Move the logic of grabbing the next message from the queue into its own
function. Like ceph_con_in_msg_alloc(), this is protocol independent.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
ceph_con_in_msg_alloc() is protocol independent, but con->in_hdr (and
struct ceph_msg_header in general) is msgr1 specific. While the struct
is deeply ingrained inside and outside the messenger, con->in_hdr field
can be separated.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Stick with pr_info message because session reset isn't an error most of
the time. When it is (i.e. if the server denies the reconnect attempt),
we get a bunch of other pr_err messages.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
con->peer_global_seq is part of session state. Clear it when
the server tells us to reset, not just in ceph_con_close().
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Move protocol reset bits into ceph_con_reset_protocol(), leaving
just session reset bits.
Note that con->out_skip is now reset on faults. This fixes a crash
in the case of a stateful session getting a fault while in the middle
of revoking a message.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
A fault due to a version mismatch or a feature set mismatch used to be
treated differently from other faults: the connection would get closed
without trying to reconnect and there was a ->bad_proto() connection op
for notifying about that.
This changed a long time ago, see commits 6384bb8b8e ("libceph: kill
bad_proto ceph connection op") and 0fa6ebc600 ("libceph: fix protocol
feature mismatch failure path"). Nowadays these aren't any different
from other faults (i.e. we try to reconnect even though the mismatch
won't resolve until the server is replaced). reset_connection() calls
there are rather confusing because reset_connection() resets a session
together an individual instance of the protocol. This is cleaned up
in the next patch.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The current setting allows the backoff to climb up to 5 minutes. This
is too high -- it becomes hard to tell whether the client is stuck on
something or just in backoff.
In userspace, ms_max_backoff is defaulted to 15 seconds. Let's do the
same.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
con->out_msg must be cleared on Policy::stateful_server
(!CEPH_MSG_CONNECT_LOSSY) faults. Not doing so botches the
reconnection attempt, because after writing the banner the
messenger moves on to writing the data section of that message
(either from where it got interrupted by the connection reset or
from the beginning) instead of writing struct ceph_msg_connect.
This results in a bizarre error message because the server
sends CEPH_MSGR_TAG_BADPROTOVER but we think we wrote struct
ceph_msg_connect:
libceph: mds0 (1)172.21.15.45:6828 socket error on write
ceph: mds0 reconnect start
libceph: mds0 (1)172.21.15.45:6829 socket closed (con state OPEN)
libceph: mds0 (1)172.21.15.45:6829 protocol version mismatch, my 32 != server's 32
libceph: mds0 (1)172.21.15.45:6829 protocol version mismatch
AFAICT this bug goes back to the dawn of the kernel client.
The reason it survived for so long is that only MDS sessions
are stateful and only two MDS messages have a data section:
CEPH_MSG_CLIENT_RECONNECT (always, but reconnecting is rare)
and CEPH_MSG_CLIENT_REQUEST (only when xattrs are involved).
The connection has to get reset precisely when such message
is being sent -- in this case it was the former.
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/47723
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
The queued con->work can start executing (and therefore logging)
before we get to this "con->work has been queued" message, making
the logs confusing. Move it up, with the meaning of "con->work
is about to be queued".
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In libceph, ceph_tcp_sendpage() does the following checks before handle
the page by network layer's zero copy sendpage method,
if (page_count(page) >= 1 && !PageSlab(page))
This check is exactly what sendpage_ok() does. This patch replace the
open coded checks by sendpage_ok() as a code cleanup.
Signed-off-by: Coly Li <colyli@suse.de>
Acked-by: Jeff Layton <jlayton@kernel.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a helper to directly set the TCP_NODELAY sockopt from kernel space
without going through a fake uaccess. Cleanup the callers to avoid
pointless wrappers now that this is a simple function call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make it so that CEPH_MSG_DATA_PAGES data item can own pages,
fixing a bunch of memory leaks for a page vector allocated in
alloc_msg_with_page_vector(). Currently, only watch-notify
messages trigger this allocation, and normally the page vector
is freed either in handle_watch_notify() or by the caller of
ceph_osdc_notify(). But if the message is freed before that
(e.g. if the session faults while reading in the message or
if the notify is stale), we leak the page vector.
This was supposed to be fixed by switching to a message-owned
pagelist, but that never happened.
Fixes: 1907920324 ("libceph: support for sending notifies")
Reported-by: Roman Penyaev <rpenyaev@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Roman Penyaev <rpenyaev@suse.de>
Convert the ceph filesystem to the new internal mount API as the old
one will be obsoleted and removed. This allows greater flexibility in
communication of mount parameters between userspace, the VFS and the
filesystem.
See Documentation/filesystems/mount_api.txt for more information.
[ Numerous string handling, leak and regression fixes; rbd conversion
was particularly broken and had to be redone almost from scratch. ]
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This function also re-open connections to OSD/MON, and re-send in-flight
OSD requests after re-opening connections to OSD.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
- support for rbd object-map and fast-diff features (myself). This
will speed up reads, discards and things like snap diffs on sparse
images.
- ceph.snap.btime vxattr to expose snapshot creation time (David
Disseldorp). This will be used to integrate with "Restore Previous
Versions" feature added in Windows 7 for folks who reexport ceph
through SMB.
- security xattrs for ceph (Zheng Yan). Only selinux is supported
for now due to the limitations of ->dentry_init_security().
- support for MSG_ADDR2, FS_BTIME and FS_CHANGE_ATTR features (Jeff
Layton). This is actually a single feature bit which was missing
because of the filesystem pieces. With this in, the kernel client
will finally be reported as "luminous" by "ceph features" -- it is
still being reported as "jewel" even though all required Luminous
features were implemented in 4.13.
- stop NULL-terminating ceph vxattrs (Jeff Layton). The convention
with xattrs is to not terminate and this was causing inconsistencies
with ceph-fuse.
- change filesystem time granularity from 1 us to 1 ns, again fixing
an inconsistency with ceph-fuse (Luis Henriques).
On top of this there are some additional dentry name handling and cap
flushing fixes from Zheng. Finally, Jeff is formally taking over for
Zheng as the filesystem maintainer.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAl0u+X8THGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi9byB/9fIxzoxtDMvixtJabuGSJRtlijDlWF
GlO6yIWCXl/8v8easR2PCF75U/xv0+QFQmze8PVi8u4Xz589P247NnEuyEZ9n84i
aCavARho6QLZPEL+B04NaqoHBl+ORKQTA6eKGhyKwRp/rn83z5Ubuw2tN7krHT3b
kCY61FuTQGxNY2o/WKv/iLwINYr7H23hCf0WwyyKH1bp7OegiQ14Ebn1NtfS3sMx
hS6h8Ya826vmUW0bCSS/9kzKYBCjksTig0HphUOHq6BoZJs++0b7GukIulRyuLfD
J9Gr9HGPoDCVzdmFfpn2FSlxdmqfO9amUSagd0ftLQfFlPlrpoULi0GW
=Bgxr
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.3-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"Lots of exciting things this time!
- support for rbd object-map and fast-diff features (myself). This
will speed up reads, discards and things like snap diffs on sparse
images.
- ceph.snap.btime vxattr to expose snapshot creation time (David
Disseldorp). This will be used to integrate with "Restore Previous
Versions" feature added in Windows 7 for folks who reexport ceph
through SMB.
- security xattrs for ceph (Zheng Yan). Only selinux is supported for
now due to the limitations of ->dentry_init_security().
- support for MSG_ADDR2, FS_BTIME and FS_CHANGE_ATTR features (Jeff
Layton). This is actually a single feature bit which was missing
because of the filesystem pieces. With this in, the kernel client
will finally be reported as "luminous" by "ceph features" -- it is
still being reported as "jewel" even though all required Luminous
features were implemented in 4.13.
- stop NULL-terminating ceph vxattrs (Jeff Layton). The convention
with xattrs is to not terminate and this was causing
inconsistencies with ceph-fuse.
- change filesystem time granularity from 1 us to 1 ns, again fixing
an inconsistency with ceph-fuse (Luis Henriques).
On top of this there are some additional dentry name handling and cap
flushing fixes from Zheng. Finally, Jeff is formally taking over for
Zheng as the filesystem maintainer"
* tag 'ceph-for-5.3-rc1' of git://github.com/ceph/ceph-client: (71 commits)
ceph: fix end offset in truncate_inode_pages_range call
ceph: use generic_delete_inode() for ->drop_inode
ceph: use ceph_evict_inode to cleanup inode's resource
ceph: initialize superblock s_time_gran to 1
MAINTAINERS: take over for Zheng as CephFS kernel client maintainer
rbd: setallochint only if object doesn't exist
rbd: support for object-map and fast-diff
rbd: call rbd_dev_mapping_set() from rbd_dev_image_probe()
libceph: export osd_req_op_data() macro
libceph: change ceph_osdc_call() to take page vector for response
libceph: bump CEPH_MSG_MAX_DATA_LEN (again)
rbd: new exclusive lock wait/wake code
rbd: quiescing lock should wait for image requests
rbd: lock should be quiesced on reacquire
rbd: introduce copyup state machine
rbd: rename rbd_obj_setup_*() to rbd_obj_init_*()
rbd: move OSD request allocation into object request state machines
rbd: factor out __rbd_osd_setup_discard_ops()
rbd: factor out rbd_osd_setup_copyup()
rbd: introduce obj_req->osd_reqs list
...
...ditto for the decode function. We only use these functions to fix
up banner addresses now, so let's name them more appropriately.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Going forward, we'll have different address types so let's use
the addr2 TYPE_LEGACY for internal tracking rather than TYPE_NONE.
Also, make ceph_pr_addr print the address type value as well.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
It doesn't make sense to leave it undecoded until later.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
-----BEGIN PGP SIGNATURE-----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=2q2Y
-----END PGP SIGNATURE-----
Merge tag 'afs-fixes-20190516' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull misc AFS fixes from David Howells:
"This fixes a set of miscellaneous issues in the afs filesystem,
including:
- leak of keys on file close.
- broken error handling in xattr functions.
- missing locking when updating VL server list.
- volume location server DNS lookup whereby preloaded cells may not
ever get a lookup and regular DNS lookups to maintain server lists
consume power unnecessarily.
- incorrect error propagation and handling in the fileserver
iteration code causes operations to sometimes apparently succeed.
- interruption of server record check/update side op during
fileserver iteration causes uninterruptible main operations to fail
unexpectedly.
- callback promise expiry time miscalculation.
- over invalidation of the callback promise on directories.
- double locking on callback break waking up file locking waiters.
- double increment of the vnode callback break counter.
Note that it makes some changes outside of the afs code, including:
- an extra parameter to dns_query() to allow the dns_resolver key
just accessed to be immediately invalidated. AFS is caching the
results itself, so the key can be discarded.
- an interruptible version of wait_var_event().
- an rxrpc function to allow the maximum lifespan to be set on a
call.
- a way for an rxrpc call to be marked as non-interruptible"
* tag 'afs-fixes-20190516' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Fix double inc of vnode->cb_break
afs: Fix lock-wait/callback-break double locking
afs: Don't invalidate callback if AFS_VNODE_DIR_VALID not set
afs: Fix calculation of callback expiry time
afs: Make dynamic root population wait uninterruptibly for proc_cells_lock
afs: Make some RPC operations non-interruptible
rxrpc: Allow the kernel to mark a call as being non-interruptible
afs: Fix error propagation from server record check/update
afs: Fix the maximum lifespan of VL and probe calls
rxrpc: Provide kernel interface to set max lifespan on a call
afs: Fix "kAFS: AFS vnode with undefined type 0"
afs: Fix cell DNS lookup
Add wait_var_event_interruptible()
dns_resolver: Allow used keys to be invalidated
afs: Fix afs_cell records to always have a VL server list record
afs: Fix missing lock when replacing VL server list
afs: Fix afs_xattr_get_yfs() to not try freeing an error value
afs: Fix incorrect error handling in afs_xattr_get_acl()
afs: Fix key leak in afs_release() and afs_evict_inode()
Allow used DNS resolver keys to be invalidated after use if the caller is
doing its own caching of the results. This reduces the amount of resources
required.
Fix AFS to invalidate DNS results to kill off permanent failure records
that get lodged in the resolver keyring and prevent future lookups from
happening.
Fixes: 0a5143f2f8 ("afs: Implement VL server rotation")
Signed-off-by: David Howells <dhowells@redhat.com>
GCC9 is throwing a lot of warnings about unaligned accesses by
callers of ceph_pr_addr. All of the current callers are passing a
pointer to the sockaddr inside struct ceph_entity_addr.
Fix it to take a pointer to a struct ceph_entity_addr instead,
and then have the function make a copy of the sockaddr before
printing it.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
GCC9 is throwing a lot of warnings about unaligned access. This patch
fixes some of them by changing most of the sockaddr handling functions
to take a pointer to struct ceph_entity_addr instead of struct
sockaddr_storage. The lower functions can then make copies or do
unaligned accesses as needed.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
A bvec can now consist of multiple physically contiguous pages.
This means that bvec_iter_advance() can move to a different page while
staying in the same bvec (i.e. ->bi_bvec_done != 0).
The messenger works in terms of segments which can now be defined as
the smaller of a bvec and a page. The "more bytes to process in this
segment" condition holds only if bvec_iter_advance() leaves us in the
same bvec _and_ in the same page. On next bvec (possibly in the same
page) and on next page (possibly in the same bvec) we may need to set
->last_piece.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The authorize reply can be empty, for example when the ticket used to
build the authorizer is too old and TAG_BADAUTHORIZER is returned from
the service. Calling ->verify_authorizer_reply() results in an attempt
to decrypt and validate (somewhat) random data in au->buf (most likely
the signature block from calc_signature()), which fails and ends up in
con_fault_finish() with !con->auth_retry. The ticket isn't invalidated
and the connection is retried again and again until a new ticket is
obtained from the monitor:
libceph: osd2 192.168.122.1:6809 bad authorize reply
libceph: osd2 192.168.122.1:6809 bad authorize reply
libceph: osd2 192.168.122.1:6809 bad authorize reply
libceph: osd2 192.168.122.1:6809 bad authorize reply
Let TAG_BADAUTHORIZER handler kick in and increment con->auth_retry.
Cc: stable@vger.kernel.org
Fixes: 5c056fdc5b ("libceph: verify authorize reply on connect")
Link: https://tracker.ceph.com/issues/20164
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
con_fault() can transition the connection into STANDBY right after
ceph_con_keepalive() clears STANDBY in clear_standby():
libceph user thread ceph-msgr worker
ceph_con_keepalive()
mutex_lock(&con->mutex)
clear_standby(con)
mutex_unlock(&con->mutex)
mutex_lock(&con->mutex)
con_fault()
...
if KEEPALIVE_PENDING isn't set
set state to STANDBY
...
mutex_unlock(&con->mutex)
set KEEPALIVE_PENDING
set WRITE_PENDING
This triggers warnings in clear_standby() when either ceph_con_send()
or ceph_con_keepalive() get to clearing STANDBY next time.
I don't see a reason to condition queue_con() call on the previous
value of KEEPALIVE_PENDING, so move the setting of KEEPALIVE_PENDING
into the critical section -- unlike WRITE_PENDING, KEEPALIVE_PENDING
could have been a non-atomic flag.
Reported-by: syzbot+acdeb633f6211ccdf886@syzkaller.appspotmail.com
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Tested-by: Myungho Jung <mhjungk@gmail.com>
Prevent do_tcp_sendpages() from calling tcp_push() (at least) once per
page. Instead, arrange for tcp_push() to be called (at least) once per
data payload. This results in more MSS-sized packets and fewer packets
overall (5-10% reduction in my tests with typical OSD request sizes).
See commits 2f53384424 ("tcp: allow splice() to build full TSO
packets"), 35f9c09fe9 ("tcp: tcp_sendpages() should call tcp_push()
once") and ae62ca7b03 ("tcp: fix MSG_SENDPAGE_NOTLAST logic") for
details.
Here is an example of a packet size histogram for 128K OSD requests
(MSS = 1448, top 5):
Before:
SIZE COUNT
1448 777700
952 127915
1200 39238
1219 9806
21 5675
After:
SIZE COUNT
1448 897280
21 6201
1019 2797
643 2739
376 2479
We could do slightly better by explicitly corking the socket but it's
not clear it's worth it.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
sock_no_sendpage() makes the code cleaner.
Also, don't set MSG_EOR. sendpage doesn't act on MSG_EOR on its own,
it just honors the setting from the preceding sendmsg call by looking
at ->eor in tcp_skb_can_collapse_to().
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
last_piece is for the last piece in the current data item, not in the
entire data payload of the message. This is harmful for messages with
multiple data items. On top of that, we don't need to signal the end
of a data payload either because it is always followed by a footer.
We used to signal "more" unconditionally, until commit fe38a2b67b
("libceph: start defining message data cursor"). Part of a large
series, it introduced cursor->last_piece and also mistakenly inverted
the hint by passing last_piece for "more". This was corrected with
commit c2cfa19400 ("libceph: Fix ceph_tcp_sendpage()'s more boolean
usage").
As it is, last_piece is not helping at all: because Nagle algorithm is
disabled, for a simple message with two 512-byte data items we end up
emitting three packets: front + first data item, second data item and
footer. Go back to the original pre-fe38a2b67bc6 behavior -- a single
packet in most cases.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
skb_can_coalesce() allows coalescing neighboring slab objects into
a single frag:
return page == skb_frag_page(frag) &&
off == frag->page_offset + skb_frag_size(frag);
ceph_tcp_sendpage() can be handed slab pages. One example of this is
XFS: it passes down sector sized slab objects for its metadata I/O. If
the kernel client is co-located on the OSD node, the skb may go through
loopback and pop on the receive side with the exact same set of frags.
When tcp_recvmsg() attempts to copy out such a frag, hardened usercopy
complains because the size exceeds the object's allocated size:
usercopy: kernel memory exposure attempt detected from ffff9ba917f20a00 (kmalloc-512) (1024 bytes)
Although skb_can_coalesce() could be taught to return false if the
resulting frag would cross a slab object boundary, we already have
a fallback for non-refcounted pages. Utilize it for slab pages too.
Cc: stable@vger.kernel.org # 4.8+
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Pull AFS updates from Al Viro:
"AFS series, with some iov_iter bits included"
* 'work.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits)
missing bits of "iov_iter: Separate type from direction and use accessor functions"
afs: Probe multiple fileservers simultaneously
afs: Fix callback handling
afs: Eliminate the address pointer from the address list cursor
afs: Allow dumping of server cursor on operation failure
afs: Implement YFS support in the fs client
afs: Expand data structure fields to support YFS
afs: Get the target vnode in afs_rmdir() and get a callback on it
afs: Calc callback expiry in op reply delivery
afs: Fix FS.FetchStatus delivery from updating wrong vnode
afs: Implement the YFS cache manager service
afs: Remove callback details from afs_callback_break struct
afs: Commit the status on a new file/dir/symlink
afs: Increase to 64-bit volume ID and 96-bit vnode ID for YFS
afs: Don't invoke the server to read data beyond EOF
afs: Add a couple of tracepoints to log I/O errors
afs: Handle EIO from delivery function
afs: Fix TTL on VL server and address lists
afs: Implement VL server rotation
afs: Improve FS server rotation error handling
...
In the iov_iter struct, separate the iterator type from the iterator
direction and use accessor functions to access them in most places.
Convert a bunch of places to use switch-statements to access them rather
then chains of bitwise-AND statements. This makes it easier to add further
iterator types. Also, this can be more efficient as to implement a switch
of small contiguous integers, the compiler can use ~50% fewer compare
instructions than it has to use bitwise-and instructions.
Further, cease passing the iterator type into the iterator setup function.
The iterator function can set that itself. Only the direction is required.
Signed-off-by: David Howells <dhowells@redhat.com>
Currently message data items are allocated with ceph_msg_data_create()
in setup_request_data() inside send_request(). send_request() has never
been allowed to fail, so each allocation is followed by a BUG_ON:
data = ceph_msg_data_create(...);
BUG_ON(!data);
It's been this way since support for multiple message data items was
added in commit 6644ed7b7e ("libceph: make message data be a pointer")
in 3.10.
There is no reason to delay the allocation of message data items until
the last possible moment and we certainly don't need a linked list of
them as they are only ever appended to the end and never erased. Make
ceph_msg_new2() take max_data_items and adapt the rest of the code.
Reported-by: Jerry Lee <leisurelysw24@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Because send_mds_reconnect() wants to send a message with a pagelist
and pass the ownership to the messenger, ceph_msg_data_add_pagelist()
consumes a ref which is then put in ceph_msg_data_destroy(). This
makes managing pagelists in the OSD client (where they are wrapped in
ceph_osd_data) unnecessarily hard because the handoff only happens in
ceph_osdc_start_request() instead of when the pagelist is passed to
ceph_osd_data_pagelist_init(). I counted several memory leaks on
various error paths.
Fix up ceph_msg_data_add_pagelist() and carry a pagelist ref in
ceph_osd_data.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Avoid scribbling over memory if the received reply/challenge is larger
than the buffer supplied with the authorizer.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
When a client authenticates with a service, an authorizer is sent with
a nonce to the service (ceph_x_authorize_[ab]) and the service responds
with a mutation of that nonce (ceph_x_authorize_reply). This lets the
client verify the service is who it says it is but it doesn't protect
against a replay: someone can trivially capture the exchange and reuse
the same authorizer to authenticate themselves.
Allow the service to reject an initial authorizer with a random
challenge (ceph_x_authorize_challenge). The client then has to respond
with an updated authorizer proving they are able to decrypt the
service's challenge and that the new authorizer was produced for this
specific connection instance.
The accepting side requires this challenge and response unconditionally
if the client side advertises they have CEPHX_V2 feature bit.
This addresses CVE-2018-1128.
Link: http://tracker.ceph.com/issues/24836
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Will be used for sending ceph_msg_connect with an updated authorizer,
after the server challenges the initial authorizer.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
We already copy authorizer_reply_buf and authorizer_reply_buf_len into
ceph_connection. Factoring out __prepare_write_connect() requires two
more: authorizer_buf and authorizer_buf_len. Store the pointer to the
handshake in con->auth rather than piling on.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Sage Weil <sage@redhat.com>
ceph_con_keepalive_expired() is the last user of timespec_add() and some
of the last uses of ktime_get_real_ts(). Replacing this with timespec64
based interfaces lets us remove that deprecated API.
I'm introducing new ceph_encode_timespec64()/ceph_decode_timespec64()
here that take timespec64 structures and convert to/from ceph_timespec,
which is defined to have an unsigned 32-bit tv_sec member. This extends
the range of valid times to year 2106, avoiding the year 2038 overflow.
The ceph file system portion still uses the old functions for inode
timestamps, this will be done separately after the VFS layer is converted.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
All gotos to "more" are conditioned on con->state == OPEN, but the only
thing "more" does is opening the socket if con->state == PREOPEN. Kill
that label and rename "more_kvec" to "more".
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
ceph_con_workfn() validates con->state before calling try_read() and
then try_write(). However, try_read() temporarily releases con->mutex,
notably in process_message() and ceph_con_in_msg_alloc(), opening the
window for ceph_con_close() to sneak in, close the connection and
release con->sock. When try_write() is called on the assumption that
con->state is still valid (i.e. not STANDBY or CLOSED), a NULL sock
gets passed to the networking stack:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
IP: selinux_socket_sendmsg+0x5/0x20
Make sure con->state is valid at the top of try_write() and add an
explicit BUG_ON for this, similar to try_read().
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/23706
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Ilya Dryomov