Even though we don't register the counters until the child is right about
to exec(), we're still going to get at least a few events while the
fork()'d child is still executing 'perf' and in particular we're going to
get the MMAP events.
We can't distinguish the ones in the newly executed process because the
PID will be the same.
One way to solve this would be to have a PERF_RECORD_EXEC event, and when
this is seen 'perf' can flush it's map cache. We can't use
PERF_RECORD_COMM since that's generated by other things, not just exec().
Actually, thinking about it some more, using PERF_RECORD_COMM might be a
good enough approximation.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1267196914-16238-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Because symbol->end is not fixed up at symbol_filter time, only
after all symbols for a DSO are loaded, and that, for asm
symbols, may be bogus, causing segfaults when hits happen in
these symbols.
Reported-by: David Miller <davem@davemloft.net>
Reported-by: Anton Blanchard <anton@samba.org>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: <stable@kernel.org> # for .33.x. Does not apply cleanly, needs backport.
LKML-Reference: <20100225155740.GB8553@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Be more clear about DSO long names and tell from which file
kernel symbols were obtained, all in --verbose mode:
[root@mica ~]# perf report -v > /dev/null
Looking at the vmlinux_path (5 entries long)
Using /lib/modules/2.6.33-rc8-tip-00777-g0918527-dirty/build/vmlinux for symbols
[root@mica ~]# mv /lib/modules/2.6.33-rc8-tip-00777-g0918527-dirty/build/vmlinux /tmp/dd
[root@mica ~]# perf report -v > /dev/null
Looking at the vmlinux_path (5 entries long)
Using /proc/kallsyms for symbols
[root@mica ~]#
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1266866139-6361-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In function dso__split_kallsyms(), curr_map saves the return value
of map__new2. So check it instead of var map after the call returns.
Signed-off-by: Zhang Yanmin <yanmin_zhang@linux.intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: <stable@kernel.org> # for .33.x
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1267066851.1726.9.camel@localhost>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If we know the size of a tuple in advance, there's no need to resize
it - start out with the known size in the first place.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Keiichi KII <k-keiichi@bx.jp.nec.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1266822779.6426.4.camel@tropicana>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Add base support for Python scripting to perf trace.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Keiichi KII <k-keiichi@bx.jp.nec.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1264580883-15324-6-git-send-email-tzanussi@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Create a scripting-engines directory to contain scripting engine
implementation code, in anticipation of the addition of new scripting
support. Also removes trace-event-perl.h.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Keiichi KII <k-keiichi@bx.jp.nec.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1264580883-15324-5-git-send-email-tzanussi@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
This stuff is needed by all scripting engines; move it from the Perl
engine source to a more common place.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Keiichi KII <k-keiichi@bx.jp.nec.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1264580883-15324-4-git-send-email-tzanussi@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Clear struct probe_point before using it in
show_perf_probe_events(), and set pp->found counter correctly in
synthesize_perf_probe_point(). Without this initialization,
clear_probe_point() will free random addresses.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
LKML-Reference: <20100218181652.26547.57790.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
As the parent comm then is worthless, confusing users about the
thread where the sample really happened, leading to think that
the sample happened in the parent, not where it really happened,
in the children of a thread for which a PERF_RECORD_COMM event
was not received.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1266627727-19715-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In 2161db9 we stopped failing when not finding modules when
asked too, but then the kernel maps (just one, for vmlinux)
wasn't having its ->end field correctly set up, so symbols were
not being found for the vmlinux map because its range was 0-0.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1266702793-29434-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
cpumode bits are defined as such:
#define PERF_RECORD_MISC_KERNEL (1 << 0)
#define PERF_RECORD_MISC_USER (2 << 0)
#define PERF_RECORD_MISC_HYPERVISOR (3 << 0)
We need to compare against the complete value of cpumode,
otherwise hypervisor samples get incorrectly attributed as
userspace.
Signed-off-by: Anton Blanchard <anton@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: fweisbec@gmail.com
LKML-Reference: <20100209034304.GA3702@kryten>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
First, for programs and prelinked libraries, annotate code was
fooled by objdump output IPs (src->eip in the code) being
wrongly converted to absolute IPs. In such case there were no
conversion needed, but in
src->eip = strtoull(src->line, NULL, 16);
src->eip = map->unmap_ip(map, src->eip); // = eip + map->start - map->pgoff
we were reading absolute address from objdump (e.g. 8048604) and
then almost doubling it, because eip & map->start are
approximately close for small programs.
Needless to say, that later, in record_precise_ip() there was no
matching with real runtime IPs.
And second, like with `perf annotate` the problem with
non-prelinked *.so was that we were doing rip -> objdump address
conversion wrong.
Also, because unlike `perf annotate`, `perf top` code does
annotation based on absolute IPs for performance reasons(*), new
helper for mapping objdump addresse to IP is introduced.
(*) we get samples info in absolute IPs, and since we do lots of
hit-testing on absolute IPs at runtime in record_precise_ip(), it's
better to convert objdump addresses to IPs once and do no conversion
at runtime.
I also had to fix how objdump output is parsed (with hardcoded
8/16 characters format, which was inappropriate for ET_DYN dsos
with small addresses like '4ac')
Also note, that not all objdump output lines has associtated
IPs, e.g. look at source lines here:
000004ac <my_strlen>:
extern "C"
int my_strlen(const char *s)
4ac: 55 push %ebp
4ad: 89 e5 mov %esp,%ebp
4af: 83 ec 10 sub $0x10,%esp
{
int len = 0;
4b2: c7 45 fc 00 00 00 00 movl $0x0,-0x4(%ebp)
4b9: eb 08 jmp 4c3 <my_strlen+0x17>
while (*s) {
++len;
4bb: 83 45 fc 01 addl $0x1,-0x4(%ebp)
++s;
4bf: 83 45 08 01 addl $0x1,0x8(%ebp)
So we mark them with eip=0, and ignore such lines in annotate
lookup code.
Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
[ Note: one hunk of this patch was applied by Mike in 57d8188 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1265550376-12665-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
perf top and perf record refuses to initialize on non-modular kernels:
refuse to initialize:
$ perf top -v
map_groups__set_modules_path_dir: cannot open /lib/modules/2.6.33-rc6-tip-00586-g398dde3-dirty/
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1265223128-11786-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Setting _FILE_OFFSET_BITS and using O_LARGEFILE, lseek64, etc,
is redundant. Thanks H. Peter Anvin for pointing it out.
So, this patch removes O_LARGEFILE, lseek64, etc.
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4B6A8972.3070605@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The problem was we were incorrectly calculating objdump
addresses for sym->start and sym->end, look:
For simple ET_DYN type DSO (*.so) with one function, objdump -dS
output is something like this:
000004ac <my_strlen>:
int my_strlen(const char *s)
4ac: 55 push %ebp
4ad: 89 e5 mov %esp,%ebp
4af: 83 ec 10 sub $0x10,%esp
{
i.e. we have relative-to-dso-mapping IPs (=RIP) there.
For ET_EXEC type and probably for prelinked libs as well (sorry
can't test - I don't use prelink) objdump outputs absolute IPs,
e.g.
08048604 <zz_strlen>:
extern "C"
int zz_strlen(const char *s)
8048604: 55 push %ebp
8048605: 89 e5 mov %esp,%ebp
8048607: 83 ec 10 sub $0x10,%esp
{
So, if sym->start is always relative to dso mapping(*), we'll
have to unmap it for ET_EXEC like cases, and leave as is for
ET_DYN cases.
(*) and it is - we've explicitely made it relative. Look for
adjust_symbols handling in dso__load_sym()
Previously we were always unmapping sym->start and for ET_DYN
dsos resulting addresses were wrong, and so objdump output was
empty.
The end result was that perf annotate output for symbols from
non-prelinked *.so had always 0.00% percents only, which is
wrong.
To fix it, let's introduce a helper for converting rip to
objdump address, and also let's document what map_ip() and
unmap_ip() do -- I had to study sources for several hours to
understand it.
Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1265223128-11786-8-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Not to pollute too much 'perf annotate' debugging sessions.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1265223128-11786-7-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We want to stream events as fast as possible to perf.data, and
also in the future we want to have splice working, when no
interception will be possible.
Using build_id__mark_dso_hit_ops to create the list of DSOs that
back MMAPs we also optimize disk usage in the build-id cache by
only caching DSOs that had hits.
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1265223128-11786-6-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Because 'perf record' will have to find the build-ids in after
we stop recording, so as to reduce even more the impact in the
workload while we do the measurement.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1265223128-11786-5-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We can check using strcmp, most DSOs don't start with '[' so the
test is cheap enough and we had to test it there anyway since
when reading perf.data files we weren't calling the routine that
created this global variable and thus weren't setting it as
"loaded", which was causing a bogus:
Failed to open [vdso], continuing without symbols
Message as the first line of 'perf report'.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1265223128-11786-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
While debugging a problem reported by Pekka Enberg by printing
the IP and all the maps for a thread when we don't find a map
for an IP I noticed that dso__load_sym needs to fixup these
extra maps it creates to hold symbols in different ELF sections
than the main kernel one.
Now we're back showing things like:
[root@doppio linux-2.6-tip]# perf report | grep vsyscall
0.02% mutt [kernel.kallsyms].vsyscall_fn [.] vread_hpet
0.01% named [kernel.kallsyms].vsyscall_fn [.] vread_hpet
0.01% NetworkManager [kernel.kallsyms].vsyscall_fn [.] vread_hpet
0.01% gconfd-2 [kernel.kallsyms].vsyscall_0 [.] vgettimeofday
0.01% hald-addon-rfki [kernel.kallsyms].vsyscall_fn [.] vread_hpet
0.00% dbus-daemon [kernel.kallsyms].vsyscall_fn [.] vread_hpet
[root@doppio linux-2.6-tip]#
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1265223128-11786-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
I noticed while writing the first test in 'perf regtest' that to
just test the symbol handling routines one needs to create a
perf session, that is a layer centered on a perf.data file,
events, etc, so I untied these layers.
This reduces the complexity for the users as the number of
parameters to most of the symbols and session APIs now was
reduced while not adding more state to all the map instances by
only having data that is needed to split the kernel (kallsyms
and ELF symtab sections) maps and do vmlinux relocation on the
main kernel map.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1265223128-11786-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Open perf data file with O_LARGEFILE flag since its size is
easily larger that 2G.
For example:
# rm -rf perf.data
# ./perf kmem record sleep 300
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 3142.147 MB perf.data
(~137282513 samples) ]
# ll -h perf.data
-rw------- 1 root root 3.1G .....
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4B68F32A.9040203@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
linux/hash.h, hash header of kernel, is also useful for perf.
util/include/linuxhash.h includes linux/hash.h, so we can use
hash facilities (e.g. hash_long()) in perf now.
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1264851813-8413-3-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch is required to test the next patch for perf lock.
At 064739bc4b ,
support for the modifier "__data_loc" of format is added.
But, when I wanted to parse format of lock_acquired (or some
event else), raw_field_ptr() did not returned correct pointer.
So I modified raw_field_ptr() like this patch. Then
raw_field_ptr() works well.
Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Steven Rostedt <srostedt@redhat.com>
LKML-Reference: <1264851813-8413-2-git-send-email-mitake@dcl.info.waseda.ac.jp>
[ v3: fixed minor stylistic detail ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Removing one extra step needed in the tools that need this,
fixing a bug in 'perf probe' where this was not being done.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1264633557-17597-4-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
To make it clear and allow for direct usage by, for instance,
regression test suites.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1264633557-17597-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
So that we can call it directly from regression tests, and also
to reduce the size of dso__load_kernel_sym(), making it more
clear.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1264633557-17597-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Probably this wasn't noticed when testing this on my parisc
machine because I must have copied manually to its cache the
vmlinux file used in the x86_64 machine, now that I tried
looking on a x86-32 machine with a fresh cache, kernel symbols
weren't being resolved even with the right kallsyms copy on its
cache, duh.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1264178102-4203-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Only if we parsed /proc/kallsyms (or a copy found in the buildid
cache) we should set the dso long name to "[kernel.kallsyms]".
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1264178102-4203-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
For now it just has operations to examine a given file, find its
build-id and add or remove it to/from the cache.
Useful, for instance, when adding binaries sent together with a
perf.data file, so that we can add them to the cache and have
the tools find it when resolving symbols.
It'll also manage the size of the cache like 'ccache' does.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1264008525-29025-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Found while analysing a perf.data file collected on an ARM
machine where an explicitely specified vmlinux was being
disregarded.
Reported-by: Jamie Iles <jamie.iles@picochip.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263904574-30732-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Because it may be possible that there was no buildid section,
where we would set this to 1.
Found while analysing a perf.data file collected on an ARM
machine where an explicitely specified vmlinux was being
disregarded.
Reported-by: Jamie Iles <jamie.iles@picochip.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263904574-30732-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
getline() is considered as undeclared in util/util.c because
it includes string.h, that in turn includes stdio.h, without
having defined _GNU_SOURCE.
But util.c also includes util.h that handles the _GNU_SOURCE and
all the needed inclusions already. Let's include only util.h
and sys/mman.h which is the only one header not handled by
util.h
This fixes the following build error:
util/util.c: In function 'slow_copyfile':
util/util.c:49: erreur: implicit declaration of function
'getline' util/util.c:49: erreur: nested extern declaration of 'getline'
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263648075-3858-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
As it is in PARISC64:
parisc:~# uname -a
Linux parisc 2.6.33-rc4-tip+ #1 SMP Thu Jan 14 13:33:34 BRST
2010 parisc64 GNU/Linux parisc:~# grep -w _text /proc/kallsyms
0000000040100000 A _text
parisc:~# grep 0000000040100000 /proc/kallsyms
0000000040100000 T stext
0000000040100000 T _stext
0000000040100000 A _text
parisc:~#
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263586107-1756-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since we use ->long_name in dsos__find now.
Now 'perf buildid_list' is not duplicating those and managing to
show the proper build-ids for the DSOs with hits:
[root@doppio linux-2.6-tip]# perf buildid-list -H
74f9930ee94475b6b3238caf3725a50d59cb994b [kernel.kallsyms]
9ffdcac0a7935922d1f04b6cc9029dfef0f066ef /lib/modules/2.6.33-rc4-tip+/kernel/arch/x86/crypto/aes-x86_64.ko
3aaf89c32ebfc438ff546c93597d41788e3e65f3 /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/wireless/iwlwifi/iwl3945.ko
19f46033f73e1ec612937189bb118c5daba5a0c8 /lib/modules/2.6.33-rc4-tip+/kernel/net/mac80211/mac80211.ko
1772f014a7a7272859655acb0c64a20ab20b75ee /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/e1000e/e1000e.ko
eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 /lib64/libc-2.10.2.so
5c68f7afeb33309c78037e374b0deee84dd441f6 /lib64/libpthread-2.10.2.so
e9c9ad5c138ef882e4507d2605645b597da43873 /bin/dbus-daemon
bcda7d09eb6c9ee380dae0ed3d591d4311decc31 /lib64/libdbus-1.so.3.4.0
7cc449a77f48b85d6088114000e970ced613bed8 /usr/lib64/libcrypto.so.0.9.8k
fdd1ccd1ff7917ab020653147ab3bacf0a85b5b9 /lib64/libglib-2.0.so.0.2000.5
e4417ebb8762e5f2eee93c8011a71115ff5edad8 /lib64/libgobject-2.0.so.0.2000.5
931e49461f6df99104f0febcc52f6fed5e2efce6 /usr/sbin/sshd
dab5f724c088f89fbd8304da553ed6cb30bbec96 /usr/lib64/libgdk-x11-2.0.so.0.1600.6
f2037a091ef36b591187a858d75e203690ea9409 /usr/sbin/openvpn
a8e4f743b40fb1fd8b85e2f9b88d93b661472b8f /bin/find
81120aada06e68b1e85882925a0fc6d7345ef59a /home/acme/bin/perf
[root@doppio linux-2.6-tip]#
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263568672-30323-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Using this option 'perf buildid-list' will process all samples,
marking the DSOs that had some hits to list just them.
This in turn will be used by a new porcelain, 'perf archive',
that will be just a shell script to create a tarball from the
'perf buildid-list --with-hits' output and the files cached by
'perf record' in ~/.debug.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263519930-22803-4-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Because some tools will only want to know with maps had hits,
not needing the full symbol resolution done by
thread__find_addr_location.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263519930-22803-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
In the past 'perf record' had to process only userspace MMAP
events, the ones generated in the kernel, but after we reused
the MMAP events to encode the module mapings we ended up adding
them first to the list of userspace DSOs (dsos__user) and to the
kernel one (dsos__kernel).
Fix this by encoding the header.misc field and then using it,
like other parts to decide the right DSOs list to insert/find.
The gotcha here is that since the kernel puts zero in .misc,
which isn't PERF_RECORD_MISC_KERNEL (1 << 1), to differentiate,
we put 1 in .misc.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263519930-22803-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If not we end up duplicating the module DSOs because first we
insert them using the short name found in /proc/modules, then,
when processing synthesized MMAP events we add them again.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263519930-22803-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
So that when we don't have a vmlinux handy we can store the
kallsyms for later use by 'perf report'.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263501006-14185-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Since they can come from another architecture with bigger
pointers, i.e. processing a 64-bit perf.data on a 32-bit arch.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263478990-8200-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
We were always looking at the running machine /proc/modules,
even when processing a perf.data file, which only makes sense
when we're doing 'perf record' and 'perf report' on the same
machine, and in close sucession, or if we don't use modules at
all, right Peter? ;-)
Now, at 'perf record' time we read /proc/modules, find the long
path for modules, and put them as PERF_MMAP events, just like we
did to encode the reloc reference symbol for vmlinux. Talking
about that now it is encoded in .pgoff, so that we can use
.{start,len} to store the address boundaries for the kernel so
that when we reconstruct the kmaps tree we can do lookups right
away, without having to fixup the end of the kernel maps like we
did in the past (and now only in perf record).
One more step in the 'perf archive' direction when we'll finally
be able to collect data in one machine and analyse in another.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263396139-4798-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
So that we can restore them to the right DSO list (either
dsos__kernel or dsos__user).
We do that just like the kernel does for the other events,
encoding PERF_RECORD_MISC_{KERNEL,USER} in perf_event_header.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1262901583-8074-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Linus Torvalds