Commit Graph

1056 Commits

Author SHA1 Message Date
Ville Syrjälä 1eb83451ba drm: Pass the user drm_mode_fb_cmd2 as const to .fb_create()
Drivers shouldn't clobber the passed in addfb ioctl parameters.
i915 was doing just that. To prevent it from happening again,
pass the struct around as const, starting all the way from
internal_framebuffer_create().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-11-24 11:47:38 +01:00
Marek Szyprowski df547bf773 drm/exynos/gem: remove DMA-mapping hacks used for constructing page array
Exynos GEM objects contains an array of pointers to the pages, which the
allocated buffer consists of. Till now the code used some hacks (like
relying on DMA-mapping internal structures or using ARM-specific
dma_to_pfn helper) to build this array. This patch fixes this by adding
proper call to dma_get_sgtable_attrs() and using the acquired scatter-list
to construct needed array. This approach is more portable (work also for
ARM64) and finally fixes the layering violation that was present in this
code.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-11-03 11:46:39 +09:00
Andrzej Hajda 5a3c35b377 drm/exynos: simplify Kconfig component names
Many Exynos DRM sub-options mentions Exynos DRM in their titles.
It is redundant and can be safely shortened. The patch additionally
makes some entries more descriptive.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-11-03 11:46:38 +09:00
Andrzej Hajda ea9776465d drm/exynos: re-arrange Kconfig entries
Exynos DRM driver have quite big number of components and options.
The patch re-arranges them into three logical groups:
- CRTCs,
- Encoders and Bridges,
- Sub-drivers.
It should make driver options more clear.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-11-03 11:46:38 +09:00
Andrzej Hajda dba6c5280d drm/exynos: abstract out common dependency
All options depends on DRM_EXYNOS so it can be moved to enclosing if clause.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-11-03 11:46:38 +09:00
Andrzej Hajda 3cb02b4a9e drm/exynos: separate Mixer and HDMI drivers
Latest Exynos SoCs does not have Mixer IP, but they still have HDMI IP.
Their drivers should be configurable separately.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-11-03 11:46:38 +09:00
Andrzej Hajda 3ae24362e0 drm/exynos/mixer: replace direct cross-driver call with drm mode validation
HDMI driver called directly function from MIXER driver to invalidate modes
not supported by MIXER. The patch replaces the hack with proper .atomic_check
callback.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-11-03 11:46:38 +09:00
Andrzej Hajda 5625b3418a drm/exynos: add atomic_check callback to exynos_crtc
Some CRTCs needs mode validation, this patch adds neccessary
callback to Exynos DRM framework. It is called from DRM core
via atomic_check helper for drm_crtc.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-11-03 11:46:37 +09:00
Andrzej Hajda b8182832c5 drm/exynos/decon5433: add support for DECON-TV
DECON-TV IP is responsible for generating video stream which is transferred
to HDMI IP. It is almost fully compatible with DECON IP.

The patch is based on initial work of Hyungwon Hwang.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-11-03 11:46:37 +09:00
Andrzej Hajda 5d929ba50a drm/exynos/decon5433: remove duplicated initialization
Field .commit is already initialized few lines above.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-11-03 11:46:37 +09:00
Andrzej Hajda 7b6bb6ed01 drm/exynos/decon5433: merge different flag fields
Driver uses four different fields for internal flags. They can be merged
into one.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-11-03 11:46:37 +09:00
Andrzej Hajda b219207385 drm/exynos/decon5433: add function to set particular register bits
The driver often sets only particular bits of configuration registers.
Using separate function to such action simplifies the code.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-11-03 11:46:37 +09:00
Andrzej Hajda 85de275ad9 drm/exynos/decon5433: fix timing registers writes
All timing registers should contain values decreased by one.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-11-03 11:46:36 +09:00
Andrzej Hajda 4f54f21cd6 drm/exynos/decon5433: add PCLK clock
PCLK clock is used by DECON IP. The patch also replaces magic number with
number of clocks in array definition.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-11-03 11:46:36 +09:00
Joonyoung Shim 813fd67b57 drm/exynos: cleanup name of gem object for exynos_drm
Struct of gem object in exynos_drm driver is struct exynos_drm_gem_obj.
It's too long and we can know its meaning of name without _obj postfix.

We use several names to variable name of gem object for exynos_drm -
exynos_gem_obj, gem_obj and obj. Especially "obj" name can cause
misunderstanding with variable name "obj" of struct drm_gem_object.

This will clean about name of gem object for exynos_drm as follows.
s/struct exynos_drm_gem_obj/struct exynos_drm_gem
s/exynos_gem_obj or gem_obj or obj/exynos_gem

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-10-26 15:10:34 +09:00
Joonyoung Shim 4d91a85598 drm/exynos: fix to detach device of iommu
The arm_iommu_detach_device() is a function to detach device of iommu
attached by arm_iommu_attach_device(). The exynos-drm uses
arm_iommu_attach_device() so it should use arm_iommu_detach_device() to
detach device of iommu, not iommu_detach_device().

The drm_release_iommu_mapping() is a function to release mapping of
iommu created by arm_iommu_create_mapping(). It is called by
exynos_drm_unload() so shouldn't be called by drm_iommu_detach_device().

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-10-26 15:10:30 +09:00
Gustavo Padovan 323db0ed7d drm/exynos: add cursor plane support
Set one of the planes for each crtc driver as a cursor plane enabled
window managers to fully work on exynos.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-10-26 15:10:27 +09:00
Gustavo Padovan 5d3d099574 drm/exynos: add global macro for the default primary plane
Define DEFAULT_WIN as zero to help set the primary plane on all CRTCs.
Some CRTCs were defining a variable to store the default window, but that
is not necessary as the default (primary) window is always the window zero.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-10-26 15:10:24 +09:00
Ingi Kim c691349ca4 drm/exynos: fix spelling errors
This patch fixes spelling errors in drm fimc/gsc
inavild -> invaild

Signed-off-by: Ingi Kim <ingi2.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-10-26 15:10:17 +09:00
Tomasz Stanislawski 02b3de4311 drm: exynos: mixer: fix using usleep() in atomic context
This patch fixes calling usleep_range() after taking reg_slock
using spin_lock_irqsave(). The mdelay() is used instead.
Waiting in atomic context is not the best idea in general.
Hopefully, waiting occurs only when Video Processor fails
to reset correctly.

Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-10-26 15:10:12 +09:00
Andrzej Hajda cf3e0fdd54 drm/exynos/hdmi: remove unused field
The patch removes unused hdmi_context field.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-10-26 15:10:08 +09:00
Andrzej Hajda d24bb3e59d drm/exynos/hdmi: improve HDMI/ACR related code
Simple formula can be used to calculate CTS and N coefficients.
Additionaly ACR registers have different offsets for different versions
of IP.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-10-26 15:10:04 +09:00
Andrzej Hajda 185f22d222 drm/exynos/hdmi: convert container_of macro to inline function
Inline function is safer than macro, also the name has been changed to
be consistent with other inline function encoder_to_hdmi.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-10-26 15:10:01 +09:00
Andrzej Hajda af1f7c24d6 drm/exynos/hdmi: remove deprecated hdmi_resources structure
hdmi_resources structure was filled by old platform data code and is not
necessary anymore. The patch removes it at groups together resource related
fields in hdmi_context.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-10-26 15:09:59 +09:00
Andrzej Hajda 2228b7cda2 drm/exynos/hdmi: convert to gpiod API
The patch converts API to gpiod and moves initialization code
to hdmi_resources_init.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-10-26 15:09:55 +09:00
Andrzej Hajda da5e36ae96 drm/exynos/hdmi: simplify clock re-parenting
Driver tries to disable sclk_hdmi during re-parenting, to avoid possible
glitches. It is ineffective as the clock is used also by other devices (mixer).
Anyway driver works without disabling sclk_hdmi.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-10-26 15:09:52 +09:00
Andrzej Hajda 1ab739db8e drm/exynos/hdmi: use constant size array for regulators
Driver always uses the same number of regulators, so there is no point in
dynamic allocation.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-10-26 15:09:48 +09:00
Andrzej Hajda 498d5a373a drm/exynos/hdmi: use optional regulator_get for hdmi-en
hdmi-en is an optional regulator so it should be better handled by
devm_regulator_get_optional call.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-10-26 15:09:43 +09:00
Andrzej Hajda 2445c4a44f drm/exynos/hdmi: fix removal order
DRM device should be destroyed before releasing resources.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-10-26 15:09:40 +09:00
Andrzej Hajda 1993c33942 drm/exynos/hdmi: replace all writeb with writel
Registers are 32-bit, even if only lower 8-bits are used.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-10-26 15:09:38 +09:00
Andrzej Hajda 74a74ff4e6 drm/exynos/hdmi: simplify HDMI-PHY power sequence
Currently driver tries to set specific HDMI-PHY registers in three situations:
- before reset,
- before power off,
- after applying HDMI-PHY configuration.

First two cases seems to be unnecessary - register contents will be lost
anyway. The third case can be merged with HDMI-PHY configuration by fixing
the last byte of configuration data.

The patch has been tested with following platforms:
- exynos4210-universal_c210,
- exynos4412-odroidu3,
- exynos5422-odroidxu3.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-10-26 15:09:35 +09:00
Andrzej Hajda 8eb6d4ec99 drm/exynos/hdmi: move PLL stabilization check code to separate function
The patch moves PLL stabilization check to separate function, adjust timeout
parameters and de-duplicates code common for both HW variants.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-10-26 15:09:30 +09:00
Andrzej Hajda 633d00b327 drm/exynos/hdmi: use mappings for registers with IP dependent address
Some registers resides at different offsets depending on device version.
This patch adds infrastructure for mapping such registers to proper address
based on hdmi_type. It adds also mappings to some registers.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-10-26 15:09:27 +09:00
Andrzej Hajda e68d547b8a drm/exynos/hdmi: remove support for deprecated compatible
This compatible was marked as deprecated in Jun 2013 and it is not used since
then. Additionally its driver data points to wrong pll settings, so it
cannot work anyway.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-10-26 15:09:24 +09:00
Dave Airlie affa0e033b Merge tag 'topic/drm-misc-2015-10-19' of git://anongit.freedesktop.org/drm-intel into drm-next
More drm-misc for 4.4.
- fb refcount fix in atomic fbdev
- various locking reworks to reduce drm_global_mutex and dev->struct_mutex
- rename docbook to gpu.tmpl and include vga_switcheroo stuff, plus more
  vga_switcheroo (Lukas Wunner)
- viewport check fixes for atomic drivers from Ville
- DRM_DEBUG_VBL from Ville
- non-contentious header fixes from Mikko Rapeli
- small things all over

* tag 'topic/drm-misc-2015-10-19' of git://anongit.freedesktop.org/drm-intel: (31 commits)
  drm/fb-helper: Fix fb refcounting in pan_display_atomic
  drm/fb-helper: Set plane rotation directly
  drm: fix mutex leak in drm_dp_get_mst_branch_device
  drm: Check plane src coordinates correctly during page flip for atomic drivers
  drm: Check crtc viewport correctly with rotated primary plane on atomic drivers
  drm: Refactor plane src coordinate checks
  drm: Swap w/h when converting the mode to src coordidates for a rotated primary plane
  drm: Don't leak fb when plane crtc coodinates are bad
  ALSA: hda - Spell vga_switcheroo consistently
  drm/gem: Use kref_get_unless_zero for the weak mmap references
  drm/vgem: Drop vgem_drm_gem_mmap
  drm: Fix return value of drm_framebuffer_init()
  drm/gem: Use container_of in drm_gem_object_free
  drm/gem: Check locking in drm_gem_object_unreference
  drm/gem: Drop struct_mutex requirement from drm_gem_mmap_obj
  drm/i810_drm.h: include drm/drm.h
  r128_drm.h: include drm/drm.h
  savage_drm.h: include <drm/drm.h>
  gpu/doc: Convert to markdown harder
  gpu/doc: Add vga_switcheroo documentation
  ...
2015-10-20 09:01:49 +10:00
Daniel Vetter f8c47144bf drm/<drivers>: Drop DRM_UNLOCKED from modeset drivers
Just one special case (since i915 lost its ums code, yay):
- radeon: Has slots for the old ums ioctls which don't have
  DRM_UNLOCKED, but all filled with drm_invalid_op. So ok to drop it
  everywhere.

Every other kms driver just has DRM_UNLOCKED for all their ioctls, as
they should.

v2: admgpu happened, include that one too. And i915 lost its UMS
support which means we can change all the i915 ioctls too.

v3: Rebased on top of new vmwgfx DX interface extensions.

v4: Rebase on top of render-node support in exynos.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-10-16 15:50:54 +02:00
Dave Airlie 48f87dd146 Merge commit '06d1ee32a4d25356a710b49d5e95dbdd68bdf505' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next
Backmerge the drm-fixes pull from Linus's tree into drm-next.

This is to fix some conflicts and make future pulls cleaner
2015-10-16 10:25:28 +10:00
Ville Syrjälä b44f84081b drm: Stop using drm_vblank_count() as the hw frame counter
drm_vblank_count() returns the software counter. We should not pretend
it's the hw counter since we use the hw counter to figuere out what the
software counter value should be. So instead provide a new function
drm_vblank_no_hw_counter() for drivers that don't have a real hw
counter. The new function simply returns 0, which is about the only
thing it can do.

Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Vincent Abriou <vincent.abriou@st.com>
[danvet: s/int pipe/unsigned int pipe/ to follow Thierry's interface
change.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-10-07 16:13:52 +02:00
Thierry Reding 88e72717c2 drm/irq: Use unsigned int pipe in public API
This continues the pattern started in commit cc1ef118fc ("drm/irq:
Make pipe unsigned and name consistent"). This is applied to the public
APIs and driver callbacks, so pretty much all drivers need to be updated
to match the new prototypes.

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Jianwei Wang <jianwei.wang.chn@gmail.com>
Cc: Alison Wang <alison.wang@freescale.com>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-10-06 12:57:47 +02:00
Krzysztof Kozlowski cda374253f drm/exynos: Staticize local function in exynos_drm_gem.c
The exynos_drm_gem_mmap_buffer() is not used outside so make it static.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-10-01 14:29:51 +09:00
Gustavo Padovan 3c79fb8c94 drm/exynos: fimd: actually disable dp clock
fimd_dp_clock_enable() was setting the always to enabled,
this patch fix this to actually use the value that is set to 'val'.

Reported-by: Emilio López <emilio.lopez@collabora.co.uk>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-10-01 13:25:11 +09:00
Inki Dae 148ba09c46 drm/exynos: dp: remove suspend/resume functions
This patch removes unnecessary pm suspend/resume functions.

All kms sub drivers will be controlled by top of Exynos drm driver
and connector dpms so these sub drivers shouldn't have their own
pm interfaces.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2015-10-01 13:23:13 +09:00
Gustavo Padovan 10d97d5869 drm/exynos: remove unused mode_fixup() code
CRTC's mode_fixup() isn't used anymore in exynos, remove it.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30 17:05:11 +09:00
Gustavo Padovan 208d7ee3c8 drm/exynos: remove decon_mode_fixup()
The only thing mode_fixup was doing was set the adjusted_mode->vrefresh to
60, but it already has the value of 60 when the decon_mode_fixup() is
called. That means this call is actually pointless and can be removed.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30 17:05:09 +09:00
Gustavo Padovan 50bbfbffa5 drm/exynos: remove fimd_mode_fixup()
The only thing mode_fixup was doing was set the adjusted_mode->vrefresh to
60, but it already has the value of 60 when the fimd_mode_fixup() is
called. That means this call is actually pointless and can be removed.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30 17:05:06 +09:00
Thierry Reding 85a82038b2 drm/exynos: rotator: Clock control is unused if !PM
Protect the rotator_clk_crtl() function with an #ifdef CONFIG_PM guard
to avoid "defined but not used" warnings.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30 16:44:14 +09:00
Thierry Reding 641a2fef39 drm/exynos: fimc: Clock control is unused if !PM
Protect the fimc_clk_ctrl() function with an #ifdef CONFIG_PM guard to
avoid "defined but not used" warnings.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30 16:44:12 +09:00
Thierry Reding 7082947eff drm/exynos: Suspend/resume is unused if !PM
Protect the suspend and resume callbacks with an #ifdef CONFIG_PM_SLEEP
guard to avoid "defined but not used" warnings.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30 16:44:09 +09:00
Joonyoung Shim 48cf53f434 drm/exynos: create a fake mmap offset with gem creation
Don't create a fake mmap offset in exynos_drm_gem_dumb_map_offset. If
not, it will call drm_gem_create_mmap_offset whenever user requests
DRM_IOCTL_MODE_MAP_DUMB ioctl.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30 16:39:41 +09:00
Joonyoung Shim 8755556fbb drm/exynos: remove call to drm_gem_free_mmap_offset()
The drm_gem_object_release() function already performs this cleanup,
so there is no reason to do it explicitly.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-09-30 16:39:41 +09:00