Add per queue Tx and Rx packet and byte counts.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the dynamic debug support to output information about the hardware
features reported by the device.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently whenever the driver needs to enable or disable interrupts for
a DMA channel it reads the interrupt enable register (IER), updates the
value and then writes the new value back to the IER. Since the hardware
does not change the IER, software can track this value and elimiate the
need to read it each time.
Add the IER value to the channel related data structure and use that as
the base for enabling and disabling interrupts, thus removing the need
for the MMIO read.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add some additional dynamic debug message to the driver. The new messages
will provide additional information about the PCS window calculation.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Many of the names used by the driver are based upon the name of the device
found during device probe. Move the formatting of the names into the
device open function so that any renaming that occurs before the device is
brought up will be accounted for. This also means moving the creation of
some named workqueues into the device open path.
Add support to register for net events so that if a device is renamed
the corresponding debugfs directory can be renamed.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When transmitting a TSO packet, the driver only increments the TSO packet
statistic by one rather than the number of total packets that were sent.
Update the driver to record the total number of packets that resulted from
TSO transmit.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sometimes when the driver is being unloaded while the devices are still
up the driver can issue errors. This is based on timing and the double
invocation of some routines. The phy_exit() call needs to be run after
the network device has been closed and unregistered from the system.
Also, the phy_exit() does not need to invoke phy_stop() since that will
be called as part of the device closing, so remove that call.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When running in SGMII mode at speeds below 1000Mbps, the auto-negotition
control register must set the MII control width for the MAC interface
to be 8-bits wide. By default the width is 4-bits.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the MDIO mode is set to none for the 10000Base-T, which is
incorrect. The MDIO mode should for this configuration should be
clause 45.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, if vport is zero then then an uninialized return status
in err is returned. Since the only return status at the end of the
function esw_add_uc_addr is zero for the current set of return paths
we may as well just return 0 rather than err to fix this issue.
Detected by CoverityScan, CID#1452698 ("Uninitialized scalar variable")
Fixes: eeb66cdb68 ("net/mlx5: Separate between E-Switch and MPFS")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As we know in some target's checkentry it may dereference par.entryinfo
to check entry stuff inside. But when sched action calls xt_check_target,
par.entryinfo is set with NULL. It would cause kernel panic when calling
some targets.
It can be reproduce with:
# tc qd add dev eth1 ingress handle ffff:
# tc filter add dev eth1 parent ffff: u32 match u32 0 0 action xt \
-j ECN --ecn-tcp-remove
It could also crash kernel when using target CLUSTERIP or TPROXY.
By now there's no proper value for par.entryinfo in ipt_init_target,
but it can not be set with NULL. This patch is to void all these
panics by setting it with an ipt_entry obj with all members = 0.
Note that this issue has been there since the very beginning.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In check_map_func_compatibility(), a 'break' has been accidentally
removed for the BPF_MAP_TYPE_ARRAY_OF_MAPS and BPF_MAP_TYPE_HASH_OF_MAPS
cases. This patch adds it back.
Fixes: 174a79ff95 ("bpf: sockmap with sk redirect support")
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
rxrpc_service_prealloc_one() doesn't set the socket pointer on any new call
it preallocates, but does add it to the rxrpc net namespace call list.
This, however, causes rxrpc_put_call() to oops when the call is discarded
when the socket is closed. rxrpc_put_call() needs the socket to be able to
reach the namespace so that it can use a lock held therein.
Fix this by setting a call's socket pointer immediately before discarding
it.
This can be triggered by unloading the kafs module, resulting in an oops
like the following:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000030
IP: rxrpc_put_call+0x1e2/0x32d
PGD 0
P4D 0
Oops: 0000 [#1] SMP
Modules linked in: kafs(E-)
CPU: 3 PID: 3037 Comm: rmmod Tainted: G E 4.12.0-fscache+ #213
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
task: ffff8803fc92e2c0 task.stack: ffff8803fef74000
RIP: 0010:rxrpc_put_call+0x1e2/0x32d
RSP: 0018:ffff8803fef77e08 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff8803fab99ac0 RCX: 000000000000000f
RDX: ffffffff81c50a40 RSI: 000000000000000c RDI: ffff8803fc92ea88
RBP: ffff8803fef77e30 R08: ffff8803fc87b941 R09: ffffffff82946d20
R10: ffff8803fef77d10 R11: 00000000000076fc R12: 0000000000000005
R13: ffff8803fab99c20 R14: 0000000000000001 R15: ffffffff816c6aee
FS: 00007f915a059700(0000) GS:ffff88041fb80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000030 CR3: 00000003fef39000 CR4: 00000000001406e0
Call Trace:
rxrpc_discard_prealloc+0x325/0x341
rxrpc_listen+0xf9/0x146
kernel_listen+0xb/0xd
afs_close_socket+0x3e/0x173 [kafs]
afs_exit+0x1f/0x57 [kafs]
SyS_delete_module+0x10f/0x19a
do_syscall_64+0x8a/0x149
entry_SYSCALL64_slow_path+0x25/0x25
Fixes: 2baec2c3f8 ("rxrpc: Support network namespacing")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
list.dev has not been initialized and so the copy_to_user is copying
data from the stack back to user space which is a potential
information leak. Fix this ensuring all of list is initialized to
zero.
Detected by CoverityScan, CID#1357894 ("Uninitialized scalar variable")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jesper Dangaard Brouer says:
====================
xdp: adjust xdp redirect tracepoint
Working on streamlining the tracepoints for XDP. The eBPF programs
and XDP have no flow-control or queueing. Investigating using
tracepoint to provide a feedback on XDP_REDIRECT xmit overflow events.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The return error code need to be included in the tracepoint
xdp:xdp_redirect, else its not possible to distinguish successful or
failed XDP_REDIRECT transmits.
XDP have no queuing mechanism. Thus, it is fairly easily to overrun a
NIC transmit queue. The eBPF program invoking helpers (bpf_redirect
or bpf_redirect_map) to redirect a packet doesn't get any feedback
whether the packet was actually transmitted.
Info on failed transmits in the tracepoint xdp:xdp_redirect, is
interesting as this opens for providing a feedback-loop to the
receiving XDP program.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use errno -ENOSPC ("No space left on device") when the XDP xmit
have no space left on the TX ring buffer, instead of -ENOMEM.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
enable_4k_uar module parameter was added in patch cited below to
address the backward compatibility issue in SRIOV when the VM has
system's PAGE_SIZE uar implementation and the Hypervisor has 4k uar
implementation.
The above compatibility issue does not exist in the non SRIOV case.
In this patch, we always enable 4k uar implementation if SRIOV
is not enabled on mlx4's supported cards.
Fixes: 76e39ccf9c ("net/mlx4_core: Fix backward compatibility on VFs")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the pci_find_pcie_root_port() function is called on a root port
itself, return the root port rather than NULL.
This effectively reverts commit 0e40523287 ("PCI: fix oops when
try to find Root Port for a PCI device") which added an extra check
that would now be redundant.
Fixes: a99b646afa ("PCI: Disable PCIe Relaxed Ordering if unsupported")
Fixes: c56d4450eb ("PCI: Turn off Request Attributes to avoid Chelsio T5 Completion erratum")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is useful for directly looking up a task based on class id rather than
having to scan through all open file descriptors.
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In some situations tcp_send_loss_probe() can realize that it's unable
to send a loss probe (TLP), and falls back to calling tcp_rearm_rto()
to schedule an RTO timer. In such cases, sometimes tcp_rearm_rto()
realizes that the RTO was eligible to fire immediately or at some
point in the past (delta_us <= 0). Previously in such cases
tcp_rearm_rto() was scheduling such "overdue" RTOs to happen at now +
icsk_rto, which caused needless delays of hundreds of milliseconds
(and non-linear behavior that made reproducible testing
difficult). This commit changes the logic to schedule "overdue" RTOs
ASAP, rather than at now + icsk_rto.
Fixes: 6ba8a3b19e ("tcp: Tail loss probe (TLP)")
Suggested-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently macvlan devices do not set their hw_enc_features making
encapsulated Tx packets resort to SW fallbacks. Add encapsulation GSO
offloads to ->features as is done for the other GSOs and set
->hw_enc_features.
Signed-off-by: Dimitris Michailidis <dmichail@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge misc fixes from Andrew Morton:
"14 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: revert x86_64 and arm64 ELF_ET_DYN_BASE base changes
mm/vmalloc.c: don't unconditonally use __GFP_HIGHMEM
mm/mempolicy: fix use after free when calling get_mempolicy
mm/cma_debug.c: fix stack corruption due to sprintf usage
signal: don't remove SIGNAL_UNKILLABLE for traced tasks.
mm, oom: fix potential data corruption when oom_reaper races with writer
mm: fix double mmap_sem unlock on MMF_UNSTABLE enforced SIGBUS
slub: fix per memcg cache leak on css offline
mm: discard memblock data later
test_kmod: fix description for -s -and -c parameters
kmod: fix wait on recursive loop
wait: add wait_event_killable_timeout()
kernel/watchdog: fix Kconfig constraints for perf hardlockup watchdog
mm: memcontrol: fix NULL pointer crash in test_clear_page_writeback()
syzcaller reported the following use-after-free issue in rt6_select():
BUG: KASAN: use-after-free in rt6_select net/ipv6/route.c:755 [inline] at addr ffff8800bc6994e8
BUG: KASAN: use-after-free in ip6_pol_route.isra.46+0x1429/0x1470 net/ipv6/route.c:1084 at addr ffff8800bc6994e8
Read of size 4 by task syz-executor1/439628
CPU: 0 PID: 439628 Comm: syz-executor1 Not tainted 4.3.5+ #8
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
0000000000000000 ffff88018fe435b0 ffffffff81ca384d ffff8801d3588c00
ffff8800bc699380 ffff8800bc699500 dffffc0000000000 ffff8801d40a47c0
ffff88018fe435d8 ffffffff81735751 ffff88018fe43660 ffff8800bc699380
Call Trace:
[<ffffffff81ca384d>] __dump_stack lib/dump_stack.c:15 [inline]
[<ffffffff81ca384d>] dump_stack+0xc1/0x124 lib/dump_stack.c:51
sctp: [Deprecated]: syz-executor0 (pid 439615) Use of struct sctp_assoc_value in delayed_ack socket option.
Use struct sctp_sack_info instead
[<ffffffff81735751>] kasan_object_err+0x21/0x70 mm/kasan/report.c:158
[<ffffffff817359c4>] print_address_description mm/kasan/report.c:196 [inline]
[<ffffffff817359c4>] kasan_report_error+0x1b4/0x4a0 mm/kasan/report.c:285
[<ffffffff81735d93>] kasan_report mm/kasan/report.c:305 [inline]
[<ffffffff81735d93>] __asan_report_load4_noabort+0x43/0x50 mm/kasan/report.c:325
[<ffffffff82a28e39>] rt6_select net/ipv6/route.c:755 [inline]
[<ffffffff82a28e39>] ip6_pol_route.isra.46+0x1429/0x1470 net/ipv6/route.c:1084
[<ffffffff82a28fb1>] ip6_pol_route_output+0x81/0xb0 net/ipv6/route.c:1203
[<ffffffff82ab0a50>] fib6_rule_action+0x1f0/0x680 net/ipv6/fib6_rules.c:95
[<ffffffff8265cbb6>] fib_rules_lookup+0x2a6/0x7a0 net/core/fib_rules.c:223
[<ffffffff82ab1430>] fib6_rule_lookup+0xd0/0x250 net/ipv6/fib6_rules.c:41
[<ffffffff82a22006>] ip6_route_output+0x1d6/0x2c0 net/ipv6/route.c:1224
[<ffffffff829e83d2>] ip6_dst_lookup_tail+0x4d2/0x890 net/ipv6/ip6_output.c:943
[<ffffffff829e889a>] ip6_dst_lookup_flow+0x9a/0x250 net/ipv6/ip6_output.c:1079
[<ffffffff82a9f7d8>] ip6_datagram_dst_update+0x538/0xd40 net/ipv6/datagram.c:91
[<ffffffff82aa0978>] __ip6_datagram_connect net/ipv6/datagram.c:251 [inline]
[<ffffffff82aa0978>] ip6_datagram_connect+0x518/0xe50 net/ipv6/datagram.c:272
[<ffffffff82aa1313>] ip6_datagram_connect_v6_only+0x63/0x90 net/ipv6/datagram.c:284
[<ffffffff8292f790>] inet_dgram_connect+0x170/0x1f0 net/ipv4/af_inet.c:564
[<ffffffff82565547>] SYSC_connect+0x1a7/0x2f0 net/socket.c:1582
[<ffffffff8256a649>] SyS_connect+0x29/0x30 net/socket.c:1563
[<ffffffff82c72032>] entry_SYSCALL_64_fastpath+0x12/0x17
Object at ffff8800bc699380, in cache ip6_dst_cache size: 384
The root cause of it is that in fib6_add_rt2node(), when it replaces an
existing route with the new one, it does not update fn->rr_ptr.
This commit resets fn->rr_ptr to NULL when it points to a route which is
replaced in fib6_add_rt2node().
Fixes: 2759647247 ("ipv6: fix ECMP route replacement")
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
syszkaller reported use-after-free in tipc [1]
When msg->rep skb is freed, set the pointer to NULL,
so that caller does not free it again.
[1]
==================================================================
BUG: KASAN: use-after-free in skb_push+0xd4/0xe0 net/core/skbuff.c:1466
Read of size 8 at addr ffff8801c6e71e90 by task syz-executor5/4115
CPU: 1 PID: 4115 Comm: syz-executor5 Not tainted 4.13.0-rc4+ #32
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:16 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:52
print_address_description+0x73/0x250 mm/kasan/report.c:252
kasan_report_error mm/kasan/report.c:351 [inline]
kasan_report+0x24e/0x340 mm/kasan/report.c:409
__asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:430
skb_push+0xd4/0xe0 net/core/skbuff.c:1466
tipc_nl_compat_recv+0x833/0x18f0 net/tipc/netlink_compat.c:1209
genl_family_rcv_msg+0x7b7/0xfb0 net/netlink/genetlink.c:598
genl_rcv_msg+0xb2/0x140 net/netlink/genetlink.c:623
netlink_rcv_skb+0x216/0x440 net/netlink/af_netlink.c:2397
genl_rcv+0x28/0x40 net/netlink/genetlink.c:634
netlink_unicast_kernel net/netlink/af_netlink.c:1265 [inline]
netlink_unicast+0x4e8/0x6f0 net/netlink/af_netlink.c:1291
netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1854
sock_sendmsg_nosec net/socket.c:633 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:643
sock_write_iter+0x31a/0x5d0 net/socket.c:898
call_write_iter include/linux/fs.h:1743 [inline]
new_sync_write fs/read_write.c:457 [inline]
__vfs_write+0x684/0x970 fs/read_write.c:470
vfs_write+0x189/0x510 fs/read_write.c:518
SYSC_write fs/read_write.c:565 [inline]
SyS_write+0xef/0x220 fs/read_write.c:557
entry_SYSCALL_64_fastpath+0x1f/0xbe
RIP: 0033:0x4512e9
RSP: 002b:00007f3bc8184c08 EFLAGS: 00000216 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000718000 RCX: 00000000004512e9
RDX: 0000000000000020 RSI: 0000000020fdb000 RDI: 0000000000000006
RBP: 0000000000000086 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000216 R12: 00000000004b5e76
R13: 00007f3bc8184b48 R14: 00000000004b5e86 R15: 0000000000000000
Allocated by task 4115:
save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59
save_stack+0x43/0xd0 mm/kasan/kasan.c:447
set_track mm/kasan/kasan.c:459 [inline]
kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551
kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:489
kmem_cache_alloc_node+0x13d/0x750 mm/slab.c:3651
__alloc_skb+0xf1/0x740 net/core/skbuff.c:219
alloc_skb include/linux/skbuff.h:903 [inline]
tipc_tlv_alloc+0x26/0xb0 net/tipc/netlink_compat.c:148
tipc_nl_compat_dumpit+0xf2/0x3c0 net/tipc/netlink_compat.c:248
tipc_nl_compat_handle net/tipc/netlink_compat.c:1130 [inline]
tipc_nl_compat_recv+0x756/0x18f0 net/tipc/netlink_compat.c:1199
genl_family_rcv_msg+0x7b7/0xfb0 net/netlink/genetlink.c:598
genl_rcv_msg+0xb2/0x140 net/netlink/genetlink.c:623
netlink_rcv_skb+0x216/0x440 net/netlink/af_netlink.c:2397
genl_rcv+0x28/0x40 net/netlink/genetlink.c:634
netlink_unicast_kernel net/netlink/af_netlink.c:1265 [inline]
netlink_unicast+0x4e8/0x6f0 net/netlink/af_netlink.c:1291
netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1854
sock_sendmsg_nosec net/socket.c:633 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:643
sock_write_iter+0x31a/0x5d0 net/socket.c:898
call_write_iter include/linux/fs.h:1743 [inline]
new_sync_write fs/read_write.c:457 [inline]
__vfs_write+0x684/0x970 fs/read_write.c:470
vfs_write+0x189/0x510 fs/read_write.c:518
SYSC_write fs/read_write.c:565 [inline]
SyS_write+0xef/0x220 fs/read_write.c:557
entry_SYSCALL_64_fastpath+0x1f/0xbe
Freed by task 4115:
save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59
save_stack+0x43/0xd0 mm/kasan/kasan.c:447
set_track mm/kasan/kasan.c:459 [inline]
kasan_slab_free+0x71/0xc0 mm/kasan/kasan.c:524
__cache_free mm/slab.c:3503 [inline]
kmem_cache_free+0x77/0x280 mm/slab.c:3763
kfree_skbmem+0x1a1/0x1d0 net/core/skbuff.c:622
__kfree_skb net/core/skbuff.c:682 [inline]
kfree_skb+0x165/0x4c0 net/core/skbuff.c:699
tipc_nl_compat_dumpit+0x36a/0x3c0 net/tipc/netlink_compat.c:260
tipc_nl_compat_handle net/tipc/netlink_compat.c:1130 [inline]
tipc_nl_compat_recv+0x756/0x18f0 net/tipc/netlink_compat.c:1199
genl_family_rcv_msg+0x7b7/0xfb0 net/netlink/genetlink.c:598
genl_rcv_msg+0xb2/0x140 net/netlink/genetlink.c:623
netlink_rcv_skb+0x216/0x440 net/netlink/af_netlink.c:2397
genl_rcv+0x28/0x40 net/netlink/genetlink.c:634
netlink_unicast_kernel net/netlink/af_netlink.c:1265 [inline]
netlink_unicast+0x4e8/0x6f0 net/netlink/af_netlink.c:1291
netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1854
sock_sendmsg_nosec net/socket.c:633 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:643
sock_write_iter+0x31a/0x5d0 net/socket.c:898
call_write_iter include/linux/fs.h:1743 [inline]
new_sync_write fs/read_write.c:457 [inline]
__vfs_write+0x684/0x970 fs/read_write.c:470
vfs_write+0x189/0x510 fs/read_write.c:518
SYSC_write fs/read_write.c:565 [inline]
SyS_write+0xef/0x220 fs/read_write.c:557
entry_SYSCALL_64_fastpath+0x1f/0xbe
The buggy address belongs to the object at ffff8801c6e71dc0
which belongs to the cache skbuff_head_cache of size 224
The buggy address is located 208 bytes inside of
224-byte region [ffff8801c6e71dc0, ffff8801c6e71ea0)
The buggy address belongs to the page:
page:ffffea00071b9c40 count:1 mapcount:0 mapping:ffff8801c6e71000 index:0x0
flags: 0x200000000000100(slab)
raw: 0200000000000100 ffff8801c6e71000 0000000000000000 000000010000000c
raw: ffffea0007224a20 ffff8801d98caf48 ffff8801d9e79040 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8801c6e71d80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
ffff8801c6e71e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8801c6e71e80: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff8801c6e71f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8801c6e71f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Jon Maloy <jon.maloy@ericsson.com>
Cc: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
syzkaller reported a double free [1], caused by the fact
that tun driver was not updated properly when priv_destructor
was added.
When/if register_netdevice() fails, priv_destructor() must have been
called already.
[1]
BUG: KASAN: double-free or invalid-free in selinux_tun_dev_free_security+0x15/0x20 security/selinux/hooks.c:5023
CPU: 0 PID: 2919 Comm: syzkaller227220 Not tainted 4.13.0-rc4+ #23
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:16 [inline]
dump_stack+0x194/0x257 lib/dump_stack.c:52
print_address_description+0x7f/0x260 mm/kasan/report.c:252
kasan_report_double_free+0x55/0x80 mm/kasan/report.c:333
kasan_slab_free+0xa0/0xc0 mm/kasan/kasan.c:514
__cache_free mm/slab.c:3503 [inline]
kfree+0xd3/0x260 mm/slab.c:3820
selinux_tun_dev_free_security+0x15/0x20 security/selinux/hooks.c:5023
security_tun_dev_free_security+0x48/0x80 security/security.c:1512
tun_set_iff drivers/net/tun.c:1884 [inline]
__tun_chr_ioctl+0x2ce6/0x3d50 drivers/net/tun.c:2064
tun_chr_ioctl+0x2a/0x40 drivers/net/tun.c:2309
vfs_ioctl fs/ioctl.c:45 [inline]
do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685
SYSC_ioctl fs/ioctl.c:700 [inline]
SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691
entry_SYSCALL_64_fastpath+0x1f/0xbe
RIP: 0033:0x443ff9
RSP: 002b:00007ffc34271f68 EFLAGS: 00000217 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00000000004002e0 RCX: 0000000000443ff9
RDX: 0000000020533000 RSI: 00000000400454ca RDI: 0000000000000003
RBP: 0000000000000086 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000217 R12: 0000000000401ce0
R13: 0000000000401d70 R14: 0000000000000000 R15: 0000000000000000
Allocated by task 2919:
save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59
save_stack+0x43/0xd0 mm/kasan/kasan.c:447
set_track mm/kasan/kasan.c:459 [inline]
kasan_kmalloc+0xaa/0xd0 mm/kasan/kasan.c:551
kmem_cache_alloc_trace+0x101/0x6f0 mm/slab.c:3627
kmalloc include/linux/slab.h:493 [inline]
kzalloc include/linux/slab.h:666 [inline]
selinux_tun_dev_alloc_security+0x49/0x170 security/selinux/hooks.c:5012
security_tun_dev_alloc_security+0x6d/0xa0 security/security.c:1506
tun_set_iff drivers/net/tun.c:1839 [inline]
__tun_chr_ioctl+0x1730/0x3d50 drivers/net/tun.c:2064
tun_chr_ioctl+0x2a/0x40 drivers/net/tun.c:2309
vfs_ioctl fs/ioctl.c:45 [inline]
do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685
SYSC_ioctl fs/ioctl.c:700 [inline]
SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691
entry_SYSCALL_64_fastpath+0x1f/0xbe
Freed by task 2919:
save_stack_trace+0x16/0x20 arch/x86/kernel/stacktrace.c:59
save_stack+0x43/0xd0 mm/kasan/kasan.c:447
set_track mm/kasan/kasan.c:459 [inline]
kasan_slab_free+0x6e/0xc0 mm/kasan/kasan.c:524
__cache_free mm/slab.c:3503 [inline]
kfree+0xd3/0x260 mm/slab.c:3820
selinux_tun_dev_free_security+0x15/0x20 security/selinux/hooks.c:5023
security_tun_dev_free_security+0x48/0x80 security/security.c:1512
tun_free_netdev+0x13b/0x1b0 drivers/net/tun.c:1563
register_netdevice+0x8d0/0xee0 net/core/dev.c:7605
tun_set_iff drivers/net/tun.c:1859 [inline]
__tun_chr_ioctl+0x1caf/0x3d50 drivers/net/tun.c:2064
tun_chr_ioctl+0x2a/0x40 drivers/net/tun.c:2309
vfs_ioctl fs/ioctl.c:45 [inline]
do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685
SYSC_ioctl fs/ioctl.c:700 [inline]
SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691
entry_SYSCALL_64_fastpath+0x1f/0xbe
The buggy address belongs to the object at ffff8801d2843b40
which belongs to the cache kmalloc-32 of size 32
The buggy address is located 0 bytes inside of
32-byte region [ffff8801d2843b40, ffff8801d2843b60)
The buggy address belongs to the page:
page:ffffea000660cea8 count:1 mapcount:0 mapping:ffff8801d2843000 index:0xffff8801d2843fc1
flags: 0x200000000000100(slab)
raw: 0200000000000100 ffff8801d2843000 ffff8801d2843fc1 000000010000003f
raw: ffffea0006626a40 ffffea00066141a0 ffff8801dbc00100
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8801d2843a00: fb fb fb fb fc fc fc fc fb fb fb fb fc fc fc fc
ffff8801d2843a80: 00 00 00 fc fc fc fc fc fb fb fb fb fc fc fc fc
>ffff8801d2843b00: 00 00 00 00 fc fc fc fc fb fb fb fb fc fc fc fc
^
ffff8801d2843b80: fb fb fb fb fc fc fc fc fb fb fb fb fc fc fc fc
ffff8801d2843c00: fb fb fb fb fc fc fc fc fb fb fb fb fc fc fc fc
==================================================================
Fixes: cf124db566 ("net: Fix inconsistent teardown and release of private netdev state.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Moving the x86_64 and arm64 PIE base from 0x555555554000 to 0x000100000000
broke AddressSanitizer. This is a partial revert of:
eab09532d4 ("binfmt_elf: use ELF_ET_DYN_BASE only for PIE")
02445990a9 ("arm64: move ELF_ET_DYN_BASE to 4GB / 4MB")
The AddressSanitizer tool has hard-coded expectations about where
executable mappings are loaded.
The motivation for changing the PIE base in the above commits was to
avoid the Stack-Clash CVEs that allowed executable mappings to get too
close to heap and stack. This was mainly a problem on 32-bit, but the
64-bit bases were moved too, in an effort to proactively protect those
systems (proofs of concept do exist that show 64-bit collisions, but
other recent changes to fix stack accounting and setuid behaviors will
minimize the impact).
The new 32-bit PIE base is fine for ASan (since it matches the ET_EXEC
base), so only the 64-bit PIE base needs to be reverted to let x86 and
arm64 ASan binaries run again. Future changes to the 64-bit PIE base on
these architectures can be made optional once a more dynamic method for
dealing with AddressSanitizer is found. (e.g. always loading PIE into
the mmap region for marked binaries.)
Link: http://lkml.kernel.org/r/20170807201542.GA21271@beast
Fixes: eab09532d4 ("binfmt_elf: use ELF_ET_DYN_BASE only for PIE")
Fixes: 02445990a9 ("arm64: move ELF_ET_DYN_BASE to 4GB / 4MB")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Kostya Serebryany <kcc@google.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 19809c2da2 ("mm, vmalloc: use __GFP_HIGHMEM implicitly") added
use of __GFP_HIGHMEM for allocations. vmalloc_32 may use
GFP_DMA/GFP_DMA32 which does not play nice with __GFP_HIGHMEM and will
trigger a BUG in gfp_zone.
Only add __GFP_HIGHMEM if we aren't using GFP_DMA/GFP_DMA32.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1482249
Link: http://lkml.kernel.org/r/20170816220705.31374-1-labbott@redhat.com
Fixes: 19809c2da2 ("mm, vmalloc: use __GFP_HIGHMEM implicitly")
Signed-off-by: Laura Abbott <labbott@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I hit a use after free issue when executing trinity and repoduced it
with KASAN enabled. The related call trace is as follows.
BUG: KASan: use after free in SyS_get_mempolicy+0x3c8/0x960 at addr ffff8801f582d766
Read of size 2 by task syz-executor1/798
INFO: Allocated in mpol_new.part.2+0x74/0x160 age=3 cpu=1 pid=799
__slab_alloc+0x768/0x970
kmem_cache_alloc+0x2e7/0x450
mpol_new.part.2+0x74/0x160
mpol_new+0x66/0x80
SyS_mbind+0x267/0x9f0
system_call_fastpath+0x16/0x1b
INFO: Freed in __mpol_put+0x2b/0x40 age=4 cpu=1 pid=799
__slab_free+0x495/0x8e0
kmem_cache_free+0x2f3/0x4c0
__mpol_put+0x2b/0x40
SyS_mbind+0x383/0x9f0
system_call_fastpath+0x16/0x1b
INFO: Slab 0xffffea0009cb8dc0 objects=23 used=8 fp=0xffff8801f582de40 flags=0x200000000004080
INFO: Object 0xffff8801f582d760 @offset=5984 fp=0xffff8801f582d600
Bytes b4 ffff8801f582d750: ae 01 ff ff 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ
Object ffff8801f582d760: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
Object ffff8801f582d770: 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkk.
Redzone ffff8801f582d778: bb bb bb bb bb bb bb bb ........
Padding ffff8801f582d8b8: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ
Memory state around the buggy address:
ffff8801f582d600: fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8801f582d680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff8801f582d700: fc fc fc fc fc fc fc fc fc fc fc fc fb fb fb fc
!shared memory policy is not protected against parallel removal by other
thread which is normally protected by the mmap_sem. do_get_mempolicy,
however, drops the lock midway while we can still access it later.
Early premature up_read is a historical artifact from times when
put_user was called in this path see https://lwn.net/Articles/124754/
but that is gone since 8bccd85ffb ("[PATCH] Implement sys_* do_*
layering in the memory policy layer."). but when we have the the
current mempolicy ref count model. The issue was introduced
accordingly.
Fix the issue by removing the premature release.
Link: http://lkml.kernel.org/r/1502950924-27521-1-git-send-email-zhongjiang@huawei.com
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org> [2.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
name[] in cma_debugfs_add_one() can only accommodate 16 chars including
NULL to store sprintf output. It's common for cma device name to be
larger than 15 chars. This can cause stack corrpution. If the gcc
stack protector is turned on, this can cause a panic due to stack
corruption.
Below is one example trace:
Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in:
ffffff8e69a75730
Call trace:
dump_backtrace+0x0/0x2c4
show_stack+0x20/0x28
dump_stack+0xb8/0xf4
panic+0x154/0x2b0
print_tainted+0x0/0xc0
cma_debugfs_init+0x274/0x290
do_one_initcall+0x5c/0x168
kernel_init_freeable+0x1c8/0x280
Fix the short sprintf buffer in cma_debugfs_add_one() by using
scnprintf() instead of sprintf().
Link: http://lkml.kernel.org/r/1502446217-21840-1-git-send-email-guptap@codeaurora.org
Fixes: f318dd083c ("cma: Store a name in the cma structure")
Signed-off-by: Prakash Gupta <guptap@codeaurora.org>
Acked-by: Laura Abbott <labbott@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When forcing a signal, SIGNAL_UNKILLABLE is removed to prevent recursive
faults, but this is undesirable when tracing. For example, debugging an
init process (whether global or namespace), hitting a breakpoint and
SIGTRAP will force SIGTRAP and then remove SIGNAL_UNKILLABLE.
Everything continues fine, but then once debugging has finished, the
init process is left killable which is unlikely what the user expects,
resulting in either an accidentally killed init or an init that stops
reaping zombies.
Link: http://lkml.kernel.org/r/20170815112806.10728-1-jamie.iles@oracle.com
Signed-off-by: Jamie Iles <jamie.iles@oracle.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wenwei Tao has noticed that our current assumption that the oom victim
is dying and never doing any visible changes after it dies, and so the
oom_reaper can tear it down, is not entirely true.
__task_will_free_mem consider a task dying when SIGNAL_GROUP_EXIT is set
but do_group_exit sends SIGKILL to all threads _after_ the flag is set.
So there is a race window when some threads won't have
fatal_signal_pending while the oom_reaper could start unmapping the
address space. Moreover some paths might not check for fatal signals
before each PF/g-u-p/copy_from_user.
We already have a protection for oom_reaper vs. PF races by checking
MMF_UNSTABLE. This has been, however, checked only for kernel threads
(use_mm users) which can outlive the oom victim. A simple fix would be
to extend the current check in handle_mm_fault for all tasks but that
wouldn't be sufficient because the current check assumes that a kernel
thread would bail out after EFAULT from get_user*/copy_from_user and
never re-read the same address which would succeed because the PF path
has established page tables already. This seems to be the case for the
only existing use_mm user currently (virtio driver) but it is rather
fragile in general.
This is even more fragile in general for more complex paths such as
generic_perform_write which can re-read the same address more times
(e.g. iov_iter_copy_from_user_atomic to fail and then
iov_iter_fault_in_readable on retry).
Therefore we have to implement MMF_UNSTABLE protection in a robust way
and never make a potentially corrupted content visible. That requires
to hook deeper into the PF path and check for the flag _every time_
before a pte for anonymous memory is established (that means all
!VM_SHARED mappings).
The corruption can be triggered artificially
(http://lkml.kernel.org/r/201708040646.v746kkhC024636@www262.sakura.ne.jp)
but there doesn't seem to be any real life bug report. The race window
should be quite tight to trigger most of the time.
Link: http://lkml.kernel.org/r/20170807113839.16695-3-mhocko@kernel.org
Fixes: aac4536355 ("mm, oom: introduce oom reaper")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Wenwei Tao <wenwei.tww@alibaba-inc.com>
Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Andrea Argangeli <andrea@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tetsuo Handa has noticed that MMF_UNSTABLE SIGBUS path in
handle_mm_fault causes a lockdep splat
Out of memory: Kill process 1056 (a.out) score 603 or sacrifice child
Killed process 1056 (a.out) total-vm:4268108kB, anon-rss:2246048kB, file-rss:0kB, shmem-rss:0kB
a.out (1169) used greatest stack depth: 11664 bytes left
DEBUG_LOCKS_WARN_ON(depth <= 0)
------------[ cut here ]------------
WARNING: CPU: 6 PID: 1339 at kernel/locking/lockdep.c:3617 lock_release+0x172/0x1e0
CPU: 6 PID: 1339 Comm: a.out Not tainted 4.13.0-rc3-next-20170803+ #142
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/02/2015
RIP: 0010:lock_release+0x172/0x1e0
Call Trace:
up_read+0x1a/0x40
__do_page_fault+0x28e/0x4c0
do_page_fault+0x30/0x80
page_fault+0x28/0x30
The reason is that the page fault path might have dropped the mmap_sem
and returned with VM_FAULT_RETRY. MMF_UNSTABLE check however rewrites
the error path to VM_FAULT_SIGBUS and we always expect mmap_sem taken in
that path. Fix this by taking mmap_sem when VM_FAULT_RETRY is held in
the MMF_UNSTABLE path.
We cannot simply add VM_FAULT_SIGBUS to the existing error code because
all arch specific page fault handlers and g-u-p would have to learn a
new error code combination.
Link: http://lkml.kernel.org/r/20170807113839.16695-2-mhocko@kernel.org
Fixes: 3f70dc38ce ("mm: make sure that kthreads will not refault oom reaped memory")
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Andrea Argangeli <andrea@kernel.org>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Wenwei Tao <wenwei.tww@alibaba-inc.com>
Cc: <stable@vger.kernel.org> [4.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To avoid a possible deadlock, sysfs_slab_remove() schedules an
asynchronous work to delete sysfs entries corresponding to the kmem
cache. To ensure the cache isn't freed before the work function is
called, it takes a reference to the cache kobject. The reference is
supposed to be released by the work function.
However, the work function (sysfs_slab_remove_workfn()) does nothing in
case the cache sysfs entry has already been deleted, leaking the kobject
and the corresponding cache.
This may happen on a per memcg cache destruction, because sysfs entries
of a per memcg cache are deleted on memcg offline if the cache is empty
(see __kmemcg_cache_deactivate()).
The kmemleak report looks like this:
unreferenced object 0xffff9f798a79f540 (size 32):
comm "kworker/1:4", pid 15416, jiffies 4307432429 (age 28687.554s)
hex dump (first 32 bytes):
6b 6d 61 6c 6c 6f 63 2d 31 36 28 31 35 39 39 3a kmalloc-16(1599:
6e 65 77 72 6f 6f 74 29 00 23 6b c0 ff ff ff ff newroot).#k.....
backtrace:
kmemleak_alloc+0x4a/0xa0
__kmalloc_track_caller+0x148/0x2c0
kvasprintf+0x66/0xd0
kasprintf+0x49/0x70
memcg_create_kmem_cache+0xe6/0x160
memcg_kmem_cache_create_func+0x20/0x110
process_one_work+0x205/0x5d0
worker_thread+0x4e/0x3a0
kthread+0x109/0x140
ret_from_fork+0x2a/0x40
unreferenced object 0xffff9f79b6136840 (size 416):
comm "kworker/1:4", pid 15416, jiffies 4307432429 (age 28687.573s)
hex dump (first 32 bytes):
40 fb 80 c2 3e 33 00 00 00 00 00 40 00 00 00 00 @...>3.....@....
00 00 00 00 00 00 00 00 10 00 00 00 10 00 00 00 ................
backtrace:
kmemleak_alloc+0x4a/0xa0
kmem_cache_alloc+0x128/0x280
create_cache+0x3b/0x1e0
memcg_create_kmem_cache+0x118/0x160
memcg_kmem_cache_create_func+0x20/0x110
process_one_work+0x205/0x5d0
worker_thread+0x4e/0x3a0
kthread+0x109/0x140
ret_from_fork+0x2a/0x40
Fix the leak by adding the missing call to kobject_put() to
sysfs_slab_remove_workfn().
Link: http://lkml.kernel.org/r/20170812181134.25027-1-vdavydov.dev@gmail.com
Fixes: 3b7b314053 ("slub: make sysfs file removal asynchronous")
Signed-off-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Reported-by: Andrei Vagin <avagin@gmail.com>
Tested-by: Andrei Vagin <avagin@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <stable@vger.kernel.org> [4.12.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is existing use after free bug when deferred struct pages are
enabled:
The memblock_add() allocates memory for the memory array if more than
128 entries are needed. See comment in e820__memblock_setup():
* The bootstrap memblock region count maximum is 128 entries
* (INIT_MEMBLOCK_REGIONS), but EFI might pass us more E820 entries
* than that - so allow memblock resizing.
This memblock memory is freed here:
free_low_memory_core_early()
We access the freed memblock.memory later in boot when deferred pages
are initialized in this path:
deferred_init_memmap()
for_each_mem_pfn_range()
__next_mem_pfn_range()
type = &memblock.memory;
One possible explanation for why this use-after-free hasn't been hit
before is that the limit of INIT_MEMBLOCK_REGIONS has never been
exceeded at least on systems where deferred struct pages were enabled.
Tested by reducing INIT_MEMBLOCK_REGIONS down to 4 from the current 128,
and verifying in qemu that this code is getting excuted and that the
freed pages are sane.
Link: http://lkml.kernel.org/r/1502485554-318703-2-git-send-email-pasha.tatashin@oracle.com
Fixes: 7e18adb4f8 ("mm: meminit: initialise remaining struct pages in parallel with kswapd")
Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Reviewed-by: Steven Sistare <steven.sistare@oracle.com>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The descriptions were reversed, correct this.
Link: http://lkml.kernel.org/r/20170809234635.13443-4-mcgrof@kernel.org
Fixes: 64b671204a ("test_sysctl: add generic script to expand on tests")
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Reported-by: Daniel Mentz <danielmentz@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Binderman <dcb314@hotmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jessica Yu <jeyu@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matt Redfearn <matt.redfearn@imgetc.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Michal Marek <mmarek@suse.com>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Recursive loops with module loading were previously handled in kmod by
restricting the number of modprobe calls to 50 and if that limit was
breached request_module() would return an error and a user would see the
following on their kernel dmesg:
request_module: runaway loop modprobe binfmt-464c
Starting init:/sbin/init exists but couldn't execute it (error -8)
This issue could happen for instance when a 64-bit kernel boots a 32-bit
userspace on some architectures and has no 32-bit binary format
hanlders. This is visible, for instance, when a CONFIG_MODULES enabled
64-bit MIPS kernel boots a into o32 root filesystem and the binfmt
handler for o32 binaries is not built-in.
After commit 6d7964a722 ("kmod: throttle kmod thread limit") we now
don't have any visible signs of an error and the kernel just waits for
the loop to end somehow.
Although this *particular* recursive loop could also be addressed by
doing a sanity check on search_binary_handler() and disallowing a
modular binfmt to be required for modprobe, a generic solution for any
recursive kernel kmod issues is still needed.
This should catch these loops. We can investigate each loop and address
each one separately as they come in, this however puts a stop gap for
them as before.
Link: http://lkml.kernel.org/r/20170809234635.13443-3-mcgrof@kernel.org
Fixes: 6d7964a722 ("kmod: throttle kmod thread limit")
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Reported-by: Matt Redfearn <matt.redfearn@imgtec.com>
Tested-by: Matt Redfearn <matt.redfearn@imgetc.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Daniel Mentz <danielmentz@google.com>
Cc: David Binderman <dcb314@hotmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jessica Yu <jeyu@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michal Marek <mmarek@suse.com>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These are the few pending fixes I have queued up for v4.13-final. One
is a a generic regression fix for recursive loops on kmod and the other
one is a trivial print out correction.
During the v4.13 development we assumed that recursive kmod loops were
no longer possible. Clearly that is not true. The regression fix makes
use of a new killable wait. We use a killable wait to be paranoid in
how signals might be sent to modprobe and only accept a proper SIGKILL.
The signal will only be available to userspace to issue *iff* a thread
has already entered a wait state, and that happens only if we've already
throttled after 50 kmod threads have been hit.
Note that although it may seem excessive to trigger a failure afer 5
seconds if all kmod thread remain busy, prior to the series of changes
that went into v4.13 we would actually *always* fatally fail any request
which came in if the limit was already reached. The new waiting
implemented in v4.13 actually gives us *more* breathing room -- the wait
for 5 seconds is a wait for *any* kmod thread to finish. We give up and
fail *iff* no kmod thread has finished and they're *all* running
straight for 5 consecutive seconds. If 50 kmod threads are running
consecutively for 5 seconds something else must be really bad.
Recursive loops with kmod are bad but they're also hard to implement
properly as a selftest without currently fooling current userspace tools
like kmod [1]. For instance kmod will complain when you run depmod if
it finds a recursive loop with symbol dependency between modules as such
this type of recursive loop cannot go upstream as the modules_install
target will fail after running depmod.
These tests already exist on userspace kmod upstream though (refer to
the testsuite/module-playground/mod-loop-*.c files). The same is not
true if request_module() is used though, or worst if aliases are used.
Likewise the issue with 64-bit kernels booting 32-bit userspace without
a binfmt handler built-in is also currently not detected and proactively
avoided by userspace kmod tools, or kconfig for all architectures.
Although we could complain in the kernel when some of these individual
recursive issues creep up, proactively avoiding these situations in
userspace at build time is what we should keep striving for.
Lastly, since recursive loops could happen with kmod it may mean
recursive loops may also be possible with other kernel usermode helpers,
this should be investigated and long term if we can come up with a more
sensible generic solution even better!
[0] https://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux.git/log/?h=20170809-kmod-for-v4.13-final
[1] https://git.kernel.org/pub/scm/utils/kernel/kmod/kmod.git
This patch (of 3):
This wait is similar to wait_event_interruptible_timeout() but only
accepts SIGKILL interrupt signal. Other signals are ignored.
Link: http://lkml.kernel.org/r/20170809234635.13443-2-mcgrof@kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Jessica Yu <jeyu@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Michal Marek <mmarek@suse.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Daniel Mentz <danielmentz@google.com>
Cc: David Binderman <dcb314@hotmail.com>
Cc: Matt Redfearn <matt.redfearn@imgetc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 05a4a95279 ("kernel/watchdog: split up config options") lost
the perf-based hardlockup detector's dependency on PERF_EVENTS, which
can result in broken builds with some powerpc configurations.
Restore the dependency. Add it in for x86 too, despite x86 always
selecting PERF_EVENTS it seems reasonable to make the dependency
explicit.
Link: http://lkml.kernel.org/r/20170810114452.6673-1-npiggin@gmail.com
Fixes: 05a4a95279 ("kernel/watchdog: split up config options")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jaegeuk and Brad report a NULL pointer crash when writeback ending tries
to update the memcg stats:
BUG: unable to handle kernel NULL pointer dereference at 00000000000003b0
IP: test_clear_page_writeback+0x12e/0x2c0
[...]
RIP: 0010:test_clear_page_writeback+0x12e/0x2c0
Call Trace:
<IRQ>
end_page_writeback+0x47/0x70
f2fs_write_end_io+0x76/0x180 [f2fs]
bio_endio+0x9f/0x120
blk_update_request+0xa8/0x2f0
scsi_end_request+0x39/0x1d0
scsi_io_completion+0x211/0x690
scsi_finish_command+0xd9/0x120
scsi_softirq_done+0x127/0x150
__blk_mq_complete_request_remote+0x13/0x20
flush_smp_call_function_queue+0x56/0x110
generic_smp_call_function_single_interrupt+0x13/0x30
smp_call_function_single_interrupt+0x27/0x40
call_function_single_interrupt+0x89/0x90
RIP: 0010:native_safe_halt+0x6/0x10
(gdb) l *(test_clear_page_writeback+0x12e)
0xffffffff811bae3e is in test_clear_page_writeback (./include/linux/memcontrol.h:619).
614 mod_node_page_state(page_pgdat(page), idx, val);
615 if (mem_cgroup_disabled() || !page->mem_cgroup)
616 return;
617 mod_memcg_state(page->mem_cgroup, idx, val);
618 pn = page->mem_cgroup->nodeinfo[page_to_nid(page)];
619 this_cpu_add(pn->lruvec_stat->count[idx], val);
620 }
621
622 unsigned long mem_cgroup_soft_limit_reclaim(pg_data_t *pgdat, int order,
623 gfp_t gfp_mask,
The issue is that writeback doesn't hold a page reference and the page
might get freed after PG_writeback is cleared (and the mapping is
unlocked) in test_clear_page_writeback(). The stat functions looking up
the page's node or zone are safe, as those attributes are static across
allocation and free cycles. But page->mem_cgroup is not, and it will
get cleared if we race with truncation or migration.
It appears this race window has been around for a while, but less likely
to trigger when the memcg stats were updated first thing after
PG_writeback is cleared. Recent changes reshuffled this code to update
the global node stats before the memcg ones, though, stretching the race
window out to an extent where people can reproduce the problem.
Update test_clear_page_writeback() to look up and pin page->mem_cgroup
before clearing PG_writeback, then not use that pointer afterward. It
is a partial revert of 62cccb8c8e ("mm: simplify lock_page_memcg()")
but leaves the pageref-holding callsites that aren't affected alone.
Link: http://lkml.kernel.org/r/20170809183825.GA26387@cmpxchg.org
Fixes: 62cccb8c8e ("mm: simplify lock_page_memcg()")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Jaegeuk Kim <jaegeuk@kernel.org>
Tested-by: Jaegeuk Kim <jaegeuk@kernel.org>
Reported-by: Bradley Bolen <bradleybolen@gmail.com>
Tested-by: Brad Bolen <bradleybolen@gmail.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: <stable@vger.kernel.org> [4.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix Smatch error by not dereferencing iq pointer if it's NULL.
See http://marc.info/?l=kernel-janitors&m=150296723301129&w=2
Also, remove unnecessary parentheses.
Fixes: d314ac2228 ("liquidio: moved liquidio_napi_poll to lio_core.c")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Due to commit e6afc8ace6 ("udp: remove
headers from UDP packets before queueing"), when udp packets are being
peeked the requested extra offset is always 0 as there is no need to skip
the udp header. However, when the offset is 0 and the next skb is
of length 0, it is only returned once. The behaviour can be seen with
the following python script:
from socket import *;
f=socket(AF_INET6, SOCK_DGRAM | SOCK_NONBLOCK, 0);
g=socket(AF_INET6, SOCK_DGRAM | SOCK_NONBLOCK, 0);
f.bind(('::', 0));
addr=('::1', f.getsockname()[1]);
g.sendto(b'', addr)
g.sendto(b'b', addr)
print(f.recvfrom(10, MSG_PEEK));
print(f.recvfrom(10, MSG_PEEK));
Where the expected output should be the empty string twice.
Instead, make sk_peek_offset return negative values, and pass those values
to __skb_try_recv_datagram/__skb_try_recv_from_queue. If the passed offset
to __skb_try_recv_from_queue is negative, the checked skb is never skipped.
__skb_try_recv_from_queue will then ensure the offset is reset back to 0
if a peek is requested without an offset, unless no packets are found.
Also simplify the if condition in __skb_try_recv_from_queue. If _off is
greater then 0, and off is greater then or equal to skb->len, then
(_off || skb->len) must always be true assuming skb->len >= 0 is always
true.
Also remove a redundant check around a call to sk_peek_offset in af_unix.c,
as it double checked if MSG_PEEK was set in the flags.
V2:
- Moved the negative fixup into __skb_try_recv_from_queue, and remove now
redundant checks
- Fix peeking in udp{,v6}_recvmsg to report the right value when the
offset is 0
V3:
- Marked new branch in __skb_try_recv_from_queue as unlikely.
Signed-off-by: Matthew Dawson <matthew@mjdsystems.ca>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Don't leak resources when mount fails
- Don't accidentally clobber variables when looking for free inodes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=vJe/
-----END PGP SIGNATURE-----
Merge tag 'xfs-4.13-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"A handful more bug fixes for you today.
Changes since last time:
- Don't leak resources when mount fails
- Don't accidentally clobber variables when looking for free inodes"
* tag 'xfs-4.13-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: don't leak quotacheck dquots when cow recovery
xfs: clear MS_ACTIVE after finishing log recovery
iomap: fix integer truncation issues in the zeroing and dirtying helpers
xfs: fix inobt inode allocation search optimization
Pull block fixes from Jens Axboe:
"A small set of fixes that should go into this release. This contains:
- An NVMe pull request from Christoph, with a few select fixes.
One of them fix a polling regression in this series, in which it's
trivial to cause the kernel to disable most of the hardware queue
interrupts.
- Fixup for a blk-mq queue usage imbalance on request allocation,
from Keith.
- A xen block pull request from Konrad, fixing two issues with
xen/xen-blkfront"
* 'for-linus' of git://git.kernel.dk/linux-block:
blk-mq-pci: add a fallback when pci_irq_get_affinity returns NULL
nvme-pci: set cqe_seen on polled completions
nvme-fabrics: fix reporting of unrecognized options
nvmet-fc: eliminate incorrect static markers on local variables
nvmet-fc: correct use after free on list teardown
nvmet: don't overwrite identify sn/fr with 0-bytes
xen-blkfront: use a right index when checking requests
xen: fix bio vec merging
blk-mq: Fix queue usage on failed request allocation
- Set of 5 i40iw fixes (the first of these is rather large by line
count consideration, but I decided to send it because if fixes a
legitimate issue and the line count is because it does so by creating
a new function and using it where needed instead of just patching up a
few lines...a smaller fix could probably be done, but the larger fix
is the better code solution)
- One vmw_pvrdma fix
- One hns_roce fix (this silences a checker warning, but can't actually
happen, I expect a patch to remove this from all drivers that share
this same check in for-next)
- One iw_cxgb4 fix
- Two IB core fixes
-----BEGIN PGP SIGNATURE-----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=84Ve
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
"Fourth set of -rc fixes for 4.13 cycle. This is all of the -rc fixes
that we know of. I suspect this will be the last rc pull request, but
you never know, I could be wrong.
Nothing major here. There are the i40iw patches I mentioned in my last
pull request minus one that I pulled out because it wasn't a fix and
not appropriate for the rc cycle. Then a few other items trickled in
and were added to the pull request. It's fairly small aside from those
five i40iw patches
- Set of five i40iw fixes (the first of these is rather large by line
count consideration, but I decided to send it because if fixes a
legitimate issue and the line count is because it does so by
creating a new function and using it where needed instead of just
patching up a few lines...a smaller fix could probably be done, but
the larger fix is the better code solution)
- One vmw_pvrdma fix
- One hns_roce fix (this silences a checker warning, but can't
actually happen, I expect a patch to remove this from all drivers
that share this same check in for-next)
- One iw_cxgb4 fix
- Two IB core fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
IB/uverbs: Fix NULL pointer dereference during device removal
IB/core: Protect sysfs entry on ib_unregister_device
iw_cxgb4: fix misuse of integer variable
IB/hns: fix memory leak on ah on error return path
i40iw: Fix potential fcn_id_array out of bounds
i40iw: Use correct alignment for CQ0 memory
i40iw: Fix typecast of tcp_seq_num
i40iw: Correct variable names
i40iw: Fix parsing of query/commit FPM buffers
RDMA/vmw_pvrdma: Report CQ missed events
A bug in the VSX register saving that could cause userspace FP/VMX register
corruption. Never seen to happen (that we know of), was found by code
inspection, but still tagged for stable given the consequences.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=jIDJ
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.13-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"A bug in the VSX register saving that could cause userspace FP/VMX
register corruption.
Never seen to happen (that we know of), was found by code inspection,
but still tagged for stable given the consequences"
* tag 'powerpc-4.13-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Fix VSX enabling/flushing to also test MSR_FP and MSR_VEC
Lendacky, Thomas