Add RAID1 write IU and implement RAID1 write support. Change brand names
ADM/ADG to TRIPLE/RAID-6.
Link: https://lore.kernel.org/r/161549373324.25025.2441592111049564780.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add in new IU definition and implement support for RAID5 and RAID6 writes.
Link: https://lore.kernel.org/r/161549372734.25025.963261942897080281.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Factor out code common to all scatter-gather list building to prepare for
new AIO functionality. AIO (Accelerated I/O) requests go directly to disk
No functional changes.
Link: https://lore.kernel.org/r/161549372147.25025.9706613054649682229.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Refactor aio submission code:
1. Break up function pqi_raid_bypass_submit_scsi_cmd()
into smaller functions.
2. Add common block (rmd - raid_map_data) to carry around into newly
added functions.
3. Prepare for new AIO functionality.
No functional changes.
Link: https://lore.kernel.org/r/161549371553.25025.8840958689316611074.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add support for newer hardware by adding in a product identifier. This
identifier can then be used to check for the hardware generation.
Link: https://lore.kernel.org/r/161549370966.25025.2968242206975557607.stgit@brunhilda
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
While failing queued I/Os in TMF path, there was a request leak and hence
stale entries in request pool with ref count being non-zero. In shutdown
path we have a BUG_ON to catch stuck I/O either in firmware or in the
driver. The stale requests caused a system crash. The I/O request pool
leakage also lead to a significant performance drop.
Link: https://lore.kernel.org/r/161549370379.25025.12793264112620796062.stgit@brunhilda
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Correct SCSI midlayer sending more requests than exposed host queue depth
causing firmware ASSERT and lockup issues by enabling host-wide tags.
Note: This also results in better performance.
Link: https://lore.kernel.org/r/161549369787.25025.8975999483518581619.stgit@brunhilda
Suggested-by: Ming Lei <ming.lei@redhat.com>
Suggested-by: John Garry <john.garry@huawei.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull 5.12/scsi-fixes into the 5.13 SCSI tree to provide a baseline for
some UFS changes that would otherwise cause conflicts during the
merge.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
gcc-11 warns about an strnlen with a length larger than the size of the
passed buffer:
drivers/scsi/lpfc/lpfc_attr.c: In function 'lpfc_nvme_info_show':
drivers/scsi/lpfc/lpfc_attr.c:518:25: error: 'strnlen' specified bound 4095 exceeds source size 24 [-Werror=stringop-overread]
518 | strnlen(LPFC_NVME_INFO_MORE_STR, PAGE_SIZE - 1)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In this case, the code is entirely valid, as the string is properly
terminated, and the size argument is only there out of extra caution in
case it exceeds a page.
This cannot really happen here, so just simplify it to a sizeof().
Link: https://lore.kernel.org/r/20210322160253.4032422-10-arnd@kernel.org
Fixes: afff0d2321 ("scsi: lpfc: Add Buffer overflow check, when nvme_info larger than PAGE_SIZE")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Building with 'make W=1' shows a few harmless -Wempty-body warning for the
mvsas driver:
drivers/scsi/mvsas/mv_94xx.c: In function 'mvs_94xx_phy_reset':
drivers/scsi/mvsas/mv_94xx.c:278:63: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
278 | mv_dprintk("phy hard reset failed.\n");
| ^
drivers/scsi/mvsas/mv_sas.c: In function 'mvs_task_prep':
drivers/scsi/mvsas/mv_sas.c:723:57: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body]
723 | SAS_ADDR(dev->sas_addr));
| ^
Change the empty dprintk() macros to no_printk(), which avoids this warning
and adds format string checking.
Link: https://lore.kernel.org/r/20210322103316.620694-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Building with 'make W=1' shows a harmless -Wempty-body warning:
drivers/scsi/aic94xx/aic94xx_init.c: In function 'asd_free_queues':
drivers/scsi/aic94xx/aic94xx_init.c:858:62: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
858 | ASD_DPRINTK("Uh-oh! Pending is not empty!\n");
Change the empty ASD_DPRINTK() macro to no_printk(), which avoids this
warning and adds format string checking.
Link: https://lore.kernel.org/r/20210322102549.278661-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The variable biosaddr is being assigned a value that is never read, the
variable is redundant and can be safely removed.
Link: https://lore.kernel.org/r/20210325170731.484651-1-colin.king@canonical.com
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Variable err is assigned -ENOMEM followed by an error return path via label
err_udev that does not access the variable and returns with the -ENOMEM
error return code. The assignment to err is redundant and can be removed.
Link: https://lore.kernel.org/r/20210327230650.25803-1-colin.king@canonical.com
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
struct request and struct request_queue are declared twice. Remove the
duplicate declarations.
Link: https://lore.kernel.org/r/20210327030850.918018-1-wanjiabing@vivo.com
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit b43abcbbd5 ("scsi: fnic: Ratelimit printks to avoid flooding when
vlan is not set by the switch.i") added printk_ratelimit() in front of a
couple of debug-mode messages to reduce logging overrun when debugging the
driver. The code:
> if (printk_ratelimit())
> FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host,
> "Start VLAN Discovery\n");
ends up calling printk_ratelimit() quite often, triggering many kernel
messages about callbacks being supressed.
The fix is to decompose FNIC_FCS_DBG(), then change the order of checks so
that printk_ratelimit() is only called if driver debugging is enabled.
Link: https://lore.kernel.org/r/20210323172756.5743-1-lduncan@suse.com
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Perform logout of all remote ports so that all I/Os with driver are
requeued with midlayer for retry.
Link: https://lore.kernel.org/r/20210329085229.4367-12-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For the mailbox thread that encounters a PCIe error, pause that thread
until PCIe link reset/recovery has completed to prevent the thread from
possibly unmapping any type of DMA resource that might be in progress.
Link: https://lore.kernel.org/r/20210329085229.4367-10-njavali@marvell.com
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After RISC RESET, the poll time for completion is too short. Fix the
completion polling time.
Link: https://lore.kernel.org/r/20210329085229.4367-8-njavali@marvell.com
Tested-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On bsg command completion, bsg_job_done() was called while qla driver
continued to access the bsg_job buffer. bsg_job_done() would free up
resources that ended up being reused by other task while the driver
continued to access the buffers. As a result, driver was reading garbage
data.
localhost kernel: BUG: KASAN: use-after-free in sg_next+0x64/0x80
localhost kernel: Read of size 8 at addr ffff8883228a3330 by task swapper/26/0
localhost kernel:
localhost kernel: CPU: 26 PID: 0 Comm: swapper/26 Kdump:
loaded Tainted: G OE --------- - - 4.18.0-193.el8.x86_64+debug #1
localhost kernel: Hardware name: HP ProLiant DL360
Gen9/ProLiant DL360 Gen9, BIOS P89 08/12/2016
localhost kernel: Call Trace:
localhost kernel: <IRQ>
localhost kernel: dump_stack+0x9a/0xf0
localhost kernel: print_address_description.cold.3+0x9/0x23b
localhost kernel: kasan_report.cold.4+0x65/0x95
localhost kernel: debug_dma_unmap_sg.part.12+0x10d/0x2d0
localhost kernel: qla2x00_bsg_sp_free+0xaf6/0x1010 [qla2xxx]
Link: https://lore.kernel.org/r/20210329085229.4367-6-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Consolidate zio threshold setting for both FCP & NVMe to prevent one
protocol from clobbering the setting of the other protocol.
Link: https://lore.kernel.org/r/20210329085229.4367-5-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Session was stuck due to explicit logout to target timing out. The target
was in an unresponsive state. This timeout induced an error to the GNL
command from moving forward.
Link: https://lore.kernel.org/r/20210329085229.4367-4-njavali@marvell.com
Tested-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The host:channel:scsi_target_id information is helpful in matching an FC
port with a SCSI device, so add it. For initiator FC ports, a -1 would be
displayed for "target" part.
Link: https://lore.kernel.org/r/20210329085229.4367-3-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Removing the response queue processing in the send path is showing IOPS
drop. Add back the process_response_queue() call in the send path.
Link: https://lore.kernel.org/r/20210329085229.4367-2-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A kernel panic was observed due to a timing issue between the sync thread
and the initiator processing a login response from the target. The session
reopen can be invoked both from the session sync thread when iscsid
restarts and from iscsid through the error handler. Before the initiator
receives the response to a login, another reopen request can be sent from
the error handler/sync session. When the initial login response is
subsequently processed, the connection has been closed and the socket has
been released.
To fix this a new connection state, ISCSI_CONN_BOUND, is added:
- Set the connection state value to ISCSI_CONN_DOWN upon
iscsi_if_ep_disconnect() and iscsi_if_stop_conn()
- Set the connection state to the newly created value ISCSI_CONN_BOUND
after bind connection (transport->bind_conn())
- In iscsi_set_param(), return -ENOTCONN if the connection state is not
either ISCSI_CONN_BOUND or ISCSI_CONN_UP
Link: https://lore.kernel.org/r/20210325093248.284678-1-gulam.mohamed@oracle.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Gulam Mohamed <gulam.mohamed@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
index 91074fd97f64..f4bf62b007a0 100644
On some configurations, gcc warns about overlapping source and destination
arguments to snprintf:
drivers/scsi/pm8001/pm8001_init.c: In function 'pm8001_request_msix':
drivers/scsi/pm8001/pm8001_init.c:977:3: error: 'snprintf' argument 4 may overlap destination object 'pm8001_ha' [-Werror=restrict]
977 | snprintf(drvname, len, "%s-%d", pm8001_ha->name, i);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/pm8001/pm8001_init.c:962:56: note: destination object referenced by 'restrict'-qualified argument 1 was declared here
962 | static u32 pm8001_request_msix(struct pm8001_hba_info *pm8001_ha)
| ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~
I first assumed this was a gcc bug, as that should not happen, but a
reduced test case makes it clear that this happens when the loop counter is
not bounded by the array size.
Help the compiler out by adding an explicit limit here to make the code
slightly more robust and avoid the warning.
Link: https://godbolt.org/z/6T1qPM
Link: https://lore.kernel.org/r/20210323125458.1825564-1-arnd@kernel.org
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
s/defintions/definitions/ ....two different places.
Link: https://lore.kernel.org/r/20210322205821.1449844-1-unixbhaskar@gmail.com
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
vcc/vccq/vccq2 have already been NULL checked at this point in
ufshcd_find_max_sup_active_icc_level().
Link: https://lore.kernel.org/r/20210319070916.2254-1-zbestahu@gmail.com
Signed-off-by: Yue Hu <huyue2@yulong.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following coccicheck warning:
WARNING: casting value returned by memory allocation function is useless.
Link: https://lore.kernel.org/r/1615515500-946-1-git-send-email-wangqing@vivo.com
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of strcpy'ing into a stack buffer, just let additional_notice point
to a string literal living in .rodata. This is better in a few ways:
- Smaller .text - instead of gcc compiling the strcpys as a bunch of
immediate stores (effectively encoding the string literal in the
instruction stream), we only pay the price of storing the literal in
.rodata.
- Faster, because there's no string copying.
- Smaller stack usage (with my compiler, 72 bytes instead of 176 for the
sole caller, bnx2i_indicate_kcqe)
Moreover, it's currently possible for additional_notice[] to get used
uninitialized, so some random stack garbage would be passed to printk() -
in the worst case without any '\0' anywhere in those 64 bytes. That could
be fixed by initializing additional_notice[0], but the same is achieved
here by initializing the new pointer variable to "".
Also give the message pointer a similar treatment - there's no point making
temporary copies on the stack of those two strings.
Link: https://lore.kernel.org/r/20210310221602.2494422-1-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Don Brace