It's a classic example of memleak, we allocate something, we fail and
never free the resources.
Make sure we free all resources on policy ->init() failures.
Fixes: a28b2bfc09 ("cppc_cpufreq: replace per-cpu data array with a list")
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Qian Cai <quic_qiancai@quicinc.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Commit e3c0623608 ("cpufreq: add cpufreq_driver_resolve_freq()")
introduced this callback, back in 2016, for drivers that provide the
->target() callback.
The kernel hasn't seen a single user of it in the past 5 years and
it is not likely to be used any time soon.
Remove it for now.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
__cpufreq_driver_target() open codes cpufreq_driver_resolve_freq(), lets
make the former reuse the later.
Separate out __resolve_freq() to accept relation as well as an argument
and use it at both the locations.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Now that all users of ->stop_cpu() have been migrated to using other
callbacks, drop it from the core.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Minor edits in the subject and changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 367dc4aa93 ("cpufreq: Add stop CPU callback to cpufreq_driver
interface") added the ->stop_cpu() callback to allow the drivers to do
clean up before the CPU is completely down and its state can't be
modified.
At that time the CPU hotplug framework used to call the cpufreq core's
registered notifier for different events like CPU_DOWN_PREPARE and
CPU_POST_DEAD. The ->stop_cpu() callback was called during the
CPU_DOWN_PREPARE event.
This is no longer the case, cpuhp_cpufreq_offline() is called only
once by the CPU hotplug core now and we don't really need two
separate callbacks for cpufreq drivers, i.e. ->stop_cpu() and
->exit(), as everything can be done from the ->exit() callback
itself.
Migrate to using the ->exit() callback instead of ->stop_cpu().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Minor changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 367dc4aa93 ("cpufreq: Add stop CPU callback to cpufreq_driver
interface") added the ->stop_cpu() callback to allow the drivers to do
clean up before the CPU is completely down and its state can't be
modified.
At that time the CPU hotplug framework used to call the cpufreq core's
registered notifier for different events like CPU_DOWN_PREPARE and
CPU_POST_DEAD. The ->stop_cpu() callback was called during the
CPU_DOWN_PREPARE event.
This is no longer the case, cpuhp_cpufreq_offline() is called only
once by the CPU hotplug core now and we don't really need two
separate callbacks for cpufreq drivers, i.e. ->stop_cpu() and
-<exit(), as everything can be done from the ->exit() callback
itself.
Migrate to using the ->exit() callback instead of ->stop_cpu().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Minor edits in the changelog and subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Combine the ->stop_cpu() and ->offline() callback routines for
intel_pstate in the active mode so as to avoid setting the
->stop_cpu callback pointer which is going to be dropped from
the framework.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
In the CPU removal path the ->offline() callback provided by the
driver is always invoked before ->exit(), but in the cpufreq_online()
error path it is not, so ->exit() is expected to somehow know the
context in which it has been called and act accordingly.
That is less than straightforward, so make cpufreq_online() invoke
the driver's ->offline() callback, if present, on errors before
->exit() too.
This only potentially affects intel_pstate.
Fixes: 91a12e91dc ("cpufreq: Allow light-weight tear down and bring up of CPUs")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
This reverts commit 4c38f2df71.
There are few races in the frequency invariance support for CPPC driver,
namely the driver doesn't stop the kthread_work and irq_work on policy
exit during suspend/resume or CPU hotplug.
A proper fix won't be possible for the 5.13-rc, as it requires a lot of
changes. Lets revert the patch instead for now.
Fixes: 4c38f2df71 ("cpufreq: CPPC: Add support for frequency invariance")
Reported-by: Qian Cai <quic_qiancai@quicinc.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since commit 759f534e93ac(CPUFREQ: Loongson2: drop set_cpus_allowed_ptr()),
the header <linux/sched.h> is useless in oongson2_cpufreq.c, so remove it.
Signed-off-by: Hailong Liu <liu.hailong6@zte.com.cn>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since commit '205dcc1ecbc5(cpufreq/sh: Replace racy task affinity logic)'
the header <linux/sched.h> is useless in sh-cpufreq.c, so remove it.
Signed-off-by: Hailong Liu <liu.hailong6@zte.com.cn>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Local variable 'count' will be initialized and 'ret' is also not
required, so remove the redundant initialization and get rid of
'ret'.
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
One of the previous commits introducing hybrid processor support to
intel_pstate broke build with CONFIG_ACPI unset.
Fix that and while at it make empty stubs of two functions related
to ACPI CPPC static inline and fix a spelling mistake in the name of
one of them.
Fixes: eb3693f052 ("cpufreq: intel_pstate: hybrid: CPU-specific scaling factor")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Rename them in accordance with the coding guidelines.
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Quieten an implicit-fallthrough warning in sc520_freq.c:
../drivers/cpufreq/sc520_freq.c: In function 'sc520_freq_get_cpu_frequency':
../include/linux/printk.h:343:2: warning: this statement may fall through [-Wimplicit-fallthrough=]
printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
../drivers/cpufreq/sc520_freq.c:43:3: note: in expansion of macro 'pr_err'
pr_err("error: cpuctl register has unexpected value %02x\n",
../drivers/cpufreq/sc520_freq.c:45:2: note: here
case 0x01:
Fixes: bf6fc9fd2d ("[CPUFREQ] AMD Elan SC520 cpufreq driver.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Users may disable HWP in firmware, in which case intel_pstate wouldn't load
unless the CPU model is explicitly supported.
See also commit d8de7a44e1 ("cpufreq: intel_pstate: Add Skylake servers
support").
Suggested-by: Doug Smythies <dsmythies@telus.net>
Tested-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Users may disable HWP in firmware, in which case intel_pstate wouldn't load
unless the CPU model is explicitly supported.
Add ICELAKE_X to the list of CPUs that can register intel_pstate while not
advertising the HWP capability. Without this change, an ICELAKE_X in no-HWP
mode could only use the acpi_cpufreq frequency scaling driver.
See also commit d8de7a44e1 ("cpufreq: intel_pstate: Add Skylake servers
support").
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The scaling factor between HWP performance levels and CPU frequency
may be different for different types of CPUs in a hybrid processor
and in general the HWP performance levels need not correspond to
"P-states" representing values that would be written to
MSR_IA32_PERF_CTL if HWP was disabled.
However, the policy limits control in cpufreq is defined in terms
of CPU frequency, so it is necessary to map the frequency limits set
through that interface to HWP performance levels with reasonable
accuracy and the behavior of that interface on hybrid processors
has to be compatible with its behavior on non-hybrid ones.
To address this problem, use the observations that (1) on hybrid
processors the sysfs interface can operate by mapping frequency
to "P-states" and translating those "P-states" to specific HWP
performance levels of the given CPU and (2) the scaling factor
between the MSR_IA32_PERF_CTL "P-states" and CPU frequency can be
regarded as a known value. Moreover, the mapping between the
HWP performance levels and CPU frequency can be assumed to be
linear and such that HWP performance level 0 correspond to the
frequency value of 0, so it is only necessary to know the
frequency corresponding to one specific HWP performance level
to compute the scaling factor applicable to all of them.
One possibility is to take the nominal performance value from CPPC,
if available, and use cpu_khz as the corresponding frequency. If
the CPPC capabilities interface is not there or the nominal
performance value provided by it is out of range, though, something
else needs to be done.
Namely, the guaranteed performance level either from CPPC or from
MSR_HWP_CAPABILITIES can be used instead, but the corresponding
frequency needs to be determined. That can be done by computing the
product of the (known) scaling factor between the MSR_IA32_PERF_CTL
P-states and CPU frequency (the PERF_CTL scaling factor) and the
P-state value referred to as the "TDP ratio".
If the HWP-to-frequency scaling factor value obtained in one of the
ways above turns out to be euqal to the PERF_CTL scaling factor, it
can be assumed that the number of HWP performance levels is equal to
the number of P-states and the given CPU can be handled as though
this was not a hybrid processor.
Otherwise, one more adjustment may still need to be made, because the
HWP-to-frequency scaling factor computed so far may not be accurate
enough (e.g. because the CPPC information does not match the exact
behavior of the processor). Specifically, in that case the frequency
corresponding to the highest HWP performance value from
MSR_HWP_CAPABILITIES (computed as the product of that value and the
HWP-to-frequency scaling factor) cannot exceed the frequency that
corresponds to the maximum 1-core turbo P-state value from
MSR_TURBO_RATIO_LIMIT (computed as the procuct of that value and the
PERF_CTL scaling factor) and the HWP-to-frequency scaling factor may
need to be adjusted accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The turbo_pct and num_pstates sysfs attributes represent CPU
properties that may be different for differenty types of CPUs in
a hybrid processor, so avoid exposing them in that case.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
'ret' is known to be 0 here.
The last error code is stored in 'nr_opp', so use it in the error message.
Fixes: 71a37cd6a5 ("scmi-cpufreq: Remove deferred probe")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add compatible stirng for MediaTek MT8365 SoC. Add also the
compatible in the blacklist of the cpufreq-dt-platdev driver.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add SC7280 to cpufreq-dt-platdev blacklist since the actual scaling is
handled by the 'qcom-cpufreq-hw' driver.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Ggm4
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2021-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Fix an idle CPU selection bug, and an AMD Ryzen maximum frequency
enumeration bug"
* tag 'sched-urgent-2021-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, sched: Fix the AMD CPPC maximum performance value on certain AMD Ryzen generations
sched/fair: Fix clearing of has_idle_cores flag in select_idle_cpu()
Some AMD Ryzen generations has different calculation method on maximum
performance. 255 is not for all ASICs, some specific generations should use 166
as the maximum performance. Otherwise, it will report incorrect frequency value
like below:
~ → lscpu | grep MHz
CPU MHz: 3400.000
CPU max MHz: 7228.3198
CPU min MHz: 2200.0000
[ mingo: Tidied up whitespace use. ]
[ Alexander Monakov <amonakov@ispras.ru>: fix 225 -> 255 typo. ]
Fixes: 41ea667227 ("x86, sched: Calculate frequency invariance for AMD systems")
Fixes: 3c55e94c0a ("cpufreq: ACPI: Extend frequency tables to cover boost frequencies")
Reported-by: Jason Bagavatsingham <jason.bagavatsingham@gmail.com>
Fixed-by: Alexander Monakov <amonakov@ispras.ru>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Jason Bagavatsingham <jason.bagavatsingham@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210425073451.2557394-1-ray.huang@amd.com
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=211791
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It turns out that there are systems where HWP is enabled during
initialization by the platform firmware (BIOS), but HWP EPP support
is not advertised.
After commit 7aa1031223 ("cpufreq: intel_pstate: Avoid enabling HWP
if EPP is not supported") intel_pstate refuses to use HWP on those
systems, but the fallback PERF_CTL interface does not work on them
either because of enabled HWP, and once enabled, HWP cannot be
disabled. Consequently, the users of those systems cannot control
CPU performance scaling.
Address this issue by making intel_pstate use HWP unconditionally if
it is enabled already when the driver starts.
Fixes: 7aa1031223 ("cpufreq: intel_pstate: Avoid enabling HWP if EPP is not supported")
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 5.9+ <stable@vger.kernel.org> # 5.9+
- Add idle states table for IceLake-D to the intel_idle driver and
update IceLake-X C6 data in it (Artem Bityutskiy).
- Fix the C7 idle state on Tegra114 in the tegra cpuidle driver and
drop the unused do_idle() firmware call from it (Dmitry Osipenko).
- Fix cpuidle-qcom-spm Kconfig entry (He Ying).
- Fix handling of possible negative tick_nohz_get_next_hrtimer()
return values of in cpuidle governors (Rafael Wysocki).
- Add support for frequency-invariance to the ACPI CPPC cpufreq
driver and update the frequency-invariance engine (FIE) to use it
as needed (Viresh Kumar).
- Simplify the default delay_us setting in the ACPI CPPC cpufreq
driver (Tom Saeger).
- Clean up frequency-related computations in the intel_pstate
cpufreq driver (Rafael Wysocki).
- Fix TBG parent setting for load levels in the armada-37xx
cpufreq driver and drop the CPU PM clock .set_parent method for
armada-37xx (Marek Behún).
- Fix multiple issues in the armada-37xx cpufreq driver (Pali Rohár).
- Fix handling of dev_pm_opp_of_cpumask_add_table() return values
in cpufreq-dt to take the -EPROBE_DEFER one into acconut as
appropriate (Quanyang Wang).
- Fix format string in ia64-acpi-cpufreq (Sergei Trofimovich).
- Drop the unused for_each_policy() macro from cpufreq (Shaokun
Zhang).
- Simplify computations in the schedutil cpufreq governor to avoid
unnecessary overhead (Yue Hu).
- Fix typos in the s5pv210 cpufreq driver (Bhaskar Chowdhury).
- Fix cpufreq documentation links in Kconfig (Alexander Monakov).
- Fix PCI device power state handling in pci_enable_device_flags()
to avoid issuse in some cases when the device depends on an ACPI
power resource (Rafael Wysocki).
- Add missing documentation of pm_runtime_resume_and_get() (Alan
Stern).
- Add missing static inline stub for pm_runtime_has_no_callbacks()
to pm_runtime.h and drop the unused try_to_freeze_nowarn()
definition (YueHaibing).
- Drop duplicate struct device declaration from pm.h and fix a
structure type declaration in intel_rapl.h (Wan Jiabing).
- Use dev_set_name() instead of an open-coded equivalent of it in
the wakeup sources code and drop a redundant local variable
initialization from it (Andy Shevchenko, Colin Ian King).
- Use crc32 instead of md5 for e820 memory map integrity check
during resume from hibernation on x86 (Chris von Recklinghausen).
- Fix typos in comments in the system-wide and hibernation support
code (Lu Jialin).
- Modify the generic power domains (genpd) code to avoid resuming
devices in the "prepare" phase of system-wide suspend and
hibernation (Ulf Hansson).
- Add Hygon Fam18h RAPL support to the intel_rapl power capping
driver (Pu Wen).
- Add MAINTAINERS entry for the dynamic thermal power management
(DTPM) code (Daniel Lezcano).
- Add devm variants of operating performance points (OPP) API
functions and switch over some users of the OPP framework to
the new resource-managed API (Yangtao Li and Dmitry Osipenko).
- Update devfreq core:
* Register devfreq devices as cooling devices on demand (Daniel
Lezcano).
* Add missing unlock opeation in devfreq_add_device() (Lukasz
Luba).
* Use the next frequency as resume_freq instead of the previous
frequency when using the opp-suspend property (Dong Aisheng).
* Check get_dev_status in devfreq_update_stats() (Dong Aisheng).
* Fix set_freq path for the userspace governor in Kconfig (Dong
Aisheng).
* Remove invalid description of get_target_freq() (Dong Aisheng).
- Update devfreq drivers:
* imx8m-ddrc: Remove imx8m_ddrc_get_dev_status() and unneeded
of_match_ptr() (Dong Aisheng, Fabio Estevam).
* rk3399_dmc: dt-bindings: Add rockchip,pmu phandle and drop
references to undefined symbols (Enric Balletbo i Serra, Gaël
PORTAY).
* rk3399_dmc: Use dev_err_probe() to simplify the code (Krzysztof
Kozlowski).
* imx-bus: Remove unneeded of_match_ptr() (Fabio Estevam).
- Fix kernel-doc warnings in three places (Pierre-Louis Bossart).
- Fix typo in the pm-graph utility code (Ricardo Ribalda).
-----BEGIN PGP SIGNATURE-----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=t+SG
-----END PGP SIGNATURE-----
Merge tag 'pm-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add some new hardware support (for example, IceLake-D idle
states in intel_idle), fix some issues (for example, the handling of
negative "sleep length" values in cpuidle governors), add new
functionality to the existing drivers (for example, scale-invariance
support in the ACPI CPPC cpufreq driver) and clean up code all over.
Specifics:
- Add idle states table for IceLake-D to the intel_idle driver and
update IceLake-X C6 data in it (Artem Bityutskiy).
- Fix the C7 idle state on Tegra114 in the tegra cpuidle driver and
drop the unused do_idle() firmware call from it (Dmitry Osipenko).
- Fix cpuidle-qcom-spm Kconfig entry (He Ying).
- Fix handling of possible negative tick_nohz_get_next_hrtimer()
return values of in cpuidle governors (Rafael Wysocki).
- Add support for frequency-invariance to the ACPI CPPC cpufreq
driver and update the frequency-invariance engine (FIE) to use it
as needed (Viresh Kumar).
- Simplify the default delay_us setting in the ACPI CPPC cpufreq
driver (Tom Saeger).
- Clean up frequency-related computations in the intel_pstate cpufreq
driver (Rafael Wysocki).
- Fix TBG parent setting for load levels in the armada-37xx cpufreq
driver and drop the CPU PM clock .set_parent method for armada-37xx
(Marek Behún).
- Fix multiple issues in the armada-37xx cpufreq driver (Pali Rohár).
- Fix handling of dev_pm_opp_of_cpumask_add_table() return values in
cpufreq-dt to take the -EPROBE_DEFER one into acconut as
appropriate (Quanyang Wang).
- Fix format string in ia64-acpi-cpufreq (Sergei Trofimovich).
- Drop the unused for_each_policy() macro from cpufreq (Shaokun
Zhang).
- Simplify computations in the schedutil cpufreq governor to avoid
unnecessary overhead (Yue Hu).
- Fix typos in the s5pv210 cpufreq driver (Bhaskar Chowdhury).
- Fix cpufreq documentation links in Kconfig (Alexander Monakov).
- Fix PCI device power state handling in pci_enable_device_flags() to
avoid issuse in some cases when the device depends on an ACPI power
resource (Rafael Wysocki).
- Add missing documentation of pm_runtime_resume_and_get() (Alan
Stern).
- Add missing static inline stub for pm_runtime_has_no_callbacks() to
pm_runtime.h and drop the unused try_to_freeze_nowarn() definition
(YueHaibing).
- Drop duplicate struct device declaration from pm.h and fix a
structure type declaration in intel_rapl.h (Wan Jiabing).
- Use dev_set_name() instead of an open-coded equivalent of it in the
wakeup sources code and drop a redundant local variable
initialization from it (Andy Shevchenko, Colin Ian King).
- Use crc32 instead of md5 for e820 memory map integrity check during
resume from hibernation on x86 (Chris von Recklinghausen).
- Fix typos in comments in the system-wide and hibernation support
code (Lu Jialin).
- Modify the generic power domains (genpd) code to avoid resuming
devices in the "prepare" phase of system-wide suspend and
hibernation (Ulf Hansson).
- Add Hygon Fam18h RAPL support to the intel_rapl power capping
driver (Pu Wen).
- Add MAINTAINERS entry for the dynamic thermal power management
(DTPM) code (Daniel Lezcano).
- Add devm variants of operating performance points (OPP) API
functions and switch over some users of the OPP framework to the
new resource-managed API (Yangtao Li and Dmitry Osipenko).
- Update devfreq core:
* Register devfreq devices as cooling devices on demand (Daniel
Lezcano).
* Add missing unlock opeation in devfreq_add_device() (Lukasz
Luba).
* Use the next frequency as resume_freq instead of the previous
frequency when using the opp-suspend property (Dong Aisheng).
* Check get_dev_status in devfreq_update_stats() (Dong Aisheng).
* Fix set_freq path for the userspace governor in Kconfig (Dong
Aisheng).
* Remove invalid description of get_target_freq() (Dong Aisheng).
- Update devfreq drivers:
* imx8m-ddrc: Remove imx8m_ddrc_get_dev_status() and unneeded
of_match_ptr() (Dong Aisheng, Fabio Estevam).
* rk3399_dmc: dt-bindings: Add rockchip,pmu phandle and drop
references to undefined symbols (Enric Balletbo i Serra, Gaël
PORTAY).
* rk3399_dmc: Use dev_err_probe() to simplify the code (Krzysztof
Kozlowski).
* imx-bus: Remove unneeded of_match_ptr() (Fabio Estevam).
- Fix kernel-doc warnings in three places (Pierre-Louis Bossart).
- Fix typo in the pm-graph utility code (Ricardo Ribalda)"
* tag 'pm-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits)
PM: wakeup: remove redundant assignment to variable retval
PM: hibernate: x86: Use crc32 instead of md5 for hibernation e820 integrity check
cpufreq: Kconfig: fix documentation links
PM: wakeup: use dev_set_name() directly
PM: runtime: Add documentation for pm_runtime_resume_and_get()
cpufreq: intel_pstate: Simplify intel_pstate_update_perf_limits()
cpufreq: armada-37xx: Fix module unloading
cpufreq: armada-37xx: Remove cur_frequency variable
cpufreq: armada-37xx: Fix determining base CPU frequency
cpufreq: armada-37xx: Fix driver cleanup when registration failed
clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1 to L0
clk: mvebu: armada-37xx-periph: Fix switching CPU freq from 250 Mhz to 1 GHz
cpufreq: armada-37xx: Fix the AVS value for load L1
clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM clock
cpufreq: armada-37xx: Fix setting TBG parent for load levels
cpuidle: Fix ARM_QCOM_SPM_CPUIDLE configuration
cpuidle: tegra: Remove do_idle firmware call
cpuidle: tegra: Fix C7 idling state on Tegra114
PM: sleep: fix typos in comments
cpufreq: Remove unused for_each_policy macro
...
Updates for SoC specific drivers include a few subsystems that
have their own maintainers but send them through the soc tree:
TEE/OP-TEE:
- Add tracepoints around calls to secure world
Memory controller drivers:
- Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
- Add debug statistics to Tegra20 memory controller
- Update Tegra bindings and convert to dtschema
ARM SCMI Firmware:
- Support for modular SCMI protocols and vendor specific extensions
- New SCMI IIO driver
- Per-cpu DVFS
The other driver changes are all from the platform maintainers
directly and reflect the drivers that don't fit into any other
subsystem as well as treewide changes for a particular platform.
SoCFPGA:
- Various cleanups contributed by Krzysztof Kozlowski
Mediatek:
- add MT8183 support to mutex driver
- MMSYS: use per SoC array to describe the possible routing
- add MMSYS support for MT8183 and MT8167
- add support for PMIC wrapper with integrated arbiter
- add support for MT8192/MT6873
Tegra:
- Bug fixes to PMC and clock drivers
NXP/i.MX:
- Update SCU power domain driver to keep console domain power on.
- Add missing ADC1 power domain to SCU power domain driver.
- Update comments for single global power domain in SCU power domain
driver.
- Add i.MX51/i.MX53 unique id support to i.MX SoC driver.
NXP/FSL SoC driver updates for v5.13
- Add ACPI support for RCPM driver
- Use generic io{read,write} for QE drivers after performance optimized
for PowerPC
- Fix QBMAN probe to cleanup HW states correctly for kexec
- Various cleanup and style fix for QBMAN/QE/GUTS drivers
OMAP:
- Preparation to use devicetree for genpd
- ti-sysc needs iorange check improved when the interconnect target module
has no control registers listed
- ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to avoid
issues with missing resources and unnecessary deferred probe
- ti-sysc debug option can now detect more devices
- ti-sysc now warns if an old incomplete devicetree data is found as we
now rely on it being complete for am3 and 4
- soc init code needs to check for prcm and prm nodes for omap4/5 and dra7
- omap-prm driver needs to enable autoidle retention support for omap4
- omap5 clocks are missing gpmc and ocmc clock registers
- pci-dra7xx now needs to use builtin_platform_driver instead of using
builtin_platform_driver_probe for deferred probe to work
Raspberry Pi:
- Fix-up all RPi firmware drivers so as for unbind to happen in an
orderly fashion
- Support for RPi's PoE hat PWM bus
Qualcomm
- Improved detection for SCM calling conventions
- Support for OEM specific wifi firmware path
- Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=iidq
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"Updates for SoC specific drivers include a few subsystems that have
their own maintainers but send them through the soc tree:
TEE/OP-TEE:
- Add tracepoints around calls to secure world
Memory controller drivers:
- Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
- Add debug statistics to Tegra20 memory controller
- Update Tegra bindings and convert to dtschema
ARM SCMI Firmware:
- Support for modular SCMI protocols and vendor specific extensions
- New SCMI IIO driver
- Per-cpu DVFS
The other driver changes are all from the platform maintainers
directly and reflect the drivers that don't fit into any other
subsystem as well as treewide changes for a particular platform.
SoCFPGA:
- Various cleanups contributed by Krzysztof Kozlowski
Mediatek:
- add MT8183 support to mutex driver
- MMSYS: use per SoC array to describe the possible routing
- add MMSYS support for MT8183 and MT8167
- add support for PMIC wrapper with integrated arbiter
- add support for MT8192/MT6873
Tegra:
- Bug fixes to PMC and clock drivers
NXP/i.MX:
- Update SCU power domain driver to keep console domain power on.
- Add missing ADC1 power domain to SCU power domain driver.
- Update comments for single global power domain in SCU power domain
driver.
- Add i.MX51/i.MX53 unique id support to i.MX SoC driver.
NXP/FSL SoC driver updates for v5.13
- Add ACPI support for RCPM driver
- Use generic io{read,write} for QE drivers after performance
optimized for PowerPC
- Fix QBMAN probe to cleanup HW states correctly for kexec
- Various cleanup and style fix for QBMAN/QE/GUTS drivers
OMAP:
- Preparation to use devicetree for genpd
- ti-sysc needs iorange check improved when the interconnect target
module has no control registers listed
- ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to
avoid issues with missing resources and unnecessary deferred probe
- ti-sysc debug option can now detect more devices
- ti-sysc now warns if an old incomplete devicetree data is found as
we now rely on it being complete for am3 and 4
- soc init code needs to check for prcm and prm nodes for omap4/5 and
dra7
- omap-prm driver needs to enable autoidle retention support for
omap4
- omap5 clocks are missing gpmc and ocmc clock registers
- pci-dra7xx now needs to use builtin_platform_driver instead of
using builtin_platform_driver_probe for deferred probe to work
Raspberry Pi:
- Fix-up all RPi firmware drivers so as for unbind to happen in an
orderly fashion
- Support for RPi's PoE hat PWM bus
Qualcomm
- Improved detection for SCM calling conventions
- Support for OEM specific wifi firmware path
- Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP"
* tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
soc: aspeed: fix a ternary sign expansion bug
memory: mtk-smi: Add device-link between smi-larb and smi-common
memory: samsung: exynos5422-dmc: handle clk_set_parent() failure
memory: renesas-rpc-if: fix possible NULL pointer dereference of resource
clk: socfpga: fix iomem pointer cast on 64-bit
soc: aspeed: Adapt to new LPC device tree layout
pinctrl: aspeed-g5: Adapt to new LPC device tree layout
ipmi: kcs: aspeed: Adapt to new LPC DTS layout
ARM: dts: Remove LPC BMC and Host partitions
dt-bindings: aspeed-lpc: Remove LPC partitioning
soc: fsl: enable acpi support in RCPM driver
soc: qcom: mdt_loader: Detect truncated read of segments
soc: qcom: mdt_loader: Validate that p_filesz < p_memsz
soc: qcom: pdr: Fix error return code in pdr_register_listener
firmware: qcom_scm: Fix kernel-doc function names to match
firmware: qcom_scm: Suppress sysfs bind attributes
firmware: qcom_scm: Workaround lack of "is available" call on SC7180
firmware: qcom_scm: Reduce locking section for __get_convention()
firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool
Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers"
...
User documentation for cpufreq governors and drivers has been moved to
admin-guide; adjust references from Kconfig entries accordingly.
Remove references from undocumented cpufreq drivers, as well as the
'userspace' cpufreq governor, for which no additional details are
provided in the admin-guide text.
Fixes: 2a0e492798 ("cpufreq: User/admin documentation update and consolidation")
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull ARM cpufreq updates for v5.13 from Viresh Kumar:
"- Fix typos in s5pv210 cpufreq driver (Bhaskar Chowdhury).
- Armada 37xx: Fix cpufreq changing base CPU speed to 800 MHz from
1000 MHz (Pali Rohár and Marek Behún).
- cpufreq-dt: Return -EPROBE_DEFER on failure to add table (Quanyang
Wang).
- Minor cleanup in cppc driver (Tom Saeger).
- Add frequency invariance support for CPPC driver and generalize
freq invariance support arch-topology driver (Viresh Kumar)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: armada-37xx: Fix module unloading
cpufreq: armada-37xx: Remove cur_frequency variable
cpufreq: armada-37xx: Fix determining base CPU frequency
cpufreq: armada-37xx: Fix driver cleanup when registration failed
clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1 to L0
clk: mvebu: armada-37xx-periph: Fix switching CPU freq from 250 Mhz to 1 GHz
cpufreq: armada-37xx: Fix the AVS value for load L1
clk: mvebu: armada-37xx-periph: remove .set_parent method for CPU PM clock
cpufreq: armada-37xx: Fix setting TBG parent for load levels
cpufreq: dt: dev_pm_opp_of_cpumask_add_table() may return -EPROBE_DEFER
cpufreq: cppc: simplify default delay_us setting
cpufreq: Rudimentary typos fix in the file s5pv210-cpufreq.c
cpufreq: CPPC: Add support for frequency invariance
arch_topology: Export arch_freq_scale and helpers
arch_topology: Allow multiple entities to provide sched_freq_tick() callback
arch_topology: Rename freq_scale as arch_freq_scale
Because pstate.max_freq is always equal to the product of
pstate.max_pstate and pstate.scaling and, analogously,
pstate.turbo_freq is always equal to the product of
pstate.turbo_pstate and pstate.scaling, the result of the
max_policy_perf computation in intel_pstate_update_perf_limits() is
always equal to the quotient of policy_max and pstate.scaling,
regardless of whether or not turbo is disabled. Analogously, the
result of min_policy_perf in intel_pstate_update_perf_limits() is
always equal to the quotient of policy_min and pstate.scaling.
Accordingly, intel_pstate_update_perf_limits() need not check
whether or not turbo is enabled at all and in order to compute
max_policy_perf and min_policy_perf it can always divide policy_max
and policy_min, respectively, by pstate.scaling. Make it do so.
While at it, move the definition and initialization of the
turbo_max local variable to the code branch using it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
This driver is missing module_exit hook. Add proper driver exit function
which unregisters the platform device and cleans up the data.
Signed-off-by: Pali Rohár <pali@kernel.org>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tested-by: Anders Trier Olesen <anders.trier.olesen@gmail.com>
Tested-by: Philip Soares <philips@netisense.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
When current CPU load is not L0 then loading armada-37xx-cpufreq.ko driver
fails with following error:
# modprobe armada-37xx-cpufreq
[ 502.702097] Unsupported CPU frequency 250 MHz
This issue was partially fixed by commit 8db8256345 ("cpufreq:
armada-37xx: fix frequency calculation for opp"), but only for calculating
CPU frequency for opp.
Fix this also for determination of base CPU frequency.
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tested-by: Anders Trier Olesen <anders.trier.olesen@gmail.com>
Tested-by: Philip Soares <philips@netisense.com>
Fixes: 92ce45fb87 ("cpufreq: Add DVFS support for Armada 37xx")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Commit 8db8256345 ("cpufreq: armada-37xx: fix frequency calculation for
opp") changed calculation of frequency passed to the dev_pm_opp_add()
function call. But the code for dev_pm_opp_remove() function call was not
updated, so the driver cleanup phase does not work when registration fails.
This fixes the issue by using the same frequency in both calls.
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tested-by: Anders Trier Olesen <anders.trier.olesen@gmail.com>
Tested-by: Philip Soares <philips@netisense.com>
Fixes: 8db8256345 ("cpufreq: armada-37xx: fix frequency calculation for opp")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The original CPU voltage value for load L1 is too low for Armada 37xx SoC
when base CPU frequency is 1000 or 1200 MHz. It leads to instabilities
where CPU gets stuck soon after dynamic voltage scaling from load L1 to L0.
Update the CPU voltage value for load L1 accordingly when base frequency is
1000 or 1200 MHz. The minimal L1 value for base CPU frequency 1000 MHz is
updated from the original 1.05V to 1.108V and for 1200 MHz is updated to
1.155V. This minimal L1 value is used only in the case when it is lower
than value for L0.
This change fixes CPU instability issues on 1 GHz and 1.2 GHz variants of
Espressobin and 1 GHz Turris Mox.
Marvell previously for 1 GHz variant of Espressobin provided a patch [1]
suitable only for their Marvell Linux kernel 4.4 fork which workarounded
this issue. Patch forced CPU voltage value to 1.108V in all loads. But
such change does not fix CPU instability issues on 1.2 GHz variants of
Armada 3720 SoC.
During testing we come to the conclusion that using 1.108V as minimal
value for L1 load makes 1 GHz variants of Espressobin and Turris Mox boards
stable. And similarly 1.155V for 1.2 GHz variant of Espressobin.
These two values 1.108V and 1.155V are documented in Armada 3700 Hardware
Specifications as typical initial CPU voltage values.
Discussion about this issue is also at the Armbian forum [2].
[1] - dc33b62c90
[2] - https://forum.armbian.com/topic/10429-how-to-make-espressobin-v7-stable/
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tested-by: Anders Trier Olesen <anders.trier.olesen@gmail.com>
Tested-by: Philip Soares <philips@netisense.com>
Fixes: 1c3528232f ("cpufreq: armada-37xx: Add AVS support")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
With CPU frequency determining software [1] we have discovered that
after this driver does one CPU frequency change, the base frequency of
the CPU is set to the frequency of TBG-A-P clock, instead of the TBG
that is parent to the CPU.
This can be reproduced on EspressoBIN and Turris MOX:
cd /sys/devices/system/cpu/cpufreq/policy0
echo powersave >scaling_governor
echo performance >scaling_governor
Running the mhz tool before this driver is loaded reports 1000 MHz, and
after loading the driver and executing commands above the tool reports
800 MHz.
The change of TBG clock selector is supposed to happen in function
armada37xx_cpufreq_dvfs_setup. Before the function returns, it does
this:
parent = clk_get_parent(clk);
clk_set_parent(clk, parent);
The armada-37xx-periph clock driver has the .set_parent method
implemented correctly for this, so if the method was actually called,
this would work. But since the introduction of the common clock
framework in commit b2476490ef ("clk: introduce the common clock..."),
the clk_set_parent function checks whether the parent is actually
changing, and if the requested new parent is same as the old parent
(which is obviously the case for the code above), the .set_parent method
is not called at all.
This patch fixes this issue by filling the correct TBG clock selector
directly in the armada37xx_cpufreq_dvfs_setup during the filling of
other registers at the same address. But the determination of CPU TBG
index cannot be done via the common clock framework, therefore we need
to access the North Bridge Peripheral Clock registers directly in this
driver.
[1] https://github.com/wtarreau/mhz
Signed-off-by: Marek Behún <kabel@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Pali Rohár <pali@kernel.org>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tested-by: Anders Trier Olesen <anders.trier.olesen@gmail.com>
Tested-by: Philip Soares <philips@netisense.com>
Fixes: 92ce45fb87 ("cpufreq: Add DVFS support for Armada 37xx")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Macro 'for_each_policy' has become unused since commit
f963735a3c ("cpufreq: Create for_each_{in}active_policy()"), so
remove it.
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Port driver to the new SCMI perf interface based on protocol handles
and common devm_get_ops().
Link: https://lore.kernel.org/r/20210316124903.35011-13-cristian.marussi@arm.com
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The function names in the comment blocks for the functions
scaling_available_frequencies_show() and
scaling_boost_frequencies_show() do not match the actual names.
Fixes: 6f19efc0a1 ("cpufreq: Add boost frequency support in core")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The function dev_pm_opp_of_cpumask_add_table() may return -EPROBE_DEFER,
which needs to be propagated to the caller to try probing the driver
later on.
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
[ Viresh: Massage changelog/subject, improve code. ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Notice that some computations related to frequency in intel_pstate
can be simplified if (a) intel_pstate_get_hwp_max() updates the
relevant members of struct cpudata by itself and (b) the "turbo
disabled" check is moved from it to its callers, so modify the code
accordingly and while at it rename intel_pstate_get_hwp_max() to
intel_pstate_get_hwp_cap() which better reflects its purpose and
provide a simplified variat of it, __intel_pstate_get_hwp_cap(),
suitable for the initialization path.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Simplify case when setting default in cppc_cpufreq_get_transition_delay_us.
Signed-off-by: Tom Saeger <tom.saeger@oracle.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The Frequency Invariance Engine (FIE) is providing a frequency scaling
correction factor that helps achieve more accurate load-tracking.
Normally, this scaling factor can be obtained directly with the help of
the cpufreq drivers as they know the exact frequency the hardware is
running at. But that isn't the case for CPPC cpufreq driver.
Another way of obtaining that is using the arch specific counter
support, which is already present in kernel, but that hardware is
optional for platforms.
This patch updates the CPPC driver to register itself with the topology
core to provide its own implementation (cppc_scale_freq_tick()) of
topology_scale_freq_tick() which gets called by the scheduler on every
tick. Note that the arch specific counters have higher priority than
CPPC counters, if available, though the CPPC driver doesn't need to have
any special handling for that.
On an invocation of cppc_scale_freq_tick(), we schedule an irq work
(since we reach here from hard-irq context), which then schedules a
normal work item and cppc_scale_freq_workfn() updates the per_cpu
arch_freq_scale variable based on the counter updates since the last
tick.
To allow platforms to disable this CPPC counter-based frequency
invariance support, this is all done under CONFIG_ACPI_CPPC_CPUFREQ_FIE,
which is enabled by default.
This also exports sched_setattr_nocheck() as the CPPC driver can be
built as a module.
Cc: linux-acpi@vger.kernel.org
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Fix warning with %lx / s64 mismatch:
CC [M] drivers/cpufreq/ia64-acpi-cpufreq.o
drivers/cpufreq/ia64-acpi-cpufreq.c: In function 'processor_get_pstate':
warning: format '%lx' expects argument of type 'long unsigned int',
but argument 3 has type 's64' {aka 'long long int'} [-Wformat=]
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
By design, SCMI performance domains define the granularity of
performance controls, they do not describe any underlying hardware
dependencies (although they may match in many cases).
It is therefore possible to have some platforms where hardware may have
the ability to control CPU performance at different granularity and choose
to describe fine-grained performance control through SCMI.
In such situations, the energy model would be provided with inaccurate
information based on controls, while it still needs to know the
performance boundaries.
To restore correct functionality, retrieve information of CPUs under the
same performance domain from operating-points-v2 in DT, and pass it on to
EM.
Link: https://lore.kernel.org/r/20210218222326.15788-3-nicola.mazzucato@arm.com
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Nicola Mazzucato <nicola.mazzucato@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The current implementation of the scmi_cpufreq_init() function returns
-EPROBE_DEFER when the OPP table is not populated. In practice the
cpufreq core cannot handle this error code.
Therefore, fix the return value and clarify the error message.
Link: https://lore.kernel.org/r/20210218222326.15788-2-nicola.mazzucato@arm.com
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Nicola Mazzucato <nicola.mazzucato@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add "arm,vexpress" to cpufreq-dt-platdev blacklist since the actual
scaling is handled by the firmware cpufreq drivers(scpi, scmi and
vexpress-spc).
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
In case of error, the function ioremap() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.
Fixes: 67fc209b52 ("cpufreq: qcom-hw: drop devm_xxx() calls from init/exit hooks")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Drop support for depercated platforms using SFI, drop the entire
support for SFI that has been long deprecated too and make some
janitorial changes on top of that (Andy Shevchenko).
-----BEGIN PGP SIGNATURE-----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=jlPz
-----END PGP SIGNATURE-----
Merge tag 'sfi-removal-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull Simple Firmware Interface (SFI) support removal from Rafael Wysocki:
"Drop support for depercated platforms using SFI, drop the entire
support for SFI that has been long deprecated too and make some
janitorial changes on top of that (Andy Shevchenko)"
* tag 'sfi-removal-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
x86/platform/intel-mid: Update Copyright year and drop file names
x86/platform/intel-mid: Remove unused header inclusion in intel-mid.h
x86/platform/intel-mid: Drop unused __intel_mid_cpu_chip and Co.
x86/platform/intel-mid: Get rid of intel_scu_ipc_legacy.h
x86/PCI: Describe @reg for type1_access_ok()
x86/PCI: Get rid of custom x86 model comparison
sfi: Remove framework for deprecated firmware
cpufreq: sfi-cpufreq: Remove driver for deprecated firmware
media: atomisp: Remove unused header
mfd: intel_msic: Remove driver for deprecated platform
x86/apb_timer: Remove driver for deprecated platform
x86/platform/intel-mid: Remove unused leftovers (vRTC)
x86/platform/intel-mid: Remove unused leftovers (msic)
x86/platform/intel-mid: Remove unused leftovers (msic_thermal)
x86/platform/intel-mid: Remove unused leftovers (msic_power_btn)
x86/platform/intel-mid: Remove unused leftovers (msic_gpio)
x86/platform/intel-mid: Remove unused leftovers (msic_battery)
x86/platform/intel-mid: Remove unused leftovers (msic_ocd)
x86/platform/intel-mid: Remove unused leftovers (msic_audio)
platform/x86: intel_scu_wdt: Drop mistakenly added const
* pm-cpufreq:
cpufreq: Fix typo in kerneldoc comment
cpufreq: schedutil: Remove update_lock comment from struct sugov_policy definition
cpufreq: schedutil: Remove needless sg_policy parameter from ignore_dl_rate_limit()
cpufreq: ACPI: Set cpuinfo.max_freq directly if max boost is known
cpufreq: qcom-hw: drop devm_xxx() calls from init/exit hooks
* pm-opp:
opp: Don't skip freq update for different frequency
Change 'Terget' to 'Target'.
Should be Target.
Signed-off-by: Yue Hu <huyue2@yulong.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull ARM cpufreq fix for 5.12 from Viresh Kumar:
"Single patch to fix issue with cpu hotplug and policy recreation for
qcom-cpufreq-hw driver."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: qcom-hw: drop devm_xxx() calls from init/exit hooks
Commit 3c55e94c0a ("cpufreq: ACPI: Extend frequency tables to cover
boost frequencies") attempted to address a performance issue involving
acpi-cpufreq, the schedutil governor and scale-invariance on x86 by
extending the frequency tables created by acpi-cpufreq to cover the
entire range of "turbo" (or "boost") frequencies, but that caused
frequencies reported via /proc/cpuinfo and the scaling_cur_freq
attribute in sysfs to change which may confuse users and monitoring
tools.
For this reason, revert the part of commit 3c55e94c0a adding the
extra entry to the frequency table and use the observation that
in principle cpuinfo.max_freq need not be equal to the maximum
frequency listed in the frequency table for the given policy.
Namely, modify cpufreq_frequency_table_cpuinfo() to allow cpufreq
drivers to set their own cpuinfo.max_freq above that frequency and
change acpi-cpufreq to set cpuinfo.max_freq to the maximum boost
frequency found via CPPC.
This should be sufficient to let all of the cpufreq subsystem know
the real maximum frequency of the CPU without changing frequency
reporting.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=211305
Fixes: 3c55e94c0a ("cpufreq: ACPI: Extend frequency tables to cover boost frequencies")
Reported-by: Matt McDonald <gardotd426@gmail.com>
Tested-by: Matt McDonald <gardotd426@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Tested-by: Michael Larabel <Michael@phoronix.com>
Cc: 5.11+ <stable@vger.kernel.org> # 5.11+
Commit f17b3e4432 ("cpufreq: qcom-hw: Use
devm_platform_ioremap_resource() to simplify code") introduces
a regression on platforms using the driver, by failing to initialise
a policy, when one is created post hotplug.
When all the CPUs of a policy are hoptplugged out, the call to .exit()
and later to devm_iounmap() does not release the memory region that was
requested during devm_platform_ioremap_resource(). Therefore,
a subsequent call to .init() will result in the following error, which
will prevent a new policy to be initialised:
[ 3395.915416] CPU4: shutdown
[ 3395.938185] psci: CPU4 killed (polled 0 ms)
[ 3399.071424] CPU5: shutdown
[ 3399.094316] psci: CPU5 killed (polled 0 ms)
[ 3402.139358] CPU6: shutdown
[ 3402.161705] psci: CPU6 killed (polled 0 ms)
[ 3404.742939] CPU7: shutdown
[ 3404.765592] psci: CPU7 killed (polled 0 ms)
[ 3411.492274] Detected VIPT I-cache on CPU4
[ 3411.492337] GICv3: CPU4: found redistributor 400 region 0:0x0000000017ae0000
[ 3411.492448] CPU4: Booted secondary processor 0x0000000400 [0x516f802d]
[ 3411.503654] qcom-cpufreq-hw 17d43000.cpufreq: can't request region for resource [mem 0x17d45800-0x17d46bff]
With that being said, the original code was tricky and skipping memory
region request intentionally to hide this issue. The true cause is that
those devm_xxx() device managed functions shouldn't be used for cpufreq
init/exit hooks, because &pdev->dev is alive across the hooks and will
not trigger auto resource free-up. Let's drop the use of device managed
functions and manually allocate/free resources, so that the issue can be
fixed properly.
Cc: v5.10+ <stable@vger.kernel.org> # v5.10+
Fixes: f17b3e4432 ("cpufreq: qcom-hw: Use devm_platform_ioremap_resource() to simplify code")
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
SFI-based platforms are gone. So does this driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* pm-opp: (37 commits)
PM / devfreq: Add required OPPs support to passive governor
PM / devfreq: Cache OPP table reference in devfreq
OPP: Add function to look up required OPP's for a given OPP
opp: Replace ENOTSUPP with EOPNOTSUPP
opp: Fix "foo * bar" should be "foo *bar"
opp: Don't ignore clk_get() errors other than -ENOENT
opp: Update bandwidth requirements based on scaling up/down
opp: Allow lazy-linking of required-opps
opp: Remove dev_pm_opp_set_bw()
devfreq: tegra30: Migrate to dev_pm_opp_set_opp()
drm: msm: Migrate to dev_pm_opp_set_opp()
cpufreq: qcom: Migrate to dev_pm_opp_set_opp()
opp: Implement dev_pm_opp_set_opp()
opp: Update parameters of _set_opp_custom()
opp: Allow _generic_set_opp_clk_only() to work for non-freq devices
opp: Allow _generic_set_opp_regulator() to work for non-freq devices
opp: Allow _set_opp() to work for non-freq devices
opp: Split _set_opp() out of dev_pm_opp_set_rate()
opp: Keep track of currently programmed OPP
opp: No need to check clk for errors
...
Pull ARM cpufreq changes for v5.12 from Viresh Kumar:
"- Removal of Tango driver as the platform got removed (Arnd Bergmann).
- Use resource managed APIs for tegra20 (Dmitry Osipenko).
- Generic cleanups for brcmstb (Christophe JAILLET).
- Enable boost support for qcom-hw (Shawn Guo)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: remove tango driver
cpufreq: brcmstb-avs-cpufreq: Fix resource leaks in ->remove()
cpufreq: brcmstb-avs-cpufreq: Free resources in error path
cpufreq: qcom-hw: enable boost support
cpufreq: tegra20: Use resource-managed API
If the maximum performance level taken for computing the
arch_max_freq_ratio value used in the x86 scale-invariance code is
higher than the one corresponding to the cpuinfo.max_freq value
coming from the acpi_cpufreq driver, the scale-invariant utilization
falls below 100% even if the CPU runs at cpuinfo.max_freq or slightly
faster, which causes the schedutil governor to select a frequency
below cpuinfo.max_freq. That frequency corresponds to a frequency
table entry below the maximum performance level necessary to get to
the "boost" range of CPU frequencies which prevents "boost"
frequencies from being used in some workloads.
While this issue is related to scale-invariance, it may be amplified
by commit db865272d9 ("cpufreq: Avoid configuring old governors as
default with intel_pstate") from the 5.10 development cycle which
made it extremely easy to default to schedutil even if the preferred
driver is acpi_cpufreq as long as intel_pstate is built too, because
the mere presence of the latter effectively removes the ondemand
governor from the defaults. Distro kernels are likely to include
both intel_pstate and acpi_cpufreq on x86, so their users who cannot
use intel_pstate or choose to use acpi_cpufreq may easily be
affectecd by this issue.
If CPPC is available, it can be used to address this issue by
extending the frequency tables created by acpi_cpufreq to cover the
entire available frequency range (including "boost" frequencies) for
each CPU, but if CPPC is not there, acpi_cpufreq has no idea what
the maximum "boost" frequency is and the frequency tables created by
it cannot be extended in a meaningful way, so in that case make it
ask the arch scale-invariance code to to use the "nominal" performance
level for CPU utilization scaling in order to avoid the issue at hand.
Fixes: db865272d9 ("cpufreq: Avoid configuring old governors as default with intel_pstate")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
A severe performance regression on AMD EPYC processors when using
the schedutil scaling governor was discovered by Phoronix.com and
attributed to the following commits:
41ea667227 ("x86, sched: Calculate frequency invariance for AMD
systems")
976df7e573 ("x86, sched: Use midpoint of max_boost and max_P for
frequency invariance on AMD EPYC")
The source of the problem is that the maximum performance level taken
for computing the arch_max_freq_ratio value used in the x86 scale-
invariance code is higher than the one corresponding to the
cpuinfo.max_freq value coming from the acpi_cpufreq driver.
This effectively causes the scale-invariant utilization to fall below
100% even if the CPU runs at cpuinfo.max_freq or slightly faster, so
the schedutil governor selects a frequency below cpuinfo.max_freq
then. That frequency corresponds to a frequency table entry below
the maximum performance level necessary to get to the "boost" range
of CPU frequencies.
However, if the cpuinfo.max_freq value coming from acpi_cpufreq was
higher, the schedutil governor would select higher frequencies which
in turn would allow acpi_cpufreq to set more adequate performance
levels and to get to the "boost" range of CPU frequencies more often.
This issue affects any systems where acpi_cpufreq is used and the
"boost" (or "turbo") frequencies are enabled, not just AMD EPYC.
Moreover, commit db865272d9 ("cpufreq: Avoid configuring old
governors as default with intel_pstate") from the 5.10 development
cycle made it extremely easy to default to schedutil even if the
preferred driver is acpi_cpufreq as long as intel_pstate is built
too, because the mere presence of the latter effectively removes the
ondemand governor from the defaults. Distro kernels are likely to
include both intel_pstate and acpi_cpufreq on x86, so their users
who cannot use intel_pstate or choose to use acpi_cpufreq may
easily be affectecd by this issue.
To address this issue, extend the frequency table constructed by
acpi_cpufreq for each CPU to cover the entire range of available
frequencies (including the "boost" ones) if CPPC is available and
indicates that "boost" (or "turbo") frequencies are enabled. That
causes cpuinfo.max_freq to become the maximum "boost" frequency of
the given CPU (instead of the maximum frequency returned by the ACPI
_PSS object that corresponds to the "nominal" performance level).
Fixes: 41ea667227 ("x86, sched: Calculate frequency invariance for AMD systems")
Fixes: 976df7e573 ("x86, sched: Use midpoint of max_boost and max_P for frequency invariance on AMD EPYC")
Fixes: db865272d9 ("cpufreq: Avoid configuring old governors as default with intel_pstate")
Link: https://www.phoronix.com/scan.php?page=article&item=linux511-amd-schedutil&num=1
Link: https://lore.kernel.org/linux-pm/20210203135321.12253-2-ggherdovich@suse.cz/
Reported-by: Michael Larabel <Michael@phoronix.com>
Diagnosed-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Reviewed-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Tested-by: Michael Larabel <Michael@phoronix.com>
This flag is set by one of the drivers but it isn't used in the code
otherwise. Remove the unused flag and update the driver.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
During cpufreq driver's registration, if the ->init() callback for all
the CPUs fail then there is not much point in keeping the driver around
as it will only account for more of unnecessary noise, for example
cpufreq core will try to suspend/resume the driver which never got
registered properly.
The removal of such a driver is avoided if the driver carries the
CPUFREQ_STICKY flag. This was added way back [1] in 2004 and perhaps no
one should ever need it now. A lot of drivers do set this flag, probably
because they just copied it from other drivers.
This was added earlier for some platforms [2] because their cpufreq
drivers were getting registered before the CPUs were registered with
subsys framework. And hence they used to fail.
The same isn't true anymore though. The current code flow in the kernel
is:
start_kernel()
-> kernel_init()
-> kernel_init_freeable()
-> do_basic_setup()
-> driver_init()
-> cpu_dev_init()
-> subsys_system_register() //For CPUs
-> do_initcalls()
-> cpufreq_register_driver()
Clearly, the CPUs will always get registered with subsys framework
before any cpufreq driver can get probed. Remove the flag and update the
relevant drivers.
Link: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/include/linux/cpufreq.h?id=7cc9f0d9a1ab04cedc60d64fd8dcf7df224a3b4d # [1]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/arch/arm/mach-sa1100/cpu-sa1100.c?id=f59d3bbe35f6268d729f51be82af8325d62f20f5 # [2]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
dev_pm_opp_set_bw() is getting removed and dev_pm_opp_set_opp() should
be used instead. Migrate to the new API.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
In the comment for trace in passive mode there is an
unnecessary "the". Eradicate it.
Signed-off-by: Nigel Christian <nigel.l.christian@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The tango platform is getting removed, so the driver is no
longer needed.
Cc: Marc Gonzalez <marc.w.gonzalez@free.fr>
Cc: Mans Rullgard <mans@mansr.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[ Viresh: Update cpufreq-dt-platdev.c as well ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
If 'cpufreq_unregister_driver()' fails, just WARN and continue, so that
other resources are freed.
Fixes: de322e0859 ("cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ Viresh: Updated Subject ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
If 'cpufreq_register_driver()' fails, we must release the resources
allocated in 'brcm_avs_prepare_init()' as already done in the remove
function.
To do that, introduce a new function 'brcm_avs_prepare_uninit()' in order
to avoid code duplication. This also makes the code more readable (IMHO).
Fixes: de322e0859 ("cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ Viresh: Updated Subject ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
At least on sdm850, the 2956800 khz is detected as a boost frequency in
function qcom_cpufreq_hw_read_lut(). Let's enable boost support by
calling cpufreq_enable_boost_support(), so that we can get the boost
frequency by switching it on via 'boost' sysfs entry like below.
$ echo 1 > /sys/devices/system/cpu/cpufreq/boost
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Switch cpufreq-tegra20 driver to use resource-managed API.
This removes the need to get opp_table pointer using
dev_pm_opp_get_opp_table() in order to release OPP table that
was requested by dev_pm_opp_set_supported_hw(), making the code
a bit more straightforward.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Currently, when turbo is disabled (either by BIOS or by the user),
the intel_pstate driver reads the max non-turbo frequency from the
package-wide MSR_PLATFORM_INFO(0xce) register.
However, on asymmetric platforms it is possible in theory that small
and big core with HWP enabled might have different max non-turbo CPU
frequency, because MSR_HWP_CAPABILITIES is per-CPU scope according
to Intel Software Developer Manual.
The turbo max freq is already per-CPU in current code, so make
similar change to the max non-turbo frequency as well.
Reported-by: Wendy Wang <wendy.wang@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
[ rjw: Subject and changelog edits ]
Cc: 4.18+ <stable@vger.kernel.org> # 4.18+: a45ee4d4e13b: cpufreq: intel_pstate: Change intel_pstate_get_hwp_max() argument
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rename intel_cpufreq_adjust_hwp() and intel_cpufreq_adjust_perf_ctl()
to intel_cpufreq_hwp_update() and intel_cpufreq_perf_ctl_update(),
respectively, to avoid possible confusion with the ->adjist_perf()
callback function, intel_cpufreq_adjust_perf().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
All of the callers of intel_pstate_get_hwp_max() access the struct
cpudata object that corresponds to the given CPU already and the
function itself needs to access that object (in order to update
hwp_cap_cached), so modify the code to pass a struct cpudata pointer
to it instead of the CPU number.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Because intel_pstate_get_hwp_max() which updates hwp_cap_cached
may run in parallel with the readers of it, annotate all of the
read accesses to it with READ_ONCE().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
percent_fp() was used in intel_pstate_pid_reset(), which was removed in
commit 9d0ef7af1f ("cpufreq: intel_pstate: Do not use PID-based P-state
selection") and hence, percent_fp() is unused since then.
percent_ext_fp() was last used in intel_pstate_update_perf_limits(), which
was refactored in commit 1a4fe38add ("cpufreq: intel_pstate: Remove
max/min fractions to limit performance"), and hence, percent_ext_fp() is
unused since then.
make CC=clang W=1 points us those unused functions:
drivers/cpufreq/intel_pstate.c:79:23: warning: unused function 'percent_fp' [-Wunused-function]
static inline int32_t percent_fp(int percent)
^
drivers/cpufreq/intel_pstate.c:94:23: warning: unused function 'percent_ext_fp' [-Wunused-function]
static inline int32_t percent_ext_fp(int percent)
^
Remove those obsolete functions.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently there is an unlikely case where cpufreq_cpu_get() returns a
NULL policy and this will cause a NULL pointer dereference later on.
Fix this by passing the policy to transition_frequency_fidvid() from
the caller and hence eliminating the need for the cpufreq_cpu_get()
and cpufreq_cpu_put().
Thanks to Viresh Kumar for suggesting the fix.
Addresses-Coverity: ("Dereference null return")
Fixes: b43a7ffbf3 ("cpufreq: Notify all policy->cpus in cpufreq_notify_transition()")
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If turbo P-states cannot be used, either due to the configuration of
the processor, or because intel_pstate is not allowed to used them,
the maximum available P-state with HWP enabled corresponds to the
HWP_CAP.GUARANTEED value which is not static. It can be adjusted by
an out-of-band agent or during an Intel Speed Select performance
level change, so long as it remains less than or equal to
HWP_CAP.MAX.
However, if turbo P-states cannot be used, intel_cpufreq_adjust_perf()
always uses pstate.max_pstate (set during the initialization of the
driver only) as the maximum available P-state, so it may miss a change
of the HWP_CAP.GUARANTEED value.
Prevent that from happening by modifyig intel_cpufreq_adjust_perf()
to always read the "guaranteed" and "maximum turbo" performance
levels from the cached HWP_CAP value.
Fixes: a365ab6b9d ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
When sugov_update_single_perf() falls back to the "frequency"
path due to the missing scale-invariance, it will call
cpufreq_driver_fast_switch() via sugov_fast_switch()
and the driver's ->fast_switch() callback will be invoked,
so it must not be NULL.
However, after commit a365ab6b9d ("cpufreq: intel_pstate: Implement
the ->adjust_perf() callback") intel_pstate sets ->fast_switch() to
NULL when it is going to use intel_cpufreq_adjust_perf(), which is a
mistake, because on x86 the scale-invariance may be turned off
dynamically, so modify it to retain the original ->adjust_perf()
callback pointer.
Fixes: a365ab6b9d ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback")
Reported-by: Kenneth R. Crudup <kenny@panix.com>
Tested-by: Kenneth R. Crudup <kenny@panix.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* pm-cpufreq:
cpufreq: intel_pstate: Use most recent guaranteed performance values
cpufreq: intel_pstate: Implement the ->adjust_perf() callback
cpufreq: Add special-purpose fast-switching callback for drivers
cpufreq: schedutil: Add util to struct sg_cpu
cppc_cpufreq: replace per-cpu data array with a list
cppc_cpufreq: expose information on frequency domains
cppc_cpufreq: clarify support for coordination types
cppc_cpufreq: use policy->cpu as driver of frequency setting
ACPI: processor: fix NONE coordination for domain mapping failure
ACPI: processor: Drop duplicate setting of shared_cpu_map
When turbo has been disabled by the BIOS, but HWP_CAP.GUARANTEED is
changed later, user space may want to take advantage of this increased
guaranteed performance.
HWP_CAP.GUARANTEED is not a static value. It can be adjusted by an
out-of-band agent or during an Intel Speed Select performance level
change. The HWP_CAP.MAX is still the maximum achievable performance
with turbo disabled by the BIOS, so HWP_CAP.GUARANTEED can still
change as long as it remains less than or equal to HWP_CAP.MAX.
When HWP_CAP.GUARANTEED is changed, the sysfs base_frequency
attribute shows the most recent guaranteed frequency value. This
attribute can be used by user space software to update the scaling
min/max limits of the CPU.
Currently, the ->setpolicy() callback already uses the latest
HWP_CAP values when setting HWP_REQ, but the ->verify() callback will
restrict the user settings to the to old guaranteed performance value
which prevents user space from making use of the extra CPU capacity
theoretically available to it after increasing HWP_CAP.GUARANTEED.
To address this, read HWP_CAP in intel_pstate_verify_cpu_policy()
to obtain the maximum P-state that can be used and use that to
confine the policy max limit instead of using the cached and
possibly stale pstate.max_freq value for this purpose.
For consistency, update intel_pstate_update_perf_limits() to use the
maximum available P-state returned by intel_pstate_get_hwp_max() to
compute the maximum frequency instead of using the return value of
intel_pstate_get_max_freq() which, again, may be stale.
This issue is a side-effect of fixing the scaling frequency limits in
commit eacc9c5a92 ("cpufreq: intel_pstate: Fix intel_pstate_get_hwp_max()
for turbo disabled") which corrected the setting of the reduced scaling
frequency values, but caused stale HWP_CAP.GUARANTEED to be used in
the case at hand.
Fixes: eacc9c5a92 ("cpufreq: intel_pstate: Fix intel_pstate_get_hwp_max() for turbo disabled")
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 5.8+ <stable@vger.kernel.org> # 5.8+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make intel_pstate expose the ->adjust_perf() callback when it
operates in the passive mode with HWP enabled which causes the
schedutil governor to use that callback instead of ->fast_switch().
The minimum and target performance-level values passed by the
governor to ->adjust_perf() are converted to HWP.REQ.MIN and
HWP.REQ.DESIRED, respectively, which allows the processor to
adjust its configuration to maximize energy-efficiency while
providing sufficient capacity.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
First off, some cpufreq drivers (eg. intel_pstate) can pass hints
beyond the current target frequency to the hardware and there are no
provisions for doing that in the cpufreq framework. In particular,
today the driver has to assume that it should not allow the frequency
to fall below the one requested by the governor (or the required
capacity may not be provided) which may not be the case and which may
lead to excessive energy usage in some scenarios.
Second, the hints passed by these drivers to the hardware need not be
in terms of the frequency, so representing the utilization numbers
coming from the scheduler as frequency before passing them to those
drivers is not really useful.
Address the two points above by adding a special-purpose replacement
for the ->fast_switch callback, called ->adjust_perf, allowing the
governor to pass abstract performance level (rather than frequency)
values for the minimum (required) and target (desired) performance
along with the CPU capacity to compare them to.
Also update the schedutil governor to use the new callback instead
of ->fast_switch if present and if the utilization mertics are
frequency-invariant (that is requisite for the direct mapping
between the utilization and the CPU performance levels to be a
reasonable approximation).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
The cppc_cpudata per-cpu storage was inefficient (1) additional to causing
functional issues (2) when CPUs are hotplugged out, due to per-cpu data
being improperly initialised.
(1) The amount of information needed for CPPC performance control in its
cpufreq driver depends on the domain (PSD) coordination type:
ANY: One set of CPPC control and capability data (e.g desired
performance, highest/lowest performance, etc) applies to all
CPUs in the domain.
ALL: Same as ANY. To be noted that this type is not currently
supported. When supported, information about which CPUs
belong to a domain is needed in order for frequency change
requests to be sent to each of them.
HW: It's necessary to store CPPC control and capability
information for all the CPUs. HW will then coordinate the
performance state based on their limitations and requests.
NONE: Same as HW. No HW coordination is expected.
Despite this, the previous initialisation code would indiscriminately
allocate memory for all CPUs (all_cpu_data) and unnecessarily
duplicate performance capabilities and the domain sharing mask and type
for each possible CPU.
(2) With the current per-cpu structure, when having ANY coordination,
the cppc_cpudata cpu information is not initialised (will remain 0)
for all CPUs in a policy, other than policy->cpu. When policy->cpu is
hotplugged out, the driver will incorrectly use the uninitialised (0)
value of the other CPUs when making frequency changes. Additionally,
the previous values stored in the perf_ctrls.desired_perf will be
lost when policy->cpu changes.
Therefore replace the array of per cpu data with a list. The memory for
each structure is allocated at policy init, where a single structure
can be allocated per policy, not per cpu. In order to accommodate the
struct list_head node in the cppc_cpudata structure, the now unused cpu
and cur_policy variables are removed.
For example, on a arm64 Juno platform with 6 CPUs: (0, 1, 2, 3) in PSD1,
(4, 5) in PSD2 - ANY coordination, the memory allocation comparison shows:
Before patch:
- ANY coordination:
total slack req alloc/free caller
0 0 0 0/1 _kernel_size_le_hi32+0x0xffff800008ff7810
0 0 0 0/6 _kernel_size_le_hi32+0x0xffff800008ff7808
128 80 48 1/0 _kernel_size_le_hi32+0x0xffff800008ffc070
768 0 768 6/0 _kernel_size_le_hi32+0x0xffff800008ffc0e4
After patch:
- ANY coordination:
total slack req alloc/free caller
256 0 256 2/0 _kernel_size_le_hi32+0x0xffff800008fed410
0 0 0 0/2 _kernel_size_le_hi32+0x0xffff800008fed274
Additional notes:
- A pointer to the policy's cppc_cpudata is stored in policy->driver_data
- Driver registration is skipped if _CPC entries are not present.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use the existing sysfs attribute "freqdomain_cpus" to expose
information to userspace about CPUs in the same frequency domain.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The previous coordination type handling in the cppc_cpufreq init code
created some confusion: the comment mentioned "Support only SW_ANY for
now" while only the SW_ALL/ALL case resulted in a failure. The other
coordination types (HW_ALL/HW, NONE) were silently supported.
Clarify support for coordination types while describing in comments the
intended behavior.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Considering only the currently supported coordination types (ANY, HW,
NONE), this change only makes a difference for the ANY type, when
policy->cpu is hotplugged out. In that case the new policy->cpu will
be different from ((struct cppc_cpudata *)policy->driver_data)->cpu.
While in this case the controls of *ANY* CPU could be used to drive
frequency changes, it's more consistent to use policy->cpu as the
leading CPU, as used in all other cppc_cpufreq functions. Additionally,
the debug prints in cppc_set_perf() would no longer create confusion
when referring to a CPU that is hotplugged out.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull OPP (Operating Performance Points) updates for 5.11-rc1 from
Viresh Kumar:
"This contains the following updates:
- Allow empty (node-less) OPP tables in DT for passing just the
dependency related information (Nicola Mazzucato).
- Fix a potential lockdep in OPP core and other OPP core cleanups
(Viresh Kumar).
- Don't abuse dev_pm_opp_get_opp_table() to create an OPP table, fix
cpufreq-dt driver for the same (Viresh Kumar).
- dev_pm_opp_put_regulators() accepts a NULL argument now, updates to
all the users as well (Viresh Kumar)."
* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
opp: of: Allow empty opp-table with opp-shared
dt-bindings: opp: Allow empty OPP tables
media: venus: dev_pm_opp_put_*() accepts NULL argument
drm/panfrost: dev_pm_opp_put_*() accepts NULL argument
drm/lima: dev_pm_opp_put_*() accepts NULL argument
PM / devfreq: exynos: dev_pm_opp_put_*() accepts NULL argument
cpufreq: qcom-cpufreq-nvmem: dev_pm_opp_put_*() accepts NULL argument
cpufreq: dt: dev_pm_opp_put_regulators() accepts NULL argument
opp: Allow dev_pm_opp_put_*() APIs to accept NULL opp_table
opp: Don't create an OPP table from dev_pm_opp_get_opp_table()
cpufreq: dt: Don't (ab)use dev_pm_opp_get_opp_table() to create OPP table
opp: Reduce the size of critical section in _opp_kref_release()
opp: Don't return opp_dev from _find_opp_dev()
opp: Allocate the OPP table outside of opp_table_lock
opp: Always add entries in dev_list with opp_table->lock held
Make cpufreq_online() return negative error codes on all errors that
cause the policy to be destroyed, as appropriate.
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix up the remaining kerneldoc comments that don't adhere to the
expected format and clarify some of them a bit.
No functional changes.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
local_clock() has better precision and accuracy as compared to jiffies,
lets use it for time management in cpufreq stats.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Avoid doing the same assignment in both branches of a conditional,
do it after the whole conditional instead.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The dev_pm_opp_put_*() APIs now accepts a NULL opp_table pointer and so
there is no need for us to carry the extra checks. Drop them.
Reviewed-by: Ilia Lin <ilia.lin@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The dev_pm_opp_put_*() APIs now accepts a NULL opp_table pointer and so
there is no need for us to carry the extra checks. Drop them.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Initially, the helper dev_pm_opp_get_opp_table() was supposed to be used
only for the OPP core's internal use (it tries to find an existing OPP
table and if it doesn't find one, then it allocates the OPP table).
Sometime back, the cpufreq-dt driver started using it to make sure all
the relevant resources required by the OPP core are available earlier
during initialization process to properly propagate -EPROBE_DEFER.
It worked but it also abused the API to create an OPP table, which
should be created with the help of other helpers provided by the OPP
core.
The OPP core will be updated in a later commit to limit the scope of
dev_pm_opp_get_opp_table() to only finding an existing OPP table and not
create one. This commit updates the cpufreq-dt driver before that
happens.
Now the cpufreq-dt driver creates the OPP and cpufreq tables for all the
CPUs from driver's init callback itself.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add mechanism to discover the power scale present in the performance
protocol for all domains. Provide this information to Energy Model,
which then can be checked in other frameworks, e.g. thermal.
Suggested-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The function tegra194_get_speed_common() uses hardware timers to
calculate the current CPUFREQ and so rename this function to be
tegra194_calculate_speed() to reflect what it does.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The Tegra194 CPUFREQ driver sets the CPUFREQ_NEED_INITIAL_FREQ_CHECK
flag which means that the CPUFREQ framework will call the 'get' callback
on boot to determine the current frequency of the CPUs. Therefore, it is
not necessary for the Tegra194 CPUFREQ driver to internally call the
tegra194_get_speed_common() during initialisation to query the current
frequency as well. Fix this by removing the call to the
tegra194_get_speed_common() during initialisation and simplify the code.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The CPUFREQ driver framework references each individual CPUs when
getting and setting the speed. Tegra186 has 3 clusters of A57 CPUs and
1 cluster of Denver CPUs. Hence, the Tegra186 CPUFREQ driver need to
know which cluster a given CPU belongs to. The logic in the Tegra186
driver can be greatly simplified by storing the cluster ID associated
with each CPU in the tegra186_cpufreq_cpu structure. This allow us to
completely remove the Tegra cluster info structure from the driver and
simplifiy the code.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Sparse warns that the incorrect type is being assigned to the CPUFREQ
driver_data variable in the Tegra186 CPUFREQ driver. The Tegra186
CPUFREQ driver is assigned a type of 'void __iomem *' to a pointer of
type 'void *' ...
drivers/cpufreq/tegra186-cpufreq.c:72:37: sparse: sparse: incorrect
type in assignment (different address spaces) @@
expected void *driver_data @@ got void [noderef] __iomem * @@
...
drivers/cpufreq/tegra186-cpufreq.c:87:40: sparse: sparse: incorrect
type in initializer (different address spaces) @@
expected void [noderef] __iomem *edvd_reg @@ got void *driver_data @@
The Tegra186 CPUFREQ driver is using the policy->driver_data variable to
store and iomem pointer to a Tegra186 CPU register that is used to set
the clock speed for the CPU. This is not necessary because the register
base address is already stored in the driver data and the offset of the
register for each CPU is static. Therefore, fix this by adding a new
structure with the register offsets for each CPU and store this in the
main driver data structure along with the register base address. Please
note that a new structure has been added for storing the register
offsets rather than a simple array, because this will permit further
clean-ups and simplification of the driver.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
A driver should not 'select' drivers from another subsystem.
If NVMEM is disabled, this one results in a warning:
WARNING: unmet direct dependencies detected for NVMEM_IMX_OCOTP
Depends on [n]: NVMEM [=n] && (ARCH_MXC [=y] || COMPILE_TEST [=y]) && HAS_IOMEM [=y]
Selected by [y]:
- ARM_IMX6Q_CPUFREQ [=y] && CPU_FREQ [=y] && (ARM || ARM64 [=y]) && ARCH_MXC [=y] && REGULATOR_ANATOP [=y]
Change the 'select' to 'depends on' to prevent it from going wrong,
and allow compile-testing without that driver, since it is only
a runtime dependency.
Fixes: 2782ef34ed ("cpufreq: imx: Select NVMEM_IMX_OCOTP")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This patch adds missing MODULE_ALIAS for automatic loading of this cpufreq
driver when it is compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 47ac9aa165 ("cpufreq: arm_big_little: add vexpress SPC interface driver")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This patch adds missing MODULE_ALIAS for automatic loading of this cpufreq
driver when it is compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 8def31034d ("cpufreq: arm_big_little: add SCPI interface driver")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This patch adds missing MODULE_ALIAS for automatic loading of this cpufreq
driver when it is compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: a0a22cf144 ("cpufreq: Loongson1: Add cpufreq driver for Loongson1B")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: f328584f7b ("cpufreq: Add sun50i nvmem based CPU scaling driver")
Reviewed-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: ab0ea257fc ("cpufreq: st: Provide runtime initialised driver for ST's platforms")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 46e2856b8e ("cpufreq: Add Kryo CPU scaling driver")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 501c574f4e ("cpufreq: mediatek: Add support of cpufreq to MT2701/MT7623 SoC")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 6754f55610 ("cpufreq / highbank: add support for highbank cpufreq")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: f525a67053 ("cpufreq: ap806: add cpufreq driver for Armada 8K")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add the missing platform_driver_unregister() before return from
mtk_cpufreq_driver_init in the error handling case when failed
to register mtk-cpufreq platform device
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Frequency returned by 'cpuinfo_cur_freq' using counters is not fixed
and keeps changing slightly. This change returns a consistent value
from freq_table. If the reconstructed frequency has acceptable delta
from the last written value, then return the frequency corresponding
to the last written ndiv value from freq_table. Otherwise, print a
warning and return the reconstructed freq.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add MT8516 to cpufreq-dt-platdev blacklist since the actual scaling is
handled by the 'mediatek-cpufreq' driver.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Use dev_pm_opp_put_prop_name() to avoid mem leak, which free opp_table.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Yangtao Li <frank@allwinnertech.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Pull SCMI cpufreq driver fix for 5.10-rc6 from Viresh Kumar:
"This fixes a build issues with SCMI cpufreq driver in the
!CONFIG_COMMON_CLK case."
* 'cpufreq/arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: scmi: Fix build for !CONFIG_COMMON_CLK
Commit 8410e7f3b3 ("cpufreq: scmi: Fix OPP addition failure with a
dummy clock provider") registers a dummy clock provider using
devm_of_clk_add_hw_provider. These *_hw_provider functions are defined
only when CONFIG_COMMON_CLK=y. One possible fix is to add the Kconfig
dependency, but since we plan to move away from the clock dependency
for scmi cpufreq, it is preferrable to avoid that.
Let us just conditionally compile out the offending call to
devm_of_clk_add_hw_provider. It also uses the variable 'dev' outside
of the #ifdef block to avoid build warning.
Fixes: 8410e7f3b3 ("cpufreq: scmi: Fix OPP addition failure with a dummy clock provider")
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The CPPC performance capabilities are used significantly throughout
the driver.
Simplify the use of them by introducing a local pointer "caps" to
point to cpu_data->perf_caps, in functions that access performance
capabilities often.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In order to maintain the typical naming convention in the cpufreq
framework:
- replace the use of "cpu" variable name for cppc_cpudata pointers
with "cpu_data"
- replace variable names "cpu_num" and "cpunum" with "cpu"
- make cpu variables unsigned int
Where pertinent, also move the initialisation of cpu_data variable to
its declaration and make consistent use of the local "cpu" variable.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix a few trivial issues in the cppc_cpufreq driver:
- indentation of function arguments
- consistent use of tabs (vs space) in defines
- spelling: s/Offest/Offset, s/trasition/transition
- order of local variables, from long pointers to structures to
short ret and i (index) variables, to improve readability
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull cpufreq-arm fixes for 5.10-rc5 from Viresh Kumar:
"- tegra186: Fix ->get() callback.
- arm/scmi: Add dummy clock provider to fix failure."
* 'cpufreq/arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: scmi: Fix OPP addition failure with a dummy clock provider
cpufreq: tegra186: Fix get frequency callback
Commit dd461cd918 ("opp: Allow dev_pm_opp_get_opp_table() to return
-EPROBE_DEFER") handles -EPROBE_DEFER for the clock/interconnects within
_allocate_opp_table() which is called from dev_pm_opp_add and it
now propagates the error back to the caller.
SCMI performance domain re-used clock bindings to keep it simple. However
with the above mentioned change, if clock property is present in a device
node, opps fails to get added with below errors until clk_get succeeds.
cpu0: failed to add opp 450000000Hz
cpu0: failed to add opps to the device
....(errors on cpu1-cpu4)
cpu5: failed to add opp 450000000Hz
cpu5: failed to add opps to the device
So, in order to fix the issue, we need to register dummy clock provider.
With the dummy clock provider, clk_get returns NULL(no errors!), then opp
core proceeds to add OPPs for the CPUs.
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Fixes: dd461cd918 ("opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Commit b89c01c960 ("cpufreq: tegra186: Fix initial frequency")
implemented the CPUFREQ 'get' callback to determine the current
operating frequency for each CPU. This implementation used a simple
looked up to determine the current operating frequency. The problem
with this is that frequency table for different Tegra186 devices may
vary and so the default boot frequency for Tegra186 device may or may
not be present in the frequency table. If the default boot frequency is
not present in the frequency table, this causes the function
tegra186_cpufreq_get() to return 0 and in turn causes cpufreq_online()
to fail which prevents CPUFREQ from working.
Fix this by always calculating the CPU frequency based upon the current
'ndiv' setting for the CPU. Note that the CPU frequency for Tegra186 is
calculated by reading the current 'ndiv' setting, multiplying by the
CPU reference clock and dividing by a constant divisor.
Fixes: b89c01c960 ("cpufreq: tegra186: Fix initial frequency")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
There are different platforms and devices which might use different scale
for the power values. Kernel sub-systems might need to check if all
Energy Model (EM) devices are using the same scale. Address that issue and
store the information inside EM for each device. Thanks to that they can
be easily compared and proper action triggered.
Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Quentin Perret <qperret@google.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make intel_pstate take the new CPUFREQ_GOV_STRICT_TARGET governor
flag into account when it operates in the passive mode with HWP
enabled, so as to fix the "powersave" governor behavior in that
case (currently, HWP is allowed to scale the performance all the
way up to the policy max limit when the "powersave" governor is
used, but it should be constrained to the policy min limit then).
Fixes: f6ebbcf08f ("cpufreq: intel_pstate: Implement passive mode with HWP enabled")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 5.9+ <stable@vger.kernel.org> # 5.9+: 9a2a9ebc0a cpufreq: Introduce governor flags
Cc: 5.9+ <stable@vger.kernel.org> # 5.9+: 218f668701 cpufreq: Introduce CPUFREQ_GOV_STRICT_TARGET
Cc: 5.9+ <stable@vger.kernel.org> # 5.9+: ea9364bbad cpufreq: Add strict_target to struct cpufreq_policy
Add a new field to be set when the CPUFREQ_GOV_STRICT_TARGET flag is
set for the current governor to struct cpufreq_policy, so that the
drivers needing to check CPUFREQ_GOV_STRICT_TARGET do not have to
access the governor object during every frequency transition.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Introduce a new governor flag, CPUFREQ_GOV_STRICT_TARGET, for the
governors that want the target frequency to be set exactly to the
given value without leaving any room for adjustments on the hardware
side and set this flag for the powersave and performance governors.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
A new cpufreq governor flag will be added subsequently, so replace
the bool dynamic_switching fleid in struct cpufreq_governor with a
flags field and introduce CPUFREQ_GOV_DYNAMIC_SWITCHING to set for
the "dynamic switching" governors instead of it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
The restore_freq field in struct cpufreq_policy is only used by
__target_index() in one place and a local variable in that function
may as well be used instead of it, so drop it and modify
__target_index() accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Add a helper function to test the flags of the cpufreq driver in use
againt a given flags mask.
In particular, this will be needed to test the
CPUFREQ_NEED_UPDATE_LIMITS cpufreq driver flag in the schedutil
governor.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A semicolon is not needed after a switch statement.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If the cpufreq policy max limit is changed when intel_pstate operates
in the passive mode with HWP enabled and the "powersave" governor is
used on top of it, the HWP max limit is not updated as appropriate.
Namely, in the "powersave" governor case, the target P-state
is always equal to the policy min limit, so if the latter does
not change, intel_cpufreq_adjust_hwp() is not invoked to update
the HWP Request MSR due to the "target_pstate != old_pstate" check
in intel_cpufreq_update_pstate(), so the HWP max limit is not
updated as a result.
Also, if the CPUFREQ_NEED_UPDATE_LIMITS flag is not set for the
driver and the target frequency does not change along with the
policy max limit, the "target_freq == policy->cur" check in
__cpufreq_driver_target() prevents the driver's ->target() callback
from being invoked at all, so the HWP max limit is not updated.
To prevent that occurring, set the CPUFREQ_NEED_UPDATE_LIMITS flag
in the intel_cpufreq driver structure if HWP is enabled and modify
intel_cpufreq_update_pstate() to do the "target_pstate != old_pstate"
check only in the non-HWP case and let intel_cpufreq_adjust_hwp()
always run in the HWP case (it will update HWP Request only if the
cached value of the register is different from the new one including
the limits, so if neither the target P-state value nor the max limit
changes, the register write will still be avoided).
Fixes: f6ebbcf08f ("cpufreq: intel_pstate: Implement passive mode with HWP enabled")
Reported-by: Zhang Rui <rui.zhang@intel.com>
Cc: 5.9+ <stable@vger.kernel.org> # 5.9+: 1c534352f4 cpufreq: Introduce CPUFREQ_NEED_UPDATE_LIMITS ...
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Generally, a cpufreq driver may need to update some internal upper
and lower frequency boundaries on policy max and min changes,
respectively, but currently this does not work if the target
frequency does not change along with the policy limit.
Namely, if the target frequency does not change along with the
policy min or max, the "target_freq == policy->cur" check in
__cpufreq_driver_target() prevents driver callbacks from being
invoked and they do not even have a chance to update the
corresponding internal boundary.
This particularly affects the "powersave" and "performance"
governors that always set the target frequency to one of the
policy limits and it never changes when the other limit is updated.
To allow cpufreq the drivers needing to update internal frequency
boundaries on policy limits changes to avoid this issue, introduce
a new driver flag, CPUFREQ_NEED_UPDATE_LIMITS, that (when set) will
neutralize the check mentioned above.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Commit 33aa46f252 ("cpufreq: intel_pstate: Use passive mode by
default without HWP") was meant to cause intel_pstate to be used
in the passive mode with the schedutil governor on top of it, but
it missed the case in which either "ondemand" or "conservative"
was selected as the default governor in the existing kernel config,
in which case the previous old governor configuration would be used,
causing the default legacy governor to be used on top of intel_pstate
instead of schedutil.
Address this by preventing "ondemand" and "conservative" from being
configured as the default cpufreq governor in the case when schedutil
is the default choice for the default governor setting.
[Note that the default cpufreq governor can still be set via the
kernel command line if need be and that choice is not limited,
so if anyone really wants to use one of the legacy governors by
default, it can be achieved this way.]
Fixes: 33aa46f252 ("cpufreq: intel_pstate: Use passive mode by default without HWP")
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Cc: 5.8+ <stable@vger.kernel.org> # 5.8+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
A 'break' following a 'return' statement is pointless, so remove it.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Various driver updates for platforms. A bulk of this is smaller fixes or
cleanups, but some of the new material this time around is:
- Support for Nvidia Tegra234 SoC
- Ring accelerator support for TI AM65x
- PRUSS driver for TI platforms
- Renesas support for R-Car V3U SoC
- Reset support for Cortex-M4 processor on i.MX8MQ
There are also new socinfo entries for a handful of different SoCs
and platforms.
-----BEGIN PGP SIGNATURE-----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=tfPb
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC-related driver updates from Olof Johansson:
"Various driver updates for platforms. A bulk of this is smaller fixes
or cleanups, but some of the new material this time around is:
- Support for Nvidia Tegra234 SoC
- Ring accelerator support for TI AM65x
- PRUSS driver for TI platforms
- Renesas support for R-Car V3U SoC
- Reset support for Cortex-M4 processor on i.MX8MQ
There are also new socinfo entries for a handful of different SoCs and
platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (131 commits)
drm/mediatek: reduce clear event
soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api
soc: mediatek: cmdq: add jump function
soc: mediatek: cmdq: add write_s_mask value function
soc: mediatek: cmdq: add write_s value function
soc: mediatek: cmdq: add read_s function
soc: mediatek: cmdq: add write_s_mask function
soc: mediatek: cmdq: add write_s function
soc: mediatek: cmdq: add address shift in jump
soc: mediatek: mtk-infracfg: Fix kerneldoc
soc: amlogic: pm-domains: use always-on flag
reset: sti: reset-syscfg: fix struct description warnings
reset: imx7: add the cm4 reset for i.MX8MQ
dt-bindings: reset: imx8mq: add m4 reset
reset: Fix and extend kerneldoc
reset: reset-zynqmp: Added support for Versal platform
dt-bindings: reset: Updated binding for Versal reset driver
reset: imx7: Support module build
soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk
soc: fsl: qman: convert to use be32_add_cpu()
...
SoC changes, a substantial part of this is cleanup of some of the older
platforms that used to have a bunch of board files. In particular:
- Removal of non-DT i.MX platforms that haven't seen activity in years,
it's time to remove them.
- A bunch of cleanup and removal of platform data for TI/OMAP platforms,
moving over to genpd for power/reset control (yay!)
- Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
closer to multiplatform support (not quite there yet, but getting
close).
THere are a few other changes too, smaller fixlets, etc. For new
platform support, the primary ones re:
- New SoC: Hisilicon SD5203, ARM926EJ-S platform.
- Cpufreq support for i.MX7ULP
-----BEGIN PGP SIGNATURE-----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=0+Ee
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform updates from Olof Johansson:
"SoC changes, a substantial part of this is cleanup of some of the
older platforms that used to have a bunch of board files.
In particular:
- Remove non-DT i.MX platforms that haven't seen activity in years,
it's time to remove them.
- A bunch of cleanup and removal of platform data for TI/OMAP
platforms, moving over to genpd for power/reset control (yay!)
- Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
closer to multiplatform support (not quite there yet, but getting
close).
There are a few other changes too, smaller fixlets, etc. For new
platform support, the primary ones are:
- New SoC: Hisilicon SD5203, ARM926EJ-S platform.
- Cpufreq support for i.MX7ULP"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits)
ARM: mstar: Select MStar intc
ARM: stm32: Replace HTTP links with HTTPS ones
ARM: debug: add UART early console support for SD5203
ARM: hisi: add support for SD5203 SoC
ARM: omap3: enable off mode automatically
clk: imx: imx35: Remove mx35_clocks_init()
clk: imx: imx31: Remove mx31_clocks_init()
clk: imx: imx27: Remove mx27_clocks_init()
ARM: imx: Remove unused definitions
ARM: imx35: Retrieve the IIM base address from devicetree
ARM: imx3: Retrieve the AVIC base address from devicetree
ARM: imx3: Retrieve the CCM base address from devicetree
ARM: imx31: Retrieve the IIM base address from devicetree
ARM: imx27: Retrieve the CCM base address from devicetree
ARM: imx27: Retrieve the SYSCTRL base address from devicetree
ARM: s3c64xx: bring back notes from removed debug-macro.S
ARM: s3c24xx: fix Wunused-variable warning on !MMU
ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
MAINTAINERS: mark linux-samsung-soc list non-moderated
ARM: imx: Remove remnant board file support pieces
...
- Move the AVS drivers to new platform-specific locations and get
rid of the drivers/power/avs directory (Ulf Hansson).
- Add on/off notifiers and idle state accounting support to the
generic power domains (genpd) framework (Ulf Hansson, Lina Iyer).
- Ulf will maintain the PM domain part of cpuidle-psci (Ulf Hansson).
- Make intel_idle disregard ACPI _CST if it cannot use the data
returned by that method (Mel Gorman).
- Modify intel_pstate to avoid leaving useless sysfs directory
structure behind if it cannot be registered (Chen Yu).
- Fix domain detection in the RAPL power capping driver and prevent
it from failing to enumerate the Psys RAPL domain (Zhang Rui).
- Allow acpi-cpufreq to use ACPI _PSD information with Family 19 and
later AMD chips (Wei Huang).
- Update the driver assumptions comment in intel_idle and fix a
kerneldoc comment in the runtime PM framework (Alexander Monakov,
Bean Huo).
- Avoid unnecessary resets of the cached frequency in the schedutil
cpufreq governor to reduce overhead (Wei Wang).
- Clean up the cpufreq core a bit (Viresh Kumar).
- Make assorted minor janitorial changes (Daniel Lezcano, Geert
Uytterhoeven, Hubert Jasudowicz, Tom Rix).
- Clean up and optimize the cpupower utility somewhat (Colin Ian
King, Martin Kaistra).
-----BEGIN PGP SIGNATURE-----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=TFKg
-----END PGP SIGNATURE-----
Merge tag 'pm-5.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"First of all, the adaptive voltage scaling (AVS) drivers go to new
platform-specific locations as planned (this part was reported to have
merge conflicts against the new arm-soc updates in linux-next).
In addition to that, there are some fixes (intel_idle, intel_pstate,
RAPL, acpi_cpufreq), the addition of on/off notifiers and idle state
accounting support to the generic power domains (genpd) code and some
janitorial changes all over.
Specifics:
- Move the AVS drivers to new platform-specific locations and get rid
of the drivers/power/avs directory (Ulf Hansson).
- Add on/off notifiers and idle state accounting support to the
generic power domains (genpd) framework (Ulf Hansson, Lina Iyer).
- Ulf will maintain the PM domain part of cpuidle-psci (Ulf Hansson).
- Make intel_idle disregard ACPI _CST if it cannot use the data
returned by that method (Mel Gorman).
- Modify intel_pstate to avoid leaving useless sysfs directory
structure behind if it cannot be registered (Chen Yu).
- Fix domain detection in the RAPL power capping driver and prevent
it from failing to enumerate the Psys RAPL domain (Zhang Rui).
- Allow acpi-cpufreq to use ACPI _PSD information with Family 19 and
later AMD chips (Wei Huang).
- Update the driver assumptions comment in intel_idle and fix a
kerneldoc comment in the runtime PM framework (Alexander Monakov,
Bean Huo).
- Avoid unnecessary resets of the cached frequency in the schedutil
cpufreq governor to reduce overhead (Wei Wang).
- Clean up the cpufreq core a bit (Viresh Kumar).
- Make assorted minor janitorial changes (Daniel Lezcano, Geert
Uytterhoeven, Hubert Jasudowicz, Tom Rix).
- Clean up and optimize the cpupower utility somewhat (Colin Ian
King, Martin Kaistra)"
* tag 'pm-5.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
PM: sleep: remove unreachable break
PM: AVS: Drop the avs directory and the corresponding Kconfig
PM: AVS: qcom-cpr: Move the driver to the qcom specific drivers
PM: runtime: Fix typo in pm_runtime_set_active() helper comment
PM: domains: Fix build error for genpd notifiers
powercap: Fix typo in Kconfig "Plance" -> "Plane"
cpufreq: schedutil: restore cached freq when next_f is not changed
acpi-cpufreq: Honor _PSD table setting on new AMD CPUs
PM: AVS: smartreflex Move driver to soc specific drivers
PM: AVS: rockchip-io: Move the driver to the rockchip specific drivers
PM: domains: enable domain idle state accounting
PM: domains: Add curly braces to delimit comment + statement block
PM: domains: Add support for PM domain on/off notifiers for genpd
powercap/intel_rapl: enumerate Psys RAPL domain together with package RAPL domain
powercap/intel_rapl: Fix domain detection
intel_idle: Ignore _CST if control cannot be taken from the platform
cpuidle: Remove pointless stub
intel_idle: mention assumption that WBINVD is not needed
MAINTAINERS: Add section for cpuidle-psci PM domain
cpufreq: intel_pstate: Delete intel_pstate sysfs if failed to register the driver
...
acpi-cpufreq has a old quirk that overrides the _PSD table supplied by
BIOS on AMD CPUs. However the _PSD table of new AMD CPUs (Family 19h+)
now accurately reports the P-state dependency of CPU cores. Hence this
quirk needs to be fixed in order to support new CPUs' frequency control.
Fixes: acd3162482 ("acpi-cpufreq: Add quirk to disable _PSD usage on all AMD CPUs")
Signed-off-by: Wei Huang <wei.huang2@amd.com>
[ rjw: Subject edit ]
Cc: 3.10+ <stable@vger.kernel.org> # 3.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- A series from Nick adding ARCH_WANT_IRQS_OFF_ACTIVATE_MM & selecting it for
powerpc, as well as a related fix for sparc.
- Remove support for PowerPC 601.
- Some fixes for watchpoints & addition of a new ptrace flag for detecting ISA
v3.1 (Power10) watchpoint features.
- A fix for kernels using 4K pages and the hash MMU on bare metal Power9
systems with > 16TB of RAM, or RAM on the 2nd node.
- A basic idle driver for shallow stop states on Power10.
- Tweaks to our sched domains code to better inform the scheduler about the
hardware topology on Power9/10, where two SMT4 cores can be presented by
firmware as an SMT8 core.
- A series doing further reworks & cleanups of our EEH code.
- Addition of a filter for RTAS (firmware) calls done via sys_rtas(), to
prevent root from overwriting kernel memory.
- Other smaller features, fixes & cleanups.
Thanks to:
Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Athira Rajeev, Biwen
Li, Cameron Berkenpas, Cédric Le Goater, Christophe Leroy, Christoph Hellwig,
Colin Ian King, Daniel Axtens, David Dai, Finn Thain, Frederic Barrat, Gautham
R. Shenoy, Greg Kurz, Gustavo Romero, Ira Weiny, Jason Yan, Joel Stanley,
Jordan Niethe, Kajol Jain, Konrad Rzeszutek Wilk, Laurent Dufour, Leonardo
Bras, Liu Shixin, Luca Ceresoli, Madhavan Srinivasan, Mahesh Salgaonkar,
Nathan Lynch, Nicholas Mc Guire, Nicholas Piggin, Nick Desaulniers, Oliver
O'Halloran, Pedro Miraglia Franco de Carvalho, Pratik Rajesh Sampat, Qian Cai,
Qinglang Miao, Ravi Bangoria, Russell Currey, Satheesh Rajendran, Scott
Cheloha, Segher Boessenkool, Srikar Dronamraju, Stan Johnson, Stephen Kitt,
Stephen Rothwell, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain,
Vaidyanathan Srinivasan, Vasant Hegde, Wang Wensheng, Wolfram Sang, Yang
Yingliang, zhengbin.
-----BEGIN PGP SIGNATURE-----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=akeX
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- A series from Nick adding ARCH_WANT_IRQS_OFF_ACTIVATE_MM & selecting
it for powerpc, as well as a related fix for sparc.
- Remove support for PowerPC 601.
- Some fixes for watchpoints & addition of a new ptrace flag for
detecting ISA v3.1 (Power10) watchpoint features.
- A fix for kernels using 4K pages and the hash MMU on bare metal
Power9 systems with > 16TB of RAM, or RAM on the 2nd node.
- A basic idle driver for shallow stop states on Power10.
- Tweaks to our sched domains code to better inform the scheduler about
the hardware topology on Power9/10, where two SMT4 cores can be
presented by firmware as an SMT8 core.
- A series doing further reworks & cleanups of our EEH code.
- Addition of a filter for RTAS (firmware) calls done via sys_rtas(),
to prevent root from overwriting kernel memory.
- Other smaller features, fixes & cleanups.
Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V,
Athira Rajeev, Biwen Li, Cameron Berkenpas, Cédric Le Goater, Christophe
Leroy, Christoph Hellwig, Colin Ian King, Daniel Axtens, David Dai, Finn
Thain, Frederic Barrat, Gautham R. Shenoy, Greg Kurz, Gustavo Romero,
Ira Weiny, Jason Yan, Joel Stanley, Jordan Niethe, Kajol Jain, Konrad
Rzeszutek Wilk, Laurent Dufour, Leonardo Bras, Liu Shixin, Luca
Ceresoli, Madhavan Srinivasan, Mahesh Salgaonkar, Nathan Lynch, Nicholas
Mc Guire, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Pedro
Miraglia Franco de Carvalho, Pratik Rajesh Sampat, Qian Cai, Qinglang
Miao, Ravi Bangoria, Russell Currey, Satheesh Rajendran, Scott Cheloha,
Segher Boessenkool, Srikar Dronamraju, Stan Johnson, Stephen Kitt,
Stephen Rothwell, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain,
Vaidyanathan Srinivasan, Vasant Hegde, Wang Wensheng, Wolfram Sang, Yang
Yingliang, zhengbin.
* tag 'powerpc-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (228 commits)
Revert "powerpc/pci: unmap legacy INTx interrupts when a PHB is removed"
selftests/powerpc: Fix eeh-basic.sh exit codes
cpufreq: powernv: Fix frame-size-overflow in powernv_cpufreq_reboot_notifier
powerpc/time: Make get_tb() common to PPC32 and PPC64
powerpc/time: Make get_tbl() common to PPC32 and PPC64
powerpc/time: Remove get_tbu()
powerpc/time: Avoid using get_tbl() and get_tbu() internally
powerpc/time: Make mftb() common to PPC32 and PPC64
powerpc/time: Rename mftbl() to mftb()
powerpc/32s: Remove #ifdef CONFIG_PPC_BOOK3S_32 in head_book3s_32.S
powerpc/32s: Rename head_32.S to head_book3s_32.S
powerpc/32s: Setup the early hash table at all time.
powerpc/time: Remove ifdef in get_dec() and set_dec()
powerpc: Remove get_tb_or_rtc()
powerpc: Remove __USE_RTC()
powerpc: Tidy up a bit after removal of PowerPC 601.
powerpc: Remove support for PowerPC 601
powerpc: Remove PowerPC 601
powerpc: Drop SYNC_601() ISYNC_601() and SYNC()
powerpc: Remove CONFIG_PPC601_SYNC_FIX
...
There is a corner case that if the intel_pstate driver fails to be
registered (might be due to invalid MSR access) and acpi_cpufreq
takse over, the intel_pstate sysfs interface is still populated
which may confuse user space (turbostat for example):
grep . /sys/devices/system/cpu/cpu0/cpufreq/scaling_driver
acpi-cpufreq
grep . /sys/devices/system/cpu/intel_pstate/*
/sys/devices/system/cpu/intel_pstate/max_perf_pct:0
/sys/devices/system/cpu/intel_pstate/min_perf_pct:0
grep: /sys/devices/system/cpu/intel_pstate/no_turbo: Resource temporarily unavailable
grep: /sys/devices/system/cpu/intel_pstate/num_pstates: Resource temporarily unavailable
/sys/devices/system/cpu/intel_pstate/status:off
grep: /sys/devices/system/cpu/intel_pstate/turbo_pct: Resource temporarily unavailable
The mere presence of the intel_pstate sysfs interface does not mean
that intel_pstate is in use (for example, echo "off" to "status"),
but it should not be created in the failing case.
Fix this issue by deleting the intel_pstate sysfs if the driver
registration fails.
Reported-by: Wendy Wang <wendy.wang@intel.com>
Suggested-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com
[ rjw: Refactor code to avoid jumps, change function name, changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The cpufreq core checks if the frequency programmed by the bootloaders
is not listed in the freq table and programs one from the table in such
a case. This is done only if the driver has set the
CPUFREQ_NEED_INITIAL_FREQ_CHECK flag.
Currently we print two separate messages, with almost the same content,
and do this with a pr_warn() which may be a bit too much as the driver
only asked us to check this as it expected this to be the case. Lower
down the severity of the print message by switching to pr_info() instead
and print a single message only.
Reported-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Sumit Gupta <sumitg@nvidia.com>
Tested-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>