function: get current DP PHY settings: voltage swing, pre-emphasis,
post-cursor2 (defined by VESA DP specification)
valid values: voltage swing: 0,1,2,3 pre-emphasis : 0,1,2,3
post cursor2 : 0,1,2,3
debugfs file phy_setings is located at /sys/kernel/debug/dri/0/DP-x
there will be directories, like DP-1, DP-2,DP-3, etc. for DP display
--- to figure out which DP-x is the display for DP to be check,
cd DP-x
ls -ll
There should be debugfs file, like link_settings, phy_settings.
cat link_settings
from lane_count, link_rate to figure which DP-x is for display to be
worked on
--- to get current DP PHY settings,
cat phy_settings
--- to change DP PHY settings,
echo <voltage_swing> <pre-emphasis> <post_cursor2> > phy_settings
for examle, to change voltage swing to 2, pre-emphasis to 3,
post_cursor2 to 0,
echo 2 3 0 > phy_settings
--- to check if change be applied, get current phy settings by
cat phy_settings
--- in case invalid values are set by user, like
echo 1 4 0 > phy_settings
HW will NOT be programmed by these settings.
cat phy_settings will show the previous valid settings.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
In eDP spec, the min duration in LCDVDD on-off-on sequence should be
500ms, some BOE panels need 700ms to pass.
[HOW]
Add patch to wait more time when eDP power on.
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
set PHY layer or Link layer test pattern
PHY test pattern is used for PHY SI check.
Link layer test will not affect PHY SI.
- normal video mode
0 = DP_TEST_PATTERN_VIDEO_MODE
- PHY test pattern supported
1 = DP_TEST_PATTERN_D102
2 = DP_TEST_PATTERN_SYMBOL_ERROR
3 = DP_TEST_PATTERN_PRBS7
4 = DP_TEST_PATTERN_80BIT_CUSTOM
5 = DP_TEST_PATTERN_CP2520_1
6 = DP_TEST_PATTERN_CP2520_2 = DP_TEST_PATTERN_HBR2_COMPLIANCE_EYE
7 = DP_TEST_PATTERN_CP2520_3
- DP PHY Link Training Patterns
8 = DP_TEST_PATTERN_TRAINING_PATTERN1
9 = DP_TEST_PATTERN_TRAINING_PATTERN2
0xa = DP_TEST_PATTERN_TRAINING_PATTERN3
0xb = DP_TEST_PATTERN_TRAINING_PATTERN4
- DP Link Layer Test pattern
0xc = DP_TEST_PATTERN_COLOR_SQUARES
0xd = DP_TEST_PATTERN_COLOR_SQUARES_CEA
0xe = DP_TEST_PATTERN_VERTICAL_BARS
0xf = DP_TEST_PATTERN_HORIZONTAL_BARS
0x10= DP_TEST_PATTERN_COLOR_RAMP
debugfs phy_test_pattern is located at /syskernel/debug/dri/0/DP-x
--- set test pattern
echo <test pattern #> > test_pattern
- custom test pattern
If test pattern # is not supported, NO HW programming will be done
for DP_TEST_PATTERN_80BIT_CUSTOM, it needs extra 10 bytes of data
for the user pattern. input 10 bytes data are separated by space
echo 0x4 0x11 0x22 0x33 0x44 0x55 0x66 0x77 0x88 0x99 0xaa >
test_pattern
--- reset test pattern
echo 0 > test_pattern
--- HPD detection is disabled when set PHY test pattern
when PHY test pattern (pattern # within [1,7]) is set, HPD pin of
HW ASIC is disable. User could unplug DP display from DP connected
and plug scope to check test pattern PHY SI.
If there is need unplug scope and plug DP display back, do steps
below:
echo 0 > phy_test_pattern
unplug scope
plug DP display.
"echo 0 > phy_test_pattern" will re-enable HPD pin again so that
video sw driver could detect "unplug scope" and "plug DP display"
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- define new dpcd address in drm
- implement new members in dpcd_caps to store values read from new dpcd address
Signed-off-by: Alvin lee <alvin.lee3@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Removed dal/dm/dc loggers from linux, switched to kernel prints
- Modified functions that used these directly to use macros
- dc_logger support is completely dropped from Linux
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently we still go through DC code that does error checking, retries,
etc. There's no need for that since DRM already does that for us. This
simplifies the code a bit and makes it easier to debug.
This also ensures we correctly tell DRM how many bytes have actually
been read, as we should. This allows DRM to correctly read the EDID on
the Chamelium DP port.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DRM's DP helpers take care of dealing with the error code for us. In
order not to step on each other's toes we'll need to be able to simply
read auch channel replies without further logic based on return values.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Access to GPIO needs to be serialized. Aux transactions are already
serialized in DRM but we also need to serialize access to the GPIO pin
for purposes of DP dongle detection.
Call is_dp_sink_present through DM so we can lock correctly. This
follows the same pattern used for DPCD transactions.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
function description
get/ set DP configuration: lane_count, link_rate, spread_spectrum
valid lane count value: 1, 2, 4
valid link rate value:
06h = 1.62Gbps per lane
0Ah = 2.7Gbps per lane
0Ch = 3.24Gbps per lane
14h = 5.4Gbps per lane
1Eh = 8.1Gbps per lane
debugfs is located at /sys/kernel/debug/dri/0/DP-x/link_settings
--- to get dp configuration
xxd -l 300 phy_settings
It will list current, verified, reported, preferred dp configuration.
current -- for current video mode
verified --- maximum configuration which pass link training
reported --- DP rx report caps (DPCD register offset 0, 1 2)
preferred --- user force settings
--- set (or force) dp configuration
echo <lane_count> <link_rate>
for example, to force to 2 lane, 2.7GHz,
echo 4 0xa > link_settings
spread_spectrum could not be changed dynamically.
in case invalid lane count, link rate are force, no hw programming will be
done. please check link settings after force operation to see if HW get
programming.
xxd -l 300 link_settings
check current and preferred settings.
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
in case we have very few pins in the table, check fails and we can't boot
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add generic indirect register access following our register access pattern
this will make it easier to review code and programming sequence,
with all the complexity hidden in macro
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
we were using 6 instances based on i2caux_dce110.c
[HOW]
pass in how many instances to ctor
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
expose dc function to be called by linux dm
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Megachip dockings accesses ddc line through display driver when
installing FW. Previously, we would fail every transaction because
link attached to mst branch did not have their ddc transaction type
set.
[How]
Set ddc transaction type when mst branch is connected.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Separate HUBP surface size and rotation/mirror programming so that
HUBP revision without mirror/rotation do not access those register
fields.
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit cc19514113.
This commit was problematic on other OSes. The real solution is to
leave all the error checking to DRM and don't do it in DC, which is
addressed by "Return aux replies directly to DRM" later in this patchset.
v2: Add reason for revert.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 8a61bc085f.
Need to revert "make dm_dp_aux_transfer return payload bytes instead of
size", which this commit is based on. That commit was problematic on
other OSes. The real solution is to leave all the error checking to DRM
and don't do it in DC, which is addressed by "Return aux replies
directly to DRM" later in this patchset.
v2: Add reason for revert.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This shouldn't happen, but if it does, we'll get a backtrace of the
caller, and update the pin_size values as needed.
v2:
* Check bo->pin_count instead of placement flags (Christian König)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Concurrent execution of the non-atomic arithmetic could result in
completely bogus values.
v2:
* Rebased on v2 of the previous patch
Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/106872
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of CPU invisible VRAM. Preparation for the following, no
functional change intended.
v2:
* Also change amdgpu_vram_mgr_bo_invisible_size to
amdgpu_vram_mgr_bo_visible_size, allowing further simplification
(Christian König)
Cc: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
replace run queue by a list of run queues and remove the
sched arg as that is part of run queue itself
Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is in preparation for a better load balancing in
scheduler. It allows us to associate entities with the
run queues instead of binding them to a scheduler.
Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are initializing the entity before the scheduler is actually
initialized.
This can lead to all kind of problem, but especially NULL pointer deref
because of Nayan's scheduler work.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stop using 'magic numbers' when registering interrupt sources.
v2: Switch to kernel style comments.
v3:
Rebase.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: Rebase
v3: Use defines for CP_SQ and CP_ECC_ERROR interrupts.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Convert the clocks into right Mhz unit. Otherwise, it will miss
the equal situation.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Gfxoff feature for vega12 is workable. So, there is no need to
mask it any more.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Export apis for enabling/disabling SMU gfxoff support.
v2: fit the latest gfxoff support framework
v3: add feature_mask control
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang at amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Gfxoff feature may depends on the CGCG(on vega12, that's the case). This
change will help to enable gfxoff feature more frequently.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On vega12, the bit0 of RLC_CGTT_MGCG_OVERRIDE is reserved.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SMU owns this register so the driver should not set it
to avoid breaking gfxoff.
v2: update description
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher at amd.com>
Reviewed-by: Huang Rui <ray.huang at amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The save restore list initialization does not have to be pg guarded.
And for some asic(e.g. Vega12), it does not have cntl/gpm/srm lists.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CSIB init has no relation with rlc version and pg status. It should be
needed regardless of them.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Without this pin, the csb buffer will be filled with inconsistent
data after S3 resume. And that will causes gfx hang on gfxoff
exit since this csb will be executed then.
v2: fit amdgpu_bo_pin change(take one less argument)
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since there's very few callers of these I've decided to do them all in
one patch. With this the unecessarily long drm_mode_connector_ prefix
is gone from the codebase! The only exception being struct
drm_mode_connector_set_property, which is part of the uapi so can't be
renamed.
Again done with sed+some manual fixups for indent issues.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-8-daniel.vetter@ffwll.ch
We're doing a pointless translation from hpd_pin to port simply for
passing the thing to long_pulse_detect(). Let's pass the hpd_pin
directly instead.
This removes the assumption that the hpd_pin and port always
match. The only other place where we make that assumption anymore
is intel_hpd_pin_default() and that's fine as it's what determines
the relationship between the two. If we ever get hardware where
the hpd pins are wired in more interesting ways it should be
trivial to handle from now on.
This should also fix the IS_CNL_WITH_PORT_F() case as that mapped
pin E back to port F and passed that to
spt_port_hotplug2_long_detect() which would always return false
for port F. Now that we pass in pin E directly it'll actually
do the right thing.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fixes: cf53902f48 ("drm/i915/cnl: Add HPD support for Port F.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705164357.28512-7-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Instead of looping over ports and hpd_pins, let's loop over
the encoders when doing hotplug processing. And instead of
depending on dev_priv->irq_port[] to tell us whether the
encoder has the ->hpd_pulse() hook or not, we can just
check for that directly. So we can just nuke irq_port[] entirely.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705164357.28512-5-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Rather than looping over all the ports and picking the encoder based on
the port, let's just loop over all the encoders instead. Gets rid of
some irq_port[] usage, which is a bit of an eye sore.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705164357.28512-4-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
On gen8 and onwards, we can mark GPU accesses through the ppGTT as being
read-only, that is cause any GPU write onto that page to be discarded
(not triggering a fault). This is all that we need to finally support
the read-only flag for userptr!
v2: Check default address space for read only support as a proxy for the
user context/ppgtt.
Testcase: igt/gem_userptr_blits/readonly*
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712191430.9269-1-chris@chris-wilson.co.uk
If the user created a read-only object, they should not be allowed to
circumvent the write protection using the pwrite ioctl.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712185315.3288-5-chris@chris-wilson.co.uk
If the user has created a read-only object, they should not be allowed
to circumvent the write protection by using a GGTT mmapping. Deny it.
Also most machines do not support read-only GGTT PTEs, so again we have
to reject attempted writes. Fortunately, this is known a priori, so we
can at least reject in the call to create the mmap (with a sanity check
in the fault handler).
v2: Check the vma->vm_flags during mmap() to allow readonly access.
v3: Remove VM_MAYWRITE to curtail mprotect()
Testcase: igt/gem_userptr_blits/readonly_mmap*
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com> #v1
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712185315.3288-4-chris@chris-wilson.co.uk
GVT is not propagating the PTE bits, and is always setting the
read-write bit, thus breaking read-only support.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712185315.3288-3-chris@chris-wilson.co.uk
Hook up the flags to allow read-only ppGTT mappings for gen8+
v2: Include a selftest to check that writes to a readonly PTE are
dropped
v3: Don't duplicate cpu_check() as we can just reuse it, and even worse
don't wholesale copy the theory-of-operation comment from igt_ctx_exec
without changing it to explain the intention behind the new test!
v4: Joonas really likes magic mystery values
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712185315.3288-2-chris@chris-wilson.co.uk
We can set a bit inside the ppGTT PTE to indicate a page is read-only;
writes from the GPU will be discarded. We can use this to protect pages
and in particular support read-only userptr mappings (necessary for
importing PROT_READ vma).
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712185315.3288-1-chris@chris-wilson.co.uk
Everything (apart from the actual ->set_config() call)
__drm_mode_set_config_internal() does is now useless on
atomic drivers. So let's just skip all the foreplay.
v2: Use drm_drv_uses_atomic_modeset() (Daniel)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705190010.19836-1-ville.syrjala@linux.intel.com
All the plane->fb/old_fb/crtc dance of __setplane_internal() is
pointless on atomic drivers. So let's just introduce a simpler
version that skips all that.
Ideally we could also skip the __setplane_check() as
drm_atomic_plane_check() already checks for everything, but the
legacy cursor/"async" .update_plane() tricks bypass that so
we still need to call __setplane_check(). Toss in a FIXME to
remind someone to clean this up later.
v2: Use drm_drv_uses_atomic_modeset() (Daniel)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705185907.9524-1-ville.syrjala@linux.intel.com
This adds support for the DisplayPort CEC-Tunneling-over-AUX
feature that is part of the DisplayPort 1.3 standard.
Unfortunately, not all DisplayPort/USB-C to HDMI adapters with a
chip that has this capability actually hook up the CEC pin, so
even though a CEC device is created, it may not actually work.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180711132909.25409-2-hverkuil@xs4all.nl
On GLK NUC platforms the HDMI retiming buffer needs additional disabled
time to correctly sync to a faster incoming signal.
When measured on a scope the highspeed lines of the HDMI clock turn off
for ~400uS during a normal resolution change. The HDMI retimer on the
GLK NUC appears to require at least a full frame of quiet time before a
new faster clock can be correctly sync'd. Wait 100ms due to msleep
inaccuracies while waiting for a completed frame. Add a quirk to the
driver for GLK boards that use ITE66317 HDMI retimers.
V2: Add more devices to the quirk list
V3: Delay increased to 100ms, check to confirm crtc type is HDMI.
V4: crtc type check extended to include _DDI and whitespace fixes
v5: Fix white spaces, remove the macro for delay. Revert the crtc type
check introduced in v4.
Cc: Imre Deak <imre.deak@intel.com>
Cc: <stable@vger.kernel.org> # v4.14+
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105887
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Tested-by: Daniel Scheller <d.scheller.oss@gmail.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710200205.1478-1-radhakrishna.sripada@intel.com
This fixes a static checker warning:
drivers/gpu/drm/drm_client.c:289 drm_client_buffer_create()
error: double free of 'buffer'
Extend drm_client_buffer_delete() to handle the case when there's no
dumb buffer attached and drop the extra kfree.
Fixes: c76f0f7cb5 ("drm: Begin an API for in-kernel clients")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712150414.46908-1-noralf@tronnes.org
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712152639.30934-1-tzimmermann@suse.de
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180713080625.18256-1-tzimmermann@suse.de
Reduce the module parameter to enable or disable.
The link stand by vs full link off was used only once.
And it was actually masking another bug fixed by commit
'84bb2916a683 ("drm/i915/psr: Check for SET_POWER_CAPABLE
bit at PSR init time.")'
So, let's remove these options for now. End goal is to
fully remove the mod param, moving it to a debugfs
interface in upcoming patches.
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Tarun Vyas <tarun.vyas@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712052715.8177-1-rodrigo.vivi@intel.com
This allows to read i915_edp_psr_status from tests without triggering
any AUX communication. Take this opportunity to move this under the
eDP-1 connector directory as the status we print is of the sink.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Suggested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705003121.2478-1-dhinakaran.pandiyan@intel.com
In commit "drm/i915: Wait for PSR exit before checking for vblank
evasion", the idea was to limit the PSR IDLE checks when PSR is
actually supported. While CAN_PSR does do that check, it doesn't
applies on a per-crtc basis. crtc_state->has_psr is a more granular
check that only applies to pipe(s) that have PSR enabled.
Without the has_psr check, we end up waiting on the eDP transcoder's
PSR_STATUS register irrespective of whether the pipe being updated is
driving it or not.
v2: Remove unnecessary parantheses, make checkpatch happy.
v3: Move the has_psr check to intel_psr_wait_for_idle and commit
message changes (DK).
v4: Derive dev_priv from intel_crtc_state (DK)
v5: Commit message changes to reflect the HW behavior (DK)
Fixes: a608987970 ("drm/i915: Wait for PSR exit before checking for vblank evasion")
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Tarun Vyas <tarun.vyas@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712053323.26266-1-tarun.vyas@intel.com
This tinydrm driver fails to link without the backlight support:
drivers/gpu/drm/tinydrm/ili9341.o: In function `ili9341_probe':
ili9341.c:(.text+0x578): undefined reference to `devm_of_find_backlight'
Fixes: 3fa0e8f6f9 ("drm/tinydrm: new driver for ILI9341 display panels")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709152106.990066-1-arnd@arndb.de
When commit af11942ee4 ("drm/sun4i: tcon-top: Cleanup clock handling")
was merged, the error handling path of the of_property_match_string was
changed to take into account the fact that the returned value of that
function wasn't an error pointer but an error code.
Unfortunately, this introduced a warning since the now returned value is an
integer, while the sun8i_tcon_top_register_gate function should return an
error pointer.
Fix that by calling ERR_PTR.
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: Chen-Yu Tsai <wens@csie.org>
Fixes: af11942ee4 ("drm/sun4i: tcon-top: Cleanup clock handling")
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712080818.3571-1-maxime.ripard@bootlin.com
Initial implementation of DE2 planes only supported fixed zpos.
Expand implementation with configurable zpos property.
Implementation background:
Channel in DE2 driver represents one DRM plane, whereas pipe is just
mapped channel to known Z position. Pipe 0 will always be at the bottom,
pipe 1 just above pipe 0 and so on. If, for example, channel 1 is mapped
at pipe 0 and channel 0 at pipe 1, whatever is on channel 0 will appear
on top.
Before this commit, channel id was used for addressing channel related
registers (prefixed with SUN8I_MIXER_CHAN_UI_ or SUN8I_MIXER_CHAN_VI_)
and pipe registers (prefixed with SUN8I_MIXER_BLEND_). Additionally,
register SUN8I_MIXER_BLEND_ROUTE, which takes care for mapping channels
to pipes had fixed value. It mapped channel 0 to pipe 0, 1 to 1 and so
on. Consequence of all that was fixed Z order of planes.
With this commit, pipe registers are using zpos property as index and
channel related registers still use channel id as index. Pipe mapping
register is now set dynamically too and pipe enable register is rebuild
every time to make sure only active pipes are enabled.
Testing was done to confirm that there is no issues if bottom plane
contains pixels with alpha value < 0xff and if it doesn't whole screen.
Tested-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706164732.24166-1-jernej.skrabec@siol.net
Support for Burst read in HW is added for HDCP2.2 compliance
requirement.
This patch enables the burst read for all the gmbus read of more than
511Bytes, on capable platforms.
v2:
Extra line is removed.
v3:
Macro is added for detecting the BURST_READ Support [Jani]
Runtime detection of the need for burst_read [Jani]
Calculation enhancement.
v4:
GMBUS0 reg val is passed from caller [ville]
Removed a extra var [ville]
Extra brackets are removed [ville]
Implemented the handling of 512Bytes Burst Read.
v5:
Burst read max length is fixed at 767Bytes [Ville]
v6:
Collecting the received reviewed-by.
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1530192889-5789-3-git-send-email-ramalingam.c@intel.com
GMBUS HW supports 511Bytes as Max Bytes per single RD/WR op. Instead of
enabling the 511Bytes per RD/WR cycle on legacy platforms for no
absolute ROIs, this change allows the max bytes per op upto 511Bytes
from Gen9 onwards.
v2:
No Change.
v3:
Inline function for max_xfer_size and renaming of the macro.[Jani]
v4:
Extra brackets removed [ville]
Commit msg is modified.
v5:
Collecting the Reviewed-By received.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1530192889-5789-2-git-send-email-ramalingam.c@intel.com
This patch appends the minimum helpers related to framebuffer and plane
to make vkms minimally usable.
Changes since V1:
- None
Changes since V2:
- Squash "Add plane helper struct" and "Add helper for framebuffer
create"
Changes since V3:
Daniel Vetter:
- Remove atomic_check from plane helper
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/d37807da7d3b39444b4c9abb149fe3c518d07c61.1531402095.git.rodrigosiqueiramelo@gmail.com
Since:
0d4b78b3d2 ("drm/i915/guc: Assert we have the doorbell before setting it up")
We have asserts in GuC doorbell related functions, which is a good thing.
Unfortunately, we were using those to check whether GuC FW is refusing
to allocate invalid doorbell - which makes the test fail.
Well, it would make the test WARN, except we fumbled cleanup ordering
and eat the BUG_ON instead.
Let's keep the asserts and use the internal implementation in the test.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107186
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712112013.3253-1-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Let's reorder things so that we can do onion teardown rather than double
goto.
References: b96f6ebfd0 ("drm/i915: Correctly handle error path in i915_gem_init_hw")
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712124810.25241-1-michal.winiarski@intel.com
If we fail the module load, we may try and cleanup before we even
allocate the GuC clients. KISS in order to try and re-enable
drv_module_reload for BAT.
Testcase: igt/drv_module_reload/basic-reload-inject
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712105830.20390-1-chris@chris-wilson.co.uk
Having DRM_SUN4I built-in but DRM_SUN8I_MIXER as a loadable module results in
a link error, as we try to access a symbol from the sun8i_tcon_top.ko module:
ERROR: "sun8i_tcon_top_of_table" [drivers/gpu/drm/sun4i/sun8i-drm-hdmi.ko] undefined!
ERROR: "sun8i_tcon_top_of_table" [drivers/gpu/drm/sun4i/sun4i-drm.ko] undefined!
This solves the problem by adding a silent symbol for the tcon_top module,
building it as a separate module in exactly the cases that we need it,
but in a way that it is reachable by the other modules.
Fixes: 57e23de02f ("drm/sun4i: DW HDMI: Expand algorithm for possible crtcs")
Fixes: ef0cf6441f ("drm/sun4i: Add support for traversing graph with TCON TOP")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180711144403.1022829-1-arnd@arndb.de
Currently, TCON supports 2 ways to match TCON with engine (mixer in this
case). Old way is to just traverse of graph backwards and compare node
pointer. New way is to match TCON and engine by their respective ids.
All SoCs with DE2 enabled till now used the old way, which means mixer
id was never used and thus never implemented.
However, for R40, only the new way will be used. To prepare for that,
implement mixer id fetching from DT.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180711112706.30222-1-jernej.skrabec@siol.net
This commit adds regular vblank events simulated through hrtimers, which
is a feature required by VKMS to mimic real hardware. Additionally, all
the vblank event send after pageflip is kept in the atomic_flush
function.
Changes since V1:
- Compute the vblank timer interval per interruption
Ville Syrjälä and Daniel Vetter:
- Removes hardcoded vblank interval to get it from user space
Changes since V2:
Chris Wilson
- Removes unnecessary algorithm to compute the next period
Daniel Vetter:
- Uses drm_calc_timestamping_constants to get the vblank interval
instead of calculating it manually
- Adds disable_vblank helper that turns of crtc
- Simplifies implementation by using drm_crtc_arm_vblank_event
- Replaces the code in atomic_begin to atomic_flush
- Removes unnecessary field in vkms_output
Changes since V3:
Daniel Vetter:
- Squash "drm/vkms: Add atomic helpers functions" into the commit that
handling vblank events simulated by hrtimers
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/7709bba40782ec06332d57fff337797b272581fc.1531359228.git.rodrigosiqueiramelo@gmail.com
VKMS currently does not handle dumb data, and as a consequence, it does
not provide mechanisms for handling gem. This commit adds the necessary
support for gem object/handler and the dumb functions.
Changes since V1:
Daniel Vetter:
- Add dumb buffer support to the same patchset
Changes since V2:
Haneen:
- Add missing gem_free_object_unlocked callback to fix the warning
"Memory manager not clean during takedown"
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/70b7becc91c6a323dbc15cb5fc912cbdfe4ef7d9.1531359228.git.rodrigosiqueiramelo@gmail.com
Commit 894a677f4b ("drm/cma-helper: Use the generic fbdev emulation")
broke almost all drivers that use the CMA helper.
The reason is that drm_client_new() requires that the DRM device has
been registered, but the drivers register fbdev before registering DRM.
Remove the requirement that DRM should be registered when creating a
new client.
Fixes: c76f0f7cb5 ("drm: Begin an API for in-kernel clients")
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180711155632.37437-1-noralf@tronnes.org
include/drm/tinydrm/tinydrm.h:34: warning: Function parameter or member 'fb_dirty' not described in 'tinydrm_device'
drivers/gpu/drm/tinydrm/mipi-dbi.c:272: warning: Function parameter or member 'crtc_state' not described in 'mipi_dbi_enable_flush'
drivers/gpu/drm/tinydrm/mipi-dbi.c:272: warning: Function parameter or member 'plane_state' not described in 'mipi_dbi_enable_flush'
Move struct member docs inline so it's not missed next time.
Cc: David Lechner <david@lechnology.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710150518.10528-1-noralf@tronnes.org
The change adds support for Sharp LQ035Q7DB03 3.5" QVGA TFT panel.
Note that this aged panel is already found in the kernel sources,
for instance in board mach files mach-mx21ads.c, mach-mx27ads.c,
mach-pcm043.c, lpd270.c and imx27-phytec-phycore-rdk.dts.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706185101.31186-1-vz@mleia.com
The kernel recently gained an augmented rbtree with the purpose of
cacheing the leftmost element of the rbtree, a frequent optimisation to
avoid calls to rb_first() which is also employed by the
execlists->queue. Switch from our open-coded cache to the library.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180629075348.27358-9-chris@chris-wilson.co.uk
Since live_workarounds poke around the w/a registers and checks to see
if they survive across a reset, we are prone to fouling the machine and
leaving it in a non-recoverable state. Wrap the probe inside a timeout
to abort the test if the reset fails.
v2: Include GEM_TRACE on declaring wedged.
v3: Add a few includes to make the header look standalone.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107188
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180711122952.18448-1-chris@chris-wilson.co.uk
Add a mutex into struct i915_address_space to be used while operating on
the vma and their lists for a particular vm. As this may be called from
the shrinker, we taint the mutex with fs_reclaim so that from the start
lockdep warns us if we are caught holding the mutex across an
allocation. (With such small steps we will eventually rid ourselves of
struct_mutex recursion!)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180711073608.20286-2-chris@chris-wilson.co.uk
We want to be able to set TCON TOP muxes at runtime. Add helpers for
that.
Old, static configuration of muxes at probe time is preserved for now.
It will be removed when R40 TCON starts using them.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710203511.18454-12-jernej.skrabec@siol.net
If error happens in sun8i_dw_hdmi_find_possible_crtcs(), nodes are not
released with of_node_put() before returning.
Fix that by calling of_node_put() when necessary. While on it, clean up
the code by using of_graph_get_remote_node() which also lowers number of
cases where error handling has to be performed.
Fixes: 57e23de02f ("drm/sun4i: DW HDMI: Expand algorithm for possible crtcs")
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710203511.18454-8-jernej.skrabec@siol.net
Function sun4i_tcon_find_engine_traverse() doesn't release node if it
needs to traverse of graph deeper than 1 level.
Fix this by calling of_node_put().
Fixes: 49836b11fe ("drm/sun4i: tcon: Generalize engine search algorithm")
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710203511.18454-6-jernej.skrabec@siol.net
There is no need to acquire reference to clock just to get its name.
This commit just cleans up the code. There is no functional change.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
[Maxime: Fixed the of_property_match_string error check]
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710203511.18454-5-jernej.skrabec@siol.net
Now that our stolen memory is already reserved by the x86 subsystem
(since commit "x86/gpu: reserve ICL's graphics stolen memory"), make
use of it.
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: x86@kernel.org
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180504203252.28048-2-paulo.r.zanoni@intel.com
Fixes: 22cc6c5e19 (drm/amdgpu: Add runtime VCN PG support)
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To make register read/write reliable
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN won't get power off when only jpeg active
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A call to ttm_bo_unref() clears the supplied pointer to NULL, while
ttm_bo_put() does not. None of the converted call sites requires the
pointer to become NULL, so the respective assign operations has been
left out from the patch.
Signed-off-by: Thomas Zimmermann <contact@tzimmermann.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thomas Zimmermann <contact@tzimmermann.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The TTM buffer-object interface provides ttm_bo_reference() and
ttm_bo_unref() for managing reference counts. Replacing them with
ttm_bo_get() and ttm_bo_put() aligns the API with conventions used
throughout the Linux kernel.
The implementation of ttm_bo_unref() clears the supplied pointer
to NULL. This leads to workarounds where the caller saves the
pointer's value before de-referencing the BO. ttm_bo_put() does
not clear the supplied pointer.
Signed-off-by: Thomas Zimmermann <contact@tzimmermann.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make use of the swap macro and remove unnecessary variable *tmp_mem*.
This makes the code easier to read and maintain. Also, reduces the
stack usage.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The previous change wasn't covering smu 7 and 8 and therefore DC was
seeing wrong clock values.
This fixes an issue where the pipes seem to hang with a 4k DP and 1080p
HDMI display.
Fixes: c3df50abc84b ("drm/amd/pp: Convert clock unit to KHz as defined")
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Cc:rex.zhu@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Problem: When PD/PT update made by CPU root PD was not yet mapped causing
page fault.
Fix: Verify root PD is mapped into CPU address space.
v2:
Make sure that we add the root PD to the relocated list
since then it's get mapped into CPU address space bt default
in amdgpu_vm_update_directories.
v3:
Drop change to not move kernel type BOs to evicted list.
v4:
Remove redundant bo move to relocated list.
Link: https://bugs.freedesktop.org/show_bug.cgi?id=107065
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Extract and present the reposnsible process and thread when
VM_FAULT happens.
v2: Use getter and setter functions.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Jim Qu <Jim.Qu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add process and thread names and pids and a function to extract
this info from relevant amdgpu_vm.
v2: Add documentation and fix identation.
v3: Add getter and setter functions for amdgpu_task_info.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Jim Qu <Jim.Qu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
const to avoid hard-to-find bugs where some function overrides a
function pointer.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is good practice to make global function tables const to avoid
accidental override.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise we try to program hardware with the wrong watermark functions
when multiple DCE generations are installed in one system.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The default clock unit in powerplay is 10KHz.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
so we can read/write the registers in CLK domain
through RREG32/WREG32_SOC15
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Without this, there could not be enough slots, which could trigger the
BUG_ON in reservation_object_add_shared_fence.
v2:
* Jump to the error label instead of returning directly (Jerry Zhang)
v3:
* Reserve slots for command submission after VM updates (Christian König)
Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/106418
Reported-by: mikhail.v.gavrilov@gmail.com
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kmap happens after bo pin, so unpin is required on error
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of calling gart address space on every bo pin,
allocates it on demand
v2: fix error handling
v3: drop the change on amdgpu_amdkfd_gpuvm.c, not needed.
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It could be got by amdgpu_bo_gpu_offset() if need
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The ARRAY_SIZE() macro is type size_t. If s6e8aa0_dcs_read() returns a
negative error code, then "ret < ARRAY_SIZE(id)" is false because the
negative error code is type promoted to a high positive value.
Fixes: 02051ca063 ("drm/panel: add S6E8AA0 driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180704093807.s3lqsb2v6dg2k43d@kili.mountain
When panel power down, p079zca need delay between reset and disable
power supply, but p097pfg does not need it. Similarly p097zca needs
a delay after entering panel sleep mode. So add two delay properties,
so we can meet these two panel power down sequence.
Signed-off-by: Lin Huang <hl@rock-chips.com>
[add sleep-mode delay]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180702102721.3546-3-heiko@sntech.de
Refactor Innolux P079ZCA panel driver, let it support multi panels from
Innolux that share similar power sequences.
Panels may require different power supplies so use regulator bulk
interfaces and define per panel supply-names.
Changes in v2:
- Change regulator property name to meet the panel datasheet
Changes in v3:
- this patch only refactor P079ZCA panel to support multi panel,
support P097PFG panel in another patch
Changes in v4:
- Modify the patch which suggest by Thierry
Changes in v5:
- use regulator_bulk to handle different supply number
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180702102721.3546-2-heiko@sntech.de
Currently, ret is being checked for an error condition however it
is not being assigned in the previous statement on the call of
function mipi_dsi_dcs_exit_sleep_mode. Add in the missing assignment
of ret.
Detected by CoverityScan, CID#1470174, 1470178 ("Unchecked return value")
Fixes: 26aec25593 ("drm/panel: Add Ilitek ILI9881c panel driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180626160354.1363-1-colin.king@canonical.com
This adds support for the DataImage SCF0700C48GGU18 7.0" WVGA (800x480)
TFT LCD panel. The panel has 24-bit parallel interface and can be
supported by the simple panel driver.
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1529930490-11874-2-git-send-email-michal.vokac@ysoft.com
The sync in some panels needs to be driven by different edge of the pixel
clock compared to data. This is reflected by the
DISPLAY_FLAGS_SYNC_(POS|NEG)EDGE in videmode flags.
Add similar similar definitions for bus_flags and convert the sync drive
edge via drm_bus_flags_from_videomode().
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180618132242.8673-2-tomi.valkeinen@ti.com
The patch adds support for BOE HV070WSA-100 WSVGA 7.01 inch panel to the
panel-simple driver. The panel is used in Exynos5250-arndale boards.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Maciej Purski <m.purski@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1529396370-18761-6-git-send-email-m.purski@samsung.com
Having a device with a status property != "okay" in the DT is a valid
use case, and we should not prevent the registration of the DRM device
when the DSI device connected to the DSI controller is disabled.
Consider the ENODEV return code as a valid result and do not expose the
DSI encoder/connector when it happens.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180509130042.9435-5-boris.brezillon@bootlin.com
There's no point searching for a drm_bridge or drm_panel if the OF node
we're pointing has a status property that is not "okay" or "ok". Just
return -ENODEV in this case.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180509130042.9435-4-boris.brezillon@bootlin.com
DT nodes might be present in the DT but with a status property set to
"disabled" or "fail". In this case, we should not return -EPROBE_DEFER
when the caller asks for a drm_panel instance. Return -ENODEV instead.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180509130042.9435-3-boris.brezillon@bootlin.com
Right now, the DRM panel logic returns NULL when a panel pointing to
the passed OF node is not present in the list of registered panels.
Most drivers interpret this NULL value as -EPROBE_DEFER, but we are
about to modify the semantic of of_drm_find_panel() and let the
framework return -ENODEV when the device node we're pointing to has
a status property that is not equal to "okay" or "ok".
Let's first patch the of_drm_find_panel() implementation to return
ERR_PTR(-EPROBE_DEFER) instead of NULL and patch all callers to replace
the '!panel' check by an 'IS_ERR(panel)' one.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180509130042.9435-2-boris.brezillon@bootlin.com
This patch adds support for DLC DLC0700YZG-1 1024x600 LVDS panels
to the simple-panel driver.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
[m.felsch@pengutronix.de: fix typo in compatible dt-binding]
[m.felsch@pengutronix.de: add property bindings]
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180523092504.5142-3-m.felsch@pengutronix.de
The Emerging Display Technology ETM0700G0EDH6 is the
uses the same panel as the ETM0700G0BDH6. It differs
in the hardware design for the backlight and the
touchscreen i2c interface. As the new display type has
different requirements for drive-strengths on the i2c-bus,
add an additional compatible to allow the handling of it or warn
about incompatible cpu and display combinations.
Signed-off-by: Jan Tuerk <jan.tuerk@emtrion.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180619095546.24445-3-jan.tuerk@emtrion.com
The Emerging Display Technology ETM0700G0BDH6 is exactly
the same display as the ETM0700G0DH6, exept the pixelclock
polarity. Therefore re-use the ETM0700G0DH6 modes. It is
used by default on emtrion Avari based development kits.
Signed-off-by: Jan Tuerk <jan.tuerk@emtrion.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180619095546.24445-2-jan.tuerk@emtrion.com
This adds support for the Rocktech Display Ltd. RK070ER9427
800(RGB)x480 TFT LCD panel, which can be supported by the
simple panel driver.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180607134648.2902-1-jagan@amarulasolutions.com
On unwinding following a critical failure inside GEM init, we also need
to be sure to flush the workers before unloading the module.
Testcase: igt/drv_module_reload/basic-reload-inject
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710094421.16223-1-chris@chris-wilson.co.uk
Remove drm_fb_cma_fbdev_init_with_funcs(), its only user tinydrm has
moved to drm_fbdev_generic_setup().
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703160354.59955-9-noralf@tronnes.org
This switches the CMA helper drivers that use its fbdev emulation over
to the generic fbdev emulation. It's the first phase of using generic
fbdev. A later phase will use DRM client callbacks for the
lastclose/hotplug/remove callbacks.
There are currently 2 fbdev init/fini functions:
- drm_fb_cma_fbdev_init/drm_fb_cma_fbdev_fini
- drm_fbdev_cma_init/drm_fbdev_cma_fini
This is because the work on generic fbdev came up during a fbdev
refactoring and thus wasn't completed. No point in completing that
refactoring when drivers will soon move to drm_fb_helper_generic_probe().
tinydrm uses drm_fb_cma_fbdev_init_with_funcs().
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703160354.59955-5-noralf@tronnes.org
This is the first step in getting generic fbdev emulation.
A drm_fb_helper_funcs.fb_probe function is added which uses the
DRM client API to get a framebuffer backed by a dumb buffer.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703160354.59955-3-noralf@tronnes.org
This the beginning of an API for in-kernel clients.
First out is a way to get a framebuffer backed by a dumb buffer.
Only GEM drivers are supported.
The original idea of using an exported dma-buf was dropped because it
also creates an anonomous file descriptor which doesn't work when the
buffer is created from a kernel thread. The easy way out is to use
drm_driver.gem_prime_vmap to get the virtual address, which requires a
GEM object. This excludes the vmwgfx driver which is the only non-GEM
driver apart from the legacy ones. A solution for vmwgfx will have to be
worked out later if it wants to support the client API which it probably
will when we have a bootsplash client.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703160354.59955-2-noralf@tronnes.org
In the next patch, we will make a fairly minor change to flush
outstanding resets before suspend. In order to keep churn to a minimum
in that functional patch, we fix up the comments and coding style now.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709130208.11730-7-chris@chris-wilson.co.uk
Across a reset, the seqno (and thus hangcheck) should restart and the
hangcheck naturally progress, for when it does not, we want to declare an
emergency. Currently, we only detect if reset and reinit fails, but we
do not detect if the call to reinit succeeds but the HW is fried - as we
are resetting hangcheck on initialisation the engine. Remove that and
rely on the natural progress to reset the hangcheck timer.
References: e21b141376 ("drm/i915: Mark the hangcheck as idle when unparking the engines")
References: 1fd00c0fae ("drm/i915: Declare the driver wedged if hangcheck makes no progress")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709130208.11730-2-chris@chris-wilson.co.uk
In our swizzling selftests, we cannot predict the physical address of
the target page (at least not simply!) and so skip bit17 swizzles.
However, there are two bit17 swizzle modes and we only skipped one, with
the second being observed on the lab gdg causing the test to fail,
as soon as we hit a page with bit17 set in its address.
Testcase: igt/drv_selftest/live_objects #gdg
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709194915.5789-1-chris@chris-wilson.co.uk
Be pessimistic and presume that we actually allocate every page we
exercise via the mock_gtt (e.g. for gvt). In which case we have to keep
our working set under the available physical memory to prevent oom.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180710080424.7821-1-chris@chris-wilson.co.uk
Error messages are intended to be addressed to the user; be clear,
succinct, instructive and unambiguous. Adding the function name to
that message does not add any information the user requires and in
the process makes the message less clear.
E.g.
[ 245.539711] i915 0000:00:02.0: [drm:i915_gem_init [i915]] Failed to initialize GPU, declaring it wedged!
becomes
[ 245.539711] i915 0000:00:02.0: Failed to initialize GPU, declaring it wedged!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709134858.12446-1-chris@chris-wilson.co.uk
This helps initramfs builder and other tools to know the full dependencies
of i915 and have gvt module loaded with i915.
v2: add condition and change to pre-dependency (Chris)
v3: move declaration to gvt.c. (Chris)
v4: remove xengt (Zhenyu)
Signed-off-by: Hang Yuan <hang.yuan@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
More features for 4.19:
- Use core pcie functionality rather than duplicating our own for pcie
gens and lanes
- Scheduler function naming cleanups
- More documentation
- Reworked DC/Powerplay interfaces to improve power savings
- Initial stutter mode support for RV (power feature)
- Vega12 powerplay updates
- GFXOFF fixes
- Misc fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705221447.2807-1-alexander.deucher@amd.com
In igt_flush_test() we install a background timer in order to ensure
that the wait completes within a certain time. We can now tell the wait
that it has to complete within a timeout, and so no longer need the
background timer.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709122044.7028-3-chris@chris-wilson.co.uk
With a broken GPU we expect it to fail during the initial
GPU setup where do a couple of context switches to record the defaults.
This is a task that takes a few milliseconds even on the slowest of
devices, but we may have to wait 60s for hangcheck to give in and
declare the machine inoperable. In this a case where any gpu hang is
unacceptable, both from a timeliness and practical standpoint.
We can therefore set a timeout on our wait-for-idle that is shorter than
the hangcheck (which may be up to 60s for a declaring a wedged driver)
and so detect the broken GPU much more quickly during driver load (and
so prevent stalling userspace for ages).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709122044.7028-2-chris@chris-wilson.co.uk
Usually we have no idea about the upper bound we need to wait to catch
up with userspace when idling the device, but in a few situations we
know the system was idle beforehand and can provide a short timeout in
order to very quickly catch a failure, long before hangcheck kicks in.
In the following patches, we will use the timeout to curtain two overly
long waits, where we know we can expect the GPU to complete within a
reasonable time or declare it broken.
In particular, with a broken GPU we expect it to fail during the initial
GPU setup where do a couple of context switches to record the defaults.
This is a task that takes a few milliseconds even on the slowest of
devices, but we may have to wait 60s for hangcheck to give in and
declare the machine inoperable. In this a case where any gpu hang is
unacceptable, both from a timeliness and practical standpoint.
The other improvement is that in selftests, we do not need to arm an
independent timer to inject a wedge, as we can just limit the timeout on
the wait directly.
v2: Include the timeout parameter in the trace.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709122044.7028-1-chris@chris-wilson.co.uk
BXT supports EDP. However since GVT-g only simulate DP monitor
to guest and handles EDP_PSR_IMR and EDP_PSR_IIR as default MMIO
r/w. If guest r/w these IMR/IIR, GVT-g won't simulate the real
HW behavior and below warning is printed:
--------
Interrupt register 0x64838 is not zero: 0xffffffff
WARNING: CPU: 1 PID: 1 at drivers/gpu/drm/i915/i915_irq.c:161
gen3_assert_iir_is_zero+0x34/0xa0
Call Trace:
gen8_de_irq_postinstall+0xad/0x330
gen8_irq_postinstall+0x23/0x80
drm_irq_install+0xb5/0x130
i915_driver_load+0xafd/0xf70
--------
Since GVT-g won't simulate EDP to guest, always set EDP_PSR_IMR
and EDP_PSR_IIR IMR/IIR to 0.
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Now GVTg supports shadowing both 2M/64K huge gtt pages. So let's turn on
the cap info bit VGT_CAPS_HUGE_GTT.
v2: Split changes in i915 side into a separated patch.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Don't forget to free allocated spt if shadowing failed.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
If the guest update the 64K gtt entry before changing IPS bit of PDE, we
need to re-shadow the whole page table. Because we have ignored all
updates to unused entries.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This add 2M huge gtt support for GVTg. Unlike 64K gtt entry, we can
shadow 2M guest entry with real huge gtt. But before that, we have to
check memory physical continuous, alignment and if it is supported on
the host. We can get all supported page sizes from
intel_device_info.page_sizes.
Finally we must split the 2M page into smaller pages if we cannot
satisfy guest Huge Page.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
To support huge gtt, we need to support huge pages in kvmgt first.
This patch adds a 'size' param to the intel_gvt_mpt::dma_map_guest_page
API and implements it in kvmgt.
v2: rebase.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Finally, this add the first huge gtt support for GVTg - 64K pages. Since
64K page and 4K page cannot be mixed on the same page table, so we always
split a 64K entry into small 4K page. And when unshadow guest 64K entry,
we need ensure all the shadowed entries in shadow page table also get
cleared.
For page table which has 64K gtt entry, only PTE#0, PTE#16, PTE#32, ...
PTE#496 are used. Unused PTEs update should be ignored.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
64K PTE is special, only PTE#0, PTE#16, PTE#32, ... PTE#496 are used in
the page table.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
We need a interface to allocate a pure shadow page which doesn't have
a guest page associated with. Such shadow page is used to shadow 2M
huge gtt entry.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Add clear_pse operation in case we need to split huge gtt into small pages.
v2: correct description.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This add a software PTE flag on the Ignored bit of PTE. It will be used
to identify splited 64K shadow entries.
v2: fix mask definition.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
This change help us detect the real entry type per PSE and IPS setting.
For 64K entry, we also need to check reg GEN8_GAMW_ECO_DEV_RW_IA.
v2: Extend IPS mmio control to Gen10. (Matthew Auld)
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
The register RENDER_HWS_PGA_GEN7 is renamed to GEN8_GAMW_ECO_DEV_RW_IA
from GEN8 which can control IPS enabling.
v3: MMIO control for IPS is not removed from gen9 but gen10 (Matthew Auld)
v2: IPS of all engines must be enabled together for gen9.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Add three IPS operation functions to test/set/clear IPS in PDE.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Add a new entry type GTT_TYPE_PPGTT_PTE_64K_ENTRY. 64K entry is very
different from 2M/1G entry. 64K entry is controlled by IPS bit in upper
PDE. To leverage the current logic, I take IPS bit as 'PSE' for PTE
level. Which means, 64K entries can also processed by get_pse_type().
v2: Make it bisectable.
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
In the next patch, we will want a third distinct class of timeline that
may overlap with the current pair of client and engine timeline classes.
Rather than use the ad hoc markup of SINGLE_DEPTH_NESTING, initialise
the different timeline classes with an explicit subclass.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706210710.16251-1-chris@chris-wilson.co.uk
Mimic what is done in drm_atomic_commit_tail() and call
drm_atomic_helper_fake_vblank() so that VBLANK events are faked
when the drm_crtc_state.no_vblank is true. Will be needed when we'll
add support for the transposer block.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703075022.15138-8-boris.brezillon@bootlin.com
In some cases CRTCs are active but are not able to generating events, at
least not at every frame at it's expected to.
This is typically the case when the CRTC is feeding a writeback connector
that has no job queued. In this situation the CRTC is usually stopped
until a new job is queued, and this can lead to timeouts when part of
the pipeline is updated but no new jobs are queued to the active
writeback connector.
In order to solve that, we add a ->no_vblank flag to drm_crtc_state
and ask the CRTC drivers to set it to true when they know they're not
able to generate VBLANK events. The core drm_atomic_helper_fake_vblank()
helper can then be used to fake VBLANKs at commit time.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703075022.15138-6-boris.brezillon@bootlin.com
drm_atomic_helper_wait_for_vblanks() assumes the CRTC will continuously
generate VBLANK events and the vblank counter will keep increasing.
While this work for a regular pipeline, it doesn't when you have the
CRTC is feeding the transposer block, because this block works in
oneshot mode, and, by the time we reach
drm_atomic_helper_wait_for_vblanks() the only VBLANK event might have
already been sent and the VBLANK counter will stay unchanged, thus
triggering a timeout.
Luckily, we can replace the drm_atomic_helper_wait_for_vblanks() call
by drm_atomic_helper_wait_for_flip_done() because the only thing we
want to check when calling drm_atomic_helper_wait_for_vblanks() from
vc4_atomic_complete_commit() is that new FBs are in use and the old
ones can be safely released.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703075022.15138-5-boris.brezillon@bootlin.com
Not all writeback connector implementations might want to commit things
from the connector driver. Some, like the malidp driver, commit things
from their main commit_tail() function, and would rather not have to
implement a dummy hook for drm_connector_helper_funcs.atomic_commit().
Make this function optional and reflect this fact in the doc.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703075022.15138-4-boris.brezillon@bootlin.com
Use container_of() instead of type casting so that it keeps working
even if base is moved inside the drm_writeback_connector struct.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703075022.15138-2-boris.brezillon@bootlin.com
Inside the mock GEM device, we try to grab the runtime pm for the fake
device to prevent it from ever suspending. However, if CONFIG_PM is not
set, trying to obtain the wakref returns an error which we WARN about.
Suppress the expected warning.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706205947.11209-1-chris@chris-wilson.co.uk
clflush is an unserialised instruction and the IA manual strongly advises
you to serialise it with a mb. To be cautious, apply one before and one
after, so that it is serialised with both writes and reads without
worrying too much about the required direction.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706174926.4712-1-chris@chris-wilson.co.uk
A new param DRM_VMW_PARAM_SM4_1, is added for user space to determine
availability of SM4.1.
Minor version bump for SM4.1.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Support for SVGA3D_SURFACE_MULTISAMPLE and surface mob size according
to sample count.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
New ioctls DRM_VMW_GB_SURFACE_CREATE_EXT and DRM_VMW_GB_SURFACE_REF_EXT
are added which support 64-bit wide svga device surface flags, quality
level and multisample pattern.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Since svga device introduced new 64bit SVGA3dSurfaceAllFlags, vmwgfx
now stores the surface flags internally as SVGA3dSurfaceAllFlags.
For legacy surface define commands, only lower 32-bit is used.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
SVGA device added new command SVGA3dCmdDefineGBSurface_v3 which allows
64-bit SVGA3dSurfaceAllFlags. This commit adds support for
SVGA3dCmdDefineGBSurface_v3 command in vmwgfx.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
A boolean flag in device private structure to specify if the device
support SM4_1.
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
A new command to support Intra-Surface-Copy.
Signed-off-by: Neha Bhende <bhenden@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
The device exposes a new capability register. Add support for it.
Signed-off-by: Neha Bhende <bhenden@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Using a VMA on more than one timeline concurrently is the exception
rather than the rule (using it concurrently on multiple engines). As we
expect to only use one active tracker, store the most recently used
tracker inside the i915_vma itself and only fallback to the rbtree if
we need a second or more concurrent active trackers.
v2: Comments on how we overwrite any existing last_active cache.
v3: __list_del_entry() before list_replace_init() is confusing and, much
more important, entirely redundant.
v4: Note that both last_active and the rbtree may be simultaneously
tracking this timeline, albeit with different requests, and so the vma
may be retired twice for the same timeline.
v5: No, that list_del is required!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706123157.9645-1-chris@chris-wilson.co.uk
In the next patch, we will want to be able to use more flexible request
timelines that can hop between engines. From the vma pov, we can then
not rely on the binding of this request to an engine and so can not
ensure that different requests are ordered through a per-engine
timeline, and so we must track activity of all timelines. (We track
activity on the vma itself to prevent unbinding from HW before the HW
has finished accessing it.)
v2: Switch to a rbtree for 32b safety (since using u64 as a radixtree
index is fraught with aliasing of unsigned longs).
v3: s/lookup_active/active_instance/ because we can never agree on names
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706103947.15919-5-chris@chris-wilson.co.uk
Handling such a late error in request construction is tricky, but to
accommodate future patches which may allocate here, we potentially could
err. To handle the error after already adjusting global state to track
the new request, we must finish and submit the request. But we don't
want to use the request as not everything is being tracked by it, so we
opt to cancel the commands inside the request.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706103947.15919-3-chris@chris-wilson.co.uk
In the next patch, we will want to start skipping requests on failing to
complete their payloads. So export the utility function current used to
make requests inoperable following a failed gpu reset.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706103947.15919-2-chris@chris-wilson.co.uk
Currently all callers are responsible for adding the vma to the active
timeline and then exporting its fence. Combine the two operations into
i915_vma_move_to_active() to move all the extra handling from the
callers to the single site.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706103947.15919-1-chris@chris-wilson.co.uk
Pull in the malidp writeback implementation for further work on writeback in drm-misc-next.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Replace the magic bit with the proper symbolic name for instructing
MI_STORE_DWORD_IMM to use a virtual address (on gen3) or the global GTT
address (still virtual!) on gen4+.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706142323.25699-1-chris@chris-wilson.co.uk
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Limit the GTT size we try and allocate to ensure that it fits within RAM
and does not trigger the oomkiller indiscriminately.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706125338.24432-1-chris@chris-wilson.co.uk
We already maually control the CPU cache for our page table directories,
so we can tell the dma mapper to skip doing it as well.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706122611.4142-2-chris@chris-wilson.co.uk
As we propagate back the error to the caller for them to handle, we do
not need the lowest level spitting out a redundant warning upon an
allocation failure inside dma_map_page().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706122611.4142-1-chris@chris-wilson.co.uk
If we have just completed a WC write, we must ensure that the WCB (Write
Combining Buffer) is flushed out to main memory before we can expect to
see the results. This is especially important when mixing WC with GTT as
the physical paths are different and cachelines are not naturally flushed.
Testcase: igt/drv_selftests/live_coherency #gdg
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706115402.18547-1-chris@chris-wilson.co.uk
If the GPU is irrecoverably wedged, we can not execute any requests
making testing execlists (request execution) pointless. Skip!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706114510.18467-1-chris@chris-wilson.co.uk
If the HW (or driver) doesn't support logical contexts, don't pretend we
gain anything from trying to execute GPU commands with them. At best it
reports -ENODEV, which is an unhelpful failure that we should just skip.
v2: Be more specific and check the driver/engine caps for logical (HW)
context support.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706101923.28548-1-chris@chris-wilson.co.uk
Avoid looking at the magical engines[RCS] to decide if the HW and driver
supports logical contexts, and instead record that knowledge during
initialisation.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706101442.21279-1-chris@chris-wilson.co.uk
We can simplify the encoder's get_power_domains() hook by calling it
only if the encoder is active. That way the hook can return its power
domains unconditionally without checking the active state by calling
encoder::get_hw_state(). This get_hw_state() query is in fact
redundant since it's already done by intel_modeset_readout_hw_state()
setting the encoder's crtc or leaving it NULL accordingly. Let's use
this fact to decide if the encoder is active.
While at it clarify the comment in intel_ddi_get_power_domains() about
primary vs. fake MST encoders and make sure we never do an incorrect
encoder->dig_port cast for fake MST encoders.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180705122654.17072-1-imre.deak@intel.com
This interface is deprecated, and has been replaced by the upstream
drm crc interface.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tomi Sarvela <tomi.p.sarvela@intel.com>
Cc: Petri Latvala <petri.latvala@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180628072303.14175-1-maarten.lankhorst@linux.intel.com
If the GPU is terminally wedged we cannot submit any requests into a
context, completely unfulfilling our purpose of doing so. As this
expectedly fails, skip over the test.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706065332.15214-9-chris@chris-wilson.co.uk
We test the GPU handling of huge pages by submitting requests that write
into a huge page, but if the GPU is irrecoverably wedged we cannot
submit any requests. As the test expectedly fails, skip over it.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706065332.15214-8-chris@chris-wilson.co.uk
If the GPU is irrecoverably wedged, we cannot submit any requests and so
cannot make the GTT busy in order to test evicting active objects. As
this expectedly fails, skip over the test.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706065332.15214-7-chris@chris-wilson.co.uk
If the GPU is irrecoverably wedged, we cannot submit any request and
therefore cannot query the register state of the context (which is done
using the GPU command stream). So skip over the test as it expectedly
fails.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706065332.15214-6-chris@chris-wilson.co.uk
As we keep VMA around until the object is destroyed, when testing
partial tiling we instantiate many, many VMA (as the object is huge
allowing for many different partial regions). We test elsewhere our
handling of populating large objects with a full set of VMA and checking
we can retrieve them afterwards, but in this test we incur the cost of
flushing all VMA after every GTT write, dramatically slowing down the
test.
References: https://bugs.freedesktop.org/show_bug.cgi?id=107130
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706065332.15214-2-chris@chris-wilson.co.uk
Having found the error causing the IGT test to fail, downgrade the
verbose logging so that we stop flooding the syslogs as we deliberately
provoke it many thousands of time during selftests.
References: 10195b1e44 ("drm/i915: Show vma allocator stack when in doubt")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180706065332.15214-1-chris@chris-wilson.co.uk
This patch defines AUX lane registers for PORT_PCS_DW1,
PORT_TX_DW2, PORT_TX_DW4, PORT_TX_DW5 used during
dsi enabling.
v2: Review comments from Jani N:
- Define _ICL_PORT_PCS_DW1_AUX_A for consistency
- Three spaces for bitfield definition.
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1530798591-2077-8-git-send-email-madhav.chauhan@intel.com
To save power, unused lanes should be powered
down using the bitfield of PORT_CL_DW10.
v2: Review comments from Jani N
- Put default label next to case 4
- Include the shifts in the macros
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1530798591-2077-7-git-send-email-madhav.chauhan@intel.com
This register used to power down individual lanes for
DDI/DSI ports. Bitfields to power up/down various
combinations of lanes are also added in this patch.
v2: Review comments from Jani N
- Use override instead of "override" for bitfields
- Define mask for override bitfield
- Define PWR_DOWN_LN* macros shifted in place
v3: Correct PWR_DOWN_LN_MASK value (Jani N)
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1530798591-2077-6-git-send-email-madhav.chauhan@intel.com
Hersen Wu