trigger_soft_disabled() tests if a
trace_event is soft disabled (called but not traced), and returns true if
it is. It has nothing to do with function tracing and should be renamed.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-13 15:25:39 -04:00
Steven Rostedt (Red Hat) 5d6ad960a7 tracing: Rename FTRACE_EVENT_FL_* flags to EVENT_FILE_FL_*
The name "ftrace" really refers to the function hook infrastructure. It
is not about the trace_events. The FTRACE_EVENT_FL_* flags are flags to
do with the trace_event files in the tracefs directory. They are not related
to function tracing. Rename them to a more descriptive name.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-13 15:24:57 -04:00
Steven Rostedt (Red Hat) 892c505aac tracing: Rename ftrace_output functions to trace_output
The name "ftrace" really refers to the function hook infrastructure. It
is not about the trace_events. The ftrace_output_*() and ftrace_raw_output_*()
functions represent the trace_event code. Rename them to just trace_output
or trace_raw_output.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-13 14:06:41 -04:00
Steven Rostedt (Red Hat) 3f795dcfc7 tracing: Rename ftrace_event_buffer to trace_event_buffer.
The name "ftrace" really refers to the function hook infrastructure. It
is not about the trace_events. The ftrace_event_buffer functions and data
structures are for trace_events and not for function hooks. Rename them
to trace_event_buffer*.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-13 14:06:36 -04:00
Steven Rostedt (Red Hat) 2425bcb924 tracing: Rename ftrace_event_{call,class} to trace_event_{call,class}
The name "ftrace" really refers to the function hook infrastructure. It
is not about the trace_events. The structures ftrace_event_call and
ftrace_event_class have nothing to do with the function hooks, and are
really trace_event structures. Rename ftrace_event_* to trace_event_*.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-13 14:06:10 -04:00
Steven Rostedt (Red Hat) 7f1d2f8210 tracing: Rename ftrace_event_file to trace_event_file
The name "ftrace" really refers to the function hook infrastructure. It
is not about the trace_events. The structure ftrace_event_file is really
about trace events and not "ftrace". Rename it to trace_event_file.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-13 14:05:16 -04:00
Steven Rostedt (Red Hat) 9023c93090 tracing: Rename (un)register_ftrace_event() to (un)register_trace_event()
The name "ftrace" really refers to the function hook infrastructure. It
is not about the trace_events. The functions (un)register_ftrace_event() is
really about trace_events, and the name should be register_trace_event()
instead.

Also renamed ftrace_event_reg() to trace_event_reg() for the same reason.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-13 14:05:14 -04:00
Steven Rostedt (Red Hat) 645df987f7 tracing: Rename ftrace_print_*() functions ta trace_print_*()
The name "ftrace" really refers to the function hook infrastructure. It
is not about the trace_events. The functions ftrace_print_*() are not part of
the function infrastructure, and the names can be confusing. Rename them
to be trace_print_*().

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-13 14:05:13 -04:00
Steven Rostedt (Red Hat) af658dca22 tracing: Rename ftrace_event.h to trace_events.h
The term "ftrace" is really the infrastructure of the function hooks,
and not the trace events. Rename ftrace_event.h to trace_events.h to
represent the trace_event infrastructure and decouple the term ftrace
from it.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-13 14:05:12 -04:00
Steven Rostedt (Red Hat) ee53bbd172 tracing: Move the perf code out of trace_event.h
The trace_event.h file is for the generic trace event code. Move
the perf related code into its own trace header file perf.h

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-13 14:05:10 -04:00
Steven Rostedt (Red Hat) 2167ae7272 tracing: Rename trace/ftrace.h to trace/trace_events.h
The name "ftrace" really refers to the function hook infrastructure. It
is not about the TRACE_EVENT() macros. The file trace/ftrace.h was originally
written to be mostly focused toward the "ftrace" code (that in kernel/trace/)
but ended up being generic and used by perf and others.

Rename the file to be less confusing about what infrastructure it belongs to.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-05-13 14:05:05 -04:00
Peter Seiderer dc19924162 [media] videodev2: Add V4L2_BUF_FLAG_LAST
This v4l2_buffer flag can be used by drivers to mark a capture buffer
as the last generated buffer, for example after a V4L2_DEC_CMD_STOP
command was issued.

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-12 03:51:39 -03:00
Jaegeuk Kim 5d79988139 f2fs: export more enums for tracepoint
This patch exports newly added enums to userspace.

Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-05-07 11:38:31 -07:00
Javi Merino 6828a4711f thermal: add trace events to the power allocator governor
Add trace events for the power allocator governor and the power actor
interface of the cpu cooling device.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-05-04 21:27:52 -07:00
Doug Smythies 4055fad340 intel_pstate: Add tsc collection and keep previous target pstate
The intel_pstate driver is difficult to debug and investigate without tsc.

Also, it is likely use of tsc, and some version of C0 percentage,
will be re-introdcued in futute.

There have also been occasions where it is desirebale to know, and
confirm, the previous target pstate.

This patch brings back tsc, adds previous target pstate,
and adds both to the trace data collection.

Signed-off-by: Doug Smythies <dsmythies@telus.net>
Acked-by: Kristen Carlson Accardi <kristen@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-05 01:08:54 +02:00
Linus Torvalds 9ec3a646fe Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull fourth vfs update from Al Viro:
 "d_inode() annotations from David Howells (sat in for-next since before
  the beginning of merge window) + four assorted fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  RCU pathwalk breakage when running into a symlink overmounting something
  fix I_DIO_WAKEUP definition
  direct-io: only inc/dec inode->i_dio_count for file systems
  fs/9p: fix readdir()
  VFS: assorted d_backing_inode() annotations
  VFS: fs/inode.c helpers: d_inode() annotations
  VFS: fs/cachefiles: d_backing_inode() annotations
  VFS: fs library helpers: d_inode() annotations
  VFS: assorted weird filesystems: d_inode() annotations
  VFS: normal filesystems (and lustre): d_inode() annotations
  VFS: security/: d_inode() annotations
  VFS: security/: d_backing_inode() annotations
  VFS: net/: d_inode() annotations
  VFS: net/unix: d_backing_inode() annotations
  VFS: kernel/: d_inode() annotations
  VFS: audit: d_backing_inode() annotations
  VFS: Fix up some ->d_inode accesses in the chelsio driver
  VFS: Cachefiles should perform fs modifications on the top layer only
  VFS: AF_UNIX sockets should call mknod on the top layer only
2015-04-26 17:22:07 -07:00
Linus Torvalds e98bf5cedf The changes to the common clock framework for 4.0 are mostly new clock
drivers and updates to existing ones for feature enhancements and bug
 fixes. There is more churn than usual in the framework core due to the
 change to introduce per-user unique struct clk pointers in 4.0. This
 caused several regressions to surface, some of which were sent as fixes
 to 4.0. New generic clock drivers were added for GPIO- and PWM-based
 clock controllers. Additionally the common clk-divider code recieved
 several fixes to the way it rounds rates.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVNcIIAAoJEKI6nJvDJaTU3a8QAM+fjhDMY5xpI6VIbxZaA2aR
 VUofw9/rdAtP1UdwtlSKBvCqpwwqt/U7zlMWU9v+UvTjYdHIf9SIDQoJnd+uEtwL
 roz/kNeB7WOVyxwbTJ2B5fjvPSN+mq8Rm8ANDcL8ZOGxxtt2Mip1IWMAlx2XUnwG
 tYZhB7EfKzLHZRblOdn2Q4U/4T+KXOFTSO+Gb9o2J0I2sJLI0NRXhcl9Fcoo8KVz
 G0ACWa0F1WKsbqzBATnhtYiKkuC3BeiS2eMuTVTlkP+Gd6YQ2f1zWLeBfXEiPGZb
 q0p/qTrUFLHbRoJMMuWaUfaBxb8PeUfM6yllxrzvRxPJU25pbj8OW/O5ZAe9xP8G
 S17sQ2nhEoWZW9hqbuA39IcLGa6RjT+TD+z3kmXQ9ZvCVDN2Oqqb/4ZNViwAvQq7
 t67EfV7hGXty3Q58tS4XE9hHfwY+9YqMDLNIS/ED+hP8rcxTmiLlAIyk+qbT3b0l
 Q+375Ar7iCgihPPHYxeM5Qe1+Vsfh4NjR9thdAbT245MB3f90ULb+GNP/izUDOgA
 c/Ot6pStVFEUxTol6RlcLb85PugzrkoBOF/8ZLySdMLhALjPwaFcQZ1sFdcKUKlE
 tt7sZKQgbbCfqYGS9K264uUfWbdmZh05zhtkH0xUjyQpyIcnrYQsSIIEEnlbYnPp
 0D55nooSGROKeud+gyrx
 =2LMr
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clock framework updates from Michael Turquette:
 "The changes to the common clock framework for 4.0 are mostly new clock
  drivers and updates to existing ones for feature enhancements and bug
  fixes.

  There is more churn than usual in the framework core due to the change
  to introduce per-user unique struct clk pointers in 4.0.  This caused
  several regressions to surface, some of which were sent as fixes to
  4.0.  New generic clock drivers were added for GPIO- and PWM-based
  clock controllers.

  Additionally the common clk-divider code recieved several fixes to the
  way it rounds rates"

* tag 'clk-for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (91 commits)
  clk: check ->determine/round_rate() return value in clk_calc_new_rates
  clk: at91: usb: propagate rate modification to the parent clk
  clk: samsung: exynos4: Disable ARMCLK down feature on Exynos4210 SoC
  clk: don't use __initconst for non-const arrays
  clk: at91: change to using endian agnositc IO
  clk: clk-gpio-gate: Fix active low
  clk: Add PWM clock driver
  clk: Add clock driver for mb86s7x
  clk: pxa: pxa3xx: add missing os timer clock
  clk: tegra: Use the proper parent for plld_dsi
  clk: tegra: Use generic tegra_osc_clk_init() on Tegra114
  clk: tegra: Model oscillator as clock
  clk: tegra: Add peripheral registers for bank Y
  clk: tegra: Register the proper number of resets
  clk: tegra: Remove needless initializations
  clk: tegra: Use consistent indentation
  clk: tegra: Various whitespace cleanups
  clk: tegra: Enable HDA to HDMI clocks on Tegra124
  clk: tegra: Fix a bunch of sparse warnings
  clk: tegra: Fix typo tabel -> table
  ...
2015-04-21 09:24:09 -07:00
Linus Torvalds 96b90f27bc Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
 "This update has mostly fixes, but also other bits:

   - perf tooling fixes

   - PMU driver fixes

   - Intel Broadwell PMU driver HW-enablement for LBR callstacks

   - a late coming 'perf kmem' tool update that enables it to also
     analyze page allocation data.  Note, this comes with MM tracepoint
     changes that we believe to not break anything: because it changes
     the formerly opaque 'struct page *' field that uniquely identifies
     pages to 'pfn' which identifies pages uniquely too, but isn't as
     opaque and can be used for other purposes as well"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/pt: Fix and clean up error handling in pt_event_add()
  perf/x86/intel: Add Broadwell support for the LBR callstack
  perf/x86/intel/rapl: Fix energy counter measurements but supporing per domain energy units
  perf/x86/intel: Fix Core2,Atom,NHM,WSM cycles:pp events
  perf/x86: Fix hw_perf_event::flags collision
  perf probe: Fix segfault when probe with lazy_line to file
  perf probe: Find compilation directory path for lazy matching
  perf probe: Set retprobe flag when probe in address-based alternative mode
  perf kmem: Analyze page allocator events also
  tracing, mm: Record pfn instead of pointer to struct page
2015-04-18 11:26:46 -04:00
Linus Torvalds 06a60deca8 Merge tag 'for-f2fs-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
 "New features:
   - in-memory extent_cache
   - fs_shutdown to test power-off-recovery
   - use inline_data to store symlink path
   - show f2fs as a non-misc filesystem

  Major fixes:
   - avoid CPU stalls on sync_dirty_dir_inodes
   - fix some power-off-recovery procedure
   - fix handling of broken symlink correctly
   - fix missing dot and dotdot made by sudden power cuts
   - handle wrong data index during roll-forward recovery
   - preallocate data blocks for direct_io

  ... and a bunch of minor bug fixes and cleanups"

* tag 'for-f2fs-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (71 commits)
  f2fs: pass checkpoint reason on roll-forward recovery
  f2fs: avoid abnormal behavior on broken symlink
  f2fs: flush symlink path to avoid broken symlink after POR
  f2fs: change 0 to false for bool type
  f2fs: do not recover wrong data index
  f2fs: do not increase link count during recovery
  f2fs: assign parent's i_mode for empty dir
  f2fs: add F2FS_INLINE_DOTS to recover missing dot dentries
  f2fs: fix mismatching lock and unlock pages for roll-forward recovery
  f2fs: fix sparse warnings
  f2fs: limit b_size of mapped bh in f2fs_map_bh
  f2fs: persist system.advise into on-disk inode
  f2fs: avoid NULL pointer dereference in f2fs_xattr_advise_get
  f2fs: preallocate fallocated blocks for direct IO
  f2fs: enable inline data by default
  f2fs: preserve extent info for extent cache
  f2fs: initialize extent tree with on-disk extent info of inode
  f2fs: introduce __{find,grab}_extent_tree
  f2fs: split set_data_blkaddr from f2fs_update_extent_cache
  f2fs: enable fast symlink by utilizing inline data
  ...
2015-04-18 11:17:20 -04:00
Jaegeuk Kim 10027551cc f2fs: pass checkpoint reason on roll-forward recovery
This patch adds CP_RECOVERY to remain recovery information for checkpoint.
And, it makes sure writing checkpoint in this case.

Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-04-16 09:45:40 -07:00
Stefan Strogin 99e8ea6cd2 mm: cma: add trace events for CMA allocations and freeings
Add trace events for cma_alloc() and cma_release().

The cma_alloc tracepoint is used both for successful and failed allocations,
in case of allocation failure pfn=-1UL is stored and printed.

Signed-off-by: Stefan Strogin <stefan.strogin@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Nazarewicz <mpn@google.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 16:35:19 -07:00
David Howells 2b0143b5c9 VFS: normal filesystems (and lustre): d_inode() annotations
that's the bulk of filesystem drivers dealing with inodes of their own

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-15 15:06:57 -04:00
Linus Torvalds 1dcf58d6e6 Merge branch 'akpm' (patches from Andrew)
Merge first patchbomb from Andrew Morton:

 - arch/sh updates

 - ocfs2 updates

 - kernel/watchdog feature

 - about half of mm/

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (122 commits)
  Documentation: update arch list in the 'memtest' entry
  Kconfig: memtest: update number of test patterns up to 17
  arm: add support for memtest
  arm64: add support for memtest
  memtest: use phys_addr_t for physical addresses
  mm: move memtest under mm
  mm, hugetlb: abort __get_user_pages if current has been oom killed
  mm, mempool: do not allow atomic resizing
  memcg: print cgroup information when system panics due to panic_on_oom
  mm: numa: remove migrate_ratelimited
  mm: fold arch_randomize_brk into ARCH_HAS_ELF_RANDOMIZE
  mm: split ET_DYN ASLR from mmap ASLR
  s390: redefine randomize_et_dyn for ELF_ET_DYN_BASE
  mm: expose arch_mmap_rnd when available
  s390: standardize mmap_rnd() usage
  powerpc: standardize mmap_rnd() usage
  mips: extract logic for mmap_rnd()
  arm64: standardize mmap_rnd() usage
  x86: standardize mmap_rnd() usage
  arm: factor out mmap ASLR into mmap_rnd
  ...
2015-04-14 16:49:17 -07:00
Kirill A. Shutemov 9823336833 x86: expose number of page table levels on Kconfig level
We would want to use number of page table level to define mm_struct.
Let's expose it as CONFIG_PGTABLE_LEVELS.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14 16:49:02 -07:00
Linus Torvalds eeee78cf77 Some clean ups and small fixes, but the biggest change is the addition
of the TRACE_DEFINE_ENUM() macro that can be used by tracepoints.
 
 Tracepoints have helper functions for the TP_printk() called
 __print_symbolic() and __print_flags() that lets a numeric number be
 displayed as a a human comprehensible text. What is placed in the
 TP_printk() is also shown in the tracepoint format file such that
 user space tools like perf and trace-cmd can parse the binary data
 and express the values too. Unfortunately, the way the TRACE_EVENT()
 macro works, anything placed in the TP_printk() will be shown pretty
 much exactly as is. The problem arises when enums are used. That's
 because unlike macros, enums will not be changed into their values
 by the C pre-processor. Thus, the enum string is exported to the
 format file, and this makes it useless for user space tools.
 
 The TRACE_DEFINE_ENUM() solves this by converting the enum strings
 in the TP_printk() format into their number, and that is what is
 shown to user space. For example, the tracepoint tlb_flush currently
 has this in its format file:
 
      __print_symbolic(REC->reason,
         { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" },
         { TLB_REMOTE_SHOOTDOWN, "remote shootdown" },
         { TLB_LOCAL_SHOOTDOWN, "local shootdown" },
         { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" })
 
 After adding:
 
      TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH);
      TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN);
      TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN);
      TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN);
 
 Its format file will contain this:
 
      __print_symbolic(REC->reason,
         { 0, "flush on task switch" },
         { 1, "remote shootdown" },
         { 2, "local shootdown" },
         { 3, "local mm shootdown" })
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVLBTuAAoJEEjnJuOKh9ldjHMIALdRS755TXCZGOf0r7O2akOR
 wMPeum7C+ae1mH+jCsJKUC0/jUfQKaMt/UxoHlipDgcGg8kD2jtGnGCw4Xlwvdsr
 y4rFmcTRSl1mo0zDSsg6ujoupHlVYN0+JPjrd7S3cv/llJoY49zcanNLF7S2XLeM
 dZCtWRLWYpBiWO68ai6AqJTnE/eGFIqBI048qb5Eg8dbK243SSeSIf9Ywhb+VsA+
 aq6F7cWI/H6j4tbeza8tAN19dcwenDro5EfCDY8ARQHJu1f6Y3+DLf2imjkd6Aiu
 JVAoGIjHIpI+djwCZC1u4gi4urjfOqYartrM3Q54tb3YWYqHeNqP2ASI2a4EpYk=
 =Ixwt
 -----END PGP SIGNATURE-----

Merge tag 'trace-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:
 "Some clean ups and small fixes, but the biggest change is the addition
  of the TRACE_DEFINE_ENUM() macro that can be used by tracepoints.

  Tracepoints have helper functions for the TP_printk() called
  __print_symbolic() and __print_flags() that lets a numeric number be
  displayed as a a human comprehensible text.  What is placed in the
  TP_printk() is also shown in the tracepoint format file such that user
  space tools like perf and trace-cmd can parse the binary data and
  express the values too.  Unfortunately, the way the TRACE_EVENT()
  macro works, anything placed in the TP_printk() will be shown pretty
  much exactly as is.  The problem arises when enums are used.  That's
  because unlike macros, enums will not be changed into their values by
  the C pre-processor.  Thus, the enum string is exported to the format
  file, and this makes it useless for user space tools.

  The TRACE_DEFINE_ENUM() solves this by converting the enum strings in
  the TP_printk() format into their number, and that is what is shown to
  user space.  For example, the tracepoint tlb_flush currently has this
  in its format file:

     __print_symbolic(REC->reason,
        { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" },
        { TLB_REMOTE_SHOOTDOWN, "remote shootdown" },
        { TLB_LOCAL_SHOOTDOWN, "local shootdown" },
        { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" })

  After adding:

     TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH);
     TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN);
     TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN);
     TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN);

  Its format file will contain this:

     __print_symbolic(REC->reason,
        { 0, "flush on task switch" },
        { 1, "remote shootdown" },
        { 2, "local shootdown" },
        { 3, "local mm shootdown" })"

* tag 'trace-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (27 commits)
  tracing: Add enum_map file to show enums that have been mapped
  writeback: Export enums used by tracepoint to user space
  v4l: Export enums used by tracepoints to user space
  SUNRPC: Export enums in tracepoints to user space
  mm: tracing: Export enums in tracepoints to user space
  irq/tracing: Export enums in tracepoints to user space
  f2fs: Export the enums in the tracepoints to userspace
  net/9p/tracing: Export enums in tracepoints to userspace
  x86/tlb/trace: Export enums in used by tlb_flush tracepoint
  tracing/samples: Update the trace-event-sample.h with TRACE_DEFINE_ENUM()
  tracing: Allow for modules to convert their enums to values
  tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values
  tracing: Update trace-event-sample with TRACE_SYSTEM_VAR documentation
  tracing: Give system name a pointer
  brcmsmac: Move each system tracepoints to their own header
  iwlwifi: Move each system tracepoints to their own header
  mac80211: Move message tracepoints to their own header
  tracing: Add TRACE_SYSTEM_VAR to xhci-hcd
  tracing: Add TRACE_SYSTEM_VAR to kvm-s390
  tracing: Add TRACE_SYSTEM_VAR to intel-sst
  ...
2015-04-14 10:49:03 -07:00
Linus Torvalds a1480a166d Merge branch 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata updates from Tejun Heo:

 - Hannes's patchset implements support for better error reporting
   introduced by the new ATA command spec.

 - the deperecated pci_ dma API usages have been replaced by dma_ ones.

 - a bunch of hardware specific updates and some cleanups.

* 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ata: remove deprecated use of pci api
  ahci: st: st_configure_oob must be called after IP is clocked.
  ahci: st: Update the ahci_st DT documentation
  ahci: st: Update the DT example for how to obtain the PHY.
  sata_dwc_460ex: indent an if statement
  libata: Add tracepoints
  libata-eh: Set 'information' field for autosense
  libata: Implement support for sense data reporting
  libata: Implement NCQ autosense
  libata: use status bit definitions in ata_dump_status()
  ide,ata: Rename ATA_IDX to ATA_SENSE
  libata: whitespace fixes in ata_to_sense_error()
  libata: whitespace cleanup in ata_get_cmd_descript()
  libata: use READ_LOG_DMA_EXT
  libata: remove ATA_FLAG_LOWTAG
  sata_dwc_460ex: re-use hsdev->dev instead of dwc_dev
  sata_dwc_460ex: move to generic DMA driver
  sata_dwc_460ex: join messages back
  sata: xgene: add ACPI support for APM X-Gene SATA ports
  ata: sata_mv: add proper definitions for LP_PHY_CTL register values
2015-04-13 16:42:16 -07:00
Namhyung Kim 9fdd8a875c tracing, mm: Record pfn instead of pointer to struct page
The struct page is opaque for userspace tools, so it'd be better to save
pfn in order to identify page frames.

The textual output of $debugfs/tracing/trace file remains unchanged and
only raw (binary) data format is changed - but thanks to libtraceevent,
userspace tools which deal with the raw data (like perf and trace-cmd)
can parse the format easily.  So impact on the userspace will also be
minimal.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Based-on-patch-by: Joonsoo Kim <js1304@gmail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/1428298576-9785-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-04-13 11:44:52 -03:00
Jaegeuk Kim 8ce67cb07d f2fs: add some tracepoints to debug volatile and atomic writes
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-04-10 15:08:47 -07:00
Steven Rostedt (Red Hat) 91df6089aa writeback: Export enums used by tracepoint to user space
The enums used in tracepoints for __print_symbolic() do not have their
values shown in the tracepoint format files and this makes it difficult
for user space tools to convert the binary values to the strings they
are to represent.

Add TRACE_DEFINE_ENUM(x) macros to export the enum names to their values
to make the tracing output from user space tools more robust.

Link: http://lkml.kernel.org/r/20150403013802.220157513@goodmis.org

Cc: Dave Chinner <dchinner@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-04-08 10:58:35 -04:00
Steven Rostedt (Red Hat) 43d0f71f0e v4l: Export enums used by tracepoints to user space
Enums used by tracepoints for __print_symbolic() are shown in the
tracepoint format files with just their names and not their values.
This makes it difficult for user space tools to know how to convert the
binary data into their string representations.

By adding the use of TRACE_DEFINE_ENUM(), the enum names will be mapped
to their values and shown in the tracing file system to let tools
convert the data as necessary.

Link: http://lkml.kernel.org/r/20150403013802.220157513@goodmis.org

Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-04-08 10:58:25 -04:00
Steven Rostedt (Red Hat) 6ba16eefcd SUNRPC: Export enums in tracepoints to user space
The enums used in the tracepoints for __print_symbolic() have their
names shown in the tracepoint format files. User space tools do not know
how to convert those names into their values to be able to convert the
binary data.

Use TRACE_DEFINE_ENUM() to export the enum names to their values for
userspace to do the parsing correctly.

Link: http://lkml.kernel.org/r/20150403013802.220157513@goodmis.org

Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-04-08 09:41:08 -04:00
Steven Rostedt (Red Hat) 190f0b76ca mm: tracing: Export enums in tracepoints to user space
The enums used in tracepoints with __print_symbolic() have their
names shown in the tracepoint format files and not their values.
This makes it difficult for user space tools to convert the binary
data to the strings as user space does not know what those enums
are about.

By having them use TRACE_DEFINE_ENUM(), the names of the enums will
be mapped to the values and shown to user space.

Link: http://lkml.kernel.org/r/20150403013802.220157513@goodmis.org

Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-04-08 09:40:01 -04:00
Steven Rostedt (Red Hat) f0a91b3caa irq/tracing: Export enums in tracepoints to user space
The enums used by the softirq mapping is what is shown in the output
of the __print_symbolic() and not their values, that are needed
to map them to their strings. Export them to userspace with the
TRACE_DEFINE_ENUM() macro so that user space tools can map the enums
with their values.

Link: http://lkml.kernel.org/r/20150403013802.220157513@goodmis.org

Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-04-08 09:40:00 -04:00
Steven Rostedt (Red Hat) 5511b9a471 f2fs: Export the enums in the tracepoints to userspace
The tracepoints that use __print_symbolic() use enums as the value
to convert to strings. Unfortunately, the format files for these
tracepoints show the enum name and not their value. This causes some
userspace tools not to know how to convert __print_symbolic() to
their strings.

Add TRACE_DEFINE_ENUM() macros to export the enums used to userspace
to let those tools know what those enum values are.

Link: http://lkml.kernel.org/r/20150403013802.220157513@goodmis.org

Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Pankaj Kumar <pankaj.km@samsung.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-04-08 09:40:00 -04:00
Steven Rostedt (Red Hat) 56e1b22608 net/9p/tracing: Export enums in tracepoints to userspace
The tracepoints in the 9p code use a lot of enums for the __print_symbolic()
function. These enums are shown in the tracepoint format files, and user
space tools such as trace-cmd does not have the information to parse it.
Add helper macros to export the enums with TRACE_DEFINE_ENUM().

Link: http://lkml.kernel.org/r/20150403013802.220157513@goodmis.org

Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-04-08 09:39:59 -04:00
Steven Rostedt (Red Hat) 23b9766261 x86/tlb/trace: Export enums in used by tlb_flush tracepoint
Have the enums used in __print_symbolic() by the trace_tlb_flush()
tracepoint exported to userpace such that they can be parsed by
userspace tools.

Link: http://lkml.kernel.org/r/20150403013802.220157513@goodmis.org

Cc: Dave Hansen <dave@sr71.net>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-04-08 09:39:58 -04:00
Steven Rostedt (Red Hat) 0c564a538a tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values
Several tracepoints use the helper functions __print_symbolic() or
__print_flags() and pass in enums that do the mapping between the
binary data stored and the value to print. This works well for reading
the ASCII trace files, but when the data is read via userspace tools
such as perf and trace-cmd, the conversion of the binary value to a
human string format is lost if an enum is used, as userspace does not
have access to what the ENUM is.

For example, the tracepoint trace_tlb_flush() has:

 __print_symbolic(REC->reason,
    { TLB_FLUSH_ON_TASK_SWITCH, "flush on task switch" },
    { TLB_REMOTE_SHOOTDOWN, "remote shootdown" },
    { TLB_LOCAL_SHOOTDOWN, "local shootdown" },
    { TLB_LOCAL_MM_SHOOTDOWN, "local mm shootdown" })

Which maps the enum values to the strings they represent. But perf and
trace-cmd do no know what value TLB_LOCAL_MM_SHOOTDOWN is, and would
not be able to map it.

With TRACE_DEFINE_ENUM(), developers can place these in the event header
files and ftrace will convert the enums to their values:

By adding:

 TRACE_DEFINE_ENUM(TLB_FLUSH_ON_TASK_SWITCH);
 TRACE_DEFINE_ENUM(TLB_REMOTE_SHOOTDOWN);
 TRACE_DEFINE_ENUM(TLB_LOCAL_SHOOTDOWN);
 TRACE_DEFINE_ENUM(TLB_LOCAL_MM_SHOOTDOWN);

 $ cat /sys/kernel/debug/tracing/events/tlb/tlb_flush/format
[...]
 __print_symbolic(REC->reason,
    { 0, "flush on task switch" },
    { 1, "remote shootdown" },
    { 2, "local shootdown" },
    { 3, "local mm shootdown" })

The above is what userspace expects to see, and tools do not need to
be modified to parse them.

Link: http://lkml.kernel.org/r/20150403013802.220157513@goodmis.org

Cc: Guilherme Cox <cox@computer.org>
Cc: Tony Luck <tony.luck@gmail.com>
Cc: Xie XiuQi <xiexiuqi@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-04-08 09:39:56 -04:00
Steven Rostedt (Red Hat) acd388fd3a tracing: Give system name a pointer
Normally the compiler will use the same pointer for a string throughout
the file. But there's no guarantee of that happening. Later changes will
require that all events have the same pointer to the system string.

Name the system string and have all events point to it.

Testing this, it did not increases the size of the text, except for the
notes section, which should not harm the real size any.

Link: http://lkml.kernel.org/r/20150403013802.220157513@goodmis.org

Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-04-08 09:39:55 -04:00
Steven Rostedt (Red Hat) 882156e040 tracing: Add TRACE_SYSTEM_VAR to intel-sst
New code will require TRACE_SYSTEM to be a valid C variable name,
but some tracepoints have TRACE_SYSTEM with '-' and not '_', so
it can not be used. Instead, add a TRACE_SYSTEM_VAR that can
give the tracing infrastructure a unique name for the trace system.

Link: http://lkml.kernel.org/r/20150402142831.GT6023@sirena.org.uk

Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-04-07 12:31:12 -04:00
Hannes Reinecke 255c03d15a libata: Add tracepoints
Add some tracepoints for ata_qc_issue, ata_qc_complete, and
ata_eh_link_autopsy.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-27 11:59:22 -04:00
Scott Wood bbedb17994 tracing: %pF is only for function pointers
Use %pS for actual addresses, otherwise you'll get bad output
on arches like ppc64 where %pF expects a function descriptor.

Link: http://lkml.kernel.org/r/1426130037-17956-22-git-send-email-scottwood@freescale.com

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-03-25 08:57:22 -04:00
Steven Rostedt f58078daca regmap: Move tracing header into drivers/base/regmap
The tracing events for regmap are confined to the regmap subsystem. It
also requires accessing an internal header. Instead of including the
internal header from a generic file location, move the tracing file
into the regmap directory.

Also rename the regmap tracing header to trace.h, as it is redundant to
keep the regmap.h name when it is in the regmap directory.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-19 22:22:45 +00:00
Philipp Zabel c6b570d97c regmap: introduce regmap_name to fix syscon regmap trace events
This patch fixes a NULL pointer dereference when enabling regmap event
tracing in the presence of a syscon regmap, introduced by commit bdb0066df9
("mfd: syscon: Decouple syscon interface from platform devices").
That patch introduced syscon regmaps that have their dev field set to NULL.
The regmap trace events expect it to point to a valid struct device and feed
it to dev_name():

  $ echo 1 > /sys/kernel/debug/tracing/events/regmap/enable

  Unable to handle kernel NULL pointer dereference at virtual address 0000002c
  pgd = 80004000
  [0000002c] *pgd=00000000
  Internal error: Oops: 17 [#1] SMP ARM
  Modules linked in: coda videobuf2_vmalloc
  CPU: 0 PID: 304 Comm: kworker/0:2 Not tainted 4.0.0-rc2+ #9197
  Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
  Workqueue: events_freezable thermal_zone_device_check
  task: 9f25a200 ti: 9f1ee000 task.ti: 9f1ee000
  PC is at ftrace_raw_event_regmap_block+0x3c/0xe4
  LR is at _regmap_raw_read+0x1bc/0x1cc
  pc : [<803636e8>]    lr : [<80365f2c>]    psr: 600f0093
  sp : 9f1efd78  ip : 9f1efdb8  fp : 9f1efdb4
  r10: 00000004  r9 : 00000001  r8 : 00000001
  r7 : 00000180  r6 : 00000000  r5 : 9f00e3c0  r4 : 00000003
  r3 : 00000001  r2 : 00000180  r1 : 00000000  r0 : 9f00e3c0
  Flags: nZCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
  Control: 10c5387d  Table: 2d91004a  DAC: 00000015
  Process kworker/0:2 (pid: 304, stack limit = 0x9f1ee210)
  Stack: (0x9f1efd78 to 0x9f1f0000)
  fd60:                                                       9f1efda4 9f1efd88
  fd80: 800708c0 805f9510 80927140 800f0013 9f1fc800 9eb2f490 00000000 00000180
  fda0: 808e3840 00000001 9f1efdfc 9f1efdb8 80365f2c 803636b8 805f8958 800708e0
  fdc0: a00f0013 803636ac 9f16de00 00000180 80927140 9f1fc800 9f1fc800 9f1efe6c
  fde0: 9f1efe6c 9f732400 00000000 00000000 9f1efe1c 9f1efe00 80365f70 80365d7c
  fe00: 80365f3c 9f1fc800 9f1fc800 00000180 9f1efe44 9f1efe20 803656a4 80365f48
  fe20: 9f1fc800 00000180 9f1efe6c 9f1efe6c 9f732400 00000000 9f1efe64 9f1efe48
  fe40: 803657bc 80365634 00000001 9e95f910 9f1fc800 9f1efeb4 9f1efe8c 9f1efe68
  fe60: 80452ac0 80365778 9f1efe8c 9f1efe78 9e93d400 9e93d5e8 9f1efeb4 9f72ef40
  fe80: 9f1efeac 9f1efe90 8044e11c 80452998 8045298c 9e93d608 9e93d400 808e1978
  fea0: 9f1efecc 9f1efeb0 8044fd14 8044e0d0 ffffffff 9f25a200 9e93d608 9e481380
  fec0: 9f1efedc 9f1efed0 8044fde8 8044fcec 9f1eff1c 9f1efee0 80038d50 8044fdd8
  fee0: 9f1ee020 9f72ef40 9e481398 00000000 00000008 9f72ef54 9f1ee020 9f72ef40
  ff00: 9e481398 9e481380 00000008 9f72ef40 9f1eff5c 9f1eff20 80039754 80038bfc
  ff20: 00000000 9e481380 80894100 808e1662 00000000 9e4f2ec0 00000000 9e481380
  ff40: 800396f8 00000000 00000000 00000000 9f1effac 9f1eff60 8003e020 80039704
  ff60: ffffffff 00000000 ffffffff 9e481380 00000000 00000000 9f1eff78 9f1eff78
  ff80: 00000000 00000000 9f1eff88 9f1eff88 9e4f2ec0 8003df30 00000000 00000000
  ffa0: 00000000 9f1effb0 8000eb60 8003df3c 00000000 00000000 00000000 00000000
  ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff
  Backtrace:
  [<803636ac>] (ftrace_raw_event_regmap_block) from [<80365f2c>] (_regmap_raw_read+0x1bc/0x1cc)
   r9:00000001 r8:808e3840 r7:00000180 r6:00000000 r5:9eb2f490 r4:9f1fc800
  [<80365d70>] (_regmap_raw_read) from [<80365f70>] (_regmap_bus_read+0x34/0x6c)
   r10:00000000 r9:00000000 r8:9f732400 r7:9f1efe6c r6:9f1efe6c r5:9f1fc800
   r4:9f1fc800
  [<80365f3c>] (_regmap_bus_read) from [<803656a4>] (_regmap_read+0x7c/0x144)
   r6:00000180 r5:9f1fc800 r4:9f1fc800 r3:80365f3c
  [<80365628>] (_regmap_read) from [<803657bc>] (regmap_read+0x50/0x70)
   r9:00000000 r8:9f732400 r7:9f1efe6c r6:9f1efe6c r5:00000180 r4:9f1fc800
  [<8036576c>] (regmap_read) from [<80452ac0>] (imx_get_temp+0x134/0x1a4)
   r6:9f1efeb4 r5:9f1fc800 r4:9e95f910 r3:00000001
  [<8045298c>] (imx_get_temp) from [<8044e11c>] (thermal_zone_get_temp+0x58/0x74)
   r7:9f72ef40 r6:9f1efeb4 r5:9e93d5e8 r4:9e93d400
  [<8044e0c4>] (thermal_zone_get_temp) from [<8044fd14>] (thermal_zone_device_update+0x34/0xec)
   r6:808e1978 r5:9e93d400 r4:9e93d608 r3:8045298c
  [<8044fce0>] (thermal_zone_device_update) from [<8044fde8>] (thermal_zone_device_check+0x1c/0x20)
   r5:9e481380 r4:9e93d608
  [<8044fdcc>] (thermal_zone_device_check) from [<80038d50>] (process_one_work+0x160/0x3d4)
  [<80038bf0>] (process_one_work) from [<80039754>] (worker_thread+0x5c/0x4f4)
   r10:9f72ef40 r9:00000008 r8:9e481380 r7:9e481398 r6:9f72ef40 r5:9f1ee020
   r4:9f72ef54
  [<800396f8>] (worker_thread) from [<8003e020>] (kthread+0xf0/0x108)
   r10:00000000 r9:00000000 r8:00000000 r7:800396f8 r6:9e481380 r5:00000000
   r4:9e4f2ec0
  [<8003df30>] (kthread) from [<8000eb60>] (ret_from_fork+0x14/0x34)
   r7:00000000 r6:00000000 r5:8003df30 r4:9e4f2ec0
  Code: e3140040 1a00001a e3140020 1a000016 (e596002c)
  ---[ end trace 193c15c2494ec960 ]---

Fixes: bdb0066df9 (mfd: syscon: Decouple syscon interface from platform devices)
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2015-03-19 20:04:55 +00:00
Stephen Boyd dfc202ead3 clk: Add tracepoints for hardware operations
It's useful to have tracepoints around operations that change the
hardware state so that we can debug clock hardware performance
and operations. Four basic types of events are supported: on/off
events for enable, disable, prepare, unprepare that only record
an event and a clock name, rate changing events for
clk_set_{min_,max_}rate{_range}(), phase changing events for
clk_set_phase() and parent changing events for clk_set_parent().

Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-03-12 12:18:51 -07:00
Chao Yu 1ec4610c52 f2fs: add trace for rb-tree extent cache ops
This patch adds trace for lookup/update/shrink/destroy ops in rb-tree extent cache.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-03-03 09:58:47 -08:00
Linus Torvalds 038911597e Merge branch 'lazytime' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull lazytime mount option support from Al Viro:
 "Lazytime stuff from tytso"

* 'lazytime' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  ext4: add optimization for the lazytime mount option
  vfs: add find_inode_nowait() function
  vfs: add support for a lazytime mount option
2015-02-17 16:12:34 -08:00
Linus Torvalds b9085bcbf5 Fairly small update, but there are some interesting new features.
Common: Optional support for adding a small amount of polling on each HLT
 instruction executed in the guest (or equivalent for other architectures).
 This can improve latency up to 50% on some scenarios (e.g. O_DSYNC writes
 or TCP_RR netperf tests).  This also has to be enabled manually for now,
 but the plan is to auto-tune this in the future.
 
 ARM/ARM64: the highlights are support for GICv3 emulation and dirty page
 tracking
 
 s390: several optimizations and bugfixes.  Also a first: a feature
 exposed by KVM (UUID and long guest name in /proc/sysinfo) before
 it is available in IBM's hypervisor! :)
 
 MIPS: Bugfixes.
 
 x86: Support for PML (page modification logging, a new feature in
 Broadwell Xeons that speeds up dirty page tracking), nested virtualization
 improvements (nested APICv---a nice optimization), usual round of emulation
 fixes.  There is also a new option to reduce latency of the TSC deadline
 timer in the guest; this needs to be tuned manually.
 
 Some commits are common between this pull and Catalin's; I see you
 have already included his tree.
 
 ARM has other conflicts where functions are added in the same place
 by 3.19-rc and 3.20 patches.  These are not large though, and entirely
 within KVM.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJU28rkAAoJEL/70l94x66DXqQH/1TDOfJIjW7P2kb0Sw7Fy1wi
 cEX1KO/VFxAqc8R0E/0Wb55CXyPjQJM6xBXuFr5cUDaIjQ8ULSktL4pEwXyyv/s5
 DBDkN65mriry2w5VuEaRLVcuX9Wy+tqLQXWNkEySfyb4uhZChWWHvKEcgw5SqCyg
 NlpeHurYESIoNyov3jWqvBjr4OmaQENyv7t2c6q5ErIgG02V+iCux5QGbphM2IC9
 LFtPKxoqhfeB2xFxTOIt8HJiXrZNwflsTejIlCl/NSEiDVLLxxHCxK2tWK/tUXMn
 JfLD9ytXBWtNMwInvtFm4fPmDouv2VDyR0xnK2db+/axsJZnbxqjGu1um4Dqbak=
 =7gdx
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM update from Paolo Bonzini:
 "Fairly small update, but there are some interesting new features.

  Common:
     Optional support for adding a small amount of polling on each HLT
     instruction executed in the guest (or equivalent for other
     architectures).  This can improve latency up to 50% on some
     scenarios (e.g. O_DSYNC writes or TCP_RR netperf tests).  This
     also has to be enabled manually for now, but the plan is to
     auto-tune this in the future.

  ARM/ARM64:
     The highlights are support for GICv3 emulation and dirty page
     tracking

  s390:
     Several optimizations and bugfixes.  Also a first: a feature
     exposed by KVM (UUID and long guest name in /proc/sysinfo) before
     it is available in IBM's hypervisor! :)

  MIPS:
     Bugfixes.

  x86:
     Support for PML (page modification logging, a new feature in
     Broadwell Xeons that speeds up dirty page tracking), nested
     virtualization improvements (nested APICv---a nice optimization),
     usual round of emulation fixes.

     There is also a new option to reduce latency of the TSC deadline
     timer in the guest; this needs to be tuned manually.

     Some commits are common between this pull and Catalin's; I see you
     have already included his tree.

  Powerpc:
     Nothing yet.

     The KVM/PPC changes will come in through the PPC maintainers,
     because I haven't received them yet and I might end up being
     offline for some part of next week"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (130 commits)
  KVM: ia64: drop kvm.h from installed user headers
  KVM: x86: fix build with !CONFIG_SMP
  KVM: x86: emulate: correct page fault error code for NoWrite instructions
  KVM: Disable compat ioctl for s390
  KVM: s390: add cpu model support
  KVM: s390: use facilities and cpu_id per KVM
  KVM: s390/CPACF: Choose crypto control block format
  s390/kernel: Update /proc/sysinfo file with Extended Name and UUID
  KVM: s390: reenable LPP facility
  KVM: s390: floating irqs: fix user triggerable endless loop
  kvm: add halt_poll_ns module parameter
  kvm: remove KVM_MMIO_SIZE
  KVM: MIPS: Don't leak FPU/DSP to guest
  KVM: MIPS: Disable HTW while in guest
  KVM: nVMX: Enable nested posted interrupt processing
  KVM: nVMX: Enable nested virtual interrupt delivery
  KVM: nVMX: Enable nested apic register virtualization
  KVM: nVMX: Make nested control MSRs per-cpu
  KVM: nVMX: Enable nested virtualize x2apic mode
  KVM: nVMX: Prepare for using hardware MSR bitmap
  ...
2015-02-13 09:55:09 -08:00
Linus Torvalds c7d7b98671 Merge tag 'for-f2fs-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
 "Major changes are to:
   - add f2fs_io_tracer and F2FS_IOC_GETVERSION
   - fix wrong acl assignment from parent
   - fix accessing wrong data blocks
   - fix wrong condition check for f2fs_sync_fs
   - align start block address for direct_io
   - add and refactor the readahead flows of FS metadata
   - refactor atomic and volatile write policies

  But most of patches are for clean-ups and minor bug fixes.  Some of
  them refactor old code too"

* tag 'for-f2fs-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (64 commits)
  f2fs: use spinlock for segmap_lock instead of rwlock
  f2fs: fix accessing wrong indexed data blocks
  f2fs: avoid variable length array
  f2fs: fix sparse warnings
  f2fs: allocate data blocks in advance for f2fs_direct_IO
  f2fs: introduce macros to convert bytes and blocks in f2fs
  f2fs: call set_buffer_new for get_block
  f2fs: check node page contents all the time
  f2fs: avoid data offset overflow when lseeking huge file
  f2fs: fix to use highmem for pages of newly created directory
  f2fs: introduce a batched trim
  f2fs: merge {invalidate,release}page for meta/node/data pages
  f2fs: show the number of writeback pages in stat
  f2fs: keep PagePrivate during releasepage
  f2fs: should fail mount when trying to recover data on read-only dev
  f2fs: split UMOUNT and FASTBOOT flags
  f2fs: avoid write_checkpoint if f2fs is mounted readonly
  f2fs: support norecovery mount option
  f2fs: fix not to drop mount options when retrying fill_super
  f2fs: merge flags in struct f2fs_sb_info
  ...
2015-02-12 19:28:50 -08:00
Linus Torvalds 6bec003528 Merge branch 'for-3.20/bdi' of git://git.kernel.dk/linux-block
Pull backing device changes from Jens Axboe:
 "This contains a cleanup of how the backing device is handled, in
  preparation for a rework of the life time rules.  In this part, the
  most important change is to split the unrelated nommu mmap flags from
  it, but also removing a backing_dev_info pointer from the
  address_space (and inode), and a cleanup of other various minor bits.

  Christoph did all the work here, I just fixed an oops with pages that
  have a swap backing.  Arnd fixed a missing export, and Oleg killed the
  lustre backing_dev_info from staging.  Last patch was from Al,
  unexporting parts that are now no longer needed outside"

* 'for-3.20/bdi' of git://git.kernel.dk/linux-block:
  Make super_blocks and sb_lock static
  mtd: export new mtd_mmap_capabilities
  fs: make inode_to_bdi() handle NULL inode
  staging/lustre/llite: get rid of backing_dev_info
  fs: remove default_backing_dev_info
  fs: don't reassign dirty inodes to default_backing_dev_info
  nfs: don't call bdi_unregister
  ceph: remove call to bdi_unregister
  fs: remove mapping->backing_dev_info
  fs: export inode_to_bdi and use it in favor of mapping->backing_dev_info
  nilfs2: set up s_bdi like the generic mount_bdev code
  block_dev: get bdev inode bdi directly from the block device
  block_dev: only write bdev inode on close
  fs: introduce f_op->mmap_capabilities for nommu mmap support
  fs: kill BDI_CAP_SWAP_BACKED
  fs: deduplicate noop_backing_dev_info
2015-02-12 13:50:21 -08:00
Linus Torvalds a26be149fa IOMMU Updates for Linux v3.20
This time with:
 
 	* Generic page-table framework for ARM IOMMUs using the LPAE page-table
 	  format, ARM-SMMU and Renesas IPMMU make use of it already.
 
 	* Break out of the IO virtual address allocator from the Intel IOMMU so
 	  that it can be used by other DMA-API implementations too. The first
 	  user will be the ARM64 common DMA-API implementation for IOMMUs
 
 	* Device tree support for Renesas IPMMU
 
 	* Various fixes and cleanups all over the place
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJU3MJOAAoJECvwRC2XARrjopUP+wachFx8vb00M4hlnlwL6FCn
 DyIFkA1n4wL0muPhjcBI+LViEXrSxjr2TYoJEaBg+fiByWWQ1Hefg+KPz331Lo1D
 +uo7WiOa1AB3pfkQiUN9IN6xx+o6ivhb3UQPiL4FHjggB/qz+KVxMM9nx0j8o0fQ
 D9q6HLFiOIsFkra3xZaSuDGvYUBpcwyfn8FP1HVfvLlg1uxIGDcUJX3qU5UBpj9q
 al/lPZ4A7rp+JLApV6WyouPiyVOZKikb5x920KeRNBem7a9fNBdgf+x7QbKpNXa1
 5MaT5MarwGe8lJE4wtjOqRtsllhia+A1rg/6JbROPrlGetRFiuIh2sCKLvwOCko/
 IjBHSutpaRT1lFoAG0TAnXQlvHRG/58XxOlP3eF613X/p8/cezuUaTyTIwZam9X3
 j2GWwbUcBiHTxlu7bQDPz6a7cTf4w6wEALzYl18QrAFv+2LqlCfOo/LSlpStmjrF
 kRN8DYaohlTULvmFneSr8rfGsnp5yPgIPvdmqiSwTz/Ih7kYPgfLy6+v6IAHUqZj
 0n9oGs8eMqVvSzM2qqmyA9WGuQZRyhNjj4iDwn/he5YMw2kqxUQYGMpLnSu0Oi48
 n4PqodtVol64jKLwaHZwyU8u71iyjUC5K9TDot/I2wlSRcTELJhxGh6c1sfDLyrO
 u/htIszgKCgFvVrQoEZB
 =dwrA
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull IOMMU updates from Joerg Roedel:
 "This time with:

   - Generic page-table framework for ARM IOMMUs using the LPAE
     page-table format, ARM-SMMU and Renesas IPMMU make use of it
     already.

   - Break out the IO virtual address allocator from the Intel IOMMU so
     that it can be used by other DMA-API implementations too.  The
     first user will be the ARM64 common DMA-API implementation for
     IOMMUs

   - Device tree support for Renesas IPMMU

   - Various fixes and cleanups all over the place"

* tag 'iommu-updates-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (36 commits)
  iommu/amd: Convert non-returned local variable to boolean when relevant
  iommu: Update my email address
  iommu/amd: Use wait_event in put_pasid_state_wait
  iommu/amd: Fix amd_iommu_free_device()
  iommu/arm-smmu: Avoid build warning
  iommu/fsl: Various cleanups
  iommu/fsl: Use %pa to print phys_addr_t
  iommu/omap: Print phys_addr_t using %pa
  iommu: Make more drivers depend on COMPILE_TEST
  iommu/ipmmu-vmsa: Fix IOMMU lookup when multiple IOMMUs are registered
  iommu: Disable on !MMU builds
  iommu/fsl: Remove unused fsl_of_pamu_ids[]
  iommu/fsl: Fix section mismatch
  iommu/ipmmu-vmsa: Use the ARM LPAE page table allocator
  iommu: Fix trace_map() to report original iova and original size
  iommu/arm-smmu: add support for iova_to_phys through ATS1PR
  iopoll: Introduce memory-mapped IO polling macros
  iommu/arm-smmu: don't touch the secure STLBIALL register
  iommu/arm-smmu: make use of generic LPAE allocator
  iommu: io-pgtable-arm: add non-secure quirk
  ...
2015-02-12 09:16:56 -08:00
Linus Torvalds 41cbc01f6e The updates included in this pull request for ftrace are:
o Several clean ups to the code
 
    One such clean up was to convert to 64 bit time keeping, in the
    ring buffer benchmark code.
 
  o Adding of __print_array() helper macro for TRACE_EVENT()
 
  o Updating the sample/trace_events/ to add samples of different ways to
    make trace events. Lots of features have been added since the sample
    code was made, and these features are mostly unknown. Developers
    have been making their own hacks to do things that are already available.
 
  o Performance improvements. Most notably, I found a performance bug where
    a waiter that is waiting for a full page from the ring buffer will
    see that a full page is not available, and go to sleep. The sched
    event caused by it going to sleep would cause it to wake up again.
    It would see that there was still not a full page, and go back to sleep
    again, and that would wake it up again, until finally it would see a
    full page. This change has been marked for stable.
 
    Other improvements include removing global locks from fast paths.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJU3M+GAAoJEEjnJuOKh9ldpWQIAJTUzeVXlU0cf3bVn768VW7e
 XS41WHF34l1tNevmKTh6fCPiw8+U0UMGLQt5WKtyaaARsZn2MlefLVuvHPKFlK2w
 +qcI4OEVHH97Qgf9HWJSsYgnZaOnOE+TENqnokEgXMimRMuVcd/S4QaGxwJVDcjm
 iBF5j2TaG4aGbx4a3J7KueoZ3K+39r3ut15hIGi/IZBZldQ1pt26ytafD/KA3CU3
 BLRM2HLttAMsV1ds0EDLgZjSGICVetFcdOmI5Gwj7Qr3KrOTRPYJMNc8NdDL7Js9
 v8VhujhFGvcCrhO/IKpVvd9yluz3RCF+Z7ihc+D/+1B3Nsm0PTwN3Fl5J+f89AA=
 =u2Mm
 -----END PGP SIGNATURE-----

Merge tag 'trace-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:
 "The updates included in this pull request for ftrace are:

   o Several clean ups to the code

     One such clean up was to convert to 64 bit time keeping, in the
     ring buffer benchmark code.

   o Adding of __print_array() helper macro for TRACE_EVENT()

   o Updating the sample/trace_events/ to add samples of different ways
     to make trace events.  Lots of features have been added since the
     sample code was made, and these features are mostly unknown.
     Developers have been making their own hacks to do things that are
     already available.

   o Performance improvements.  Most notably, I found a performance bug
     where a waiter that is waiting for a full page from the ring buffer
     will see that a full page is not available, and go to sleep.  The
     sched event caused by it going to sleep would cause it to wake up
     again.  It would see that there was still not a full page, and go
     back to sleep again, and that would wake it up again, until finally
     it would see a full page.  This change has been marked for stable.

  Other improvements include removing global locks from fast paths"

* tag 'trace-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ring-buffer: Do not wake up a splice waiter when page is not full
  tracing: Fix unmapping loop in tracing_mark_write
  tracing: Add samples of DECLARE_EVENT_CLASS() and DEFINE_EVENT()
  tracing: Add TRACE_EVENT_FN example
  tracing: Add TRACE_EVENT_CONDITION sample
  tracing: Update the TRACE_EVENT fields available in the sample code
  tracing: Separate out initializing top level dir from instances
  tracing: Make tracing_init_dentry_tr() static
  trace: Use 64-bit timekeeping
  tracing: Add array printing helper
  tracing: Remove newline from trace_printk warning banner
  tracing: Use IS_ERR() check for return value of tracing_init_dentry()
  tracing: Remove unneeded includes of debugfs.h and fs.h
  tracing: Remove taking of trace_types_lock in pipe files
  tracing: Add ref count to tracer for when they are being read by pipe
2015-02-12 08:37:41 -08:00
Vlastimil Babka 99592d598e mm: when stealing freepages, also take pages created by splitting buddy page
When studying page stealing, I noticed some weird looking decisions in
try_to_steal_freepages().  The first I assume is a bug (Patch 1), the
following two patches were driven by evaluation.

Testing was done with stress-highalloc of mmtests, using the
mm_page_alloc_extfrag tracepoint and postprocessing to get counts of how
often page stealing occurs for individual migratetypes, and what
migratetypes are used for fallbacks.  Arguably, the worst case of page
stealing is when UNMOVABLE allocation steals from MOVABLE pageblock.
RECLAIMABLE allocation stealing from MOVABLE allocation is also not ideal,
so the goal is to minimize these two cases.

The evaluation of v2 wasn't always clear win and Joonsoo questioned the
results.  Here I used different baseline which includes RFC compaction
improvements from [1].  I found that the compaction improvements reduce
variability of stress-highalloc, so there's less noise in the data.

First, let's look at stress-highalloc configured to do sync compaction,
and how these patches reduce page stealing events during the test.  First
column is after fresh reboot, other two are reiterations of test without
reboot.  That was all accumulater over 5 re-iterations (so the benchmark
was run 5x3 times with 5 fresh restarts).

Baseline:

                                                   3.19-rc4        3.19-rc4        3.19-rc4
                                                  5-nothp-1       5-nothp-2       5-nothp-3
Page alloc extfrag event                               10264225     8702233    10244125
Extfrag fragmenting                                    10263271     8701552    10243473
Extfrag fragmenting for unmovable                         13595       17616       15960
Extfrag fragmenting unmovable placed with movable          7989       12193        8447
Extfrag fragmenting for reclaimable                         658        1840        1817
Extfrag fragmenting reclaimable placed with movable         558        1677        1679
Extfrag fragmenting for movable                        10249018     8682096    10225696

With Patch 1:
                                                   3.19-rc4        3.19-rc4        3.19-rc4
                                                  6-nothp-1       6-nothp-2       6-nothp-3
Page alloc extfrag event                               11834954     9877523     9774860
Extfrag fragmenting                                    11833993     9876880     9774245
Extfrag fragmenting for unmovable                          7342       16129       11712
Extfrag fragmenting unmovable placed with movable          4191       10547        6270
Extfrag fragmenting for reclaimable                         373        1130         923
Extfrag fragmenting reclaimable placed with movable         302         906         738
Extfrag fragmenting for movable                        11826278     9859621     9761610

With Patch 2:
                                                   3.19-rc4        3.19-rc4        3.19-rc4
                                                  7-nothp-1       7-nothp-2       7-nothp-3
Page alloc extfrag event                                4725990     3668793     3807436
Extfrag fragmenting                                     4725104     3668252     3806898
Extfrag fragmenting for unmovable                          6678        7974        7281
Extfrag fragmenting unmovable placed with movable          2051        3829        4017
Extfrag fragmenting for reclaimable                         429        1208        1278
Extfrag fragmenting reclaimable placed with movable         369         976        1034
Extfrag fragmenting for movable                         4717997     3659070     3798339

With Patch 3:
                                                   3.19-rc4        3.19-rc4        3.19-rc4
                                                  8-nothp-1       8-nothp-2       8-nothp-3
Page alloc extfrag event                                5016183     4700142     3850633
Extfrag fragmenting                                     5015325     4699613     3850072
Extfrag fragmenting for unmovable                          1312        3154        3088
Extfrag fragmenting unmovable placed with movable          1115        2777        2714
Extfrag fragmenting for reclaimable                         437        1193        1097
Extfrag fragmenting reclaimable placed with movable         330         969         879
Extfrag fragmenting for movable                         5013576     4695266     3845887

In v2 we've seen apparent regression with Patch 1 for unmovable events,
this is now gone, suggesting it was indeed noise.  Here, each patch
improves the situation for unmovable events.  Reclaimable is improved by
patch 1 and then either the same modulo noise, or perhaps sligtly worse -
a small price for unmovable improvements, IMHO.  The number of movable
allocations falling back to other migratetypes is most noisy, but it's
reduced to half at Patch 2 nevertheless.  These are least critical as
compaction can move them around.

If we look at success rates, the patches don't affect them, that didn't change.

Baseline:
                             3.19-rc4              3.19-rc4              3.19-rc4
                            5-nothp-1             5-nothp-2             5-nothp-3
Success 1 Min         49.00 (  0.00%)       42.00 ( 14.29%)       41.00 ( 16.33%)
Success 1 Mean        51.00 (  0.00%)       45.00 ( 11.76%)       42.60 ( 16.47%)
Success 1 Max         55.00 (  0.00%)       51.00 (  7.27%)       46.00 ( 16.36%)
Success 2 Min         53.00 (  0.00%)       47.00 ( 11.32%)       44.00 ( 16.98%)
Success 2 Mean        59.60 (  0.00%)       50.80 ( 14.77%)       48.20 ( 19.13%)
Success 2 Max         64.00 (  0.00%)       56.00 ( 12.50%)       52.00 ( 18.75%)
Success 3 Min         84.00 (  0.00%)       82.00 (  2.38%)       78.00 (  7.14%)
Success 3 Mean        85.60 (  0.00%)       82.80 (  3.27%)       79.40 (  7.24%)
Success 3 Max         86.00 (  0.00%)       83.00 (  3.49%)       80.00 (  6.98%)

Patch 1:
                             3.19-rc4              3.19-rc4              3.19-rc4
                            6-nothp-1             6-nothp-2             6-nothp-3
Success 1 Min         49.00 (  0.00%)       44.00 ( 10.20%)       44.00 ( 10.20%)
Success 1 Mean        51.80 (  0.00%)       46.00 ( 11.20%)       45.80 ( 11.58%)
Success 1 Max         54.00 (  0.00%)       49.00 (  9.26%)       49.00 (  9.26%)
Success 2 Min         58.00 (  0.00%)       49.00 ( 15.52%)       48.00 ( 17.24%)
Success 2 Mean        60.40 (  0.00%)       51.80 ( 14.24%)       50.80 ( 15.89%)
Success 2 Max         63.00 (  0.00%)       54.00 ( 14.29%)       55.00 ( 12.70%)
Success 3 Min         84.00 (  0.00%)       81.00 (  3.57%)       79.00 (  5.95%)
Success 3 Mean        85.00 (  0.00%)       81.60 (  4.00%)       79.80 (  6.12%)
Success 3 Max         86.00 (  0.00%)       82.00 (  4.65%)       82.00 (  4.65%)

Patch 2:

                             3.19-rc4              3.19-rc4              3.19-rc4
                            7-nothp-1             7-nothp-2             7-nothp-3
Success 1 Min         50.00 (  0.00%)       44.00 ( 12.00%)       39.00 ( 22.00%)
Success 1 Mean        52.80 (  0.00%)       45.60 ( 13.64%)       42.40 ( 19.70%)
Success 1 Max         55.00 (  0.00%)       46.00 ( 16.36%)       47.00 ( 14.55%)
Success 2 Min         52.00 (  0.00%)       48.00 (  7.69%)       45.00 ( 13.46%)
Success 2 Mean        53.40 (  0.00%)       49.80 (  6.74%)       48.80 (  8.61%)
Success 2 Max         57.00 (  0.00%)       52.00 (  8.77%)       52.00 (  8.77%)
Success 3 Min         84.00 (  0.00%)       81.00 (  3.57%)       79.00 (  5.95%)
Success 3 Mean        85.00 (  0.00%)       82.40 (  3.06%)       79.60 (  6.35%)
Success 3 Max         86.00 (  0.00%)       83.00 (  3.49%)       80.00 (  6.98%)

Patch 3:
                             3.19-rc4              3.19-rc4              3.19-rc4
                            8-nothp-1             8-nothp-2             8-nothp-3
Success 1 Min         46.00 (  0.00%)       44.00 (  4.35%)       42.00 (  8.70%)
Success 1 Mean        50.20 (  0.00%)       45.60 (  9.16%)       44.00 ( 12.35%)
Success 1 Max         52.00 (  0.00%)       47.00 (  9.62%)       47.00 (  9.62%)
Success 2 Min         53.00 (  0.00%)       49.00 (  7.55%)       48.00 (  9.43%)
Success 2 Mean        55.80 (  0.00%)       50.60 (  9.32%)       49.00 ( 12.19%)
Success 2 Max         59.00 (  0.00%)       52.00 ( 11.86%)       51.00 ( 13.56%)
Success 3 Min         84.00 (  0.00%)       80.00 (  4.76%)       79.00 (  5.95%)
Success 3 Mean        85.40 (  0.00%)       81.60 (  4.45%)       80.40 (  5.85%)
Success 3 Max         87.00 (  0.00%)       83.00 (  4.60%)       82.00 (  5.75%)

While there's no improvement here, I consider reduced fragmentation events
to be worth on its own.  Patch 2 also seems to reduce scanning for free
pages, and migrations in compaction, suggesting it has somewhat less work
to do:

Patch 1:

Compaction stalls                 4153        3959        3978
Compaction success                1523        1441        1446
Compaction failures               2630        2517        2531
Page migrate success           4600827     4943120     5104348
Page migrate failure             19763       16656       17806
Compaction pages isolated      9597640    10305617    10653541
Compaction migrate scanned    77828948    86533283    87137064
Compaction free scanned      517758295   521312840   521462251
Compaction cost                   5503        5932        6110

Patch 2:

Compaction stalls                 3800        3450        3518
Compaction success                1421        1316        1317
Compaction failures               2379        2134        2201
Page migrate success           4160421     4502708     4752148
Page migrate failure             19705       14340       14911
Compaction pages isolated      8731983     9382374     9910043
Compaction migrate scanned    98362797    96349194    98609686
Compaction free scanned      496512560   469502017   480442545
Compaction cost                   5173        5526        5811

As with v2, /proc/pagetypeinfo appears unaffected with respect to numbers
of unmovable and reclaimable pageblocks.

Configuring the benchmark to allocate like THP page fault (i.e.  no sync
compaction) gives much noisier results for iterations 2 and 3 after
reboot.  This is not so surprising given how [1] offers lower improvements
in this scenario due to less restarts after deferred compaction which
would change compaction pivot.

Baseline:
                                                   3.19-rc4        3.19-rc4        3.19-rc4
                                                    5-thp-1         5-thp-2         5-thp-3
Page alloc extfrag event                                8148965     6227815     6646741
Extfrag fragmenting                                     8147872     6227130     6646117
Extfrag fragmenting for unmovable                         10324       12942       15975
Extfrag fragmenting unmovable placed with movable          5972        8495       10907
Extfrag fragmenting for reclaimable                         601        1707        2210
Extfrag fragmenting reclaimable placed with movable         520        1570        2000
Extfrag fragmenting for movable                         8136947     6212481     6627932

Patch 1:
                                                   3.19-rc4        3.19-rc4        3.19-rc4
                                                    6-thp-1         6-thp-2         6-thp-3
Page alloc extfrag event                                8345457     7574471     7020419
Extfrag fragmenting                                     8343546     7573777     7019718
Extfrag fragmenting for unmovable                         10256       18535       30716
Extfrag fragmenting unmovable placed with movable          6893       11726       22181
Extfrag fragmenting for reclaimable                         465        1208        1023
Extfrag fragmenting reclaimable placed with movable         353         996         843
Extfrag fragmenting for movable                         8332825     7554034     6987979

Patch 2:
                                                   3.19-rc4        3.19-rc4        3.19-rc4
                                                    7-thp-1         7-thp-2         7-thp-3
Page alloc extfrag event                                3512847     3020756     2891625
Extfrag fragmenting                                     3511940     3020185     2891059
Extfrag fragmenting for unmovable                          9017        6892        6191
Extfrag fragmenting unmovable placed with movable          1524        3053        2435
Extfrag fragmenting for reclaimable                         445        1081        1160
Extfrag fragmenting reclaimable placed with movable         375         918         986
Extfrag fragmenting for movable                         3502478     3012212     2883708

Patch 3:
                                                   3.19-rc4        3.19-rc4        3.19-rc4
                                                    8-thp-1         8-thp-2         8-thp-3
Page alloc extfrag event                                3181699     3082881     2674164
Extfrag fragmenting                                     3180812     3082303     2673611
Extfrag fragmenting for unmovable                          1201        4031        4040
Extfrag fragmenting unmovable placed with movable           974        3611        3645
Extfrag fragmenting for reclaimable                         478        1165        1294
Extfrag fragmenting reclaimable placed with movable         387         985        1030
Extfrag fragmenting for movable                         3179133     3077107     2668277

The improvements for first iteration are clear, the rest is much noisier
and can appear like regression for Patch 1.  Anyway, patch 2 rectifies it.

Allocation success rates are again unaffected so there's no point in
making this e-mail any longer.

[1] http://marc.info/?l=linux-mm&m=142166196321125&w=2

This patch (of 3):

When __rmqueue_fallback() is called to allocate a page of order X, it will
find a page of order Y >= X of a fallback migratetype, which is different
from the desired migratetype.  With the help of try_to_steal_freepages(),
it may change the migratetype (to the desired one) also of:

1) all currently free pages in the pageblock containing the fallback page
2) the fallback pageblock itself
3) buddy pages created by splitting the fallback page (when Y > X)

These decisions take the order Y into account, as well as the desired
migratetype, with the goal of preventing multiple fallback allocations
that could e.g.  distribute UNMOVABLE allocations among multiple
pageblocks.

Originally, decision for 1) has implied the decision for 3).  Commit
47118af076 ("mm: mmzone: MIGRATE_CMA migration type added") changed that
(probably unintentionally) so that the buddy pages in case 3) are always
changed to the desired migratetype, except for CMA pageblocks.

Commit fef903efcf ("mm/page_allo.c: restructure free-page stealing code
and fix a bug") did some refactoring and added a comment that the case of
3) is intended.  Commit 0cbef29a78 ("mm: __rmqueue_fallback() should
respect pageblock type") removed the comment and tried to restore the
original behavior where 1) implies 3), but due to the previous
refactoring, the result is instead that only 2) implies 3) - and the
conditions for 2) are less frequently met than conditions for 1).  This
may increase fragmentation in situations where the code decides to steal
all free pages from the pageblock (case 1)), but then gives back the buddy
pages produced by splitting.

This patch restores the original intended logic where 1) implies 3).
During testing with stress-highalloc from mmtests, this has shown to
decrease the number of events where UNMOVABLE and RECLAIMABLE allocations
steal from MOVABLE pageblocks, which can lead to permanent fragmentation.
In some cases it has increased the number of events when MOVABLE
allocations steal from UNMOVABLE or RECLAIMABLE pageblocks, but these are
fixable by sync compaction and thus less harmful.

Note that evaluation has shown that the behavior introduced by
47118af076 for buddy pages in case 3) is actually even better than the
original logic, so the following patch will introduce it properly once
again.  For stable backports of this patch it makes thus sense to only fix
versions containing 0cbef29a78.

[iamjoonsoo.kim@lge.com: tracepoint fix]
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>	[3.13+ containing 0cbef29a78]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-11 17:06:06 -08:00
Joonsoo Kim 24e2716f63 mm/compaction: add tracepoint to observe behaviour of compaction defer
Compaction deferring logic is heavy hammer that block the way to the
compaction.  It doesn't consider overall system state, so it could prevent
user from doing compaction falsely.  In other words, even if system has
enough range of memory to compact, compaction would be skipped due to
compaction deferring logic.  This patch add new tracepoint to understand
work of deferring logic.  This will also help to check compaction success
and fail.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-11 17:06:04 -08:00
Joonsoo Kim 837d026d56 mm/compaction: more trace to understand when/why compaction start/finish
It is not well analyzed that when/why compaction start/finish or not.
With these new tracepoints, we can know much more about start/finish
reason of compaction.  I can find following bug with these tracepoint.

http://www.spinics.net/lists/linux-mm/msg81582.html

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-11 17:06:04 -08:00
Joonsoo Kim e34d85f0e3 mm/compaction: print current range where compaction work
It'd be useful to know current range where compaction work for detailed
analysis.  With it, we can know pageblock where we actually scan and
isolate, and, how much pages we try in that pageblock and can guess why it
doesn't become freepage with pageblock order roughly.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-11 17:06:04 -08:00
Joonsoo Kim 16c4a097a0 mm/compaction: enhance tracepoint output for compaction begin/end
We now have tracepoint for begin event of compaction and it prints start
position of both scanners, but, tracepoint for end event of compaction
doesn't print finish position of both scanners.  It'd be also useful to
know finish position of both scanners so this patch add it.  It will help
to find odd behavior or problem on compaction internal logic.

And mode is added to both begin/end tracepoint output, since according to
mode, compaction behavior is quite different.

And lastly, status format is changed to string rather than status number
for readability.

[akpm@linux-foundation.org: fix sparse warning]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-11 17:06:04 -08:00
Joonsoo Kim 4645f06334 mm/compaction: change tracepoint format from decimal to hexadecimal
To check the range that compaction is working, tracepoint print
start/end pfn of zone and start pfn of both scanner with decimal format.
Since we manage all pages in order of 2 and it is well represented by
hexadecimal, this patch change the tracepoint format from decimal to
hexadecimal.  This would improve readability.  For example, it makes us
easily notice whether current scanner try to compact previously
attempted pageblock or not.

Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-11 17:06:04 -08:00
Jaegeuk Kim 29e7043f40 f2fs: fix sparse warnings
This patch resolves the following warnings.

include/trace/events/f2fs.h:150:1: warning: expression using sizeof bool
include/trace/events/f2fs.h:180:1: warning: expression using sizeof bool
include/trace/events/f2fs.h:990:1: warning: expression using sizeof bool
include/trace/events/f2fs.h:990:1: warning: expression using sizeof bool
include/trace/events/f2fs.h:150:1: warning: odd constant _Bool cast (ffffffffffffffff becomes 1)
include/trace/events/f2fs.h:180:1: warning: odd constant _Bool cast (ffffffffffffffff becomes 1)
include/trace/events/f2fs.h:990:1: warning: odd constant _Bool cast (ffffffffffffffff becomes 1)
include/trace/events/f2fs.h:990:1: warning: odd constant _Bool cast (ffffffffffffffff becomes 1)

fs/f2fs/checkpoint.c:27:19: warning: symbol 'inode_entry_slab' was not declared. Should it be static?
fs/f2fs/checkpoint.c:577:15: warning: cast to restricted __le32
fs/f2fs/checkpoint.c:592:15: warning: cast to restricted __le32

fs/f2fs/trace.c:19:1: warning: symbol 'pids' was not declared. Should it be static?
fs/f2fs/trace.c:21:21: warning: symbol 'last_io' was not declared. Should it be static?

Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-02-11 17:04:49 -08:00
Jaegeuk Kim 119ee91445 f2fs: split UMOUNT and FASTBOOT flags
This patch adds FASTBOOT flag into checkpoint as follows.

 - CP_UMOUNT_FLAG is set when system is umounted.
 - CP_FASTBOOT_FLAG is set when intermediate checkpoint having node summaries
   was done.

So, if you get CP_UMOUNT_FLAG from checkpoint, the system was umounted cleanly.
Instead, if there was sudden-power-off, you can get CP_FASTBOOT_FLAG or nothing.

Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-02-11 17:04:41 -08:00
Chao Yu caf0047e7e f2fs: merge flags in struct f2fs_sb_info
Currently, there are several variables with Boolean type as below:

struct f2fs_sb_info {
...
	int s_dirty;
	bool need_fsck;
	bool s_closing;
...
	bool por_doing;
...
}

For this there are some issues:
1. there are some space of f2fs_sb_info is wasted due to aligning after Boolean
   type variables by compiler.
2. if we continuously add new flag into f2fs_sb_info, structure will be messed
   up.

So in this patch, we try to:
1. switch s_dirty to Boolean type variable since it has two status 0/1.
2. merge s_dirty/need_fsck/s_closing/por_doing variables into s_flag.
3. introduce an enum type which can indicate different states of sbi.
4. use new introduced universal interfaces is_sbi_flag_set/{set,clear}_sbi_flag
   to operate flags for sbi.

After that, above issues will be fixed.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-02-11 17:04:38 -08:00
Linus Torvalds c5ce28df0e Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) More iov_iter conversion work from Al Viro.

    [ The "crypto: switch af_alg_make_sg() to iov_iter" commit was
      wrong, and this pull actually adds an extra commit on top of the
      branch I'm pulling to fix that up, so that the pre-merge state is
      ok.   - Linus ]

 2) Various optimizations to the ipv4 forwarding information base trie
    lookup implementation.  From Alexander Duyck.

 3) Remove sock_iocb altogether, from CHristoph Hellwig.

 4) Allow congestion control algorithm selection via routing metrics.
    From Daniel Borkmann.

 5) Make ipv4 uncached route list per-cpu, from Eric Dumazet.

 6) Handle rfs hash collisions more gracefully, also from Eric Dumazet.

 7) Add xmit_more support to r8169, e1000, and e1000e drivers.  From
    Florian Westphal.

 8) Transparent Ethernet Bridging support for GRO, from Jesse Gross.

 9) Add BPF packet actions to packet scheduler, from Jiri Pirko.

10) Add support for uniqu flow IDs to openvswitch, from Joe Stringer.

11) New NetCP ethernet driver, from Muralidharan Karicheri and Wingman
    Kwok.

12) More sanely handle out-of-window dupacks, which can result in
    serious ACK storms.  From Neal Cardwell.

13) Various rhashtable bug fixes and enhancements, from Herbert Xu,
    Patrick McHardy, and Thomas Graf.

14) Support xmit_more in be2net, from Sathya Perla.

15) Group Policy extensions for vxlan, from Thomas Graf.

16) Remove Checksum Offload support for vxlan, from Tom Herbert.

17) Like ipv4, support lockless transmit over ipv6 UDP sockets.  From
    Vlad Yasevich.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1494+1 commits)
  crypto: fix af_alg_make_sg() conversion to iov_iter
  ipv4: Namespecify TCP PMTU mechanism
  i40e: Fix for stats init function call in Rx setup
  tcp: don't include Fast Open option in SYN-ACK on pure SYN-data
  openvswitch: Only set TUNNEL_VXLAN_OPT if VXLAN-GBP metadata is set
  ipv6: Make __ipv6_select_ident static
  ipv6: Fix fragment id assignment on LE arches.
  bridge: Fix inability to add non-vlan fdb entry
  net: Mellanox: Delete unnecessary checks before the function call "vunmap"
  cxgb4: Add support in cxgb4 to get expansion rom version via ethtool
  ethtool: rename reserved1 memeber in ethtool_drvinfo for expansion ROM version
  net: dsa: Remove redundant phy_attach()
  IB/mlx4: Reset flow support for IB kernel ULPs
  IB/mlx4: Always use the correct port for mirrored multicast attachments
  net/bonding: Fix potential bad memory access during bonding events
  tipc: remove tipc_snprintf
  tipc: nl compat add noop and remove legacy nl framework
  tipc: convert legacy nl stats show to nl compat
  tipc: convert legacy nl net id get to nl compat
  tipc: convert legacy nl net id set to nl compat
  ...
2015-02-10 20:01:30 -08:00
Linus Torvalds a4cbbf549a Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
 "Kernel side changes:

   - AMD range breakpoints support:

     Extend breakpoint tools and core to support address range through
     perf event with initial backend support for AMD extended
     breakpoints.

     The syntax is:

         perf record -e mem:addr/len:type

     For example set write breakpoint from 0x1000 to 0x1200 (0x1000 + 512)

         perf record -e mem:0x1000/512:w

   - event throttling/rotating fixes

   - various event group handling fixes, cleanups and general paranoia
     code to be more robust against bugs in the future.

    - kernel stack overhead fixes

  User-visible tooling side changes:

   - Show precise number of samples in at the end of a 'record' session,
     if processing build ids, since we will then traverse the whole
     perf.data file and see all the PERF_RECORD_SAMPLE records,
     otherwise stop showing the previous off-base heuristicly counted
     number of "samples" (Namhyung Kim).

   - Support to read compressed module from build-id cache (Namhyung
     Kim)

   - Enable sampling loads and stores simultaneously in 'perf mem'
     (Stephane Eranian)

   - 'perf diff' output improvements (Namhyung Kim)

   - Fix error reporting for evsel pgfault constructor (Arnaldo Carvalho
     de Melo)

  Tooling side infrastructure changes:

   - Cache eh/debug frame offset for dwarf unwind (Namhyung Kim)

   - Support parsing parameterized events (Cody P Schafer)

   - Add support for IP address formats in libtraceevent (David Ahern)

  Plus other misc fixes"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (48 commits)
  perf: Decouple unthrottling and rotating
  perf: Drop module reference on event init failure
  perf: Use POLLIN instead of POLL_IN for perf poll data in flag
  perf: Fix put_event() ctx lock
  perf: Fix move_group() order
  perf: Fix event->ctx locking
  perf: Add a bit of paranoia
  perf symbols: Convert lseek + read to pread
  perf tools: Use perf_data_file__fd() consistently
  perf symbols: Support to read compressed module from build-id cache
  perf evsel: Set attr.task bit for a tracking event
  perf header: Set header version correctly
  perf record: Show precise number of samples
  perf tools: Do not use __perf_session__process_events() directly
  perf callchain: Cache eh/debug frame offset for dwarf unwind
  perf tools: Provide stub for missing pthread_attr_setaffinity_np
  perf evsel: Don't rely on malloc working for sz 0
  tools lib traceevent: Add support for IP address formats
  perf ui/tui: Show fatal error message only if exists
  perf tests: Fix typo in sample-parsing.c
  ...
2015-02-09 15:43:55 -08:00
Linus Torvalds 4e02370f64 During testing Sedat Dilek hit a "suspicious RCU usage" splat that pointed
out a real bug. During suspend and resume the tlb_flush tracepoint is
 called when the CPU is going offline. As the CPU has been noted as offline,
 RCU is ignoring that CPU, which means that it can not use RCU protected
 locks. When tracepoints are activated, they require RCU locking, and
 if RCU is ignoring a CPU that runs a tracepoint, there is a chance that
 the tracepoint could cause corruption.
 
 The solution was to change the tracepoint into a TRACE_EVENT_CONDITION()
 which allows us to check a condition to determine if the tracepoint
 should be called or not. If the condition is not met, the rcu protected
 code will not be executed. By adding the condition
 "cpu_online(smp_processor_id())", this will prevent the RCU protected
 code from being executed if the CPU is marked offline.
 
 After adding this, another bug was discovered. As RCU checks rcu callers,
 if a rcu call is not done, there is no check (obviously). We found that
 tracepoints could be added in RCU ignored locations and not have lockdep
 complain until the tracepoint is activated. This missed places where
 tracepoints were added in places they should not have been. To fix this,
 code was added in 3.18 that if lockdep is enabled, any tracepoint will
 still call the rcu checks even if the tracepoint is not enabled. The bug
 here, is that the check does not take the CONDITION into account. As the
 condition may prevent tracepoints from being activated in RCU ignored
 areas (as the one patch does), we get false positives when we enable
 lockdep and hit a tracepoint that the condition prevents it from being
 called in a RCU ignored location. The fix for this is to add the
 CONDITION to the rcu checks, even if the tracepoint is not enabled.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJU1rQfAAoJEEjnJuOKh9ld19UH/juFLZFjpYBgtRmbCZa/54Zk
 i2Fa3U8jQe8MHHEYOjCLT9MQTYo/42btmJhr7kWKtIoUgDEli4lkOpbs+H0qar5y
 Vv9+1cLeNFQzgIE3nwV7cjAw7Jufoyzd1lstDqIQvcmzZnQ5sNyyVeigMcxGv8Ls
 4FyqzG6zCVgiDL4LyYNHdNcMr6qLs3KTFDEqp+kQreeO7R1r3ZEpq3JoWaEUgoPP
 qrYv/rqVosLBUGA0pd7RmiGOxhjeKm15qz1GkiPeeus6DDWC6bvPC8cAc/FfkXH0
 hYpoQghSZVnXGy0LzVsd44gj7tYx1FHEpYy1s8G6d5WJcNOGZ6OoZOdOZMyjPVw=
 =PeL2
 -----END PGP SIGNATURE-----

Merge tag 'trace-fixes-v3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull ftrace fixes from Steven Rostedt:
 "During testing Sedat Dilek hit a "suspicious RCU usage" splat that
  pointed out a real bug.  During suspend and resume the tlb_flush
  tracepoint is called when the CPU is going offline.  As the CPU has
  been noted as offline, RCU is ignoring that CPU, which means that it
  can not use RCU protected locks.  When tracepoints are activated, they
  require RCU locking, and if RCU is ignoring a CPU that runs a
  tracepoint, there is a chance that the tracepoint could cause
  corruption.

  The solution was to change the tracepoint into a
  TRACE_EVENT_CONDITION() which allows us to check a condition to
  determine if the tracepoint should be called or not.  If the condition
  is not met, the rcu protected code will not be executed.  By adding
  the condition "cpu_online(smp_processor_id())", this will prevent the
  RCU protected code from being executed if the CPU is marked offline.

  After adding this, another bug was discovered.  As RCU checks rcu
  callers, if a rcu call is not done, there is no check (obviously).  We
  found that tracepoints could be added in RCU ignored locations and not
  have lockdep complain until the tracepoint is activated.  This missed
  places where tracepoints were added in places they should not have
  been.  To fix this, code was added in 3.18 that if lockdep is enabled,
  any tracepoint will still call the rcu checks even if the tracepoint
  is not enabled.  The bug here, is that the check does not take the
  CONDITION into account.  As the condition may prevent tracepoints from
  being activated in RCU ignored areas (as the one patch does), we get
  false positives when we enable lockdep and hit a tracepoint that the
  condition prevents it from being called in a RCU ignored location.

  The fix for this is to add the CONDITION to the rcu checks, even if
  the tracepoint is not enabled"

* tag 'trace-fixes-v3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  x86/tlb/trace: Do not trace on CPU that is offline
  tracing: Add condition check to RCU lockdep checks
2015-02-08 18:08:14 -08:00
Steven Rostedt (Red Hat) 6c8465a82a x86/tlb/trace: Do not trace on CPU that is offline
When taking a CPU down for suspend and resume, a tracepoint may be called
when the CPU has been designated offline. As tracepoints require RCU for
protection, they must not be called if the current CPU is offline.

Unfortunately, trace_tlb_flush() is called in this scenario as was noted
by LOCKDEP:

...

 Disabling non-boot CPUs ...
 intel_pstate CPU 1 exiting

 ===============================
 smpboot: CPU 1 didn't die...
 [ INFO: suspicious RCU usage. ]
 3.19.0-rc7-next-20150204.1-iniza-small #1 Not tainted
 -------------------------------
 include/trace/events/tlb.h:35 suspicious rcu_dereference_check() usage!

 other info that might help us debug this:

 RCU used illegally from offline CPU!
 rcu_scheduler_active = 1, debug_locks = 0
 no locks held by swapper/1/0.

 stack backtrace:
 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.19.0-rc7-next-20150204.1-iniza-small #1
 Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013
  0000000000000001 ffff88011a44fe18 ffffffff817e370d 0000000000000011
  ffff88011a448290 ffff88011a44fe48 ffffffff810d6847 ffff8800c66b9600
  0000000000000001 ffff88011a44c000 ffffffff81cb3900 ffff88011a44fe78
 Call Trace:
  [<ffffffff817e370d>] dump_stack+0x4c/0x65
  [<ffffffff810d6847>] lockdep_rcu_suspicious+0xe7/0x120
  [<ffffffff810b71a5>] idle_task_exit+0x205/0x2c0
  [<ffffffff81054c4e>] play_dead_common+0xe/0x50
  [<ffffffff81054ca5>] native_play_dead+0x15/0x140
  [<ffffffff8102963f>] arch_cpu_idle_dead+0xf/0x20
  [<ffffffff810cd89e>] cpu_startup_entry+0x37e/0x580
  [<ffffffff81053e20>] start_secondary+0x140/0x150
 intel_pstate CPU 2 exiting

...

By converting the tlb_flush tracepoint to a TRACE_EVENT_CONDITION where the
condition is cpu_online(smp_processor_id()), we can avoid calling RCU protected
code when the CPU is offline.

Link: http://lkml.kernel.org/r/CA+icZUUGiGDoL5NU8RuxKzFjoLjEKRtUWx=JB8B9a0EQv-eGzQ@mail.gmail.com

Cc: stable@vger.kernel.org # 3.17+
Fixes: d17d8f9ded "x86/mm: Add tracepoints for TLB flushes"
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Suggested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Hansen <dave@sr71.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-02-07 19:34:55 -05:00
Paolo Bonzini f781951299 kvm: add halt_poll_ns module parameter
This patch introduces a new module parameter for the KVM module; when it
is present, KVM attempts a bit of polling on every HLT before scheduling
itself out via kvm_vcpu_block.

This parameter helps a lot for latency-bound workloads---in particular
I tested it with O_DSYNC writes with a battery-backed disk in the host.
In this case, writes are fast (because the data doesn't have to go all
the way to the platters) but they cannot be merged by either the host or
the guest.  KVM's performance here is usually around 30% of bare metal,
or 50% if you use cache=directsync or cache=writethrough (these
parameters avoid that the guest sends pointless flush requests, and
at the same time they are not slow because of the battery-backed cache).
The bad performance happens because on every halt the host CPU decides
to halt itself too.  When the interrupt comes, the vCPU thread is then
migrated to a new physical CPU, and in general the latency is horrible
because the vCPU thread has to be scheduled back in.

With this patch performance reaches 60-65% of bare metal and, more
important, 99% of what you get if you use idle=poll in the guest.  This
means that the tunable gets rid of this particular bottleneck, and more
work can be done to improve performance in the kernel or QEMU.

Of course there is some price to pay; every time an otherwise idle vCPUs
is interrupted by an interrupt, it will poll unnecessarily and thus
impose a little load on the host.  The above results were obtained with
a mostly random value of the parameter (500000), and the load was around
1.5-2.5% CPU usage on one of the host's core for each idle guest vCPU.

The patch also adds a new stat, /sys/kernel/debug/kvm/halt_successful_poll,
that can be used to tune the parameter.  It counts how many HLT
instructions received an interrupt during the polling period; each
successful poll avoids that Linux schedules the VCPU thread out and back
in, and may also avoid a likely trip to C1 and back for the physical CPU.

While the VM is idle, a Linux 4 VCPU VM halts around 10 times per second.
Of these halts, almost all are failed polls.  During the benchmark,
instead, basically all halts end within the polling period, except a more
or less constant stream of 50 per second coming from vCPUs that are not
running the benchmark.  The wasted time is thus very low.  Things may
be slightly different for Windows VMs, which have a ~10 ms timer tick.

The effect is also visible on Marcelo's recently-introduced latency
test for the TSC deadline timer.  Though of course a non-RT kernel has
awful latency bounds, the latency of the timer is around 8000-10000 clock
cycles compared to 20000-120000 without setting halt_poll_ns.  For the TSC
deadline timer, thus, the effect is both a smaller average latency and
a smaller variance.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-02-06 13:08:37 +01:00
Theodore Ts'o a26f49926d ext4: add optimization for the lazytime mount option
Add an optimization for the MS_LAZYTIME mount option so that we will
opportunistically write out any inodes with the I_DIRTY_TIME flag set
in a particular inode table block when we need to update some inode in
that inode table block anyway.

Also add some temporary code so that we can set the lazytime mount
option without needing a modified /sbin/mount program which can set
MS_LAZYTIME.  We can eventually make this go away once util-linux has
added support.

Google-Bug-Id: 18297052

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-05 02:45:00 -05:00
Theodore Ts'o 0ae45f63d4 vfs: add support for a lazytime mount option
Add a new mount option which enables a new "lazytime" mode.  This mode
causes atime, mtime, and ctime updates to only be made to the
in-memory version of the inode.  The on-disk times will only get
updated when (a) if the inode needs to be updated for some non-time
related change, (b) if userspace calls fsync(), syncfs() or sync(), or
(c) just before an undeleted inode is evicted from memory.

This is OK according to POSIX because there are no guarantees after a
crash unless userspace explicitly requests via a fsync(2) call.

For workloads which feature a large number of random write to a
preallocated file, the lazytime mount option significantly reduces
writes to the inode table.  The repeated 4k writes to a single block
will result in undesirable stress on flash devices and SMR disk
drives.  Even on conventional HDD's, the repeated writes to the inode
table block will trigger Adjacent Track Interference (ATI) remediation
latencies, which very negatively impact long tail latencies --- which
is a very big deal for web serving tiers (for example).

Google-Bug-Id: 18297052

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-05 02:45:00 -05:00
Joerg Roedel a20cc76b9e Merge branches 'arm/renesas', 'arm/smmu', 'arm/omap', 'ppc/pamu', 'x86/amd' and 'core' into next
Conflicts:
	drivers/iommu/Kconfig
	drivers/iommu/Makefile
2015-02-04 16:53:44 +01:00
Dave Martin 6ea22486ba tracing: Add array printing helper
If a trace event contains an array, there is currently no standard
way to format this for text output.  Drivers are currently hacking
around this by a) local hacks that use the trace_seq functionailty
directly, or b) just not printing that information.  For fixed size
arrays, formatting of the elements can be open-coded, but this gets
cumbersome for arrays of non-trivial size.

These approaches result in non-standard content of the event format
description delivered to userspace, so userland tools needs to be
taught to understand and parse each array printing method
individually.

This patch implements a __print_array() helper that tracepoint
implementations can use instead of reinventing it.  A simple C-style
syntax is used to delimit the array and its elements {like,this}.

So that the helpers can be used with large static arrays as well as
dynamic arrays, they take a pointer and element count: they can be
used with __get_dynamic_array() for use with dynamic arrays.
Link: http://lkml.kernel.org/r/1422449335-8289-2-git-send-email-javi.merino@arm.com

Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-01-28 10:34:47 -05:00
Ingo Molnar f10698ed68 Merge branch 'perf/urgent' into perf/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-28 15:42:56 +01:00
David S. Miller 95f873f2ff Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Conflicts:
	arch/arm/boot/dts/imx6sx-sdb.dts
	net/sched/cls_bpf.c

Two simple sets of overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-27 16:59:56 -08:00
Christoph Hellwig df0ce26cb4 fs: remove default_backing_dev_info
Now that default_backing_dev_info is not used for writeback purposes we can
git rid of it easily:

 - instead of using it's name for tracing unregistered bdi we just use
   "unknown"
 - btrfs and ceph can just assign the default read ahead window themselves
   like several other filesystems already do.
 - we can assign noop_backing_dev_info as the default one in alloc_super.
   All filesystems already either assigned their own or
   noop_backing_dev_info.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-01-20 14:05:38 -07:00
Christoph Hellwig de1414a654 fs: export inode_to_bdi and use it in favor of mapping->backing_dev_info
Now that we got rid of the bdi abuse on character devices we can always use
sb->s_bdi to get at the backing_dev_info for a file, except for the block
device special case.  Export inode_to_bdi and replace uses of
mapping->backing_dev_info with it to prepare for the removal of
mapping->backing_dev_info.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-01-20 14:03:04 -07:00
Shuah Khan db8614d35b iommu: Change trace unmap api to report unmapped size
Currently map and unmap are implemented as events under a
common trace class declaration. The common class forces
trace_unmap() to require a bogus physical address argument
that it doesn't use. Changing unmap to report unmapped size
will provide useful information for debugging. Remove common
map_unmap trace class and change map and unmap into separate
events as opposed to events under the same class to allow for
differences in the reporting information. In addition, map and
unmap are changed to handle size value as size_t instead of int
to match the passed size value and avoid overflow.

Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-01-19 15:19:31 +01:00
Christian Borntraeger cdef511985 KVM: fix sparse warning in include/trace/events/kvm.h
sparse complains about
include/trace/events/kvm.h:163:1: error: directive in argument list
include/trace/events/kvm.h:167:1: error: directive in argument list
include/trace/events/kvm.h:169:1: error: directive in argument list
and sparse is right. Preprocessing directives in an argument of a
macro are undefined behaviour as of C99 6.10.3p11.

Lets use an indirection to fix this.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-19 11:07:57 +01:00
Peter Zijlstra (Intel) 86038c5ea8 perf: Avoid horrible stack usage
Both Linus (most recent) and Steve (a while ago) reported that perf
related callbacks have massive stack bloat.

The problem is that software events need a pt_regs in order to
properly report the event location and unwind stack. And because we
could not assume one was present we allocated one on stack and filled
it with minimal bits required for operation.

Now, pt_regs is quite large, so this is undesirable. Furthermore it
turns out that most sites actually have a pt_regs pointer available,
making this even more onerous, as the stack space is pointless waste.

This patch addresses the problem by observing that software events
have well defined nesting semantics, therefore we can use static
per-cpu storage instead of on-stack.

Linus made the further observation that all but the scheduler callers
of perf_sw_event() have a pt_regs available, so we change the regular
perf_sw_event() to require a valid pt_regs (where it used to be
optional) and add perf_sw_event_sched() for the scheduler.

We have a scheduler specific call instead of a more generic _noregs()
like construct because we can assume non-recursion from the scheduler
and thereby simplify the code further (_noregs would have to put the
recursion context call inline in order to assertain which __perf_regs
element to use).

One last note on the implementation of perf_trace_buf_prepare(); we
allow .regs = NULL for those cases where we already have a pt_regs
pointer available and do not need another.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Javi Merino <javi.merino@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Petr Mladek <pmladek@suse.cz>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Link: http://lkml.kernel.org/r/20141216115041.GW3337@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 15:11:45 +01:00
Jiri Pirko df8a39defa net: rename vlan_tx_* helpers since "tx" is misleading there
The same macros are used for rx as well. So rename it.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13 17:51:08 -05:00
Chao Yu 2ace38e00e f2fs: cleanup parameters for trace_f2fs_submit_{read_,write_,page_,page_m}bio with fio
Cleanup parameters for trace_f2fs_submit_{read_,write_,page_,page_m}bio with fio
as one parameter.

Suggested-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-01-09 17:02:26 -08:00
Chao Yu 3e1c8f125e f2fs: cleanup trace event of f2fs_submit_page_{m,}bio with DECLARE_EVENT_CLASS
This patch adds missing parameter _type_ for trace_f2fs_submit_page_bio, then
use DECLARE_EVENT_CLASS/DEFINE_EVENT_CONDITION pair to cleanup some trace event
code related to f2fs_submit_page_{m,}bio.

Additionally, after we remove redundant code, size of code can be reduced:
   text    data     bss     dec     hex filename
 176787    8712      56  185555   2d4d3 f2fs.ko.org
 174408    8648      56  183112   2cb48 f2fs.ko

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2015-01-09 17:02:25 -08:00
Linus Torvalds cdce6ac277 SCSI for-linus on 20141220
This is a much shorter set of patches that were on the go but didn't make it
 in to the early pull request for the merge window.  It's really a set of bug
 fixes plus some final cleanup work on the new tag queue API.
 
 Signed-off-by: James Bottomley <JBottomley@Parallels.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABAgAGBQJUlaYEAAoJEDeqqVYsXL0MmXAH/2UUcE11p0KBHMR4cAn76xrG
 9093ZT9VZ4LH/Z7PbgwIWC4YHDqVpwA1+Trj1mh8PxiZz2SopWe27O2lQMRS5VUc
 MN28kbmK3L0jQj+OUez10Da6k0hU/KL8TlWT765MxFDKCaAuPZ4u541tyZEIGmLL
 olOQrn/fSlu+18QqqZ+D2rMaK7kGH6ZgbOadnRfYGkLjU4YeAMEC9L7UgnDxHiaN
 gZozoARkGeAnDJERVETRTtAiOXGRH8sGCpue0yYlhZXpAQ9cFUkS/hMqDWnaVC2S
 0x0w34RvbxSqO0gPT0K5XLoMiFyg04vnZ2xBVFBsANQTSEjQJO8USNAa4r74hf8=
 =D3eN
 -----END PGP SIGNATURE-----

Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI update from James Bottomley:
 "This is a much shorter set of patches that were on the go but didn't
  make it in to the early pull request for the merge window.  It's
  really a set of bug fixes plus some final cleanup work on the new tag
  queue API"

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  storvsc: ring buffer failures may result in I/O freeze
  ipr: set scsi_level correctly for disk arrays
  ipr: add support for async scanning to speed up boot
  scsi_debug: fix missing "break;" in SDEBUG_UA_CAPACITY_CHANGED case
  scsi_debug: take sdebug_host_list_lock when changing capacity
  scsi_debug: improve driver description in Kconfig
  scsi_debug: fix compare and write errors
  qla2xxx: fix race in handling rport deletion during recovery causes panic
  scsi: blacklist RSOC for Microsoft iSCSI target devices
  scsi: fix random memory corruption with scsi-mq + T10 PI
  Revert "[SCSI] mpt3sas: Remove phys on topology change"
  Revert "[SCSI] mpt2sas: Remove phys on topology change."
  esas2r: Correct typos of "validate" in a comment
  fc: FCP_PTA_SIMPLE is 0
  ibmvfc: remove unused tag variable
  scsi: remove MSG_*_TAG defines
  scsi: remove scsi_set_tag_type
  scsi: remove scsi_get_tag_type
  scsi: never drop to untagged mode during queue ramp down
  scsi: remove ->change_queue_type method
2014-12-20 13:42:57 -08:00
Linus Torvalds d790be3863 The exciting thing here is the getting rid of stop_machine on module
removal.  This is possible by using a simple atomic_t for the counter,
 rather than our fancy per-cpu counter: it turns out that no one is doing
 a module increment per net packet, so the slowdown should be in the noise.
 
 Also, script fixed for new git version.
 
 Cheers,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUk3cQAAoJENkgDmzRrbjxr44P/25ZBYmKZZ3XM3flt2o0LCti
 1Px+MRbWuXhueWQOYZSXOO3c2ENNuV3siaU4jQZqnxslpdvT4rVsVFkYuwva2vHT
 hqpoq1Hz++yjFJArjERFOdoZ1gxkBbZQQGYm8esToAqU3b2Z74SrU48dPwp65q/1
 r6hbXdWSiKALEBZeW2coi+QVCL/oxE8hmNqDO1mpe82aEKu0xIVpTdU5vAfBIj8/
 Z95U2bx+CjiP7khhSjBGtltLqxL6QXw1m2eg1gO9nf1gJNI0/dAY6IJmFbGz+7Bt
 CAyc9BRsB40Em8G7d7wr4FsURcLfmYNdjtx79j+Rot5PkVIi+Ztv7C1QYlMQESPa
 ESddUMySOmKlzTm50w3ZLvV1ZTRU8TjmttSkzQYZ3csCLkKUgfeL9SAxU9KGoA2l
 jFxrvDcWEHtuU1D/FeYyOofNaD/BflPfdhj4WAm9XnPPi+THEu7fulWJaIP4glHh
 8TpYNbinXuZqXO4nJ41Ad5utbSbBQa4fFBUuViWRTU0TtWJT2HVqn/XoYJ5mnPEz
 IbYh31rQDKFJKzePfscWrJ6XzoF59yGiAVcWcI3HS7aT8bFZGapAQu9mNCVu+cLF
 uRxWrukHG7d8YeYrAtbVXWfxArR155V9QJN55hQ1nKLq2M03gNvYTtAPw2yEsfuw
 u3Fk/KkV1RfaiFurjoG/
 =rDum
 -----END PGP SIGNATURE-----

Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull module updates from Rusty Russell:
 "The exciting thing here is the getting rid of stop_machine on module
  removal.  This is possible by using a simple atomic_t for the counter,
  rather than our fancy per-cpu counter: it turns out that no one is
  doing a module increment per net packet, so the slowdown should be in
  the noise"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  param: do not set store func without write perm
  params: cleanup sysfs allocation
  kernel:module Fix coding style errors and warnings.
  module: Remove stop_machine from module unloading
  module: Replace module_ref with atomic_t refcnt
  lib/bug: Use RCU list ops for module_bug_list
  module: Unlink module with RCU synchronizing instead of stop_machine
  module: Wait for RCU synchronizing before releasing a module
2014-12-18 20:55:41 -08:00
James Bottomley e617457691 Merge remote-tracking branch 'scsi-queue/drivers-for-3.19' into for-linus 2014-12-18 05:56:29 -08:00
Linus Torvalds 0b233b7c79 Merge branch 'for-3.19' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
 "A comparatively quieter cycle for nfsd this time, but still with two
  larger changes:

   - RPC server scalability improvements from Jeff Layton (using RCU
     instead of a spinlock to find idle threads).

   - server-side NFSv4.2 ALLOCATE/DEALLOCATE support from Anna
     Schumaker, enabling fallocate on new clients"

* 'for-3.19' of git://linux-nfs.org/~bfields/linux: (32 commits)
  nfsd4: fix xdr4 count of server in fs_location4
  nfsd4: fix xdr4 inclusion of escaped char
  sunrpc/cache: convert to use string_escape_str()
  sunrpc: only call test_bit once in svc_xprt_received
  fs: nfsd: Fix signedness bug in compare_blob
  sunrpc: add some tracepoints around enqueue and dequeue of svc_xprt
  sunrpc: convert to lockless lookup of queued server threads
  sunrpc: fix potential races in pool_stats collection
  sunrpc: add a rcu_head to svc_rqst and use kfree_rcu to free it
  sunrpc: require svc_create callers to pass in meaningful shutdown routine
  sunrpc: have svc_wake_up only deal with pool 0
  sunrpc: convert sp_task_pending flag to use atomic bitops
  sunrpc: move rq_cachetype field to better optimize space
  sunrpc: move rq_splice_ok flag into rq_flags
  sunrpc: move rq_dropme flag into rq_flags
  sunrpc: move rq_usedeferral flag to rq_flags
  sunrpc: move rq_local field to rq_flags
  sunrpc: add a generic rq_flags field to svc_rqst and move rq_secure to it
  nfsd: minor off by one checks in __write_versions()
  sunrpc: release svc_pool_map reference when serv allocation fails
  ...
2014-12-16 15:25:31 -08:00
Linus Torvalds 988adfdffd Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
 "Highlights:

   - AMD KFD driver merge

     This is the AMD HSA interface for exposing a lowlevel interface for
     GPGPU use.  They have an open source userspace built on top of this
     interface, and the code looks as good as it was going to get out of
     tree.

   - Initial atomic modesetting work

     The need for an atomic modesetting interface to allow userspace to
     try and send a complete set of modesetting state to the driver has
     arisen, and been suffering from neglect this past year.  No more,
     the start of the common code and changes for msm driver to use it
     are in this tree.  Ongoing work to get the userspace ioctl finished
     and the code clean will probably wait until next kernel.

   - DisplayID 1.3 and tiled monitor exposed to userspace.

     Tiled monitor property is now exposed for userspace to make use of.

   - Rockchip drm driver merged.

   - imx gpu driver moved out of staging

  Other stuff:

   - core:
        panel - MIPI DSI + new panels.
        expose suggested x/y properties for virtual GPUs

   - i915:
        Initial Skylake (SKL) support
        gen3/4 reset work
        start of dri1/ums removal
        infoframe tracking
        fixes for lots of things.

   - nouveau:
        tegra k1 voltage support
        GM204 modesetting support
        GT21x memory reclocking work

   - radeon:
        CI dpm fixes
        GPUVM improvements
        Initial DPM fan control

   - rcar-du:
        HDMI support added
        removed some support for old boards
        slave encoder driver for Analog Devices adv7511

   - exynos:
        Exynos4415 SoC support

   - msm:
        a4xx gpu support
        atomic helper conversion

   - tegra:
        iommu support
        universal plane support
        ganged-mode DSI support

   - sti:
        HDMI i2c improvements

   - vmwgfx:
        some late fixes.

   - qxl:
        use suggested x/y properties"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (969 commits)
  drm: sti: fix module compilation issue
  drm/i915: save/restore GMBUS freq across suspend/resume on gen4
  drm: sti: correctly cleanup CRTC and planes
  drm: sti: add HQVDP plane
  drm: sti: add cursor plane
  drm: sti: enable auxiliary CRTC
  drm: sti: fix delay in VTG programming
  drm: sti: prepare sti_tvout to support auxiliary crtc
  drm: sti: use drm_crtc_vblank_{on/off} instead of drm_vblank_{on/off}
  drm: sti: fix hdmi avi infoframe
  drm: sti: remove event lock while disabling vblank
  drm: sti: simplify gdp code
  drm: sti: clear all mixer control
  drm: sti: remove gpio for HDMI hot plug detection
  drm: sti: allow to change hdmi ddc i2c adapter
  drm/doc: Document drm_add_modes_noedid() usage
  drm/i915: Remove '& 0xffff' from the mask given to WA_REG()
  drm/i915: Invert the mask and val arguments in wa_add() and WA_REG()
  drm: Zero out DRM object memory upon cleanup
  drm/i915/bdw: Fix the write setting up the WIZ hashing mode
  ...
2014-12-15 15:52:01 -08:00
Linus Torvalds 9bfccec24e Lots of bugs fixes, including Zheng and Jan's extent status shrinker
fixes, which should improve CPU utilization and potential soft lockups
 under heavy memory pressure, and Eric Whitney's bigalloc fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJUiRUwAAoJENNvdpvBGATwltQP/3sjHtFw+RUvKgQ8vX9M2THk
 4b9j0ja0mrD3ObTXUxdDuOh1q09MsfSUiOYK6KZOav3nO/dRODqZnWgXz/zJt3LC
 R97s4velgzZi3F2ijnLiCo5RVZahN9xs8bUHZ85orMIr5wogwGdaUpnoqZSg0Ehr
 PIFnTNORyNXBwEm3XPjUmENTdyq9FZ8DsS6ACFzgFi79QTSyJFEM4LAl2XaqwMGV
 fVhNwnOGIyT8lHZAtDcobkaC86NjakmpW2Ip3p9/UEQtynh16UeVXKEO3K7CcQ+L
 YJRDNnSIlGpR1OJp+v6QJPUd8q4fc/8JW9AxxsLak0eqkszuB+MxoQXOCFV5AWaf
 jrs4TV3y0hCuB4OwuYUpnfcU1o+O7p39MqXMv8SA1ZBPbijN/LQSMErFtXj2oih6
 3gJHUWLwELGeR+d9JlI29zxhOeOIotX255UBgj2oasQ0X3BW3qAgQ4LmP3QY90Pm
 BUmxiMoIWB9N3kU4XQGf+Kyy8JeMLJj0frHDxI3XLz+B+IlWCCkBH6y3AD/a13kS
 HHMMLOwHGEs0lYEKsm89dkcij5GuKd8eKT8Q0+CvKD9Z6HPdYvQxoazmF87Q6j/7
 ZmshaVxtWaLpNbDaXVg+IgZifJAN0+mVzVHRhY9TSjx8k9qLdSgSEqYWjkSjx9Ij
 nNB2zVrHZDMvZ7MCZy85
 =ZrTc
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
 "Lots of bugs fixes, including Zheng and Jan's extent status shrinker
  fixes, which should improve CPU utilization and potential soft lockups
  under heavy memory pressure, and Eric Whitney's bigalloc fixes"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (26 commits)
  ext4: ext4_da_convert_inline_data_to_extent drop locked page after error
  ext4: fix suboptimal seek_{data,hole} extents traversial
  ext4: ext4_inline_data_fiemap should respect callers argument
  ext4: prevent fsreentrance deadlock for inline_data
  ext4: forbid journal_async_commit in data=ordered mode
  jbd2: remove unnecessary NULL check before iput()
  ext4: Remove an unnecessary check for NULL before iput()
  ext4: remove unneeded code in ext4_unlink
  ext4: don't count external journal blocks as overhead
  ext4: remove never taken branch from ext4_ext_shift_path_extents()
  ext4: create nojournal_checksum mount option
  ext4: update comments regarding ext4_delete_inode()
  ext4: cleanup GFP flags inside resize path
  ext4: introduce aging to extent status tree
  ext4: cleanup flag definitions for extent status tree
  ext4: limit number of scanned extents in status tree shrinker
  ext4: move handling of list of shrinkable inodes into extent status code
  ext4: change LRU to round-robin in extent status tree shrinker
  ext4: cache extent hole in extent status tree for ext4_da_map_blocks()
  ext4: fix block reservation for bigalloc filesystems
  ...
2014-12-12 09:28:03 -08:00
Linus Torvalds bae41e45b7 sound updates for 3.19-rc1
This became a fairly large pull request.  In addition to the usual
 driver updates / fixes, there have been a high amount of cleanups in
 ASoC area, as well as control API helpers and kernel documentations
 fixes touching through the whole tree.
 
 In the driver side, the biggest changes are the support for new Intel
 SoC found on new x86 machines, and the updates of FireWire dice and
 oxfw drivers.
 
 Some remarkable items are below:
 
 * ALSA core
  - PCM mmap code cleanup, removal of arch-dependent codes
  - PCM xrun injection support
  - PCM hwptr tracepoint support
  - Refactoring of snd_pcm_action(), simplification of PCM locking
  - Robustified sequecner auto-load functionality
  - New control API helpers and lots of cleanups along with them
  - Lots of kerneldoc fixes and cleanups
 
 * USB-audio
  - The mixer resume code was largely rewritten, and the devices with
    quirks are resumed properly.
  - New hardware support: Focusrite Scarlett, Digidesign Mbox1,
    Denon/Marantz DACs, Zoom R16/24
 
 * FireWire
  - DICE driver updates with better duplex and sync support, including
    MIDI support
  - New OXFW driver for Oxford Semiconductor FW970/971 chipset,
    including the previous LaCie Speakers device.  Fullduplex and MIDI
    support included as well as DICE driver.
 
 * HD-audio
  - Refactoring the driver-caps quirk handling in snd-hda-intel
  - More consistent control names representing the topology better
  - Fixups: HP mute LED with ALC268 codec, Ideapad S210 built-in mic
    fix, ASUS Z99He laptop EAPD
 
 * ASoC
  - Conversion of AC'97 drivers to use regmap, bringing us closer to
    the removal of the ASoC level I/O code
  - Clean up a lot of old drivers that were open coding things that
    have subsequently been implemented in the core
  - Some DAPM performance improvements
  - Removal of the now seldom used CODEC mutex
  - Lots of updates for the newer Intel SoC support, including support
    for the DSP and some Cherrytrail and Braswell machine drivers
  - Support for Samsung boards using rt5631 as the CODEC
  - Removal of the obsolete AFEB9260 machine driver
  - Driver support for the TI TS3A227E headset driver used in some
    Chrombeooks
 
 * Others
  - ASIHPI driver update and cleanups
  - Lots of dev_*() printk conversions
  - Lots of trivial cleanups for the codes spotted by Coccinelle
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJUiYaqAAoJEGwxgFQ9KSmkeo0P/2aDx2w8iVi8n7Og/7VBubkm
 VZkk08IOpP3h1ojyQRsBQPI0H5AquqQTZN1TJUDcy+6PD9vckYYcag9JWhA+0RBr
 I+BfTMLB3E4umIkzOjxeoyOzheL7GoZ+eZYEm8DkAhaue+cFhjNJz+S6g8ENkxJ9
 lSjErXQxyiowc39I0v1WBZcuq6glX1psEsVup9U8m7KhNx6lexj28A2MkqicW4hs
 DZE6pYrk57W7y3+/NWxaBiglrItvScBAPpPqoyDm9zuDNTmAtGjf1uMRmRyHe30Z
 iunHXki8Fc2yBBapmfYrcLC2jyIyZykcxniF8Hd4nXUvddisFUEFFhNmB6v392d0
 4/NXSqTnsq48vm0Ezjia2LySWKZZVQtam8t9262BKHcosKYObxirekD6vijSoWO8
 ZWoXa+U1oWSFEoOAFDsu6GFqFHFRi5VhqBgIaPEIxrT2MQGHL3KU1bp8CJi/5CTU
 pNh0wC9SMtnSJJXBIP/nYH81WQxaik3c4eiHFPN4+0McBZQiIaIqMG6x+iiVNvPB
 MNLLVAzk0QiWeCmSo8OBdjOV0/T+pfQ7lrTCn2B1jdJi1CkAO8m2SwQrG4PpRx8k
 lUTBd4zTx5DYR+yPF69OyoCQg0XKjW9g62Qo5rmxrQreiidROZOBS1bljWzIPeft
 otupLmK5kz67n3eB2eto
 =sB6v
 -----END PGP SIGNATURE-----

Merge tag 'sound-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "This became a fairly large pull request.  In addition to the usual
  driver updates / fixes, there have been a high amount of cleanups in
  ASoC area, as well as control API helpers and kernel documentations
  fixes touching through the whole tree.

  In the driver side, the biggest changes are the support for new Intel
  SoC found on new x86 machines, and the updates of FireWire dice and
  oxfw drivers.

  Some remarkable items are below:

  ALSA core:
   - PCM mmap code cleanup, removal of arch-dependent codes
   - PCM xrun injection support
   - PCM hwptr tracepoint support
   - Refactoring of snd_pcm_action(), simplification of PCM locking
   - Robustified sequecner auto-load functionality
   - New control API helpers and lots of cleanups along with them
   - Lots of kerneldoc fixes and cleanups

  USB-audio:
   - The mixer resume code was largely rewritten, and the devices with
     quirks are resumed properly.
   - New hardware support: Focusrite Scarlett, Digidesign Mbox1,
     Denon/Marantz DACs, Zoom R16/24

  FireWire:
   - DICE driver updates with better duplex and sync support, including
     MIDI support
   - New OXFW driver for Oxford Semiconductor FW970/971 chipset,
     including the previous LaCie Speakers device.  Fullduplex and MIDI
     support included as well as DICE driver.

  HD-audio:
   - Refactoring the driver-caps quirk handling in snd-hda-intel
   - More consistent control names representing the topology better
   - Fixups: HP mute LED with ALC268 codec, Ideapad S210 built-in mic
     fix, ASUS Z99He laptop EAPD

  ASoC:
   - Conversion of AC'97 drivers to use regmap, bringing us closer to
     the removal of the ASoC level I/O code
   - Clean up a lot of old drivers that were open coding things that
     have subsequently been implemented in the core
   - Some DAPM performance improvements
   - Removal of the now seldom used CODEC mutex
   - Lots of updates for the newer Intel SoC support, including support
     for the DSP and some Cherrytrail and Braswell machine drivers
   - Support for Samsung boards using rt5631 as the CODEC
   - Removal of the obsolete AFEB9260 machine driver
   - Driver support for the TI TS3A227E headset driver used in some
     Chrombeooks

  Others:
   - ASIHPI driver update and cleanups
   - Lots of dev_*() printk conversions
   - Lots of trivial cleanups for the codes spotted by Coccinelle"

* tag 'sound-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (594 commits)
  ALSA: pcxhr: NULL dereference on probe failure
  ALSA: lola: NULL dereference on probe failure
  ALSA: hda - Add "eapd" model string for AD1986A codec
  ALSA: hda - Add EAPD fixup for ASUS Z99He laptop
  ALSA: oxfw: Add hwdep interface
  ALSA: oxfw: Add support for capture/playback MIDI messages
  ALSA: oxfw: add support for capturing PCM samples
  ALSA: oxfw: Add support AMDTP in-stream
  ALSA: oxfw: Add support for Behringer/Mackie devices
  ALSA: oxfw: Change the way to start stream
  ALSA: oxfw: Add proc interface for debugging purpose
  ALSA: oxfw: Change the way to make PCM rules/constraints
  ALSA: oxfw: Add support for AV/C stream format command to get/set supported stream formation
  ALSA: oxfw: Change the way to name card
  ALSA: dice: Add support for MIDI capture/playback
  ALSA: dice: Add support for capturing PCM samples
  ALSA: dice: Support for non SYT-Match sampling clock source mode
  ALSA: dice: Add support for duplex streams with synchronization
  ALSA: dice: Change the way to start stream
  ALSA: jack: Add dummy snd_jack_set_key() definition
  ...
2014-12-11 13:20:50 -08:00
Linus Torvalds 1dd7dcb6ea There was a lot of clean ups and minor fixes. One of those clean ups was
to the trace_seq code. It also removed the return values to the
 trace_seq_*() functions and use trace_seq_has_overflowed() to see if
 the buffer filled up or not. This is similar to work being done to the
 seq_file code as well in another tree.
 
 Some of the other goodies include:
 
  o Added some "!" (NOT) logic to the tracing filter.
 
  o Fixed the frame pointer logic to the x86_64 mcount trampolines
 
  o Added the logic for dynamic trampolines on !CONFIG_PREEMPT systems.
    That is, the ftrace trampoline can be dynamically allocated
    and be called directly by functions that only have a single hook
    to them.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUhbLGAAoJEEjnJuOKh9ldRV4H/3NcLbgGB2iu96la1zdYE6pG
 Q7cDJMxXK80YIIL70h9G0IItcD4t62LMb72lfBnMGRj3msgFb3AgISW57EuI0Pxk
 xk24wuIPoTG2S7v9sc3SboNFwO8qbtIjxD2OBmqIUrGo2sZIiGjyj3gX7mCY3uzL
 WB2bUOSFz/22OgaANinR5EELHA3pZZCf54Vz1K9ndmtK0xp0j1a7xJShD6TrMdYv
 mZ3zH5ViIhW4A3mdcMceh6fy2JLQAiEKF0uPTvcMMz7NlVul0mxyL/+10P7AE/3R
 Ehw4fzmm4NDshPDtBOkKH0LsppgXzuItFuQUTpact3JlqTg++bV6onSsrkt1hlY=
 =Z7Cm
 -----END PGP SIGNATURE-----

Merge tag 'trace-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:
 "There was a lot of clean ups and minor fixes.  One of those clean ups
  was to the trace_seq code.  It also removed the return values to the
  trace_seq_*() functions and use trace_seq_has_overflowed() to see if
  the buffer filled up or not.  This is similar to work being done to
  the seq_file code as well in another tree.

  Some of the other goodies include:

   - Added some "!" (NOT) logic to the tracing filter.

   - Fixed the frame pointer logic to the x86_64 mcount trampolines

   - Added the logic for dynamic trampolines on !CONFIG_PREEMPT systems.
     That is, the ftrace trampoline can be dynamically allocated and be
     called directly by functions that only have a single hook to them"

* tag 'trace-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (55 commits)
  tracing: Truncated output is better than nothing
  tracing: Add additional marks to signal very large time deltas
  Documentation: describe trace_buf_size parameter more accurately
  tracing: Allow NOT to filter AND and OR clauses
  tracing: Add NOT to filtering logic
  ftrace/fgraph/x86: Have prepare_ftrace_return() take ip as first parameter
  ftrace/x86: Get rid of ftrace_caller_setup
  ftrace/x86: Have save_mcount_regs macro also save stack frames if needed
  ftrace/x86: Add macro MCOUNT_REG_SIZE for amount of stack used to save mcount regs
  ftrace/x86: Simplify save_mcount_regs on getting RIP
  ftrace/x86: Have save_mcount_regs store RIP in %rdi for first parameter
  ftrace/x86: Rename MCOUNT_SAVE_FRAME and add more detailed comments
  ftrace/x86: Move MCOUNT_SAVE_FRAME out of header file
  ftrace/x86: Have static tracing also use ftrace_caller_setup
  ftrace/x86: Have static function tracing always test for function graph
  kprobes: Add IPMODIFY flag to kprobe_ftrace_ops
  ftrace, kprobes: Support IPMODIFY flag to find IP modify conflict
  kprobes/ftrace: Recover original IP if pre_handler doesn't change it
  tracing/trivial: Fix typos and make an int into a bool
  tracing: Deletion of an unnecessary check before iput()
  ...
2014-12-10 19:58:13 -08:00
Linus Torvalds e20db597b6 NFS client updates for Linux 3.19
Highlights include:
 
 Features:
 - NFSv4.2 client support for hole punching and preallocation.
 - Further RPC/RDMA client improvements.
 - Add more RPC transport debugging tracepoints.
 - Add RPC debugging tools in debugfs.
 
 Bugfixes:
 - Stable fix for layoutget error handling
 - Fix a change in COMMIT behaviour resulting from the recent io code updates
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUhRVTAAoJEGcL54qWCgDyfeUP/RoFo3ImTMbGxfcPJqoELjcO
 lZbQ+27pOE/whFDkWgiOVTwlgGct5a0WRo7GCZmpYJA4q1kmSv4ngTb3nMTCUztt
 xMJ0mBr0BqttVs+ouKiVPm3cejQXedEhttwWcloIXS8lNenlpL29Zlrx2NHdU8UU
 13+souocj0dwIyTYYS/4Lm9KpuCYnpDBpP5ShvQjVaMe/GxJo6GyZu70c7FgwGNz
 Nh9onzZV3mz1elhfizlV38aVA7KWVXtLWIqOFIKlT2fa4nWB8Hc07miR5UeOK0/h
 r+icnF2qCQe83MbjOxYNxIKB6uiA/4xwVc90X4AQ7F0RX8XPWHIQWG5tlkC9jrCQ
 3RGzYshWDc9Ud2mXtLMyVQxHVVYlFAe1WtdP8ZWb1oxDInmhrarnWeNyECz9xGKu
 VzIDZzeq9G8slJXATWGRfPsYr+Ihpzcen4QQw58cakUBcqEJrYEhlEOfLovM71k3
 /S/jSHBAbQqiw4LPMw87bA5A6+ZKcVSsNE0XCtNnhmqFpLc1kKRrl5vaN+QMk5tJ
 v4/zR0fPqH7SGAJWYs4brdfahyejEo0TwgpDs7KHmu1W9zQ0LCVTaYnQuUmQjta6
 WyYwIy3TTibdfR191O0E3NOW82Q/k/NBD6ySvabN9HqQ9eSk6+rzrWAslXCbYohb
 BJfzcQfDdx+lsyhjeTx9
 =wOP3
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-3.19-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

  Features:
   - NFSv4.2 client support for hole punching and preallocation.
   - Further RPC/RDMA client improvements.
   - Add more RPC transport debugging tracepoints.
   - Add RPC debugging tools in debugfs.

  Bugfixes:
   - Stable fix for layoutget error handling
   - Fix a change in COMMIT behaviour resulting from the recent io code
     updates"

* tag 'nfs-for-3.19-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (28 commits)
  sunrpc: add a debugfs rpc_xprt directory with an info file in it
  sunrpc: add debugfs file for displaying client rpc_task queue
  nfs: Add DEALLOCATE support
  nfs: Add ALLOCATE support
  NFS: Clean up nfs4_init_callback()
  NFS: SETCLIENTID XDR buffer sizes are incorrect
  SUNRPC: serialize iostats updates
  xprtrdma: Display async errors
  xprtrdma: Enable pad optimization
  xprtrdma: Re-write rpcrdma_flush_cqs()
  xprtrdma: Refactor tasklet scheduling
  xprtrdma: unmap all FMRs during transport disconnect
  xprtrdma: Cap req_cqinit
  xprtrdma: Return an errno from rpcrdma_register_external()
  nfs: define nfs_inc_fscache_stats and using it as possible
  nfs: replace nfs_add_stats with nfs_inc_stats when add one
  NFS: Deletion of unnecessary checks before the function call "nfs_put_client"
  sunrpc: eliminate RPC_TRACEPOINTS
  sunrpc: eliminate RPC_DEBUG
  lockd: eliminate LOCKD_DEBUG
  ...
2014-12-10 15:13:13 -08:00
Linus Torvalds 86c6a2fddf Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
 "The main changes in this cycle are:

   - 'Nested Sleep Debugging', activated when CONFIG_DEBUG_ATOMIC_SLEEP=y.

     This instruments might_sleep() checks to catch places that nest
     blocking primitives - such as mutex usage in a wait loop.  Such
     bugs can result in hard to debug races/hangs.

     Another category of invalid nesting that this facility will detect
     is the calling of blocking functions from within schedule() ->
     sched_submit_work() -> blk_schedule_flush_plug().

     There's some potential for false positives (if secondary blocking
     primitives themselves are not ready yet for this facility), but the
     kernel will warn once about such bugs per bootup, so the warning
     isn't much of a nuisance.

     This feature comes with a number of fixes, for problems uncovered
     with it, so no messages are expected normally.

   - Another round of sched/numa optimizations and refinements, for
     CONFIG_NUMA_BALANCING=y.

   - Another round of sched/dl fixes and refinements.

  Plus various smaller fixes and cleanups"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
  sched: Add missing rcu protection to wake_up_all_idle_cpus
  sched/deadline: Introduce start_hrtick_dl() for !CONFIG_SCHED_HRTICK
  sched/numa: Init numa balancing fields of init_task
  sched/deadline: Remove unnecessary definitions in cpudeadline.h
  sched/cpupri: Remove unnecessary definitions in cpupri.h
  sched/deadline: Fix rq->dl.pushable_tasks bug in push_dl_task()
  sched/fair: Fix stale overloaded status in the busiest group finding logic
  sched: Move p->nr_cpus_allowed check to select_task_rq()
  sched/completion: Document when to use wait_for_completion_io_*()
  sched: Update comments about CLONE_NEWUTS and CLONE_NEWIPC
  sched/fair: Kill task_struct::numa_entry and numa_group::task_list
  sched: Refactor task_struct to use numa_faults instead of numa_* pointers
  sched/deadline: Don't check CONFIG_SMP in switched_from_dl()
  sched/deadline: Reschedule from switched_from_dl() after a successful pull
  sched/deadline: Push task away if the deadline is equal to curr during wakeup
  sched/deadline: Add deadline rq status print
  sched/deadline: Fix artificial overrun introduced by yield_task_dl()
  sched/rt: Clean up check_preempt_equal_prio()
  sched/core: Use dl_bw_of() under rcu_read_lock_sched()
  sched: Check if we got a shallowest_idle_cpu before searching for least_loaded_cpu
  ...
2014-12-09 21:21:34 -08:00
Linus Torvalds c30110608c Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
 "These are the main changes in this cycle:

    - Streamline RCU's use of per-CPU variables, shifting from "cpu"
      arguments to functions to "this_"-style per-CPU variable
      accessors.

    - signal-handling RCU updates.

    - real-time updates.

    - torture-test updates.

    - miscellaneous fixes.

    - documentation updates"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
  rcu: Fix FIXME in rcu_tasks_kthread()
  rcu: More info about potential deadlocks with rcu_read_unlock()
  rcu: Optimize cond_resched_rcu_qs()
  rcu: Add sparse check for RCU_INIT_POINTER()
  documentation: memory-barriers.txt: Correct example for reorderings
  documentation: Add atomic_long_t to atomic_ops.txt
  documentation: Additional restriction for control dependencies
  documentation: Document RCU self test boot params
  rcutorture: Fix rcu_torture_cbflood() memory leak
  rcutorture: Remove obsolete kversion param in kvm.sh
  rcutorture: Remove stale test configurations
  rcutorture: Enable RCU self test in configs
  rcutorture: Add early boot self tests
  torture: Run Linux-kernel binary out of results directory
  cpu: Avoid puts_pending overflow
  rcu: Remove "cpu" argument to rcu_cleanup_after_idle()
  rcu: Remove "cpu" argument to rcu_prepare_for_idle()
  rcu: Remove "cpu" argument to rcu_needs_cpu()
  rcu: Remove "cpu" argument to rcu_note_context_switch()
  rcu: Remove "cpu" argument to rcu_preempt_check_callbacks()
  ...
2014-12-09 20:23:19 -08:00
Jeff Layton 83a712e0af sunrpc: add some tracepoints around enqueue and dequeue of svc_xprt
These were useful when I was tracking down a race condition between
svc_xprt_do_enqueue and svc_get_next_xprt.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-12-09 11:29:14 -05:00
Jeff Layton b1691bc03d sunrpc: convert to lockless lookup of queued server threads
Testing has shown that the pool->sp_lock can be a bottleneck on a busy
server. Every time data is received on a socket, the server must take
that lock in order to dequeue a thread from the sp_threads list.

Address this problem by eliminating the sp_threads list (which contains
threads that are currently idle) and replacing it with a RQ_BUSY flag in
svc_rqst. This allows us to walk the sp_all_threads list under the
rcu_read_lock and find a suitable thread for the xprt by doing a
test_and_set_bit.

Note that we do still have a potential atomicity problem however with
this approach.  We don't want svc_xprt_do_enqueue to set the
rqst->rq_xprt pointer unless a test_and_set_bit of RQ_BUSY returned
zero (which indicates that the thread was idle). But, by the time we
check that, the bit could be flipped by a waking thread.

To address this, we acquire a new per-rqst spinlock (rq_lock) and take
that before doing the test_and_set_bit. If that returns false, then we
can set rq_xprt and drop the spinlock. Then, when the thread wakes up,
it must set the bit under the same spinlock and can trust that if it was
already set then the rq_xprt is also properly set.

With this scheme, the case where we have an idle thread no longer needs
to take the highly contended pool->sp_lock at all, and that removes the
bottleneck.

That still leaves one issue: What of the case where we walk the whole
sp_all_threads list and don't find an idle thread? Because the search is
lockess, it's possible for the queueing to race with a thread that is
going to sleep. To address that, we queue the xprt and then search again.

If we find an idle thread at that point, we can't attach the xprt to it
directly since that might race with a different thread waking up and
finding it.  All we can do is wake the idle thread back up and let it
attempt to find the now-queued xprt.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Chris Worley <chris.worley@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-12-09 11:22:22 -05:00
Jeff Layton 812443865c sunrpc: add a rcu_head to svc_rqst and use kfree_rcu to free it
...also make the manipulation of sp_all_threads list use RCU-friendly
functions.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Chris Worley <chris.worley@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-12-09 11:22:22 -05:00
Jeff Layton 779fb0f3af sunrpc: move rq_splice_ok flag into rq_flags
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-12-09 11:22:21 -05:00
Jeff Layton 78b65eb3fd sunrpc: move rq_dropme flag into rq_flags
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-12-09 11:22:20 -05:00
Jeff Layton 30660e04b0 sunrpc: move rq_usedeferral flag to rq_flags
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-12-09 11:22:20 -05:00
Jeff Layton 7501cc2bcf sunrpc: move rq_local field to rq_flags
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-12-09 11:21:21 -05:00
Jeff Layton 4d152e2c9a sunrpc: add a generic rq_flags field to svc_rqst and move rq_secure to it
In a later patch, we're going to need some atomic bit flags. Since that
field will need to be an unsigned long, we mitigate that space
consumption by migrating some other bitflags to the new field. Start
with the rq_secure flag.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-12-09 11:21:20 -05:00
Mark Brown 3ee3f45463 Merge remote-tracking branch 'asoc/topic/cache' into asoc-next 2014-12-08 13:11:44 +00:00
Christoph Hellwig 68d81f4004 scsi: remove MSG_*_TAG defines
For SPI drivers use the message definitions from scsi.h, and for target
drivers introduce a new TCM_*_TAG namespace.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com
2014-12-04 09:58:33 +01:00
Zheng Liu edaa53cac8 ext4: change LRU to round-robin in extent status tree shrinker
In this commit we discard the lru algorithm for inodes with extent
status tree because it takes significant effort to maintain a lru list
in extent status tree shrinker and the shrinker can take a long time to
scan this lru list in order to reclaim some objects.

We replace the lru ordering with a simple round-robin.  After that we
never need to keep a lru list.  That means that the list needn't be
sorted if the shrinker can not reclaim any objects in the first round.

Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-11-25 11:45:37 -05:00
Zheng Liu 2f8e0a7c6c ext4: cache extent hole in extent status tree for ext4_da_map_blocks()
Currently extent status tree doesn't cache extent hole when a write
looks up in extent tree to make sure whether a block has been allocated
or not.  In this case, we don't put extent hole in extent cache because
later this extent might be removed and a new delayed extent might be
added back.  But it will cause a defect when we do a lot of writes.  If
we don't put extent hole in extent cache, the following writes also need
to access extent tree to look at whether or not a block has been
allocated.  It brings a cache miss.  This commit fixes this defect.
Also if the inode doesn't have any extent, this extent hole will be
cached as well.

Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-11-25 11:44:37 -05:00
Jan Kara cbd7584e6e ext4: fix block reservation for bigalloc filesystems
For bigalloc filesystems we have to check whether newly requested inode
block isn't already part of a cluster for which we already have delayed
allocation reservation. This check happens in ext4_ext_map_blocks() and
that function sets EXT4_MAP_FROM_CLUSTER if that's the case. However if
ext4_da_map_blocks() finds in extent cache information about the block,
we don't call into ext4_ext_map_blocks() and thus we always end up
getting new reservation even if the space for cluster is already
reserved. This results in overreservation and premature ENOSPC reports.

Fix the problem by checking for existing cluster reservation already in
ext4_da_map_blocks(). That simplifies the logic and actually allows us
to get rid of the EXT4_MAP_FROM_CLUSTER flag completely.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-11-25 11:41:49 -05:00
Hannes Reinecke eb846d9f14 scsi: rename SERVICE_ACTION_IN to SERVICE_ACTION_IN_16
SPC-3 defines SERVICE ACTION IN(12) and SERVICE ACTION IN(16).
So rename SERVICE_ACTION_IN to SERVICE_ACTION_IN_16 to be
consistent with SPC and to allow for better distinction.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Tested-by: Robert Elliott <elliott@hp.com>
Reviewed-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-11-24 20:01:40 +01:00
Jeff Layton 1a867a0898 sunrpc: add tracepoints in xs_tcp_data_recv
Add tracepoints inside the main loop on xs_tcp_data_recv that allow
us to keep an eye on what's happening during each phase of it.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-24 12:53:35 -05:00
Jeff Layton 3705ad64f1 sunrpc: add new tracepoints in xprt handling code
...so we can keep track of when calls are sent and replies received.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-24 12:53:35 -05:00
Jeff Layton 860a0d9e51 sunrpc: add some tracepoints in svc_rqst handling functions
...just around svc_send, svc_recv and svc_process for now.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-24 12:53:34 -05:00
Ingo Molnar d360b78f99 Merge branch 'rcu/next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull RCU updates from Paul E. McKenney:

 - Streamline RCU's use of per-CPU variables, shifting from "cpu"
   arguments to functions to "this_"-style per-CPU variable accessors.

 - Signal-handling RCU updates.

 - Real-time updates.

 - Torture-test updates.

 - Miscellaneous fixes.

 - Documentation updates.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-11-20 08:57:58 +01:00
Steven Rostedt (Red Hat) 8e2e095cbe tracing: Fix return value of ftrace_raw_output_prep()
If the trace_seq of ftrace_raw_output_prep() is full this function
returns TRACE_TYPE_PARTIAL_LINE, otherwise it returns zero.

The problem is that TRACE_TYPE_PARTIAL_LINE happens to be zero!

The thing is, the caller of ftrace_raw_output_prep() expects a
success to be zero. Change that to expect it to be
TRACE_TYPE_HANDLED.

Link: http://lkml.kernel.org/r/20141114112522.GA2988@dhcp128.suse.cz

Reminded-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-19 15:25:48 -05:00
Steven Rostedt (Red Hat) 19a7fe2062 tracing: Add trace_seq_has_overflowed() and trace_handle_return()
Adding a trace_seq_has_overflowed() which returns true if the trace_seq
had too much written into it allows us to simplify the code.

Instead of checking the return value of every call to trace_seq_printf()
and friends, they can all be called normally, and at the end we can
return !trace_seq_has_overflowed() instead.

Several functions also return TRACE_TYPE_PARTIAL_LINE when the trace_seq
overflowed and TRACE_TYPE_HANDLED otherwise. Another helper function
was created called trace_handle_return() which takes a trace_seq and
returns these enums. Using this helper function also simplifies the
code.

This change also makes it possible to remove the return values of
trace_seq_printf() and friends. They should instead just be
void functions.

Link: http://lkml.kernel.org/r/20141114011410.365183157@goodmis.org

Reviewed-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-19 15:25:39 -05:00
Ingo Molnar e9ac5f0fa8 Merge branch 'sched/urgent' into sched/core, to pick up fixes before applying more changes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-11-16 10:50:25 +01:00
Dave Airlie b0654103f5 drm/tegra: Changes for v3.19-rc1
The highlights in this pull request are:
 
   * IOMMU support: The Tegra DRM driver can now deal with discontiguous
     buffers if an IOMMU exists in the system. That means it can allocate
     using drm_gem_get_pages() and will map them into IOVA space via the
     IOMMU API. Similarly, non-contiguous PRIME buffers can be imported
     from a different driver, which allows better integration with gk20a
     (nouveau) and less hacks.
 
   * Universal planes: This is precursory work for atomic modesetting and
     will allow hardware cursor support to be implemented on pre-Tegra114
     where RGB cursors were not supported.
 
   * DSI ganged-mode support: The DSI controller can now gang up with a
     second DSI controller to drive high resolution DSI panels.
 
 Besides those bigger changes there is a slew of fixes, cleanups, plugged
 memory leaks and so on.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJUZM29AAoJEN0jrNd/PrOhd1EP/iGBGppcPiYhFI6CC2V5IyGO
 j4GaNU656QQj0RNS3RH0Oby0oHdQum2rFNtHnkGYjoXFiSznId3OwVQ1+Y1s5804
 BkPSR1Q3fyIfsQdGA9DEkVGuyavCEbJ9yOalIBLda456nxfkPFBJdNjq5AJDT2N1
 J54MSRtV3fV5Uerd7WbmiNdLyuly4Gyyb7ApotOQEsfYvaGgobdpMRGyp38tvYbD
 pNDZ69iYBSJmaVaF1a/NxFw3/25CSHakY5J95R9eXK1Y3BKDBhqHo7b1L1XMt1L5
 yKEy+eqjnnB7/itszjKG3dnMHunKsch9C+nyxR4xKMf036Pesz65tMbg07Pd0cIy
 oYZMDGdm380d0mu41LydN7zK/ZZf6bBfcZallnxk1CSEQB6BcMZhOmQP2aa8r9rU
 VdaNGlNio7XAjVGDsd8Y652y27NH7VJTpx3nxXB0f7eyGg7AlfLKxOFehDE+beVJ
 OAzRQrHJ63vOIAUg21G84W4cvpsVSG4FomgRTXC8Se6WcwP3TWD5MmOzLYNjbFnb
 ayuIiIfNtyu2KJU60hCOqWQg05UcWIYRkvxmdnQQcFyItmw4qJzh9ep7ebAqTx0t
 0p0y5/O7KGYKS1pB7o1XJtL84N7SPiNGB3fdwiGryl9Z7hypuhKS7/lRBDTiiTAd
 Ok1HHSRDxTaiGhrN3TKH
 =v4QW
 -----END PGP SIGNATURE-----

Merge tag 'drm/tegra/for-3.19-rc1' of git://people.freedesktop.org/~tagr/linux into drm-next

drm/tegra: Changes for v3.19-rc1

The highlights in this pull request are:

  * IOMMU support: The Tegra DRM driver can now deal with discontiguous
    buffers if an IOMMU exists in the system. That means it can allocate
    using drm_gem_get_pages() and will map them into IOVA space via the
    IOMMU API. Similarly, non-contiguous PRIME buffers can be imported
    from a different driver, which allows better integration with gk20a
    (nouveau) and less hacks.

  * Universal planes: This is precursory work for atomic modesetting and
    will allow hardware cursor support to be implemented on pre-Tegra114
    where RGB cursors were not supported.

  * DSI ganged-mode support: The DSI controller can now gang up with a
    second DSI controller to drive high resolution DSI panels.

Besides those bigger changes there is a slew of fixes, cleanups, plugged
memory leaks and so on.

* tag 'drm/tegra/for-3.19-rc1' of git://people.freedesktop.org/~tagr/linux: (44 commits)
  drm/tegra: gem: Check before freeing CMA memory
  drm/tegra: fb: Add error codes to error messages
  drm/tegra: fb: Properly release GEM objects on failure
  drm/tegra: Detach panel when a connector is removed
  drm/tegra: Plug memory leak
  drm/tegra: gem: Use more consistent data types
  drm/tegra: fb: Do not destroy framebuffer
  drm/tegra: gem: dumb: pitch and size are outputs
  drm/tegra: Enable the hotplug interrupt only when necessary
  drm/tegra: dc: Universal plane support
  drm/tegra: dc: Registers are 32 bits wide
  drm/tegra: dc: Factor out DC, window and cursor commit
  drm/tegra: Add IOMMU support
  drm/tegra: Fix error handling cleanup
  drm/tegra: gem: Use dma_mmap_writecombine()
  drm/tegra: gem: Remove redundant drm_gem_free_mmap_offset()
  drm/tegra: gem: Cleanup tegra_bo_create_with_handle()
  drm/tegra: gem: Extract tegra_bo_alloc_object()
  drm/tegra: dsi: Set up PHY_TIMING & BTA_TIMING registers earlier
  drm/tegra: dsi: Replace 1000000 by USEC_PER_SEC
  ...
2014-11-15 09:38:55 +10:00
Thierry Reding b40d02bf96 gpu: host1x: Use struct host1x_bo pointers in traces
Rather than cast to a u32 use the struct host1x_bo pointers directly.
This avoid annoying warnings for 64-bit builds.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 16:11:32 +01:00
Masami Hiramatsu 2f35c41f58 module: Replace module_ref with atomic_t refcnt
Replace module_ref per-cpu complex reference counter with
an atomic_t simple refcnt. This is for code simplification.

Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-11-11 17:07:46 +10:30
Lars-Peter Clausen 427d204c86 ASoC: Remove snd_soc_cache_sync() implementation
This function has no more non regmap user, which means we can remove the
implementation of the function and associated functions and structure
fields.

For convenience we keep a static inline version of the function that
forwards calls to regcache_sync() unconditionally.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-09 09:06:30 +00:00
Ingo Molnar 21ee24bf5b Merge branch 'urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/urgent
Pull two RCU fixes from Paul E. McKenney:

" - Complete the work of commit dd56af42bd (rcu: Eliminate deadlock
    between CPU hotplug and expedited grace periods), which was
    intended to allow synchronize_sched_expedited() to be safely
    used when holding locks acquired by CPU-hotplug notifiers.
    This commit makes the put_online_cpus() avoid the deadlock
    instead of just handling the get_online_cpus().

  - Complete the work of commit 35ce7f29a4 (rcu: Create rcuo
    kthreads only for onlined CPUs), which was intended to allow
    RCU to avoid allocating unneeded kthreads on systems where the
    firmware says that there are more CPUs than are really present.
    This commit makes rcu_barrier() aware of the mismatch, so that
    it doesn't hang waiting for non-existent CPUs. "

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-10-30 07:37:37 +01:00
Pranith Kumar 28f6569ab7 rcu: Remove redundant TREE_PREEMPT_RCU config option
PREEMPT_RCU and TREE_PREEMPT_RCU serve the same function after
TINY_PREEMPT_RCU has been removed. This patch removes TREE_PREEMPT_RCU
and uses PREEMPT_RCU config option in its place.

Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-10-29 10:20:05 -07:00
Paul E. McKenney d7e2993396 rcu: Make rcu_barrier() understand about missing rcuo kthreads
Commit 35ce7f29a4 (rcu: Create rcuo kthreads only for onlined CPUs)
avoids creating rcuo kthreads for CPUs that never come online.  This
fixes a bug in many instances of firmware: Instead of lying about their
age, these systems instead lie about the number of CPUs that they have.
Before commit 35ce7f29a4, this could result in huge numbers of useless
rcuo kthreads being created.

It appears that experience indicates that I should have told the
people suffering from this problem to fix their broken firmware, but
I instead produced what turned out to be a partial fix.   The missing
piece supplied by this commit makes sure that rcu_barrier() knows not to
post callbacks for no-CBs CPUs that have not yet come online, because
otherwise rcu_barrier() will hang on systems having firmware that lies
about the number of CPUs.

It is tempting to simply have rcu_barrier() refuse to post a callback on
any no-CBs CPU that does not have an rcuo kthread.  This unfortunately
does not work because rcu_barrier() is required to wait for all pending
callbacks.  It is therefore required to wait even for those callbacks
that cannot possibly be invoked.  Even if doing so hangs the system.

Given that posting a callback to a no-CBs CPU that does not yet have an
rcuo kthread can hang rcu_barrier(), It is tempting to report an error
in this case.  Unfortunately, this will result in false positives at
boot time, when it is perfectly legal to post callbacks to the boot CPU
before the scheduler has started, in other words, before it is legal
to invoke rcu_barrier().

So this commit instead has rcu_barrier() avoid posting callbacks to
CPUs having neither rcuo kthread nor pending callbacks, and has it
complain bitterly if it finds CPUs having no rcuo kthread but some
pending callbacks.  And when rcu_barrier() does find CPUs having no rcuo
kthread but pending callbacks, as noted earlier, it has no choice but
to hang indefinitely.

Reported-by: Yanko Kaneti <yaneti@declera.com>
Reported-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Reported-by: Meelis Roos <mroos@linux.ee>
Reported-by: Eric B Munson <emunson@akamai.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Eric B Munson <emunson@akamai.com>
Tested-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Tested-by: Yanko Kaneti <yaneti@declera.com>
Tested-by: Kevin Fenzi <kevin@scrye.com>
Tested-by: Meelis Roos <mroos@linux.ee>
2014-10-28 13:24:13 -07:00
Oleg Nesterov 8f9fbf092c sched: Fix the PREEMPT_ACTIVE check in __trace_sched_switch_state()
task_preempt_count() has nothing to do with the actual preempt counter,
thread_info->saved_preempt_count is only valid right after switch_to().

__trace_sched_switch_state() can use preempt_count(), prev is still the
current task when trace_sched_switch() is called.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
[ Added BUG_ON(). ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20141007195108.GB28002@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-10-28 10:47:53 +01:00
Linus Torvalds 8264fce6de Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal management updates from Zhang Rui:
 "Sorry that I missed the merge window as there is a bug found in the
  last minute, and I have to fix it and wait for the code to be tested
  in linux-next tree for a few days.  Now the buggy patch has been
  dropped entirely from my next branch.  Thus I hope those changes can
  still be merged in 3.18-rc2 as most of them are platform thermal
  driver changes.

  Specifics:

   - introduce ACPI INT340X thermal drivers.

     Newer laptops and tablets may have thermal sensors and other
     devices with thermal control capabilities that are exposed for the
     OS to use via the ACPI INT340x device objects.  Several drivers are
     introduced to expose the temperature information and cooling
     ability from these objects to user-space via the normal thermal
     framework.

     From: Lu Aaron, Lan Tianyu, Jacob Pan and Zhang Rui.

   - introduce a new thermal governor, which just uses a hysteresis to
     switch abruptly on/off a cooling device.  This governor can be used
     to control certain fan devices that can not be throttled but just
     switched on or off.  From: Peter Feuerer.

   - introduce support for some new thermal interrupt functions on
     i.MX6SX, in IMX thermal driver.  From: Anson, Huang.

   - introduce tracing support on thermal framework.  From: Punit
     Agrawal.

   - small fixes in OF thermal and thermal step_wise governor"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (25 commits)
  Thermal: int340x thermal: select ACPI fan driver
  Thermal: int3400_thermal: use acpi_thermal_rel parsing APIs
  Thermal: int340x_thermal: expose acpi thermal relationship tables
  Thermal: introduce int3403 thermal driver
  Thermal: introduce INT3402 thermal driver
  Thermal: move the KELVIN_TO_MILLICELSIUS macro to thermal.h
  ACPI / Fan: support INT3404 thermal device
  ACPI / Fan: add ACPI 4.0 style fan support
  ACPI / fan: convert to platform driver
  ACPI / fan: use acpi_device_xxx_power instead of acpi_bus equivelant
  ACPI / fan: remove no need check for device pointer
  ACPI / fan: remove unused macro
  Thermal: int3400 thermal: register to thermal framework
  Thermal: int3400 thermal: add capability to detect supporting UUIDs
  Thermal: introduce int3400 thermal driver
  ACPI: add ACPI_TYPE_LOCAL_REFERENCE support to acpi_extract_package()
  ACPI: make acpi_create_platform_device() an external API
  thermal: step_wise: fix: Prevent from binary overflow when trend is dropping
  ACPI: introduce ACPI int340x thermal scan handler
  thermal: Added Bang-bang thermal governor
  ...
2014-10-24 11:21:43 -07:00
Linus Torvalds c2661b8060 A large number of cleanups and bug fixes, with some (minor) journal
optimizations.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJUPlLCAAoJENNvdpvBGATwpN8P/jnbDL1RqM9ZEAWfbDhvYumR
 Fi59b3IDzSJHuuJeP0nTblVbbWclpO9ljCd18ttsHr8gBXA0ViaEU0XvWbpHIwPN
 1fr1/Ovd0wvBdIVdLlaLXTR9skH4lbkiXxv/tkfjVCOSpzqiKID98Z72e/gUjB7Z
 8xjAn/mTCnXKnhqMGzi8RC2MP1wgY//ErR21bj6so/8RC8zu4P6JuVj/hI6s0y5i
 IPtAmjhdM7nxnS0wJwj7dLT0yNDftDh69qE6CgIwyK+Xn/SZFgYwE6+l02dj3DET
 ZcAzTT9ToTMJdWtMu+5Y4LY8ObJ5xqMPbMoUclQ3DWe6nZicvtcBVCjfG/J8pFlY
 IFD0nfh/OpX9cQMwJ+5Y8P4TrMiqM+FfuLfu+X83gLyrAyIazwoaZls2lxlEyC0w
 M25oAqeKGUeVakVlmDZlVyBf05cu5m62x1rRvpcwMXMNhJl8/xwsSdhdYGeJfbO0
 0MfL1n6GmvHvouMXKNsXlat/w3QVaQWVRzqdF9x7Q730fSHC/zxVGO+Po3jz2fBd
 fBdfE14BIIU7nkyBVy0CZG5SDmQW4YACocOv/ATmII9j76F9eZQ3zsA8J1x+dLmJ
 dP1Uxvsn1C3HW8Ua239j0XUJncglb06iEId0ywdkmWcc1rbzsyZ/NzXN/QBdZmqB
 9g4GKAXAyh15PeBTJ5K/
 =vWic
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
 "A large number of cleanups and bug fixes, with some (minor) journal
  optimizations"

[ This got sent to me before -rc1, but was stuck in my spam folder.   - Linus ]

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (67 commits)
  ext4: check s_chksum_driver when looking for bg csum presence
  ext4: move error report out of atomic context in ext4_init_block_bitmap()
  ext4: Replace open coded mdata csum feature to helper function
  ext4: delete useless comments about ext4_move_extents
  ext4: fix reservation overflow in ext4_da_write_begin
  ext4: add ext4_iget_normal() which is to be used for dir tree lookups
  ext4: don't orphan or truncate the boot loader inode
  ext4: grab missed write_count for EXT4_IOC_SWAP_BOOT
  ext4: optimize block allocation on grow indepth
  ext4: get rid of code duplication
  ext4: fix over-defensive complaint after journal abort
  ext4: fix return value of ext4_do_update_inode
  ext4: fix mmap data corruption when blocksize < pagesize
  vfs: fix data corruption when blocksize < pagesize for mmaped data
  ext4: fold ext4_nojournal_sops into ext4_sops
  ext4: support freezing ext2 (nojournal) file systems
  ext4: fold ext4_sync_fs_nojournal() into ext4_sync_fs()
  ext4: don't check quota format when there are no quota files
  jbd2: simplify calling convention around __jbd2_journal_clean_checkpoint_list
  jbd2: avoid pointless scanning of checkpoint lists
  ...
2014-10-20 09:50:11 -07:00
Linus Torvalds d6dd50e07c Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
 "The main changes in this cycle were:

   - changes related to No-CBs CPUs and NO_HZ_FULL

   - RCU-tasks implementation

   - torture-test updates

   - miscellaneous fixes

   - locktorture updates

   - RCU documentation updates"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (81 commits)
  workqueue: Use cond_resched_rcu_qs macro
  workqueue: Add quiescent state between work items
  locktorture: Cleanup header usage
  locktorture: Cannot hold read and write lock
  locktorture: Fix __acquire annotation for spinlock irq
  locktorture: Support rwlocks
  rcu: Eliminate deadlock between CPU hotplug and expedited grace periods
  locktorture: Document boot/module parameters
  rcutorture: Rename rcutorture_runnable parameter
  locktorture: Add test scenario for rwsem_lock
  locktorture: Add test scenario for mutex_lock
  locktorture: Make torture scripting account for new _runnable name
  locktorture: Introduce torture context
  locktorture: Support rwsems
  locktorture: Add infrastructure for torturing read locks
  torture: Address race in module cleanup
  locktorture: Make statistics generic
  locktorture: Teach about lock debugging
  locktorture: Support mutexes
  locktorture: Add documentation
  ...
2014-10-13 15:44:12 +02:00
Linus Torvalds ef4a48c513 File locking related changes for v3.18 (pile #1)
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUNZK4AAoJEAAOaEEZVoIVI08P/iM7eaIVRnqaqtWw/JBzxiba
 EMDlJYUBSlv6lYk9s8RJT4bMmcmGAKSYzVAHSoPahzNcqTDdFLeDTLGxJ8uKBbjf
 d1qRRdH1yZHGUzCvJq3mEendjfXn435Y3YburUxjLfmzrzW7EbMvndiQsS5dhAm9
 PEZ+wrKF/zFL7LuXa1YznYrbqOD/GRsJAXGEWc3kNwfS9avephVG/RI3GtpI2PJj
 RY1mf8P7+WOlrShYoEuUo5aqs01MnU70LbqGHzY8/QKH+Cb0SOkCHZPZyClpiA+G
 MMJ+o2XWcif3BZYz+dobwz/FpNZ0Bar102xvm2E8fqByr/T20JFjzooTKsQ+PtCk
 DetQptrU2gtyZDKtInJUQSDPrs4cvA13TW+OEB1tT8rKBnmyEbY3/TxBpBTB9E6j
 eb/V3iuWnywR3iE+yyvx24Qe7Pov6deM31s46+Vj+GQDuWmAUJXemhfzPtZiYpMT
 exMXTyDS3j+W+kKqHblfU5f+Bh1eYGpG2m43wJVMLXKV7NwDf8nVV+Wea962ga+w
 BAM3ia4JRVgRWJBPsnre3lvGT5kKPyfTZsoG+kOfRxiorus2OABoK+SIZBZ+c65V
 Xh8VH5p3qyCUBOynXlHJWFqYWe2wH0LfbPrwe9dQwTwON51WF082EMG5zxTG0Ymf
 J2z9Shz68zu0ok8cuSlo
 =Hhee
 -----END PGP SIGNATURE-----

Merge tag 'locks-v3.18-1' of git://git.samba.org/jlayton/linux

Pull file locking related changes from Jeff Layton:
 "This release is a little more busy for file locking changes than the
  last:

   - a set of patches from Kinglong Mee to fix the lockowner handling in
     knfsd
   - a pile of cleanups to the internal file lease API.  This should get
     us a bit closer to allowing for setlease methods that can block.

  There are some dependencies between mine and Bruce's trees this cycle,
  and I based my tree on top of the requisite patches in Bruce's tree"

* tag 'locks-v3.18-1' of git://git.samba.org/jlayton/linux: (26 commits)
  locks: fix fcntl_setlease/getlease return when !CONFIG_FILE_LOCKING
  locks: flock_make_lock should return a struct file_lock (or PTR_ERR)
  locks: set fl_owner for leases to filp instead of current->files
  locks: give lm_break a return value
  locks: __break_lease cleanup in preparation of allowing direct removal of leases
  locks: remove i_have_this_lease check from __break_lease
  locks: move freeing of leases outside of i_lock
  locks: move i_lock acquisition into generic_*_lease handlers
  locks: define a lm_setup handler for leases
  locks: plumb a "priv" pointer into the setlease routines
  nfsd: don't keep a pointer to the lease in nfs4_file
  locks: clean up vfs_setlease kerneldoc comments
  locks: generic_delete_lease doesn't need a file_lock at all
  nfsd: fix potential lease memory leak in nfs4_setlease
  locks: close potential race in lease_get_mtime
  security: make security_file_set_fowner, f_setown and __f_setown void return
  locks: consolidate "nolease" routines
  locks: remove lock_may_read and lock_may_write
  lockd: rip out deferred lock handling from testlock codepath
  NFSD: Get reference of lockowner when coping file_lock
  ...
2014-10-11 13:21:34 -04:00
Linus Torvalds 90d0c376f5 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs updates from Chris Mason:
 "The largest set of changes here come from Miao Xie.  He's cleaning up
  and improving read recovery/repair for raid, and has a number of
  related fixes.

  I've merged another set of fsync fixes from Filipe, and he's also
  improved the way we handle metadata write errors to make sure we force
  the FS readonly if things go wrong.

  Otherwise we have a collection of fixes and cleanups.  Dave Sterba
  gets a cookie for removing the most lines (thanks Dave)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (139 commits)
  btrfs: Fix compile error when CONFIG_SECURITY is not set.
  Btrfs: fix compiles when CONFIG_BTRFS_FS_RUN_SANITY_TESTS is off
  btrfs: Make btrfs handle security mount options internally to avoid losing security label.
  Btrfs: send, don't delay dir move if there's a new parent inode
  btrfs: add more superblock checks
  Btrfs: fix race in WAIT_SYNC ioctl
  Btrfs: be aware of btree inode write errors to avoid fs corruption
  Btrfs: remove redundant btrfs_verify_qgroup_counts declaration.
  btrfs: fix shadow warning on cmp
  Btrfs: fix compilation errors under DEBUG
  Btrfs: fix crash of btrfs_release_extent_buffer_page
  Btrfs: add missing end_page_writeback on submit_extent_page failure
  btrfs: Fix the wrong condition judgment about subset extent map
  Btrfs: fix build_backref_tree issue with multiple shared blocks
  Btrfs: cleanup error handling in build_backref_tree
  btrfs: move checks for DUMMY_ROOT into a helper
  btrfs: new define for the inline extent data start
  btrfs: kill extent_buffer_page helper
  btrfs: drop constant param from btrfs_release_extent_buffer_page
  btrfs: hide typecast to definition of BTRFS_SEND_TRANS_STUB
  ...
2014-10-11 08:03:52 -04:00
Linus Torvalds a2ce35273c sound updates for 3.18-rc1
This time it's a relatively calm update batch, but the amount isn't
 too small in the end.  Here we go over some highlights:
 
 - ALSA core
   - One major change is the support of nonatomic PCM operations.
     This allows the trigger and other callbacks to call schedule(),
     which would be useful for mailbox type communications.  Already
     some drivers (Digigram ones) have been converted to use together
     with threaded irqs as an example.
   - Improvement / fixes of DSD PCM format support
 
 - HD-audio
   - Large volume of rewrites are found in Realtek codec driver for
     converting Dell and HP quirks to generic forms.
   - Inverted dmic code cleanup from David.
   - Realtek COEF access has been optimized.
   - Now HD-audio jack infrastructure allows multiple callbacks, which
     fixes / simplifies the jack-dependent power controls on STAC/IDT
     and VIA codecs.
   - Many additional device-specific fixups as usual
   - A few deadcode cleanups, CA0132 code cleanup, etc.
 
 - ASoC
   - More componentization work from Lars-Peter, this time mainly
     cleaning up the suspend and bias level transition callbacks.
   - Real system support for the Intel drivers and a bunch of fixes
     and enhancements for the associated CODEC drivers, this is going
     to need a lot quirks over time due to the lack of any firmware
     description of the boards.
   - Jack detect support for simple card from Dylan Reid.
   - A bunch of small fixes and enhancements for the Freescale
     drivers.
   - New drivers for Analog Devices SSM4567, Cirrus Logic CS35L32,
     Everest Semiconductor ES8328 and Freescale cards using the ASRC
     in newer i.MX processors.
   - A few simple-card fixes, mostly cleanups but also a fix for
   - interaction between GPIO 0 and simple-card.
 
 - Misc
   - Virtuoso / Oxygen updates by Clemens
   - USB-audio: Yamaha MOTIF XF MIDI port name fixes
   - Conversion of kernel messages to standard dev_*() in ctxfi
     driver.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJUNrU8AAoJEGwxgFQ9KSmkxZYQAI7DgkrCx2S1dIHij99jtJGz
 FjhFSO/x8Jj0lgXkoCLRHXFgtq3iYjbyS9s0aokIpvAewD9SreVE977DsMqqZVJz
 9FPOkv4keuxyJZ46mxJpYswDeazCjEYNFVbkYHhwsCiiyce8HyWMpe38tWrQfwSV
 loJYbnEfjpTxFc4JPaQK3pIICRofQCZJonWv20K25pm7L8yG29jtqFsMQWjDCONb
 ZVNwnvW61gl6ouuHincGGqVtj8pmkgKlU0l0bMgRNflRqRusrpQdobW56OEoM13H
 Tq7xMp5Yxzg7j9sM/QzL+VAksHc1u1aBzg8XZKXjk9PsmH26h1gq98W2BDKQkMzF
 U7MQaUks4x+apJcVVDoi5+15AOsyGoxNq9ahc0fe4ADTMSe94or78GaKptWMR+NK
 pA2pX2zwvool4TYj+AtcK8SNwfVeBjSua9eNnNpaNTKuwPIX6Vch0O6jaEbQZSaC
 92JYhqiC6HsW5tbhN3afTmeHxelBCpQfWPLVtgEl/eIhY3B72/1ZXWCCqwY+Ur8E
 D3OCtuAjFnzvzr/gdHZWEnMu3HGt/xqOMVE0EHTQWokQpX2E3IF724YcttAzQakw
 wS1ppeWSO5l+TkplqcqurEA7Bq1mN6bO/q9UK+iduIiYmvtNI3fDPTlXXy2SxRUz
 QuIEpsIKuZFFumFksQd9
 =S4IQ
 -----END PGP SIGNATURE-----

Merge tag 'sound-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "This time it's a relatively calm update batch, but the amount isn't
  too small in the end.  Here we go over some highlights:

  ALSA core:
   - One major change is the support of nonatomic PCM operations.  This
     allows the trigger and other callbacks to call schedule(), which
     would be useful for mailbox type communications.  Already some
     drivers (Digigram ones) have been converted to use together with
     threaded irqs as an example.
   - Improvement / fixes of DSD PCM format support

  HD-audio:
   - Large volume of rewrites are found in Realtek codec driver for
     converting Dell and HP quirks to generic forms.
   - Inverted dmic code cleanup from David.
   - Realtek COEF access has been optimized.
   - Now HD-audio jack infrastructure allows multiple callbacks, which
     fixes / simplifies the jack-dependent power controls on STAC/IDT
     and VIA codecs.
   - Many additional device-specific fixups as usual
   - A few deadcode cleanups, CA0132 code cleanup, etc.

  ASoC:
   - More componentization work from Lars-Peter, this time mainly
     cleaning up the suspend and bias level transition callbacks.
   - Real system support for the Intel drivers and a bunch of fixes and
     enhancements for the associated CODEC drivers, this is going to
     need a lot quirks over time due to the lack of any firmware
     description of the boards.
   - Jack detect support for simple card from Dylan Reid.
   - A bunch of small fixes and enhancements for the Freescale drivers.
   - New drivers for Analog Devices SSM4567, Cirrus Logic CS35L32,
     Everest Semiconductor ES8328 and Freescale cards using the ASRC in
     newer i.MX processors.
   - A few simple-card fixes, mostly cleanups but also a fix for
     interaction between GPIO 0 and simple-card.

  Misc:
   - Virtuoso / Oxygen updates by Clemens
   - USB-audio: Yamaha MOTIF XF MIDI port name fixes
   - Conversion of kernel messages to standard dev_*() in ctxfi driver"

* tag 'sound-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (251 commits)
  ASoC: mc13783: Ensure we only try to dereference valid of_nodes
  ASoC: rockchip-i2s: fix infinite loop in rockchip_snd_txctrl
  ALSA: hda - Add dock port support to Thinkpad L440 (71aa:501e)
  ALSA: Allow pass NULL dev for snd_pci_quirk_lookup()
  ASoC: imx-es8328: Fix of_node_put() call with uninitialized object
  ASoC: soc-pcm: fix sig_bits determination in soc_pcm_apply_msb()
  ASoC: simple-card: Initialize headphone and mic GPIO numbers
  ASoC: imx-es8328: Fix missing return code in imx_es8328_probe()
  ALSA: hda - Add dock support for Thinkpad T440 (17aa:2212)
  ALSA: usb: caiaq: check for cdev->n_streams > 1
  ASoC: 88pm860x-codec: Fix possibly missing string termination
  ASoC: core: fix use after free in snd_soc_remove_platform()
  ASoC: soc-dapm: fix use after free
  ALSA: hda - Make the inv dmic handling for Realtek use generic parser
  ALSA: hda - Add Inverted Internal mic for Samsung Ativ book 9 (NP900X3G)
  ALSA: hda - Add inverted internal mic for Asus Aspire 4830T
  ASoC: Intel: byt-rt5640: fix coccinelle warnings
  ASoC: fsl_esai doc: Add "fsl,vf610-esai" as compatible string
  ASoC: da732x: Remove unnecessary KERN_ERR in pr_err()
  ASoC: simple-card: Fix detect gpio documentation.
  ...
2014-10-10 22:13:25 -04:00
Linus Torvalds da01e61428 Merge tag 'f2fs-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
 "This patch-set introduces a couple of new features such as large
  sector size, FITRIM, and atomic/volatile writes.

  Several patches enhance power-off recovery and checkpoint routines.

  The fsck.f2fs starts to support fixing corrupted partitions with
  recovery hints provided by this patch-set.

  Summary:
   - retain some recovery information for fsck.f2fs
   - enhance checkpoint speed
   - enhance flush command management
   - bug fix for lseek
   - tune in-place-update policies
   - enhance roll-forward speed
   - revisit all the roll-forward and fsync rules
   - support larget sector size
   - support FITRIM
   - support atomic and volatile writes

  And several clean-ups and bug fixes are included"

* tag 'f2fs-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (42 commits)
  f2fs: support volatile operations for transient data
  f2fs: support atomic writes
  f2fs: remove unused return value
  f2fs: clean up f2fs_ioctl functions
  f2fs: potential shift wrapping buf in f2fs_trim_fs()
  f2fs: call f2fs_unlock_op after error was handled
  f2fs: check the use of macros on block counts and addresses
  f2fs: refactor flush_nat_entries to remove costly reorganizing ops
  f2fs: introduce FITRIM in f2fs_ioctl
  f2fs: introduce cp_control structure
  f2fs: use more free segments until SSR is activated
  f2fs: change the ipu_policy option to enable combinations
  f2fs: fix to search whole dirty segmap when get_victim
  f2fs: fix to clean previous mount option when remount_fs
  f2fs: skip punching hole in special condition
  f2fs: support large sector size
  f2fs: fix to truncate blocks past EOF in ->setattr
  f2fs: update i_size when __allocate_data_block
  f2fs: use MAX_BIO_BLOCKS(sbi)
  f2fs: remove redundant operation during roll-forward recovery
  ...
2014-10-08 12:53:15 -04:00
Linus Torvalds e4e65676f2 Fixes and features for 3.18.
Apart from the usual cleanups, here is the summary of new features:
 
 - s390 moves closer towards host large page support
 
 - PowerPC has improved support for debugging (both inside the guest and
   via gdbstub) and support for e6500 processors
 
 - ARM/ARM64 support read-only memory (which is necessary to put firmware
   in emulated NOR flash)
 
 - x86 has the usual emulator fixes and nested virtualization improvements
   (including improved Windows support on Intel and Jailhouse hypervisor
   support on AMD), adaptive PLE which helps overcommitting of huge guests.
   Also included are some patches that make KVM more friendly to memory
   hot-unplug, and fixes for rare caching bugs.
 
 Two patches have trivial mm/ parts that were acked by Rik and Andrew.
 
 Note: I will soon switch to a subkey for signing purposes.  To verify
 future signed pull requests from me, please update my key with
 "gpg --recv-keys 9B4D86F2".  You should see 3 new subkeys---the
 one for signing will be a 2048-bit RSA key, 4E6B09D7.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJUL5sPAAoJEBvWZb6bTYbyfkEP/3MNhSyn6HCjPjtjLNPAl9KL
 WpExZSUFL2+4CztpdGIsek1BeJYHmqv3+c5S+WvaWVA1aqh2R7FT1D1ErBLjgLQq
 lq23IOr+XxmC3dXQUEEk+TlD+283UzypzEG4l4UD3JYg79fE3UrXAz82SeyewJDY
 x7aPYhkZG3RHu+wAyMPasG6E3zS5LySdUtGWbiPwz5BejrhBJoJdeb2WIL/RwnUK
 7ppSLB5EoFj/uMkuyeAAdAbdfSrhHA6faDZxNdxS9k9wGutrhhfUoQ49ONrKG4dV
 sFo1tSPTVgRs8QFYUZ2fJUPBAmUVddsgqh2K9d0NftGTq7b8YszaCsfFrs2/Y4MU
 YxssWEhxsfszerCu12bbAJrv6JBZYQ7TwGvI9L7P0iFU6IVw/djmukU4AkM9/e91
 YS/cue/PN+9Pn2ccXzL9J7xRtZb8FsOuRsCXTCmbOwDkLmrKPDBN2t3RUbeF+Eam
 ABrpWnLKX13kZSo4LKU+/niarzmPMp7odQfHVdr8ea0fiYLp4iN8puA20WaSPIgd
 CLvm+RAvXe5Lm91L4mpFotJ2uFyK6QlIYJV4FsgeWv/0D0qppWQi0Utb/aCNHCgy
 z8MyUMD48y7EpoQrFYr/7cddXIu0/NegnM8I1coVjIPEk4NfeebGUlCJ/V3D8wMG
 BgEfS2x6jRc5zB3hjwDr
 =iEVi
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
 "Fixes and features for 3.18.

  Apart from the usual cleanups, here is the summary of new features:

   - s390 moves closer towards host large page support

   - PowerPC has improved support for debugging (both inside the guest
     and via gdbstub) and support for e6500 processors

   - ARM/ARM64 support read-only memory (which is necessary to put
     firmware in emulated NOR flash)

   - x86 has the usual emulator fixes and nested virtualization
     improvements (including improved Windows support on Intel and
     Jailhouse hypervisor support on AMD), adaptive PLE which helps
     overcommitting of huge guests.  Also included are some patches that
     make KVM more friendly to memory hot-unplug, and fixes for rare
     caching bugs.

  Two patches have trivial mm/ parts that were acked by Rik and Andrew.

  Note: I will soon switch to a subkey for signing purposes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (157 commits)
  kvm: do not handle APIC access page if in-kernel irqchip is not in use
  KVM: s390: count vcpu wakeups in stat.halt_wakeup
  KVM: s390/facilities: allow TOD-CLOCK steering facility bit
  KVM: PPC: BOOK3S: HV: CMA: Reserve cma region only in hypervisor mode
  arm/arm64: KVM: Report correct FSC for unsupported fault types
  arm/arm64: KVM: Fix VTTBR_BADDR_MASK and pgd alloc
  kvm: Fix kvm_get_page_retry_io __gup retval check
  arm/arm64: KVM: Fix set_clear_sgi_pend_reg offset
  kvm: x86: Unpin and remove kvm_arch->apic_access_page
  kvm: vmx: Implement set_apic_access_page_addr
  kvm: x86: Add request bit to reload APIC access page address
  kvm: Add arch specific mmu notifier for page invalidation
  kvm: Rename make_all_cpus_request() to kvm_make_all_cpus_request() and make it non-static
  kvm: Fix page ageing bugs
  kvm/x86/mmu: Pass gfn and level to rmapp callback.
  x86: kvm: use alternatives for VMCALL vs. VMMCALL if kernel text is read-only
  kvm: x86: use macros to compute bank MSRs
  KVM: x86: Remove debug assertion of non-PAE reserved bits
  kvm: don't take vcpu mutex for obviously invalid vcpu ioctls
  kvm: Faults which trigger IO release the mmap_sem
  ...
2014-10-08 05:27:39 -04:00
Jeff Layton 0efaa7e82f locks: generic_delete_lease doesn't need a file_lock at all
Ensure that it's OK to pass in a NULL file_lock double pointer on
a F_UNLCK request and convert the vfs_setlease F_UNLCK callers to
do just that.

Finally, turn the BUG_ON in generic_setlease into a WARN_ON_ONCE
with an error return. That's a problem we can handle without
crashing the box if it occurs.

Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2014-10-07 14:06:12 -04:00
Mark Brown 97c53e26f0 Merge remote-tracking branch 'asoc/topic/core' into asoc-next 2014-10-06 12:48:52 +01:00
Jaegeuk Kim 4b2fecc846 f2fs: introduce FITRIM in f2fs_ioctl
This patch introduces FITRIM in f2fs_ioctl.
In this case, f2fs will issue small discards and prefree discards as many as
possible for the given area.

Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-30 15:06:09 -07:00
Jaegeuk Kim 75ab4cb830 f2fs: introduce cp_control structure
This patch add a new data structure to control checkpoint parameters.
Currently, it presents the reason of checkpoint such as is_umount and normal
sync.

Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-30 15:01:28 -07:00
Anatol Pomozov e03f73a01f ASoC: trace: Remove trailing new-lines in trace messages
These new-lines add empty lines to trace output

Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-25 14:05:58 +01:00
Andres Lagar-Cavilla 8a9522d2fe kvm/x86/mmu: Pass gfn and level to rmapp callback.
Callbacks don't have to do extra computation to learn what the caller
(lvm_handle_hva_range()) knows very well. Useful for
debugging/tracing/printk/future.

Signed-off-by: Andres Lagar-Cavilla <andreslc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-24 14:07:57 +02:00
Ingo Molnar 6273143359 Merge branch 'rcu/next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull the v3.18 RCU changes from Paul E. McKenney:

"
  * Update RCU documentation.  These were posted to LKML at
    https://lkml.org/lkml/2014/8/28/378.

  * Miscellaneous fixes.  These were posted to LKML at
    https://lkml.org/lkml/2014/8/28/386.  An additional fix that
    eliminates a documented (but now inconvenient) deadlock between
    RCU hotplug and expedited grace periods was posted at
    https://lkml.org/lkml/2014/8/28/573.

  * Changes related to No-CBs CPUs and NO_HZ_FULL.  These were posted
    to LKML at https://lkml.org/lkml/2014/8/28/412.

  * Torture-test updates.  These were posted to LKML at
    https://lkml.org/lkml/2014/8/28/546 and at
    https://lkml.org/lkml/2014/9/11/1114.

  * RCU-tasks implementation.  These were posted to LKML at
    https://lkml.org/lkml/2014/8/28/540.
"

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-09-23 07:21:42 +02:00
Liu Bo 254a2d14fa Btrfs: fix wrong parse of extent map's tracepoint
The tracepoint of extent map doesn't parse @flag correctly, we set @flag via
set_bit(), so we need to parse it on a bit bias.

Also add the missing flag, EXTENT_FLAG_FS_MAPPING.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-09-18 07:14:47 -07:00
Liu Bo b7831b20f3 Btrfs: show real function name in btrfs workqueue tracepoint
Use %pf instead of %p, just same as kernel workqueue tracepoints.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
2014-09-17 13:38:18 -07:00
Liu Bo 1a76e4ba5b Btrfs: cleanup for btrfs workqueue tracepoints
Tracepoint trace_btrfs_normal_work_done never has an user, just cleanup it.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-09-17 13:37:52 -07:00
Liu Bo b38a62586f Btrfs: add work_struct information for workqueue tracepoint
Kernel workqueue's tracepoints print the address of work_struct, while btrfs
workqueue's tracepoints print the address of btrfs_work.

We need a connection between this two, for example when debuging, we usually
grep an address in the trace output.  So it'd be better to also print
work_struct in btrfs workqueue's tracepoint.

Please note that we can only add this into those tracepoints whose work is still
available in memory because we need to reference the work.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-09-17 13:37:51 -07:00
Mark Fasheh d3982100ba btrfs: add trace for qgroup accounting
We want this to debug qgroup changes on live systems.

Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-09-17 13:37:50 -07:00
Zhang Haoyu 184564efae kvm: ioapic: conditionally delay irq delivery duringeoi broadcast
Currently, we call ioapic_service() immediately when we find the irq is still
active during eoi broadcast. But for real hardware, there's some delay between
the EOI writing and irq delivery.  If we do not emulate this behavior, and
re-inject the interrupt immediately after the guest sends an EOI and re-enables
interrupts, a guest might spend all its time in the ISR if it has a broken
handler for a level-triggered interrupt.

Such livelock actually happens with Windows guests when resuming from
hibernation.

As there's no way to recognize the broken handle from new raised ones, this patch
delays an interrupt if 10.000 consecutive EOIs found that the interrupt was
still high.  The guest can then make a little forward progress, until a proper
IRQ handler is set or until some detection routine in the guest (such as
Linux's note_interrupt()) recognizes the situation.

Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Zhang Haoyu <zhanghy@sangfor.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-16 14:44:48 +02:00
Paul E. McKenney 9fdd3bc900 rcu: Break more call_rcu() deadlock involving scheduler and perf
Commit 96d3fd0d31 (rcu: Break call_rcu() deadlock involving scheduler
and perf) covered the case where __call_rcu_nocb_enqueue() needs to wake
the rcuo kthread due to the queue being initially empty, but did not
do anything for the case where the queue was overflowing.  This commit
therefore also defers wakeup for the overflow case.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-09-07 16:18:17 -07:00
Masanari Iida e793c0f70e net: treewide: Fix typo found in DocBook/networking.xml
This patch fix spelling typo found in DocBook/networking.xml.
It is because the neworking.xml is generated from comments
in the source, I have to fix typo in comments within the source.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-05 17:35:28 -07:00
Zheng Liu eb68d0e2fc ext4: track extent status tree shrinker delay statictics
This commit adds some statictics in extent status tree shrinker.  The
purpose to add these is that we want to collect more details when we
encounter a stall caused by extent status tree shrinker.  Here we count
the following statictics:
  stats:
    the number of all objects on all extent status trees
    the number of reclaimable objects on lru list
    cache hits/misses
    the last sorted interval
    the number of inodes on lru list
  average:
    scan time for shrinking some objects
    the number of shrunk objects
  maximum:
    the inode that has max nr. of objects on lru list
    the maximum scan time for shrinking some objects

The output looks like below:
  $ cat /proc/fs/ext4/sda1/es_shrinker_info
  stats:
    28228 objects
    6341 reclaimable objects
    5281/631 cache hits/misses
    586 ms last sorted interval
    250 inodes on lru list
  average:
    153 us scan time
    128 shrunk objects
  maximum:
    255 inode (255 objects, 198 reclaimable)
    125723 us max scan time

If the lru list has never been sorted, the following line will not be
printed:
    586ms last sorted interval
If there is an empty lru list, the following lines also will not be
printed:
    250 inodes on lru list
  ...
  maximum:
    255 inode (255 objects, 198 reclaimable)
    0 us max scan time

Meanwhile in this commit a new trace point is defined to print some
details in __ext4_es_shrink().

Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-09-01 22:26:49 -04:00
Zheng Liu e963bb1de4 ext4: improve extents status tree trace point
This commit improves the trace point of extents status tree.  We rename
trace_ext4_es_shrink_enter in ext4_es_count() because it is also used
in ext4_es_scan() and we can not identify them from the result.

Further this commit fixes a variable name in trace point in order to
keep consistency with others.

Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-09-01 22:22:13 -04:00
Zhang Rui 62ebb7b166 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal into eduardo-soc 2014-08-27 15:40:27 +08:00
Linus Torvalds 1d508f8ace Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Pull more powerpc updates from Ben Herrenschmidt:
 "Here are some more powerpc bits for 3.17, essentially fixes.

  The biggest series, also aimed at -stable, is from Aneesh and is the
  result of weeks and weeks of debugging to find out why the heck or THP
  implementation was occasionally triggering multi-hit errors in our
  level 1 TLB.  It ended up being a combination of issues including
  subtleties as to how we should invalidate those special 'MPSS' pages
  we use to allow the use of 16M pages inside 4K/64K "base page size"
  segments (you really have to love our MMU !)

  Another interesting one in the "OMG" category is the series from
  Michael adding memory barriers to spin_is_locked().  That's also the
  result of many days of debugging to figure out why the semaphore code
  would occasionally crash in ways that made no sense.  It ended up
  being some creative lock stacking that was defeated by the fact that
  our locks allow a load inside the locked section to be re-ordered with
  the load of the lock value itself (I'm still of two mind about whether
  to kill that once and for all by putting a heavier barrier back into
  our lock implementation...).  The fixes come with a long explanation
  in the cset comments, feel free to read it if you feel like having a
  headache today"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (25 commits)
  powerpc/thp: Add tracepoints to track hugepage invalidate
  powerpc/mm: Use read barrier when creating real_pte
  powerpc/thp: Use ACCESS_ONCE when loading pmdp
  powerpc/thp: Invalidate with vpn in loop
  powerpc/thp: Handle combo pages in invalidate
  powerpc/thp: Invalidate old 64K based hash page mapping before insert of 4k pte
  powerpc/thp: Don't recompute vsid and ssize in loop on invalidate
  powerpc/thp: Add write barrier after updating the valid bit
  powerpc: reorder per-cpu NUMA information's initialization
  powerpc/perf/hv-24x7: Use kmem_cache_free
  powerpc/pseries/hvcserver: Fix endian issue in hvcs_get_partner_info
  powerpc: Hard disable interrupts in xmon
  powerpc: remove duplicate definition of TEXASR_FS
  powerpc/pseries: Avoid deadlock on removing ddw
  powerpc/pseries: Failure on removing device node
  powerpc/boot: Use correct zlib types for comparison
  powerpc/powernv: Interface to register/unregister opal dump region
  printk: Add function to return log buffer address and size
  powerpc: Add POWER8 features to CPU_FTRS_POSSIBLE/ALWAYS
  powerpc/ppc476: Disable BTAC
  ...
2014-08-14 10:14:07 -06:00
Linus Torvalds d429a3639c Merge branch 'for-3.17/drivers' of git://git.kernel.dk/linux-block
Pull block driver changes from Jens Axboe:
 "Nothing out of the ordinary here, this pull request contains:

   - A big round of fixes for bcache from Kent Overstreet, Slava Pestov,
     and Surbhi Palande.  No new features, just a lot of fixes.

   - The usual round of drbd updates from Andreas Gruenbacher, Lars
     Ellenberg, and Philipp Reisner.

   - virtio_blk was converted to blk-mq back in 3.13, but now Ming Lei
     has taken it one step further and added support for actually using
     more than one queue.

   - Addition of an explicit SG_FLAG_Q_AT_HEAD for block/bsg, to
     compliment the the default behavior of adding to the tail of the
     queue.  From Douglas Gilbert"

* 'for-3.17/drivers' of git://git.kernel.dk/linux-block: (86 commits)
  bcache: Drop unneeded blk_sync_queue() calls
  bcache: add mutex lock for bch_is_open
  bcache: Correct printing of btree_gc_max_duration_ms
  bcache: try to set b->parent properly
  bcache: fix memory corruption in init error path
  bcache: fix crash with incomplete cache set
  bcache: Fix more early shutdown bugs
  bcache: fix use-after-free in btree_gc_coalesce()
  bcache: Fix an infinite loop in journal replay
  bcache: fix crash in bcache_btree_node_alloc_fail tracepoint
  bcache: bcache_write tracepoint was crashing
  bcache: fix typo in bch_bkey_equal_header
  bcache: Allocate bounce buffers with GFP_NOWAIT
  bcache: Make sure to pass GFP_WAIT to mempool_alloc()
  bcache: fix uninterruptible sleep in writeback thread
  bcache: wait for buckets when allocating new btree root
  bcache: fix crash on shutdown in passthrough mode
  bcache: fix lockdep warnings on shutdown
  bcache allocator: send discards with correct size
  bcache: Fix to remove the rcu_sched stalls.
  ...
2014-08-14 09:10:21 -06:00
Aneesh Kumar K.V 9e813308a5 powerpc/thp: Add tracepoints to track hugepage invalidate
Add tracepoint to track hugepage invalidate. This help us
in debugging difficult to track bugs.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-13 18:20:42 +10:00
Linus Torvalds c23190c0bf Nicolas Pitre added generic tracepoints for tracing IPIs and updated the
arm and arm64 architectures. It required some minor updates to the generic
 tracepoint system, so it had to wait for me to implement them.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJT5N6DAAoJEKQekfcNnQGuv60H/2NXDO/kUtvdF0L7ewaGbDaO
 sjGOXMHDDgF4fQixPsIYNHdra0iGSPL59NBjIaLsESFsB8SUOVqXSclV0MSiZJQc
 1PgTduE19p2kEMsqw6F4l8Ir8hPrUT8V8pQScR9lUkww3ANpyTB6Bbg1rZHcmTYA
 yAq20q85rfQrAGwbvvhg40UYF8/su0FMUAbt/a180kVL8yeQI2liAkNOJTMCVq35
 PpL7if4dlqAhKMqne71ae080PIPOH34q2lmZX3/SbpRvT2tSkS4dkoSFtCAD4pvx
 c2TKNOxEDDWlinN/305PXH2yQ87MTIm44SBaTu/WPllUSQoO//EKI7+13tNS8Qc=
 =/VeP
 -----END PGP SIGNATURE-----

Merge tag 'trace-ipi-tracepoints' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull IPI tracepoints for ARM from Steven Rostedt:
 "Nicolas Pitre added generic tracepoints for tracing IPIs and updated
  the arm and arm64 architectures.  It required some minor updates to
  the generic tracepoint system, so it had to wait for me to implement
  them"

* tag 'trace-ipi-tracepoints' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ARM64: add IPI tracepoints
  ARM: add IPI tracepoints
  tracepoint: add generic tracepoint definitions for IPI tracing
  tracing: Do not do anything special with tracepoint_string when tracing is disabled
2014-08-09 17:33:44 -07:00
Nicolas Pitre f6d9804d14 tracepoint: add generic tracepoint definitions for IPI tracing
The Inter Processor Interrupt is used to make another processor do a
specific action such as rescheduling tasks, signal a timer event or
execute something in another CPU's context. IRQs are already traceable
but IPIs were not. Tracing them is useful for monitoring IPI latency,
or to verify when they are the source of CPU wake-ups with power
management implications.

Three trace hooks are defined: ipi_raise, ipi_entry and ipi_exit. To make
them portable, a string is used to identify them and correlate related
events. Additionally, ipi_raise records a bitmask representing targeted
CPUs.

Link: http://lkml.kernel.org/p/1406318733-26754-3-git-send-email-nicolas.pitre@linaro.org

Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-08-07 20:40:40 -04:00
Linus Torvalds 66bb0aa077 Here are the PPC and ARM changes for KVM, which I separated because
they had small conflicts (respectively within KVM documentation,
 and with 3.16-rc changes).  Since they were all within the subsystem,
 I took care of them.
 
 Stephen Rothwell reported some snags in PPC builds, but they are all
 fixed now; the latest linux-next report was clean.
 
 New features for ARM include:
 - KVM VGIC v2 emulation on GICv3 hardware
 - Big-Endian support for arm/arm64 (guest and host)
 - Debug Architecture support for arm64 (arm32 is on Christoffer's todo list)
 
 And for PPC:
 - Book3S: Good number of LE host fixes, enable HV on LE
 - Book3S HV: Add in-guest debug support
 
 This release drops support for KVM on the PPC440.  As a result, the
 PPC merge removes more lines than it adds. :)
 
 I also included an x86 change, since Davidlohr tied it to an independent
 bug report and the reporter quickly provided a Tested-by; there was no
 reason to wait for -rc2.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJT4iIJAAoJEBvWZb6bTYbyZqoP/3Wxy8NWPFJ8HGt81NHlGnDS
 a9UbL7EibcOEG+aaKqmtBglTD5YDiGBDNCxxiSJaDHt+grLN4fsWIliJob1nJFoO
 90f89EWN2XjeCrJXA5nUoeg5tpc5OoYKsiP6pTgzIwkP8vvs/H1+zpcTS/UmYsr/
 qipVMMsM+zZeHWZcSbqjW88z7YqIn1sr5282wJ85cbyv4KGizb/G4dyPuDqLb6np
 hkAD8Ah6VV2suQ2FSy7G2fg20R0vglUi60hkEHLoCBPVqJCl7SmC8MvxNbjBnP8S
 J36R0R0u1wHYKzAGooLJGVOZ/o/gSiVqKX+++L2EvJBN+kuA6u/7fxLyBT+LwDAE
 IF/Aln5rpg1fe+eywvhz86WljTVEQ8bO1zVsIQUPY+/ZOPedZHMwyvXft8ogbjSp
 2m9OJ/3e8Aggh0OeHpCDoeow+QDUXvX0YdCw+2Yh0p+7VMXqkyp0QEiBu38jrusC
 rB3VNifJbDSWLKdG9LfCAPHnxZD2XYEwv2WFBo6KQOGMGHfx0GXpCOL/jQihrhA6
 HtEG5Bs3lvnHQemdpUZ58xojiABbMaUPdcnPXQQEp23WhZzrfLMLzqVG0VYnhSsC
 9pi7MJj8c31rqx5WU2oRM28i/BvNxN0NCtkDpineO5s3f89Ws1xnwxqlm38AKP0J
 irJQTYFEqec+GM9JK1rG
 =hyQP
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull second round of KVM changes from Paolo Bonzini:
 "Here are the PPC and ARM changes for KVM, which I separated because
  they had small conflicts (respectively within KVM documentation, and
  with 3.16-rc changes).  Since they were all within the subsystem, I
  took care of them.

  Stephen Rothwell reported some snags in PPC builds, but they are all
  fixed now; the latest linux-next report was clean.

  New features for ARM include:
   - KVM VGIC v2 emulation on GICv3 hardware
   - Big-Endian support for arm/arm64 (guest and host)
   - Debug Architecture support for arm64 (arm32 is on Christoffer's todo list)

  And for PPC:
   - Book3S: Good number of LE host fixes, enable HV on LE
   - Book3S HV: Add in-guest debug support

  This release drops support for KVM on the PPC440.  As a result, the
  PPC merge removes more lines than it adds.  :)

  I also included an x86 change, since Davidlohr tied it to an
  independent bug report and the reporter quickly provided a Tested-by;
  there was no reason to wait for -rc2"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (122 commits)
  KVM: Move more code under CONFIG_HAVE_KVM_IRQFD
  KVM: nVMX: fix "acknowledge interrupt on exit" when APICv is in use
  KVM: nVMX: Fix nested vmexit ack intr before load vmcs01
  KVM: PPC: Enable IRQFD support for the XICS interrupt controller
  KVM: Give IRQFD its own separate enabling Kconfig option
  KVM: Move irq notifier implementation into eventfd.c
  KVM: Move all accesses to kvm::irq_routing into irqchip.c
  KVM: irqchip: Provide and use accessors for irq routing table
  KVM: Don't keep reference to irq routing table in irqfd struct
  KVM: PPC: drop duplicate tracepoint
  arm64: KVM: fix 64bit CP15 VM access for 32bit guests
  KVM: arm64: GICv3: mandate page-aligned GICV region
  arm64: KVM: GICv3: move system register access to msr_s/mrs_s
  KVM: PPC: PR: Handle FSCR feature deselects
  KVM: PPC: HV: Remove generic instruction emulation
  KVM: PPC: BOOKEHV: rename e500hv_spr to bookehv_spr
  KVM: PPC: Remove DCR handling
  KVM: PPC: Expose helper functions for data/inst faults
  KVM: PPC: Separate loadstore emulation from priv emulation
  KVM: PPC: Handle magic page in kvmppc_ld/st
  ...
2014-08-07 11:35:30 -07:00
Linus Torvalds 33caee3992 Merge branch 'akpm' (patchbomb from Andrew Morton)
Merge incoming from Andrew Morton:
 - Various misc things.
 - arch/sh updates.
 - Part of ocfs2.  Review is slow.
 - Slab updates.
 - Most of -mm.
 - printk updates.
 - lib/ updates.
 - checkpatch updates.

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (226 commits)
  checkpatch: update $declaration_macros, add uninitialized_var
  checkpatch: warn on missing spaces in broken up quoted
  checkpatch: fix false positives for --strict "space after cast" test
  checkpatch: fix false positive MISSING_BREAK warnings with --file
  checkpatch: add test for native c90 types in unusual order
  checkpatch: add signed generic types
  checkpatch: add short int to c variable types
  checkpatch: add for_each tests to indentation and brace tests
  checkpatch: fix brace style misuses of else and while
  checkpatch: add --fix option for a couple OPEN_BRACE misuses
  checkpatch: use the correct indentation for which()
  checkpatch: add fix_insert_line and fix_delete_line helpers
  checkpatch: add ability to insert and delete lines to patch/file
  checkpatch: add an index variable for fixed lines
  checkpatch: warn on break after goto or return with same tab indentation
  checkpatch: emit a warning on file add/move/delete
  checkpatch: add test for commit id formatting style in commit log
  checkpatch: emit fewer kmalloc_array/kcalloc conversion warnings
  checkpatch: improve "no space after cast" test
  checkpatch: allow multiple const * types
  ...
2014-08-06 21:14:42 -07:00
Linus Torvalds 930e0312bc sound updates for 3.17-rc1
There've been many updates in ASoC side at this time, especially the
 framework enhancement for multiple CODECs on a single DAI and more
 componentization works.  The only major change in ALSA core is the
 addition of timestamp type in sw_params field.  This should behave in
 backward compatible way.  Other than that, there are lots of small
 changes and new drivers in wide range, including a large code cut in
 HD-audio driver for deprecated static quirks.  Some highlights are
 below:
 
 ALSA Core:
 - Add the new timestamp type field to sw_params to choose
   MONOTONIC_RAW type
 
 HD-audio:
 - Continued conversion to standard printk macros, generic code
   cleanups
 - Removal of obsoleted static quirk codes for Conexant and C-Media
   codecs
 - Fixups for HP Envy TS, Dell XPS 15, HP and Dell mute/mic LED,
   Gigabyte BXBT-2807 mobo
 - Intel Braswell support
 
 ASoC:
 - Support for multiple CODECs attached to a single DAI, enabling
   systems with for example multiple DAC/speaker drivers on a single
  link, contributed by Benoit Cousson based on work from Misael Lopez
  Cruz
 - Support for byte controls larger than 256 bytes based on the use of
   TLVs contributed by Omair Mohammed Abdullah
 - More componentisation work from Lars-Peter Clausen
 - The remainder of the conversions of CODEC drivers to params_width()
   by Mark Brown
 - Drivers for Cirrus Logic CS4265, Freescale i.MX ASRC blocks, Realtek
   RT286 and RT5670, Rockchip RK3xxx I2S controllers and Texas
   Instruments TAS2552
 - Lots of updates and fixes, especially to the DaVinci, Intel,
   Freescale, Realtek, and rcar drivers
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJT4fj0AAoJEGwxgFQ9KSmkXQ0QAIiRmVg40aiJoEdOLGgzNZtq
 r/nXj69AuB6JSy0hKbFyyijjCcRpyCCGvjDYlogjT75M3c35Npz/m85oZHx2tajD
 SB5OA+QxO4EQ3C0GjITIRHJROm4MM8/rnbnNYTsWnEGRkobTFTl0rHbSkA85RGFt
 0zZqqs1R0s/nO9PMQ+5PA5x9xVFiZs2COeCK0CFA9s2ACf/hbxJBRIqYpIFWOo78
 9L41jBOFuC/hIb4qwjgmsCWbKe1KQysTAf+Wty0CKipJ6VhfCbPn1Qn1zXGeUOxc
 mj4eZ6LpJTrVMr/UN02c5vgPOiaBrQ7fWZo3dVHLlIjC6cEI1tUvNYAin7CMEzx8
 DUsvo9p30OheA+ijc9wKaYFY6YmmJZRtpnnMd39i0oPG+bhvoV7vjXjJSB1sLJt1
 o82xLpVL4Th8H+DMDVwA7UIBvvZGZBusw1qsNGfcOPrmExi4ScGhA0gSOO6W2y1z
 VQLRbiXB/HtJGxeqWL6RqJOcLBOlJNmsk4UZMOSCu2OZrWd5I8MuRrNWeHDqhX1H
 +VDEJVhFmM21vMpnobzEPxWsMgTVIAVf3Thh+WgaPxL4Krh0vkpZsgZk16VVmy/o
 OJJF3n41FND4n9zSjOe4MkuL8UCOUpKCaBdqj9K1s6UKwOEKuDNslyT/zqutRWK5
 x1uApU5y+E4iQT/b7cmA
 =RL72
 -----END PGP SIGNATURE-----

Merge tag 'sound-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "There've been many updates in ASoC side at this time, especially the
  framework enhancement for multiple CODECs on a single DAI and more
  componentization works.

  The only major change in ALSA core is the addition of timestamp type
  in sw_params field.  This should behave in backward compatible way.

  Other than that, there are lots of small changes and new drivers in
  wide range, including a large code cut in HD-audio driver for
  deprecated static quirks.  Some highlights are below:

  ALSA Core:
   - Add the new timestamp type field to sw_params to choose
     MONOTONIC_RAW type

  HD-audio:
   - Continued conversion to standard printk macros, generic code
     cleanups
   - Removal of obsoleted static quirk codes for Conexant and C-Media
     codecs
   - Fixups for HP Envy TS, Dell XPS 15, HP and Dell mute/mic LED,
     Gigabyte BXBT-2807 mobo
   - Intel Braswell support

  ASoC:
   - Support for multiple CODECs attached to a single DAI, enabling
     systems with for example multiple DAC/speaker drivers on a single
     link, contributed by Benoit Cousson based on work from Misael Lopez
     Cruz
   - Support for byte controls larger than 256 bytes based on the use of
     TLVs contributed by Omair Mohammed Abdullah
   - More componentisation work from Lars-Peter Clausen
   - The remainder of the conversions of CODEC drivers to params_width()
     by Mark Brown
   - Drivers for Cirrus Logic CS4265, Freescale i.MX ASRC blocks,
     Realtek RT286 and RT5670, Rockchip RK3xxx I2S controllers and Texas
     Instruments TAS2552
   - Lots of updates and fixes, especially to the DaVinci, Intel,
     Freescale, Realtek, and rcar drivers"

* tag 'sound-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (402 commits)
  ALSA: usb-audio: Whitespace cleanups for sound/usb/midi.*
  ALSA: usb-audio: Respond to suspend and resume callbacks for MIDI input
  sound/oss/pss: Remove typedefs pss_mixerdata and pss_confdata
  sound/oss/opl3: Remove typedef opl_devinfo
  ALSA: fireworks: fix specifiers in format strings for propper output
  ASoC: imx-audmux: Use uintptr_t for port numbers
  ASoC: davinci: Enable menuconfig entry for McASP
  ASoC: fsl_asrc: Don't access members of config before checking it
  ASoC: fsl_sarc_dma: Check pair before using it
  ASoC: adau1977: Fix truncation warning on 64 bit architectures
  ALSA: virtuoso: add Xonar Essence STX II support
  ALSA: riptide: fix %d confusingly prefixed with 0x in format strings
  ALSA: fireworks: fix %d confusingly prefixed with 0x in format strings
  ALSA: hda - add codec ID for Braswell display audio codec
  ALSA: hda - add PCI IDs for Intel Braswell
  ALSA: usb-audio: Adjust Gamecom 780 volume level
  ALSA: usb-audio: improve dmesg source grepability
  ASoC: rt5670: Fix duplicate const warnings
  ASoC: rt5670: Staticise non-exported symbols
  ASoC: Intel: update stream only on stream IPC msgs
  ...
2014-08-06 20:07:24 -07:00
Mel Gorman 24b7e5819a mm: pagemap: avoid unnecessary overhead when tracepoints are deactivated
This was formerly the series "Improve sequential read throughput" which
noted some major differences in performance of tiobench since 3.0.
While there are a number of factors, two that dominated were the
introduction of the fair zone allocation policy and changes to CFQ.

The behaviour of fair zone allocation policy makes more sense than
tiobench as a benchmark and CFQ defaults were not changed due to
insufficient benchmarking.

This series is what's left.  It's one functional fix to the fair zone
allocation policy when used on NUMA machines and a reduction of overhead
in general.  tiobench was used for the comparison despite its flaws as
an IO benchmark as in this case we are primarily interested in the
overhead of page allocator and page reclaim activity.

On UMA, it makes little difference to overhead

          3.16.0-rc3   3.16.0-rc3
             vanilla lowercost-v5
User          383.61      386.77
System        403.83      401.74
Elapsed      5411.50     5413.11

On a 4-socket NUMA machine it's a bit more noticable

          3.16.0-rc3   3.16.0-rc3
             vanilla lowercost-v5
User          746.94      802.00
System      65336.22    40852.33
Elapsed     27553.52    27368.46

This patch (of 6):

The LRU insertion and activate tracepoints take PFN as a parameter
forcing the overhead to the caller.  Move the overhead to the tracepoint
fast-assign method to ensure the cost is only incurred when the
tracepoint is active.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 18:01:20 -07:00
Max Asbock 4a262d2658 mm tracing: tell mm_migrate_pages event about numa_misplaced
The mm_migrate_pages trace event reports a reason for the migration,
typically as a symbolic string.  The exception is the reason
MR_NUMA_MISPLACED for which it just displays the numeric value:
mm_migrate_pages: nr_succeeded=1 nr_failed=0 mode=MIGRATE_ASYNC
reason=0x5

This patch makes the output consistent by introducing a string value for
MR_NUMA_MISPLACED.  The event is then reported as: mm_migrate_pages:
nr_succeeded=1 nr_failed=0 mode=MIGRATE_ASYNC reason=numa_misplaced

Signed-off-by: Max Asbock <masbock@linux.vnet.ibm.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 18:01:18 -07:00
Paolo Bonzini c77dcacb39 KVM: Move more code under CONFIG_HAVE_KVM_IRQFD
Commits e4d57e1ee1 (KVM: Move irq notifier implementation into
eventfd.c, 2014-06-30) included the irq notifier code unconditionally
in eventfd.c, while it was under CONFIG_HAVE_KVM_IRQCHIP before.

Similarly, commit 297e21053a (KVM: Give IRQFD its own separate enabling
Kconfig option, 2014-06-30) moved code from CONFIG_HAVE_IRQ_ROUTING
to CONFIG_HAVE_KVM_IRQFD but forgot to move the pieces that used to be
under CONFIG_HAVE_KVM_IRQCHIP.

Together, this broke compilation without CONFIG_KVM_XICS.  Fix by adding
or changing the #ifdefs so that they point at CONFIG_HAVE_KVM_IRQFD.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-06 14:24:47 +02:00
Linus Torvalds b54ecfb702 Merge tag 'for-f2fs-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
 "This series includes patches to:
   - add nobarrier mount option
   - support tmpfile and rename2
   - enhance the fdatasync behavior
   - fix the error path
   - fix the recovery routine
   - refactor a part of the checkpoint procedure
   - reduce some lock contentions"

* tag 'for-f2fs-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (40 commits)
  f2fs: use for_each_set_bit to simplify the code
  f2fs: add f2fs_balance_fs for expand_inode_data
  f2fs: invalidate xattr node page when evict inode
  f2fs: avoid skipping recover_inline_xattr after recover_inline_data
  f2fs: add tracepoint for f2fs_direct_IO
  f2fs: reduce competition among node page writes
  f2fs: fix coding style
  f2fs: remove redundant lines in allocate_data_block
  f2fs: add tracepoint for f2fs_issue_flush
  f2fs: avoid retrying wrong recovery routine when error was occurred
  f2fs: test before set/clear bits
  f2fs: fix wrong condition for unlikely
  f2fs: enable in-place-update for fdatasync
  f2fs: skip unnecessary data writes during fsync
  f2fs: add info of appended or updated data writes
  f2fs: use radix_tree for ino management
  f2fs: add infra for ino management
  f2fs: punch the core function for inode management
  f2fs: add nobarrier mount option
  f2fs: fix to put root inode in error path of fill_super
  ...
2014-08-04 20:30:07 -07:00
Linus Torvalds 29b88e23a9 Driver core patches for 3.17-rc1
Here's the big driver-core pull request for 3.17-rc1.
 
 Largest thing in here is the dma-buf rework and fence code, that touched
 many different subsystems so it was agreed it should go through this
 tree to handle merge issues.  There's also some firmware loading
 updates, as well as tests added, and a few other tiny changes, the
 changelog has the details.
 
 All have been in linux-next for a long time.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlPf1XcACgkQMUfUDdst+ylREACdHLXBa02yLrRzbrONJ+nARuFv
 JuQAoMN49PD8K9iMQpXqKBvZBsu+iCIY
 =w8OJ
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here's the big driver-core pull request for 3.17-rc1.

  Largest thing in here is the dma-buf rework and fence code, that
  touched many different subsystems so it was agreed it should go
  through this tree to handle merge issues.  There's also some firmware
  loading updates, as well as tests added, and a few other tiny changes,
  the changelog has the details.

  All have been in linux-next for a long time"

* tag 'driver-core-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits)
  ARM: imx: Remove references to platform_bus in mxc code
  firmware loader: Fix _request_firmware_load() return val for fw load abort
  platform: Remove most references to platform_bus device
  test: add firmware_class loader test
  doc: fix minor typos in firmware_class README
  staging: android: Cleanup style issues
  Documentation: devres: Sort managed interfaces
  Documentation: devres: Add devm_kmalloc() et al
  fs: debugfs: remove trailing whitespace
  kernfs: kernel-doc warning fix
  debugfs: Fix corrupted loop in debugfs_remove_recursive
  stable_kernel_rules: Add pointer to netdev-FAQ for network patches
  driver core: platform: add device binding path 'driver_override'
  driver core/platform: remove unused implicit padding in platform_object
  firmware loader: inform direct failure when udev loader is disabled
  firmware: replace ALIGN(PAGE_SIZE) by PAGE_ALIGN
  firmware: read firmware size using i_size_read()
  firmware loader: allow disabling of udev as firmware loader
  reservation: add suppport for read-only access using rcu
  reservation: update api and add some helpers
  ...

Conflicts:
	drivers/base/platform.c
2014-08-04 18:34:04 -07:00
Linus Torvalds d782cebd6b Merge branch 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Ingo Molnar:
 "The main changes in this cycle are:

   - RAS tracing/events infrastructure, by Gong Chen.

   - Various generalizations of the APEI code to make it available to
     non-x86 architectures, by Tomasz Nowicki"

* 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/ras: Fix build warnings in <linux/aer.h>
  acpi, apei, ghes: Factor out ioremap virtual memory for IRQ and NMI context.
  acpi, apei, ghes: Make NMI error notification to be GHES architecture extension.
  apei, mce: Factor out APEI architecture specific MCE calls.
  RAS, extlog: Adjust init flow
  trace, eMCA: Add a knob to adjust where to save event log
  trace, RAS: Add eMCA trace event interface
  RAS, debugfs: Add debugfs interface for RAS subsystem
  CPER: Adjust code flow of some functions
  x86, MCE: Robustify mcheck_init_device
  trace, AER: Move trace into unified interface
  trace, RAS: Add basic RAS trace event
  x86, MCE: Kill CPU_POST_DEAD
2014-08-04 17:21:59 -07:00
Linus Torvalds ce47479632 Merge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm changes from Ingo Molnar:
 "The main change in this cycle is the rework of the TLB range flushing
  code, to simplify, fix and consolidate the code.  By Dave Hansen"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Set TLB flush tunable to sane value (33)
  x86/mm: New tunable for single vs full TLB flush
  x86/mm: Add tracepoints for TLB flushes
  x86/mm: Unify remote INVLPG code
  x86/mm: Fix missed global TLB flush stat
  x86/mm: Rip out complicated, out-of-date, buggy TLB flushing
  x86/mm: Clean up the TLB flushing code
  x86/smep: Be more informative when signalling an SMEP fault
2014-08-04 17:15:45 -07:00
Slava Pestov 913dc33fb2 bcache: fix crash in bcache_btree_node_alloc_fail tracepoint
'b' was NULL.

Change-Id: Icac0fd04afa2d23f213d96d51afd53374e6dd0c0
2014-08-04 15:23:03 -07:00
Slava Pestov 60ae81eee8 bcache: bcache_write tracepoint was crashing
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-08-04 15:23:03 -07:00
Mark Brown a1cb98ac8b Merge remote-tracking branch 'asoc/topic/component' into asoc-next 2014-08-04 16:31:15 +01:00
Chao Yu 70407fad85 f2fs: add tracepoint for f2fs_direct_IO
This patch adds a tracepoint for f2fs_direct_IO.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-08-02 07:34:46 -07:00
Dave Hansen d17d8f9ded x86/mm: Add tracepoints for TLB flushes
We don't have any good way to figure out what kinds of flushes
are being attempted.  Right now, we can try to use the vm
counters, but those only tell us what we actually did with the
hardware (one-by-one vs full) and don't tell us what was actually
_requested_.

This allows us to select out "interesting" TLB flushes that we
might want to optimize (like the ranged ones) and ignore the ones
that we have very little control over (the ones at context
switch).

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: http://lkml.kernel.org/r/20140731154059.4C96CBA5@viggo.jf.intel.com
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-07-31 08:48:51 -07:00
Jaegeuk Kim 24a9ee0fa3 f2fs: add tracepoint for f2fs_issue_flush
This patch adds a tracepoint for f2fs_issue_flush.

Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-07-30 14:13:36 -07:00
Punit Agrawal 208cd822a1 thermal: trace: Trace when temperature is above a trip point
Create a new event to trace when the temperature is above a trip
point. Use the trace-point when handling non-critical and critical
trip pionts.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-07-29 09:28:43 -04:00
Punit Agrawal 39811569e4 thermal: trace: Trace when a cooling device's state is updated
Introduce and use an event to trace when a cooling device's state is
updated. This is useful to follow the effect of governor decisions on
cooling devices.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-07-29 09:27:54 -04:00
Punit Agrawal 100a8fdbf5 thermal: trace: Trace temperature changes
Create a new event to trace the temperature of a thermal zone. Using
this event trace the temperature changes of the thermal zone every-time
it is updated.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2014-07-29 09:27:54 -04:00
Maarten Lankhorst e941759c74 fence: dma-buf cross-device synchronization (v18)
A fence can be attached to a buffer which is being filled or consumed
by hw, to allow userspace to pass the buffer without waiting to another
device.  For example, userspace can call page_flip ioctl to display the
next frame of graphics after kicking the GPU but while the GPU is still
rendering.  The display device sharing the buffer with the GPU would
attach a callback to get notified when the GPU's rendering-complete IRQ
fires, to update the scan-out address of the display, without having to
wake up userspace.

A driver must allocate a fence context for each execution ring that can
run in parallel. The function for this takes an argument with how many
contexts to allocate:
  + fence_context_alloc()

A fence is transient, one-shot deal.  It is allocated and attached
to one or more dma-buf's.  When the one that attached it is done, with
the pending operation, it can signal the fence:
  + fence_signal()

To have a rough approximation whether a fence is fired, call:
  + fence_is_signaled()

The dma-buf-mgr handles tracking, and waiting on, the fences associated
with a dma-buf.

The one pending on the fence can add an async callback:
  + fence_add_callback()

The callback can optionally be cancelled with:
  + fence_remove_callback()

To wait synchronously, optionally with a timeout:
  + fence_wait()
  + fence_wait_timeout()

When emitting a fence, call:
  + trace_fence_emit()

To annotate that a fence is blocking on another fence, call:
  + trace_fence_annotate_wait_on(fence, on_fence)

A default software-only implementation is provided, which can be used
by drivers attaching a fence to a buffer when they have no other means
for hw sync.  But a memory backed fence is also envisioned, because it
is common that GPU's can write to, or poll on some memory location for
synchronization.  For example:

  fence = custom_get_fence(...);
  if ((seqno_fence = to_seqno_fence(fence)) != NULL) {
    dma_buf *fence_buf = seqno_fence->sync_buf;
    get_dma_buf(fence_buf);

    ... tell the hw the memory location to wait ...
    custom_wait_on(fence_buf, seqno_fence->seqno_ofs, fence->seqno);
  } else {
    /* fall-back to sw sync * /
    fence_add_callback(fence, my_cb);
  }

On SoC platforms, if some other hw mechanism is provided for synchronizing
between IP blocks, it could be supported as an alternate implementation
with it's own fence ops in a similar way.

enable_signaling callback is used to provide sw signaling in case a cpu
waiter is requested or no compatible hardware signaling could be used.

The intention is to provide a userspace interface (presumably via eventfd)
later, to be used in conjunction with dma-buf's mmap support for sw access
to buffers (or for userspace apps that would prefer to do their own
synchronization).

v1: Original
v2: After discussion w/ danvet and mlankhorst on #dri-devel, we decided
    that dma-fence didn't need to care about the sw->hw signaling path
    (it can be handled same as sw->sw case), and therefore the fence->ops
    can be simplified and more handled in the core.  So remove the signal,
    add_callback, cancel_callback, and wait ops, and replace with a simple
    enable_signaling() op which can be used to inform a fence supporting
    hw->hw signaling that one or more devices which do not support hw
    signaling are waiting (and therefore it should enable an irq or do
    whatever is necessary in order that the CPU is notified when the
    fence is passed).
v3: Fix locking fail in attach_fence() and get_fence()
v4: Remove tie-in w/ dma-buf..  after discussion w/ danvet and mlankorst
    we decided that we need to be able to attach one fence to N dma-buf's,
    so using the list_head in dma-fence struct would be problematic.
v5: [ Maarten Lankhorst ] Updated for dma-bikeshed-fence and dma-buf-manager.
v6: [ Maarten Lankhorst ] I removed dma_fence_cancel_callback and some comments
    about checking if fence fired or not. This is broken by design.
    waitqueue_active during destruction is now fatal, since the signaller
    should be holding a reference in enable_signalling until it signalled
    the fence. Pass the original dma_fence_cb along, and call __remove_wait
    in the dma_fence_callback handler, so that no cleanup needs to be
    performed.
v7: [ Maarten Lankhorst ] Set cb->func and only enable sw signaling if
    fence wasn't signaled yet, for example for hardware fences that may
    choose to signal blindly.
v8: [ Maarten Lankhorst ] Tons of tiny fixes, moved __dma_fence_init to
    header and fixed include mess. dma-fence.h now includes dma-buf.h
    All members are now initialized, so kmalloc can be used for
    allocating a dma-fence. More documentation added.
v9: Change compiler bitfields to flags, change return type of
    enable_signaling to bool. Rework dma_fence_wait. Added
    dma_fence_is_signaled and dma_fence_wait_timeout.
    s/dma// and change exports to non GPL. Added fence_is_signaled and
    fence_enable_sw_signaling calls, add ability to override default
    wait operation.
v10: remove event_queue, use a custom list, export try_to_wake_up from
    scheduler. Remove fence lock and use a global spinlock instead,
    this should hopefully remove all the locking headaches I was having
    on trying to implement this. enable_signaling is called with this
    lock held.
v11:
    Use atomic ops for flags, lifting the need for some spin_lock_irqsaves.
    However I kept the guarantee that after fence_signal returns, it is
    guaranteed that enable_signaling has either been called to completion,
    or will not be called any more.

    Add contexts and seqno to base fence implementation. This allows you
    to wait for less fences, by testing for seqno + signaled, and then only
    wait on the later fence.

    Add FENCE_TRACE, FENCE_WARN, and FENCE_ERR. This makes debugging easier.
    An CONFIG_DEBUG_FENCE will be added to turn off the FENCE_TRACE
    spam, and another runtime option can turn it off at runtime.
v12:
    Add CONFIG_FENCE_TRACE. Add missing documentation for the fence->context
    and fence->seqno members.
v13:
    Fixup CONFIG_FENCE_TRACE kconfig description.
    Move fence_context_alloc to fence.
    Simplify fence_later.
    Kill priv member to fence_cb.
v14:
    Remove priv argument from fence_add_callback, oops!
v15:
    Remove priv from documentation.
    Explicitly include linux/atomic.h.
v16:
    Add trace events.
    Import changes required by android syncpoints.
v17:
    Use wake_up_state instead of try_to_wake_up. (Colin Cross)
    Fix up commit description for seqno_fence. (Rob Clark)
v18:
    Rename release_fence to fence_release.
    Move to drivers/dma-buf/.
    Rename __fence_is_signaled and __fence_signal to *_locked.
    Rename __fence_init to fence_init.
    Make fence_default_wait return a signed long, and fix wait ops too.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com> #use smp_mb__before_atomic()
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-08 12:18:56 -07:00
Chen, Gong 0a2409aad3 trace, AER: Move trace into unified interface
AER uses a separate trace interface by now. To make it
consistent, move it into unified RAS trace interface.

Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2014-06-23 10:12:29 -07:00
Lars-Peter Clausen f4333203ec ASoC: Move name and id from CODEC/platform to component
The component struct already has a name and id field which are initialized to
the same values as the same fields in the CODEC and platform structs. So remove
them from the CODEC and platform structs and used the ones from the component
struct instead.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-21 21:04:24 +01:00
Steven Rostedt 4d4c9cc839 tracing: Add __field_struct macro for TRACE_EVENT()
Currently the __field() macro in TRACE_EVENT is only good for primitive
values, such as integers and pointers, but it fails on complex data types
such as structures or unions. This is because the __field() macro
determines if the variable is signed or not with the test of:

  (((type)(-1)) < (type)1)

Unfortunately, that fails when type is a structure.

Since trace events should support structures as fields a new macro
is created for such a case called __field_struct() which acts exactly
the same as __field() does but it does not do the signed type check
and just uses a constant false for that answer.

Cc: Tony Luck <tony.luck@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-06-21 00:18:42 -04:00
Oleg Nesterov 4af4206be2 tracing: Fix syscall_*regfunc() vs copy_process() race
syscall_regfunc() and syscall_unregfunc() should set/clear
TIF_SYSCALL_TRACEPOINT system-wide, but do_each_thread() can race
with copy_process() and miss the new child which was not added to
the process/thread lists yet.

Change copy_process() to update the child's TIF_SYSCALL_TRACEPOINT
under tasklist.

Link: http://lkml.kernel.org/p/20140413185854.GB20668@redhat.com

Cc: stable@vger.kernel.org # 2.6.33
Fixes: a871bd33a6 "tracing: Add syscall tracepoints"
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-06-21 00:15:12 -04:00
Linus Torvalds b2e09f633a Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more scheduler updates from Ingo Molnar:
 "Second round of scheduler changes:
   - try-to-wakeup and IPI reduction speedups, from Andy Lutomirski
   - continued power scheduling cleanups and refactorings, from Nicolas
     Pitre
   - misc fixes and enhancements"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/deadline: Delete extraneous extern for to_ratio()
  sched/idle: Optimize try-to-wake-up IPI
  sched/idle: Simplify wake_up_idle_cpu()
  sched/idle: Clear polling before descheduling the idle thread
  sched, trace: Add a tracepoint for IPI-less remote wakeups
  cpuidle: Set polling in poll_idle
  sched: Remove redundant assignment to "rt_rq" in update_curr_rt(...)
  sched: Rename capacity related flags
  sched: Final power vs. capacity cleanups
  sched: Remove remaining dubious usage of "power"
  sched: Let 'struct sched_group_power' care about CPU capacity
  sched/fair: Disambiguate existing/remaining "capacity" usage
  sched/fair: Change "has_capacity" to "has_free_capacity"
  sched/fair: Remove "power" from 'struct numa_stats'
  sched: Fix signedness bug in yield_to()
  sched/fair: Use time_after() in record_wakee()
  sched/balancing: Reduce the rate of needless idle load balancing
  sched/fair: Fix unlocked reads of some cfs_b->quota/period
2014-06-12 19:42:15 -07:00
Linus Torvalds 19c1940fea More ACPI and power management updates for 3.16-rc1
- I didn't remember correctly that the Hans de Goede's ACPI video
    patches actually didn't flip the video.use_native_backlight
    default, although we had discussed that and decided to do that.
    Since I said we would do that in the previous PM+ACPI pull
    request, make that change for real now.
 
  - ACPI bus check notifications for PCI host bridges don't cause
    the bus below the host bridge to be checked for changes as they
    should because of a mistake in the ACPI-based PCI hotplug (ACPIPHP)
    subsystem that forgets to add hotplug contexts to PCI host bridge
    ACPI device objects.  Create hotplug contexts for PCI host bridges
    too as appropriate.
 
  - Revert recent cpufreq commit related to the big.LITTLE cpufreq
    driver that breaks arm64 builds.
 
  - Fix for a regression in the ppc-corenet cpufreq driver introduced
    during the 3.15 cycle and causing the driver to use the remainder
    from do_div instead of the quotient.  From Ed Swarthout.
 
  - Resets triggered by panic activate a BUG_ON() in vmalloc.c on
    systems where the ACPI reset register is located in memory address
    space.  Fix from Randy Wright.
 
  - Fix for a problem with cpufreq governors that decisions made by
    them may be suboptimal due to the fact that deferrable timers are
    used by them for CPU load sampling.  From Srivatsa S Bhat.
 
  - Fix for a problem with the Tegra cpufreq driver where the CPU
    frequency is temporarily switched to a "stable" level that
    is different from both the initial and target frequencies
    during transitions which causes udelay() to expire earlier than
    it should sometimes.  From Viresh Kumar.
 
  - New trace points and rework of some existing trace points for
    system suspend/resume profiling from Todd Brandt.
 
  - Assorted cpufreq fixes and cleanups from Stratos Karafotis and
    Viresh Kumar.
 
  - Copyright notice update for suspend-and-cpuhotplug.txt from
    Srivatsa S Bhat.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJTmeBNAAoJEILEb/54YlRxFo0QAIfp74wZO9ZPcrR+6IO1AEUb
 1qcVJYMFWvisG2JO9b7DUtxwgWHk8/NMgKv+bYxUAEni95mY7PqDTdJ+Qjk7DinJ
 jVo+mzooaQg+KYGQ503YOtqsGhNFM3lE6Jw01wbLytTCetkNCkTgr//7btBbyRKn
 13Ut3o2vH9n5EMoe1jql96onJH6AfBDEn7jc5Sk4rGL7MtKAMsWNTNSGVyLFA98l
 sghO8ZR0AqnBzoedr1eBxzo6ujUqjfYlIcxowZycpJJVX02eN+KGUbOJao2+6RB+
 J6wu/FoPv2VtJkNwSB8IMgZfqceecSIXeWBG5xC22cYbSQ/IDW2k72V+kLHUqd36
 LhlYLIsIxJQovqOgPdKeP5o6OVFd4EheWBiCfNBrmYU+x2av6I6ZjTscz3Robaxh
 AVG6yU8XR2GOpoVGW/+L7R2jZ1Qse1Io0r93hXvCsSXgMkq9HbueX3mZR605msfe
 liDk+fym357cKQUreSH1XF0Q79C1wpEJ6rTz0Qi6ZxkKB+dAYE3oPA+V0+cWSxbK
 WqaFjQwPtvrrduvLj5Z+qF/zRu4LXdTxiY59utBek/RoN6zUsMMpwsRCCdBfub2O
 alBOHUPRaiUywkQtqu7yP9j7iciNxEn1/tXo97b/1qC3RrOwLWOgd8dhpWe0i0Gp
 EmQkie8qCHXw5vCpaeUK
 =0lht
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more ACPI and power management updates from Rafael Wysocki:
 "These are fixups on top of the previous PM+ACPI pull request,
  regression fixes (ACPI hotplug, cpufreq ppc-corenet), other bug fixes
  (ACPI reset, cpufreq), new PM trace points for system suspend
  profiling and a copyright notice update.

  Specifics:

   - I didn't remember correctly that the Hans de Goede's ACPI video
     patches actually didn't flip the video.use_native_backlight
     default, although we had discussed that and decided to do that.
     Since I said we would do that in the previous PM+ACPI pull request,
     make that change for real now.

   - ACPI bus check notifications for PCI host bridges don't cause the
     bus below the host bridge to be checked for changes as they should
     because of a mistake in the ACPI-based PCI hotplug (ACPIPHP)
     subsystem that forgets to add hotplug contexts to PCI host bridge
     ACPI device objects.  Create hotplug contexts for PCI host bridges
     too as appropriate.

   - Revert recent cpufreq commit related to the big.LITTLE cpufreq
     driver that breaks arm64 builds.

   - Fix for a regression in the ppc-corenet cpufreq driver introduced
     during the 3.15 cycle and causing the driver to use the remainder
     from do_div instead of the quotient.  From Ed Swarthout.

   - Resets triggered by panic activate a BUG_ON() in vmalloc.c on
     systems where the ACPI reset register is located in memory address
     space.  Fix from Randy Wright.

   - Fix for a problem with cpufreq governors that decisions made by
     them may be suboptimal due to the fact that deferrable timers are
     used by them for CPU load sampling.  From Srivatsa S Bhat.

   - Fix for a problem with the Tegra cpufreq driver where the CPU
     frequency is temporarily switched to a "stable" level that is
     different from both the initial and target frequencies during
     transitions which causes udelay() to expire earlier than it should
     sometimes.  From Viresh Kumar.

   - New trace points and rework of some existing trace points for
     system suspend/resume profiling from Todd Brandt.

   - Assorted cpufreq fixes and cleanups from Stratos Karafotis and
     Viresh Kumar.

   - Copyright notice update for suspend-and-cpuhotplug.txt from
     Srivatsa S Bhat"

* tag 'pm+acpi-3.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / hotplug / PCI: Add hotplug contexts to PCI host bridges
  PM / sleep: trace events for device PM callbacks
  cpufreq: cpufreq-cpu0: remove dependency on THERMAL and REGULATOR
  cpufreq: tegra: update comment for clarity
  cpufreq: intel_pstate: Remove duplicate CPU ID check
  cpufreq: Mark CPU0 driver with CPUFREQ_NEED_INITIAL_FREQ_CHECK flag
  PM / Documentation: Update copyright in suspend-and-cpuhotplug.txt
  cpufreq: governor: remove copy_prev_load from 'struct cpu_dbs_common_info'
  cpufreq: governor: Be friendly towards latency-sensitive bursty workloads
  PM / sleep: trace events for suspend/resume
  cpufreq: ppc-corenet-cpu-freq: do_div use quotient
  Revert "cpufreq: Enable big.LITTLE cpufreq driver on arm64"
  cpufreq: Tegra: implement intermediate frequency callbacks
  cpufreq: add support for intermediate (stable) frequencies
  ACPI / video: Change the default for video.use_native_backlight to 1
  ACPI: Fix bug when ACPI reset register is implemented in system memory
2014-06-12 13:14:19 -07:00
Rafael J. Wysocki d715a226b0 Merge branch 'pm-sleep'
* pm-sleep:
  PM / sleep: trace events for device PM callbacks
  PM / sleep: trace events for suspend/resume
2014-06-12 13:43:08 +02:00
Todd E Brandt e8bca479c3 PM / sleep: trace events for device PM callbacks
Adds two trace events which supply the same info that initcall_debug
provides, but via ftrace instead of dmesg. The existing initcall_debug
calls require the pm_print_times_enabled var to be set (either via
sysfs or via the kernel cmd line). The new trace events provide all the
same info as the initcall_debug prints but with less overhead, and also
with coverage of device prepare and complete device callbacks.

These events replace the device_pm_report_time event (which has been
removed). device_pm_callback_start is called first and provides the device
and callback info. device_pm_callback_end is called after with the
device name and error info. The time and pid are gathered from the trace
data headers.

Signed-off-by: Todd Brandt <todd.e.brandt@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-06-11 02:16:48 +02:00
Linus Torvalds 64b2d1fbbf f2fs updates for v3.16
This patch-set includes the following major enhancement patches.
  o enhance wait_on_page_writeback
  o support SEEK_DATA and SEEK_HOLE
  o enhance readahead flows
  o enhance IO flushes
  o support fiemap
  o add some tracepoints
 
 The other bug fixes are as follows.
  o fix to support a large volume > 2TB correctly
  o recovery bug fix wrt fallocated space
  o fix recursive lock on xattr operations
  o fix some cases on the remount flow
 
 And, there are a bunch of cleanups.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTleLYAAoJEEAUqH6CSFDSdhEP/iY5hTZ02jH4ZiFPP/Nee4hS
 l0BHeZvrMjoccaWUDu0ZvIPC8BiJ7kLOgK+/VWS7LAfY1PY11ALEtYQOrW+RM47+
 jMfULegTod/F8WS2B6dk31QMhAZldtnsYvA5PS1VV3S0rht+qbOz+PDejZFgSMc3
 VVQ7OZzq30gMmtsw7oh3FHfeTu4xe/bxygdMRXgljQQD2MvorJiOb4MA+ovEDd9z
 CZMMTQvRKjc0d8LPf0gOkZEvG63GR6klCgFMuiappUsua0O8IPIEhCyEGFrE66vS
 fObVKpqNAsR2ABhS2grgn6Q7UUvn4xrF6jOwDH5tuw2yzmkQiMAWINwBdgnbEy1c
 D5S89PQ8TkQK9KBSoU0v8WKWC4HzWZF4ZEd6eq9VxVTS8iT0w8DtNHXK518FVC34
 82iqrLc0EhrcGNiW/7Nrc6WzHrWqorylCFN7atB3ruhVqeMh3MZsDU4Gq0WgB2oh
 pF9XVBEpJQpV35DYSAPzLkm+2+mwHVNqwdY3HcvUs7IP90+wZlrWSRG2FEfFt/e8
 6nwvbORrHMTI5VfdYlEPgpjuesFmYPZqEvRGdaDa1YrHqhvvgStEPT9qiq2qVn9+
 tr0HjpNRDD/etkaE6ujYOYqdxuk3mm6RY68h+KSbNcY1/VTvt2bN2telwWuDsxIq
 8yOsxV2x3JB/euDAJsSU
 =xqsO
 -----END PGP SIGNATURE-----

Merge tag 'for-f2fs-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs

Pull f2fs updates from Jaegeuk Kim:
 "In this round, there is no special interesting feature, but we've
  investigated a couple of tuning points with respect to the I/O flow.
  Several major bug fixes and a bunch of clean-ups also have been made.

  This patch-set includes the following major enhancement patches:
   - enhance wait_on_page_writeback
   - support SEEK_DATA and SEEK_HOLE
   - enhance readahead flows
   - enhance IO flushes
   - support fiemap
   - add some tracepoints

  The other bug fixes are as follows:
   - fix to support a large volume > 2TB correctly
   - recovery bug fix wrt fallocated space
   - fix recursive lock on xattr operations
   - fix some cases on the remount flow

  And, there are a bunch of cleanups"

* tag 'for-f2fs-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (52 commits)
  f2fs: support f2fs_fiemap
  f2fs: avoid not to call remove_dirty_inode
  f2fs: recover fallocated space
  f2fs: fix to recover data written by dio
  f2fs: large volume support
  f2fs: avoid crash when trace f2fs_submit_page_mbio event in ra_sum_pages
  f2fs: avoid overflow when large directory feathure is enabled
  f2fs: fix recursive lock by f2fs_setxattr
  MAINTAINERS: add a co-maintainer from samsung for F2FS
  MAINTAINERS: change the email address for f2fs
  f2fs: use inode_init_owner() to simplify codes
  f2fs: avoid to use slab memory in f2fs_issue_flush for efficiency
  f2fs: add a tracepoint for f2fs_read_data_page
  f2fs: add a tracepoint for f2fs_write_{meta,node,data}_pages
  f2fs: add a tracepoint for f2fs_write_{meta,node,data}_page
  f2fs: add a tracepoint for f2fs_write_end
  f2fs: add a tracepoint for f2fs_write_begin
  f2fs: fix checkpatch warning
  f2fs: deactivate inode page if the inode is evicted
  f2fs: decrease the lock granularity during write_begin
  ...
2014-06-09 19:11:44 -07:00
Linus Torvalds 214b931320 Lots of tweaks, small fixes, optimizations, and some helper functions
to help out the rest of the kernel to ease their use of trace events.
 
 The big change for this release is the allowing of other tracers,
 such as the latency tracers, to be used in the trace instances and allow
 for function or function graph tracing to be in the top level
 simultaneously.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJTlbUqAAoJEKQekfcNnQGuP+8H+wTBG06beHsqe6XcaeXcKNkt
 Mimm0O04oQdw89CBWeJvXyOwRTtiN4M/4hxHXBTDtChxM9oUyWw1o0IpSMMuQ16O
 w9r3DfC8e1air+ufEuYWM0QNtyzHi8EfDSNia55ON5jvtkCZTXOEKZD+n8M9w28p
 I7PVgr0PDztsCpethCpg0M8beK9zuQPWMzsHAQCsKI06Xl5z33kPIJR15Exh+Kr1
 uVVTZW7JFVAPuSnteLSIx9pN6OjsVGzOZCljg+O+9/v/02u5nkMiS2nURxae86kg
 RTSiRYT6Hvl/MCBhdss/w5kgSk6BYiZ0hXbLtwetvre+vQrOR5CnDw2DxZ7e+gU=
 =oudH
 -----END PGP SIGNATURE-----

Merge tag 'trace-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:
 "Lots of tweaks, small fixes, optimizations, and some helper functions
  to help out the rest of the kernel to ease their use of trace events.

  The big change for this release is the allowing of other tracers, such
  as the latency tracers, to be used in the trace instances and allow
  for function or function graph tracing to be in the top level
  simultaneously"

* tag 'trace-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits)
  tracing: Fix memory leak on instance deletion
  tracing: Fix leak of ring buffer data when new instances creation fails
  tracing/kprobes: Avoid self tests if tracing is disabled on boot up
  tracing: Return error if ftrace_trace_arrays list is empty
  tracing: Only calculate stats of tracepoint benchmarks for 2^32 times
  tracing: Convert stddev into u64 in tracepoint benchmark
  tracing: Introduce saved_cmdlines_size file
  tracing: Add __get_dynamic_array_len() macro for trace events
  tracing: Remove unused variable in trace_benchmark
  tracing: Eliminate double free on failure of allocation on boot up
  ftrace/x86: Call text_ip_addr() instead of the duplicated code
  tracing: Print max callstack on stacktrace bug
  tracing: Move locking of trace_cmdline_lock into start/stop seq calls
  tracing: Try again for saved cmdline if failed due to locking
  tracing: Have saved_cmdlines use the seq_read infrastructure
  tracing: Add tracepoint benchmark tracepoint
  tracing: Print nasty banner when trace_printk() is in use
  tracing: Add funcgraph_tail option to print function name after closing braces
  tracing: Eliminate duplicate TRACE_GRAPH_PRINT_xx defines
  tracing: Add __bitmask() macro to trace events to cpumasks and other bitmasks
  ...
2014-06-09 16:39:15 -07:00
Linus Torvalds f8409abdc5 Clean ups and miscellaneous bug fixes, in particular for the new
collapse_range and zero_range fallocate functions.  In addition,
 improve the scalability of adding and remove inodes from the orphan
 list.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJTk9x7AAoJENNvdpvBGATwQQ4QAN85xkNWWiq0feLGZjUVTre/
 JUgRQWXZYVogAQckQoTDXqJt1qKYxO45A8oIoUMI4uzgcFJm7iJIZJAv3Hjd2ftz
 48RVwjWHblmBz6e+CdmETpzJUaJr3KXbnk3EDQzagWg3Q64dBU/yT0c4foBO8wfX
 FI1MNin70r5NGQv6Mp4xNUfMoU6liCrsMO2RWkyxY2rcmxy6tkpNO/NBAPwhmn0e
 vwKHvnnqKM08Frrt6Lz3MpXGAJ+rhTSvmL+qSRXQn9BcbphdGa4jy+i3HbviRX4N
 z77UZMgMbfK1V3YHm8KzmmbIHrmIARXUlCM7jp4HPSnb4qhyERrhVmGCJZ8civ6Q
 3Cm9WwA93PQDfRX6Kid3K1tR/ql+ryac55o9SM990osrWp4C0IH+P/CdlSN0GspN
 3pJTLHUVVcxF6gSnOD+q/JzM8Iudl87Rxb17wA+6eg3AJRaPoQSPJoqtwZ89ZwOz
 RiZGuugFp7gDOxqo32lJ53fivO/e1zxXxu0dVHHjOnHBVWX063hlcibTg8kvFWg1
 7bBvUkvgT5jR+UuDX81wPZ+c0kkmfk4gxT5sHg6RlMKeCYi3uuLmAYgla3AM4j9G
 GeNNdVTmilH7wMgYB2wxd0C5HofgKgM5YFLZWc0FVSXMeFs5ST2kbLMXAZqzrKPa
 szHFEJHIGZByXfkP/jix
 =C1ZV
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
 "Clean ups and miscellaneous bug fixes, in particular for the new
  collapse_range and zero_range fallocate functions.  In addition,
  improve the scalability of adding and remove inodes from the orphan
  list"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (25 commits)
  ext4: handle symlink properly with inline_data
  ext4: fix wrong assert in ext4_mb_normalize_request()
  ext4: fix zeroing of page during writeback
  ext4: remove unused local variable "stored" from ext4_readdir(...)
  ext4: fix ZERO_RANGE test failure in data journalling
  ext4: reduce contention on s_orphan_lock
  ext4: use sbi in ext4_orphan_{add|del}()
  ext4: use EXT_MAX_BLOCKS in ext4_es_can_be_merged()
  ext4: add missing BUFFER_TRACE before ext4_journal_get_write_access
  ext4: remove unnecessary double parentheses
  ext4: do not destroy ext4_groupinfo_caches if ext4_mb_init() fails
  ext4: make local functions static
  ext4: fix block bitmap validation when bigalloc, ^flex_bg
  ext4: fix block bitmap initialization under sparse_super2
  ext4: find the group descriptors on a 1k-block bigalloc,meta_bg filesystem
  ext4: avoid unneeded lookup when xattr name is invalid
  ext4: fix data integrity sync in ordered mode
  ext4: remove obsoleted check
  ext4: add a new spinlock i_raw_lock to protect the ext4's raw inode
  ext4: fix locking for O_APPEND writes
  ...
2014-06-08 13:03:35 -07:00
Todd E Brandt bb3632c610 PM / sleep: trace events for suspend/resume
Adds trace events that give finer resolution into suspend/resume. These
events are graphed in the timelines generated by the analyze_suspend.py
script. They represent large areas of time consumed that are typical to
suspend and resume.

The event is triggered by calling the function "trace_suspend_resume"
with three arguments: a string (the name of the event to be displayed
in the timeline), an integer (case specific number, such as the power
state or cpu number), and a boolean (where true is used to denote the start
of the timeline event, and false to denote the end).

The suspend_resume trace event reproduces the data that the machine_suspend
trace event did, so the latter has been removed.

Signed-off-by: Todd Brandt <todd.e.brandt@intel.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-06-07 00:18:07 +02:00
Andy Lutomirski dfc68f29ae sched, trace: Add a tracepoint for IPI-less remote wakeups
Remote wakeups of polling CPUs are a valuable performance
improvement; add a tracepoint to make it much easier to verify that
they're working.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: nicolas.pitre@linaro.org
Cc: daniel.lezcano@linaro.org
Cc: umgwanakikbuti@gmail.com
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/16205aee116772aa686814f9b13bccb562108047.1401902905.git.luto@amacapital.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-06-05 12:09:50 +02:00
Vlastimil Babka f8c9301fa5 mm/compaction: do not count migratepages when unnecessary
During compaction, update_nr_listpages() has been used to count remaining
non-migrated and free pages after a call to migrage_pages().  The
freepages counting has become unneccessary, and it turns out that
migratepages counting is also unnecessary in most cases.

The only situation when it's needed to count cc->migratepages is when
migrate_pages() returns with a negative error code.  Otherwise, the
non-negative return value is the number of pages that were not migrated,
which is exactly the count of remaining pages in the cc->migratepages
list.

Furthermore, any non-zero count is only interesting for the tracepoint of
mm_compaction_migratepages events, because after that all remaining
unmigrated pages are put back and their count is set to 0.

This patch therefore removes update_nr_listpages() completely, and changes
the tracepoint definition so that the manual counting is done only when
the tracepoint is enabled, and only when migrate_pages() returns a
negative error code.

Furthermore, migrate_pages() and the tracepoints won't be called when
there's nothing to migrate.  This potentially avoids some wasted cycles
and reduces the volume of uninteresting mm_compaction_migratepages events
where "nr_migrated=0 nr_failed=0".  In the stress-highalloc mmtest, this
was about 75% of the events.  The mm_compaction_isolate_migratepages event
is better for determining that nothing was isolated for migration, and
this one was just duplicating the info.

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:07 -07:00
Dave Hansen df9024a8c5 mm: shrinker: add nid to tracepoint output
Now that we are doing NUMA-aware shrinking, and can have shrinkers
running in parallel, or working on individual nodes, it seems like we
should also be sticking the node in the output.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Dave Chinner <david@fromorbit.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:04 -07:00
Dave Hansen 7fe7047597 mm: shrinker trace points: fix negatives
I was looking at a trace of the slab shrinkers (attachment in this comment):

	https://bugs.freedesktop.org/show_bug.cgi?id=72742#c67

and noticed that "total_scan" can go negative in some cases.  We
used to dump out the "total_scan" variable directly, but some of
the shrinker modifications along the way changed that.

This patch just dumps it out directly, again.  It doesn't make
any sense to derive it from new_nr and nr any more since there
are now other shrinkers that can be running in parallel and
mucking with those values.

Here's an example of the negative numbers in the output:

>          kswapd0-840   [000]   160.869398: mm_shrink_slab_end:   i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 10 new scan count 39 total_scan 29 last shrinker return val 256
>          kswapd0-840   [000]   160.869618: mm_shrink_slab_end:   i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 39 new scan count 102 total_scan 63 last shrinker return val 256
>          kswapd0-840   [000]   160.870031: mm_shrink_slab_end:   i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 102 new scan count 47 total_scan -55 last shrinker return val 768
>          kswapd0-840   [000]   160.870464: mm_shrink_slab_end:   i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 47 new scan count 45 total_scan -2 last shrinker return val 768
>          kswapd0-840   [000]   163.384144: mm_shrink_slab_end:   i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 45 new scan count 56 total_scan 11 last shrinker return val 0
>          kswapd0-840   [000]   163.384297: mm_shrink_slab_end:   i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 56 new scan count 15 total_scan -41 last shrinker return val 256
>          kswapd0-840   [000]   163.384414: mm_shrink_slab_end:   i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 15 new scan count 117 total_scan 102 last shrinker return val 0
>          kswapd0-840   [000]   163.384657: mm_shrink_slab_end:   i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 117 new scan count 36 total_scan -81 last shrinker return val 512
>          kswapd0-840   [000]   163.384880: mm_shrink_slab_end:   i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 36 new scan count 111 total_scan 75 last shrinker return val 256
>          kswapd0-840   [000]   163.385256: mm_shrink_slab_end:   i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 111 new scan count 34 total_scan -77 last shrinker return val 768
>          kswapd0-840   [000]   163.385598: mm_shrink_slab_end:   i915_gem_inactive_scan+0x0 0xffff8800037cbc68: unused scan count 34 new scan count 122 total_scan 88 last shrinker return val 512

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Dave Chinner <david@fromorbit.com>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:04 -07:00
Vladimir Davydov 52383431b3 mm: get rid of __GFP_KMEMCG
Currently to allocate a page that should be charged to kmemcg (e.g.
threadinfo), we pass __GFP_KMEMCG flag to the page allocator.  The page
allocated is then to be freed by free_memcg_kmem_pages.  Apart from
looking asymmetrical, this also requires intrusion to the general
allocation path.  So let's introduce separate functions that will
alloc/free pages charged to kmemcg.

The new functions are called alloc_kmem_pages and free_kmem_pages.  They
should be used when the caller actually would like to use kmalloc, but
has to fall back to the page allocator for the allocation is large.
They only differ from alloc_pages and free_pages in that besides
allocating or freeing pages they also charge them to the kmem resource
counter of the current memory cgroup.

[sfr@canb.auug.org.au: export kmalloc_order() to modules]
Signed-off-by: Vladimir Davydov <vdavydov@parallels.com>
Acked-by: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Glauber Costa <glommer@gmail.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:53:56 -07:00
Steven Rostedt (Red Hat) beba4bb096 tracing: Add __get_dynamic_array_len() macro for trace events
If a trace event uses a dynamic array for something other than a string
then there's currently no way the TP_printk() can figure out what size
it is. A __get_dynamic_array_len() is required to know the length.

This also simplifies the __get_bitmask() macro which required it as well,
but instead just hardcoded it.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-06-04 14:29:33 -04:00
Linus Torvalds b77279bc2e sound updates for 3.16-rc1
At this time, majority of changes come from ASoC world while we got a
 few new drivers in other places for FireWire and USB.  There have been
 lots of ASoC core cleanups / refactoring, but very little visible to
 external users.
 
 ASoC
 - Support for specifying aux CODECs in DT
 - Removal of the deprecated mux and enum macros
 - More moves towards full componentisation
 - Removal of some unused I/O code
 - Lots of cleanups, fixes and enhancements to the davinci, Freescale,
   Haswell and Realtek drivers
 - Several drivers exposed directly in Kconfig for use with simple-card
 - GPIO descriptor support for jacks
 - More updates and fixes to the Freescale SSI, Intel and rsnd drivers
 - New drivers for Cirrus CS42L56, Realtek RT5639, RT5642 and RT5651 and
   ST STA350, Analog Devices ADAU1361, ADAU1381, ADAU1761 and ADAU1781,
   and Realtek RT5677
 
 HD-audio:
 - Clean up Dell headset quirks
 - Noise fixes for Dell and Sony laptops
 - Thinkpad T440 dock fix
 - Realtek codec updates (ALC293,ALC233,ALC3235)
 - Tegra HD-audio HDMI support
 
 FireWire-audio:
 - FireWire audio stack enhancement (AMDTP, MIDI), support for incoming
   isochronous stream and duplex streams with timestamp synchronization
 - BeBoB-based devices support
 - Fireworks-based device support
 
 USB-audio:
 - Behringer BCD2000 USB device support
 
 Misc:
 - Clean up of a few old drivers, atmel, fm801, etc
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJTjzW4AAoJEGwxgFQ9KSmkUrMP/1z43Kp+F9Y0v0VBH6oR/d4N
 l9IyxBno/ABxfWloGFnRLEyzZyj2yG8A7inT0alVXJifHJN4iPOKBb5dPE9LMRvc
 qLhJjMwznAirkuE8Wsk+IAoKuyXEI4m+KKEIXt5WJ3UyAo/j1lySZVMChzcTFFk/
 oc2C6CciYrQLziaaL/K5zD9v9XdDr9koOaSHK/xjUOCbDlEBJu6T2IvRI/tkqJmy
 8oRRhRteXZ9D959+ftntKrFVf10APQ4ZQbsX/pHboduaoozYAJSJGFhQNbh/UZnb
 zwwwanNZvLwzn+rRXJJuzHF4jra34CuQFL2awsDP9Wck9E3YLmt4audNQ6LM6J8z
 IVZs5IjMIL1ey1T2oRczLnv7EoDp0xdP38GqXnQ88j3zd+Ifi77idNw1ssU1aZ5B
 LzEFEytT1UbEUkqom9qtIG+GId9hSmVmHQuLsc6Ayg7md0oBeJnBC05Xt5FATdrp
 HseHYfSrNNDBFKyj8+j0TVtHc9Xf4SKziSVWz/PT0gaROzOsR2e46HC2Hvut+OFZ
 rLLPXn9up5viQFxOTbO7sdYGCYa/iVH7IwB2oCP6Z5/I8+fhsU7aA4Hl+0wBikin
 PDSwuchmRlNpHJ18YDonjzFtWA51wG4IlcNbQY4ywO/jFae06KYxQPTwvmJI0+oV
 GXyKtjdBnQg8nnWJlS8J
 =nxFA
 -----END PGP SIGNATURE-----

Merge tag 'sound-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into next

Pull sound updates from Takashi Iwai:
 "At this time, majority of changes come from ASoC world while we got a
  few new drivers in other places for FireWire and USB.  There have been
  lots of ASoC core cleanups / refactoring, but very little visible to
  external users.

  ASoC:
   - Support for specifying aux CODECs in DT
   - Removal of the deprecated mux and enum macros
   - More moves towards full componentisation
   - Removal of some unused I/O code
   - Lots of cleanups, fixes and enhancements to the davinci, Freescale,
     Haswell and Realtek drivers
   - Several drivers exposed directly in Kconfig for use with
     simple-card
   - GPIO descriptor support for jacks
   - More updates and fixes to the Freescale SSI, Intel and rsnd drivers
   - New drivers for Cirrus CS42L56, Realtek RT5639, RT5642 and RT5651
     and ST STA350, Analog Devices ADAU1361, ADAU1381, ADAU1761 and
     ADAU1781, and Realtek RT5677

  HD-audio:
   - Clean up Dell headset quirks
   - Noise fixes for Dell and Sony laptops
   - Thinkpad T440 dock fix
   - Realtek codec updates (ALC293,ALC233,ALC3235)
   - Tegra HD-audio HDMI support

  FireWire-audio:
   - FireWire audio stack enhancement (AMDTP, MIDI), support for
     incoming isochronous stream and duplex streams with timestamp
     synchronization
   - BeBoB-based devices support
   - Fireworks-based device support

  USB-audio:
   - Behringer BCD2000 USB device support

  Misc:
   - Clean up of a few old drivers, atmel, fm801, etc"

* tag 'sound-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (480 commits)
  ASoC: Fix wrong argument for card remove callbacks
  ASoC: free jack GPIOs before the sound card is freed
  ALSA: firewire-lib: Remove a comment about restriction of asynchronous operation
  ASoC: cache: Fix error code when not using ASoC level cache
  ALSA: hda/realtek - Fix COEF widget NID for ALC260 replacer fixup
  ALSA: hda/realtek - Correction of fixup codes for PB V7900 laptop
  ALSA: firewire-lib: Use IEC 61883-6 compliant labels for Raw Audio data
  ASoC: add RT5677 CODEC driver
  ASoC: intel: The Baytrail/MAX98090 driver depends on I2C
  ASoC: rt5640: Add the function "get_clk_info" to RL6231 shared support
  ASoC: rt5640: Add the function of the PLL clock calculation to RL6231 shared support
  ASoC: rt5640: Add RL6231 class device shared support for RT5640, RT5645 and RT5651
  ASoC: cache: Fix possible ZERO_SIZE_PTR pointer dereferencing error.
  ASoC: Add helper functions to cast from DAPM context to CODEC/platform
  ALSA: bebob: sizeof() vs ARRAY_SIZE() typo
  ASoC: wm9713: correct mono out PGA sources
  ALSA: synth: emux: soundfont.c: Cleaning up memory leak
  ASoC: fsl: Remove dependencies of boards for SND_SOC_EUKREA_TLV320
  ASoC: fsl-ssi: Use regmap
  ASoC: fsl-ssi: reorder and document fsl_ssi_private
  ...
2014-06-04 09:08:25 -07:00
Jeff Layton 62af4f1f7d locks: add some tracepoints in the lease handling code
v2: add a __break_lease tracepoint for non-blocking case

Recently, I needed these to help track down a softlockup when recalling a
delegation, but they might be helpful in other situations as well.

Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@poochiereds.net>
2014-06-02 08:09:30 -04:00
Mark Brown 0f4019e6f4 Merge remote-tracking branch 'asoc/topic/component' into asoc-next 2014-05-22 00:23:41 +01:00
Steven Rostedt (Red Hat) 4449bf927b tracing: Add __bitmask() macro to trace events to cpumasks and other bitmasks
Being able to show a cpumask of events can be useful as some events
may affect only some CPUs. There is no standard way to record the
cpumask and converting it to a string is rather expensive during
the trace as traces happen in hotpaths. It would be better to record
the raw event mask and be able to parse it at print time.

The following macros were added for use with the TRACE_EVENT() macro:

  __bitmask()
  __assign_bitmask()
  __get_bitmask()

To test this, I added this to the sched_migrate_task event, which
looked like this:

TRACE_EVENT(sched_migrate_task,

	TP_PROTO(struct task_struct *p, int dest_cpu, const struct cpumask *cpus),

	TP_ARGS(p, dest_cpu, cpus),

	TP_STRUCT__entry(
		__array(	char,	comm,	TASK_COMM_LEN	)
		__field(	pid_t,	pid			)
		__field(	int,	prio			)
		__field(	int,	orig_cpu		)
		__field(	int,	dest_cpu		)
		__bitmask(	cpumask, num_possible_cpus()	)
	),

	TP_fast_assign(
		memcpy(__entry->comm, p->comm, TASK_COMM_LEN);
		__entry->pid		= p->pid;
		__entry->prio		= p->prio;
		__entry->orig_cpu	= task_cpu(p);
		__entry->dest_cpu	= dest_cpu;
		__assign_bitmask(cpumask, cpumask_bits(cpus), num_possible_cpus());
	),

	TP_printk("comm=%s pid=%d prio=%d orig_cpu=%d dest_cpu=%d cpumask=%s",
		  __entry->comm, __entry->pid, __entry->prio,
		  __entry->orig_cpu, __entry->dest_cpu,
		  __get_bitmask(cpumask))
);

With the output of:

        ksmtuned-3613  [003] d..2   485.220508: sched_migrate_task: comm=ksmtuned pid=3615 prio=120 orig_cpu=3 dest_cpu=2 cpumask=00000000,0000000f
     migration/1-13    [001] d..5   485.221202: sched_migrate_task: comm=ksmtuned pid=3614 prio=120 orig_cpu=1 dest_cpu=0 cpumask=00000000,0000000f
             awk-3615  [002] d.H5   485.221747: sched_migrate_task: comm=rcu_preempt pid=7 prio=120 orig_cpu=0 dest_cpu=1 cpumask=00000000,000000ff
     migration/2-18    [002] d..5   485.222062: sched_migrate_task: comm=ksmtuned pid=3615 prio=120 orig_cpu=2 dest_cpu=3 cpumask=00000000,0000000f

Link: http://lkml.kernel.org/r/1399377998-14870-6-git-send-email-javi.merino@arm.com
Link: http://lkml.kernel.org/r/20140506132238.22e136d1@gandalf.local.home

Suggested-by: Javi Merino <javi.merino@arm.com>
Tested-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-05-15 11:29:37 -04:00
Linus Torvalds f322e26238 This contains two fixes.
The first is a long standing bug that causes bogus data to show up
 in the refcnt field of the module_refcnt tracepoint. It was
 introduced by a merge conflict resolution back in 2.6.35-rc days.
 
 The result should be refcnt = incs - decs, but instead it did
 refcnt = incs + decs.
 
 The second fix is to a bug that was introduced in this merge window
 that allowed for a tracepoint funcs pointer to be used after it
 was freed. Moving the location of where the probes are released
 solved the problem.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJTa/GQAAoJEKQekfcNnQGuGGUIAJCkrDZdnliE6f6Ur8aXJoX7
 gjkXRMmCjLM/X8yQc1H8YwDbSgaTQNmeyQvBbBZ1hUQBaMf5ft4KuFYMGvQRk3jp
 ZheQVumSzsQfO+yp5dRmzJ6H2G0BCInxq9VZyufZkCPUGsMyiIc+7+SGHEfjMgmW
 9XFWyfSr09thVlGanr+OTLXfwFm7GMD9nohLKXh9dhi/tO/gHq6lI83HK42Y1bWG
 4fZWJjO5GgCVbW4RanB6yr9RIe8NESKl37JYsAZX61iAvT8/mqIYGWx0i/DEGN5Q
 ap3WW5QPALLUlvUVgI9Um0KOrotbmKtnRwPeHYDmSQODwuKj5veiLXxL9XdHPLU=
 =lt0T
 -----END PGP SIGNATURE-----

Merge tag 'trace-fixes-v3.15-rc4-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
 "This contains two fixes.

  The first is a long standing bug that causes bogus data to show up in
  the refcnt field of the module_refcnt tracepoint.  It was introduced
  by a merge conflict resolution back in 2.6.35-rc days.

  The result should be 'refcnt = incs - decs', but instead it did
  'refcnt = incs + decs'.

  The second fix is to a bug that was introduced in this merge window
  that allowed for a tracepoint funcs pointer to be used after it was
  freed.  Moving the location of where the probes are released solved
  the problem"

* tag 'trace-fixes-v3.15-rc4-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracepoint: Fix use of tracepoint funcs after rcu free
  trace: module: Maintain a valid user count
2014-05-08 14:17:13 -07:00
Romain Izard 098507ae3e trace: module: Maintain a valid user count
The replacement of the 'count' variable by two variables 'incs' and
'decs' to resolve some race conditions during module unloading was done
in parallel with some cleanup in the trace subsystem, and was integrated
as a merge.

Unfortunately, the formula for this replacement was wrong in the tracing
code, and the refcount in the traces was not usable as a result.

Use 'count = incs - decs' to compute the user count.

Link: http://lkml.kernel.org/p/1393924179-9147-1-git-send-email-romain.izard.pro@gmail.com

Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: stable@vger.kernel.org # 2.6.35
Fixes: c1ab9cab75 "merge conflict resolution"
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-05-08 07:05:18 -04:00
Chao Yu c20e89cde6 f2fs: add a tracepoint for f2fs_read_data_page
This patch adds a tracepoint for f2fs_read_data_page to trace when page is
readed by user.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07 10:21:59 +09:00
Chao Yu e574843438 f2fs: add a tracepoint for f2fs_write_{meta,node,data}_pages
This patch adds a tracepoint for f2fs_write_{meta,node,data}_pages to trace when
pages are fsyncing/flushing.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07 10:21:59 +09:00
Chao Yu ecda0de343 f2fs: add a tracepoint for f2fs_write_{meta,node,data}_page
This patch adds a tracepoint for f2fs_write_{meta,node,data}_page to trace when
page is writting out.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07 10:21:59 +09:00
Chao Yu dfb2bf38bf f2fs: add a tracepoint for f2fs_write_end
This patch adds a tracepoint for f2fs_write_end to trace write op of user.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07 10:21:59 +09:00
Chao Yu 62aed044ea f2fs: add a tracepoint for f2fs_write_begin
This patch adds a tracepoint for f2fs_write_begin to trace write op of user.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2014-05-07 10:21:59 +09:00
Mathieu Desnoyers 132e9a68a5 Fix: tracing: use 'E' instead of 'X' for unsigned module tain flag
In the following commit:

commit 57673c2b0b
Author: Rusty Russell <rusty@rustcorp.com.au>
Date:   Mon Mar 31 14:39:57 2014 +1030

    Use 'E' instead of 'X' for unsigned module taint flag.

One site has been forgotten in trace events module.h.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
CC: Steven Rostedt <rostedt@goodmis.org>
CC: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-04-23 13:56:51 +09:30
Lars-Peter Clausen 111c0cf566 ASoC: Remove ASoC level IO tracing
The ASoC framework is in the process of migrating all IO operations to regmap.
regmap has its own more sophisticated tracing infrastructure for IO operations,
which means that the ASoC level IO tracing becomes redundant, hence this patch
removes them. There are still a handful of ASoC drivers left that do not use
regmap yet, but hopefully the removal of the ASoC IO tracing will be an
additional incentive to switch to regmap.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-22 13:24:24 +01:00
Lukas Czerner 556615dcbf ext4: rename uninitialized extents to unwritten
Currently in ext4 there is quite a mess when it comes to naming
unwritten extents. Sometimes we call it uninitialized and sometimes we
refer to it as unwritten.

The right name for the extent which has been allocated but does not
contain any written data is _unwritten_. Other file systems are
using this name consistently, even the buffer head state refers to it as
unwritten. We need to fix this confusion in ext4.

This commit changes every reference to an uninitialized extent (meaning
allocated but unwritten) to unwritten extent. This includes comments,
function names and variable names. It even covers abbreviation of the
word uninitialized (such as uninit) and some misspellings.

This commit does not change any of the code paths at all. This has been
confirmed by comparing md5sums of the assembly code of each object file
after all the function names were stripped from it.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-04-20 23:45:47 -04:00
Lukas Czerner 090f32ee4e ext4: get rid of EXT4_MAP_UNINIT flag
Currently EXT4_MAP_UNINIT is used in dioread_nolock case to mark the
cases where we're using dioread_nolock and we're writing into either
unallocated, or unwritten extent, because we need to make sure that
any DIO write into that inode will wait for the extent conversion.

However EXT4_MAP_UNINIT is not only entirely misleading name but also
unnecessary because we can check for EXT4_MAP_UNWRITTEN in the
dioread_nolock case instead.

This commit removes EXT4_MAP_UNINIT flag.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-04-20 23:44:47 -04:00
Linus Torvalds 9ac0367501 These are regression and bug fixes for ext4.
We had a number of new features in ext4 during this merge window
 (ZERO_RANGE and COLLAPSE_RANGE fallocate modes, renameat, etc.) so
 there were many more regression and bug fixes this time around.  It
 didn't help that xfstests hadn't been fully updated to fully stress
 test COLLAPSE_RANGE until after -rc1.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJTVIEUAAoJENNvdpvBGATwnKkQANlzQv6BhgzCa0b5Iu0SkHeD
 OuLAtPFYE5OVEK22oWT0H76gBi71RHLboHwThd+ZfEeEPvyfs42wY0J/PV/R9dHx
 kwhU+MaDDzugfVj3gg29DpYNLQkL/evq0vlNbrRk5je877c2I8JbXV/aAoTVFZoH
 NGOsagwBqWCsgL5nSOk/nEZSRX2AzSCkgmOVxylLzFoyTUkX3vZx8G8XtS1zRgbH
 b1yOWIK1Ifj7tmBZ4HLpNiK6/NpHAHeHRFiaCQxY0hkLjUeMyVNJfZzXS/Fzp8DP
 p1/nm5z9PaFj4nyBC1Wvh9Z6Lj0zQ0ap73LV+w4fHM1SZub3XY+hvyXj/8qMNaSc
 lLIGwa2AZFpurbKKn6MZTi5CubVLZs6PZKzDgYURnEcJCgeMujMOxbKekcL5sP9E
 Gb6Hh9I/f08HagCRox5O0W7f0/TBY5bFryx5kQQZUtpcRmnY3m7cohSkn6WriwTZ
 zYApOZMZkFX5spSeYsfyi8K8wHij/5mXvm7qeqQ0Rj4Ehycd+7jwltOCVXAYN29+
 zSKaBaxH2+V7zuGHSxjDFbOOlPotTFNzGmFh08DPTF4Vgnc9uMlLo0Oz8ADFDcT2
 JZ4pAFTEREnHOATNl5bAEi8wNrU/Ln9IGhlYCYI9X5BQXjf9oPXcYwQT/lKCb07s
 ks8ujfry1R/gjQGuv+LH
 =gi42
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
 "These are regression and bug fixes for ext4.

  We had a number of new features in ext4 during this merge window
  (ZERO_RANGE and COLLAPSE_RANGE fallocate modes, renameat, etc.) so
  there were many more regression and bug fixes this time around.  It
  didn't help that xfstests hadn't been fully updated to fully stress
  test COLLAPSE_RANGE until after -rc1"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (31 commits)
  ext4: disable COLLAPSE_RANGE for bigalloc
  ext4: fix COLLAPSE_RANGE failure with 1KB block size
  ext4: use EINVAL if not a regular file in ext4_collapse_range()
  ext4: enforce we are operating on a regular file in ext4_zero_range()
  ext4: fix extent merging in ext4_ext_shift_path_extents()
  ext4: discard preallocations after removing space
  ext4: no need to truncate pagecache twice in collapse range
  ext4: fix removing status extents in ext4_collapse_range()
  ext4: use filemap_write_and_wait_range() correctly in collapse range
  ext4: use truncate_pagecache() in collapse range
  ext4: remove temporary shim used to merge COLLAPSE_RANGE and ZERO_RANGE
  ext4: fix ext4_count_free_clusters() with EXT4FS_DEBUG and bigalloc enabled
  ext4: always check ext4_ext_find_extent result
  ext4: fix error handling in ext4_ext_shift_extents
  ext4: silence sparse check warning for function ext4_trim_extent
  ext4: COLLAPSE_RANGE only works on extent-based files
  ext4: fix byte order problems introduced by the COLLAPSE_RANGE patches
  ext4: use i_size_read in ext4_unaligned_aio()
  fs: disallow all fallocate operation on active swapfile
  fs: move falloc collapse range check into the filesystem methods
  ...
2014-04-20 20:43:47 -07:00
Theodore Ts'o 50e02fd845 ext4: remove temporary shim used to merge COLLAPSE_RANGE and ZERO_RANGE
In retrospect, this was a bad way to handle things, since it limited
testing of these patches.  We should just get the VFS level changes
merged in first.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-04-14 23:37:35 -04:00
Linus Torvalds 0a7418f5f5 This includes the final patch to clean up and fix the issue with the
design of tracepoints and how a user could register a tracepoint
 and have that tracepoint not be activated but no error was shown.
 
 The design was for an out of tree module but broke in tree users.
 The clean up was to remove the saving of the hash table of tracepoint
 names such that they can be enabled before they exist (enabling
 a module tracepoint before that module is loaded). This added more
 complexity than needed. The clean up was to remove that code and
 just enable tracepoints that exist or fail if they do not.
 
 This removed a lot of code as well as the complexity that it brought.
 As a side effect, instead of registering a tracepoint by its name,
 the tracepoint needs to be registered with the tracepoint descriptor.
 This removes having to duplicate the tracepoint names that are
 enabled.
 
 The second patch was added that simplified the way modules were
 searched for.
 
 This cleanup required changes that were in the 3.15 queue as well as
 some changes that were added late in the 3.14-rc cycle. This final
 change waited till the two were merged in upstream and then the
 change was added and full tests were run. Unfortunately, the
 test found some errors, but after it was already submitted to the
 for-next branch and not to be rebased. Sparse errors were detected
 by Fengguang Wu's bot tests, and my internal tests discovered that
 the anonymous union initialization triggered a bug in older gcc compilers.
 Luckily, there was a bugzilla for the gcc bug which gave a work around
 to the problem. The third and fourth patch handled the sparse error
 and the gcc bug respectively.
 
 A final patch was tagged along to fix a missing documentation for
 the README file.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJTR+pwAAoJEKQekfcNnQGuvfoH/A4XZu4/1h2ZuKhzGi6lrrWr
 +zHUQ+JmGiAYRziQFwr2t/gqJ2vmDfHJnbDjKi6Emx8JcxesHas6CQOWps4zEic0
 dwYSQjvuGNGFIFt+7I0K1OxfVVdt2PQ2lVrB5WgYdbash5J4Bi+09QBv0RbUKheo
 37dKSeN3pbsuQsR70OTVP8laG3dA9IbHW7PsKnxIEB5zeIUHUBME/QdPPj/CuJwk
 wxZjXC2dbc3rdRlQjTVtWV3ZkGgZJB0k+JxjvZTA0N6u8Hj8LiFPuNawzf7ceBHx
 gc++57+WuMW0f0X/ar5/+3UPGFQKMSvKmdxIQCnWXQz5seTYYKDEx7mTH22fxgg=
 =OgeQ
 -----END PGP SIGNATURE-----

Merge tag 'trace-3.15-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull more tracing updates from Steven Rostedt:
 "This includes the final patch to clean up and fix the issue with the
  design of tracepoints and how a user could register a tracepoint and
  have that tracepoint not be activated but no error was shown.

  The design was for an out of tree module but broke in tree users.  The
  clean up was to remove the saving of the hash table of tracepoint
  names such that they can be enabled before they exist (enabling a
  module tracepoint before that module is loaded).  This added more
  complexity than needed.  The clean up was to remove that code and just
  enable tracepoints that exist or fail if they do not.

  This removed a lot of code as well as the complexity that it brought.
  As a side effect, instead of registering a tracepoint by its name, the
  tracepoint needs to be registered with the tracepoint descriptor.
  This removes having to duplicate the tracepoint names that are
  enabled.

  The second patch was added that simplified the way modules were
  searched for.

  This cleanup required changes that were in the 3.15 queue as well as
  some changes that were added late in the 3.14-rc cycle.  This final
  change waited till the two were merged in upstream and then the change
  was added and full tests were run.  Unfortunately, the test found some
  errors, but after it was already submitted to the for-next branch and
  not to be rebased.  Sparse errors were detected by Fengguang Wu's bot
  tests, and my internal tests discovered that the anonymous union
  initialization triggered a bug in older gcc compilers.  Luckily, there
  was a bugzilla for the gcc bug which gave a work around to the
  problem.  The third and fourth patch handled the sparse error and the
  gcc bug respectively.

  A final patch was tagged along to fix a missing documentation for the
  README file"

* tag 'trace-3.15-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Add missing function triggers dump and cpudump to README
  tracing: Fix anonymous unions in struct ftrace_event_call
  tracepoint: Fix sparse warnings in tracepoint.c
  tracepoint: Simplify tracepoint module search
  tracepoint: Use struct pointer instead of name hash for reg/unreg tracepoints
2014-04-12 13:06:10 -07:00
Mathieu Desnoyers abb43f6998 tracing: Fix anonymous unions in struct ftrace_event_call
gcc <= 4.5.x has significant limitations with respect to initialization
of anonymous unions within structures. They need to be surrounded by
brackets, _and_ they need to be initialized in the same order in which
they appear in the structure declaration.

Link: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=10676
Link: http://lkml.kernel.org/r/1397077568-3156-1-git-send-email-mathieu.desnoyers@efficios.com

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-04-09 20:02:55 -04:00
Linus Torvalds 39de65aa2c Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
 "Here is the pull request from the i2c subsystem.  It got a little
  delayed because I needed to wait for a dependency to be included
  (commit b424080a9e08: "reset: Add optional resets and stubs").  Plus,
  I had some email problems.  All done now, the highlights are:

   - drivers can now deprecate their use of i2c classes.  That shouldn't
     be used on embedded platforms anyhow and was often blindly
     copy&pasted.  This mechanism gives users time to switch away and
     ultimately boot faster once the use of classes for those drivers is
     gone for good.

   - new drivers for QUP, Cadence, efm32

   - tracepoint support for I2C and SMBus

   - bigger cleanups for the mv64xxx, nomadik, and designware drivers

  And the usual bugfixes, cleanups, feature additions.  Most stuff has
  been in linux-next for a while.  Just some hot fixes and new drivers
  were added a bit more recently."

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (63 commits)
  i2c: cadence: fix Kconfig dependency
  i2c: Add driver for Cadence I2C controller
  i2c: cadence: Document device tree bindings
  Documentation: i2c: improve section about flags mangling the protocol
  i2c: qup: use proper type fro clk_freq
  i2c: qup: off by ones in qup_i2c_probe()
  i2c: efm32: fix binding doc
  MAINTAINERS: update I2C web resources
  i2c: qup: New bus driver for the Qualcomm QUP I2C controller
  i2c: qup: Add device tree bindings information
  i2c: i2c-xiic: deprecate class based instantiation
  i2c: i2c-sirf: deprecate class based instantiation
  i2c: i2c-mv64xxx: deprecate class based instantiation
  i2c: i2c-designware-platdrv: deprecate class based instantiation
  i2c: i2c-davinci: deprecate class based instantiation
  i2c: i2c-bcm2835: deprecate class based instantiation
  i2c: mv64xxx: Fix reset controller handling
  i2c: omap: fix usage of IS_ERR_VALUE with pm_runtime_get_sync
  i2c: efm32: new bus driver
  i2c: exynos5: remove unnecessary cast of void pointer
  ...
2014-04-09 08:45:40 -07:00
Mathieu Desnoyers b725dfea24 tracepoint: Fix sparse warnings in tracepoint.c
Fix the following sparse warnings:

  CHECK   kernel/tracepoint.c
kernel/tracepoint.c:184:18: warning: incorrect type in assignment (different address spaces)
kernel/tracepoint.c:184:18:    expected struct tracepoint_func *tp_funcs
kernel/tracepoint.c:184:18:    got struct tracepoint_func [noderef] <asn:4>*funcs
kernel/tracepoint.c:216:18: warning: incorrect type in assignment (different address spaces)
kernel/tracepoint.c:216:18:    expected struct tracepoint_func *tp_funcs
kernel/tracepoint.c:216:18:    got struct tracepoint_func [noderef] <asn:4>*funcs
kernel/tracepoint.c:392:24: error: return expression in void function
  CC      kernel/tracepoint.o
kernel/tracepoint.c: In function tracepoint_module_going:
kernel/tracepoint.c:491:6: warning: symbol 'syscall_regfunc' was not declared. Should it be static?
kernel/tracepoint.c:508:6: warning: symbol 'syscall_unregfunc' was not declared. Should it be static?

Link: http://lkml.kernel.org/r/1397049883-28692-1-git-send-email-mathieu.desnoyers@efficios.com

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-04-09 10:12:11 -04:00
Mathieu Desnoyers de7b297390 tracepoint: Use struct pointer instead of name hash for reg/unreg tracepoints
Register/unregister tracepoint probes with struct tracepoint pointer
rather than tracepoint name.

This change, which vastly simplifies tracepoint.c, has been proposed by
Steven Rostedt. It also removes 8.8kB (mostly of text) to the vmlinux
size.

From this point on, the tracers need to pass a struct tracepoint pointer
to probe register/unregister. A probe can now only be connected to a
tracepoint that exists. Moreover, tracers are responsible for
unregistering the probe before the module containing its associated
tracepoint is unloaded.

   text    data     bss     dec     hex filename
10443444        4282528 10391552        25117524        17f4354 vmlinux.orig
10434930        4282848 10391552        25109330        17f2352 vmlinux

Link: http://lkml.kernel.org/r/1396992381-23785-2-git-send-email-mathieu.desnoyers@efficios.com

CC: Ingo Molnar <mingo@kernel.org>
CC: Frederic Weisbecker <fweisbec@gmail.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Frank Ch. Eigler <fche@redhat.com>
CC: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
[ SDR - fixed return val in void func in tracepoint_module_going() ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-04-08 20:43:28 -04:00
Oleg Nesterov 23aebe1691 exec: kill bprm->tcomm[], simplify the "basename" logic
Starting from commit c4ad8f98be ("execve: use 'struct filename *' for
executable name passing") bprm->filename can not go away after
flush_old_exec(), so we do not need to save the binary name in
bprm->tcomm[] added by 96e02d1586 ("exec: fix use-after-free bug in
setup_new_exec()").

And there was never need for filename_to_taskname-like code, we can
simply do set_task_comm(kbasename(filename).

This patch has to change set_task_comm() and trace_task_rename() to
accept "const char *", but I think this change is also good.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:05 -07:00
Linus Torvalds 6f4c98e1c2 Nothing major: the stricter permissions checking for sysfs broke
a staging driver; fix included.  Greg KH said he'd take the patch
 but hadn't as the merge window opened, so it's included here
 to avoid breaking build.
 
 Cheers,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTQMH9AAoJENkgDmzRrbjxo4UP/jwlenP44v+RFpo/dn8Z8E2n
 SREQscU5ZZKvuyFD6kUdvOz8YC/nTrJvXoVkMUF05GVbuvb8/8UPtT9ECVemd0rW
 xNy4aFfv9rbrqRLBLpLK9LAgTuhwlbTgGxgL78zRn3hWmf1hBZWCY+cEvKM8l/+9
 oEQdORL0sUpZh7iryAeGqbOrXT4gqJEvSLOFwiYTSo6ryzWIilmdXSUAh6s8MIEX
 PR1+oH9J8B6J29lcXKMf8/sDI1EBUeSLdBmMCuN5Y7xpYxsQLroVx94kPbdBY+XK
 ZRoYuUGSUJfGRZY46cFKApIGeF07z1DGoyXghbSWEQrI+23TMUmrKUg47LSukE4Y
 yCUf8HAtqIA3gVc9GKDdSp/2UpkAhTTv5ogKgnIzs1InWtOIBdDRSVUQXDosFEXw
 6ZZe1pQs2zfXyXxO4j0Wq36K4RgI0aqOVw+dcC+w5BidjVylgnYRV0PSDd72tid7
 bIfnjDbUBo+o4LanPNGYK474KyO7AslgTE50w6zwbJzgdwCQ36hCpKqScBZzm60a
 42LrgTVoIHHWAL1tDzWL/LzWflZGdJAezzNje0/f2Q3bGMiNHWoljAvUphkTZ7qt
 E8+jWqmM+riH3e8Y5wKpO1BKt7NGHISEy//bUlnqTwisjIzVILZ6VjfugQ1AI+0x
 llTXPBotFvfvXqxunBg7
 =yzUO
 -----END PGP SIGNATURE-----

Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull module updates from Rusty Russell:
 "Nothing major: the stricter permissions checking for sysfs broke a
  staging driver; fix included.  Greg KH said he'd take the patch but
  hadn't as the merge window opened, so it's included here to avoid
  breaking build"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  staging: fix up speakup kobject mode
  Use 'E' instead of 'X' for unsigned module taint flag.
  VERIFY_OCTAL_PERMISSIONS: stricter checking for sysfs perms.
  kallsyms: fix percpu vars on x86-64 with relocation.
  kallsyms: generalize address range checking
  module: LLVMLinux: Remove unused function warning from __param_check macro
  Fix: module signature vs tracepoints: add new TAINT_UNSIGNED_MODULE
  module: remove MODULE_GENERIC_TABLE
  module: allow multiple calls to MODULE_DEVICE_TABLE() per module
  module: use pr_cont
2014-04-06 09:38:07 -07:00
Linus Torvalds 24e7ea3bea Major changes for 3.14 include support for the newly added ZERO_RANGE
and COLLAPSE_RANGE fallocate operations, and scalability improvements
 in the jbd2 layer and in xattr handling when the extended attributes
 spill over into an external block.
 
 Other than that, the usual clean ups and minor bug fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJTPbD2AAoJENNvdpvBGATwDmUQANSfGYIQazB8XKKgtNTMiG/Y
 Ky7n1JzN9lTX/6nMsqQnbfCweLRmxqpWUBuyKDRHUi8IG0/voXSTFsAOOgz0R15A
 ERRRWkVvHixLpohuL/iBdEMFHwNZYPGr3jkm0EIgzhtXNgk5DNmiuMwvHmCY27kI
 kdNZIw9fip/WRNoFLDBGnLGC37aanoHhCIbVlySy5o9LN1pkC8BgXAYV0Rk19SVd
 bWCudSJEirFEqWS5H8vsBAEm/ioxTjwnNL8tX8qms6orZ6h8yMLFkHoIGWPw3Q15
 a0TSUoMyav50Yr59QaDeWx9uaPQVeK41wiYFI2rZOnyG2ts0u0YXs/nLwJqTovgs
 rzvbdl6cd3Nj++rPi97MTA7iXK96WQPjsDJoeeEgnB0d/qPyTk6mLKgftzLTNgSa
 ZmWjrB19kr6CMbebMC4L6eqJ8Fr66pCT8c/iue8wc4MUHi7FwHKH64fqWvzp2YT/
 +165dqqo2JnUv7tIp6sUi1geun+bmDHLZFXgFa7fNYFtcU3I+uY1mRr3eMVAJndA
 2d6ASe/KhQbpVnjKJdQ8/b833ZS3p+zkgVPrd68bBr3t7gUmX91wk+p1ct6rUPLr
 700F+q/pQWL8ap0pU9Ht/h3gEJIfmRzTwxlOeYyOwDseqKuS87PSB3BzV3dDunSU
 DrPKlXwIgva7zq5/S0Vr
 =4s1Z
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
 "Major changes for 3.14 include support for the newly added ZERO_RANGE
  and COLLAPSE_RANGE fallocate operations, and scalability improvements
  in the jbd2 layer and in xattr handling when the extended attributes
  spill over into an external block.

  Other than that, the usual clean ups and minor bug fixes"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (42 commits)
  ext4: fix premature freeing of partial clusters split across leaf blocks
  ext4: remove unneeded test of ret variable
  ext4: fix comment typo
  ext4: make ext4_block_zero_page_range static
  ext4: atomically set inode->i_flags in ext4_set_inode_flags()
  ext4: optimize Hurd tests when reading/writing inodes
  ext4: kill i_version support for Hurd-castrated file systems
  ext4: each filesystem creates and uses its own mb_cache
  fs/mbcache.c: doucple the locking of local from global data
  fs/mbcache.c: change block and index hash chain to hlist_bl_node
  ext4: Introduce FALLOC_FL_ZERO_RANGE flag for fallocate
  ext4: refactor ext4_fallocate code
  ext4: Update inode i_size after the preallocation
  ext4: fix partial cluster handling for bigalloc file systems
  ext4: delete path dealloc code in ext4_ext_handle_uninitialized_extents
  ext4: only call sync_filesystm() when remounting read-only
  fs: push sync_filesystem() down to the file system's remount_fs()
  jbd2: improve error messages for inconsistent journal heads
  jbd2: minimize region locked by j_list_lock in jbd2_journal_forget()
  jbd2: minimize region locked by j_list_lock in journal_get_create_access()
  ...
2014-04-04 15:39:39 -07:00
Linus Torvalds 53c566625f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs changes from Chris Mason:
 "This is a pretty long stream of bug fixes and performance fixes.

  Qu Wenruo has replaced the btrfs async threads with regular kernel
  workqueues.  We'll keep an eye out for performance differences, but
  it's nice to be using more generic code for this.

  We still have some corruption fixes and other patches coming in for
  the merge window, but this batch is tested and ready to go"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (108 commits)
  Btrfs: fix a crash of clone with inline extents's split
  btrfs: fix uninit variable warning
  Btrfs: take into account total references when doing backref lookup
  Btrfs: part 2, fix incremental send's decision to delay a dir move/rename
  Btrfs: fix incremental send's decision to delay a dir move/rename
  Btrfs: remove unnecessary inode generation lookup in send
  Btrfs: fix race when updating existing ref head
  btrfs: Add trace for btrfs_workqueue alloc/destroy
  Btrfs: less fs tree lock contention when using autodefrag
  Btrfs: return EPERM when deleting a default subvolume
  Btrfs: add missing kfree in btrfs_destroy_workqueue
  Btrfs: cache extent states in defrag code path
  Btrfs: fix deadlock with nested trans handles
  Btrfs: fix possible empty list access when flushing the delalloc inodes
  Btrfs: split the global ordered extents mutex
  Btrfs: don't flush all delalloc inodes when we doesn't get s_umount lock
  Btrfs: reclaim delalloc metadata more aggressively
  Btrfs: remove unnecessary lock in may_commit_transaction()
  Btrfs: remove the unnecessary flush when preparing the pages
  Btrfs: just do dirty page flush for the inode with compression before direct IO
  ...
2014-04-04 15:31:36 -07:00
Linus Torvalds 3c83e61e67 Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
 "The main set of series of patches for media subsystem, including:
   - document RC sysfs class
   - added an API to setup scancode to allow waking up systems using the
     Remote Controller
   - add API for SDR devices.  Drivers are still on staging
   - some API improvements for getting EDID data from media
     inputs/outputs
   - new DVB frontend driver for drx-j (ATSC)
   - one driver (it913x/it9137) got removed, in favor of an improvement
     on another driver (af9035)
   - added a skeleton V4L2 PCI driver at documentation
   - added a dual flash driver (lm3646)
   - added a new IR driver (img-ir)
   - added an IR scancode decoder for the Sharp protocol
   - some improvements at the usbtv driver, to allow its core to be
     reused.
   - added a new SDR driver (rtl2832u_sdr)
   - added a new tuner driver (msi001)
   - several improvements at em28xx driver to fix PM support, device
     removal and to split the V4L2 specific bits into a separate
     sub-driver
   - one driver got converted to videobuf2 (s2255drv)
   - the e4000 tuner driver now follows an improved binding model
   - some fixes at V4L2 compat32 code
   - several fixes and enhancements at videobuf2 code
   - some cleanups at V4L2 API documentation
   - usual driver enhancements, new board additions and misc fixups"

[ NOTE! This merge effective drops commit 4329b93b28 ("of: Reduce
  indentation in of_graph_get_next_endpoint").

  The of_graph_get_next_endpoint() function was moved and renamed by
  commit fd9fdb78a9 ("[media] of: move graph helpers from
  drivers/media/v4l2-core to drivers/of").  It was originally called
  v4l2_of_get_next_endpoint() and lived in the file
  drivers/media/v4l2-core/v4l2-of.c.

  In that original location, it was then fixed to support empty port
  nodes by commit b9db140c1e ("[media] v4l: of: Support empty port
  nodes"), and that commit clashes badly with the dropped "Reduce
  intendation" commit.  I had to choose one or the other, and decided
  that the "Support empty port nodes" commit was more important ]

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (426 commits)
  [media] em28xx-dvb: fix PCTV 461e tuner I2C binding
  Revert "[media] em28xx-dvb: fix PCTV 461e tuner I2C binding"
  [media] em28xx: fix PCTV 290e LNA oops
  [media] em28xx-dvb: fix PCTV 461e tuner I2C binding
  [media] m88ds3103: fix bug on .set_tone()
  [media] saa7134: fix WARN_ON during resume
  [media] v4l2-dv-timings: add module name, description, license
  [media] videodev2.h: add parenthesis around macro arguments
  [media] saa6752hs: depends on CRC32
  [media] si4713: fix Kconfig dependencies
  [media] Sensoray 2255 uses videobuf2
  [media] adv7180: free an interrupt on failure paths in init_device()
  [media] e4000: make VIDEO_V4L2 dependency optional
  [media] af9033: Don't export functions for the hardware filter
  [media] af9035: use af9033 PID filters
  [media] af9033: implement PID filter
  [media] rtl2832_sdr: do not use dynamic stack allocation
  [media] e4000: fix 32-bit build error
  [media] em28xx-audio: make sure audio is unmuted on open()
  [media] DocBook media: v4l2_format_sdr was renamed to v4l2_sdr_format
  ...
2014-04-04 09:50:07 -07:00
Linus Torvalds 68114e5eb8 Most of the changes were largely clean ups, and some documentation.
But there were a few features that were added.
 
 Uprobes now work with event triggers and multi buffers.
 Uprobes have support under ftrace and perf.
 
 The big feature is that the function tracer can now be used within the
 multi buffer instances. That is, you can now trace some functions
 in one buffer, others in another buffer, all functions in a third buffer
 and so on. They are basically agnostic from each other. This only
 works for the function tracer and not for the function graph trace,
 although you can have the function graph tracer running in the top level
 buffer (or any tracer for that matter) and have different function tracing
 going on in the sub buffers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJTOthtAAoJEKQekfcNnQGu5c8H/Ana/U+0tmksp1dbHkRHsKSH
 +Fsv4Jeu8gf1NaFKHEhkUTcFtnzE6qAPV2VCrcJwXbhAhhwZm+LjrnWdoy3215S3
 cQW4LftLEonh2cM36Cos74TulMEYN6XmL6dQZV+CILKQkDrWU4qJjQ64okXEkqrd
 9iG3p/mSXyvJcmnyg61ALnMOhZDLsXY3djBhWBPhiTPGS6BRb9zh4Pmw6Zv0n2rJ
 U93Gt/3AQrv1ybu73dUxqP0abp60oXOiWoF/R2jcbKqIM+K9RPJX79unCV3jq3u9
 f+6jMlB9PgAMqQj6ihJdwxKDDuzwyrVdEPnsgvl4jarCBCtVVwhKedBaKN/KS8k=
 =HdXY
 -----END PGP SIGNATURE-----

Merge tag 'trace-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:
 "Most of the changes were largely clean ups, and some documentation.
  But there were a few features that were added:

  Uprobes now work with event triggers and multi buffers and have
  support under ftrace and perf.

  The big feature is that the function tracer can now be used within the
  multi buffer instances.  That is, you can now trace some functions in
  one buffer, others in another buffer, all functions in a third buffer
  and so on.  They are basically agnostic from each other.  This only
  works for the function tracer and not for the function graph trace,
  although you can have the function graph tracer running in the top
  level buffer (or any tracer for that matter) and have different
  function tracing going on in the sub buffers"

* tag 'trace-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (45 commits)
  tracing: Add BUG_ON when stack end location is over written
  tracepoint: Remove unused API functions
  Revert "tracing: Move event storage for array from macro to standalone function"
  ftrace: Constify ftrace_text_reserved
  tracepoints: API doc update to tracepoint_probe_register() return value
  tracepoints: API doc update to data argument
  ftrace: Fix compilation warning about control_ops_free
  ftrace/x86: BUG when ftrace recovery fails
  ftrace: Warn on error when modifying ftrace function
  ftrace: Remove freelist from struct dyn_ftrace
  ftrace: Do not pass data to ftrace_dyn_arch_init
  ftrace: Pass retval through return in ftrace_dyn_arch_init()
  ftrace: Inline the code from ftrace_dyn_table_alloc()
  ftrace: Cleanup of global variables ftrace_new_pgs and ftrace_update_cnt
  tracing: Evaluate len expression only once in __dynamic_array macro
  tracing: Correctly expand len expressions from __dynamic_array macro
  tracing/module: Replace include of tracepoint.h with jump_label.h in module.h
  tracing: Fix event header migrate.h to include tracepoint.h
  tracing: Fix event header writeback.h to include tracepoint.h
  tracing: Warn if a tracepoint is not set via debugfs
  ...
2014-04-03 10:26:31 -07:00
Linus Torvalds cd6362befe Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Here is my initial pull request for the networking subsystem during
  this merge window:

   1) Support for ESN in AH (RFC 4302) from Fan Du.

   2) Add full kernel doc for ethtool command structures, from Ben
      Hutchings.

   3) Add BCM7xxx PHY driver, from Florian Fainelli.

   4) Export computed TCP rate information in netlink socket dumps, from
      Eric Dumazet.

   5) Allow IPSEC SA to be dumped partially using a filter, from Nicolas
      Dichtel.

   6) Convert many drivers to pci_enable_msix_range(), from Alexander
      Gordeev.

   7) Record SKB timestamps more efficiently, from Eric Dumazet.

   8) Switch to microsecond resolution for TCP round trip times, also
      from Eric Dumazet.

   9) Clean up and fix 6lowpan fragmentation handling by making use of
      the existing inet_frag api for it's implementation.

  10) Add TX grant mapping to xen-netback driver, from Zoltan Kiss.

  11) Auto size SKB lengths when composing netlink messages based upon
      past message sizes used, from Eric Dumazet.

  12) qdisc dumps can take a long time, add a cond_resched(), From Eric
      Dumazet.

  13) Sanitize netpoll core and drivers wrt.  SKB handling semantics.
      Get rid of never-used-in-tree netpoll RX handling.  From Eric W
      Biederman.

  14) Support inter-address-family and namespace changing in VTI tunnel
      driver(s).  From Steffen Klassert.

  15) Add Altera TSE driver, from Vince Bridgers.

  16) Optimizing csum_replace2() so that it doesn't adjust the checksum
      by checksumming the entire header, from Eric Dumazet.

  17) Expand BPF internal implementation for faster interpreting, more
      direct translations into JIT'd code, and much cleaner uses of BPF
      filtering in non-socket ocntexts.  From Daniel Borkmann and Alexei
      Starovoitov"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1976 commits)
  netpoll: Use skb_irq_freeable to make zap_completion_queue safe.
  net: Add a test to see if a skb is freeable in irq context
  qlcnic: Fix build failure due to undefined reference to `vxlan_get_rx_port'
  net: ptp: move PTP classifier in its own file
  net: sxgbe: make "core_ops" static
  net: sxgbe: fix logical vs bitwise operation
  net: sxgbe: sxgbe_mdio_register() frees the bus
  Call efx_set_channels() before efx->type->dimension_resources()
  xen-netback: disable rogue vif in kthread context
  net/mlx4: Set proper build dependancy with vxlan
  be2net: fix build dependency on VxLAN
  mac802154: make csma/cca parameters per-wpan
  mac802154: allow only one WPAN to be up at any given time
  net: filter: minor: fix kdoc in __sk_run_filter
  netlink: don't compare the nul-termination in nla_strcmp
  can: c_can: Avoid led toggling for every packet.
  can: c_can: Simplify TX interrupt cleanup
  can: c_can: Store dlc private
  can: c_can: Reduce register access
  can: c_can: Make the code readable
  ...
2014-04-02 20:53:45 -07:00
Linus Torvalds b33ce44299 Merge branch 'for-3.15/drivers' of git://git.kernel.dk/linux-block
Pull block driver update from Jens Axboe:
 "On top of the core pull request, here's the pull request for the
  driver related changes for 3.15.  It contains:

   - Improvements for msi-x registration for block drivers (mtip32xx,
     skd, cciss, nvme) from Alexander Gordeev.

   - A round of cleanups and improvements for drbd from Andreas
     Gruenbacher and Rashika Kheria.

   - A round of clanups and improvements for bcache from Kent.

   - Removal of sleep_on() and friends in DAC960, ataflop, swim3 from
     Arnd Bergmann.

   - Bug fix for a bug in the mtip32xx async completion code from Sam
     Bradshaw.

   - Bug fix for accidentally bouncing IO on 32-bit platforms with
     mtip32xx from Felipe Franciosi"

* 'for-3.15/drivers' of git://git.kernel.dk/linux-block: (103 commits)
  bcache: remove nested function usage
  bcache: Kill bucket->gc_gen
  bcache: Kill unused freelist
  bcache: Rework btree cache reserve handling
  bcache: Kill btree_io_wq
  bcache: btree locking rework
  bcache: Fix a race when freeing btree nodes
  bcache: Add a real GC_MARK_RECLAIMABLE
  bcache: Add bch_keylist_init_single()
  bcache: Improve priority_stats
  bcache: Better alloc tracepoints
  bcache: Kill dead cgroup code
  bcache: stop moving_gc marking buckets that can't be moved.
  bcache: Fix moving_pred()
  bcache: Fix moving_gc deadlocking with a foreground write
  bcache: Fix discard granularity
  bcache: Fix another bug recovering from unclean shutdown
  bcache: Fix a bug recovering from unclean shutdown
  bcache: Fix a journalling reclaim after recovery bug
  bcache: Fix a null ptr deref in journal replay
  ...
2014-04-01 19:43:53 -07:00
Linus Torvalds 7a48837732 Merge branch 'for-3.15/core' of git://git.kernel.dk/linux-block
Pull core block layer updates from Jens Axboe:
 "This is the pull request for the core block IO bits for the 3.15
  kernel.  It's a smaller round this time, it contains:

   - Various little blk-mq fixes and additions from Christoph and
     myself.

   - Cleanup of the IPI usage from the block layer, and associated
     helper code.  From Frederic Weisbecker and Jan Kara.

   - Duplicate code cleanup in bio-integrity from Gu Zheng.  This will
     give you a merge conflict, but that should be easy to resolve.

   - blk-mq notify spinlock fix for RT from Mike Galbraith.

   - A blktrace partial accounting bug fix from Roman Pen.

   - Missing REQ_SYNC detection fix for blk-mq from Shaohua Li"

* 'for-3.15/core' of git://git.kernel.dk/linux-block: (25 commits)
  blk-mq: add REQ_SYNC early
  rt,blk,mq: Make blk_mq_cpu_notify_lock a raw spinlock
  blk-mq: support partial I/O completions
  blk-mq: merge blk_mq_insert_request and blk_mq_run_request
  blk-mq: remove blk_mq_alloc_rq
  blk-mq: don't dump CPU -> hw queue map on driver load
  blk-mq: fix wrong usage of hctx->state vs hctx->flags
  blk-mq: allow blk_mq_init_commands() to return failure
  block: remove old blk_iopoll_enabled variable
  blktrace: fix accounting of partially completed requests
  smp: Rename __smp_call_function_single() to smp_call_function_single_async()
  smp: Remove wait argument from __smp_call_function_single()
  watchdog: Simplify a little the IPI call
  smp: Move __smp_call_function_single() below its safe version
  smp: Consolidate the various smp_call_function_single() declensions
  smp: Teach __smp_call_function_single() to check for offline cpus
  smp: Remove unused list_head from csd
  smp: Iterate functions through llist_for_each_entry_safe()
  block: Stop abusing rq->csd.list in blk-softirq
  block: Remove useless IPI struct initialization
  ...
2014-04-01 19:19:15 -07:00
Linus Torvalds c70929147a sound updates for 3.15-rc1
There have been lots of changes in ALSA core, HD-audio and ASoC, also
 most of PCI drivers touched by conversions of printks.  All these
 resulted in a high volume and wide ranged patch sets in this release.
 Many changes are fairly trivial, but also lots of nice cleanups and
 refactors.  There are a few new drivers, most notably, the Intel
 Haswell and Baytrail ASoC driver.
 
 Core changes:
 - A bit modernization; embed the device struct into snd_card struct,
   so that it may be referred from the beginning.  A new snd_card_new()
   function is introduced for that, and all drivers have been
   converted.
 
 - Simplification in the device management code in ALSA core;
   now managed by a simple priority list instead
 
 - Converted many kernel messages to use the standard dev_err() & co;
   this would be the pretty visible difference, especially for
   HD-audio.
 
 HD-audio:
 - Conexant codecs use the auto-parser as default now;
   the old static code still remains in case of regressions.
   Some old quirks have been rewritten with the fixups for auto-parser.
 
 - C-Media codecs also use the auto-parser as default now, too.
 
 - A device struct is assigned to each HD-audio codec, and the formerly
   hwdep attributes are accessible over the codec sysfs, too.
   hwdep attributes still remain for compatibility.
 
 - Split the PCI-specific stuff for HD-audio controller into a separate
   module, ane make a helper module for the generic controller driver.
   This is a preliminary change for supporting Tegra HDMI controller in
   near future, which slipped from 3.15 merge.
 
 - Device-specific fixes: mute LED support for Lenovo Ideapad,
   mic LED fix for HP laptops, more ASUS subwoofer quirks, yet more
   Dell laptop headset quirks
 
 - Make the HD-audio codec response a bit more robust
 
 - A few improvements on Realtek ALC282 / 283 about the pop noises
 
 - A couple of Intel HDMI fixes
 
 ASoC:
 - Lots of cleanups for enumerations; refactored lots of error prone
   original codes to use more modern APIs
 
 - Elimination of the ASoC level wrappers for I2C and SPI moving us
   closer to converting to regmap completely and avoiding some
   randconfig hassle
 
 - Provide both manually and transparently locked DAPM APIs rather than
   a mix of the two fixing some concurrency issues
 
 - Start converting CODEC drivers to use separate bus interface drivers
   rather than having them all in one file helping avoid dependency
   issues
 
 - DPCM support for Intel Haswell and Bay Trail platforms, lots of
   fixes
 
 - Lots of work on improvements for simple-card, DaVinci and the Renesas
   rcar drivers.
 
 - New drivers for Analog Devices ADAU1977, TI PCM512x and parts of the
   CSR SiRF SoC, TLV320AIC31XXX, Armada 370 DB, Cirrus cs42xx8
 
 - Fixes for the simple-card DAI format DT mess
 
 - DT support for a couple more devices.
 
 - Use of the tdm_slot mapping in a few drivers
 
 Others:
 - Support of reset_resume callback for improved S4 in USB-audio driver;
   the device with boot quirks have been little tested, which we need
   to watch out in this development cycle
 
 - Add PM support for ICE1712 driver (finally!);
   it's still pretty partial support, only for M-Audio devices
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJTOpQ/AAoJEGwxgFQ9KSmkTccP/RUxO1Coysvm+N+NUOtzvIgR
 O++rMDpsFhBSRtB4YvaxAGWRnI629QBc8YSpebxX+KqrGyDe856abgMHydzXJ6hd
 sM6//oaaZ8i0uXXzJza0/HXwIWHup9QcPVyFC4vAQq5mv6OCrH+Pvu7EXc0XbKh7
 7B0ic28+AGPJTqV3sOx48AVzMvNnzPsKGriTWRUJ8Q6QnFqYrO0v6K9IH8/4pftg
 2cihkA4JcIMNtoTSC/kSB3mXBvAX0ZFKQ2Juj1ukZxtXzaYmt9/ZLYPC+EM5OZrH
 Bo4pXrpja38QlFBXYBbxXYWqCXQp+B7CPl8sNXF2rDaRhX8qcFrOP05uqV4wR5HW
 AtCZjmhdvcYCbdUOv+Eck/HesRQMlIRKZN6/NAQBBN/WwrMMD1DmCODBke4uyg3+
 Akb3yMQ0wXq/iSWRY0t5ejNGz9TV7V4NR1QoJS8+fgDnj1oP5sOAfr/BgZBcUIZ/
 np8F77lTqqPqj9kPQnMRBEznvJvQxLRMAMxztCwgEr5520cxqNo02S3hNsOwF0xJ
 t1K1iURZCFxNolSz68eSJOaXo7e77HPwiSze+JCRSfG5qJcltOlvgqO7UC/6wYcZ
 2Z6tv3nGHzrQPVYR0aeWJXZJG8xIrr1Awg0P+G0ky6gfWCAGd7KBP6kYfuFVlytS
 +ztGEe37SxgGGTisoMMh
 =Y476
 -----END PGP SIGNATURE-----

Merge tag 'sound-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "There have been lots of changes in ALSA core, HD-audio and ASoC, also
  most of PCI drivers touched by conversions of printks.  All these
  resulted in a high volume and wide ranged patch sets in this release.
  Many changes are fairly trivial, but also lots of nice cleanups and
  refactors.  There are a few new drivers, most notably, the Intel
  Haswell and Baytrail ASoC driver.

  Core changes:
   - A bit modernization; embed the device struct into snd_card struct,
     so that it may be referred from the beginning.  A new
     snd_card_new() function is introduced for that, and all drivers
     have been converted.

   - Simplification in the device management code in ALSA core; now
     managed by a simple priority list instead

   - Converted many kernel messages to use the standard dev_err() & co;
     this would be the pretty visible difference, especially for
     HD-audio.

  HD-audio:
   - Conexant codecs use the auto-parser as default now; the old static
     code still remains in case of regressions.  Some old quirks have
     been rewritten with the fixups for auto-parser.

   - C-Media codecs also use the auto-parser as default now, too.

   - A device struct is assigned to each HD-audio codec, and the
     formerly hwdep attributes are accessible over the codec sysfs, too.
     hwdep attributes still remain for compatibility.

   - Split the PCI-specific stuff for HD-audio controller into a
     separate module, ane make a helper module for the generic
     controller driver.  This is a preliminary change for supporting
     Tegra HDMI controller in near future, which slipped from 3.15
     merge.

   - Device-specific fixes: mute LED support for Lenovo Ideapad, mic LED
     fix for HP laptops, more ASUS subwoofer quirks, yet more Dell
     laptop headset quirks

   - Make the HD-audio codec response a bit more robust

   - A few improvements on Realtek ALC282 / 283 about the pop noises

   - A couple of Intel HDMI fixes

  ASoC:
   - Lots of cleanups for enumerations; refactored lots of error prone
     original codes to use more modern APIs

   - Elimination of the ASoC level wrappers for I2C and SPI moving us
     closer to converting to regmap completely and avoiding some
     randconfig hassle

   - Provide both manually and transparently locked DAPM APIs rather
     than a mix of the two fixing some concurrency issues

   - Start converting CODEC drivers to use separate bus interface
     drivers rather than having them all in one file helping avoid
     dependency issues

   - DPCM support for Intel Haswell and Bay Trail platforms, lots of
     fixes

   - Lots of work on improvements for simple-card, DaVinci and the
     Renesas rcar drivers.

   - New drivers for Analog Devices ADAU1977, TI PCM512x and parts of
     the CSR SiRF SoC, TLV320AIC31XXX, Armada 370 DB, Cirrus cs42xx8

   - Fixes for the simple-card DAI format DT mess

   - DT support for a couple more devices.

   - Use of the tdm_slot mapping in a few drivers

  Others:
   - Support of reset_resume callback for improved S4 in USB-audio
     driver; the device with boot quirks have been little tested, which
     we need to watch out in this development cycle

   - Add PM support for ICE1712 driver (finally!); it's still pretty
     partial support, only for M-Audio devices"

* tag 'sound-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (610 commits)
  ALSA: ice1712: Add suspend support for M-Audio ICE1712-based cards
  ALSA: ice1712: add suspend support for ICE1712 chip
  ALSA: hda - Enable beep for ASUS 1015E
  ALSA: asihpi: fix some indenting in snd_card_asihpi_pcm_new()
  ALSA: hda - add headset mic detect quirks for three Dell laptops
  ASoC: tegra: move AC97 clock handling to the machine driver
  ASoC: simple-card: Handle many DAI links
  ASoC: simple-card: Add DT documentation for multi-DAI links
  ASoC: simple-card: dynamically allocate the DAI link and properties
  ASoC: imx-ssi: Add .xlate_tdm_slot_mask() support.
  ASoC: fsl-esai: Add .xlate_tdm_slot_mask() support.
  ASoC: fsl-utils: Add fsl_asoc_xlate_tdm_slot_mask() support.
  ASoC: core: remove the 'of_' prefix of of_xlate_tdm_slot_mask.
  ASoC: rcar: subnode tidyup for renesas,rsnd.txt
  ASoC: Remove name_prefix unset during DAI link init hack
  ALSA: hda - Inform the unexpectedly ignored pins by auto-parser
  ASoC: rcar: bugfix: it cares about the non-src case
  ARM: bockw: fixup SND_SOC_DAIFMT_CBx_CFx flags
  ASoC: pcm: Drop incorrect double/extra frees
  ASoC: mfld_machine: Fix compile error
  ...
2014-04-01 15:38:47 -07:00
Linus Torvalds 4dedde7c7a ACPI and power management updates for 3.15-rc1
- Device PM QoS support for latency tolerance constraints on systems with
    hardware interfaces allowing such constraints to be specified.  That is
    necessary to prevent hardware-driven power management from becoming
    overly aggressive on some systems and to prevent power management
    features leading to excessive latencies from being used in some cases.
 
  - Consolidation of the handling of ACPI hotplug notifications for device
    objects.  This causes all device hotplug notifications to go through
    the root notify handler (that was executed for all of them anyway
    before) that propagates them to individual subsystems, if necessary,
    by executing callbacks provided by those subsystems (those callbacks
    are associated with struct acpi_device objects during device
    enumeration).  As a result, the code in question becomes both smaller
    in size and more straightforward and all of those changes should not
    affect users.
 
  - ACPICA update, including fixes related to the handling of _PRT in cases
    when it is broken and the addition of "Windows 2013" to the list of
    supported "features" for _OSI (which is necessary to support systems
    that work incorrectly or don't even boot without it).  Changes from
    Bob Moore and Lv Zheng.
 
  - Consolidation of ACPI _OST handling from Jiang Liu.
 
  - ACPI battery and AC fixes allowing unusual system configurations to
    be handled by that code from Alexander Mezin.
 
  - New device IDs for the ACPI LPSS driver from Chiau Ee Chew.
 
  - ACPI fan and thermal optimizations related to system suspend and resume
    from Aaron Lu.
 
  - Cleanups related to ACPI video from Jean Delvare.
 
  - Assorted ACPI fixes and cleanups from Al Stone, Hanjun Guo, Lan Tianyu,
    Paul Bolle, Tomasz Nowicki.
 
  - Intel RAPL (Running Average Power Limits) driver cleanups from Jacob Pan.
 
  - intel_pstate fixes and cleanups from Dirk Brandewie.
 
  - cpufreq fixes related to system suspend/resume handling from Viresh Kumar.
 
  - cpufreq core fixes and cleanups from Viresh Kumar, Stratos Karafotis,
    Saravana Kannan, Rashika Kheria, Joe Perches.
 
  - cpufreq drivers updates from Viresh Kumar, Zhuoyu Zhang, Rob Herring.
 
  - cpuidle fixes related to the menu governor from Tuukka Tikkanen.
 
  - cpuidle fix related to coupled CPUs handling from Paul Burton.
 
  - Asynchronous execution of all device suspend and resume callbacks,
    except for ->prepare and ->complete, during system suspend and resume
    from Chuansheng Liu.
 
  - Delayed resuming of runtime-suspended devices during system suspend for
    the PCI bus type and ACPI PM domain.
 
  - New set of PM helper routines to allow device runtime PM callbacks to
    be used during system suspend and resume more easily from Ulf Hansson.
 
  - Assorted fixes and cleanups in the PM core from Geert Uytterhoeven,
    Prabhakar Lad, Philipp Zabel, Rashika Kheria, Sebastian Capella.
 
  - devfreq fix from Saravana Kannan.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJTLgB1AAoJEILEb/54YlRxfs4P/35fIu9h8ClNWUPXqi3nlGIt
 yMyumKvF1VdsOKLbjTtFq6B3UOlhqDijYTCQd7Xt7X8ONTk/ND9ec2t/5xGkSdUI
 q46fa0qZXeqUn0Kt2t+kl6tgVQOkDj94aNlEh+7Ya3Uu6WYDDfmZtOBOFAMk6D8l
 ND4rHJpX+eUsRLBrcxaUxxdD8AW5guGcPKyeyzsXv1bY1BZnpLFrZ3PhuI5dn2CL
 L/zmk3A+wG6+ZlQxnwDdrKa3E6uhRSIDeF0vI4Byspa1wi5zXknJG2J7MoQ9JEE9
 VQpBXlqach5wgXqJ8PAqAeaB6Ie26/F7PYG8r446zKw/5UUtdNUx+0dkjQ7Mz8Tu
 ajuVxfwrrPhZeQqmVBxlH5Gg7Ez2KBKEfDxTdRnzI7FoA7PE5XDcg3kO64bhj8LJ
 yugnV/ToU9wMztZnPC7CoGPwUgxMJvr9LwmxS4aeKcVUBES05eg0vS3lwdZMgqkV
 iO0QkWTmhZ952qZCqZxbh0JqaaX8Wgx2kpX2tf1G2GJqLMZco289bLh6njNT+8CH
 EzdQKYYyn6G6+Qg2M0f/6So3qU17x9XtE4ZBWQdGDpqYOGZhjZAOs/VnB1Ysw/K3
 cDBzswlJd0CyyUps9B+qbf49OpbWVwl5kKeuHUuPxugEVryhpSp9AuG+tNil74Sj
 JuGTGR4fyFjDBX5cvAPm
 =ywR6
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael Wysocki:
 "The majority of this material spent some time in linux-next, some of
  it even several weeks.  There are a few relatively fresh commits in
  it, but they are mostly fixes and simple cleanups.

  ACPI took the lead this time, both in terms of the number of commits
  and the number of modified lines of code, cpufreq follows and there
  are a few changes in the PM core and in cpuidle too.

  A new feature that already got some LWN.net's attention is the device
  PM QoS extension allowing latency tolerance requirements to be
  propagated from leaf devices to their ancestors with hardware
  interfaces for specifying latency tolerance.  That should help systems
  with hardware-driven power management to avoid going too far with it
  in cases when there are latency tolerance constraints.

  There also are some significant changes in the ACPI core related to
  the way in which hotplug notifications are handled.  They affect PCI
  hotplug (ACPIPHP) and the ACPI dock station code too.  The bottom line
  is that all those notification now go through the root notify handler
  and are propagated to the interested subsystems by means of callbacks
  instead of having to install a notify handler for each device object
  that we can potentially get hotplug notifications for.

  In addition to that ACPICA will now advertise "Windows 2013"
  compatibility for _OSI, because some systems out there don't work
  correctly if that is not done (some of them don't even boot).

  On the system suspend side of things, all of the device suspend and
  resume callbacks, except for ->prepare() and ->complete(), are now
  going to be executed asynchronously as that turns out to speed up
  system suspend and resume on some platforms quite significantly and we
  have a few more optimizations in that area.

  Apart from that, there are some new device IDs and fixes and cleanups
  all over.  In particular, the system suspend and resume handling by
  cpufreq should be improved and the cpuidle menu governor should be a
  bit more robust now.

  Specifics:

   - Device PM QoS support for latency tolerance constraints on systems
     with hardware interfaces allowing such constraints to be specified.
     That is necessary to prevent hardware-driven power management from
     becoming overly aggressive on some systems and to prevent power
     management features leading to excessive latencies from being used
     in some cases.

   - Consolidation of the handling of ACPI hotplug notifications for
     device objects.  This causes all device hotplug notifications to go
     through the root notify handler (that was executed for all of them
     anyway before) that propagates them to individual subsystems, if
     necessary, by executing callbacks provided by those subsystems
     (those callbacks are associated with struct acpi_device objects
     during device enumeration).  As a result, the code in question
     becomes both smaller in size and more straightforward and all of
     those changes should not affect users.

   - ACPICA update, including fixes related to the handling of _PRT in
     cases when it is broken and the addition of "Windows 2013" to the
     list of supported "features" for _OSI (which is necessary to
     support systems that work incorrectly or don't even boot without
     it).  Changes from Bob Moore and Lv Zheng.

   - Consolidation of ACPI _OST handling from Jiang Liu.

   - ACPI battery and AC fixes allowing unusual system configurations to
     be handled by that code from Alexander Mezin.

   - New device IDs for the ACPI LPSS driver from Chiau Ee Chew.

   - ACPI fan and thermal optimizations related to system suspend and
     resume from Aaron Lu.

   - Cleanups related to ACPI video from Jean Delvare.

   - Assorted ACPI fixes and cleanups from Al Stone, Hanjun Guo, Lan
     Tianyu, Paul Bolle, Tomasz Nowicki.

   - Intel RAPL (Running Average Power Limits) driver cleanups from
     Jacob Pan.

   - intel_pstate fixes and cleanups from Dirk Brandewie.

   - cpufreq fixes related to system suspend/resume handling from Viresh
     Kumar.

   - cpufreq core fixes and cleanups from Viresh Kumar, Stratos
     Karafotis, Saravana Kannan, Rashika Kheria, Joe Perches.

   - cpufreq drivers updates from Viresh Kumar, Zhuoyu Zhang, Rob
     Herring.

   - cpuidle fixes related to the menu governor from Tuukka Tikkanen.

   - cpuidle fix related to coupled CPUs handling from Paul Burton.

   - Asynchronous execution of all device suspend and resume callbacks,
     except for ->prepare and ->complete, during system suspend and
     resume from Chuansheng Liu.

   - Delayed resuming of runtime-suspended devices during system suspend
     for the PCI bus type and ACPI PM domain.

   - New set of PM helper routines to allow device runtime PM callbacks
     to be used during system suspend and resume more easily from Ulf
     Hansson.

   - Assorted fixes and cleanups in the PM core from Geert Uytterhoeven,
     Prabhakar Lad, Philipp Zabel, Rashika Kheria, Sebastian Capella.

   - devfreq fix from Saravana Kannan"

* tag 'pm+acpi-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (162 commits)
  PM / devfreq: Rewrite devfreq_update_status() to fix multiple bugs
  PM / sleep: Correct whitespace errors in <linux/pm.h>
  intel_pstate: Set core to min P state during core offline
  cpufreq: Add stop CPU callback to cpufreq_driver interface
  cpufreq: Remove unnecessary braces
  cpufreq: Fix checkpatch errors and warnings
  cpufreq: powerpc: add cpufreq transition latency for FSL e500mc SoCs
  MAINTAINERS: Reorder maintainer addresses for PM and ACPI
  PM / Runtime: Update runtime_idle() documentation for return value meaning
  video / output: Drop display output class support
  fujitsu-laptop: Drop unneeded include
  acer-wmi: Stop selecting VIDEO_OUTPUT_CONTROL
  ACPI / gpu / drm: Stop selecting VIDEO_OUTPUT_CONTROL
  ACPI / video: fix ACPI_VIDEO dependencies
  cpufreq: remove unused notifier: CPUFREQ_{SUSPENDCHANGE|RESUMECHANGE}
  cpufreq: Do not allow ->setpolicy drivers to provide ->target
  cpufreq: arm_big_little: set 'physical_cluster' for each CPU
  cpufreq: arm_big_little: make vexpress driver depend on bL core driver
  ACPI / button: Add ACPI Button event via netlink routine
  ACPI: Remove duplicate definitions of PREFIX
  ...
2014-04-01 12:48:54 -07:00
Tom Herbert 61b905da33 net: Rename skb->rxhash to skb->hash
The packet hash can be considered a property of the packet, not just
on RX path.

This patch changes name of rxhash and l4_rxhash skbuff fields to be
hash and l4_hash respectively. This includes changing uses of the
field in the code which don't call the access functions.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-26 15:58:20 -04:00
Mark Brown ba052e1b31 ASoC: Updates for v3.15
Quite a busy release for ASoC this time, more on janitorial work than
 exciting new features but welcome nontheless:
 
  - Lots of cleanups from Takashi for enumerations; the original API for
    these was error prone so he's refactored lots of code to use more
    modern APIs which avoid issues.
  - Elimination of the ASoC level wrappers for I2C and SPI moving us
    closer to converting to regmap completely and avoiding some
    randconfig hassle.
  - Provide both manually and transparently locked DAPM APIs rather than
    a mix of the two fixing some concurrency issues.
  - Start converting CODEC drivers to use separate bus interface drivers
    rather than having them all in one file helping avoid dependency
    issues.
  - DPCM support for Intel Haswell and Bay Trail platforms.
  - Lots of work on improvements for simple-card, DaVinci and the Renesas
    rcar drivers.
  - New drivers for Analog Devices ADAU1977, TI PCM512x and parts of the
    CSR SiRF SoC.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTIOhJAAoJELSic+t+oim90CoP/3CVTm9cWv1qhPSU6jjn6RJG
 /djmhntJfHd/GXo+0TiiwNK9WmZjFrJUr+5ofkDTCqSzFz1Suc90B6oHxY4dFbgF
 IyIpTexGwTLv3H6yDjadYAfmGDSsE9sM2dkID9oXy6aEzjNby/a1VEiBnRgx16X1
 YGvMVK8AGFn/AyC/zOV6EcKJxUjdDogqZ5wkR2XHzwDoYjl9ufxK9BnSIygYABOW
 ABAjyrZf3xx97AH82BB6iqcZMh5GxGNTvI3hQd/vjx0r7RFUDNLqmF2cPZAMTRW/
 bXWxVmtNHie1+lCldyMFm8pV/Pv09zuqDAQKbPY2TeHj2zF8CM548NlkFHqwHlp0
 S9K5E1N+/2wcXMjQa1wBELohUdl6dVh1OFOAz7M8o0TJdSOZyR6PJ9r0NprP8NgS
 67FBU+ZqnWIK159m9rKkFfPhnaDuDzk+rpwyK0fQxQgpdGGjLyv7OK3GhS30oTnA
 Z2GjEyUySM1BcEEWAtfUD5fHbjN28e1Icn53q5q4JK4gvx4DXBy08uY/vumvjXjO
 8oum3q3RjRvqIhzMrJoVgs+c8RHwS/bZQhlu9Q3qNTsDNDyMnaZWHFAnP8RDqHjv
 ojZiMJkJdpqceZ3z1k5ZG8GWJ2JaZBikSbeNk2Ltg17/0nackq2r8ekrIoEUPVk2
 ph4DJNC2s1qCFtx7tzQj
 =C5oo
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v3.15' into asoc-next

ASoC: Updates for v3.15

Quite a busy release for ASoC this time, more on janitorial work than
exciting new features but welcome nontheless:

 - Lots of cleanups from Takashi for enumerations; the original API for
   these was error prone so he's refactored lots of code to use more
   modern APIs which avoid issues.
 - Elimination of the ASoC level wrappers for I2C and SPI moving us
   closer to converting to regmap completely and avoiding some
   randconfig hassle.
 - Provide both manually and transparently locked DAPM APIs rather than
   a mix of the two fixing some concurrency issues.
 - Start converting CODEC drivers to use separate bus interface drivers
   rather than having them all in one file helping avoid dependency
   issues.
 - DPCM support for Intel Haswell and Bay Trail platforms.
 - Lots of work on improvements for simple-card, DaVinci and the Renesas
   rcar drivers.
 - New drivers for Analog Devices ADAU1977, TI PCM512x and parts of the
   CSR SiRF SoC.

# gpg: Signature made Wed 12 Mar 2014 23:05:45 GMT using RSA key ID 7EA229BD
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"
2014-03-25 21:22:01 +00:00
Steven Rostedt (Red Hat) bc4c426ee2 Revert "tracing: Move event storage for array from macro to standalone function"
I originally wrote commit 35bb4399bd to shrink the size of the overhead of
tracepoints by several kilobytes. Later, I received a patch from Vaibhav
Nagarnaik that fixed a bug in the same code that this commit touches. Not
only did it fix a bug, it also removed code and shrunk the size of the
overhead of trace events even more than this commit did.

Since this commit is scheduled for 3.15 and Vaibhav's patch is already in
mainline, I need to revert this patch in order to keep it from conflicting
with Vaibhav's patch. Not to mention, Vaibhav's patch makes this patch
obsolete.

Link: http://lkml.kernel.org/r/20140320225637.0226041b@gandalf.local.home

Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-03-21 13:11:41 -04:00
Qu Wenruo c3a468915a btrfs: Add trace for btrfs_workqueue alloc/destroy
Since most of the btrfs_workqueue is printed as pointer address,
for easier analysis, add trace for btrfs_workqueue alloc/destroy.
So it is possible to determine the workqueue that a given work belongs
to(by comparing the wq pointer address with alloc trace event).

Signed-off-by: Qu Wenruo <quenruo@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-03-20 17:15:28 -07:00
Vaibhav Nagarnaik 87291347c4 tracing: Fix array size mismatch in format string
In event format strings, the array size is reported in two locations.
One in array subscript and then via the "size:" attribute. The values
reported there have a mismatch.

For e.g., in sched:sched_switch the prev_comm and next_comm character
arrays have subscript values as [32] where as the actual field size is
16.

name: sched_switch
ID: 301
format:
        field:unsigned short common_type;       offset:0;       size:2; signed:0;
        field:unsigned char common_flags;       offset:2;       size:1; signed:0;
        field:unsigned char common_preempt_count;       offset:3;       size:1;signed:0;
        field:int common_pid;   offset:4;       size:4; signed:1;

        field:char prev_comm[32];       offset:8;       size:16;        signed:1;
        field:pid_t prev_pid;   offset:24;      size:4; signed:1;
        field:int prev_prio;    offset:28;      size:4; signed:1;
        field:long prev_state;  offset:32;      size:8; signed:1;
        field:char next_comm[32];       offset:40;      size:16;        signed:1;
        field:pid_t next_pid;   offset:56;      size:4; signed:1;
        field:int next_prio;    offset:60;      size:4; signed:1;

After bisection, the following commit was blamed:
92edca0 tracing: Use direct field, type and system names

This commit removes the duplication of strings for field->name and
field->type assuming that all the strings passed in
__trace_define_field() are immutable. This is not true for arrays, where
the type string is created in event_storage variable and field->type for
all array fields points to event_storage.

Use __stringify() to create a string constant for the type string.

Also, get rid of event_storage and event_storage_mutex that are not
needed anymore.

also, an added benefit is that this reduces the overhead of events a bit more:

   text    data     bss     dec     hex filename
8424787 2036472 1302528 11763787         b3804b vmlinux
8420814 2036408 1302528 11759750         b37086 vmlinux.patched

Link: http://lkml.kernel.org/r/1392349908-29685-1-git-send-email-vnagarnaik@google.com

Cc: Laurent Chavey <chavey@google.com>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-03-20 13:21:05 -04:00
Rafael J. Wysocki 165f5fd04a Merge branches 'pm-qos', 'pm-domains' and 'pm-drivers'
* pm-qos:
  PM / QoS: Add type to dev_pm_qos_add_ancestor_request() arguments
  ACPI / LPSS: Support for device latency tolerance PM QoS
  ACPI / scan: Add bind/unbind callbacks to struct acpi_scan_handler
  PM / QoS: Introcuce latency tolerance device PM QoS type
  PM / QoS: Add no_constraints_value field to struct pm_qos_constraints
  PM / QoS: Rename device resume latency QoS items

* pm-domains:
  PM / domains: Turn latency warning into debug message

* pm-drivers:
  PM: Add pm_runtime_suspend|resume_force functions
  PM / runtime: Fetch runtime PM callbacks using a macro
2014-03-20 13:25:36 +01:00
Lukas Czerner b8a8684502 ext4: Introduce FALLOC_FL_ZERO_RANGE flag for fallocate
Introduce new FALLOC_FL_ZERO_RANGE flag for fallocate. This has the same
functionality as xfs ioctl XFS_IOC_ZERO_RANGE.

It can be used to convert a range of file to zeros preferably without
issuing data IO. Blocks should be preallocated for the regions that span
holes in the file, and the entire range is preferable converted to
unwritten extents

This can be also used to preallocate blocks past EOF in the same way as
with fallocate. Flag FALLOC_FL_KEEP_SIZE which should cause the inode
size to remain the same.

Also add appropriate tracepoints.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-03-18 18:05:35 -04:00
Kent Overstreet 2531d9ee61 bcache: Kill unused freelist
This was originally added as at optimization that for various reasons isn't
needed anymore, but it does add a lot of nasty corner cases (and it was
responsible for some recently fixed bugs). Just get rid of it now.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-03-18 12:23:36 -07:00
Kent Overstreet 7159b1ad3d bcache: Better alloc tracepoints
Change the invalidate tracepoint to indicate how much data we're invalidating,
and change the alloc tracepoints to indicate what offset they're for.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-03-18 12:22:35 -07:00
David Howells 8a325997d9 i2c: Add message transfer tracepoints for SMBUS [ver #2]
The SMBUS tracepoints can be enabled thusly:

	echo 1 >/sys/kernel/debug/tracing/events/i2c/enable

and will dump messages that can be viewed in /sys/kernel/debug/tracing/trace
that look like:

         ... smbus_read: i2c-0 a=051 f=0000 c=fa BYTE_DATA
         ... smbus_reply: i2c-0 a=051 f=0000 c=fa BYTE_DATA l=1 [39]
         ... smbus_result: i2c-0 a=051 f=0000 c=fa BYTE_DATA rd res=0

formatted as:

	i2c-<adapter-nr>
	a=<addr>
	f=<flags>
	c=<command>
	<protocol-name>
	<rd|wr>
	res=<result>
	l=<data-len>
	[<data-block>]

The adapters to be traced can be selected by something like:

	echo adapter_nr==1 >/sys/kernel/debug/tracing/events/i2c/filter

Note that this shares the same filter and enablement as i2c.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-03-13 22:15:07 +01:00
David Howells d9a83d62b3 i2c: Add message transfer tracepoints for I2C
Add tracepoints into the I2C message transfer function to retrieve the message
sent or received.  The following config options must be turned on to make use
of the facility:

	CONFIG_FTRACE
	CONFIG_ENABLE_DEFAULT_TRACERS

The I2C tracepoint can be enabled thusly:

	echo 1 >/sys/kernel/debug/tracing/events/i2c/enable

and will dump messages that can be viewed in /sys/kernel/debug/tracing/trace
that look like:

	... i2c_write: i2c-5 #0 a=044 f=0000 l=2 [02-14]
	... i2c_read: i2c-5 #1 a=044 f=0001 l=4
	... i2c_reply: i2c-5 #1 a=044 f=0001 l=4 [33-00-00-00]
	... i2c_result: i2c-5 n=2 ret=2

formatted as:

	i2c-<adapter-nr>
	#<message-array-index>
	a=<addr>
	f=<flags>
	l=<datalen>
	n=<message-array-size>
	ret=<result>
	[<data>]

The operation is done between the i2c_write/i2c_read lines and the i2c_reply
and i2c_result lines so that if the hardware hangs, the trace buffer can be
consulted to determine the problematic operation.

The adapters to be traced can be selected by something like:

	echo adapter_nr==1 >/sys/kernel/debug/tracing/events/i2c/filter

These changes are based on code from Steven Rostedt.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
[wsa: adapted path for 'enable' in the commit msg]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-03-13 22:12:53 +01:00
Mathieu Desnoyers 66cc69e34e Fix: module signature vs tracepoints: add new TAINT_UNSIGNED_MODULE
Users have reported being unable to trace non-signed modules loaded
within a kernel supporting module signature.

This is caused by tracepoint.c:tracepoint_module_coming() refusing to
take into account tracepoints sitting within force-loaded modules
(TAINT_FORCED_MODULE). The reason for this check, in the first place, is
that a force-loaded module may have a struct module incompatible with
the layout expected by the kernel, and can thus cause a kernel crash
upon forced load of that module on a kernel with CONFIG_TRACEPOINTS=y.

Tracepoints, however, specifically accept TAINT_OOT_MODULE and
TAINT_CRAP, since those modules do not lead to the "very likely system
crash" issue cited above for force-loaded modules.

With kernels having CONFIG_MODULE_SIG=y (signed modules), a non-signed
module is tainted re-using the TAINT_FORCED_MODULE taint flag.
Unfortunately, this means that Tracepoints treat that module as a
force-loaded module, and thus silently refuse to consider any tracepoint
within this module.

Since an unsigned module does not fit within the "very likely system
crash" category of tainting, add a new TAINT_UNSIGNED_MODULE taint flag
to specifically address this taint behavior, and accept those modules
within Tracepoints. We use the letter 'X' as a taint flag character for
a module being loaded that doesn't know how to sign its name (proposed
by Steven Rostedt).

Also add the missing 'O' entry to trace event show_module_flags() list
for the sake of completeness.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
NAKed-by: Ingo Molnar <mingo@redhat.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: David Howells <dhowells@redhat.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-03-13 12:11:51 +10:30
Mark Brown a4b12990b6 Merge remote-tracking branches 'asoc/topic/ml26124', 'asoc/topic/of', 'asoc/topic/omap', 'asoc/topic/pxa' and 'asoc/topic/rcar' into asoc-next 2014-03-12 23:04:35 +00:00
Mauro Carvalho Chehab c897df0e2d Linux 3.14-rc5
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJTE+9XAAoJEHm+PkMAQRiGrMQIAKI2V49Kj8WlnwGchFvsbGJB
 SLALwNi33T/IBKdZRhrfryBu02Zj7eVvZ2ML35dJEnmF88O+dJBDMTkKV1xalrip
 mtkBrjUnfAI04fq/daLQ1TsAy4qqlra5tSTuDCw8ILOnGPwT0VydIEHNdtmoUIfw
 xlZLxHzny1MslZ78d7uR/cUnV9ylKRRajWzfw1HT8hL51fCt8nRWY0sCvwvl+kMJ
 LsK+6I7mHDUuzA7QBmBI+dhzQgos5+JkkrnpmqHAqwmIh+AI3ksmjUCQ4dM7owrO
 IvEx+ZNDqxAdLcm1WAxATNfxddFXHc62JTvKuuKqTVWuaxVfK1Aqt8MjDMIPeAQ=
 =yV5u
 -----END PGP SIGNATURE-----

Merge tag 'v3.14-rc5' into patchwork

Linux 3.14-rc5

* tag 'v3.14-rc5': (1117 commits)
  Linux 3.14-rc5
  drm/vmwgfx: avoid null pointer dereference at failure paths
  drm/vmwgfx: Make sure backing mobs are cleared when allocated. Update driver date.
  drm/vmwgfx: Remove some unused surface formats
  MAINTAINERS: add maintainer entry for Armada DRM driver
  arm64: Fix !CONFIG_SMP kernel build
  arm64: mm: Add double logical invert to pte accessors
  dm cache: fix truncation bug when mapping I/O to >2TB fast device
  perf tools: Fix strict alias issue for find_first_bit
  powerpc/powernv: Fix indirect XSCOM unmangling
  powerpc/powernv: Fix opal_xscom_{read,write} prototype
  powerpc/powernv: Refactor PHB diag-data dump
  powerpc/powernv: Dump PHB diag-data immediately
  powerpc: Increase stack redzone for 64-bit userspace to 512 bytes
  powerpc/ftrace: bugfix for test_24bit_addr
  powerpc/crashdump : Fix page frame number check in copy_oldmem_page
  powerpc/le: Ensure that the 'stop-self' RTAS token is handled correctly
  kvm, vmx: Really fix lazy FPU on nested guest
  perf tools: fix BFD detection on opensuse
  drm/radeon: enable speaker allocation setup on dce3.2
  ...
2014-03-11 06:55:49 -03:00
Qu Wenruo 52483bc26f btrfs: Add ftrace for btrfs_workqueue
Add ftrace for btrfs_workqueue for further workqueue tunning.
This patch needs to applied after the workqueue replace patchset.

Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
2014-03-10 15:17:21 -04:00
Linus Torvalds fe9ea91cde NFS client bugfixes for Linux 3.14
Highlights include:
 
 - Fix another nfs4_sequence corruptor in RELEASE_LOCKOWNER
 - Fix an Oopsable delegation callback race
 - Fix another bad stateid infinite loop
 - Fail the data server I/O is the stateid represents a lost lock
 - Fix an Oopsable sunrpc trace event
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTHJSVAAoJEGcL54qWCgDyVRkP/2t43gjMF6P+Yc7VUW2e5uTv
 rHhPGFLuDVs9oS3WUYegzvThZMs//ovTaYgUSDNpOYztEB6P8bDRm41q/VgUIixY
 zWFoEplDgAZZE7gP2EJuXJv3bEdhJqXuCG2KUysqMsaIGlahrlQdHmqGTz6Y931o
 WROyMWVvnL4IoEtQHVR7DwyqkvSmifPJ8MZZv3Liy82wuw1fCsh8uy8mkYYSbdvN
 OK4JmHqdJ+CbAZ0WmE4Xe3Itqy/aIMBL9Jyrq4Zl1QX0p7ez3Xpy4XwmtlZXn2KP
 bKMfK2vP9RggagIpjUL+dhCqxlsyjlF6EzTnQRe7jXqlJ/vJ9pQF8X294jwRysfp
 80jDqsTSND4JQiZuBISID23N1nL0TzrP2tWqipR9zx5JJMRVzYZWTzEq4w2uAHgg
 aW2vTdRNRLZWydlfFNQ8FiuEPIFoQaJFmOCQisec2LtfffLZZBz7JPofjNH9CgU8
 mcbPhv75m2imXDOylydiVoD4x/myCGheYw2hpqhb1ZeuQxdN9lnwa0JzjPiP1h38
 XIYwzM7TE8WayrdkMDCeIem1dz/VexknfKmXmFXlMfn3GRKxowCSrggxKG92k0eP
 L35cJj91a9AoxMz/ej0erv0iI1flLeoYP9aJzIRtZf+SB1BZkKhmWlFRQKqnlIOA
 BzjYui4mUoEQEa5Sk7Th
 =JfQx
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-3.14-5' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client bugfixes from Trond Myklebust:
 "Highlights include:

   - Fix another nfs4_sequence corruptor in RELEASE_LOCKOWNER
   - Fix an Oopsable delegation callback race
   - Fix another bad stateid infinite loop
   - Fail the data server I/O is the stateid represents a lost lock
   - Fix an Oopsable sunrpc trace event"

* tag 'nfs-for-3.14-5' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  SUNRPC: Fix oops when trace sunrpc_task events in nfs client
  NFSv4: Fail the truncate() if the lock/open stateid is invalid
  NFSv4.1 Fail data server I/O if stateid represents a lost lock
  NFSv4: Fix the return value of nfs4_select_rw_stateid
  NFSv4: nfs4_stateid_is_current should return 'true' for an invalid stateid
  NFS: Fix a delegation callback race
  NFSv4: Fix another nfs4_sequence corruptor
2014-03-09 19:17:39 -07:00
Ditang Chen 2ca310fc41 SUNRPC: Fix oops when trace sunrpc_task events in nfs client
When tracking sunrpc_task events in nfs client, the clnt pointer may be NULL.

[  139.269266] BUG: unable to handle kernel NULL pointer dereference at 0000000000000004
[  139.269915] IP: [<ffffffffa026f216>] ftrace_raw_event_rpc_task_running+0x86/0xf0 [sunrpc]
[  139.269915] PGD 1d293067 PUD 1d294067 PMD 0
[  139.269915] Oops: 0000 [#1] SMP
[  139.269915] Modules linked in: nfsv4 dns_resolver nfs lockd sunrpc fscache sg ppdev e1000
serio_raw pcspkr parport_pc parport i2c_piix4 i2c_core microcode xfs libcrc32c sd_mod sr_mod
cdrom ata_generic crc_t10dif crct10dif_common pata_acpi ahci libahci ata_piix libata dm_mirror
dm_region_hash dm_log dm_mod
[  139.269915] CPU: 0 PID: 59 Comm: kworker/0:2 Not tainted 3.10.0-84.el7.x86_64 #1
[  139.269915] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[  139.269915] Workqueue: rpciod rpc_async_schedule [sunrpc]
[  139.269915] task: ffff88001b598000 ti: ffff88001b632000 task.ti: ffff88001b632000
[  139.269915] RIP: 0010:[<ffffffffa026f216>]  [<ffffffffa026f216>] ftrace_raw_event_rpc_task_running+0x86/0xf0 [sunrpc]
[  139.269915] RSP: 0018:ffff88001b633d70  EFLAGS: 00010206
[  139.269915] RAX: ffff88001dfc5338 RBX: ffff88001cc37a00 RCX: ffff88001dfc5334
[  139.269915] RDX: ffff88001dfc5338 RSI: 0000000000000000 RDI: ffff88001dfc533c
[  139.269915] RBP: ffff88001b633db0 R08: 000000000000002c R09: 000000000000000a
[  139.269915] R10: 0000000000062180 R11: 00000020759fb9dc R12: ffffffffa0292c20
[  139.269915] R13: ffff88001dfc5334 R14: 0000000000000000 R15: 0000000000000000
[  139.269915] FS:  0000000000000000(0000) GS:ffff88001fc00000(0000) knlGS:0000000000000000
[  139.269915] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  139.269915] CR2: 0000000000000004 CR3: 000000001d290000 CR4: 00000000000006f0
[  139.269915] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  139.269915] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  139.269915] Stack:
[  139.269915]  000000001b633d98 0000000000000246 ffff88001df1dc00 ffff88001cc37a00
[  139.269915]  ffff88001bc35e60 0000000000000000 ffff88001ffa0a48 ffff88001bc35ee0
[  139.269915]  ffff88001b633e08 ffffffffa02704b5 0000000000010000 ffff88001cc37a70
[  139.269915] Call Trace:
[  139.269915]  [<ffffffffa02704b5>] __rpc_execute+0x1d5/0x400 [sunrpc]
[  139.269915]  [<ffffffffa0270706>] rpc_async_schedule+0x26/0x30 [sunrpc]
[  139.269915]  [<ffffffff8107867b>] process_one_work+0x17b/0x460
[  139.269915]  [<ffffffff8107942b>] worker_thread+0x11b/0x400
[  139.269915]  [<ffffffff81079310>] ? rescuer_thread+0x3e0/0x3e0
[  139.269915]  [<ffffffff8107fc80>] kthread+0xc0/0xd0
[  139.269915]  [<ffffffff8107fbc0>] ? kthread_create_on_node+0x110/0x110
[  139.269915]  [<ffffffff815d122c>] ret_from_fork+0x7c/0xb0
[  139.269915]  [<ffffffff8107fbc0>] ? kthread_create_on_node+0x110/0x110
[  139.269915] Code: 4c 8b 45 c8 48 8d 7d d0 89 4d c4 41 89 c9 b9 28 00 00 00 e8 9d b4 e9
e0 48 85 c0 49 89 c5 74 a2 48 89 c7 e8 9d 3f e9 e0 48 89 c2 <41> 8b 46 04 48 8b 7d d0 4c
89 e9 4c 89 e6 89 42 0c 0f b7 83 d4
[  139.269915] RIP  [<ffffffffa026f216>] ftrace_raw_event_rpc_task_running+0x86/0xf0 [sunrpc]
[  139.269915]  RSP <ffff88001b633d70>
[  139.269915] CR2: 0000000000000004
[  140.946406] ---[ end trace ba486328b98d7622 ]---

Signed-off-by: Ditang Chen <chendt.fnst@cn.fujitsu.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-03-07 19:10:08 -05:00
Filipe Brandenburger 114e7b52de tracing: Evaluate len expression only once in __dynamic_array macro
Use a temporary variable to store the expansion of the len expression.
If the evaluation is expensive, this commit will ensure it is evaluated
only once inside ftrace_get_offsets_<call>.

Link: http://lkml.kernel.org/r/1393651938-16418-3-git-send-email-filbranden@google.com

Signed-off-by: Filipe Brandenburger <filbranden@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-03-07 10:06:11 -05:00
Filipe Brandenburger 5859fa1a14 tracing: Correctly expand len expressions from __dynamic_array macro
This fixes expansion of the len argument in __dynamic_array macros.
The previous code from commit 7d536cb3f would not fully evaluate the
expression before multiplying its result by the size of the type.

This went unnoticed because the length stored in the high 16 bits of the
offset (which is the one that was broken here) is only used by
filter_pred_strloc which only acts on strings for which the size of the
type is 1.

Link: http://lkml.kernel.org/r/1393651938-16418-2-git-send-email-filbranden@google.com

Signed-off-by: Filipe Brandenburger <filbranden@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-03-07 10:06:10 -05:00
Steven Rostedt (Red Hat) 8643e92b52 tracing: Fix event header migrate.h to include tracepoint.h
The trace event headers are required to include tracepoint.h. The only reason
they worked now is because module.h included tracepoint.h, and that will soon
change.

Link: http://lkml.kernel.org/r/20140226190644.591040764@goodmis.org

Fixes: 7b2a2d4a18 "mm: migrate: Add a tracepoint for migrate_pages"
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-03-07 10:06:09 -05:00
Steven Rostedt (Red Hat) f479447ad9 tracing: Fix event header writeback.h to include tracepoint.h
The trace event headers are required to include tracepoint.h. The only reason
they worked now is because module.h included tracepoint.h, and that will soon
change.

Link: http://lkml.kernel.org/r/20140226190644.442886305@goodmis.org

Fixes: 455b286468 "writeback: Initial tracing support"
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-03-07 10:06:08 -05:00
Steven Rostedt 3fd40d1ee6 tracing: Use helper functions in event assignment to shrink macro size
The functions that assign the contents for the ftrace events are
defined by the TRACE_EVENT() macros. Each event has its own unique
way to assign data to its buffer. When you have over 500 events,
that means there's 500 functions assigning data uniquely for each
event (not really that many, as DECLARE_EVENT_CLASS() and multiple
DEFINE_EVENT()s will only need a single function).

By making helper functions in the core kernel to do some of the work
instead, we can shrink the size of the kernel down a bit.

With a kernel configured with 502 events, the change in size was:

   text    data     bss     dec     hex filename
12987390        1913504 9785344 24686238        178ae9e /tmp/vmlinux
12959102        1913504 9785344 24657950        178401e /tmp/vmlinux.patched

That's a total of 28288 bytes, which comes down to 56 bytes per event.

Link: http://lkml.kernel.org/r/20120810034708.370808175@goodmis.org

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-03-07 10:06:07 -05:00
Steven Rostedt 35bb4399bd tracing: Move event storage for array from macro to standalone function
The code that shows array fields for events is defined for all events.
This can add up quite a bit when you have over 500 events.

By making helper functions in the core kernel to do the work
instead, we can shrink the size of the kernel down a bit.

With a kernel configured with 502 events, the change in size was:

   text    data     bss     dec     hex filename
12990946        1913568 9785344 24689858        178bcc2 /tmp/vmlinux
12987390        1913504 9785344 24686238        178ae9e /tmp/vmlinux.patched

That's a total of 3556 bytes, which comes down to 7 bytes per event.
Although it's not much, this code is just called at initialization of
the events.

Link: http://lkml.kernel.org/r/20120810034708.084036335@goodmis.org

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-03-07 10:06:06 -05:00
Steven Rostedt 1d6bae966e tracing: Move raw output code from macro to standalone function
The code for trace events to format the raw recorded event data
into human readable format in the 'trace' file is repeated for every
event in the system. When you have over 500 events, this can add up
quite a bit.

By making helper functions in the core kernel to do the work
instead, we can shrink the size of the kernel down a bit.

With a kernel configured with 502 events, the change in size was:

   text    data     bss     dec     hex filename
12991007        1913568 9785344 24689919        178bcff /tmp/vmlinux.orig
12990946        1913568 9785344 24689858        178bcc2 /tmp/vmlinux.patched

Note, this version does not save as much as the version of this patch
I had a few years ago. That is because in the mean time, commit
f71130de5c ("tracing: Add a helper function for event print functions")
did a lot of the work my original patch did. But this change helps
slightly, and is part of a larger clean up to reduce the size much further.

Link: http://lkml.kernel.org/r/20120810034707.378538034@goodmis.org

Cc: Li Zefan <lizefan@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-03-07 10:06:05 -05:00
Roman Pen af5040da01 blktrace: fix accounting of partially completed requests
trace_block_rq_complete does not take into account that request can
be partially completed, so we can get the following incorrect output
of blkparser:

  C   R 232 + 240 [0]
  C   R 240 + 232 [0]
  C   R 248 + 224 [0]
  C   R 256 + 216 [0]

but should be:

  C   R 232 + 8 [0]
  C   R 240 + 8 [0]
  C   R 248 + 8 [0]
  C   R 256 + 8 [0]

Also, the whole output summary statistics of completed requests and
final throughput will be incorrect.

This patch takes into account real completion size of the request and
fixes wrong completion accounting.

Signed-off-by: Roman Pen <r.peniaev@gmail.com>
CC: Steven Rostedt <rostedt@goodmis.org>
CC: Frederic Weisbecker <fweisbec@gmail.com>
CC: Ingo Molnar <mingo@redhat.com>
CC: linux-kernel@vger.kernel.org
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-03-05 16:11:21 -07:00
Antti Palosaari 6f3073b8dc [media] v4l: add stream format for SDR receiver
Add new V4L2 stream format definition, V4L2_BUF_TYPE_SDR_CAPTURE,
for SDR receiver.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-05 14:15:12 -03:00
Namjae Jeon 9eb79482a9 ext4: Add support FALLOC_FL_COLLAPSE_RANGE for fallocate
This patch implements fallocate's FALLOC_FL_COLLAPSE_RANGE for Ext4.
 
The semantics of this flag are following:
1) It collapses the range lying between offset and length by removing any data
   blocks which are present in this range and than updates all the logical
   offsets of extents beyond "offset + len" to nullify the hole created by
   removing blocks. In short, it does not leave a hole.
2) It should be used exclusively. No other fallocate flag in combination.
3) Offset and length supplied to fallocate should be fs block size aligned
   in case of xfs and ext4.
4) Collaspe range does not work beyond i_size.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Tested-by: Dongsu Park <dongsu.park@profitbricks.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-02-23 15:18:59 -05:00
Lukas Czerner a633f5a319 ext4: translate fallocate mode bits to strings
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2014-02-22 06:18:17 -05:00
Jan Kara 0dc83bd30b Revert "writeback: do not sync data dirtied after sync start"
This reverts commit c4a391b53a. Dave
Chinner <david@fromorbit.com> has reported the commit may cause some
inodes to be left out from sync(2). This is because we can call
redirty_tail() for some inode (which sets i_dirtied_when to current time)
after sync(2) has started or similarly requeue_inode() can set
i_dirtied_when to current time if writeback had to skip some pages. The
real problem is in the functions clobbering i_dirtied_when but fixing
that isn't trivial so revert is a safer choice for now.

CC: stable@vger.kernel.org # >= 3.13
Signed-off-by: Jan Kara <jack@suse.cz>
2014-02-22 02:02:28 +01:00
Dirk Brandewie 709c078e17 intel_pstate: Remove energy reporting from pstate_sample tracepoint
Remove the reporting of energy since it does not provide any useful
information about the state of the driver and will be a maintainance
headache going forward since the RAPL energy units register is not
architectural and subject to change between micro-architectures

References: https://bugzilla.kernel.org/show_bug.cgi?id=69831
Fixes: b69880f9cc (intel_pstate: Add trace point to report internal state.)
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-13 02:11:18 +01:00
Rafael J. Wysocki b02f6695f7 PM / QoS: Rename device resume latency QoS items
Rename symbols, variables, functions and structure fields related do
the resume latency device PM QoS type so that it is clear where they
belong (in particular, to avoid confusion with the latency tolerance
device PM QoS type introduced by a subsequent changeset).

Update the PM QoS documentation to better reflect its current state.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-02-11 00:35:23 +01:00
Linus Torvalds b399c46ea0 Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
 - a new jpeg codec driver for Samsung Exynos (jpeg-hw-exynos4)
 - a new dvb frontend for ds2103 chipset (m88ds2103)
 - a new sensor driver for Samsung S5K5BAF UXGA (s5k5baf)
 - new drivers for R-Car VSP1
 - a new radio driver: radio-raremono
 - a new tuner driver for ts2022 chipset (m88ts2022)
 - the analog part of em28xx is now a separate module that only
   load/runs if the device is not a pure digital TV device
 - added a staging driver for bcm2048 radio devices
 - the omap 2 video driver (omap24xx) was moved to staging.  This driver
   is for an old hardware and uses a deprecated Kernel internal API.  If
   nobody cares enough to fix it, it would be removed on a couple Kernel
   releases
 - the sn9c102 driver was moved to staging.  This driver was replaced by
   gspca, and disabled on some distros, as almost all devices are known
   to work properly with gspca.  It should be removed from kernel on a
   couple Kernel releases
 - lots of driver fixes, improvements and cleanups

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (421 commits)
  [media] media: v4l2-dev: fix video device index assignment
  [media] rc-core: reuse device numbers
  [media] em28xx-cards: properly initialize the device bitmap
  [media] Staging: media: Fix line length exceeding 80 characters in as102_drv.c
  [media] Staging: media: Fix line length exceeding 80 characters in as102_fe.c
  [media] Staging: media: Fix quoted string split across line in as102_fe.c
  [media] media: st-rc: Add reset support
  [media] m2m-deinterlace: fix allocated struct type
  [media] radio-usb-si4713: fix sparse non static symbol warnings
  [media] em28xx-audio: remove needless check before usb_free_coherent()
  [media] au0828: Fix sparse non static symbol warning
  Revert "[media] go7007-usb: only use go->dev after allocated"
  [media] em28xx-audio: provide an error code when URB submit fails
  [media] em28xx: fix check for audio only usb interfaces when changing the usb alternate setting
  [media] em28xx: fix usb alternate setting for analog and digital video endpoints > 0
  [media] em28xx: make 'em28xx_ctrl_ops' static
  em28xx-alsa: Fix error patch for init/fini
  [media] em28xx-audio: flush work at .fini
  [media] drxk: remove the option to load firmware asynchronously
  [media] em28xx: adjust period size at runtime
  ...
2014-01-31 09:31:14 -08:00
Linus Torvalds e7651b819e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs updates from Chris Mason:
 "This is a pretty big pull, and most of these changes have been
  floating in btrfs-next for a long time.  Filipe's properties work is a
  cool building block for inheriting attributes like compression down on
  a per inode basis.

  Jeff Mahoney kicked in code to export filesystem info into sysfs.

  Otherwise, lots of performance improvements, cleanups and bug fixes.

  Looks like there are still a few other small pending incrementals, but
  I wanted to get the bulk of this in first"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (149 commits)
  Btrfs: fix spin_unlock in check_ref_cleanup
  Btrfs: setup inode location during btrfs_init_inode_locked
  Btrfs: don't use ram_bytes for uncompressed inline items
  Btrfs: fix btrfs_search_slot_for_read backwards iteration
  Btrfs: do not export ulist functions
  Btrfs: rework ulist with list+rb_tree
  Btrfs: fix memory leaks on walking backrefs failure
  Btrfs: fix send file hole detection leading to data corruption
  Btrfs: add a reschedule point in btrfs_find_all_roots()
  Btrfs: make send's file extent item search more efficient
  Btrfs: fix to catch all errors when resolving indirect ref
  Btrfs: fix protection between walking backrefs and root deletion
  btrfs: fix warning while merging two adjacent extents
  Btrfs: fix infinite path build loops in incremental send
  btrfs: undo sysfs when open_ctree() fails
  Btrfs: fix snprintf usage by send's gen_unique_name
  btrfs: fix defrag 32-bit integer overflow
  btrfs: sysfs: list the NO_HOLES feature
  btrfs: sysfs: don't show reserved incompat feature
  btrfs: call permission checks earlier in ioctls and return EPERM
  ...
2014-01-30 20:08:20 -08:00
Linus Torvalds 53d8ab29f8 Merge branch 'for-3.14/drivers' of git://git.kernel.dk/linux-block
Pull block IO driver changes from Jens Axboe:

 - bcache update from Kent Overstreet.

 - two bcache fixes from Nicholas Swenson.

 - cciss pci init error fix from Andrew.

 - underflow fix in the parallel IDE pg_write code from Dan Carpenter.
   I'm sure the 1 (or 0) users of that are now happy.

 - two PCI related fixes for sx8 from Jingoo Han.

 - floppy init fix for first block read from Jiri Kosina.

 - pktcdvd error return miss fix from Julia Lawall.

 - removal of IRQF_SHARED from the SEGA Dreamcast CD-ROM code from
   Michael Opdenacker.

 - comment typo fix for the loop driver from Olaf Hering.

 - potential oops fix for null_blk from Raghavendra K T.

 - two fixes from Sam Bradshaw (Micron) for the mtip32xx driver, fixing
   an OOM problem and a problem with handling security locked conditions

* 'for-3.14/drivers' of git://git.kernel.dk/linux-block: (47 commits)
  mg_disk: Spelling s/finised/finished/
  null_blk: Null pointer deference problem in alloc_page_buffers
  mtip32xx: Correctly handle security locked condition
  mtip32xx: Make SGL container per-command to eliminate high order dma allocation
  drivers/block/loop.c: fix comment typo in loop_config_discard
  drivers/block/cciss.c:cciss_init_one(): use proper errnos
  drivers/block/paride/pg.c: underflow bug in pg_write()
  drivers/block/sx8.c: remove unnecessary pci_set_drvdata()
  drivers/block/sx8.c: use module_pci_driver()
  floppy: bail out in open() if drive is not responding to block0 read
  bcache: Fix auxiliary search trees for key size > cacheline size
  bcache: Don't return -EINTR when insert finished
  bcache: Improve bucket_prio() calculation
  bcache: Add bch_bkey_equal_header()
  bcache: update bch_bkey_try_merge
  bcache: Move insert_fixup() to btree_keys_ops
  bcache: Convert sorting to btree_keys
  bcache: Convert debug code to btree_keys
  bcache: Convert btree_iter to struct btree_keys
  bcache: Refactor bset_tree sysfs stats
  ...
2014-01-30 11:40:10 -08:00
Linus Torvalds f568849eda Merge branch 'for-3.14/core' of git://git.kernel.dk/linux-block
Pull core block IO changes from Jens Axboe:
 "The major piece in here is the immutable bio_ve series from Kent, the
  rest is fairly minor.  It was supposed to go in last round, but
  various issues pushed it to this release instead.  The pull request
  contains:

   - Various smaller blk-mq fixes from different folks.  Nothing major
     here, just minor fixes and cleanups.

   - Fix for a memory leak in the error path in the block ioctl code
     from Christian Engelmayer.

   - Header export fix from CaiZhiyong.

   - Finally the immutable biovec changes from Kent Overstreet.  This
     enables some nice future work on making arbitrarily sized bios
     possible, and splitting more efficient.  Related fixes to immutable
     bio_vecs:

        - dm-cache immutable fixup from Mike Snitzer.
        - btrfs immutable fixup from Muthu Kumar.

  - bio-integrity fix from Nic Bellinger, which is also going to stable"

* 'for-3.14/core' of git://git.kernel.dk/linux-block: (44 commits)
  xtensa: fixup simdisk driver to work with immutable bio_vecs
  block/blk-mq-cpu.c: use hotcpu_notifier()
  blk-mq: for_each_* macro correctness
  block: Fix memory leak in rw_copy_check_uvector() handling
  bio-integrity: Fix bio_integrity_verify segment start bug
  block: remove unrelated header files and export symbol
  blk-mq: uses page->list incorrectly
  blk-mq: use __smp_call_function_single directly
  btrfs: fix missing increment of bi_remaining
  Revert "block: Warn and free bio if bi_end_io is not set"
  block: Warn and free bio if bi_end_io is not set
  blk-mq: fix initializing request's start time
  block: blk-mq: don't export blk_mq_free_queue()
  block: blk-mq: make blk_sync_queue support mq
  block: blk-mq: support draining mq queue
  dm cache: increment bi_remaining when bi_end_io is restored
  block: fixup for generic bio chaining
  block: Really silence spurious compiler warnings
  block: Silence spurious compiler warnings
  block: Kill bio_pair_split()
  ...
2014-01-30 11:19:05 -08:00
Liu Bo 792ddef040 Btrfs/tracepoint: update new flags for ordered extent TP
Flag BTRFS_ORDERED_TRUNCATED is a new one, update the tracepoint to
support it.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-01-28 13:19:38 -08:00
Liu Bo 9d04a8ceac Btrfs/tracepoint: fix to report right flags for ordered extent
We use set_bit() to assign ordered extent's flags, but in the related
tracepoint we don't do the same thing, which makes the trace output
not to parse flags correctly.

Also, since the flags are bits stuff, we change to use __print_flags with
a 'delim' instead of __print_symbolic.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-01-28 13:19:38 -08:00
Linus Torvalds 2b2b15c32a NFS client updates for Linux 3.14
Highlights include:
 
 - Stable fix for an infinite loop in RPC state machine
 - Stable fix for a use after free situation in the NFSv4 trunking discovery
 - Stable fix for error handling in the NFSv4 trunking discovery
 - Stable fix for the page write update code
 - Stable fix for the NFSv4.1 mount time security negotiation
 - Stable fix for the NFSv4 open code.
 - O_DIRECT locking fixes
 - fix an Oops in the pnfs file commit code
 - RPC layer needs finer grained handling of connection errors
 - More RPC GSS upcall fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJS5ozQAAoJEGcL54qWCgDy8EIQAMKYX1E5qOal3oJCzWdHAPNz
 ZSQ7CbA3c66vgJwpxy5Mz4gEtTK1IEzfTX31gLgkCXkyw54As+0lOa/SvoXFUusN
 BdBtskkIcVjhcly56xP2dzWGMsVrS8Vt+nwhsPv1Qaor5El0zXwPv8YE5PuuxJK5
 fyQdFEsywnCHtmFdyBdzsV8qHvAA0rxZTMmd6ZDBPCi9362D+pfp/1ESVOA6O14N
 rMBAbadF0pVM1UNvcvxSQaeqwCNqg5OuYKgyy9rhlH0WiQ6ijvKPrLVwg2pKZ2hj
 DCmwEqmKNEpxIFeOvmgFs/uhOEBx2IOF58xTc0+X81q96yTVm80anG1VTNFX577U
 gO8Ts0K/gWTD8ghxz4vh4/llc4yUv8ep8zB3qdSfL8C217UJIwnshkbPct7P1DTh
 8vpWtUeVJPu6rwcxMQXy0NntNZjRo1aqrv+htvFzPAMicM2KEAp73eOjStefvtr5
 JkdbvhhOR6dLwPrUEXM5FW5ewURegLjLcEqw3tq8kMnH0nEYjWOMBaB+uT0QFXun
 EXNqCpQHmHisem/3lGU+iVPc9lPf3C6tPIgjvoSplKcah1l3phVx6a5ReL22Zx2n
 qB2ePHfqToMjMcWiW3O3sbRpaDb+Br7xI4l8F3oeicvfv7SKB8k1u/w2IIoXKFIa
 FIdD6R0UIPgdnH5c03EC
 =abfY
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-3.14-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

   - stable fix for an infinite loop in RPC state machine
   - stable fix for a use after free situation in the NFSv4 trunking discovery
   - stable fix for error handling in the NFSv4 trunking discovery
   - stable fix for the page write update code
   - stable fix for the NFSv4.1 mount time security negotiation
   - stable fix for the NFSv4 open code.
   - O_DIRECT locking fixes
   - fix an Oops in the pnfs file commit code
   - RPC layer needs finer grained handling of connection errors
   - more RPC GSS upcall fixes"

* tag 'nfs-for-3.14-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (30 commits)
  pnfs: Proper delay for NFS4ERR_RECALLCONFLICT in layout_get_done
  pnfs: fix BUG in filelayout_recover_commit_reqs
  nfs4: fix discover_server_trunking use after free
  NFSv4.1: Handle errors correctly in nfs41_walk_client_list
  nfs: always make sure page is up-to-date before extending a write to cover the entire page
  nfs: page cache invalidation for dio
  nfs: take i_mutex during direct I/O reads
  nfs: merge nfs_direct_write into nfs_file_direct_write
  nfs: merge nfs_direct_read into nfs_file_direct_read
  nfs: increment i_dio_count for reads, too
  nfs: defer inode_dio_done call until size update is done
  nfs: fix size updates for aio writes
  nfs4.1: properly handle ENOTSUP in SECINFO_NO_NAME
  NFSv4.1: Fix a race in nfs4_write_inode
  NFSv4.1: Don't trust attributes if a pNFS LAYOUTCOMMIT is outstanding
  point to the right include file in a comment (left over from a9004abc3)
  NFS: dprintk() should not print negative fileids and inode numbers
  nfs: fix dead code of ipv6_addr_scope
  sunrpc: Fix infinite loop in RPC state machine
  SUNRPC: Add tracepoint for socket errors
  ...
2014-01-28 08:46:44 -08:00
Linus Torvalds 4ba9920e5e Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) BPF debugger and asm tool by Daniel Borkmann.

 2) Speed up create/bind in AF_PACKET, also from Daniel Borkmann.

 3) Correct reciprocal_divide and update users, from Hannes Frederic
    Sowa and Daniel Borkmann.

 4) Currently we only have a "set" operation for the hw timestamp socket
    ioctl, add a "get" operation to match.  From Ben Hutchings.

 5) Add better trace events for debugging driver datapath problems, also
    from Ben Hutchings.

 6) Implement auto corking in TCP, from Eric Dumazet.  Basically, if we
    have a small send and a previous packet is already in the qdisc or
    device queue, defer until TX completion or we get more data.

 7) Allow userspace to manage ipv6 temporary addresses, from Jiri Pirko.

 8) Add a qdisc bypass option for AF_PACKET sockets, from Daniel
    Borkmann.

 9) Share IP header compression code between Bluetooth and IEEE802154
    layers, from Jukka Rissanen.

10) Fix ipv6 router reachability probing, from Jiri Benc.

11) Allow packets to be captured on macvtap devices, from Vlad Yasevich.

12) Support tunneling in GRO layer, from Jerry Chu.

13) Allow bonding to be configured fully using netlink, from Scott
    Feldman.

14) Allow AF_PACKET users to obtain the VLAN TPID, just like they can
    already get the TCI.  From Atzm Watanabe.

15) New "Heavy Hitter" qdisc, from Terry Lam.

16) Significantly improve the IPSEC support in pktgen, from Fan Du.

17) Allow ipv4 tunnels to cache routes, just like sockets.  From Tom
    Herbert.

18) Add Proportional Integral Enhanced packet scheduler, from Vijay
    Subramanian.

19) Allow openvswitch to mmap'd netlink, from Thomas Graf.

20) Key TCP metrics blobs also by source address, not just destination
    address.  From Christoph Paasch.

21) Support 10G in generic phylib.  From Andy Fleming.

22) Try to short-circuit GRO flow compares using device provided RX
    hash, if provided.  From Tom Herbert.

The wireless and netfilter folks have been busy little bees too.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2064 commits)
  net/cxgb4: Fix referencing freed adapter
  ipv6: reallocate addrconf router for ipv6 address when lo device up
  fib_frontend: fix possible NULL pointer dereference
  rtnetlink: remove IFLA_BOND_SLAVE definition
  rtnetlink: remove check for fill_slave_info in rtnl_have_link_slave_info
  qlcnic: update version to 5.3.55
  qlcnic: Enhance logic to calculate msix vectors.
  qlcnic: Refactor interrupt coalescing code for all adapters.
  qlcnic: Update poll controller code path
  qlcnic: Interrupt code cleanup
  qlcnic: Enhance Tx timeout debugging.
  qlcnic: Use bool for rx_mac_learn.
  bonding: fix u64 division
  rtnetlink: add missing IFLA_BOND_AD_INFO_UNSPEC
  sfc: Use the correct maximum TX DMA ring size for SFC9100
  Add Shradha Shah as the sfc driver maintainer.
  net/vxlan: Share RX skb de-marking and checksum checks with ovs
  tulip: cleanup by using ARRAY_SIZE()
  ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called
  net/cxgb4: Don't retrieve stats during recovery
  ...
2014-01-25 11:17:34 -08:00
Linus Torvalds 09da8dfa98 ACPI and power management updates for 3.14-rc1
- ACPI core changes to make it create a struct acpi_device object for every
    device represented in the ACPI tables during all namespace scans regardless
    of the current status of that device.  In accordance with this, ACPI hotplug
    operations will not delete those objects, unless the underlying ACPI tables
    go away.
 
  - On top of the above, new sysfs attribute for ACPI device objects allowing
    user space to check device status by triggering the execution of _STA for
    its ACPI object.  From Srinivas Pandruvada.
 
  - ACPI core hotplug changes reducing code duplication, integrating the
    PCI root hotplug with the core and reworking container hotplug.
 
  - ACPI core simplifications making it use ACPI_COMPANION() in the code
    "glueing" ACPI device objects to "physical" devices.
 
  - ACPICA update to upstream version 20131218.  This adds support for the
    DBG2 and PCCT tables to ACPICA, fixes some bugs and improves debug
    facilities.  From Bob Moore, Lv Zheng and Betty Dall.
 
  - Init code change to carry out the early ACPI initialization earlier.
    That should allow us to use ACPI during the timekeeping initialization
    and possibly to simplify the EFI initialization too.  From Chun-Yi Lee.
 
  - Clenups of the inclusions of ACPI headers in many places all over from
    Lv Zheng and Rashika Kheria (work in progress).
 
  - New helper for ACPI _DSM execution and rework of the code in drivers
    that uses _DSM to execute it via the new helper.  From Jiang Liu.
 
  - New Win8 OSI blacklist entries from Takashi Iwai.
 
  - Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun Guo,
    Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava, Rashika Kheria,
    Tang Chen, Zhang Rui.
 
  - intel_pstate driver updates, including proper Baytrail support, from
    Dirk Brandewie and intel_pstate documentation from Ramkumar Ramachandra.
 
  - Generic CPU boost ("turbo") support for cpufreq from Lukasz Majewski.
 
  - powernow-k6 cpufreq driver fixes from Mikulas Patocka.
 
  - cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark Brown.
 
  - Assorted cpufreq drivers fixes and cleanups from Anson Huang, John Tobias,
    Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh Kumar.
 
  - cpuidle cleanups from Bartlomiej Zolnierkiewicz.
 
  - Support for hibernation APM events from Bin Shi.
 
  - Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC disabled
    during thaw transitions from Bjørn Mork.
 
  - PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf Hansson.
 
  - PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente Kurusa,
    Rashika Kheria.
 
  - New tool for profiling system suspend from Todd E Brandt and a cpupower
    tool cleanup from One Thousand Gnomes.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJS3a1eAAoJEILEb/54YlRxnTgP/iGawvgjKWm6Qqp7WSIvd5gQ
 zZ6q75C6Pc/W2fq1+OzVGnpCF8WYFy+nFDAXOvUHjIXuoxSwFcuW5l4aMckgl/0a
 TXEWe9MJrCHHRfDApfFacCJ44U02bjJAD5vTyL/hKA+IHeinq4WCSojryYC+8jU0
 cBrUIV0aNH8r5JR2WJNAyv/U29rXsDUOu0I4qTqZ4YaZT6AignMjtLXn1e9AH1Pn
 DPZphTIo/HMnb+kgBOjt4snMk+ahVO9eCOxh/hH8ecnWExw9WynXoU5Nsna0tSZs
 ssyHC7BYexD3oYsG8D52cFUpp4FCsJ0nFQNa2kw0LY+0FBNay43LySisKYHZPXEs
 2WpESDv+/t7yhtnrvM+TtA7aBheKm2XMWGFSu/aERLE17jIidOkXKH5Y7ryYLNf/
 uyRKxNS0NcZWZ0G+/wuY02jQYNkfYz3k/nTr8BAUItRBjdporGIRNEnR9gPzgCUC
 uQhjXWMPulqubr8xbyefPWHTEzU2nvbXwTUWGjrBxSy8zkyy5arfqizUj+VG6afT
 NsboANoMHa9b+xdzigSFdA3nbVK6xBjtU6Ywntk9TIpODKF5NgfARx0H+oSH+Zrj
 32bMzgZtHw/lAbYsnQ9OnTY6AEWQYt6NMuVbTiLXrMHhM3nWwfg/XoN4nZqs6jPo
 IYvE6WhQZU6L6fptGHFC
 =dRf6
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael Wysocki:
 "As far as the number of commits goes, the top spot belongs to ACPI
  this time with cpufreq in the second position and a handful of PM
  core, PNP and cpuidle updates.  They are fixes and cleanups mostly, as
  usual, with a couple of new features in the mix.

  The most visible change is probably that we will create struct
  acpi_device objects (visible in sysfs) for all devices represented in
  the ACPI tables regardless of their status and there will be a new
  sysfs attribute under those objects allowing user space to check that
  status via _STA.

  Consequently, ACPI device eject or generally hot-removal will not
  delete those objects, unless the table containing the corresponding
  namespace nodes is unloaded, which is extremely rare.  Also ACPI
  container hotplug will be handled quite a bit differently and cpufreq
  will support CPU boost ("turbo") generically and not only in the
  acpi-cpufreq driver.

  Specifics:

   - ACPI core changes to make it create a struct acpi_device object for
     every device represented in the ACPI tables during all namespace
     scans regardless of the current status of that device.  In
     accordance with this, ACPI hotplug operations will not delete those
     objects, unless the underlying ACPI tables go away.

   - On top of the above, new sysfs attribute for ACPI device objects
     allowing user space to check device status by triggering the
     execution of _STA for its ACPI object.  From Srinivas Pandruvada.

   - ACPI core hotplug changes reducing code duplication, integrating
     the PCI root hotplug with the core and reworking container hotplug.

   - ACPI core simplifications making it use ACPI_COMPANION() in the
     code "glueing" ACPI device objects to "physical" devices.

   - ACPICA update to upstream version 20131218.  This adds support for
     the DBG2 and PCCT tables to ACPICA, fixes some bugs and improves
     debug facilities.  From Bob Moore, Lv Zheng and Betty Dall.

   - Init code change to carry out the early ACPI initialization
     earlier.  That should allow us to use ACPI during the timekeeping
     initialization and possibly to simplify the EFI initialization too.
     From Chun-Yi Lee.

   - Clenups of the inclusions of ACPI headers in many places all over
     from Lv Zheng and Rashika Kheria (work in progress).

   - New helper for ACPI _DSM execution and rework of the code in
     drivers that uses _DSM to execute it via the new helper.  From
     Jiang Liu.

   - New Win8 OSI blacklist entries from Takashi Iwai.

   - Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun
     Guo, Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava,
     Rashika Kheria, Tang Chen, Zhang Rui.

   - intel_pstate driver updates, including proper Baytrail support,
     from Dirk Brandewie and intel_pstate documentation from Ramkumar
     Ramachandra.

   - Generic CPU boost ("turbo") support for cpufreq from Lukasz
     Majewski.

   - powernow-k6 cpufreq driver fixes from Mikulas Patocka.

   - cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark
     Brown.

   - Assorted cpufreq drivers fixes and cleanups from Anson Huang, John
     Tobias, Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh
     Kumar.

   - cpuidle cleanups from Bartlomiej Zolnierkiewicz.

   - Support for hibernation APM events from Bin Shi.

   - Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC
     disabled during thaw transitions from Bjørn Mork.

   - PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf
     Hansson.

   - PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente
     Kurusa, Rashika Kheria.

   - New tool for profiling system suspend from Todd E Brandt and a
     cpupower tool cleanup from One Thousand Gnomes"

* tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (153 commits)
  thermal: exynos: boost: Automatic enable/disable of BOOST feature (at Exynos4412)
  cpufreq: exynos4x12: Change L0 driver data to CPUFREQ_BOOST_FREQ
  Documentation: cpufreq / boost: Update BOOST documentation
  cpufreq: exynos: Extend Exynos cpufreq driver to support boost
  cpufreq / boost: Kconfig: Support for software-managed BOOST
  acpi-cpufreq: Adjust the code to use the common boost attribute
  cpufreq: Add boost frequency support in core
  intel_pstate: Add trace point to report internal state.
  cpufreq: introduce cpufreq_generic_get() routine
  ARM: SA1100: Create dummy clk_get_rate() to avoid build failures
  cpufreq: stats: create sysfs entries when cpufreq_stats is a module
  cpufreq: stats: free table and remove sysfs entry in a single routine
  cpufreq: stats: remove hotplug notifiers
  cpufreq: stats: handle cpufreq_unregister_driver() and suspend/resume properly
  cpufreq: speedstep: remove unused speedstep_get_state
  platform: introduce OF style 'modalias' support for platform bus
  PM / tools: new tool for suspend/resume performance optimization
  ACPI: fix module autoloading for ACPI enumerated devices
  ACPI: add module autoloading support for ACPI enumerated devices
  ACPI: fix create_modalias() return value handling
  ...
2014-01-24 15:51:02 -08:00
Linus Torvalds 0d90d63872 f2fs updates for v3.14
This patch-set includes the following major enhancement patches.
 o support inline_data
 o refactor bio operations such as merge operations and rw type assignment
 o enhance the direct IO path
 o enhance bio operations
 o truncate a node page when it becomes obsolete
 o add sysfs entries: small_discards, max_victim_search, and in-place-update
 o add a sysfs entry to control max_victim_search
 
 The other bug fixes are as follows.
 o fix a bug in truncate_partial_nodes
 o avoid warnings during sparse and build process
 o fix error handling flows
 o fix potential bit overflows
 
 And, there are a bunch of cleanups.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJS4HQfAAoJEEAUqH6CSFDSyyMP/iUXSMC9yw6eOmSjAh3boc6+
 C7e4zrhdovekGTuZgg41SLdr83cpbEohv11wcXAfxB+eYFEz0zrAVzt54zMi7uOL
 9JmFJ6XVL/T3omI5hpEwWHg6S6tOynN6mcjacsrvypEekgjHbbpLudSw6SCu3dKz
 Lpc3z6CxrWbhvX8Iyf1j8mCceWkTO6eRv7u2H4Njtsq4Tukw3BHiBsURXt6kGwpx
 CvRBgCFdQhv4GAtbDosmVjNWOUxvik7w2epHAPQGddFTgaCL9uS+gfweHK6H9EDp
 1e3BDhmn5r9IhiLY8KVXRc8+po9kQeO1jNQATBuWggfjJSGbEBmrEQX4MFE3uCi9
 q84hGV9+yaJxoT2A21qIeWgorF9gjqNbnrrENKHyKhOqXJSrh48u5LUV8KqIyz1Y
 Qw62cypEB+PQxWegN76vwX/OrHMCLYMQ6c78bYLSwkBKonOrF5sN2+kJW5+zEj6n
 q2cYi1PLMJe7LTcULUrxJTSPFLKM5yA2oYZq3LN4sUYBeN6USaouaIqcZBqRBTCO
 adqlTa3sWytkDMAHsTpwrHABKK7pwiZoPLDVwjo0TIJ6Us4JhDtTktp5pj24fQ7Y
 6lC9w4VbfAKtq8fMV17rZYD0lQFlmZk4uQRJ8XYicCRFx11kMPKYzdGmP5aVXWru
 wxcztktnABtCAXK0PFLf
 =gVDh
 -----END PGP SIGNATURE-----

Merge tag 'for-f2fs-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs

Pull f2fs updates from Jaegeuk Kim:
 "In this round, a couple of sysfs entries were introduced to tune the
  f2fs at runtime.

  In addition, f2fs starts to support inline_data and improves the
  read/write performance in some workloads by refactoring bio-related
  flows.

  This patch-set includes the following major enhancement patches.
   - support inline_data
   - refactor bio operations such as merge operations and rw type
     assignment
   - enhance the direct IO path
   - enhance bio operations
   - truncate a node page when it becomes obsolete
   - add sysfs entries: small_discards, max_victim_search, and
     in-place-update
   - add a sysfs entry to control max_victim_search

  The other bug fixes are as follows.
   - fix a bug in truncate_partial_nodes
   - avoid warnings during sparse and build process
   - fix error handling flows
   - fix potential bit overflows

  And, there are a bunch of cleanups"

* tag 'for-f2fs-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (95 commits)
  f2fs: drop obsolete node page when it is truncated
  f2fs: introduce NODE_MAPPING for code consistency
  f2fs: remove the orphan block page array
  f2fs: add help function META_MAPPING
  f2fs: move a branch for code redability
  f2fs: call mark_inode_dirty to flush dirty pages
  f2fs: clean checkpatch warnings
  f2fs: missing REQ_META and REQ_PRIO when sync_meta_pages(META_FLUSH)
  f2fs: avoid f2fs_balance_fs call during pageout
  f2fs: add delimiter to seperate name and value in debug phrase
  f2fs: use spinlock rather than mutex for better speed
  f2fs: move alloc new orphan node out of lock protection region
  f2fs: move grabing orphan pages out of protection region
  f2fs: remove the needless parameter of f2fs_wait_on_page_writeback
  f2fs: update documents and a MAINTAINERS entry
  f2fs: add a sysfs entry to control max_victim_search
  f2fs: improve write performance under frequent fsync calls
  f2fs: avoid to read inline data except first page
  f2fs: avoid to left uninitialized data in page when read inline data
  f2fs: fix truncate_partial_nodes bug
  ...
2014-01-23 09:21:09 -08:00
Linus Torvalds 60eaa0190f This pull request has a new feature to ftrace, namely the trace event
triggers by Tom Zanussi. A trigger is a way to enable an action when an
 event is hit. The actions are:
 
  o  trace on/off - enable or disable tracing
  o  snapshot     - save the current trace buffer in the snapshot
  o  stacktrace   - dump the current stack trace to the ringbuffer
  o  enable/disable events - enable or disable another event
 
 Namhyung Kim added updates to the tracing uprobes code. Having the
 uprobes add support for fetch methods.
 
 The rest are various bug fixes with the new code, and minor ones for
 the old code.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQEcBAABAgAGBQJS3Z9fAAoJEKQekfcNnQGuFf0H/0CteaN+BJjpif6Tnxia15Sp
 pcftzU0lgqfNzsfitmbjiVTgXWqCghoZo8UI9tQZvBZ9wmDIxeXQR73uoBgVlSCQ
 ovyBO/R8r+lq+7EsDCwntZvrLbcdn6s/jzoruRvt7r35ghK5pH81DNR1BOzTQBhW
 x+361Xtc13aok7N7JN8KR96VDUP9f8KU6PWqJ5lgS2Zl+wbVw6b0p8OV8IMCHczP
 MdYrx8y4Jv4QWW7rMShAAVBe9qJQ56JWiWA17ysa4kY8BkKQ7QtlEFr+r1YY0nX5
 67brXiL8u0NFzRx5y2VRpGc25BbImnVBFpoLQ5Itluq9OdZE3aOQubzXlY70R6g=
 =Hkho
 -----END PGP SIGNATURE-----

Merge tag 'trace-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:
 "This pull request has a new feature to ftrace, namely the trace event
  triggers by Tom Zanussi.  A trigger is a way to enable an action when
  an event is hit.  The actions are:

   o  trace on/off - enable or disable tracing
   o  snapshot     - save the current trace buffer in the snapshot
   o  stacktrace   - dump the current stack trace to the ringbuffer
   o  enable/disable events - enable or disable another event

  Namhyung Kim added updates to the tracing uprobes code.  Having the
  uprobes add support for fetch methods.

  The rest are various bug fixes with the new code, and minor ones for
  the old code"

* tag 'trace-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (38 commits)
  tracing: Fix buggered tee(2) on tracing_pipe
  tracing: Have trace buffer point back to trace_array
  ftrace: Fix synchronization location disabling and freeing ftrace_ops
  ftrace: Have function graph only trace based on global_ops filters
  ftrace: Synchronize setting function_trace_op with ftrace_trace_function
  tracing: Show available event triggers when no trigger is set
  tracing: Consolidate event trigger code
  tracing: Fix counter for traceon/off event triggers
  tracing: Remove double-underscore naming in syscall trigger invocations
  tracing/kprobes: Add trace event trigger invocations
  tracing/probes: Fix build break on !CONFIG_KPROBE_EVENT
  tracing/uprobes: Add @+file_offset fetch method
  uprobes: Allocate ->utask before handler_chain() for tracing handlers
  tracing/uprobes: Add support for full argument access methods
  tracing/uprobes: Fetch args before reserving a ring buffer
  tracing/uprobes: Pass 'is_return' to traceprobe_parse_probe_arg()
  tracing/probes: Implement 'memory' fetch method for uprobes
  tracing/probes: Add fetch{,_size} member into deref fetch method
  tracing/probes: Move 'symbol' fetch method to kprobes
  tracing/probes: Implement 'stack' fetch method for uprobes
  ...
2014-01-22 16:35:21 -08:00
Mel Gorman 0eb927c0ab mm: compaction: trace compaction begin and end
The broad goal of the series is to improve allocation success rates for
huge pages through memory compaction, while trying not to increase the
compaction overhead.  The original objective was to reintroduce
capturing of high-order pages freed by the compaction, before they are
split by concurrent activity.  However, several bugs and opportunities
for simple improvements were found in the current implementation, mostly
through extra tracepoints (which are however too ugly for now to be
considered for sending).

The patches mostly deal with two mechanisms that reduce compaction
overhead, which is caching the progress of migrate and free scanners,
and marking pageblocks where isolation failed to be skipped during
further scans.

Patch 1 (from mgorman) adds tracepoints that allow calculate time spent in
        compaction and potentially debug scanner pfn values.

Patch 2 encapsulates the some functionality for handling deferred compactions
        for better maintainability, without a functional change
        type is not determined without being actually needed.

Patch 3 fixes a bug where cached scanner pfn's are sometimes reset only after
        they have been read to initialize a compaction run.

Patch 4 fixes a bug where scanners meeting is sometimes not properly detected
        and can lead to multiple compaction attempts quitting early without
        doing any work.

Patch 5 improves the chances of sync compaction to process pageblocks that
        async compaction has skipped due to being !MIGRATE_MOVABLE.

Patch 6 improves the chances of sync direct compaction to actually do anything
        when called after async compaction fails during allocation slowpath.

The impact of patches were validated using mmtests's stress-highalloc
benchmark with mmtests's stress-highalloc benchmark on a x86_64 machine
with 4GB memory.

Due to instability of the results (mostly related to the bugs fixed by
patches 2 and 3), 10 iterations were performed, taking min,mean,max
values for success rates and mean values for time and vmstat-based
metrics.

First, the default GFP_HIGHUSER_MOVABLE allocations were tested with the
patches stacked on top of v3.13-rc2.  Patch 2 is OK to serve as baseline
due to no functional changes in 1 and 2.  Comments below.

stress-highalloc
                             3.13-rc2              3.13-rc2              3.13-rc2              3.13-rc2              3.13-rc2
                              2-nothp               3-nothp               4-nothp               5-nothp               6-nothp
Success 1 Min          9.00 (  0.00%)       10.00 (-11.11%)       43.00 (-377.78%)       43.00 (-377.78%)       33.00 (-266.67%)
Success 1 Mean        27.50 (  0.00%)       25.30 (  8.00%)       45.50 (-65.45%)       45.90 (-66.91%)       46.30 (-68.36%)
Success 1 Max         36.00 (  0.00%)       36.00 (  0.00%)       47.00 (-30.56%)       48.00 (-33.33%)       52.00 (-44.44%)
Success 2 Min         10.00 (  0.00%)        8.00 ( 20.00%)       46.00 (-360.00%)       45.00 (-350.00%)       35.00 (-250.00%)
Success 2 Mean        26.40 (  0.00%)       23.50 ( 10.98%)       47.30 (-79.17%)       47.60 (-80.30%)       48.10 (-82.20%)
Success 2 Max         34.00 (  0.00%)       33.00 (  2.94%)       48.00 (-41.18%)       50.00 (-47.06%)       54.00 (-58.82%)
Success 3 Min         65.00 (  0.00%)       63.00 (  3.08%)       85.00 (-30.77%)       84.00 (-29.23%)       85.00 (-30.77%)
Success 3 Mean        76.70 (  0.00%)       70.50 (  8.08%)       86.20 (-12.39%)       85.50 (-11.47%)       86.00 (-12.13%)
Success 3 Max         87.00 (  0.00%)       86.00 (  1.15%)       88.00 ( -1.15%)       87.00 (  0.00%)       87.00 (  0.00%)

            3.13-rc2    3.13-rc2    3.13-rc2    3.13-rc2    3.13-rc2
             2-nothp     3-nothp     4-nothp     5-nothp     6-nothp
User         6437.72     6459.76     5960.32     5974.55     6019.67
System       1049.65     1049.09     1029.32     1031.47     1032.31
Elapsed      1856.77     1874.48     1949.97     1994.22     1983.15

                              3.13-rc2    3.13-rc2    3.13-rc2    3.13-rc2    3.13-rc2
                               2-nothp     3-nothp     4-nothp     5-nothp     6-nothp
Minor Faults                 253952267   254581900   250030122   250507333   250157829
Major Faults                       420         407         506         530         530
Swap Ins                             4           9           9           6           6
Swap Outs                          398         375         345         346         333
Direct pages scanned            197538      189017      298574      287019      299063
Kswapd pages scanned           1809843     1801308     1846674     1873184     1861089
Kswapd pages reclaimed         1806972     1798684     1844219     1870509     1858622
Direct pages reclaimed          197227      188829      298380      286822      298835
Kswapd efficiency                  99%         99%         99%         99%         99%
Kswapd velocity                953.382     970.449     952.243     934.569     922.286
Direct efficiency                  99%         99%         99%         99%         99%
Direct velocity                104.058     101.832     153.961     143.200     148.205
Percentage direct scans             9%          9%         13%         13%         13%
Zone normal velocity           347.289     359.676     348.063     339.933     332.983
Zone dma32 velocity            710.151     712.605     758.140     737.835     737.507
Zone dma velocity                0.000       0.000       0.000       0.000       0.000
Page writes by reclaim         557.600     429.000     353.600     426.400     381.800
Page writes file                   159          53           7          79          48
Page writes anon                   398         375         345         346         333
Page reclaim immediate             825         644         411         575         420
Sector Reads                   2781750     2769780     2878547     2939128     2910483
Sector Writes                 12080843    12083351    12012892    12002132    12010745
Page rescued immediate               0           0           0           0           0
Slabs scanned                  1575654     1545344     1778406     1786700     1794073
Direct inode steals               9657       10037       15795       14104       14645
Kswapd inode steals              46857       46335       50543       50716       51796
Kswapd skipped wait                  0           0           0           0           0
THP fault alloc                     97          91          81          71          77
THP collapse alloc                 456         506         546         544         565
THP splits                           6           5           5           4           4
THP fault fallback                   0           1           0           0           0
THP collapse fail                   14          14          12          13          12
Compaction stalls                 1006         980        1537        1536        1548
Compaction success                 303         284         562         559         578
Compaction failures                702         696         974         976         969
Page migrate success           1177325     1070077     3927538     3781870     3877057
Page migrate failure                 0           0           0           0           0
Compaction pages isolated      2547248     2306457     8301218     8008500     8200674
Compaction migrate scanned    42290478    38832618   153961130   154143900   159141197
Compaction free scanned       89199429    79189151   356529027   351943166   356326727
Compaction cost                   1566        1426        5312        5156        5294
NUMA PTE updates                     0           0           0           0           0
NUMA hint faults                     0           0           0           0           0
NUMA hint local faults               0           0           0           0           0
NUMA hint local percent            100         100         100         100         100
NUMA pages migrated                  0           0           0           0           0
AutoNUMA cost                        0           0           0           0           0

Observations:

- The "Success 3" line is allocation success rate with system idle
  (phases 1 and 2 are with background interference).  I used to get stable
  values around 85% with vanilla 3.11.  The lower min and mean values came
  with 3.12.  This was bisected to commit 81c0a2bb ("mm: page_alloc: fair
  zone allocator policy") As explained in comment for patch 3, I don't
  think the commit is wrong, but that it makes the effect of compaction
  bugs worse.  From patch 3 onwards, the results are OK and match the 3.11
  results.

- Patch 4 also clearly helps phases 1 and 2, and exceeds any results
  I've seen with 3.11 (I didn't measure it that thoroughly then, but it
  was never above 40%).

- Compaction cost and number of scanned pages is higher, especially due
  to patch 4.  However, keep in mind that patches 3 and 4 fix existing
  bugs in the current design of compaction overhead mitigation, they do
  not change it.  If overhead is found unacceptable, then it should be
  decreased differently (and consistently, not due to random conditions)
  than the current implementation does.  In contrast, patches 5 and 6
  (which are not strictly bug fixes) do not increase the overhead (but
  also not success rates).  This might be a limitation of the
  stress-highalloc benchmark as it's quite uniform.

Another set of results is when configuring stress-highalloc t allocate
with similar flags as THP uses:
 (GFP_HIGHUSER_MOVABLE|__GFP_NOMEMALLOC|__GFP_NORETRY|__GFP_NO_KSWAPD)

stress-highalloc
                             3.13-rc2              3.13-rc2              3.13-rc2              3.13-rc2              3.13-rc2
                                2-thp                 3-thp                 4-thp                 5-thp                 6-thp
Success 1 Min          2.00 (  0.00%)        7.00 (-250.00%)       18.00 (-800.00%)       19.00 (-850.00%)       26.00 (-1200.00%)
Success 1 Mean        19.20 (  0.00%)       17.80 (  7.29%)       29.20 (-52.08%)       29.90 (-55.73%)       32.80 (-70.83%)
Success 1 Max         27.00 (  0.00%)       29.00 ( -7.41%)       35.00 (-29.63%)       36.00 (-33.33%)       37.00 (-37.04%)
Success 2 Min          3.00 (  0.00%)        8.00 (-166.67%)       21.00 (-600.00%)       21.00 (-600.00%)       32.00 (-966.67%)
Success 2 Mean        19.30 (  0.00%)       17.90 (  7.25%)       32.20 (-66.84%)       32.60 (-68.91%)       35.70 (-84.97%)
Success 2 Max         27.00 (  0.00%)       30.00 (-11.11%)       36.00 (-33.33%)       37.00 (-37.04%)       39.00 (-44.44%)
Success 3 Min         62.00 (  0.00%)       62.00 (  0.00%)       85.00 (-37.10%)       75.00 (-20.97%)       64.00 ( -3.23%)
Success 3 Mean        66.30 (  0.00%)       65.50 (  1.21%)       85.60 (-29.11%)       83.40 (-25.79%)       83.50 (-25.94%)
Success 3 Max         70.00 (  0.00%)       69.00 (  1.43%)       87.00 (-24.29%)       86.00 (-22.86%)       87.00 (-24.29%)

            3.13-rc2    3.13-rc2    3.13-rc2    3.13-rc2    3.13-rc2
               2-thp       3-thp       4-thp       5-thp       6-thp
User         6547.93     6475.85     6265.54     6289.46     6189.96
System       1053.42     1047.28     1043.23     1042.73     1038.73
Elapsed      1835.43     1821.96     1908.67     1912.74     1956.38

                              3.13-rc2    3.13-rc2    3.13-rc2    3.13-rc2    3.13-rc2
                                 2-thp       3-thp       4-thp       5-thp       6-thp
Minor Faults                 256805673   253106328   253222299   249830289   251184418
Major Faults                       395         375         423         434         448
Swap Ins                            12          10          10          12           9
Swap Outs                          530         537         487         455         415
Direct pages scanned             71859       86046      153244      152764      190713
Kswapd pages scanned           1900994     1870240     1898012     1892864     1880520
Kswapd pages reclaimed         1897814     1867428     1894939     1890125     1877924
Direct pages reclaimed           71766       85908      153167      152643      190600
Kswapd efficiency                  99%         99%         99%         99%         99%
Kswapd velocity               1029.000    1067.782    1000.091     991.049     951.218
Direct efficiency                  99%         99%         99%         99%         99%
Direct velocity                 38.897      49.127      80.747      79.983      96.468
Percentage direct scans             3%          4%          7%          7%          9%
Zone normal velocity           351.377     372.494     348.910     341.689     335.310
Zone dma32 velocity            716.520     744.414     731.928     729.343     712.377
Zone dma velocity                0.000       0.000       0.000       0.000       0.000
Page writes by reclaim         669.300     604.000     545.700     538.900     429.900
Page writes file                   138          66          58          83          14
Page writes anon                   530         537         487         455         415
Page reclaim immediate             806         655         772         548         517
Sector Reads                   2711956     2703239     2811602     2818248     2839459
Sector Writes                 12163238    12018662    12038248    11954736    11994892
Page rescued immediate               0           0           0           0           0
Slabs scanned                  1385088     1388364     1507968     1513292     1558656
Direct inode steals               1739        2564        4622        5496        6007
Kswapd inode steals              47461       46406       47804       48013       48466
Kswapd skipped wait                  0           0           0           0           0
THP fault alloc                    110          82          84          69          70
THP collapse alloc                 445         482         467         462         539
THP splits                           6           5           4           5           3
THP fault fallback                   3           0           0           0           0
THP collapse fail                   15          14          14          14          13
Compaction stalls                  659         685        1033        1073        1111
Compaction success                 222         225         410         427         456
Compaction failures                436         460         622         646         655
Page migrate success            446594      439978     1085640     1095062     1131716
Page migrate failure                 0           0           0           0           0
Compaction pages isolated      1029475     1013490     2453074     2482698     2565400
Compaction migrate scanned     9955461    11344259    24375202    27978356    30494204
Compaction free scanned       27715272    28544654    80150615    82898631    85756132
Compaction cost                    552         555        1344        1379        1436
NUMA PTE updates                     0           0           0           0           0
NUMA hint faults                     0           0           0           0           0
NUMA hint local faults               0           0           0           0           0
NUMA hint local percent            100         100         100         100         100
NUMA pages migrated                  0           0           0           0           0
AutoNUMA cost                        0           0           0           0           0

There are some differences from the previous results for THP-like allocations:

- Here, the bad result for unpatched kernel in phase 3 is much more
  consistent to be between 65-70% and not related to the "regression" in
  3.12.  Still there is the improvement from patch 4 onwards, which brings
  it on par with simple GFP_HIGHUSER_MOVABLE allocations.

- Compaction costs have increased, but nowhere near as much as the
  non-THP case.  Again, the patches should be worth the gained
  determininsm.

- Patches 5 and 6 somewhat increase the number of migrate-scanned pages.
   This is most likely due to __GFP_NO_KSWAPD flag, which means the cached
  pfn's and pageblock skip bits are not reset by kswapd that often (at
  least in phase 3 where no concurrent activity would wake up kswapd) and
  the patches thus help the sync-after-async compaction.  It doesn't
  however show that the sync compaction would help so much with success
  rates, which can be again seen as a limitation of the benchmark
  scenario.

This patch (of 6):

Add two tracepoints for compaction begin and end of a zone.  Using this it
is possible to calculate how much time a workload is spending within
compaction and potentially debug problems related to cached pfns for
scanning.  In combination with the direct reclaim and slab trace points it
should be possible to estimate most allocation-related overhead for a
workload.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:48 -08:00
Mel Gorman 286549dcaf sched: add tracepoints related to NUMA task migration
This patch adds three tracepoints
 o trace_sched_move_numa	when a task is moved to a node
 o trace_sched_swap_numa	when a task is swapped with another task
 o trace_sched_stick_numa	when a numa-related migration fails

The tracepoints allow the NUMA scheduler activity to be monitored and the
following high-level metrics can be calculated

 o NUMA migrated stuck	 nr trace_sched_stick_numa
 o NUMA migrated idle	 nr trace_sched_move_numa
 o NUMA migrated swapped nr trace_sched_swap_numa
 o NUMA local swapped	 trace_sched_swap_numa src_nid == dst_nid (should never happen)
 o NUMA remote swapped	 trace_sched_swap_numa src_nid != dst_nid (should == NUMA migrated swapped)
 o NUMA group swapped	 trace_sched_swap_numa src_ngid == dst_ngid
			 Maybe a small number of these are acceptable
			 but a high number would be a major surprise.
			 It would be even worse if bounces are frequent.
 o NUMA avg task migs.	 Average number of migrations for tasks
 o NUMA stddev task mig	 Self-explanatory
 o NUMA max task migs.	 Maximum number of migrations for a single task

In general the intent of the tracepoints is to help diagnose problems
where automatic NUMA balancing appears to be doing an excessive amount
of useless work.

[akpm@linux-foundation.org: remove semicolon-after-if, repair coding-style]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Alex Thorlton <athorlton@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:48 -08:00
Mel Gorman af1839d722 mm: numa: trace tasks that fail migration due to rate limiting
A low local/remote numa hinting fault ratio is potentially explained by
failed migrations.  This patch adds a tracepoint that fires when
migration fails due to migration rate limitation.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Alex Thorlton <athorlton@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21 16:19:48 -08:00
Dirk Brandewie b69880f9cc intel_pstate: Add trace point to report internal state.
Add perf trace event "power:pstate_sample" to report driver state to
aid in diagnosing issues reported against intel_pstate.

Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-17 02:00:44 +01:00
Ben Hutchings ae78dbfa40 net: Add trace events for all receive entry points, exposing more skb fields
The existing net/netif_rx and net/netif_receive_skb trace events
provide little information about the skb, nor do they indicate how it
entered the stack.

Add trace events at entry of each of the exported functions, including
most fields that are likely to be interesting for debugging driver
datapath behaviour.  Split netif_rx() and netif_receive_skb() so that
internal calls are not traced.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14 14:46:02 -08:00
Ben Hutchings d87d04a785 net: Add net_dev_start_xmit trace event, exposing more skb fields
The existing net/net_dev_xmit trace event provides little information
about the skb that has been passed to the driver, and it is not
simple to add more since the skb may already have been freed at
the point the event is emitted.

Add a separate trace event before the skb is passed to the driver,
including most fields that are likely to be interesting for debugging
driver datapath behaviour.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14 14:46:02 -08:00
Steven Rostedt (Red Hat) 13a1e4aef5 tracing: Consolidate event trigger code
The event trigger code that checks for callback triggers before and
after recording of an event has lots of flags checks. This code is
duplicated throughout the ftrace events, kprobes and system calls.
They all do the exact same checks against the event flags.

Added helper functions ftrace_trigger_soft_disabled(),
event_trigger_unlock_commit() and event_trigger_unlock_commit_regs()
that consolidated the code and these are used instead.

Link: http://lkml.kernel.org/r/20140106222703.5e7dbba2@gandalf.local.home

Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-01-09 21:20:07 -05:00
Kent Overstreet a85e968e66 bcache: Add struct btree_keys
Soon, bset.c won't need to depend on struct btree.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-01-08 13:05:13 -08:00
Kent Overstreet 78365411b3 bcache: Rework allocator reserves
We need a reserve for allocating buckets for new btree nodes - and now that
we've got multiple btrees, it really needs to be per btree.

This reworks the reserves so we've got separate freelists for each reserve
instead of watermarks, which seems to make things a bit cleaner, and it adds
some code so that btree_split() can make sure the reserve is available before it
starts.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
2014-01-08 13:05:09 -08:00
Trond Myklebust e8353c7682 SUNRPC: Add tracepoint for socket errors
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2013-12-31 14:02:46 -05:00
Jens Axboe b28bc9b38c Linux 3.13-rc6
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJSwLfoAAoJEHm+PkMAQRiGi6QH/1U1B7lmHChDTw3jj1lfm9gA
 189Si4QJlnxFWCKHvKEL+pcaVuACU+aMGI8+KyMYK4/JfuWVjjj5fr/SvyHH2/8m
 LdSK8aHMhJ46uBS4WJ/l6v46qQa5e2vn8RKSBAyKm/h4vpt+hd6zJdoFrFai4th7
 k/TAwOAEHI5uzexUChwLlUBRTvbq4U8QUvDu+DeifC8cT63CGaaJ4qVzjOZrx1an
 eP6UXZrKDASZs7RU950i7xnFVDQu4PsjlZi25udsbeiKcZJgPqGgXz5ULf8ZH8RQ
 YCi1JOnTJRGGjyIOyLj7pyB01h7XiSM2+eMQ0S7g54F2s7gCJ58c2UwQX45vRWU=
 =/4/R
 -----END PGP SIGNATURE-----

Merge tag 'v3.13-rc6' into for-3.14/core

Needed to bring blk-mq uptodate, since changes have been going in
since for-3.14/core was established.

Fixup merge issues related to the immutable biovec changes.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

Conflicts:
	block/blk-flush.c
	fs/btrfs/check-integrity.c
	fs/btrfs/extent_io.c
	fs/btrfs/scrub.c
	fs/logfs/dev_bdev.c
2013-12-31 09:51:02 -07:00
Jaegeuk Kim 93dfe2ac51 f2fs: refactor bio-related operations
This patch integrates redundant bio operations on read and write IOs.

1. Move bio-related codes to the top of data.c.
2. Replace f2fs_submit_bio with f2fs_submit_merged_bio, which handles read
   bios additionally.
3. Introduce __submit_merged_bio to submit the merged bio.
4. Change f2fs_readpage to f2fs_submit_page_bio.
5. Introduce f2fs_submit_page_mbio to integrate previous submit_read_page and
   submit_write_page.

Reviewed-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com >
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23 10:18:05 +09:00
Jaegeuk Kim a709f4a2f2 f2fs: add detailed information of bio types in the tracepoints
This patch inserts information of bio types in more detail.
So, we can now see REQ_META and REQ_PRIO too.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23 10:18:03 +09:00
Chao Yu d4d288bc72 f2fs: adds a tracepoint for f2fs_submit_read_bio
This patch adds a tracepoint for f2fs_submit_read_bio.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: integrate tracepoints of f2fs_submit_read(_write)_bio]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23 10:18:02 +09:00
Chao Yu 87b8872d5b f2fs: adds a tracepoint for submit_read_page
This patch adds a tracepoint for submit_read_page.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: integrate tracepoints of f2fs_submit_read(_write)_page]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23 10:18:02 +09:00
Jaegeuk Kim 1661d07c2d f2fs: add a tracepoint for f2fs_issue_discard
This patch adds a tracepoint for f2fs_issue_discard.

Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-12-23 10:18:00 +09:00
Tom Zanussi bac5fb97a1 tracing: Add and use generic set_trigger_filter() implementation
Add a generic event_command.set_trigger_filter() op implementation and
have the current set of trigger commands use it - this essentially
gives them all support for filters.

Syntactically, filters are supported by adding 'if <filter>' just
after the command, in which case only events matching the filter will
invoke the trigger.  For example, to add a filter to an
enable/disable_event command:

    echo 'enable_event:system:event if common_pid == 999' > \
              .../othersys/otherevent/trigger

The above command will only enable the system:event event if the
common_pid field in the othersys:otherevent event is 999.

As another example, to add a filter to a stacktrace command:

    echo 'stacktrace if common_pid == 999' > \
                   .../somesys/someevent/trigger

The above command will only trigger a stacktrace if the common_pid
field in the event is 999.

The filter syntax is the same as that described in the 'Event
filtering' section of Documentation/trace/events.txt.

Because triggers can now use filters, the trigger-invoking logic needs
to be moved in those cases - e.g. for ftrace_raw_event_calls, if a
trigger has a filter associated with it, the trigger invocation now
needs to happen after the { assign; } part of the call, in order for
the trigger condition to be tested.

There's still a SOFT_DISABLED-only check at the top of e.g. the
ftrace_raw_events function, so when an event is soft disabled but not
because of the presence of a trigger, the original SOFT_DISABLED
behavior remains unchanged.

There's also a bit of trickiness in that some triggers need to avoid
being invoked while an event is currently in the process of being
logged, since the trigger may itself log data into the trace buffer.
Thus we make sure the current event is committed before invoking those
triggers.  To do that, we split the trigger invocation in two - the
first part (event_triggers_call()) checks the filter using the current
trace record; if a command has the post_trigger flag set, it sets a
bit for itself in the return value, otherwise it directly invoks the
trigger.  Once all commands have been either invoked or set their
return flag, event_triggers_call() returns.  The current record is
then either committed or discarded; if any commands have deferred
their triggers, those commands are finally invoked following the close
of the current event by event_triggers_post_call().

To simplify the above and make it more efficient, the TRIGGER_COND bit
is introduced, which is set only if a soft-disabled trigger needs to
use the log record for filter testing or needs to wait until the
current log record is closed.

The syscall event invocation code is also changed in analogous ways.

Because event triggers need to be able to create and free filters,
this also adds a couple external wrappers for the existing
create_filter and free_filter functions, which are too generic to be
made extern functions themselves.

Link: http://lkml.kernel.org/r/7164930759d8719ef460357f143d995406e4eead.1382622043.git.tom.zanussi@linux.intel.com

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-12-21 22:02:17 -05:00
Tom Zanussi 85f2b08268 tracing: Add basic event trigger framework
Add a 'trigger' file for each trace event, enabling 'trace event
triggers' to be set for trace events.

'trace event triggers' are patterned after the existing 'ftrace
function triggers' implementation except that triggers are written to
per-event 'trigger' files instead of to a single file such as the
'set_ftrace_filter' used for ftrace function triggers.

The implementation is meant to be entirely separate from ftrace
function triggers, in order to keep the respective implementations
relatively simple and to allow them to diverge.

The event trigger functionality is built on top of SOFT_DISABLE
functionality.  It adds a TRIGGER_MODE bit to the ftrace_event_file
flags which is checked when any trace event fires.  Triggers set for a
particular event need to be checked regardless of whether that event
is actually enabled or not - getting an event to fire even if it's not
enabled is what's already implemented by SOFT_DISABLE mode, so trigger
mode directly reuses that.  Event trigger essentially inherit the soft
disable logic in __ftrace_event_enable_disable() while adding a bit of
logic and trigger reference counting via tm_ref on top of that in a
new trace_event_trigger_enable_disable() function.  Because the base
__ftrace_event_enable_disable() code now needs to be invoked from
outside trace_events.c, a wrapper is also added for those usages.

The triggers for an event are actually invoked via a new function,
event_triggers_call(), and code is also added to invoke them for
ftrace_raw_event calls as well as syscall events.

The main part of the patch creates a new trace_events_trigger.c file
to contain the trace event triggers implementation.

The standard open, read, and release file operations are implemented
here.

The open() implementation sets up for the various open modes of the
'trigger' file.  It creates and attaches the trigger iterator and sets
up the command parser.  If opened for reading set up the trigger
seq_ops.

The read() implementation parses the event trigger written to the
'trigger' file, looks up the trigger command, and passes it along to
that event_command's func() implementation for command-specific
processing.

The release() implementation does whatever cleanup is needed to
release the 'trigger' file, like releasing the parser and trigger
iterator, etc.

A couple of functions for event command registration and
unregistration are added, along with a list to add them to and a mutex
to protect them, as well as an (initially empty) registration function
to add the set of commands that will be added by future commits, and
call to it from the trace event initialization code.

also added are a couple trigger-specific data structures needed for
these implementations such as a trigger iterator and a struct for
trigger-specific data.

A couple structs consisting mostly of function meant to be implemented
in command-specific ways, event_command and event_trigger_ops, are
used by the generic event trigger command implementations.  They're
being put into trace.h alongside the other trace_event data structures
and functions, in the expectation that they'll be needed in several
trace_event-related files such as trace_events_trigger.c and
trace_events.c.

The event_command.func() function is meant to be called by the trigger
parsing code in order to add a trigger instance to the corresponding
event.  It essentially coordinates adding a live trigger instance to
the event, and arming the triggering the event.

Every event_command func() implementation essentially does the
same thing for any command:

   - choose ops - use the value of param to choose either a number or
     count version of event_trigger_ops specific to the command
   - do the register or unregister of those ops
   - associate a filter, if specified, with the triggering event

The reg() and unreg() ops allow command-specific implementations for
event_trigger_op registration and unregistration, and the
get_trigger_ops() op allows command-specific event_trigger_ops
selection to be parameterized.  When a trigger instance is added, the
reg() op essentially adds that trigger to the triggering event and
arms it, while unreg() does the opposite.  The set_filter() function
is used to associate a filter with the trigger - if the command
doesn't specify a set_filter() implementation, the command will ignore
filters.

Each command has an associated trigger_type, which serves double duty,
both as a unique identifier for the command as well as a value that
can be used for setting a trigger mode bit during trigger invocation.

The signature of func() adds a pointer to the event_command struct,
used to invoke those functions, along with a command_data param that
can be passed to the reg/unreg functions.  This allows func()
implementations to use command-specific blobs and supports code
re-use.

The event_trigger_ops.func() command corrsponds to the trigger 'probe'
function that gets called when the triggering event is actually
invoked.  The other functions are used to list the trigger when
needed, along with a couple mundane book-keeping functions.

This also moves event_file_data() into trace.h so it can be used
outside of trace_events.c.

Link: http://lkml.kernel.org/r/316d95061accdee070aac8e5750afba0192fa5b9.1382622043.git.tom.zanussi@linux.intel.com

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Idea-by: Steve Rostedt <rostedt@goodmis.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-12-20 18:40:22 -05:00
Ingo Molnar 014952270e * Add the functionality to override error reporting agents as some
machines are sporting a new extended error logging capability which, if
 done properly in the BIOS, makes a corresponding EDAC module redundant,
 from Gong Chen.
 
 * PCIe AER tracepoint severity levels fix, from Rui Wang.
 
 * Error path correction for the mce device init, from Levente Kurusa.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQIcBAABAgAGBQJSrCysAAoJEBLB8Bhh3lVK1ikP/0hKY1Kk4tjbSta9A9Z8LdQG
 9F5JzEny47DpTrLaKij7MqAlbYFO8sSm7Zw0CEztTF7Ou/H37GAuxhMlB8ECMGOm
 Dzu53X1rySTna9mB+1gyXXd+pJypp/oe18/o16rw1QKjI9o2Kfgwfj7lKvytR549
 kDM1dhxEImQIS5cpJPkOPbcpVlSqYN7BnK9/Qx3h0W70httT/8qrr9xVtVL7wjOT
 auTA0R5/TkV06FtxyfHUNULEWTSP+2yNP/iJbusR6f4Jk1j0XmyCFr0BYOkPA1UO
 9+wC9+2R+r7rJw8MBfMzNmPrRzDJHdaiHPwYqse05yewRHfRHe5cgZWJYbL8Qv0u
 2WOX+fY12EfDYlihcOYtlupRzhGfGKRsaRpSuG1zX87ctDxAfNZencv4hnaJvfqG
 Xk6ggIX6tHKEivO2gmaPsmhoKveh0zcozUs+wgh/tvV5QB6ioFCjzHfSEsix5+BH
 ryyg1ri7IZnh92g3UuSUpE0OCbAquMfI7XIJo+kFs0u79dZTL/kD3wVu6oYazwdy
 yTrvIq7Bq5cMWnnni5w7dIU09ef2uvDgyHyAS6+RiqaQxhYFsW8/yx2zJrIloWRs
 7txz6t3CVmWFiejIg2gw6KyjaG6pXRBkDkI1XU6T+bKLb31ojx2+i9UKIIUeRZTB
 iisWAOI6ZSdt4eAkgeaI
 =r//I
 -----END PGP SIGNATURE-----

Merge tag 'ras_for_3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp into x86/ras

Pull RAS updates from Borislav Petkov:

  * Add the functionality to override error reporting agents as some
  machines are sporting a new extended error logging capability which, if
  done properly in the BIOS, makes a corresponding EDAC module redundant,
  from Gong Chen.

  * PCIe AER tracepoint severity levels fix, from Rui Wang.

  * Error path correction for the mce device init, from Levente Kurusa.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-12-16 14:33:17 +01:00
Wade Farnsworth 2d01237389 [media] v4l2-dev: Add tracepoints for QBUF and DQBUF
Add tracepoints to the QBUF and DQBUF ioctls to enable rudimentary
performance measurements using standard kernel tracers.

[m.chehab@samsung.com: CodingStyle fixes (whitespacing)]
Signed-off-by: Wade Farnsworth <wade_farnsworth@mentor.com>

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-12-10 15:53:43 -02:00
Rui Wang 545104dd2b PCI, AER: Fix severity usage in aer trace event
There's inconsistency between dmesg and the trace event output.
When dmesg says "severity=Corrected", the trace event says
"severity=Fatal". What happens is that HW_EVENT_ERR_CORRECTED is
defined in edac.h:

enum hw_event_mc_err_type {
        HW_EVENT_ERR_CORRECTED,
        HW_EVENT_ERR_UNCORRECTED,
        HW_EVENT_ERR_FATAL,
        HW_EVENT_ERR_INFO,
};

while aer_print_error() uses aer_error_severity_string[] defined as:

static const char *aer_error_severity_string[] = {
        "Uncorrected (Non-Fatal)",
        "Uncorrected (Fatal)",
        "Corrected"
};

In this case dmesg is correct because info->severity is assigned in
aer_isr_one_error() using the definitions in include/linux/ras.h:

Signed-off-by: Rui Wang <rui.y.wang@intel.com>
Acked-by: Ethan Zhao <ethan.kernel@gmail.com>
Link: http://lkml.kernel.org/r/CANVTcTaP18CiGOSEcX5Ch_wPw9mEhkgokfp+d+ZOMFD+Ce4juA@mail.gmail.com
Signed-off-by: Borislav Petkov <bp@suse.de>
2013-12-08 15:39:10 +01:00
Linus Torvalds e321ae4c20 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
 "Misc kernel and tooling fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tools lib traceevent: Fix conversion of pointer to integer of different size
  perf/trace: Properly use u64 to hold event_id
  perf: Remove fragile swevent hlist optimization
  ftrace, perf: Avoid infinite event generation loop
  tools lib traceevent: Fix use of multiple options in processing field
  perf header: Fix possible memory leaks in process_group_desc()
  perf header: Fix bogus group name
  perf tools: Tag thread comm as overriden
2013-12-02 10:13:09 -08:00
Steven Rostedt (Red Hat) 4e58e54754 tracing: Allow events to have NULL strings
If an TRACE_EVENT() uses __assign_str() or __get_str on a NULL pointer
then the following oops will happen:

BUG: unable to handle kernel NULL pointer dereference at   (null)
IP: [<c127a17b>] strlen+0x10/0x1a
*pde = 00000000 ^M
Oops: 0000 [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.13.0-rc1-test+ #2
Hardware name:                  /DG965MQ, BIOS MQ96510J.86A.0372.2006.0605.1717 06/05/2006^M
task: f5cde9f0 ti: f5e5e000 task.ti: f5e5e000
EIP: 0060:[<c127a17b>] EFLAGS: 00210046 CPU: 1
EIP is at strlen+0x10/0x1a
EAX: 00000000 EBX: c2472da8 ECX: ffffffff EDX: c2472da8
ESI: c1c5e5fc EDI: 00000000 EBP: f5e5fe84 ESP: f5e5fe80
 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
CR0: 8005003b CR2: 00000000 CR3: 01f32000 CR4: 000007d0
Stack:
 f5f18b90 f5e5feb8 c10687a8 0759004f 00000005 00000005 00000005 00200046
 00000002 00000000 c1082a93 f56c7e28 c2472da8 c1082a93 f5e5fee4 c106bc61^M
 00000000 c1082a93 00000000 00000000 00000001 00200046 00200082 00000000
Call Trace:
 [<c10687a8>] ftrace_raw_event_lock+0x39/0xc0
 [<c1082a93>] ? ktime_get+0x29/0x69
 [<c1082a93>] ? ktime_get+0x29/0x69
 [<c106bc61>] lock_release+0x57/0x1a5
 [<c1082a93>] ? ktime_get+0x29/0x69
 [<c10824dd>] read_seqcount_begin.constprop.7+0x4d/0x75
 [<c1082a93>] ? ktime_get+0x29/0x69^M
 [<c1082a93>] ktime_get+0x29/0x69
 [<c108a46a>] __tick_nohz_idle_enter+0x1e/0x426
 [<c10690e8>] ? lock_release_holdtime.part.19+0x48/0x4d
 [<c10bc184>] ? time_hardirqs_off+0xe/0x28
 [<c1068c82>] ? trace_hardirqs_off_caller+0x3f/0xaf
 [<c108a8cb>] tick_nohz_idle_enter+0x59/0x62
 [<c1079242>] cpu_startup_entry+0x64/0x192
 [<c102299c>] start_secondary+0x277/0x27c
Code: 90 89 c6 89 d0 88 c4 ac 38 e0 74 09 84 c0 75 f7 be 01 00 00 00 89 f0 48 5e 5d c3 55 89 e5 57 66 66 66 66 90 83 c9 ff 89 c7 31 c0 <f2> ae f7 d1 8d 41 ff 5f 5d c3 55 89 e5 57 66 66 66 66 90 31 ff
EIP: [<c127a17b>] strlen+0x10/0x1a SS:ESP 0068:f5e5fe80
CR2: 0000000000000000
---[ end trace 01bc47bf519ec1b2 ]---

New tracepoints have been added that have allowed for NULL pointers
being assigned to strings. To fix this, change the TRACE_EVENT() code
to check for NULL and if it is, it will assign "(null)" to it instead
(similar to what glibc printf does).

Reported-by: Shuah Khan <shuah.kh@samsung.com>
Reported-by: Jovi Zhangwei <jovi.zhangwei@gmail.com>
Link: http://lkml.kernel.org/r/CAGdX0WFeEuy+DtpsJzyzn0343qEEjLX97+o1VREFkUEhndC+5Q@mail.gmail.com
Link: http://lkml.kernel.org/r/528D6972.9010702@samsung.com
Fixes: 9cbf117662 ("tracing/events: provide string with undefined size support")
Cc: stable@vger.kernel.org # 2.6.31+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2013-11-26 10:34:46 -05:00
Kent Overstreet 4f024f3797 block: Abstract out bvec iterator
Immutable biovecs are going to require an explicit iterator. To
implement immutable bvecs, a later patch is going to add a bi_bvec_done
member to this struct; for now, this patch effectively just renames
things.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Ed L. Cashin" <ecashin@coraid.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Lars Ellenberg <drbd-dev@lists.linbit.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Yehuda Sadeh <yehuda@inktank.com>
Cc: Sage Weil <sage@inktank.com>
Cc: Alex Elder <elder@inktank.com>
Cc: ceph-devel@vger.kernel.org
Cc: Joshua Morris <josh.h.morris@us.ibm.com>
Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: dm-devel@redhat.com
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux390@de.ibm.com
Cc: Boaz Harrosh <bharrosh@panasas.com>
Cc: Benny Halevy <bhalevy@tonian.com>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Dave Kleikamp <shaggy@kernel.org>
Cc: Joern Engel <joern@logfs.org>
Cc: Prasad Joshi <prasadjoshi.linux@gmail.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Ben Myers <bpm@sgi.com>
Cc: xfs@oss.sgi.com
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Guo Chao <yan@linux.vnet.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: "Roger Pau Monné" <roger.pau@citrix.com>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchand@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Peng Tao <tao.peng@emc.com>
Cc: Andy Adamson <andros@netapp.com>
Cc: fanchaoting <fanchaoting@cn.fujitsu.com>
Cc: Jie Liu <jeff.liu@oracle.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Pankaj Kumar <pankaj.km@samsung.com>
Cc: Dan Magenheimer <dan.magenheimer@oracle.com>
Cc: Mel Gorman <mgorman@suse.de>6
2013-11-23 22:33:47 -08:00