Since a 64-bit BAR consists of a BAR pair, we need to write to both
BARs in the BAR pair to setup the BAR properly.
Link: https://lkml.kernel.org/r/20180328115018.31921-7-niklas.cassel@axis.com
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
[lorenzo.pieralisi@arm.com: updated code according to review]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Setting a BAR size > 4 GB is invalid if PCI_BASE_ADDRESS_MEM_TYPE_64
flag is not set.
This sanity check is done in pci_epc_set_bar(), so that we don't need
to do this sanity check in all epc->ops->set_bar() implementations.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
If flag PCI_BASE_ADDRESS_SPACE_IO is set, also having any
PCI_BASE_ADDRESS_MEM_* bit set is invalid.
This sanity check is done in pci_epc_set_bar(), so that we don't need
to do this sanity check in all epc->ops->set_bar() implementations.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Since a 64-bit BAR consists of a BAR pair, and since there is no
BAR after BAR_5, BAR_5 cannot be 64-bits wide.
This sanity check is done in pci_epc_set_bar(), so that we don't need
to do this sanity check in all epc->ops->set_bar() implementations.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Add barno and flags to struct epf_bar.
That way we can simplify epc->ops->set_bar()/pci_epc_set_bar()
by passing a struct *epf_bar instead of a whole lot of arguments.
This is needed so that epc->ops->set_bar() implementations can
modify BAR flags. Will be utilized in a succeeding patch.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
If a BAR supports 64-bit width or not depends on the hardware,
and should thus not depend on sizeof(dma_addr_t).
If a certain hardware doesn't support 64-bit BARs, its
epc->ops->set_bar() implementation should return -EINVAL
when PCI_BASE_ADDRESS_MEM_TYPE_64 is set.
We can't change pci_epc_set_bar() to only set
PCI_BASE_ADDRESS_MEM_TYPE_64 based on size, since if the user,
for some reason, wants to configure a BAR with a 64-bit width,
even though the BAR size is less than 4 GB, he should be able
to do that.
However, since pci-epf-test is simply a test and not an API,
we can set PCI_BASE_ADDRESS_MEM_TYPE_64 in pci-epf-test itself
only based on size.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
This removes the entire architecture code for blackfin, cris, frv, m32r,
metag, mn10300, score, and tile, including the associated device drivers.
I have been working with the (former) maintainers for each one to ensure
that my interpretation was right and the code is definitely unused in
mainline kernels. Many had fond memories of working on the respective
ports to start with and getting them included in upstream, but also saw
no point in keeping the port alive without any users.
In the end, it seems that while the eight architectures are extremely
different, they all suffered the same fate: There was one company
in charge of an SoC line, a CPU microarchitecture and a software
ecosystem, which was more costly than licensing newer off-the-shelf
CPU cores from a third party (typically ARM, MIPS, or RISC-V). It seems
that all the SoC product lines are still around, but have not used the
custom CPU architectures for several years at this point. In contrast,
CPU instruction sets that remain popular and have actively maintained
kernel ports tend to all be used across multiple licensees.
The removal came out of a discussion that is now documented at
https://lwn.net/Articles/748074/. Unlike the original plans, I'm not
marking any ports as deprecated but remove them all at once after I made
sure that they are all unused. Some architectures (notably tile, mn10300,
and blackfin) are still being shipped in products with old kernels,
but those products will never be updated to newer kernel releases.
After this series, we still have a few architectures without mainline
gcc support:
- unicore32 and hexagon both have very outdated gcc releases, but the
maintainers promised to work on providing something newer. At least
in case of hexagon, this will only be llvm, not gcc.
- openrisc, risc-v and nds32 are still in the process of finishing their
support or getting it added to mainline gcc in the first place.
They all have patched gcc-7.3 ports that work to some degree, but
complete upstream support won't happen before gcc-8.1. Csky posted
their first kernel patch set last week, their situation will be similar.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJawdL2AAoJEGCrR//JCVInuH0P/RJAZh1nTD+TR34ZhJq2TBoo
PgygwDU7Z2+tQVU+EZ453Gywz9/NMRFk1RWAZqrLix4ZtyIMvC6A1qfT2yH1Y7Fb
Qh6tccQeLe4ezq5u4S/46R/fQXu3Txr92yVwzJJUuPyU0arF9rv5MmI8e6p7L1en
yb74kSEaCe+/eMlsEj1Cc1dgthDNXGKIURHkRsILoweysCpesjiTg4qDcL+yTibV
FP2wjVbniKESMKS6qL71tiT5sexvLsLwMNcGiHPj94qCIQuI7DLhLdBVsL5Su6gI
sbtgv0dsq4auRYAbQdMaH1hFvu6WptsuttIbOMnz2Yegi2z28H8uVXkbk2WVLbqG
ZESUwutGh8MzOL2RJ4jyyQq5sfo++CRGlfKjr6ImZRv03dv0pe/W85062cK5cKNs
cgDDJjGRorOXW7dyU6jG2gRqODOQBObIv3w5efdq5OgzOWlbI4EC+Y5u1Z0JF/76
pSwtGXA6YhwC+9LLAlnVTHG+yOwuLmAICgoKcTbzTVDKA2YQZG/cYuQfI5S1wD8e
X6urPx3Md2GCwLXQ9mzKBzKZUpu/Tuhx0NvwF4qVxy6x1PELjn68zuP7abDHr46r
57/09ooVN+iXXnEGMtQVS/OPvYHSa2NgTSZz6Y86lCRbZmUOOlK31RDNlMvYNA+s
3iIVHovno/JuJnTOE8LY
=fQ8z
-----END PGP SIGNATURE-----
Merge tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pul removal of obsolete architecture ports from Arnd Bergmann:
"This removes the entire architecture code for blackfin, cris, frv,
m32r, metag, mn10300, score, and tile, including the associated device
drivers.
I have been working with the (former) maintainers for each one to
ensure that my interpretation was right and the code is definitely
unused in mainline kernels. Many had fond memories of working on the
respective ports to start with and getting them included in upstream,
but also saw no point in keeping the port alive without any users.
In the end, it seems that while the eight architectures are extremely
different, they all suffered the same fate: There was one company in
charge of an SoC line, a CPU microarchitecture and a software
ecosystem, which was more costly than licensing newer off-the-shelf
CPU cores from a third party (typically ARM, MIPS, or RISC-V). It
seems that all the SoC product lines are still around, but have not
used the custom CPU architectures for several years at this point. In
contrast, CPU instruction sets that remain popular and have actively
maintained kernel ports tend to all be used across multiple licensees.
[ See the new nds32 port merged in the previous commit for the next
generation of "one company in charge of an SoC line, a CPU
microarchitecture and a software ecosystem" - Linus ]
The removal came out of a discussion that is now documented at
https://lwn.net/Articles/748074/. Unlike the original plans, I'm not
marking any ports as deprecated but remove them all at once after I
made sure that they are all unused. Some architectures (notably tile,
mn10300, and blackfin) are still being shipped in products with old
kernels, but those products will never be updated to newer kernel
releases.
After this series, we still have a few architectures without mainline
gcc support:
- unicore32 and hexagon both have very outdated gcc releases, but the
maintainers promised to work on providing something newer. At least
in case of hexagon, this will only be llvm, not gcc.
- openrisc, risc-v and nds32 are still in the process of finishing
their support or getting it added to mainline gcc in the first
place. They all have patched gcc-7.3 ports that work to some
degree, but complete upstream support won't happen before gcc-8.1.
Csky posted their first kernel patch set last week, their situation
will be similar
[ Palmer Dabbelt points out that RISC-V support is in mainline gcc
since gcc-7, although gcc-7.3.0 is the recommended minimum - Linus ]"
This really says it all:
2498 files changed, 95 insertions(+), 467668 deletions(-)
* tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (74 commits)
MAINTAINERS: UNICORE32: Change email account
staging: iio: remove iio-trig-bfin-timer driver
tty: hvc: remove tile driver
tty: remove bfin_jtag_comm and hvc_bfin_jtag drivers
serial: remove tile uart driver
serial: remove m32r_sio driver
serial: remove blackfin drivers
serial: remove cris/etrax uart drivers
usb: Remove Blackfin references in USB support
usb: isp1362: remove blackfin arch glue
usb: musb: remove blackfin port
usb: host: remove tilegx platform glue
pwm: remove pwm-bfin driver
i2c: remove bfin-twi driver
spi: remove blackfin related host drivers
watchdog: remove bfin_wdt driver
can: remove bfin_can driver
mmc: remove bfin_sdh driver
input: misc: remove blackfin rotary driver
input: keyboard: remove bf54x driver
...
Pull x86 platform updates from Ingo Molnar:
"The main changes in this cycle were:
- Add "Jailhouse" hypervisor support (Jan Kiszka)
- Update DeviceTree support (Ivan Gorinov)
- Improve DMI date handling (Andy Shevchenko)"
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/PCI: Fix a potential regression when using dmi_get_bios_year()
firmware/dmi_scan: Uninline dmi_get_bios_year() helper
x86/devicetree: Use CPU description from Device Tree
of/Documentation: Specify local APIC ID in "reg"
MAINTAINERS: Add entry for Jailhouse
x86/jailhouse: Allow to use PCI_MMCONFIG without ACPI
x86: Consolidate PCI_MMCONFIG configs
x86: Align x86_64 PCI_MMCONFIG with 32-bit variant
x86/jailhouse: Enable PCI mmconfig access in inmates
PCI: Scan all functions when running over Jailhouse
jailhouse: Provide detection for non-x86 systems
x86/devicetree: Fix device IRQ settings in DT
x86/devicetree: Initialize device tree before using it
pci: Simplify code by using the new dmi_get_bios_year() helper
ACPI/sleep: Simplify code by using the new dmi_get_bios_year() helper
x86/pci: Simplify code by using the new dmi_get_bios_year() helper
dmi: Introduce the dmi_get_bios_year() helper function
x86/platform/quark: Re-use DEFINE_SHOW_ATTRIBUTE() macro
x86/platform/atom: Re-use DEFINE_SHOW_ATTRIBUTE() macro
Rename pcie-dpc.c to dpc.c. The path "drivers/pci/pcie/pcie-dpc.c" has
more occurrences of "pci" than necessary.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cache some config data from VF0 and use it for all other VFs instead of
reading it from the config space of each VF. We assume these items are the
same across all associated VFs:
Revision ID
Class Code
Subsystem Vendor ID
Subsystem ID
This is an optimization when enabling SR-IOV on a device with many VFs.
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
[bhelgaas: changelog, simplify comments, remove unused "device", test
CONFIG_PCI_IOV instead of CONFIG_PCI_ATS, rename functions]
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Commit eed85ff4c0 ("PCI/DPC: Enable DPC only if AER is available") made
DPC control dependent whether AER is enabled in the OS. However, it does
not take into account situations where BIOS has not given OS control of
AER:
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
I think here it is better not to enable DPC even if the capability is
available because then it would be against what "Determination of DPC
Control" note in PCIe 4.0 sec 6.1.10 recommends.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Replace pci_find_ext_capability(..., PCI_EXT_CAP_ID_ERR) calls with
pci_dev->aer_cap.
pci_dev->aer_cap is initialized in pci_init_capabilities(), which happens
before any of these users of the AER Capability.
Signed-off-by: Frederick Lawler <fred@fredlawl.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The platform may restrict the OS's use of PCIe services, e.g., via the ACPI
_OSC method. The user may use "pcie_ports=native" to force the port driver
to use PCIe services even if the platform asked us not to.
The "pcie_ports=native" parameter determines the setting of
pcie_ports_auto. Rename this to pcie_ports_native and reverse the
sense to simplify the code.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
"pcie_ports_auto" is only used inside the PCIe port driver itself, so
move it from include/linux/pci.h to portdrv.h so it's not visible to the
whole kernel.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The "pcie_ports=auto" parameter set pcie_ports_disabled and pcie_ports_auto
to their compiled-in defaults, so specifying the parameter is the same as
not using it at all.
Remove the "pcie_ports=auto" parameter and update the documentation.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
7570a333d8 ("PCI: Add pcie_hp=nomsi to disable MSI/MSI-X for pciehp
driver") added the "pcie_hp=nomsi" kernel parameter to work around this
error on shutdown:
irq 16: nobody cared (try booting with the "irqpoll" option)
Pid: 1081, comm: reboot Not tainted 3.2.0 #1
...
Disabling IRQ #16
This happened on an unspecified system (possibly involving the Integrated
Device Technology, Inc. Device 807f bridge) where "an un-wanted interrupt
is generated when PCI driver switches from MSI/MSI-X to INTx while shutting
down the device."
The implication was that the device was buggy, but it is normal for a
device to use INTx after MSI/MSI-X have been disabled. The only problem
was that the driver was still attached and it wasn't prepared for INTx
interrupts. Prarit Bhargava fixed this issue with fda78d7a0e ("PCI/MSI:
Stop disabling MSI/MSI-X in pci_device_shutdown()").
There is no automated way to set this parameter, so it's not very useful
for distributions or end users. It's really only useful for debugging, and
we have "pci=nomsi" for that purpose.
Revert 7570a333d8 to remove the "pcie_hp=nomsi" parameter.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
CC: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com>
CC: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
CC: Prarit Bhargava <prarit@redhat.com>
portdrv_pci.c doesn't use anything from <linux/pci-aspm.h>. Remove the
include of it. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some PCIe features (AER, DPC, hotplug, PME) can be managed by either the
platform firmware or the OS, so the host bridge driver may have to request
permission from the platform before using them. On ACPI systems, this is
done by negotiate_os_control() in acpi_pci_root_add().
The PCIe port driver later uses pcie_port_platform_notify() and
pcie_port_acpi_setup() to figure out whether it can use these features.
But all we need is a single bit for each service, so these interfaces are
needlessly complicated.
Simplify this by adding bits in the struct pci_host_bridge to show when the
OS has permission to use each feature:
+ unsigned int native_aer:1; /* OS may use PCIe AER */
+ unsigned int native_hotplug:1; /* OS may use PCIe hotplug */
+ unsigned int native_pme:1; /* OS may use PCIe PME */
These are set when we create a host bridge, and the host bridge driver can
clear the bits corresponding to any feature the platform doesn't want us to
use.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
No driver registers for PCIE_PORT_SERVICE_VC, so remove it.
This removes the VC "service" files from /sys/bus/pci_express/devices,
e.g., 0000:07:00.0:pcie108, 0000:08:04.0:pcie208 (all the files that
contained "8" as the last digit of the "pcieXXX" part). The port driver
created these files for PCIe port devices that have a VC Capability.
Since this reduces PCIE_PORT_DEVICE_MAXSERVICES and moves DPC down into the
spot where VC used to be, the DPC sysfs files will now be named "pcieXX8".
I don't think there's anything useful userspace can do with those files, so
I hope nobody cares about these filenames.
There is no VC driver that calls pcie_port_service_register(), so there
never was a /sys/bus/pci_express/drivers/vc directory.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The pcie_port_bus_type must be registered before drivers that depend on it
can be registered. Those drivers include:
pcied_init() # PCIe native hotplug driver
aer_service_init() # AER driver
dpc_service_init() # DPC driver
pcie_pme_service_init() # PME driver
Previously we registered pcie_port_bus_type from pcie_portdrv_init(), a
device_initcall. The callers of pcie_port_service_register() (above) are
also device_initcalls. This is fragile because the device_initcall
ordering depends on link order, which is not explicit.
Register pcie_port_bus_type from pci_driver_init() along with pci_bus_type.
This removes the link order dependency between portdrv and the pciehp, AER,
DPC, and PCIe PME drivers.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The "pcie_ports=compat" kernel parameter sets pcie_ports_disabled, which is
intended to disable the PCIe port driver. But even when it was disabled,
we registered pcie_portdriver so we could work around a BIOS PME issue (see
fe31e69740 ("PCI/PCIe: Clear Root PME Status bits early during system
resume")).
Registering the driver meant that the pcie_portdrv_probe() path called
pci_enable_device(), pci_save_state(), pm_runtime_set_autosuspend_delay(),
pm_runtime_use_autosuspend(), etc., even when the driver was disabled.
We've since moved the BIOS PME workaround from the port driver to the core,
so stop registering the PCIe port driver in compat mode.
This means "pcie_ports=compat" will now be basically the same as turning
off CONFIG_PCIEPORTBUS completely.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Per PCIe r4.0, sec 6.1.6, Root Complex Event Collectors can generate PME
interrupts on behalf of Root Complex Integrated Endpoints.
Linux does not currently enable PME interrupts from RC Event Collectors,
but fe31e69740 ("PCI/PCIe: Clear Root PME Status bits early during system
resume") suggests PME interrupts may be enabled by the platform for ACPI-
based runtime wakeup.
Clear the PCIe PME Status bit for Root Complex Event Collectors during
resume, just like we already do for Root Ports.
If the BIOS enables PME interrupts for an event collector and neglects to
clear the status bit on resume, this change should fix the same bug as
fe31e69740 (PMEs not working after waking from a sleep state), but for
Root Complex Integrated Endpoints.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add pcie_bandwidth_capable() to compute the max link bandwidth supported by
a device, based on the max link speed and width, adjusted by the encoding
overhead.
The maximum bandwidth of the link is computed as:
max_link_width * max_link_speed * (1 - encoding_overhead)
2.5 and 5.0 GT/s links use 8b/10b encoding, which reduces the raw bandwidth
available by 20%; 8.0 GT/s and faster links use 128b/130b encoding, which
reduces it by about 1.5%.
The result is in Mb/s, i.e., megabits/second, of raw bandwidth.
Signed-off-by: Tal Gilboa <talgi@mellanox.com>
[bhelgaas: add 16 GT/s, adjust for pcie_get_speed_cap() and
pcie_get_width_cap() signatures, don't export outside drivers/pci]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Add pcie_get_width_cap() to find the max link width supported by a device.
Change max_link_width_show() to use pcie_get_width_cap().
Signed-off-by: Tal Gilboa <talgi@mellanox.com>
[bhelgaas: return width directly instead of error and *width, don't export
outside drivers/pci]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Add pcie_get_speed_cap() to find the max link speed supported by a device.
Change max_link_speed_show() to use pcie_get_speed_cap().
Signed-off-by: Tal Gilboa <talgi@mellanox.com>
[bhelgaas: return speed directly instead of error and *speed, don't export
outside drivers/pci]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJauCZfAAoJEHm+PkMAQRiGWGUH/2rhdQDkoJpYWnjaQkolECG8
MxpGE7nmIIHxQcbSDdHTGJ8IhVm6Z5wZ7ym/PwCDTT043Y1y341sJrIwL2/nTG6d
HVidk8hFvgN6QzlzVAHT3ZZMII/V9Zt+VV5SUYLGnPAVuJNHo/6uzWlTU5g+NTFo
IquFDdQUaGBlkKqby+NoAFnkV1UAIkW0g22cfvPnlO5GMer0gusGyVNvVp7TNj3C
sqj4Hvt3RMDLMNe9RZ2pFTiOD096n8FWpYftZneUTxFImhRV3Jg5MaaYZm9SI3HW
tXrv/LChT/F1mi5Pkx6tkT5Hr8WvcrwDMJ4It1kom10RqWAgjxIR3CMm448ileY=
=YKUG
-----END PGP SIGNATURE-----
Backmerge tag 'v4.16-rc7' into drm-next
Linux 4.16-rc7
This was requested by Daniel, and things were getting
a bit hard to reconcile, most of the conflicts were
trivial though.
Mike Lothian reported that plugging in a USB-C device does not work
properly in his Dell Alienware system. This system has an Intel Alpine
Ridge Thunderbolt controller providing USB-C functionality. In these
systems the USB controller (xHCI) is hotplugged whenever a device is
connected to the port using ACPI-based hotplug.
The ACPI description of the root port in question is as follows:
Device (RP01)
{
Name (_ADR, 0x001C0000)
Device (PXSX)
{
Name (_ADR, 0x02)
Method (_RMV, 0, NotSerialized)
{
// ...
}
}
Here _ADR 0x02 means device 0, function 2 on the bus under root port (RP01)
but that seems to be incorrect because device 0 is the upstream port of the
Alpine Ridge PCIe switch and it has no functions other than 0 (the bridge
itself). When we get ACPI Notify() to the root port resulting from
connecting a USB-C device, Linux tries to read PCI_VENDOR_ID from device 0,
function 2 which of course always returns 0xffffffff because there is no
such function and we never find the device.
In Windows this works fine.
Now, since we get ACPI Notify() to the root port and not to the PXSX device
we should actually start our scan from there as well and not from the
non-existent PXSX device. Fix this by checking presence of the slot itself
(function 0) if we fail to do that otherwise.
While there use pci_bus_read_dev_vendor_id() in get_slot_status(), which is
the recommended way to read Device and Vendor IDs of devices on PCI buses.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=198557
Reported-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Compiling the xilinx-nwl driver with sparse checks result in the
following warning:
drivers/pci/host/pcie-xilinx-nwl.c:633:38: sparse: cast truncates bits
from constant value (ffffffff00000000 becomes 0)
Fix it by explicitly writing 0 to mask interrupts instead of relying
on a bogus cast applied to the mask bitwise complement.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Michal Simek <michal.simek@xilinx.com>
This was generated from 0-day builder.
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
[robh: add commit msg]
Signed-off-by: Rob Herring <robh@kernel.org>
[lorenzo.pieralisi@arm.com: reworked the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
PCIe 4.0 defines the 16.0 GT/s link speed. Links can run at that speed
without any Linux changes, but previously their sysfs "max_link_speed" and
"current_link_speed" files contained "Unknown speed", not the expected
"16.0 GT/s".
Add decoding for the new 16 GT/s link speed.
Signed-off-by: Jay Fang <f.fangjian@huawei.com>
[bhelgaas: add PCI_EXP_LNKCAP2_SLS_16_0GB]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dongdong Liu <liudongdong3@huawei.com>
PCIE_DW_HOST depends on PCI_MSI_IRQ_DOMAIN and since kirin selects
PCIE_DW_HOST, it must also depend on PCI_MSI_IRQ_DOMAIN. This was found
by 0-day once building on all arches was enabled.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
The iproc driver is using ARM's struct pci_sys_data simply to store a
private data pointer. This is completely unnecessary, so store the
private data directly in bus->sysdata as is done on arm64.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Scott Branden <scott.branden@broadcom.com>
compiler.h is unnecessary and doesn't exist on some arches, so remove
it.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Pull libata fixes from Tejun Heo:
"I sat on them too long and it's quite a few this late, but nothing has
a wide blast area. The changes are...
- Fix corner cases in SG command handling.
- Recent introduction of default powersaving mode config option
exposed several devices with broken powersaving behaviors. A number
of patches to update the blacklist accordingly.
- Fix a kernel panic on SAS hotplug.
- Other misc and device specific updates"
* 'for-4.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
libata: Modify quirks for MX100 to limit NCQ_TRIM quirk to MU01 version
libata: Make Crucial BX100 500GB LPM quirk apply to all firmware versions
libata: Apply NOLPM quirk to Crucial M500 480 and 960GB SSDs
libata: Enable queued TRIM for Samsung SSD 860
PCI: Add function 1 DMA alias quirk for Highpoint RocketRAID 644L
ahci: Add PCI-id for the Highpoint Rocketraid 644L card
ata: do not schedule hot plug if it is a sas host
libata: disable LPM for Crucial BX100 SSD 500GB drive
libata: Apply NOLPM quirk to Crucial MX100 512GB SSDs
libata: update documentation for sysfs interfaces
ata: sata_rcar: Remove unused variable in sata_rcar_init_controller()
libata: transport: cleanup documentation of sysfs interface
sata_rcar: Reset SATA PHY when Salvator-X board resumes
libata: don't try to pass through NCQ commands to non-NCQ devices
libata: remove WARN() for DMA or PIO command without data
libata: fix length validation of ATAPI-relayed SCSI commands
ata: libahci: fix comment indentation
ahci: Add check for device presence (PCIe hot unplug) in ahci_stop_engine()
libata: Fix compile warning with ATA_DEBUG enabled
Per PCIe r4.0, sec 9.3.4.1.11, the BAR registers in VF config space are all
RO Zero, so skip sizing them.
This is an optimization when enabling SR-IOV on a device with many VFs.
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Remove pointless comments that tell us the file name, remove blank line
comments, follow multi-line comment conventions. No functional change
intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Indent things so they line up neatly and remove extra blank lines and
superfluous comments. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
With "initcall_debug", we report how long every PCI quirk took.
Even without "initcall_debug", report the runtime of any quirk that takes
longer than 10ms. This is to make it easier to notice quirks that slow
down boot.
This was motivated by a report from Paul Menzel that PCI final quirks took
half a second at boot.
Link: https://lkml.kernel.org/r/44cada166e42007d27b4c3e3aa0744d7@molgen.mpg.de
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
With "initcall_debug", we report how long every PCI quirk took. Previously
we used pr_debug(), which means you have to figure out how to enable debug
output.
Log these timings using pci_info() instead so it doesn't depend on DEBUG,
CONFIG_DYNAMIC_DEBUG, etc.
Also, don't log anything at all unless "initcall_debug" is specified. This
matches what we do in do_one_initcall_debug().
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The VPD-related structures are only used in vpd.c, so move them from
drivers/pci/pci.h to vpd.c. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Move the VPD-related quirks from quirks.c to vpd.c, which removes the need
for struct pci_vpd outside vpd.c. The goal is to encapsulate all the VPD
code and structures in vpd.c.
No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Move the VPD-related sysfs code from pci-sysfs.c to vpd.c. This follows
the pattern of pcie_aspm_create_sysfs_dev_files(). The goal is to
encapsulate all the VPD code and structures in vpd.c.
No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Move the VPD-related code from access.c to vpd.c. The goal is to
encapsulate all the VPD code and structures in vpd.c.
No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tegra186 powergate driver is implemented as power domain driver, power
partition ungate/gate are registered as power_on/power_off callback
functions. There are no direct functions to power gate/ungate host
controller in Tegra186. Host controller driver should add "power-domains"
property in device tree and implement runtime suspend and resume
callback functons. Power gate and ungate is taken care by power domain
driver when host controller driver calls pm_runtime_put_sync and
pm_runtime_get_sync respectively.
Register suspend_noirq & resume_noirq callback functions to allow PCIe to
come up after resume from RAM. Both runtime and noirq pm ops share same
callback functions.
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
[lorenzo.pieralisi@arm.com: squashed patch to fix compilation]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
If there is pending work in hv_pci_devices_present() we just need to add
the new dr entry into the dr_list. Add a check to detect pending work
items and update the code to skip queuing work if pending work items
are detected.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Jack Morgenstein <jackm@mellanox.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
When kernel is executing hv_eject_device_work(), hpdev->state value must
be hv_pcichild_ejecting; any other value would consist in a bug,
therefore replace the bogus check with an explicit WARN_ON() on the
condition failure detection.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Jack Morgenstein <jackm@mellanox.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Comment in _hv_pcifront_read_config() contains a typo, fix it.
No functional change.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
[lorenzo.pieralisi@arm.com: changed commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
1. With the patch "x86/vector/msi: Switch to global reservation mode",
the recent v4.15 and newer kernels always hang for 1-vCPU Hyper-V VM
with SR-IOV. This is because when we reach hv_compose_msi_msg() by
request_irq() -> request_threaded_irq() ->__setup_irq()->irq_startup()
-> __irq_startup() -> irq_domain_activate_irq() -> ... ->
msi_domain_activate() -> ... -> hv_compose_msi_msg(), local irq is
disabled in __setup_irq().
Note: when we reach hv_compose_msi_msg() by another code path:
pci_enable_msix_range() -> ... -> irq_domain_activate_irq() -> ... ->
hv_compose_msi_msg(), local irq is not disabled.
hv_compose_msi_msg() depends on an interrupt from the host.
With interrupts disabled, a UP VM always hangs in the busy loop in
the function, because the interrupt callback hv_pci_onchannelcallback()
can not be called.
We can do nothing but work it around by polling the channel. This
is ugly, but we don't have any other choice.
2. If the host is ejecting the VF device before we reach
hv_compose_msi_msg(), in a UP VM, we can hang in hv_compose_msi_msg()
forever, because at this time the host doesn't respond to the
CREATE_INTERRUPT request. This issue exists the first day the
pci-hyperv driver appears in the kernel.
Luckily, this can also by worked around by polling the channel
for the PCI_EJECT message and hpdev->state, and by checking the
PCI vendor ID.
Note: actually the above 2 issues also happen to a SMP VM, if
"hbus->hdev->channel->target_cpu == smp_processor_id()" is true.
Fixes: 4900be8360 ("x86/vector/msi: Switch to global reservation mode")
Tested-by: Adrian Suhov <v-adsuho@microsoft.com>
Tested-by: Chris Valean <v-chvale@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
Cc: <stable@vger.kernel.org>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Jack Morgenstein <jackm@mellanox.com>
When we hot-remove the device, we first receive a PCI_EJECT message and
then receive a PCI_BUS_RELATIONS message with bus_rel->device_count == 0.
The first message is offloaded to hv_eject_device_work(), and the second
is offloaded to pci_devices_present_work(). Both the paths can be running
list_del(&hpdev->list_entry), causing general protection fault, because
system_wq can run them concurrently.
The patch eliminates the race condition.
Since access to present/eject work items is serialized, we do not need the
hbus->enum_sem anymore, so remove it.
Fixes: 4daace0d8c ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs")
Link: https://lkml.kernel.org/r/KL1P15301MB00064DA6B4D221123B5241CFBFD70@KL1P15301MB0006.APCP153.PROD.OUTLOOK.COM
Tested-by: Adrian Suhov <v-adsuho@microsoft.com>
Tested-by: Chris Valean <v-chvale@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
[lorenzo.pieralisi@arm.com: squashed semaphore removal patch]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
Cc: <stable@vger.kernel.org> # v4.6+
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Jack Morgenstein <jackm@mellanox.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
The Tile architecture port was added by Chris Metcalf in 2010, and
maintained until early 2018 when he orphaned it due to his departure
from Mellanox, and nobody else stepped up to maintain it. The product
line is still around in the form of the BlueField SoC, but no longer
uses the Tile architecture.
There are also still products for sale with Tile-GX SoCs, notably the
Mikrotik CCR router family. The products all use old (linux-3.3) kernels
with lots of patches and won't be upgraded by their manufacturers. There
have been efforts to port both OpenWRT and Debian to these, but both
projects have stalled and are very unlikely to be continued in the future.
Given that we are reasonably sure that nobody is still using the port
with an upstream kernel any more, it seems better to remove it now while
the port is in a good shape than to let it bitrot for a few years first.
Cc: Chris Metcalf <chris.d.metcalf@gmail.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: http://www.mellanox.com/page/npu_multicore_overview
Link: https://jenkins.debian.net/view/rebootstrap/job/rebootstrap_tilegx_gcc7/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Building the tegra PCIe host driver without MSI results in a link
failure:
drivers/pci/host/pci-tegra.o:(.data+0x70): undefined reference to
`pci_msi_unmask_irq'
drivers/pci/host/pci-tegra.o:(.data+0x74): undefined reference to
`pci_msi_mask_irq'
This adds the same dependency that everyone else uses.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[lorenzo.pieralisi@arm.com: rewrote commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Back in 2013, runtime PM for GPUs with integrated HDA controller was
introduced with commits 0d69704ae3 ("gpu/vga_switcheroo: add driver
control power feature. (v3)") and 246efa4a07 ("snd/hda: add runtime
suspend/resume on optimus support (v4)").
Briefly, the idea was that the HDA controller is forced on and off in
unison with the GPU.
The original code is mostly still in place even though it was never a
100% perfect solution: E.g. on access to the HDA controller, the GPU
is powered up via vga_switcheroo_runtime_resume_hdmi_audio() but there
are no provisions to keep it resumed until access to the HDA controller
has ceased: The GPU autosuspends after 5 seconds, rendering the HDA
controller inaccessible.
Additionally, a kludge is required when hda_intel.c probes: It has to
check whether the GPU is powered down (check_hdmi_disabled()) and defer
probing if so.
However in the meantime (in v4.10) the driver core has gained a feature
called device links which promises to solve such issues in a clean way:
It allows us to declare a dependency from the HDA controller (consumer)
to the GPU (supplier). The PM core then automagically ensures that the
GPU is runtime resumed as long as the HDA controller's ->probe hook is
executed and whenever the HDA controller is accessed.
By default, the HDA controller has a dependency on its parent, a PCIe
Root Port. Adding a device link creates another dependency on its
sibling:
PCIe Root Port
^ ^
| |
| |
HDA ===> GPU
The device link is not only used for runtime PM, it also guarantees that
on system sleep, the HDA controller suspends before the GPU and resumes
after the GPU, and on system shutdown the HDA controller's ->shutdown
hook is executed before the one of the GPU. It is a complete solution.
Using this functionality is as simple as calling device_link_add(),
which results in a dmesg entry like this:
pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0
The code for the GPU-governed audio power management can thus be removed
(except where it's still needed for legacy manual power control).
The device link is added in a PCI quirk rather than in hda_intel.c.
It is therefore legal for the GPU to runtime suspend to D3cold even if
the HDA controller is not bound to a driver or if CONFIG_SND_HDA_INTEL
is not enabled, for accesses to the HDA controller will cause the GPU to
wake up regardless if they're occurring outside of hda_intel.c (think
config space readout via sysfs).
Contrary to the previous implementation, the HDA controller's power
state is now self-governed, rather than GPU-governed, whereas the GPU's
power state is no longer fully self-governed. (The HDA controller needs
to runtime suspend before the GPU can.)
It is thus crucial that runtime PM is always activated on the HDA
controller even if CONFIG_SND_HDA_POWER_SAVE_DEFAULT is set to 0 (which
is the default), lest the GPU stays awake. This is achieved by setting
the auto_runtime_pm flag on every codec and the AZX_DCAPS_PM_RUNTIME
flag on the HDA controller.
A side effect is that power consumption might be reduced if the GPU is
in use but the HDA controller is not, because the HDA controller is now
allowed to go to D3hot. Before, it was forced to stay in D0 as long as
the GPU was in use. (There is no reduction in power consumption on my
Nvidia GK107, but there might be on other chips.)
The code paths for legacy manual power control are adjusted such that
runtime PM is disabled during power off, thereby preventing the PM core
from resuming the HDA controller.
Note that the device link is not only added on vga_switcheroo capable
systems, but for *any* GPU with integrated HDA controller. The idea is
that the HDA controller streams audio via connectors located on the GPU,
so the GPU needs to be on for the HDA controller to do anything useful.
This commit implicitly fixes an unbalanced runtime PM ref upon unbind of
hda_intel.c: On ->probe, a runtime PM ref was previously released under
the condition "azx_has_pm_runtime(chip) || hda->use_vga_switcheroo", but
on ->remove a runtime PM ref was only acquired under the first of those
conditions. Thus, binding and unbinding the driver twice on a
vga_switcheroo capable system caused the runtime PM refcount to drop
below zero. The issue is resolved because the AZX_DCAPS_PM_RUNTIME flag
is now always set if use_vga_switcheroo is true.
For more information on device links please refer to:
https://www.kernel.org/doc/html/latest/driver-api/device_link.html
Documentation/driver-api/device_link.rst
Cc: Dave Airlie <airlied@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Peter Wu <peter@lekensteyn.nl>
Tested-by: Kai Heng Feng <kai.heng.feng@canonical.com> # AMD PowerXpress
Tested-by: Mike Lothian <mike@fireburn.co.uk> # AMD PowerXpress
Tested-by: Denis Lisov <dennis.lissov@gmail.com> # Nvidia Optimus
Tested-by: Peter Wu <peter@lekensteyn.nl> # Nvidia Optimus
Tested-by: Lukas Wunner <lukas@wunner.de> # MacBook Pro
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://patchwork.freedesktop.org/patch/msgid/51bd38360ff502a8c42b1ebf4405ee1d3f27118d.1520068884.git.lukas@wunner.de
There are PCI devices which are power-manageable by a nonstandard means,
such as a custom ACPI method. One example are discrete GPUs in hybrid
graphics laptops, another are Thunderbolt controllers in Macs.
Such devices can't be put into D3cold with pci_set_power_state() because
pci_platform_power_transition() fails with -ENODEV. Instead they're put
into D3hot by pci_set_power_state() and subsequently into D3cold by
invoking the nonstandard means. However as a consequence the cached
current_state is incorrectly left at D3hot.
What we need to do is walk the hierarchy below such a PCI device on
powerdown and update the current_state to D3cold. On powerup the PCI
device itself and the hierarchy below it is in D0uninitialized, so we
need to walk the hierarchy again and wake all devices, causing them to
be put into D0active and then letting them autosuspend as they see fit.
To this end make pci_wakeup_bus() & pci_bus_set_current_state() public
so PCI drivers don't have to reinvent the wheel.
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://patchwork.freedesktop.org/patch/msgid/2962443259e7faec577274b4ef8c54aad66f9a94.1520068884.git.lukas@wunner.de
We leave PCI devices not bound to a driver in D0 during runtime suspend.
But they may have a parent which is bound and can be transitioned to
D3cold at runtime. Once the parent goes to D3cold, the unbound child
may go to D3cold as well. When the child goes to D3cold, its internal
state, including configuration of BARs, MSI, ASPM, MPS, etc., is lost.
One example are recent hybrid graphics laptops which cut power to the
discrete GPU when the root port above it goes to ACPI power state D3.
Users may provoke this by unbinding the GPU driver and allowing runtime
PM on the GPU via sysfs: The PM core will then treat the GPU as
"suspended", which in turn allows the root port to runtime suspend,
causing the power resources listed in its _PR3 object to be powered off.
The GPU's BARs will be uninitialized when a driver later probes it.
Another example are hybrid graphics laptops where the GPU itself (rather
than the root port) is capable of runtime suspending to D3cold. If the
GPU's integrated HDA controller is not bound and the GPU's driver
decides to runtime suspend to D3cold, the HDA controller's BARs will be
uninitialized when a driver later probes it.
Fix by saving and restoring config space over a runtime suspend cycle
even if the device is not bound.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Peter Wu <peter@lekensteyn.nl> # Nvidia Optimus
Tested-by: Lukas Wunner <lukas@wunner.de> # MacBook Pro
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[lukas: add commit message, bikeshed code comments for clarity]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://patchwork.freedesktop.org/patch/msgid/92fb6e6ae2730915eb733c08e2f76c6a313e3860.1520068884.git.lukas@wunner.de
In pnv_php_unregister_one(), pnv_php_put_slot() might kfree
php_slot structure. But there is pci_hp_deregister() after
that with php_slot reference.
This patch moves pnv_php_put_slot() to the end of function.
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
fe31e69740 ("PCI/PCIe: Clear Root PME Status bits early during system
resume") added a .resume_noirq() callback to the PCIe port driver to clear
the PME Status bit during resume to work around a BIOS issue.
The BIOS evidently enabled PME interrupts for ACPI-based runtime wakeups
but did not clear the PME Status bit during resume, which meant PMEs after
resume did not trigger interrupts because PME Status did not transition
from cleared to set.
The fix was in the PCIe port driver, so it worked when CONFIG_PCIEPORTBUS
was set. But I think we *always* want the fix because the platform may use
PME interrupts even if Linux is built without the PCIe port driver.
Move the fix from the port driver to the PCI core so we can work around
this "PME doesn't work after waking from a sleep state" issue regardless of
CONFIG_PCIEPORTBUS.
[bhelgaas: folded in warning fix from Arnd Bergmann <arnd@arndb.de>:
https://lkml.kernel.org/r/20180328134747.2062348-1-arnd@arndb.de]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Move pcie_clear_root_pme_status() from the port driver to the PCI core so
it will be available even when the port driver isn't present. No
functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
pcieport_if.h contained the interfaces to register port service driver,
e.g., pcie_port_service_register(). portdrv.h contained internal data
structures of the port driver.
I don't think it's worth keeping those files separate, since both headers
and their users are all inside the PCI core.
Merge pcieport_if.h directly in drivers/pci/pcie/portdrv.h and update the
users to include that instead.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
On Armada 7K/8K we need to explicitly enable the register clock. This
clock is optional because not all the SoCs using this IP need it but at
least for Armada 7K/8K it is actually mandatory.
The binding documentation is updated accordingly.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
clk_disable_unprepare() already checks that the clock pointer is valid.
No need to test it before calling it.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Per PCIe r4.0, sec 7.5.1.1.9, multi-function devices are required to have a
function 0. Therefore, Linux scans for devices at function 0 (devfn
0/8/16/...) and only scans for other functions if function 0 has its
Multi-Function Device bit set or ARI or SR-IOV indicate there are more
functions.
The Jailhouse hypervisor may pass individual functions of a multi-function
device to a guest without passing function 0, which means a Linux guest
won't find them.
Change Linux PCI probing so it scans all function numbers when running as a
guest over Jailhouse.
This is technically prohibited by the spec, so it is possible that PCI
devices without the Multi-Function Device bit set may have unexpected
behavior in response to this probe.
Originally-by: Benedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: jailhouse-dev@googlegroups.com
Cc: Benedikt Spranger <b.spranger@linutronix.de>
Cc: linux-pci@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Link: https://lkml.kernel.org/r/06e279b2a3e06cf6689ab3975f8ab592bba02362.1520408357.git.jan.kiszka@siemens.com
The subordinate value indicates the highest bus number which can be
reached downstream though a certain device.
Commit a20c7f36bd ("PCI: Do not allocate more buses than available in
parent") ensures that downstream devices cannot assign busnumbers higher
than the upstream device subordinate number, which was indeed illogical.
By default, dw_pcie_setup_rc() inits the Root Complex subordinate to a
value of 0x01.
Due to this combined with above commit, enumeration stops digging deeper
downstream as soon as bus num 0x01 has been assigned, which is always the
case for a bridge device.
This results in all devices behind a bridge bus remaining undetected, as
these would be connected to bus 0x02 or higher.
Fix this by initializing the RC to a subordinate value of 0xff, which is
not altering hardware behaviour in any way, but informs probing function
pci_scan_bridge() later on which reads this value back from register.
The following nasty errors during boot are also fixed by this:
pci_bus 0000:02: busn_res: can not insert [bus 02-ff] under [bus 01] (conflicts with (null) [bus 01])
...
pci_bus 0000:03: [bus 03] partially hidden behind bridge 0000:01 [bus 01]
...
pci_bus 0000:04: [bus 04] partially hidden behind bridge 0000:01 [bus 01]
...
pci_bus 0000:05: [bus 05] partially hidden behind bridge 0000:01 [bus 01]
pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 05
pci_bus 0000:02: busn_res: can not insert [bus 02-05] under [bus 01] (conflicts with (null) [bus 01])
pci_bus 0000:02: [bus 02-05] partially hidden behind bridge 0000:01 [bus 01]
Fixes: a20c7f36bd ("PCI: Do not allocate more buses than available in
parent")
Tested-by: Niklas Cassel <niklas.cassel@axis.com>
Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Cc: stable@vger.kernel.org # v4.15+
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Jianguo Sun <sunjianguo1@huawei.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Minghuan Lian <minghuan.Lian@freescale.com>
Cc: Mingkai Hu <mingkai.hu@freescale.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Pratyush Anand <pratyush.anand@gmail.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: Roy Zang <tie-fei.zang@freescale.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Xiaowei Song <songxiaowei@hisilicon.com>
Cc: Zhou Wang <wangzhou1@hisilicon.com>
The power supplies to PCIe port are often controlled by GPIO on some board
designs. Let's add an optional regulator which can be backed by GPIO to
control the power.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
If clk_prepare_enable() call fails on a particular clock, we should not
call clk_disable_unprepare() on this clock, but on the clocks that
succeed from clk_prepare_enable() previously.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
This patch converts existing regulators to use regulator bulk apis,
to make it consistent with msm8996 changes also cut down some redundant code.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
This patch adds supplies that are required for msm8996. vdda
is analog supply that go in to controller, and vddpe_3v3 is
supply to PCIe endpoint.
Without these supplies PCIe endpoints which require power supplies are
not enumerated at all, as there is no one to power it up.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Reviewed-by: Rob Herring <robh@kernel.org>
The Synopsys PCIe Root Complex supports up to MSI 256 IRQs distributed
over 8 controller registers, therefore the maximum number of MSI IRQs
can be changed to 256. The number of controllers can be calculated based
on the number of vectors used by the specific SoC driver.
Update the dwc host bridge driver maximum number of supported MSI
IRQs.
Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Niklas Cassel <niklas.cassel@axis.com>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Remove the unused old MSI IRQs API from pcie-designware based on
struct msi_controller that should now be considered obsolete.
Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Niklas Cassel <niklas.cassel@axis.com>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Implement a multiplexed IRQ domain hierarchy API in the pcie-designware
host bridge driver that funnels all MSI IRQs into a single parent
interrupt, moving away from the obsolete struct msi_controller based
API.
Although the old implementation API is still available, pcie-designware
will now use the multiplexed IRQ domains hierarchical API.
Remove all existing dwc based host bridges MSI IRQs handlers, in that the
hierarchical API now handles MSI IRQs through the hierarchical/chained
MSI domain implementation.
Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Niklas Cassel <niklas.cassel@axis.com>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Per PCIe r4.0, sec 9.2.1.4, VFs can not implement INTX, and their Interrupt
Line and Interrupt Pin registers must be RO Zero. Some devices have
thousands of VFs, so skip reading the registers as an optimization.
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de>
[bhelgaas: changelog, comment]
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Setting Secondary Bus Reset of a downstream port sends a hot reset. PCIe
r4.0, sec 2.3.1, Request Handling Rules, indicates that a device can return
CRS Completion Status following such a reset. Wait until the device
becomes ready in that situation.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Add a return value to pci_reset_bridge_secondary_bus() so we can return an
error if the device doesn't become ready after the reset.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
PCIe r4.0, sec 2.3.1, Request Handling Rules, indicates that a device can
return CRS Completion Status following a D3hot to D0 transition. Wait
until the device becomes ready in that situation.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The Highpoint RocketRAID 644L uses a Marvel 88SE9235 controller, as with
other Marvel controllers this needs a function 1 DMA alias quirk.
Note the RocketRAID 642L uses the same Marvel 88SE9235 controller and
already is listed with a function 1 DMA alias quirk.
Cc: stable@vger.kernel.org
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1534106
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
-----BEGIN PGP SIGNATURE-----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=0inR
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.16-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Update pci.ids location (documentation only) (Randy Dunlap)
- Fix a crash when BIOS didn't assign a BAR and we try to enlarge it
(Christian König)
* tag 'pci-v4.16-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Allow release of resources that were never assigned
PCI: Update location of pci.ids file
Implement remove callback function for Tegra PCIe driver to add
loadable kernel module support.
Per PCIe r3.0, sec 5.3.3.2.1, PCIe root port should broadcast PME_Turn_Off
message before PCIe link goes to L2. PME_Turn_Off broadcast mechanism is
implemented in AFI module. Each Tegra PCIe root port has its own
PME_Turn_Off and PME_TO_Ack bitmap in AFI_PME register, program this
register to broadcast PME_Turn_Off message.
Once PME_TO_Ack is recieved driver will turn OFF PCIe clock, power gate
PCIe partition and turn OFF regulators.
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
tegra_pcie_probe() can fail in multiple instances, this patch takes care
of freeing the resources which are allocated before probe fail.
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
If the "parent" pointer passed to of_pci_bus_find_domain_nr() is NULL,
don't dereference it.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Remove the pci_epf_create() goto labels completely and handle the
errors at the respective call site to simplify the function error
handling.
Signed-off-by: Rolf Evers-Fischer <rolf.evers.fischer@aptiv.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
'put_device()' calls the relase function 'pci_epf_dev_release()',
which already frees 'epf->name' and 'epf'.
Therefore we must not free them again after 'put_device()'.
Fixes: 5e8cb40338 ("PCI: endpoint: Add EP core layer to enable EP controller and EP functions")
Signed-off-by: Rolf Evers-Fischer <rolf.evers.fischer@aptiv.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
This commit replaces allocating and freeing the intermediate
'buf'/'func_name' with a combination of 'kstrndup()' and 'len'.
'len' is the required length of 'epf->name'.
'epf->name' should be either the first part of 'name' preceding the '.'
or the complete 'name', if there is no '.' in the name.
Signed-off-by: Rolf Evers-Fischer <rolf.evers.fischer@aptiv.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Previously we emitted a warning if we tried to configure common clock mode
the link was already configured to common clock mode by the UEFI BIOS.
Bail out silently in that case instead of emitting the warning:
pci 0004:00:00.0: ASPM: Could not configure common clock
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
aspm_calc_l1ss_info() computes l1_2_threshold in microseconds as:
l1_2_threshold = 2 + 4 + t_common_mode + t_power_on;
where t_common_mode is at most 255us:
PCI_L1SS_CAP_CM_RESTORE_TIME 0x0000ff00 <-- 8 bits; <256us
and t_power_on is at most 31 * 100us = 3100us:
PCI_L1SS_CAP_P_PWR_ON_VALUE 0x00f80000 <-- 5 bits; <32
PCI_L1SS_CAP_P_PWR_ON_SCALE 0x00030000 <-- *2us, *10us, or *100us
So l1_2_threshold is at most 2 + 4 + 255 + 3100 = 3361, which means
threshold_ns is at most 3361 * 1000 = 3361000, which easily fits in a
u32.
Declare threshold_ns as u32, not u64. This fixes a Coverity warning.
Addresses-Coverity-ID: 1462501
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Bool variables should be initialized only through true and false
values; update tlp_read_packet() code to comply.
Detected using the Coccinelle tool.
Fixes: eaa6111b70 ("PCI: altera: Add Altera PCIe host controller driver")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
PCIe r4.0, sec 2.3.1, Request Handling Rules, says:
Valid reset conditions after which a device is permitted to return CRS
are:
* Cold, Warm, and Hot Resets,
* FLR
* A reset initiated in response to a D3hot to D0 uninitialized
Try to reuse FLR implementation towards other reset types.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
pci_flr_wait() and pci_af_flr() functions assume graceful return even
though the device is inaccessible under error conditions.
Return -ENOTTY in error cases so that __pci_reset_function_locked() can
try other reset types if AF_FLR/FLR reset fails.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Commit b014e96d1a ("PCI: Protect pci_error_handlers->reset_notify() usage
with device_lock()") added protection around pci_dev_restore() function so
a device-specific remove callback does not cause a race condition with
hotplug.
pci_dev_lock() usage has been forgotten in two places. Add locks for
pci_slot_restore() and moving pci_dev_restore() inside the locks for
pci_try_reset_function().
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Add Marvell 88SE9220 DMA quirk as found and tested on bug 42679.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=42679
Signed-off-by: Thomas Vincent-Cross <me@tvc.id.au>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
It is entirely possible that the BIOS wasn't able to assign resources to a
device. In this case don't crash in pci_release_resource() when we try to
resize the resource.
Fixes: 8bb705e3e7 ("PCI: Add pci_resize_resource() for resizing BARs")
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
CC: stable@vger.kernel.org # v4.15+
Bit pattern RCAR_PCI_INT_SIGRETABORT is being bit-wise or'd twice;
remove the redundant 2nd RCAR_PCI_INT_SIGRETABORT.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
'default N' should be 'default n', though they happen to have the same
effect here, due to undefined symbols (N in this case) evaluating to n
in a tristate sense.
Remove the default instead of changing it. bool and tristate symbols
implicitly default to n.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
...instead of open coding its functionality.
No changes in functionality.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-acpi@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Link: http://lkml.kernel.org/r/20180222125923.57385-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The Ampere Computing PCIe root port does not support ACS at this point.
However, the hardware provides isolation and source validation through the
SMMU. The stream ID generated by the PCIe ports contain both the
bus/device/function number as well as the port ID in its 3 most significant
bits. Turn on ACS but disable all the peer-to-peer features.
APM is being rebranded to Ampere. The Vendor and Device IDs change, but
the functionality stays the same.
Signed-off-by: Feng Kan <fkan@apm.com>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Move pcieport_if.h from include/linux to drivers/pci/pcie/pcieport_if.h
because the interfaces there are only used by the PCI core.
Replace all uses of #include<linux/pcieport_if.h> with relative paths to
the new file location, e.g., #include "../pcieport_if.h"
Signed-off-by: Frederick Lawler <fred@fredlawl.com>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
There's no reason pci_uevent_ers() needs to be inline in pci.h, so move it
out to a C file.
Given it's used by AER the obvious location would be somewhere in
drivers/pci/pcie/aer, but because it's also used by powerpc EEH code
unfortunately that doesn't work in the case where EEH is enabled but
PCIEPORTBUS is not.
So for now put it in pci-driver.c, next to pci_uevent(), with an
appropriate #ifdef so it's not built if AER and EEH are both disabled.
While we're moving it also fix up the kernel doc comment for @pdev to be
accurate.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Reviewed-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
We probe every device for whether it supports reset so we can tell whether
to create a sysfs "reset" file for it. We do that probe in
pci_init_capabilities() during enumeration and save the result in
dev->reset_fn. The result doesn't depend on any other devices on the bus
and shouldn't change after boot, so we don't need to do the probe again.
Remove the pci_probe_reset_function() calls and rely on the dev->reset_fn
we found during enumeration. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We've run into a problem where our device is attached
to a Virtual Machine and the use of the new pci_set_vpd_size()
API doesn't help. The VM kernel has been informed that
the accesses are okay, but all of the actual VPD Capability
Accesses are trapped down into the KVM Hypervisor where it
goes ahead and imposes the silent denials.
The right idea is to follow the kernel.org
commit 1c7de2b4ff ("PCI: Enable access to non-standard VPD for
Chelsio devices (cxgb3)") which Alexey Kardashevskiy authored
to establish a PCI Quirk for our T3-based adapters. This commit
extends that PCI Quirk to cover Chelsio T4 devices and later.
The advantage of this approach is that the VPD Size gets set early
in the Base OS/Hypervisor Boot and doesn't require that the cxgb4
driver even be available in the Base OS/Hypervisor. Thus PF4 can
be exported to a Virtual Machine and everything should work.
Fixes: 67e658794c ("cxgb4: Set VPD size so we can read both VPD structures")
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously we called pci_probe_reset_function() in this path:
pci_sysfs_init # late_initcall
for_each_pci_dev(dev)
pci_create_sysfs_dev_files(dev)
pci_create_capabilities_sysfs(dev)
pci_probe_reset_function
pci_dev_specific_reset
pcie_has_flr
pcie_capability_read_dword
pci_sysfs_init() is a late_initcall, and a driver may have already claimed
one of these devices and enabled runtime power management for it, so the
device could already be in D3 by the time we get to pci_sysfs_init().
The device itself should respond to the config read even while it's in
D3hot, but if an upstream bridge is also in D3hot, the read won't even
reach the device because the bridge won't forward it downstream to the
device. If the bridge is a PCIe port, it should complete the read as an
Unsupported Request, which may be reported to the CPU as an exception or as
invalid data.
Avoid this case by probing for reset support from pci_init_capabilities(),
before a driver can claim the device. The device may be in D3hot, but any
bridges leading to it should be in D0, so the device's config space should
be fully accessible at that point.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If devm_ioremap_resource() detects an error condition in the return
value through IS_ERR(), the return value should be retrieved through
PTR_ERR() instead of hardcoding it.
Fix the xgene_msi_probe() error return code.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
[lorenzo.pieralisi@arm.com: rewrote commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:
for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
done
with de-mangling cleanups yet to come.
NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do. But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.
The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Update the ACPICA kernel code to upstream revision 20180105 including:
* Assorted fixes (Jung-uk Kim).
* Support for X32 ABI compilation (Anuj Mittal).
* Update of ACPICA copyrights to 2018 (Bob Moore).
- Prepare for future modifications to avoid executing the _STA control
method too early (Hans de Goede).
- Make the processor performance control library code ignore _PPC
notifications if they cannot be handled and fix up the C1 idle
state definition when it is used as a fallback state (Chen Yu,
Yazen Ghannam).
- Make it possible to use the SPCR table on x86 and to replace the
original IORT table with a new one from initrd (Prarit Bhargava,
Shunyong Yang).
- Add battery-related quirks for Asus UX360UA and UX410UAK and add
quirks for table parsing on Dell XPS 9570 and Precision M5530
(Kai Heng Feng).
- Address static checker warnings in the CPPC code (Gustavo Silva).
- Avoid printing a raw pointer to the kernel log in the smart
battery driver (Greg Kroah-Hartman).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=rVdp
-----END PGP SIGNATURE-----
Merge tag 'acpi-part2-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These are mostly fixes and cleanups, a few new quirks, a couple of
updates related to the handling of ACPI tables and ACPICA copyrights
refreshment.
Specifics:
- Update the ACPICA kernel code to upstream revision 20180105
including:
* Assorted fixes (Jung-uk Kim)
* Support for X32 ABI compilation (Anuj Mittal)
* Update of ACPICA copyrights to 2018 (Bob Moore)
- Prepare for future modifications to avoid executing the _STA
control method too early (Hans de Goede)
- Make the processor performance control library code ignore _PPC
notifications if they cannot be handled and fix up the C1 idle
state definition when it is used as a fallback state (Chen Yu,
Yazen Ghannam)
- Make it possible to use the SPCR table on x86 and to replace the
original IORT table with a new one from initrd (Prarit Bhargava,
Shunyong Yang)
- Add battery-related quirks for Asus UX360UA and UX410UAK and add
quirks for table parsing on Dell XPS 9570 and Precision M5530 (Kai
Heng Feng)
- Address static checker warnings in the CPPC code (Gustavo Silva)
- Avoid printing a raw pointer to the kernel log in the smart battery
driver (Greg Kroah-Hartman)"
* tag 'acpi-part2-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: sbshc: remove raw pointer from printk() message
ACPI: SPCR: Make SPCR available to x86
ACPI / CPPC: Use 64-bit arithmetic instead of 32-bit
ACPI / tables: Add IORT to injectable table list
ACPI / bus: Parse tables as term_list for Dell XPS 9570 and Precision M5530
ACPICA: Update version to 20180105
ACPICA: All acpica: Update copyrights to 2018
ACPI / processor: Set default C1 idle state description
ACPI / battery: Add quirk for Asus UX360UA and UX410UAK
ACPI: processor_perflib: Do not send _PPC change notification if not ready
ACPI / scan: Use acpi_bus_get_status() to initialize ACPI_TYPE_DEVICE devs
ACPI / bus: Do not call _STA on battery devices with unmet dependencies
PCI: acpiphp_ibm: prepare for acpi_get_object_info() no longer returning status
ACPI: export acpi_bus_get_status_handle()
ACPICA: Add a missing pair of parentheses
ACPICA: Prefer ACPI_TO_POINTER() over ACPI_ADD_PTR()
ACPICA: Avoid NULL pointer arithmetic
ACPICA: Linux: add support for X32 ABI compilation
ACPI / video: Use true for boolean value
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ttq9
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
- skip AER driver error recovery callbacks for correctable errors
reported via ACPI APEI, as we already do for errors reported via the
native path (Tyler Baicar)
- fix DPC shared interrupt handling (Alex Williamson)
- print full DPC interrupt number (Keith Busch)
- enable DPC only if AER is available (Keith Busch)
- simplify DPC code (Bjorn Helgaas)
- calculate ASPM L1 substate parameter instead of hardcoding it (Bjorn
Helgaas)
- enable Latency Tolerance Reporting for ASPM L1 substates (Bjorn
Helgaas)
- move ASPM internal interfaces out of public header (Bjorn Helgaas)
- allow hot-removal of VGA devices (Mika Westerberg)
- speed up unplug and shutdown by assuming Thunderbolt controllers
don't support Command Completed events (Lukas Wunner)
- add AtomicOps support for GPU and Infiniband drivers (Felix Kuehling,
Jay Cornwall)
- expose "ari_enabled" in sysfs to help NIC naming (Stuart Hayes)
- clean up PCI DMA interface usage (Christoph Hellwig)
- remove PCI pool API (replaced with DMA pool) (Romain Perier)
- deprecate pci_get_bus_and_slot(), which assumed PCI domain 0 (Sinan
Kaya)
- move DT PCI code from drivers/of/ to drivers/pci/ (Rob Herring)
- add PCI-specific wrappers for dev_info(), etc (Frederick Lawler)
- remove warnings on sysfs mmap failure (Bjorn Helgaas)
- quiet ROM validation messages (Alex Deucher)
- remove redundant memory alloc failure messages (Markus Elfring)
- fill in types for compile-time VGA and other I/O port resources
(Bjorn Helgaas)
- make "pci=pcie_scan_all" work for Root Ports as well as Downstream
Ports to help AmigaOne X1000 (Bjorn Helgaas)
- add SPDX tags to all PCI files (Bjorn Helgaas)
- quirk Marvell 9128 DMA aliases (Alex Williamson)
- quirk broken INTx disable on Ceton InfiniTV4 (Bjorn Helgaas)
- fix CONFIG_PCI=n build by adding dummy pci_irqd_intx_xlate() (Niklas
Cassel)
- use DMA API to get MSI address for DesignWare IP (Niklas Cassel)
- fix endpoint-mode DMA mask configuration (Kishon Vijay Abraham I)
- fix ARTPEC-6 incorrect IS_ERR() usage (Wei Yongjun)
- add support for ARTPEC-7 SoC (Niklas Cassel)
- add endpoint-mode support for ARTPEC (Niklas Cassel)
- add Cadence PCIe host and endpoint controller driver (Cyrille
Pitchen)
- handle multiple INTx status bits being set in dra7xx (Vignesh R)
- translate dra7xx hwirq range to fix INTD handling (Vignesh R)
- remove deprecated Exynos PHY initialization code (Jaehoon Chung)
- fix MSI erratum workaround for HiSilicon Hip06/Hip07 (Dongdong Liu)
- fix NULL pointer dereference in iProc BCMA driver (Ray Jui)
- fix Keystone interrupt-controller-node lookup (Johan Hovold)
- constify qcom driver structures (Julia Lawall)
- rework Tegra config space mapping to increase space available for
endpoints (Vidya Sagar)
- simplify Tegra driver by using bus->sysdata (Manikanta Maddireddy)
- remove PCI_REASSIGN_ALL_BUS usage on Tegra (Manikanta Maddireddy)
- add support for Global Fabric Manager Server (GFMS) event to
Microsemi Switchtec switch driver (Logan Gunthorpe)
- add IDs for Switchtec PSX 24xG3 and PSX 48xG3 (Kelvin Cao)
* tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits)
PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller
dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe endpoint controller
PCI: endpoint: Fix EPF device name to support multi-function devices
PCI: endpoint: Add the function number as argument to EPC ops
PCI: cadence: Add host driver for Cadence PCIe controller
dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller
PCI: Add vendor ID for Cadence
PCI: Add generic function to probe PCI host controllers
PCI: generic: fix missing call of pci_free_resource_list()
PCI: OF: Add generic function to parse and allocate PCI resources
PCI: Regroup all PCI related entries into drivers/pci/Makefile
PCI/DPC: Reformat DPC register definitions
PCI/DPC: Add and use DPC Status register field definitions
PCI/DPC: Squash dpc_rp_pio_get_info() into dpc_process_rp_pio_error()
PCI/DPC: Remove unnecessary RP PIO register structs
PCI/DPC: Push dpc->rp_pio_status assignment into dpc_rp_pio_get_info()
PCI/DPC: Squash dpc_rp_pio_print_error() into dpc_rp_pio_get_info()
PCI/DPC: Make RP PIO log size check more generic
PCI/DPC: Rename local "status" to "dpc_status"
PCI/DPC: Squash dpc_rp_pio_print_tlp_header() into dpc_rp_pio_print_error()
...
acpi_get_object_info() is intended for early probe usage and as such should
not call any methods which may rely on OpRegions, but it used to also call
_STA to get the status, which on some systems does rely on OpRegions, this
behavior and the acpi_device_info.current_status member are being removed.
This commit prepares the acpiphp_ibm code for this by having it get the
status itself using acpi_bus_get_status_handle(). Note no error handling is
necessary on any errors acpi_bus_get_status_handle() leaves the value of
the passed in current_status at its 0 initialization value.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Highlights:
- Enable support for memory protection keys aka "pkeys" on Power7/8/9 when
using the hash table MMU.
- Extend our interrupt soft masking to support masking PMU interrupts as well
as "normal" interrupts, and then use that to implement local_t for a ~4x
speedup vs the current atomics-based implementation.
- A new driver "ocxl" for "Open Coherent Accelerator Processor Interface
(OpenCAPI)" devices.
- Support for new device tree properties on PowerVM to describe hotpluggable
memory and devices.
- Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 64-bit VDSO.
- Freescale updates from Scott:
"Contains fixes for CPM GPIO and an FSL PCI erratum workaround, plus a
minor cleanup patch."
As well as quite a lot of other changes all over the place, and small fixes and
cleanups as always.
Thanks to:
Alan Modra, Alastair D'Silva, Alexey Kardashevskiy, Alistair Popple, Andreas
Schwab, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anshuman
Khandual, Anton Blanchard, Arnd Bergmann, Balbir Singh, Benjamin
Herrenschmidt, Bhaktipriya Shridhar, Bryant G. Ly, Cédric Le Goater,
Christophe Leroy, Christophe Lombard, Cyril Bur, David Gibson, Desnes A. Nunes
do Rosario, Dmitry Torokhov, Frederic Barrat, Geert Uytterhoeven, Guilherme G.
Piccoli, Gustavo A. R. Silva, Gustavo Romero, Ivan Mikhaylov, Joakim
Tjernlund, Joe Perches, Josh Poimboeuf, Juan J. Alvarez, Julia Cartwright,
Kamalesh Babulal, Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu Malaterre,
Michael Bringmann, Michael Hanselmann, Michael Neuling, Nathan Fontenot,
Naveen N. Rao, Nicholas Piggin, Paul Mackerras, Philippe Bergheaud, Ram Pai,
Russell Currey, Santosh Sivaraj, Scott Wood, Seth Forshee, Simon Guo, Stewart
Smith, Sukadev Bhattiprolu, Thiago Jung Bauermann, Vaibhav Jain, Vasyl
Gomonovych.
-----BEGIN PGP SIGNATURE-----
iQIwBAABCAAaBQJadF6wExxtcGVAZWxsZXJtYW4uaWQuYXUACgkQUevqPMjhpYA2
nBAAnguCEyAIYpc+ffE3WU9xJEWxa6bKuVufHcUFVntGiGD+igmMS+SHp4ay3Aos
HcA4WFrpzNb2KZ++kmFWtAKWnMfCiW9xuYJNicjr7X5ZiVBEhLWN/mQCwBKs3p6L
5+HhvytcdkKVbEcyVjEGvRL40AyxXNOI02o6Co9X8vanHsmWB4q0eWe4PHstZqlg
6K6kazMp+NTvEFYwKNXDOvuHouKSL57l14SLROH7CpJkNTOQ9s+W59/LmnuCjRlu
o70b7iWOAEbF9tvMma1ksDZVNj7mSyaymLYCyOXu4CkuuleJacZYJ9oQGNddoIbC
wk7l93vPT/yze7DYg8x3uXpKcaDEvEepPuQ/ubz+UXFQWuJtl5ej6Cv+0eOmyZIs
+bjWhGHKdNttnsiPlTRCX/gWD13RE1dB6xXJlfOJ7Oz9OnXXK8ZKc1NTREbQXRWM
8tClAwf9upWpm86GHPVnyrgYbgZo5b1os4SoS8e3kESzakrQVQP7J376u2DtccRq
2AGqjJ+tl5tYPnhm8zG1cNrpqHHpgkNGqLS7DvWRg3EPmEKVQcltN1b/0aKaAjHA
aTRofjrVo+jJ4MX1uyEo59yNCEQPfjkmHRQdLwm+xjWTzEPfIMzpWyXm14tawDQf
OjcAe90W/qQ18brw4z+2BI14J76XziOSX/QcunOn1u/sqaM=
=3rYn
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Highlights:
- Enable support for memory protection keys aka "pkeys" on Power7/8/9
when using the hash table MMU.
- Extend our interrupt soft masking to support masking PMU interrupts
as well as "normal" interrupts, and then use that to implement
local_t for a ~4x speedup vs the current atomics-based
implementation.
- A new driver "ocxl" for "Open Coherent Accelerator Processor
Interface (OpenCAPI)" devices.
- Support for new device tree properties on PowerVM to describe
hotpluggable memory and devices.
- Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 64-bit
VDSO.
- Freescale updates from Scott: fixes for CPM GPIO and an FSL PCI
erratum workaround, plus a minor cleanup patch.
As well as quite a lot of other changes all over the place, and small
fixes and cleanups as always.
Thanks to: Alan Modra, Alastair D'Silva, Alexey Kardashevskiy,
Alistair Popple, Andreas Schwab, Andrew Donnellan, Aneesh Kumar K.V,
Anju T Sudhakar, Anshuman Khandual, Anton Blanchard, Arnd Bergmann,
Balbir Singh, Benjamin Herrenschmidt, Bhaktipriya Shridhar, Bryant G.
Ly, Cédric Le Goater, Christophe Leroy, Christophe Lombard, Cyril Bur,
David Gibson, Desnes A. Nunes do Rosario, Dmitry Torokhov, Frederic
Barrat, Geert Uytterhoeven, Guilherme G. Piccoli, Gustavo A. R. Silva,
Gustavo Romero, Ivan Mikhaylov, Joakim Tjernlund, Joe Perches, Josh
Poimboeuf, Juan J. Alvarez, Julia Cartwright, Kamalesh Babulal,
Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu Malaterre, Michael
Bringmann, Michael Hanselmann, Michael Neuling, Nathan Fontenot,
Naveen N. Rao, Nicholas Piggin, Paul Mackerras, Philippe Bergheaud,
Ram Pai, Russell Currey, Santosh Sivaraj, Scott Wood, Seth Forshee,
Simon Guo, Stewart Smith, Sukadev Bhattiprolu, Thiago Jung Bauermann,
Vaibhav Jain, Vasyl Gomonovych"
* tag 'powerpc-4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (199 commits)
powerpc/mm/radix: Fix build error when RADIX_MMU=n
macintosh/ams-input: Use true and false for boolean values
macintosh: change some data types from int to bool
powerpc/watchdog: Print the NIP in soft_nmi_interrupt()
powerpc/watchdog: regs can't be null in soft_nmi_interrupt()
powerpc/watchdog: Tweak watchdog printks
powerpc/cell: Remove axonram driver
rtc-opal: Fix handling of firmware error codes, prevent busy loops
powerpc/mpc52xx_gpt: make use of raw_spinlock variants
macintosh/adb: Properly mark continued kernel messages
powerpc/pseries: Fix cpu hotplug crash with memoryless nodes
powerpc/numa: Ensure nodes initialized for hotplug
powerpc/numa: Use ibm,max-associativity-domains to discover possible nodes
powerpc/kernel: Block interrupts when updating TIDR
powerpc/powernv/idoa: Remove unnecessary pcidev from pci_dn
powerpc/mm/nohash: do not flush the entire mm when range is a single page
powerpc/pseries: Add Initialization of VF Bars
powerpc/pseries/pci: Associate PEs to VFs in configure SR-IOV
powerpc/eeh: Add EEH notify resume sysfs
powerpc/eeh: Add EEH operations to notify resume
...
* pci/spdx:
PCI: Add SPDX GPL-2.0+ to replace implicit GPL v2 or later statement
PCI: Add SPDX GPL-2.0+ to replace GPL v2 or later boilerplate
PCI: Add SPDX GPL-2.0 to replace COPYING boilerplate
PCI: Add SPDX GPL-2.0 to replace GPL v2 boilerplate
PCI: Add SPDX GPL-2.0 when no license was specified
* lorenzo/pci/tegra:
PCI: tegra: Use bus->sysdata to store and get host private data
of: Export of_pci_range_to_resource()
PCI: tegra: Refactor configuration space mapping code
* lorenzo/pci/dwc:
PCI: exynos: Fix a potential init_clk_resources NULL pointer dereference
PCI: iproc: Fix NULL pointer dereference for BCMA
PCI: dra7xx: Iterate over INTx status bits
PCI: dra7xx: Fix legacy INTD IRQ handling
PCI: qcom: Account for const type of of_device_id.data
PCI: dwc: artpec6: Fix return value check in artpec6_add_pcie_ep()
PCI: exynos: Remove deprecated PHY initialization code
PCI: dwc: artpec6: Add support for the ARTPEC-7 SoC
bindings: PCI: artpec: Add support for the ARTPEC-7 SoC
PCI: dwc: artpec6: Deassert the core before waiting for PHY
PCI: dwc: Make cpu_addr_fixup take struct dw_pcie as argument
PCI: dwc: artpec6: Add support for endpoint mode
bindings: PCI: artpec: Add support for endpoint mode
PCI: dwc: artpec6: Split artpec6_pcie_establish_link() into smaller functions
PCI: dwc: artpec6: Use BIT and GENMASK macros
PCI: dwc: artpec6: Remove unused defines
PCI: dwc: dra7xx: Help compiler to remove unused code
PCI: dwc: dra7xx: Assign pp->ops in dra7xx_add_pcie_port() rather than in probe
PCI: dwc: dra7xx: Refactor Kconfig and Makefile handling for host/ep mode
PCI: designware-ep: Add generic function for raising MSI irq
PCI: designware-ep: Remove static keyword from dw_pcie_ep_reset_bar()
PCI: designware-ep: Pre-allocate memory for MSI in dw_pcie_ep_init
PCI: designware-ep: Read-only registers need DBI_RO_WR_EN to be writable
PCI: designware-ep: dw_pcie_ep_set_msi() should only set MMC bits
PCI: dwc: Use the DMA-API to get the MSI address
pci: dwc: pci-dra7xx: Make shutdown handler static
Includes resolution to conflict between:
4494738de0 ("PCI: endpoint: Add the function number as argument to EPC ops")
6f6d787371 ("PCI: designware-ep: Add generic function for raising MSI irq")
The resolution is due to Niklas Cassel <niklas.cassel@axis.com>:
https://lkml.kernel.org/r/20180201085608.GA22568@axis.com
Pull networking updates from David Miller:
1) Significantly shrink the core networking routing structures. Result
of http://vger.kernel.org/~davem/seoul2017_netdev_keynote.pdf
2) Add netdevsim driver for testing various offloads, from Jakub
Kicinski.
3) Support cross-chip FDB operations in DSA, from Vivien Didelot.
4) Add a 2nd listener hash table for TCP, similar to what was done for
UDP. From Martin KaFai Lau.
5) Add eBPF based queue selection to tun, from Jason Wang.
6) Lockless qdisc support, from John Fastabend.
7) SCTP stream interleave support, from Xin Long.
8) Smoother TCP receive autotuning, from Eric Dumazet.
9) Lots of erspan tunneling enhancements, from William Tu.
10) Add true function call support to BPF, from Alexei Starovoitov.
11) Add explicit support for GRO HW offloading, from Michael Chan.
12) Support extack generation in more netlink subsystems. From Alexander
Aring, Quentin Monnet, and Jakub Kicinski.
13) Add 1000BaseX, flow control, and EEE support to mvneta driver. From
Russell King.
14) Add flow table abstraction to netfilter, from Pablo Neira Ayuso.
15) Many improvements and simplifications to the NFP driver bpf JIT,
from Jakub Kicinski.
16) Support for ipv6 non-equal cost multipath routing, from Ido
Schimmel.
17) Add resource abstration to devlink, from Arkadi Sharshevsky.
18) Packet scheduler classifier shared filter block support, from Jiri
Pirko.
19) Avoid locking in act_csum, from Davide Caratti.
20) devinet_ioctl() simplifications from Al viro.
21) More TCP bpf improvements from Lawrence Brakmo.
22) Add support for onlink ipv6 route flag, similar to ipv4, from David
Ahern.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1925 commits)
tls: Add support for encryption using async offload accelerator
ip6mr: fix stale iterator
net/sched: kconfig: Remove blank help texts
openvswitch: meter: Use 64-bit arithmetic instead of 32-bit
tcp_nv: fix potential integer overflow in tcpnv_acked
r8169: fix RTL8168EP take too long to complete driver initialization.
qmi_wwan: Add support for Quectel EP06
rtnetlink: enable IFLA_IF_NETNSID for RTM_NEWLINK
ipmr: Fix ptrdiff_t print formatting
ibmvnic: Wait for device response when changing MAC
qlcnic: fix deadlock bug
tcp: release sk_frag.page in tcp_disconnect
ipv4: Get the address of interface correctly.
net_sched: gen_estimator: fix lockdep splat
net: macb: Handle HRESP error
net/mlx5e: IPoIB, Fix copy-paste bug in flow steering refactoring
ipv6: addrconf: break critical section in addrconf_verify_rtnl()
ipv6: change route cache aging logic
i40e/i40evf: Update DESC_NEEDED value to reflect larger value
bnxt_en: cleanup DIM work on device shutdown
...
* lorenzo/pci/cadence:
PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller
dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe endpoint controller
PCI: endpoint: Fix EPF device name to support multi-function devices
PCI: endpoint: Add the function number as argument to EPC ops
PCI: cadence: Add host driver for Cadence PCIe controller
dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller
PCI: Add vendor ID for Cadence
PCI: Add generic function to probe PCI host controllers
PCI: generic: fix missing call of pci_free_resource_list()
PCI: OF: Add generic function to parse and allocate PCI resources
PCI: Regroup all PCI related entries into drivers/pci/Makefile
Conflicts:
drivers/pci/of.c
include/linux/pci.h
* pci/virtualization:
PCI: Expose ari_enabled in sysfs
PCI: Add function 1 DMA alias quirk for Marvell 9128
PCI: Mark Ceton InfiniTV4 INTx masking as broken
xen/pci: Use acpi_noirq_set() helper to avoid #ifdef
* pci/resource:
PCI: tegra: Remove PCI_REASSIGN_ALL_BUS use on Tegra
resource: Set type when reserving new regions
resource: Set type of "reserve=" user-specified resources
irqchip/i8259: Set I/O port resource types correctly
powerpc: Set I/O port resource types correctly
MIPS: Set I/O port resource types correctly
vgacon: Set VGA struct resource types
PCI: Use dev_info() rather than dev_err() for ROM validation
PCI: Remove PCI_REASSIGN_ALL_RSRC use on arm and arm64
PCI: Remove sysfs resource mmap warning
Conflicts:
drivers/pci/rom.c
* pci/misc:
PCI: Add dummy pci_irqd_intx_xlate() for CONFIG_PCI=n build
PCI: Add wrappers for dev_printk()
PCI: Remove unnecessary messages for memory allocation failures
PCI: Add #defines for Completion Timeout Disable feature
hinic: Replace PCI pool old API
net: e100: Replace PCI pool old API
block: DAC960: Replace PCI pool old API
MAINTAINERS: Include more PCI files
PCI: Remove unneeded kallsyms include
powerpc/pci: Unroll two pass loop when scanning bridges
powerpc/pci: Use for_each_pci_bridge() helper
* pci/enumeration:
RDMA/qedr: Use pci_enable_atomic_ops_to_root()
PCI: Add pci_enable_atomic_ops_to_root()
PCI: Make PCI_SCAN_ALL_PCIE_DEVS work for Root as well as Downstream Ports
* pci/dpc:
PCI/DPC: Reformat DPC register definitions
PCI/DPC: Add and use DPC Status register field definitions
PCI/DPC: Squash dpc_rp_pio_get_info() into dpc_process_rp_pio_error()
PCI/DPC: Remove unnecessary RP PIO register structs
PCI/DPC: Push dpc->rp_pio_status assignment into dpc_rp_pio_get_info()
PCI/DPC: Squash dpc_rp_pio_print_error() into dpc_rp_pio_get_info()
PCI/DPC: Make RP PIO log size check more generic
PCI/DPC: Rename local "status" to "dpc_status"
PCI/DPC: Squash dpc_rp_pio_print_tlp_header() into dpc_rp_pio_print_error()
PCI/DPC: Process RP PIO details only if RP PIO extensions supported
PCI/DPC: Read RP PIO Log Size once at probe
PCI/DPC: Rename struct dpc_dev.rp to rp_extensions
PCI/DPC: Add local variable for DPC capability offset
PCI/DPC: Rename interrupt_event_handler() to dpc_work()
PCI/DPC: Fix interrupt message number print
PCI/DPC: Enable DPC only if AER is available
PCI/DPC: Fix shared interrupt handling
This patch adds support to the Cadence PCIe controller in endpoint mode.
Since pieces of source code are shared with the host driver (Root
Complex mode), we create a new directory under drivers/pci dedicated to
the Cadence PCIe controller. The common code is placed into
drivers/pci/cadence/pcie-cadence.c and used by both the host and
endpoint controller drivers.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Fix the pci_epf_make() function so it can now bind many EPF devices to the
same EPF driver.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
This patch updates the prototype of most handlers from 'struct
pci_epc_ops' so the EPC library can now support multi-function devices.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
This patch adds support to the Cadence PCIe controller in host mode.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
This patchs moves generic source code from
drivers/pci/host/pci-host-common.c into drivers/pci/probe.c.
Indeed the extracted lines of code were duplicated by many host
controller drivers. Regrouping them into a generic function gives a
change to properly share this code without introducing a useless
dependency to PCI_HOST_COMMON, which selects PCI_ECAM when not needed by
most host controller drivers.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Call pci_free_resource_list() from pci_host_common_probe() when probing
fails, as done inside gen_pci_init() when this later function fails.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
The patch moves the gen_pci_parse_request_of_pci_ranges() function from
drivers/pci/host/pci-host-common.c into drivers/pci/of.c to easily share
common source code between PCI host drivers.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Clean up drivers/Makefile by moving the pci/endpoint and pci/dwc entries
from drivers/Makefile into drivers/pci/Makefile.
Since we don't want to introduce any dependency between CONFIG_PCI and
CONFIG_PCI_ENDPOINT, we now always execute drivers/pci/Makefile.
Hence all Makefiles in drivers/pci/ were updated accordingly so no file is
compiled when CONFIG_PCI is not defined.
Also, we add a comment to reinforce that EPC and EPF libraries must be
initialized before their users. Hence built-in EPC drivers, such as
those of Designware, are linked after the endpoint core libraries.
Finally, we add another comment to explain why obj-y has been chosen
instead of obj-$(CONFIG_PCIE_DW) to parse the dwc/ sub-folder.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Pull poll annotations from Al Viro:
"This introduces a __bitwise type for POLL### bitmap, and propagates
the annotations through the tree. Most of that stuff is as simple as
'make ->poll() instances return __poll_t and do the same to local
variables used to hold the future return value'.
Some of the obvious brainos found in process are fixed (e.g. POLLIN
misspelled as POLL_IN). At that point the amount of sparse warnings is
low and most of them are for genuine bugs - e.g. ->poll() instance
deciding to return -EINVAL instead of a bitmap. I hadn't touched those
in this series - it's large enough as it is.
Another problem it has caught was eventpoll() ABI mess; select.c and
eventpoll.c assumed that corresponding POLL### and EPOLL### were
equal. That's true for some, but not all of them - EPOLL### are
arch-independent, but POLL### are not.
The last commit in this series separates userland POLL### values from
the (now arch-independent) kernel-side ones, converting between them
in the few places where they are copied to/from userland. AFAICS, this
is the least disruptive fix preserving poll(2) ABI and making epoll()
work on all architectures.
As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and
it will trigger only on what would've triggered EPOLLWRBAND on other
architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered
at all on sparc. With this patch they should work consistently on all
architectures"
* 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
make kernel-side POLL... arch-independent
eventpoll: no need to mask the result of epi_item_poll() again
eventpoll: constify struct epoll_event pointers
debugging printk in sg_poll() uses %x to print POLL... bitmap
annotate poll(2) guts
9p: untangle ->poll() mess
->si_band gets POLL... bitmap stored into a user-visible long field
ring_buffer_poll_wait() return value used as return value of ->poll()
the rest of drivers/*: annotate ->poll() instances
media: annotate ->poll() instances
fs: annotate ->poll() instances
ipc, kernel, mm: annotate ->poll() instances
net: annotate ->poll() instances
apparmor: annotate ->poll() instances
tomoyo: annotate ->poll() instances
sound: annotate ->poll() instances
acpi: annotate ->poll() instances
crypto: annotate ->poll() instances
block: annotate ->poll() instances
x86: annotate ->poll() instances
...
Add definitions for DPC Status register fields and use them in the code.
No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sinan Kaya <okaya@codeaurora.org>
dpc_process_rp_pio_error() only calls dpc_rp_pio_get_info(), so squash them
together. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sinan Kaya <okaya@codeaurora.org>
We read and immediately print the RP PIO log registers. We don't save
them, so there's no need to define structs for them. Remove the structs
and read the registers into local variables instead. No functional change
intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sinan Kaya <okaya@codeaurora.org>
Move the dpc->rp_pio_status assignment into dpc_rp_pio_get_info() since
that's where we read rp_pio->status anway. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sinan Kaya <okaya@codeaurora.org>
Separating dpc_rp_pio_print_error() doesn't really provide any useful
abstraction, so squash it into its caller, dpc_rp_pio_get_info(). No
functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sinan Kaya <okaya@codeaurora.org>
In dpc_probe(), we set dpc->rp_log_size to zero if we think the hardware
reports an invalid size. In this case, we could have dpc->rp_extensions
set but dpc->rp_log_size == 0, and we should print the basic RP PIO
registers but not the variable-size portion. We already checked for
dpc->rp_log_size < 4 above, so this patch is just for consistency of style.
No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sinan Kaya <okaya@codeaurora.org>
In dpc_rp_pio_get_info() rename the local "status" variable to
"dpc_status". This is to make room for another variable named "status" in
a subsequent patch. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sinan Kaya <okaya@codeaurora.org>
Separating dpc_rp_pio_print_tlp_header() doesn't really provide any useful
abstraction, so squash it into its caller, dpc_rp_pio_print_error(). No
functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sinan Kaya <okaya@codeaurora.org>
The RP PIO registers (status, mask, severity, etc) are only implemented if
the "RP Extensions for DPC" bit is set in the DPC Capabilities register.
Previously we called dpc_process_rp_pio_error(), which reads and decodes
those RP PIO registers, whenever the DPC Status register indicated an "RP
PIO error" (Trigger Reason == 3 and Trigger Reason Extension == 0).
It does seem reasonable to assume that DPC Status would only indicate an RP
PIO error if the RP extensions are supported, but PCIe r4.0, sec 7.9.15.4,
is actually not explicit about that: it does not say "Trigger Reason
Extension == 0 is valid only for Root Ports that support RP Extensions for
DPC."
Check whether the RP Extensions for DPC are supported before trying to read
the RP PIO registers.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sinan Kaya <okaya@codeaurora.org>
The RP PIO Log Size is a read-only field in the DPC Capability, so it is
constant and known at probe-time, but previously we read it every time we
processed an RP PIO error.
Read it once in dpc_probe() (if the RP Extensions for DPC are supported)
and remember the size in struct dpc_dev. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sinan Kaya <okaya@codeaurora.org>
"rp" is ambiguous: it might mean "this DPC device is a Root Port." But in
fact, it means "this DPC device is a Root Port *and* it supports a set of
DPC Extensions."
Rename "rp" to "rp_extensions" to make this more clear. No functional
change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sinan Kaya <okaya@codeaurora.org>
Add a local variable for DPC capability offset and replace repeated use of
"dpc->cap_pos" with simply "cap". No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sinan Kaya <okaya@codeaurora.org>
7441b0627e ("s390/pci: PCI hotplug support via SCLP") added
s390_pci_hpc.c, which included this license information:
+MODULE_LICENSE("GPL");
Based on "git show 7441b0627e22:include/linux/module.h", that "GPL" string
means "GPL v2 or later":
* "GPL" [GNU Public License v2 or later]
0729dcf248 ("s390: hotplug: make pci_hpc explicitly non-modular")
subsequently replaced the MODULE_LICENSE() with a "License: GPL" comment.
Add SPDX GPL-2.0+ and remove the "License: GPL" comment, relying on the
assertion in b24413180f ("License cleanup: add SPDX GPL-2.0 license
identifier to files with no license") that the SPDX identifier may be used
instead of the full boilerplate text.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Add SPDX GPL-2.0+ to all PCI files that specified the GPL and allowed
either GPL version 2 or any later version.
Remove the boilerplate GPL version 2 or later language, relying on the
assertion in b24413180f ("License cleanup: add SPDX GPL-2.0 license
identifier to files with no license") that the SPDX identifier may be used
instead of the full boilerplate text.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX GPL-2.0 to all PCI files that referred to the kernel default
"COPYING" file, which specifies GPL version 2.
Remove the boilerplate language referring to the GPL and "COPYING", relying
on the assertion in b24413180f ("License cleanup: add SPDX GPL-2.0
license identifier to files with no license") that the SPDX identifier may
be used instead of the full boilerplate text.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX GPL-2.0 to all PCI files that specified the GPL version 2 license.
Remove the boilerplate GPL version 2 language, relying on the assertion in
b24413180f ("License cleanup: add SPDX GPL-2.0 license identifier to
files with no license") that the SPDX identifier may be used instead of the
full boilerplate text.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Devices can go offline when erors reported. This patch adds a change
to the kernel object and lets udev know of error. When device resumes,
a change is also set reporting device as online. Therefore, EEH and
AER events are better propagated to user space for PCI devices in all
arches.
Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Signed-off-by: Juan J. Alvarez <jjalvare@linux.vnet.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Rename interrupt_event_handler() to dpc_work() so there's more useful
information in stack traces and similar situations. No functional change
intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sinan Kaya <okaya@codeaurora.org>
The interrupt message number is the first 5 bits, but the driver was
masking only the first 4 bits. Fix that by using the existing
define.
Signed-off-by: Keith Busch <keith.busch@intel.com>
[bhelgaas: remove reformatting (done by another patch)]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The "Determination of DPC Control" implementation note in PCIe r4.0, sec
6.1.10, recommends the operating system always link DPC control to the
control of AER, as the two functionalities are strongly connected.
To avoid conflicts over whether platform firmware or the OS controls DPC,
enable DPC only if AER is enabled in the OS, and the device's error
handling does not have firmware-first AER handling.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
b24413180f ("License cleanup: add SPDX GPL-2.0 license identifier to
files with no license") added SPDX GPL-2.0 to several PCI files that
previously contained no license information.
Add SPDX GPL-2.0 to all other PCI files that did not contain any license
information and hence were under the default GPL version 2 license of the
kernel.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the DT PCI code is merged into drivers/pci, of_irq_parse_pci() can
be static.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Frank Rowand <frowand.list@gmail.com>
The Atomic Operations feature (PCIe r4.0, sec 6.15) allows atomic
transctions to be requested by, routed through and completed by PCIe
components. Routing and completion do not require software support.
Component support for each is detectable via the DEVCAP2 register.
A Requester may use AtomicOps only if its PCI_EXP_DEVCTL2_ATOMIC_REQ is
set. This should be set only if the Completer and all intermediate routing
elements support AtomicOps.
A concrete example is the AMD Fiji-class GPU (which is capable of making
AtomicOp requests), below a PLX 8747 switch (advertising AtomicOp routing)
with a Haswell host bridge (advertising AtomicOp completion support).
Add pci_enable_atomic_ops_to_root() for per-device control over AtomicOp
requests. This checks to be sure the Root Port supports completion of the
desired AtomicOp sizes and the path to the Root Port supports routing the
AtomicOps.
Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
[bhelgaas: changelog, comments, whitespace]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Some multifunction PCI devices with more than 8 functions use "alternative
routing-ID interpretation" (ARI), which means the 8-bit device/function
number field will be interpreted as 8 bits specifying the function number
(the device number is 0 implicitly), rather than the upper 5 bits
specifying the device number and the lower 3 bits specifying the function
number. The kernel can enable and use this.
Expose in a sysfs attribute whether the kernel has enabled ARI, so that a
program in userspace won't have to parse PCI devices and PCI configuration
space to figure out if it is enabled. This will allow better predictable
network naming using PCI function numbers without using PCI bus or device
numbers, which is desirable because bus and device numbers can change with
system configuration but function numbers will not.
Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Certain Thunderbolt 1 controllers claim to support Command Completed events
(value of 0b in the No Command Completed Support field of the Slot
Capabilities register) but in reality they neither set the Command
Completed bit in the Slot Status register nor signal a Command Completed
interrupt:
8086:1513 CV82524 [Light Ridge 4C 2010]
8086:151a DSL2310 [Eagle Ridge 2C 2011]
8086:151b CVL2510 [Light Peak 2C 2010]
8086:1547 DSL3510 [Cactus Ridge 4C 2012]
8086:1548 DSL3310 [Cactus Ridge 2C 2012]
8086:1549 DSL2210 [Port Ridge 1C 2011]
All known newer chips (Redwood Ridge and onwards) set No Command Completed
Support, indicating that they do not support Command Completed events.
The user-visible impact is that after unplugging such a device, 2 seconds
elapse until pciehp is unbound. That's because on ->remove,
pcie_write_cmd() is called via pcie_disable_notification() and every call
to pcie_write_cmd() takes 2 seconds (1 second for each invocation of
pcie_wait_cmd()):
[ 337.942727] pciehp 0000:0a:00.0:pcie204: Timeout on hotplug command 0x1038 (issued 21176 msec ago)
[ 340.014735] pciehp 0000:0a:00.0:pcie204: Timeout on hotplug command 0x0000 (issued 2072 msec ago)
That by itself has always been unpleasant, but the situation has become
worse with commit cc27b735ad ("PCI/portdrv: Turn off PCIe services during
shutdown"): Now pciehp is unbound on ->shutdown. Because Thunderbolt
controllers typically have 4 hotplug ports, every reboot and shutdown is
now delayed by 8 seconds, plus another 2 seconds for every attached
Thunderbolt 1 device.
Thunderbolt hotplug slots are not physical slots that one inserts cards
into, but rather logical hotplug slots implemented in silicon. Devices
appear beyond those logical slots once a PCI tunnel is established on top
of the Thunderbolt Converged I/O switch. One would expect commands written
to the Slot Control register to be executed immediately by the silicon, so
for simplicity we always assume NoCompl+ for Thunderbolt ports.
Fixes: cc27b735ad ("PCI/portdrv: Turn off PCIe services during shutdown")
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: stable@vger.kernel.org # v4.12+
Cc: Sinan Kaya <okaya@codeaurora.org>
Cc: Yehezkel Bernat <yehezkel.bernat@intel.com>
Cc: Michael Jamet <michael.jamet@intel.com>
Cc: Andreas Noever <andreas.noever@gmail.com>
In order to avoid triggering a NULL pointer dereference in
exynos_pcie_probe() a check must be put in place to detect if
the init_clk_resources hook is initialized before calling it.
Add the respective function pointer check in exynos_pcie_probe().
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
[lorenzo.pieralisi@arm.com: rewrote the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
rpadlpar_core.c: Provide parallel routines to search the older device-
tree properties ("ibm,drc-indexes", "ibm,drc-names", "ibm,drc-types"
and "ibm,drc-power-domains"), or the new property "ibm,drc-info".
The interface to examine the DRC information is changed from a "get"
function that returns values for local verification elsewhere, to a
"check" function that validates the 'name' and/or 'type' of a device
node. This update hides the format of the underlying device-tree
properties, and concentrates the value checks into a single function
without requiring the user to verify whether a search was successful.
Signed-off-by: Michael Bringmann <mwb@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add PCI-specific dev_printk() wrappers and use them to simplify the code
slightly. No functional change intended.
Signed-off-by: Frederick Lawler <fred@fredlawl.com>
[bhelgaas: squash into one patch]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* pm-core: (29 commits)
dmaengine: rcar-dmac: Make DMAC reinit during system resume explicit
PM / runtime: Allow no callbacks in pm_runtime_force_suspend|resume()
PM / runtime: Check ignore_children in pm_runtime_need_not_resume()
PM / runtime: Rework pm_runtime_force_suspend/resume()
PM / wakeup: Print warn if device gets enabled as wakeup source during sleep
PM / core: Propagate wakeup_path status flag in __device_suspend_late()
PM / core: Re-structure code for clearing the direct_complete flag
PM: i2c-designware-platdrv: Optimize power management
PM: i2c-designware-platdrv: Use DPM_FLAG_SMART_PREPARE
PM / mfd: intel-lpss: Use DPM_FLAG_SMART_SUSPEND
PCI / PM: Use SMART_SUSPEND and LEAVE_SUSPENDED flags for PCIe ports
PM / wakeup: Add device_set_wakeup_path() helper to control wakeup path
PM / core: Assign the wakeup_path status flag in __device_prepare()
PM / wakeup: Do not fail dev_pm_attach_wake_irq() unnecessarily
PM / core: Direct DPM_FLAG_LEAVE_SUSPENDED handling
PM / core: Direct DPM_FLAG_SMART_SUSPEND optimization
PM / core: Add helpers for subsystem callback selection
PM / wakeup: Drop redundant check from device_init_wakeup()
PM / wakeup: Drop redundant check from device_set_wakeup_enable()
PM / wakeup: only recommend "call"ing device_init_wakeup() once
...
The trailing semicolon is an empty statement that does no operation.
Removing it since it doesn't do anything.
Signed-off-by: Luis de Bethencourt <luisbg@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Following what has been done for other subsystems, move the remaining PCI
related code out of drivers/of/ and into drivers/pci/of.c
With this, we can kill a few kconfig symbols.
Signed-off-by: Rob Herring <robh@kernel.org>
[bhelgaas: minor whitespace, comment cleanups]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Frank Rowand <frowand.list@gmail.com>
Per ebfdc40969 ("checkpatch: attempt to find unnecessary 'out of memory'
messages"), when a memory allocation fails, the memory subsystem emits
generic "out of memory" messages (see slab_out_of_memory() for some of this
logging). Therefore, additional error messages in the caller don't add
much value.
Remove messages that merely report "out of memory".
This preserves some messages that report additional information, e.g.,
allocation failures that mean we drop hotplug events.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
[bhelgaas: changelog, squash patches, make similar changes to acpiphp,
cpqphp, ibmphp, keep warning when dropping hotplug event]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Use pci_get_domain_bus_and_slot() with a domain number of 0 where we can't
extract the domain number. Other places, use the actual domain number from
the device.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
When we have a pci_dev, extract the domain number from it.
The config access syscalls don't allow the user to supply a domain number,
so they only work on devices in domain 0, so we can just hard-code that.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
[bhelgaas: squash quirk & syscall patches together]
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
Hard-coding the domain parameter as 0 since the code doesn't seem to be
ready for multiple domains.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.
Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().
Hard-coding the domain number as 0. The code doesn't seem to be ready
for multiple domains.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
The Marvell 9128 is the original device generating bug 42679, from which
many other Marvell DMA alias quirks have been sourced, but we didn't have
positive confirmation of the fix on 9128 until now.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=42679
Link: https://www.spinics.net/lists/kvm/msg161459.html
Reported-by: Binarus <lists@binarus.de>
Tested-by: Binarus <lists@binarus.de>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tegra host driver is using pci_find_host_bridge() to get private data;
this can be easily avoided by using bus->sysdata to store and get private
data removing the pci_find_host_bridge() dependency.
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
[lorenzo.pieralisi@arm.com: rewrote commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Thierry Reding <treding@nvidia.com>
HiSilicon Hip06/Hip07 can operate as either a Root Port or an Endpoint. It
always advertises an MSI capability, but it can only generate MSIs when in
Endpoint mode.
The device has the same Vendor and Device IDs in both modes, so check the
Class Code and disable MSI only when operating as a Root Port.
[bhelgaas: changelog]
Fixes: 72f2ff0deb ("PCI: Disable MSI for HiSilicon Hip06/Hip07 Root Ports")
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
Cc: stable@vger.kernel.org # v4.11+
With the inbound DMA mapping supported added, the iProc PCIe driver
parses DT property "dma-ranges" through call to
"of_pci_dma_range_parser_init()". In the case of BCMA, this results in a
NULL pointer deference due to a missing of_node.
Fix this by adding a guard in pcie-iproc-platform.c to only enable the
inbound DMA mapping logic when DT property "dma-ranges" is present.
Fixes: dd9d4e7498 ("PCI: iproc: Add inbound DMA mapping support")
Reported-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Rafał Miłecki <rafal@milecki.pl>
cc: <stable@vger.kernel.org> # 4.10+
get_device_error_info() reads error information from registers in the AER
capability. If we call it for a device that has no AER capability, it
should return an error, but previously it returned success.
Return 0 (error) if the device doesn't have an AER capability.
Signed-off-by: Keith Busch <keith.busch@intel.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Bridge primary, secondary, and subordinate bus numbers power up as zero,
and Tegra firmware doesn't program them.
pci_scan_bridge_extend() automatically programs these bus numbers if they
are zero, so we don't need to set the PCI_REASSIGN_ALL_BUS flag for Tegra.
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
After commit 7232888366 ("of: restrict DMA configuration"),
of_dma_configure() doesn't configure the coherent_dma_mask/dma_mask
of endpoint function device (since it doesn't have a DT node associated
with and hence no dma-ranges property), resulting in
dma_alloc_coherent() (used in pci_epf_alloc_space()) to fail.
Fix it by making dma_alloc_coherent() use EPC's device for allocating
memory address.
Link: http://lkml.kernel.org/r/64d63468-d28f-8fcd-a6f3-cf2a6401c8cb@ti.com
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
[lorenzo.pieralisi@arm.com: tweaked commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Tested-by: Cyrille Pitchen <cyrille.pitchen@free-electrons.com>
Tested-by: Niklas Cassel <niklas.cassel@axis.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
DPC supports shared interrupts, but it plays very loosely with testing
whether the interrupt is generated by DPC before generating spurious log
messages, such as:
dpc 0000:10:01.2:pcie010: DPC containment event, status:0x1f00 source:0x0000
Testing the status register for zero or -1 is not sufficient when the
device supports the RP PIO First Error Pointer register. Change this to
test whether the interrupt is enabled in the control register, retaining
the device present test, and that the status reports the interrupt as
signaled and DPC is triggered, clearing as a spurious interrupt otherwise.
Additionally, since the interrupt is actually serviced by a workqueue,
disable the interrupt in the control register until that completes or else
we may never see it execute due to further incoming interrupts. A software
generated DPC floods the system otherwise.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
Reviewed-by: Keith Busch <keith.busch@intel.com>
It is possible that more than one legacy IRQ may be set at the same
time, therefore iterate and handle all the pending INTx interrupts
before clearing the status and exiting the IRQ handler. Otherwise, some
interrupts would be lost.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Legacy INTD IRQ handling is broken on dra7xx due to fact that driver
uses hwirq in range of 1-4 for INTA, INTD whereas IRQ domain is of size
4 which is numbered 0-3. Therefore when INTD IRQ line is used with
pci-dra7xx driver following warning is seen:
WARNING: CPU: 0 PID: 1 at kernel/irq/irqdomain.c:342 irq_domain_associate+0x12c/0x1c4
error: hwirq 0x4 is too large for dummy
Fix this by using pci_irqd_intx_xlate() helper to translate the INTx 1-4
range into the 0-3 as done in other PCIe drivers.
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Reported-by: Chris Welch <Chris.Welch@viavisolutions.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Make the PCIe port driver set DPM_FLAG_SMART_SUSPEND and
DPM_FLAG_LEAVE_SUSPENDED for the devices handled by it to benefit
from the opportunistic optimizations in the PCI layer enabled by
these flags.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
This driver creates various const structures that it stores in the
data field of an of_device_id array.
Adding const to the declaration of the location that receives the
const value from the data field ensures that the compiler will
continue to check that the value is not modified. Furthermore, the
const-discarding cast on the extraction from the data field is no
longer needed.
Done using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
In case of error, the function devm_ioremap() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should be
replaced with NULL test.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Exynos platforms have a PCI PHY driver in the PHY framework that can be
used by the PCI host bridge drivers to initialize and manage the PHY.
Remove the deprecated PHY initialization code in the Exynos PCI host
bridge driver by updating the driver to use the PHY framework API;
modify the DT binding documentation accordingly.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Pull x86 fixes from Thomas Gleixner:
"A couple of fixlets for x86:
- Fix the ESPFIX double fault handling for 5-level pagetables
- Fix the commandline parsing for 'apic=' on 32bit systems and update
documentation
- Make zombie stack traces reliable
- Fix kexec with stack canary
- Fix the delivery mode for APICs which was missed when the x86
vector management was converted to single target delivery. Caused a
regression due to the broken hardware which ignores affinity
settings in lowest prio delivery mode.
- Unbreak modules when AMD memory encryption is enabled
- Remove an unused parameter of prepare_switch_to"
* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Switch all APICs to Fixed delivery mode
x86/apic: Update the 'apic=' description of setting APIC driver
x86/apic: Avoid wrong warning when parsing 'apic=' in X86-32 case
x86-32: Fix kexec with stack canary (CONFIG_CC_STACKPROTECTOR)
x86: Remove unused parameter of prepare_switch_to
x86/stacktrace: Make zombie stack traces reliable
x86/mm: Unbreak modules that use the DMA API
x86/build: Make isoimage work on Debian
x86/espfix/64: Fix espfix double-fault handling on 5-level systems
Some of the APIC incarnations are operating in lowest priority delivery
mode. This worked as long as the vector management code allocated the same
vector on all possible CPUs for each interrupt.
Lowest priority delivery mode does not necessarily respect the affinity
setting and may redirect to some other online CPU. This was documented
somewhere in the old code and the conversion to single target delivery
missed to update the delivery mode of the affected APIC drivers which
results in spurious interrupts on some of the affected CPU/Chipset
combinations.
Switch the APIC drivers over to Fixed delivery mode and remove all
leftovers of lowest priority delivery mode.
Switching to Fixed delivery mode is not a problem on these CPUs because the
kernel already uses Fixed delivery mode for IPIs. The reason for this is
that th SDM explicitely forbids lowest prio mode for IPIs. The reason is
obvious: If the irq routing does not honor destination targets in lowest
prio mode then an IPI targeted at CPU1 might end up on CPU0, which would be
a fatal problem in many cases.
As a consequence of this change, the apic::irq_delivery_mode field is now
pointless, but this needs to be cleaned up in a separate patch.
Fixes: fdba46ffb4 ("x86/apic: Get rid of multi CPU affinity")
Reported-by: vcaputo@pengaru.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: vcaputo@pengaru.com
Cc: Pavel Machek <pavel@ucw.cz>
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1712281140440.1688@nanos
Lots of overlapping changes. Also on the net-next side
the XDP state management is handled more in the generic
layers so undo the 'net' nfp fix which isn't applicable
in net-next.
Include a necessary change by Jakub Kicinski, with log message:
====================
cls_bpf no longer takes care of offload tracking. Make sure
netdevsim performs necessary checks. This fixes a warning
caused by TC trying to remove a filter it has not added.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for the ARTPEC-7 SoC in the artpec6 driver.
The ARTPEC-6 SoC and the ARTPEC-7 SoC are very similar.
Unfortunately, some fields in the PCIECFG and PCIESTAT
register have changed.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Waiting for the PHY while the core was held in reset worked for artpec6,
but for artpec7, in order to read the required registers, the core has to
be out of reset.
Refactor the code so we always wait for the PHY after the core has been
deasserted, since this works for both artpec6 and artpec7.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
The current cpu addr fixup mask for ARTPEC-6, GENMASK(27, 0), is wrong.
The correct cpu addr fixup mask for ARTPEC-6 is GENMASK(28, 0).
However, having a hardcoded cpu addr fixup mask in each driver is
arguably wrong.
A device tree property called something like "cpu-addr-fixup-mask"
would have been a better solution.
Introducing such a property is not needed though, since we already have
pp->cfg0_base and ep->phys_base, which is derived from already existing
device tree properties.
It is also worth noting that for ARTPEC-7, hardcoding the cpu addr fixup
mask is not possible, since it uses a High Address Bits Look Up Table,
which means that it can, at runtime, map the PCIe window to an arbitrary
address in the 32-bit address space.
By using pp->cfg0_base and ep->phys_base, we avoid hardcoding a mask
in each driver. This should work for ARTPEC-6, DRA7xx, and ARTPEC-7.
I have not changed the code in DRA7xx though, since their existing
code works, but if they want, they could use the same logic as
artpec6_pcie_cpu_addr_fixup, and thus remove their hardcoded mask.
The reason why the fixup mask is needed is explained in commit f4c55c5a3f
("PCI: designware: Program ATU with untranslated address").
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
The PCIe controller integrated in ARTPEC-6 SoCs is capable of operating in
endpoint mode. Add endpoint mode support to the artpec6 driver.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Split artpec6_pcie_establish_link() into smaller functions
to better match other drivers such as dra7xx and imx6.
This is also done to prepare for endpoint mode support.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Use BIT and GENMASK macros to improve readability.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Commit b015b37e66 ("PCI: artpec6: Stop enabling writes to
DBI read-only registers") removed the only write using these
defines, but it did not remove the defines.
Remove the defines since they are now unused.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
The dra7xx driver supports both host and ep mode.
When enabling support for only one of the modes, help the compiler
to remove code for the mode that we have not enabled in the driver.
By adding if (!IS_ENABLED(CONFIG_PCI_DRA7XX_HOST)) return -ENODEV;
anything after that statement will get silently dropped by the compiler,
including static functions and structures that are referenced indirectly
from there.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Assign pp->ops in *_add_pcie_port() to match how it is done in other
drivers like exynos, imx7, keystone, armada8k, artpec6, designware-plat,
hisi, kirin and spear13xx.
This is probably a remainder since when dev and ops were assigned as
members to pp. Since we now assign them as members to struct dw_pcie,
the pp->ops assignment should definitely be in dra7xx_add_pcie_port().
This is done so that the compiler (in a later commit) can remove more
code when enabling only one of the two supported modes (host/ep) in
the dra7xx driver.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Refactor the Kconfig and Makefile handling for host/ep mode, since
the previous handling was a bit unorthodox and would have been a bit
bloated once more DWC based controllers added support for ep mode.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Add a generic function for raising MSI irqs that can be used by all
DWC based controllers.
Note that certain controllers, like DRA7xx, have a special convenience
register for raising MSI irqs that doesn't require you to explicitly map
the MSI address. Therefore, it is likely that certain drivers will
not use this generic function, even if they can.
Tested-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
Remove the static keyword from dw_pcie_ep_reset_bar() so that
pci-dra7xx.c does not need its own copy of dw_pcie_ep_reset_bar().
Tested-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Certain SoCs need to map the MSI address in raise_irq.
To map an address, you first need to call pci_epc_mem_alloc_addr(),
however, pci_epc_mem_alloc_addr() calls ioremap() (which can sleep).
Since raise_irq is only called from atomic context, we can't call
pci_epc_mem_alloc_addr() from raise_irq.
Pre-allocate a page in dw_pcie_ep_init(), so that this page can later
be used to map/unmap the MSI address in raise_irq.
Tested-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
Certain registers that pcie-designware-ep tries to write to are read-only
registers. However, these registers can become read/write if we first
enable the DBI_RO_WR_EN bit. Set/unset the DBI_RO_WR_EN bit before/after
writing these registers.
Tested-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
Previously, dw_pcie_ep_set_msi() wrote all bits in the Message Control
register, thus overwriting the PCI_MSI_FLAGS_64BIT bit.
By clearing the PCI_MSI_FLAGS_64BIT bit, we break MSI
on systems where the RC has set a 64 bit MSI address.
Fix dw_pcie_ep_set_msi() so that it only sets MMC bits.
Tested-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
Use the DMA-API to get the MSI address. This address will be written to
our PCI config space and to the register which determines which AXI
address the DWC IP will spoof for incoming MSI irqs.
Since it is a PCIe endpoint device, rather than the CPU, that is supposed
to write to the MSI address, the proper way to get the MSI address is by
using the DMA API, not by using virt_to_phys().
Using virt_to_phys() might work on some systems, but using the DMA API
should work on all systems.
This is essentially the same thing as allocating a buffer in a driver
to which the endpoint will write to. To do this, we use the DMA API.
Tested-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
Use only 4 KiB space from the available 1 GiB PCIe aperture to access
endpoint configuration space by dynamically moving the AFI_FPCI_BAR base
address. This frees more space for mapping endpoint device BARs on some
Tegra platforms.
The ->add_bus() and ->remove_bus() callbacks are now no longer needed,
so they can be removed.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
[treding@nvidia.com: various cleanups, update commit message]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Define dra7xx_pcie_shutdown() as a static function as it is not used
in other compilation units.
Signed-off-by: Vignesh R <vigneshr@ti.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Keerthy <j-keerthy@ti.com>
rcar_pcie_parse_request_of_pci_ranges() can fail and return an error
code, but this is not checked nor handled.
Fix this by adding the missing error handling.
Fixes: 5d2917d469 ("PCI: rcar: Convert to DT resource parsing API")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
The changes in commit 9af275be15 ("PCI: xgene: Convert PCI scan API to
pci_scan_root_bus_bridge()") converted the xgene PCI host driver to
the new pci_scan_root_bus_bridge() bus scanning API but erroneously left
the existing pci_scan_child_bus() call in place which resulted in duplicate
PCI bus enumerations.
Remove the leftover pci_scan_child_bus() call to properly complete the API
conversion.
Fixes: 9af275be15 ("PCI: xgene: Convert PCI scan API to pci_scan_root_bus_bridge()")
Tested-by: Khuong Dinh <kdinh@apm.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: <stable@vger.kernel.org> # 4.13+
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Tanmay Inamdar <tinamdar@apm.com>
Fix child-node lookup during initialisation which was using the wrong
OF-helper and ended up searching the whole device tree depth-first
starting at the parent rather than just matching on its children.
To make things worse, the parent pci node could end up being prematurely
freed as of_find_node_by_name() drops a reference to its first argument.
Any matching child interrupt-controller node was also leaked.
Fixes: 0c4ffcfe1f ("PCI: keystone: Add TI Keystone PCIe driver")
Cc: stable <stable@vger.kernel.org> # 3.18
Acked-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
[lorenzo.pieralisi@arm.com: updated commit subject]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
->get_msi() now checks MSI_EN bit in the MSI CAPABILITY register to
find whether the host supports MSI instead of using the
MSI ADDRESS in the MSI CAPABILITY register.
This fixes the issue with the following sequence
'modprobe pci_endpoint_test' enables MSI
'rmmod pci_endpoint_test' disables MSI but MSI address (in EP's
capability register) has a valid value
'modprobe pci_endpoint_test no_msi=1' - Since MSI address (in EP's
capability register) has a valid value (set during the previous
insertion of the module), EP thinks host supports MSI.
Fixes: f8aed6ec62 ("PCI: dwc: designware: Add EP mode support")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
find_first_zero_bit()'s parameter 'size' is defined in bits,
not in bytes.
Calling find_first_zero_bit() with the wrong size unit
will lead to insidious bugs.
Fix this by calling find_first_zero_bit() with size BITS_PER_LONG,
rather than sizeof() and add missing find_first_zero_bit() return
handling.
Fixes: d746799116 ("PCI: endpoint: Introduce configfs entry for configuring EP functions")
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
func_no is a member of struct pci_epf.
Since struct pci_epf is used as an argument to pci_epc_add_epf() (to
bind an endpoint function to a controller), struct pci_epf.func_no
should be populated before calling pci_epc_add_epf().
Initialize the struct pci_epf.func_no member before calling
pci_epc_add_epf(), to fix the endpoint function binding to
an endpoint controller.
Fixes: d746799116 ("PCI: endpoint: Introduce configfs entry for configuring EP functions")
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
[lorenzo.pieralisi@arm.com: rewrote the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Suggested-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
find_first_zero_bit()'s parameter 'size' is defined in bits,
not in bytes.
find_first_zero_bit() is called with size in bytes rather than bits,
which thus defines a too low upper limit, causing
dw_pcie_ep_inbound_atu() to assign iatu index #4 to both bar 4
and bar 5, which makes bar 5 overwrite the settings set by bar 4.
Since the sizes of the bitmaps are known, dynamically allocate the
bitmaps, and use the correct size when calling find_first_zero_bit().
Additionally, make sure that ep->num_ob_windows and ep->num_ib_windows,
which are obtained from device tree, are smaller than the maximum number
of iATUs (MAX_IATU_IN/MAX_IATU_OUT).
Fixes: f8aed6ec62 ("PCI: dwc: designware: Add EP mode support")
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
PCI_COMMAND_INTX_DISABLE is writable on the Ceton InfiniTV4, indicating
that the device supports disabling the INTx# signal, but it apparently
doesn't work.
Mark the device so we know we can't use PCI_COMMAND_INTX_DISABLE to disable
its interrupts.
Link: https://lkml.kernel.org/r/92a65068-60b2-c1a8-9e17-ac41fe3c5c93@code.jackst.com
Reported-by: John Strader <strader.john@code.jackst.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Add device IDs for PSX 24xG3 and PSX 48xG3. These are valid devices that
were missing from the existing device ID table for the Switchtec driver.
Signed-off-by: Kelvin Cao <kelvin.cao@microsemi.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Add a new event type that is newly exposed by recent firmware. The event
will never occur if the firmware is too old. If user space tries to use
this event in an older kernel, it will just get an EINVAL which is
perfectly acceptable in the existing user space code.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
On AMD GPUs, we use several mechanisms to fetch the VBIOS ROM depending on
the platform. We try to read the ROM via the ROM BAR and fall back to
other methods in some cases. This leads to spurious error messages from
the PCI ROM code which are harmless in our case. This leads to bugs being
filed, etc. Change these to dev_info() rather than dev_err() to avoid
that.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=198077
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1462438
Link: https://bugs.freedesktop.org/show_bug.cgi?id=98798
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com
On arm, PCI_REASSIGN_ALL_RSRC is used only in pcibios_assign_all_busses(),
which helps decide whether to reconfigure bridge bus numbers. It has
nothing to do with BAR assignments. On arm64 and powerpc,
pcibios_assign_all_busses() tests PCI_REASSIGN_ALL_BUS, which makes more
sense.
Align arm with arm64 and powerpc, so they all use PCI_REASSIGN_ALL_BUS for
pcibios_assign_all_busses().
Remove PCI_REASSIGN_ALL_RSRC from the generic, Tegra, Versatile, and
R-Car drivers. These drivers are used only on arm or arm64, where
PCI_REASSIGN_ALL_RSRC is not used after this change, so removing it
should have no effect.
No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
When a process uses sysfs and tries to mmap more space than is available in
a PCI BAR, we emit a warning and a backtrace. The mmap fails anyway, so
the backtrace is mainly for debugging. But in general we don't emit kernel
messages when syscalls return failure.
The similar procfs mmap path simply fails the mmap with no warning. Remove
the sysfs warning.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The file was converted from print_fn_descriptor_symbol() to %pF some time
ago (c9bbb4abb6 "PCI: use %pF instead of print_fn_descriptor_symbol()
in quirks.c"). kallsyms does not seem to be needed anymore.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
When removing a bridge, pciehp_unconfigure_device() reads the
PCI_BRIDGE_CONTROL byte. If this is a surprise hot-unplug, the device is
already gone and the read returns ~0, which pciehp_unconfigure_device()
interprets as having PCI_BRIDGE_CTL_VGA set. This results in failure of
the remove operation:
pciehp 0000:00:1c.0:pcie004: Slot(0): Link Down
pciehp 0000:00:1c.0:pcie004: Slot(0): Card present
pciehp 0000:00:1c.0:pcie004: Cannot remove display device 0000:01:00.0
Because of this the hierarchy is left untouched preventing further hotplug
operations.
Now, it is not clear why the check is there in the first place and why we
would like to prevent removing a bridge if it has PCI_BRIDGE_CTL_VGA set.
In case of PCIe surprise hot-unplug, it would not even be possible to
prevent the removal.
Given this and the issue described above, I think it makes sense to drop
the whole PCI_BRIDGE_CONTROL check from pciehp_unconfigure_device(). While
there do the same for shpchp_configure_device() based on the same reasoning
and the fact that the same bug might trigger in standard PCI hotplug as
well.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
PCIe Downstream Ports normally have only a Device 0 below them. To
optimize enumeration, we don't scan for other devices *unless* the
PCI_SCAN_ALL_PCIE_DEVS flag is set by set by quirks or the
"pci=pcie_scan_all" kernel parameter.
Previously PCI_SCAN_ALL_PCIE_DEVS only affected scanning below Switch
Downstream Ports, not Root Ports.
But the "Nemo" system, also known as the AmigaOne X1000, has a PA Semi Root
Port whose link leads to an AMD/ATI SB600 South Bridge. The Root Port is a
PCIe device, of course, but the SB600 contains only conventional PCI
devices with no visible PCIe port.
Simplify and restructure only_one_child() so that we scan for all possible
devices below Root Ports as well as Switch Downstream Ports when
PCI_SCAN_ALL_PCIE_DEVS is set.
This is enough to make Nemo work with "pci=pcie_scan_all". We would also
like to add a quirk to set PCI_SCAN_ALL_PCIE_DEVS automatically on Nemo so
users wouldn't have to use the "pci=pcie_scan_all" parameter, but we don't
have that yet.
Link: https://lkml.kernel.org/r/CAErSpo55Q8Q=5p6_+uu7ahnw+53ibVDNRXxrzRV9QnUr_9EUfw@mail.gmail.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=198057
Reported-and-Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Several of the interfaces defined in include/linux/pci-aspm.h are used only
internally from the PCI core:
pcie_aspm_init_link_state()
pcie_aspm_exit_link_state()
pcie_aspm_pm_state_change()
pcie_aspm_powersave_config_link()
pcie_aspm_create_sysfs_dev_files()
pcie_aspm_remove_sysfs_dev_files()
Move these to the internal drivers/pci/pci.h header so they don't clutter
the driver interface.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Enable Latency Tolerance Reporting (LTR). Note that LTR must be enabled in
the Root Port first, and must not be enabled in any downstream device
unless the Root Port and all intermediate Switches also support LTR.
See PCIe r3.1, sec 6.18.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Per PCIe r3.1, sec 5.5.1, LTR_L1.2_THRESHOLD determines whether we enter
the L1.2 Link state: if L1.2 is enabled and downstream devices have
reported that they can tolerate latency of at least LTR_L1.2_THRESHOLD, we
must enter L1.2 when CLKREQ# is de-asserted.
The implication is that LTR_L1.2_THRESHOLD is the time required to
transition the Link from L0 to L1.2 and back to L0, and per sec 5.5.3.3.1,
Figures 5-16 and 5-17, it appears that the absolute minimum time for those
transitions would be T(POWER_OFF) + T(L1.2) + T(POWER_ON) + T(COMMONMODE).
Therefore, compute LTR_L1.2_THRESHOLD as:
2us T(POWER_OFF)
+ 4us T(L1.2)
+ T(POWER_ON)
+ T(COMMONMODE)
= LTR_L1.2_THRESHOLD
Previously we set LTR_L1.2_THRESHOLD to a fixed value of 163840ns
(163.84us):
#define LTR_L1_2_THRESHOLD_BITS ((1 << 21) | (1 << 23) | (1 << 30))
((1 << 21) | (1 << 23) | (1 << 30)) = 0x40a00000
LTR_L1.2_THRESHOLD_Value = (0x40a00000 & 0x03ff0000) >> 16 = 0xa0 = 160
LTR_L1.2_THRESHOLD_Scale = (0x40a00000 & 0xe0000000) >> 29 = 0x2 (* 1024ns)
LTR_L1.2_THRESHOLD = 160 * 1024ns = 163840ns
Obviously this doesn't account for the circuit characteristics of different
implementations.
Note that while firmware may enable LTR, Linux itself currently does not
enable LTR. When L1.2 is enabled but LTR is not, LTR_L1.2_THRESHOLD is
ignored and we always enter L1.2 when it is enabled and CLKREQ# is
de-asserted. So this patch should not have any effect unless firmware
enables LTR.
Fixes: f1f0366dd6 ("PCI/ASPM: Calculate and save the L1.2 timing parameters")
Link: https://www.coreboot.org/pipermail/coreboot-gerrit/2015-March/021134.html
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Cc: Kenji Chen <kenji.chen@intel.com>
Cc: Patrick Georgi <pgeorgi@google.com>
Cc: Rajat Jain <rajatja@google.com>
PCIe correctable errors are corrected by hardware. Software may log them,
but no other software intervention is required.
There are two paths to enter the AER recovery code: (1) the native path
where Linux fields the AER interrupt and reads the AER registers directly,
and (2) the ACPI path where firmware reads the AER registers and hands them
off to Linux via the ACPI APEI path.
The AER do_recovery() function calls driver error reporting callbacks
(error_detected(), mmio_enabled(), resume(), etc), attempts recovery (for
fatal errors), and logs a "AER: Device recovery successful" message.
Since there's nothing to recover for correctable errors, the native path
already skips do_recovery(), so it doesn't call the driver callbacks and or
emit the message. Make the APEI path do the same.
Signed-off-by: Tyler Baicar <tbaicar@codeaurora.org>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
It is incorrect to call pci_restore_state() for devices in low-power
states (D1-D3), as that involves the restoration of MSI setup which
requires MMIO to be operational and that is only the case in D0.
However, pci_pm_thaw_noirq() may do that if the driver's "freeze"
callbacks put the device into a low-power state, so fix it by making
it force devices into D0 via pci_set_power_state() instead of trying
to "update" their power state which is pointless.
Fixes: e60514bd44 (PCI/PM: Restore the status of PCI devices across hibernation)
Cc: 4.13+ <stable@vger.kernel.org> # 4.13+
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Maarten Lankhorst <dev@mblankhorst.nl>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Maarten Lankhorst <dev@mblankhorst.nl>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Three sets of overlapping changes, two in the packet scheduler
and one in the meson-gxl PHY driver.
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes an issue in two recent commits that may cause
pm_runtime_enable() to be called for too many times for some
devices during the "thaw" transition belonging to hibernation.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=0D8g
-----END PGP SIGNATURE-----
Merge tag 'pm-4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"This fixes an issue in two recent commits that may cause
pm_runtime_enable() to be called for too many times for some devices
during the "thaw" transition belonging to hibernation"
* tag 'pm-4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / sleep: Avoid excess pm_runtime_enable() calls in device_resume()
Add pcim_set_mwi(), a device-managed version of pci_set_mwi().
First user is the Realtek r8169 driver.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If CONFIG_DEBUG_SLAB=y, and no PCIe card is inserted, the kernel crashes
during probe on r8a7791/koelsch:
rcar-pcie fe000000.pcie: PCIe link down
Unable to handle kernel paging request at virtual address 6b6b6b6b
(seeing this message requires earlycon and keep_bootcon).
Indeed, pci_free_host_bridge() frees the PCI host bridge, including the
embedded rcar_pcie object, so pci_free_resource_list() must not be called
afterwards.
To fix this, move the call to pci_free_resource_list() up, and update the
label name accordingly.
Fixes: ddd535f1ea ("PCI: rcar: Fix memory leak when no PCIe card is inserted")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Middle-layer code doing suspend-time optimizations for devices with
the DPM_FLAG_SMART_SUSPEND flag set (currently, the PCI bus type and
the ACPI PM domain) needs to make the core skip ->thaw_early and
->thaw callbacks for those devices in some cases and it sets the
power.direct_complete flag for them for this purpose.
However, it turns out that setting power.direct_complete outside of
the PM core is a bad idea as it triggers an excess invocation of
pm_runtime_enable() in device_resume().
For this reason, provide a helper to clear power.is_late_suspended
and power.is_suspended to be invoked by the middle-layer code in
question instead of setting power.direct_complete and make that code
call the new helper.
Fixes: c4b65157ae (PCI / PM: Take SMART_SUSPEND driver flag into account)
Fixes: 05087360fd (ACPI / PM: Take SMART_SUSPEND driver flag into account)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Add a pci_vf_drivers_autoprobe() interface. Setting autoprobe to false
on the PF prevents drivers from binding to VFs when they are enabled.
Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com>
Signed-off-by: Juan J. Alvarez <jjalvare@linux.vnet.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add support for DPM_FLAG_LEAVE_SUSPENDED to the PCI bus type by
making it (a) set the power.may_skip_resume status bit for devices
that, from its perspective, may be left in suspend after system
wakeup from sleep and (b) return early from pci_pm_resume_noirq()
for devices whose remaining resume callbacks during the transition
under way are going to be skipped by the PM core.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Pull misc x86 fixes from Ingo Molnar:
- topology enumeration fixes
- KASAN fix
- two entry fixes (not yet the big series related to KASLR)
- remove obsolete code
- instruction decoder fix
- better /dev/mem sanity checks, hopefully working better this time
- pkeys fixes
- two ACPI fixes
- 5-level paging related fixes
- UMIP fixes that should make application visible faults more debuggable
- boot fix for weird virtualization environment
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86/decoder: Add new TEST instruction pattern
x86/PCI: Remove unused HyperTransport interrupt support
x86/umip: Fix insn_get_code_seg_params()'s return value
x86/boot/KASLR: Remove unused variable
x86/entry/64: Add missing irqflags tracing to native_load_gs_index()
x86/mm/kasan: Don't use vmemmap_populate() to initialize shadow
x86/entry/64: Fix entry_SYSCALL_64_after_hwframe() IRQ tracing
x86/pkeys/selftests: Fix protection keys write() warning
x86/pkeys/selftests: Rename 'si_pkey' to 'siginfo_pkey'
x86/mpx/selftests: Fix up weird arrays
x86/pkeys: Update documentation about availability
x86/umip: Print a warning into the syslog if UMIP-protected instructions are used
x86/smpboot: Fix __max_logical_packages estimate
x86/topology: Avoid wasting 128k for package id array
perf/x86/intel/uncore: Cache logical pkg id in uncore driver
x86/acpi: Reduce code duplication in mp_override_legacy_irq()
x86/acpi: Handle SCI interrupts above legacy space gracefully
x86/boot: Fix boot failure when SMP MP-table is based at 0
x86/mm: Limit mmap() of /dev/mem to valid physical addresses
x86/selftests: Add test for mapping placement for 5-level paging
...
There are no in-tree callers of ht_create_irq(), the driver interface for
HyperTransport interrupts, left. Remove the unused entry point and all the
supporting code.
See 8b955b0ddd ("[PATCH] Initial generic hypertransport interrupt
support").
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-pci@vger.kernel.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Link: https://lkml.kernel.org/r/20171122221337.3877.23362.stgit@bhelgaas-glaptop.roam.corp.google.com
bug fixes.
-----BEGIN PGP SIGNATURE-----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=svG8
-----END PGP SIGNATURE-----
Merge tag 'ntb-4.15' of git://github.com/jonmason/ntb
Pull ntb updates from Jon Mason:
"Support for the switchtec ntb and related changes. Also, a couple of
bug fixes"
[ The timing isn't great. I had asked people to send me pull requests
before my family vacation, and this code has not even been in
linux-next as far as I can tell. But Logan Gunthorpe pleaded for its
inclusion because the Switchtec driver has apparently been around for
a while, just never in linux-next - Linus ]
* tag 'ntb-4.15' of git://github.com/jonmason/ntb:
ntb: intel: remove b2b memory window workaround for Skylake NTB
NTB: make idt_89hpes_cfg const
NTB: switchtec_ntb: Update switchtec documentation with notes for NTB
NTB: switchtec_ntb: Add memory window support
NTB: switchtec_ntb: Implement scratchpad registers
NTB: switchtec_ntb: Implement doorbell registers
NTB: switchtec_ntb: Add link management
NTB: switchtec_ntb: Add skeleton NTB driver
NTB: switchtec_ntb: Initialize hardware for doorbells and messages
NTB: switchtec_ntb: Initialize hardware for memory windows
NTB: switchtec_ntb: Introduce initial NTB driver
NTB: Add check and comment for link up to mw_count() and mw_get_align()
NTB: Ensure ntb_mw_get_align() is only called when the link is up
NTB: switchtec: Add link event notifier callback
NTB: switchtec: Add NTB hardware register definitions
NTB: switchtec: Export class symbol for use in upper layer driver
NTB: switchtec: Move structure definitions into a common header
ntb: update maintainer list for Intel NTB driver
Seeing the Switchtec NTB hardware shares the same endpoint as the
management endpoint we utilize the class_interface API to register
an NTB driver for every Switchtec device in the system that has the
NTB class code.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Bates <sbates@raithlin.com>
Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com>
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
In order for the Switchtec NTB code to handle link change events we
create a notifier callback in the switchtec code which gets called
whenever an appropriate event interrupt occurs.
In order to preserve userspace's ability to follow these events,
we compare the event count with a stored copy from last time we
checked.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Bates <sbates@raithlin.com>
Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
We export the class pointer symbol and add an extern define in the
Switchtec header file.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Stephen Bates <sbates@raithlin.com>
Reviewed-by: Kurt Schwemmer <kurt.schwemmer@microsemi.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Niklas Cassel