This moves the generic tracking into the drivers and protects
against reentrancy in the drivers. It fixes up radeon and agp
to be able to query the bound status as that is required.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917043040.146575-2-airlied@gmail.com
Unexport ttm_check_under_lowerlimit.
Make ttm_bo_acc_size static and unexport it.
Remove ttm_get_kernel_zone_memory_size.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/390515/
This change simplifies ast's modesetting code. The display mode
is now programmed from within the CRTC's atomic_enable(), which
only runs if we actually want to program the mode.
Corresponding code in atomic_flush() is being removed. Also removed
is atomic_begin(), which serves no purpose at all.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200914072236.19398-4-tzimmermann@suse.de
The ast HW cursor requires the primary plane and CRTC to display at
a valid mode and format. This is not the case while switching
display modes, which can lead to the screen turing permanently dark.
As a workaround, the ast driver now disables active planes while the
mode or format switch takes place. It also synchronizes with the vertical
refresh to give CRTC and planes some time to catch up on each other.
The active planes planes (primary or cursor) will be re-enabled by
each plane's atomic_update() function.
v3:
* move the logic into the CRTC's atomic_disable function
v2:
* move the logic into the commit-tail function
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200914072236.19398-3-tzimmermann@suse.de
The atomic modesetting code tried to distinguish format changes from
full modesetting operations. But the implementation was buggy and the
format registers were often updated even for simple pageflips.
Fix this problem by handling format changes in the primary plane's
update function.
v3:
* program format in primary plane's update function
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200914072236.19398-2-tzimmermann@suse.de
The lcdif IP does not support a framebuffer pitch (stride) other than
framebuffer width. Check for equality and reject the framebuffer
otherwise.
This prevents a distorted picture when using 640x800 and running the
Mesa graphics stack. Mesa tries to use a cache aligned stride, which
leads at that particular resolution to width != stride. Currently
Mesa has no fallback behavior, but rejecting this configuration allows
userspace to handle the issue correctly.
Fixes: 45d59d7040 ("drm: Add new driver for MXSFB controller")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200908141654.266836-1-stefan@agner.ch
Handing the return value of drm_universal_plane_init to fix the following
W=1 kernel build warning(s):
vc4_plane.c: In function ‘vc4_plane_init’:
vc4_plane.c:1340:6: warning: variable ‘ret’ set but not
used [-Wunused-but-set-variable]
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1599811777-34093-1-git-send-email-tiantao6@hisilicon.com
Move bound up into the bo object, and keep populated with the tt
object.
The ghost object handling needs to follow the flags at the bo
level now instead of it being part of the ttm tt object.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915024007.67163-7-airlied@gmail.com
This adds 2 getters and 4 setters, however unbound and populated
are currently the same thing, this will change, it also drops
a BUG_ON that seems not that useful.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915024007.67163-2-airlied@gmail.com
Instead of letting TTM make an educated guess based on
some mask all drivers should just specify what caching
they want for their CPU mappings.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/390207/
Instead of letting TTM masking the caching bits
specify directly what the driver needs.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/390206
As far as I can tell this was never used either and we just
always fallback to the order cached > wc > uncached anyway.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/390142/
The get_edid() callback can be triggered anytime by an ioctl, i.e
drm_mode_getconnector (ioctl)
-> drm_helper_probe_single_connector_modes
-> drm_bridge_connector_get_modes
-> ps8640_bridge_get_edid
Actually if the bridge pre_enable() function was not called before
get_edid(), the driver will not be able to get the EDID properly and
display will not work until a second get_edid() call is issued and if
pre_enable() is called before. The side effect of this, for example, is
that you see anything when `Frecon` starts, neither the splash screen,
until the graphical session manager starts.
To fix this we need to make sure that all we need is enabled before
reading the EDID. This means the following:
1. If get_edid() is called before having the device powered we need to
power on the device. In such case, the driver will power off again the
device.
2. If get_edid() is called after having the device powered, all should
just work. We added a powered flag in order to avoid recurrent calls
to ps8640_bridge_poweron() and unneeded delays.
3. This seems to be specific for this device, but we need to make sure
the panel is powered on before do a power on cycle on this device.
Otherwise the device fails to retrieve the EDID.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Bilal Wasim <bwasim.lkml@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200827085911.944899-2-enric.balletbo@collabora.com
Usually we wait for the host to complete the unref request, then cleanup
the guest-side state of the object in the completion callback. When
submitting the unref command failed the completion callback will not be
called though, so cleanup right away.
Fixes a WARN on stale mm entries on driver shutdown.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20200908070723.6394-4-kraxel@redhat.com
Ingenic SoCs are most notably used in cheap chinese handheld gaming
consoles. There, the games and applications generally render in software
directly into GEM buffers.
Traditionally, GEM buffers are mapped write-combine. Writes to the
buffer are accelerated, and reads are slow. Application doing lots of
alpha-blending paint inside shadow buffers, which is then memcpy'd into
the final GEM buffer.
On recent Ingenic SoCs however, it is much faster to have a fully cached
GEM buffer, in which applications paint directly, and whose data is
invalidated before scanout, than having a write-combine GEM buffer, even
when alpha blending is not used.
Add an optional 'cached_gem_buffers' parameter to the ingenic-drm driver
to allow GEM buffers to be mapped fully-cached, in order to speed up
software rendering.
v2: Use standard noncoherent DMA APIs
v3: Use damage clips instead of invalidating full frames
v4: Avoid dma_pgprot() which is not exported. Using vm_get_page_prot()
is enough in this case.
v5:
- Avoid calling drm_gem_cma_prime_mmap(). It has the side effect that an
extra object reference is obtained, which causes our dumb buffers to
never be freed. It should have been drm_gem_cma_mmap_obj(). However,
our custom mmap function only differs with one flag, so we can cleanly
handle both modes in ingenic_drm_gem_mmap().
- Call drm_gem_vm_close() if drm_mmap_attrs() failed, just like in
drm_gem_cma_mmap_obj().
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200912195639.176001-1-paul@crapouillou.net
We update the timestamping constants per-crtc explicitly in
intel_crtc_update_active_timings(). Furtermore the helper will
use uapi.adjusted_mode whereas we want hw.adjusted_mode. Thus
let's drop the helper call an rely on what we already have in
intel_crtc_update_active_timings(). We can now also drop the
hw.adjusted_mode -> uapi.adjusted_mode copy hack that was added
to keep the helper from deriving the timestamping constants from
the wrong thing.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200907120026.6360-3-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The timestamping constants have nothing to do with any legacy state
so should not be updated from
drm_atomic_helper_update_legacy_modeset_state().
Let's make everyone call drm_atomic_helper_calc_timestamping_constants()
directly instead of relying on
drm_atomic_helper_update_legacy_modeset_state() to call it.
@@
expression S;
@@
- drm_atomic_helper_calc_timestamping_constants(S);
@@
expression D, S;
@@
drm_atomic_helper_update_legacy_modeset_state(D, S);
+ drm_atomic_helper_calc_timestamping_constants(S);
v2: Update drm_crtc_vblank_helper_get_vblank_timestamp{,_internal}() docs (Daniel)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200907120026.6360-2-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Put the vblank timestamping constants update loop into its own
function. It has no business living inside
drm_atomic_helper_update_legacy_modeset_state() so we'll be wanting
to move it out entirely. As a first step we'll still call it
from drm_atomic_helper_update_legacy_modeset_state().
v2: Drop comment about 'legacy state' in the new function
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200907120026.6360-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl9epdgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG9IMH/jHCRSbcsIXHuQHn
xcRLlhrDHfXoBza7auHfPWx2+9DZsmaSJs/SEiTGNag0Bi7jBcWcwBpsep7iVG/+
WiftD5uOMhZigyuvfMFrt0mjr2Kr3wg5p58lwMBeBdm8iL5uKV8ehKsh05/Fral2
6hu3jP8L0PCZMpF+sZ7s2jlhfVUMmjA8VzXZCvgQtmhoraHiF3mzfkcSMxnHwBPO
HLo+TDDm49u+LbVsJT7+cSTiWxuUJCbix9Q4PCTx/BGg4ezYsjc6v0BnYRaYtrrA
1uYiT6PVBEUkYYBHKQlD3N2KnUmbKx7dGUF4t+peTg5/JiocAJMNi1N9Qzvv7N6Q
CqTiuio=
=q+kJ
-----END PGP SIGNATURE-----
Merge v5.9-rc5 into drm-next
Paul needs 1a21e5b930 ("drm/ingenic: Fix leak of device_node
pointer") and 3b5b005ef7 ("drm/ingenic: Fix driver not probing when
IPU port is missing") from -fixes to be able to merge further ingenic
patches into -next.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
VRAM helpers support ref counting for pin and vmap operations, no need
to avoid these operations by employing the internal kmap interface. Just
use drm_gem_vram_vmap() and let it handle the details.
Also unexport the kmap interfaces from VRAM helpers. Vboxvideo was the
last user of these internal functions.
v2:
* fixed a comma in commit description
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200911075922.19317-1-tzimmermann@suse.de
This addresses the following gcc warning with "make W=1":
drivers/gpu/drm/xlnx/zynqmp_disp.c:245:18: warning:
‘scaling_factors_666’ defined but not used [-Wunused-const-variable=]
245 | static const u32 scaling_factors_666[] = {
| ^~~~~~~~~~~~~~~~~~~
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200910140630.1191782-1-yanaijie@huawei.com
kmemdup can be used instead of kmalloc+memcpy. Replace an occurrence of
this pattern.
Issue identified with Coccinelle.
Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200909190213.156302-1-alex.dewar90@gmail.com
It's not supported to specify more than one of those flags.
So it never made sense to make this a flag in the first place.
Nuke the flags and specify directly which memory type to use.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/389826/?series=81551&rev=1
Those are going to be removed, stop using them here.
Instead use the GEM flags from the UAPI.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/389825/?series=81551&rev=1
Those are going to be removed, stop using them here.
Instead define separate flags for the helper.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/389823/?series=81551&rev=1
Clang warns:
drivers/gpu/drm/vc4/vc4_plane.c:901:27: warning: operator '?:' has lower
precedence than '|'; '|' will be evaluated first
[-Wbitwise-conditional-parentheses]
fb->format->has_alpha ?
~~~~~~~~~~~~~~~~~~~~~ ^
drivers/gpu/drm/vc4/vc4_plane.c:901:27: note: place parentheses around
the '|' expression to silence this warning
fb->format->has_alpha ?
~~~~~~~~~~~~~~~~~~~~~ ^
drivers/gpu/drm/vc4/vc4_plane.c:901:27: note: place parentheses around
the '?:' expression to evaluate it first
fb->format->has_alpha ?
~~~~~~~~~~~~~~~~~~~~~~^
1 warning generated.
Add the parentheses as that was clearly intended, otherwise
SCALER5_CTL2_ALPHA_PREMULT won't be added to the list.
Fixes: c54619b0bf ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1150
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200910171831.4112580-1-natechancellor@gmail.com
Clang warns 100+ times in the vc4 driver along the lines of:
drivers/gpu/drm/vc4/vc4_hdmi_phy.c:518:13: warning: implicit conversion
from enumeration type 'enum vc4_hdmi_field' to different enumeration
type 'enum vc4_hdmi_regs' [-Wenum-conversion]
HDMI_WRITE(HDMI_TX_PHY_POWERDOWN_CTL,
~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
The HDMI_READ and HDMI_WRITE macros pass in enumerators of type
vc4_hdmi_field but vc4_hdmi_write and vc4_hdmi_read expect a enumerator
of type vc4_hdmi_regs, causing a warning for every instance of this.
Update the parameter type so there is no more mismatch.
Fixes: 311e305fdb ("drm/vc4: hdmi: Implement a register layout abstraction")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1149
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200910170401.3857250-1-natechancellor@gmail.com
This function always return '0' and no callers use the return value. So
make it a void function.
This eliminates the following coccicheck warning:
drivers/gpu/drm/i810/i810_dma.c:860:8-11: Unneeded variable: "ret".
Return "0" on line 885
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200910140610.1191578-1-yanaijie@huawei.com
Gets rid of drmm_add_final_kfree, which I want to unexport so that it
stops confusion people about this transitional state of rolling drm
managed memory out.
This also fixes the missing drm_dev_put in the error path of the probe
code.
v2: Drop the misplaced drm_dev_put from zynqmp_dpsub_drm_init (all
other paths leaked on error, this should have been in
zynqmp_dpsub_probe), now that subsumed by the auto-cleanup of
devm_drm_dev_alloc.
Reviewed-by: Hyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Hyun Kwon <hyun.kwon@xilinx.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200907082225.150837-1-daniel.vetter@ffwll.ch
This means we also need to slightly restructure the exit code, so that
final cleanup of the drm_device is triggered by unregistering the
platform device. Note that devres is both clean up when the driver is
unbound (not the case for vkms, we don't bind), and also when unregistering
the device (very much the case for vkms). Therefore we can rely on devres
even though vkms isn't a proper platform device driver.
This also somewhat untangles the load code, since the drm and platform device
setup are no longer interleaved, but two distinct steps.
v2: use devres_open/release_group so we can use devm without real
hacks in the driver core or having to create an entire fake bus for
testing drivers. Might want to extract this into helpers eventually,
maybe as a mock_drm_dev_alloc or test_drm_dev_alloc.
v3: Only deref vkms_device after checking it (Melissa)
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Cc: Melissa Wen <melissa.srw@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200909091833.440548-1-daniel.vetter@ffwll.ch
This means we also need to slightly restructure the exit code, so that
final cleanup of the drm_device is triggered by unregistering the
platform device. Note that devres is both clean up when the driver is
unbound (not the case for vgem, we don't bind), and also when unregistering
the device (very much the case for vgem). Therefore we can rely on devres
even though vgem isn't a proper platform device driver.
This also somewhat untangles the load code, since the drm and platform device
setup are no longer interleaved, but two distinct steps.
v2: use devres_open/release_group so we can use devm without real
hacks in the driver core or having to create an entire fake bus for
testing drivers. Might want to extract this into helpers eventually,
maybe as a mock_drm_dev_alloc or test_drm_dev_alloc.
v3: Fix error code handling (Melissa)
Cc: Melissa Wen <melissa.srw@gmail.com>
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Rob Clark <robdclark@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200909120745.716178-1-daniel.vetter@ffwll.ch
Also remove the now no longer needed build bug on since that's already
not needed anymore with drmm_add_final_kfree. Conversion to managed
drm_device cleanup is easy, the final drm_dev_put() is already the
last thing in both the bind unbind as in the unbind flow.
Also, this relies on component.c correctly wrapping bind&unbind in
separate devres groups, which it does.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200904143941.110665-2-daniel.vetter@ffwll.ch
- Fix double free in virtio.
- Add missing put_device in sun4i, and other fixes.
- Small ingenic fixes.
- Handle sun4i alpha on lowest plane correctly.
- Remove output->enabled from virtio, as it should use crtc_state.
- Fix tve200 enable/disable.
- Documentation fix.
- Fix virtio unblank.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAl9Y6koACgkQ/lWMcqZw
E8P5CxAAvH5B60s23LQdi7JWgWY4r560jneCtBtnesOKMan3ckVHZSX1XEsvvodQ
Ihvm8EriajcYDTOSCgXg5CitPpFDD3WaxUPWZ5VNiLnQInncbP0+Scz147/bVyHo
1XoPyLqqjCrUcHEQSxYGZfFtJPEpm4CoRgqHDQk0QAdYtopgLf1ff6Z2gYGUC7kD
8nIOVakRdDlRlhQYIy9AzznUTPJvN4vm0cLmJS4xDlVpVJcLI7X9qiMEF1OsZvhw
x6sH+3uttbQRzMJqARyANbMc0VD3osqwzTnHHehu6xGI03MLZW2NC6+LpQEe2zK1
AST/H8si7OpemXCyztevkqeDXj6jOBNgnIlr5gv2rUSK5Iva7ZKj4P/2xxr6qm4E
7Ip1Qa1WXMMJJiFGddcYZ2fjEpWUPGAmigtZtwVebugmqSgWigphengqhDZb3gMM
IsVABfbAM0DZcV8iVeHYDq5OJmdOD+/qzAKOayaj4Sgq5G7LokkkIuYhtU7i28rQ
Bl8vCR0VprxdyfKweS98PLBpbgo4oSh20zRTqvLtiNbVWZoVhTdladd9hlL2IChg
cx5bOf7fkboX1hTy7vdU16BIuGzEFc38XgexXDYJuvvy/T+GvYDUtw4HL1vJwT79
/Ef6psjt6EqVE4JfTYvwv54Hbz4PrvLRUngZK/vzkzefDygw9Sc=
=pqMB
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2020-09-09' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v5.9-rc5:
- Fix double free in virtio.
- Add missing put_device in sun4i, and other fixes.
- Small ingenic fixes.
- Handle sun4i alpha on lowest plane correctly.
- Remove output->enabled from virtio, as it should use crtc_state.
- Fix tve200 enable/disable.
- Documentation fix.
- Fix virtio unblank.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/478b49d1-b1b3-c983-7056-8a89249be435@mblankhorst.nl
This function should be an int, not a bool.
Presumably because we had the same 2 reverts in a slightly different
way, git got confused.
Thanks to Dan for reporting. :)
The conflict is between the 3 reverts in drm-fixes:
4993a8a378 ("Revert "drm/i915: Remove i915_gem_object_get_dirty_page()"")
ad5d95e4d5 ("Revert "drm/i915/gem: Async GPU relocations only"")
20561da3a2 ("Revert "drm/i915/gem: Delete unused code"")
And the slightly different combined revert in drm-intel-gt-next, but
with the same goal:
102a0a9051 ("Revert "drm/i915/gem: Async GPU relocations only"")
In the merge commit 1f4b2aca79 ("Merge tag
'drm-intel-gt-next-2020-09-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-next") things
went wrong, but the merge commit view now doesn't show any conflict
anymore (as git tends to do when the resolution picks one or the other
branch).
The need to handle other than just true/false error codes in
__reloc_entry_gpu was added in the dma_resv locking changes in
c43ce12328 ("drm/i915: Use per object locking in execbuf, v12.")
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Dave Airlie <airlied@redhat.com>
[danvet: Explain this entire saga a lot better, adding tons of commit
references. Also note that this was merged before full intel-gfx-CI
results, only after BAT, since the breakage at the BAT run is already
severe enough to block all pre-merge testing.]
Fixes: 1f4b2aca79 ("Merge tag 'drm-intel-gt-next-2020-09-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-next")
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200910111225.2184193-1-maarten.lankhorst@linux.intel.com
The GPU 'CONFIG' registers used to work around hardware issues are
cleared on reset so need to be programmed every time the GPU is reset.
However panfrost_device_reset() failed to do this.
To avoid this in future instead move the call to
panfrost_gpu_init_quirks() to panfrost_gpu_power_on() so that the
regsiters are always programmed just before the cores are powered.
Fixes: f3ba91228e ("drm/panfrost: Add initial panfrost driver")
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200909122957.51667-1-steven.price@arm.com
Dave Airlie