Conflicts:
drivers/net/ethernet/emulex/benet/be.h
drivers/net/netconsole.c
net/bridge/br_private.h
Three mostly trivial conflicts.
The net/bridge/br_private.h conflict was a function signature (argument
addition) change overlapping with the extern removals from Joe Perches.
In drivers/net/netconsole.c we had one change adjusting a printk message
whilst another changed "printk(KERN_INFO" into "pr_info(".
Lastly, the emulex change was a new inline function addition overlapping
with Joe Perches's extern removals.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull MIPS fixes from Ralf Baechle:
"Three fixes across arch/mips with the most complex one being the GIC
interrupt fix - at nine lines still not monster. I'm confident this
are the final MIPS patches even if there should go for an rc8"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: ralink: fix return value check in rt_timer_probe()
MIPS: malta: Fix GIC interrupt offsets
MIPS: Perf: Fix 74K cache map
A vmalloc fault needs to sync up PGD/PTE entry from init_mm to current
task's "active_mm". ARC vmalloc fault handler however was using mm.
A vmalloc fault for non user task context (actually pre-userland, from
init thread's open for /dev/console) caused the handler to deref NULL mm
(for mm->pgd)
The reasons it worked so far is amazing:
1. By default (!SMP), vmalloc fault handler uses a cached value of PGD.
In SMP that MMU register is repurposed hence need for mm pointer deref.
2. In pre-3.12 SMP kernel, the problem triggering vmalloc didn't exist in
pre-userland code path - it was introduced with commit 20bafb3d23
"n_tty: Move buffers into n_tty_data"
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: Noam Camus <noamc@ezchip.com>
Cc: stable@vger.kernel.org #3.10 and 3.11
Cc: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull perf fixes from Ingo Molnar:
"Two fixes:
- Fix 'NMI handler took too long to run' false positives
[ Genuine NMI overhead speedups will come for v3.13, this commit
only fixes a measurement bug ]
- Fix perf ring-buffer missed barrier causing (rare) ring-buffer data
corruption on ppc64"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix NMI measurements
perf: Fix perf ring buffer memory ordering
In case of error, the function devm_request_and_ioremap() returns NULL
pointer not ERR_PTR(). Fix it by using devm_ioremap_resource() instead
of devm_request_and_ioremap().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: John Crispin <blogic@openwrt.org>
Cc: grant.likely@linaro.org
Cc: rob.herring@calxeda.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6098/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Merge three fixes from Andrew Morton.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
memcg: use __this_cpu_sub() to dec stats to avoid incorrect subtrahend casting
percpu: fix this_cpu_sub() subtrahend casting for unsigneds
mm/pagewalk.c: fix walk_page_range() access of wrong PTEs
this_cpu_sub() is implemented as negation and addition.
This patch casts the adjustment to the counter type before negation to
sign extend the adjustment. This helps in cases where the counter type
is wider than an unsigned adjustment. An alternative to this patch is
to declare such operations unsupported, but it seemed useful to avoid
surprises.
This patch specifically helps the following example:
unsigned int delta = 1
preempt_disable()
this_cpu_write(long_counter, 0)
this_cpu_sub(long_counter, delta)
preempt_enable()
Before this change long_counter on a 64 bit machine ends with value
0xffffffff, rather than 0xffffffffffffffff. This is because
this_cpu_sub(pcp, delta) boils down to this_cpu_add(pcp, -delta),
which is basically:
long_counter = 0 + 0xffffffff
Also apply the same cast to:
__this_cpu_sub()
__this_cpu_sub_return()
this_cpu_sub_return()
All percpu_test.ko passes, especially the following cases which
previously failed:
l -= ui_one;
__this_cpu_sub(long_counter, ui_one);
CHECK(l, long_counter, -1);
l -= ui_one;
this_cpu_sub(long_counter, ui_one);
CHECK(l, long_counter, -1);
CHECK(l, long_counter, 0xffffffffffffffff);
ul -= ui_one;
__this_cpu_sub(ulong_counter, ui_one);
CHECK(ul, ulong_counter, -1);
CHECK(ul, ulong_counter, 0xffffffffffffffff);
ul = this_cpu_sub_return(ulong_counter, ui_one);
CHECK(ul, ulong_counter, 2);
ul = __this_cpu_sub_return(ulong_counter, ui_one);
CHECK(ul, ulong_counter, 1);
Signed-off-by: Greg Thelen <gthelen@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
name, and using a better the error code.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=GwaF
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Fixes for the 3.12 debugfs problem - removing the duplicate directory
name, and using a better the error code"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: use a more sensible error number when debugfs directory creation fails
KVM: Fix modprobe failure for kvm_intel/kvm_amd
We don't cap the size of buffer from the user so we could write past the
end of the array here. Only root can write to this file.
Reported-by: Nico Golde <nico@ngolde.de>
Reported-by: Fabian Yamaguchi <fabs@goesec.de>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The GIC interrupt offsets are calculated based on the value of NR_CPUS.
However, this is wrong because NR_CPUS may or may not contain the real
number of the actual cpus present in the system. We fix that by using
the 'nr_cpu_ids' variable which contains the real number of cpus in
the system. Previously, an MT core (eg with 8 VPEs) will fail to boot if
NR_CPUS was > 8 with the following errors:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/irq/chip.c:670 __irq_set_handler+0x15c/0x164()
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.12.0-rc5-00087-gced5633 5
Stack : 00000006 00000004 00000000 00000000 00000000 00000000 807a4f36 00000053
807a0000 00000000 80173218 80565aa8 00000000 00000000 00000000 0000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 0000000
00000000 00000000 00000000 8054fd00 8054fd94 80500514 805657a7 8016eb4
807a0000 80500514 00000000 00000000 80565aa8 8079a5d8 80565766 8054fd0
...
Call Trace:
[<801098c0>] show_stack+0x64/0x7c
[<8049c6b0>] dump_stack+0x64/0x84
[<8012efc4>] warn_slowpath_common+0x84/0xb4
[<8012f00c>] warn_slowpath_null+0x18/0x24
[<80173218>] __irq_set_handler+0x15c/0x164
[<80587cf4>] arch_init_ipiirq+0x2c/0x3c
[<805880c8>] arch_init_irq+0x3c4/0x4bc
[<80588e28>] init_IRQ+0x3c/0x50
[<805847e8>] start_kernel+0x230/0x3d8
---[ end trace 4eaa2a86a8e2da26 ]---
This is now fixed and the Malta board can boot with any NR_CPUS value
which also helps supporting more processors in a single kernel binary.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6091/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The x86 specific kvm init creates a new conflicting
debugfs directory which causes modprobe issues
with kvm_intel and kvm_amd. For example,
sudo modprobe kvm_amd
modprobe: ERROR: could not insert 'kvm_amd': Bad address
The simplest fix is to just rename the directory. The following
KVM config options are set:
CONFIG_KVM_GUEST=y
CONFIG_KVM_DEBUG_FS=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
CONFIG_KVM_DEVICE_ASSIGNMENT=y
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
[Change debugfs directory name. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to Software User's Manual, the event of last-level-cache
read/write misses is mapped to even counters. Odd counters of that
event number count miss cycles.
Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6036/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
OK, so what I'm actually seeing on my WSM is that sched/clock.c is
'broken' for the purpose we're using it for.
What triggered it is that my WSM-EP is broken :-(
[ 0.001000] tsc: Fast TSC calibration using PIT
[ 0.002000] tsc: Detected 2533.715 MHz processor
[ 0.500180] TSC synchronization [CPU#0 -> CPU#6]:
[ 0.505197] Measured 3 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.004000] tsc: Marking TSC unstable due to check_tsc_sync_source failed
For some reason it consistently detects TSC skew, even though NHM+
should have a single clock domain for 'reasonable' systems.
This marks sched_clock_stable=0, which means that we do fancy stuff to
try and get a 'sane' clock. Part of this fancy stuff relies on the tick,
clearly that's gone when NOHZ=y. So for idle cpus time gets stuck, until
it either wakes up or gets kicked by another cpu.
While this is perfectly fine for the scheduler -- it only cares about
actually running stuff, and when we're running stuff we're obviously not
idle. This does somewhat break down for perf which can trigger events
just fine on an otherwise idle cpu.
So I've got NMIs get get 'measured' as taking ~1ms, which actually
don't last nearly that long:
<idle>-0 [013] d.h. 886.311970: rcu_nmi_enter <-do_nmi
...
<idle>-0 [013] d.h. 886.311997: perf_sample_event_took: HERE!!! : 1040990
So ftrace (which uses sched_clock(), not the fancy bits) only sees
~27us, but we measure ~1ms !!
Now since all this measurement stuff lives in x86 code, we can actually
fix it.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: mingo@kernel.org
Cc: dave.hansen@linux.intel.com
Cc: eranian@google.com
Cc: Don Zickus <dzickus@redhat.com>
Cc: jmario@redhat.com
Cc: acme@infradead.org
Link: http://lkml.kernel.org/r/20131017133350.GG3364@laptop.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=sopZ
-----END PGP SIGNATURE-----
Merge tag 'xtensa-next-20131015' of git://github.com/czankel/xtensa-linux
Pull Xtensa patchset from Chris Zankel:
"The main patch fixes a bug that can cause a kernel panic, and was
introduced in rc1. The other two have been discovered by a uclibc
test and 'coccinelle'"
* tag 'xtensa-next-20131015' of git://github.com/czankel/xtensa-linux:
xtensa: Cocci spatch "noderef"
xtensa: don't use alternate signal stack on threads
xtensa: fix fast_syscall_spill_registers_fixup
Since the beginning of the parisc-linux port, sometimes 64bit SMP kernels were
not able to bring up other CPUs than the monarch CPU and instead crashed the
kernel. The reason was unclear, esp. since it involved various machines (e.g.
J5600, J6750 and SuperDome). Testing showed, that those crashes didn't happened
when less than 4GB were installed, or if a 32bit Linux kernel was booted.
In the end, the fix for those SMP problems is trivial:
During the early phase of the initialization of the CPUs, including the monarch
CPU, the PDC_PSW firmware function to enable WIDE (=64bit) mode is called.
It's documented that this firmware function may clobber various registers, and
one one of those possibly clobbered registers is %cr30 which holds the task
thread info pointer.
Now, if %cr30 would always have been clobbered, then this bug would have been
detected much earlier. But lots of testing finally showed, that - at least for
%cr30 - on some machines only the upper 32bits of the 64bit register suddenly
turned zero after the firmware call.
So, after finding the root cause, the explanation for the various crashes
became clear:
- On 32bit SMP Linux kernels all upper 32bit were zero, so we didn't faced this
problem.
- Monarch CPUs in 64bit mode always booted sucessfully, because the inital task
thread info pointer was below 4GB.
- Secondary CPUs booted sucessfully on machines with less than 4GB RAM because
the upper 32bit were zero anyay.
- Secondary CPus failed to boot if we had more than 4GB RAM and the task thread
info pointer was located above the 4GB boundary.
Finally, the patch to fix this problem is trivial by saving the %cr30 register
before the firmware call and restoring it afterwards.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: <stable@vger.kernel.org> # 2.6.12+
Signed-off-by: Helge Deller <deller@gmx.de>
There's really only one bugfix in this branch, which is a fix for timers on
the integrator platform. Since Linus Walleij is resurrecting support for
the platform it seems valuable to get the fix into 3.12 even though the
regression has been around a while.
The rest are a handful of maintainers updates. If you prefer to hold those
until 3.13 then just merge the first patch on the branch which is the fix.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=7MQ0
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"There's really only one bugfix in this branch, which is a fix for
timers on the integrator platform. Since Linus Walleij is
resurrecting support for the platform it seems valuable to get the fix
into 3.12 even though the regression has been around a while.
The rest are a handful of maintainers updates. If you prefer to hold
those until 3.13 then just merge the first patch on the branch which
is the fix"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
MAINTAINERS: Add maintainers entry for Rockchip SoCs
MAINTAINERS: Tegra updates, and driver ownership
MAINTAINERS: ARM: mvebu: add Sebastian Hesselbarth
ARM: integrator: deactivate timer0 on the Integrator/CP
Conflicts:
drivers/net/usb/qmi_wwan.c
include/net/dst.h
Trivial merge conflicts, both were overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull s390 fixes from Martin Schwidefsky:
"Several last minute bug fixes.
Two of them are on the larger side for rc7, the dasd format patch for
older storage devices and the store-clock-fast patch where we have
been to optimistic with an optimization"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/time: correct use of store clock fast
s390/vmlogrdr: fix array access in vmlogrdr_open()
s390/compat,signal: fix return value of copy_siginfo_(to|from)_user32()
s390/dasd: check for availability of prefix command during format
s390/mm,kvm: fix software dirty bits vs. kvm for old machines
Pull networking fixes from David Miller:
"Sorry I let so much accumulate, I was in Buffalo and wanted a few
things to cook in my tree for a while before sending to you. Anyways,
it's a lot of little things as usual at this stage in the game"
1) Make bonding MAINTAINERS entry reflect reality, from Andy
Gospodarek.
2) Fix accidental sock_put() on timewait mini sockets, from Eric
Dumazet.
3) Fix crashes in l2tp due to mis-handling of ipv4 mapped ipv6
addresses, from François CACHEREUL.
4) Fix heap overflow in __audit_sockaddr(), from the eagle eyed Dan
Carpenter.
5) tcp_shifted_skb() doesn't take handle FINs properly, from Eric
Dumazet.
6) SFC driver bug fixes from Ben Hutchings.
7) Fix TX packet scheduling wedge after channel change in ath9k driver,
from Felix Fietkau.
8) Fix user after free in BPF JIT code, from Alexei Starovoitov.
9) Source address selection test is reversed in
__ip_route_output_key(), fix from Jiri Benc.
10) VLAN and CAN layer mis-size netlink attributes, from Marc
Kleine-Budde.
11) Fix permission checks in sysctls to use current_euid() instead of
current_uid(). From Eric W Biederman.
12) IPSEC policies can go away while a timer is still pending for them,
add appropriate ref-counting to fix, from Steffen Klassert.
13) Fix mis-programming of FDR and RMCR registers on R8A7740 sh_eth
chips, from Nguyen Hong Ky and Simon Horman.
14) MLX4 forgets to DMA unmap pages on RX, fix from Amir Vadai.
15) IPV6 GRE tunnel MTU upper limit is miscalculated, from Oussama
Ghorbel.
16) Fix typo in fq_change(), we were assigning "initial quantum" to
"quantum". From Eric Dumazet.
17) Set a more appropriate sk_pacing_rate for non-TCP sockets, otherwise
FQ packet scheduler does not pace those flows properly. Also from
Eric Dumazet.
18) rtlwifi miscalculates packet pointers, from Mark Cave-Ayland.
19) l2tp_xmit_skb() can be called from process context, not just softirq
context, so we must always make sure to BH disable around it. From
Eric Dumazet.
20) On qdisc reset, we forget to purge the RB tree of SKBs in netem
packet scheduler. From Stephen Hemminger.
21) Fix info leak in farsync WAN driver ioctl() handler, from Dan
Carpenter and Salva Peiró.
22) Fix PHY reset and other issues in dm9000 driver, from Nikita
Kiryanov and Michael Abbott.
23) When hardware can do SCTP crc32 checksums, we accidently don't
disable the csum offload when IPSEC transformations have been
applied. From Fan Du and Vlad Yasevich.
24) Tail loss probing in TCP leaves the socket in the wrong congestion
avoidance state. From Yuchung Cheng.
25) In CPSW driver, enable NAPI before interrupts are turned on, from
Markus Pargmann.
26) Integer underflow and dual-assignment in YAM hamradio driver, from
Dan Carpenter.
27) If we are going to mangle a packet in tcp_set_skb_tso_segs() we must
unclone it. This fixes various hard to track down crashes in
drivers where the SKBs ->gso_segs was changing right from underneath
the driver during TX queueing. From Eric Dumazet.
28) Fix the handling of VLAN IDs, and in particular the special IDs 0
and 4095, in the bridging layer. From Toshiaki Makita.
29) Another info leak, this time in wanxl WAN driver, from Salva Peiró.
30) Fix race in socket credential passing, from Daniel Borkmann.
31) WHen NETLABEL is disabled, we don't validate CIPSO packets properly,
from Seif Mazareeb.
32) Fix identification of fragmented frames in ipv4/ipv6 UDP
Fragmentation Offload output paths, from Jiri Pirko.
33) Virtual Function fixes in bnx2x driver from Yuval Mintz and Ariel
Elior.
34) When we removed the explicit neighbour pointer from ipv6 routes a
slight regression was introduced for users such as IPVS, xt_TEE, and
raw sockets. We mix up the users requested destination address with
the routes assigned nexthop/gateway. From Julian Anastasov and
Simon Horman.
35) Fix stack overruns in rt6_probe(), the issue is that can end up
doing two full packet xmit paths at the same time when emitting
neighbour discovery messages. From Hannes Frederic Sowa.
36) davinci_emac driver doesn't handle IFF_ALLMULTI correctly, from
Mariusz Ceier.
37) Make sure to set TCP sk_pacing_rate after the first legitimate RTT
sample, from Neal Cardwell.
38) Wrong netlink attribute passed to xfrm_replay_verify_len(), from
Steffen Klassert.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (152 commits)
ax88179_178a: Add VID:DID for Samsung USB Ethernet Adapter
ax88179_178a: Correct the RX error definition in RX header
Revert "bridge: only expire the mdb entry when query is received"
tcp: initialize passive-side sk_pacing_rate after 3WHS
davinci_emac.c: Fix IFF_ALLMULTI setup
mac802154: correct a typo in ieee802154_alloc_device() prototype
ipv6: probe routes asynchronous in rt6_probe
netfilter: nf_conntrack: fix rt6i_gateway checks for H.323 helper
ipv6: fill rt6i_gateway with nexthop address
ipv6: always prefer rt6i_gateway if present
bnx2x: Set NETIF_F_HIGHDMA unconditionally
bnx2x: Don't pretend during register dump
bnx2x: Lock DMAE when used by statistic flow
bnx2x: Prevent null pointer dereference on error flow
bnx2x: Fix config when SR-IOV and iSCSI are enabled
bnx2x: Fix Coalescing configuration
bnx2x: Unlock VF-PF channel on MAC/VLAN config error
bnx2x: Prevent an illegal pointer dereference during panic
bnx2x: Fix Maximum CoS estimation for VFs
drivers: net: cpsw: fix kernel warn during iperf test with interrupt pacing
...
The result of the store-clock-fast (STCKF) instruction is a bit fuzzy.
It can happen that the value stored on one CPU is smaller than the value
stored on another CPU, although the order of the stores is the other
way around. This can cause deltas of get_tod_clock() values to become
negative when they should not be.
We need to be more careful with store-clock-fast, this patch partially
reverts git commit e4b7b4238e666682555461fa52eecd74652f36bb "time:
always use stckf instead of stck if available". The get_tod_clock()
function now uses the store-clock-extended (STCKE) instruction.
get_tod_clock_fast() can be used if the fuzziness of store-clock-fast
is acceptable e.g. for wait loops local to a CPU.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
net_get_random_once(intrduced in the next patch) uses static_keys in
a way that they get enabled on boot-up instead of replaced with an
ideal_nop. So check for default_nop on initial enabling.
Other architectures don't check for this.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: x86@kernel.org
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Latest udev requires that DEVTMPFS and DEVTMPFS_MOUNT are enabled, else
initrd will fail to find root filesystem. Enable missing BLK_DEV_INITRD
for B180 and C3000 machines.
Signed-off-by: Helge Deller <deller@gmx.de>
This reverts commit 320c90be7b.
Christoph Hellwig <hch@infradead.org> commented:
This one shouldn't go in - Geert sent it a bit prematurely, as Lustre
shouldn't use it just to reimplement core VM functionality (which it
shouldn't use either, but that's a separate story).
Signed-off-by: Helge Deller <deller@gmx.de>
sizeof when applied to a pointer typed expression gives the size of the
pointer.
Found by coccinelle spatch "misc/noderef.cocci"
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Chris Zankel <chris@zankel.net>
One bug fix and three reverts. The reverts back out the slightly
controversial feeding the entire device tree into the random pool and
the reserved-memory binding which isn't fully baked yet. Expect the
reserved-memory patches at least to resurface for v3.13. The bug fixes
removes a scary but harmless warning on SPARC that was introduced in the
v3.12 merge window. v3.13 will contain a proper fix that makes the new
code work on SPARC.
On the plus side, the diffstat looks *awesome*. I love removing lines of code.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJSXbO9AAoJEJZcAETA+ZUxuH4IAI/KF71fq0/O7en7GHo6ofcZ
3nA3fUyYpnjehaqmKDXxix4TUgKTYU1ZP6tn8VfM6fn0QthR2YXPYAqiIaRot3ab
arCPvJ9N52CU04Ug8dqMPEuFlSqRfTYc0EVPTbdgv8GYWX+rjP4qmOWS13exorai
hJSRFmbyvwOVvRAl7KtkBPEZ3ri40mfkTrMs61v55GajhaZFyoTQgMMNhboUskI7
qztWiecw1stlvbfQEoN+BA11ohp5kDf4d5jeTCMNFx81liBbZHYfwWbmwYPCH7/z
6s4gX6PQeCuygdhQK65q1tYebTmRbFxkuf8P/tO7lEpmR3fKIVBr+oMJff0q9ww=
=8W6e
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux
Pull device tree fixes and reverts from Grant Likely:
"One bug fix and three reverts. The reverts back out the slightly
controversial feeding the entire device tree into the random pool and
the reserved-memory binding which isn't fully baked yet. Expect the
reserved-memory patches at least to resurface for v3.13.
The bug fixes removes a scary but harmless warning on SPARC that was
introduced in the v3.12 merge window. v3.13 will contain a proper fix
that makes the new code work on SPARC.
On the plus side, the diffstat looks *awesome*. I love removing lines
of code"
* tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux:
Revert "drivers: of: add initialization code for dma reserved memory"
Revert "ARM: init: add support for reserved memory defined by device tree"
Revert "of: Feed entire flattened device tree into the random pool"
of: fix unnecessary warning on missing /cpus node
Pull DMA-mapping fix from Marek Szyprowski:
"A bugfix for the IOMMU-based implementation of dma-mapping subsystem
for ARM architecture"
* 'fixes-for-v3.12' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
ARM: dma-mapping: Always pass proper prot flags to iommu_map()
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=wJOk
-----END PGP SIGNATURE-----
Merge tag 'stable/for-linus-3.12-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull Xen fixes from Stefano Stabellini:
"A small fix for Xen on x86_32 and a build fix for xen-tpmfront on
arm64"
* tag 'stable/for-linus-3.12-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: Fix possible user space selector corruption
tpm: xen-tpmfront: fix missing declaration of xen_domain
According to create_thread(3): "The new thread does not inherit the creating
thread's alternate signal stack". Since commit f9a3879a (Fix sigaltstack
corruption among cloned threads), current->sas_ss_size is set to 0 for cloned
processes sharing VM with their parent. Don't use the (nonexistent) alternate
signal stack in this case. This has been broken since commit 29c4dfd9 ([XTENSA]
Remove non-rt signal handling).
Fixes the SA_ONSTACK part of the nptl/tst-cancel20 test from uClibc.
Cc: <stable@vger.kernel.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
fast_syscall_spill_registers_fixup was not correctly updated by the
'keep a3 and excsave1 on entry to exception handlers' patch: it doesn't
preserve a3 that it gets on entry, breaking _spill_registers in case of
page fault on stack during register spilling, leading to unhandled
exception in kernel mode.
Preserve a3 by saving it in the original _spill_registers stack frame's
a3 during exception handling and restoring it afterwards.
Also fix comments and function bounds annotations.
Reported-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Chris Zankel <chris@zankel.net>
The return value of copy_siginfo_(to|from)_user32() gets passed to
user space, however we do not convert a positive return value from
copy_(to|from)_user to -EFAULT.
Therefore these functions (and the calling system calls) my incorrectly
return a positive number (bytes not copied) instead of -EFAULT.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
For machines without enhanced supression on protection the software
dirty bit code forces the pte dirty bit and clears the page protection
bit in pgste_set_pte. This is done for all pte types, the check for
present ptes is missing. As a result swap ptes and other not-present
ptes can get corrupted.
Add a check for the _PAGE_PRESENT bit to pgste_set_pte before modifying
the pte value.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
We use jump label to enable pv-spinlock. With the changes in (442e0973e9
Merge branch 'x86/jumplabel'), the jump label behaviour has changed
that would result in eventual hang of the VM since we would end up in a
situation where slow path locks would halt the vcpus but we will not be
able to wakeup the vcpu by lock releaser using unlock kick.
Similar problem in Xen and more detailed description is available in
a945928ea2 (xen: Do not enable spinlocks before jump_label_init()
has executed)
This patch splits kvm_spinlock_init to separate jump label changes with
pvops patching and also make jump label enabling after jump_label_init().
Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
This reverts commit 10bcdfb8ba. There is
no consensus on the bindings for the reserved memory, so the code for
handing it will be reverted.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
The UV3 hub revision ID is different than expected. The first
revision was supposed to start at 1 but instead will start at 0.
Signed-off-by: Russ Anderson <rja@sgi.com>
Cc: <stable@kernel.org> # v3.9, v3.10, v3.11
Link: http://lkml.kernel.org/r/20131014161733.GA6274@sgi.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull ARM fixes from Russell King:
"Some more ARM fixes, nothing particularly major here. The biggest
change is to fix the SMP_ON_UP code so that it works with TI's Aegis
cores"
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
ARM: 7851/1: check for number of arguments in syscall_get/set_arguments()
ARM: 7846/1: Update SMP_ON_UP code to detect A9MPCore with 1 CPU devices
ARM: 7845/1: sharpsl_param.c: fix invalid memory access for pxa devices
ARM: 7843/1: drop asm/types.h from generic-y
ARM: 7842/1: MCPM: don't explode if invoked without being initialized first
I have a randconfig here which has enabled only
CONFIG_MICROCODE=y
CONFIG_MICROCODE_OLD_INTERFACE=y
with both
# CONFIG_MICROCODE_INTEL is not set
# CONFIG_MICROCODE_AMD is not set
off. Which makes building the microcode functionality a little
pointless. Don't do that in such cases then.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1381682189-14470-1-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This fixes a long-standing Integrator/CP regression from
commit 870e2928cf
"ARM: integrator-cp: convert use CLKSRC_OF for timer init"
When this code was introduced, the both aliases pointing the
system to use timer1 as primary (clocksource) and timer2
as secondary (clockevent) was ignored, and the system would
simply use the first two timers found as clocksource and
clockevent.
However this made the system timeline accelerate by a
factor x25, as it turns out that the way the clocking
actually works (totally undocumented and found after some
trial-and-error) is that timer0 runs @ 25MHz and timer1
and timer2 runs @ 1MHz. Presumably this divider setting
is a boot-on default and configurable albeit the way to
configure it is not documented.
So as a quick fix to the problem, let's mark timer0 as
disabled, so the code will chose timer1 and timer2 as it
used to.
This also deletes the two aliases for the primary and
secondary timer as they have been superceded by the
auto-selection
Cc: stable@vger.kernel.org
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
In ftrace_syscall_enter(),
syscall_get_arguments(..., 0, n, ...)
if (i == 0) { <handle ORIG_r0> ...; n--;}
memcpy(..., n * sizeof(args[0]));
If 'number of arguments(n)' is zero and 'argument index(i)' is also zero in
syscall_get_arguments(), none of arguments should be copied by memcpy().
Otherwise 'n--' can be a big positive number and unexpected amount of data
will be copied. Tracing system calls which take no argument, say sync(void),
may hit this case and eventually make the system corrupted.
This patch fixes the issue both in syscall_get_arguments() and
syscall_set_arguments().
Cc: <stable@vger.kernel.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
A small batch of fixes this week, mostly OMAP related. Nothing stands out
as particularly controversial.
Also a fix for a 3.12-rc1 timer regression for Exynos platforms, including
the Chromebooks.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=HpMx
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A small batch of fixes this week, mostly OMAP related. Nothing stands
out as particularly controversial.
Also a fix for a 3.12-rc1 timer regression for Exynos platforms,
including the Chromebooks"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: exynos: dts: Update 5250 arch timer node with clock frequency
ARM: OMAP2: RX-51: Add missing max_current to rx51_lp5523_led_config
ARM: mach-omap2: board-generic: fix undefined symbol
ARM: dts: Fix pinctrl mask for omap3
ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree
ARM: OMAP2: gpmc-onenand: fix sync mode setup with DT
Without the "clock-frequency" property in arch timer node, could able
to see the below crash dump.
[<c0014e28>] (unwind_backtrace+0x0/0xf4) from [<c0011808>] (show_stack+0x10/0x14)
[<c0011808>] (show_stack+0x10/0x14) from [<c036ac1c>] (dump_stack+0x7c/0xb0)
[<c036ac1c>] (dump_stack+0x7c/0xb0) from [<c01ab760>] (Ldiv0_64+0x8/0x18)
[<c01ab760>] (Ldiv0_64+0x8/0x18) from [<c0062f60>] (clockevents_config.part.2+0x1c/0x74)
[<c0062f60>] (clockevents_config.part.2+0x1c/0x74) from [<c0062fd8>] (clockevents_config_and_register+0x20/0x2c)
[<c0062fd8>] (clockevents_config_and_register+0x20/0x2c) from [<c02b8e8c>] (arch_timer_setup+0xa8/0x134)
[<c02b8e8c>] (arch_timer_setup+0xa8/0x134) from [<c04b47b4>] (arch_timer_init+0x1f4/0x24c)
[<c04b47b4>] (arch_timer_init+0x1f4/0x24c) from [<c04b40d8>] (clocksource_of_init+0x34/0x58)
[<c04b40d8>] (clocksource_of_init+0x34/0x58) from [<c049ed8c>] (time_init+0x20/0x2c)
[<c049ed8c>] (time_init+0x20/0x2c) from [<c049b95c>] (start_kernel+0x1e0/0x39c)
THis is because the Exynos u-boot, for example on the Chromebooks, doesn't set
up the CNTFRQ register as expected by arch_timer. Instead, we have to specify
the frequency in the device tree like this.
Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com>
[olof: Changed subject, added comment, elaborated on commit message]
Signed-off-by: Olof Johansson <olof@lixom.net>
noticed now that people are actually using the device tree
based booting for omap3.
Also one regression fix for timer compile for dra7xx when
omap5 is not selected, and a LED regression fix for n900.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=yVzH
-----END PGP SIGNATURE-----
Merge tag 'fixes-against-v3.12-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
From Tony Lindgren:
Few fixes for omap3 related hangs and errors that people have
noticed now that people are actually using the device tree
based booting for omap3.
Also one regression fix for timer compile for dra7xx when
omap5 is not selected, and a LED regression fix for n900.
* tag 'fixes-against-v3.12-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2: RX-51: Add missing max_current to rx51_lp5523_led_config
ARM: mach-omap2: board-generic: fix undefined symbol
ARM: dts: Fix pinctrl mask for omap3
ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree
ARM: OMAP2: gpmc-onenand: fix sync mode setup with DT
Signed-off-by: Olof Johansson <olof@lixom.net>
The attached change defers the initialization of the variables tsk, mm
and flags until they are needed. As a result, the code won't crash if a
kernel probe is done with a corrupt context and the code will be better
optimized.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Running an "echo t > /proc/sysrq-trigger" crashes the parisc kernel. The
problem is, that in print_worker_info() we try to read the workqueue info via
the probe_kernel_read() functions which use pagefault_disable() to avoid
crashes like this:
probe_kernel_read(&pwq, &worker->current_pwq, sizeof(pwq));
probe_kernel_read(&wq, &pwq->wq, sizeof(wq));
probe_kernel_read(name, wq->name, sizeof(name) - 1);
The problem here is, that the first probe_kernel_read(&pwq) might return zero
in pwq and as such the following probe_kernel_reads() try to access contents of
the page zero which is read protected and generate a kernel segfault.
With this patch we fix the interruption handler to call parisc_terminate()
directly only if pagefault_disable() was not called (in which case
preempt_count()==0). Otherwise we hand over to the pagefault handler which
will try to look up the faulting address in the fixup tables.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v3.0+
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Commit 9a46ad6d6d "smp: make smp_call_function_many() use logic
similar to smp_call_function_single()" has unified the way to handle
single and multiple cross-CPU function calls. Now only one interrupt
is needed for architecture specific code to support generic SMP function
call interfaces, so kill the redundant single function call interrupt.
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Cc: Jiang Liu <liuj97@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Andrey Vagin