tl;dr: Clean up an unnecessary export and enable cxl_test.
An RCD (Restricted CXL Device), in contrast to a typical CXL device in
a VH topology, obtains its component registers from the bottom half of
the associated CXL host bridge RCRB (Root Complex Register Block). In
turn this means that cxl_rcrb_to_component() needs to be called from
devm_cxl_add_endpoint().
Presently devm_cxl_add_endpoint() is part of the CXL core, but the only
user is the CXL mem module. Move it from cxl_core to cxl_mem to not only
get rid of an unnecessary export, but to also enable its call out to
cxl_rcrb_to_component(), in a subsequent patch, to be mocked by
cxl_test. Recall that cxl_test can only mock exported symbols, and since
cxl_rcrb_to_component() is itself inside the core, all callers must be
outside of cxl_core to allow cxl_test to mock it.
Reviewed-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/166993045072.1882361.13944923741276843683.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
A downstream port must be connected to a component register block.
For restricted hosts the base address is determined from the RCRB. The
RCRB is provided by the host's CEDT CHBS entry. Rework CEDT parser to
get the RCRB and add code to extract the component register block from
it.
RCRB's BAR[0..1] point to the component block containing CXL subsystem
component registers. MEMBAR extraction follows the PCI base spec here,
esp. 64 bit extraction and memory range alignment (6.0, 7.5.1.2.1). The
RCRB base address is cached in the cxl_dport per-host bridge so that the
upstream port component registers can be retrieved later by an RCD
(RCIEP) associated with the host bridge.
Note: Right now the component register block is used for HDM decoder
capability only which is optional for RCDs. If unsupported by the RCD,
the HDM init will fail. It is future work to bypass it in this case.
Co-developed-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/Y4dsGZ24aJlxSfI1@rric.localdomain
[djbw: introduce devm_cxl_add_rch_dport()]
Link: https://lore.kernel.org/r/166993044524.1882361.2539922887413208807.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
A port of a CXL host bridge links to the bridge's ACPI device
(&adev->dev) with its corresponding uport/dport device (uport_dev and
dport_dev respectively). The device is not a direct parent device in
the PCI topology as pdev->dev.parent points to a PCI bridge's (struct
pci_host_bridge) device. The following CXL memory device hierarchy
would be valid for an endpoint once an RCD EP would be enabled (note
this will be done in a later patch):
VH mode:
cxlmd->dev.parent->parent
^^^\^^^^^^\ ^^^^^^\
\ \ pci_dev (Type 1, Downstream Port)
\ pci_dev (Type 0, PCI Express Endpoint)
cxl mem device
RCD mode:
cxlmd->dev.parent->parent
^^^\^^^^^^\ ^^^^^^\
\ \ pci_host_bridge
\ pci_dev (Type 0, RCiEP)
cxl mem device
In VH mode a downstream port is created by port enumeration and thus
always exists.
Now, in RCD mode the host bridge also already exists but it references
to an ACPI device. A port lookup by the PCI device's parent device
will fail as a direct link to the registered port is missing. The ACPI
device of the bridge must be determined first.
To prevent this, change port registration of a CXL host to use the
bridge device instead. Do this also for the VH case as port topology
will better reflect the PCI topology then.
Signed-off-by: Robert Richter <rrichter@amd.com>
[djbw: rebase on brige mocking]
Reviewed-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166993043978.1882361.16238060349889579369.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Accept any cxl_test topology device as the first argument in
cxl_chbs_context.
This is in preparation for reworking the detection of the component
registers across VH and RCH topologies. Move
mock_acpi_table_parse_cedt() beneath the definition of is_mock_port()
and use is_mock_port() instead of the explicit mock cxl_acpi device
check.
Acked-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166993043433.1882361.17651413716599606118.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Now that cxl_nvdimm and cxl_pmem_region objects are torn down
sychronously with the removal of either the bridge, or an endpoint, the
cxl_pmem_wq infrastructure can be jettisoned.
Tested-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/166993042335.1882361.17022872468068436287.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The three objects 'struct cxl_nvdimm_bridge', 'struct cxl_nvdimm', and
'struct cxl_pmem_region' manage CXL persistent memory resources. The
bridge represents base platform resources, the nvdimm represents one or
more endpoints, and the region is a collection of nvdimms that
contribute to an assembled address range.
Their relationship is such that a region is torn down if any component
endpoints are removed. All regions and endpoints are torn down if the
foundational bridge device goes down.
A workqueue was deployed to manage these interdependencies, but it is
difficult to reason about, and fragile. A recent attempt to take the CXL
root device lock in the cxl_mem driver was reported by lockdep as
colliding with the flush_work() in the cxl_pmem flows.
Instead of the workqueue, arrange for all pmem/nvdimm devices to be torn
down immediately and hierarchically. A similar change is made to both
the 'cxl_nvdimm' and 'cxl_pmem_region' objects. For bisect-ability both
changes are made in the same patch which unfortunately makes the patch
bigger than desired.
Arrange for cxl_memdev and cxl_region to register a cxl_nvdimm and
cxl_pmem_region as a devres release action of the bridge device.
Additionally, include a devres release action of the cxl_memdev or
cxl_region device that triggers the bridge's release action if an endpoint
exits before the bridge. I.e. this allows either unplugging the bridge,
or unplugging and endpoint to result in the same cleanup actions.
To keep the patch smaller the cleanup of the now defunct workqueue
infrastructure is saved for a follow-on patch.
Tested-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/166993041773.1882361.16444301376147207609.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Now that a cxl_nvdimm object can only experience ->remove() via an
unregistration event (because the cxl_nvdimm bind attributes are
suppressed), additional cleanups are possible.
It is already the case that the removal of a cxl_memdev object triggers
->remove() on any associated region. With that mechanism in place there
is no need for the cxl_nvdimm removal to trigger the same. Just rely on
cxl_region_detach() to tear down the whole cxl_pmem_region.
Tested-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/166993041215.1882361.6321535567798911286.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The 'struct cxl_nvdimm_bridge' object advertises platform CXL PMEM
resources. It coordinates with libnvdimm to attach nvdimm devices and
regions for each corresponding CXL object. That coordination is
complicated, i.e. difficult to reason about, and it turns out redundant.
It is already the case that the CXL core knows how to tear down a
cxl_region when a cxl_memdev goes through ->remove(), so that pathway
can be extended to directly cleanup cxl_nvdimm and cxl_pmem_region
objects.
Towards the goal of ripping out the cxl_nvdimm_bridge state machine,
arrange for cxl_acpi to optionally pre-load the cxl_pmem driver so that
the nvdimm bridge is active synchronously with
devm_cxl_add_nvdimm_bridge(), and remove all the bind attributes for the
cxl_nvdimm* objects since the cxl root device and cxl_memdev bind
attributes are sufficient.
Tested-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/166993040668.1882361.7450361097265836752.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When reviewing the CFMWS parsing code that deals with the HDM decoders,
I noticed a couple of magic numbers. This commit replaces these magic numbers
with constants defined by the CXL 3.0 specification.
v2:
- Change references to CXL 3.0 specification (David)
- CXL_DECODER_MAX_GRANULARITY_ORDER -> CXL_DECODER_MAX_ENCODED_IG (Dan)
Signed-off-by: Adam Manzanares <a.manzanares@samsung.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20220829220249.243888-1-a.manzanares@samsung.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In cxl_acpi_probe() the iterator bus_for_each_dev() walks through all
CXL hosts. Since all dev_*() debug messages point to the ACPI0017
device which is the CXL root for all hosts, the device information is
pointless as it is always the same device. Change this to use the host
device for this instead.
Also, add additional host specific information such as CXL support,
UID and CHBCR.
This is an example log:
acpi ACPI0016:00: UID found: 4
acpi ACPI0016:00: CHBCR found: 0x28090000000
acpi ACPI0016:00: dport added to root0
acpi ACPI0016:00: host-bridge: ACPI0016:00
pci0000:7f: host supports CXL
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/20221018132341.76259-6-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In preparation for cxl_acpi walking pci_root->bus->bridge, add that
association to the mock pci_root instances.
Note that the missing 3rd entry in mock_pci_root[] was not noticed until
now given that the test version of to_cxl_host_bridge()
(tools/testing/cxl/mock_acpi.c), obviated the need for that entry.
However, "cxl/acpi: Improve debug messages in cxl_acpi_probe()" [1]
needs pci_root->bus->bridge to be populated.
Link: https://lore.kernel.org/r/20221018132341.76259-6-rrichter@amd.com [1]
Cc: Robert Richter <rrichter@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
CXL dports are added in a couple of code paths using
devm_cxl_add_dport(). Debug messages are individually generated, but are
incomplete and inconsistent. Change this by moving its generation to
devm_cxl_add_dport(). This unifies the messages and reduces code
duplication. Also, generate messages on failure. Use a
__devm_cxl_add_dport() wrapper to keep the readability of the error
exits.
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/20221018132341.76259-5-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
CXL ports are added in a couple of code paths using devm_cxl_add_port().
Debug messages are individually generated, but are incomplete and
inconsistent. Change this by moving its generation to
devm_cxl_add_port(). This unifies the messages and reduces code
duplication. Also, generate messages on failure. Use a
__devm_cxl_add_port() wrapper to keep the readability of the error
exits.
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/20221018132341.76259-4-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The physical base address of a CXL range can be invalid and is then
set to CXL_RESOURCE_NONE. In general software shall prevent such
situations, but it is hard to proof this may never happen. E.g. in
add_port_attach_ep() there this the following:
component_reg_phys = find_component_registers(uport_dev);
port = devm_cxl_add_port(&parent_port->dev, uport_dev,
component_reg_phys, parent_dport);
find_component_registers() and subsequent functions (e.g.
cxl_regmap_to_base()) may return CXL_RESOURCE_NONE. But it is written
to port without any further check in cxl_port_alloc():
port->component_reg_phys = component_reg_phys;
It is then later directly used in devm_cxl_setup_hdm() to map io
ranges with devm_cxl_iomap_block(). Just an example...
Check this condition. Also do not fail silently like an ioremap()
failure, use a WARN_ON_ONCE() for it.
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/20221018132341.76259-3-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The function devm_cxl_iomap_block() is only used in the core
code. There are two declarations in header files of it, in
drivers/cxl/core/core.h and drivers/cxl/cxl.h. Remove its unused
declaration in drivers/cxl/cxl.h.
Fixing build error in regs.c found by kernel test robot by including
"core.h" there.
Signed-off-by: Robert Richter <rrichter@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20221018132341.76259-2-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
With CXL security features, and CXL dynamic provisioning, global CPU
cache flushing nvdimm requirements are no longer specific to that
subsystem, even beyond the scope of security_ops. CXL will need such
semantics for features not necessarily limited to persistent memory.
The functionality this is enabling is to be able to instantaneously
secure erase potentially terabytes of memory at once and the kernel
needs to be sure that none of the data from before the erase is still
present in the cache. It is also used when unlocking a memory device
where speculative reads and firmware accesses could have cached poison
from before the device was unlocked. Lastly this facility is used when
mapping new devices, or new capacity into an established physical
address range. I.e. when the driver switches DeviceA mapping AddressX to
DeviceB mapping AddressX then any cached data from DeviceA:AddressX
needs to be invalidated.
This capability is typically only used once per-boot (for unlock), or
once per bare metal provisioning event (secure erase), like when handing
off the system to another tenant or decommissioning a device. It may
also be used for dynamic CXL region provisioning.
Users must first call cpu_cache_has_invalidate_memregion() to know
whether this functionality is available on the architecture. On x86 this
respects the constraints of when wbinvd() is tolerable. It is already
the case that wbinvd() is problematic to allow in VMs due its global
performance impact and KVM, for example, has been known to just trap and
ignore the call. With confidential computing guest execution of wbinvd()
may even trigger an exception. Given guests should not be messing with
the bare metal address map via CXL configuration changes
cpu_cache_has_invalidate_memregion() returns false in VMs.
While this global cache invalidation facility, is exported to modules,
since NVDIMM and CXL support can be built as a module, it is not for
general use. The intent is that this facility is not available outside
of specific "device-memory" use cases. To make that expectation as clear
as possible the API is scoped to a new "DEVMEM" module namespace that
only the NVDIMM and CXL subsystems are expected to import.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Tested-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The PCIE Data Object Exchange (DOE) mailbox is a protocol run over
configuration cycles. It assumes one initiator at a time. While the
kernel has control of the mailbox user space writes could interfere with
the kernel access.
Mark DOE mailbox config space exclusive when iterated by the CXL driver.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20220926215711.2893286-3-ira.weiny@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
PCI config space access from user space has traditionally been
unrestricted with writes being an understood risk for device operation.
Unfortunately, device breakage or odd behavior from config writes lacks
indicators that can leave driver writers confused when evaluating
failures. This is especially true with the new PCIe Data Object
Exchange (DOE) mailbox protocol where backdoor shenanigans from user
space through things such as vendor defined protocols may affect device
operation without complete breakage.
A prior proposal restricted read and writes completely.[1] Greg and
Bjorn pointed out that proposal is flawed for a couple of reasons.
First, lspci should always be allowed and should not interfere with any
device operation. Second, setpci is a valuable tool that is sometimes
necessary and it should not be completely restricted.[2] Finally
methods exist for full lock of device access if required.
Even though access should not be restricted it would be nice for driver
writers to be able to flag critical parts of the config space such that
interference from user space can be detected.
Introduce pci_request_config_region_exclusive() to mark exclusive config
regions. Such regions trigger a warning and kernel taint if accessed
via user space.
Create pci_warn_once() to restrict the user from spamming the log.
[1] https://lore.kernel.org/all/161663543465.1867664.5674061943008380442.stgit@dwillia2-desk3.amr.corp.intel.com/
[2] https://lore.kernel.org/all/YF8NGeGv9vYcMfTV@kroah.com/
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20220926215711.2893286-2-ira.weiny@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
- Fix region creation crash with pass-through decoders
- Fix region creation crash when no decoder allocation fails
- Fix region creation crash when scanning regions to enforce the
increasing physical address order constraint that CXL mandates
- Fix a memory leak for cxl_pmem_region objects, track 1:N instead of
1:1 memory-device-to-region associations.
- Fix a memory leak for cxl_region objects when regions with active
targets are deleted
- Fix assignment of NUMA nodes to CXL regions by CFMWS (CXL Window)
emulated proximity domains.
- Fix region creation failure for switch attached devices downstream of
a single-port host-bridge
- Fix false positive memory leak of cxl_region objects by recycling
recently used region ids rather than freeing them
- Add regression test infrastructure for a pass-through decoder
configuration
- Fix some mailbox payload handling corner cases
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCY2f0dwAKCRDfioYZHlFs
Z93zAQCHzy4qbEdw95SPQ/BpUJ2rxcWzruFZkaUTU1RHM5lApwEApP9Fjvdkgo9I
dlQTRON1nSqqoEXqSxbt8RU0I9Z11ws=
=pBN4
-----END PGP SIGNATURE-----
Merge tag 'cxl-fixes-for-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dan Williams:
"Several fixes for CXL region creation crashes, leaks and failures.
This is mainly fallout from the original implementation of dynamic CXL
region creation (instantiate new physical memory pools) that arrived
in v6.0-rc1.
Given the theme of "failures in the presence of pass-through decoders"
this also includes new regression test infrastructure for that case.
Summary:
- Fix region creation crash with pass-through decoders
- Fix region creation crash when no decoder allocation fails
- Fix region creation crash when scanning regions to enforce the
increasing physical address order constraint that CXL mandates
- Fix a memory leak for cxl_pmem_region objects, track 1:N instead of
1:1 memory-device-to-region associations.
- Fix a memory leak for cxl_region objects when regions with active
targets are deleted
- Fix assignment of NUMA nodes to CXL regions by CFMWS (CXL Window)
emulated proximity domains.
- Fix region creation failure for switch attached devices downstream
of a single-port host-bridge
- Fix false positive memory leak of cxl_region objects by recycling
recently used region ids rather than freeing them
- Add regression test infrastructure for a pass-through decoder
configuration
- Fix some mailbox payload handling corner cases"
* tag 'cxl-fixes-for-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/region: Recycle region ids
cxl/region: Fix 'distance' calculation with passthrough ports
tools/testing/cxl: Add a single-port host-bridge regression config
tools/testing/cxl: Fix some error exits
cxl/pmem: Fix cxl_pmem_region and cxl_memdev leak
cxl/region: Fix cxl_region leak, cleanup targets at region delete
cxl/region: Fix region HPA ordering validation
cxl/pmem: Use size_add() against integer overflow
cxl/region: Fix decoder allocation crash
ACPI: NUMA: Add CXL CFMWS 'nodes' to the possible nodes set
cxl/pmem: Fix failure to account for 8 byte header for writes to the device LSA.
cxl/region: Fix null pointer dereference due to pass through decoder commit
cxl/mbox: Add a check on input payload size
Fix two regressions:
- Commit 54cc3dbfc1 ("hwmon: (pmbus) Add regulator supply into macro")
resulted in regulator undercount when disabling regulators. Revert it.
- The thermal subsystem rework caused the scmi driver to no longer register
with the thermal subsystem because index values no longer match.
To fix the problem, the scmi driver now directly registers with the
thermal subsystem, no longer through the hwmon core.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEiHPvMQj9QTOCiqgVyx8mb86fmYEFAmNnv0YACgkQyx8mb86f
mYEAPQ/7BfM6TjP3L85oGHPUxhP+AEkEoCfD1gplgRD4JPxYZZlwv8F+YGTV/PPQ
mp12Bh8AH+NSryu6PhuhHKZxIvKcgxg+FEedfnT4gPYcMKtevPF84TBIbbFmLpuo
culgJm4w3w2qwqP480kF0UTow1pRXqwjZYd3/GILzcaCIjWS2JS55w//YMQrE5J+
+OkZsJSGWJITAJPYhIb0ETFcqjp8GROWfMZos2IdpErzmcuS31tcrD0igSwLXFwP
bylDDXb9O9AiLT/qzkc0kjZvaohC2zoP5we+7JyXj0sUSODf+wBCEClvM1DI00JN
CcS0zmgrmscktkTkonZDIz95vqO2Il5UmKXlK6dkpdDSS78JAX8g78LU1J7aFJ/9
3iZnmYg4J8NXsO01plr4P3cGdPRqDoZMEYojSWq4WQs2VaKNIxsk5Zzcl6XN6OT1
MT4w55d8QSQEghDu8vUvnmMg1X5Pkzc50RFYcWyeyMDrtue3rP4uD8m+wl9Sjgvs
tWdayF9JmTQBaVvh3dUO3OR+z+66T8Qk1YBE1xqb+ocptYPNA1+wGum/O5wT+3ew
lE8Jfn/8q7DAJ7lVNXKMyXMvPhZJZ5afhs+gpIJgPB2+m8p3plKgpGdW6Ew36AKe
PKwmGx8kgfzQ6RYqXmCMG6wCr+xiLrYDPNOVz5ewC5LvYVtibs4=
=u6Ip
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Fix two regressions:
- Commit 54cc3dbfc1 ("hwmon: (pmbus) Add regulator supply into
macro") resulted in regulator undercount when disabling regulators.
Revert it.
- The thermal subsystem rework caused the scmi driver to no longer
register with the thermal subsystem because index values no longer
match. To fix the problem, the scmi driver now directly registers
with the thermal subsystem, no longer through the hwmon core"
* tag 'hwmon-for-v6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
Revert "hwmon: (pmbus) Add regulator supply into macro"
hwmon: (scmi) Register explicitly with Thermal Framework
fixed microcode revisions checking quirk
- Update Icelake and Sapphire Rapids events constraints
- Use the standard energy unit for Sapphire Rapids in RAPL
- Fix the hw_breakpoint test to fail more graciously on !SMP configs
-----BEGIN PGP SIGNATURE-----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=midC
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.1_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Add Cooper Lake's stepping to the PEBS guest/host events isolation
fixed microcode revisions checking quirk
- Update Icelake and Sapphire Rapids events constraints
- Use the standard energy unit for Sapphire Rapids in RAPL
- Fix the hw_breakpoint test to fail more graciously on !SMP configs
* tag 'perf_urgent_for_v6.1_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Add Cooper Lake stepping to isolation_ucodes[]
perf/x86/intel: Fix pebs event constraints for SPR
perf/x86/intel: Fix pebs event constraints for ICL
perf/x86/rapl: Use standard Energy Unit for SPR Dram RAPL domain
perf/hw_breakpoint: test: Skip the test if dependencies unmet
- Enforce that TDX guests are successfully loaded only on TDX hardware
where virtualization exception (#VE) delivery on kernel memory is
disabled because handling those in all possible cases is "essentially
impossible"
- Add the proper include to the syscall wrappers so that BTF can see the
real pt_regs definition and not only the forward declaration
-----BEGIN PGP SIGNATURE-----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=nqZp
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.1_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Add new Intel CPU models
- Enforce that TDX guests are successfully loaded only on TDX hardware
where virtualization exception (#VE) delivery on kernel memory is
disabled because handling those in all possible cases is "essentially
impossible"
- Add the proper include to the syscall wrappers so that BTF can see
the real pt_regs definition and not only the forward declaration
* tag 'x86_urgent_for_v6.1_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add several Intel server CPU model numbers
x86/tdx: Panic on bad configs that #VE on "private" memory access
x86/tdx: Prepare for using "INFO" call for a second purpose
x86/syscall: Include asm/ptrace.h in syscall_wrapper header
- Use POSIX-compatible grep option.
- Document git-related tips for reproducible builds.
- Fix a typo in the modpost rule.
- Suppress SIGPIPE error message from gcc-ar and llvm-ar.
- Fix segmentation fault in the menuconfig search.
-----BEGIN PGP SIGNATURE-----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=1MFY
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Use POSIX-compatible grep options
- Document git-related tips for reproducible builds
- Fix a typo in the modpost rule
- Suppress SIGPIPE error message from gcc-ar and llvm-ar
- Fix segmentation fault in the menuconfig search
* tag 'kbuild-fixes-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: fix segmentation fault in menuconfig search
kbuild: fix SIGPIPE error message for AR=gcc-ar and AR=llvm-ar
kbuild: fix typo in modpost
Documentation: kbuild: Add description of git for reproducible builds
kbuild: use POSIX-compatible grep option
* Fix the pKVM stage-1 walker erronously using the stage-2 accessor
* Correctly convert vcpu->kvm to a hyp pointer when generating
an exception in a nVHE+MTE configuration
* Check that KVM_CAP_DIRTY_LOG_* are valid before enabling them
* Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE
* Document the boot requirements for FGT when entering the kernel
at EL1
x86:
* Use SRCU to protect zap in __kvm_set_or_clear_apicv_inhibit()
* Make argument order consistent for kvcalloc()
* Userspace API fixes for DEBUGCTL and LBRs
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmNncNEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOKJQf9HhmONhrKaLQ1Ycp5R5qbwbj4zKZR
3f78NxGaauG9MUHP96tSPWRSgLNQi36yUKI9FOFwfw/qsp79B+9KWkuqzWkYgXqj
CagwjTtCbQsLzQvDrvBt8Zrw7IQPtGFBFQjwQfyxRipEQBHndJpip0oYr8hoze5O
xICLmFsjMDtiHOjLwUhHJhaAh/qAg4xaoC6LsV855vkkqxd9Bhrj4z8QkcdUnjlt
mrP2u/4iAQGubH+3YnAqdWFQUMYxmd0WsIUw3RTzdZJWei6mLjDaA+B3jAIUiXnv
6UKrwlL56yQzUQxOt/v+d6J76FTDvjiqmUhgy7pINasJBoB5+xG4sJhOIA==
=Gqfw
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix the pKVM stage-1 walker erronously using the stage-2 accessor
- Correctly convert vcpu->kvm to a hyp pointer when generating an
exception in a nVHE+MTE configuration
- Check that KVM_CAP_DIRTY_LOG_* are valid before enabling them
- Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE
- Document the boot requirements for FGT when entering the kernel at
EL1
x86:
- Use SRCU to protect zap in __kvm_set_or_clear_apicv_inhibit()
- Make argument order consistent for kvcalloc()
- Userspace API fixes for DEBUGCTL and LBRs"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Fix a typo about the usage of kvcalloc()
KVM: x86: Use SRCU to protect zap in __kvm_set_or_clear_apicv_inhibit()
KVM: VMX: Ignore guest CPUID for host userspace writes to DEBUGCTL
KVM: VMX: Fold vmx_supported_debugctl() into vcpu_supported_debugctl()
KVM: VMX: Advertise PMU LBRs if and only if perf supports LBRs
arm64: booting: Document our requirements for fine grained traps with SME
KVM: arm64: Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE
KVM: Check KVM_CAP_DIRTY_LOG_{RING, RING_ACQ_REL} prior to enabling them
KVM: arm64: Fix bad dereference on MTE-enabled systems
KVM: arm64: Use correct accessor to parse stage-1 PTEs
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCY2dMgQAKCRCAXGG7T9hj
vtsjAQCajqsnrz+uzySSDRNJDUNPkh9x2vgVQFBwaQMJWSJBXgD+LbwYlCNPTg1R
E5IzcY5bxMK/bFEkTOpJQ3wacVA0wA4=
=64Hm
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"One fix for silencing a smatch warning, and a small cleanup patch"
* tag 'for-linus-6.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: simplify sysenter and syscall setup
x86/xen: silence smatch warning in pmu_msr_chk_emulated()
serious of which was one which would cause online resizes to fail with
file systems with metadata checksums enabled. Also fix a warning
caused by the newly added fortify string checker, plus some bugs that
were found using fuzzed file systems.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmNnSCYACgkQ8vlZVpUN
gaNbBgf/QsOe7KCrr/X7mK7SFgbNY+jsmvagPV0SvAg9Uc0P3EkmXE0NcNcZOAUx
mgNBYNNS+QGKtdqHBy8p1kNgcbFAR/OJZ7rFD3XUnB/N+XKZSgimhNUx+IaEX7Dx
XidK5cPcKEZlbfuqxwkIfvaqC9v3XcpFpHicA/uDTPe4kZ8VhJQk294M5EuMA8lQ
wumDFsf/1sN4osJH7eHMZk/e3iFN8fwrpCgvwJ56zzW7UWSl8jJrq9kxHo43iijY
82DbRCdsVrdTPaD5gJSvcggLgMpUu+yoA1UbwiUlR1AtmaFfDg+rfIZs1ooyCdHl
QLQ3RlXdkfHTwAYBFFApzR55MhPakQ==
=zw2b
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix a number of bugs, including some regressions, the most serious of
which was one which would cause online resizes to fail with file
systems with metadata checksums enabled.
Also fix a warning caused by the newly added fortify string checker,
plus some bugs that were found using fuzzed file systems"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix fortify warning in fs/ext4/fast_commit.c:1551
ext4: fix wrong return err in ext4_load_and_init_journal()
ext4: fix warning in 'ext4_da_release_space'
ext4: fix BUG_ON() when directory entry has invalid rec_len
ext4: update the backup superblock's at the end of the online resize
-----BEGIN PGP SIGNATURE-----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=ESTZ
-----END PGP SIGNATURE-----
Merge tag '6.1-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"One symlink handling fix and two fixes foir multichannel issues with
iterating channels, including for oplock breaks when leases are
disabled"
* tag '6.1-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix use-after-free on the link name
cifs: avoid unnecessary iteration of tcp sessions
cifs: always iterate smb sessions using primary channel
- Fixed NULL pointer dereference in the ring buffer wait-waiters code for
machines that have less CPUs than what nr_cpu_ids returns. The buffer
array is of size nr_cpu_ids, but only the online CPUs get initialized.
- Fixed use after free call in ftrace_shutdown.
- Fix accounting of if a kprobe is enabled
- Fix NULL pointer dereference on error path of fprobe rethook_alloc().
- Fix unregistering of fprobe_kprobe_handler
- Fix memory leak in kprobe test module
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCY2bPChQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qrOzAP95LEYzhi0pbxtuDHBv+HOTALi8Lttk
4FOcdrSj7tXn5wD/ZtNbOhq3OxTonPrIkZTBqpOohElIoXRSlt+Og68QCQE=
=4DN2
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull `lTracing fixes for 6.1-rc3:
- Fixed NULL pointer dereference in the ring buffer wait-waiters code
for machines that have less CPUs than what nr_cpu_ids returns.
The buffer array is of size nr_cpu_ids, but only the online CPUs get
initialized.
- Fixed use after free call in ftrace_shutdown.
- Fix accounting of if a kprobe is enabled
- Fix NULL pointer dereference on error path of fprobe rethook_alloc().
- Fix unregistering of fprobe_kprobe_handler
- Fix memory leak in kprobe test module
* tag 'trace-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: kprobe: Fix memory leak in test_gen_kprobe/kretprobe_cmd()
tracing/fprobe: Fix to check whether fprobe is registered correctly
fprobe: Check rethook_alloc() return in rethook initialization
kprobe: reverse kp->flags when arm_kprobe failed
ftrace: Fix use-after-free for dynamic ftrace_ops
ring-buffer: Check for NULL cpu_buffer in ring_buffer_wake_waiters()
* Fix the pKVM stage-1 walker erronously using the stage-2 accessor
* Correctly convert vcpu->kvm to a hyp pointer when generating
an exception in a nVHE+MTE configuration
* Check that KVM_CAP_DIRTY_LOG_* are valid before enabling them
* Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE
* Document the boot requirements for FGT when entering the kernel
at EL1
x86:
* Use SRCU to protect zap in __kvm_set_or_clear_apicv_inhibit()
* Make argument order consistent for kvcalloc()
* Userspace API fixes for DEBUGCTL and LBRs
With the new fortify string system, rework the memcpy to avoid this
warning:
memcpy: detected field-spanning write (size 60) of single field "&raw_inode->i_generation" at fs/ext4/fast_commit.c:1551 (size 4)
Cc: stable@kernel.org
Fixes: 54d9469bc5 ("fortify: Add run-time WARN for cross-field memcpy()")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The return value is wrong in ext4_load_and_init_journal(). The local
variable 'err' need to be initialized before goto out. The original code
in __ext4_fill_super() is fine because it has two return values 'ret'
and 'err' and 'ret' is initialized as -EINVAL. After we factor out
ext4_load_and_init_journal(), this code is broken. So fix it by directly
returning -EINVAL in the error handler path.
Cc: stable@kernel.org
Fixes: 9c1dd22d74 ("ext4: factor out ext4_load_and_init_journal()")
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221025040206.3134773-1-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The rec_len field in the directory entry has to be a multiple of 4. A
corrupted filesystem image can be used to hit a BUG() in
ext4_rec_len_to_disk(), called from make_indexed_dir().
------------[ cut here ]------------
kernel BUG at fs/ext4/ext4.h:2413!
...
RIP: 0010:make_indexed_dir+0x53f/0x5f0
...
Call Trace:
<TASK>
? add_dirent_to_buf+0x1b2/0x200
ext4_add_entry+0x36e/0x480
ext4_add_nondir+0x2b/0xc0
ext4_create+0x163/0x200
path_openat+0x635/0xe90
do_filp_open+0xb4/0x160
? __create_object.isra.0+0x1de/0x3b0
? _raw_spin_unlock+0x12/0x30
do_sys_openat2+0x91/0x150
__x64_sys_open+0x6c/0xa0
do_syscall_64+0x3c/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
The fix simply adds a call to ext4_check_dir_entry() to validate the
directory entry, returning -EFSCORRUPTED if the entry is invalid.
CC: stable@kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216540
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Link: https://lore.kernel.org/r/20221012131330.32456-1-lhenriques@suse.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-----BEGIN PGP SIGNATURE-----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=JQlF
-----END PGP SIGNATURE-----
Merge tag 'block-6.1-2022-11-05' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- Fixes for the ublk driver (Ming)
- Fixes for error handling memory leaks (Chen Jun, Chen Zhongjin)
- Explicitly clear the last request in a chain when the plug is
flushed, as it may have already been issued (Al)
* tag 'block-6.1-2022-11-05' of git://git.kernel.dk/linux:
block: blk_add_rq_to_plug(): clear stale 'last' after flush
blk-mq: Fix kmemleak in blk_mq_init_allocated_queue
block: Fix possible memory leak for rq_wb on add_disk failure
ublk_drv: add ublk_queue_cmd() for cleanup
ublk_drv: avoid to touch io_uring cmd in blk_mq io path
ublk_drv: comment on ublk_driver entry of Kconfig
ublk_drv: return flag of UBLK_F_URING_CMD_COMP_IN_TASK in case of module
xfstests generic/011 reported use-after-free bug as follows:
BUG: KASAN: use-after-free in __d_alloc+0x269/0x859
Read of size 15 at addr ffff8880078933a0 by task dirstress/952
CPU: 1 PID: 952 Comm: dirstress Not tainted 6.1.0-rc3+ #77
Call Trace:
__dump_stack+0x23/0x29
dump_stack_lvl+0x51/0x73
print_address_description+0x67/0x27f
print_report+0x3e/0x5c
kasan_report+0x7b/0xa8
kasan_check_range+0x1b2/0x1c1
memcpy+0x22/0x5d
__d_alloc+0x269/0x859
d_alloc+0x45/0x20c
d_alloc_parallel+0xb2/0x8b2
lookup_open+0x3b8/0x9f9
open_last_lookups+0x63d/0xc26
path_openat+0x11a/0x261
do_filp_open+0xcc/0x168
do_sys_openat2+0x13b/0x3f7
do_sys_open+0x10f/0x146
__se_sys_creat+0x27/0x2e
__x64_sys_creat+0x55/0x6a
do_syscall_64+0x40/0x96
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Allocated by task 952:
kasan_save_stack+0x1f/0x42
kasan_set_track+0x21/0x2a
kasan_save_alloc_info+0x17/0x1d
__kasan_kmalloc+0x7e/0x87
__kmalloc_node_track_caller+0x59/0x155
kstrndup+0x60/0xe6
parse_mf_symlink+0x215/0x30b
check_mf_symlink+0x260/0x36a
cifs_get_inode_info+0x14e1/0x1690
cifs_revalidate_dentry_attr+0x70d/0x964
cifs_revalidate_dentry+0x36/0x62
cifs_d_revalidate+0x162/0x446
lookup_open+0x36f/0x9f9
open_last_lookups+0x63d/0xc26
path_openat+0x11a/0x261
do_filp_open+0xcc/0x168
do_sys_openat2+0x13b/0x3f7
do_sys_open+0x10f/0x146
__se_sys_creat+0x27/0x2e
__x64_sys_creat+0x55/0x6a
do_syscall_64+0x40/0x96
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Freed by task 950:
kasan_save_stack+0x1f/0x42
kasan_set_track+0x21/0x2a
kasan_save_free_info+0x1c/0x34
____kasan_slab_free+0x1c1/0x1d5
__kasan_slab_free+0xe/0x13
__kmem_cache_free+0x29a/0x387
kfree+0xd3/0x10e
cifs_fattr_to_inode+0xb6a/0xc8c
cifs_get_inode_info+0x3cb/0x1690
cifs_revalidate_dentry_attr+0x70d/0x964
cifs_revalidate_dentry+0x36/0x62
cifs_d_revalidate+0x162/0x446
lookup_open+0x36f/0x9f9
open_last_lookups+0x63d/0xc26
path_openat+0x11a/0x261
do_filp_open+0xcc/0x168
do_sys_openat2+0x13b/0x3f7
do_sys_open+0x10f/0x146
__se_sys_creat+0x27/0x2e
__x64_sys_creat+0x55/0x6a
do_syscall_64+0x40/0x96
entry_SYSCALL_64_after_hwframe+0x63/0xcd
When opened a symlink, link name is from 'inode->i_link', but it may be
reset to a new value when revalidate the dentry. If some processes get the
link name on the race scenario, then UAF will happen on link name.
Fix this by implementing 'get_link' interface to duplicate the link name.
Fixes: 76894f3e2f ("cifs: improve symlink handling for smb2+")
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
In a few places, we do unnecessary iterations of
tcp sessions, even when the server struct is provided.
The change avoids it and uses the server struct provided.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
smb sessions and tcons currently hang off primary channel only.
Secondary channels have the lists as empty. Whenever there's a
need to iterate sessions or tcons, we should use the list in the
corresponding primary channel.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
- Avoid kprobe recursion when cortex_a76_erratum_1463225_debug_handler()
is not inlined (change to __always_inline).
- Fix the visibility of compat hwcaps, broken by recent changes to
consolidate the visibility of hwcaps and the user-space view of the ID
registers.
-----BEGIN PGP SIGNATURE-----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=5Vh8
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Avoid kprobe recursion when cortex_a76_erratum_1463225_debug_handler()
is not inlined (change to __always_inline).
- Fix the visibility of compat hwcaps, broken by recent changes to
consolidate the visibility of hwcaps and the user-space view of the
ID registers.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: cpufeature: Fix the visibility of compat hwcaps
arm64: entry: avoid kprobe recursion
This reverts commit 54cc3dbfc1.
Zev Weiss reports that the reverted patch may cause a regulator
undercount. Here is his report:
... having regulator-dummy set as a supply on my PMBus regulators
(instead of having them as their own top-level regulators without
an upstream supply) leads to enable-count underflow errors when
disabling them:
# echo 0 > /sys/bus/platform/devices/efuse01/state
[ 906.094477] regulator-dummy: Underflow of regulator enable count
[ 906.100563] Failed to disable vout: -EINVAL
[ 136.992676] reg-userspace-consumer efuse01: Failed to configure state: -22
Zev reports that reverting the patch fixes the problem. So let's do that
for now.
Fixes: 54cc3dbfc1 ("hwmon: (pmbus) Add regulator supply into macro")
Cc: Marcello Sylvester Bauer <sylv@sylv.io>
Reported-by: Zev Weiss <zev@bewilderbeest.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Available sensors are enumerated and reported by the SCMI platform server
using a 16bit identification number; not all such sensors are of a type
supported by hwmon subsystem and, among the supported ones, only a subset
could be temperature sensors that have to be registered with the Thermal
Framework.
Potential clashes between hwmon channels indexes and the underlying real
sensors IDs do not play well with the hwmon<-->thermal bridge automatic
registration routines and could need a sensible number of fake dummy
sensors to be made up in order to keep indexes and IDs in sync.
Avoid to use the hwmon<-->thermal bridge dropping the HWMON_C_REGISTER_TZ
attribute and instead explicit register temperature sensors directly with
the Thermal Framework.
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20221031114018.59048-1-cristian.marussi@arm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
At region creation time the next region-id is atomically cached so that
there is predictability of region device names. If that region is
destroyed and then a new one is created the region id increments. That
ends up looking like a memory leak, or is otherwise surprising that
identifiers roll forward even after destroying all previously created
regions.
Try to reuse rather than free old region ids at region release time.
While this fixes a cosmetic issue, the needlessly advancing memory
region-id gives the appearance of a memory leak, hence the "Fixes" tag,
but no "Cc: stable" tag.
Cc: Ben Widawsky <bwidawsk@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fixes: 779dd20cfb ("cxl/region: Add region creation support")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/166752186062.947915.13200195701224993317.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When programming port decode targets, the algorithm wants to ensure that
two devices are compatible to be programmed as peers beneath a given
port. A compatible peer is a target that shares the same dport, and
where that target's interleave position also routes it to the same
dport. Compatibility is determined by the device's interleave position
being >= to distance. For example, if a given dport can only map every
Nth position then positions less than N away from the last target
programmed are incompatible.
The @distance for the host-bridge's cxl_port in a simple dual-ported
host-bridge configuration with 2 direct-attached devices is 1, i.e. An
x2 region divided by 2 dports to reach 2 region targets.
An x4 region under an x2 host-bridge would need 2 intervening switches
where the @distance at the host bridge level is 2 (x4 region divided by
2 switches to reach 4 devices).
However, the distance between peers underneath a single ported
host-bridge is always zero because there is no limit to the number of
devices that can be mapped. In other words, there are no decoders to
program in a passthrough, all descendants are mapped and distance only
starts matters for the intervening descendant ports of the passthrough
port.
Add tracking for the number of dports mapped to a port, and use that to
detect the passthrough case for calculating @distance.
Cc: <stable@vger.kernel.org>
Reported-by: Bobo WL <lmw.bobo@gmail.com>
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: http://lore.kernel.org/r/20221010172057.00001559@huawei.com
Fixes: 27b3f8d138 ("cxl/region: Program target lists")
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/166752185440.947915.6617495912508299445.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams