For some long forgotten reason, the nfs_client cl_flags field is
initialised in nfs_get_client() instead of being initialised at
allocation time. This quirk was harmless until we moved the call to
nfs_create_rpc_client().
Fixes: dd99e9f98f ("NFSv4: Initialise connection to the server in nfs4_alloc_client()")
Cc: stable@vger.kernel.org # 4.8.x
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Guillaume Nault says:
====================
inet: Separate DSCP from ECN bits using new dscp_t type
The networking stack currently doesn't clearly distinguish between DSCP
and ECN bits. The entire DSCP+ECN bits are stored in u8 variables (or
structure fields), and each part of the stack handles them in their own
way, using different macros. This has created several bugs in the past
and some uncommon code paths are still unfixed.
Such bugs generally manifest by selecting invalid routes because of ECN
bits interfering with FIB routes and rules lookups (more details in the
LPC 2021 talk[1] and in the RFC of this series[2]).
This patch series aims at preventing the introduction of such bugs (and
detecting existing ones), by introducing a dscp_t type, representing
"sanitised" DSCP values (that is, with no ECN information), as opposed
to plain u8 values that contain both DSCP and ECN information. dscp_t
makes it clear for the reader what we're working on, and Sparse can
flag invalid interactions between dscp_t and plain u8.
This series converts only a few variables and structures:
* Patch 1 converts the tclass field of struct fib6_rule. It
effectively forbids the use of ECN bits in the tos/dsfield option
of ip -6 rule. Rules now match packets solely based on their DSCP
bits, so ECN doesn't influence the result any more. This contrasts
with the previous behaviour where all 8 bits of the Traffic Class
field were used. It is believed that this change is acceptable as
matching ECN bits wasn't usable for IPv4, so only IPv6-only
deployments could be depending on it. Also the previous behaviour
made DSCP-based ip6-rules fail for packets with both a DSCP and an
ECN mark, which is another reason why any such deploy is unlikely.
* Patch 2 converts the tos field of struct fib4_rule. This one too
effectively forbids defining ECN bits, this time in ip -4 rule.
Before that, setting ECN bit 1 was accepted, while ECN bit 0 was
rejected. But even when accepted, the rule would never match, as
the packets would have their ECN bits cleared before doing the
rule lookup.
* Patch 3 converts the fc_tos field of struct fib_config. This is
equivalent to patch 2, but for IPv4 routes. Routes using a
tos/dsfield option with any ECN bit set is now rejected. Before
this patch, they were accepted but, as with ip4 rules, these routes
couldn't match any packet, since their ECN bits are cleared before
the lookup.
* Patch 4 converts the fa_tos field of struct fib_alias. This one is
pure internal u8 to dscp_t conversion. While patches 1-3 had user
facing consequences, this patch shouldn't have any side effect and
is there to give an overview of what future conversion patches will
look like. Conversions are quite mechanical, but imply some code
churn, which is the price for the extra clarity a possibility of
type checking.
To summarise, all the behaviour changes required for the dscp_t type
approach to work should be contained in patches 1-3. These changes are
edge cases of ip-route and ip-rule that don't currently work properly.
So they should be safe. Also, a kernel selftest is added for each of
them.
Finally, this work also paves the way for allowing the usage of the 3
high order DSCP bits in IPv4 (a few call paths already handle them, but
in general the stack clears them before IPv4 rule and route lookups).
References:
[1] LPC 2021 talk:
- https://linuxplumbersconf.org/event/11/contributions/943/
- Direct link to slide deck:
https://linuxplumbersconf.org/event/11/contributions/943/attachments/901/1780/inet_tos_lpc2021.pdf
[2] RFC version of this series:
- https://lore.kernel.org/netdev/cover.1638814614.git.gnault@redhat.com/
====================
Link: https://lore.kernel.org/r/cover.1643981839.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the new dscp_t type to replace the fa_tos field of fib_alias. This
ensures ECN bits are ignored and makes the field compatible with the
fc_dscp field of struct fib_config.
Converting old *tos variables and fields to dscp_t allows sparse to
flag incorrect uses of DSCP and ECN bits. This patch is entirely about
type annotation and shouldn't change any existing behaviour.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Acked-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the new dscp_t type to replace the fc_tos field of fib_config, to
ensure IPv4 routes aren't influenced by ECN bits when configured with
non-zero rtm_tos.
Before this patch, IPv4 routes specifying an rtm_tos with some of the
ECN bits set were accepted. However they wouldn't work (never match) as
IPv4 normally clears the ECN bits with IPTOS_RT_MASK before doing a FIB
lookup (although a few buggy code paths don't).
After this patch, IPv4 routes specifying an rtm_tos with any ECN bit
set is rejected.
Note: IPv6 routes ignore rtm_tos altogether, any rtm_tos is accepted,
but treated as if it were 0.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Acked-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the new dscp_t type to replace the tos field of struct fib4_rule,
so that fib4-rules consistently ignore ECN bits.
Before this patch, fib4-rules did accept rules with the high order ECN
bit set (but not the low order one). Also, it relied on its callers
masking the ECN bits of ->flowi4_tos to prevent those from influencing
the result. This was brittle and a few call paths still do the lookup
without masking the ECN bits first.
After this patch fib4-rules only compare the DSCP bits. ECN can't
influence the result anymore, even if the caller didn't mask these
bits. Also, fib4-rules now must have both ECN bits cleared or they will
be rejected.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Acked-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Define a dscp_t type and its appropriate helpers that ensure ECN bits
are not taken into account when handling DSCP.
Use this new type to replace the tclass field of struct fib6_rule, so
that fib6-rules don't get influenced by ECN bits anymore.
Before this patch, fib6-rules didn't make any distinction between the
DSCP and ECN bits. Therefore, rules specifying a DSCP (tos or dsfield
options in iproute2) stopped working as soon a packets had at least one
of its ECN bits set (as a work around one could create four rules for
each DSCP value to match, one for each possible ECN value).
After this patch fib6-rules only compare the DSCP bits. ECN doesn't
influence the result anymore. Also, fib6-rules now must have the ECN
bits cleared or they will be rejected.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Acked-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reading the PTP clock is a simple operation requiring only 3 register
reads. Under a PREEMPT_RT kernel, protecting those reads by a spin_lock is
counter-productive: if the 2nd task preempting the 1st has a higher prio
but needs to read time as well, it will require 2 context switches, which
will pretty much always be more costly than just disabling preemption for
the duration of the reads. Moreover, with the code logic recently added
to get_systime(), disabling preemption is not even required anymore:
reads and writes just need to be protected from each other, to prevent a
clock read while the clock is being updated.
Improve the above situation by replacing the PTP spinlock by a rwlock, and
using read_lock for PTP clock reads so simultaneous reads do not block
each other.
Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com>
Link: https://lore.kernel.org/r/20220204135545.2770625-1-yannick.vignon@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is mandatory for a software to issue a reset upon modifying RGMII
Receive Timing Control and RGMII Transmit Timing Control bit fields of MAC
Specific Control register 2 (page 2, register 21) otherwise the changes
won't be perceived by the PHY (the same is applicable for a lot of other
registers). Not setting the RGMII delays on the platforms that imply it'
being done on the PHY side will consequently cause the traffic loss. We
discovered that the denoted soft-reset is missing in the
m88e1121_config_aneg() method for the case if the RGMII delays are
modified but the MDIx polarity isn't changed or the auto-negotiation is
left enabled, thus causing the traffic loss on our platform with Marvell
Alaska 88E1510 installed. Let's fix that by issuing the soft-reset if the
delays have been actually set in the m88e1121_config_aneg_rgmii_delays()
method.
Cc: stable@vger.kernel.org
Fixes: d6ab933647 ("net: phy: marvell: Avoid unnecessary soft reset")
Signed-off-by: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20220205203932.26899-1-Pavel.Parkhomenko@baikalelectronics.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This place also uses signed min_t and passes this singed int to
copy_to_user (which accepts unsigned argument). I don't think
there is an issue, but let's be consistent.
Fixes: 7855e0db15 ("bpf: test_run: add xdp_shared_info pointer in bpf_test_finish signature")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220204235849.14658-2-sdf@google.com
Song Liu says:
====================
Changes v8 => v9:
1. Fix an error with multi function program, in 4/9.
Changes v7 => v8:
1. Rebase and fix conflicts.
2. Lock text_mutex for text_poke_copy. (Daniel)
Changes v6 => v7:
1. Redesign the interface between generic and arch logic, based on feedback
from Alexei and Ilya.
2. Split 6/7 of v6 to 7/9 and 8/9 in v7, for cleaner logic.
3. Add bpf_arch_text_copy in 6/9.
Changes v5 => v6:
1. Make jit_hole_buffer 128 byte long. Only fill the first and last 128
bytes of header with INT3. (Alexei)
2. Use kvmalloc for temporary buffer. (Alexei)
3. Rename tmp_header/tmp_image => rw_header/rw_image. Remove tmp_image from
x64_jit_data. (Alexei)
4. Change fall back round_up_to in bpf_jit_binary_alloc_pack() from
BPF_PROG_MAX_PACK_PROG_SIZE to PAGE_SIZE.
Changes v4 => v5:
1. Do not use atomic64 for bpf_jit_current. (Alexei)
Changes v3 => v4:
1. Rename text_poke_jit() => text_poke_copy(). (Peter)
2. Change comment style. (Peter)
Changes v2 => v3:
1. Fix tailcall.
Changes v1 => v2:
1. Use text_poke instead of writing through linear mapping. (Peter)
2. Avoid making changes to non-x86_64 code.
Most BPF programs are small, but they consume a page each. For systems
with busy traffic and many BPF programs, this could also add significant
pressure to instruction TLB. High iTLB pressure usually causes slow down
for the whole system, which includes visible performance degradation for
production workloads.
This set tries to solve this problem with customized allocator that pack
multiple programs into a huge page.
Patches 1-6 prepare the work. Patch 7 contains key logic of bpf_prog_pack
allocator. Patch 8 contains bpf_jit_binary_pack_alloc logic on top of
bpf_prog_pack allocator. Patch 9 uses this allocator in x86_64 jit.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use bpf_jit_binary_pack_alloc in x86_64 jit. The jit engine first writes
the program to the rw buffer. When the jit is done, the program is copied
to the final location with bpf_jit_binary_pack_finalize.
Note that we need to do bpf_tail_call_direct_fixup after finalize.
Therefore, the text_live = false logic in __bpf_arch_text_poke is no
longer needed.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220204185742.271030-10-song@kernel.org
This is the jit binary allocator built on top of bpf_prog_pack.
bpf_prog_pack allocates RO memory, which cannot be used directly by the
JIT engine. Therefore, a temporary rw buffer is allocated for the JIT
engine. Once JIT is done, bpf_jit_binary_pack_finalize is used to copy
the program to the RO memory.
bpf_jit_binary_pack_alloc reserves 16 bytes of extra space for illegal
instructions, which is small than the 128 bytes space reserved by
bpf_jit_binary_alloc. This change is necessary for bpf_jit_binary_hdr
to find the correct header. Also, flag use_bpf_prog_pack is added to
differentiate a program allocated by bpf_jit_binary_pack_alloc.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220204185742.271030-9-song@kernel.org
Most BPF programs are small, but they consume a page each. For systems
with busy traffic and many BPF programs, this could add significant
pressure to instruction TLB. High iTLB pressure usually causes slow down
for the whole system, which includes visible performance degradation for
production workloads.
Introduce bpf_prog_pack allocator to pack multiple BPF programs in a huge
page. The memory is then allocated in 64 byte chunks.
Memory allocated by bpf_prog_pack allocator is RO protected after initial
allocation. To write to it, the user (jit engine) need to use text poke
API.
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220204185742.271030-8-song@kernel.org
This will be used to copy JITed text to RO protected module memory. On
x86, bpf_arch_text_copy is implemented with text_poke_copy.
bpf_arch_text_copy returns pointer to dst on success, and ERR_PTR(errno)
on errors.
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220204185742.271030-7-song@kernel.org
This will be used by BPF jit compiler to dump JITed binary to a RX huge
page, and thus allow multiple BPF programs sharing the a huge (2MB) page.
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/bpf/20220204185742.271030-6-song@kernel.org
Using prog->jited_len is simpler and more accurate than current
estimation (header + header->size).
Also, fix missing prog->jited_len with multi function program. This hasn't
been a real issue before this.
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220204185742.271030-5-song@kernel.org
This enables module_alloc() to allocate huge page for 2MB+ requests.
To check the difference of this change, we need enable config
CONFIG_PTDUMP_DEBUGFS, and call module_alloc(2MB). Before the change,
/sys/kernel/debug/page_tables/kernel shows pte for this map. With the
change, /sys/kernel/debug/page_tables/ show pmd for thie map.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220204185742.271030-2-song@kernel.org
-----BEGIN PGP SIGNATURE-----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=CJKx
-----END PGP SIGNATURE-----
Merge tag '5.17-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull ksmbd server fixes from Steve French:
- NTLMSSP authentication improvement
- RDMA (smbdirect) fix allowing broader set of NICs to be supported
- improved buffer validation
- additional small fixes, including a posix extensions fix for stable
* tag '5.17-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: add support for key exchange
ksmbd: reduce smb direct max read/write size
ksmbd: don't align last entry offset in smb2 query directory
ksmbd: fix same UniqueId for dot and dotdot entries
ksmbd: smbd: validate buffer descriptor structures
ksmbd: fix SMB 3.11 posix extension mount failure
On changing the RX ring parameters igb uses a hack to avoid a warning
when calling xdp_rxq_info_reg via igb_setup_rx_resources. It just
clears the struct xdp_rxq_info content.
Instead, change this to unregister if we're already registered. Align
code to the igc code.
Fixes: 9cbc948b5a ("igb: add XDP support")
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Mauricio Vásquez <mauricio@kinvolk.io> says:
====================
This series fixes a bad calculation of strict mode in two places. It
also updates libbpf to make it easier for the users to disable a
specific LIBBPF_STRICT_* flag.
v1 -> v2:
- remove check in libbpf_set_strict_mode()
- split in different commits
v1: https://lore.kernel.org/bpf/20220204220435.301896-1-mauricio@kinvolk.io/
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
"(__LIBBPF_STRICT_LAST - 1) & ~LIBBPF_STRICT_MAP_DEFINITIONS" is wrong
as it is equal to 0 (LIBBPF_STRICT_NONE). Let's use
"LIBBPF_STRICT_ALL & ~LIBBPF_STRICT_MAP_DEFINITIONS" now that the
previous commit makes it possible in libbpf.
Fixes: 93b8952d22 ("libbpf: deprecate legacy BPF map definitions")
Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220207145052.124421-4-mauricio@kinvolk.io
"(__LIBBPF_STRICT_LAST - 1) & ~LIBBPF_STRICT_MAP_DEFINITIONS" is wrong
as it is equal to 0 (LIBBPF_STRICT_NONE). Let's use
"LIBBPF_STRICT_ALL & ~LIBBPF_STRICT_MAP_DEFINITIONS" now that the
previous commit makes it possible in libbpf.
Fixes: 93b8952d22 ("libbpf: deprecate legacy BPF map definitions")
Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220207145052.124421-3-mauricio@kinvolk.io
libbpf_set_strict_mode() checks that the passed mode doesn't contain
extra bits for LIBBPF_STRICT_* flags that don't exist yet.
It makes it difficult for applications to disable some strict flags as
something like "LIBBPF_STRICT_ALL & ~LIBBPF_STRICT_MAP_DEFINITIONS"
is rejected by this check and they have to use a rather complicated
formula to calculate it.[0]
One possibility is to change LIBBPF_STRICT_ALL to only contain the bits
of all existing LIBBPF_STRICT_* flags instead of 0xffffffff. However
it's not possible because the idea is that applications compiled against
older libbpf_legacy.h would still be opting into latest
LIBBPF_STRICT_ALL features.[1]
The other possibility is to remove that check so something like
"LIBBPF_STRICT_ALL & ~LIBBPF_STRICT_MAP_DEFINITIONS" is allowed. It's
what this commit does.
[0]: https://lore.kernel.org/bpf/20220204220435.301896-1-mauricio@kinvolk.io/
[1]: https://lore.kernel.org/bpf/CAEf4BzaTWa9fELJLh+bxnOb0P1EMQmaRbJVG0L+nXZdy0b8G3Q@mail.gmail.com/
Fixes: 93b8952d22 ("libbpf: deprecate legacy BPF map definitions")
Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220207145052.124421-2-mauricio@kinvolk.io
A single patch in this pull request, from me, to fix a bug that is
causing boot issues in the field (reports of problems with Fedora 35).
The bug affects mostly old-ish drives that have issues with read log
page command handling.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCYgEmtQAKCRDdoc3SxdoY
dqucAP9P62XgGInmlT+8r4jWMoHQUjl7+s39eK9g1T8YG8R15AD/c3PUCFwZQpLx
ndEGuH1qzHIMy2682ziFHUZ4qHBBlQA=
=oV7s
-----END PGP SIGNATURE-----
Merge tag 'ata-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fix from Damien Le Moal:
"A single patch from me, to fix a bug that is causing boot issues in
the field (reports of problems with Fedora 35).
The bug affects mostly old-ish drives that have issues with read log
page command handling"
* tag 'ata-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-core: Fix ata_dev_config_cpr()
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCYgBPohQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5d5oAP99Iuskwx22LvkTsq/wtpncbpOq7PCn
m2by5qy3oSbLagD/YRDLh3ilgcvBbf152JBAOl4SRkph7bX/MGF14UZ0Zwg=
=OFwx
-----END PGP SIGNATURE-----
Merge tag 'integrity-v5.17-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity fixes from Mimi Zohar:
"Fixes for recently found bugs.
One was found/noticed while reviewing IMA support for fsverity digests
and signatures. Two of them were found/noticed while working on IMA
namespacing. Plus two other bugs.
All of them are for previous kernel releases"
* tag 'integrity-v5.17-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Do not print policy rule with inactive LSM labels
ima: Allow template selection with ima_template[_fmt]= after ima_hash=
ima: Remove ima_policy file before directory
integrity: check the return value of audit_log_start()
ima: fix reference leak in asymmetric_verify()
Some of the tests are using x86_64 ABI-specific syscall entry points
(such as __x64_sys_nanosleep and __x64_sys_getpgid). Update them to use
architecture-dependent syscall entry names.
Also update fexit_sleep test to not use BPF_PROG() so that it is clear
that the syscall parameters aren't being accessed in the bpf prog.
Note that none of the bpf progs in these tests are actually accessing
any of the syscall parameters. The only exception is perfbuf_bench, which
passes on the bpf prog context into bpf_perf_event_output() as a pointer
to pt_regs, but that looks to be mostly ignored.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/e35f7051f03e269b623a68b139d8ed131325f7b7.1643973917.git.naveen.n.rao@linux.vnet.ibm.com
On architectures that don't use a syscall wrapper, sys_* function names
are set as an alias of __se_sys_* functions. Due to this, there is no
BTF associated with sys_* function names. This results in some of the
test progs failing to load. Set the SYS_PREFIX to "__se_" to fix this
issue.
Fixes: 38261f369f ("selftests/bpf: Fix probe_user test failure with clang build kernel")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/013d632aacd3e41290445c0025db6a7055ec6e18.1643973917.git.naveen.n.rao@linux.vnet.ibm.com
The concurrent positioning ranges log page 47h is a general purpose log
page and not a subpage of the indentify device log. Using
ata_identify_page_supported() to test for concurrent positioning ranges
support is thus wrong. ata_log_supported() must be used.
Furthermore, unlike other advanced ATA features (e.g. NCQ priority),
accesses to the concurrent positioning ranges log page are not gated by
a feature bit from the device IDENTIFY data. Since many older drives
react badly to the READ LOG EXT and/or READ LOG DMA EXT commands isued
to read device log pages, avoid problems with older drives by limiting
the concurrent positioning ranges support detection to drives
implementing at least the ACS-4 ATA standard (major version 11). This
additional condition effectively turns ata_dev_config_cpr() into a nop
for older drives, avoiding problems in the field.
Fixes: fe22e1c2f7 ("libata: support concurrent positioning ranges log")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215519
Cc: stable@vger.kernel.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Abderraouf Adjal <adjal.arf@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Call mv88e6xxx_reg_unlock(chip) before returning on this error path.
Fixes: 7af4a361a6 ("net: dsa: mv88e6xxx: Improve isolation of standalone ports")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The <= ARRAY_SIZE() needs to be < ARRAY_SIZE() to prevent an out of
bounds error.
Fixes: d4ebf12bce ("net: dsa: mv88e6xxx: populate supported_interfaces and mac_capabilities")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
For the device that supports the TX push capability, the BD can
be directly copied to the device memory. However, due to hardware
restrictions, the push mode can be used only when there are no
more than two BDs, otherwise, the doorbell mode based on device
memory is used.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Syzbot once again hit uninit value in asix driver. The problem still the
same -- asix_read_cmd() reads less bytes, than was requested by caller.
Since all read requests are performed via asix_read_cmd() let's catch
usb related error there and add __must_check notation to be sure all
callers actually check return value.
So, this patch adds sanity check inside asix_read_cmd(), that simply
checks if bytes read are not less, than was requested and adds missing
error handling of asix_read_cmd() all across the driver code.
Fixes: d9fe64e511 ("net: asix: Add in_pm parameter")
Reported-and-tested-by: syzbot+6ca9f7867b77c2d316ac@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
rtl8168d_2_hw_phy_config() shares quite some functionality with
rtl8168d_1_hw_phy_config(), so let's factor out the common part to a
new function rtl8168d_1_common(). In addition improve the code a little.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
My last patch moved the netdev_tracker_alloc() call to a section
protected by a write_lock().
I should have replaced GFP_KERNEL with GFP_ATOMIC to avoid the infamous:
BUG: sleeping function called from invalid context at include/linux/sched/mm.h:256
Fixes: 28f9222138 ("net/smc: fix ref_tracker issue in smc_pnet_add()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel says:
====================
mlxsw: Add SIP and DIP mangling support
Danielle says:
On Spectrum-2 onwards, it is possible to overwrite SIP and DIP address
of an IPv4 or IPv6 packet in the ACL engine. That corresponds to pedit
munges of, respectively, ip src and ip dst fields, and likewise for ip6.
Offload these munges on the systems where they are supported.
Patchset overview:
Patch #1: introduces SIP_DIP_ACTION and its fields.
Patch #2-#3: adds the new pedit fields, and dispatches on them on
Spectrum-2 and above.
Patch #4 adds a selftest.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a test that checks that pedit adjusts source and destination
addresses of IPv4 and IPv6 packets.
Output example:
$ ./pedit_ip.sh
TEST: ping [ OK ]
TEST: ping6 [ OK ]
TEST: dev swp2 ingress pedit ip src set 198.51.100.1 [ OK ]
TEST: dev swp3 egress pedit ip src set 198.51.100.1 [ OK ]
TEST: dev swp2 ingress pedit ip dst set 198.51.100.1 [ OK ]
TEST: dev swp3 egress pedit ip dst set 198.51.100.1 [ OK ]
TEST: dev swp2 ingress pedit ip6 src set 2001:db8:2::1 [ OK ]
TEST: dev swp3 egress pedit ip6 src set 2001:db8:2::1 [ OK ]
TEST: dev swp2 ingress pedit ip6 dst set 2001:db8:2::1 [ OK ]
TEST: dev swp3 egress pedit ip6 dst set 2001:db8:2::1 [ OK ]
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Spectrum-2 supports an ACL action SIP_DIP, which allows IPv4 and IPv6
source and destination addresses change. Offload suitable mangles to
the IPv6 address change action.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Spectrum-2 supports an ACL action SIP_DIP, which allows IPv4 and IPv6
source and destination addresses change. Offload suitable mangles to
the IPv4 address change action.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add fields related to SIP_DIP_ACTION, which is used for changing of SIP
and DIP addresses.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Menglong Dong says:
====================
net: use kfree_skb_reason() for ip/udp packet receive
In this series patches, kfree_skb() is replaced with kfree_skb_reason()
during ipv4 and udp4 packet receiving path, and following drop reasons
are introduced:
SKB_DROP_REASON_SOCKET_FILTER
SKB_DROP_REASON_NETFILTER_DROP
SKB_DROP_REASON_OTHERHOST
SKB_DROP_REASON_IP_CSUM
SKB_DROP_REASON_IP_INHDR
SKB_DROP_REASON_IP_RPFILTER
SKB_DROP_REASON_UNICAST_IN_L2_MULTICAST
SKB_DROP_REASON_XFRM_POLICY
SKB_DROP_REASON_IP_NOPROTO
SKB_DROP_REASON_SOCKET_RCVBUFF
SKB_DROP_REASON_PROTO_MEM
TCP is more complex, so I left it in the next series.
I just figure out how __print_symbolic() works. It doesn't base on the
array index, but searching for symbols by loop. So I'm a little afraid
it's performance.
Changes since v3:
- fix some small problems in the third patch (net: ipv4: use
kfree_skb_reason() in ip_rcv_core()), as David Ahern said
Changes since v2:
- use SKB_DROP_REASON_PKT_TOO_SMALL for a path in ip_rcv_core()
Changes since v1:
- add document for all drop reasons, as David advised
- remove unreleated cleanup
- remove EARLY_DEMUX and IP_ROUTE_INPUT drop reason
- replace {UDP, TCP}_FILTER with SOCKET_FILTER
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() with kfree_skb_reason() in __udp_queue_rcv_skb().
Following new drop reasons are introduced:
SKB_DROP_REASON_SOCKET_RCVBUFF
SKB_DROP_REASON_PROTO_MEM
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() with kfree_skb_reason() in udp_queue_rcv_one_skb().
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Trond Myklebust