Pull networking fixes from David Miller:
1) Disable RISCV BPF JIT builds when !MMU, from Björn Töpel.
2) nf_tables leaves dangling pointer after free, fix from Eric Dumazet.
3) Out of boundary write in __xsk_rcv_memcpy(), fix from Li RongQing.
4) Adjust icmp6 message source address selection when routes have a
preferred source address set, from Tim Stallard.
5) Be sure to validate HSR protocol version when creating new links,
from Taehee Yoo.
6) CAP_NET_ADMIN should be sufficient to manage l2tp tunnels even in
non-initial namespaces, from Michael Weiß.
7) Missing release firmware call in mlx5, from Eran Ben Elisha.
8) Fix variable type in macsec_changelink(), caught by KASAN. Fix from
Taehee Yoo.
9) Fix pause frame negotiation in marvell phy driver, from Clemens
Gruber.
10) Record RX queue early enough in tun packet paths such that XDP
programs will see the correct RX queue index, from Gilberto Bertin.
11) Fix double unlock in mptcp, from Florian Westphal.
12) Fix offset overflow in ARM bpf JIT, from Luke Nelson.
13) marvell10g needs to soft reset PHY when coming out of low power
mode, from Russell King.
14) Fix MTU setting regression in stmmac for some chip types, from
Florian Fainelli.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits)
amd-xgbe: Use __napi_schedule() in BH context
mISDN: make dmril and dmrim static
net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes
net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode
tipc: fix incorrect increasing of link window
Documentation: Fix tcp_challenge_ack_limit default value
net: tulip: make early_486_chipsets static
dt-bindings: net: ethernet-phy: add desciption for ethernet-phy-id1234.d400
ipv6: remove redundant assignment to variable err
net/rds: Use ERR_PTR for rds_message_alloc_sgs()
net: mscc: ocelot: fix untagged packet drops when enslaving to vlan aware bridge
selftests/bpf: Check for correct program attach/detach in xdp_attach test
libbpf: Fix type of old_fd in bpf_xdp_set_link_opts
libbpf: Always specify expected_attach_type on program load if supported
xsk: Add missing check on user supplied headroom size
mac80211: fix channel switch trigger from unknown mesh peer
mac80211: fix race in ieee80211_register_hw()
net: marvell10g: soft-reset the PHY when coming out of low power
net: marvell10g: report firmware version
net/cxgb4: Check the return from t4_query_params properly
...
David Ahern noticed that there was a bug in the EXPECTED_FD code so
programs did not get detached properly when that parameter was supplied.
This case was not included in the xdp_attach tests; so let's add it to be
sure that such a bug does not sneak back in down.
Fixes: 87854a0b57 ("selftests/bpf: Add tests for attaching XDP programs")
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200414145025.182163-2-toke@redhat.com
The 'old_fd' parameter used for atomic replacement of XDP programs is
supposed to be an FD, but was left as a u32 from an earlier iteration of
the patch that added it. It was converted to an int when read, so things
worked correctly even with negative values, but better change the
definition to correctly reflect the intention.
Fixes: bd5ca3ef93 ("libbpf: Add function to set link XDP fd while specifying old program")
Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200414145025.182163-1-toke@redhat.com
For some types of BPF programs that utilize expected_attach_type, libbpf won't
set load_attr.expected_attach_type, even if expected_attach_type is known from
section definition. This was done to preserve backwards compatibility with old
kernels that didn't recognize expected_attach_type attribute yet (which was
added in 5e43f899b0 ("bpf: Check attach type at prog load time"). But this
is problematic for some BPF programs that utilize newer features that require
kernel to know specific expected_attach_type (e.g., extended set of return
codes for cgroup_skb/egress programs).
This patch makes libbpf specify expected_attach_type by default, but also
detect support for this field in kernel and not set it during program load.
This allows to have a good metadata for bpf_program
(e.g., bpf_program__get_extected_attach_type()), but still work with old
kernels (for cases where it can work at all).
Additionally, due to expected_attach_type being always set for recognized
program types, bpf_program__attach_cgroup doesn't have to do extra checks to
determine correct attach type, so remove that additional logic.
Also adjust section_names selftest to account for this change.
More detailed discussion can be found in [0].
[0] https://lore.kernel.org/bpf/20200412003604.GA15986@rdna-mbp.dhcp.thefacebook.com/
Fixes: 5cf1e91456 ("bpf: cgroup inet skb programs can return 0 to 3")
Fixes: 5e43f899b0 ("bpf: Check attach type at prog load time")
Reported-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrey Ignatov <rdna@fb.com>
Link: https://lore.kernel.org/bpf/20200414182645.1368174-1-andriin@fb.com
In commit 65c9362859 ("bpftool: Add struct_ops support") a new
type of command named struct_ops has been added. This command requires
a kernel with CONFIG_DEBUG_INFO_BTF=y set and for retrieving BTF info
in bpftool, the helper get_btf_vmlinux() is used.
When running this command on kernel without BTF debug info, this will
lead to 'btf_vmlinux' variable being an invalid(error) pointer. And by
this, btf_free() causes a segfault when executing 'bpftool struct_ops'.
This commit adds pointer validation with IS_ERR not to free invalid
pointer, and this will fix the segfault issue.
Fixes: 65c9362859 ("bpftool: Add struct_ops support")
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200410020612.2930667-1-danieltimlee@gmail.com
Test that frozen and mmap()'ed BPF map can't be mprotect()'ed as writable or
executable memory. Also validate that "downgrading" from writable to read-only
doesn't screw up internal writable count accounting for the purposes of map
freezing.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200410202613.3679837-2-andriin@fb.com
- raise minimum supported binutils version to 2.23
- remove old CONFIG_AS_* macros that we know binutils >= 2.23 supports
- move remaining CONFIG_AS_* tests to Kconfig from Makefile
- enable -Wtautological-compare warnings to catch more issues
- do not support GCC plugins for GCC <= 4.7
- fix various breakages of 'make xconfig'
- include the linker version used for linking the kernel into
LINUX_COMPILER, which is used for the banner, and also exposed to
/proc/version
- link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y,
which allows us to remove the lib-ksyms.o workaround, and to
solve the last known issue of the LLVM linker
- add dummy tools in scripts/dummy-tools/ to enable all compiler
tests in Kconfig, which will be useful for distro maintainers
- support the single switch, LLVM=1 to use Clang and all LLVM utilities
instead of GCC and Binutils.
- support LLVM_IAS=1 to enable the integrated assembler, which is still
experimental
-----BEGIN PGP SIGNATURE-----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=jpyF
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- raise minimum supported binutils version to 2.23
- remove old CONFIG_AS_* macros that we know binutils >= 2.23 supports
- move remaining CONFIG_AS_* tests to Kconfig from Makefile
- enable -Wtautological-compare warnings to catch more issues
- do not support GCC plugins for GCC <= 4.7
- fix various breakages of 'make xconfig'
- include the linker version used for linking the kernel into
LINUX_COMPILER, which is used for the banner, and also exposed to
/proc/version
- link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y, which
allows us to remove the lib-ksyms.o workaround, and to solve the last
known issue of the LLVM linker
- add dummy tools in scripts/dummy-tools/ to enable all compiler tests
in Kconfig, which will be useful for distro maintainers
- support the single switch, LLVM=1 to use Clang and all LLVM utilities
instead of GCC and Binutils.
- support LLVM_IAS=1 to enable the integrated assembler, which is still
experimental
* tag 'kbuild-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (36 commits)
kbuild: fix comment about missing include guard detection
kbuild: support LLVM=1 to switch the default tools to Clang/LLVM
kbuild: replace AS=clang with LLVM_IAS=1
kbuild: add dummy toolchains to enable all cc-option etc. in Kconfig
kbuild: link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y
MIPS: fw: arc: add __weak to prom_meminit and prom_free_prom_memory
kbuild: remove -I$(srctree)/tools/include from scripts/Makefile
kbuild: do not pass $(KBUILD_CFLAGS) to scripts/mkcompile_h
Documentation/llvm: fix the name of llvm-size
kbuild: mkcompile_h: Include $LD version in /proc/version
kconfig: qconf: Fix a few alignment issues
kconfig: qconf: remove some old bogus TODOs
kconfig: qconf: fix support for the split view mode
kconfig: qconf: fix the content of the main widget
kconfig: qconf: Change title for the item window
kconfig: qconf: clean deprecated warnings
gcc-plugins: drop support for GCC <= 4.7
kbuild: Enable -Wtautological-compare
x86: update AS_* macros to binutils >=2.23, supporting ADX and AVX2
crypto: x86 - clean up poly1305-x86_64-cryptogams.S by 'make clean'
...
For security reasons I stopped using gmail account and kernel address is
now up-to-date alias to my personal address.
People periodically send me emails to address which they found in source
code of drivers, so this change reflects state where people can contact
me.
[ Added .mailmap entry as per Joe Perches - Linus ]
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joe Perches <joe@perches.com>
Link: http://lkml.kernel.org/r/20200307104237.8199-1-pali@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Test that request_module() fails with -ENOENT when
/proc/sys/kernel/modprobe contains (a) a nonexistent path, and (b) an
empty path.
Case (b) is a regression test for the patch "kmod: make request_module()
return an error when autoloading is disabled".
Tested with 'kmod.sh -t 0010 && kmod.sh -t 0011', and also simply with
'kmod.sh' to run all kmod tests.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: NeilBrown <neilb@suse.com>
Link: http://lkml.kernel.org/r/20200312202552.241885-5-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
get_test_count() and get_test_enabled() were broken for test numbers
above 9 due to awk interpreting a field specification like '$0010' as
octal rather than decimal. Fix it by stripping the leading zeroes.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: NeilBrown <neilb@suse.com>
Link: http://lkml.kernel.org/r/20200318230515.171692-5-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel Borkmann says:
====================
pull-request: bpf 2020-04-10
The following pull-request contains BPF updates for your *net* tree.
We've added 13 non-merge commits during the last 7 day(s) which contain
a total of 13 files changed, 137 insertions(+), 43 deletions(-).
The main changes are:
1) JIT code emission fixes for riscv and arm32, from Luke Nelson and Xi Wang.
2) Disable vmlinux BTF info if GCC_PLUGIN_RANDSTRUCT is used, from Slava Bacherikov.
3) Fix oob write in AF_XDP when meta data is used, from Li RongQing.
4) Fix bpf_get_link_xdp_id() handling on single prog when flags are specified,
from Andrey Ignatov.
5) Fix sk_assign() BPF helper for request sockets that can have sk_reuseport
field uninitialized, from Joe Stringer.
6) Fix mprotect() test case for the BPF LSM, from KP Singh.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
- A fix for a crash in machine check handling on pseries (ie. guests)
- A small series to make it possible to disable CONFIG_COMPAT, and turn it off
by default for ppc64le where it's not used.
- A few other miscellaneous fixes and small improvements.
Thanks to:
Alexey Kardashevskiy, Anju T Sudhakar, Arnd Bergmann, Christophe Leroy, Dan
Carpenter, Ganesh Goudar, Geert Uytterhoeven, Geoff Levand, Mahesh Salgaonkar,
Markus Elfring, Michal Suchanek, Nicholas Piggin, Stephen Boyd, Wen Xiong.
-----BEGIN PGP SIGNATURE-----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=72sb
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc updates from Michael Ellerman:
"The bulk of this is the series to make CONFIG_COMPAT user-selectable,
it's been around for a long time but was blocked behind the
syscall-in-C series.
Plus there's also a few fixes and other minor things.
Summary:
- A fix for a crash in machine check handling on pseries (ie. guests)
- A small series to make it possible to disable CONFIG_COMPAT, and
turn it off by default for ppc64le where it's not used.
- A few other miscellaneous fixes and small improvements.
Thanks to: Alexey Kardashevskiy, Anju T Sudhakar, Arnd Bergmann,
Christophe Leroy, Dan Carpenter, Ganesh Goudar, Geert Uytterhoeven,
Geoff Levand, Mahesh Salgaonkar, Markus Elfring, Michal Suchanek,
Nicholas Piggin, Stephen Boyd, Wen Xiong"
* tag 'powerpc-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Always build the tm-poison test 64-bit
powerpc: Improve ppc_save_regs()
Revert "powerpc/64: irq_work avoid interrupt when called with hardware irqs enabled"
powerpc/time: Replace <linux/clk-provider.h> by <linux/of_clk.h>
powerpc/pseries/ddw: Extend upper limit for huge DMA window for persistent memory
powerpc/perf: split callchain.c by bitness
powerpc/64: Make COMPAT user-selectable disabled on littleendian by default.
powerpc/64: make buildable without CONFIG_COMPAT
powerpc/perf: consolidate valid_user_sp -> invalid_user_sp
powerpc/perf: consolidate read_user_stack_32
powerpc: move common register copy functions from signal_32.c to signal.c
powerpc: Add back __ARCH_WANT_SYS_LLSEEK macro
powerpc/ps3: Set CONFIG_UEVENT_HELPER=y in ps3_defconfig
powerpc/ps3: Remove an unneeded NULL check
powerpc/ps3: Remove duplicate error message
powerpc/powernv: Re-enable imc trace-mode in kernel
powerpc/perf: Implement a global lock to avoid races between trace, core and thread imc events.
powerpc/pseries: Fix MCE handling on pseries
selftests/eeh: Skip ahci adapters
powerpc/64s: Fix doorbell wakeup msgclr optimisation
- Add support for region alignment configuration and enforcement to
fix compatibility across architectures and PowerPC page size
configurations.
- Introduce 'zero_page_range' as a dax operation. This facilitates
filesystem-dax operation without a block-device.
- Introduce phys_to_target_node() to facilitate drivers that want to
know resulting numa node if a given reserved address range was
onlined.
- Advertise a persistence-domain for of_pmem and papr_scm. The
persistence domain indicates where cpu-store cycles need to reach in
the platform-memory subsystem before the platform will consider them
power-fail protected.
- Promote numa_map_to_online_node() to a cross-kernel generic facility.
- Save x86 numa information to allow for node-id lookups for reserved
memory ranges, deploy that capability for the e820-pmem driver.
- Pick up some miscellaneous minor fixes, that missed v5.6-final,
including a some smatch reports in the ioctl path and some unit test
compilation fixups.
- Fixup some flexible-array declarations.
-----BEGIN PGP SIGNATURE-----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=sY4N
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm and dax updates from Dan Williams:
"There were multiple touches outside of drivers/nvdimm/ this round to
add cross arch compatibility to the devm_memremap_pages() interface,
enhance numa information for persistent memory ranges, and add a
zero_page_range() dax operation.
This cycle I switched from the patchwork api to Konstantin's b4 script
for collecting tags (from x86, PowerPC, filesystem, and device-mapper
folks), and everything looks to have gone ok there. This has all
appeared in -next with no reported issues.
Summary:
- Add support for region alignment configuration and enforcement to
fix compatibility across architectures and PowerPC page size
configurations.
- Introduce 'zero_page_range' as a dax operation. This facilitates
filesystem-dax operation without a block-device.
- Introduce phys_to_target_node() to facilitate drivers that want to
know resulting numa node if a given reserved address range was
onlined.
- Advertise a persistence-domain for of_pmem and papr_scm. The
persistence domain indicates where cpu-store cycles need to reach
in the platform-memory subsystem before the platform will consider
them power-fail protected.
- Promote numa_map_to_online_node() to a cross-kernel generic
facility.
- Save x86 numa information to allow for node-id lookups for reserved
memory ranges, deploy that capability for the e820-pmem driver.
- Pick up some miscellaneous minor fixes, that missed v5.6-final,
including a some smatch reports in the ioctl path and some unit
test compilation fixups.
- Fixup some flexible-array declarations"
* tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (29 commits)
dax: Move mandatory ->zero_page_range() check in alloc_dax()
dax,iomap: Add helper dax_iomap_zero() to zero a range
dax: Use new dax zero page method for zeroing a page
dm,dax: Add dax zero_page_range operation
s390,dcssblk,dax: Add dax zero_page_range operation to dcssblk driver
dax, pmem: Add a dax operation zero_page_range
pmem: Add functions for reading/writing page to/from pmem
libnvdimm: Update persistence domain value for of_pmem and papr_scm device
tools/test/nvdimm: Fix out of tree build
libnvdimm/region: Fix build error
libnvdimm/region: Replace zero-length array with flexible-array member
libnvdimm/label: Replace zero-length array with flexible-array member
ACPI: NFIT: Replace zero-length array with flexible-array member
libnvdimm/region: Introduce an 'align' attribute
libnvdimm/region: Introduce NDD_LABELING
libnvdimm/namespace: Enforce memremap_compat_align()
libnvdimm/pfn: Prevent raw mode fallback if pfn-infoblock valid
libnvdimm: Out of bounds read in __nd_ioctl()
acpi/nfit: improve bounds checking for 'func'
mm/memremap_pages: Introduce memremap_compat_align()
...
As Documentation/kbuild/llvm.rst implies, building the kernel with a
full set of LLVM tools gets very verbose and unwieldy.
Provide a single switch LLVM=1 to use Clang and LLVM tools instead
of GCC and Binutils. You can pass it from the command line or as an
environment variable.
Please note LLVM=1 does not turn on the integrated assembler. You need
to pass LLVM_IAS=1 to use it. When the upstream kernel is ready for the
integrated assembler, I think we can make it default.
We discussed what we need, and we agreed to go with a simple boolean
flag that switches both target and host tools:
https://lkml.org/lkml/2020/3/28/494https://lkml.org/lkml/2020/4/3/43
Some items discussed, but not adopted:
- LLVM_DIR
When multiple versions of LLVM are installed, I just thought supporting
LLVM_DIR=/path/to/my/llvm/bin/ might be useful.
CC = $(LLVM_DIR)clang
LD = $(LLVM_DIR)ld.lld
...
However, we can handle this by modifying PATH. So, we decided to not do
this.
- LLVM_SUFFIX
Some distributions (e.g. Debian) package specific versions of LLVM with
naming conventions that use the version as a suffix.
CC = clang$(LLVM_SUFFIX)
LD = ld.lld(LLVM_SUFFIX)
...
will allow a user to pass LLVM_SUFFIX=-11 to use clang-11 etc.,
but the suffixed versions in /usr/bin/ are symlinks to binaries in
/usr/lib/llvm-#/bin/, so this can also be handled by PATH.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com> # build
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Some bug fixes.
The new vdpa subsystem with two first drivers.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl6MS7wPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpGp8H/2H49Gya1cfVbGU13qgmBSQqQXC8hS3iNLuG
ltRgU+jafJT//kvkdm3/DUzfK3eRUWUfqZLKEbAQDtMY0OGHi/KGEBYVLDde7Zxt
Lg4VnwBhkYDR/f01ZZDbHxzj9JAr83i28nILjLIqf3a1BX4zf203+ZE0/JM8a7wL
dOPoH7NAfyz5ul2F67bR1IOF8vC6TidpavzR2+HC/MocHYXb6Bgfvt+i4EcrfuMf
9lnBfajgklKr9sNJniwvvR1pWVg+YyG3VeC6T8tIC/xzbCmIoNT+5b3q2XPSIHq1
EuQTeXH9CBFXS0qcFlq2ktR1xd1Lx95hKwZpqLwLFDmfgjhV2QU=
=/84P
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- Some bug fixes
- The new vdpa subsystem with two first drivers
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio-balloon: Revert "virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM"
vdpa: move to drivers/vdpa
virtio: Intel IFC VF driver for VDPA
vdpasim: vDPA device simulator
vhost: introduce vDPA-based backend
virtio: introduce a vDPA based transport
vDPA: introduce vDPA bus
vringh: IOTLB support
vhost: factor out IOTLB
vhost: allow per device message handler
vhost: refine vhost and vringh kconfig
virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM
virtio-net: Introduce hash report feature
virtio-net: Introduce RSS receive steering feature
virtio-net: Introduce extended RSC feature
tools/virtio: option to build an out of tree module
- Add interrupt support on the rcar sensor (Niklas Söderlund)
- Add a new Spreadtrum thermal driver (Baolin Wang)
- Add thermal binding for the fsl scu board, a new API to retrieve the
sensor id bound to the thermal zone and i.MX system controller
sensor (Anson Huang))
- Remove warning log when a deferred probe is requested on Exynos
(Marek Szyprowski)
- Add the thermal monitoring unit support for imx8mm with its DT
bindings (Anson Huang)
- Rephrase the Kconfig text for clarity (Linus Walleij)
- Use the gpio descriptor for the ti-soc-thermal (Linus Walleij)
- Align msg structure to 4 bytes for i.MX SC, fix the Kconfig
dependency, add the __may_be unused annotation for PM functions and
the COMPILE_TEST option for imx8mm (Anson Huang)
- Fix a dependency on regmap in Kconfig for qoriq (Yuantian Tang)
- Add DT binding and support for the rcar gen3 r8a77961 and improve
the error path on the rcar init function (Niklas Söderlund)
- Cleanup and improvements for the tsens Qcom sensor (Amit Kucheria)
- Improve code by removing lock and caching values in the rcar thermal
sensor (Niklas Söderlund)
- Cleanup in the qoriq drivers and add a call to
imx_thermal_unregister_legacy_cooling in the removal function (Anson
Huang)
- Remove redundant 'maxItems' in tsens and sprd DT bindings (Rob Herring)
- Change the thermal DT bindings by making the cooling-maps optional
(Yuantian Tang)
- Add Tiger Lake support (Sumeet Pawnikar)
- Use scnprintf() for avoiding potential buffer overflow (Takashi Iwai)
- Make pkg_temp_lock a raw_spinlock_t(Clark Williams)
- Fix incorrect data types by changing them to signed on i.MX SC (Anson Huang)
- Replace zero-length array with flexible-array member (Gustavo A. R. Silva)
- Add support for i.MX8MP in the driver and in the DT bindings (Anson Huang)
- Fix return value of the cpufreq_set_cur_state() function (Willy Wolff)
- Remove abusing and scary WARN_ON in the cpufreq cooling device
(Daniel Lezcano)
- Fix build warning of incorrect argument type reported by sparse on
imx8mm (Anson Huang)
- Fix stub for the devfreq cooling device (Martin Blumenstingl)
- Fix cpu idle cooling documentation (Sergey Vidishev)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAl6MXkEACgkQqDIjiipP
6E+BIggAh52YBU8D8GthsvCPTgka95+wAIaZtx4Y7UnhvshHhM2w+m97TQOXK373
95mwO9mwQuAoksSmLo7pBQYJ7HItQ26Yoq9akpOL6EiT+BEWiqoHJgl+afVVtoKa
n67d3Pa6coup1+PQNIA8kpTIOmUQTP8THtwpZ3HlChWsg22NTd0QUGpGJ1TtBD/q
KqMdQjxahFJ4RTYsnECWBkw3EMkczMNMgdrXEvm4rMkcaJzv9g2ZPqerOShK/RzP
8sejWczt6jaRwu4hLpd/lLikTSHZoXMFJ8ylAiQXFELCPAQIrMS/ae+dTGJ4qP7x
hkjsewPbeA1Z+al/IBVHiCtOzKkICQ==
=XDYl
-----END PGP SIGNATURE-----
Merge tag 'thermal-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal updates from Daniel Lezcano:
- Convert tsens configuration DT binding to yaml (Rajeshwari)
- Add interrupt support on the rcar sensor (Niklas Söderlund)
- Add a new Spreadtrum thermal driver (Baolin Wang)
- Add thermal binding for the fsl scu board, a new API to retrieve the
sensor id bound to the thermal zone and i.MX system controller sensor
(Anson Huang))
- Remove warning log when a deferred probe is requested on Exynos
(Marek Szyprowski)
- Add the thermal monitoring unit support for imx8mm with its DT
bindings (Anson Huang)
- Rephrase the Kconfig text for clarity (Linus Walleij)
- Use the gpio descriptor for the ti-soc-thermal (Linus Walleij)
- Align msg structure to 4 bytes for i.MX SC, fix the Kconfig
dependency, add the __may_be unused annotation for PM functions and
the COMPILE_TEST option for imx8mm (Anson Huang)
- Fix a dependency on regmap in Kconfig for qoriq (Yuantian Tang)
- Add DT binding and support for the rcar gen3 r8a77961 and improve the
error path on the rcar init function (Niklas Söderlund)
- Cleanup and improvements for the tsens Qcom sensor (Amit Kucheria)
- Improve code by removing lock and caching values in the rcar thermal
sensor (Niklas Söderlund)
- Cleanup in the qoriq drivers and add a call to
imx_thermal_unregister_legacy_cooling in the removal function (Anson
Huang)
- Remove redundant 'maxItems' in tsens and sprd DT bindings (Rob
Herring)
- Change the thermal DT bindings by making the cooling-maps optional
(Yuantian Tang)
- Add Tiger Lake support (Sumeet Pawnikar)
- Use scnprintf() for avoiding potential buffer overflow (Takashi Iwai)
- Make pkg_temp_lock a raw_spinlock_t(Clark Williams)
- Fix incorrect data types by changing them to signed on i.MX SC (Anson
Huang)
- Replace zero-length array with flexible-array member (Gustavo A. R.
Silva)
- Add support for i.MX8MP in the driver and in the DT bindings (Anson
Huang)
- Fix return value of the cpufreq_set_cur_state() function (Willy
Wolff)
- Remove abusing and scary WARN_ON in the cpufreq cooling device
(Daniel Lezcano)
- Fix build warning of incorrect argument type reported by sparse on
imx8mm (Anson Huang)
- Fix stub for the devfreq cooling device (Martin Blumenstingl)
- Fix cpu idle cooling documentation (Sergey Vidishev)
* tag 'thermal-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (52 commits)
Documentation: cpu-idle-cooling: Fix diagram for 33% duty cycle
thermal: devfreq_cooling: inline all stubs for CONFIG_DEVFREQ_THERMAL=n
thermal: imx8mm: Fix build warning of incorrect argument type
thermal/drivers/cpufreq_cooling: Remove abusing WARN_ON
thermal/drivers/cpufreq_cooling: Fix return of cpufreq_set_cur_state
thermal: imx8mm: Add i.MX8MP support
dt-bindings: thermal: imx8mm-thermal: Add support for i.MX8MP
thermal: qcom: tsens.h: Replace zero-length array with flexible-array member
thermal: imx_sc_thermal: Fix incorrect data type
thermal: int340x_thermal: Use scnprintf() for avoiding potential buffer overflow
thermal: int340x: processor_thermal: Add Tiger Lake support
thermal/x86_pkg_temp: Make pkg_temp_lock a raw_spinlock_t
dt-bindings: thermal: make cooling-maps property optional
dt-bindings: thermal: qcom-tsens: Remove redundant 'maxItems'
dt-bindings: thermal: sprd: Remove redundant 'maxItems'
thermal: imx: Calling imx_thermal_unregister_legacy_cooling() in .remove
thermal: qoriq: Sort includes alphabetically
thermal: qoriq: Use devm_add_action_or_reset() to handle all cleanups
thermal: rcar_thermal: Remove lock in rcar_thermal_get_current_temp()
thermal: rcar_thermal: Do not store ctemp in rcar_thermal_priv
...
In set_operation_mode() function remove duplicated check for args.list
parameter, which is already done one line before.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add xdp_info selftest that makes sure that bpf_get_link_xdp_id returns
valid prog_id for different input modes:
* w/ and w/o flags when no program is attached;
* w/ and w/o flags when one program is attached.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/2a9a6d1ce33b91ccc1aa3de6dba2d309f2062811.1586236080.git.rdna@fb.com
Currently if one of XDP_FLAGS_{DRV,HW,SKB}_MODE flags is passed to
bpf_get_link_xdp_id() and there is a single XDP program attached to
ifindex, that program's id will be returned by bpf_get_link_xdp_id() in
prog_id argument no matter what mode the program is attached in, i.e.
flags argument is not taken into account.
For example, if there is a single program attached with
XDP_FLAGS_SKB_MODE but user calls bpf_get_link_xdp_id() with flags =
XDP_FLAGS_DRV_MODE, that skb program will be returned.
Fix it by returning info->prog_id only if user didn't specify flags. If
flags is specified then return corresponding mode-specific-field from
struct xdp_link_info.
The initial error was introduced in commit 50db9f0731 ("libbpf: Add a
support for getting xdp prog id on ifindex") and then refactored in
473f4e133a so 473f4e133a is used in the Fixes tag.
Fixes: 473f4e133a ("libbpf: Add bpf_get_link_xdp_info() function to get more XDP information")
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/0e9e30490b44b447bb2bebc69c7135e7fe7e4e40.1586236080.git.rdna@fb.com
This testcase repeats epollbug.c from the bug:
https://bugzilla.kernel.org/show_bug.cgi?id=205933
What it tests? It tests the race between epoll_ctl() and epoll_wait().
New event mask passed to epoll_ctl() triggers wake up, which can be missed
because of the bug described in the link. Reproduction is 100%, so easy
to fix. Kudos, Max, for wonderful test case.
Signed-off-by: Roman Penyaev <rpenyaev@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Max Neunhoeffer <max@arangodb.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Christopher Kohlhoff <chris.kohlhoff@clearpool.io>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Jes Sorensen <jes.sorensen@gmail.com>
Link: http://lkml.kernel.org/r/20200214170211.561524-2-rpenyaev@suse.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Leave blank space between the right-hand and left-hand side of the
assignment to meet the kernel coding style better.
Signed-off-by: chenqiwu <chenqiwu@xiaomi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Michel Lespinasse <walken@google.com>
Link: http://lkml.kernel.org/r/1582621140-25850-1-git-send-email-qiwuchen55@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add uffd tests for write protection.
Instead of introducing new tests for it, let's simply squashing uffd-wp
tests into existing uffd-missing test cases. Changes are:
(1) Bouncing tests
We do the write-protection in two ways during the bouncing test:
- By using UFFDIO_COPY_MODE_WP when resolving MISSING pages: then
we'll make sure for each bounce process every single page will be
at least fault twice: once for MISSING, once for WP.
- By direct call UFFDIO_WRITEPROTECT on existing faulted memories:
To further torture the explicit page protection procedures of
uffd-wp, we split each bounce procedure into two halves (in the
background thread): the first half will be MISSING+WP for each
page as explained above. After the first half, we write protect
the faulted region in the background thread to make sure at least
half of the pages will be write protected again which is the first
half to test the new UFFDIO_WRITEPROTECT call. Then we continue
with the 2nd half, which will contain both MISSING and WP faulting
tests for the 2nd half and WP-only faults from the 1st half.
(2) Event/Signal test
Mostly previous tests but will do MISSING+WP for each page. For
sigbus-mode test we'll need to provide standalone path to handle the
write protection faults.
For all tests, do statistics as well for uffd-wp pages.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Martin Cracauer <cracauer@cons.org>
Cc: Marty McFadden <mcfadden8@llnl.gov>
Cc: Maya Gokhale <gokhale2@llnl.gov>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Link: http://lkml.kernel.org/r/20200220163112.11409-20-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Introduce uffd_stats structure for statistics of the self test, at the
same time refactor the code to always pass in the uffd_stats for either
read() or poll() typed fault handling threads instead of using two
different ways to return the statistic results. No functional change.
With the new structure, it's very easy to introduce new statistics.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bobby Powers <bobbypowers@gmail.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Denis Plotnikov <dplotnikov@virtuozzo.com>
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Martin Cracauer <cracauer@cons.org>
Cc: Marty McFadden <mcfadden8@llnl.gov>
Cc: Maya Gokhale <gokhale2@llnl.gov>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Link: http://lkml.kernel.org/r/20200220163112.11409-19-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Builds of Fedora's kernel-tools package started to fail with "may be
used uninitialized" warnings for nl_pid in bpf_set_link_xdp_fd() and
bpf_get_link_xdp_info() on the s390 architecture.
Although libbpf_netlink_open() always returns a negative number when it
does not set *nl_pid, the compiler does not determine this and thus
believes the variable might be used uninitialized. Assuage gcc's fears
by explicitly initializing nl_pid.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1807781
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200404051430.698058-1-jcline@redhat.com
core:
- Support for cgroup tracking in samples to allow cgroup based
analysis
tools:
- Support for cgroup analysis
- Commandline option and hotkey for perf top to change the sort order
- A set of fixes all over the place
- Various build system related improvements
- Updates of the X86 pmu event JSON data
- Documentation updates
-----BEGIN PGP SIGNATURE-----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=2UUD
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2020-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more perf updates from Thomas Gleixner:
"Perf updates all over the place:
core:
- Support for cgroup tracking in samples to allow cgroup based
analysis
tools:
- Support for cgroup analysis
- Commandline option and hotkey for perf top to change the sort order
- A set of fixes all over the place
- Various build system related improvements
- Updates of the X86 pmu event JSON data
- Documentation updates"
* tag 'perf-urgent-2020-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits)
perf python: Fix clang detection to strip out options passed in $CC
perf tools: Support Python 3.8+ in Makefile
perf script: Fix invalid read of directory entry after closedir()
perf script report: Fix SEGFAULT when using DWARF mode
perf script: add -S/--symbols documentation
perf pmu-events x86: Use CPU_CLK_UNHALTED.THREAD in Kernel_Utilization metric
perf events parser: Add missing Intel CPU events to parser
perf script: Allow --symbol to accept hexadecimal addresses
perf report/top TUI: Fix title line formatting
perf top: Support hotkey to change sort order
perf top: Support --group-sort-idx to change the sort order
perf symbols: Fix arm64 gap between kernel start and module end
perf build-test: Honour JOBS to override detection of number of cores
perf script: Add --show-cgroup-events option
perf top: Add --all-cgroups option
perf record: Add --all-cgroups option
perf record: Support synthesizing cgroup events
perf report: Add 'cgroup' sort key
perf cgroup: Maintain cgroup hierarchy
perf tools: Basic support for CGROUP event
...
- A large series from Nick for 64-bit to further rework our exception vectors,
and rewrite portions of the syscall entry/exit and interrupt return in C. The
result is much easier to follow code that is also faster in general.
- Cleanup of our ptrace code to split various parts out that had become badly
intertwined with #ifdefs over the years.
- Changes to our NUMA setup under the PowerVM hypervisor which should
hopefully avoid non-sensical topologies which can lead to warnings from the
workqueue code and other problems.
- MAINTAINERS updates to remove some of our old orphan entries and update the
status of others.
- Quite a few other small changes and fixes all over the map.
Thanks to:
Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew Donnellan, Aneesh
Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen Zhou, Christophe JAILLET,
Christophe Leroy, Christoph Hellwig, Clement Courbet, Daniel Axtens, David
Gibson, Douglas Miller, Fabiano Rosas, Fangrui Song, Ganesh Goudar, Gautham R.
Shenoy, Greg Kroah-Hartman, Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie
Halip, Jan Kara, Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger,
Laurentiu Tudor, Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh
Salgaonkar, Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira,
Michael Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan
Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers,
Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat, Rasmus Villemoes, Ravi
Bangoria, Roman Bolshakov, Sam Bobroff, Sandipan Das, Santosh S, Sedat Dilek,
Segher Boessenkool, Shilpasri G Bhat, Sourabh Jain, Srikar Dronamraju, Stephen
Rothwell, Tyrel Datwyler, Vaibhav Jain, YueHaibing.
-----BEGIN PGP SIGNATURE-----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=ARdm
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Slightly late as I had to rebase mid-week to insert a bug fix:
- A large series from Nick for 64-bit to further rework our exception
vectors, and rewrite portions of the syscall entry/exit and
interrupt return in C. The result is much easier to follow code
that is also faster in general.
- Cleanup of our ptrace code to split various parts out that had
become badly intertwined with #ifdefs over the years.
- Changes to our NUMA setup under the PowerVM hypervisor which should
hopefully avoid non-sensical topologies which can lead to warnings
from the workqueue code and other problems.
- MAINTAINERS updates to remove some of our old orphan entries and
update the status of others.
- Quite a few other small changes and fixes all over the map.
Thanks to: Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew
Donnellan, Aneesh Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen
Zhou, Christophe JAILLET, Christophe Leroy, Christoph Hellwig, Clement
Courbet, Daniel Axtens, David Gibson, Douglas Miller, Fabiano Rosas,
Fangrui Song, Ganesh Goudar, Gautham R. Shenoy, Greg Kroah-Hartman,
Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie Halip, Jan Kara,
Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger, Laurentiu Tudor,
Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh Salgaonkar,
Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira, Michael
Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan
Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick
Desaulniers, Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat,
Rasmus Villemoes, Ravi Bangoria, Roman Bolshakov, Sam Bobroff,
Sandipan Das, Santosh S, Sedat Dilek, Segher Boessenkool, Shilpasri G
Bhat, Sourabh Jain, Srikar Dronamraju, Stephen Rothwell, Tyrel
Datwyler, Vaibhav Jain, YueHaibing"
* tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (158 commits)
powerpc: Make setjmp/longjmp signature standard
powerpc/cputable: Remove unnecessary copy of cpu_spec->oprofile_type
powerpc: Suppress .eh_frame generation
powerpc: Drop -fno-dwarf2-cfi-asm
powerpc/32: drop unused ISA_DMA_THRESHOLD
powerpc/powernv: Add documentation for the opal sensor_groups sysfs interfaces
selftests/powerpc: Fix try-run when source tree is not writable
powerpc/vmlinux.lds: Explicitly retain .gnu.hash
powerpc/ptrace: move ptrace_triggered() into hw_breakpoint.c
powerpc/ptrace: create ppc_gethwdinfo()
powerpc/ptrace: create ptrace_get_debugreg()
powerpc/ptrace: split out ADV_DEBUG_REGS related functions.
powerpc/ptrace: move register viewing functions out of ptrace.c
powerpc/ptrace: split out TRANSACTIONAL_MEM related functions.
powerpc/ptrace: split out SPE related functions.
powerpc/ptrace: split out ALTIVEC related functions.
powerpc/ptrace: split out VSX related functions.
powerpc/ptrace: drop PARAMETER_SAVE_AREA_OFFSET
powerpc/ptrace: drop unnecessary #ifdefs CONFIG_PPC64
powerpc/ptrace: remove unused header includes
...
- The ring buffer is no longer disabled when reading the trace file.
The trace_pipe file was made to be used for live tracing and reading
as it acted like the normal producer/consumer. As the trace file
would not consume the data, the easy way of handling it was to just
disable writes to the ring buffer. This came to a surprise to the
BPF folks who complained about lost events due to reading.
This is no longer an issue. If someone wants to keep the old disabling
there's a new option "pause-on-trace" that can be set.
- New set_ftrace_notrace_pid file. PIDs in this file will not be traced
by the function tracer. Similar to set_ftrace_pid, which makes the
function tracer only trace those tasks with PIDs in the file, the
set_ftrace_notrace_pid does the reverse.
- New set_event_notrace_pid file. PIDs in this file will cause events
not to be traced if triggered by a task with a matching PID.
Similar to the set_event_pid file but will not be traced.
Note, sched_waking and sched_switch events may still be trace if
one of the tasks referenced by those events contains a PID that
is allowed to be traced.
Tracing related features:
- New bootconfig option, that is attached to the initrd file.
If bootconfig is on the command line, then the initrd file
is searched looking for a bootconfig appended at the end.
- New GPU tracepoint infrastructure to help the gfx drivers to get
off debugfs (acked by Greg Kroah-Hartman)
Other minor updates and fixes.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXokgWRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qgrHAP0UkKs/52JY4oWa3OIh/OqK+vnCrIwz
zGvDFOYM0fKbwgD9FZWgzlcaYK5m2Cxlhp4VoraZveHMLJUhnEHtdX6X0wk=
=Rebj
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"New tracing features:
- The ring buffer is no longer disabled when reading the trace file.
The trace_pipe file was made to be used for live tracing and
reading as it acted like the normal producer/consumer. As the trace
file would not consume the data, the easy way of handling it was to
just disable writes to the ring buffer.
This came to a surprise to the BPF folks who complained about lost
events due to reading. This is no longer an issue. If someone wants
to keep the old disabling there's a new option "pause-on-trace"
that can be set.
- New set_ftrace_notrace_pid file. PIDs in this file will not be
traced by the function tracer.
Similar to set_ftrace_pid, which makes the function tracer only
trace those tasks with PIDs in the file, the set_ftrace_notrace_pid
does the reverse.
- New set_event_notrace_pid file. PIDs in this file will cause events
not to be traced if triggered by a task with a matching PID.
Similar to the set_event_pid file but will not be traced. Note,
sched_waking and sched_switch events may still be traced if one of
the tasks referenced by those events contains a PID that is allowed
to be traced.
Tracing related features:
- New bootconfig option, that is attached to the initrd file.
If bootconfig is on the command line, then the initrd file is
searched looking for a bootconfig appended at the end.
- New GPU tracepoint infrastructure to help the gfx drivers to get
off debugfs (acked by Greg Kroah-Hartman)
And other minor updates and fixes"
* tag 'trace-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (27 commits)
tracing: Do not allocate buffer in trace_find_next_entry() in atomic
tracing: Add documentation on set_ftrace_notrace_pid and set_event_notrace_pid
selftests/ftrace: Add test to test new set_event_notrace_pid file
selftests/ftrace: Add test to test new set_ftrace_notrace_pid file
tracing: Create set_event_notrace_pid to not trace tasks
ftrace: Create set_ftrace_notrace_pid to not trace tasks
ftrace: Make function trace pid filtering a bit more exact
ftrace/kprobe: Show the maxactive number on kprobe_events
tracing: Have the document reflect that the trace file keeps tracing enabled
ring-buffer/tracing: Have iterator acknowledge dropped events
tracing: Do not disable tracing when reading the trace file
ring-buffer: Do not disable recording when there is an iterator
ring-buffer: Make resize disable per cpu buffer instead of total buffer
ring-buffer: Optimize rb_iter_head_event()
ring-buffer: Do not die if rb_iter_peek() fails more than thrice
ring-buffer: Have rb_iter_head_event() handle concurrent writer
ring-buffer: Add page_stamp to iterator for synchronization
ring-buffer: Rename ring_buffer_read() to read_buffer_iter_advance()
ring-buffer: Have ring_buffer_empty() not depend on tracing stopped
tracing: Save off entry when peeking at next entry
...
Core and userspace API:
- The userspace API KFIFOs have been imoproved with locks that
do not block interrupts. This makes us better at getting
events to userspace without blocking or disturbing new events
arriving in the same time. This was reviewed by the KFIFO
maintainer Stefani. This is a generic improvement which
paves the road for similar improvements in other subsystems.
- We provide a new ioctl() for monitoring changes in the line
information, such as when multiple clients are taking lines
and giving them back, possibly reconfiguring them in the
process: we can now monitor that and not get stuck with stale
static information.
- An example tool 'gpio-watch' is provided to showcase this
functionality.
- Timestamps for events are switched to ktime_get_ns() which is
monotonic. We previously had a 'realtime' stamp which could
move forward and *backward* in time, which probably would just
cause silent bugs and weird behaviour. In the long run we
see two relevant timestamps: ktime_get_ns() or the timestamp
sometimes provided by the GPIO hardware itself, if that
exists.
- Device Tree overlay support for GPIO hogs. On systems that
load overlays, these overlays can now contain hogs, and will
then be respected.
- Handle pin control interaction with nonexisting pin ranges
in the GPIO library core instead of in the individual
drivers.
New drivers:
- New driver for the Mellanox BlueField 2 GPIO controller.
Driver improvements:
- Introduce the BGPIOF_NO_SET_ON_INPUT flag to the generic
MMIO GPIO library and use this flag in the MT7621 driver.
- Texas Instruments OMAP CPU power management improvements,
such as blocking of idle on pending GPIO interrupts.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl6IWUAACgkQQRCzN7AZ
XXPReQ//WUHALqbLOL/DZR8kVyygVZXV8JC4jcuMQgX+Mvm1DQuGp1T8VPlG1wC7
vy5eTz3oPc+jAaHGQgGiSGdPRQtDkAW5+Wo4hzcHJ5ATlzT7cgNywK3Jk6+YlPlF
CuhHB6aPEymQ45/GseUwEb5AuWWKS03P3XdOBj2IdDhuRHRfyjHi+31s0lh6bfNs
kC2eP+VtddVqLbOdPE1GKjZi+Iq9ffFRmiNTduHbl3o6ZoE6WnMvn2wsC6zPpJr4
AM8zpj9JFUq1DYaQf8bJJLTm8lItcyyUUhq8oKUxBpecjWfhUYwEYHGxqWIk9fbM
oyJ3zBlU0G7bc4gu1VG3cTacUf//BTmQG3iZNSSw9w17I1hOMX9wNJan22VkEbJD
8X+6AcgkldNwnAVWcVgg1lkfgdxlWURMYXl1uQPQZSj2SQL6gFcdkAhKwlgl8jOi
RctUfZ69tD+4ul2b+MhL6BtIk16o2RIBJF53ESxrR4qftRZ3ywW4JQ/AwNoQalxM
Xg8U3axFm8kitOzemVoXGr/AIee9KpcA4NK8yQLEPmSFgBaVzaVlP9Q7Klr7QGXg
RvK45uRULrWnvSyoVY7Ox+ie1NiG8JAbaxKBxkV8n+z+gVMh82xcyQX+5SgWxwW0
dzeEx1B0mCW4WDAK29CcdQVE6m4K2u/fabhZq5IhgS1mQoTC894=
=EFm/
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO development for the v5.7 kernel cycle.
Core and userspace API:
- The userspace API KFIFOs have been imoproved with locks that do not
block interrupts. This makes us better at getting events to
userspace without blocking or disturbing new events arriving in the
same time. This was reviewed by the KFIFO maintainer Stefani. This
is a generic improvement which paves the road for similar
improvements in other subsystems.
- We provide a new ioctl() for monitoring changes in the line
information, such as when multiple clients are taking lines and
giving them back, possibly reconfiguring them in the process: we
can now monitor that and not get stuck with stale static
information.
- An example tool 'gpio-watch' is provided to showcase this
functionality.
- Timestamps for events are switched to ktime_get_ns() which is
monotonic. We previously had a 'realtime' stamp which could move
forward and *backward* in time, which probably would just cause
silent bugs and weird behaviour. In the long run we see two
relevant timestamps: ktime_get_ns() or the timestamp sometimes
provided by the GPIO hardware itself, if that exists.
- Device Tree overlay support for GPIO hogs. On systems that load
overlays, these overlays can now contain hogs, and will then be
respected.
- Handle pin control interaction with nonexisting pin ranges in the
GPIO library core instead of in the individual drivers.
New drivers:
- New driver for the Mellanox BlueField 2 GPIO controller.
Driver improvements:
- Introduce the BGPIOF_NO_SET_ON_INPUT flag to the generic MMIO GPIO
library and use this flag in the MT7621 driver.
- Texas Instruments OMAP CPU power management improvements, such as
blocking of idle on pending GPIO interrupts"
* tag 'gpio-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (59 commits)
Revert "gpio: eic-sprd: Use devm_platform_ioremap_resource()"
pinctrl: Unconditionally assign .request()/.free()
gpio: Unconditionally assign .request()/.free()
gpio: export of_pinctrl_get to modules
pinctrl: Define of_pinctrl_get() dummy for !PINCTRL
gpio: Rename variable in core APIs
gpio: Avoid using pin ranges with !PINCTRL
gpiolib: Remove unused gpio_chip parameter from gpio_set_bias()
gpiolib: Pass gpio_desc to gpio_set_config()
gpiolib: Introduce gpiod_set_config()
tools: gpio: Fix out-of-tree build regression
gpio: gpiolib: fix a doc warning
gpio: tegra186: Add Tegra194 pin ranges for GG.0 and GG.1
gpio: tegra186: Add support for pin ranges
gpio: Support GPIO controllers without pin-ranges
ARM: integrator: impd1: Use GPIO_LOOKUP() helper macro
gpio: brcmstb: support gpio-line-names property
tools: gpio: Fix typo in gpio-utils
tools: gpio-hammer: Apply scripts/Lindent and retain good changes
gpiolib: gpio_name_to_desc: factor out !name check
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXoSOqgAKCRCRxhvAZXjc
omfTAQDlbSZkzNfEWcxi+WE9tg+Y5tHR7hjdsK99Mb3vhAh5GwD+LT0EOI3WKoNY
MQUp2RaR7YwWL/pktd9N1EX8qa5IPg4=
=zvBX
-----END PGP SIGNATURE-----
Merge tag 'threads-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull thread updates from Christian Brauner:
"The main change for this cycle was the extension for clone3() to
support spawning processes directly into cgroups via CLONE_INTO_CGROUP
(commit ef2c41cf38a7: "clone3: allow spawning processes
into cgroups").
But since I had to touch kernel/cgroup/ quite a bit I had Tejun route
that through his tree this time around to make it easier for him to
handle other changes.
So here is just the unexciting leftovers: a regression test for the
ENOMEM regression we fixed in commit b26ebfe12f ("pid: Fix error
return value in some cases") verifying that we report ENOMEM when
trying to create a new process in a pid namespace whose init
process/subreaper has already exited"
* tag 'threads-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
selftests: add pid namespace ENOMEM regression test
The tm-poison test includes inline asm which is 64-bit only, so the
test must be built 64-bit in order to work.
Otherwise it fails, eg:
# file tm-poison
tm-poison: ELF 32-bit MSB executable, PowerPC or cisco 4500, version 1 (SYSV) ...
# ./tm-poison
test: tm_poison_test
Unknown value 0x1fff71150 leaked into f31!
Unknown value 0x1fff710c0 leaked into vr31!
failure: tm_poison_test
Fixes: a003365cab ("powerpc/tm: Add tm-poison test")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200403095656.3772005-1-mpe@ellerman.id.au
perf python:
Arnaldo Carvalho de Melo:
- Fix clang detection to strip out options passed in $CC.
build:
He Zhe:
- Normalize gcc parameter when generating arch errno table, fixing
the build by removing options from $(CC).
Sam Lunt:
- Support Python 3.8+ in Makefile.
perf report/top:
Arnaldo Carvalho de Melo:
- Fix title line formatting.
perf script:
Andreas Gerstmayr:
- Fix SEGFAULT when using DWARF mode.
- Fix invalid read of directory entry after closedir(), found with valgrind.
Hagen Paul Pfeifer:
- Introduce --deltatime option.
Stephane Eranian:
- Allow --symbol to accept hexadecimal addresses.
Ian Rogers:
- Add -S/--symbols documentation
Namhyung Kim:
- Add --show-cgroup-events option.
perf python:
Arnaldo Carvalho de Melo:
- Include rwsem.c in the python binding, needed by the cgroups improvements.
build-test:
Arnaldo Carvalho de Melo:
- Honour JOBS to override detection of number of cores
perf top:
Jin Yao:
- Support --group-sort-idx to change the sort order
- perf top: Support hotkey to change sort order
perf pmu-events x86:
Jin Yao:
- Use CPU_CLK_UNHALTED.THREAD in Kernel_Utilization metric
perf symbols arm64:
Kemeng Shi:
- Fix arm64 gap between kernel start and module end
kernel perf subsystem:
Namhyung Kim:
- Add PERF_RECORD_CGROUP event and Add PERF_SAMPLE_CGROUP feature,
to allow cgroup tracking, saving a link between cgroup path and
its id number.
perf cgroup:
Namhyung Kim:
- Maintain cgroup hierarchy.
perf report:
Namhyung Kim:
- Add 'cgroup' sort key.
perf record:
Namhyung Kim:
- Support synthesizing cgroup events for pre-existing cgroups.
- Add --all-cgroups option
Documentation:
Tony Jones:
- Update docs regarding kernel/user space unwinding.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXodMtwAKCRCyPKLppCJ+
J+leAP0Ws0dGzMSIwcMVc7zvK1IsYOTlZ8lYXJePxD+Po/YPdAEA6Squf4gwZ2wm
b9R7w50dlCkMJ9LaueCeZZjh/4asFwQ=
=auOb
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-5.7-20200403' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes and improvements from Arnaldo Carvalho de Melo:
perf python:
Arnaldo Carvalho de Melo:
- Fix clang detection to strip out options passed in $CC.
build:
He Zhe:
- Normalize gcc parameter when generating arch errno table, fixing
the build by removing options from $(CC).
Sam Lunt:
- Support Python 3.8+ in Makefile.
perf report/top:
Arnaldo Carvalho de Melo:
- Fix title line formatting.
perf script:
Andreas Gerstmayr:
- Fix SEGFAULT when using DWARF mode.
- Fix invalid read of directory entry after closedir(), found with valgrind.
Hagen Paul Pfeifer:
- Introduce --deltatime option.
Stephane Eranian:
- Allow --symbol to accept hexadecimal addresses.
Ian Rogers:
- Add -S/--symbols documentation
Namhyung Kim:
- Add --show-cgroup-events option.
perf python:
Arnaldo Carvalho de Melo:
- Include rwsem.c in the python binding, needed by the cgroups improvements.
build-test:
Arnaldo Carvalho de Melo:
- Honour JOBS to override detection of number of cores
perf top:
Jin Yao:
- Support --group-sort-idx to change the sort order
- perf top: Support hotkey to change sort order
perf pmu-events x86:
Jin Yao:
- Use CPU_CLK_UNHALTED.THREAD in Kernel_Utilization metric
perf symbols arm64:
Kemeng Shi:
- Fix arm64 gap between kernel start and module end
kernel perf subsystem:
Namhyung Kim:
- Add PERF_RECORD_CGROUP event and Add PERF_SAMPLE_CGROUP feature,
to allow cgroup tracking, saving a link between cgroup path and
its id number.
perf cgroup:
Namhyung Kim:
- Maintain cgroup hierarchy.
perf report:
Namhyung Kim:
- Add 'cgroup' sort key.
perf record:
Namhyung Kim:
- Support synthesizing cgroup events for pre-existing cgroups.
- Add --all-cgroups option
Documentation:
Tony Jones:
- Update docs regarding kernel/user space unwinding.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=deWu
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Revert sysfs "rescan" renames that broke apps (Kelsey Skunberg)
- Add more 32 GT/s link speed decoding and improve the implementation
(Yicong Yang)
Resource management:
- Add support for sizing programmable host bridge apertures and fix a
related alpha Nautilus regression (Ivan Kokshaysky)
Interrupts:
- Add boot interrupt quirk mechanism for Xeon chipsets and document
boot interrupts (Sean V Kelley)
PCIe native device hotplug:
- When possible, disable in-band presence detect and use PDS
(Alexandru Gagniuc)
- Add DMI table for devices that don't use in-band presence detection
but don't advertise that correctly (Stuart Hayes)
- Fix hang when powering slots up/down via sysfs (Lukas Wunner)
- Fix an MSI interrupt race (Stuart Hayes)
Virtualization:
- Add ACS quirks for Zhaoxin devices (Raymond Pang)
Error handling:
- Add Error Disconnect Recover (EDR) support so firmware can report
devices disconnected via DPC and we can try to recover (Kuppuswamy
Sathyanarayanan)
Peer-to-peer DMA:
- Add Intel Sky Lake-E Root Ports B, C, D to the whitelist (Andrew
Maier)
ASPM:
- Reduce severity of common clock config message (Chris Packham)
- Clear the correct bits when enabling L1 substates, so we don't go
to the wrong state (Yicong Yang)
Endpoint framework:
- Replace EPF linkup ops with notifier call chain and improve locking
(Kishon Vijay Abraham I)
- Fix concurrent memory allocation in OB address region (Kishon Vijay
Abraham I)
- Move PF function number assignment to EPC core to support multiple
function creation methods (Kishon Vijay Abraham I)
- Fix issue with clearing configfs "start" entry (Kunihiko Hayashi)
- Fix issue with endpoint MSI-X ignoring BAR Indicator and Table
Offset (Kishon Vijay Abraham I)
- Add support for testing DMA transfers (Kishon Vijay Abraham I)
- Add support for testing > 10 endpoint devices (Kishon Vijay Abraham I)
- Add support for tests to clear IRQ (Kishon Vijay Abraham I)
- Add common DT schema for endpoint controllers (Kishon Vijay Abraham I)
Amlogic Meson PCIe controller driver:
- Add DT bindings for AXG PCIe PHY, shared MIPI/PCIe analog PHY (Remi
Pommarel)
- Add Amlogic AXG PCIe PHY, AXG MIPI/PCIe analog PHY drivers (Remi
Pommarel)
Cadence PCIe controller driver:
- Add Root Complex/Endpoint DT schema for Cadence PCIe (Kishon Vijay
Abraham I)
Intel VMD host bridge driver:
- Add two VMD Device IDs that require bus restriction mode (Sushma
Kalakota)
Mobiveil PCIe controller driver:
- Refactor and modularize mobiveil driver (Hou Zhiqiang)
- Add support for Mobiveil GPEX Gen4 host (Hou Zhiqiang)
Microsoft Hyper-V host bridge driver:
- Add support for Hyper-V PCI protocol version 1.3 and
PCI_BUS_RELATIONS2 (Long Li)
- Refactor to prepare for virtual PCI on non-x86 architectures (Boqun
Feng)
- Fix memory leak in hv_pci_probe()'s error path (Dexuan Cui)
NVIDIA Tegra PCIe controller driver:
- Use pci_parse_request_of_pci_ranges() (Rob Herring)
- Add support for endpoint mode and related DT updates (Vidya Sagar)
- Reduce -EPROBE_DEFER error message log level (Thierry Reding)
Qualcomm PCIe controller driver:
- Restrict class fixup to specific Qualcomm devices (Bjorn Andersson)
Synopsys DesignWare PCIe controller driver:
- Refactor core initialization code for endpoint mode (Vidya Sagar)
- Fix endpoint MSI-X to use correct table address (Kishon Vijay
Abraham I)
TI DRA7xx PCIe controller driver:
- Fix MSI IRQ handling (Vignesh Raghavendra)
TI Keystone PCIe controller driver:
- Allow AM654 endpoint to raise MSI-X interrupt (Kishon Vijay Abraham I)
Miscellaneous:
- Quirk ASMedia XHCI USB to avoid "PME# from D0" defect (Kai-Heng
Feng)
- Use ioremap(), not phys_to_virt(), for platform ROM to fix video
ROM mapping with CONFIG_HIGHMEM (Mikel Rychliski)"
* tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (96 commits)
misc: pci_endpoint_test: remove duplicate macro PCI_ENDPOINT_TEST_STATUS
PCI: tegra: Print -EPROBE_DEFER error message at debug level
misc: pci_endpoint_test: Use full pci-endpoint-test name in request_irq()
misc: pci_endpoint_test: Fix to support > 10 pci-endpoint-test devices
tools: PCI: Add 'e' to clear IRQ
misc: pci_endpoint_test: Add ioctl to clear IRQ
misc: pci_endpoint_test: Avoid using module parameter to determine irqtype
PCI: keystone: Allow AM654 PCIe Endpoint to raise MSI-X interrupt
PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address
PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments
misc: pci_endpoint_test: Add support to get DMA option from userspace
tools: PCI: Add 'd' command line option to support DMA
misc: pci_endpoint_test: Use streaming DMA APIs for buffer allocation
PCI: endpoint: functions/pci-epf-test: Print throughput information
PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data
PCI: pciehp: Fix MSI interrupt race
PCI: pciehp: Fix indefinite wait on sysfs requests
PCI: endpoint: Fix clearing start entry in configfs
PCI: tegra: Add support for PCIe endpoint mode in Tegra194
PCI: sysfs: Revert "rescan" file renames
...
Here is the big set of char/misc/other driver patches for 5.7-rc1.
Lots of things in here, and it's later than expected due to some reverts
to resolve some reported issues. All is now clean with no reported
problems in linux-next.
Included in here is:
- interconnect updates
- mei driver updates
- uio updates
- nvmem driver updates
- soundwire updates
- binderfs updates
- coresight updates
- habanalabs updates
- mhi new bus type and core
- extcon driver updates
- some Kconfig cleanups
- other small misc driver cleanups and updates
As mentioned, all have been in linux-next for a while, and with the last
two reverts, all is calm and good.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodfvA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynzCQCfROhar3E8EhYEqSOP6xq6uhX9uegAnRgGY2rs
rN4JJpOcTddvZcVlD+vo
=ocWk
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char/misc/other driver patches for 5.7-rc1.
Lots of things in here, and it's later than expected due to some
reverts to resolve some reported issues. All is now clean with no
reported problems in linux-next.
Included in here is:
- interconnect updates
- mei driver updates
- uio updates
- nvmem driver updates
- soundwire updates
- binderfs updates
- coresight updates
- habanalabs updates
- mhi new bus type and core
- extcon driver updates
- some Kconfig cleanups
- other small misc driver cleanups and updates
As mentioned, all have been in linux-next for a while, and with the
last two reverts, all is calm and good"
* tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits)
Revert "driver core: platform: Initialize dma_parms for platform devices"
Revert "amba: Initialize dma_parms for amba devices"
amba: Initialize dma_parms for amba devices
driver core: platform: Initialize dma_parms for platform devices
bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device()
bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture
bus: mhi: core: Add support for reading MHI info from device
misc: rtsx: set correct pcr_ops for rts522A
speakup: misc: Use dynamic minor numbers for speakup devices
mei: me: add cedar fork device ids
coresight: do not use the BIT() macro in the UAPI header
Documentation: provide IBM contacts for embargoed hardware
nvmem: core: remove nvmem_sysfs_get_groups()
nvmem: core: use is_bin_visible for permissions
nvmem: core: use device_register and device_unregister
nvmem: core: add root_only member to nvmem device struct
extcon: axp288: Add wakeup support
extcon: Mark extcon_get_edev_name() function as exported symbol
extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER
dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format
...
Here are 3 SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your current
tree, that should be trivial to handle (one file modified by two things,
one file deleted.)
All 3 of these have been in linux-next for a while, with no reported
issues other than the merge conflict.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodg5A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykySQCgy9YDrkz7nWq6v3Gohl6+lW/L+rMAnRM4uTZm
m5AuCzO3Azt9KBi7NL+L
=2Lm5
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here are three SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your
current tree, that should be trivial to handle (one file modified by
two things, one file deleted.)
All three of these have been in linux-next for a while, with no
reported issues other than the merge conflict"
* tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
ASoC: MT6660: make spdxcheck.py happy
.gitignore: add SPDX License Identifier
.gitignore: remove too obvious comments
Pull cgroup updates from Tejun Heo:
- Christian extended clone3 so that processes can be spawned into
cgroups directly.
This is not only neat in terms of semantics but also avoids grabbing
the global cgroup_threadgroup_rwsem for migration.
- Daniel added !root xattr support to cgroupfs.
Userland already uses xattrs on cgroupfs for bookkeeping. This will
allow delegated cgroups to support such usages.
- Prateek tried to make cpuset hotplug handling synchronous but that
led to possible deadlock scenarios. Reverted.
- Other minor changes including release_agent_path handling cleanup.
* 'for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
docs: cgroup-v1: Document the cpuset_v2_mode mount option
Revert "cpuset: Make cpuset hotplug synchronous"
cgroupfs: Support user xattrs
kernfs: Add option to enable user xattrs
kernfs: Add removed_size out param for simple_xattr_set
kernfs: kvmalloc xattr value instead of kmalloc
cgroup: Restructure release_agent_path handling
selftests/cgroup: add tests for cloning into cgroups
clone3: allow spawning processes into cgroups
cgroup: add cgroup_may_write() helper
cgroup: refactor fork helpers
cgroup: add cgroup_get_from_file() helper
cgroup: unify attach permission checking
cpuset: Make cpuset hotplug synchronous
cgroup.c: Use built-in RCU list checking
kselftest/cgroup: add cgroup destruction test
cgroup: Clean up css_set task traversal
The clang check in the python setup.py file expected $CC to be just the
name of the compiler, not the compiler + options, i.e. all options were
expected to be passed in $CFLAGS, this ends up making it fail in systems
where CC is set to, e.g.:
"aarch64-linaro-linux-gcc --sysroot=/oe/build/tmp/work/juno-linaro-linux/perf/1.0-r9/recipe-sysroot"
Like this:
$ python3
>>> from subprocess import Popen
>>> a = Popen(["aarch64-linux-gnu-gcc --sysroot=/oe/build/tmp/work/juno-linaro-linux/perf/1.0-r9/recipe-sysroot", "-v"])
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python3.6/subprocess.py", line 729, in __init__
restore_signals, start_new_session)
File "/usr/lib/python3.6/subprocess.py", line 1364, in _execute_child
raise child_exception_type(errno_num, err_msg, err_filename)
FileNotFoundError: [Errno 2] No such file or directory: 'aarch64-linux-gnu-gcc --sysroot=/oe/build/tmp/work/juno-linaro-linux/perf/1.0-r9/recipe-sysroot': 'aarch64-linux-gnu-gcc --sysroot=/oe/build/tmp/work/juno-linaro-linux/perf/1.0-r9/recipe-sysroot'
>>>
Make it more robust, covering this case, by passing cc.split()[0] as the
first arg to popen().
Fixes: a7ffd416d8 ("perf python: Fix clang detection when using CC=clang-version")
Reported-by: Daniel Díaz <daniel.diaz@linaro.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Daniel Díaz <daniel.diaz@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ilie Halip <ilie.halip@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200401124037.GA12534@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Python 3.8 changed the output of 'python-config --ldflags' to no longer
include the '-lpythonX.Y' flag (this apparently fixed an issue loading
modules with a statically linked Python executable). The libpython
feature check in linux/build/feature fails if the Python library is not
included in FEATURE_CHECK_LDFLAGS-libpython variable.
This adds a check in the Makefile to determine if PYTHON_CONFIG accepts
the '--embed' flag and passes that flag alongside '--ldflags' if so.
tools/perf is the only place the libpython feature check is used.
Signed-off-by: Sam Lunt <samuel.j.lunt@gmail.com>
Tested-by: He Zhe <zhe.he@windriver.com>
Link: http://lore.kernel.org/lkml/c56be2e1-8111-9dfe-8298-f7d0f9ab7431@windriver.com
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: trivial@kernel.org
Cc: stable@kernel.org
Link: http://lore.kernel.org/lkml/20200131181123.tmamivhq4b7uqasr@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
closedir(lang_dir) frees the memory of script_dirent->d_name, which
gets accessed in the next line in a call to scnprintf().
Valgrind report:
Invalid read of size 1
==413557== at 0x483CBE6: strlen (vg_replace_strmem.c:461)
==413557== by 0x4DD45FD: __vfprintf_internal (vfprintf-internal.c:1688)
==413557== by 0x4DE6679: __vsnprintf_internal (vsnprintf.c:114)
==413557== by 0x53A037: vsnprintf (stdio2.h:80)
==413557== by 0x53A037: scnprintf (vsprintf.c:21)
==413557== by 0x435202: get_script_path (builtin-script.c:3223)
==413557== Address 0x52e7313 is 1,139 bytes inside a block of size 32,816 free'd
==413557== at 0x483AA0C: free (vg_replace_malloc.c:540)
==413557== by 0x4E303C0: closedir (closedir.c:50)
==413557== by 0x4351DC: get_script_path (builtin-script.c:3222)
Signed-off-by: Andreas Gerstmayr <agerstmayr@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200402124337.419456-1-agerstmayr@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When running perf script report with a Python script and a callgraph in
DWARF mode, intr_regs->regs can be 0 and therefore crashing the regs_map
function.
Added a check for this condition (same check as in builtin-script.c:595).
Signed-off-by: Andreas Gerstmayr <agerstmayr@redhat.com>
Tested-by: Kim Phillips <kim.phillips@amd.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/20200402125417.422232-1-agerstmayr@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Capture both that this option exists and that symbols can be hexadecimal
addresses.
Signed-off-by: Ian Rogers <irogers@google.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200402174130.140319-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The kernel utilization metric does multiplexing currently and is somewhat
unreliable. The problem is that it uses two instances of the fixed counter,
and the kernel has to multipleplex which causes errors. So should use
CPU_CLK_UNHALTED.THREAD instead.
Before:
# perf stat -M Kernel_Utilization -- sleep 1
Performance counter stats for 'sleep 1':
1,419,425 cpu_clk_unhalted.ref_tsc:k
<not counted> cpu_clk_unhalted.ref_tsc (0.00%)
After:
# perf stat -M Kernel_Utilization -- sleep 1
Performance counter stats for 'sleep 1':
746,688 cpu_clk_unhalted.thread:k # 0.7 Kernel_Utilization
1,088,348 cpu_clk_unhalted.thread
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200309013125.7559-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf list expects CPU events to be parseable by name, e.g.
# perf list | grep el-capacity-read
el-capacity-read OR cpu/el-capacity-read/ [Kernel PMU event]
But the event parser does not recognize them that way, e.g.
# perf test -v "Parse event"
<SNIP>
running test 54 'cycles//u'
running test 55 'cycles:k'
running test 0 'cpu/config=10,config1,config2=3,period=1000/u'
running test 1 'cpu/config=1,name=krava/u,cpu/config=2/u'
running test 2 'cpu/config=1,call-graph=fp,time,period=100000/,cpu/config=2,call-graph=no,time=0,period=2000/'
running test 3 'cpu/name='COMPLEX_CYCLES_NAME:orig=cycles,desc=chip-clock-ticks',period=0x1,event=0x2/ukp'
-> cpu/event=0,umask=0x11/
-> cpu/event=0,umask=0x13/
-> cpu/event=0x54,umask=0x1/
failed to parse event 'el-capacity-read:u,cpu/event=el-capacity-read/u', err 1, str 'parser error'
event syntax error: 'el-capacity-read:u,cpu/event=el-capacity-read/u'
\___ parser error test child finished with 1
---- end ----
Parse event definition strings: FAILED!
This happens because the parser splits names by '-' in order to deal
with cache events. For example 'L1-dcache' is a token in
parse-events.l which is matched to 'L1-dcache-load-miss' by the
following rule:
PE_NAME_CACHE_TYPE '-' PE_NAME_CACHE_OP_RESULT '-' PE_NAME_CACHE_OP_RESULT opt_event_config
And so there is special handling for 2-part PMU names i.e.
PE_PMU_EVENT_PRE '-' PE_PMU_EVENT_SUF sep_dc
but no handling for 3-part names, which are instead added as tokens e.g.
topdown-[a-z-]+
While it would be possible to add a rule for 3-part names, that would
not work if the first parts were also a valid PMU name e.g.
'el-capacity-read' would be matched to 'el-capacity' before the parser
reached the 3rd part.
The parser would need significant change to rationalize all this, so
instead fix for now by adding missing Intel CPU events with 3-part names
to the event parser as tokens.
Missing events were found by using:
grep -r EVENT_ATTR_STR arch/x86/events/intel/core.c
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: http://lore.kernel.org/lkml/90c7ae07-c568-b6d3-f9c4-d0c1528a0610@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch extends the perf script --symbols option to filter on
hexadecimal addresses in addition to symbol names. This makes it easier
to handle cases where symbols are aliased.
With this patch, it is possible to mix and match symbols and hexadecimal
addresses using the --symbols option.
$ perf script --symbols=noploop,0x4007a0
Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200325220802.15039-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In d10ec006dc ("perf hists browser: Allow passing an initial hotkey")
the hist_entry__title() call was cut'n'pasted to a function where the
'title' variable is a pointer, not an array, so the sizeof(title)
continues syntactically valid but ends up reducing the real size of the
buffer where to format the first line in the screen to 8 bytes, which
makes the formatting at the title at each refresh to produce just the
string "Samples ", duh, fix it by passing the size of the buffer.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: d10ec006dc ("perf hists browser: Allow passing an initial hotkey")
Link: http://lore.kernel.org/lkml/20200330154314.GB4576@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It would be nice if we can use a hotkey in perf top browser to select a
event for sorting.
For example:
perf top --group -e cycles,instructions,cache-misses
Samples
Overhead Shared Object Symbol
40.03% 45.71% 0.03% div [.] main
20.46% 14.67% 0.21% libc-2.27.so [.] __random_r
20.01% 19.54% 0.02% libc-2.27.so [.] __random
9.68% 10.68% 0.00% div [.] compute_flag
4.32% 4.70% 0.00% libc-2.27.so [.] rand
3.84% 3.43% 0.00% div [.] rand@plt
0.05% 0.05% 2.33% libc-2.27.so [.] __strcmp_sse2_unaligned
0.04% 0.08% 2.43% perf [.] perf_hpp__is_dynamic_en
0.04% 0.02% 6.64% perf [.] rb_next
0.04% 0.01% 3.87% perf [.] dso__find_symbol
0.04% 0.04% 1.77% perf [.] sort__dso_cmp
When user press hotkey '2' (event index, starting from 0), it indicates
to sort output by the third event in group (cache-misses).
Samples
Overhead Shared Object Symbol
4.07% 1.28% 6.68% perf [.] rb_next
3.57% 3.98% 4.11% perf [.] __hists__insert_output
3.67% 11.24% 3.60% perf [.] perf_hpp__is_dynamic_e
3.67% 3.20% 3.20% perf [.] hpp__sort_overhead
0.81% 0.06% 3.01% perf [.] dso__find_symbol
1.62% 5.47% 2.51% perf [.] hists__match
2.70% 1.86% 2.47% libc-2.27.so [.] _int_malloc
0.19% 0.00% 2.29% [kernel] [k] copy_page
0.41% 0.32% 1.98% perf [.] hists__decay_entries
1.84% 3.67% 1.68% perf [.] sort__dso_cmp
0.16% 0.00% 1.63% [kernel] [k] clear_page_erms
Now the output is sorted by cache-misses.
v2:
---
Zero the history if hotkey is pressed.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200324220711.6025-2-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf report' supports the option --group-sort-idx, which sorts the
output by the event at the index n in event group.
For example:
perf record -e cycles,instructions,cache-misses
perf report --group --group-sort-idx 2 --stdio
The perf-report output is sorted by cache-misses.
This patch supports --group-sort-idx in perf-top.
For example:
perf top --group -e cycles,instructions,cache-misses --group-sort-idx 2
The perf-top output is sorted by cache-misses.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200324220711.6025-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
During execution of command 'perf report' in my arm64 virtual machine,
this error message is showed:
failed to process sample
__symbol__inc_addr_samples(860): ENOMEM! sym->name=__this_module,
start=0x1477100, addr=0x147dbd8, end=0x80002000, func: 0
The error is caused with path:
cmd_report
__cmd_report
perf_session__process_events
__perf_session__process_events
ordered_events__flush
__ordered_events__flush
oe->deliver (ordered_events__deliver_event)
perf_session__deliver_event
machines__deliver_event
perf_evlist__deliver_sample
tool->sample (process_sample_event)
hist_entry_iter__add
iter->add_entry_cb(hist_iter__report_callback)
hist_entry__inc_addr_samples
symbol__inc_addr_samples
__symbol__inc_addr_samples
h = annotated_source__histogram(src, evidx) (NULL)
annotated_source__histogram failed is caused with path:
...
hist_entry__inc_addr_samples
symbol__inc_addr_samples
symbol__hists
annotated_source__alloc_histograms
src->histograms = calloc(nr_hists, sizeof_sym_hist) (failed)
Calloc failed as the symbol__size(sym) is too huge. As show in error
message: start=0x1477100, end=0x80002000, size of symbol is about 2G.
This is the same problem as 'perf annotate: Fix s390 gap between kernel
end and module start (b9c0a64901)'. Perf gets symbol information from
/proc/kallsyms in __dso__load_kallsyms. A part of symbol in /proc/kallsyms
from my virtual machine is as follows:
#cat /proc/kallsyms | sort
...
ffff000001475080 d rpfilter_mt_reg [ip6t_rpfilter]
ffff000001475100 d $d [ip6t_rpfilter]
ffff000001475100 d __this_module [ip6t_rpfilter]
ffff000080080000 t _head
ffff000080080000 T _text
ffff000080080040 t pe_header
...
Take line 'ffff000001475100 d __this_module [ip6t_rpfilter]' as example.
The start and end of symbol are both set to ffff000001475100 in
dso__load_all_kallsyms. Then symbols__fixup_end will set the end of symbol
to next big address to ffff000001475100 in /proc/kallsyms, ffff000080080000
in this example. Then sizeof of symbol will be about 2G and cause the
problem.
The start of module in my machine is
ffff000000a62000 t $x [dm_mod]
The start of kernel in my machine is
ffff000080080000 t _head
There is a big gap between end of module and begin of kernel if a samll
amount of memory is used by module. And the last symbol in module will
have a large address range as caotaining the big gap.
Give that the module and kernel text segment sequence may change in
the future, fix this by limiting range of last symbol in module and kernel
to 4K in arch arm64.
Signed-off-by: Kemeng Shi <shikemeng@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hewenliang <hewenliang4@huawei.com>
Cc: Hu Shiyuan <hushiyuan@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lore.kernel.org/lkml/33fd24c4-0d5a-9d93-9b62-dffa97c992ca@huawei.com
[ refreshed the patch on current codebase, added string.h include as strchr() is used ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When one does:
$ make -C tools/perf build-test
The makefile in tools/perf/tests/ will, just like the main one, detect
how many cores are in the system and use it with -j.
Sometimes we may need to override that, for instance, when using
icecream or distcc to use multiple machines in the build process, then
we need to, as with the main makefile, use:
$ make JOBS=N -C tools/perf build-test
Fix the tests makefile to honour that.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200330130301.GA31702@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --all-cgroups option is to enable cgroup profiling support. It
tells kernel to record CGROUP events in the ring buffer so that 'perf
top' can identify task/cgroup association later.
Committer testing:
Use:
# perf top --all-cgroups -s cgroup_id,cgroup,pid
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200325124536.2800725-9-namhyung@kernel.org
Link: http://lore.kernel.org/lkml/20200402015249.3800462-1-namhyung@kernel.org
[ Extracted the HAVE_FILE_HANDLE from the followup patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds