Including:
- Big cleanup of almost unsused parts of the IOMMU API by
Christoph Hellwig. This mostly affects the Freescale PAMU
driver.
- New IOMMU driver for Unisoc SOCs
- ARM SMMU Updates from Will:
- SMMUv3: Drop vestigial PREFETCH_ADDR support
- SMMUv3: Elide TLB sync logic for empty gather
- SMMUv3: Fix "Service Failure Mode" handling
- SMMUv2: New Qualcomm compatible string
- Removal of the AMD IOMMU performance counter writeable check
on AMD. It caused long boot delays on some machines and is
only needed to work around an errata on some older (possibly
pre-production) chips. If someone is still hit by this
hardware issue anyway the performance counters will just
return 0.
- Support for targeted invalidations in the AMD IOMMU driver.
Before that the driver only invalidated a single 4k page or the
whole IO/TLB for an address space. This has been extended now
and is mostly useful for emulated AMD IOMMUs.
- Several fixes for the Shared Virtual Memory support in the
Intel VT-d driver
- Mediatek drivers can now be built as modules
- Re-introduction of the forcedac boot option which got lost
when converting the Intel VT-d driver to the common dma-iommu
implementation.
- Extension of the IOMMU device registration interface and
support iommu_ops to be const again when drivers are built as
modules.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAmCMEIoACgkQK/BELZcB
GuOu9xAAvg6aR0uHlxvRq6cgNnHN9Ltp5+t3qFYtRRrauY0iOPMO62k0QQli5shX
CGeczD0e59KAZqI0zNJnQn8hMY5dg7XVkFCC5BrSzuCDCtwJZ0N5Tq3pfUlaV1rw
BJf41t79Fd+jp7kn53tu+vRAfYZ3+sLOx/6U3c15pqKRZSkyFWbQllOtD3J5LnLu
1PyPlfiNpMwCajiS7aQbN+fuJ/lKIFeA2MDPOsCBzhbfxiJUqJxZOKAZO3rOjFfK
feTibqQ+3Zz6MPXt9st1cvPpy8jCosv81OY6Knqvxf/oB5q+fEdi2uNrKISonb/t
Fw331oOIwg2A+HOpwC9MN1AumOIqiHSWWENAMk9SlP+TMIWKQ8kZreyI6IEB23dV
+QvP3DVA+CfLwtNY/Zh0IqKh28D+IHlKbpWNU1m+9AUe468mV/MTjfwxr9Yfffhm
LZ6C0DgFdmtqv8jPuDGUOgo3RNeN8bLnUSEHG9gHibA+RKujl5BWDjKkwILqMQTt
Ysdsu8TiNtFIULomizqCpgqEbQfW8TLFvASXCM1VMQ/PDURxvchZPxFDJonYXy+K
z2HGaG3eUE07YrAdRKH69aMVIbmS+sjEhvmi4xZ1Lh7wWcIE2AZVvO8qNb+Ckcp3
4tLPPDksm/iQngnFf6gdgH3qv4rgbzE4+74GXqeANiQCjY9dSJI=
=qF2C
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Big cleanup of almost unsused parts of the IOMMU API by Christoph
Hellwig. This mostly affects the Freescale PAMU driver.
- New IOMMU driver for Unisoc SOCs
- ARM SMMU Updates from Will:
- Drop vestigial PREFETCH_ADDR support (SMMUv3)
- Elide TLB sync logic for empty gather (SMMUv3)
- Fix "Service Failure Mode" handling (SMMUv3)
- New Qualcomm compatible string (SMMUv2)
- Removal of the AMD IOMMU performance counter writeable check on AMD.
It caused long boot delays on some machines and is only needed to
work around an errata on some older (possibly pre-production) chips.
If someone is still hit by this hardware issue anyway the performance
counters will just return 0.
- Support for targeted invalidations in the AMD IOMMU driver. Before
that the driver only invalidated a single 4k page or the whole IO/TLB
for an address space. This has been extended now and is mostly useful
for emulated AMD IOMMUs.
- Several fixes for the Shared Virtual Memory support in the Intel VT-d
driver
- Mediatek drivers can now be built as modules
- Re-introduction of the forcedac boot option which got lost when
converting the Intel VT-d driver to the common dma-iommu
implementation.
- Extension of the IOMMU device registration interface and support
iommu_ops to be const again when drivers are built as modules.
* tag 'iommu-updates-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (84 commits)
iommu: Streamline registration interface
iommu: Statically set module owner
iommu/mediatek-v1: Add error handle for mtk_iommu_probe
iommu/mediatek-v1: Avoid build fail when build as module
iommu/mediatek: Always enable the clk on resume
iommu/fsl-pamu: Fix uninitialized variable warning
iommu/vt-d: Force to flush iotlb before creating superpage
iommu/amd: Put newline after closing bracket in warning
iommu/vt-d: Fix an error handling path in 'intel_prepare_irq_remapping()'
iommu/vt-d: Fix build error of pasid_enable_wpe() with !X86
iommu/amd: Remove performance counter pre-initialization test
Revert "iommu/amd: Fix performance counter initialization"
iommu/amd: Remove duplicate check of devid
iommu/exynos: Remove unneeded local variable initialization
iommu/amd: Page-specific invalidations for more than one page
iommu/arm-smmu-v3: Remove the unused fields for PREFETCH_CONFIG command
iommu/vt-d: Avoid unnecessary cache flush in pasid entry teardown
iommu/vt-d: Invalidate PASID cache when root/context entry changed
iommu/vt-d: Remove WO permissions on second-level paging entries
iommu/vt-d: Report the right page fault address
...
Core changes:
- A semantic change to handle pinmux and pinconf in explicit order
while up until now we depended on the semantic order in the
device tree. The device tree is a functional programming
language and does not imply any order, so the right thing is
for the pin control core to provide these semantics.
- Add a new pinmux-select debugfs file which makes it possible to
go in and select functions for a pin manually (iteratively, at
the prompt) for debugging purposes.
- Fixes to gpio regmap handling for a new pin control driver
making use of regmap-gpio.
- Use octal permissions on debugfs files.
New drivers:
- A massive rewrite of the former custom pin control driver for
MIPS Broadcom devices to instead use the pin control subsystem.
New pin control drivers for BCM6345, BCM6328, BCM6358, BCM6362,
BCM6368, BCM63268 and BCM6318 SoC variants are implemented.
- Support for PM8350, PM8350B, PM8350C, PMK8350, PMR735A and
PMR735B in the Qualcomm PMIC GPIO driver. Also the two GPIOs
on PM8008 are supported.
- Support for the Rockchip RK3568/RK3566 pin controller.
- Support for Ingenic JZ4730, JZ4750, JZ4755, JZ4775 and
X2000.
- Support for Mediatek MTK8195.
- Add a new Xilinx ZynqMP pin control driver.
Driver improvements and non-urgent fixes:
- Modularization and improvements of the Rockchip drivers.
- Some new pins added to the description of new Renesas SoCs.
- Clarifications of the GPIO base calculation in the Intel driver.
- Fix the function names for the MPP54 and MPP55 pins in the Armada
CP110 pin controller.
- GPIO wakeup interrupt map for Qualcomm SC7280 and SM8350.
- Support for ACPI probing of the Qualcomm SC8180x.
- Fix interrupt clear status on rockchip
- Fix some missing pins on the Ingenic JZ4770, some semantic
fixes for the behaviour of the Ingenic pin controller.
Add DMIC pins for JZ4780, X1000, X1500 and X1830.
- A slew of janitorial like of_node_put() calls.
-----BEGIN PGP SIGNATURE-----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=QrEn
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"There is a lot going on!
Core changes:
- A semantic change to handle pinmux and pinconf in explicit order
while up until now we depended on the semantic order in the device
tree. The device tree is a functional programming language and does
not imply any order, so the right thing is for the pin control core
to provide these semantics.
- Add a new pinmux-select debugfs file which makes it possible to go
in and select functions for a pin manually (iteratively, at the
prompt) for debugging purposes.
- Fixes to gpio regmap handling for a new pin control driver making
use of regmap-gpio.
- Use octal permissions on debugfs files.
New drivers:
- A massive rewrite of the former custom pin control driver for MIPS
Broadcom devices to instead use the pin control subsystem. New pin
control drivers for BCM6345, BCM6328, BCM6358, BCM6362, BCM6368,
BCM63268 and BCM6318 SoC variants are implemented.
- Support for PM8350, PM8350B, PM8350C, PMK8350, PMR735A and PMR735B
in the Qualcomm PMIC GPIO driver. Also the two GPIOs on PM8008 are
supported.
- Support for the Rockchip RK3568/RK3566 pin controller.
- Support for Ingenic JZ4730, JZ4750, JZ4755, JZ4775 and X2000.
- Support for Mediatek MTK8195.
- Add a new Xilinx ZynqMP pin control driver.
Driver improvements and non-urgent fixes:
- Modularization and improvements of the Rockchip drivers.
- Some new pins added to the description of new Renesas SoCs.
- Clarifications of the GPIO base calculation in the Intel driver.
- Fix the function names for the MPP54 and MPP55 pins in the Armada
CP110 pin controller.
- GPIO wakeup interrupt map for Qualcomm SC7280 and SM8350.
- Support for ACPI probing of the Qualcomm SC8180x.
- Fix interrupt clear status on rockchip
- Fix some missing pins on the Ingenic JZ4770, some semantic fixes
for the behaviour of the Ingenic pin controller. Add DMIC pins for
JZ4780, X1000, X1500 and X1830.
- A slew of janitorial like of_node_put() calls"
* tag 'pinctrl-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits)
pinctrl: Add Xilinx ZynqMP pinctrl driver support
firmware: xilinx: Add pinctrl support
pinctrl: rockchip: do coding style for mux route struct
pinctrl: Add PIN_CONFIG_MODE_PWM to enum pin_config_param
pinctrl: Introduce MODE group in enum pin_config_param
pinctrl: Keep enum pin_config_param ordered by name
dt-bindings: pinctrl: Add binding for ZynqMP pinctrl driver
pinctrl: core: Fix kernel doc string for pin_get_name()
pinctrl: mediatek: use spin lock in mtk_rmw
pinctrl: add drive for I2C related pins on MT8195
pinctrl: add pinctrl driver on mt8195
dt-bindings: pinctrl: mt8195: add pinctrl file and binding document
pinctrl: Ingenic: Add pinctrl driver for X2000.
pinctrl: Ingenic: Add pinctrl driver for JZ4775.
pinctrl: Ingenic: Add pinctrl driver for JZ4755.
pinctrl: Ingenic: Add pinctrl driver for JZ4750.
pinctrl: Ingenic: Add pinctrl driver for JZ4730.
dt-bindings: pinctrl: Add bindings for new Ingenic SoCs.
pinctrl: Ingenic: Reformat the code.
pinctrl: Ingenic: Add DMIC pins support for Ingenic SoCs.
...
Updates for SoC specific drivers include a few subsystems that
have their own maintainers but send them through the soc tree:
TEE/OP-TEE:
- Add tracepoints around calls to secure world
Memory controller drivers:
- Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
- Add debug statistics to Tegra20 memory controller
- Update Tegra bindings and convert to dtschema
ARM SCMI Firmware:
- Support for modular SCMI protocols and vendor specific extensions
- New SCMI IIO driver
- Per-cpu DVFS
The other driver changes are all from the platform maintainers
directly and reflect the drivers that don't fit into any other
subsystem as well as treewide changes for a particular platform.
SoCFPGA:
- Various cleanups contributed by Krzysztof Kozlowski
Mediatek:
- add MT8183 support to mutex driver
- MMSYS: use per SoC array to describe the possible routing
- add MMSYS support for MT8183 and MT8167
- add support for PMIC wrapper with integrated arbiter
- add support for MT8192/MT6873
Tegra:
- Bug fixes to PMC and clock drivers
NXP/i.MX:
- Update SCU power domain driver to keep console domain power on.
- Add missing ADC1 power domain to SCU power domain driver.
- Update comments for single global power domain in SCU power domain
driver.
- Add i.MX51/i.MX53 unique id support to i.MX SoC driver.
NXP/FSL SoC driver updates for v5.13
- Add ACPI support for RCPM driver
- Use generic io{read,write} for QE drivers after performance optimized
for PowerPC
- Fix QBMAN probe to cleanup HW states correctly for kexec
- Various cleanup and style fix for QBMAN/QE/GUTS drivers
OMAP:
- Preparation to use devicetree for genpd
- ti-sysc needs iorange check improved when the interconnect target module
has no control registers listed
- ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to avoid
issues with missing resources and unnecessary deferred probe
- ti-sysc debug option can now detect more devices
- ti-sysc now warns if an old incomplete devicetree data is found as we
now rely on it being complete for am3 and 4
- soc init code needs to check for prcm and prm nodes for omap4/5 and dra7
- omap-prm driver needs to enable autoidle retention support for omap4
- omap5 clocks are missing gpmc and ocmc clock registers
- pci-dra7xx now needs to use builtin_platform_driver instead of using
builtin_platform_driver_probe for deferred probe to work
Raspberry Pi:
- Fix-up all RPi firmware drivers so as for unbind to happen in an
orderly fashion
- Support for RPi's PoE hat PWM bus
Qualcomm
- Improved detection for SCM calling conventions
- Support for OEM specific wifi firmware path
- Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=iidq
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Updates for SoC specific drivers include a few subsystems that have
their own maintainers but send them through the soc tree:
TEE/OP-TEE:
- Add tracepoints around calls to secure world
Memory controller drivers:
- Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
- Add debug statistics to Tegra20 memory controller
- Update Tegra bindings and convert to dtschema
ARM SCMI Firmware:
- Support for modular SCMI protocols and vendor specific extensions
- New SCMI IIO driver
- Per-cpu DVFS
The other driver changes are all from the platform maintainers
directly and reflect the drivers that don't fit into any other
subsystem as well as treewide changes for a particular platform.
SoCFPGA:
- Various cleanups contributed by Krzysztof Kozlowski
Mediatek:
- add MT8183 support to mutex driver
- MMSYS: use per SoC array to describe the possible routing
- add MMSYS support for MT8183 and MT8167
- add support for PMIC wrapper with integrated arbiter
- add support for MT8192/MT6873
Tegra:
- Bug fixes to PMC and clock drivers
NXP/i.MX:
- Update SCU power domain driver to keep console domain power on.
- Add missing ADC1 power domain to SCU power domain driver.
- Update comments for single global power domain in SCU power domain
driver.
- Add i.MX51/i.MX53 unique id support to i.MX SoC driver.
NXP/FSL SoC driver updates for v5.13
- Add ACPI support for RCPM driver
- Use generic io{read,write} for QE drivers after performance
optimized for PowerPC
- Fix QBMAN probe to cleanup HW states correctly for kexec
- Various cleanup and style fix for QBMAN/QE/GUTS drivers
OMAP:
- Preparation to use devicetree for genpd
- ti-sysc needs iorange check improved when the interconnect target
module has no control registers listed
- ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to
avoid issues with missing resources and unnecessary deferred probe
- ti-sysc debug option can now detect more devices
- ti-sysc now warns if an old incomplete devicetree data is found as
we now rely on it being complete for am3 and 4
- soc init code needs to check for prcm and prm nodes for omap4/5 and
dra7
- omap-prm driver needs to enable autoidle retention support for
omap4
- omap5 clocks are missing gpmc and ocmc clock registers
- pci-dra7xx now needs to use builtin_platform_driver instead of
using builtin_platform_driver_probe for deferred probe to work
Raspberry Pi:
- Fix-up all RPi firmware drivers so as for unbind to happen in an
orderly fashion
- Support for RPi's PoE hat PWM bus
Qualcomm
- Improved detection for SCM calling conventions
- Support for OEM specific wifi firmware path
- Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP"
* tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
soc: aspeed: fix a ternary sign expansion bug
memory: mtk-smi: Add device-link between smi-larb and smi-common
memory: samsung: exynos5422-dmc: handle clk_set_parent() failure
memory: renesas-rpc-if: fix possible NULL pointer dereference of resource
clk: socfpga: fix iomem pointer cast on 64-bit
soc: aspeed: Adapt to new LPC device tree layout
pinctrl: aspeed-g5: Adapt to new LPC device tree layout
ipmi: kcs: aspeed: Adapt to new LPC DTS layout
ARM: dts: Remove LPC BMC and Host partitions
dt-bindings: aspeed-lpc: Remove LPC partitioning
soc: fsl: enable acpi support in RCPM driver
soc: qcom: mdt_loader: Detect truncated read of segments
soc: qcom: mdt_loader: Validate that p_filesz < p_memsz
soc: qcom: pdr: Fix error return code in pdr_register_listener
firmware: qcom_scm: Fix kernel-doc function names to match
firmware: qcom_scm: Suppress sysfs bind attributes
firmware: qcom_scm: Workaround lack of "is available" call on SC7180
firmware: qcom_scm: Reduce locking section for __get_convention()
firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool
Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers"
...
Almost all SoC code changes this time are for the TI OMAP
platform, which continues its decade-long quest to move from
describing a complex SoC in code to device tree.
Aside from this, the Uniphier platform has a new maintainer
and some platforms have minor bugfixes and cleanups that were
not urgent enough for v5.12.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmCC2JoACgkQmmx57+YA
GNk2jg/9HPrMBjoxNMEynsN066Dnc3AVBG8veYAigS0mJuMX3HzUqp+RNn5YxEak
0SKWgocjawi5MjtuCRmM/BO0SY4wPUMOxnqx/AE4q3u6VVpfx+XJu+1bywAx7UFC
FnqstmqFAfJDLJUe4Pfv4SuXRJYyGKBoEdRK9Xr13qSstQ1gm4ccWbtRStWCcVvv
f4J0gPK0dw99lgbCOLbrBMfz1zuxCwhILg+qZ0+WPl9NNfxurQ2+/Cj/8P/L0IH+
BoiZ5NaISWnvlBWaSTh6P7d3omhbA149CPjybUy2b/s84oNHdm7XLpwymVp941zt
sM3gBIi7UDKMfXUrjWDZAXY06MZa/62BLCHQ2Fx+A1ve9TC0AqmSmUxhB4Z8xXs2
3U97kZnTAPX9Scno9k7eDXbVXKVzlDL8zdZtGvY56x/EiAiPSJaTcaU6puNgdF9z
7IPFKdpMbePcxHN03dC17B4HYVoSTp2gCadOSRSrBmVjAoswzYKoAOHrzibCwUzI
knbsShhJe/BtxvLJ7e/hq0YZBTTZXUcX/3Iuw6C+j+9l9Cod/JhYOoHQM7gvqHv6
JRz0Wt9IrMhYBMYlf0g8zHZa7IUDAq7k6x8XwLjK/M/WdeS2tI3+Cmt5ePhlgZVb
eBPzikxcvglDojE7zTkBeC/+jlpolWQ6UfRnptSvkof1DWVPkiE=
=YFEX
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"Almost all SoC code changes this time are for the TI OMAP platform,
which continues its decade-long quest to move from describing a
complex SoC in code to device tree.
Aside from this, the Uniphier platform has a new maintainer and some
platforms have minor bugfixes and cleanups that were not urgent enough
for v5.12"
* tag 'arm-soc-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
MAINTAINERS: Update ARM/UniPhier SoCs maintainers and status
mailmap: Update email address for Nicolas Saenz
MAINTAINERS: Update BCM2711/BCM2335 maintainer's mail
ARM: exynos: correct kernel doc in platsmp
ARM: hisi: use the correct HiSilicon copyright
ARM: ux500: make ux500_cpu_die static
ARM: s3c: Use pwm_get() in favour of pwm_request() in RX1950
ARM: OMAP1: fix incorrect kernel-doc comment syntax in file
ARM: OMAP2+: fix incorrect kernel-doc comment syntax in file
ARM: OMAP2+: Use DEFINE_SPINLOCK() for spinlock
ARM: at91: pm: Move prototypes to mutually included header
ARM: OMAP2+: use true and false for bool variable
ARM: OMAP2+: add missing call to of_node_put()
ARM: OMAP2+: Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE
ARM: imx: Kconfig: Fix typo in help
ARM: mach-imx: Fix a spelling in the file pm-imx5.c
bus: ti-sysc: Warn about old dtb for dra7 and omap4/5
ARM: OMAP2+: Stop building legacy code for dra7 and omap4/5
ARM: OMAP2+: Drop legacy platform data for omap5 hwmod
ARM: OMAP2+: Drop legacy platform data for omap5 l3
...
The intent here was to return negative error codes but it actually
returns positive values. The problem is that type promotion with
ternary operations is quite complicated.
"ret" is an int. "copied" is a u32. And the snoop_file_read() function
returns long. What happens is that "ret" is cast to u32 and becomes
positive then it's cast to long and it's still positive.
Fix this by removing the ternary so that "ret" is type promoted directly
to long.
Fixes: 3772e5da44 ("drivers/misc: Aspeed LPC snoop output using misc chardev")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Patrick Venture <venture@google.com>
Link: https://lore.kernel.org/r/YIE90PSXsMTa2Y8n@mwanda
Link: https://lore.kernel.org/r/20210423000919.1249474-1-joel@jms.id.au'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Better to have a MODE group of settings to keep them together
when ordered alphabetically. Hence, rename PIN_CONFIG_LOW_POWER_MODE
to PIN_CONFIG_MODE_LOW_POWER.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210412140741.39946-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Another smaller set of fixes for three of the Arm platforms:
TI OMAP:
Fix swapped mmc device order also for omap3 that got changed with the
recent PROBE_PREFER_ASYNCHRONOUS changes. While eventually the aliases
should be board specific, all the mmc device instances are all there in
the SoC, and we do probe them by default so that PM runtime can idle the
devices if left enabled from the bootloader.
Qualcomm Snapdragon:
This bypasses the, recently introduced, interconnect handling in the
GENI (serial engine) driver when running off ACPI, as this causes the
GENI probe to fail and the Lenovo Yoga C630 to boot without keyboard
and touchpad.
Allwinner:
One 32kHz clock fix for the beelink gs1, a CD polarity fix for the SoPine,
some MAINTAINERS maintainance, and a clk / reset switch to our headers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=f2ly
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-5.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Another smaller set of fixes for three of the Arm platforms:
TI OMAP:
Fix swapped mmc device order also for omap3 that got changed with
the recent PROBE_PREFER_ASYNCHRONOUS changes. While eventually the
aliases should be board specific, all the mmc device instances are
all there in the SoC, and we do probe them by default so that PM
runtime can idle the devices if left enabled from the bootloader.
Qualcomm Snapdragon:
This bypasses the recently introduced interconnect handling in
the GENI (serial engine) driver when running off ACPI, as this
causes the GENI probe to fail and the Lenovo Yoga C630 to boot
without keyboard and touchpad.
Allwinner:
One 32kHz clock fix for the beelink gs1, a CD polarity fix for the
SoPine, some MAINTAINERS maintainance, and a clk / reset switch to
our headers"
* tag 'arm-fixes-5.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: allwinner: h6: beelink-gs1: Remove ext. 32 kHz osc reference
MAINTAINERS: Match on allwinner keyword
MAINTAINERS: Add our new mailing-list
arm64: dts: allwinner: Fix SD card CD GPIO for SOPine systems
arm64: dts: allwinner: h6: Switch to macros for RSB clock/reset indices
ARM: OMAP2+: Fix uninitialized sr_inst
ARM: dts: Fix swapped mmc order for omap3
ARM: OMAP2+: Fix warning for omap_init_time_of()
soc: qcom: geni: shield geni_icc_get() for ACPI boot
- Add ACPI support for RCPM driver
- Use generic io{read,write} for QE drivers after performance optimized
for PowerPC
- Fix QBMAN probe to cleanup HW states correctly for kexec
- Various cleanup and style fix for QBMAN/QE/GUTS drivers
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEhb3UXAyxp6UQ0v6khtxQDvusFVQFAmBvf7gACgkQhtxQDvus
FVTBLxAAgo7FWiVCMD+wnMy3nceAV4U9OZljumEKfvt7g27oMN9i/AWaWwzJ+wsF
zxMK9p0u8wCTG7PQIGbC4N1fRAaapc1w3TzDhFK4Uf5kqaoddqiFMf4IeRFmnYSF
6GDbxgxdZkvyGpYJ31Uo750UmC1Q9zmNoh17Nrs2wN12FLFlmiABokklzOuwKBxI
DLzdgbuTuBxGAv/6zSBmye391C0kf+ky6haOpyzHKToBnYJv/LyaGQGEGckfsnct
uKnigu7MjU+1l0LhftAT52UoFRR6SeyguqYbq4JAFvNJd66eNpZZpyJnGX8y7hJN
V8y4cvgeJBZl1ssVQVNA5sJSb9NCyPx0svwZqzJ3kdMWd8t8n2l4FrJSdPnjvCbz
HRwSzoMmSrQJZp+2LJATSHsHZz5ArBp+o79fLjWf/1aYO92B6MkZvdiL45ATl9uF
XOQJITdHI1rFWxXmu9rzUcgZx81LEf5jVP+L3GBrOIpPa6R0SQgXLInflVxoB+/l
SaJRp5CKjBstOvswJlA0dNyMNSn07qNjiR67Gvh7UXGvIa8w0Njv41ZYms2zvErd
6EIM1SuzrkByrq3zn+AiCNzTATgIJgU+JDq7doKwqCzBW9oBshZ9U3KKDdElqLv9
2UjMpP5dIkdbjh9vHZ+BwutuSjDwkkJrk40deck+9Q3/ZkNPvug=
=+DV0
-----END PGP SIGNATURE-----
Merge tag 'soc-fsl-next-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/drivers
NXP/FSL SoC driver updates for v5.13
- Add ACPI support for RCPM driver
- Use generic io{read,write} for QE drivers after performance optimized
for PowerPC
- Fix QBMAN probe to cleanup HW states correctly for kexec
- Various cleanup and style fix for QBMAN/QE/GUTS drivers
* tag 'soc-fsl-next-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
soc: fsl: enable acpi support in RCPM driver
Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers"
tty: serial: ucc_uart: replace qe_io{read,write}* wrappers by generic io{read,write}*
soc: fsl: qe: replace qe_io{read,write}* wrappers by generic io{read,write}*
soc: fsl: guts: fix comment syntax in file
soc: fsl: guts: remove unneeded semicolon
soc: fsl: qe: Use DEFINE_SPINLOCK() for spinlock
soc: fsl: qbman: Delete useless kfree code
soc: fsl: qbman: Ensure device cleanup is run for kexec
Link: https://lore.kernel.org/r/20210409205719.27927-1-leoyang.li@nxp.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This improves the Qualcomm SCM driver logic related to detecting the
calling convention, in particular on SC7180, and fixes a few small
issues in the same.
It introduces additonal sanity checks of the size of loaded segments in
the MDT loader and adds a missing error in the return path of
pdr_register_listener().
It makes it possible to specify the OEM specific firmware path in the
wcn36xx control (and WiFi) driver.
Lastly it adds a missing path specifier in the MAINTAINERS' entry and
fixes a bunch of kerneldoc issues in various drivers.
-----BEGIN PGP SIGNATURE-----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=C6IS
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
More Qualcomm driver updates for 5.13
This improves the Qualcomm SCM driver logic related to detecting the
calling convention, in particular on SC7180, and fixes a few small
issues in the same.
It introduces additonal sanity checks of the size of loaded segments in
the MDT loader and adds a missing error in the return path of
pdr_register_listener().
It makes it possible to specify the OEM specific firmware path in the
wcn36xx control (and WiFi) driver.
Lastly it adds a missing path specifier in the MAINTAINERS' entry and
fixes a bunch of kerneldoc issues in various drivers.
* tag 'qcom-drivers-for-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: mdt_loader: Detect truncated read of segments
soc: qcom: mdt_loader: Validate that p_filesz < p_memsz
soc: qcom: pdr: Fix error return code in pdr_register_listener
firmware: qcom_scm: Fix kernel-doc function names to match
firmware: qcom_scm: Suppress sysfs bind attributes
firmware: qcom_scm: Workaround lack of "is available" call on SC7180
firmware: qcom_scm: Reduce locking section for __get_convention()
firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool
soc: qcom: wcnss_ctrl: Allow reading firmware-name from DT
soc: qcom: wcnss_ctrl: Introduce local variable "dev"
dt-bindings: soc: qcom: wcnss: Add firmware-name property
soc: qcom: address kernel-doc warnings
MAINTAINERS: add another entry for ARM/QUALCOMM SUPPORT
Link: https://lore.kernel.org/r/20210409162001.775851-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
These patches fix the ASPEED LPC bindings and LPC-related device drivers
so in the future the KCS driver can properly use the hardware.
-----BEGIN PGP SIGNATURE-----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=U2zj
-----END PGP SIGNATURE-----
Merge tag 'aspeed-5.13-lpc' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/drivers
ASPEED LPC updates for 5.13
These patches fix the ASPEED LPC bindings and LPC-related device drivers
so in the future the KCS driver can properly use the hardware.
* tag 'aspeed-5.13-lpc' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
soc: aspeed: Adapt to new LPC device tree layout
pinctrl: aspeed-g5: Adapt to new LPC device tree layout
ipmi: kcs: aspeed: Adapt to new LPC DTS layout
ARM: dts: Remove LPC BMC and Host partitions
dt-bindings: aspeed-lpc: Remove LPC partitioning
Link: https://lore.kernel.org/r/CACPK8Xcb12LsVr7CUaXXjQskKbVjb7x+jgueG1Hik-kBPWtDSg@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add check against LPC device v2 compatible string to
ensure that the fixed device tree layout is adopted.
The LPC register offsets are also fixed accordingly.
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210319062752.145730-5-andrew@aj.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
This patch enables ACPI support in RCPM driver.
Signed-off-by: Peng Ma <peng.ma@nxp.com>
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
This introduces SC7280 and SM8350 support in the RPMH power-domain
driver, SC7280 support to the LLCC driver, SC7280 support tot he AOSS
QMP driver, cleanups to the RPMH driver and a few smaller fixes to the
SMEM, QMI and EBI2 drivers.
-----BEGIN PGP SIGNATURE-----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=sgiW
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for 5.13
This introduces SC7280 and SM8350 support in the RPMH power-domain
driver, SC7280 support to the LLCC driver, SC7280 support tot he AOSS
QMP driver, cleanups to the RPMH driver and a few smaller fixes to the
SMEM, QMI and EBI2 drivers.
* tag 'qcom-drivers-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
bus: qcom: Put child node before return
dt-bindings: firmware: scm: Add sc7280 support
soc: qcom: rpmh-rsc: Fold WARN_ON() into if condition
soc: qcom: rpmh-rsc: Loop over fewer bits in irq handler
soc: qcom: rpmh-rsc: Remove tcs_is_free() API
soc: qcom: smem: Update max processor count
soc: qcom: aoss: Add AOSS QMP support for SC7280
dt-bindings: soc: qcom: aoss: Add SC7280 compatible
soc: qcom: llcc: Add configuration data for SC7280
dt-bindings: arm: msm: Add LLCC for SC7280
soc: qcom: Fix typos in the file qmi_encdec.c
soc: qcom: rpmhpd: Add sc7280 powerdomains
dt-bindings: power: rpmpd: Add sc7280 to rpmpd binding
soc: qcom: rpmhpd: Add SM8350 power domains
dt-bindings: power: Add rpm power domain bindings for SM8350
Link: https://lore.kernel.org/r/20210404164951.713045-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This bypasses the, recently introduced, interconnect handling in the
GENI (serial engine) driver when running off ACPI, as this causes the
GENI probe to fail and the Lenovo Yoga C630 to boot without keyboard and
touchpad.
-----BEGIN PGP SIGNATURE-----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=w0Zm
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-fixes-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm fix for 5.12
This bypasses the, recently introduced, interconnect handling in the
GENI (serial engine) driver when running off ACPI, as this causes the
GENI probe to fail and the Lenovo Yoga C630 to boot without keyboard and
touchpad.
* tag 'qcom-drivers-fixes-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: geni: shield geni_icc_get() for ACPI boot
Link: https://lore.kernel.org/r/20210404155604.712236-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Given that no validation of how much data the firmware loader read in
for a given segment truncated segment files would best case result in a
hash verification failure, without any indication of what went wrong.
Improve this by validating that the firmware loader did return the
amount of data requested.
Fixes: 445c2410a4 ("soc: qcom: mdt_loader: Use request_firmware_into_buf()")
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20210107232526.716989-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The code validates that segments of p_memsz bytes of a segment will fit
in the provided memory region, but does not validate that p_filesz bytes
will, which means that an incorrectly crafted ELF header might write
beyond the provided memory region.
Fixes: 051fb70fd4 ("remoteproc: qcom: Driver for the self-authenticating Hexagon v5")
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20210107233119.717173-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Most of the changes again are devicetree fixes, but there are also five
trivial build fixes for issues I found when test building with gcc-11 or
when running 'make W=1', and some OMAP platform specific code fixups.
Broadcom
- One revert for a Raspberry pi interrupt controller change that
caused a regression.
TI OMAP:
- Remove unused duplicate sha2md5_fck clock node that can race with the
OMAP4_SHA2MD5_CLKCTRL clock node for disable for unused clocks
- Add aliases for omap4/5 mmc to put the slots back into the right
order again
- Fix typo for bionic voltage controllers that accidentally use mpu
for all instances instead of mpu, core and iva
- Fix random hangs for droid4 caused by missing fix from TI Android
kernel tree to do a dummy smc call on cpuidle wakeup path
NXP i.MX:
- Fix a system failure on imx6qdl-phytec-pfla02 board when booting from
SD, by adding missing vmmc supply for SD interfaces.
- Fix address typo in i.MX8MM/Q IOMUXC_SD1_DATA0_GPIO2_IO2 definition.
Marvell mvebu:
- Fix storm interrupt on Turris Omnia
- Enable hardware buffer management as it should be
Build fixes for PXA, Freescale, Marvell, OMAP1 an Keystone.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=YY35
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Most of the changes again are devicetree fixes, but there are also
five trivial build fixes for issues I found when test building with
gcc-11 or when running 'make W=1', and some OMAP platform specific
code fixups.
Broadcom:
- One revert for a Raspberry pi interrupt controller change that
caused a regression.
TI OMAP:
- Remove unused duplicate sha2md5_fck clock node that can race with
the OMAP4_SHA2MD5_CLKCTRL clock node for disable for unused clocks
- Add aliases for omap4/5 mmc to put the slots back into the right
order again
- Fix typo for bionic voltage controllers that accidentally use mpu
for all instances instead of mpu, core and iva
- Fix random hangs for droid4 caused by missing fix from TI Android
kernel tree to do a dummy smc call on cpuidle wakeup path
NXP i.MX:
- Fix a system failure on imx6qdl-phytec-pfla02 board when booting
from SD, by adding missing vmmc supply for SD interfaces.
- Fix address typo in i.MX8MM/Q IOMUXC_SD1_DATA0_GPIO2_IO2
definition.
Marvell mvebu:
- Fix storm interrupt on Turris Omnia
- Enable hardware buffer management as it should be
... and build fixes for PXA, Freescale, Marvell, OMAP1 and Keystone"
* tag 'arm-fixes-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: turris-omnia: configure LED[2]/INTn pin as interrupt pin
ARM: dts: turris-omnia: fix hardware buffer management
Revert "arm64: dts: marvell: armada-cp110: Switch to per-port SATA interrupts"
ARM: mvebu: avoid clang -Wtautological-constant warning
ARM: pxa: mainstone: avoid -Woverride-init warning
ARM: omap1: fix building with clang IAS
soc/fsl: qbman: fix conflicting alignment attributes
ARM: keystone: fix integer overflow warning
ARM: dts: imx6: pbab01: Set vmmc supply for both SD interfaces
arm64: dts: imx8mm/q: Fix pad control of SD1_DATA0
ARM: OMAP4: PM: update ROM return address for OSWR and OFF
ARM: OMAP4: Fix PMIC voltage domains for bionic
ARM: dts: Fix moving mmc devices with aliases for omap4 & 5
ARM: dts: Drop duplicate sha2md5_fck to fix clk_disable race
Revert "ARM: dts: bcm2711: Add the BSC interrupt controller"
Instead of a separate call to enable all devices from the list, just
enable the liodn once the device is attached to the iommu domain.
This also remove the DOMAIN_ATTR_FSL_PAMU_ENABLE iommu_attr.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-11-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add a fsl_pamu_configure_l1_stash API that qman_portal can call directly
instead of indirecting through the iommu attr API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-8-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The only thing that fsl_pamu_window_enable does for the current caller
is to fill in the prot value in the only dma_window structure, and to
propagate a few values from the iommu_domain_geometry struture into the
dma_window. Remove the dma_window entirely, hardcode the prot value and
otherwise use the iommu_domain_geometry structure instead.
Remove the now unused ->domain_window_enable iommu method.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-7-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The only domains allocated forces use of a single window. Remove all
the code related to multiple window support, as well as the need for
qman_portal to force a single window.
Remove the now unused DOMAIN_ATTR_WINDOWS iommu_attr.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-6-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The default geometry is the same as the one set by qman_port given
that FSL_PAMU depends on having 64-bit physical and thus DMA addresses.
Remove the support to update the geometry and remove the now pointless
geom_size field.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210401155256.298656-4-hch@lst.de
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit 6ac9b61786 ("soc: fsl: qe: introduce qe_io{read,write}*
wrappers") added specific I/O accessors for qe because at that
time ioread/iowrite functions were sub-optimal on powerpc/32
compared to the architecture specific in_/out_ IO accessors.
But as ioread/iowrite accessors are now equivalent since
commit 894fa235eb ("powerpc: inline iomap accessors"),
use them in order to allow removal of the qe specific ones.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Eliminate the following coccicheck warning:
./drivers/soc/fsl/guts.c:120:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
spinlock can be initialized automatically with DEFINE_SPINLOCK()
rather than explicitly calling spin_lock_init().
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
The parameter of kfree function is NULL, so kfree code is useless, delete it.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Make sure that the QBMan device cleanup routines are executed
when the device was previously initialized. This is needed for
kexec since the device will keep it's state from the previous
kernel that was executing.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Add routing table for DSI on MT8167 SoC. The registers are mostly
incompatible with the current defines, so new one for MT8167 are added.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Link: https://lore.kernel.org/r/20210405200354.2194930-2-fparent@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The WLAN NV firmware blob differs between platforms, and possibly
devices, so add support in the wcnss_ctrl driver for reading the path of
this file from DT in order to allow these files to live in a generic
file system (or linux-firmware).
The new property is optional and the code falls back to the old filename
if the property isn't specified.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Aníbal Limón <anibal.limon@linaro.org>
Link: https://lore.kernel.org/r/20210312003318.3273536-5-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The header file <linux/errno.h> is already included above and can be
removed here.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Here is a single serial driver fix for 5.12-rc6. Is is a revert of a
change that showed up in 5.9 that has been reported to cause problems.
It has been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYGhHew8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykyOQCgwM7aKSHU9MuRiyU8jVk1qEEwfHgAn3YcQ6bY
2IWKKJ4MUo2Iks/+2HS7
=oGYE
-----END PGP SIGNATURE-----
Merge tag 'tty-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fix from Greg KH:
"Here is a single serial driver fix for 5.12-rc6. Is is a revert of a
change that showed up in 5.9 that has been reported to cause problems.
It has been in linux-next for a while with no reported issues"
* tag 'tty-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
soc: qcom-geni-se: Cleanup the code to remove proxy votes
MMSYS:
- use per SoC array to describe the possible routing
- add support for MT8183
Power management domains:
- fix the case of a domain fails to get added
- add names for each power domain to make debugging easier
PMIC wrapper:
- add support for PMIC wrapper with integrated arbiter
- add support for MT8192/MT6873
-----BEGIN PGP SIGNATURE-----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=o2Cq
-----END PGP SIGNATURE-----
Merge tag 'v5.12-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers
- add MT8183 support to mutex driver
MMSYS:
- use per SoC array to describe the possible routing
- add support for MT8183
Power management domains:
- fix the case of a domain fails to get added
- add names for each power domain to make debugging easier
PMIC wrapper:
- add support for PMIC wrapper with integrated arbiter
- add support for MT8192/MT6873
* tag 'v5.12-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
soc: mediatek: pm-domains: Add a power domain names for mt8167
soc: mediatek: pm-domains: Add a power domain names for mt8192
soc: mediatek: pm-domains: Add a power domain names for mt8183
soc: mediatek: pm-domains: Add a meaningful power domain name
soc: mediatek: Make symbol 'mtk_mutex_driver' static
soc: mediatek: mmsys: Add mt8183 mmsys routing table
soc: mediatek: pwrap: add pwrap driver for MT6873/8192 SoCs
dt-bindings: mediatek: add compatible for MT6873/8192 pwrap
soc: mediatek: pwrap: add arbiter capability
soc: mediatek: pwrap: use BIT() macro
soc: mediatek: pm-domains: Fix missing error code in scpsys_add_subdomain()
soc: mediatek: mmsys: Use an array for setting the routing registers
soc: mediatek: mmsys: Create struct mtk_mmsys to store context data
soc: mediatek: add mtk mutex support for MT8183
Link: https://lore.kernel.org/r/c47d4bdd-9e05-c0de-bacb-3a262fed936d@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Contains a couple of fixes to the PMC power domain implementation and
exports a regmap from PMC needed to implement USB sleepwalk support.
-----BEGIN PGP SIGNATURE-----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=yqQ7
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.13-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
soc/tegra: Changes for v5.13-rc1
Contains a couple of fixes to the PMC power domain implementation and
exports a regmap from PMC needed to implement USB sleepwalk support.
* tag 'tegra-for-5.13-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Print out domain name when reset fails to acquire
soc/tegra: pmc: Ensure that clock rates aren't too high
soc/tegra: pmc: Fix completion of power-gate toggling
soc/tegra: pmc: Fix imbalanced clock disabling in error code path
soc/tegra: regulators: Fix locking up when voltage-spread is out of range
soc/tegra: pmc: Provide USB sleepwalk register map
Link: https://lore.kernel.org/r/20210401172622.3352990-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Update SCU power domain driver to keep console domain power on.
- Add missing ADC1 power domain to SCU power domain driver.
- Update comments for single global power domain in SCU power domain
driver.
- Add i.MX51/i.MX53 unique id support to i.MX SoC driver.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmBj4/MUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7SzwgAp87KmLQiV43FSrMfWCiW7+W2KkKI
grCf702h9HzqjJQ8F+Ha6Fy+sNuK1PU3idERm8DOHULSAu7Z3oyzku16r8iU2sYm
wfFZNUiwQi4L+ldgaLmAgqHuDJThS4vclk5TxS8WwGa4q5Wqm5Rle8Lj76/YFDFq
vwILI/pFUnXSRC7lXb8mhcJ8+gytWgh9Vle6ZWe6roCfvGKnwTsK2n7lq5FUFvV+
7a5mRtjTigXeVYWdNan98W3M9B0pKZSOOrOiBhRxgB2wI3f+4SIQHj/ojc2nMsXm
eQKPLOm+1BMSRrLz6lqioUcmP72O/lMB3m+Z20fiyPdsmE5qoAdpOW1qRg==
=75HC
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers change for 5.13:
- Update SCU power domain driver to keep console domain power on.
- Add missing ADC1 power domain to SCU power domain driver.
- Update comments for single global power domain in SCU power domain
driver.
- Add i.MX51/i.MX53 unique id support to i.MX SoC driver.
* tag 'imx-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
firmware: imx: scu-pd: add missed ADC1 pd
firmware: imx: scu-pd: Update comments for single global power domain
firmware: imx: scu-pd: do not power off console domain
soc: imx: add i.MX51/i.MX53 unique id support
Link: https://lore.kernel.org/r/20210331041019.31345-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
changes for 5.13, please pull the following:
- Rafal updates the Broadcom PMB binding to support BCM63138 and updates
the code to support resetting the 63138 SATA controller
-----BEGIN PGP SIGNATURE-----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=M+kT
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.13/drivers' of https://github.com/Broadcom/stblinux into arm/drivers
This pull request contains Broadcom ARM/ARM64/MIPS based SoCs drivers
changes for 5.13, please pull the following:
- Rafal updates the Broadcom PMB binding to support BCM63138 and updates
the code to support resetting the 63138 SATA controller
* tag 'arm-soc/for-5.13/drivers' of https://github.com/Broadcom/stblinux:
soc: bcm: bcm-pmb: add BCM63138 SATA support
dt-bindings: power: bcm-pmb: add BCM63138 binding
Link: https://lore.kernel.org/r/20210330184006.1451315-3-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In order to move omap4/5 and dra7 to probe with devicetree data and genpd,
we need to patch the related drivers to prepare.
These are mostly ti-sysc interconnect target module driver changes and soc
init changes. However, there are minor changes to other drivers too. There
are changes for pci-dra7xx probe, omap-prm idle configuration, and a omap5
clock change:
- ti-sysc needs iorange check improved when the interconnect target module
has no control registers listed
- ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to avoid
issues with missing resources and unnecessary deferred probe
- ti-sysc debug option can now detect more devices
- ti-sysc now warns if an old incomplete devicetree data is found as we
now rely on it being complete for am3 and 4
- soc init code needs to check for prcm and prm nodes for omap4/5 and
dra7
- omap-prm driver needs to enable autoidle retention support for omap4
- omap5 clocks are missing gpmc and ocmc clock registers
- pci-dra7xx now needs to use builtin_platform_driver instead of using
builtin_platform_driver_probe for deferred probe to work
There are also few minor non-urgent fixes:
- soc init code pdata_quirks_init_clocks should be static
- ti-sysc has few unneeded semiconon typos
- ti-sysc can use kzalloc instead of kcalloc for a single element
-----BEGIN PGP SIGNATURE-----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=lf62
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.13/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/drivers
Driver changes for omaps for genpd support for v5.13
In order to move omap4/5 and dra7 to probe with devicetree data and genpd,
we need to patch the related drivers to prepare.
These are mostly ti-sysc interconnect target module driver changes and soc
init changes. However, there are minor changes to other drivers too. There
are changes for pci-dra7xx probe, omap-prm idle configuration, and a omap5
clock change:
- ti-sysc needs iorange check improved when the interconnect target module
has no control registers listed
- ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to avoid
issues with missing resources and unnecessary deferred probe
- ti-sysc debug option can now detect more devices
- ti-sysc now warns if an old incomplete devicetree data is found as we
now rely on it being complete for am3 and 4
- soc init code needs to check for prcm and prm nodes for omap4/5 and
dra7
- omap-prm driver needs to enable autoidle retention support for omap4
- omap5 clocks are missing gpmc and ocmc clock registers
- pci-dra7xx now needs to use builtin_platform_driver instead of using
builtin_platform_driver_probe for deferred probe to work
There are also few minor non-urgent fixes:
- soc init code pdata_quirks_init_clocks should be static
- ti-sysc has few unneeded semiconon typos
- ti-sysc can use kzalloc instead of kcalloc for a single element
* tag 'omap-for-v5.13/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Use kzalloc for allocating only one thing
bus: ti-sysc: remove unneeded semicolon
ARM: OMAP2+: Make symbol 'pdata_quirks_init_clocks' static
PCI: pci-dra7xx: Prepare for deferred probe with module_platform_driver
clk: ti: omap5: Add missing gpmc and ocmc clkctrl
soc: ti: omap-prm: Allow hardware supported retention when idle
ARM: OMAP2+: Init both prm and prcm nodes early for clocks
bus: ti-sysc: Check for old incomplete dtb
bus: ti-sysc: Detect more modules for debugging
bus: ti-sysc: Probe for l4_wkup and l4_cfg interconnect devices first
bus: ti-sysc: Fix initializing module_pa for modules without sysc register
ARM: dts: Fix moving mmc devices with aliases for omap4 & 5
ARM: dts: Drop duplicate sha2md5_fck to fix clk_disable race
soc: ti: omap-prm: Fix occasional abort on reset deassert for dra7 iva
bus: ti-sysc: Fix warning on unbind if reset is not deasserted
ARM: OMAP2+: Fix smartreflex init regression after dropping legacy data
soc: ti: omap-prm: Fix reboot issue with invalid pcie reset map for dra7
ARM: dts: am33xx: add aliases for mmc interfaces
bus: omap_l3_noc: mark l3 irqs as IRQF_NO_THREAD
Link: https://lore.kernel.org/r/pull-1617004205-537424@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Fix-up all RPi firmware drivers so as for unbind to happen in an
orderly fashion
- Support for RPi's PoE hat PWM bus
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEErOkkGDHCg2EbPcGjlfZmHno8x/4FAmBY1LwACgkQlfZmHno8
x/6PjwgAuB0fgmN08RpGdyQWpsw7XUd56/g/92BtQ/p87khI9VP3ay8q+1AYGSxL
jMhSpTu6FOyhyc3y129dtoJDUslsUh5vrXqz3S1niEyYf3CHLjcyc/JPky5/HWJN
HlVwOowqLBKxVoX6AWGqRWc/axxtm9uMWeK2yiI4LYgDvq7DWhENSp4xwtffLt4q
Tg5dcqw5PbCWA2npkabnZjhLuDt1XRaLb455yn9P8tCRiqwf5fQ/8zjfcJLNhYTV
Fy/yrXyBg8RnUOlFviSbtVG0ey1BUdWkxbBd0Vxrh9iw/z+EVQdcN0DZGsKcWsXy
bK7R2sdCHmV9hjgfc4+mLPKwWhyApQ==
=bA9X
-----END PGP SIGNATURE-----
Merge tag 'rpi-poe-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nsaenz/linux-rpi into arm/drivers
Raspberry Pi driver updates for v5.13:
- Fix-up all RPi firmware drivers so as for unbind to happen in an
orderly fashion
- Support for RPi's PoE hat PWM bus
* tag 'rpi-poe-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nsaenz/linux-rpi:
pwm: Add Raspberry Pi Firmware based PWM bus
dt-bindings: pwm: Add binding for RPi firmware PWM bus
input: raspberrypi-ts: Release firmware handle when not needed
staging: vchiq: Release firmware handle on unbind
soc: bcm: raspberrypi-power: Release firmware handle on unbind
reset: raspberrypi: Release firmware handle on unbind
gpio: raspberrypi-exp: Release firmware handle on unbind
clk: bcm: rpi: Release firmware handle on unbind
firmware: raspberrypi: Introduce devm_rpi_firmware_get()
firmware: raspberrypi: Keep count of all consumers
Link: https://lore.kernel.org/r/20210322174232.29549-1-nsaenz@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When building with W=1, gcc points out that the __packed attribute
on struct qm_eqcr_entry conflicts with the 8-byte alignment
attribute on struct qm_fd inside it:
drivers/soc/fsl/qbman/qman.c:189:1: error: alignment 1 of 'struct qm_eqcr_entry' is less than 8 [-Werror=packed-not-aligned]
I assume that the alignment attribute is the correct one, and
that qm_eqcr_entry cannot actually be unaligned in memory,
so add the same alignment on the outer struct.
Fixes: c535e923bb ("soc/fsl: Introduce DPAA 1.x QMan device driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210323131530.2619900-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add the power domains names for the mt8167 SoC.
Fixes: 207f13b419 ("soc: mediatek: pm-domains: Add support for mt8167")
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20210225175000.824661-4-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add the power domains names for the mt8192 SoC.
Fixes: a49d5e7a89 ("soc: mediatek: pm-domains: Add support for mt8192")
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20210225175000.824661-3-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add the power domains names for the mt8183 SoC. This removes the debugfs
errors like the following:
debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
Fixes: eb9fa767fb ("soc: mediatek: pm-domains: Add support for mt8183")
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20210225175000.824661-2-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add the power domains names to the power domain struct so we
have meaningful name for every power domain. This also removes the
following debugfs error message.
[ 2.242068] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[ 2.249949] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
[ 2.257784] debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
...
Fixes: 59b644b01c ("soc: mediatek: Add MediaTek SCPSYS power domains")
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20210225175000.824661-1-enric.balletbo@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The sparse tool complains as follows:
drivers/soc/mediatek/mtk-mutex.c:464:24: warning:
symbol 'mtk_mutex_driver' was not declared. Should it be static?
This symbol is not used outside of mtk-mutex.c, so this
commit marks it static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/20210210075656.1096251-1-weiyongjun1@huawei.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
mt8183 has different routing registers than mt8173.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20210330110423.3542163-1-hsinyi@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
MT6873/8192 are highly integrated SoCs and use PMIC_MT6359 for
power management. This patch adds pwrap master driver to
access PMIC_MT6359.
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Link: https://lore.kernel.org/r/1615563286-22126-5-git-send-email-hsin-hsiung.wang@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Linus Torvalds