Few stack changes and lots of driver changes in this round. brcmfmac
has more activity as usual and it gets new hardware support. ath11k
improves WCN6750 support and also other smaller features. And of
course changes all over.
Note: in early September wireless tree was merged to wireless-next to
avoid some conflicts with mac80211 patches, this shouldn't cause any
problems but wanted to mention anyway.
Major changes:
mac80211
* refactoring and preparation for Wi-Fi 7 Multi-Link Operation (MLO)
feature continues
brcmfmac
* support CYW43439 SDIO chipset
* support BCM4378 on Apple platforms
* support CYW89459 PCIe chipset
rtw89
* more work to get rtw8852c supported
* P2P support
* support for enabling and disabling MSDU aggregation via nl80211
mt76
* tx status reporting improvements
ath11k
* cold boot calibration support on WCN6750
* Target Wake Time (TWT) debugfs support for STA interface
* support to connect to a non-transmit MBSSID AP profile
* enable remain-on-channel support on WCN6750
* implement SRAM dump debugfs interface
* enable threaded NAPI on all hardware
* WoW support for WCN6750
* support to provide transmit power from firmware via nl80211
* support to get power save duration for each client
* spectral scan support for 160 MHz
wcn36xx
* add SNR from a received frame as a source of system entropy
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmM3BGYRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuR3Af/XiuMlnDB6flq+M/kQHLWWvHybLw5aCJ7
l3yXhNFWxpBl2hQXtj17JSjVCYQmxbfrgRqhbNhyACO25bpymCb5QctB9X+Y7TwL
250JmuKvQfFx5oJNRfJ67dKTf3raloQYbdEMJNqySgebL+eSfrDskc9vaCLVDmCK
I994fl0Q1wUbJ6fbuIFd07ti8ay6UlSS/iakv4+nEeimabtZWJWlXBWYRpKpikdP
h9z2kPtss6yz6seaQuw6ny+qysYLi11Tp+Cued9XR3dWOOhB2X1tLHH0H02xPw76
9OJZEJHycP2juxjMfAaktHY+VX36GPLsMLUTVusH0h/Fdy3VG8YSAw==
=emmG
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.1
Few stack changes and lots of driver changes in this round. brcmfmac
has more activity as usual and it gets new hardware support. ath11k
improves WCN6750 support and also other smaller features. And of
course changes all over.
Note: in early September wireless tree was merged to wireless-next to
avoid some conflicts with mac80211 patches, this shouldn't cause any
problems but wanted to mention anyway.
Major changes:
mac80211
- refactoring and preparation for Wi-Fi 7 Multi-Link Operation (MLO)
feature continues
brcmfmac
- support CYW43439 SDIO chipset
- support BCM4378 on Apple platforms
- support CYW89459 PCIe chipset
rtw89
- more work to get rtw8852c supported
- P2P support
- support for enabling and disabling MSDU aggregation via nl80211
mt76
- tx status reporting improvements
ath11k
- cold boot calibration support on WCN6750
- Target Wake Time (TWT) debugfs support for STA interface
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- implement SRAM dump debugfs interface
- enable threaded NAPI on all hardware
- WoW support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz
wcn36xx
- add SNR from a received frame as a source of system entropy
* tag 'wireless-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (231 commits)
wifi: rtl8xxxu: Improve rtl8xxxu_queue_select
wifi: rtl8xxxu: Fix AIFS written to REG_EDCA_*_PARAM
wifi: rtl8xxxu: gen2: Enable 40 MHz channel width
wifi: rtw89: 8852b: configure DLE mem
wifi: rtw89: check DLE FIFO size with reserved size
wifi: rtw89: mac: correct register of report IMR
wifi: rtw89: pci: set power cut closed for 8852be
wifi: rtw89: pci: add to do PCI auto calibration
wifi: rtw89: 8852b: implement chip_ops::{enable,disable}_bb_rf
wifi: rtw89: add DMA busy checking bits to chip info
wifi: rtw89: mac: define DMA channel mask to avoid unsupported channels
wifi: rtw89: pci: mask out unsupported TX channels
iwlegacy: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper
ipw2x00: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
wifi: iwlwifi: Track scan_cmd allocation size explicitly
brcmfmac: Remove the call to "dtim_assoc" IOVAR
brcmfmac: increase dcmd maximum buffer size
brcmfmac: Support 89459 pcie
brcmfmac: increase default max WOWL patterns to 16
cw1200: fix incorrect check to determine if no element is found in list
...
====================
Link: https://lore.kernel.org/r/20220930150413.A7984C433D6@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add description for new property snps,clk-csr in binding file
Signed-off-by: Jianguo Zhang <jianguo.zhang@mediatek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add binding document for the ethernet on mt8188
Signed-off-by: Jianguo Zhang <jianguo.zhang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Additional TX/RX queue pairs require dedicated interrupts. Extend
binding with additional interrupts.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Within SoCs like ZynqMP, FPGA logic can be connected to different kinds
of AXI master ports. Also cache coherent AXI master ports are available.
The property "dma-coherent" is used to signal that DMA is cache
coherent.
Add "dma-coherent" property to allow the configuration of cache coherent
DMA.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The stmmac-axi-config subnode is present in multiple dwmac instance DTs,
document its content per snps,axi-config property description which is
a phandle to this subnode.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220927012449.698915-1-marex@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nlmsg_flags are full of historical baggage, inconsistencies and
strangeness. Try to document it more thoroughly. Explain the meaning
of the ECHO flag (and while at it clarify the comment in the uAPI).
Handwave a little about the NEW request flags and how they make
sense on the surface but cater to really old paradigm before commands
were a thing.
I will add more notes on how to make use of ECHO and discouragement
for reuse of flags to the kernel-side documentation.
Link: https://lore.kernel.org/r/20220927212306.823862-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ath.git patches for v6.1. Major changes:
ath11k
* cold boot calibration support on WCN6750
* Target Wake Time (TWT) debugfs support for STA interface
* support to connect to a non-transmit MBSSID AP profile
* enable remain-on-channel support on WCN6750
* implement SRAM dump debugfs interface
* enable threaded NAPI on all hardware
* WoW support for WCN6750
* support to provide transmit power from firmware via nl80211
* support to get power save duration for each client
* spectral scan support for 160 MHz
wcn36xx
* add SNR from a received frame as a source of system entropy
Add compatible string for RV1126 gmac, and constrain it to
be compatible with Synopsys dwmac 4.20a.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Signed-off-by: Anand Moon <anand@edgeble.ai>
Link: https://lore.kernel.org/r/20220920140944.2535-1-anand@edgeble.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
the rework this cycle, and one hardening for the i2c-mux core
-----BEGIN PGP SIGNATURE-----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=LqnL
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"I2C driver bugfixes for mlxbf and imx, a few documentation fixes after
the rework this cycle, and one hardening for the i2c-mux core"
* tag 'i2c-for-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mux: harden i2c_mux_alloc() against integer overflows
i2c: mlxbf: Fix frequency calculation
i2c: mlxbf: prevent stack overflow in mlxbf_i2c_smbus_start_transaction()
i2c: mlxbf: incorrect base address passed during io write
Documentation: i2c: fix references to other documents
MAINTAINERS: remove Nehal Shah from AMD MP2 I2C DRIVER
i2c: imx: If pm_runtime_get_sync() returned 1 device access is possible
This adds support for rate matching (also known as rate adaptation) to
the phy subsystem. The general idea is that the phy interface runs at
one speed, and the MAC throttles the rate at which it sends packets to
the link speed. There's a good overview of several techniques for
achieving this at [1]. This patch adds support for three: pause-frame
based (such as in Aquantia phys), CRS-based (such as in 10PASS-TS and
2BASE-TL), and open-loop-based (such as in 10GBASE-W).
This patch makes a few assumptions and a few non assumptions about the
types of rate matching available. First, it assumes that different phys
may use different forms of rate matching. Second, it assumes that phys
can use rate matching for any of their supported link speeds (e.g. if a
phy supports 10BASE-T and XGMII, then it can adapt XGMII to 10BASE-T).
Third, it does not assume that all interface modes will use the same
form of rate matching. Fourth, it does not assume that all phy devices
will support rate matching (even if some do). Relaxing or strengthening
these (non-)assumptions could result in a different API. For example, if
all interface modes were assumed to use the same form of rate matching,
then a bitmask of interface modes supportting rate matching would
suffice.
For some better visibility into the process, the current rate matching
mode is exposed as part of the ethtool ksettings. For the moment, only
read access is supported. I'm not sure what userspace might want to
configure yet (disable it altogether, disable just one mode, specify the
mode to use, etc.). For the moment, since only pause-based rate
adaptation support is added in the next few commits, rate matching can
be disabled altogether by adjusting the advertisement.
802.3 calls this feature "rate adaptation" in clause 49 (10GBASE-R) and
"rate matching" in clause 61 (10PASS-TL and 2BASE-TS). Aquantia also calls
this feature "rate adaptation". I chose "rate matching" because it is
shorter, and because Russell doesn't think "adaptation" is correct in this
context.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The syscon string was introduced because the mt7621 clock driver needs to
read some registers creating a regmap from the syscon. The bindings were
added before the clock driver was properly mainlined and at first the clock
driver was using ralink architecture dependent operations rt_memc_* defined
in 'arch/mips/include/asm/mach-ralink/ralink_regs.h'.
This string is already there on the memory controller node on mt7621.dtsi.
Add syscon as a constant string on the compatible property, now that memc
became a syscon. Update the example accordingly.
Fixes: 5278e4a181 ("dt-bindings: memory: add binding for Mediatek's MT7621 SDRAM memory controller")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Expand the description of the gpio-controller property to include the
controllable pins of the MT7530 switch.
The gpio-controller property is only used for the MT7530 switch. Therefore,
invalidate it for the MT7531 switch.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the case of muxing phy0 of the MT7530 switch, the switch and the phy
will have the same address on the mdio bus, 0. This causes the ethernet
driver to fail since devices on the mdio bus cannot share an address.
Any address can be used for the switch, therefore, change the switch
address to 0x1f.
Suggested-by: Sungbo Eo <mans0n@gorani.run>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove these old mediatek bindings which are not used.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Another set of fixes for fixes for the soc tree:
- A fix for the interrupt number on at91/lan966 ethernet PHYs
- A second round of fixes for NXP i.MX series, including a couple
of build issues, and board specific DT corrections on
TQMa8MPQL, imx8mp-venice-gw74xx and imx8mm-verdin for reliability
and partially broken functionality.
- Several fixes for Rockchip SoCs, addressing a USB issue on BPI-R2-Pro,
wakeup on Gru-Bob and reliability of high-speed SD cards, among
other minor issues.
- A fix for a long-running naming mistake that prevented the moxart mmc
driver from working at all.
- Multiple Arm SCMI firmware fixes for hardening some corner cases.
-----BEGIN PGP SIGNATURE-----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=fI2K
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Another set of fixes for fixes for the soc tree:
- A fix for the interrupt number on at91/lan966 ethernet PHYs
- A second round of fixes for NXP i.MX series, including a couple of
build issues, and board specific DT corrections on TQMa8MPQL,
imx8mp-venice-gw74xx and imx8mm-verdin for reliability and
partially broken functionality
- Several fixes for Rockchip SoCs, addressing a USB issue on
BPI-R2-Pro, wakeup on Gru-Bob and reliability of high-speed SD
cards, among other minor issues
- A fix for a long-running naming mistake that prevented the moxart
mmc driver from working at all
- Multiple Arm SCMI firmware fixes for hardening some corner cases"
* tag 'soc-fixes-6.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits)
arm64: dts: imx8mp-venice-gw74xx: fix port/phy validation
ARM: dts: lan966x: Fix the interrupt number for internal PHYs
arm64: dts: imx8mp-venice-gw74xx: fix ksz9477 cpu port
arm64: dts: imx8mp-venice-gw74xx: fix CAN STBY polarity
dt-bindings: memory-controllers: fsl,imx8m-ddrc: drop Leonard Crestez
arm64: dts: tqma8mqml: Include phy-imx8-pcie.h header
arm64: defconfig: enable ARCH_NXP
arm64: dts: imx8mp-tqma8mpql-mba8mpxl: add missing pinctrl for RTC alarm
ARM: dts: fix Moxa SDIO 'compatible', remove 'sdhci' misnomer
arm64: dts: imx8mm-verdin: extend pmic voltages
arm64: dts: rockchip: Remove 'enable-active-low' from rk3566-quartz64-a
arm64: dts: rockchip: Remove 'enable-active-low' from rk3399-puma
arm64: dts: rockchip: fix property for usb2 phy supply on rk3568-evb1-v10
arm64: dts: rockchip: fix property for usb2 phy supply on rock-3a
arm64: dts: imx8ulp: add #reset-cells for pcc
arm64: dts: tqma8mpxl-ba8mpxl: Fix button GPIOs
arm64: dts: imx8mn: remove GPU power domain reset
arm64: dts: rockchip: Set RK3399-Gru PCLK_EDP to 24 MHz
arm64: dts: imx8mm: Reverse CPLD_Dn GPIO label mapping on MX8Menlo
arm64: dts: rockchip: fix upper usb port on BPI-R2-Pro
...
A handful of awaited fixes here - revert of the FEC changes,
bluetooth fix, fixes for iwlwifi spew.
We added a warning in PHY/MDIO code which is triggering on
a couple of platforms in a false-positive-ish way. If we can't
iron that out over the week we'll drop it and re-add for 6.1.
I've added a new "follow up fixes" section for fixes to fixes
in 6.0-rcs but it may actually give the false impression that
those are problematic or that more testing time would have
caught them. So likely a one time thing.
Follow up fixes:
- nf_tables_addchain: fix nft_counters_enabled underflow
- ebtables: fix memory leak when blob is malformed
- nf_ct_ftp: fix deadlock when nat rewrite is needed
Current release - regressions:
- Revert "fec: Restart PPS after link state change"
- Revert "net: fec: Use a spinlock to guard `fep->ptp_clk_on`"
- Bluetooth: fix HCIGETDEVINFO regression
- wifi: mt76: fix 5 GHz connection regression on mt76x0/mt76x2
- mptcp: fix fwd memory accounting on coalesce
- rwlock removal fall out:
- ipmr: always call ip{,6}_mr_forward() from RCU read-side
critical section
- ipv6: fix crash when IPv6 is administratively disabled
- tcp: read multiple skbs in tcp_read_skb()
- mdio_bus_phy_resume state warning fallout:
- eth: ravb: fix PHY state warning splat during system resume
- eth: sh_eth: fix PHY state warning splat during system resume
Current release - new code bugs:
- wifi: iwlwifi: don't spam logs with NSS>2 messages
- eth: mtk_eth_soc: enable XDP support just for MT7986 SoC
Previous releases - regressions:
- bonding: fix NULL deref in bond_rr_gen_slave_id
- wifi: iwlwifi: mark IWLMEI as broken
Previous releases - always broken:
- nf_conntrack helpers:
- irc: tighten matching on DCC message
- sip: fix ct_sip_walk_headers
- osf: fix possible bogus match in nf_osf_find()
- ipvlan: fix out-of-bound bugs caused by unset skb->mac_header
- core: fix flow symmetric hash
- bonding, team: unsync device addresses on ndo_stop
- phy: micrel: fix shared interrupt on LAN8814
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=wrep
-----END PGP SIGNATURE-----
Merge tag 'net-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wifi, netfilter and can.
A handful of awaited fixes here - revert of the FEC changes, bluetooth
fix, fixes for iwlwifi spew.
We added a warning in PHY/MDIO code which is triggering on a couple of
platforms in a false-positive-ish way. If we can't iron that out over
the week we'll drop it and re-add for 6.1.
I've added a new "follow up fixes" section for fixes to fixes in
6.0-rcs but it may actually give the false impression that those are
problematic or that more testing time would have caught them. So
likely a one time thing.
Follow up fixes:
- nf_tables_addchain: fix nft_counters_enabled underflow
- ebtables: fix memory leak when blob is malformed
- nf_ct_ftp: fix deadlock when nat rewrite is needed
Current release - regressions:
- Revert "fec: Restart PPS after link state change" and the related
"net: fec: Use a spinlock to guard `fep->ptp_clk_on`"
- Bluetooth: fix HCIGETDEVINFO regression
- wifi: mt76: fix 5 GHz connection regression on mt76x0/mt76x2
- mptcp: fix fwd memory accounting on coalesce
- rwlock removal fall out:
- ipmr: always call ip{,6}_mr_forward() from RCU read-side
critical section
- ipv6: fix crash when IPv6 is administratively disabled
- tcp: read multiple skbs in tcp_read_skb()
- mdio_bus_phy_resume state warning fallout:
- eth: ravb: fix PHY state warning splat during system resume
- eth: sh_eth: fix PHY state warning splat during system resume
Current release - new code bugs:
- wifi: iwlwifi: don't spam logs with NSS>2 messages
- eth: mtk_eth_soc: enable XDP support just for MT7986 SoC
Previous releases - regressions:
- bonding: fix NULL deref in bond_rr_gen_slave_id
- wifi: iwlwifi: mark IWLMEI as broken
Previous releases - always broken:
- nf_conntrack helpers:
- irc: tighten matching on DCC message
- sip: fix ct_sip_walk_headers
- osf: fix possible bogus match in nf_osf_find()
- ipvlan: fix out-of-bound bugs caused by unset skb->mac_header
- core: fix flow symmetric hash
- bonding, team: unsync device addresses on ndo_stop
- phy: micrel: fix shared interrupt on LAN8814"
* tag 'net-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
selftests: forwarding: add shebang for sch_red.sh
bnxt: prevent skb UAF after handing over to PTP worker
net: marvell: Fix refcounting bugs in prestera_port_sfp_bind()
net: sched: fix possible refcount leak in tc_new_tfilter()
net: sunhme: Fix packet reception for len < RX_COPY_THRESHOLD
udp: Use WARN_ON_ONCE() in udp_read_skb()
selftests: bonding: cause oops in bond_rr_gen_slave_id
bonding: fix NULL deref in bond_rr_gen_slave_id
net: phy: micrel: fix shared interrupt on LAN8814
net/smc: Stop the CLC flow if no link to map buffers on
ice: Fix ice_xdp_xmit() when XDP TX queue number is not sufficient
net: atlantic: fix potential memory leak in aq_ndev_close()
can: gs_usb: gs_usb_set_phys_id(): return with error if identify is not supported
can: gs_usb: gs_can_open(): fix race dev->can.state condition
can: flexcan: flexcan_mailbox_read() fix return value for drop = true
net: sh_eth: Fix PHY state warning splat during system resume
net: ravb: Fix PHY state warning splat during system resume
netfilter: nf_ct_ftp: fix deadlock when nat rewrite is needed
netfilter: ebtables: fix memory leak when blob is malformed
netfilter: nf_tables: fix percpu memory leak at nf_tables_addchain()
...
Document the binding for the Wireless Ethernet Dispatch core on the
MT7986 ethernet driver
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, SMC uses smc->sk.sk_{rcv|snd}buf to create buffers for
send buffer and RMB. And the values of buffer size are from tcp_{w|r}mem
in clcsock.
The buffer size from TCP socket doesn't fit SMC well. Generally, buffers
are usually larger than TCP for SMC-R/-D to get higher performance, for
they are different underlay devices and paths.
So this patch unbinds buffer size from TCP, and introduces two sysctl
knobs to tune them independently. Also, these knobs are per net
namespace and work for containers.
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
SMC-R tests the viability of link by sending out TEST_LINK LLC
messages over RoCE fabric when connections on link have been
idle for a time longer than keepalive interval (testlink time).
But using tcp_keepalive_time as testlink time maybe not quite
suitable because it is default no less than two hours[1], which
is too long for single link to find peer dead. The active host
will still use peer-dead link (QP) sending messages, and can't
find out until get IB_WC_RETRY_EXC_ERR error CQEs, which takes
more time than TEST_LINK timeout (SMC_LLC_WAIT_TIME) normally.
So this patch introduces a independent sysctl for SMC-R to set
link keepalive time, in order to detect link down in time. The
default value is 30 seconds.
[1] https://www.rfc-editor.org/rfc/rfc1122#page-101
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There's no clear explanation of what VF Representors are for, their
semantics, etc., outside of vendor docs and random conference slides.
Add a document explaining Representors and defining what drivers that
implement them are expected to do.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20220905135557.39233-1-ecree@xilinx.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This toggle has been already remove by b118509076 ("netfilter: remove
nf_conntrack_helper sysctl and modparam toggles").
Remove the documentation entry for this toggle too.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
The more sockets we have in the hash table, the longer we spend looking
up the socket. While running a number of small workloads on the same
host, they penalise each other and cause performance degradation.
The root cause might be a single workload that consumes much more
resources than the others. It often happens on a cloud service where
different workloads share the same computing resource.
On EC2 c5.24xlarge instance (196 GiB memory and 524288 (1Mi / 2) ehash
entries), after running iperf3 in different netns, creating 24Mi sockets
without data transfer in the root netns causes about 10% performance
regression for the iperf3's connection.
thash_entries sockets length Gbps
524288 1 1 50.7
24Mi 48 45.1
It is basically related to the length of the list of each hash bucket.
For testing purposes to see how performance drops along the length,
I set 131072 (1Mi / 8) to thash_entries, and here's the result.
thash_entries sockets length Gbps
131072 1 1 50.7
1Mi 8 49.9
2Mi 16 48.9
4Mi 32 47.3
8Mi 64 44.6
16Mi 128 40.6
24Mi 192 36.3
32Mi 256 32.5
40Mi 320 27.0
48Mi 384 25.0
To resolve the socket lookup degradation, we introduce an optional
per-netns hash table for TCP, but it's just ehash, and we still share
the global bhash, bhash2 and lhash2.
With a smaller ehash, we can look up non-listener sockets faster and
isolate such noisy neighbours. In addition, we can reduce lock contention.
We can control the ehash size by a new sysctl knob. However, depending
on workloads, it will require very sensitive tuning, so we disable the
feature by default (net.ipv4.tcp_child_ehash_entries == 0). Moreover,
we can fall back to using the global ehash in case we fail to allocate
enough memory for a new ehash. The maximum size is 16Mi, which is large
enough that even if we have 48Mi sockets, the average list length is 3,
and regression would be less than 1%.
We can check the current ehash size by another read-only sysctl knob,
net.ipv4.tcp_ehash_entries. A negative value means the netns shares
the global ehash (per-netns ehash is disabled or failed to allocate
memory).
# dmesg | cut -d ' ' -f 5- | grep "established hash"
TCP established hash table entries: 524288 (order: 10, 4194304 bytes, vmalloc hugepage)
# sysctl net.ipv4.tcp_ehash_entries
net.ipv4.tcp_ehash_entries = 524288 # can be changed by thash_entries
# sysctl net.ipv4.tcp_child_ehash_entries
net.ipv4.tcp_child_ehash_entries = 0 # disabled by default
# ip netns add test1
# ip netns exec test1 sysctl net.ipv4.tcp_ehash_entries
net.ipv4.tcp_ehash_entries = -524288 # share the global ehash
# sysctl -w net.ipv4.tcp_child_ehash_entries=100
net.ipv4.tcp_child_ehash_entries = 100
# ip netns add test2
# ip netns exec test2 sysctl net.ipv4.tcp_ehash_entries
net.ipv4.tcp_ehash_entries = 128 # own a per-netns ehash with 2^n buckets
When more than two processes in the same netns create per-netns ehash
concurrently with different sizes, we need to guarantee the size in
one of the following ways:
1) Share the global ehash and create per-netns ehash
First, unshare() with tcp_child_ehash_entries==0. It creates dedicated
netns sysctl knobs where we can safely change tcp_child_ehash_entries
and clone()/unshare() to create a per-netns ehash.
2) Control write on sysctl by BPF
We can use BPF_PROG_TYPE_CGROUP_SYSCTL to allow/deny read/write on
sysctl knobs.
Note that the global ehash allocated at the boot time is spread over
available NUMA nodes, but inet_pernet_hashinfo_alloc() will allocate
pages for each per-netns ehash depending on the current process's NUMA
policy. By default, the allocation is done in the local node only, so
the per-netns hash table could fully reside on a random node. Thus,
depending on the NUMA policy the netns is created with and the CPU the
current thread is running on, we could see some performance differences
for highly optimised networking applications.
Note also that the default values of two sysctl knobs depend on the ehash
size and should be tuned carefully:
tcp_max_tw_buckets : tcp_child_ehash_entries / 2
tcp_max_syn_backlog : max(128, tcp_child_ehash_entries / 128)
As a bonus, we can dismantle netns faster. Currently, while destroying
netns, we call inet_twsk_purge(), which walks through the global ehash.
It can be potentially big because it can have many sockets other than
TIME_WAIT in all netns. Splitting ehash changes that situation, where
it's only necessary for inet_twsk_purge() to clean up TIME_WAIT sockets
in each netns.
With regard to this, we do not free the per-netns ehash in inet_twsk_kill()
to avoid UAF while iterating the per-netns ehash in inet_twsk_purge().
Instead, we do it in tcp_sk_exit_batch() after calling tcp_twsk_purge() to
keep it protocol-family-independent.
In the future, we could optimise ehash lookup/iteration further by removing
netns comparison for the per-netns ehash.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace the free-form description of device tree bindings for VSC9959
and VSC9953 with a YAML formatted dt-schema description. This contains
more or less the same information, but reworded to be a bit more
succint.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220913125806.524314-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add bindings for the ADIN1110/2111 MAC-PHY/SWITCH.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
DSA now supports multiple CPU ports, explain the use cases that are
covered, the new UAPI, the permitted degrees of freedom, the driver API,
and remove some old "hanging fruits".
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This is not used by the DSA dt-binding, so remove it from all examples.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The common dsa-port.yaml does this (and more) since commit 2ec2fb8331
("dt-bindings: net: dsa: make phylink bindings required for CPU/DSA
ports").
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The fact that some DSA device trees use 'label = "cpu"' for the CPU port
is nothing but blind cargo cult copying. The 'label' property was never
part of the DSA DT bindings for anything except the user ports, where it
provided a hint as to what name the created netdevs should use.
DSA does use the "cpu" port label to identify a CPU port in dsa_port_parse(),
but this is only for non-OF code paths (platform data).
The proper way to identify a CPU port is to look at whether the
'ethernet' phandle is present.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Document support for the Renesas Ethernet AVB (EtherAVB-IF) block in the
Renesas R-Car V4H (R8A779G0) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Despite the name, R-Car V3U is the first member of the R-Car Gen4
family. Hence move its compatible value to the R-Car Gen4 section.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add fsl,s32v234-fec to compatible property to support s32v234 platform.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=HdIo
-----END PGP SIGNATURE-----
Merge tag 'ib-mfd-net-pinctrl-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Lee Jones says:
====================
Immutable branch between MFD, Net and Pinctrl due for the v6.0 merge window
* tag 'ib-mfd-net-pinctrl-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: ocelot: Add support for the vsc7512 chip via spi
dt-bindings: mfd: ocelot: Add bindings for VSC7512
resource: add define macro for register address resources
pinctrl: microchip-sgpio: add ability to be used in a non-mmio configuration
pinctrl: microchip-sgpio: allow sgpio driver to be used as a module
pinctrl: ocelot: add ability to be used in a non-mmio configuration
net: mdio: mscc-miim: add ability to be used in a non-mmio configuration
mfd: ocelot: Add helper to get regmap from a resource
====================
Link: https://lore.kernel.org/r/YxrjyHcceLOFlT/c@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add required bindings to support WoW (Wake on Wireless) on
WCN6750 which is based on ath11k driver.
Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220902112520.24804-2-quic_mpubbise@quicinc.com
This binding is currently used for SDIO devices, but these chips are
also used as PCIe devices on DT platforms and may be represented in the
DT. Re-use the existing binding and add chip compatibles used by Apple
T2 and M1 platforms (the T2 ones are not known to be used in DT
platforms, but we might as well document them).
Then, add properties required for firmware selection and calibration on
M1 machines.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/E1oZDnO-0077Zy-18@rmk-PC.armlinux.org.uk
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEBsvAIBsPu6mG7thcrX5LkNig010FAmMi3OwTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCtfkuQ2KDTXafhCACHLzDn9otKPWe+w6Lt1RSuhKvhbuhO
XywQ4EBEUddOrqYarEuFiuWZMq1/PLGnkWVQotzElZR9HtkTUUetXgfsWHv39uo+
SqUK7P+DnuT9AvvUkk1ZoyVYxs8FnVWoPlcBli+zXZCjtg/XYn/2qPGJlaNPovLv
hzVokS/RVxlPIrQiNWVmkHyTb6LyLdLit802dtdaxKmQcUCgYVAiz+DwR0PwBEWs
e1K046RIfl5QejpkVq+pIXpTGu1C4m2bv1umPCts1OLtBGkHf7Dwu9HmgWPDwY91
0oJt/00NpQLgg77vnOJnv0M/TZE9cP9gp7zFh7b43qg0TpIzHhJJYJut
=UEkq
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.1-20220915' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
Sept. 15, 2022, 8:19 a.m. UTC
Hello Jakub, hello David,
this is a pull request of 23 patches for net-next/master.
the first 2 patches are by me and fix a typo in the rx-offload helper
and the flexcan driver.
Christophe JAILLET's patch cleans up the error handling in
rcar_canfd driver's probe function.
Kenneth Lee's patch converts the kvaser_usb driver from kcalloc() to
kzalloc().
Biju Das contributes 2 patches to the sja1000 driver which update the
DT bindings and support for the RZ/N1 SJA1000 CAN controller.
Jinpeng Cui provides 2 patches that remove redundant variables from
the sja1000 and kvaser_pciefd driver.
2 patches by John Whittington and me add hardware timestamp support to
the gs_usb driver.
Gustavo A. R. Silva's patch converts the etas_es58x driver to make use
of DECLARE_FLEX_ARRAY().
Krzysztof Kozlowski's patch cleans up the sja1000 DT bindings.
Dario Binacchi fixes his invalid email in the flexcan driver
documentation.
Ziyang Xuan contributes 2 patches that clean up the CAN RAW protocol.
Yang Yingliang's patch switches the flexcan driver to dev_err_probe().
The last 7 patches are by Oliver Hartkopp and add support for the next
generation of the CAN protocol: CAN with eXtended data Length (CAN XL).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to commit fe99b81948 ("docs: i2c: i2c-sysfs: fix hyperlinks"),
make other links in documentation consistent with the preferred way.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
- Update some stale binding maintainer emails
- Fix property name error in apple,aic binding
- Add missing param to of_dma_configure_id() stub
- Fix an off-by-one error in unflatten_dt_nodes()
-----BEGIN PGP SIGNATURE-----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=7H0F
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Update some stale binding maintainer emails
- Fix property name error in apple,aic binding
- Add missing param to of_dma_configure_id() stub
- Fix an off-by-one error in unflatten_dt_nodes()
* tag 'devicetree-fixes-for-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: pinctrl: qcom: drop non-working codeaurora.org emails
dt-bindings: power: qcom,rpmpd: drop non-working codeaurora.org emails
dt-bindings: apple,aic: Fix required item "apple,fiq-index" in affinity description
dt-bindings: interconnect: fsl,imx8m-noc: drop Leonard Crestez
of/device: Fix up of_dma_configure_id() stub
MAINTAINERS: Update email of Neil Armstrong
of: fdt: fix off-by-one error in unflatten_dt_nodes()
The required list used "fiq-index" instead of "apple,fiq-index"
described as property and used in the dts. Add the missing "apple,"
prefix.
Fixes: dba07ad113 ("dt-bindings: apple,aic: Add affinity description for per-cpu pseudo-interrupts")
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220909135103.98179-2-j@jannau.net
Signed-off-by: Rob Herring <robh@kernel.org>
- Fix severe regression in asus-ec-sensors driver which resulted
in EC driver failures.
- Fix various bugs in mr75203 driver
- Fix byte order bug in tps23861 driver
-----BEGIN PGP SIGNATURE-----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=4wSZ
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Fix severe regression in asus-ec-sensors driver
which resulted in EC driver failures
- Fix various bugs in mr75203 driver
- Fix byte order bug in tps23861 driver
* tag 'hwmon-for-v6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (asus-ec-sensors) autoload module via DMI data
hwmon: (mr75203) enable polling for all VM channels
hwmon: (mr75203) fix multi-channel voltage reading
hwmon: (mr75203) fix voltage equation for negative source input
hwmon: (mr75203) update pvt->v_num and vm_num to the actual number of used sensors
hwmon: (mr75203) fix VM sensor allocation when "intel,vm-map" not defined
dt-bindings: hwmon: (mr75203) fix "intel,vm-map" property to be optional
hwmon: (tps23861) fix byte order in resistance register
* A pair of device tree fixes for the Polarfire SOC.
* A fix to avoid overflowing the PMU counter array when firmware
incorrectly reports the number of supported counters, which manifests
on OpenSBI versions prior to 1.1.
-----BEGIN PGP SIGNATURE-----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=86+k
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A pair of device tree fixes for the Polarfire SOC
- A fix to avoid overflowing the PMU counter array when firmware
incorrectly reports the number of supported counters, which manifests
on OpenSBI versions prior to 1.1
* tag 'riscv-for-linus-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
perf: RISC-V: fix access beyond allocated array
riscv: dts: microchip: use an mpfs specific l2 compatible
dt-bindings: riscv: sifive-l2: add a PolarFire SoC compatible
Jakub Kicinski