The intent is that a given RCU read-side critical section be confined
to a single context. For example, it is illegal to invoke rcu_read_lock()
in an exception handler and then invoke rcu_read_unlock() from the
context of the task that received the exception.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The RCU implementations, including SRCU, are designed to be used in a
lock-like fashion, so that the read-side lock and unlock primitives must
execute in the same context for any given read-side critical section.
This constraint is enforced by lockdep-RCU. However, there is a need
to enter an SRCU read-side critical section within the context of an
exception and then exit in the context of the task that encountered the
exception. The cost of this capability is that the read-side operations
incur the overhead of disabling interrupts.
Note that although the current implementation allows a given read-side
critical section to be entered by one task and then exited by another, all
known possible implementations that allow this have scalability problems.
Therefore, a given read-side critical section must be exited by the same
task that entered it, though perhaps from an interrupt or exception
handler running within that task's context. But if you are thinking
in terms of interrupt handlers, make sure that you have considered the
possibility of threaded interrupt handlers.
Credit goes to Peter Zijlstra for suggesting use of the existing _raw
suffix to indicate disabling lockdep over the earlier "bulkref" names.
Requested-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
A common debug_lockdep_rcu_enabled() function is used to check whether
RCU lockdep splats should be reported, but srcu_read_lock() does not
use it. This commit therefore brings srcu_read_lock_held() up to date.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Catch SRCU up to the other variants of RCU by making PROVE_RCU
complain if either srcu_read_lock() or srcu_read_lock_held() are
used from within RCU-idle mode.
Frederic reworked this to allow for the new versions of his patches
that check for extended quiescent states.
Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
It is illegal to wait for an SRCU grace period while within the
corresponding flavor of SRCU read-side critical section. Therefore,
this commit updates the srcu_read_lock() docbook accordingly.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit provides definitions for the __rcu annotation defined earlier.
This annotation permits sparse to check for correct use of RCU-protected
pointers. If a pointer that is annotated with __rcu is accessed
directly (as opposed to via rcu_dereference(), rcu_assign_pointer(),
or one of their variants), sparse can be made to complain. To enable
such complaints, use the new default-disabled CONFIG_SPARSE_RCU_POINTER
kernel configuration option. Please note that these sparse complaints are
intended to be a debugging aid, -not- a code-style-enforcement mechanism.
There are special rcu_dereference_protected() and rcu_access_pointer()
accessors for use when RCU read-side protection is not required, for
example, when no other CPU has access to the data structure in question
or while the current CPU hold the update-side lock.
This patch also updates a number of docbook comments that were showing
their age.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Christopher Li <sparse@chrisli.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Add a #include for mutex.h to allow SRCU to be more easily used in
kernel modules.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Inspection is proving insufficient to catch all RCU misuses,
which is understandable given that rcu_dereference() might be
protected by any of four different flavors of RCU (RCU, RCU-bh,
RCU-sched, and SRCU), and might also/instead be protected by any
of a number of locking primitives. It is therefore time to
enlist the aid of lockdep.
This set of patches is inspired by earlier work by Peter
Zijlstra and Thomas Gleixner, and takes the following approach:
o Set up separate lockdep classes for RCU, RCU-bh, and RCU-sched.
o Set up separate lockdep classes for each instance of SRCU.
o Create primitives that check for being in an RCU read-side
critical section. These return exact answers if lockdep is
fully enabled, but if unsure, report being in an RCU read-side
critical section. (We want to avoid false positives!)
The primitives are:
For RCU: rcu_read_lock_held(void)
For RCU-bh: rcu_read_lock_bh_held(void)
For RCU-sched: rcu_read_lock_sched_held(void)
For SRCU: srcu_read_lock_held(struct srcu_struct *sp)
o Add rcu_dereference_check(), which takes a second argument
in which one places a boolean expression based on the above
primitives and/or lockdep_is_held().
o A new kernel configuration parameter, CONFIG_PROVE_RCU, enables
rcu_dereference_check(). This depends on CONFIG_PROVE_LOCKING,
and should be quite helpful during the transition period while
CONFIG_PROVE_RCU-unaware patches are in flight.
The existing rcu_dereference() primitive does no checking, but
upcoming patches will change that.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <1266887105-1528-1-git-send-email-paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add __percpu sparse annotations to core subsystems.
These annotations are to make sparse consider percpu variables to be
in a different address space and warn if accessed without going
through percpu accessors. This patch doesn't affect normal builds.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-mm@kvack.org
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Eric Biederman <ebiederm@xmission.com>
This patch creates a synchronize_srcu_expedited() that uses
synchronize_sched_expedited() where synchronize_srcu()
uses synchronize_sched(). The synchronize_srcu() and
synchronize_srcu_expedited() functions become one-liners that
pass synchronize_sched() or synchronize_sched_expedited(),
repectively, to a new __synchronize_srcu() function.
While in the file, move the EXPORT_SYMBOL_GPL()s to immediately
follow the corresponding functions.
Requested-by: Avi Kivity <avi@redhat.com>
Tested-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
Cc: avi@redhat.com
LKML-Reference: <12565226354038-git-send-email->
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Currently the init_srcu_struct() routine has no way to report out-of-memory
errors. This patch (as761) makes it return -ENOMEM when the per-cpu data
allocation fails.
The patch also makes srcu_init_notifier_head() report a BUG if a notifier
head can't be initialized. Perhaps it should return -ENOMEM instead, but
in the most likely cases where this might occur I don't think any recovery
is possible. Notifier chains generally are not created dynamically.
[akpm@osdl.org: avoid statement-with-side-effect in macro]
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Paul E. McKenney <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch (as751) adds a new type of notifier chain, based on the SRCU
(Sleepable Read-Copy Update) primitives recently added to the kernel. An
SRCU notifier chain is much like a blocking notifier chain, in that it must
be called in process context and its callout routines are allowed to sleep.
The difference is that the chain's links are protected by the SRCU
mechanism rather than by an rw-semaphore, so calling the chain has
extremely low overhead: no memory barriers and no cache-line bouncing. On
the other hand, unregistering from the chain is expensive and the chain
head requires special runtime initialization (plus cleanup if it is to be
deallocated).
SRCU notifiers are appropriate for notifiers that will be called very
frequently and for which unregistration occurs very seldom. The proposed
"task notifier" scheme qualifies, as may some of the network notifiers.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Paul E. McKenney <paulmck@us.ibm.com>
Acked-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Updated patch adding a variant of RCU that permits sleeping in read-side
critical sections. SRCU is as follows:
o Each use of SRCU creates its own srcu_struct, and each
srcu_struct has its own set of grace periods. This is
critical, as it prevents one subsystem with a blocking
reader from holding up SRCU grace periods for other
subsystems.
o The SRCU primitives (srcu_read_lock(), srcu_read_unlock(),
and synchronize_srcu()) all take a pointer to a srcu_struct.
o The SRCU primitives must be called from process context.
o srcu_read_lock() returns an int that must be passed to
the matching srcu_read_unlock(). Realtime RCU avoids the
need for this by storing the state in the task struct,
but SRCU needs to allow a given code path to pass through
multiple SRCU domains -- storing state in the task struct
would therefore require either arbitrary space in the
task struct or arbitrary limits on SRCU nesting. So I
kicked the state-storage problem up to the caller.
Of course, it is not permitted to call synchronize_srcu()
while in an SRCU read-side critical section.
o There is no call_srcu(). It would not be hard to implement
one, but it seems like too easy a way to OOM the system.
(Hey, we have enough trouble with call_rcu(), which does
-not- permit readers to sleep!!!) So, if you want it,
please tell me why...
[josht@us.ibm.com: sparse notation]
Signed-off-by: Paul E. McKenney <paulmck@us.ibm.com>
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Paul E. McKenney