Omit an extra message for a memory allocation failure in this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
vio_device_id are not supposed to change at runtime. All functions
working with vio_device_id provided by <asm/vio.h> work with
const vio_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds CRC generation and validation support for nx-842.
Add CRC flag so that nx842 coprocessor includes CRC during compression
and validates during decompression.
Also changes in 842 SW compression to append CRC value at the end
of template and checks during decompression.
Signed-off-by: Haren Myneni <haren@us.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Return success instead of error if compression succeeds but the output is
larger than the input.
It's unlikely that the caller will use the compressed data since it's
larger than the original uncompressed data, but there was no error and
returning an error code is incorrect. Further, for testing small input
buffers, the output is likely to be larger than the input and success
needs to be returned to verify the test.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the common 'platform' registration module, and move the crypto
compression driver registration into each of the pSeries and PowerNV
platform NX 842 drivers. Change the nx-842.c code into simple common
functions that each platform driver uses to perform constraints-based
buffer changes, i.e. realigning and/or resizing buffers to match the
driver's hardware requirements.
The common 'platform' module was my mistake to create - since each
platform driver will only load/operate when running on its own
platform (i.e. a pSeries platform or a PowerNV platform), they can
directly register with the crypto subsystem, using the same alg and
driver name. This removes unneeded complexity.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Don't register the pSeries driver when parsing the device tree returns
ENODEV.
The nx842_probe() function in the pSeries driver returns error instead
of registering as a crypto compression driver, when it receives an
error return value from the nx842_OF_upd() function that probes the
device tree nodes, except when ENODEV is returned. However ENODEV
should not be a special case and the driver should not register when
there is no hw device, or the hw device is disabled.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the kzalloc() calls in nx842_probe() and nx842_OF_upd() to the top
of the functions, before taking the devdata spinlock.
Since kzalloc() without GFP_ATOMIC can sleep, it can't be called while
holding a spinlock. Move the calls to before taking the lock.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the 'status' field from the pSeries NX driver data.
The 'status' field isn't used by the driver at all; it simply checks the
devicetree status node at initialization, and returns success if 'okay'
and failure otherwise.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the __init and __exit modifiers from the VIO driver probe and
remove functions.
The driver functions should not be marked __init/__exit because they
can/will be called during runtime, not only at module init and exit.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
While we never would successfully load on the wrong machine type, there
is extra output by default regardless of machine type.
For instance, on a PowerVM LPAR, we see the following:
nx_compress_powernv: loading
nx_compress_powernv: no coprocessors found
even though those coprocessors could never be found.
Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Cc: Dan Streetman <ddstreet@us.ibm.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If the device-tree indicates the nx-842 device's status is 'disabled',
we emit two messages:
nx_compress_pseries ibm,compression-v1: nx842_OF_upd_status: status 'disabled' is not 'okay'.
nx_compress_pseries ibm,compression-v1: nx842_OF_upd: device disabled
Given that 'disabled' is a valid state, and we are going to emit that
the device is disabled, only print out a non-'okay' status if it is not
'disabled'.
Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
While there is no technical reason that both nx-842.c and
nx-842-pseries.c can have the same name for the init/exit functions, it
is a bit confusing with initcall_debug. Rename the pseries specific
functions appropriately
Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The current documention mentions explicitly that EINVAL should be
returned if the device is not available, but nx842_OF_upd_status()
always returns 0. However, nx842_probe() specifically checks for
non-ENODEV returns from nx842_of_upd() (which in turn calls
nx842_OF_upd_status()) and emits an extra error in that case. It seems
like the proper return code of a disabled device is ENODEV.
Signed-off-by: Nishanth Aravamudan <nacc@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support to the nx-842-pseries.c driver for running in little endian
mode.
The pSeries platform NX 842 driver currently only works as big endian.
This adds cpu_to_be*() and be*_to_cpu() in the appropriate places to
work in LE mode also.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace the NX842_MEM_COMPRESS define with a function that returns the
specific platform driver's required working memory size.
The common nx-842.c driver refuses to load if there is no platform
driver present, so instead of defining an approximate working memory
size that's the maximum approximate size of both platform driver's
size requirements, the platform driver can directly provide its
specific, i.e. sizeof(struct nx842_workmem), size requirements which
the 842-nx crypto compression driver will use.
This saves memory by both reducing the required size of each driver
to the specific sizeof() amount, as well as using the specific loaded
platform driver's required amount, instead of the maximum of both.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reduce the nx-842 pSeries driver minimum buffer size from 128 to 8.
Also replace the single use of IO_BUFFER_ALIGN macro with the standard
and correct DDE_BUFFER_ALIGN.
The hw sometimes rejects buffers that contain padding past the end of the
8-byte aligned section where it sees the "end" marker. With the minimum
buffer size set too high, some highly compressed buffers were being padded
and the hw was incorrectly rejecting them; this sets the minimum correctly
so there will be no incorrect padding.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change the nx-842 common driver to wait for loading of both platform
drivers, and fail loading if the platform driver pointer is not set.
Add an independent platform driver pointer, that the platform drivers
set if they find they are able to load (i.e. if they find their platform
devicetree node(s)).
The problem is currently, the main nx-842 driver will stay loaded even
if there is no platform driver and thus no possible way it can do any
compression or decompression. This allows the crypto 842-nx driver
to load even if it won't actually work. For crypto compression users
(e.g. zswap) that expect an available crypto compression driver to
actually work, this is bad. This patch fixes that, so the 842-nx crypto
compression driver won't load if it doesn't have the driver and hardware
available to perform the compression.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Simplify the pSeries NX-842 driver: do not expect incoming buffers to be
exactly page-sized; do not break up input buffers to compress smaller
blocks; do not use any internal headers in the compressed data blocks;
remove the software decompression implementation; implement the pSeries
nx842_constraints.
This changes the pSeries NX-842 driver to perform constraints-based
compression so that it only needs to compress one entire input block at a
time. This removes the need for it to split input data blocks into
multiple compressed data sections in the output buffer, and removes the
need for any extra header info in the compressed data; all that is moved
(in a later patch) into the main crypto 842 driver. Additionally, the
842 software decompression implementation is no longer needed here, as
the crypto 842 driver will use the generic software 842 decompression
function as a fallback if any hardware 842 driver fails.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add driver for NX-842 hardware on the PowerNV platform.
This allows the use of the 842 compression hardware coprocessor on
the PowerNV platform.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add "constraints" for the NX-842 driver. The constraints are used to
indicate what the current NX-842 platform driver is capable of. The
constraints tell the NX-842 user what alignment, min and max length, and
length multiple each provided buffers should conform to. These are
required because the 842 hardware requires buffers to meet specific
constraints that vary based on platform - for example, the pSeries
max length is much lower than the PowerNV max length.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add NX-842 frontend that allows using either the pSeries platform or
PowerNV platform driver (to be added by later patch) for the NX-842
hardware. Update the MAINTAINERS file to include the new filenames.
Update Kconfig files to clarify titles and descriptions, and correct
dependencies.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the entire NX-842 driver for the pSeries platform from the file
nx-842.c to nx-842-pseries.c. This is required by later patches that
add NX-842 support for the PowerNV platform.
This patch does not alter the content of the pSeries NX-842 driver at
all, it only changes the filename.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Markus Elfring