-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJV/yX5AAoJEHm+PkMAQRiGUc4IAIFtSt2EORex45d2c64Varjm
4wVJM6k1xz0e8c5bI5D03y/WaefIC2LlKHtWw4+TytnwWEryuGQ1IitvDPZLIntk
I2tUN1IzyxZrJcG2GyfozjxSxeIcaL7us5j7555kEaRVWMamqDaQgVgEKFRqD43N
M4y8qRUeU3OiaL3OhQ9beSfpI/XqjaT+ECGO5HKC3NOJtTrD+cFqLAG9ScCPhvtk
YrrXx3K6J3mylvdvJ5W6JlxOrhFMO+YzViy2bRY8OnAR2vD88p61eT8V2+ENbnMj
+AqXS4HOBpJ6I1Qhff99r0YyvVT/ln9dW7qLAXK3WG27z6HOSWr8KWNUyQD2VLE=
=9yBb
-----END PGP SIGNATURE-----
Merge tag 'v4.3-rc2' into topic/drm-misc
Backmerge Linux 4.3-rc2 because of conflicts in the dp helper code
between bugfixes and new code. Just adjacent lines really.
On top of that there's a silent conflict in the new fsl-dcu driver
merged into 4.3 and
commit 844f9111f6
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date: Wed Sep 2 10:42:40 2015 +0200
drm/atomic: Make prepare_fb/cleanup_fb only take state, v3.
which Thierry Reding spotted and provided a fixup for.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
As reading the interrupt registers clears the outstanding interrupts, we
must process all received interrupts to avoid dropping any. Rearrange
the code to achieve this, and properly check for a HPD interrupt from
the CEC_RXSHPDINT register.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
C99 types are against the style of the Linux kernel. Convert to using
Linus-friendly types. See https://lwn.net/Articles/113367/ for more
information.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Commit 6833d26ef8 ("drm: tda998x: Fix EDID read timeout on HDMI
connect") used a weak scheme to try and delay reading EDID on a HDMI
connect event. It is weak because delaying the notification of a
hotplug event does not stop userspace from trying to read the EDID
within the 100ms delay.
The solution provided here solves this issue:
* When a HDMI connection event is detected, mark a blocking flag for
EDID reads, and start a timer for the delay.
* If an EDID read is attempted, and the blocking flag is set, wait
for the blocking flag to clear.
* When the timer expires, clear the blocking flag and wake any thread
waiting for the EDID read.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Rather than always reporting that the interrupt was handled, we should
report whether we did handle the interrupt. Arrange to report IRQ_NONE
for cases where we found nothing to do.
This allows us to (eventually) recover from stuck-IRQ problems, rather
than causing the kernel to solidly lock up.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
There is no way 'priv' can be NULL in tda998x_irq_thread() - this can
only happen if request_threaded_irq() was passed a NULL priv pointer,
and we would have crashed long before then if that was the case.
We also always ensure that priv->encoder is correctly setup, which
must have been initialised prior to the interrupt being claimed, so we
can remove this check as well.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Pull TDA998x i2c driver fixes from Russell King:
"This fixes the double-checksumming of the AVI infoframe which was
resulting in the checksum always being zero. It went unnoticed as
none of my HDMI devices had a problem with this"
[ Pulling directly from rmk since Dave Airlie is on vacation - Linus ]
* 'drm-tda998x-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
drm/i2c: tda998x: fix bad checksum of the HDMI AVI infoframe
The commit 8c7a075da9
"drm/i2c: tda998x: use drm_hdmi_avi_infoframe_from_display_mode()"
also uses hdmi_avi_infoframe_pack() to create the AVI infoframe.
This function sets the checksum of the frame and this breaks
the second calculation of the checksum done in tda998x_write_if().
Fixes: 8c7a075da9 ("drm/i2c: tda998x: use drm_hdmi_avi_infoframe_from_display_mode()")
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Separate the functionality using sequences of register writes from the
functions that take register defaults. This change renames the arguments
in order to support the extension of reg_sequence to take an optional
delay to be applied after any given register in a sequence is written.
This avoids adding an int to all register defaults, which could
substantially increase memory usage for regmaps with large default tables.
This also updates all the clients of multi_reg_write/register_patch.
Signed-off-by: Nariman Poushin <nariman@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The ADV7511 is probed before its slave encoder init function associates
it with an encoder. This creates a time window during which hot plug
detection interrupts can occur with an encoder, resulting in a crash in
the IRQ handler.
Fix this by ignoring hot plug detection IRQs when no encoder is
associated yet.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Stephen Rothwell reports that he sees a compiler warning on x86_64:
drivers/gpu/drm/i2c/tda998x_drv.c: In function 'tda998x_write_avi':
drivers/gpu/drm/i2c/tda998x_drv.c:647:3: warning: format '%d' expects argument of type 'int', but argument 3 has type 'ssize_t' [-Wformat=]
dev_err(&priv->hdmi->dev, "hdmi_avi_infoframe_pack() failed: %d\n", len);
^
Fix this by using the appropriate length modifier.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
tda998x: use helpers for infoframe.
* 'drm-tda998x-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
drm/i2c: tda998x: use drm_hdmi_avi_infoframe_from_display_mode()
Make use of the DRM HDMI AVI infoframe helper to construct the AVI
infoframe, rather than coding this up ourselves. This allows DRM
to supply proper aspect ratio information derived from the DRM
display mode structure.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Remove the internal dependency on DPMS mode for power management by
using a by a powered state boolean instead, and use the new power off
handler at probe time. This ensure that the regmap cache is properly
marked as dirty when the device is probed, and the registers properly
synced during the first power up.
As a side effect this removes the initialization of current_edid_segment
at probe time, as the field will be initialized when the device is
powered on, at the latest right before reading EDID data.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Christian Kohn <christian.kohn@xilinx.com>
Tested-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
The EDID read code waits for the read completion interrupt to occur
using wait_event_interruptible(). The condition passed to the macro
reads I2C registers. This results in sleeping with the task state set
to TASK_INTERRUPTIBLE, triggering a WARN_ON() introduced in commit
8eb23b9f35 ("sched: Debug nested sleeps").
Fix this by reworking the EDID read code. Instead of checking whether
the read is complete through I2C reads, handle the interrupt registers
in the interrupt handler and update a new edid_read flag accordingly. As
a side effect both the IRQ and polling code paths now process the
interrupt sources through the same code path, simplifying the code.
Cc: stable@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The DDC error interrupt bit is located in REG_INT1, not REG_INT0. Update
both the interrupt wait code and the interrupt sources reset code
accordingly.
Cc: stable@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Change 'pixes' to 'pixels'
Change 'enabel' to 'enable'
Change 'enabeling' to 'enabling'
Signed-off-by: Yannick Guerrini <yguerrini@tomshardware.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
A number of TDA998x updates for the next merge window. Patches
included in this set are:
* adding support for finding the attached CRTCs from DT
* a fix function name mis-spelling in a dev_err()
* simplify the EDID reading by using the drm_do_get_edid() function
instead of coding this ourselves.
* 'drm-tda998x-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
drm/i2c: tda998x: use drm_do_get_edid()
drm/i2c: tda998x: fix misspelling of current function in string
drm/i2c: tda998x: add OF support for finding attached CRTCs
This backmerges drm-fixes into drm-next mainly for the amdkfd
stuff, I'm not 100% confident, but it builds and the amdkfd
folks can fix anything up.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Conflicts:
drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h
3 fixes for the tda998x.
* 'drm-tda998x-fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
drm/i2c: tda998x: set the CEC I2C address based on the slave I2C address
drm: tda998x: Fix EDID read timeout on HDMI connect
drm: tda998x: Protect the page register
Replace the internal EDID read implementation by a call to the new EDID
read core function.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Tested-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Replace a misspelled function name by %s and then __func__.
This was done using Coccinelle, including the use of Levenshtein distance,
as proposed by Rasmus Villemoes.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The I2C address for the TDA9989 and TDA19989 is fixed at 0x34 but the
two LSBs of the TDA19988's address are set by two configuration pins
on the chip. Irrespective of the chip, the associated CEC peripheral's
I2C address is based upon the main I2C address.
This patch avoids any special handling required to support systems that
contain multiple TDA19988 devices on the same I2C bus.
Signed-off-by: Andrew Jackson <Andrew.Jackson@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The ADV7511 supports interlaced modes fine, there's no need to reject
them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
When the HDMI cable is disconnected and reconnected, EDID reading
is called too early raising a EDID read timeout.
This patch uses the system work queue to delay the notification
of the HDMI connect/disconnect event.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
As the HDMI registers of the TDA998x chips are accessed by pages,
the page register must be protected.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch adds a driver for the Analog Devices adv7511. The adv7511 is
a standalone HDMI transmitter chip. It features a HDMI output interface
on one end and video and audio input interfaces on the other.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
This builds upon the previous set of fixes which were pulled on 6th July.
Included in this set are:
- an update from Jean-Francois to add the missing reg documentation entry
to the device tree documentation.
- conversion of the tda998x driver to the component helpers.
* 'tda998x-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox:
drm/i2c: tda998x: add component support
drm/i2c: tda998x: allow re-use of tda998x support code
drm/i2c: tda998x: fix lack of required reg in DT documentation
Conflicts:
drivers/gpu/drm/i2c/tda998x_drv.c
Add component helper support to the tda998x driver. This permits the
TDA998x to be declared as a separate device in device tree, and bound
at the appropriate moment with a co-operating card driver.
The existing slave_encoder interfaces are kept while there are existing
users of it in order to prevent regressions.
Tested-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Re-jig the TDA998x code so that we separate the functionality from the
drm slave encoder implementation. In several places, this is pretty
clearly the correct thing to do, because we can avoid repetitively
having to convert from the drm_encoder to the TDA998x private
structure, particularly with the driver internal functions.
The main motivation behind this change is to allow the code to be
re-used with a standard drm_encoder and drm_connector implementation
based on the component helpers, rather than the slave_encoder system.
The addition of this will be in the following patch.
We keep the slave_encoder interface as there are existing users of
this; we need to give them time to convert and test.
Tested-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
In tda998x_encoder_destroy(), priv->cec is never NULL, so,
remove its test.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The TDA998x can't handle modes with clocks above 150MHz, or resolutions
larger than 8192x2048.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
One of Jean-Francois patches changed the EDID polling to once every
10ms for 10 interations, whereas the original code did 1ms for 100
interations. This appears to cause boot-time detection to take
noticably longer. Revert this change.
Acked-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Currently tda998x_encoder_destroy() calls cec_write() and reg_clear(),
as part of the release procedure. Such calls need to access the I2C bus
and therefore, we need to call them before drm_i2c_encoder_destroy()
which unregisters the I2C device.
This commit moves the latter so it's done afterwards.
Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
Signed-off-by: Ezequiel García <ezequiel@vanguardiasur.com.ar>
Cc: <stable@vger.kernel.org> #v3.9+
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This is C standard hair-splitting, but afaict
- sum will be promoted to signed int in computation since
uint8_t fits
- signed overflow is undefined.
No we need to add up an awful lot of bytes to actually make it
overflow. But I guess the real risk is gcc spotting this and going
bananas. Fix this by simply using unsigned in to force all computations
to use the well-defined unsigned behaviour.
Spotted by coverity.
v2: Simplify the entire computation as suggested by Jean.
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Jean-Francois Moine <moinejf@free.fr>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rather than using a mixture of the parent DRM device and the component
device for messages from the driver, consistently use the component
device for all messages.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
According to some tests on the Cubox (Marvell Armada 510 + TDA19988),
the S/PDIF input asks for a greater audio clock divider.
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch reduces the number of I2C exchanges by setting many bits in
one write and removing a useless write.
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
ca_i2s is only ever written to, but never read, so let's get rid of it.
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch adds a definition of the values of the MUX_AP register and
simplifies the macro's defining the fields of the AIP_CLKSEL register.
This makes the format specific audio init sequence more readable.
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch adds the optional treatment of the tda998x IRQ.
The interrupt function is used to know the display connection status
without polling and to speedup reading the EDID.
The IRQ number and trigger type are defined in the i2c client either
by platform data or in the DT.
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
There is no need to enable/disable EDID read IRQ at each EDID block
read. This patch enables the IRQ at init time.
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch adds DT support to the tda998x.
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch takes care of the write-only registers of the tda998x.
The registers SOFTRESET, TBG_CNTRL_0 and TBG_CNTRL_1 have all bits
cleared after reset, so, they may be fully re-written.
The register MAT_CONTRL is set to
MAT_CONTRL_MAT_BP | MAT_CONTRL_MAT_SC(1)
after reset, so, it may be fully set again to this value.
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch prevents the system to be freezed at audio startup time,
replacing mdelay by msleep.
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
On probe, a message giving the TDA chip version seems to come from the
DRM driver:
armada-drm armada-510-drm: found TDA19988
This patch changes the originator of the message to the TDA driver:
tda998x 0-0070: found TDA19988
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch:
- replaces ARRAY_SIZE() by sizeof() when a number of bytes is needed,
- adds a linefeed in an error message and
- removes an useless variable setting.
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This is a nicer way, and results in proper return codes should the
read of the MSB version register fail.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch adds more error checking inn I2C I/O functions.
In case of I/O error, this permits to avoid writing in bad controller
pages, a bad chipset detection or looping when getting the EDID.
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch simplifies the i2c read/write functions and permits them to
be easily called in more contexts.
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch sets the frequency as 'not indicated' instead of '48kHz'
and uses the asound values in the channel status definition.
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The picture aspect setting was zero, which is reserved.
A setting of Same As Picture makes more sense.
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch replaces hard coded values by hdmi constants.
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Commit 6ae668cc19 (drm/i2c: tda998x: check the CEC device creation)
introduced a memory leak in the error path of tda998x_encoder_init
Picked up by the nightly Coverity scan. CID 1174076
Signed-off-by: Dave Jones <davej@fedoraproject.org>
Acked-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch fixes the ENABLE_SPACE register, the value of which was
inverted.
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The predivider division factor of the register PLL_SERIAL_2 is in the
range 0..3, the value 0 being used for a division by 1.
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch forces the page register to be set on the first I/O operation.
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The cec i2c device is created in tda998x_encoder_init() when the DRM
driver starts.
This patch frees it when the DRM driver is unloaded.
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch checks if the CEC device is well created at intialization
time.
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The AIF has an uninitialized byte. This patch clears the whole buffer
before filling it.
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Fix a bug that was introduced in commit c4c11dd160 ("drm/i2c: tda998x:
add video and audio input configuration") when Sebastian cleaned up my
original patch. Without this being fixed, audio is muted when the
display is turned off, never to be re-enabled.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Darren Etheridge <detheridge@ti.com>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Suppress warning of unused-variables by adding a BUG()+return for invalid
audio-formats.
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
Some LCD controller cannot provide valid VESA style sync, i.e. coincident
HS/VS edges. First, this patch adds hskew passed from the adjusted_mode to
reference pixel calculation to allow those controllers to add an offset
relative to the expected reference pixel.
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Russell King <rmk_kernel@arm.linux.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This fixes the wrong sync generation and sync calculation of TDA998x
for HS/VS-based sync detection.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Darren Etheridge <detheridge@ti.com>
Tested-by: Russell King <rmk_kernel@arm.linux.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This patch adds tda998x specific parameters to allow it to be configured
for different boards using it. Also, this implements rudimentary audio
support for S/PDIF attached controllers.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Darren Etheridge <detheridge@ti.com>
Tested-by: Russell King <rmk_kernel@arm.linux.org.uk>
Tested-by: Russell King <rmk_kernel@arm.linux.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The video-input-port (VIP) is highly configurable. This prepares
current driver to allow to configure VIP configuration, as some
boards connect lcd controller and TDA998x "pin-swapped" and depend
on VIP to swap the pins by register configuration.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Darren Etheridge <detheridge@ti.com>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Russell King <rmk_kernel@arm.linux.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The npix/nline registers are supposed to be programmed with the total
number of pixels/lines, not the displayed pixels/lines, and not minus
one either.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Darren Etheridge <detheridge@ti.com>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Russell King <rmk_kernel@arm.linux.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When switching between various drivers for this device, it's possible
that some critical registers are left containing values which affect
the device operation. One such case encountered is the VIP output
mux register. This defaults to 0x24 on powerup, but other drivers may
set this to 0x12. This results in incorrect colours.
Fix this by ensuring that the register is always set to the power on
default setting.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Darren Etheridge <detheridge@ti.com>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Russell King <rmk_kernel@arm.linux.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
TDA19988 devices need their RAM enabled in order to read EDID
information. Add support for this.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Tested-by: Darren Etheridge <detheridge@ti.com>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Russell King <rmk_kernel@arm.linux.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Move this out of nouveau directory. As we start to add more encoder
slaves used by other drivers, it makes sense to put the Kconfig bits in
one place.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
With refcounting we need to adjust framebuffer refcounts at each
callsite - much easier to do if they all call the same little helper
function.
Reviewed-by: Rob Clark <rob@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pull drm merge (part 1) from Dave Airlie:
"So first of all my tree and uapi stuff has a conflict mess, its my
fault as the nouveau stuff didn't hit -next as were trying to rebase
regressions out of it before we merged.
Highlights:
- SH mobile modesetting driver and associated helpers
- some DRM core documentation
- i915 modesetting rework, haswell hdmi, haswell and vlv fixes, write
combined pte writing, ilk rc6 support,
- nouveau: major driver rework into a hw core driver, makes features
like SLI a lot saner to implement,
- psb: add eDP/DP support for Cedarview
- radeon: 2 layer page tables, async VM pte updates, better PLL
selection for > 2 screens, better ACPI interactions
The rest is general grab bag of fixes.
So why part 1? well I have the exynos pull req which came in a bit
late but was waiting for me to do something they shouldn't have and it
looks fairly safe, and David Howells has some more header cleanups
he'd like me to pull, that seem like a good idea, but I'd like to get
this merge out of the way so -next dosen't get blocked."
Tons of conflicts mostly due to silly include line changes, but mostly
mindless. A few other small semantic conflicts too, noted from Dave's
pre-merged branch.
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (447 commits)
drm/nv98/crypt: fix fuc build with latest envyas
drm/nouveau/devinit: fixup various issues with subdev ctor/init ordering
drm/nv41/vm: fix and enable use of "real" pciegart
drm/nv44/vm: fix and enable use of "real" pciegart
drm/nv04/dmaobj: fixup vm target handling in preparation for nv4x pcie
drm/nouveau: store supported dma mask in vmmgr
drm/nvc0/ibus: initial implementation of subdev
drm/nouveau/therm: add support for fan-control modes
drm/nouveau/hwmon: rename pwm0* to pmw1* to follow hwmon's rules
drm/nouveau/therm: calculate the pwm divisor on nv50+
drm/nouveau/fan: rewrite the fan tachometer driver to get more precision, faster
drm/nouveau/therm: move thermal-related functions to the therm subdev
drm/nouveau/bios: parse the pwm divisor from the perf table
drm/nouveau/therm: use the EXTDEV table to detect i2c monitoring devices
drm/nouveau/therm: rework thermal table parsing
drm/nouveau/gpio: expose the PWM/TOGGLE parameter found in the gpio vbios table
drm/nouveau: fix pm initialization order
drm/nouveau/bios: check that fixed tvdac gpio data is valid before using it
drm/nouveau: log channel debug/error messages from client object rather than drm client
drm/nouveau: have drm debugging macros build on top of core macros
...
Convert #include "..." to #include <path/...> in drivers/gpu/.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
The I2C specific suspend and resume functions have been deprecated and
printing a warning on boot for over a year, dev_pm_ops should be used
instead so convert to that.
Also remove the suspend function since all it does is log.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The passed mode must not be modified by the operation, make it const.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Creating a range property is a common pattern, so create
a convenience function for this and use it where appropriate.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
* 'nouveau/for-airlied' of ../drm-nouveau-next: (77 commits)
drm/nouveau: set TASK_(UN)INTERRUPTIBLE before schedule_timeout()
drm/nv50: fix some not-error error messages
drm/nouveau: introduce gpio engine
drm/nv50: correct wait condition for instmem flush
drm/nouveau: Fix TV-out detection on unposted cards lacking a usable DCB table.
drm/nouveau: Get rid of the remaining VGA CRTC locking.
drm/nouveau: Move display init to a new nouveau_engine.
drm/nouveau: Put back the old 2-messages I2C slave test.
drm/nouveau: Reset AGP before running the init scripts.
drm/nv30: Init the PFB+0x3xx memory timing regs.
drm/nouveau: disable hotplug detect around DP link training
drm/nv50: add function to control GPIO IRQ reporting
drm/nouveau: add nv_mask register accessor
drm/nouveau: fix build without CONFIG_ACPI
drm/nouveau: Reset CRTC owner to 0 before BIOS init.
drm/nouveau: No need to lock/unlock the VGA CRTC regs all the time.
drm/nouveau: Remove useless CRTC_OWNER logging.
drm/nouveau: Add some generic I2C gadget detection code.
drm/i2c/ch7006: Don't assume that the specified config points to static memory.
drm/nv04-nv3x: Implement init-compute-mem.
...
Conflicts:
drivers/gpu/drm/nouveau/nouveau_bios.c
sil164 transmitters are used for DVI outputs on Intel/nvidia and ATI setups.
So far only nouveau can use this driver.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Tested-by: Patrice Mandin <patmandin@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds a drm/kms staging non-API stable driver for GPUs from NVIDIA.
This driver is a KMS-based driver and requires a compatible nouveau
userspace libdrm and nouveau X.org driver.
This driver requires firmware files not available in this kernel tree,
interested parties can find them via the nouveau project git archive.
This driver is reverse engineered, and is in no way supported by nVidia.
Support for nearly the complete range of nvidia hw from nv04->g80 (nv50)
is available, and the kms driver should support driving nearly all
output types (displayport is under development still) along with supporting
suspend/resume.
This work is all from the upstream nouveau project found at
nouveau.freedesktop.org.
The original authors list from nouveau git tree is:
Anssi Hannula <anssi.hannula@iki.fi>
Ben Skeggs <bskeggs@redhat.com>
Francisco Jerez <currojerez@riseup.net>
Maarten Maathuis <madman2003@gmail.com>
Marcin Kościelnicki <koriakin@0x04.net>
Matthew Garrett <mjg@redhat.com>
Matt Parnell <mparnell@gmail.com>
Patrice Mandin <patmandin@gmail.com>
Pekka Paalanen <pq@iki.fi>
Xavier Chantry <shiningxc@gmail.com>
along with project founder Stephane Marchesin <marchesin@icps.u-strasbg.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Daniel Vetter