Commit Graph

250 Commits

Author SHA1 Message Date
Alexander Shishkin 340837f985 intel_th: pci: Add Gemini Lake support
This adds Intel(R) Trace Hub PCI ID for Gemini Lake SOC.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
2017-03-15 14:55:18 +02:00
Alexander Shishkin 5118ccd347 intel_th: pci: Add Denverton SOC support
This adds Intel(R) Trace Hub PCI ID for Denverton SOC.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
2017-03-15 14:55:17 +02:00
Alexander Shishkin e609ccef52 intel_th: Don't leak module refcount on failure to activate
Output 'activation' may fail for the reasons of the output driver,
for example, if msc's buffer is not allocated. We forget, however,
to drop the module reference in this case. So each attempt at
activation in this case leaks a reference, preventing the module
from ever unloading.

This patch adds the missing module_put() in the activation error
path.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: stable@vger.kernel.org # v4.8+
2017-03-15 14:54:57 +02:00
Dave Jiang 11bac80004 mm, fs: reduce fault, page_mkwrite, and pfn_mkwrite to take only vmf
->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to
take a vma and vmf parameter when the vma already resides in vmf.

Remove the vma parameter to simplify things.

[arnd@arndb.de: fix ARM build]
  Link: http://lkml.kernel.org/r/20170125223558.1451224-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 17:46:54 -08:00
Mathieu Poirier 27a7e2a72c coresight: etm4x: Fix timestamp configuration when working from perf
When using the ETM4x tracers from the perf interface two trace options are
available: cycle accurate and timestamp.

Enabling the timestamp feature is done by setting TRCCONFIGR.TS (bit 11).
The position of the timestamp bit in that register coincidentally happens
to be the same as what was chosen to enable timestamping from the 'mode'
sysFS entry.  The code does the right thing but the semantic is wrong.

This patch sets TRCCONFIGR.TS explicitly, as it is done from the sysFS
interface.  That way timestamps are set the same way from both perf and
sysFS and there is no misunderstanding as to what is intended.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25 11:46:42 +01:00
Mike Leach ae3fabcda0 coresight: etm4x: Fix enabling of cycle accurate tracing in perf.
Using perf record 'cyclacc' option in cs_etm event was not setting up cycle
accurate trace correctly.

Corrects bit set in TRCCONFIGR to enable cycle accurate trace.
Programs TRCCCCTLR with a valid threshold value as required by ETMv4 spec.

Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25 11:46:42 +01:00
Wang Nan f094446390 coresight: fix kernel panic caused by invalid CPU
Commit d52c9750f1 ("coresight: reset "enable_sink" flag when need be")
caused a kernel panic because of the using of an invalid value: after
'for_each_cpu(cpu, mask)', value of local variable 'cpu' become invalid,
causes following 'cpu_to_node' access invalid memory area.

This patch brings the deleted 'cpu = cpumask_first(mask)' back.

Panic log:

 $ perf record -e cs_etm// ls

 Unable to handle kernel paging request at virtual address fffe801804af4f10
 pgd = ffff8017ce031600
 [fffe801804af4f10] *pgd=0000000000000000, *pud=0000000000000000
 Internal error: Oops: 96000004 [#1] SMP
 Modules linked in:
 CPU: 33 PID: 1619 Comm: perf Not tainted 4.7.1+ #16
 Hardware name: Huawei Taishan 2280 /CH05TEVBA, BIOS 1.10 11/24/2016
 task: ffff8017cb0c8400 ti: ffff8017cb154000 task.ti: ffff8017cb154000
 PC is at tmc_alloc_etf_buffer+0x60/0xd4
 LR is at tmc_alloc_etf_buffer+0x44/0xd4
 pc : [<ffff000008633df8>] lr : [<ffff000008633ddc>] pstate: 60000145
 sp : ffff8017cb157b40
 x29: ffff8017cb157b40 x28: 0000000000000000
 ...skip...
 7a60: ffff000008c64dc8 0000000000000006 0000000000000253 ffffffffffffffff
 7a80: 0000000000000000 0000000000000000 ffff0000080872cc 0000000000000001
 [<ffff000008633df8>] tmc_alloc_etf_buffer+0x60/0xd4
 [<ffff000008632b9c>] etm_setup_aux+0x1dc/0x1e8
 [<ffff00000816eed4>] rb_alloc_aux+0x2b0/0x338
 [<ffff00000816a5e4>] perf_mmap+0x414/0x568
 [<ffff0000081ab694>] mmap_region+0x324/0x544
 [<ffff0000081abbe8>] do_mmap+0x334/0x3e0
 [<ffff000008191150>] vm_mmap_pgoff+0xa4/0xc8
 [<ffff0000081a9a30>] SyS_mmap_pgoff+0xb0/0x22c
 [<ffff0000080872e4>] sys_mmap+0x18/0x28
 [<ffff0000080843f0>] el0_svc_naked+0x24/0x28
 Code: 912040a5 d0001c00 f873d821 911c6000 (b8656822)
 ---[ end trace 98933da8f92b0c9a ]---

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Xia Kaixu <xiakaixu@huawei.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Fixes: d52c9750f1 ("coresight: reset "enable_sink" flag when need be")
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: stable <stable@vger.kernel.org> # 4.10
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25 11:46:42 +01:00
Suzuki K Poulose 4474f4c40a coresight: STM: Balance enable/disable
The stm is automatically enabled when an application sets the policy
via ->link() call back by using coresight_enable(), which keeps the
refcount of the current users of the STM. However, the unlink() callback
issues stm_disable() directly, which leaves the STM turned off, without
the coresight layer knowing about it. This prevents any further uses
of the STM hardware as the coresight layer still thinks the STM is
turned on and doesn't enable the hardware when required. Even manually
enabling the STM via sysfs can't really enable the hw.

e.g,

 $ echo 1 > $CS_DEVS/$ETR/enable_sink
 $ mkdir -p $CONFIG_FS/stp-policy/$source.0/stm_test/
 $ echo 32768 65535 > $CONFIG_FS/stp-policy/$source.0/stm_test/channels
 $ echo 64 > $CS_DEVS/$source/traceid
 $ ./stm_app
 Sending 64000 byte blocks of pattern 0 at 0us intervals
 Success to map channel(32768~32783) to 0xffffa95fa000
 Sending on channel 32768
 $ dd if=/dev/$ETR of=~/trace.bin.1
 597+1 records in
 597+1 records out
 305920 bytes (306 kB) copied, 0.399952 s, 765 kB/s
 $ ./stm_app
 Sending 64000 byte blocks of pattern 0 at 0us intervals
 Success to map channel(32768~32783) to 0xffff7e9e2000
 Sending on channel 32768
 $ dd if=/dev/$ETR of=~/trace.bin.2
 0+0 records in
 0+0 records out
 0 bytes (0 B) copied, 0.0232083 s, 0.0 kB/s

 Note that we don't get any data from the ETR for the second session.

 Also dmesg shows :

 [   77.520458] coresight-tmc 20800000.etr: TMC-ETR enabled
 [   77.537097] coresight-replicator etr_replicator@20890000: REPLICATOR enabled
 [   77.558828] coresight-replicator main_replicator@208a0000: REPLICATOR enabled
 [   77.581068] coresight-funnel 208c0000.main_funnel: FUNNEL inport 0 enabled
 [   77.602217] coresight-tmc 20840000.etf: TMC-ETF enabled
 [   77.618422] coresight-stm 20860000.stm: STM tracing enabled
 [  139.554252] coresight-stm 20860000.stm: STM tracing disabled
  # End of first tracing session
 [  146.351135] coresight-tmc 20800000.etr: TMC read start
 [  146.514486] coresight-tmc 20800000.etr: TMC read end
  # Note that the STM is not turned on via stm_generic_link()->coresight_enable()
  # and hence none of the components are turned on.
 [  152.479080] coresight-tmc 20800000.etr: TMC read start
 [  152.542632] coresight-tmc 20800000.etr: TMC read end

This patch fixes the problem by balancing the unlink operation by using
the coresight_disable(), keeping the coresight layer in sync with the
hardware state and thus allowing normal usage of the STM component.

Fixes: commit 237483aa5c ("coresight: stm: adding driver for CoreSight STM component")
Cc: Pratik Patel <pratikp@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org # 4.7+
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Reported-by: Robert Walker <robert.walker@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19 12:42:25 +01:00
Thomas Gleixner 36e5b0e391 coresight/etm3/4x: Consolidate hotplug state space
Even if both drivers are compiled in only one instance can run on a given
system depending on the available tracer cell.

So having seperate hotplug states for them is pointless.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: http://lkml.kernel.org/r/20161221192112.162765484@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-25 10:47:44 +01:00
Thomas Gleixner 73c1b41e63 cpu/hotplug: Cleanup state names
When the state names got added a script was used to add the extra argument
to the calls. The script basically converted the state constant to a
string, but the cleanup to convert these strings into meaningful ones did
not happen.

Replace all the useless strings with 'subsys/xxx/yyy:state' strings which
are used in all the other places already.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Link: http://lkml.kernel.org/r/20161221192112.085444152@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-25 10:47:44 +01:00
Linus Torvalds 179a7ba680 This release has a few updates:
o STM can hook into the function tracer
  o Function filtering now supports more advance glob matching
  o Ftrace selftests updates and added tests
  o Softirq tag in traces now show only softirqs
  o ARM nop added to non traced locations at compile time
  o New trace_marker_raw file that allows for binary input
  o Optimizations to the ring buffer
  o Removal of kmap in trace_marker
  o Wakeup and irqsoff tracers now adhere to the set_graph_notrace file
  o Other various fixes and clean ups
 
 Note, there are two patches marked for stable. These were discovered
 near the end of the 4.9 rc release cycle. By the time I had them tested
 it was just a matter of days before 4.9 would be released, and I
 figured I would just submit them in the merge window. They are old
 bugs and not critical. Nothing non-root could abuse.
 -----BEGIN PGP SIGNATURE-----
 
 iQExBAABCAAbBQJYUrFHFBxyb3N0ZWR0QGdvb2RtaXMub3JnAAoJEMm5BfJq2Y3L
 2+AIAIr20kSQV/nA5htGAeCTobVk3WUxY6bvjd9mIJDKPP19akNLyREW0G3KnfCr
 yhx4aFRZG98fRu/6F8qieRosyN36lADDVYHelMFHMpcTOpE2aZGjaaOuNGxOEA9v
 FmMPTX+K3+dzKyFP4l68R3+5JuQ1/AqLTioTWeLW8IDQ2OOVsjD8+0BuXrNKMJDY
 o6U4Hk5U/vn+zHc6BmgBzloAXemBd7iJ1t5V3FRRGvm8yv3HU85Twc5ofGeYTWvB
 J8PboEywRlIzxg0Kd8mxnMI5PgaKZSEc2ub8E7cY/CZ5PYpDE2xDA2hJmJgfYp00
 1VW+DHRpRZfElsCcya6S6P4bs5Y=
 =MGZ/
 -----END PGP SIGNATURE-----

Merge tag 'trace-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:
 "This release has a few updates:

   - STM can hook into the function tracer
   - Function filtering now supports more advance glob matching
   - Ftrace selftests updates and added tests
   - Softirq tag in traces now show only softirqs
   - ARM nop added to non traced locations at compile time
   - New trace_marker_raw file that allows for binary input
   - Optimizations to the ring buffer
   - Removal of kmap in trace_marker
   - Wakeup and irqsoff tracers now adhere to the set_graph_notrace file
   - Other various fixes and clean ups"

* tag 'trace-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (42 commits)
  selftests: ftrace: Shift down default message verbosity
  kprobes/trace: Fix kprobe selftest for newer gcc
  tracing/kprobes: Add a helper method to return number of probe hits
  tracing/rb: Init the CPU mask on allocation
  tracing: Use SOFTIRQ_OFFSET for softirq dectection for more accurate results
  tracing/fgraph: Have wakeup and irqsoff tracers ignore graph functions too
  fgraph: Handle a case where a tracer ignores set_graph_notrace
  tracing: Replace kmap with copy_from_user() in trace_marker writing
  ftrace/x86_32: Set ftrace_stub to weak to prevent gcc from using short jumps to it
  tracing: Allow benchmark to be enabled at early_initcall()
  tracing: Have system enable return error if one of the events fail
  tracing: Do not start benchmark on boot up
  tracing: Have the reg function allow to fail
  ring-buffer: Force rb_end_commit() and rb_set_commit_to_write() inline
  ring-buffer: Froce rb_update_write_stamp() to be inlined
  ring-buffer: Force inline of hotpath helper functions
  tracing: Make __buffer_unlock_commit() always_inline
  tracing: Make tracepoint_printk a static_key
  ring-buffer: Always inline rb_event_data()
  ring-buffer: Make rb_reserve_next_event() always inlined
  ...
2016-12-15 13:49:34 -08:00
Quentin Lambert ec98960e0b coresight: perf: Add a missing call to etm_free_aux
Most error branches following the call to alloc_event_data contain a call
to etm_free_aux. This patch add a call to etm_free_aux to an error branch
that does not call it.

This issue was found with Hector.

Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29 20:05:32 +01:00
Suzuki K Poulose bcb5b815de coresight: Add support for ARM Coresight STM-500
Add the PIDs for STM-500 to the known STM devices list.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Chunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29 20:05:32 +01:00
Suzuki K. Poulose 675a502305 coresight: tmc: Remove duplicate memset
The tmc_etr_enable_hw() fills the buffer with 0's before enabling
the hardware. So, we don't need an explicit memset() in
tmc_enable_etr_sink_sysfs() before calling the tmc_etr_enable_hw().
This patch removes the explicit memset from tmc_enable_etr_sink_sysfs.

Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29 20:05:32 +01:00
Suzuki K. Poulose c38e505e27 coresight: tmc: Get rid of mode parameter for helper routines
Get rid of the superfluous mode parameter and the check for
the mode in tmc_etX_enable_sink_{perf/sysfs}. While at it, also
remove the unnecessary WARN_ON() checks.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29 20:05:32 +01:00
Suzuki K. Poulose 297ab90f15 coresight: tmc: Cleanup operation mode handling
The mode of operation of the TMC tracked in drvdata->mode is defined
as a local_t type. This is always checked and modified under the
drvdata->spinlock and hence we don't need local_t for it and the
unnecessary synchronisation instructions that comes with it. This
change makes the code a bit more cleaner.

Also fixes the order in which we update the drvdata->mode to
CS_MODE_DISABLED. i.e, in tmc_disable_etX_sink we change the
mode to CS_MODE_DISABLED before invoking tmc_disable_etX_hw()
which in turn depends on the mode to decide whether to dump the
trace to a buffer.

Applies on mathieu's coresight/next tree [1]

https://git.linaro.org/kernel/coresight.git next

Reported-by: Venkatesh Vivekanandan <venkatesh.vivekanandan@broadcom.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29 20:05:32 +01:00
Mathieu Poirier d52c9750f1 coresight: reset "enable_sink" flag when need be
When using coresight from the perf interface sinks are specified
as part of the perf command line.  As such the sink needs to be
disabled once it has been acknowledged by the coresight framework.
Otherwise the sink stays enabled, which may interfere with other
sessions.

This patch removes the sink selection check from the build path
process and make it a function on it's own.  The function is
then used when operating from sysFS or perf to determine what
sink has been selected.

If operated from perf the status of the "enable_sink" flag is
reset so that concurrent session can use a different sink.  When
used from sysFS the status of the flag is left untouched since
users have full control.

The implementation doesn't handle a scenario where a sink has
been enabled from sysFS and another sink is selected from the
perf command line as both modes of operation are mutually
exclusive.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29 20:05:32 +01:00
Muhammad Abdul WAHAB a39f841a5b coresight: etm3x: Adding missing features of Coresight PTM components
In the current driver for Coresight components, two features of PTM
components are missing:

1. Branch Broadcasting (present also in ETM but called Branch Output)
2. Return Stack (only present in PTM v1.0 and PTMv1.1)

These features can be added simply to the code using `mode` field of
`etm_config` struct.

1. **Branch Broadcast** : The branch broadcast feature is present in ETM
components as well and is called Branch output. It allows to retrieve
addresses for direct branch addresses alongside the indirect branch
addresses. For example, it could be useful in cases when tracing without
source code.
2. **Return Stack** : The return stack option allows to retrieve the
return addresses of function calls. It can be useful to avoid CRA
(Code Reuse Attacks) by keeping a shadowstack.

Signed-off-by: Muhammad Abdul Wahab <muhammadabdul.wahab@centralesupelec.fr>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29 20:05:32 +01:00
Muhammad Abdul WAHAB a3e4df85b0 coresight: etm3x: indentation fix (extra space removed)
An extra space is removed.

Signed-off-by: Muhammad Abdul Wahab <muhammadabdul.wahab@centralesupelec.fr>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29 20:05:32 +01:00
Chunyan Zhang 9870ef5c58 coresight: stm: return error code instead of zero in .packet()
In STM framework driver, the trace data writing loop would keep running
until it received a negative return value or the whole trace packet has
been written to STM device.  So if the .packet() of STM device always
returns zero since the device is not enabled or the parameter isn't
supported, STM framework driver will stall into a dead loop.

Returning -EACCES (Permission denied) in .packet() if the device is
disabled makes more sense, and this is the same for returning -EINVAL
if the channel passed into is not supported.

Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29 20:05:32 +01:00
Chunyan Zhang 9dfed80d87 stm: Mark the functions of writing STM with notrace
If CONFIG_STM_SOURCE_FTRACE is selected, Function trace data can be
writen to sink via STM, all functions that related to writing data
packets to STM should be marked 'notrace' to avoid being traced by
Ftrace, otherwise the program would stall into an endless loop.

Link: http://lkml.kernel.org/r/1479715043-6534-7-git-send-email-zhang.chunyan@linaro.org

Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-11-22 17:48:04 -05:00
Chunyan Zhang 9b5e3ff6b9 stm dummy: Mark dummy_stm_packet() with notrace
If CONFIG_STM_SOURCE_FTRACE is selected, Function trace data can be
writen to sink via STM, all functions that related to writing data
packets to STM should be marked 'notrace' to avoid being traced by
Ftrace, otherwise the program would stall into an endless loop.

Link: http://lkml.kernel.org/r/1479715043-6534-6-git-send-email-zhang.chunyan@linaro.org

Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-11-22 17:48:00 -05:00
Chunyan Zhang 22975be20f intel_th: Mark sth_stm_packet() with notrace
If CONFIG_STM_SOURCE_FTRACE is selected, Function trace data can be
writen to sink via STM, all functions that related to writing data
packets to STM should be marked 'notrace' to avoid being traced by
Ftrace, otherwise the program would stall into an endless loop.

Link: http://lkml.kernel.org/r/1479715043-6534-5-git-send-email-zhang.chunyan@linaro.org

Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-11-22 17:47:56 -05:00
Chunyan Zhang dea5d0e1fc coresight: Mark stm_generic_packet() with notrace
If CONFIG_STM_SOURCE_FTRACE is selected, Function trace data can be
writen to sink via STM, all functions that related to writing data
packets to STM should be marked 'notrace' to avoid being traced by
Ftrace, otherwise the program would stall into an endless loop.

Link: http://lkml.kernel.org/r/1479715043-6534-4-git-send-email-zhang.chunyan@linaro.org

Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-11-22 17:47:53 -05:00
Chunyan Zhang 262e1f6e39 stm class: ftrace: Add ftrace-export-over-stm driver
This patch adds a driver that models itself as an stm_source called
stm_ftrace. Once the stm device and stm_ftrace have been linked via
sysfs, the driver registers itself as a trace_export and everything
passed to the interface from Ftrace subsystem will end up in the STM
trace engine.

Link: http://lkml.kernel.org/r/1479715043-6534-3-git-send-email-zhang.chunyan@linaro.org

Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-11-22 17:47:48 -05:00
Alexander Shishkin d4f5f545da intel_th: gth: Handle host mode correctly
When detecting host debugger mode either though a module option or via
the scratchpad register, do not export any configuration or capture
related attributes to userspace and refuse attempts by the output drivers
to configure output ports.

This way, GTH can still act as a hub and ensure that the other components
that rely on its presence continue to function properly, namely the
source devices.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
2016-11-18 17:11:35 +02:00
Alexander Shishkin c49a75910c intel_th: Support Host Debugger mode of operation
This patch adds a 'host_mode' module option to enable host-driven
operational mode in the driver. In this mode, the driver does not
perform trace configuration or enable trace capture, but still
provides all the means necessary for software trace sources to
write their data to the Trace Hub. This means that the debug host
takes care of all the configuration and enabling and we do not
interfere.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
2016-11-18 17:07:54 +02:00
Alexander Shishkin 77c98b28ee intel_th: Constify subdevices
The subdevice array consists of immutable objects, make them const.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
2016-11-18 17:07:18 +02:00
Johan Hovold a0ebf519b8 stm class: Fix device leak in open error path
Make sure to drop the reference taken by class_find_device() also on
allocation errors in open().

Signed-off-by: Johan Hovold <johan@kernel.org>
Fixes: 7bd1d4093c ("stm class: Introduce an abstraction for...")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
2016-11-18 16:54:39 +02:00
Baoyou Xie 0ef7528d15 coresight: tmc: mark symbols static where possible
We get a few warnings when building kernel with W=1:
drivers/hwtracing/coresight/coresight-tmc-etr.c:23:6: warning: no previous prototype for 'tmc_etr_enable_hw' [-Wmissing-prototypes]
drivers/hwtracing/coresight/coresight-tmc-etf.c:25:6: warning: no previous prototype for 'tmc_etb_enable_hw' [-Wmissing-prototypes]
drivers/hwtracing/coresight/coresight-tmc.c:250:9: warning: no previous prototype for ‘trigger_cntr_show’ [-Wmissing-prototypes]
...

In fact, these functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
so this patch marks these functions with 'static'.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-09 13:53:00 +02:00
Mathieu Poirier 8e67cdbc2f coresight: perf: deal with error condition properly
Function coresight_build_path() should return -ENOMEM when kzalloc
fails to allocated the requested memory.  That way callers can deal
with the error condition in a similar way.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-09 13:52:59 +02:00
Mathieu Poirier e97b1c6a8d coresight: etm4x: adding configurable start/stop filtering
With this patch we add start/stop filtering as specified on
the perf cmd line.  When the IP matches the start address
trace generation gets triggered.  The stop condition is
achieved when the IP matches the stop address.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 13:05:44 +02:00
Mathieu Poirier 2703d74c13 coresight: etm4x: adding configurable address range filtering
This patch adds the capability to specify address ranges from
the perf cmd line using the --filter option.  If the IP
falls within the range(s) program flow traces are generated.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 13:05:44 +02:00
Mathieu Poirier f0d30cc30e coresight: etm4x: configuring include/exclude function
The include/exclude function of a tracer is applicable to address
range and start/stop filters.  To avoid duplication and reuse code
moving the include/exclude configuration to a function of its own.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 13:05:44 +02:00
Mathieu Poirier 6cccf66354 coresight: etm4x: adding range filter configuration function
Introducing a new function to do address range configuration
generic enough to work for any address range and any comparator.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 13:05:43 +02:00
Mathieu Poirier 5edd944b43 coresight: etm4x: cleaning up default filter configuration
The default filter configuration was hard to read and included
some redundancy.  This patch attempts to stream line configuration
and improve readability.

No change of functionality is included.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 13:05:43 +02:00
Mathieu Poirier 2a5695a585 coresight: etm4x: split default and filter configuration
Splitting the steps involved in the configuration of a tracer.
The first part is generic and can be reused for both sysFS and
Perf methods.

The second part pertains to the configuration of filters
themselves where the source of the information used to
configure the filters will vary depending on the access
methods.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 13:05:43 +02:00
Mathieu Poirier ca878b1466 coresight: etm-perf: configuring filters from perf core
This patch implements the required API needed to access
and retrieve range and start/stop filters from the perf core.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 13:05:43 +02:00
Mathieu Poirier 2b7adc460f coresight: remove duplicated enumeration
Both ETMv3 and ETMv4 drivers are declaring an 'enum etm_addr_type',
creating reduncancy.

This patch removes the enumeration from the driver files and adds
it to a common header.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 13:05:43 +02:00
Mathieu Poirier 68905d73df coresight: etm-perf: pass struct perf_event to source::enable/disable()
With this commit [1] address range filter information is now found
in the struct hw_perf_event::addr_filters.  As such pass the event
itself to the coresight_source::enable/disable() functions so that
both event attribute and filter can be accessible for configuration.

[1] 'commit 375637bc52 ("perf/core: Introduce address range filtering")'

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 13:05:43 +02:00
Sudeep Holla 3224dcc5a6 coresight: fix handling of ETM trace register access via sysfs
The ETM registers are classified into 2 categories: trace and management.
The core power domain contains most of the trace unit logic including
all(except TRCOSLAR and TRCOSLSR) the trace registers. The debug power
domain contains the external debugger interface including all management
registers.

This patch adds coresight unit specific function coresight_simple_func
which can be used for ETM trace registers by providing a ETM specific
read function which does smp cross call to ensure the trace core is
powered up before the register is accessed.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 13:05:43 +02:00
Sudeep Holla 46a3d5cdb0 coresight: etm4x: request to retain power to the trace unit when active
The Coresight ETMv4 architecture provides a way to request to keep the
power to the trace unit. This might help to collect the traces without
the need to disable the CPU power management(entering/exiting deeper
idle states).

Trace PowerDown Control Register provides powerup request bit which when
set requests the system to retain power to the trace unit and emulate
the powerdown request.

Typically, a trace unit drives a signal to the power controller to
request that the trace unit core power domain is powered up. However,
if the trace unit and the CPU are in the same power domain then the
implementation might combine the trace unit power up status with a
signal from the CPU.

This patch requests to retain power to the trace unit when active and
to remove when inactive. Note this change will only request but the
behaviour depends on the implementation. However, it matches the
exact behaviour expected when the external debugger is connected with
respect to CPU power states.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 13:05:43 +02:00
Markus Elfring 1d37ae5067 coresight: tmc: Delete an unnecessary check before the function call "kfree"
The kfree() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 13:05:43 +02:00
Wei Yongjun 57a3668beb coresight: etm4x: remove duplicated include from coresight-etm4x.c
Remove duplicated include.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 13:05:43 +02:00
Suzuki K Poulose 9486295ad1 coresight: Use local coresight_desc instances
Each coresight device prepares a description for coresight_register()
in struct coresight_desc. Once we register the device, the description is
useless and can be freed. The coresight_desc is small enough (48bytes on
64bit)i to be allocated on the stack. Hence use an automatic variable to
avoid a needless dynamic allocation and wasting the memory(which will only
be free'd when the device is destroyed).

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 13:05:43 +02:00
Peter Chen 7f73b0b9fa hwtracing: coresight: of_coresight: add missing of_node_put after calling of_parse_phandle
of_node_put needs to be called when the device node which is got
from of_parse_phandle has finished using.

Cc: linux-arm-kernel@lists.infradead.org
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 13:05:43 +02:00
Olivier Schonken 2a18d7267a coresight-etm3x: Add ARM ETM 3.5 Cortex-A5 peripheral ID
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 13:05:43 +02:00
Mathieu Poirier cd9e3474bb coresight: add PM runtime calls to coresight_simple_func()
It is mandatory to enable a coresight block's power domain before
trying to access management registers.  Otherwise the transaction
simply stalls, leading to a system hang.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 13:05:42 +02:00
Mathieu Poirier 62d39ac934 coresight: delay initialisation when children are missing
Depending on when CoreSight device are discovered it is possible
that some IP block may be referencing devices that have not been
added to the bus yet.  The end result is missing nodes in the
CoreSight topology even when the devices are present and properly
initialised.

This patch solves the problem by asking the driver core to
try initialising the device at a later time when the children
of a CoreSight node are missing.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 13:05:42 +02:00
Suzuki K Poulose 67337e8d8d coresight: Add better messages for coresight_timeout
When we encounter a timeout waiting for a status change via
coresight_timeout, the caller always print the offset which
was tried. This is pretty much useless as it doesn't specify
the bit position we wait for. Also, one needs to lookup the
TRM to figure out, what was wrong. This patch changes all
such error messages to print something more meaningful.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 13:05:42 +02:00