In libxfs xfs_bmbt_disk_get_all needs to handle unaligned data and thus
has been updated to use get_unaligned_be64. In kernelspace we don't strictly
need it as the routine is only used for tracing and xfsidbg, but let's keep
the two implementations in sync.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
structures.
Always use the generic xfs_btree_block type instead of the short / long
structures. Add XFS_BTREE_SBLOCK_LEN / XFS_BTREE_LBLOCK_LEN defines for
the length of a short / long form block. The rationale for this is that we
will grow more btree block header variants to support CRCs and other RAS
information, and always accessing them through the same datatype with
unions for the short / long form pointers makes implementing this much
easier.
SGI-PV: 988146
SGI-Modid: xfs-linux-melb:xfs-kern:32300a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Replace the generic record / key / ptr addressing macros that use cpp
token pasting with simpler macros that do the job for just one given btree
type. The new macros lose the cur argument and thus can be used outside
the core btree code, but also gain an xfs_mount * argument to allow for
checking the CRC flag in the near future. Note that many of these macros
aren't actually used in the kernel code, but only in userspace (mostly in
xfs_repair).
SGI-PV: 988146
SGI-Modid: xfs-linux-melb:xfs-kern:32295a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Clean up the way the maximum and minimum records for the btree blocks are
calculated. For the alloc and inobt btrees all the values are
pre-calculated in xfs_mount_common, and we switch the current loop around
the ugly generic macros that use cpp token pasting to generate type names
to two small helpers in normal C code. For the bmbt and bmdr trees these
helpers also exist, but can be called during runtime, too. Here we also
kill various macros dealing with them and inline the logic into the
get_minrecs / get_maxrecs / get_dmaxrecs methods in xfs_bmap_btree.c.
Note that all these new helpers take an xfs_mount * argument which will be
needed to determine the size of a btree block once we add support for
extended btree blocks with CRCs and other RAS information.
SGI-PV: 988146
SGI-Modid: xfs-linux-melb:xfs-kern:32292a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Add methods to check whether two keys/records are in the righ order. This
replaces the xfs_btree_check_key and xfs_btree_check_rec methods. For the
callers from xfs_bmap.c just opencode the bmbt-specific asserts.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32208a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
These are equivalent to the xfs_btree_* versions, and the only remaining
caller can be switched to the generic one after they are exported. Also
remove some now dead infrastructure in xfs_bmap_btree.c.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32207a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Make the btree delete code generic. Based on a patch from David Chinner
with lots of changes to follow the original btree implementations more
closely. While this loses some of the generic helper routines for
inserting/moving/removing records it also solves some of the one off bugs
in the original code and makes it easier to verify.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32205a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
xfs_bmbt_killroot is a mostly generic implementation of moving from a real
block based root to an inode based root. So move it to xfs_btree.c where
it can use all the nice infrastructure there and make it pointer size
agnostic
The new name for it is xfs_btree_kill_iroot, following the old naming but
making it clear we're dealing with the root in inode case here, and to
avoid confusion with xfs_btree_new_root which is used for the not inode
rooted case. I've also added a comment describing what it does and why
it's named the way it is.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32203a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Make the btree insert code generic. Based on a patch from David Chinner
with lots of changes to follow the original btree implementations more
closely. While this loses some of the generic helper routines for
inserting/moving/removing records it also solves some of the one off bugs
in the original code and makes it easier to verify.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32202a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
xfs_bmbt_newroot is a mostly generic implementation of moving from an
inode root to a real block based root. So move it to xfs_btree.c where it
can use all the nice infrastructure there and make it pointer size
agnostic
The new name for it is xfs_btree_new_iroot, following the old naming but
making it clear we're dealing with the root in inode case here, and to
avoid confusion with xfs_btree_new_root which is used for the not inode
rooted case.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32201a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Make the btree split code generic. Based on a patch from David Chinner
with lots of changes to follow the original btree implementations more
closely. While this loses some of the generic helper routines for
inserting/moving/removing records it also solves some of the one off bugs
in the original code and makes it easier to verify.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32198a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Make the btree left shift code generic. Based on a patch from David
Chinner with lots of changes to follow the original btree implementations
more closely. While this loses some of the generic helper routines for
inserting/moving/removing records it also solves some of the one off bugs
in the original code and makes it easier to verify.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32197a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Make the btree right shift code generic. Based on a patch from David
Chinner with lots of changes to follow the original btree implementations
more closely. While this loses some of the generic helper routines for
inserting/moving/removing records it also solves some of the one off bugs
in the original code and makes it easier to verify.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32196a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
From: Dave Chinner <dgc@sgi.com>
The most complicated part here is the lastrec tracking for the alloc
btree. Most logic is in the update_lastrec method which has to do some
hopefully good enough dirty magic to maintain it.
[hch: split out from bigger patch and a rework of the lastrec
logic]
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32194a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
From: Dave Chinner <dgc@sgi.com>
Note that there are many > 80 char lines introduced due to the
xfs_btree_key casts. But the places where this happens is throw-away code
once the whole btree code gets merged into a common implementation.
The same is true for the temporary xfs_alloc_log_keys define to the new
name. All old users will be gone after a few patches.
[hch: split out from bigger patch and minor adaptions]
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32193a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
From: Dave Chinner <dgc@sgi.com>
[hch: split out from bigger patch and minor adaptions]
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32192a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
From: Dave Chinner <dgc@sgi.com>
[hch: split out from bigger patch and minor adaptions]
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32191a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
From: Dave Chinner <dgc@sgi.com>
Because this is the first major generic btree routine this patch includes
some infrastrucure, first a few routines to deal with a btree block that
can be either in short or long form, second xfs_btree_read_buf_block,
which is the new central routine to read a btree block given a cursor, and
third the new xfs_btree_ptr_addr routine to calculate the address for a
given btree pointer record.
[hch: split out from bigger patch and minor adaptions]
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32190a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Add new helpers in xfs_btree.c to find the record, key and block pointer
entries inside a btree block. To implement this genericly the
->get_maxrecs methods and two new xfs_btree_ops entries for the key and
record sizes are used. Also add a big comment describing how the
addressing inside a btree block works.
Note that these helpers are unused until users are introduced in the next
patches and this patch will thus cause some harmless compiler warnings.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32189a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Factor xfs_btree_maxrecs into a per-btree operation.
The get_maxrecs method is based on a patch from Dave Chinner.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32188a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Make the existing bmap btree tracing generic so that it applies to all
btree types.
Some fragments lifted from a patch by Dave Chinner.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32187a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
From: Dave Chinner <dgc@sgi.com>
Refactor xfs_btree_readahead to make it more readable:
(a) remove the inline xfs_btree_readahead wrapper and move all checks out
of line into the main routine.
(b) factor out helpers for short/long form btrees
(c) move check for root in inodes from the callers into
xfs_btree_readahead
[hch: split out from a big patch and minor cleanups]
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32182a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Add a flag to the xfs btree cursor when using long (64bit) block pointers
instead of checking btnum == XFS_BTNUM_BMAP.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32181a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
The bmap btree is rooted in the inode and not in a disk block. Make the
support for this feature more generic by adding a btree flag to for this
feature instead of relying on the XFS_BTNUM_BMAP btnum check.
Also clean up xfs_btree_get_block where this new flag is used.
Based upon a patch from Dave Chinner.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32180a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
xfs_btree_init_cursor contains close to little shared code for the
different btrees and will get even more non-common code in the future.
Split it up into one routine per btree type.
Because xfs_btree_dup_cursor needs to call the init routine for a generic
btree cursor add a new btree operation vector that contains a dup_cursor
method that initializes a new cursor based on an existing one.
The btree operations vector is based on an idea and code from Dave Chinner
and will grow more entries later during this series.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32176a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
algorithm
If xfs_bmbt_split() cannot find an AG with sufficient free space to
satisfy a full extent btree split then fall back to the lowspace allocator
algorithm.
SGI-PV: 983338
SGI-Modid: xfs-linux-melb:xfs-kern:31359a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
When free space is running low the extent allocator may choose to allocate
an extent from an AG without leaving sufficient space for a btree split
when inserting the new extent (see where xfs_bmap_btalloc() sets minleft
to 0). In this case the allocator will enable the lowspace algorithm which
is supposed to allow further allocations (such as btree splits and
newroots) to allocate from sequential AGs. This algorithm has been broken
for a long time and this patch restores its behaviour.
SGI-PV: 983338
SGI-Modid: xfs-linux-melb:xfs-kern:31358a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
The bmap btree split code relies on a previous data extent allocation
(from xfs_bmap_btalloc()) to find an AG that has sufficient space to
perform a full btree split, when inserting the extent. When converting
unwritten extents we don't allocate a data extent so a btree split will be
the first allocation. In this case we need to set minleft so the allocator
will pick an AG that has space to complete the split(s).
SGI-PV: 983338
SGI-Modid: xfs-linux-melb:xfs-kern:31357a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
After a btree insert operation a cursor can be invalid due to block splits
and a maybe a new root block. We reset the cursor in xfs_bmbt_insert() in
the cases where we think we need to but it isn't enough as we still see
assertions. Just do what we do elsewhere and reset the cursor
unconditionally. Also remove the fix to revalidate the original cursor in
xfs_bmbt_insert().
SGI-PV: 983336
SGI-Modid: xfs-linux-melb:xfs-kern:31342a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: David Chinner <dgc@sgi.com>
When writing into preallocated regions there is a case where XFS can oops
or hang doing the unwritten extent conversion on I/O completion. It turns
out that the problem is related to the btree cursor being invalid.
When we do an insert into the tree, we may need to split blocks in the
tree. When we only split at the leaf level (i.e. level 0), everything
works just fine. However, if we have a multi-level split in the btreee,
the cursor passed to the insert function is no longer valid once the
insert is complete.
The leaf level split is handled correctly because all the operations at
level 0 are done using the original cursor, hence it is updated correctly.
However, when we need to update the next level up the tree, we don't use
that cursor - we use a cloned cursor that points to the index in the next
level up where we need to do the insert.
Hence if we need to split a second level, the changes to the tree are
reflected in the cloned cursor and not the original cursor. This
clone-and-move-up-a-level-on-split behaviour recurses all the way to the
top of the tree.
The complexity here is that these cloned cursors do not point to the
original index that was inserted - they point to the newly allocated block
(the right block) and the original cursor pointer to that level may still
point to the left block. Hence, without deep examination of the cloned
cursor and buffers, we cannot update the original cursor with the new path
from the cloned cursor.
In these cases the original cursor could be pointing to the wrong block(s)
and hence a subsequent modification to the tree using that cursor will
lead to corruption of the tree.
The crash case occurs when the tree changes height - we insert a new level
in the tree, and the cursor does not have a buffer in it's path for that
level. Hence any attempt to walk back up the cursor to the root block will
result in a null pointer dereference.
To make matters even more complex, the BMAP BT is rooted in an inode, so
we can have a change of height in the btree *without a root split*. That
is, if the root block in the inode is full when we split a leaf node, we
cannot fit the pointer to the new block in the root, so we allocate a new
block, migrate all the ptrs out of the inode into the new block and point
the inode root block at the newly allocated block. This changes the height
of the tree without a root split having occurred and hence invalidates the
path in the original cursor.
The patch below prevents xfs_bmbt_insert() from returning with an invalid
cursor by detecting the cases that invalidate the original cursor and
refresh it by do a lookup into the btree for the original index we were
inserting at.
Note that the INOBT, AGFBNO and AGFCNT btree implementations also have
this bug, but the cursor is currently always destroyed or revalidated
after an insert for those trees. Hence this patch only address the problem
in the BMBT code.
SGI-PV: 979339
SGI-Modid: xfs-linux-melb:xfs-kern:30701a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
remove beX_add functions and replace all uses with beX_add_cpu
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Reviewed-by: Dave Chinner <dgc@sgi.com>
Cc: Timothy Shimmin <tes@sgi.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use XFS_IS_REALTIME_INODE in more places, and #define it to 0 if
CONFIG_XFS_RT is off. This should be safe because mount checks in
xfs_rtmount_init:
so if we get mounted w/o CONFIG_XFS_RT, no realtime inodes should be
encountered after that.
Defining XFS_IS_REALTIME_INODE to 0 saves a bit of stack space,
presumeably gcc can optimize around the various "if (0)" type checks:
xfs_alloc_file_space -8 xfs_bmap_adjacent -16 xfs_bmapi -8
xfs_bmap_rtalloc -16 xfs_bunmapi -28 xfs_free_file_space -64 xfs_imap +8
<-- ? hmm. xfs_iomap_write_direct -12 xfs_qm_dqusage_adjust -4
xfs_qm_vop_chown_reserve -4
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30014a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
In sgi mod# xfs-linux-melb:xfs-kern:29319a, the variable renaming was not
complete and variable 'b' was left unchanged for non-lbd 32 bit machines.
SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29469a
Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
xfs_bmbt_set_all/xfs_bmbt_disk_set_all are identical to
xfs_bmbt_set_allf/xfs_bmbt_disk_set_allf except that the former take a
xfs_bmbt_irec_t and the latter take the individual extent fields as scalar
values.
This patch reimplements xfs_bmbt_set_all/xfs_bmbt_disk_set_all as trivial
wrappers around xfs_bmbt_set_allf/xfs_bmbt_disk_set_allf and cleans up the
variable naming in xfs_bmbt_set_allf/xfs_bmbt_disk_set_allf to have some
meaning instead of one char variable names.
SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29319a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
currently xfs_bmbt_rec_t is used both for ondisk extents as well as
host-endian ones. This patch adds a new xfs_bmbt_rec_host_t for the native
endian ones and cleans up the fallout. There have been various endianess
issues in the tracing / debug printf code that are fixed by this patch.
SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29318a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Remove the hardcoded "fnames" for tracing, and just embed them in tracing
macros via __FUNCTION__. Kills a lot of #ifdefs too.
SGI-PV: 967353
SGI-Modid: xfs-linux-melb:xfs-kern:29099a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Patch provided by Eric Sandeen (sandeen@sandeen.net).
SGI-PV: 960897
SGI-Modid: xfs-linux-melb:xfs-kern:28038a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
It makes it incrementally clearer to read the code when the top of a macro
spaghetti-pile only receives the 3 arguments it uses, rather than 2 extra
ones which are not used. Also when you start pulling this thread out of
the sweater (i.e. remove unused args from XFS_BTREE_*_ADDR), a couple
other third arms etc fall off too. If they're not used in the macro, then
they sometimes don't need to be passed to the function calling the macro
either, etc....
Patch provided by Eric Sandeen (sandeen@sandeen.net).
SGI-PV: 960197
SGI-Modid: xfs-linux-melb:xfs-kern:28037a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
gcc-4.1 and more recent aggressively inline static functions which
increases XFS stack usage by ~15% in critical paths. Prevent this from
occurring by adding noinline to the STATIC definition.
Also uninline some functions that are too large to be inlined and were
causing problems with CONFIG_FORCED_INLINING=y.
Finally, clean up all the different users of inline, __inline and
__inline__ and put them under one STATIC_INLINE macro. For debug kernels
the STATIC_INLINE macro uninlines those functions.
SGI-PV: 957159
SGI-Modid: xfs-linux-melb:xfs-kern:27585a
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: David Chatterton <chatz@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
__be64 and let the callers use the proper macros.
SGI-PV: 954580
SGI-Modid: xfs-linux-melb:xfs-kern:26560a
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nathan Scott <nathans@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
transaction within each such operation may involve multiple locking of AGF
buffer. While the freeing extent function has sorted the extents based on
AGF number before entering into transaction, however, when the file system
space is very limited, the allocation of space would try every AGF to get
space allocated, this could potentially cause out-of-order locking, thus
deadlock could happen. This fix mitigates the scarce space for allocation
by setting aside a few blocks without reservation, and avoid deadlock by
maintaining ascending order of AGF locking.
SGI-PV: 947395
SGI-Modid: xfs-linux-melb:xfs-kern:210801a
Signed-off-by: Yingping Lu <yingping@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
code to prepare for an upcoming mod which will introduce multi-level
in-core extent allocations. Although the in-core extent management is
using a new code path in this mod, the functionality remains the same.
Major changes include: - Introduce 10 new subroutines which re-orgainze
the existing code but do NOT change functionality:
xfs_iext_get_ext() xfs_iext_insert() xfs_iext_add()
xfs_iext_remove() xfs_iext_remove_inline()
xfs_iext_remove_direct() xfs_iext_realloc_direct()
xfs_iext_direct_to_inline() xfs_iext_inline_to_direct()
xfs_iext_destroy() - Remove 2 subroutines (functionality moved to new
subroutines above): xfs_iext_realloc() -replaced by xfs_iext_add()
and xfs_iext_remove() xfs_bmap_insert_exlist() - replaced by
xfs_iext_insert() xfs_bmap_delete_exlist() - replaced by
xfs_iext_remove() - Replace all hard-coded (indexed) extent assignments
with a call to xfs_iext_get_ext() - Replace all extent record pointer
arithmetic (ep++, ep--, base + lastx,..) with calls to
xfs_iext_get_ext() - Update comments to remove the idea of a single
"extent list" and introduce "extent record" terminology instead
SGI-PV: 928864
SGI-Modid: xfs-linux-melb:xfs-kern:207390a
Signed-off-by: Mandy Kirkconnell <alkirkco@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
Eric Sandeen